-- Copyright (C) 2006-2012 Aricent Group . All Rights Reserved -- $Id: fsrmon.mib,v 1.9 2013/10/28 09:51:44 siva Exp $ ARICENT-RMON-MIB DEFINITIONS ::= BEGIN -- Remote Network Monitoring MIB -- Enterprises MIB for RMON product (for Trace). IMPORTS etherStatsEntry, historyControlEntry, etherHistoryEntry FROM RMON-MIB MODULE-IDENTITY, OBJECT-TYPE, enterprises, Unsigned32, Integer32, Counter32, Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; futrmon MODULE-IDENTITY LAST-UPDATED "201406190000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION " This MIB module is for managing RMON implementations." -- revision history REVISION "201406190000Z" DESCRIPTION " This MIB module is for managing RMON implementations. Ether Statistics group supports the monitoring of different statistics on ethernet interfaces, which is enhanced to support statistics per VLAN. The etherStatsDatasource of etherStats table identifies the source of data that is configured to analyze. Now Ether Statistics group supports the monitoring of further statistics and they can be collected per service." REVISION "201209050000Z" DESCRIPTION " This MIB module is for managing RMON implementations. Ether Statistics group supports the monitoring of different statistics on ethernet interfaces, which is enhanced to support statistics per VLAN The etherStatsDatasource of etherStats table identifies the source of data that is configured to analyze. Now this source can be set to either interface OID or VLAN OID. If configured for interface OID the statistics collection is set to be on Interface and if the source is set to VLAN OID the statistics collection is set to be on any of the VLAN configured in the device." ::= { enterprises futuresoftware (2076) 44 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- VIDOrZero ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The VLAN ID that uniquely identifies a VLAN. The value zero is NOT a valid VLAN ID. When this value is set, the displayed statistics are not differentiated for VLAN." SYNTAX Unsigned32 (0 | 1..4094) PriorityOrNegative ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "The VLAN priority. The value -1 is NOT a valid priority. When this value is set, the displayed statistics are not differentiated for priority." SYNTAX Integer32 (-1 | 0..7) -- FutreRmon Trace enable/disable object rmonDebugType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled debug flag for rmon" ::= { futrmon 1 } -- FutreRmon enable/disable status object rmonEnableStatus OBJECT-TYPE SYNTAX INTEGER { rmonenabled(1), rmondisabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the rmonenable flag for rmon" ::= { futrmon 2 } -- FutreRmon stats supported object rmonHwStatsSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the flag for whether HW supports Etherstatistics or not " ::= { futrmon 3 } -- FutreRmon HW history supported object rmonHwHistorySupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWhistorysupp flag for rmon" ::= { futrmon 4 } -- FutreRmon HWalarmsupported object rmonHwAlarmSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWAlarmsupp flag for rmon" ::= { futrmon 5 } -- FutreRmon HWHostsupported object rmonHwHostSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWhostsupp flag for rmon" ::= { futrmon 6 } -- FutreRmon HW hosttopN supported object rmonHwHostTopNSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWHostTopN flag for rmon" ::= { futrmon 7 } -- FutreRmon HW matrix supported object rmonHwMatrixSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWMatrix flag for rmon" ::= { futrmon 8 } -- FutreRmon HW Event supported object rmonHwEventSupp OBJECT-TYPE SYNTAX INTEGER { notsupported(0), supported(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "This object defines the enabled HWEvent flag for rmon" ::= { futrmon 9 } -- Tabular Objects -- rmonStatsTable rmonStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RmonStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is a enhancement of etherStatsTable in stdrmon.mib." ::= {futrmon 10} rmonStatsEntry OBJECT-TYPE SYNTAX RmonStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry containing Statistics information (e.g., OutFCSError)." AUGMENTS {etherStatsEntry} ::= {rmonStatsTable 1} RmonStatsEntry ::= SEQUENCE { rmonStatsOutFCSErrors Counter32, rmonStatsPkts1519to1522Octets Counter32 } rmonStatsOutFCSErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted with an invalid FCS. Whenever a frame is modified during transmission (e.g., to add or remove a tag) the frame's original FCS is inspected before a new FCS is added to a modified frame. If the original FCS is invalid, the new FCS is made invalid too and this counter is incremented." ::={rmonStatsEntry 1} rmonStatsPkts1519to1522Octets OBJECT-TYPE SYNTAX Counter32 UNITS "Packets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) received that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets)." ::={rmonStatsEntry 2} -- sEtherStatsTable sEtherStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SEtherStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is a further enhancement of etherStatsTable in stdrmon.mib to allow a collection of statistics kept for Ethernet interface and service." ::= {futrmon 11} sEtherStatsEntry OBJECT-TYPE SYNTAX SEtherStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry containing Statistics information (e.g. InUCastPkts)." AUGMENTS {etherStatsEntry} ::= {sEtherStatsTable 1} SEtherStatsEntry ::= SEQUENCE { sEtherStatsInPkts Counter32, sEtherStatsInOverflowPkts Counter32, sEtherStatsInHCPkts Counter64, sEtherStatsOutPkts Counter32, sEtherStatsOutOverflowPkts Counter32, sEtherStatsOutHCPkts Counter64, sEtherStatsInOctets Counter32, sEtherStatsInOverflowOctets Counter32, sEtherStatsInHCOctets Counter64, sEtherStatsOutOctets Counter32, sEtherStatsOutOverflowOctets Counter32, sEtherStatsOutHCOctets Counter64, sEtherStatsInDiscard Counter32, sEtherStatsInOverflowDiscard Counter32, sEtherStatsInHCDiscard Counter64, sEtherStatsOutDiscard Counter32, sEtherStatsOutOverflowDiscard Counter32, sEtherStatsOutHCDiscard Counter64, sEtherStatsInUCastPkts Counter32, sEtherStatsInUCastOverflowPkts Counter32, sEtherStatsInUCastHCPkts Counter64, sEtherStatsOutUCastPkts Counter32, sEtherStatsOutUCastOverflowPkts Counter32, sEtherStatsOutUCastHCPkts Counter64, sEtherStatsInNUCastPkts Counter32, sEtherStatsInNUCastOverflowPkts Counter32, sEtherStatsInNUCastHCPkts Counter64, sEtherStatsOutNUCastPkts Counter32, sEtherStatsOutNUCastOverflowPkts Counter32, sEtherStatsOutNUCastHCPkts Counter64, sEtherStatsOuterVid VIDOrZero, sEtherStatsOuterPriority PriorityOrNegative, sEtherStatsInnerVid VIDOrZero } sEtherStatsInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received packets." ::={sEtherStatsEntry 1} sEtherStatsInOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsInPkts counter has overflowed." ::={sEtherStatsEntry 2} sEtherStatsInHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of received packets." ::={sEtherStatsEntry 3} sEtherStatsOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted packets." ::={sEtherStatsEntry 4} sEtherStatsOutOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsOutPkts counter has overflowed." ::={sEtherStatsEntry 5} sEtherStatsOutHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of transmitted packets." ::={sEtherStatsEntry 6} sEtherStatsInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received octets." ::={sEtherStatsEntry 7} sEtherStatsInOverflowOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsInOctets counter has overflowed." ::={sEtherStatsEntry 8} sEtherStatsInHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of received octets." ::={sEtherStatsEntry 9} sEtherStatsOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted octets." ::={sEtherStatsEntry 10} sEtherStatsOutOverflowOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsOutOctets counter has overflowed." ::={sEtherStatsEntry 11} sEtherStatsOutHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of transmitted octets." ::={sEtherStatsEntry 12} sEtherStatsInDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets which were discarded." ::={sEtherStatsEntry 13} sEtherStatsInOverflowDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsInDiscard counter has overflowed." ::={sEtherStatsEntry 14} sEtherStatsInHCDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received packets which were discarded." ::={sEtherStatsEntry 15} sEtherStatsOutDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets to be transmitted which were discarded." ::={sEtherStatsEntry 16} sEtherStatsOutOverflowDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsOutDiscard counter has overflowed." ::={sEtherStatsEntry 17} sEtherStatsOutHCDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of packets to be transmitted which were discarded." ::={sEtherStatsEntry 18} sEtherStatsInUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received unicast packets." ::={sEtherStatsEntry 19} sEtherStatsInUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsInUCastPkts counter has overflowed." ::={sEtherStatsEntry 20} sEtherStatsInUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received unicast packets." ::={sEtherStatsEntry 21} sEtherStatsOutUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted unicast packets." ::={sEtherStatsEntry 22} sEtherStatsOutUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsOutUCastPkts counter has overflowed." ::={sEtherStatsEntry 23} sEtherStatsOutUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of transmitted unicast packets." ::={sEtherStatsEntry 24} sEtherStatsInNUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received not unicast packets." ::={sEtherStatsEntry 25} sEtherStatsInNUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsInNUCastPkts counter has overflowed." ::={sEtherStatsEntry 26} sEtherStatsInNUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received not unicast packets." ::={sEtherStatsEntry 27} sEtherStatsOutNUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted not unicast packets." ::={sEtherStatsEntry 28} sEtherStatsOutNUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherStatsOutNUCastPkts counter has overflowed." ::={sEtherStatsEntry 29} sEtherStatsOutNUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of transmitted not unicast packets." ::={sEtherStatsEntry 30} sEtherStatsOuterVid OBJECT-TYPE SYNTAX VIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The outer vlan identifier." DEFVAL { 0 } ::={sEtherStatsEntry 31} sEtherStatsOuterPriority OBJECT-TYPE SYNTAX PriorityOrNegative MAX-ACCESS read-create STATUS current DESCRIPTION "The priority code point." DEFVAL { -1 } ::={sEtherStatsEntry 32} sEtherStatsInnerVid OBJECT-TYPE SYNTAX VIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The inner vlan identifier." DEFVAL { 0 } ::={sEtherStatsEntry 33} -- sHistoryControlTable sHistoryControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SHistoryControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is an enhancement of historyTable in stdrmon.mib." ::= {futrmon 12} sHistoryControlEntry OBJECT-TYPE SYNTAX SHistoryControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that set up a periodic sampling of statistic." AUGMENTS {historyControlEntry} ::= {sHistoryControlTable 1} SHistoryControlEntry ::= SEQUENCE { sHistoryControlOuterVid VIDOrZero, sHistoryControlOuterPriority PriorityOrNegative, sHistoryControlInnerVid VIDOrZero, sHistoryControlPersistence INTEGER } sHistoryControlOuterVid OBJECT-TYPE SYNTAX VIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The outer vlan identifier." DEFVAL { 0 } ::={sHistoryControlEntry 1} sHistoryControlOuterPriority OBJECT-TYPE SYNTAX PriorityOrNegative MAX-ACCESS read-create STATUS current DESCRIPTION "The priority code point." DEFVAL { -1 } ::={sHistoryControlEntry 2} sHistoryControlInnerVid OBJECT-TYPE SYNTAX VIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The inner vlan identifier." DEFVAL { 0 } ::={sHistoryControlEntry 3} sHistoryControlPersistence OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the persistence flag for history collections." DEFVAL { disable } ::={sHistoryControlEntry 4} -- sEtherHistoryTable sEtherHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF SEtherHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is an enhancement of etherHistoryTable in stdrmon.mib." ::= {futrmon 13} sEtherHistoryEntry OBJECT-TYPE SYNTAX SEtherHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An historical sample of Ethernet statistics on a specific history control pattern (e.g. historyControlDataSource - sHistoryControlOuterVid)." AUGMENTS {etherHistoryEntry} ::= {sEtherHistoryTable 1} SEtherHistoryEntry ::= SEQUENCE { sEtherHistoryInPkts Counter32, sEtherHistoryInOverflowPkts Counter32, sEtherHistoryInHCPkts Counter64, sEtherHistoryOutPkts Counter32, sEtherHistoryOutOverflowPkts Counter32, sEtherHistoryOutHCPkts Counter64, sEtherHistoryInOctets Counter32, sEtherHistoryInOverflowOctets Counter32, sEtherHistoryInHCOctets Counter64, sEtherHistoryOutOctets Counter32, sEtherHistoryOutOverflowOctets Counter32, sEtherHistoryOutHCOctets Counter64, sEtherHistoryInDiscard Counter32, sEtherHistoryInOverflowDiscard Counter32, sEtherHistoryInHCDiscard Counter64, sEtherHistoryOutDiscard Counter32, sEtherHistoryOutOverflowDiscard Counter32, sEtherHistoryOutHCDiscard Counter64, sEtherHistoryInUCastPkts Counter32, sEtherHistoryInUCastOverflowPkts Counter32, sEtherHistoryInUCastHCPkts Counter64, sEtherHistoryOutUCastPkts Counter32, sEtherHistoryOutUCastOverflowPkts Counter32, sEtherHistoryOutUCastHCPkts Counter64, sEtherHistoryInNUCastPkts Counter32, sEtherHistoryInNUCastOverflowPkts Counter32, sEtherHistoryInNUCastHCPkts Counter64, sEtherHistoryOutNUCastPkts Counter32, sEtherHistoryOutNUCastOverflowPkts Counter32, sEtherHistoryOutNUCastHCPkts Counter64, sEtherHistoryTimestamp Unsigned32 } sEtherHistoryInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received packets." ::={sEtherHistoryEntry 1} sEtherHistoryInOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryInPkts counter has overflowed." ::={sEtherHistoryEntry 2} sEtherHistoryInHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of received packets." ::={sEtherHistoryEntry 3} sEtherHistoryOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted packets." ::={sEtherHistoryEntry 4} sEtherHistoryOutOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryOutPkts counter has overflowed." ::={sEtherHistoryEntry 5} sEtherHistoryOutHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of transmitted packets." ::={sEtherHistoryEntry 6} sEtherHistoryInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received octets." ::={sEtherHistoryEntry 7} sEtherHistoryInOverflowOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryInOctets counter has overflowed." ::={sEtherHistoryEntry 8} sEtherHistoryInHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of received octets." ::={sEtherHistoryEntry 9} sEtherHistoryOutOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted octets." ::={sEtherHistoryEntry 10} sEtherHistoryOutOverflowOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryOutOctets counter has overflowed." ::={sEtherHistoryEntry 11} sEtherHistoryOutHCOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of transmitted octets." ::={sEtherHistoryEntry 12} sEtherHistoryInDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets which were discarded." ::={sEtherHistoryEntry 13} sEtherHistoryInOverflowDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryInDiscard counter has overflowed." ::={sEtherHistoryEntry 14} sEtherHistoryInHCDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received packets which were discarded." ::={sEtherHistoryEntry 15} sEtherHistoryOutDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets to be transmitted which were discarded." ::={sEtherHistoryEntry 16} sEtherHistoryOutOverflowDiscard OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryOutDiscard counter has overflowed." ::={sEtherHistoryEntry 17} sEtherHistoryOutHCDiscard OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of packets to be transmitted which were discarded." ::={sEtherHistoryEntry 18} sEtherHistoryInUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received unicast packets." ::={sEtherHistoryEntry 19} sEtherHistoryInUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryInUCastPkts counter has overflowed." ::={sEtherHistoryEntry 20} sEtherHistoryInUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received unicast packets." ::={sEtherHistoryEntry 21} sEtherHistoryOutUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted unicast packets." ::={sEtherHistoryEntry 22} sEtherHistoryOutUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryOutUCastPkts counter has overflowed." ::={sEtherHistoryEntry 23} sEtherHistoryOutUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of transmitted unicast packets." ::={sEtherHistoryEntry 24} sEtherHistoryInNUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received not unicast packets." ::={sEtherHistoryEntry 25} sEtherHistoryInNUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryInNUCastPkts counter has overflowed." ::={sEtherHistoryEntry 26} sEtherHistoryInNUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received not unicast packets." ::={sEtherHistoryEntry 27} sEtherHistoryOutNUCastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted not unicast packets." ::={sEtherHistoryEntry 28} sEtherHistoryOutNUCastOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated sEtherHistoryOutNUCastPkts counter has overflowed." ::={sEtherHistoryEntry 29} sEtherHistoryOutNUCastHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of transmitted not unicast packets." ::={sEtherHistoryEntry 30} sEtherHistoryTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in secs) since 01-Gen-1970 when this sample was closed." ::={sEtherHistoryEntry 31} rmonGlobalClearCounters OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear all the rmon counters. Setting this object to true will cause the statistics to be reset and setting this object to false will have no effect. A Get operation on this object will always return a value of false." DEFVAL { false } ::= { futrmon 14 } rmonInterfaceClearCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF RmonInterfaceClearCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to clear the interface rmon counters." ::= { futrmon 15} rmonInterfaceClearCountersEntry OBJECT-TYPE SYNTAX RmonInterfaceClearCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry appears in this table to clear the interface rmon counters. Index to the table is the interface index of the port." INDEX { rmonIfindex } ::= { rmonInterfaceClearCountersTable 1} RmonInterfaceClearCountersEntry ::= SEQUENCE { rmonIfindex Integer32, rmonInterfaceClearCounters TruthValue } rmonIfindex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of the port for which the counters are to be cleared." ::= { rmonInterfaceClearCountersEntry 1} rmonInterfaceClearCounters OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear all the rmon interface counters. Setting this object to true will cause the statistics to be reset and setting this object to false will have no effect. A Get operation on this object will always return a value of false." DEFVAL { false } ::= {rmonInterfaceClearCountersEntry 2 } -- Extension of the etherStatsTable etherStatsTxTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherStatsTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is a further enhancement of etherStatsTable in stdrmon.mib to allow a collection of statistics kept for particular Ethernet interface." ::= { futrmon 16 } etherStatsTxEntry OBJECT-TYPE SYNTAX EtherStatsTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Entry containing Statistics information (e.g. OutUCastPkts)." AUGMENTS { etherStatsEntry } ::= { etherStatsTxTable 1 } EtherStatsTxEntry ::= SEQUENCE { etherStatsTxOverflowOctets Counter32, etherStatsTxOctets Counter64, etherStatsTxOverflowPkts Counter32, etherStatsTxPkts Counter64, etherStatsTxBroadcastPkts Counter64, etherStatsTxMulticastPkts Counter64, etherStatsTxDiscardPkts Counter64 } etherStatsTxOverflowOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsOctets counter has overflowed." ::= { etherStatsTxEntry 1 } etherStatsTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets of data (including bad packets) transmitted from the network." ::= { etherStatsTxEntry 2 } etherStatsTxOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherStatsPkts counter has overflowed." ::= { etherStatsTxEntry 3 } etherStatsTxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets) transmitted from the network." ::= { etherStatsTxEntry 4 } etherStatsTxBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of broadcast packets transmitted from the network. Note that this does not include multicast packets." ::= { etherStatsTxEntry 5 } etherStatsTxMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of multicast packets transmitted from the network." ::= { etherStatsTxEntry 6 } etherStatsTxDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets to be transmitted which were discarded from the network." ::= { etherStatsTxEntry 7 } -- Extension for the etherHistoryTable etherHistoryTxTable OBJECT-TYPE SYNTAX SEQUENCE OF EtherHistoryTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is an enhancement of etherHistoryTable in stdrmon.mib." ::= { futrmon 17 } etherHistoryTxEntry OBJECT-TYPE SYNTAX EtherHistoryTxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An historical sample of Ethernet statistics on a specific history control pattern." ::= { etherHistoryTxTable 1 } EtherHistoryTxEntry ::= SEQUENCE { etherHistoryTxOverflowOctets Counter32, etherHistoryTxOctets Counter64, etherHistoryTxOverflowPkts Counter32, etherHistoryTxPkts Counter64, etherHistoryTxBroadcastPkts Counter64, etherHistoryTxMulticastPkts Counter64, etherHistoryTxUtilization Integer32, etherHistoryTxDiscardPkts Counter64 } etherHistoryTxOverflowOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherHistoryOctets counter has overflowed during sampling interval." ::= { etherHistoryTxEntry 1 } etherHistoryTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted octets from the network during sampling interval." ::= { etherHistoryTxEntry 2 } etherHistoryTxOverflowPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the associated etherHistoryPkts overflowed during this sampling interval." ::= { etherHistoryTxEntry 3 } etherHistoryTxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets transmitted during this sampling interval." ::= { etherHistoryTxEntry 4 } etherHistoryTxBroadcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of broadcast packets received during this sampling interval." ::= { etherHistoryTxEntry 5 } etherHistoryTxMulticastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good packets received during this sampling interval." ::= { etherHistoryTxEntry 6 } etherHistoryTxUtilization OBJECT-TYPE SYNTAX Integer32 (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the mean physical layer network utilization on this interface during sampling interval, in hundredths of a percent." ::= { etherHistoryTxEntry 7 } etherHistoryTxDiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets discarded during this sampling interval." ::= { etherHistoryTxEntry 8} END