PKTC-MDI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC ifIndex FROM IF-MIB pktcApplicationMibs FROM CLAB-DEF-MIB; pktcMdiMib MODULE-IDENTITY LAST-UPDATED "200909170000Z" -- September 17, 2009 ORGANIZATION "Cable Television Laboratories, Inc." CONTACT-INFO "Broadband Network Services Cable Television Laboratories, Inc. 858 Coal Creek Circle, Louisville, CO 80027, USA Phone: +1 303-661-9100 Email: mibs@cablelabs.com Acknowledgements: Thomas Clack, Broadcom Eugene Nechamkin, Broadcom Josh Littlefield, Cisco Jerry Mahler, Motorola Eduardo Cardona, CableLabs." DESCRIPTION "This MIB module contains the PacketCable client Telephony Delivery Interface (MDI) and Network Delivery Interface relationships." REVISION "200909170000Z" -- September 17, 2009 DESCRIPTION "Revised version includes ECN DECT-PROV-N-09.0576-7 and published as part of PKT-SP-DECT-PROV-I02" REVISION "200902260000Z" -- February 26, 2009 DESCRIPTION "Initial version, published as part of the CableLabs DECT Provisioning Specification PKT-SP-DECT-PROV-I01-090226 Copyright 2009 Cable Television Laboratories, Inc. All rights reserved." ::= { pktcApplicationMibs 6 } -- Textual Conventions PktcMdiType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This data type represents the MDI types. 'pots' refers to Plan Old Telephony Service analog phone lines. 'dectFP' refers to DECT FP air interface. 'dectPP' refers to DECT PP air interface." REFERENCE "PacketCable DECT-HDV Specification" SYNTAX INTEGER { pots(1), dectPP(2) } -- Object Definitions pktcMdiNotifications OBJECT IDENTIFIER ::= { pktcMdiMib 0 } pktcMdiObjects OBJECT IDENTIFIER ::= { pktcMdiMib 1 } pktcMdiMdiTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcMdiMdiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the list of Media Delivery Interface (MDI) of the device." REFERENCE "PacketCable DECT Provisioning Specification" ::= {pktcMdiObjects 1 } pktcMdiMdiEntry OBJECT-TYPE SYNTAX PktcMdiMdiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Conceptual row of pktcMdiMdiTable. The device associates one instance of this object for each type of port. For POTS Ports the Instance identifier corresponds to the Interface Index (i.e., ifIndex) associated to the POTS (e.g., ifIndex 9...) For DECT Ports there is an instance for each paired PP in the order of appearance in a manner that the assigned entry identifier (Interface Index) is persistent cross device initializations while the PP stays paired within the FP. Each PP association with the interface Index is maintained by the unique PP identifier (e.g., IPEI). The starting ifIndex number is defined in the device capabilities." INDEX { ifIndex } ::= {pktcMdiMdiTable 1 } PktcMdiMdiEntry ::= SEQUENCE { pktcMdiMdiType PktcMdiType, pktcMdiMdiName SnmpAdminString, pktcMdiMdiActivityStatus INTEGER } pktcMdiMdiType OBJECT-TYPE SYNTAX PktcMdiType MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute represents the identifier of the Media Port in the context of the MDI type. It can be used as a reference point to objects related to the particular Media Port. For DECT Media Ports, this attribute represents a unique identifier of the DECT handset (PP), typically the value of 'IPEI' contained in the PUN part of the IPUI is used by default, and for DECT handsets of type residential/default. IPEI is 36 bits, therefore, the representation of this attribute is a 5-octet string with the 4 MSB set to '0'. For POTs media Ports this attribute has no meaning and reports a sequential number for the set of POTS available." ::= {pktcMdiMdiEntry 1 } pktcMdiMdiName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute represents the name assigned by the user or operator to the media port. This attribute provides an identification of the media port in a human readable format. For example: 'Office Line', 'Fax Line', telephone number, etc. By default the FP populates the following values: For POTS as 'TERM n' where n = 1..m and n=1 corresponds to ifIndex = 9 For DECT handsets as 'handset n' where n = 1..p and p is the maximum number of PP supported or allowed to register, which ever is small. Typically 'n' corresponds to the PP terminal identifier." ::= {pktcMdiMdiEntry 2 } pktcMdiMdiActivityStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the service media activities potentially going on for the particular MDI: 'notActive': No service media activities are currently happening through the port. 'active': There are service media activities on the port. Examples of Services media activities (e.g., telephony) are: tones generated on the port in response to SIP requests, loopback tests, etc. The particular definition of all Telephony activities should be specified in the corresponding document for the particular PacketCable client." ::= {pktcMdiMdiEntry 3 } pktcMdiNslTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcMdiNslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the Network Service Line definitions of the device. This object allows the aggregation of MDIs as part of a NSL." REFERENCE "PacketCable DECT Provisioning Specification" ::= {pktcMdiObjects 2 } pktcMdiNslEntry OBJECT-TYPE SYNTAX PktcMdiNslEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Conceptual row of pktcMdiNslTable. A PacketCable HDV client that supports a single analog line must consider all the MDIs as part of a single line NSL#1 A PacketCable HDV client capable of multi-line support that has not configured an instance in the Nsl object must consider all MDIs as part of a single line NSL#1." INDEX { pktcMdiNslIndex } ::= {pktcMdiNslTable 1 } PktcMdiNslEntry ::= SEQUENCE { pktcMdiNslIndex Unsigned32, pktcMdiNslName SnmpAdminString, pktcMdiNslPortListIn SnmpAdminString, pktcMdiNslPortListOut SnmpAdminString, pktcMdiNslRowStatus RowStatus } pktcMdiNslIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This key represents the unique identifier of a Network Service Line (NSL) assigned by the Operator to the Subscriber. In NCS this value represents the numeric value of an CNS telephony endpoint (aaln/#). In RST this number represents the number in a NSL# tag and used in the mapping of RST users and PacketCable applications." ::= {pktcMdiNslEntry 1 } pktcMdiNslName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the line name assigned by a User or by the operator. This attribute provides an identification of the Service Line in a human-readable format. For example: 'Office Line', 'Fax Line' etc. Another example of human-readable identification is the Telephone Number associated with the particular NSL." ::= {pktcMdiNslEntry 2 } pktcMdiNslPortListIn OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the comma separated list of MDI Indexes (MDI.Index attribute) associated with this NSL object instance for incoming calls." ::= {pktcMdiNslEntry 3 } pktcMdiNslPortListOut OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute represents the comma separated list of MDI Indexes (MDI.Index attribute) associated with this NSL object instance for outgoing requests. For the voice telephony service this attribute does not preclude a HDV PP to make an outgoing call from a phone line not associated with the NSL." ::= {pktcMdiNslEntry 4 } pktcMdiNslRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The conceptual row status of this object." ::= {pktcMdiNslEntry 5 } -- Conformance Definitions pktcMdiMibConformance OBJECT IDENTIFIER ::= { pktcMdiMib 2 } pktcMdiMibCompliances OBJECT IDENTIFIER ::= { pktcMdiMibConformance 1 } pktcMdiMibGroups OBJECT IDENTIFIER ::= { pktcMdiMibConformance 2 } pktcMdiCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the MDI requirements of the PacketCable client device." MODULE -- this MODULE MANDATORY-GROUPS { pktcMdiGroup } ::= { pktcMdiMibCompliances 1 } pktcMdiGroup OBJECT-GROUP OBJECTS { pktcMdiMdiType, pktcMdiMdiName, pktcMdiMdiActivityStatus, pktcMdiNslName, pktcMdiNslPortListIn, pktcMdiNslPortListOut, pktcMdiNslRowStatus } STATUS current DESCRIPTION "Group of objects for Telephony Delivery Interfaces (MDI)." ::= { pktcMdiMibGroups 1 } END