-- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Friday, October 14, 2005 at 09:22:29 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Thursday, October 13, 2005 at 08:41:43 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Monday, September 26, 2005 at 18:58:05 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Thursday, September 22, 2005 at 13:53:14 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Thursday, September 22, 2005 at 10:45:37 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Tuesday, May 24, 2005 at 14:58:52 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Tuesday, May 24, 2005 at 14:55:26 -- -- SamsungPrint.mib -- MIB generated by MG-SOFT Visual MIB Builder Version 3.0 Build 253 -- Tuesday, May 24, 2005 at 14:10:20 -- SAMSUNG-PRINTER-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS hrDeviceIndex FROM HOST-RESOURCES-MIB prtGeneralEntry, prtInputEntry, prtOutputEntry, prtChannelEntry, prtInterpreterIndex, prtInterpreterEntry, PresentOnOff FROM Printer-MIB samsungCommonMIB FROM SAMSUNG-COMMON-MIB Ordinal32, Cardinal32 FROM SAMSUNG-GENERAL-TC ScmPrtOutputOffsetStackingType FROM SAMSUNG-PRINTER-EXT-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus, DisplayString FROM SNMPv2-TC; -- Module: Printer MIB -- File: SamsungPrint.mib -- Editors: wono.song@samsung.com -- Date: July 17, 2004 -- Version: 1.00 -- RFC 1442/1902/2578 -- RFC 1443/1903/2579 -- RFC 1444/1904/2580 -- Successor to RFC 1759 -- 17 Jul 2004 -- July 17, 1904 at 00:00 GMT -- July 17, 1904 at 00:00 GMT -- July 17, 1904 at 00:00 GMT scmPrintMIB MODULE-IDENTITY LAST-UPDATED "190407170000Z" -- July 17, 1904 at 00:00 GMT ORGANIZATION "Samsung Common Management Interface Working Group" CONTACT-INFO " SCMI Editors E-Mail: wono.song@samsung.com -- -- " DESCRIPTION " Version: 1.00 Samsung SCMI Extension to IETF Printer MIB Module. This Module provides extension to the IETF Printer MIB. Copyright (C) 2003-2004 Samsung Corporation. All Rights Reserved." ::= { samsungCommonMIB 55 } -- -- Node definitions -- -- Node definitions -- -- Node definitions -- -- Groups in the SAMSUNG-PRINTER-EXT-MIB -- -- 1.3.6.1.4.1.236.11.5.11.55.1 -- 1.3.6.1.4.1.236.11.5.11.55.1 scmPrtBase OBJECT IDENTIFIER ::= { scmPrintMIB 1 } -- 1.3.6.1.4.1.236.11.5.11.55.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.1.2 scmPrtBaseTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of general counters and information for ease of use of the SCMI Extension to IETF Printer MIB Module and the IETF Printer MIB on this host system. Usage: The ONLY valid row in the 'scmPrtBaseTable' shall ALWAYS have an 'scmPrtBaseIndex' of one ('1')." ::= { scmPrtBase 2 } -- 1.3.6.1.4.1.236.11.5.11.55.1.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.1.2.1 scmPrtBaseEntry OBJECT-TYPE SYNTAX ScmPrtBaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of general counters and information for ease of use of the SCMI Extension to IETF Printer MIB Module and the IETF Printer MIB on this host system. Usage: The ONLY valid row in the 'scmPrtBaseTable' shall ALWAYS have an 'scmPrtBaseIndex' of one ('1')." INDEX { scmPrtBaseIndex } ::= { scmPrtBaseTable 1 } ScmPrtBaseEntry ::= SEQUENCE { scmPrtBaseIndex Ordinal32, scmPrtBaseRowStatus RowStatus } -- 1.3.6.1.4.1.236.11.5.11.55.1.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.1.2.1.1 scmPrtBaseIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value used by this host system to identify this conceptual row in the 'scmPrtBaseTable'. Usage: The ONLY valid row in the 'scmPrtBaseTable' shall ALWAYS have an 'scmPrtBaseIndex' of one ('1')." ::= { scmPrtBaseEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.1.2.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.1.2.1.2 scmPrtBaseRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to display status of the ONLY valid conceptual row in the 'scmPrtBaseTable'. Usage: 'scmPrtBaseRowStatus' is 'read-only' because the ONLY valid conceptual row shall NOT be deleted." ::= { scmPrtBaseEntry 2 } -- 1.3.6.1.4.1.236.11.5.11.55.2 -- 1.3.6.1.4.1.236.11.5.11.55.2 scmPrtMIBConformance OBJECT IDENTIFIER ::= { scmPrintMIB 2 } -- Compliance statements -- -- this module -- -- Compliance Statements for the Conditionally Mandatory Groups. -- -- -- MIN Compliance statements for the scmPrtBaseGroup -- -- subset of RowStatus -- -- MIN Compliance statements for the scmPrtGeneralGroup -- -- subset of RowStatus -- -- MIN Compliance statements for the scmPrtInputGroup -- -- subset of RowStatus -- -- MIN Compliance statements for the scmPrtOutputGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtChannelGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtInterpreterGroup -- -- subset of RowStatus -- -- -- MAX-ACCESS statements for the scmPrtMakerGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtOperationGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtConfigurationGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtCountGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtSerialGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtPCLGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtKS5843Group -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtKSSMGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtIPPGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtAlertGroup -- -- subset of RowStatus -- -- MAX-ACCESS statements for the scmPrtConsoleDisplayBufferGroup -- -- subset of RowStatus -- -- ########################################## -- -- -- 1.3.6.1.4.1.236.11.5.11.55.2.1 -- this module -- this module -- this module -- 1.3.6.1.4.1.236.11.5.11.55.2.1 scmPrtMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION " The compliance statement for agents that implement the printer MIB extension module." MODULE -- this module MANDATORY-GROUPS { scmPrtBaseGroup } GROUP scmPrtGeneralGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtInputGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtOutputGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtChannelGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtInterpreterGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtMarkerGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtOperationGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtConfiguratioinGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtCountGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtSerialGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtPCLGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtKS5843Group DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtKSSMGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtIPPGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtAlertGroup DESCRIPTION " Implementation of this group is conditionally mandatory." GROUP scmPrtConsoleDisplayBufferGroup DESCRIPTION " Implementation of this group is conditionally mandatory." ::= { scmPrtMIBConformance 1 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3 -- 1.3.6.1.4.1.236.11.5.11.55.2.3 scmPrtMIBGroups OBJECT IDENTIFIER ::= { scmPrtMIBConformance 3 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.1 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.1 scmPrtBaseGroup OBJECT-GROUP OBJECTS { scmPrtBaseRowStatus } STATUS current DESCRIPTION " The general printer group extension." ::= { scmPrtMIBGroups 1 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.5 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.5 scmPrtGeneralGroup OBJECT-GROUP OBJECTS { scmPrtGeneralRowStatus, scmPrtGeneralPrnModelName, scmPrtGeneralPrnModelVer, scmPrtGeneralPrnOSFWVer, scmPrtGeneralPrnSerialNo, scmPrtGeneralPrnPCLFWVer, scmPrtGeneralPrnEngFWVer, scmPrtGeneralPrnSCFFWVer, scmPrtGeneralPrnEpsonVer, scmPrtGeneralPrnPCL5eVer, scmPrtGeneralPrnPSFWVer, scmPrtGeneralPrnScanFWVer, scmPrtGeneralPrnKS5843Ver, scmPrtGeneralPrnKSSMVer, scmPrtGeneralPrnKS5895Ver, scmPrtGeneralPrnMainSystemVer, scmPrtGeneralPrnSPLVer, scmPrtGeneralPrncolorPPM, scmPrtGeneralPrnPCL5CeVer, scmPrtGeneralPrnModelDescr, scmPrtGeneralPrnManufacture, scmPrtGeneralPrnVendor } STATUS current DESCRIPTION " The general printer group extension." ::= { scmPrtMIBGroups 5 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.8 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.8 scmPrtInputGroup OBJECT-GROUP OBJECTS { scmPrtInputRowStatus, scmPrtInputNextPrtInputIndex, scmPrtInputUseCustomSize, scmPrtInputCustDimFeedDirDecl, scmPrtInputCustDimXFeedDirDecl, scmPrtInputTrayPriority, scmPrtInputPaperSize, scmPrtInputPaperSizeOptions, scmPrtInputTrayNum, scmPrtInputTrayNumOptions, scmPrtInputTraySwitch, scmPrtInputTraySwitchOptions, scmPrtInputLockTray, scmPrtInputLockTrayOptions, scmPrtInputPaperType, scmPrtInputPaperTypeOptions } STATUS current DESCRIPTION " The input group extension." ::= { scmPrtMIBGroups 8 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.9 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.9 scmPrtOutputGroup OBJECT-GROUP OBJECTS { scmPrtOutputRowStatus, scmPrtOutputNextIndex, scmPrtOutputPassword, scmPrtOutputOffsetStackingType, scmPrtOutputTrayTimeoutSupport, scmPrtOutputTrayTimeout, scmPrtOutputFinishier, scmPrtOutputFinishierOptions } STATUS current DESCRIPTION " The output group extension." ::= { scmPrtMIBGroups 9 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.14 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.14 scmPrtChannelGroup OBJECT-GROUP OBJECTS { scmPrtChannelRowStatus, scmPrtChannelEOJTimeout } STATUS current DESCRIPTION " The Channel group extension." ::= { scmPrtMIBGroups 14 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.15 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.15 scmPrtInterpreterGroup OBJECT-GROUP OBJECTS { scmPrtInterpRowStatus, scmPrtInterpJobCopiesDefault, scmPrtInterpLineTerm, scmPrtInterpProcessBarcodes, scmPrtInterpOrientation, scmPrtInterpOrientationOptions, scmPrtInterpreterCopyNum, scmPrtInterpreterEmulation, scmPrtInterpreterEmulationOptions } STATUS current DESCRIPTION " The interpreter group extension." ::= { scmPrtMIBGroups 15 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.17 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.17 scmPrtMarkerGroup OBJECT-GROUP OBJECTS { scmPrtMarkerResolution, scmPrtMarkerResolutionOptions, scmPrtMarkerTonerIndex, scmPrtMarkerTonerColor, scmPrtMarkerTonerColorDescription, scmPrtMarkerSrt, scmPrtMarkerMarginUnit, scmPrtMarkerTonerLevel, scmPrtMarkerDensity, scmPrtMarkerSrtOptions, scmPrtMarkerDensityOptions, scmPrtMarkerSmetMode, scmPrtMarkerSmetModeOptions, scmPrtMarkerduplexTopMargin, scmPrtMarkerduplexLeftMargin, scmPrtMarkerShortEdgeBindingMargin, scmPrtMarkerLongEdgeBindingMargin, scmPrtMarkerTonerSave, scmPrtMarkerTonerSaveOptions, scmPrtMarkerTonerOutAction, scmPrtMarkerTonerOutActionOptions } STATUS current DESCRIPTION " The Marker Group." ::= { scmPrtMIBGroups 17 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.18 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.18 scmPrtOperationGroup OBJECT-GROUP OBJECTS { scmPrtOperationJobCancel, scmPrtOperarionMenuClear, scmPrtOperationMenuClearOptions, scmPrtOperationFuserClean, scmPrtOperationFuserCleanOptions, scmPrtOperationOpcClean, scmPrtOperationOpcCleanOptions, scmPrtOperationTestPrtRequest, scmPrtOperationPrintFontRequest, scmPrtOperationIndex, scmPrtOperationPrintBlackOnly } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 18 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.19 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.19 scmPrtConfiguratioinGroup OBJECT-GROUP OBJECTS { scmPrtConfigurationPowerSave, scmPrtConfigurationPowerSaveOptions, scmPrtConfigurationAutocont, scmPrtConfigurationAutoCountOptions, scmPrtConfigurationJam2Recover, scmPrtConfigurationJam2RecOptions, scmPrtConfigurationAltitudeAction, scmPrtConfigurationAltitudeActionOptions, scmPrtConfigurationIndex } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 19 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.20 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.20 scmPrtCountGroup OBJECT-GROUP OBJECTS { scmPrtCountDrumImageCount, scmPrtCountDrumImageCountReset, scmPrtCountTransferImageCount, scmPrtCountTransferImageCountReset, scmPrtCountFuserImageCount, scmPrtCountFuserImageCountReset, scmPrtCountTwoRollerCount, scmPrtCountTwoRollerReset, scmPrtCountPickupMPCount, scmPrtCountPickupMPReset, scmPrtCountPickupTray1Count, scmPrtCountPickupTray1Reset, scmPrtCountPickupTray2Count, scmPrtCountPickupTray2Reset, scmPrtCountIndex, scmPrtCountType, scmPrtCountMediaSize, scmPrtCountColorant, scmPrtCountDuplex, scmPrtCountUnit, scmPrtCountResolution, scmPrtCountValue, scmPrtCountDeviceType } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 20 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.21 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.21 scmPrtSerialGroup OBJECT-GROUP OBJECTS { scmPrtSerialNbaudRate, scmPrtSerialBrOptions, scmPrtSerialBobuxon, scmPrtSerialBobuxonOptions } STATUS current DESCRIPTION " The Serial group." ::= { scmPrtMIBGroups 21 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.22 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.22 scmPrtPCLGroup OBJECT-GROUP OBJECTS { scmPrtPCLFont, scmPrtPCLSymbolSet, scmPrtPCLFormLine, scmPrtPCLPitch, scmPrtPCLPointSize, scmPrtPCLCourier, scmPrtPCLCourierOptions, scmPrtPCLAppendCR, scmPrtPCLAppendCROptions, scmPrtPCLWideA4, scmPrtPCLWideA4Options, scmPrtPCLTopMargin, scmPrtPCLLeftMargin, scmPrtPCLIndex } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 22 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.23 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.23 scmPrtKS5843Group OBJECT-GROUP OBJECTS { scmPrtKS5843Font, scmPrtKS5843FontOptions, scmPrtKS5843Code, scmPrtKS5843CodeOptions, scmPrtKS5843cpi, scmPrtKS5843cpiOptions, scmPrtKS5843Lines, scmPrtKS5843Zoom, scmPrtKS5843AutoWrap, scmPrtKS5843AutoWrapOptions, scmPrtKS5843Topmargin, scmPrtKS5843Sitemode } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 23 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.24 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.24 scmPrtKSSMGroup OBJECT-GROUP OBJECTS { scmPrtKSSMFont, scmPrtKSSMFontOptions, scmPrtKSSMCode, scmPrtKSSMCodeOptions, scmPrtKSSMCPI, scmPrtKSSMCPIOptions, scmPrtKSSMLines, scmPrtKSSMZoom, scmPrtKSSMAutoWrap, scmPrtKSSMAutoWrapOptions, scmPrtKSSMTopMargin, scmPrtKSSMSiteMode } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 24 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.25 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.25 scmPrtIPPGroup OBJECT-GROUP OBJECTS { scmPrtIPPColorSupported, scmPrtIPPJobKOctetsSupportedLBound, scmPrtIPPJobKOctetsSupportedUBound, scmPrtIPPJobImpressionsSupportedLBound, scmPrtIPPJobImpressionsSupportedUBound, scmPrtIPPJobMediaSheetsSupportedLBound, scmPrtIPPJobMediaSheetsSupportedUBound, scmPrtIPPJobSheets, scmPrtIPPCollatedCopiesLBound, scmPrtIPPCollatedCopiesUBound, scmPrtIPPCollatedCopies, scmPrtIPPFinishingsSupported, scmPrtIPPFinishings, scmPrtIPPPageRangesSupported, scmPrtIPPNumberUp, scmPrtIPPNumberUpOptions, scmPrtIPPPrintQuality, scmPrtIPPPrintQualityOptions, scmPrtIPPJobKOctetsProcessed, scmPrtIPPJobImpressionsCompleted, scmPrtIPPJobMediaSheetsCompleted } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 25 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.26 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.26 scmPrtAlertGroup OBJECT-GROUP OBJECTS { scmPrtAlertAlarmShortage, scmPrtAlertAlarmShortageOptions } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 26 } -- 1.3.6.1.4.1.236.11.5.11.55.2.3.27 -- 1.3.6.1.4.1.236.11.5.11.55.2.3.27 scmPrtConsoleDisplayBufferGroup OBJECT-GROUP OBJECTS { scmPrtConsoleDisplayBufferLcdLangType, scmPrtConsoleDisplayBufferLcdLangTypeOptions } STATUS current DESCRIPTION "Description." ::= { scmPrtMIBGroups 27 } -- 1.3.6.1.4.1.236.11.5.11.55.5 -- 1.3.6.1.4.1.236.11.5.11.55.5 scmPrtGeneral OBJECT IDENTIFIER ::= { scmPrintMIB 5 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1 -- 1.3.6.1.4.1.236.11.5.11.55.5.1 scmPrtGeneralSimple OBJECT IDENTIFIER ::= { scmPrtGeneral 1 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.1 scmPrtGeneralPrnModelName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Represent the printer model name currently being connected with NPC." ::= { scmPrtGeneralSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.2 scmPrtGeneralPrnOSFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer Software version number." ::= { scmPrtGeneralSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.3 scmPrtGeneralPrnModelVer OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Model version number." ::= { scmPrtGeneralSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.4 scmPrtGeneralPrnSerialNo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer Serial number." ::= { scmPrtGeneralSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.5 scmPrtGeneralPrnModelDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer HDD Size." ::= { scmPrtGeneralSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.6 scmPrtGeneralPrnManufacture OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer DRAM Size." ::= { scmPrtGeneralSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.7 scmPrtGeneralPrnVendor OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Print Per Minute" ::= { scmPrtGeneralSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.11 scmPrtGeneralPrnPCLFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "PCL Version information of printer" ::= { scmPrtGeneralSimple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.12 scmPrtGeneralPrnEngFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Print Engine FW Version" ::= { scmPrtGeneralSimple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.13 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.13 scmPrtGeneralPrnSCFFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Print SCF FW Version" ::= { scmPrtGeneralSimple 13 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.14 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.14 scmPrtGeneralPrnEpsonVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Print Epson Version" ::= { scmPrtGeneralSimple 14 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.15 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.15 scmPrtGeneralPrnPCL5eVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Print PCL5e Version" ::= { scmPrtGeneralSimple 15 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.16 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.16 scmPrtGeneralPrnPSFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "PS Version information of printer" ::= { scmPrtGeneralSimple 16 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.17 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.17 scmPrtGeneralPrnScanFWVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Scanner FW Version" ::= { scmPrtGeneralSimple 17 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.18 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.18 scmPrtGeneralPrnKS5843Ver OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer KS5843 Version." ::= { scmPrtGeneralSimple 18 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.19 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.19 scmPrtGeneralPrnKSSMVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer KSSM Version." ::= { scmPrtGeneralSimple 19 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.20 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.20 scmPrtGeneralPrnKS5895Ver OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer KS5895 Version." ::= { scmPrtGeneralSimple 20 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.21 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.21 scmPrtGeneralPrnMainSystemVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Printer Main System Versio." ::= { scmPrtGeneralSimple 21 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.22 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.22 scmPrtGeneralPrnSPLVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Print SPL Version" ::= { scmPrtGeneralSimple 22 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.23 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.23 scmPrtGeneralPrncolorPPM OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION " Color Printing PPM" ::= { scmPrtGeneralSimple 23 } -- 1.3.6.1.4.1.236.11.5.11.55.5.1.24 -- 1.3.6.1.4.1.236.11.5.11.55.5.1.24 scmPrtGeneralPrnPCL5CeVer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION " Print PCL5Ce Version" ::= { scmPrtGeneralSimple 24 } -- 1.3.6.1.4.1.236.11.5.11.55.5.2 -- 1.3.6.1.4.1.236.11.5.11.55.5.2 scmPrtGeneralTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table of general information per printer. This table augments the prtGeneralTable." ::= { scmPrtGeneral 2 } -- 1.3.6.1.4.1.236.11.5.11.55.5.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.5.2.1 scmPrtGeneralEntry OBJECT-TYPE SYNTAX ScmPrtGeneralEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists in this table for each device entry in the hostmib device table whose type is printer." AUGMENTS { prtGeneralEntry } ::= { scmPrtGeneralTable 1 } ScmPrtGeneralEntry ::= SEQUENCE { scmPrtGeneralRowStatus RowStatus } -- scmPrtGeneralGroup -- scmPrtGeneralAuxSheetPackage Cardinal32, -- scmPrtGeneralManualFeedTimeout Integer32, -- scmPrtGeneralInputAutoSwitch PresentOnOff, -- scmPrtGeneralOutputAutoSwitch PresentOnOff, -- -- scmPrtGeneralMediumClassDefault ScmPrtMediumClassType, -- scmPrtGeneralDarknessLevels Cardinal32, -- scmPrtGeneralDarknessLevelNorm Cardinal32, -- scmPrtGeneralDarknessLevelDflt Integer32, -- scmPrtGeneralHexDumpEnable PresentOnOff, -- scmPrtGeneralTonerLowStop PresentOnOff, -- -- scmPrtGeneralAuxSheetGroup -- scmPrtGeneralStartupPage PresentOnOff, -- scmPrtGeneralBannerPage PresentOnOff, -- scmPrtGeneralEndBannerPage PresentOnOff, -- -- scmPrtGeneralProdSpecificGroup -- scmPrtGeneralScanlineCompaction PresentOnOff, -- scmPrtGeneralMonoPrintOptimization ScmPrtGeneralMonoPrintOpt -- -- 1.3.6.1.4.1.236.11.5.11.55.5.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.5.2.1.1 scmPrtGeneralRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the scmPrtGeneralTable." ::= { scmPrtGeneralEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.8 -- 1.3.6.1.4.1.236.11.5.11.55.8 scmPrtInput OBJECT IDENTIFIER ::= { scmPrintMIB 8 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1 -- 1.3.6.1.4.1.236.11.5.11.55.8.1 scmPrtInputSimple OBJECT IDENTIFIER ::= { scmPrtInput 1 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.8.1.1 scmPrtInputTraySwitch OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " if language is set to AUTO, this options can the printer anlyzes the stream of data being sent to determine which language is being used by the printer job, and the printer's emulation language automatically be switched if this options is set. " ::= { scmPrtInputSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.8.1.2 scmPrtInputTraySwitchOptions OBJECT-TYPE SYNTAX INTEGER { off(1), auto(2), tray1(4), tray2(8) } MAX-ACCESS read-write STATUS current DESCRIPTION " available options of the model" ::= { scmPrtInputSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.8.1.3 scmPrtInputLockTray OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Trays and combination trays can be locked out of the paper selection process. The available options depend on the configuration of MP tray." ::= { scmPrtInputSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.8.1.4 scmPrtInputLockTrayOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " available options of the model" ::= { scmPrtInputSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.8.1.5 scmPrtInputPaperType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " It determines paper thickness." ::= { scmPrtInputSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.8.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.8.1.6 scmPrtInputPaperTypeOptions OBJECT-TYPE SYNTAX INTEGER { normal(1), thick(2), wet(4), transparency(8) } MAX-ACCESS read-write STATUS current DESCRIPTION " available options of current model" ::= { scmPrtInputSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2 -- 1.3.6.1.4.1.236.11.5.11.55.8.2 scmPrtInputTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table logically augments the Printer MIB's prtInputTable." ::= { scmPrtInput 2 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1 scmPrtInputEntry OBJECT-TYPE SYNTAX ScmPrtInputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries may exist for each entry in the prtInputTable." AUGMENTS { prtInputEntry } ::= { scmPrtInputTable 1 } ScmPrtInputEntry ::= SEQUENCE { scmPrtInputRowStatus RowStatus, scmPrtInputNextPrtInputIndex Integer32, scmPrtInputUseCustomSize PresentOnOff, scmPrtInputCustDimFeedDirDecl Integer32, scmPrtInputCustDimXFeedDirDecl Integer32, scmPrtInputTrayPriority Integer32, scmPrtInputPaperSize Integer32, scmPrtInputPaperSizeOptions INTEGER, scmPrtInputTrayNum Integer32, scmPrtInputTrayNumOptions Integer32 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.1 scmPrtInputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the scmPrtInputTable." ::= { scmPrtInputEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.2 scmPrtInputNextPrtInputIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied. The value of zero indicates that auto input switching will not occur when this input subunit is emptied. Two different mechanisms for input tray switching, scmPrtNextPrtInputIndex and scmPrtInputAliasGroup, are provided. A device agent may make use of one or the other, none, or both. Use the model that fits best for the given application. Usage: Conforming management agents, which ALSO implement the the Printer MIB v2, SHALL set 'scmPrtInputNextPrtInputIndex' to the SAME value as 'prtInputNextIndex' (i.e., the values of these two objects SHALL be interlocked)." REFERENCE " See: scmPrtInputAliasGroup See: scmPrtInterpTraySwitch" DEFVAL { 0 } ::= { scmPrtInputEntry 2 } -- not specified -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.3 scmPrtInputUseCustomSize OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies how this input subunit determines the paper size to use. If the value is 'Off' this input subunit uses the paper size automatically sensed by the subunit. If the value is 'On' this input subunit uses the custom dimensions provided by scmPrtInputCustDimFeedDirDecl and scmPrtInputCustDimXFeedDirDecl." REFERENCE " See: scmPrtInputCustDimFeedDirDecl See: scmPrtInputCustDimXFeedDirDecl" DEFVAL { other } ::= { scmPrtInputEntry 3 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.4 scmPrtInputCustDimFeedDirDecl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Provides the dimension, in the feed direction, of the media in this input subunit, when the value of scmPrtInputUseCustomSize is set to 'On'. When scmPrtInputUseCustomSize is set to On, this value is copied to prtInputMediaDimFeedDirDeclared and prtInputMediaDimFeedDirChosen." REFERENCE " See: scmPrtInputUseCustomSize See: scmPrtInputCustDimXFeedDirDecl" DEFVAL { 0 } ::= { scmPrtInputEntry 4 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.5 scmPrtInputCustDimXFeedDirDecl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Provides the dimension, in the feed direction, of the media in this input subunit, when the value of scmPrtInputUseCustomSize is set to 'On'. When scmPrtInputUseCustomSize is set to 'On', this value is copied to prtInputMediaDimFeedDirDeclared and prtInputMediaDimFeedDirChosen." REFERENCE " See: scmPrtInputUseCustomSize See: scmPrtInputCustDimFeedDirDecl" DEFVAL { 0 } ::= { scmPrtInputEntry 5 } -- unspecified device priority -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.6 scmPrtInputTrayPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The current priority of this tray. This value/mechanism is independent of scmPrtNextPrtInputIndex and scmPrtInputAliasGroup. Usage: The priority of this device, where '0' is unspecified (default), '1' is lowest, and '100' is highest." REFERENCE " See: scmPrtNextPrtInputIndex See: scmPrtInputAliasGroup" DEFVAL { 0 } ::= { scmPrtInputEntry 6 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.7 scmPrtInputPaperSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " Value of Paper size for printing. Some printer such like ML6060 or Modena have a 4 bytes data length. So, to distinguish these models we have to check model id or version." ::= { scmPrtInputEntry 7 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.8 scmPrtInputPaperSizeOptions OBJECT-TYPE SYNTAX INTEGER { letter(1), legal(2), a4(4), executive(8), jisB5(16), isoB5(32), com10(64), monarch(128), dl(256), c5(512), postA6(1024), c6(2048), folio(4096), a5(8192), statement(16384), a6(32768), ledger(65536), a3(131072), jisB4(262144), jpost(524288), jpostd(1048576), custom(2097152), letterP(4194304), a4P(8388608), jisB5P(16777216), a5P(33554432), executiveP(67108864), statementP(134217728), a3Over(268435456), b5Envelope(536870912) } MAX-ACCESS read-only STATUS current DESCRIPTION " Paper size options that are available in this model. Some printer such like ML6060 or Modena have a 4 bytes data length. So, to distinguish these models we have to check model id or version. " ::= { scmPrtInputEntry 8 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.9 scmPrtInputTrayNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " It can select the type of paper tray. The types of tray can be varied according to the printer model" ::= { scmPrtInputEntry 9 } -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.8.2.1.10 scmPrtInputTrayNumOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " available options of tray types" ::= { scmPrtInputEntry 10 } -- 1.3.6.1.4.1.236.11.5.11.55.9 -- 1.3.6.1.4.1.236.11.5.11.55.9 scmPrtOutput OBJECT IDENTIFIER ::= { scmPrintMIB 9 } -- The Printer MIB Output group extension (scmPrtOutputGroup) -- -- This group logically augments the Printer MIB's prtOutput group. -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the SCMI MIB, the agent shall also implement -- this group in order to claim SCMI conformance. -- -- 1.3.6.1.4.1.236.11.5.11.55.9.1 -- 1.3.6.1.4.1.236.11.5.11.55.9.1 scmPrtOutputTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments the prtOutputTable in the Printer MIB." ::= { scmPrtOutput 1 } -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1 scmPrtOutputEntry OBJECT-TYPE SYNTAX ScmPrtOutputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entries may exist for each entry in the prtOutputTable." AUGMENTS { prtOutputEntry } ::= { scmPrtOutputTable 1 } ScmPrtOutputEntry ::= SEQUENCE { scmPrtOutputRowStatus RowStatus, scmPrtOutputNextIndex Integer32, scmPrtOutputPassword OCTET STRING, scmPrtOutputOffsetStackingType ScmPrtOutputOffsetStackingType, scmPrtOutputTrayTimeoutSupport PresentOnOff, scmPrtOutputTrayTimeout Cardinal32, scmPrtOutputFinishier Integer32, scmPrtOutputFinishierOptions Integer32 } -- scmPrtOutputGroup -- scmPrtOutputFinishingGroup -- scmPrtOutputStaple PresentOnOff, -- scmPrtOutputStaplePosSupported ScmPrtOutputStaplePosition, -- scmPrtOutputStapleDefault PresentOnOff, -- scmPrtOutputStaplePosDefault ScmPrtOutputStaplePosition, -- scmPrtOutputPunch PresentOnOff, -- scmPrtOutputPunchDefault PresentOnOff -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.1 scmPrtOutputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the scmPrtOutputTable." ::= { scmPrtOutputEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.2 scmPrtOutputNextIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The value of prtOutputIndex corresponding to the output subunit which will be used when this output subunit is filled. A value of zero(0) indicates that auto output switching will not occur when this output subunit is filled." DEFVAL { 0 } ::= { scmPrtOutputEntry 2 } -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.3 scmPrtOutputPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION " This object is used as the password for an Output Tray, e.g. an output mailbox. It is the value that must be entered to open the output tray." REFERENCE "See: prtOutputSecurity." DEFVAL { ''h } ::= { scmPrtOutputEntry 3 } -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.4 scmPrtOutputOffsetStackingType OBJECT-TYPE SYNTAX ScmPrtOutputOffsetStackingType MAX-ACCESS read-create STATUS current DESCRIPTION " This object further refines the type of offset stacking from that specified by the object prtOutputOffsetStacking in the Printer MIB." REFERENCE " See: prtOutputOffsetStacking See: scmPrtInterpOffsetStackingType" DEFVAL { notSpecified } ::= { scmPrtOutputEntry 4 } -- not specified -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.5 scmPrtOutputTrayTimeoutSupport OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Determines whether the printer should wait before sending the printed output to another output destination when the selected or default destination is full. 'On' indicates that would should wait as specified by scmPrtOutputTrayTimeout. 'Off' indicates this feature is off and should immediately seek to send the printed output to another destination. The value 'other' shall mean not specified." REFERENCE "See: scmPrtOutputTrayTimeout" DEFVAL { other } ::= { scmPrtOutputEntry 5 } -- other or infinite -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.6 scmPrtOutputTrayTimeout OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " Determines how long the printer should wait before sending the printed output to another output destination when the selected or default destination is full. A value of (0) implies 'other' or 'infinite' which translates to this input subunit does not support this feature." DEFVAL { 0 } ::= { scmPrtOutputEntry 6 } -- The Output Finishing Group (scmPrtOutputFinishingGroup) -- -- Implementation of every object in this group is conditionally -- mandatory: if the SNMP agent implements the semantics of any of -- these objects outside of the SCMI MIB, the agent shall also implement -- this group in order to claim SCMI conformance. -- -- new scmPrtOutputFinishier -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.51 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.51 scmPrtOutputFinishier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object declares the printer output finishier." ::= { scmPrtOutputEntry 51 } -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.52 -- 1.3.6.1.4.1.236.11.5.11.55.9.1.1.52 scmPrtOutputFinishierOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " This object declares the printer output finishier option. options 1. staple 2. punch " ::= { scmPrtOutputEntry 52 } -- 1.3.6.1.4.1.236.11.5.11.55.14 -- 1.3.6.1.4.1.236.11.5.11.55.14 scmPrtChannel OBJECT IDENTIFIER ::= { scmPrintMIB 14 } -- 1.3.6.1.4.1.236.11.5.11.55.14.1 -- 1.3.6.1.4.1.236.11.5.11.55.14.1 scmPrtChannelSimple OBJECT IDENTIFIER ::= { scmPrtChannel 1 } -- table -- 1.3.6.1.4.1.236.11.5.11.55.14.2 -- 1.3.6.1.4.1.236.11.5.11.55.14.2 scmPrtChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments Printer MIB's prtChannelTable." ::= { scmPrtChannel 2 } -- 1.3.6.1.4.1.236.11.5.11.55.14.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.14.2.1 scmPrtChannelEntry OBJECT-TYPE SYNTAX ScmPrtChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists corresponding to each entry in the prtChannelTable." AUGMENTS { prtChannelEntry } ::= { scmPrtChannelTable 1 } ScmPrtChannelEntry ::= SEQUENCE { scmPrtChannelRowStatus RowStatus, scmPrtChannelEOJTimeout Cardinal32 } -- 1.3.6.1.4.1.236.11.5.11.55.14.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.14.2.1.1 scmPrtChannelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the scmPrtChannelTable." ::= { scmPrtChannelEntry 1 } -- No timeout -- 1.3.6.1.4.1.236.11.5.11.55.14.2.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.14.2.1.2 scmPrtChannelEOJTimeout OBJECT-TYPE SYNTAX Cardinal32 UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION " Defines the number of seconds that the channel waits before timing out. For example, this may be used for the parallel channel. The value zero means infinite or no timeout on the channel." DEFVAL { 0 } ::= { scmPrtChannelEntry 2 } -- 1.3.6.1.4.1.236.11.5.11.55.15 -- 1.3.6.1.4.1.236.11.5.11.55.15 scmPrtInterpreter OBJECT IDENTIFIER ::= { scmPrintMIB 15 } -- 1.3.6.1.4.1.236.11.5.11.55.15.1 -- 1.3.6.1.4.1.236.11.5.11.55.15.1 scmPrtInterpreterSimple OBJECT IDENTIFIER ::= { scmPrtInterpreter 1 } -- 1.3.6.1.4.1.236.11.5.11.55.15.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.15.1.1 scmPrtInterpreterCopyNum OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION " It can select how many papers are printed Normally it can be selected 1- 999." DEFVAL { 1 } ::= { scmPrtInterpreterSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.15.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.15.1.2 scmPrtInterpreterEmulation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Emulation option" ::= { scmPrtInterpreterSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.15.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.15.1.3 scmPrtInterpreterEmulationOptions OBJECT-TYPE SYNTAX INTEGER { auto(1), pcl5e(2), pcl4(4), wps3(8), wps6(16), ksc5843(32), kssm(64), ksc5895(128), hwp(256), pclxl(512), ps2(1024), hexDump(2048), epson(4096), ps3swrender(8192), ps3(16384), colorGDI(32768) } MAX-ACCESS read-write STATUS current DESCRIPTION " available options of the model" ::= { scmPrtInterpreterSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.15.2 -- 1.3.6.1.4.1.236.11.5.11.55.15.2 scmPrtInterpreterTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtInterpreterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table logically augments the Printer MIB's prtInterpreterTable." ::= { scmPrtInterpreter 2 } -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1 scmPrtInterpreterEntry OBJECT-TYPE SYNTAX ScmPrtInterpreterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry exists corresponding to each entry in the prtInterpreterTable." AUGMENTS { prtInterpreterEntry } ::= { scmPrtInterpreterTable 1 } ScmPrtInterpreterEntry ::= SEQUENCE { scmPrtInterpRowStatus RowStatus, scmPrtInterpJobCopiesDefault Ordinal32, scmPrtInterpLineTerm PresentOnOff, scmPrtInterpProcessBarcodes PresentOnOff, scmPrtInterpOrientation Integer32, scmPrtInterpOrientationOptions INTEGER } -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.1 scmPrtInterpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Manages the status of this conceptual row in the scmPrtInterpreterTable." ::= { scmPrtInterpreterEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.9 scmPrtInterpJobCopiesDefault OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-create STATUS current DESCRIPTION " This defines the default number of job copies to be printed by this interpreter. If set incorrectly, this object may cause difficulties at customer sites. Agent developers should consider making this object read-only, permanently set to one copy." ::= { scmPrtInterpreterEntry 9 } -- not specified -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.33 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.33 scmPrtInterpLineTerm OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Enables adding a Carriage Return after every Line Feed. The value 'On' indicates that a Carriage Return will be added after every Line Feed. Usage example: This is a useful feature when printing text jobs via PCL through a standard queue in UNIX. The value 'other' shall mean not specified." DEFVAL { other } ::= { scmPrtInterpreterEntry 33 } -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.54 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.54 scmPrtInterpProcessBarcodes OBJECT-TYPE SYNTAX PresentOnOff MAX-ACCESS read-create STATUS current DESCRIPTION " Specifies whether the 'extra' barcode processing within the interpreter should be used." DEFVAL { other } ::= { scmPrtInterpreterEntry 54 } -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.60 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.60 scmPrtInterpOrientation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " It determines the direction of the print image on the page. The first two kinds of options are portrait(tall) and landscape(wide). reversePortrait is 180 degrees rotation of portrait. reverseLandscape is 180 degrees rotation of landscape." ::= { scmPrtInterpreterEntry 60 } -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.61 -- 1.3.6.1.4.1.236.11.5.11.55.15.2.1.61 scmPrtInterpOrientationOptions OBJECT-TYPE SYNTAX INTEGER { portrait(1), landscape(2), reverseLandscape(4), reversePortrait(8) } MAX-ACCESS read-only STATUS current DESCRIPTION " available options in orientation" ::= { scmPrtInterpreterEntry 61 } -- 1.3.6.1.4.1.236.11.5.11.55.16 -- 1.3.6.1.4.1.236.11.5.11.55.16 scmPrtMediaPath OBJECT IDENTIFIER ::= { scmPrintMIB 16 } -- 1.3.6.1.4.1.236.11.5.11.55.17 -- 1.3.6.1.4.1.236.11.5.11.55.17 scmPrtMarker OBJECT IDENTIFIER ::= { scmPrintMIB 17 } -- scmPrtMarker -- -- 1.3.6.1.4.1.236.11.5.11.55.17.1 -- 1.3.6.1.4.1.236.11.5.11.55.17.1 scmPrtMarkerSimple OBJECT IDENTIFIER ::= { scmPrtMarker 1 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.1 scmPrtMarkerMarginUnit OBJECT-TYPE SYNTAX INTEGER { mm(1), inch(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtMarkerSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.2 scmPrtMarkerSrt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " It determin Samsung Resolution Technology option when it is ON." ::= { scmPrtMarkerSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.3 scmPrtMarkerSrtOptions OBJECT-TYPE SYNTAX INTEGER { enhance(1), normal(2), grayPlus(4), gray(8), res1200fast(16), res1200true(32) } MAX-ACCESS read-only STATUS current DESCRIPTION " available options of current model" ::= { scmPrtMarkerSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.4 scmPrtMarkerDensity OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "It determines the overall density of page" ::= { scmPrtMarkerSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.5 scmPrtMarkerDensityOptions OBJECT-TYPE SYNTAX INTEGER { light(1), medium(2), dark(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "available options of current model" ::= { scmPrtMarkerSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.6 scmPrtMarkerSmetMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates whether the SMET mode is currently enabled." ::= { scmPrtMarkerSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.7 scmPrtMarkerSmetModeOptions OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for smetMode in this printer." ::= { scmPrtMarkerSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.8 scmPrtMarkerduplexTopMargin OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the top margin on the backside of a page when printing in duplex mode. The actual value used in the printer is the value of this object divided by 10. The unit is inch." ::= { scmPrtMarkerSimple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.9 scmPrtMarkerduplexLeftMargin OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the left margin on the backside of a page when printing in duplex mode. The actual value used in the printer is the value of this object divided by 10. The unit is inch." ::= { scmPrtMarkerSimple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.10 scmPrtMarkerShortEdgeBindingMargin OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the margin left for binding on the short edge of the paper when printing is done in short edge duplex mode. The actual value used in the printer is the value of this object divided by 10. The unit is inch." ::= { scmPrtMarkerSimple 10 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.11 scmPrtMarkerLongEdgeBindingMargin OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the margin left for binding on the long edge of the paper when printing is done in long edge duplex mode. The actual value used in the printer is the value of this object divided by 10. The unit is inch." ::= { scmPrtMarkerSimple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.12 scmPrtMarkerTonerSave OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Echo mode option. Echo mode Off Echo mode On" ::= { scmPrtMarkerSimple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.13 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.13 scmPrtMarkerTonerSaveOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " available options of the model" ::= { scmPrtMarkerSimple 13 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.14 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.14 scmPrtMarkerTonerOutAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The value of this object gives the action taken by the printer when the tonerLow condition occurs. If the value is continue(1), the printer continues to print in spite of the toner being low. If the value is stop(2), the printer stops printing when the toner is low." ::= { scmPrtMarkerSimple 14 } -- 1.3.6.1.4.1.236.11.5.11.55.17.1.15 -- 1.3.6.1.4.1.236.11.5.11.55.17.1.15 scmPrtMarkerTonerOutActionOptions OBJECT-TYPE SYNTAX INTEGER { continue(1), stop(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " The value of this object will be the bitwise OR of the supported values for tonerLowAction in this printer." ::= { scmPrtMarkerSimple 15 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2 -- 1.3.6.1.4.1.236.11.5.11.55.17.2 scmPrtMarkerTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtMarkerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtMarker 2 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1 scmPrtMarkerEntry OBJECT-TYPE SYNTAX ScmPrtMarkerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Entries may exist in the table for each device index who's device type is printer" INDEX { hrDeviceIndex, scmPrtMarkerTonerIndex } ::= { scmPrtMarkerTable 1 } ScmPrtMarkerEntry ::= SEQUENCE { scmPrtMarkerTonerIndex Ordinal32, scmPrtMarkerResolution Integer32, scmPrtMarkerResolutionOptions INTEGER, scmPrtMarkerTonerColor Integer32, scmPrtMarkerTonerColorDescription OCTET STRING, scmPrtMarkerTonerLevel Integer32 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.1 scmPrtMarkerTonerIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-only STATUS current DESCRIPTION "Index of the Toner number" ::= { scmPrtMarkerEntry 1 } -- scmPrtMarkerGroup -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.2 scmPrtMarkerResolution OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The value of this object gives the current resolution used while printing. The value res300(1) means 300X300 dpi resolution. The value res600(2) means 600X600 dpi resolution. The value res1200(4) means 1200X1200 dpi resolution." ::= { scmPrtMarkerEntry 2 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.3 scmPrtMarkerResolutionOptions OBJECT-TYPE SYNTAX INTEGER { res300(1), res600(2), res1200(4), res1200fast(8), res1200best(16) } MAX-ACCESS read-only STATUS current DESCRIPTION " The value of this object will be the bitwise OR of all the supported values for resolution in this printer." ::= { scmPrtMarkerEntry 3 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.4 scmPrtMarkerTonerColor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "color of Toner" ::= { scmPrtMarkerEntry 4 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.5 scmPrtMarkerTonerColorDescription OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Description of Toner" ::= { scmPrtMarkerEntry 5 } -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.17.2.1.6 scmPrtMarkerTonerLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indication of Toner remainder" ::= { scmPrtMarkerEntry 6 } -- 1.3.6.1.4.1.236.11.5.11.55.18 -- 1.3.6.1.4.1.236.11.5.11.55.18 scmPrtOperation OBJECT IDENTIFIER ::= { scmPrintMIB 18 } -- scmPrtOperation -- -- 1.3.6.1.4.1.236.11.5.11.55.18.1 -- 1.3.6.1.4.1.236.11.5.11.55.18.1 scmPrtOperationSimple OBJECT IDENTIFIER ::= { scmPrtOperation 1 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.1 scmPrtOperationJobCancel OBJECT-TYPE SYNTAX INTEGER { cancelJob(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Printer Operation Job Cancel Request" ::= { scmPrtOperationSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.2 scmPrtOperarionMenuClear OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the value of this object is set to clearMenus(1), the values of all the printer properties in all the menus will be set to default values." ::= { scmPrtOperationSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.3 scmPrtOperationMenuClearOptions OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for menuClear in this printer." ::= { scmPrtOperationSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.4 scmPrtOperationFuserClean OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the value of this object is set to fuserClean(2),the printer fuser will be clear" ::= { scmPrtOperationSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.5 scmPrtOperationFuserCleanOptions OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for nfuserClean in this printer." ::= { scmPrtOperationSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.6 scmPrtOperationOpcClean OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the value of this object is set to opcClean(2),the printer OPC will be clear" ::= { scmPrtOperationSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.7 scmPrtOperationOpcCleanOptions OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for nopcClean in this printer." ::= { scmPrtOperationSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.8 scmPrtOperationTestPrtRequest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " request test printing 1: request " ::= { scmPrtOperationSimple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.9 scmPrtOperationPrintFontRequest OBJECT-TYPE SYNTAX INTEGER { pcl(1), ps(2), ks5843(3), kssm(4), ks5895(5), epson(6), opcClean(7), fuserClean(8), configpage(9), demopage(10), menuMap(11), psFlashDirectory(12) } MAX-ACCESS read-write STATUS current DESCRIPTION " request test printing 1: pcl request 2: ps request 3: ks5843 request 4: kssm request 5: ks5895 request 6: epson requese, 7: opcClean request, 8: fuserClean request, 9: configpage request, 10: kssm request, 11: menuMap request, 12: psFlashDirectory requese, " ::= { scmPrtOperationSimple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.18.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.18.1.10 scmPrtOperationPrintBlackOnly OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { scmPrtOperationSimple 10 } -- table -- -- 1.3.6.1.4.1.236.11.5.11.55.18.2 -- 1.3.6.1.4.1.236.11.5.11.55.18.2 scmPrtOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtOperation 2 } -- 1.3.6.1.4.1.236.11.5.11.55.18.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.18.2.1 scmPrtOperationEntry OBJECT-TYPE SYNTAX ScmPrtOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { scmPrtOperationIndex, hrDeviceIndex } ::= { scmPrtOperationTable 1 } ScmPrtOperationEntry ::= SEQUENCE { scmPrtOperationIndex Ordinal32 } -- scmPrtOperationGroup -- 1.3.6.1.4.1.236.11.5.11.55.18.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.18.2.1.1 scmPrtOperationIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtOperationEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.19 -- 1.3.6.1.4.1.236.11.5.11.55.19 scmPrtConfiguration OBJECT IDENTIFIER ::= { scmPrintMIB 19 } -- scmPrtConfiguration -- -- 1.3.6.1.4.1.236.11.5.11.55.19.1 -- 1.3.6.1.4.1.236.11.5.11.55.19.1 scmPrtConfigurationSimple OBJECT IDENTIFIER ::= { scmPrtConfiguration 1 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.1 scmPrtConfigurationPowerSave OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " set power save mode 1: power save mode" ::= { scmPrtConfigurationSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.2 scmPrtConfigurationPowerSaveOptions OBJECT-TYPE SYNTAX INTEGER { pwSaveoff(1), pwSave15(2), pwSave30(4), pwSave45(8), pwSave60(16) } MAX-ACCESS read-only STATUS current DESCRIPTION " available options of the model" ::= { scmPrtConfigurationSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.3 scmPrtConfigurationAutocont OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It determines the printer action when the user prints a page without paper in the manual feed slot but the paper source is set to manual feed. If Auto Continue is ON the printer pick up the paper from the tray after few second. If it is OFF the printer wait forever until user insert paper into a manual feed slot." ::= { scmPrtConfigurationSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.4 scmPrtConfigurationAutoCountOptions OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " available options of the model" ::= { scmPrtConfigurationSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.5 scmPrtConfigurationJam2Recover OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "if it is on and occur JAM at Jam2 point printer will print this page again." ::= { scmPrtConfigurationSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.6 scmPrtConfigurationJam2RecOptions OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " available options of the model" ::= { scmPrtConfigurationSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.7 scmPrtConfigurationAltitudeAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value 'low(1)' will be used when the printer is in the low altitude location. The value 'high(2)' will be used when the printer is in the high altitude location. " ::= { scmPrtConfigurationSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.19.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.19.1.8 scmPrtConfigurationAltitudeActionOptions OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for altitudeAction in this printer." ::= { scmPrtConfigurationSimple 8 } -- table -- 1.3.6.1.4.1.236.11.5.11.55.19.2 -- 1.3.6.1.4.1.236.11.5.11.55.19.2 scmPrtConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtConfiguration 2 } -- 1.3.6.1.4.1.236.11.5.11.55.19.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.19.2.1 scmPrtConfigurationEntry OBJECT-TYPE SYNTAX ScmPrtConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { scmPrtConfigurationIndex, hrDeviceIndex } ::= { scmPrtConfigurationTable 1 } ScmPrtConfigurationEntry ::= SEQUENCE { scmPrtConfigurationIndex Ordinal32 } -- scmPrtConfigurationGroup -- 1.3.6.1.4.1.236.11.5.11.55.19.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.19.2.1.1 scmPrtConfigurationIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtConfigurationEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.20 -- 1.3.6.1.4.1.236.11.5.11.55.20 scmPrtCount OBJECT IDENTIFIER ::= { scmPrintMIB 20 } -- scmPrtCount -- -- 1.3.6.1.4.1.236.11.5.11.55.20.1 -- 1.3.6.1.4.1.236.11.5.11.55.20.1 scmPrtCountSimple OBJECT IDENTIFIER ::= { scmPrtCount 1 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.1 scmPrtCountDrumImageCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.2 scmPrtCountDrumImageCountReset OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.3 scmPrtCountTransferImageCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.4 scmPrtCountTransferImageCountReset OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.5 scmPrtCountFuserImageCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.6 scmPrtCountFuserImageCountReset OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.7 scmPrtCountTwoRollerCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.8 scmPrtCountTwoRollerReset OBJECT-TYPE SYNTAX INTEGER { on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.9 scmPrtCountPickupMPCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.10 scmPrtCountPickupMPReset OBJECT-TYPE SYNTAX INTEGER { on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 10 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.11 scmPrtCountPickupTray1Count OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.12 scmPrtCountPickupTray1Reset OBJECT-TYPE SYNTAX INTEGER { on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.13 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.13 scmPrtCountPickupTray2Count OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 13 } -- 1.3.6.1.4.1.236.11.5.11.55.20.1.14 -- 1.3.6.1.4.1.236.11.5.11.55.20.1.14 scmPrtCountPickupTray2Reset OBJECT-TYPE SYNTAX INTEGER { on(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtCountSimple 14 } -- table -- 1.3.6.1.4.1.236.11.5.11.55.20.2 -- 1.3.6.1.4.1.236.11.5.11.55.20.2 scmPrtCountTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtCount 2 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1 scmPrtCountEntry OBJECT-TYPE SYNTAX ScmPrtCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { scmPrtCountIndex } ::= { scmPrtCountTable 1 } ScmPrtCountEntry ::= SEQUENCE { scmPrtCountIndex Integer32, scmPrtCountDeviceType INTEGER, scmPrtCountType INTEGER, scmPrtCountMediaSize INTEGER, scmPrtCountColorant INTEGER, scmPrtCountDuplex INTEGER, scmPrtCountResolution INTEGER, scmPrtCountUnit INTEGER, scmPrtCountValue Integer32 } -- scmPrtCountGroup -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.1 scmPrtCountIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtCountEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.2 scmPrtCountDeviceType OBJECT-TYPE SYNTAX INTEGER { printer(1), scanner(2), copier(3), fax(4), mailbox(5), finisher(6), feeder(7), sorter(8), marker(9), basicFunctionFinisher(10), multiFunctionFinisher(11), externalIFFinisher(12), thirdPartyFinisher(13), payment(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 2 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.3 scmPrtCountType OBJECT-TYPE SYNTAX INTEGER { other(1), unknown(2), copy(3), faxIn(4), faxout(5), digitalSend(6), digitalReceive(7), scan(8), print(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 3 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.4 scmPrtCountMediaSize OBJECT-TYPE SYNTAX INTEGER { unknown(1), letter(2), legal(3), a4(4), executive(5), jisB5(6), isoB5(7), com10(8), monarch(9), dl(10), c5(11), postA6(12), c6(13), folio(14), a5(15), statement(16), a6(17), ledger(18), a3(19), jisB4(20), jpost(21), jpostd(22), custom(23), letterP(24), a4P(25), jisB5P(26), a5P(27), executiveP(28), statementP(29), a3Over(30), b5Envelope(31) } MAX-ACCESS read-only STATUS current DESCRIPTION " Paper size options that are available in this model. Some printer such like ML6060 or Modena have a 4 bytes data length. So, to distinguish these models we have to check model id or version. " ::= { scmPrtCountEntry 4 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.5 scmPrtCountColorant OBJECT-TYPE SYNTAX INTEGER { mono(1), color(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 5 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.6 scmPrtCountDuplex OBJECT-TYPE SYNTAX INTEGER { simplex(1), duplex(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 6 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.7 scmPrtCountResolution OBJECT-TYPE SYNTAX INTEGER { low300dpi(1), normal600dpi(2), high1200dpi(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 7 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.8 scmPrtCountUnit OBJECT-TYPE SYNTAX INTEGER { tenThousandthsOfInches(3), micrometers(4), characters(5), lines(6), impressions(7), sheets(8), dotRow(9), hours(11), feet(16), meters(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 8 } -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.20.2.1.9 scmPrtCountValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Description." ::= { scmPrtCountEntry 9 } -- 1.3.6.1.4.1.236.11.5.11.55.21 -- 1.3.6.1.4.1.236.11.5.11.55.21 scmPrtSerial OBJECT IDENTIFIER ::= { scmPrintMIB 21 } -- scmPrtSerial -- -- 1.3.6.1.4.1.236.11.5.11.55.21.1 -- 1.3.6.1.4.1.236.11.5.11.55.21.1 scmPrtSerialSimple OBJECT IDENTIFIER ::= { scmPrtSerial 1 } -- table -- 1.3.6.1.4.1.236.11.5.11.55.21.2 -- 1.3.6.1.4.1.236.11.5.11.55.21.2 scmPrtSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtSerial 2 } -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1 scmPrtSerialEntry OBJECT-TYPE SYNTAX ScmPrtSerialEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { scmPrtSerialIndex } ::= { scmPrtSerialTable 1 } ScmPrtSerialEntry ::= SEQUENCE { scmPrtSerialIndex Ordinal32, scmPrtSerialNbaudRate Integer32, scmPrtSerialBrOptions Integer32, scmPrtSerialBobuxon INTEGER, scmPrtSerialBobuxonOptions Integer32 } -- scmPrtSerialGroup -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.1 scmPrtSerialIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtSerialEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.2 scmPrtSerialNbaudRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "the speed when user use a serial port" ::= { scmPrtSerialEntry 2 } -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.3 scmPrtSerialBrOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "available options of printer " ::= { scmPrtSerialEntry 3 } -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.4 scmPrtSerialBobuxon OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtSerialEntry 4 } -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.21.2.1.5 scmPrtSerialBobuxonOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for robuxon in this printer." ::= { scmPrtSerialEntry 5 } -- 1.3.6.1.4.1.236.11.5.11.55.22 -- 1.3.6.1.4.1.236.11.5.11.55.22 scmPrtPCL OBJECT IDENTIFIER ::= { scmPrintMIB 22 } -- scmPrtPCL -- -- 1.3.6.1.4.1.236.11.5.11.55.22.1 -- 1.3.6.1.4.1.236.11.5.11.55.22.1 scmPrtPCLSimple OBJECT IDENTIFIER ::= { scmPrtPCL 1 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.1 scmPrtPCLFont OBJECT-TYPE SYNTAX INTEGER (0..53) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.2 scmPrtPCLSymbolSet OBJECT-TYPE SYNTAX INTEGER (0..37) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.3 scmPrtPCLFormLine OBJECT-TYPE SYNTAX INTEGER (5..128) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.4 scmPrtPCLPitch OBJECT-TYPE SYNTAX INTEGER (16..399) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.5 scmPrtPCLPointSize OBJECT-TYPE SYNTAX INTEGER (16..399) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.6 scmPrtPCLCourier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.7 scmPrtPCLCourierOptions OBJECT-TYPE SYNTAX INTEGER { regular(1), dark(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.8 scmPrtPCLAppendCR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.9 scmPrtPCLAppendCROptions OBJECT-TYPE SYNTAX INTEGER { lf(1), lfCR(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.10 scmPrtPCLWideA4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 10 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.11 scmPrtPCLWideA4Options OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtPCLSimple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.12 scmPrtPCLTopMargin OBJECT-TYPE SYNTAX INTEGER (0..250) MAX-ACCESS read-write STATUS current DESCRIPTION " Margine between top and first line of this page ,actuall value of printing is a value divided by 10. basic unit is inch. If Orientation is portrait or reverse portrait, then the range of topMargine is 0 to 99 and if Orientation is landscape or reverse landscape, then range is 0 to 170" ::= { scmPrtPCLSimple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.22.1.13 -- 1.3.6.1.4.1.236.11.5.11.55.22.1.13 scmPrtPCLLeftMargin OBJECT-TYPE SYNTAX INTEGER (0..250) MAX-ACCESS read-write STATUS current DESCRIPTION " Left margine of printed page, actual value is a value divided by 10. Basic unit is inch. If Orentation is landscape or reverse landscape, the range is 0 to 99 and if the Orientation is portrait or reverse portrait, the range is 0 to 170." ::= { scmPrtPCLSimple 13 } -- table -- 1.3.6.1.4.1.236.11.5.11.55.22.2 -- 1.3.6.1.4.1.236.11.5.11.55.22.2 scmPrtPCLTable OBJECT-TYPE SYNTAX SEQUENCE OF ScmPrtPCLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { scmPrtPCL 2 } -- 1.3.6.1.4.1.236.11.5.11.55.22.2.1 -- 1.3.6.1.4.1.236.11.5.11.55.22.2.1 scmPrtPCLEntry OBJECT-TYPE SYNTAX ScmPrtPCLEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { scmPrtPCLIndex } ::= { scmPrtPCLTable 1 } ScmPrtPCLEntry ::= SEQUENCE { scmPrtPCLIndex Ordinal32 } -- scmPrtPCLGroup -- 1.3.6.1.4.1.236.11.5.11.55.22.2.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.22.2.1.1 scmPrtPCLIndex OBJECT-TYPE SYNTAX Ordinal32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtPCLEntry 1 } -- 1.3.6.1.4.1.236.11.5.11.55.23 -- 1.3.6.1.4.1.236.11.5.11.55.23 scmPrtKS5843 OBJECT IDENTIFIER ::= { scmPrintMIB 23 } -- scmPrtKS5843 -- -- 1.3.6.1.4.1.236.11.5.11.55.23.1 -- 1.3.6.1.4.1.236.11.5.11.55.23.1 scmPrtKS5843Simple OBJECT IDENTIFIER ::= { scmPrtKS5843 1 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.1 scmPrtKS5843Font OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.2 scmPrtKS5843FontOptions OBJECT-TYPE SYNTAX INTEGER { myoungjo(1), gothic(2), gungseo(4), gullim(8), sammool(16), yetche(32), post(64), newgraph(128), sunmyun(256), pilgi(512), headline(1024), ocrB1(2048) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.3 scmPrtKS5843Code OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.4 scmPrtKS5843CodeOptions OBJECT-TYPE SYNTAX INTEGER { wansung(1), johap(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.5 scmPrtKS5843cpi OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.6 scmPrtKS5843cpiOptions OBJECT-TYPE SYNTAX INTEGER { kscpi10(1), kscpi12(2), kscpi133(4), kscpi15(8), kscpi20(16), kscpi24(32), kscpi267(64), kscpi30(128) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.7 scmPrtKS5843Lines OBJECT-TYPE SYNTAX INTEGER (5..10) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.8 scmPrtKS5843Zoom OBJECT-TYPE SYNTAX INTEGER (50..200) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.9 scmPrtKS5843AutoWrap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.10 scmPrtKS5843AutoWrapOptions OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 10 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.11 scmPrtKS5843Topmargin OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKS5843Simple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.23.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.23.1.12 scmPrtKS5843Sitemode OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION "Each site special Mode except ksc5843 standard" ::= { scmPrtKS5843Simple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.24 -- 1.3.6.1.4.1.236.11.5.11.55.24 scmPrtKSSM OBJECT IDENTIFIER ::= { scmPrintMIB 24 } -- scmPrtKSSM -- -- 1.3.6.1.4.1.236.11.5.11.55.24.1 -- 1.3.6.1.4.1.236.11.5.11.55.24.1 scmPrtKSSMSimple OBJECT IDENTIFIER ::= { scmPrtKSSM 1 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.1 scmPrtKSSMFont OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.2 scmPrtKSSMFontOptions OBJECT-TYPE SYNTAX INTEGER { myoungjo(1), gothic(2), gungseo(4), gullim(8), sammool(16), yetche(32), post(64), newgraph(128), sunmyun(256), pilgi(512), headline(1024), ocrB1(2048) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.3 scmPrtKSSMCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.4 scmPrtKSSMCodeOptions OBJECT-TYPE SYNTAX INTEGER { wansung(1), johap(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.5 scmPrtKSSMCPI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.6 scmPrtKSSMCPIOptions OBJECT-TYPE SYNTAX INTEGER { kscpi10(1), kscpi12(2), kscpi133(4), kscpi15(8), kscpi20(16), kscpi24(32), kscpi267(64), kscpi30(128) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.7 scmPrtKSSMLines OBJECT-TYPE SYNTAX INTEGER (5..10) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.8 scmPrtKSSMZoom OBJECT-TYPE SYNTAX INTEGER (50..200) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.9 scmPrtKSSMAutoWrap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.10 scmPrtKSSMAutoWrapOptions OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 10 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.11 scmPrtKSSMTopMargin OBJECT-TYPE SYNTAX INTEGER (0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.24.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.24.1.12 scmPrtKSSMSiteMode OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { scmPrtKSSMSimple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.25 -- 1.3.6.1.4.1.236.11.5.11.55.25 scmPrtIPP OBJECT IDENTIFIER ::= { scmPrintMIB 25 } -- scmPrtIPP -- -- 1.3.6.1.4.1.236.11.5.11.55.25.1 -- 1.3.6.1.4.1.236.11.5.11.55.25.1 scmPrtIPPSimple OBJECT IDENTIFIER ::= { scmPrtIPP 1 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.1 scmPrtIPPColorSupported OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object indicates whether the printer supports color printing." ::= { scmPrtIPPSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.2 scmPrtIPPJobKOctetsSupportedLBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the lower bound of the size in units of 1024 octets for jobs accepted by the printer." ::= { scmPrtIPPSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.3 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.3 scmPrtIPPJobKOctetsSupportedUBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the upper bound of the size in units of 1024 octets for jobs accepted by the printer." ::= { scmPrtIPPSimple 3 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.4 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.4 scmPrtIPPJobImpressionsSupportedLBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the lower bound of the number of print images for a job." ::= { scmPrtIPPSimple 4 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.5 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.5 scmPrtIPPJobImpressionsSupportedUBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the upper bound of the number of print images for a job." ::= { scmPrtIPPSimple 5 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.6 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.6 scmPrtIPPJobMediaSheetsSupportedLBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the lower bound of the number of pages printed for a job." ::= { scmPrtIPPSimple 6 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.7 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.7 scmPrtIPPJobMediaSheetsSupportedUBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the upper bound of the number of pages printed for a job." ::= { scmPrtIPPSimple 7 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.8 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.8 scmPrtIPPJobSheets OBJECT-TYPE SYNTAX INTEGER { standard(1), none(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object specifies the type of job start/end sheets printed with every IPP job. If the value is standard(1), the printer specific standard job start/end sheets will be printed for each job." ::= { scmPrtIPPSimple 8 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.9 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.9 scmPrtIPPCollatedCopiesLBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the lower bound of the number of collated copies supported in this printer." ::= { scmPrtIPPSimple 9 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.10 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.10 scmPrtIPPCollatedCopiesUBound OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the upper bound of the number of collated copies supported in this printer." ::= { scmPrtIPPSimple 10 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.11 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.11 scmPrtIPPCollatedCopies OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object gives the number of collated copies printed for the each job." ::= { scmPrtIPPSimple 11 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.12 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.12 scmPrtIPPFinishingsSupported OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the type of finishings supported in the printer. If bit 1 is set, stapling is supported. If bit 2 is set, punching is supported. If bit 3 is set, covering of printed document is supported. If bit 4 is set, binding is supported. If bit 0 is set, the option of no finishings is supported." ::= { scmPrtIPPSimple 12 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.13 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.13 scmPrtIPPFinishings OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object gives the set of finishings applied for each job. If bit 0 is set, no finishings are applied. If bit 1 is set, stapling is done for each job. If bit 2 is set, punching is done for each job. If bit 3 is set, the printed document will be covered. If bit 4 is set, binding will be done for each job." ::= { scmPrtIPPSimple 13 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.14 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.14 scmPrtIPPPageRangesSupported OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object indicates whether printing only a range of pages for IPP jobs is supported. If the value is on(1), printing only specified page ranges of the given IPP job is supported." ::= { scmPrtIPPSimple 14 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.15 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.15 scmPrtIPPNumberUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object indicates the number of print images imposed on one side of a page." ::= { scmPrtIPPSimple 15 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.16 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.16 scmPrtIPPNumberUpOptions OBJECT-TYPE SYNTAX INTEGER { numberUp1(1), numberUp2(2), numberUp4(4), numberUp6(8), numberUp9(16), numberUp16(32) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for numberUp in this printer." ::= { scmPrtIPPSimple 16 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.17 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.17 scmPrtIPPPrintQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The value of this object indicates the print quality that the printer uses for a print job. The value draft(1) means lowest quality available on the printer. Tha value normal(2) means normal or intermediate quality on the printer. The value high(4) means highest quality available on the printer." ::= { scmPrtIPPSimple 17 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.18 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.18 scmPrtIPPPrintQualityOptions OBJECT-TYPE SYNTAX INTEGER { draft(1), normal(2), high(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object will be the bitwise OR of the supported values for printQuality in this printer." ::= { scmPrtIPPSimple 18 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.19 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.19 scmPrtIPPJobKOctetsProcessed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the number of units of 1024 octets printed for the current job." ::= { scmPrtIPPSimple 19 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.20 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.20 scmPrtIPPJobImpressionsCompleted OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the number of print images printed for the current job." ::= { scmPrtIPPSimple 20 } -- 1.3.6.1.4.1.236.11.5.11.55.25.1.21 -- 1.3.6.1.4.1.236.11.5.11.55.25.1.21 scmPrtIPPJobMediaSheetsCompleted OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of this object gives the number of pages printed for the current job." ::= { scmPrtIPPSimple 21 } -- 1.3.6.1.4.1.236.11.5.11.55.26 -- 1.3.6.1.4.1.236.11.5.11.55.26 scmPrtAlert OBJECT IDENTIFIER ::= { scmPrintMIB 26 } -- scmPrtAlert -- -- 1.3.6.1.4.1.236.11.5.11.55.26.1 -- 1.3.6.1.4.1.236.11.5.11.55.26.1 scmPrtAlertSimple OBJECT IDENTIFIER ::= { scmPrtAlert 1 } -- 1.3.6.1.4.1.236.11.5.11.55.26.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.26.1.1 scmPrtAlertAlarmShortage OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Printer Alert Alarm Shortage" ::= { scmPrtAlertSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.26.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.26.1.2 scmPrtAlertAlarmShortageOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Printer Alert Shortage Oprions" ::= { scmPrtAlertSimple 2 } -- 1.3.6.1.4.1.236.11.5.11.55.27 -- 1.3.6.1.4.1.236.11.5.11.55.27 scmPrtConsoleDisplayBuffer OBJECT IDENTIFIER ::= { scmPrintMIB 27 } -- scmPrtConsoleDisplayBuffer -- -- 1.3.6.1.4.1.236.11.5.11.55.27.1 -- 1.3.6.1.4.1.236.11.5.11.55.27.1 scmPrtConsoleDisplayBufferSimple OBJECT IDENTIFIER ::= { scmPrtConsoleDisplayBuffer 1 } -- 1.3.6.1.4.1.236.11.5.11.55.27.1.1 -- 1.3.6.1.4.1.236.11.5.11.55.27.1.1 scmPrtConsoleDisplayBufferLcdLangType OBJECT-TYPE SYNTAX INTEGER { english(1), german(2), french(4), italian(8), spanish(16) } MAX-ACCESS read-write STATUS current DESCRIPTION "Printer Console (LCD) Display String Language Type" ::= { scmPrtConsoleDisplayBufferSimple 1 } -- 1.3.6.1.4.1.236.11.5.11.55.27.1.2 -- 1.3.6.1.4.1.236.11.5.11.55.27.1.2 scmPrtConsoleDisplayBufferLcdLangTypeOptions OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Printer Console (LCD) Display String Language Type Option" ::= { scmPrtConsoleDisplayBufferSimple 2 } END -- -- SamsungPrint.mib --