--MibName=rcVlan -- ***************************************************************** -- RAISECOM-VLAN-MIB.MIB: Raisecom VLAN MIB file -- April,2008,guoxiaodan,add PortBasedVlan and QinQVlanTranslation definition -- FEB 2005, xieyong -- -- Copyright (c) 1994-2004 by Raisecom, Inc. -- All rights reserved. -- -- ***************************************************************** SWITCH-VLAN-MIB DEFINITIONS ::= BEGIN IMPORTS iscomSwitch FROM RAISECOM-BASE-MIB MacAddress, RowStatus FROM SNMPv2-TC Vlanset, PortList, EnableVar FROM SWITCH-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB; rcVlan MODULE-IDENTITY LAST-UPDATED "200502220000Z" ORGANIZATION "Raisecom, Inc." CONTACT-INFO " Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: support@raisecom.com" DESCRIPTION "description of vlan object." ::= { iscomSwitch 19} -- ------------------------------------------------------------- -- groups in the SWITCH-VLAN MIB -- ------------------------------------------------------------- switchportConfig OBJECT IDENTIFIER ::= { rcVlan 1 } dot1qConfig OBJECT IDENTIFIER ::= { rcVlan 2 } rcPortBasedVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF PortBasedVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Forwarding portlist table." ::= { rcVlan 3 } rcQinQVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF QinQVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QinQ Vlan Mapping Port table." ::= { rcVlan 4 } rcQinQVlanTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF QinQVlanTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Inner Vlan Mapping Configure table." ::= { rcVlan 5 } -- ------------------------------------------------------------- -- The Switchport VLAN Configuration Table -- ------------------------------------------------------------- rcVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan port configuration table." ::= { switchportConfig 1 } rcVlanPortEntry OBJECT-TYPE SYNTAX RcVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan port configuration table entry." INDEX { rcVlanPortId } ::= { rcVlanPortTable 1 } RcVlanPortEntry ::= SEQUENCE { rcVlanPortId INTEGER, rcVlanPortMode INTEGER, rcVlanPortAccessVlanId INTEGER, rcVlanPortHybridVlanAllow Vlanset, rcVlanPortHybridVlanUntag Vlanset, rcVlanPortTrunkVlanAllow Vlanset, rcVlanPortVlanNative INTEGER, rcVlanPortTrunkTagNativeEnable EnableVar, rcVlanPortServiceEtherType INTEGER, rcVlanPortIngressVlanTranslateEnable EnableVar, rcVlanPortEgressVlanTranslateEnable EnableVar, rcVlanPortEgressVlanTranslateOffset INTEGER, rcVlanPortAcceptFrameType INTEGER, rcVlanPortIngressFiltering EnableVar, rcVlanPortSvlVlans Vlanset } rcVlanPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index based 1 that uniquely identifies a switch port." ::= { rcVlanPortEntry 1 } rcVlanPortMode OBJECT-TYPE SYNTAX INTEGER { access(2), hybrid(3), trunk(4), dot1q-tunnel(5), hybrid-dt(6), trunk-dt(7), hybrid-tn(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan port mode." ::= { rcVlanPortEntry 2 } rcVlanPortAccessVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Access vlan id, when port is in access or tunnel mode." ::= { rcVlanPortEntry 3 } rcVlanPortHybridVlanAllow OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "Allowed vlans when port is in hybrid mode." ::= { rcVlanPortEntry 4 } rcVlanPortHybridVlanUntag OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "Untagged vlans when port is in hybrid mode." ::= { rcVlanPortEntry 5 } rcVlanPortTrunkVlanAllow OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "Allowed vlans when port is in trunk mode." ::= { rcVlanPortEntry 6 } rcVlanPortVlanNative OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Native vlan when port is in trunk or hybrid mode." ::= { rcVlanPortEntry 7 } rcVlanPortTrunkTagNativeEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable tagging native vlan packets when port is in trunking mode." ::= { rcVlanPortEntry 8 } rcVlanPortServiceEtherType OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Provider vlan S-TAG(Service Tag) type." ::= { rcVlanPortEntry 9 } rcVlanPortIngressVlanTranslateEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable ingress vlan translate." ::= { rcVlanPortEntry 10 } rcVlanPortEgressVlanTranslateEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable egress vlan translate." ::= { rcVlanPortEntry 11 } rcVlanPortEgressVlanTranslateOffset OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan translate offset value." ::= { rcVlanPortEntry 12 } rcVlanPortAcceptFrameType OBJECT-TYPE SYNTAX INTEGER{all(1), tag(2), untag(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Accept frame type." ::= { rcVlanPortEntry 13 } rcVlanPortIngressFiltering OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable ingress filtering." ::= { rcVlanPortEntry 14 } rcVlanPortSvlVlans OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "svl vlan list." ::= { rcVlanPortEntry 15 } -- ------------------------------------------------------------- -- The Switchport VLAN Mapping Configuration Table -- ------------------------------------------------------------- rcVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF RcVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan Mapping configuration table." ::= { switchportConfig 2 } rcVlanMappingEntry OBJECT-TYPE SYNTAX RcVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan Mapping configuration table entry." INDEX { rcVlanMappingPortId,rcVlanMappingInnerVlanId } ::= { rcVlanMappingTable 1 } RcVlanMappingEntry ::= SEQUENCE { rcVlanMappingPortId INTEGER, rcVlanMappingInnerVlanId INTEGER, rcVlanMappingOuterVlanId INTEGER, rcVlanMappingHwStatus EnableVar, rcVlanMappingRowStatus RowStatus } rcVlanMappingPortId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index based 1 that uniquely identifies a switch port." ::= { rcVlanMappingEntry 1 } rcVlanMappingInnerVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the inner VLAN ID entering the switch from the customer network. The range is from 1 to 4094." ::= { rcVlanMappingEntry 2 } rcVlanMappingOuterVlanId OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the assigned added outer VLAN ID." ::= { rcVlanMappingEntry 3 } rcVlanMappingHwStatus OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-only STATUS current DESCRIPTION "In hardware or not." ::= { rcVlanMappingEntry 4 } rcVlanMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { rcVlanMappingEntry 5 } -- ------------------------------------------------------------- -- The Static VLAN Database -- ------------------------------------------------------------- rDot1qVlanStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF RDot1qVlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { dot1qConfig 1 } rDot1qVlanStaticEntry OBJECT-TYPE SYNTAX RDot1qVlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a VLAN configured into the device by (local or network) management." INDEX { rDot1qVlanIndex } ::= { rDot1qVlanStaticTable 1 } RDot1qVlanStaticEntry ::= SEQUENCE { rDot1qVlanIndex INTEGER, rDot1qVlanStaticName SnmpAdminString, rDot1qVlanStaticEgressPorts PortList, rDot1qVlanStaticUntaggedPorts PortList, rDot1qVlanStaticActiveStatus INTEGER, rDot1qVlanStaticRowStatus RowStatus, rDot1qVlanStaticPriority INTEGER } rDot1qVlanIndex OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN-ID or other identifier refering to this VLAN." ::= { rDot1qVlanStaticEntry 1 } rDot1qVlanStaticName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively assigned string, which may be used to identify the VLAN." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { rDot1qVlanStaticEntry 2 } rDot1qVlanStaticEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed." REFERENCE "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3" ::= { rDot1qVlanStaticEntry 3 } rDot1qVlanStaticUntaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option." REFERENCE "IEEE 802.1Q/D11 Section 12.10.2.1" ::= { rDot1qVlanStaticEntry 4 } rDot1qVlanStaticActiveStatus OBJECT-TYPE SYNTAX INTEGER { active(1), suspend(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the active status of this entry." ::= { rDot1qVlanStaticEntry 5 } rDot1qVlanStaticRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { rDot1qVlanStaticEntry 6 } rDot1qVlanStaticPriority OBJECT-TYPE SYNTAX INTEGER(-1..7) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the priority of the VLAN." ::= { rDot1qVlanStaticEntry 7 } -- ------------------------------------------------------------- -- Double tagging vlan -- ------------------------------------------------------------- rcVlanDtEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Indicates whether the double tagging feature is enabled on the device. enable(1) means that the double tagging feature is enabled on this device. disable(2) means that the double tagging feature is disabled." ::= { dot1qConfig 2 } rcVlanDtOuterTpid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "TPID of outer tag, when switch is in double tagging mode." ::= { dot1qConfig 3 } -- ------------------------------------------------------------- -- forwarding port -- ------------------------------------------------------------- rcPortBasedVlanEntry OBJECT-TYPE SYNTAX PortBasedVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the rcPortBasedVlanTable." INDEX { rcPortBasedVlanIndex } ::= { rcPortBasedVlanTable 1 } PortBasedVlanEntry ::= SEQUENCE { rcPortBasedVlanIndex INTEGER, rcPortBasedVlanPortlist PortList } rcPortBasedVlanIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index based 1 that uniquely identifies a switch port." --DEFVAL { {} } ::= { rcPortBasedVlanEntry 1 } rcPortBasedVlanPortlist OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Record the egress forwarding port table.A bit mask corresponding to the physical ports on the chip.Set corresponding bit to 1 to enable port egress forwarding. Set bit to 0 inhibits the port egress forwarding." DEFVAL {{}} ::= { rcPortBasedVlanEntry 2 } rcQinQVlanPortEntry OBJECT-TYPE SYNTAX QinQVlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the rcQinQVlanPortTable." INDEX { rcPortBasedVlanIndex } ::= { rcQinQVlanPortTable 1 } QinQVlanPortEntry ::= SEQUENCE { rcQinQVlanPortIndex INTEGER, rcVlanTranslationStatus INTEGER } rcQinQVlanPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index based 1 that uniquely identifies a switch port." --DEFVAL { {} } ::= { rcQinQVlanPortEntry 1 } rcVlanTranslationStatus OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether this VLAN translation is functioning on the port." DEFVAL {{}} ::= { rcQinQVlanPortEntry 2 } rcQinQVlanTranslationEntry OBJECT-TYPE SYNTAX QinQVlanTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the rcQinQVlanPortTable." INDEX { rcVlanTranslationIndex } ::= { rcQinQVlanTranslationTable 1 } QinQVlanTranslationEntry ::= SEQUENCE { rcVlanTranslationIndex Unsigned32, rcVlanTranslatedNum Unsigned32, rcVlanTranslationRowStatus RowStatus } rcVlanTranslationIndex OBJECT-TYPE SYNTAX Unsigned32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN translation is applied in the ingress Layer 2 port. It makes the traffic arriving on the VLAN with this VLAN ID to be mapped to or tagged with the corresponding instance of rcVlanMappingNum on the device. " --DEFVAL { {} } ::= { rcQinQVlanTranslationEntry 1 } rcVlanTranslatedNum OBJECT-TYPE SYNTAX Unsigned32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN translation is applied in the ingress Layer 2 port. It makes the traffic arriving on the VLAN with the corresponding instance of rcVlanMappingIndex on the device to be mapped to or tagged with the VLAN of this VLAN ID." ::= { rcQinQVlanTranslationEntry 2 } rcVlanTranslationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the conceptual row for this global VLAN translation." ::= { rcQinQVlanTranslationEntry 3 } END