-- Copyright (C) 2008-2016 Aricent. All Rights Reserved -- $Id: fsmiy1731.mib,v 1.26 2016/03/24 10:16:12 siva Exp $ -- ECFM-Y1731 Proprietary MIB Definition -- This MIB contains tables used to configure a switch running -- ECFM-Y1731 in addition to the standard 802.1ag MIB and -- ECFM Proprietary MIB. ARICENT-ECFM-Y1731-MI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Integer32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue, DisplayString, TimeInterval, TimeStamp, MacAddress, RowStatus, RowPointer FROM SNMPv2-TC InterfaceIndex FROM IF-MIB Dot1agCfmMepId, Dot1agCfmMDLevelOrNone, Dot1agCfmMepIdOrZero FROM IEEE8021-CFM-MIB VlanId FROM Q-BRIDGE-MIB ; fsMIY1731MIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "The Proprietary MIB for ECFM-Y1731 module with multiple instance capability" REVISION "201209050000Z" DESCRIPTION "The Proprietary MIB for ECFM-Y1731 module with multiple instance capability" ::= { enterprises aricent-communication-holding-ltd(29601) iss(2) 7 } fsMIY1731Notifications OBJECT IDENTIFIER ::= { fsMIY1731MIB 0 } fsMIY1731MIBObjects OBJECT IDENTIFIER ::= { fsMIY1731MIB 1 } -- ****************************************************************** -- Groups in the ECFM-Y1731 MIB Module -- ****************************************************************** fsMIY1731System OBJECT IDENTIFIER ::= { fsMIY1731MIBObjects 1 } fsMIY1731Context OBJECT IDENTIFIER ::= { fsMIY1731MIBObjects 2 } -- ****************************************************************** -- Textual conventions -- ****************************************************************** FsY1731CcmApplication ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies an enumerated value indicates the ETH-CC role to be or currently being performed. ccFaultManagement(0) Indicates ETH-CC is used for Fault Management. ccPerformanceMonitoring(1) Indicates ETH-CC is used for Performance Monitoring. ccProtectionSwitching(2) Indicates ETH-CC is used for Protection Switching " SYNTAX INTEGER { ccFaultManagement (0), ccPerformanceMonitoring (1), ccProtectionSwitching (2) } FsY1731TestTlvPatternType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the Test pattern for Test TLV to be included in LBM or TST message. patternNullSignalWithoutCRC32(0) Pattern contains null signal without any CRC. patternNullSignalWithCRC32(1) Pattern contains null signal with CRC. patternPRBSWithoutCRC32(2) Pattern contains pseudo random bit sequence 2^-31-1 without any CRC. patternPRBSWithCRC32(3) Pattern contains pseudo random bit sequence 2^-31-1 with CRC. " SYNTAX INTEGER { patternNullSignalWithoutCRC32 (0), patternNullSignalWithCRC32 (1), patternPRBSWithoutCRC32 (2), patternPRBSWithCRC32 (3) } FsY1731DestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the type of transaction, unicast ,through MEPID or multicast. unicast(0) Indicates the operation is to be unicast. mepid(1) Indicates that MEPID of the target MEP is used for operation. multicast(2) Indicate the operation is Multicast . mipid(3) Indicates that MIP info of the target is used for operation only in MPLS-TP networks (Currently not applicable for Ethernet). " SYNTAX INTEGER { unicast (0), mepid (1), multicast (2), mipid (3) } FsY1731TransmitStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies an enumerated value indicates whether particular transmission can be initiated. ready(0) Indicates transmission can be initiated. notReady(1) Indicates transmission can not be initiated. start(2) To initiate the transmission . stop(3) To stop the transmission . " SYNTAX INTEGER { ready (0), notReady (1), start (2), stop (3) } FsY1731TransmitLbmTlvTypeOrNone ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies an enumerated value indicates which TLV is to be included in the LBM. none(0) Indicates No TLV is included in the LBM. dataTlv (1) Indicates Data TLV is included in the LBM. testTlv (2) Indicates Test TLV is included in the LBM. " SYNTAX INTEGER { none (0), dataTlv (1), testTlv (2) } FsY1731LbrErrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies an enumerated value indicates the received loopback reply error type. none (0) Indicates that no error was encountered in the received LBR. BadMacServiceDataUnit (1) Indicates bad/corrupt mac service data unit Crc32CheckFailure (2) Indicates CRC32 checksum failure " SYNTAX INTEGER { none (0), badMacServiceDataUnit (1), crc32CheckFailure (2) } FsY1731LmmInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the interval at which LMMs are sent by a MEP. The possible values are: interval100ms(1) LMMs are sent every 100 milliseconds. interval1s(2) LMMs are sent every second. interval10s(3) LMMs are sent every 10 seconds. interval1min(4) LMMs are sent every minute. interval10min(5) LMMs are sent every 10 minutes. " SYNTAX INTEGER { interval100ms (1), interval1s (2), interval10s (3), interval1min (4), interval10min (5) } FsY1731TimeIntervalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the units of interval at which LBM or TSTs are sent by a MEP. The possible values are: microseconds(1) units for LBMs or TSTs transmission interval are microseconds. milliseconds(2) units for LBMs or TSTs transmission interval are milliseconds. seconds(3) units for LBM or TST transmission interval are seconds. " SYNTAX INTEGER { microseconds (1), milliseconds (2), seconds (3) } FsY1731AisLckInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the interval at which AIS or LCK(s) are sent by a MEP. The possible values are: interval1s(1) AIS or LCK(s) are sent every second. interval1min(2) AIS or LCK(s) are sent every minute. Note: enumerations start at one to match the 'AIS/LCK Interval field' protocol field. " SYNTAX INTEGER { interval1s (1), interval1min (2) } FsY1731Traps ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the notifications to be provided to Management entity. Multiple notifications can be enabled at the same time. Notifications are: none(0) Dummy Bit bTrapTstReceivedWithError(1) The MEP has received a TST PDU with bad mac service data unit or invalid CRC32 checksum. bTrapFrameLoss(2) The calculated frame loss value is greater than the configured frame loss threshold value. bTrapFrameDelay(3) The calculated frame delay value is greater than the configured frame delay threshold value. bTrapDefRdiCondition(4) The MEP has encountered remote MEP defect condition. bTrapDefLossOfContinuity(5) The MEP has encountered loss of continuity defect condition. bTrapDefUnexpectedPeriod(6) The MEP has encountered unexpected period defect condition. bTrapDefUnexpectedMep(7) The MEP has encountered unexpected MEP defect condition. bTrapDefMisMerge(8) The MEP has encountered mismerge defect condition. bTrapDefUnexpectedMegLevel(9) The MEP has encountered unexpected MEG level defect condition. bTrapDefLocalLinkFailure(10) The MEP has encountered local link failure defect condition. bTrapDefInternalHWFailure(11) The MEP has encountered internal hardware failure defect condition. bTrapDefInternalSWFailure(12) The MEP has encountered internal software failure defect condition. bTrapDefAisCondition(13) The MEP has encountered alarm indication defect condition. bTrapDefLckCondition(14) The MEP has encountered locked defect condition. " SYNTAX BITS{ none (0), bTrapTstReceivedWithError (1), bTrapFrameLoss (2), bTrapFrameDelay (3), bTrapDefRdiCondition (4), bTrapDefLossOfContinuity (5), bTrapDefUnexpectedPeriod (6), bTrapDefUnexpectedMep (7), bTrapDefMisMerge (8), bTrapDefUnexpectedMegLevel (9), bTrapDefLocalLinkFailure (10), bTrapDefInternalHWFailure (11), bTrapDefInternalSWFailure (12), bTrapDefAisCondition (13), bTrapDefLckCondition (14) } FsY1731MepDefects ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies a MEP to detect and report a number of defects, and multiple defects can be present at the same time. These defects conditions are: none (0) Dummy Bit bDefRdiCondition (1) The MEP has encountered remote MEP defect condition. bDefLossOfContinuity (2) The MEP has encountered loss of continuity defect condition. bDefUnexpectedPeriod (3) The MEP has encountered unexpected period defect condition. bDefUnexpectedMep (4) The MEP has encountered unexpected MEP defect condition. bDefMisMerge (5) The MEP has encountered mismerge defect condition. bDefUnexpectedMegLevel (6) The MEP has encountered unexpected MEG level defect condition. bDefLocalLinkFailure (7) The MEP has encountered local link failure defect condition. bDefInternalHWFailure (8) The MEP has encountered internal hardware failure defect condition. bDefInternalSWFailure (9) The MEP has encountered internal software failure defect condition. bDefAisCondition(10) The MEP has encountered alarm indication defect condition. bDefLckCondition(11) The MEP has encountered locked defect condition. " SYNTAX BITS{ none (0), bDefRdiCondition (1), bDefLossOfContinuity (2), bDefUnexpectedPeriod (3), bDefUnexpectedMep (4), bDefMisMerge (5), bDefUnexpectedMegLevel (6), bDefLocalLinkFailure (7), bDefInternalHWFailure (8), bDefInternalSWFailure (9), bDefAisCondition (10), bDefLckCondition (11) } FsY1731ErrorLogType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies a MEP to detect and report a number of defects. logRdiConditionEntry(1) The MEP has encountered remote MEP defect condition entry. logLossOfContinuityEntry(2) The MEP has encountered loss of continuity defect condition entry. logUnexpectedPeriodEntry(3) The MEP has encountered unexpected period defect condition entry. logUnexpectedMepEntry(4) The MEP has encountered unexpected MEP defect condition entry. logMisMergeEntry(5) The MEP has encountered mismerge defect condition entry. logUnexpectedMegLevelEntry(6) The MEP has encountered unexpected MEG level defect condition entry. logLocalLinkFailureEntry(7) The MEP has encountered local link failure defect condition entry. logInternalHWFailureEntry(8) The MEP has encountered internal hardware failure defect condition entry. logInternalSWFailureEntry(9) The MEP has encountered internal software failure defect condition entry. logAisConditonEntry(10) The MEP has encountered alarm indication defect condition entry. logLckConditionEntry(11) The MEP has encountered locked defect condition entry. logRdiConditionExit(12) The MEP has encountered remote MEP defect condition exit. logLossOfContinuityExit(13) The MEP has encountered loss of continuity defect condition exit. logUnexpectedPeriodExit(14) The MEP has encountered unexpected period defect condition exit. logUnexpectedMepExit(15) The MEP has encountered unexpected MEP defect condition exit. logMisMergeExit(16) The MEP has encountered mismerge defect condition exit. logUnexpectedMegLevelExit(17) The MEP has encountered unexpected MEG level defect condition exit. logLocalLinkFailureExit(18) The MEP has encountered local link failure defect condition exit. logInternalHWFailureExit(19) The MEP has encountered internal hardware failure defect condition exit. logInternalSWFailureExit(20) The MEP has encountered internal software failure defect condition exit. logAisConditonExit(21) The MEP has encountered alarm indication defect condition exit. logLckConditionExit(22) The MEP has encountered locked defect condition exit." SYNTAX INTEGER{ logRdiConditionEntry(1), logLossOfContinuityEntry(2), logUnexpectedPeriodEntry(3), logUnexpectedMepEntry(4), logMisMergeEntry(5), logUnexpectedMegLevelEntry(6), logLocalLinkFailureEntry(7), logInternalHWFailureEntry(8), logInternalSWFailureEntry(9), logAisConditonEntry(10), logLckConditionEntry(11), logRdiConditionExit(12), logLossOfContinuityExit(13), logUnexpectedPeriodExit(14), logUnexpectedMepExit(15), logMisMergeExit(16), logUnexpectedMegLevelExit(17), logLocalLinkFailureExit(18), logInternalHWFailureExit(19), logInternalSWFailureExit(20), logAisConditonExit(21), logLckConditionExit(22) } FsY1731TimeRepresentation ::= TEXTUAL-CONVENTION DISPLAY-HINT "This object specifies the 4d:4d" STATUS current DESCRIPTION "This object specifies the time stamp. field octets contents range ----- ------ -------- ----- 1 1-4 seconds 0..4294967295 2 5-8 nanoseconds 0..0..4294967295 " SYNTAX OCTET STRING (SIZE (8)) FsY1731EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies a simple status value." SYNTAX INTEGER { enabled(1), disabled(2) } FsY1731AvailabilityInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the interval at which Availability Measurement is carried out by sendiong LMM. The possible values are: interval100ms(1) Availability Measurement is carried out at every 100 milliseconds. interval1s(2) Availability Measurement is carried out at every second. interval10s(3) Availability Measurement is carried out at every 10 seconds. interval1min(4) Availability Measurement is carried out at every minute. interval10min(5) Availability Measurement is carried out at every 10 minutes. interval10min(6) Availability Measurement is carried out at every 30 hour. interval10min(7) Availability Measurement is carried out at every 1 hour. " SYNTAX INTEGER { interval100ms (1), interval1s (2), interval10s (3), interval1min (4), interval10min (5), interval30min (6), interval1hour (7) } FsY1731AvailabilityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This object specifies the type of availability measurement to be carried out The valid values are: Static (1) Static Availability Measurement will be carried out. Sliding(2) Sliding Availability Measurement will be carried out. " SYNTAX INTEGER { defStatic (1), defSliding (2) } -- ******************************************************************* -- The Context level object. This group will contain all the -- MIB objects needed to access and modify per context objects. -- ******************************************************************* fsMIY1731ContextTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731ContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the List of per virtual context ECFM-Y1731 Module Parameters." ::= { fsMIY1731Context 1 } fsMIY1731ContextEntry OBJECT-TYPE SYNTAX FsMIY1731ContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Per virtual context ECFM-Y1731 module parmaters." INDEX { fsMIY1731ContextId } ::= { fsMIY1731ContextTable 1 } FsMIY1731ContextEntry ::= SEQUENCE { fsMIY1731ContextId Unsigned32, fsMIY1731ContextName DisplayString, fsMIY1731FrameLossBufferClear TruthValue, fsMIY1731FrameDelayBufferClear TruthValue, fsMIY1731LbrCacheClear TruthValue, fsMIY1731ErrorLogClear TruthValue, fsMIY1731FrameLossBufferSize Integer32, fsMIY1731FrameDelayBufferSize Integer32, fsMIY1731LbrCacheSize Integer32, fsMIY1731LbrCacheHoldTime Integer32, fsMIY1731TrapControl FsY1731Traps, fsMIY1731ErrorLogStatus FsY1731EnabledStatus, fsMIY1731ErrorLogSize Integer32, fsMIY1731OperStatus FsY1731EnabledStatus, fsMIY1731LbrCacheStatus INTEGER } fsMIY1731ContextId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the virtual context in the system. " ::= { fsMIY1731ContextEntry 1 } fsMIY1731ContextName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Name of the virtual context. " ::= { fsMIY1731ContextEntry 2 } fsMIY1731FrameLossBufferClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Trigger to remove the contents of Buffer maintained for storing frame-loss measured at various times. Note: Get operation value should be ignored. " ::= { fsMIY1731ContextEntry 3 } fsMIY1731FrameDelayBufferClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Trigger to remove the contents of Buffer maintained for storing frame-delay measured at various times. Note: Get operation value should be ignored. " ::= { fsMIY1731ContextEntry 4 } fsMIY1731LbrCacheClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Trigger to remove the contents of loopback cache maintained for storing loop back replies. Note: Get operation value should be ignored. " ::= { fsMIY1731ContextEntry 5 } fsMIY1731ErrorLogClear OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Trigger to remove the contents of continuity check error log maintained to store continuity check errors detected by MEP. Note: Get operation value should be ignored. " ::= { fsMIY1731ContextEntry 6 } fsMIY1731FrameLossBufferSize OBJECT-TYPE SYNTAX Integer32(1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Maximum size (in entries) of the Frame Loss Buffer. " DEFVAL { 1024 } ::= { fsMIY1731ContextEntry 7 } fsMIY1731FrameDelayBufferSize OBJECT-TYPE SYNTAX Integer32(1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Maximum number of entries for the Frame Delay Buffer " DEFVAL { 1024 } ::= { fsMIY1731ContextEntry 8 } fsMIY1731LbrCacheSize OBJECT-TYPE SYNTAX Integer32(1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Maximum number of entries for the loopback replies (LBR) Cache " DEFVAL { 1024 } ::= { fsMIY1731ContextEntry 9 } fsMIY1731LbrCacheHoldTime OBJECT-TYPE SYNTAX Integer32(1..2880) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time (in minutes) for which loopback replies (LBR) cache table entries are retained. " DEFVAL { 1440 } ::= { fsMIY1731ContextEntry 10 } fsMIY1731TrapControl OBJECT-TYPE SYNTAX FsY1731Traps MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a vector of Boolean notification types, used to enable or disable the Y1731 notification types: bTrapBadPduReceived bTrapFrameLoss bTrapFrameDelay bTrapDefRdiCondition bTrapDefLossOfContinuity bTrapDefUnexpectedPeriod bTrapDefUnexpectedMep bTrapDefMisMerge bTrapDefUnexpectedMegLevel bTrapDefLocalLinkFailure bTrapDefInternalHWFailure bTrapDefInternalSWFailure bTrapDefAisCondition bTrapDefLckCondition" ::= { fsMIY1731ContextEntry 11 } fsMIY1731ErrorLogStatus OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of Error Log. This enables or disables the logging of errors or defects detected by MEP. " DEFVAL { enabled } ::= { fsMIY1731ContextEntry 12 } fsMIY1731ErrorLogSize OBJECT-TYPE SYNTAX Integer32(1..4096) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Maximum number of entries for the Error Log, only if fsMIY1731ErrorLogStatus is enabled. " DEFVAL { 1024 } ::= { fsMIY1731ContextEntry 13 } fsMIY1731OperStatus OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative module status of Ethernet Y1731 functionality in CFM module. This enables or disables Y1731 in the system. A value of 'enabled' (1) indicates that Y1731 is enabled in the device. A value of 'disabled' (2) indicates that Y1731 is disabled in the device. Functionalities of ECFM would be according to Y1731 if Y1731 is enabled. Note: The ECFM Module must be enabled for Y1731 to enable or disable. " DEFVAL { disabled } ::= { fsMIY1731ContextEntry 14 } fsMIY1731LbrCacheStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of LBR cache. This enables or disables caching of LBRs " DEFVAL { enabled } ::= { fsMIY1731ContextEntry 15 } -- ****************************************************************** -- The Maintenance Entity Group Managed Object. This group contains all -- the MIB objects used to maintain Maintenance Entities. -- ****************************************************************** -- ****************************************************************** -- The Maintenance Entity Group (MEG) Table -- ****************************************************************** fsMIY1731MegTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731MegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Maintenance Entity Group table. Each row in the table represents a different Maintenance Entity Group. A Maintenance Entity Group is described in ITU-T Recommendation Y.1731 as the one which includes different MEs that satisfy the following conditions: - MEs in a MEG exist in the same administrative boundary; and - MEs in a MEG have the same MEG Level; and - MEs in a MEG belong to the same point-to-point ETH connection or multipoint ETH connectivity. " ::= { fsMIY1731Context 2 } fsMIY1731MegEntry OBJECT-TYPE SYNTAX FsMIY1731MegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Maintenance Entity Group table entry. This entry is not lost upon reboot. It is backed up by stable storage. " INDEX { fsMIY1731ContextId, fsMIY1731MegIndex } ::= { fsMIY1731MegTable 1 } FsMIY1731MegEntry ::= SEQUENCE { fsMIY1731MegIndex Unsigned32, fsMIY1731MegClientMEGLevel Dot1agCfmMDLevelOrNone, fsMIY1731MegVlanPriority Integer32, fsMIY1731MegDropEnable TruthValue, fsMIY1731MegRowStatus RowStatus } fsMIY1731MegIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the index to the Maintenance Entity Group table. " ::= { fsMIY1731MegEntry 1 } fsMIY1731MegClientMEGLevel OBJECT-TYPE SYNTAX Dot1agCfmMDLevelOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the MEG Level at which the most immediate client layer MEPs or MIPs exist. The value (-1) is reserved to indicate that no client MEG level has been configured. " DEFVAL { -1 } ::= { fsMIY1731MegEntry 2 } fsMIY1731MegVlanPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG until user explicitly configures particular frame's priority. " DEFVAL { 7 } ::= { fsMIY1731MegEntry 3 } fsMIY1731MegDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CFM frame. Applicable to all ECFM-Y1731 frames transmitted by the MEPs of the MEG until user explicitly configures particular frame's drop enable parameter. " DEFVAL { false } ::= { fsMIY1731MegEntry 4 } fsMIY1731MegRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the status of MEG row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status active and row status not active. " ::= { fsMIY1731MegEntry 5 } -- ****************************************************************** -- The Maintenance Entity Object. This group contains all the -- MIB objects used to maintain Maintenance Entities in the MIB. -- ****************************************************************** -- ****************************************************************** -- The Maintenance Entity (ME) Table -- ****************************************************************** fsMIY1731MeTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731MeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Maintenance Entity table. Each row in the table represents an ME. An ME represents a relationship between two MEPs, each configured with a single service instance. Configuring a Maintenance Entity Group End Point (MEP) at each of the DSAPs creates a Maintenance Entity (ME) to monitor that connectionless connectivity. The ITU-Carrier Code (ICC) and Unique MEGID Code (UMC) form the Maintenance Entity Group Identifier (MEGID) that is carried in CFM Messages to identify incorrect connectivity among Service Instances. A small integer, the Maintenance Entity Group End Point Identifier (MEPID), identifies each MEP among those configured on a single ME. This table uses two indices, first index is the index of the Maintenance Entity Group table. The writable objects in this table need to be persistent upon reboot or restart of a device. " ::= { fsMIY1731Context 3 } fsMIY1731MeEntry OBJECT-TYPE SYNTAX FsMIY1731MeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the ME table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex } ::= { fsMIY1731MeTable 1 } FsMIY1731MeEntry ::= SEQUENCE { fsMIY1731MeIndex Unsigned32, fsMIY1731MeCciEnabled TruthValue, fsMIY1731MeCcmApplication FsY1731CcmApplication, fsMIY1731MeMegIdIcc OCTET STRING, fsMIY1731MeMegIdUmc OCTET STRING, fsMIY1731MeRowStatus RowStatus } fsMIY1731MeIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Index of the ME table. " ::= { fsMIY1731MeEntry 1 } fsMIY1731MeCciEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the If set to true, all MEPs in the ME will generate CCM messages. " DEFVAL { false } ::= { fsMIY1731MeEntry 2 } fsMIY1731MeCcmApplication OBJECT-TYPE SYNTAX FsY1731CcmApplication MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an enumerated value indicating the ETH-CC Role. Note: Performance Monitoring is applicable only for point-to-point Maintenance Entity (ME). " DEFVAL { ccFaultManagement } ::= { fsMIY1731MeEntry 3 } fsMIY1731MeMegIdIcc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Unique code assigned to Network Operator or Service Provider maintained by ITU-T Telecommunication Standardization Bureau. The ITU Carrier Code used to form MEGID. This object contains non-null ICC value if it is configured by the user, otherwise null ICC value with octet size 0 should be assigned. " ::= { fsMIY1731MeEntry 4 } fsMIY1731MeMegIdUmc OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Unique code assigned by Network Operator or Service Provider and is appended to fsMIY1731MeMegIdIcc to form the MEGID The unique MEGID Code used to form MEGID. This object contains non-null UMC value if it is configured by the user, otherwise null UMC value with octet size 0 should be assigned. " ::= { fsMIY1731MeEntry 5 } fsMIY1731MeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the status of ME row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status active and row status not active. " ::= { fsMIY1731MeEntry 6 } -- ****************************************************************** -- The MEP Object. This object represents a Maintenance Entity Group -- End Point as described in ITU-T Y.1731 document. -- ****************************************************************** -- ****************************************************************** -- The MEP Table -- ****************************************************************** fsMIY1731MepTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731MepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Maintenance Entity Group End Point (MEP) table. Each row in the table represents a different MEP. A MEP is an actively managed CFM entity, associated with a specific DSAP of a Service Instance, which can generate and receive CFM PDUs and track any responses. It is an end point of a single Maintenance Entity. This table uses three indices. The first two indices are the indices of the Maintenance Entity Group (MEG) and Maintenance Entity (ME) tables, the reason being that a MEP is always related to an ME and MEG. The MEP table stores all the managed objects for sending LBM, LTM, AIS and LCK. This table also stores all the managed objects required for monitoring the performance. The objects which are used to initiate a transaction are to be set only when the row-status of the table is active. 'fsMIY1731MepTransmit' naming convention is used to isolate these objects from the others. " ::= { fsMIY1731Context 4 } fsMIY1731MepEntry OBJECT-TYPE SYNTAX FsMIY1731MepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the MEP table entry" INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier } ::= { fsMIY1731MepTable 1 } FsMIY1731MepEntry ::= SEQUENCE { fsMIY1731MepIdentifier Dot1agCfmMepId, fsMIY1731MepOutOfService TruthValue, fsMIY1731MepRdiCapability FsY1731EnabledStatus, fsMIY1731MepRdiPeriod Unsigned32, fsMIY1731MepCcmDropEnable TruthValue, fsMIY1731MepCcmPriority Integer32, fsMIY1731MepMulticastLbmRecvCapability FsY1731EnabledStatus, fsMIY1731MepLoopbackCapability FsY1731EnabledStatus, fsMIY1731MepLbmCurrentTransId Unsigned32, fsMIY1731MepTransmitLbmStatus FsY1731TransmitStatus, fsMIY1731MepTransmitLbmResultOK TruthValue, fsMIY1731MepTransmitLbmDestMacAddress MacAddress, fsMIY1731MepTransmitLbmDestMepId Dot1agCfmMepIdOrZero, fsMIY1731MepTransmitLbmDestType FsY1731DestType, fsMIY1731MepTransmitLbmMessages Integer32, fsMIY1731MepTransmitLbmInterval Unsigned32, fsMIY1731MepTransmitLbmIntervalType FsY1731TimeIntervalType, fsMIY1731MepTransmitLbmDeadline Unsigned32, fsMIY1731MepTransmitLbmDropEnable TruthValue, fsMIY1731MepTransmitLbmPriority Integer32, fsMIY1731MepTransmitLbmVariableBytes TruthValue, fsMIY1731MepTransmitLbmTlvType FsY1731TransmitLbmTlvTypeOrNone, fsMIY1731MepTransmitLbmDataPattern OCTET STRING, fsMIY1731MepTransmitLbmDataPatternSize Unsigned32, fsMIY1731MepTransmitLbmTestPatternType FsY1731TestTlvPatternType, fsMIY1731MepTransmitLbmTestPatternSize Unsigned32, fsMIY1731MepTransmitLbmSeqNumber Unsigned32, fsMIY1731MepBitErroredLbrIn Unsigned32, fsMIY1731MepTransmitLtmStatus Integer32, fsMIY1731MepTransmitLtmResultOK TruthValue, fsMIY1731MepTransmitLtmFlags BITS, fsMIY1731MepTransmitLtmTargetMacAddress MacAddress, fsMIY1731MepTransmitLtmTargetMepId Dot1agCfmMepIdOrZero, fsMIY1731MepTransmitLtmTargetIsMepId TruthValue, fsMIY1731MepTransmitLtmTtl Unsigned32, fsMIY1731MepTransmitLtmDropEnable TruthValue, fsMIY1731MepTransmitLtmPriority Integer32, fsMIY1731MepTransmitLtmSeqNumber Unsigned32, fsMIY1731MepTransmitLtmTimeout TimeInterval, fsMIY1731MepMulticastTstRecvCapability FsY1731EnabledStatus, fsMIY1731MepTransmitTstPatternType FsY1731TestTlvPatternType, fsMIY1731MepTransmitTstVariableBytes TruthValue, fsMIY1731MepTransmitTstPatternSize Unsigned32, fsMIY1731MepTransmitTstDestType FsY1731DestType, fsMIY1731MepTransmitTstDestMacAddress MacAddress, fsMIY1731MepTransmitTstDestMepId Dot1agCfmMepIdOrZero, fsMIY1731MepTransmitTstSeqNumber Unsigned32, fsMIY1731MepTransmitTstPriority Integer32, fsMIY1731MepTransmitTstDropEnable TruthValue, fsMIY1731MepTransmitTstMessages Integer32, fsMIY1731MepTransmitTstStatus FsY1731TransmitStatus, fsMIY1731MepTransmitTstResultOK TruthValue, fsMIY1731MepTransmitTstInterval Unsigned32, fsMIY1731MepTransmitTstIntervalType FsY1731TimeIntervalType, fsMIY1731MepTransmitTstDeadline Unsigned32, fsMIY1731MepBitErroredTstIn Unsigned32, fsMIY1731MepValidTstIn Unsigned32, fsMIY1731MepTstOut Unsigned32, fsMIY1731MepTransmitLmmStatus FsY1731TransmitStatus, fsMIY1731MepTransmitLmmResultOK TruthValue, fsMIY1731MepTransmitLmmInterval FsY1731LmmInterval, fsMIY1731MepTransmitLmmDeadline Unsigned32, fsMIY1731MepTransmitLmmDropEnable TruthValue, fsMIY1731MepTransmitLmmPriority Integer32, fsMIY1731MepTransmitLmmDestMacAddress MacAddress, fsMIY1731MepTransmitLmmDestMepId Dot1agCfmMepIdOrZero, fsMIY1731MepTransmitLmmDestIsMepId TruthValue, fsMIY1731MepTransmitLmmMessages Integer32, fsMIY1731MepTxFCf Unsigned32, fsMIY1731MepRxFCb Unsigned32, fsMIY1731MepTxFCb Unsigned32, fsMIY1731MepNearEndFrameLossThreshold Unsigned32, fsMIY1731MepFarEndFrameLossThreshold Unsigned32, fsMIY1731MepTransmitDmStatus FsY1731TransmitStatus, fsMIY1731MepTransmitDmResultOK TruthValue, fsMIY1731MepTransmitDmType INTEGER, fsMIY1731MepTransmitDmInterval TimeInterval, fsMIY1731MepTransmitDmMessages Integer32, fsMIY1731MepTransmitDmmDropEnable TruthValue, fsMIY1731MepTransmit1DmDropEnable TruthValue, fsMIY1731MepTransmitDmmPriority Integer32, fsMIY1731MepTransmit1DmPriority Integer32, fsMIY1731MepTransmitDmDestMacAddress MacAddress, fsMIY1731MepTransmitDmDestMepId Dot1agCfmMepIdOrZero, fsMIY1731MepTransmitDmDestIsMepId TruthValue, fsMIY1731MepTransmitDmDeadline Unsigned32, fsMIY1731MepDmrOptionalFields TruthValue, fsMIY1731Mep1DmRecvCapability INTEGER, fsMIY1731MepFrameDelayThreshold Unsigned32, fsMIY1731MepAisCapability FsY1731EnabledStatus, fsMIY1731MepAisCondition TruthValue, fsMIY1731MepAisInterval FsY1731AisLckInterval, fsMIY1731MepAisPeriod Unsigned32, fsMIY1731MepAisPriority Integer32, fsMIY1731MepAisDropEnable TruthValue, fsMIY1731MepAisDestIsMulticast TruthValue, fsMIY1731MepAisClientMacAddress MacAddress, fsMIY1731MepLckDestIsMulticast TruthValue, fsMIY1731MepLckClientMacAddress MacAddress, fsMIY1731MepLckCondition TruthValue, fsMIY1731MepLckInterval FsY1731AisLckInterval, fsMIY1731MepLckPeriod Unsigned32, fsMIY1731MepLckPriority Unsigned32, fsMIY1731MepLckDropEnable TruthValue, fsMIY1731MepLckDelay TimeInterval, fsMIY1731MepDefectConditions FsY1731MepDefects, fsMIY1731MepUnicastCcmMacAddress MacAddress, fsMIY1731MepRowStatus RowStatus, fsMIY1731MepRxFCf Unsigned32, fsMIY1731Mep1DmTransInterval TimeInterval, fsMIY1731MepTransmitThDestMacAddress MacAddress, fsMIY1731MepTransmitThDestMepId Dot1agCfmMepIdOrZero, fsMIY1731MepTransmitThDestIsMepId TruthValue, fsMIY1731MepTransmitThMessages Integer32, fsMIY1731MepTransmitThPps Unsigned32, fsMIY1731MepTransmitThDeadline Unsigned32, fsMIY1731MepTransmitThType INTEGER, fsMIY1731MepTransmitThStatus FsY1731TransmitStatus, fsMIY1731MepTransmitThFrameSize Unsigned32, fsMIY1731MepTransmitThBurstMessages Integer32, fsMIY1731MepTransmitThBurstDeadline Unsigned32, fsMIY1731MepTransmitThBurstType INTEGER, fsMIY1731MepTransmitThTestPatternType FsY1731TestTlvPatternType, fsMIY1731MepThVerifiedBps Unsigned32, fsMIY1731MepThUnVerifiedBps Unsigned32, fsMIY1731MepTransmitLbmMode INTEGER, fsMIY1731MepLbmOut Unsigned32, fsMIY1731MepTransmitLbmTimeout TimeInterval, fsMIY1731MepTstCapability FsY1731EnabledStatus, fsMIY1731MepTransmitThResultOK TruthValue, fsMIY1731MepThVerifiedFrameSize Unsigned32, fsMIY1731MepAisOffload INTEGER, fsMIY1731MepLbmTTL Unsigned32, fsMIY1731MepLbmIcc DisplayString, fsMIY1731MepLbmNodeId Unsigned32, fsMIY1731MepLbmIfNum Unsigned32, fsMIY1731MepLoopbackStatus TruthValue } fsMIY1731MepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Integer that is unique among all the MEPs in the same ME. Other definition is: a small integer, unique over a given Maintenance Entity, identifying a specific Maintenance Entity Group End Point. MEP Identifier is also known as the MEPID. " ::= { fsMIY1731MepEntry 1 } fsMIY1731MepOutOfService OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a Boolean indicating the administrative service that is being or to be performed. true indicates operation needs to be performed Out-of-service and false indicates operation needs to be performed In-service. " DEFVAL { false } ::= { fsMIY1731MepEntry 2 } fsMIY1731MepRdiCapability OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of RDI Transmission capability. This enables or disables the transmission of RDI bit in the CCM PDU by the MEP. If fsMIY1731MepRdiPeriod is provided then it will be enabled for that period only. " DEFVAL { enabled } ::= { fsMIY1731MepEntry 3 } fsMIY1731MepRdiPeriod OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time (in seconds) for which RDI Capability (fsMIY1731MepRdiCapability) is enabled. " ::= { fsMIY1731MepEntry 4 } fsMIY1731MepCcmDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted CCM frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 5 } fsMIY1731MepCcmPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure CCM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be used in the VLAN tag, if present in the transmitted CCM frame. The default value is 7. For MPLS-TP (LSP/PW): This indicates the 3-bit EXP value that needs to be used in the MPLS header of CCM frame. The default EXP value is 7. The range is (0..7). Note: Diff-serv based EXP field mapping is not supported. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 6 } fsMIY1731MepMulticastLbmRecvCapability OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of Multicast LBM frame reception. This enables or disables the capability of MEP to process the multicast LBM. A value of 'enabled' (1) indicates to accept and process multicast LBM. A value of 'disabled' (2) indicates not to process the multicast LBM. " DEFVAL { disabled } ::= { fsMIY1731MepEntry 7 } fsMIY1731MepLoopbackCapability OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of Loopback (ping) capability. This enables or disables capability of MEP to initiate and process Loopback (ping) operation. A value of 'enabled' (1) indicates to initiate as well as process LBM. A value of 'disabled' (2) indicates not to initiate as well as process the LBM. " DEFVAL { enabled } ::= { fsMIY1731MepEntry 8 } fsMIY1731MepLbmCurrentTransId OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the current LBM Transaction. " ::= { fsMIY1731MepEntry 9 } fsMIY1731MepTransmitLbmStatus OBJECT-TYPE SYNTAX FsY1731TransmitStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to 'start' to initiate LBM transmission and 'stop' to stop LBM transmission. 'ready' and 'notReady' indicates whether LBM can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepEntry 10 } fsMIY1731MepTransmitLbmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the result of LBM transaction, - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not be sent. " DEFVAL { true } ::= { fsMIY1731MepEntry 11 } fsMIY1731MepTransmitLbmDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitLbmDestType is 'Unicast' " ::= { fsMIY1731MepEntry 12 } fsMIY1731MepTransmitLbmDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Maintenance association End Point Identifier of another MEP in the same Maintenance Entity to which the LBM is to be sent. This address will be used if the value of the column fsMIY1731MepTransmitLbmDestType is for 'MepID'. " ::= { fsMIY1731MepEntry 13 } fsMIY1731MepTransmitLbmDestType OBJECT-TYPE SYNTAX FsY1731DestType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Lbm Destination Type i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network). " ::= { fsMIY1731MepEntry 14 } fsMIY1731MepTransmitLbmMessages OBJECT-TYPE SYNTAX Integer32 (0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of Loopback messages to be transmitted." ::= { fsMIY1731MepEntry 15 } fsMIY1731MepTransmitLbmInterval OBJECT-TYPE SYNTAX Unsigned32 (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interval between two successive LBM transmissions to be used by the MEP. fsMIY1731MepTransmitLbmIntervalType are used as units for this object. Ranges applicable for allowed units are: 10-1000 for microseconds 1-1000 for millseconds 1-600 for seconds " DEFVAL { 1 } ::= { fsMIY1731MepEntry 16 } fsMIY1731MepTransmitLbmIntervalType OBJECT-TYPE SYNTAX FsY1731TimeIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Units of fsMIY1731MepTransmitLbmInterval to be used by the MEP for LBM transmission. " DEFVAL { seconds } ::= { fsMIY1731MepEntry 17 } fsMIY1731MepTransmitLbmDeadline OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object Specifies a timeout, in seconds, before loopback (ping) exits. Loopback (ping) exits, if configured number of messages fsMIY1731MepTransmitLbmMessages are sent before timeout. " ::= { fsMIY1731MepEntry 18 } fsMIY1731MepTransmitLbmDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LBM frame. " DEFVAL { true } ::= { fsMIY1731MepEntry 19 } fsMIY1731MepTransmitLbmPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to configure LBM Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be used in the VLAN tag, if present in the transmitted LBM frame. The default value is 7. For MPLS-TP (LSP/PW): This indicates the 3-bit EXP value that needs to be used in the MPLS header of LBM frame. The default EXP value is 7. The range is (0..7). Note: Diff-serv based EXP field mapping is not supported. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 20 } fsMIY1731MepTransmitLbmVariableBytes OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a varying number of data bytes is to be transmitted in the LBM. 'true' indicates that LBMs to be transmitted are with varying bytes of data and 'false' indicates that LBM(s)to be transmitted is of the same size. " DEFVAL { false } ::= { fsMIY1731MepEntry 21 } fsMIY1731MepTransmitLbmTlvType OBJECT-TYPE SYNTAX FsY1731TransmitLbmTlvTypeOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of the TLV to be included in the LBM frame, if required to be send. " DEFVAL { none } ::= { fsMIY1731MepEntry 22 } fsMIY1731MepTransmitLbmDataPattern OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..8970)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent, determined by the fsMIY1731MepTransmitLbmTlvType. Size of data value sent in LBM is determined by the fsMIY1731MepTransmitLbmDataPatternSize. Default value of Data Pattern is all 1 Sequence. " ::= { fsMIY1731MepEntry 23 } fsMIY1731MepTransmitLbmDataPatternSize OBJECT-TYPE SYNTAX Unsigned32(0..8970) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the size (bytes) of the pattern(fsMIY1731MepTransmitLbmDataPatterm) to be included in the Data TLV, if the Data TLV is to be included in the LBM. fsMIY1731MepTransmitLbmDataPattern should be of zero length if this object is zero. Maximum frame size supported by ECFM is 9K, following is the calculation for the maximum size of data-tlv supported by ECFM : 18 bytes - Ethernet Header 4 bytes - CFM Header 4 bytes - Transaction-Id 1 byte - End Tlv 3 bytes - Data Tlv Over Head 9000 - 30 = 8970 bytes " DEFVAL { 34 } ::= { fsMIY1731MepEntry 24 } fsMIY1731MepTransmitLbmTestPatternType OBJECT-TYPE SYNTAX FsY1731TestTlvPatternType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of pattern to be included in the test TLV of the LBM, if the Test TLV is selected to be sent. " DEFVAL { patternPRBSWithoutCRC32 } ::= { fsMIY1731MepEntry 25 } fsMIY1731MepTransmitLbmTestPatternSize OBJECT-TYPE SYNTAX Unsigned32(0..8969) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the size of the pattern to be included in the Test TLV, if the Test TLV is selected to be sent. Maximum frame size supported by ECFM is 9K, following is the calculation for the maximum size of test-tlv supported by ECFM : 18 bytes - Ethernet Header 4 bytes - CFM Header 4 bytes - Transaction-Id 1 byte - End Tlv 4 bytes - Test Tlv Over Head 9000 - 31 = 8969 bytes " DEFVAL { 33 } ::= { fsMIY1731MepEntry 26 } fsMIY1731MepTransmitLbmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the sequence number to be transmitted in the next LBM. " ::= { fsMIY1731MepEntry 27 } fsMIY1731MepBitErroredLbrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of bit-errored LBRs received. LBR with different pattern as of Test TLV in the sent LBM is considered as bit-errored LBR " ::= { fsMIY1731MepEntry 28 } fsMIY1731MepTransmitLtmStatus OBJECT-TYPE SYNTAX INTEGER { ready (0), notReady (1), transmit (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a Enumerated value set to 'transmit' to initiate LTM transmission. 'ready' and 'notReady' indicates whether LTM can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepEntry 29 } fsMIY1731MepTransmitLtmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent " DEFVAL { true } ::= { fsMIY1731MepEntry 30 } fsMIY1731MepTransmitLtmFlags OBJECT-TYPE SYNTAX BITS { useHWonly (0) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the flags field for LTMs transmitted by the MEP. Indicates that only MAC address learned in bridge's forwarding tables is to be used to forward the LTM to the next hop." DEFVAL {{ useHWonly }} ::= { fsMIY1731MepEntry 31 } fsMIY1731MepTransmitLtmTargetMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitLtmTargetIsMepId is 'false'. " ::= { fsMIY1731MepEntry 32 } fsMIY1731MepTransmitLtmTargetMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column fsMIY1731MepTransmitLtmTargetIsMepId is 'true'. " ::= { fsMIY1731MepEntry 33 } fsMIY1731MepTransmitLtmTargetIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission. " ::= { fsMIY1731MepEntry 34 } fsMIY1731MepTransmitLtmTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each entity that handles the LTM. The value received in the LTM is returned in the LTR. If 0 on input, the LTM is not transmitted to the next hop. " DEFVAL {64} ::= { fsMIY1731MepEntry 35 } fsMIY1731MepTransmitLtmDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LTM frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 36 } fsMIY1731MepTransmitLtmPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LTM frame. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 37 } fsMIY1731MepTransmitLtmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the sequence number to be transmitted in next LBM. " ::= { fsMIY1731MepEntry 38 } fsMIY1731MepTransmitLtmTimeout OBJECT-TYPE SYNTAX TimeInterval(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time for all the replies (LTR) of a LTM to be received by the MEP.No reply (LTR) would be entertained thereafter (timeout). " DEFVAL { 500 } ::= { fsMIY1731MepEntry 39 } fsMIY1731MepMulticastTstRecvCapability OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of multicast TST frame reception. This enables or disables the capability of MEP to process the multicast TST. A value of 'enabled' (1) indicates to accept and process multicast TST. A value of 'disabled' (2) indicates not to process the multicast TST. " DEFVAL { disabled } ::= { fsMIY1731MepEntry 40 } fsMIY1731MepTransmitTstPatternType OBJECT-TYPE SYNTAX FsY1731TestTlvPatternType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of the pattern to be included in the test TLV of TST frame. " DEFVAL { patternPRBSWithoutCRC32 } ::= { fsMIY1731MepEntry 41 } fsMIY1731MepTransmitTstVariableBytes OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a varying number of data bytes to send in the TST. True indicates that TSTs are to be send with varying bytes of data and False indicates that TST(s) are send with same number of bytes of data. " DEFVAL { false } ::= { fsMIY1731MepEntry 42 } fsMIY1731MepTransmitTstPatternSize OBJECT-TYPE SYNTAX Unsigned32(0..8969) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the size of the pattern to be included in the Test TLV of the TST message. Maximum frame size supported by ECFM is 9K, following is the calculation for the maximum size of test-tlv supported by ECFM : 18 bytes - Ethernet Header 4 bytes - CFM Header 4 bytes - Transaction-Id 1 byte - End Tlv 4 bytes - Data Tlv Over Head 9000 - 31 = 8969 bytes " DEFVAL { 33 } ::= { fsMIY1731MepEntry 43 } fsMIY1731MepTransmitTstDestType OBJECT-TYPE SYNTAX FsY1731DestType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the TST Destination Types (unicast,MEPID,Multicast) " ::= { fsMIY1731MepEntry 44 } fsMIY1731MepTransmitTstDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIY1731MepTransmitTstDestType is 'Unicast' " ::= { fsMIY1731MepEntry 45 } fsMIY1731MepTransmitTstDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Maintenance Entity Group End Point Identifier of another MEP in the same Maintenance Association to which the TST is to be sent. This address will be used if the value of the column fsMIY1731MepTransmitTstDestType is for 'MepID'. " ::= { fsMIY1731MepEntry 46 } fsMIY1731MepTransmitTstSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Sequence number to be sent in the TST message. " ::= { fsMIY1731MepEntry 47 } fsMIY1731MepTransmitTstPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted TST frame. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 48 } fsMIY1731MepTransmitTstDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted TST frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 49 } fsMIY1731MepTransmitTstMessages OBJECT-TYPE SYNTAX Integer32(0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of Test messages to be transmitted. " ::= { fsMIY1731MepEntry 50 } fsMIY1731MepTransmitTstStatus OBJECT-TYPE SYNTAX FsY1731TransmitStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to 'start' to initiate TST transmission and 'stop' to stop TST transmission. 'ready' and 'notReady' indicates whether TST can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepEntry 51 } fsMIY1731MepTransmitTstResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the result of the operation: - true The Test Message(s) will be (or has been) sent. - false The Test Message(s) will not be sent. " DEFVAL { true } ::= { fsMIY1731MepEntry 52 } fsMIY1731MepTransmitTstInterval OBJECT-TYPE SYNTAX Unsigned32(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interval between two successive TST transmissions to be used by the MEP. fsMIY1731MepTransmitTstIntervalType is used as units for this object. Ranges applicable for allowed units are: 10-1000 for microseconds 1-1000 for millseconds 1-600 for seconds " DEFVAL { 1 } ::= { fsMIY1731MepEntry 53 } fsMIY1731MepTransmitTstIntervalType OBJECT-TYPE SYNTAX FsY1731TimeIntervalType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Units of fsMIY1731MepTransmitTstInterval to be used by the MEP for TSTs transmission. " DEFVAL { seconds } ::= { fsMIY1731MepEntry 54 } fsMIY1731MepTransmitTstDeadline OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Specify a timeout(in seconds), before test exits. Test exits, if configured number of messages are sent before timeout. " ::= { fsMIY1731MepEntry 55 } fsMIY1731MepBitErroredTstIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of bit-errored TST messages received. Reception of invalid TST message is considered as bit-errored TST messages. " ::= { fsMIY1731MepEntry 56 } fsMIY1731MepValidTstIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of valid TST messages received. " ::= { fsMIY1731MepEntry 57 } fsMIY1731MepTstOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of TST messages transmitted. " ::= { fsMIY1731MepEntry 58 } fsMIY1731MepTransmitLmmStatus OBJECT-TYPE SYNTAX FsY1731TransmitStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to 'start' to initiate LM transmission and 'stop' to stop LM transmission. 'ready' and 'notReady' indicates whether LM can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepEntry 59 } fsMIY1731MepTransmitLmmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the result of the operation: - true The Loss measurement Message (LMM) will be (or has been) sent. - false The Loss measurement Message (LMM) will not be sent. " DEFVAL { true } ::= { fsMIY1731MepEntry 60 } fsMIY1731MepTransmitLmmInterval OBJECT-TYPE SYNTAX FsY1731LmmInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interval between two successive LMM transmissions to be used by the MEP. " DEFVAL { interval100ms } ::= { fsMIY1731MepEntry 61 } fsMIY1731MepTransmitLmmDeadline OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a timeout, in seconds, before loss measurement exits. Loss Measurement exits, if configured number of messages are sent before timeout. " ::= { fsMIY1731MepEntry 62 } fsMIY1731MepTransmitLmmDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 63 } fsMIY1731MepTransmitLmmPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 64 } fsMIY1731MepTransmitLmmDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for LMM. " ::= { fsMIY1731MepEntry 65 } fsMIY1731MepTransmitLmmDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column fsMIY1731MepTransmitLmmDestIsMepId is 'true'. " ::= { fsMIY1731MepEntry 66 } fsMIY1731MepTransmitLmmDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the True indicates that MEPID of the target MEP is used for LM frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Frame Loss Measurement transmission. " ::= { fsMIY1731MepEntry 67 } fsMIY1731MepTransmitLmmMessages OBJECT-TYPE SYNTAX Integer32(0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of LMM messages to be transmitted. " ::= { fsMIY1731MepEntry 68 } fsMIY1731MepTxFCf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the counter of in-profile data frames transmitted towards its peer MEP transmitted in the last CCM or LMM. " ::= { fsMIY1731MepEntry 69 } fsMIY1731MepRxFCb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the counter of in-profile data frames received from its peer MEP at the time of receiving the last CCM frame. " ::= { fsMIY1731MepEntry 70 } fsMIY1731MepTxFCb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of fsMIY1731MepTxFCf field in the last CCM or LMR frame received from its peer MEP. " ::= { fsMIY1731MepEntry 71 } fsMIY1731MepNearEndFrameLossThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Threshold value for the near-end frame loss. Notification is sent to Management Application if calculated near-end frame loss exceeds configured threshold. " ::= { fsMIY1731MepEntry 72 } fsMIY1731MepFarEndFrameLossThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Threshold value for the far-end frame loss. Notification is sent to Management Application if calculated far-end frame loss exceeds configured threshold. " ::= { fsMIY1731MepEntry 73 } fsMIY1731MepTransmitDmStatus OBJECT-TYPE SYNTAX FsY1731TransmitStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to 'start' to initiate 1DM or DMM transmission and 'stop' to stop 1DM or DMM transmission. 'ready' and 'notReady' indicates whether 1DM or DMM can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepEntry 74 } fsMIY1731MepTransmitDmResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Indicates the result of the operation: - true The Delay measurement Message (1DM or DMM) will be (or has been) sent. - false The Delay measurement Message (1DM or DMM) will not be sent. " DEFVAL { true } ::= { fsMIY1731MepEntry 75 } fsMIY1731MepTransmitDmType OBJECT-TYPE SYNTAX INTEGER { oneWay(1), twoWay(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Type of delay measurement to be initiated: - oneWay(1) Measurement (by 1DM) is calculated at destination end. - twoWay(2) Measurement (by DMM-DMR) is calculated at initiation end. " DEFVAL { 2 } ::= { fsMIY1731MepEntry 76 } fsMIY1731MepTransmitDmInterval OBJECT-TYPE SYNTAX TimeInterval(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interval between two successive DM messages (1DM or DMM) transmissions to be used by the MEP. " DEFVAL { 100 } ::= { fsMIY1731MepEntry 77 } fsMIY1731MepTransmitDmMessages OBJECT-TYPE SYNTAX Integer32(0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of DM (1DM or DMM) messages to be transmitted. " ::= { fsMIY1731MepEntry 78 } fsMIY1731MepTransmitDmmDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted DMM frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 79 } fsMIY1731MepTransmit1DmDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 80 } fsMIY1731MepTransmitDmmPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted DMM frame. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 81 } fsMIY1731MepTransmit1DmPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted 1DM frame. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 82 } fsMIY1731MepTransmitDmDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for 1DM or DMM. " ::= { fsMIY1731MepEntry 83 } fsMIY1731MepTransmitDmDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column fsMIY1731MepTransmitDmDestIsMepId is 'true'. " ::= { fsMIY1731MepEntry 84 } fsMIY1731MepTransmitDmDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object when True indicates that MEPID of the target MEP is used for Delay frame transmission. False indicates that unicast destination MAC address of the target MEP is used for Delay frame transmission. " ::= { fsMIY1731MepEntry 85 } fsMIY1731MepTransmitDmDeadline OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a timeout, in seconds, before Delay Measurement operation exits. Delay Measurement operation exits, if configured number of messages are sent before timeout. " ::= { fsMIY1731MepEntry 86 } fsMIY1731MepDmrOptionalFields OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether to include optional fields in the DMR Frame or not. True indicates optional fields are to be included and False indicates optional fields are not included. Optional fields are included to include the processing time at peer MEP. " DEFVAL { false } ::= { fsMIY1731MepEntry 87 } fsMIY1731Mep1DmRecvCapability OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of 1DM Frame reception. This enables or disables the capability of MEP to process the 1DM Frames. A value of 'enabled' (1) indicates to accept and process 1DM Frames. A value of 'disabled' (2) indicates not to process the 1DM Frames. " DEFVAL { enabled } ::= { fsMIY1731MepEntry 88 } fsMIY1731MepFrameDelayThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Threshold (in microseconds) for the Frame delay. Notification is sent to Management application if calculated frame delay exceeds configured threshold. " DEFVAL { 200 } ::= { fsMIY1731MepEntry 89 } fsMIY1731MepAisCapability OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of AIS capability.This enables or disables transmission of AIS frames. A value of 'enabled' (1) indicates AIS frames will be transmitted when MEP is in AIS/LCK condition determined by fsMIY1731MepAisCondition and fsMIY1731MepLckCondition objects respectively or dot1agCfmMepDefects shows any defect. A value of 'disabled' (2) indicates AIS frames will not be transmitted. If fsMIY1731MepAisPeriod is provided then it will be enabled for that period only. fsMIY1731MepAisClientMacAddress in needs to be configured incase user needs to send AIS frame(s) as unicast or fsMIY1731MegClientMEGLevel in case of AIS frames needs to be sent as multicast in prior to enabling of fsMIY1731MepAisCapability. " DEFVAL { disabled } ::= { fsMIY1731MepEntry 90 } fsMIY1731MepAisCondition OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the MEP is in AIS condition. AIS condition occurs when it receives an AIS frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 91 } fsMIY1731MepAisInterval OBJECT-TYPE SYNTAX FsY1731AisLckInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interval between two successive AIS transmissions. " DEFVAL { interval1s } ::= { fsMIY1731MepEntry 92 } fsMIY1731MepAisPeriod OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time (in seconds) for which AIS Capability (fsMIY1731MepAisCapability) is enabled. " ::= { fsMIY1731MepEntry 93 } fsMIY1731MepAisPriority OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used for configuring AIS Priority for the Ethernet and the MPLS-TP (LSP/PW) based MEPs. For Ethernet: The Priority is a 3-bit priority value to be used in the VLAN tag, if present in the transmitted AIS frame. The default value is 7. For MPLS-TP (LSP/PW): This indicates the 3-bit EXP value that needs to be used in the MPLS header of AIS frame. The default EXP value is 7. The range is (0..7). Note: Diff-serv based EXP field mapping is not supported. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 94 } fsMIY1731MepAisDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted AIS frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 95 } fsMIY1731MepAisDestIsMulticast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to indicate the type of AIS transmission, unicast or multicast. 'true' indicates that AIS(s) are to be transmitted as multicast, 'false' indicates that AIS(s) are to be transmitted as unicast. " ::= { fsMIY1731MepEntry 96 } fsMIY1731MepAisClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a unicast destination MAC address of the Client MEP to which AIS frame is to send. This object is not supported on MEPs created over MPLS-TP networks, as these networks do not operate based on MAC Address. " ::= { fsMIY1731MepEntry 97 } fsMIY1731MepLckDestIsMulticast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to indicate the type of LCK transmission, unicast or multicast. 'true' indicates that LCK signals are to be transmitted as multicast, 'false' indicates that LCK signals are to be transmitted as unicast. " ::= { fsMIY1731MepEntry 98 } fsMIY1731MepLckClientMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a unicast destination MAC address of the Client MEP to which AIS frame is to send. " ::= { fsMIY1731MepEntry 99 } fsMIY1731MepLckCondition OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies if MEP is in LCK condition. LCK condition occurs when it receives a LCK frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 100 } fsMIY1731MepLckInterval OBJECT-TYPE SYNTAX FsY1731AisLckInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interval between two successive LCK transmissions to be used by the MEP. " DEFVAL { interval1s } ::= { fsMIY1731MepEntry 101 } fsMIY1731MepLckPeriod OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time period (in seconds) for which LCK messages are to be transmitted. " ::= { fsMIY1731MepEntry 102 } fsMIY1731MepLckPriority OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LCK frame. " DEFVAL { 7 } ::= { fsMIY1731MepEntry 103 } fsMIY1731MepLckDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LCK frame. " DEFVAL { false } ::= { fsMIY1731MepEntry 104 } fsMIY1731MepLckDelay OBJECT-TYPE SYNTAX TimeInterval(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies When a MEP is set as locked (for out-of-service operations), data traffic through that MEP will be blocked after this delay. " DEFVAL { 1 } ::= { fsMIY1731MepEntry 105 } fsMIY1731MepDefectConditions OBJECT-TYPE SYNTAX FsY1731MepDefects MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies a vector of Boolean indicates the defect conditions. " ::= { fsMIY1731MepEntry 106 } fsMIY1731MepUnicastCcmMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Unicast MacAddress used for performance monitoring through Continuity Check Messages. Continuity Check Messages are to be transmitted as multicast frames incase this object contains NULL value. This object is not supported on MEPs created over MPLS-TP networks, as these networks do not operate based on MAC Address. " ::= { fsMIY1731MepEntry 107 } fsMIY1731MepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the status of MEP row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status active and row status not active. " ::= { fsMIY1731MepEntry 108 } fsMIY1731MepRxFCf OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the value of fsMIY1731MepRxFCf field is the value of in-profile data frames received from its peer MEP. " ::= { fsMIY1731MepEntry 109 } fsMIY1731Mep1DmTransInterval OBJECT-TYPE SYNTAX TimeInterval(0..1500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time interval (in 0.01 seconds) between two successive One-way DM Transactions and is used to carry out Delay Variation Measurement for 1DM transactions. The value '0' indicates One-way Delay Variation measurement cannot take place. The value should be greater than the DM Interval. " DEFVAL { 0 } ::= { fsMIY1731MepEntry 110 } fsMIY1731MepTransmitThDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Throughput Measurement. " ::= { fsMIY1731MepEntry 111 } fsMIY1731MepTransmitThDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column fsMIY1731MepTransmitThDestIsMepId is 'true'. " ::= { fsMIY1731MepEntry 112 } fsMIY1731MepTransmitThDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object when True indicates that MEPID of the target MEP is used for Throughput Measurement. False indicates that unicast destination MAC address of the target MEP is used for Throughput Measurement. " ::= { fsMIY1731MepEntry 113 } fsMIY1731MepTransmitThMessages OBJECT-TYPE SYNTAX Integer32(0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of Throughput messages (LBM / TST) to be transmitted. " ::= { fsMIY1731MepEntry 114 } fsMIY1731MepTransmitThPps OBJECT-TYPE SYNTAX Unsigned32 (1..100000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of Throughput messages being transmitted in a second. It is used to calculate the time interval between two successive message transmission. It's default value is 100 packets per sec. " DEFVAL {100} ::= { fsMIY1731MepEntry 115 } fsMIY1731MepTransmitThDeadline OBJECT-TYPE SYNTAX Unsigned32(0..172800) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a timeout, in seconds, before Throughput Measurement operation exits. Throughput Measurement operation exits, if configured number of messages are sent before timeout. " ::= { fsMIY1731MepEntry 116 } fsMIY1731MepTransmitThType OBJECT-TYPE SYNTAX INTEGER { oneWay(1), twoWay(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Type of Throughput measurement to be initiated: - oneWay(1) Measurement (by TST) is calculated at initiation end with the use of VSM PDUs. - twoWay(2) Measurement (by LBM-LBR) is calculated at initiation end. " DEFVAL { 2 } ::= { fsMIY1731MepEntry 117 } fsMIY1731MepTransmitThStatus OBJECT-TYPE SYNTAX FsY1731TransmitStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to 'start' to initiate Throughput transaction and 'stop' to stop Throughput transaction. 'ready' and 'notReady' indicates whether Throughput transaction can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepEntry 118 } fsMIY1731MepTransmitThFrameSize OBJECT-TYPE SYNTAX Unsigned32 (64..1522) MAX-ACCESS read-write STATUS current DESCRIPTION "The object specifies the initial total packet size configured by the user including the Test TLV of the (LBM / TST) message. As the Frame Size value is varied to calculate the maximum Throughput this value represents the unverifed Frame Size with which last throughput value is calculated or to be calculated. " DEFVAL { 1500 } ::= { fsMIY1731MepEntry 119 } fsMIY1731MepTransmitThBurstMessages OBJECT-TYPE SYNTAX Integer32(0..8192) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the number of Throughput messages (LBM / TST) to be transmitted in a burst. " DEFVAL { 10 } ::= { fsMIY1731MepEntry 120 } fsMIY1731MepTransmitThBurstDeadline OBJECT-TYPE SYNTAX Unsigned32(0..172800000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the time period, in milliseconds, for which a burst exists (LB Burst / TST Burst ). " DEFVAL { 100 } ::= { fsMIY1731MepEntry 121 } fsMIY1731MepTransmitThBurstType OBJECT-TYPE SYNTAX INTEGER { burstMessages(1), burstDeadline(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Throughput Burst can be initiated as: - burstMessages(1) Number of Throughput messages (LBM / TST) to be transmitted in a burst. - burstDeadline(2) Timeout, in seconds, before single Throughput Burst (LB Burst / TST Burst ) exits. " DEFVAL { 2 } ::= { fsMIY1731MepEntry 122 } fsMIY1731MepTransmitThTestPatternType OBJECT-TYPE SYNTAX FsY1731TestTlvPatternType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the type of the pattern to be included in the test TLV of Throughput frame(LBM/TST PDU) . TestTlvPattern Types can be: patternNullSignalWithoutCRC32(0) Pattern contains null signal without any CRC. patternNullSignalWithCRC32(1) Pattern contains null signal with CRC. patternPRBSWithoutCRC32(2) Pattern contains pseudo random bit sequence 2^-31-1 without any CRC. patternPRBSWithCRC32(3) Pattern contains pseudo random bit sequence 2^-31-1 with CRC. " DEFVAL { patternNullSignalWithoutCRC32 } ::= { fsMIY1731MepEntry 123 } fsMIY1731MepThVerifiedBps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the verified throughput value. " ::= { fsMIY1731MepEntry 124 } fsMIY1731MepThUnVerifiedBps OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the throughput value under verification. This is the throughput value for which verification is still to be performed. " ::= { fsMIY1731MepEntry 125 } fsMIY1731MepTransmitLbmMode OBJECT-TYPE SYNTAX INTEGER { burst(1), requestResponse(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the LBMs which can be initiated as: - burst(1) Lbms are initiated without waiting for the reception of LBR PDUs. - requestResponse(2) After initiating the Lbm wait for the reception of Lbr or the timeout before sending the next Lbm. " DEFVAL { 2 } ::= { fsMIY1731MepEntry 126 } fsMIY1731MepLbmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LBM messages transmitted. " ::= { fsMIY1731MepEntry 127 } fsMIY1731MepTransmitLbmTimeout OBJECT-TYPE SYNTAX TimeInterval(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time for all the replies (LBR) of LBMs to be received by the MEP.No reply (LBR) would be entertained thereafter (timeout). " DEFVAL { 500 } ::= { fsMIY1731MepEntry 128 } fsMIY1731MepTstCapability OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative status of Tst capability. This enables or disables capability of MEP to initiate and process Tst operation. A value of 'enabled' (1) indicates to initiate as well as process TST. A value of 'disabled' (2) indicates not to initiate as well as process the TST. " DEFVAL { enabled } ::= { fsMIY1731MepEntry 129 } fsMIY1731MepTransmitThResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the result of Th transaction, - true The TH Message(s) will be (or has been) sent. - false The TH Message(s) will not be sent due to some internal problem. " DEFVAL { true } ::= { fsMIY1731MepEntry 130 } fsMIY1731MepThVerifiedFrameSize OBJECT-TYPE SYNTAX Unsigned32 (0..9000) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Frame Size with which verified Throughput is achieved " DEFVAL { 0 } ::= { fsMIY1731MepEntry 131 } fsMIY1731MepAisOffload OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the administrative MEP AIS Offloading status. When value 'enabled' (1) is set, the AIS Offloading is enabled for the MEP. When value 'disabled' (2) is set, the AIS Offloading will be disabled for the MEP. By Default AIS Offloading is disabled. " DEFVAL { disabled } ::= { fsMIY1731MepEntry 132 } fsMIY1731MepLbmTTL OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the time-to-live(TTL) value to be used in the MPLS outer label header when loopback connectivity verification (ping) or diagnostic tests has to be performed to a MEP/MIP in the MPLS-TP network. By default TTL value will be 255. If the user sets a particular value, then that TTL will be set and carried in LBM packets. When performing loopback connectivity verification (ping) or diagnostic tests to a MIP, this object MUST be set to an appropriate TTL value needed to reach the MIP. For MIP, this must be configured in conjunction with fsMIY1731MepTransmitLbmDestType as mipid(3), fsMIY1731MepLbmIcc, fsMIY1731MepLbmNodeId, fsMIY1731MepLbmIfNum. For MEP, this must be configured in conjunction with fsMIY1731MepTransmitLbmDestType as mepid(1) and fsMIY1731MepTransmitLbmDestMepId. " DEFVAL { 255 } ::= { fsMIY1731MepEntry 133 } fsMIY1731MepLbmIcc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the ICC(ITU Carrier Code) of the MIP node in ICC based MPLS-TP network for which loopback connectivity verification (ping) or diagnostic tests has to be initiated. The ICC code consists of 1-6 characters with alphabetic or numberic characters. This must be configured in conjunction with fsMIY1731MepTransmitLbmDestType as mipid(3), fsMIY1731MepLbmNodeId, fsMIY1731MepLbmIfNum. fsMIY1731MepLbmTTL. This object must be set ONLY to perform loopback connectivity verification or diagnostic tests to a MIP (and not for remote MEP) in the MPLS-TP network. " ::= { fsMIY1731MepEntry 134 } fsMIY1731MepLbmNodeId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Node Id of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests has to be initiated. This must be interpreted in conjunction with the fsMIY1731MepLbmIcc object. This must be configured in conjunction with fsMIY1731MepTransmitLbmDestType as mipid(3), fsMIY1731MepLbmIcc, fsMIY1731MepLbmIfNum. fsMIY1731MepLbmTTL. This object must be set ONLY to perform loopback connectivity verification or diagnostic tests to a MIP (and not for remote MEP) in the MPLS-TP network. " ::= { fsMIY1731MepEntry 135 } fsMIY1731MepLbmIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which loopback connectivity verification(ping) or diagnostic tests has to be initiated. Per Interface MIP is identified by configuring the non-zero If-Num of the Access Point towards the server layer. Per Node MIP is identified by configuring a value of zero to this object. This must be interpreted in conjunction with the fsMIY1731MepLbmIcc and fsMIY1731MepLbmNodeId objects. This must be configured in conjunction with fsMIY1731MepTransmitLbmDestType as mipid(3), fsMIY1731MepLbmIcc, fsMIY1731MepLbmNodeId. fsMIY1731MepLbmTTL. This object must be set ONLY to perform loopback connectivity verification or diagnostic tests to a MIP (and not for remote MEP) in the MPLS-TP network. " ::= { fsMIY1731MepEntry 136 } fsMIY1731MepLoopbackStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the loopback status of the MEP. This object used in Y1564/RFC2544 to put the remote end in loopback mode for looping back all the data packets. " DEFVAL { false } ::= { fsMIY1731MepEntry 137 } -- ---------------------------------------------------------------------------- -- The MEP Table - End -- ---------------------------------------------------------------------------- -- ****************************************************************** -- The Error Log Table -- ****************************************************************** fsMIY1731ErrorLogTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731ErrorLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Error Log table. Size of this table is defined by the object fsMIY1731ErrorLogSize. If the addition of an error entry would exceed the resources allocated to table, then the oldest entries in the table are deleted until sufficient resources are available to hold the new error entry. Each row in the table represents error or defect detected by a specific MEP. This table uses three indices. The first four are the indices of MEP table the reason being that a error or defect can only be detected by MEP. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " ::= { fsMIY1731Context 5 } fsMIY1731ErrorLogEntry OBJECT-TYPE SYNTAX FsMIY1731ErrorLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Error Log Table." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731ErrorLogSeqNumber } ::= { fsMIY1731ErrorLogTable 1 } FsMIY1731ErrorLogEntry ::= SEQUENCE { fsMIY1731ErrorLogSeqNumber Unsigned32, fsMIY1731ErrorLogTimeStamp TimeStamp, fsMIY1731ErrorLogType FsY1731ErrorLogType, fsMIY1731ErrorLogRMepIdentifier Dot1agCfmMepIdOrZero } fsMIY1731ErrorLogSeqNumber OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Locally maintained sequence number of Error Log Entries" ::= { fsMIY1731ErrorLogEntry 1 } fsMIY1731ErrorLogTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the time at which error or defect is detected by a MEP. " ::= { fsMIY1731ErrorLogEntry 2 } fsMIY1731ErrorLogType OBJECT-TYPE SYNTAX FsY1731ErrorLogType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type of error or defect detected by MEP. Type of errors/defects are: bDefRdiCondition, bDefLossOfContinuity, bDefUnexpectedPeriod, bDefUnexpectedMep, bDefMisMerge, bDefUnexpectedMegLevel, bDefLocalLinkFailure, bDefInternalHWFailure, bDefInternalSWFailure, bDefAisCondition, bDefLckCondition " ::= { fsMIY1731ErrorLogEntry 3 } fsMIY1731ErrorLogRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the specific remote MEP due to which defect is detected. Zero indicates that no remote MEP contributes for the occurence of defect. " ::= { fsMIY1731ErrorLogEntry 4 } -- ****************************************************************** -- The Linktrace Reply Table -- ****************************************************************** fsMIY1731LtrTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731LtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " ::= { fsMIY1731Context 6 } fsMIY1731LtrEntry OBJECT-TYPE SYNTAX FsMIY1731LtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Linktrace Reply table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731LtrSeqNumber, fsMIY1731LtrReceiveOrder } ::= { fsMIY1731LtrTable 1 } FsMIY1731LtrEntry ::= SEQUENCE { fsMIY1731LtrSeqNumber Unsigned32, fsMIY1731LtrReceiveOrder Unsigned32, fsMIY1731LtrReceiveTime TimeInterval } fsMIY1731LtrSeqNumber OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Transaction identifier/Sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. " ::= { fsMIY1731LtrEntry 1} fsMIY1731LtrReceiveOrder OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. fsMIY1731LtrReceiveOrder are assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs. " ::= { fsMIY1731LtrEntry 2 } fsMIY1731LtrReceiveTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the time taken to receive a LTR in response to a transmitted LTM. " ::= { fsMIY1731LtrEntry 3} -- ****************************************************************** -- The Loopback Message Table -- ****************************************************************** fsMIY1731LbmTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731LbmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains information of Loopback messages sent by a specific MEP. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " ::= { fsMIY1731Context 7 } fsMIY1731LbmEntry OBJECT-TYPE SYNTAX FsMIY1731LbmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Loopback Message table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731LbmTransId, fsMIY1731LbmSeqNumber } ::= { fsMIY1731LbmTable 1 } FsMIY1731LbmEntry ::= SEQUENCE { fsMIY1731LbmTransId Unsigned32, fsMIY1731LbmSeqNumber Unsigned32, fsMIY1731LbmBytesSent Unsigned32, fsMIY1731LbmTargetMacAddress MacAddress, fsMIY1731LbmUnexptedLbrIn Unsigned32, fsMIY1731LbmDuplicatedLbrIn Unsigned32, fsMIY1731LbmNumOfResponders Unsigned32, fsMIY1731LbmDestType FsY1731DestType, fsMIY1731LbmDestMepId Dot1agCfmMepIdOrZero, fsMIY1731LbmIcc DisplayString, fsMIY1731LbmNodeId Unsigned32, fsMIY1731LbmIfNum Unsigned32, fsMIY1731LbmTTL Unsigned32 } fsMIY1731LbmTransId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Transaction Identifier identifies a loopback or ping (LBM)transaction. " ::= { fsMIY1731LbmEntry 1} fsMIY1731LbmSeqNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Sequence number returned by a previous transmit loopback message, indicating which LBM's response is going to be returned. " ::= { fsMIY1731LbmEntry 2} fsMIY1731LbmBytesSent OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the size (in bytes) of the LBM transmitted. " ::= { fsMIY1731LbmEntry 3 } fsMIY1731LbmTargetMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Mac Address of the target MP (MEP or MIP) to which LBM has been sent. For multicast LBM this object should not be considered. " ::= { fsMIY1731LbmEntry 4} fsMIY1731LbmUnexptedLbrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of unexpected Lbrs Received. " ::= { fsMIY1731LbmEntry 5 } fsMIY1731LbmDuplicatedLbrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of Duplicated Lbrs Received. " ::= { fsMIY1731LbmEntry 6 } fsMIY1731LbmNumOfResponders OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of Responders which have sent the reply (LBR) for the initiated LBM. " ::= { fsMIY1731LbmEntry 7 } fsMIY1731LbmDestType OBJECT-TYPE SYNTAX FsY1731DestType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the type (i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination for which LBM was sent. " ::= { fsMIY1731LbmEntry 8 } fsMIY1731LbmDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Target MEP ID to which LBM was sent. " ::= { fsMIY1731LbmEntry 9 } fsMIY1731LbmIcc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the ICC of the MIP node in ICC based MPLS-TP network for which LBM was sent. " ::= { fsMIY1731LbmEntry 10 } fsMIY1731LbmNodeId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Node Id of the specific MIP node in MPLS-TP network for which LBM was sent. " ::= { fsMIY1731LbmEntry 11 } fsMIY1731LbmIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Interface Number of the specific MIP node in MPLS-TP network for which LBM was sent. " ::= { fsMIY1731LbmEntry 12 } fsMIY1731LbmTTL OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the time-to-live(TTL) value used in the MPLS outer label header in the LBM which was sent. " ::= { fsMIY1731LbmEntry 13 } -- ****************************************************************** -- The Loopback Reply Table -- ****************************************************************** fsMIY1731LbrTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731LbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains a list of Loopback replies received by a specific MEP in response to a loopback message. Size of this table is defined by the object fsMIY1731LbrCacheSize. If the addition of a loopback reply entry would exceed the resources allocated to table, then the oldest entries in the table are deleted until sufficient resources are available to hold the new loopback reply entry. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " ::= { fsMIY1731Context 8 } fsMIY1731LbrEntry OBJECT-TYPE SYNTAX FsMIY1731LbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Loopback Reply table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731LbmTransId, fsMIY1731LbrSeqNumber, fsMIY1731LbrReceiveOrder } ::= { fsMIY1731LbrTable 1 } FsMIY1731LbrEntry ::= SEQUENCE { fsMIY1731LbrSeqNumber Unsigned32, fsMIY1731LbrReceiveOrder Unsigned32, fsMIY1731LbrResponderMacAddress MacAddress, fsMIY1731LbrReceiveTime TimeInterval, fsMIY1731LbrErrorType FsY1731LbrErrType, fsMIY1731LbrDestType FsY1731DestType, fsMIY1731LbrDestMepId Dot1agCfmMepIdOrZero, fsMIY1731LbrICC DisplayString, fsMIY1731LbrNodeId Unsigned32, fsMIY1731LbrIfNum Unsigned32 } fsMIY1731LbrSeqNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Sequence number received in the Loopback reply. " ::= { fsMIY1731LbrEntry 1} fsMIY1731LbrReceiveOrder OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Order in which LBRs are received for a same Sequence Number field value. " ::= { fsMIY1731LbrEntry 2 } fsMIY1731LbrResponderMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Mac Address of the MP which has sent the response for the LBM. " ::= { fsMIY1731LbrEntry 3} fsMIY1731LbrReceiveTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time taken to receive a LBR in response to the transmitted LBM. " ::= { fsMIY1731LbrEntry 4} fsMIY1731LbrErrorType OBJECT-TYPE SYNTAX FsY1731LbrErrType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies that received loobback reply is errored one. bit 0 indicates bad MSDU (when data in the LBR does not match what was sent in the LBM) bit 1 indicates bit errored LBR (LBR is with bit errors) " ::= { fsMIY1731LbrEntry 5 } fsMIY1731LbrDestType OBJECT-TYPE SYNTAX FsY1731DestType MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Type ((i.e. Unicast, MepID, Multicast or MipId(MIP Id applicable only for MPLS-TP network)) of the destination from which LBR was received. " ::= { fsMIY1731LbrEntry 6 } fsMIY1731LbrDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the MEP which has sent the response for the LBM. " ::= { fsMIY1731LbrEntry 7 } fsMIY1731LbrICC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the ICC of the MIP node in ICC based MPLS-TP network from which LBR was received. " ::= { fsMIY1731LbrEntry 8 } fsMIY1731LbrNodeId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Node Id of the specific MIP node in MPLS-TP network from which LBR was received. " ::= { fsMIY1731LbrEntry 9 } fsMIY1731LbrIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Interface Number of the specific MIP node in MPLS-TP network from which LBR was received. " ::= { fsMIY1731LbrEntry 10 } -- ****************************************************************** -- The Loopback Statistics Table -- ****************************************************************** fsMIY1731LbStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731LbStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains output of loopback or ping transaction. Output includes number of replies recieved, time taken for a reply to come. SNMP SMI does not allow to state in a MIB that an object in a table is an array. The solution is to take the index (or indices) of the first table and add one or more indices. " ::= { fsMIY1731Context 9 } fsMIY1731LbStatsEntry OBJECT-TYPE SYNTAX FsMIY1731LbStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Loopback Statistics table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731LbmTransId } ::= { fsMIY1731LbStatsTable 1 } FsMIY1731LbStatsEntry ::= SEQUENCE { fsMIY1731LbStatsLbmOut Unsigned32, fsMIY1731LbStatsLbrIn Unsigned32, fsMIY1731LbStatsLbrTimeAverage TimeInterval, fsMIY1731LbStatsLbrTimeMin TimeInterval, fsMIY1731LbStatsLbrTimeMax TimeInterval, fsMIY1731LbStatsTotalResponders Unsigned32, fsMIY1731LbStatsAvgLbrsPerResponder Unsigned32 } fsMIY1731LbStatsLbmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of LBMs sent in a loopback or ping transaction. " ::= { fsMIY1731LbStatsEntry 1} fsMIY1731LbStatsLbrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of replies (LBR) received in a loopback or ping transaction. " ::= { fsMIY1731LbStatsEntry 2 } fsMIY1731LbStatsLbrTimeAverage OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Average time taken to receive the replies (LBR) for the current loopback or ping transaction. " ::= { fsMIY1731LbStatsEntry 3 } fsMIY1731LbStatsLbrTimeMin OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Minimum time taken to receive the replies (LBR) for the current loopback or ping transaction. " ::= { fsMIY1731LbStatsEntry 4 } fsMIY1731LbStatsLbrTimeMax OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Maximum time taken to receive the replies (LBR) for the current loopback or ping transaction. " ::= { fsMIY1731LbStatsEntry 5 } fsMIY1731LbStatsTotalResponders OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Total Number of Responders which have sent the reply (LBR) for the initiated LBM. " ::= { fsMIY1731LbStatsEntry 6 } fsMIY1731LbStatsAvgLbrsPerResponder OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Average Number of LBR(s) received per Responder. " ::= { fsMIY1731LbStatsEntry 7 } -- ****************************************************************** -- The Frame Delay Buffer Table -- ****************************************************************** fsMIY1731FdTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731FdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains a list of information about the Frame Delay measured at various times by a MEP. Size of this table is defined by the object fsMIY1731FrameDelayBufferSize. If the addition of a frame delay entry would exceed the resources allocated to table, then the oldest entries in the table are deleted until sufficient resources are available to hold the new frame delay entry. Delay Measured can be of one-way or two-way. " ::= { fsMIY1731Context 10 } fsMIY1731FdEntry OBJECT-TYPE SYNTAX FsMIY1731FdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Frame delay buffer table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731FdTransId, fsMIY1731FdSeqNumber } ::= { fsMIY1731FdTable 1 } FsMIY1731FdEntry ::= SEQUENCE { fsMIY1731FdTransId Unsigned32, fsMIY1731FdSeqNumber Unsigned32, fsMIY1731FdTxTimeStampf FsY1731TimeRepresentation, fsMIY1731FdMeasurementTimeStamp TimeStamp, fsMIY1731FdPeerMepMacAddress MacAddress, fsMIY1731FdIfIndex InterfaceIndex, fsMIY1731FdDelayValue FsY1731TimeRepresentation, fsMIY1731FdIFDV FsY1731TimeRepresentation, fsMIY1731FdFDV FsY1731TimeRepresentation, fsMIY1731FdMeasurementType INTEGER } fsMIY1731FdTransId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies a delay measurement transaction. " ::= { fsMIY1731FdEntry 1 } fsMIY1731FdSeqNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Locally maintained sequence number of FD Entries" ::= { fsMIY1731FdEntry 2} fsMIY1731FdTxTimeStampf OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the TxTimeStampf value sent in a Delay measurement message (DMM). or received in 1DM frame. " ::= { fsMIY1731FdEntry 3 } fsMIY1731FdMeasurementTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time at which measurement takes place. " ::= { fsMIY1731FdEntry 4} fsMIY1731FdPeerMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Mac Address of the peer MEP to which DM message(s) is sent. " ::= { fsMIY1731FdEntry 5 } fsMIY1731FdIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifie the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached. " ::= { fsMIY1731FdEntry 6 } fsMIY1731FdDelayValue OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the measured frame delay value. " ::= { fsMIY1731FdEntry 7 } fsMIY1731FdIFDV OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Inter frame delay variation, (IFDV), calculated with respect to current transaction. " ::= { fsMIY1731FdEntry 8 } fsMIY1731FdFDV OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Frame delay variation, (IFDV), calculated with respect to current transaction. " ::= { fsMIY1731FdEntry 9 } fsMIY1731FdMeasurementType OBJECT-TYPE SYNTAX INTEGER { oneWay(1), twoWay(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Type of the frame-delay measurement (oneWay or twoWay). " ::= { fsMIY1731FdEntry 10 } -- ****************************************************************** -- The Frame Delay Statistics Table -- ****************************************************************** fsMIY1731FdStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731FdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains output of one-way and two-way delay measurement transaction. " ::= { fsMIY1731Context 11 } fsMIY1731FdStatsEntry OBJECT-TYPE SYNTAX FsMIY1731FdStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Delay Statistics table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731FdTransId } ::= { fsMIY1731FdStatsTable 1 } FsMIY1731FdStatsEntry ::= SEQUENCE { fsMIY1731FdStatsTimeStamp TimeStamp, fsMIY1731FdStatsDmmOut Unsigned32, fsMIY1731FdStatsDmrIn Unsigned32, fsMIY1731FdStatsDelayAverage FsY1731TimeRepresentation, fsMIY1731FdStatsFDVAverage FsY1731TimeRepresentation, fsMIY1731FdStatsIFDVAverage FsY1731TimeRepresentation, fsMIY1731FdStatsDelayMin FsY1731TimeRepresentation, fsMIY1731FdStatsDelayMax FsY1731TimeRepresentation } fsMIY1731FdStatsTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time stamp at which one-way or two-way delay measurement (DMM) is initiated. " ::= { fsMIY1731FdStatsEntry 1 } fsMIY1731FdStatsDmmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of DMMs sent for a two-way delay measurement transaction. " ::= { fsMIY1731FdStatsEntry 2 } fsMIY1731FdStatsDmrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of requests received for a one-way or responses received for two-way delay measurement transaction. " ::= { fsMIY1731FdStatsEntry 3 } fsMIY1731FdStatsDelayAverage OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Average delay measured for a one-way or two-way delay measurement transaction. " ::= { fsMIY1731FdStatsEntry 4 } fsMIY1731FdStatsFDVAverage OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Frame Delay Variation (FDV) average calculated for a delay measurement transaction. " ::= { fsMIY1731FdStatsEntry 5 } fsMIY1731FdStatsIFDVAverage OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Inter Frame Delay Variation (IFDV) average calculated for delay measurement transaction. " ::= { fsMIY1731FdStatsEntry 6 } fsMIY1731FdStatsDelayMin OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the minimum value of frame-delay. " ::= { fsMIY1731FdStatsEntry 7 } fsMIY1731FdStatsDelayMax OBJECT-TYPE SYNTAX FsY1731TimeRepresentation MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maximum value of frame-delay. " ::= { fsMIY1731FdStatsEntry 8 } -- ****************************************************************** -- The Frame Loss Buffer Table -- ****************************************************************** fsMIY1731FlTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731FlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains a information about the Frame-loss measured at various times by a MEP. Size of this table is defined by the object fsMIY1731FrameLossBufferSize. If the addition of a frame loss entry would exceed the resources allocated to table, then the oldest entries in the table are deleted until sufficient resources are available to hold the new frame loss entry. " ::= { fsMIY1731Context 12 } fsMIY1731FlEntry OBJECT-TYPE SYNTAX FsMIY1731FlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Frame Loss Statistics table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731FlTransId, fsMIY1731FlSeqNumber } ::= { fsMIY1731FlTable 1 } FsMIY1731FlEntry ::= SEQUENCE { fsMIY1731FlTransId Unsigned32, fsMIY1731FlSeqNumber Unsigned32, fsMIY1731FlMeasurementTimeStamp TimeStamp, fsMIY1731FlPeerMepMacAddress MacAddress, fsMIY1731FlIfIndex InterfaceIndex, fsMIY1731FlFarEndLoss Unsigned32, fsMIY1731FlNearEndLoss Unsigned32, fsMIY1731FlMeasurementTime TimeInterval } fsMIY1731FlTransId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Identifies a loss measurement transaction. " ::= { fsMIY1731FlEntry 1 } fsMIY1731FlSeqNumber OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Locally maintained sequence number of Frame Loss Entries" ::= { fsMIY1731FlEntry 2 } fsMIY1731FlMeasurementTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time at which frame-loss is actually measured. " ::= { fsMIY1731FlEntry 3 } fsMIY1731FlPeerMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Mac Address of the peer MEP to which loss measurement message(s) is sent. " ::= { fsMIY1731FlEntry 4 } fsMIY1731FlIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP at which measurement takes place is attached. " ::= { fsMIY1731FlEntry 5 } fsMIY1731FlFarEndLoss OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the far-end frame-loss value. " ::= { fsMIY1731FlEntry 6 } fsMIY1731FlNearEndLoss OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the near-end frame-loss value. " ::= { fsMIY1731FlEntry 7 } fsMIY1731FlMeasurementTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time taken to measure frame-loss. " ::= { fsMIY1731FlEntry 8 } -- ****************************************************************** -- The Frame Loss Statistics Table -- ****************************************************************** fsMIY1731FlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731FlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which extends the MEP table and contains output of frame-loss measurement transaction. " ::= { fsMIY1731Context 13 } fsMIY1731FlStatsEntry OBJECT-TYPE SYNTAX FsMIY1731FlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Frame Loss Statistics table entry." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731FlTransId } ::= { fsMIY1731FlStatsTable 1 } FsMIY1731FlStatsEntry ::= SEQUENCE { fsMIY1731FlStatsTimeStamp TimeStamp, fsMIY1731FlStatsMessagesOut Unsigned32, fsMIY1731FlStatsMessagesIn Unsigned32, fsMIY1731FlStatsFarEndLossAverage Unsigned32, fsMIY1731FlStatsNearEndLossAverage Unsigned32, fsMIY1731FlStatsMeasurementType INTEGER, fsMIY1731FlStatsFarEndLossMin Unsigned32, fsMIY1731FlStatsFarEndLossMax Unsigned32, fsMIY1731FlStatsNearEndLossMin Unsigned32, fsMIY1731FlStatsNearEndLossMax Unsigned32 } fsMIY1731FlStatsTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Time stamp at which frame-loss measurement transaction is initiated. " ::= { fsMIY1731FlStatsEntry 1 } fsMIY1731FlStatsMessagesOut OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of frames with ETH-LM information sent for a transaction. " ::= { fsMIY1731FlStatsEntry 2 } fsMIY1731FlStatsMessagesIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Number of frames with ETH-LM information received for a transaction. " ::= { fsMIY1731FlStatsEntry 3 } fsMIY1731FlStatsFarEndLossAverage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Average of the far-end frame-loss measured for a transaction. " ::= { fsMIY1731FlStatsEntry 4 } fsMIY1731FlStatsNearEndLossAverage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Average of the near-end frame-loss measured for a transaction. " ::= { fsMIY1731FlStatsEntry 5 } fsMIY1731FlStatsMeasurementType OBJECT-TYPE SYNTAX INTEGER { singleEnded(1), dualEnded(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Type of the frame-loss measurement (Single-ended or Dual-ended) done. " ::= { fsMIY1731FlStatsEntry 6 } fsMIY1731FlStatsFarEndLossMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the minimum value of far-end frame-loss. " ::= { fsMIY1731FlStatsEntry 7 } fsMIY1731FlStatsFarEndLossMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maxmium value of far-end frame-loss. " ::= { fsMIY1731FlStatsEntry 8 } fsMIY1731FlStatsNearEndLossMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the minimum value of near-end frame-loss. " ::= { fsMIY1731FlStatsEntry 9 } fsMIY1731FlStatsNearEndLossMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the maxmium value of near-end frame-loss. " ::= { fsMIY1731FlStatsEntry 10 } -- ************************************************************************ -- The Remote Maintenance End Point Table for Y.1731 based MPLS-TP networks -- ************************************************************************ fsMIY1731MplstpExtRemoteMepTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731MplstpExtRemoteMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Remote Maintenance End Point table for the Y.1731 extensions over MPLS-TP networks. Each row in the table realizes an ME for the MPLS-TP networks using the local and remote MEP identifiers which are indices to the table. This table is mainly used to associate a specific LSP/PW to an ME. This table uses five indices, first index provides the virtual context identifier in which this entry resides. The second index is the index to the MEG table identifying the specific MD/Level. Third index is the index to ME table identifying the specific MEG. The fourth index is the Local MEP Indentifier. The fifth index is the remote MEP Identifier. The writable objects in this table need to be persistent upon reboot or restart of a device." REFERENCE "MPLS-TP OAM based on Y.1731, draft-bhh-mpls-tp-oam-y1731-06.txt." ::= { fsMIY1731Context 14 } fsMIY1731MplstpExtRemoteMepEntry OBJECT-TYPE SYNTAX FsMIY1731MplstpExtRemoteMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an instance of the Remote Maintenenace End Point table entry used in Y.1731 based MPLS-TP networks." INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier, fsMIY1731MplstpExtRMepIdentifier } ::= { fsMIY1731MplstpExtRemoteMepTable 1 } FsMIY1731MplstpExtRemoteMepEntry ::= SEQUENCE { fsMIY1731MplstpExtRMepIdentifier Dot1agCfmMepId, fsMIY1731MplstpExtRMepServicePointer RowPointer, fsMIY1731MplstpExtRMepRowStatus RowStatus } fsMIY1731MplstpExtRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Maintenance End Point Identifier of a Remote MEP associated with the Local-MEP(fsMIY1731MepIdentifier) which together constitutes an ME. " ::= { fsMIY1731MplstpExtRemoteMepEntry 1 } fsMIY1731MplstpExtRMepServicePointer OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the MPLS Transport path which represents the ME. This object may point to an entry in the mplsTunnelTable, if the value of the object fsMIEcfmExtMaPrimarySelectorType in fsMIEcfmExtMaTable is mplsTunnelLsp. Otherwise this object may point to an entry in the pwTable, if the value of the object fsMIEcfmExtMaPrimarySelectorType in fsMIEcfmExtMaTable is mplsPseudoWire. " ::= { fsMIY1731MplstpExtRemoteMepEntry 2 } fsMIY1731MplstpExtRMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { fsMIY1731MplstpExtRemoteMepEntry 3 } -- ******************************************************************* -- ECFM-Y1731 Per Context Statistics Table -- ******************************************************************* fsMIY1731StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the List of per virtual context ECFM-Y1731 Module Statistics." ::= { fsMIY1731Context 15 } fsMIY1731StatsEntry OBJECT-TYPE SYNTAX FsMIY1731StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Per virtual context ECFM-Y1731 Module Statistics." INDEX { fsMIY1731ContextId } ::= { fsMIY1731StatsTable 1 } FsMIY1731StatsEntry ::= SEQUENCE { fsMIY1731AisOut Unsigned32, fsMIY1731AisIn Unsigned32, fsMIY1731LckOut Unsigned32, fsMIY1731LckIn Unsigned32, fsMIY1731TstOut Unsigned32, fsMIY1731TstIn Unsigned32, fsMIY1731LmmOut Unsigned32, fsMIY1731LmmIn Unsigned32, fsMIY1731LmrOut Unsigned32, fsMIY1731LmrIn Unsigned32, fsMIY17311DmOut Unsigned32, fsMIY17311DmIn Unsigned32, fsMIY1731DmmOut Unsigned32, fsMIY1731DmmIn Unsigned32, fsMIY1731DmrOut Unsigned32, fsMIY1731DmrIn Unsigned32, fsMIY1731ApsOut Unsigned32, fsMIY1731ApsIn Unsigned32, fsMIY1731MccOut Unsigned32, fsMIY1731MccIn Unsigned32, fsMIY1731VsmOut Unsigned32, fsMIY1731VsmIn Unsigned32, fsMIY1731VsrOut Unsigned32, fsMIY1731VsrIn Unsigned32, fsMIY1731ExmOut Unsigned32, fsMIY1731ExmIn Unsigned32, fsMIY1731ExrOut Unsigned32, fsMIY1731ExrIn Unsigned32, fsMIY1731TxFailOpcode Unsigned32 } fsMIY1731AisOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of AIS PDUs transmitted. " ::= { fsMIY1731StatsEntry 1 } fsMIY1731AisIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of AIS PDUs received. " ::= { fsMIY1731StatsEntry 2 } fsMIY1731LckOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LCK PDUs transmitted. " ::= { fsMIY1731StatsEntry 3 } fsMIY1731LckIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LCK PDUs received. " ::= { fsMIY1731StatsEntry 4 } fsMIY1731TstOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of TST PDUs transmitted. " ::= { fsMIY1731StatsEntry 5 } fsMIY1731TstIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of TST PDUs received. " ::= { fsMIY1731StatsEntry 6 } fsMIY1731LmmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMM PDUs transmitted. " ::= { fsMIY1731StatsEntry 7 } fsMIY1731LmmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMM PDUs received. " ::= { fsMIY1731StatsEntry 8 } fsMIY1731LmrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMR PDUs transmitted. " ::= { fsMIY1731StatsEntry 9 } fsMIY1731LmrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMR PDUs received. " ::= { fsMIY1731StatsEntry 10 } fsMIY17311DmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of 1DM PDUs transmitted. " ::= { fsMIY1731StatsEntry 11 } fsMIY17311DmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of 1DM PDUs received. " ::= { fsMIY1731StatsEntry 12 } fsMIY1731DmmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMM PDUs transmitted. " ::= { fsMIY1731StatsEntry 13 } fsMIY1731DmmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMM PDUs received. " ::= { fsMIY1731StatsEntry 14 } fsMIY1731DmrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMR PDUs transmitted. " ::= { fsMIY1731StatsEntry 15 } fsMIY1731DmrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMR PDUs received. " ::= { fsMIY1731StatsEntry 16 } fsMIY1731ApsOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of APS PDUs transmitted. " ::= { fsMIY1731StatsEntry 17 } fsMIY1731ApsIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of APS PDUs received. " ::= { fsMIY1731StatsEntry 18 } fsMIY1731MccOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of MCC PDUs transmitted. " ::= { fsMIY1731StatsEntry 19 } fsMIY1731MccIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of MCC PDUs received. " ::= { fsMIY1731StatsEntry 20 } fsMIY1731VsmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSM PDUs transmitted. " ::= { fsMIY1731StatsEntry 21 } fsMIY1731VsmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSM PDUs received. " ::= { fsMIY1731StatsEntry 22 } fsMIY1731VsrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSR PDUs transmitted. " ::= { fsMIY1731StatsEntry 23 } fsMIY1731VsrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSR PDUs received. " ::= { fsMIY1731StatsEntry 24 } fsMIY1731ExmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXM PDUs transmitted. " ::= { fsMIY1731StatsEntry 25 } fsMIY1731ExmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXM PDUs received. " ::= { fsMIY1731StatsEntry 26 } fsMIY1731ExrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXR PDUs transmitted. " ::= { fsMIY1731StatsEntry 27 } fsMIY1731ExrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXR PDUs received. " ::= { fsMIY1731StatsEntry 28 } fsMIY1731TxFailOpcode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure trap is generated and the trap contains this value. " ::= { fsMIY1731StatsEntry 29 } -- ****************************************************************** -- The Port Table -- ****************************************************************** fsMIY1731PortTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies ECFM information specific to interface. " ::= { fsMIY1731System 1 } fsMIY1731PortEntry OBJECT-TYPE SYNTAX FsMIY1731PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies Each entry in this table is for each interface present in the system. This table is indexed by the fsMIY1731PortIfIndex " INDEX { fsMIY1731PortIfIndex } ::= { fsMIY1731PortTable 1 } FsMIY1731PortEntry ::= SEQUENCE { fsMIY1731PortIfIndex InterfaceIndex, fsMIY1731PortAisOut Unsigned32, fsMIY1731PortAisIn Unsigned32, fsMIY1731PortLckOut Unsigned32, fsMIY1731PortLckIn Unsigned32, fsMIY1731PortTstOut Unsigned32, fsMIY1731PortTstIn Unsigned32, fsMIY1731PortLmmOut Unsigned32, fsMIY1731PortLmmIn Unsigned32, fsMIY1731PortLmrOut Unsigned32, fsMIY1731PortLmrIn Unsigned32, fsMIY1731Port1DmOut Unsigned32, fsMIY1731Port1DmIn Unsigned32, fsMIY1731PortDmmOut Unsigned32, fsMIY1731PortDmmIn Unsigned32, fsMIY1731PortDmrOut Unsigned32, fsMIY1731PortDmrIn Unsigned32, fsMIY1731PortApsOut Unsigned32, fsMIY1731PortApsIn Unsigned32, fsMIY1731PortMccOut Unsigned32, fsMIY1731PortMccIn Unsigned32, fsMIY1731PortVsmOut Unsigned32, fsMIY1731PortVsmIn Unsigned32, fsMIY1731PortVsrOut Unsigned32, fsMIY1731PortVsrIn Unsigned32, fsMIY1731PortExmOut Unsigned32, fsMIY1731PortExmIn Unsigned32, fsMIY1731PortExrOut Unsigned32, fsMIY1731PortExrIn Unsigned32, fsMIY1731PortOperStatus FsY1731EnabledStatus, fsMIY1731LastTxFailOpcode Unsigned32 } fsMIY1731PortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port. " ::= { fsMIY1731PortEntry 1 } fsMIY1731PortAisOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of AIS PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 2 } fsMIY1731PortAisIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of AIS PDUs received by this interface. " ::= { fsMIY1731PortEntry 3 } fsMIY1731PortLckOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LCK PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 4 } fsMIY1731PortLckIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LCK PDUs received by this interface. " ::= { fsMIY1731PortEntry 5 } fsMIY1731PortTstOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of TST PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 6 } fsMIY1731PortTstIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of TST PDUs received by this interface. " ::= { fsMIY1731PortEntry 7 } fsMIY1731PortLmmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMM PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 8 } fsMIY1731PortLmmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMM PDUs received by this interface. " ::= { fsMIY1731PortEntry 9 } fsMIY1731PortLmrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMR PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 10 } fsMIY1731PortLmrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of LMR PDUs received by this interface. " ::= { fsMIY1731PortEntry 11 } fsMIY1731Port1DmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of 1DM PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 12 } fsMIY1731Port1DmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of 1DM PDUs received by this interface. " ::= { fsMIY1731PortEntry 13 } fsMIY1731PortDmmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMM PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 14 } fsMIY1731PortDmmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMM PDUs received by this interface. " ::= { fsMIY1731PortEntry 15 } fsMIY1731PortDmrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMR PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 16 } fsMIY1731PortDmrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of DMR PDUs received by this interface. " ::= { fsMIY1731PortEntry 17 } fsMIY1731PortApsOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of APS PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 18 } fsMIY1731PortApsIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of APS PDUs received by this interface. " ::= { fsMIY1731PortEntry 19 } fsMIY1731PortMccOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of MCC PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 20 } fsMIY1731PortMccIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of MCC PDUs received by this interface. " ::= { fsMIY1731PortEntry 21 } fsMIY1731PortVsmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSM PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 22 } fsMIY1731PortVsmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSM PDUs received by this interface. " ::= { fsMIY1731PortEntry 23 } fsMIY1731PortVsrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSR PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 24 } fsMIY1731PortVsrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of VSR PDUs received by this interface. " ::= { fsMIY1731PortEntry 25 } fsMIY1731PortExmOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXM PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 26 } fsMIY1731PortExmIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXM PDUs received by this interface. " ::= { fsMIY1731PortEntry 27 } fsMIY1731PortExrOut OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXR PDUs transmitted by this interface. " ::= { fsMIY1731PortEntry 28 } fsMIY1731PortExrIn OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of EXR PDUs received by this interface. " ::= { fsMIY1731PortEntry 29 } fsMIY1731PortOperStatus OBJECT-TYPE SYNTAX FsY1731EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the administrative module status of Ethernet Y1731 functionality. This enables or disables Y1731 in the system. If set to enable, enables the Y1731 for a particular port. Otherwise, disables Y1731 for a particular port. Note: The ECFM Module must be enabled for Y1731 to enable or disable." DEFVAL { disabled } ::= { fsMIY1731PortEntry 30 } fsMIY1731LastTxFailOpcode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the Opcode value of Last Tx Failure CFM PDU. When CFM PDU is not transmitted from system due to system failure then CFM PDU Tx failure trap will generate & which contain this value. " ::= { fsMIY1731PortEntry 31 } -- ****************************************************************** -- MEP AVilability Table -- ****************************************************************** fsMIY1731MepAvailabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731MepAvailabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Maintenance Entity Group End Point (MEP) Availability table. Each row in the table is associated with a different MEP. This table uses three indices. The first two indices are the indices of the Maintenance Entity Group (MEG) and Maintenance Entity (ME) tables, the reason being that a MEP is always related to an ME and MEG. The MEP table stores all the managed objects for availability measurement. The objects which are used to initiate a transaction are to be set only when the row-status of the table is active. 'fsMIY1731MepTransmit' naming convention is used to isolate these objects from the others. " ::= { fsMIY1731Context 16 } fsMIY1731MepAvailabilityEntry OBJECT-TYPE SYNTAX FsMIY1731MepAvailabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the MEP Availability table entry" INDEX { fsMIY1731ContextId, fsMIY1731MegIndex, fsMIY1731MeIndex, fsMIY1731MepIdentifier } ::= { fsMIY1731MepAvailabilityTable 1 } FsMIY1731MepAvailabilityEntry ::= SEQUENCE { fsMIY1731MepAvailabilityStatus FsY1731TransmitStatus, fsMIY1731MepAvailabilityResultOK TruthValue, fsMIY1731MepAvailabilityInterval FsY1731AvailabilityInterval, fsMIY1731MepAvailabilityDeadline Unsigned32, fsMIY1731MepAvailabilityLowerThreshold OCTET STRING, fsMIY1731MepAvailabilityUpperThreshold OCTET STRING, fsMIY1731MepAvailabilityModestAreaIsAvailable TruthValue, fsMIY1731MepAvailabilityWindowSize Unsigned32, fsMIY1731MepAvailabilityDestMacAddress MacAddress, fsMIY1731MepAvailabilityDestMepId Dot1agCfmMepIdOrZero, fsMIY1731MepAvailabilityDestIsMepId TruthValue, fsMIY1731MepAvailabilityType FsY1731AvailabilityType, fsMIY1731MepAvailabilitySchldDownInitTime Unsigned32, fsMIY1731MepAvailabilitySchldDownEndTime Unsigned32, fsMIY1731MepAvailabilityPriority Unsigned32, fsMIY1731MepAvailabilityDropEnable TruthValue, fsMIY1731MepAvailabilityPercentage OCTET STRING, fsMIY1731MepAvailabilityRowStatus RowStatus } fsMIY1731MepAvailabilityStatus OBJECT-TYPE SYNTAX FsY1731TransmitStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an Enumerated value set to 'start' to initiate Avilability Measurement and 'stop' to stop Availability Measurement. 'ready' and 'notReady' indicates whether Availability Measurement can be initiated or not. Note: User can not set to 'ready' or 'notReady'. " DEFVAL { ready } ::= { fsMIY1731MepAvailabilityEntry 1 } fsMIY1731MepAvailabilityResultOK OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the result of the operation: - true Initiating Availability measurement by sending LM Message (LMM) is successful. - false Initiating Availability measurement has failed as failure encountered in sending LM Message (LMM). " DEFVAL { true } ::= { fsMIY1731MepAvailabilityEntry 2 } fsMIY1731MepAvailabilityInterval OBJECT-TYPE SYNTAX FsY1731AvailabilityInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a time interval much smaller than Deadline, Interval between two successive LMM transmissions to be used by the MEP for calculating Availability. " DEFVAL { interval100ms } ::= { fsMIY1731MepAvailabilityEntry 3 } fsMIY1731MepAvailabilityDeadline OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a timeout, in seconds, the Time interval to conduct the availability functionality " ::= { fsMIY1731MepAvailabilityEntry 4 } fsMIY1731MepAvailabilityLowerThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Availability frame loss ratio threshold, the lower threshold used to define an interval as available. If far-end loss ratio is lesser than configured lower threshold, that interval will be declared as available. AvailabilityLowerThreshold can be equal to AvailabilityUpperThreshold. Example: 50% should be given as 35:30:2e:30:30 39.61% should be given as 33:39:2e:36:31 " ::= { fsMIY1731MepAvailabilityEntry 5 } fsMIY1731MepAvailabilityUpperThreshold OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..6)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Unavailability frame loss ratio threshold, the upper threshold to define an interval as unavailable. If far-end loss ratio is greater than configured upper threshold, that interval will be declared as unavailable. Example: 50% should be given as 35:30:2e:30:30 39.61% should be given as 33:39:2e:36:31 " ::= { fsMIY1731MepAvailabilityEntry 6 } fsMIY1731MepAvailabilityModestAreaIsAvailable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the area between upper and lower threshold is referred as available or unavailable. True - If Calculated Frame loss ration falls between upper and lower threshold, it will be declared as Available. False - If Calculated Frame loss ration falls between upper and lower threshold, it will be declared as Unavailable. " ::= { fsMIY1731MepAvailabilityEntry 7 } fsMIY1731MepAvailabilityWindowSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Number of consecutive small time intervals for assessing availability " ::= { fsMIY1731MepAvailabilityEntry 8 } fsMIY1731MepAvailabilityDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Target MAC Address Field to be transmitted: A unicast destination MAC address to be used for Availability Measurement. " ::= { fsMIY1731MepAvailabilityEntry 9 } fsMIY1731MepAvailabilityDestMepId OBJECT-TYPE SYNTAX Dot1agCfmMepIdOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies an indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address will be used if the value of the column fsMIY1731MepAvailabilityDestIsMepId is 'true'. " ::= { fsMIY1731MepAvailabilityEntry 10 } fsMIY1731MepAvailabilityDestIsMepId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object when True indicates that MEPID of the target MEP is used for LMM transmission during Availability Measurement. False indicates that unicast destination MAC address of the target MEP is used for LMM transmission during Availability Measurement. " ::= { fsMIY1731MepAvailabilityEntry 11 } fsMIY1731MepAvailabilityType OBJECT-TYPE SYNTAX FsY1731AvailabilityType MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the defStatic indicates that the algorithm for Availability Measurement is static window algorithm. The availability measurement will be conducted as per MEF 10.2 (Section 6.9.7. Availability Performance for a Point-to-Point EVC) defSliding indicates that the algorithm for Availability Measurement is sliding window algorithm. The availability measurement will be conducted as per ITU-T Y.1563 ( Section 9 Ethernet service availability ) " DEFVAL { defStatic } ::= { fsMIY1731MepAvailabilityEntry 12 } fsMIY1731MepAvailabilitySchldDownInitTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time when Scheduled down time is initiated, denotes the beginning of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled by the Service Provider. Init Time should be defined with reference to zero and dealine. " ::= { fsMIY1731MepAvailabilityEntry 13 } fsMIY1731MepAvailabilitySchldDownEndTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Time when Scheduled down time is ending, denotes the ending of time interval agreed upon by both the Subscriber and Service Provider during which a service may be disabled by the Service Provider. End Time should be defined with reference to zero and dealine. " ::= { fsMIY1731MepAvailabilityEntry 14 } fsMIY1731MepAvailabilityPriority OBJECT-TYPE SYNTAX Unsigned32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted LMM frame. " DEFVAL { 7 } ::= { fsMIY1731MepAvailabilityEntry 15 } fsMIY1731MepAvailabilityDropEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the Drop Enable bit value to be used in the VLAN tag, if present in the transmitted LMM frame. " DEFVAL { false } ::= { fsMIY1731MepAvailabilityEntry 16 } fsMIY1731MepAvailabilityPercentage OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..6)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the percentage of Availability If fsMIY1731MepAvailabilityType is selected as defStatic, this object contains the Availability Performance metric as defined in MEF 10.2 (Section 6.9.7. Availability Performance for a Point-to-Point EVC) If fsMIY1731MepAvailabilityType is selected as defSliding, this object contains Percent Ethernet service availability as defined in ITU-T Y.1563 ( Section 9 Ethernet service availability ) Example: 50% will be given as 35:30:2e:30:30 39.61% will be given as 33:39:2e:36:31 " ::= { fsMIY1731MepAvailabilityEntry 17 } fsMIY1731MepAvailabilityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the status of MEP Availability Table row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated, possible values are row status active and row status not active. " ::= { fsMIY1731MepAvailabilityEntry 18 } -- ****************************************************************** -- MEP AVilability Table ENDS -- ****************************************************************** -- ****************************************************************** -- NOTIFICATIONS (TRAPS) -- These notifications will be sent to the management entity -- whenever a MEP loses/restores contact with one or more other MEPs. -- ****************************************************************** fsMIY1731FrameLossTrap NOTIFICATION-TYPE OBJECTS { fsMIY1731ContextName, fsMIY1731FlMeasurementTimeStamp, fsMIY1731FlStatsMeasurementType, fsMIY1731FlFarEndLoss, fsMIY1731FlNearEndLoss } STATUS current DESCRIPTION "This object specifies the MEP that can measure frame-loss. A notification is sent to the management entity with the OID of the MEP that has measured frame-loss exceeded thresholds. To warn the system administrator of the problem, as controlled by the MEP If measured frame-loss exceeds threshold is raised after a notification has been sent, another notification is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the frame-loss by the indices in the OID of the each element of trap variable except fsMIY1731ContextName in the notification: fsMIY1731MegIndex - Also the index of the MEP's Maintenance Entity Group table entry (fsMIY1731MegTable). fsMIY1731MeIndex - Also an index (with the MEG table index) of the MEP's Maintenance Entity table entry (fsMIY1731MeTable). fsMIY1731MepIdentifier - MEP Identifier and final index into the MEP table (fsMIY1731MepTable). " ::= { fsMIY1731Notifications 1 } fsMIY1731DefectConditionTrap NOTIFICATION-TYPE OBJECTS { fsMIY1731ContextName, fsMIY1731ErrorLogType } STATUS current DESCRIPTION "This object specifies the a MEP having a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP has a persistent defect, it may or may not generate a Fault Alarm to warn the system administrator of the problem. If a defect is raised after a Fault Alarm has been issued, another Fault Alarm is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the defect by the indices in the OID of the fsMIY1731ErrorLogType variable in the notification: fsMIY1731MegIndex - Also the index of the MEP's Maintenance Entity Group table entry (fsMIY1731MegTable). fsMIY1731MeIndex - Also an index (with the MEG table index) of the MEP's Maintenance Entity table entry (fsMIY1731MeTable). fsMIY1731MepIdentifier - MEP Identifier and final index into the MEP table (fsMIY1731MepTable) " ::= { fsMIY1731Notifications 2 } fsMIY1731TstRecivedWithErrorTrap NOTIFICATION-TYPE OBJECTS { fsMIY1731ContextName, fsMIY1731MepBitErroredTstIn } STATUS current DESCRIPTION "This object specifies the MEP that has received a TST PDU and the validation criteria has failed A notification is sent to the management entity with the OID of the MEP that has received the TST PDU. If a invalid TST PDU is received after a notification has been sent, another notification is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the invalid TST PDU by the indices in the OID of the each element of trap variable except fsMIY1731ContextName in the notification: fsMIY1731MegIndex - Also the index of the MEP's Maintenance Entity Group entry (fsMIY1731MegTable). fsMIY1731MeIndex - Also an index (with the MEG table index) of the MEP's Maintenance Entity table entry (fsMIY1731MeTable). fsMIY1731MepIdentifier - MEP Identifier and final index into the MEP table (fsMIY1731MepTable). " ::= { fsMIY1731Notifications 3 } fsMIY1731FrameDelayTrap NOTIFICATION-TYPE OBJECTS { fsMIY1731ContextName, fsMIY1731FdMeasurementTimeStamp, fsMIY1731FdMeasurementType, fsMIY1731FdDelayValue } STATUS current DESCRIPTION "This object specifies the MEP that can measure iframe-delay. A notification is sent to the management entity with the OID of the MEP that has measured frame-delay exceeded threshold. To warn the system administrator of the problem, as controlled by the MEP If measured frame-delay exceeds threshold is raised after a notification has been sent, another notification is issued. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the MEP reporting the frame-delay by the indices in the OID of the each element of trap variable except fsMIY1731ContextName in the notification: fsMIY1731MegIndex - Also the index of the MEP's Maintenance Entity Group entry (fsMIY1731MegTable). fsMIY1731MeIndex - Also an index (with the MEG table index) of the MEP's Maintenance Entity table entry (fsMIY1731MeTable). fsMIY1731MepIdentifier - MEP Identifier and final index into the MEP table (fsMIY1731MepTable). " ::= { fsMIY1731Notifications 4 } fsMIY1731TxFailTrap NOTIFICATION-TYPE OBJECTS { fsMIY1731LastTxFailOpcode } STATUS current DESCRIPTION "This object is used to warn the system administrator when there is CFM Tx Failure occurred. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the Port Number & Opcode value in the OID Port Number will be appended with the Opcode OID: fsMIY1731LastTxFailOpcode - Last Tx Failure CFM PDU Opcode Value. " ::= { fsMIY1731Notifications 5 } -- ****************************************************************** -- The Loopback Managed Object. This group contains all the MIB -- objects used to maintain Loopback status Entities. -- ****************************************************************** -- ****************************************************************** -- The Loopback Table -- ****************************************************************** fsMIY1731LoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF FsMIY1731LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the table which contains controls for the loopback state of the remote MEP as well as indicates the status of the loopback function. " ::= { fsMIY1731Context 17 } fsMIY1731LoopbackEntry OBJECT-TYPE SYNTAX FsMIY1731LoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry in the table, containing information on the loopback status for a single Ethernet service interface. Entries in the table are automatically created whenever the local entity supports loopback capabilities. The loopback status on the interface can be determined from the fsMIY1731LoopbackStatus object. " INDEX { fsMIY1731ContextId, fsMIY1731LoopbackIndex } ::= { fsMIY1731LoopbackTable 1 } FsMIY1731LoopbackEntry ::= SEQUENCE { fsMIY1731LoopbackIndex VlanId, fsMIY1731LoopbackStatus INTEGER } fsMIY1731LoopbackIndex OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the service provider VLAN (S-VLAN) if value is less than 4094. If the value is greater than 4094 this object indicates VFI. " ::= { fsMIY1731LoopbackEntry 1 } fsMIY1731LoopbackStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the loopback status of the LoopbackIndex. " DEFVAL { disabled } ::= { fsMIY1731LoopbackEntry 2 } END