-- Copyright (C) 2016 Aricent Group . All Rights Reserved. --$Id: fsrst.mib,v 1.30 2016/03/18 13:08:58 siva Exp $ ARICENT-RSTP-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------- -- Proprietary MIB for Rapid Spanning Tree Protocol -- ------------------------------------------------- IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Unsigned32, Integer32, Counter32, enterprises, NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, RowStatus FROM SNMPv2-TC dot1dStpVersion FROM RSTP-MIB dot1dBaseBridgeAddress, BridgeId, dot1dStpDesignatedRoot, dot1dStpPortState FROM BRIDGE-MIB; futureRstMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "MIB for Rapid Spanning Tree Algorithm & Protocol." REVISION "201209050000Z" DESCRIPTION "MIB for Rapid Spanning Tree Algorithm & Protocol." ::= { enterprises futuresoftware(2076) 79 } EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } Timeout ::= TEXTUAL-CONVENTION DISPLAY-HINT "d4" STATUS current DESCRIPTION " Time out value in 4 byte." SYNTAX Integer32 dot1wFutureRst OBJECT IDENTIFIER ::= { futureRstMIB 1 } dot1wFsRstTrapsControl OBJECT IDENTIFIER ::= { futureRstMIB 2 } dot1wFutureRstTraps OBJECT IDENTIFIER ::= { futureRstMIB 3 } -- dot1wFutureRst group -- SCALAR BEGIN fsRstSystemControl OBJECT-TYPE SYNTAX INTEGER { start(1), shutdown(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative system control status requested by management for the RSTP feature. The value 'start'(1) indicates that all resources required by RSTP should be allocated and RSTP should be supported in the device on all ports. The value shutdown(2) indicates that RSTP should be shutdown in the device on all ports and all allocated memory must be released." ::= { dot1wFutureRst 1 } fsRstModuleStatus OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative module status requested by management for the RSTP Module. This enables or disables RSTP in the system. A value of 'enabled' (1) indicates that RSTP must be enabled in the device on all the ports. A value of 'disabled'(2) indicates that RSTP must be disabled in the device on all the ports. This object can be set only after the object fsRstSystemControl has been set." ::= {dot1wFutureRst 2 } -- ============================================================================ -- The bit positions within a byte as used in Trace and Debug are as indicated -- below : -- ----------------------------- -- | 7 | ..................| 0 | -- ----------------------------- --The bits are numbered 0 to 7 from right to left." -- ============================================================================ fsRstTraceOption OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable Trace Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of trace levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set, then user has to give the value for this object as 3. Setting the Trace Option to any value will cause the Debug Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive." DEFVAL { 0 } ::= { dot1wFutureRst 3 } fsRstDebugOption OBJECT-TYPE SYNTAX Integer32 (0..524287) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable Debug Statements in the RSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer represents a particular level of Debug. The mapping between the bit positions & the level of debug is as follows: 0 - Init and Shutdown Debug statements 1 - Management Debug statements 2 - Memory related Debug statements 3 - BPDU related Debug statements 4 - Event Handling Debug statements 5 - Timer Module Debug statements 6 - Port Information SEM Debug statements 7 - Port Receive SEM Debug statements 8 - Role Selection SEM Debug statements 9 - Role Transition SEM Debug statements 10 - State Transition SEM Debug statements 11 - Protocol Migration SEM Debug statements 12 - Topology Change SEM Debug statements 13 - Port Transmit SEM Debug statements 14 - Bridge Detection SEM Debug statements 15 - All Failure Debug statements 16 - Redundancy code flow Debug statements 17 - State Machine variable changes Debug statements 18 - Port Receive Pseudo Information SEM Debug statements The remaining bits are unused. Combination of debug levels are also allowed. For example if the bits 0 and 1 are set, then the Debug statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are to be set, then user has to give the value for this object as 3. Setting the Debug Option to any value will cause the Trace Option to be set to 0 (i.e.) the Trace Option and Debug Option are mutually exclusive." DEFVAL { 0 } ::= { dot1wFutureRst 4 } fsRstRstpUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times RSTP Module has been enabled." ::= { dot1wFutureRst 5 } fsRstRstpDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times RSTP Module has been disabled." ::= { dot1wFutureRst 6 } fsRstBufferFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times buffer overflows/failures have occurred. A Trap is generated on the occurrence of this event." ::= { dot1wFutureRst 7 } fsRstMemAllocFailureCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times memory allocation failures have occurred. A Trap is generated on the occurrence of this event." ::= { dot1wFutureRst 8 } fsRstNewRootIdCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Bridge has detected a new Root in the topology. A Trap is generated on the occurrence of this event." ::= { dot1wFutureRst 9 } fsRstPortRoleSelSmState OBJECT-TYPE SYNTAX INTEGER { initbridge (0), roleselection (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Port Role Selection State Machine. This object will hold the value 'initbridge' when the Port Role Selection state machine is in the INIT_BRIDGE state and the value of 'roleselection' when the state machine is in the ROLE_SELECTION state." ::= { dot1wFutureRst 10 } fsRstOldDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the old root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node." ::= { dot1wFutureRst 11 } -- SCALAR END -- ------------------------------------- -- RSTP Port Extention Group -- ------------------------------------- fsRstPortExtTable OBJECT-TYPE SYNTAX SEQUENCE OF FsRstPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a table that is an extension to the dot1dStpExtPortTable. This contains object(s) that are Port-based." ::= { dot1wFutureRst 12 } fsRstPortExtEntry OBJECT-TYPE SYNTAX FsRstPortExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table is for each port present in the system. This table is indexed by the fsRstPort." INDEX { fsRstPort } ::= { fsRstPortExtTable 1 } FsRstPortExtEntry ::= SEQUENCE { fsRstPort Integer32, fsRstPortRole INTEGER, fsRstPortOperVersion INTEGER, fsRstPortInfoSmState INTEGER, fsRstPortMigSmState INTEGER, fsRstPortRoleTransSmState INTEGER, fsRstPortStateTransSmState INTEGER, fsRstPortTopoChSmState INTEGER, fsRstPortTxSmState INTEGER, fsRstPortRxRstBpduCount Counter32, fsRstPortRxConfigBpduCount Counter32, fsRstPortRxTcnBpduCount Counter32, fsRstPortTxRstBpduCount Counter32, fsRstPortTxConfigBpduCount Counter32, fsRstPortTxTcnBpduCount Counter32, fsRstPortInvalidRstBpduRxCount Counter32, fsRstPortInvalidConfigBpduRxCount Counter32, fsRstPortInvalidTcnBpduRxCount Counter32, fsRstPortProtocolMigrationCount Counter32, fsRstPortEffectivePortState TruthValue, fsRstPortAutoEdge TruthValue, fsRstPortRestrictedRole TruthValue, fsRstPortRestrictedTCN TruthValue, fsRstPortEnableBPDURx TruthValue, fsRstPortEnableBPDUTx TruthValue, fsRstPortPseudoRootId BridgeId, fsRstPortIsL2Gp TruthValue, fsRstPortLoopGuard TruthValue, fsRstPortRcvdEvent INTEGER, fsRstPortRcvdEventSubType Integer32, fsRstPortRcvdEventTimeStamp Unsigned32, fsRstPortStateChangeTimeStamp Unsigned32, fsRstPortRowStatus RowStatus, fsRstPortBpduGuard Integer32, fsRstPortRootGuard TruthValue, fsRstRootInconsistentState TruthValue, fsRstPortErrorRecovery Timeout, fsRstPortStpModeDot1wEnabled EnabledStatus, fsRstPortBpduInconsistentState TruthValue, fsRstPortBpduGuardAction Integer32 } fsRstPort OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, indicating the Port number." ::= { fsRstPortExtEntry 1 } fsRstPortRole OBJECT-TYPE SYNTAX INTEGER { disabledPort(0), alternatePort(1), backupPort(2), rootPort(3), designatedPort(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current Port Role assumed by this Port." ::= { fsRstPortExtEntry 2 } fsRstPortOperVersion OBJECT-TYPE SYNTAX INTEGER { stpCompatible(0), rstp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the Port is operationally in the RSTP mode or the Stp-compatible mode i.e., whether the Port is transmitting RST BPDUs or Config/TCN BPDUs." ::= { fsRstPortExtEntry 3 } fsRstPortInfoSmState OBJECT-TYPE SYNTAX INTEGER { disabled (0), aged (1), update (2), superior (3), repeat (4), notdesignated (5), present (6), receive (7), inferiordesignated (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Port Information state machine. This object will hold the value 'disabled' when the Port Information state machine is in the DISABLED state, the value 'aged' when the state machine is in the AGED state, the value 'update' when the state machine is in the UPDATE state, the value 'superior' when the state machine is in the SUPERIOR state, the value 'repeat' when the state machine is in the REPEAT state, the value 'notdesignated' when the state machine is in the NOT_DESIGNATED state, the value 'present' when the state machine is in the CURRENT state and the value 'receive' when the state machine is in the RECEIVE state and the value 'inferiordesignated' when the state machine is in the INFERIOR_DESIGNATED state." ::= { fsRstPortExtEntry 4 } fsRstPortMigSmState OBJECT-TYPE SYNTAX INTEGER { checkingrstp (0), selectingstp (1), sensing (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Port Protocol Migration state machine. This object will hold the value 'checkingrstp' when the Protocol Migration state machine is in the CHECKING_RSTP state, the value 'selectingstp' when the state machine is in the SELECTING_STP state, the value 'sensing' when the state machine is in the SENSING state." ::= { fsRstPortExtEntry 5 } fsRstPortRoleTransSmState OBJECT-TYPE SYNTAX INTEGER { init (0), disableport (1), disabledport (2), rootport (3), designatedport (4), backupport (5), rootproposed (6), rootagreed(7), reroot (8), rootforward (9), rootlearn (10), rerooted (11), designatedpropose (12), designatedsynced (13), designatedretired (14), designatedforward (15), designatedlearn (16), designatedlisten (17) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Port Role Transition state machine. This object will hold the value 'init' when the Port Role Transition state machine is in the INIT state, the value 'disableport' when the state machine is in the DISABLE_PORT state, the value 'disabledport' when the state machine is in the DISABLED_PORT state, the value 'rootport' when the state machine is in the ROOT_PORT state, the value 'desgport' when the state machine is in the DESIGNATED_PORT state, the value 'backupport' when the state machine is in BACKUP_PORT state, the value 'rootproposed' when the state machine is in the ROOT_PROPOSED state, the value 'rootagreed' when the state machine is in the ROOT_AGREED state, the value 'reroot' when the state machine is in the REROOT state, the value 'rootforward' when the state machine is in the ROOT_FORWARD state, the value 'rootlearn' when the state machine is in the ROOT_LEARN state, the value 'rerooted' when the state machine is in the REROOTED state, the value 'designatedpropose' when the state machine is in the DESIGNATED_PROPOSE state, the value 'designatedsynced' when the state machine is in the DESIGNATED_SYNCED state, the value 'designatedretired' when the state machine is in the DESIGNATED_RETIRED state, the value 'designatedforward', when the state machine is in the DESIGNATED_FORWARD state, the value 'designatedlearn' when the state machine is in the DESIGNATED_LEARN state and the value 'designatedlisten' when the state machine is in the DESIGNATED_LISTEN state." ::= { fsRstPortExtEntry 6 } fsRstPortStateTransSmState OBJECT-TYPE SYNTAX INTEGER { discarding (0), learning (1), forwarding (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Port State Transition state machine. This object will hold the value 'discarding' when the Port State Transition state machine is in the DISCARDING state, the value 'learning' when the state machine is in the LEARNING state and the value 'forwarding' when the state machine is in the FORWARDING state." ::= { fsRstPortExtEntry 7 } fsRstPortTopoChSmState OBJECT-TYPE SYNTAX INTEGER { inactive (0), learning (1), detected (2), active (3), notifiedtcn (4), notifiedtc (5), propagating (6), acknowledged (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Topology Change state machine. This object will hold the value 'inactive' when the Topology Change state machine is in the INACTIVE state, the value 'learning' when the state machine is in the LEARNING state, the value 'active' when the state machine is in the ACTIVE state, the value 'detected' when the state machine is in the DETECTED state, the value 'notifiedtcn' when the state machine is in the NOTIFIED_TCN state, the value 'notifiedtc' when the state machine is in the NOTIFIED_TC state, the value 'propagating' state when the state machine is in the PROPAGATING state and the value 'acknowledged' when the state machine is in the ACKNOWLEDGED state." ::= { fsRstPortExtEntry 8 } fsRstPortTxSmState OBJECT-TYPE SYNTAX INTEGER { transmitinit (0), transmitperiodic (1), transmitconfig (2), transmittcn (3), transmitrstp (4), idle (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the current state of the Port Transmit state machine. This object will hold the value 'transmitinit' when the Port Transmit state machine is in the TRANSMIT_INIT state, the value 'transmitperiodic' when the state machine is in the TRANSMIT_PERIODIC state, the value 'transmitconfig' when the state machine is in the TRANSMIT_CONFIG state, the value 'transmittcn',when the state machine is in the TRANSMIT_TCN state, the value 'transmitrstp', when the state machine is in the TRANSMIT_RSTP state and the value 'idle' when the state machine is in the IDLE state." ::= { fsRstPortExtEntry 9 } fsRstPortRxRstBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RST BPDUs that have been received on this Port." ::= { fsRstPortExtEntry 10 } fsRstPortRxConfigBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Config BPDUs that have been received on this Port." ::= { fsRstPortExtEntry 11 } fsRstPortRxTcnBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TCN BPDUs that have been received on this Port." ::= { fsRstPortExtEntry 12 } fsRstPortTxRstBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RST BPDUs that have been transmitted by this Port." ::= { fsRstPortExtEntry 13 } fsRstPortTxConfigBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Config BPDUs that have been transmitted by this Port." ::= { fsRstPortExtEntry 14 } fsRstPortTxTcnBpduCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TCN BPDUs that have been transmitted by this Port." ::= { fsRstPortExtEntry 15 } fsRstPortInvalidRstBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid RSTP BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event." ::= { fsRstPortExtEntry 16 } fsRstPortInvalidConfigBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid Configuration BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event." ::= { fsRstPortExtEntry 17 } fsRstPortInvalidTcnBpduRxCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid TCN BPDUs that have been received on this Port. A Trap is generated on the occurrence of this event." ::= { fsRstPortExtEntry 18 } fsRstPortProtocolMigrationCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP. A Trap is generated on the occurrence of this event." ::= { fsRstPortExtEntry 19 } fsRstPortEffectivePortState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The effective operational state of the port. This object will be set to TRUE only when the port is operationally up in the interface manager and the force Port State for this port and specified port state is enabled. Otherwise, this object is set to FALSE." ::= { fsRstPortExtEntry 20 } fsRstPortAutoEdge OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled." ::= { fsRstPortExtEntry 21 } fsRstPortRestrictedRole OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE, causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected. This parameter should be FALSE by default. If set, it can cause lack of spanning tree connectivity. It is set by a network administrator to prevent bridges external to a core region of the network influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. This administrator configuration is also known as 'Root Guard'." ::= {fsRstPortExtEntry 22} fsRstPortRestrictedTCN OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE, causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set, it can cause temporary loss of connectivity after changes in a spanning trees active topology as a result of persistent incorrectly learnt station location information. It is set by a network administrator to prevent bridges external to a core region of the network causing address flushing in that region, possibly because those bridges are not under the full control of the administrator or MAC_Operational for the attached LANs transitions frequently." ::= {fsRstPortExtEntry 23} fsRstPortEnableBPDURx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If FALSE, the BPDUs received on the port are ignored." DEFVAL { true } ::= { fsRstPortExtEntry 24 } fsRstPortEnableBPDUTx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If FALSE, no BPDUs are transmitted by this port. This variable should be FALSE before configuring port as a Layer Two Gateway Port." DEFVAL { true } ::= { fsRstPortExtEntry 25 } fsRstPortPseudoRootId OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-write STATUS current DESCRIPTION "In RSTP Bridge, the fsRstPortPseudoRootId parameter value. By default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway Port as the RootId in generated BPDUs." ::= { fsRstPortExtEntry 26 } fsRstPortIsL2Gp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE, then port is functioning as a Layer Two Gateway Port. The fsRstPortEnableBPDUTx should be FALSE to set fsRstPortIsL2Gp to TRUE." DEFVAL { false } ::= { fsRstPortExtEntry 27 } fsRstPortLoopGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to receive information through BPDUs the operation on this port will be normal. This will be useful when the neighbor bridge is faulty, i.e. it cannot send BPDUs but continues to send data traffic." DEFVAL { false } ::= { fsRstPortExtEntry 28 } fsRstPortRcvdEvent OBJECT-TYPE SYNTAX INTEGER { configurationEvent (1), bpduEvent (2), timerExpiryEvent (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives information about the recently received event in the system.Currently, we support only ConfigurationEvent." ::= { fsRstPortExtEntry 29 } fsRstPortRcvdEventSubType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstPortRcvdEvent. For ConfigurationEvent, the sub-types supported are PortUp and PortDown." ::= { fsRstPortExtEntry 30 } fsRstPortRcvdEventTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the time stamp (in milli seconds) at which the event specified by the object fsRstPortRcvdEvent was received in the system. This object was introduced to measure the convergence time in RSTP module." ::= { fsRstPortExtEntry 31 } fsRstPortStateChangeTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the time stamp (in milli seconds) when the port state is updated to forwarding path for any instance on this port. This object is introduced to measure the convergence time in RSTP module." ::= { fsRstPortExtEntry 32 } fsRstPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create or delete interfaces at RSTP module level. Ports can be created at RSTP module level only for ports that have been created in Interface manager.This is applicable only when Automatic Port Create Feature is Disabled." ::= { fsRstPortExtEntry 33 } fsRstPortBpduGuard OBJECT-TYPE SYNTAX INTEGER { none (0), enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This configures the BPDU guard feature on this port and has higher priority over Global BPDU Guard. Enable - prevents temporary loops and applicable to ports and moves the port to disabled discarding state when BPDU is received on this port. Disable - Disables the Bpdu Guard feature and the port state will be maintained till it is manually made up. None - removes the BPDU Guard functionality on this port so that when Global BPDU guard configuration will take effect if this port is edge port." DEFVAL { 0 } ::= { fsRstPortExtEntry 34 } fsRstPortRootGuard OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Designated Port after the Root Port has been selected. This parameter should be FALSE by default. If set, it can cause lack of spanning tree connectivity. It is set by a network administrator to prevent bridges external to a core region of the network influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. This administrator configuration is also known as 'Root Guard'." DEFVAL { false } ::= {fsRstPortExtEntry 35} fsRstRootInconsistentState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A Boolean value set when the designated port receives a superior BPDU trying to transition itself to the Root Port. A value of TRUE indicates that the state of this port is moved into a root-inconsistent state. A value of FALSE indicates that this port is not moved into a root-inconsistent state." DEFVAL { false } ::= { fsRstPortExtEntry 36} fsRstPortErrorRecovery OBJECT-TYPE SYNTAX Timeout (3000..6553500) UNITS "centi-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time to bring the interface out of the error-disabled (err-disabled) state. The range is from 30 to 65535 seconds." DEFVAL { 30000 } ::= { fsRstPortExtEntry 37 } fsRstPortStpModeDot1wEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables/disables the bridge to send agreement pdu in accordance with 802.1W. A value of 'enabled' (1) indicates the bridge to send agreement pdu in accordance with 802.1W.A value of 'disabled'(2) indicates the bridge to send agreement pdu in accordance with 802.1D." DEFVAL { disabled } ::= { fsRstPortExtEntry 38 } fsRstPortBpduInconsistentState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A Boolean value set indicates the port state goes to disabled / discarding due to the BPDU guard feature enabled on the port and the port receives BPDU on this.A value of TRUE indicates that the state of this port is moved into an bpduguard-inconsistent state due to BPDU reception.A value of FALSE indicates that this port is not received the BPDU when BPDU guard is enabled on this port or BPDU guard feature is disabled on that port." DEFVAL { false } ::= { fsRstPortExtEntry 39 } fsRstPortBpduGuardAction OBJECT-TYPE SYNTAX INTEGER { disable-discarding (1), admin-down (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the action to be taken when BPDU is received on a BPDU guard enabled port. When action is set as admin down error recovery time will be set as zero. When action is set as disable-discarding, error recovery time will be set as 3000 centi-seconds. When action is set as admin down and BPDU is received on this port, then the port will be made down. When port is made admin up again, port moves to admin down if BPDU is received on this port. When BPDU is received in case of disable-discarding state, spanning-tree will be disabled on this port and port will move to discarding state. On expiry of error recovery timer, spanning tree will be enabled on the port. When BPDU is received again, spanning-tree will be disabled on the port and port moves to discarding state To recover from the admin down or disable discarding state, BPDU guard should be disabled on this port." DEFVAL { 1 } ::= { fsRstPortExtEntry 40 } -- END OF TABLE -- SCALAR ADDED fsRstDynamicPathcostCalculation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed(when the operational status of the port changes from down to up). Otherwise, the link speed at the time of port creation is used for calculating the path cost. In both cases, if the user has configured a pathcost for the port that will be used. By default, dynamic pathcost calculation is set to false." DEFVAL { false } ::= { dot1wFutureRst 13 } fsRstCalcPortPathCostOnSpeedChg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended for Link Aggregated ports,where depending on Active ports, speed of Link aggregated port changes. By default, dynamic pathcost calculation on change in speed is set to false." DEFVAL { false } ::= { dot1wFutureRst 14 } fsRstRcvdEvent OBJECT-TYPE SYNTAX INTEGER{ configurationEvent (1), bpduEvent (2), timerExpiryEvent (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives information about the recently received event in the system. Currently, we support only ConfigurationEvent." ::= { dot1wFutureRst 15 } fsRstRcvdEventSubType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives information about sub-type of the event received in the system recently. The value of this object depends on the value of the object fsRstRcvdEvent.For ConfigurationEvent, the sub-types supported are PortUp and PortDown." ::= { dot1wFutureRst 16 } fsRstRcvdEventTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp (in milli seconds) at which event specified by the object fsRstRcvdEvent was received in the system at STP module for the last time. This object is introduced to measure the convergence time in RSTP module." ::= { dot1wFutureRst 17 } fsRstRcvdPortStateChangeTimeStamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time stamp (in milli seconds) at which port state has been changed in the system. This object is introduced to measure the convergence time in RSTP module." ::= { dot1wFutureRst 18 } fsRstBpduGuard OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures BPDU guard globally in RSTP and this global BPDU is applicable if and only if no Port specific BpduGuard is configured. Enable - enables BPDU Guard feature on edge ports globally and moves the port to disabled discarding state when BPDU is received on the edge ports. Disable - disables BPDU Guard feature on edge ports globally." DEFVAL { 2 } ::= { dot1wFutureRst 19 } fsRstStpPerfStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables the collection of performance data for the RSTP protocol. 'enable' (1) indicates that collection of RSTP performance data is enabled on all ports in the device. 'disable'(2)indicates the collection of RSTP performance data is disabled on all ports in the device." DEFVAL { 2 } ::= { dot1wFutureRst 20} -- SCALAR END -- TRAP MIB BEGIN fsRstSetTraps OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable and disable specific RSTP traps. Currently, the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like memory failure or buffer failure or port protocol migration or invalid packet rcvd in port 3 - All the above Traps." ::= { dot1wFsRstTrapsControl 1 } fsRstGenTrapType OBJECT-TYPE SYNTAX INTEGER { none (0), up (1), down (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The general events like none - none of the below values up - protocol UP, down - protocol DOWN." ::= { dot1wFsRstTrapsControl 2 } fsRstErrTrapType OBJECT-TYPE SYNTAX INTEGER { none (0), memfail (1), bufffail (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The error event like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure." ::= { dot1wFsRstTrapsControl 3 } fsRstPortTrapNotificationTable OBJECT-TYPE SYNTAX SEQUENCE OF FsRstPortTrapNotificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table is used to store the notification information occurred in each of the port for protocol migration and invalid packet received." ::= { dot1wFsRstTrapsControl 4 } fsRstPortTrapNotificationEntry OBJECT-TYPE SYNTAX FsRstPortTrapNotificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This entry is used to store the notification information." INDEX { fsRstPortTrapIndex} ::= { fsRstPortTrapNotificationTable 1 } FsRstPortTrapNotificationEntry ::= SEQUENCE { fsRstPortTrapIndex Integer32, fsRstPortMigrationType INTEGER, fsRstPktErrType INTEGER, fsRstPktErrVal Integer32, fsRstPortRoleType INTEGER, fsRstOldRoleType INTEGER } fsRstPortTrapIndex OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value, greater than zero, indicating the Port number." ::= { fsRstPortTrapNotificationEntry 1 } fsRstPortMigrationType OBJECT-TYPE SYNTAX INTEGER { sendstp (0), sendrstp (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Port Protocol migration type occurred in the port." ::= { fsRstPortTrapNotificationEntry 2 } fsRstPktErrType OBJECT-TYPE SYNTAX INTEGER { protocolIdErr(0), invalidBpdu(1), configLengthErr(2), tcnLengthErr(3), rstpLengthErr(4), maxAgeErr(5), fwdDelayErr(6), helloTimeErr(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of invalid packet received in each of the port." ::= { fsRstPortTrapNotificationEntry 3 } fsRstPktErrVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet error value corresponding to the above type." ::= { fsRstPortTrapNotificationEntry 4 } fsRstPortRoleType OBJECT-TYPE SYNTAX INTEGER { disabledPort(0), alternatePort(1), backupPort(2), rootPort(3), designatedPort(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Particular Role Selected for the Port." ::= { fsRstPortTrapNotificationEntry 5 } fsRstOldRoleType OBJECT-TYPE SYNTAX INTEGER { disabledPort(0), alternatePort(1), backupPort(2), rootPort(3), designatedPort(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Particular Role which is existing for the Port." ::= { fsRstPortTrapNotificationEntry 6 } fsRstTraps OBJECT IDENTIFIER ::= { dot1wFutureRstTraps 0 } fsRstGenTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, fsRstGenTrapType } STATUS current DESCRIPTION "Generated when any of the general events like protocol up or protocol down occurs." ::= { fsRstTraps 1 } fsRstErrTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, fsRstErrTrapType } STATUS current DESCRIPTION "Generated when any of the error events like memory failure or buffer failure occurs." ::= { fsRstTraps 2 } fsRstNewRootTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, fsRstOldDesignatedRoot, dot1dStpDesignatedRoot } STATUS current DESCRIPTION "Generated whenever a new root bridge is selected in the topology." ::= { fsRstTraps 3 } fsRstTopologyChgTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress } STATUS current DESCRIPTION "Generated when topology change is detected." ::= { fsRstTraps 4 } fsRstProtocolMigrationTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, dot1dStpVersion, fsRstPortMigrationType } STATUS current DESCRIPTION "Generated when port protocol migration happens in the port." ::= { fsRstTraps 5 } fsRstInvalidBpduRxdTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, fsRstPktErrType, fsRstPktErrVal } STATUS current DESCRIPTION "Generated when the invalid packet is received for bpdu/stp/rstp/maximum age/forward delay/hello time." ::= { fsRstTraps 6 } fsRstNewPortRoleTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, fsRstPortRoleType, fsRstOldRoleType } STATUS current DESCRIPTION "Generated whenever a new role is selected for the port." ::= { fsRstTraps 7 } fsRstHwFailureTrap NOTIFICATION-TYPE OBJECTS { dot1dBaseBridgeAddress, dot1dStpPortState } STATUS current DESCRIPTION "Generated whenever an NPAPI call, that is invoked from the protocol to program the hardware port state, fails." ::= { fsRstTraps 8 } -- TRAP MIB END END