-- ***************************************************************** -- RDN-CHANNEL-BONDING-MIB.mib: -- Motorola BSR's Channel Bonding MIB -- -- Copyright (C) 2007, 2008 by Motorola, Inc. -- All rights reserved. -- ***************************************************************** RDN-CHANNEL-BONDING-MIB DEFINITIONS ::= BEGIN IMPORTS riverdelta FROM RDN-MIB NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter64, Counter32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, MacAddress FROM SNMPv2-TC -- RFC 2579 ifIndex, InterfaceIndex FROM IF-MIB InetAddressIPv6 FROM INET-ADDRESS-MIB docsIfCmtsCmStatusIndex FROM DOCS-IF-MIB ChSetId, IfDirection FROM DOCS-IF3-MIB; rdnChannelBondingMib MODULE-IDENTITY LAST-UPDATED "201107200000Z" -- May 20, 2011 ORGANIZATION "Motorola" CONTACT-INFO "Motorola Customer Service 101 Tournament Drive Horsham, PA 19044 US Tel: +1 888 944 4357 Int Tel: +1 215 323 0044 Fax: +1 215 323 1502 Email: CPSSupport@Motorola.com" DESCRIPTION "MIB module for Motorola Downstream/Upstream Channel Bonding. Copyright (C) 2007, 2008 by Motorola, Inc. All rights reserved." REVISION "201107200000Z" -- July 20, 2011 DESCRIPTION "Revise attributes in rdnCmtsCmPartialServiceTable. rdnCmtsCmPSAssignedChSetList rdnCmtsCmPSNonActiveChList rdnCmtsCmPSIpv4Addr rdnCmtsCmPSIpv6Addr. " REVISION "201105170000Z" -- May 17, 2011 DESCRIPTION "Add rdnCmtsCmPartialServiceTable." REVISION "201105020000Z" -- May 02, 2011 DESCRIPTION "Modify DS bonding tables to be integrated US/DS; increase DS bonding group size to 8 channels" REVISION "200808080000Z" -- August 8, 2008 DESCRIPTION "Added Copyright Statement into MIB modules's description." REVISION "200702260000Z" -- February 26, 2006 DESCRIPTION "Initial Version. " ::= { riverdelta 9 } -- Textual conventions ChSetListStr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " A string containing a comma separated list of channels. Channels can be either physical or logical channels. The formatting of each channel will follow the board specific numbering scheme. (e.g. 5/2/0,5/3/0,5/4/0 or 15/2/0/2,15/3/0/2). Allowing for (future) 11 chars/ch * 16 chs = 176 bytes." SYNTAX OCTET STRING (SIZE (0..176)) -- -- RDN downstream and upstream bonding groups -- -- -- The following table is implemented on -- the SRM. -- rdnBondingGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RdnBondingGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes downstream and upstream channel bonding groups" REFERENCE "Proprietary MIB." ::= { rdnChannelBondingMib 5 } rdnBondingGroupEntry OBJECT-TYPE SYNTAX RdnBondingGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provides a list of attributes for a downstream or upstream channel in each bonding group for each mac domain. An entry in this table exists for each channel in each defined bonding group on each mac domain (ifEntry with ifType of docsCableMaclayer(127))" INDEX { rdnBondingGroupMacIfIndex, rdnBondingGroupDir, rdnBondingGroupId, rdnBondingGroupChanIndex } ::= { rdnBondingGroupTable 1 } RdnBondingGroupEntry ::= SEQUENCE { rdnBondingGroupMacIfIndex INTEGER, rdnBondingGroupDir IfDirection, rdnBondingGroupId INTEGER, rdnBondingGroupChanIndex INTEGER, rdnBondingGroupChanId INTEGER } rdnBondingGroupMacIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This references the mac domain to which this bonding group is bound." ::= { rdnBondingGroupEntry 1 } rdnBondingGroupDir OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute defines the direction (downstream or upstream) of the bonding group" ::= { rdnBondingGroupEntry 2 } rdnBondingGroupId OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bonding group identifier" ::= { rdnBondingGroupEntry 3 } rdnBondingGroupChanIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the index into a bonding groups channel list (1-8). A downstream bonding group can have up to 8 channels. an upstream bonding group can have up to 4 logical channels. " ::= {rdnBondingGroupEntry 4} rdnBondingGroupChanId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The downstream or upstream channel identifier. This value is equivalent to docsIfDownChannelId or docsIfUpChannelId" ::= { rdnBondingGroupEntry 5 } -- -- rdnBondingGroupStatsTable -- rdnBondingGroupStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RdnBondingGroupStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists statistic counts for each downstream or upstream in each bonding group for each mac domain." REFERENCE "Proprietary MIB." ::= { rdnChannelBondingMib 6 } rdnBondingGroupStatsEntry OBJECT-TYPE SYNTAX RdnBondingGroupStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provides statistic counts for all downstream or upstream channels in a bonding group for each mac domain. An entry in this table exists for each channel in each bonding group on each mac domain (each ifEntry with an ifType of docsCableMaclayer(127))." INDEX { rdnBondingGroupMacIfIndex, rdnBondingGroupDir, rdnBondingGroupId, rdnBondingGroupChanIndex } ::= { rdnBondingGroupStatsTable 1 } RdnBondingGroupStatsEntry ::= SEQUENCE { rdnBondingGroupStatsChanId INTEGER, rdnBondingGroupStatsOctetCount Counter64, rdnBondingGroupStatsPacketCount Counter64 } rdnBondingGroupStatsChanId OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The downstream or upstream channel identifier. This value is equivalent to docsIfDownChannelId or docsIfUpChannelId" ::= { rdnBondingGroupStatsEntry 1 } rdnBondingGroupStatsOctetCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This entry contains the statistical count of the number of octets sent through this downstream or upstream for this bonding group." ::= { rdnBondingGroupStatsEntry 2 } rdnBondingGroupStatsPacketCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This entry contains the statistical count of the number of packets sent through this downstream or number of segments sent through this upstream for this bonding group." ::= { rdnBondingGroupStatsEntry 3 } -- -- rdnBondingGroupCmTable -- rdnBondingGroupCmTable OBJECT-TYPE SYNTAX SEQUENCE OF RdnBondingGroupCmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table shows the number of modems registered on the downstream or upstream bonding group" REFERENCE "Proprietary MIB." ::= { rdnChannelBondingMib 7 } rdnBondingGroupCmEntry OBJECT-TYPE SYNTAX RdnBondingGroupCmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provides a list of attributes for a single downstream or upstream bonding group. An entry in this table exists for each defined bonding group." INDEX {rdnBondingGroupMacIfIndex, rdnBondingGroupDir, rdnBondingGroupId } ::= { rdnBondingGroupCmTable 1 } RdnBondingGroupCmEntry ::= SEQUENCE { rdnBondingGroupCmRegisteredModems Integer32 } rdnBondingGroupCmRegisteredModems OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of modems registered under this bonding group" ::= { rdnBondingGroupCmEntry 1 } rdnCmtsCmPartialServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF RdnCmtsCmPartialServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes Cable Modems operating in partial service mode in either downstream or upstream direction due to deficiencies in available resources to match requested performance." REFERENCE "Proprietary MIB." ::= { rdnChannelBondingMib 8 } rdnCmtsCmPartialServiceEntry OBJECT-TYPE SYNTAX RdnCmtsCmPartialServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry provides info on CMs working in partial service mode. Info including the Cable modem Id, MAC domain ifIndex, the CM macAddress, Active and Inactive Channel Set ID. The table is indexed by Cable modem Id and the bonding group direction. The table provides a reference to docsIf3UsChSetEntry/docsIf3DsChSetEntry used in DOCS-IF3-MIB.mibs via MacIfIndex and ChSetId." INDEX { docsIfCmtsCmStatusIndex, rdnCmtsCmPSDir } ::= { rdnCmtsCmPartialServiceTable 1 } RdnCmtsCmPartialServiceEntry ::= SEQUENCE { rdnCmtsCmPSDir IfDirection, rdnCmtsCmPSMacDomainIfIndex InterfaceIndex, rdnCmtsCmPSMacAddress MacAddress, rdnCmtsCmPSAssignedChSetId ChSetId, rdnCmtsCmPSActiveChSetId ChSetId, rdnCmtsCmPSAssignedChSetList ChSetListStr, rdnCmtsCmPSNonActiveChList ChSetListStr, rdnCmtsCmPSIpv4Addr IpAddress, rdnCmtsCmPSIpv6Addr InetAddressIPv6 } rdnCmtsCmPSDir OBJECT-TYPE SYNTAX IfDirection MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute defines the direction (downstream or upstream) of the bonding group" ::= { rdnCmtsCmPartialServiceEntry 1 } rdnCmtsCmPSMacDomainIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC interface index under which this channel's bonding group is configured. This will be an ifType of docsCableMaclayer(127). " ::= { rdnCmtsCmPartialServiceEntry 2 } rdnCmtsCmPSMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the Cable Modem in Partial Service." ::= { rdnCmtsCmPartialServiceEntry 3 } rdnCmtsCmPSAssignedChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "The assigned Channel Set for the current modem ." ::= { rdnCmtsCmPartialServiceEntry 4 } rdnCmtsCmPSActiveChSetId OBJECT-TYPE SYNTAX ChSetId MAX-ACCESS read-only STATUS current DESCRIPTION "The currently active Channel Set for the current modem ." ::= { rdnCmtsCmPartialServiceEntry 5 } rdnCmtsCmPSAssignedChSetList OBJECT-TYPE SYNTAX ChSetListStr MAX-ACCESS read-only STATUS current DESCRIPTION "The currently assigned Channels for the current modem." ::= { rdnCmtsCmPartialServiceEntry 6 } rdnCmtsCmPSNonActiveChList OBJECT-TYPE SYNTAX ChSetListStr MAX-ACCESS read-only STATUS current DESCRIPTION "The current non-active Channel(s) for the current modem." ::= { rdnCmtsCmPartialServiceEntry 7 } rdnCmtsCmPSIpv4Addr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 assigned to the current modem. If the modem is operating in a IPv6 only provisioning mode this field should return 0.0.0.0." ::= { rdnCmtsCmPartialServiceEntry 8 } rdnCmtsCmPSIpv6Addr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the IPv6 address of the current CM. If the CM has no Internet IPv6 address assigned the value of this attribute is the all zeros address." ::= { rdnCmtsCmPartialServiceEntry 9 } END