-- Copyright (C) 2016 Aricent . All Rights Reserved. -- $Id: fsdot1ad.mib,v 1.11 2016/02/28 10:54:48 siva Exp $ ARICENT-DOT1AD-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32, Unsigned32, enterprises FROM SNMPv2-SMI RowStatus, MacAddress, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC EnabledStatus FROM P-BRIDGE-MIB; dot1adMIB MODULE-IDENTITY LAST-UPDATED "201209050000Z" ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE" CONTACT-INFO "support@aricent.com" DESCRIPTION "||||||" REVISION "201209050000Z" DESCRIPTION "||||||" ::= { enterprises futuresoftware(2076) 130} -- Textual Conventions PriorityCodePoint ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To specify the priority code point selection row" SYNTAX INTEGER { codePoint8p0d(1), codePoint7p1d(2), codePoint6p2d(3), codePoint5p3d(4) } VlanId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A 12-bit VLAN ID used in the VLAN Tag header." SYNTAX Integer32 (1..4094) --MIB objects for configuring the IEEE802.1ad Provider Bridging dot1adProviderBridge OBJECT IDENTIFIER ::= { dot1adMIB 1 } -- ------------------------------------------------------------- -- The 802.1ad Provider Bridge Port Configuration Table -- ------------------------------------------------------------- dot1adPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains provider bridge port related configurations. All the values for the objects in this table will take effect only when the Bridge Mode is set as ProviderCoreBridge or ProviderEdgeBridge." ::= { dot1adProviderBridge 1 } dot1adPortEntry OBJECT-TYPE SYNTAX Dot1adPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the information controlling per port configurations for the externally accessible ports of Provider Bridges." INDEX { dot1adPortNum } ::= { dot1adPortTable 1 } Dot1adPortEntry ::= SEQUENCE { dot1adPortNum Integer32, dot1adPortPcpSelectionRow PriorityCodePoint, dot1adPortUseDei TruthValue, dot1adPortReqDropEncoding TruthValue, dot1adPortSVlanPriorityType INTEGER, dot1adPortSVlanPriority INTEGER } dot1adPortNum OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system." ::= { dot1adPortEntry 1 } dot1adPortPcpSelectionRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the row to be used on this port for PCP encoding and PCP decoding tables. PCP encoding and PCP decoding on a port will be based on the row configured as per this mib object for this port. This can be set for all bride port types." DEFVAL { 1 } ::= { dot1adPortEntry 2 } dot1adPortUseDei OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether drop_eligible parameter in the PCP can be used for encoding and decoding. If this object is set to True for the port, then drop_eligible parameter will be encoded in the DEI of transmitted frames. If the DEI is set in the S-tag or the PCP decoding table indicates that drop_eligible True, then drop_eligible will become true for the received frames. If this object is set to False, the DEI will be transmitted as zero and ignored on receipt. This object can be set only on PNPs and external CNPs." DEFVAL { false } ::= { dot1adPortEntry 3 } dot1adPortReqDropEncoding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to True and if the bridge port can not encode particular priorities with drop_eligible, then frames queued with those priorites and drop_eligible true can be discarded and not transmitted. This object can be set only on PNPs and external CNPs." DEFVAL { false } ::= { dot1adPortEntry 4 } dot1adPortSVlanPriorityType OBJECT-TYPE SYNTAX INTEGER { none(0), fixed(1), copy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine the outgoing SVLAN priority type. When dot1adPortSVlanPriorityType is configured as none(0) the outgoing SVLAN priority is not modified. When dot1adPortSVlanPriorityType is configured as fixed(1) the outgoing SVLAN priority is set to a fixed value as per the priority configured in dot1adPortSVlanPriority mib object, When dot1adPortSVlanPriorityType is configured as copy(2) it copies the incoming CVLAN priority to outgoing SVLAN priority of the packets that are being S-tagged on CNP S-tagged and CNP-PortBased Ports." DEFVAL { fixed } ::= { dot1adPortEntry 5 } dot1adPortSVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to set a fixed SVLAN priority to the packets that are being S-tagged on CNP S-tagged and CNP-PortBased Ports. The priority value configured in this object is not applicable when the dot1adPortSVlanPriorityType is copy or none." DEFVAL { 0 } ::= { dot1adPortEntry 6 } -- ---------------------------------------------------------------- -- VID Translation Table -- This is the VID translation table (Ref. IEEE802.1ad/D6 - Section -- (12.13.2.1) -- ---------------------------------------------------------------- dot1adVidTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adVidTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table provides a bidirectional mapping between a Local S-VID and a relay S-VID. This table is applicable only for the externally accessible network ports (i.e.) Customer Network Port / Provider Network Port / Proprietary Customer Network Port." ::= { dot1adProviderBridge 2 } dot1adVidTranslationEntry OBJECT-TYPE SYNTAX Dot1adVidTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies an entry that contains the information of translating a Local Service Vlan in the packet to the Relay Service VLAN. This entry shall only be applicable at Network ports." INDEX { dot1adPortNum, dot1adVidTranslationLocalVid } ::= { dot1adVidTranslationTable 1 } Dot1adVidTranslationEntry ::= SEQUENCE { dot1adVidTranslationLocalVid VlanId, dot1adVidTranslationRelayVid VlanId, dot1adVidTranslationRowStatus RowStatus } dot1adVidTranslationLocalVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object specifies a Service VLAN Identifier used in the S-Tag of frames transmitted and received through this customer Network Port / Provider Network Port / Proprietary Customer Network Port." ::= { dot1adVidTranslationEntry 1 } dot1adVidTranslationRelayVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION " This Service VLAN identifier used by the filtering and forwarding processes of the S-VLAN component in the provider bridge. This Vlan is identified for a given port (CNP/ Prop CNP/ PNP) and the specified Local S-VLAN present in the frame." ::= { dot1adVidTranslationEntry 2 } dot1adVidTranslationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'. The Entry in this table is used only when the translation status for a Port (CNP/ PropCNP/PNP) is enabled and the Row status is SET 'active'." ::= { dot1adVidTranslationEntry 3 } -- ------------------------------------------------------------- -- This table is the C-VID Registration table (Ref. Section -- 12.13.3.1 IEEE802.1ad/D6) -- ------------------------------------------------------------- dot1adCVidRegistrationTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adCVidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table provides a mapping between a customer VLAN Identifier (C-VID) and service instance represented by Service VLAN identifier(S-VID) for a customer edge port. An Entry in this table result in 'cvlan' type of SVLAN classification for CEP Ports. This can be configured only on Customer Edge Port." ::= { dot1adProviderBridge 3 } dot1adCVidRegistrationEntry OBJECT-TYPE SYNTAX Dot1adCVidRegistrationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This object specifies an Entry in this table provides functionality of a) Configuring PVID of the internal Customer Network Port of SVLAN component. b) Adding PEP on the C-VLAN component to member set of C-VLAN c) Adding PEP and/or CEP to the untagged set of C-VLAN, if it is desired." INDEX { dot1adPortNum, dot1adCVidRegistrationCVid } ::= { dot1adCVidRegistrationTable 1 } Dot1adCVidRegistrationEntry ::= SEQUENCE { dot1adCVidRegistrationCVid VlanId, dot1adCVidRegistrationSVid VlanId, dot1adCVidRegistrationUntaggedPep TruthValue, dot1adCVidRegistrationUntaggedCep TruthValue, dot1adCVidRegistrationRowStatus RowStatus, dot1adCVidRegistrationSVlanPriorityType INTEGER, dot1adCVidRegistrationSVlanPriority INTEGER } dot1adCVidRegistrationCVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the customer VLAN ID in the customer VLAN tag of an ingress frame at this specified port or the customer VLAN ID to which the ingress frame is classified to, at this specified port." ::= { dot1adCVidRegistrationEntry 1 } dot1adCVidRegistrationSVid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the S-VLAN Id for the service instance to which this port and this C-VLAN are mapped to. ie) CEP,C-VID ===> S-VID." ::= { dot1adCVidRegistrationEntry 2 } dot1adCVidRegistrationUntaggedPep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to retain/add/remove the Customer VLAN tag from the packet, before sending it out of Provider Edge Port (PEP). When it is set to 'True' the C-VLAN tag will be stripped. Otherwise the packet will be sent out with a C-tag and with valid C-VID." DEFVAL { false } ::= { dot1adCVidRegistrationEntry 3 } dot1adCVidRegistrationUntaggedCep OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to retain/add/remove the Customer VLAN tag from the packet, before sending it out of Customer Edge Port (CEP). When it is set to 'True' the C-VLAN tag will be stripped. Otherwise the tag will be added if the packet is C-VLAN untagged." DEFVAL { false } ::= { dot1adCVidRegistrationEntry 4 } dot1adCVidRegistrationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is deleted when this object is SET 'destroy'." ::= { dot1adCVidRegistrationEntry 5 } dot1adCVidRegistrationSVlanPriorityType OBJECT-TYPE SYNTAX INTEGER { none(0), fixed(1), copy(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to determine the outgoing SVLAN priority type. When dot1adCVidRegistrationSVlanPriorityType is configured as none(0) the outgoing SVLAN priority is not modified. When dot1adCVidRegistrationSVlanPriorityType is configured as fixed(1) the outgoing SVLAN priority is set to a fixed value as per the priority configured in dot1adCVidRegistrationSVlanPriority mib object, When dot1adCVidRegistrationSVlanPriorityType is configured as copy(2) it copies the incoming CVLAN priority to outgoing SVLAN priority of the packets that are being S-tagged on a CEP port." DEFVAL { fixed } ::= { dot1adCVidRegistrationEntry 6 } dot1adCVidRegistrationSVlanPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The object is used to set a fixed SVLAN priority to the packets that are being S-tagged on a CEP port. The priority value configured in this object is not applicable when the dot1adCVidRegistrationSVlanPriorityType is copy or none." DEFVAL { 0 } ::= { dot1adCVidRegistrationEntry 7 } -- ---------------------------------------------------------------- -- Provider Edge Port configuration table (Ref. IEEE802.1ad/D6 - Section -- 12.13.3.3 and 12.13.3.4) -- ---------------------------------------------------------------- dot1adPepTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adPepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table provides configuration options (PVID,Acceptable frame type, default user priority and ingress filtering) for the internal PEP interfaces created when an entry is created in C-VID registration table." ::= { dot1adProviderBridge 4 } dot1adPepEntry OBJECT-TYPE SYNTAX Dot1adPepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the entry that contains information (PVID, Acceptable frame type, default user priority and ingress filtering) for the packets received over internal PEPs. Creation of an entry in this table is not allowed and only modification is allowed." INDEX {dot1adPortNum, dot1adCVidRegistrationSVid } ::= { dot1adPepTable 1 } Dot1adPepEntry ::= SEQUENCE { dot1adPepPvid VlanId, dot1adPepDefaultUserPriority INTEGER, dot1adPepAccptableFrameTypes INTEGER, dot1adPepIngressFiltering TruthValue } dot1adPepPvid OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the VLAN ID to be used for the untagged packets received over this PEP. This refers to the customer VLAN ID to which the untagged packets received over this PEP will be classified. And this is the VLAN ID put in the C-VLAN tag when the outgoing CEP is tagged i.e. untagged CEP is set to False for this port in the C-VID registration table entry." ::= { dot1adPepEntry 1 } dot1adPepDefaultUserPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The default ingress user priority to be used for the untagged packets received over provider edge ports. This will be used for the PCP encoding of C-VLAN tag for the outgoing packets when the outgoing CEP is tagged i.e. untagged CEP is set to False in the C-VID registration table entry for this port." DEFVAL { 0 } ::= { dot1adPepEntry 2 } dot1adPepAccptableFrameTypes OBJECT-TYPE SYNTAX INTEGER { admitAll(1), admitOnlyVlanTagged(2), admitOnlyUntaggedAndPriorityTagged (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1) is set, all frames tagged/untagged/priority tagged frames received on this port will be accepted. When admitOnlyUntaggedAndPriorityTagged(3) is set, untagged and priority tagged frames alone will be accepted and tagged frames received over this PEP will be discarded." DEFVAL { admitAll } ::= { dot1adPepEntry 3 } dot1adPepIngressFiltering OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this is true(1), if this port is not in the member set of a C-VLAN, then frames received on this port classified to that C-VLAN will be discarded. When false(2), the port will accept all incoming frames received over this PEP." DEFVAL { false } ::= { dot1adPepEntry 4 } -- ---------------------------------------------------------------- -- Service Priority regeneration configuration table (Ref. -- IEEE802.1ad/D6 - Section 12.13.3.5 and 12.13.3.6) -- ---------------------------------------------------------------- dot1adServicePriorityRegenerationTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adServicePriorityRegenerationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps each receive priority to a regenerated priority on this internal customer network port. Creation of an entry in this table is not allowed and only modification is allowed. An entry will be created in this table with default values for the CEP and S-VLAN pair, when the corresponding entry is created in C-VID registration table." ::= { dot1adProviderBridge 5 } dot1adServicePriorityRegenerationEntry OBJECT-TYPE SYNTAX Dot1adServicePriorityRegenerationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of incoming priority and regenerated priority for internal customer network ports." INDEX { dot1adPortNum, dot1adCVidRegistrationSVid, dot1adServicePriorityRegenReceivedPriority } ::= { dot1adServicePriorityRegenerationTable 1 } Dot1adServicePriorityRegenerationEntry ::= SEQUENCE { dot1adServicePriorityRegenReceivedPriority INTEGER, dot1adServicePriorityRegenRegeneratedPriority INTEGER } dot1adServicePriorityRegenReceivedPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The received priority value for a frame over the internal customer network port. For tagged packets, this refers to the priority of C-tag received over the CEPs. For untagged packets, the default user priority of CEP will be used as the receive priority." ::= { dot1adServicePriorityRegenerationEntry 1 } dot1adServicePriorityRegenRegeneratedPriority OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The regenerated priority value for the received priority for a frame received over the internal customer network port. The PCP encoding for the frames that are to be sent out will be based on the regenerated priority value got from this object." ::= { dot1adServicePriorityRegenerationEntry 2 } -- ---------------------------------------------------------------- -- PCP decoding table (Priority Code Point decoding table) -- (Ref. IEEE802.1ad/D6 - section 12.6.2.8 and 12.6.2.9) -- ---------------------------------------------------------------- dot1adPcpDecodingTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adPcpDecodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority and drop_eligible parameters of the received frames are decoded from the PCP using Priority Code Point decoding table. For each port, the PCP decoding table has eight entries corresponding to each of the possible PCP values." ::= { dot1adProviderBridge 6 } dot1adPcpDecodingEntry OBJECT-TYPE SYNTAX Dot1adPcpDecodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the priority and drop_eligible information for a particular port, PCP selection row and PCP value. Creation of an entry in this table is not allowed and only modification is permitted." INDEX { dot1adPortNum, dot1adPcpDecodingPcpSelRow, dot1adPcpDecodingPcpValue } ::= { dot1adPcpDecodingTable 1 } Dot1adPcpDecodingEntry ::= SEQUENCE { dot1adPcpDecodingPcpSelRow PriorityCodePoint, dot1adPcpDecodingPcpValue INTEGER, dot1adPcpDecodingPriority INTEGER, dot1adPcpDecodingDropEligible TruthValue } dot1adPcpDecodingPcpSelRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PCP selection row in the decoding table for which the priority and drop eligible parameters are to be mapped for a given PCP value." ::= { dot1adPcpDecodingEntry 1 } dot1adPcpDecodingPcpValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PCP value in the decoding table for which the priority and drop eligible parameters are to be derived." ::= { dot1adPcpDecodingEntry 2 } dot1adPcpDecodingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the priority associated with the particular PCP and PCP selection row in the PCP decoding table. This is the priority decoded for the PCP associated with the received frame. The frame will further be processed with this priority value." ::= { dot1adPcpDecodingEntry 3 } dot1adPcpDecodingDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The drop_eligible value associated with the particular PCP and PCP selection row in the PCP decoding table. When this is set to True, frames should be discarded in preference to other frames with drop_eligible False." ::= { dot1adPcpDecodingEntry 4 } -- ---------------------------------------------------------------- -- PCP encoding table (Priority Code Point encoding table) -- (Ref. IEEE802.1ad/D6 - section 12.6.2.10 and 12.6.2.11) -- ---------------------------------------------------------------- dot1adPcpEncodingTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot1adPcpEncodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority and drop_eligible parameters are encoded in the Priority Code Point field of the VLAN tag using the Priority Code Point encoding table for the port. For each port, PCP encoding table has 16 entries, corresponding to each of the possible combinations of the eight possible values of priority and two possible values of drop_eligible." ::= { dot1adProviderBridge 7 } dot1adPcpEncodingEntry OBJECT-TYPE SYNTAX Dot1adPcpEncodingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry contains the PCP value for a particular port, PCP selection row, priority and drop_eligible value. Creation of an entry in this table is not allowed and only modification is permitted." INDEX {dot1adPortNum, dot1adPcpEncodingPcpSelRow, dot1adPcpEncodingPriority, dot1adPcpEncodingDropEligible } ::= { dot1adPcpEncodingTable 1 } Dot1adPcpEncodingEntry ::= SEQUENCE { dot1adPcpEncodingPcpSelRow PriorityCodePoint, dot1adPcpEncodingPriority INTEGER, dot1adPcpEncodingDropEligible TruthValue, dot1adPcpEncodingPcpValue INTEGER } dot1adPcpEncodingPcpSelRow OBJECT-TYPE SYNTAX PriorityCodePoint MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the PCP selection row in the encoding table for which the the PCP value to be mapped for a particular priority and drop_eligible combination." ::= { dot1adPcpEncodingEntry 1 } dot1adPcpEncodingPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the priority associated with a particular PCP selection row.Priority and drop_eligible combination for a particular port will be mapped to a PCP valule." ::= { dot1adPcpEncodingEntry 2 } dot1adPcpEncodingDropEligible OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object specifies the drop_eligible parameter associated with a particular priority and PCP selection row in the PCP encoding table." ::= { dot1adPcpEncodingEntry 3 } dot1adPcpEncodingPcpValue OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the PCP value associated with the particular priority and drop_eligible combination of the PCP selection row in PCP encoding table. This will be encoded in the transmitted frames." ::= { dot1adPcpEncodingEntry 4 } END