-- ***************************************************************** -- MY-ENTITY-MIB.mib: My Entity MIB file -- -- March 2002, Wuzg -- -- Copyright (c) 2002 by My Networks Co.,Ltd. -- All rights reserved. -- -- ***************************************************************** -- MY-ENTITY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Counter32 FROM SNMPv2-SMI TruthValue, DisplayString, RowStatus, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF myMgmt FROM MY-SMI; myEntityMIB MODULE-IDENTITY LAST-UPDATED "200203200000Z" ORGANIZATION "My Networks Co.,Ltd." CONTACT-INFO " Tel: 0591-83057888 E-mail: service@star-net.cn" DESCRIPTION "This module defines my entity mibs." REVISION "200203200000Z" DESCRIPTION "Initial version of this MIB module." ::= { myMgmt 21} myDeviceMIBObjects OBJECT IDENTIFIER ::= { myEntityMIB 1 } -- -- device information -- myDeviceMaxNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of devices of the system permitting." ::= { myDeviceMIBObjects 1 } myDeviceInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MyDeviceInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of devices." ::= { myDeviceMIBObjects 2 } myDeviceInfoEntry OBJECT-TYPE SYNTAX MyDeviceInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of a device information." INDEX { myDeviceInfoIndex } ::= { myDeviceInfoTable 1 } MyDeviceInfoEntry ::= SEQUENCE { myDeviceInfoIndex Integer32, myDeviceInfoDescr DisplayString, myDeviceInfoSlotNumber Integer32, myDevicePowerStatus INTEGER, myDeviceMacAddress MacAddress, myDevicePriority Integer32, myDeviceAlias DisplayString, myDeviceSWVersion DisplayString, myDeviceHWVersion DisplayString } myDeviceInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An unique value of each devices in system. Its value ranges between 1 and the value of the object myDeviceNumber." ::= { myDeviceInfoEntry 1 } myDeviceInfoDescr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the device." ::= { myDeviceInfoEntry 2 } myDeviceInfoSlotNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of slots exists on the device." ::= { myDeviceInfoEntry 3 } myDevicePowerStatus OBJECT-TYPE SYNTAX INTEGER { rpsNoLink (1), -- no rps link or rps not electrifying, rpsLinkAndNoPower (2), -- rps linked but not electrifying, rpsLinkAndReadyForPower (3), -- rps is ready for power, rpsLinkAndPower (4) -- rps is serving as a power } MAX-ACCESS read-only STATUS current DESCRIPTION "The power status of device" ::= { myDeviceInfoEntry 4 } myDeviceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The physical address of device" ::= { myDeviceInfoEntry 5 } myDevicePriority OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "The device priority value" ::= { myDeviceInfoEntry 6 } myDeviceAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Alias of the device." ::= { myDeviceInfoEntry 7 } myDeviceSWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the device." ::= { myDeviceInfoEntry 8 } myDeviceHWVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the device." ::= { myDeviceInfoEntry 9 } -- -- module information -- --myModuleNumber OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current number of modules in the system." -- ::= { myDeviceMIBObjects 2 } mySlotInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF MySlotInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "a list of module Entries." ::= { myDeviceMIBObjects 3 } mySlotInfoEntry OBJECT-TYPE SYNTAX MySlotInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing status information about one slot." INDEX { mySlotInfoDeviceIndex, mySlotInfoIndex } ::= { mySlotInfoTable 1 } MySlotInfoEntry ::= SEQUENCE { mySlotInfoDeviceIndex Integer32, mySlotInfoIndex Integer32, mySlotModuleInfoDescr DisplayString, mySlotInfoPortNumber Integer32, mySlotInfoPortMaxNumber Integer32, mySlotInfoDesc DisplayString } mySlotInfoDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the device, that the slot exists on." ::= { mySlotInfoEntry 1 } mySlotInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each slot exist on the device specified by the field mySlotInfoDeviceIndex, Its value ranges between 1 and the value of the solt num of this device." ::= { mySlotInfoEntry 2 } mySlotModuleInfoDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Descriptions for the module in the Slot. just like 's1902m' etc. It is a unique value for identifing a kind of module.This value will be null string if slot is empty is NULL" ::= { mySlotInfoEntry 3 } mySlotInfoPortNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ports on this slot.This value will be 0 if slot is empty" ::= { mySlotInfoEntry 4 } mySlotInfoPortMaxNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of ports on this slot has possibly." ::= { mySlotInfoEntry 5 } mySlotInfoDesc OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the slot,the same as the pannel show." ::= { mySlotInfoEntry 6 } -- --ModuleTempState -- myModuleTempStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MyModuleTempStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "模块温度状态入口表." ::= { myDeviceMIBObjects 4 } myModuleTempStateEntry OBJECT-TYPE SYNTAX MyModuleTempStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "模块温度状态入口." INDEX { myModuleTempStateDeviceIndex, myModuleTempStateIndex } ::= { myModuleTempStateTable 1 } MyModuleTempStateEntry ::= SEQUENCE { myModuleTempStateDeviceIndex Integer32, myModuleTempStateIndex Integer32, myModuleTempState INTEGER } myModuleTempStateDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "模块所在设备的设备索引号." ::= { myModuleTempStateEntry 1 } myModuleTempStateIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 设备上模块的索引号, 它的取值范围是从1到设备的最大插槽(slot)数." ::= { myModuleTempStateEntry 2 } myModuleTempState OBJECT-TYPE SYNTAX INTEGER{ tempNormal(1), tempWarning(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 模块的温度状态" ::= { myModuleTempStateEntry 3 } myPowerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MyPowerStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "电源工作状态入口表." ::= { myDeviceMIBObjects 5 } myPowerStateEntry OBJECT-TYPE SYNTAX MyPowerStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "电源工作状态入口." INDEX { myPowerStateDeviceIndex, myPowerStateIndex } ::= { myPowerStateTable 1 } MyPowerStateEntry ::= SEQUENCE { myPowerStateDeviceIndex Integer32, myPowerStateIndex Integer32, myPowerState INTEGER } myPowerStateDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "电源所在设备的设备号索引." ::= { myPowerStateEntry 1 } myPowerStateIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "设备上的电源号索引." ::= { myPowerStateEntry 2 } myPowerState OBJECT-TYPE SYNTAX INTEGER{ noLink(1), --no exist linkAndNoPower(2), --exist but no power linkAndReadyForPower(3), --exist and ready for power linkAndPower(4), --normal power linkAndPowerAbnormal(5) --power,but abnormal at fan } MAX-ACCESS read-only STATUS current DESCRIPTION "电源工作状态" ::= { myPowerStateEntry 3 } myFanStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MyFanStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "风扇状态入口表." ::= { myDeviceMIBObjects 6 } myFanStateEntry OBJECT-TYPE SYNTAX MyFanStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "风扇状态入口." INDEX { myFanStateDeviceIndex, myFanStateIndex } ::= { myFanStateTable 1 } MyFanStateEntry ::= SEQUENCE { myFanStateDeviceIndex Integer32, myFanStateIndex Integer32, myFanState INTEGER } myFanStateDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "风扇所在设备的设备索引号." ::= { myFanStateEntry 1 } myFanStateIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "设备上的风扇索引号." ::= { myFanStateEntry 2 } myFanState OBJECT-TYPE SYNTAX INTEGER{ work(1), --fan working stop(2) --fan stopping or no exist } MAX-ACCESS read-only STATUS current DESCRIPTION "风扇工作状态" ::= { myFanStateEntry 3 } myEntityMIBTraps OBJECT IDENTIFIER ::= { myEntityMIB 2 } myEntityStateChgDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The description of entity change." ::= { myEntityMIBTraps 1 } myEntityStatusChange NOTIFICATION-TYPE OBJECTS {myEntityStateChgDesc} STATUS current DESCRIPTION "while status of the entity changed, then this trap will be sent." ::= { myEntityMIBTraps 2 } myTemperatureWarningDesc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..256)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "温度状态的变化情况的描述." ::= { myEntityMIBTraps 3 } myTemperatureWarning NOTIFICATION-TYPE OBJECTS { myTemperatureWarningDesc } STATUS current DESCRIPTION " 当这个模块的温度状态发生变化时，这个Trap将发出." ::= { myEntityMIBTraps 4 } -- conformance information myDeviceMIBConformance OBJECT IDENTIFIER ::= { myEntityMIB 3 } myDeviceMIBCompliances OBJECT IDENTIFIER ::= { myDeviceMIBConformance 1 } myDeviceMIBGroups OBJECT IDENTIFIER ::= { myDeviceMIBConformance 2 } -- compliance statements myDeviceMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the My Device MIB" MODULE -- this module MANDATORY-GROUPS { myDeviceInfoMIBGroup, myModuleInfoMIBGroup } GROUP myOptionalDevInfoMIBGroup DESCRIPTION "This group is optional for those system which support device priority,alias and macaddress information" GROUP myEntityChgDescGroup DESCRIPTION "This group is mandatory only for those system which support entity change notification." GROUP myDeviceMIBNotificationGroup DESCRIPTION "This group is mandatory only for those system which support entity change notification." GROUP myModuleTempStateGroup DESCRIPTION "当系统支持温度状态检测时，必须包含此组." GROUP myPowerStateGroup DESCRIPTION "当系统支持识别电源的状态时，必须包含这个组." GROUP myFanStateGroup DESCRIPTION "当系统支持设别风扇的状态时，必须包含这个组." GROUP myTemperatureWarningDescGroup DESCRIPTION "当系统支持温度状态通知时，必须包含此组." GROUP myTemperatureWarningGroup DESCRIPTION "当系统支持温度状态通知时，必须包含此组." ::= { myDeviceMIBCompliances 1 } -- units of conformance myDeviceInfoMIBGroup OBJECT-GROUP OBJECTS { myDeviceMaxNumber, myDeviceInfoIndex, myDeviceInfoDescr, myDeviceInfoSlotNumber, myDevicePowerStatus } STATUS current DESCRIPTION "A collection of objects providing device information to a My agent." ::= { myDeviceMIBGroups 1 } myOptionalDevInfoMIBGroup OBJECT-GROUP OBJECTS { myDeviceMacAddress, myDevicePriority, myDeviceAlias, myDeviceSWVersion, myDeviceHWVersion } STATUS current DESCRIPTION "A collection of objects providing optional device information to a My agent." ::= { myDeviceMIBGroups 2 } myModuleInfoMIBGroup OBJECT-GROUP OBJECTS { mySlotInfoDeviceIndex, mySlotInfoIndex, mySlotModuleInfoDescr, mySlotInfoPortNumber, mySlotInfoPortMaxNumber, mySlotInfoDesc } STATUS current DESCRIPTION "A collection of objects providing module information to a My agent." ::= { myDeviceMIBGroups 3 } myEntityChgDescGroup OBJECT-GROUP OBJECTS {myEntityStateChgDesc} STATUS current DESCRIPTION "Objects that providing a literal description of entity's change." ::= { myDeviceMIBGroups 4 } myDeviceMIBNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS {myEntityStatusChange} STATUS current DESCRIPTION "The collection of notifications which used to inform entity general status information" ::= { myDeviceMIBGroups 5} myModuleTempStateGroup OBJECT-GROUP OBJECTS { myModuleTempStateDeviceIndex, myModuleTempStateIndex, myModuleTempState } STATUS current DESCRIPTION "温度状态信息的集合." ::= { myDeviceMIBGroups 6 } myPowerStateGroup OBJECT-GROUP OBJECTS { myPowerStateDeviceIndex, myPowerStateIndex, myPowerState } STATUS current DESCRIPTION "电源状态信息的集合." ::= { myDeviceMIBGroups 7 } myFanStateGroup OBJECT-GROUP OBJECTS { myFanStateDeviceIndex, myFanStateIndex, myFanState } STATUS current DESCRIPTION "风扇状态信息的集合." ::= { myDeviceMIBGroups 8 } myTemperatureWarningDescGroup OBJECT-GROUP OBJECTS { myTemperatureWarningDesc } STATUS current DESCRIPTION "温度状态转变通知描述的集合." ::= { myDeviceMIBGroups 9 } myTemperatureWarningGroup NOTIFICATION-GROUP NOTIFICATIONS { myTemperatureWarning } STATUS current DESCRIPTION "温度状态转变通知的集合" ::= { myDeviceMIBGroups 10} -- definitions in RFC 1213 made END