-- ***************************************************************** -- RDN-PROCESS-MIB.mib: -- Motorola BSR's CPU and Memory Statistics MIB -- -- Copyright (c) 2003, 2008 by Motorola, Inc. -- All rights reserved. -- ***************************************************************** RDN-PROCESS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF rdnChassis FROM RDN-CHASSIS-MIB; rdnProcessMIB MODULE-IDENTITY LAST-UPDATED "200808080000Z" -- 08 August 2008 ORGANIZATION "Motorola, Inc." CONTACT-INFO "Motorola Inc. Customer Service 101 Tournament Drive Horsham, PA 19044 US Tel: +1 888 944 4357 Int Tel: +1 215 323 0044 Fax: +1 215 323 1502 Email: CPSSupport@Motorola.com" DESCRIPTION "The MIB module to describe active system processes and memory usages. Copyright (C) 2003, 2008 by Motorola, Inc. All rights reserved." REVISION "200808080000Z" -- 08 August 2008 DESCRIPTION "Added Copyright Statement into MIB modules's description." REVISION "200311050000Z" DESCRIPTION "Updated the CONTACT-INFO." REVISION "200303180000Z" DESCRIPTION "Initial version of this MIB." ::= { rdnChassis 20 } -- Textual Conventions RdnTaskPriorityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The task priority in the BSR system. It maps from the vxWorks task priorities: 0 to 10: critical 11 to 50: high 51 to 100: normal 101 to 254: low 255: notAssigned" SYNTAX INTEGER { critical(1), high(2), normal(3), low(4), notAssigned(5) } -- This MIB displays memory and CPU utilization on Motorola BSR devices. -- CPU utilization gives a general idea of how busy the processor is. -- Please note that this information should be used as an estimate only. rdnProcessMIBObjects OBJECT IDENTIFIER ::= { rdnProcessMIB 1 } --Motorola CPU Total Utilization Table rdnCPUTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF RdnCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of overall CPU utilizations per processor. " ::= { rdnProcessMIBObjects 1 } rdnCPUTotalEntry OBJECT-TYPE SYNTAX RdnCPUTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Overall information about the CPU utilization." INDEX { rdnSlotSnmpIndex, rdnCPUIndex } ::= { rdnCPUTotalTable 1 } RdnCPUTotalEntry ::= SEQUENCE { rdnSlotSnmpIndex INTEGER, rdnCPUIndex Unsigned32, rdnCPUType DisplayString, rdnTotalAllocatableMem Unsigned32, rdnTotalMemAllocated Unsigned32, rdnTotalFreeMem Unsigned32, rdnTotalCPUUtilization5Sec Unsigned32, rdnTotalCPUUtilization1Min Unsigned32, rdnTotalCPUUtilization5Min Unsigned32 } rdnSlotSnmpIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Logical index uniquely identifies a slot in the system. The value of this field is the physical slot ID plus 1." ::= { rdnCPUTotalEntry 1 } rdnCPUIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely represents a CPU in the system. This index is assigned arbitrarily by the SNMP engine. It starts from 1." ::= { rdnCPUTotalEntry 2 } rdnCPUType OBJECT-TYPE SYNTAX DisplayString ( SIZE (1..128) ) MAX-ACCESS read-only STATUS current DESCRIPTION "The predefined CPU name in human readable format. It is used to associate CPU number with the CPU name to help to identify the CPU that is querying. e.g. PowerPC 750, IXP1200-US, etc." ::= { rdnCPUTotalEntry 3 } rdnTotalAllocatableMem OBJECT-TYPE SYNTAX Unsigned32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The total memory that is available for dynamic allocation in the system." ::= { rdnCPUTotalEntry 4 } rdnTotalMemAllocated OBJECT-TYPE SYNTAX Unsigned32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The total of allocated memory for all the tasks." ::= { rdnCPUTotalEntry 5 } rdnTotalFreeMem OBJECT-TYPE SYNTAX Unsigned32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The total free memory." ::= { rdnCPUTotalEntry 6 } rdnTotalCPUUtilization5Sec OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "1/100" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU utilization rate in the last 5-second period. The unit is 1/100." ::= { rdnCPUTotalEntry 7 } rdnTotalCPUUtilization1Min OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "1/100" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU utilization rate in the last 1-minute period. The unit is 1/100." ::= { rdnCPUTotalEntry 8 } rdnTotalCPUUtilization5Min OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "1/100" MAX-ACCESS read-only STATUS current DESCRIPTION "The overall CPU utilization rate in the last 5-minute period. The unit is 1/100." ::= { rdnCPUTotalEntry 9 } -- Motorola Task Table rdnTaskTable OBJECT-TYPE SYNTAX SEQUENCE OF RdnTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of general information about the tasks on this device." ::= { rdnProcessMIBObjects 2 } rdnTaskEntry OBJECT-TYPE SYNTAX RdnTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "General information, about an active task on this device. One entry for each CPU, each task." INDEX { rdnSlotSnmpIndex, rdnCPUIndex, rdnTaskId } ::= { rdnTaskTable 1 } RdnTaskEntry ::= SEQUENCE { rdnTaskId Unsigned32, rdnTaskName DisplayString, rdnTaskPriority RdnTaskPriorityType, rdnTaskMemAllocated Unsigned32, rdnTaskUtil5Sec Unsigned32, rdnTaskUtil1Min Unsigned32, rdnTaskUtil5Min Unsigned32 } rdnTaskId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This entry is generated when task is created by the OS (also called process ID, PID). It unique identifies a task that is running in the system (per CPU system)." ::= { rdnTaskEntry 1 } rdnTaskName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name associated with this task/process." ::= { rdnTaskEntry 2 } rdnTaskPriority OBJECT-TYPE SYNTAX RdnTaskPriorityType MAX-ACCESS read-only STATUS current DESCRIPTION "The priority level at which the task is running." ::= { rdnTaskEntry 3 } rdnTaskMemAllocated OBJECT-TYPE SYNTAX Unsigned32 UNITS "byte" MAX-ACCESS read-only STATUS current DESCRIPTION "The total memory that is allocated by this task." ::= { rdnTaskEntry 4 } rdnTaskUtil5Sec OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "1/100" MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization rate for this task during the past 5 seconds interval." ::= { rdnTaskEntry 5 } rdnTaskUtil1Min OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "1/100" MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization rate for this task during the past 1 minute interval." ::= { rdnTaskEntry 6 } rdnTaskUtil5Min OBJECT-TYPE SYNTAX Unsigned32(0..100) UNITS "1/100" MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization rate for this task during the past 5 minute interval. Unit is 1/1000. " ::= { rdnTaskEntry 7 } -- notifications rdnProcessMIBNotifPrefix OBJECT IDENTIFIER ::= { rdnProcessMIB 2 } rdnProcessMIBNotifs OBJECT IDENTIFIER ::={ rdnProcessMIBNotifPrefix 0 } -- (no notifications are currently defined) -- conformance information rdnProcessMIBConformance OBJECT IDENTIFIER ::= { rdnProcessMIB 3 } rdnProcessCompliances OBJECT IDENTIFIER ::= { rdnProcessMIBConformance 1 } rdnProcessGroups OBJECT IDENTIFIER ::= { rdnProcessMIBConformance 2 } rdnProcessMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Motorola Process MIB." MODULE -- this module MANDATORY-GROUPS { rdnCPUTotalGroup, rdnTaskGroup} ::= { rdnProcessCompliances 1 } -- units of conformance rdnCPUTotalGroup OBJECT-GROUP OBJECTS { rdnCPUType, rdnTotalAllocatableMem, rdnTotalMemAllocated, rdnTotalFreeMem, rdnTotalCPUUtilization5Sec, rdnTotalCPUUtilization1Min, rdnTotalCPUUtilization5Min } STATUS current DESCRIPTION "A collection of objects providing total CPU utilization ratio for each CPU in the system." ::= { rdnProcessGroups 1 } rdnTaskGroup OBJECT-GROUP OBJECTS { rdnTaskId, rdnTaskName, rdnTaskPriority, rdnTaskMemAllocated, rdnTaskUtil5Sec, rdnTaskUtil1Min, rdnTaskUtil5Min } STATUS current DESCRIPTION "A collection of objects providing per task information in the system." ::= { rdnProcessGroups 2 } END