------------------------------------------------------------------------------
------------------------------------------------------------------------------
--
--  File         : switch-port-mib.mib
--  Description  : rose software port command  mib defination 
--  Version      : 0.1   
--  Date         : Dec 3, 2008     
--
--  Copyright (c) 2003-2004 Beijing Raisecom Science & Technology Co., ltd  All Rights Reserved.
--      
-- *****************************************************************       

-- *****************************************************************
-- Modi Report：Format: <number>, <time>, <author>, <desc> 
-- 03, 20121226, renxiaoqiang, PHY enhance              
-- 02, 20120923, yingjiangang, PHY
-- 01, 20110726, yangzhognhong, add new enum value for nodes rcIfPortMAUType  rcIfPortMAUSpeedSet and 
--                              rcIfPortPHYSpeedGet to support the 10G interface
--
------------------------------------------------------------------------------
------------------------------------------------------------------------------

    SWITCH-INTERFACE-PORT-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE,
        Integer32, Counter32,  
        NOTIFICATION-TYPE                       FROM SNMPv2-SMI        
        TruthValue                              FROM SNMPv2-TC        
        OBJECT-GROUP                            FROM SNMPv2-CONF                
        rcSystem               				    FROM SWITCH-SYSTEM-MIB
        EnableVar						        FROM SWITCH-TC;

    rcIfPortInfoConfig MODULE-IDENTITY
    
        LAST-UPDATED    "0812030000Z"  -- Dec 03, 2008
        ORGANIZATION    "Raisecom Science & Technology Co., ltd"
        CONTACT-INFO    "Raisecom Science & Technology Co., ltd.
                         E-mail: support@raisecom.com"

        DESCRIPTION     "iscom switch system interface port Enterprise MIB definition."

        REVISION        "0812030000Z"  -- Dec 03, 2008
        DESCRIPTION     "Initial MIB creation."
        ::= { rcSystem 7 }

-- If port Group        
rcIfPortPHYInfoConfig     	OBJECT IDENTIFIER ::= { rcIfPortInfoConfig 1 } 

-- PHY related function Group  
rcIfPortPHYNotifications    OBJECT IDENTIFIER ::= { rcIfPortPHYInfoConfig 1 }
rcIfPortPHYInfomation       OBJECT IDENTIFIER ::= { rcIfPortPHYInfoConfig 2 }  

rcIfPortConnectorInsertTrap  NOTIFICATION-TYPE
				OBJECTS { rcIfPortPHYIndex, rcIfPortMAUIndex}
				STATUS  current
				DESCRIPTION
					"port connector insert trap."
				::= { rcIfPortPHYNotifications 1 } 
				
rcIfPortConnectorRemoveTrap  NOTIFICATION-TYPE
				OBJECTS { rcIfPortPHYIndex, rcIfPortMAUIndex}
				STATUS  current
				DESCRIPTION
					"port connector delete trap."
				::= { rcIfPortPHYNotifications 2 } 

-- if Port PHY table
    rcIfPortPHYTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RcIfPortPHYEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table of switch port and associated properties."
        ::= { rcIfPortPHYInfomation 1 }

    rcIfPortPHYEntry OBJECT-TYPE
        SYNTAX RcIfPortPHYEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry containing PHY management information applicable to a particular
             interface port."
        INDEX { rcIfPortPHYIndex }
        ::= { rcIfPortPHYTable 1 }
                      
    RcIfPortPHYEntry ::= SEQUENCE {
        rcIfPortPHYIndex                  INTEGER,
        rcIfPortPHYExistence 			  TruthValue,
        rcIfPortPHYMAUNum                 INTEGER,
        rcIfPortPHYAdminStatus            INTEGER,
        rcIfPortPHYOperStatus             INTEGER,
        rcIfPortPHYSpeedGet               INTEGER,
        rcIfPortPHYDuplexGet              INTEGER,
        rcIfPortPHYFlowControlRecvStatus  EnableVar,
        rcIfPortPHYFlowControlSendStatus  EnableVar,
        rcIfPortPHYMdiStatus              INTEGER,
        rcIfPortPHYActiveMAUIndex         INTEGER,
        rcComboPortMediaMode              INTEGER,
        rcComboPortMediaPriority          INTEGER,
        rcComboPortMediaActive            INTEGER,
        rcIfPortSfpAutoDetect             INTEGER,
        rcIfPortSfpPortTypeGet	          INTEGER,
        rcIfPortPHYEEEAutoGet             INTEGER
     }
        
     rcIfPortPHYIndex             OBJECT-TYPE
        SYNTAX INTEGER 
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "A unique value, greater than zero, for each port in the managed system."
        ::= { rcIfPortPHYEntry 1 }     

-- 端口下PHY存在状态              
     rcIfPortPHYExistence         OBJECT-TYPE
        SYNTAX TruthValue 
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "A value of false(2) is returned, if there is no PHY in the port."
        ::= { rcIfPortPHYEntry 2 }
                 
-- 端口下 MAU数量   
     rcIfPortPHYMAUNum            OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "MAU number in the port. A value 0 is returned, if there is no PHY in the port.
             a value more than 1 is returned ,if the port is combo port."
        ::= { rcIfPortPHYEntry 3 } 
        
-- 端口功能管理状态            
     rcIfPortPHYAdminStatus       OBJECT-TYPE
        SYNTAX INTEGER
        {
             up(1),
             down(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The desired state of the port."  
        DEFVAL{up}
        ::= { rcIfPortPHYEntry 4 }
        
-- 端口功能操作状态 
     rcIfPortPHYOperStatus        OBJECT-TYPE
        SYNTAX INTEGER
        {
             up(1),
             down(2)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The current operational state of the port. If rcIfPortPHYAdminStatus is down(2)
             then rcIfPortOperStatus should be down(2). While rcIfPortPHYAdminStatus is 
             changed to up(1), rcIfPortPHYOperStatus should remain in the down(2) state if 
             and only if there is a fault that prevents it from going to the up(1) state 
             (e.g. Loopback-detection module detects a loop in this port )."
        ::= { rcIfPortPHYEntry 5 }      

-- 端口速率操作状态        
     rcIfPortPHYSpeedGet            OBJECT-TYPE
        SYNTAX INTEGER
        {
             illegal(0),
             unknown(1),
             speed-10M(2),
             speed-100M(3),
             speed-1000M(4),
             speed-10G(5)
           
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The actual speed state of the active MAU in the port. A value of illegal(0) 
            is retuned if the interface port is not configured for an acceptable value. 
            A value of unknown(1) is returned when rcIfPortPHYOperStatus indicates 
            down(2) for this interface port."
        ::= { rcIfPortPHYEntry 6 }
        
-- 端口双工操作状态     
     rcIfPortPHYDuplexGet               OBJECT-TYPE
        SYNTAX INTEGER
        {
             illegal(0),
             unknown(1),
             half(2),
             full(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The actual duplex state of the active MAU in the port. A value of illegal(0)
             is retuned if the interface port is not configured for an acceptable value. 
             A value of unknown(1) is returned when rcIfPortPHYOperStatus indicates
              down(2) for this interface port."
        ::= { rcIfPortPHYEntry 7 }
        
-- 端口接收PAUSE帧方向流控操作状态     
     rcIfPortPHYFlowControlRecvStatus   OBJECT-TYPE
        SYNTAX EnableVar
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The actual flow control state in receiving direction."
        ::= { rcIfPortPHYEntry 8 }
        
-- 端口发送PAUSE帧方向流控操作状态     
     rcIfPortPHYFlowControlSendStatus   OBJECT-TYPE
        SYNTAX EnableVar
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The actual flow control state in sending direction."
        ::= { rcIfPortPHYEntry 9 } 

-- 端口MDI线序操作状态     
     rcIfPortPHYMdiStatus          OBJECT-TYPE
        SYNTAX INTEGER
        {
             illegal(0),
             unknown(1),
             normal(2),
             xover(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The actual automatic MDI crossover state. A value of illegal(0) 
            is retuned if the interface port is not configured for an 
            acceptable value."
        ::= { rcIfPortPHYEntry 10 }

-- 端口下活动MAU的索引   
     rcIfPortPHYActiveMAUIndex      OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "The index of active MAU in the port."
        ::= { rcIfPortPHYEntry 11 }
        
-- 端口combo口介质类型 
     rcComboPortMediaMode OBJECT-TYPE
        SYNTAX  INTEGER{
                       not-support(0),
                       auto(1),
                       fiber-forced(2),
                       copper-forced(3)
                      }
        ACCESS read-write   
        STATUS mandatory  
                DESCRIPTION
                "The mode of combo."         
        ::= { rcIfPortPHYEntry 12 }

-- 端口combo口介质优先级       
     rcComboPortMediaPriority OBJECT-TYPE
        SYNTAX INTEGER{
                      not-support(0),
                      fiber(1),
                      copper(2)
        }
        ACCESS read-write
        STATUS mandatory
        DESCRIPTION
                "Indicates which types of media has higher priority to be active than another one."
        ::= { rcIfPortPHYEntry 13 }
               
-- 端口combo口激活介质类型           
    rcComboPortMediaActive OBJECT-TYPE
        SYNTAX INTEGER{  
                      unavailable(0),
                      fiber(1),
                      copper(2)
                      }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
            "Used to identify whether this Combo port currently be in the active state."
        ::= { rcIfPortPHYEntry 14 }      
        
-- 端口SFP自动检测使能设置           
    rcIfPortSfpAutoDetect OBJECT-TYPE
        SYNTAX INTEGER{   
                      disable(0),  
                      enable(1)
                      }
        MAX-ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "Used to identify whether this port is in sfp auto-detect mode."
        ::= { rcIfPortPHYEntry 15 } 

-- 端口SFP连接类型         
    rcIfPortSfpPortTypeGet OBJECT-TYPE
        SYNTAX INTEGER{   
                      unknown(0),  
                      copper(1),  
                      fiber100(2),
                      fiber1000(3),
                      fiber10000(4)
                    }
        MAX-ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "The SFP fiber mode operator state."
        ::= { rcIfPortPHYEntry 16 } 
 
-- 端口EEE-Auto操作模式         
    rcIfPortPHYEEEAutoGet OBJECT-TYPE
        SYNTAX INTEGER{ 
                      not-support(0),
                      enable(1),
                      disable(2)
                    }
        MAX-ACCESS read-only
        STATUS mandatory
        DESCRIPTION
            "EEE-Auto Operate Mode."
        ::= { rcIfPortPHYEntry 17 }     
 
-- if Port MAU table
    rcIfPortMAUTable                OBJECT-TYPE
        SYNTAX SEQUENCE OF RcIfPortMAUEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table of switch port and associated properties."
        ::= { rcIfPortPHYInfomation 2 }

    rcIfPortMAUEntry                OBJECT-TYPE
        SYNTAX RcIfPortMAUEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry containing management information for a particular MAU in the port."
        INDEX { rcIfPortPHYIndex, rcIfPortMAUIndex}
        ::= { rcIfPortMAUTable 1 }
                      
    RcIfPortMAUEntry ::= SEQUENCE {
        rcIfPortMAUIndex                  INTEGER,
        rcIfPortMAUType 			      INTEGER,
        rcIfPortMAUConnectorType          INTEGER,
        rcIfPortMAUConnectorStatus        INTEGER,
        rcIfPortMAUSpeedSet               INTEGER,
        rcIfPortMAUDuplexSet              INTEGER,
        rcIfPortMAUFlowControlEnable      EnableVar,
        rcIfPortMAUFlowControlRecvEnable  EnableVar,
        rcIfPortMAUFlowControlSendEnable  EnableVar,
        rcIfPortMAUMdiMode                INTEGER,
        rcIfPortMAUStatus                 INTEGER,
        rcIfPortMAUSfpPortType            INTEGER,  
        rcIfPortEEEAutoMode               INTEGER
     }   

-- 指定MAU的索引   
     rcIfPortMAUIndex              OBJECT-TYPE
        SYNTAX INTEGER
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "An index based 1 that uniquely identifies a MAU from the other 
              MAUs in the port. It should be less than rcIfPortPHYMAUNum 
              in the port."
        ::= { rcIfPortMAUEntry 1 }

-- 指定MAU的类型 
     rcIfPortMAUType               OBJECT-TYPE
        SYNTAX INTEGER
        {  
            unknown(0),
            dot3-10BASE-T(5),
            dot3-100BASE-TX(16),
            dot3-100BASE-FX(18),
            dot3-1000BASE-X(22),
            dot3-1000BASE-T(30),        
            dot3-10GBASE-X(31),
            dot3-10GBASE-R(33),
            dot3-10GBASE-W(37),
            rc-1000BASE-P(99),
            dot3-1000BASE-T1(100),
            dot3-1000BASE-T2(101)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "This object identifies the MAU type and indicates capability. 
             values for MAU types above are defined in standard IEEE 802.3 
             DOT3-MAU-MIB.my(RFC 3636). It can respect MAU capability and 
             media information.Specially,dot3-1000BASE-T1 indicates 1000BASE-T
             only support auto-negotiation,and dot3-1000BASE-T2 indicates 
             1000BASE-T only support 1000M and full-duplex.'unknown' indicates
             it is uncertain"
        ::= { rcIfPortMAUEntry 2 }

-- 指定MAU的连接器类型 
     rcIfPortMAUConnectorType       OBJECT-TYPE
        SYNTAX INTEGER
        {
            unknown(0),
            other(1),
            sfp(2),
            sfp-plus(3)
       }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "This object identifies the MAU connector type."
        ::= { rcIfPortMAUEntry 3 }

-- 指定MAU的连接器状态
     rcIfPortMAUConnectorStatus     OBJECT-TYPE
        SYNTAX INTEGER
        {
            unknown(0),
            error(1),
            not-present(2),
            present(3)
        }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "This object identifies the MAU connector status. A value of unknown(0)
              is returned if the connector can not been identified. A value of 
              error(1) is returned if the connector type is can not been 
              supported by the MAU. A value present(2) is returned if the connector 
              is connected to the MAU."
        ::= { rcIfPortMAUEntry 4 } 
        
-- 指定MAU的速率管理状态
     rcIfPortMAUSpeedSet             OBJECT-TYPE
        SYNTAX INTEGER
        {
            auto-negotiate(1),
            speed-10M(2),
            speed-100M(3),
            speed-1000M(4),       
            speed-10G(5)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "The desired speed state for the MAU. Some MAU may not support 
              setting the value of this object to some of the enumerated values." 
        DEFVAL{auto-negotiate}
        ::= { rcIfPortMAUEntry 5 } 
        
-- 指定MAU的双工管理状态
     rcIfPortMAUDuplexSet              OBJECT-TYPE
        SYNTAX INTEGER              
        {
            auto-negotiate(1),
            half(2),
            full(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "The desired duplex state of the MAU. Some MAU may not support
              setting the value of this object to some of the enumerated values."
        DEFVAL{auto-negotiate}
        ::= { rcIfPortMAUEntry 6 } 
    
-- 指定MAU的对称流控管理状态
     rcIfPortMAUFlowControlEnable      OBJECT-TYPE
        SYNTAX EnableVar
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "Set symmetric flow control of the MAU to enable(1) or disable(2)."
        DEFVAL{disable}
        ::= { rcIfPortMAUEntry 7 } 
   
-- 指定MAU的接收PAUSE帧流控管理状态
     rcIfPortMAUFlowControlRecvEnable   OBJECT-TYPE
        SYNTAX EnableVar
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "Set the flow control in receiving direction to enable(1) or disable(2)."
        DEFVAL{ disable }
        ::= { rcIfPortMAUEntry 8 } 

-- 指定MAU的发送PAUSE帧流控管理状态
     rcIfPortMAUFlowControlSendEnable   OBJECT-TYPE
        SYNTAX EnableVar
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "Set the flow control in sending direction to enable(1) or disable(2)."
        DEFVAL{ disable }
        ::= { rcIfPortMAUEntry 9 } 
  
-- 指定MAU的MDI线序管理状态
     rcIfPortMAUMdiMode                  OBJECT-TYPE
        SYNTAX INTEGER
        {
            auto-detect(1),
            normal(2),
            xover(3)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "The desired automatic MDI crossover mode of the MAU. Some MAU may 
             not support setting the value of this object to some of the 
             enumerated values."
        DEFVAL{ auto-detect }
        ::= { rcIfPortMAUEntry 10 } 
           
-- 指定MAU的MDI线序管理状态
     rcIfPortMAUStatus                   OBJECT-TYPE
        SYNTAX INTEGER
        {
            active(1),
            suspend(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
             "The actual state of the MAU. In a combo port, only one MAU 
             in the port can operate in active state. This object dose not 
             support writing operation yet!"
        ::= { rcIfPortMAUEntry 11 }
         
-- 指定MAU的端口SFP连接类型         
    rcIfPortMAUSfpPortType OBJECT-TYPE
        SYNTAX INTEGER{   
                      autodetect(0),  
                      copper(1),  
                      fiber100(2),
                      fiber1000(3),
                      fiber10000(4)
                    }
        MAX-ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "The SFP fiber mode admin state."
        ::= { rcIfPortMAUEntry 12 }     
        
-- 指定MAU的端口EEE-Auto模式        
    rcIfPortEEEAutoMode OBJECT-TYPE
        SYNTAX INTEGER{   
                      not-support(0),
                      enable(1),
                      disable(2)
                    }
        MAX-ACCESS read-write
        STATUS mandatory
        DESCRIPTION
            "EEE-Auto Admin Mode."
        ::= { rcIfPortMAUEntry 13 }  
        
--Combo port table         
    rcComboMediaTable OBJECT-TYPE
        SYNTAX SEQUENCE OF RcComboMediaEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table of Combo port and associated properties."
        ::= { rcIfPortPHYInfomation 3 }

    rcComboMediaEntry OBJECT-TYPE
        SYNTAX RcComboMediaEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Table entry for Combo media status information."
        INDEX { rcComboPortId, rcComboPortMedia }
        ::= { rcComboMediaTable 1 }
 
    RcComboMediaEntry ::= SEQUENCE {
        rcComboPortId           	INTEGER,
        rcComboPortMedia			INTEGER,
        rcComboPortDescription 		OCTET STRING,
        rcComboPortSpeed	    INTEGER,
				rcComboPortDuplex	    INTEGER,		
				rcComboPortFlowCtrl         EnableVar,
				rcComboPortSendFlowCtrl     EnableVar,
				rcComboPortRecvFlowCtrl     EnableVar,
				rcComboPortMdiXMode         INTEGER		
	    }      
     
   	rcComboPortId OBJECT-TYPE
        SYNTAX INTEGER 
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An index based 1 that uniquely identifies a Ether like interface."
        ::= { rcComboMediaEntry 1 } 
        
--端口combo类型       
   	rcComboPortMedia OBJECT-TYPE
        SYNTAX INTEGER{    
                       not-support(0),
                       fiber(1),
                       copper(2)
        } 
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An index based 1 that uniquely identifies a Ether like interface."
        ::= { rcComboMediaEntry 2 }
        
--端口combo描述             
   	rcComboPortDescription OBJECT-TYPE
        SYNTAX OCTET STRING(SIZE(1..64))
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The description of a combo interface of the swtich."  
        ::= { rcComboMediaEntry 3 }

--端口combo口速率配置   
		rcComboPortSpeed OBJECT-TYPE
        SYNTAX INTEGER{  
                       not-support(0),
                       Auto-negotiate(1),
                       speed-10M(2),
                       speed-100M(3),
                       speed-1000M(4)                      
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The configurated speed for this interface."
        DEFVAL  { 1 }
        ::= { rcComboMediaEntry 4 }
        
--端口combo口双工配置          
   	rcComboPortDuplex OBJECT-TYPE
        SYNTAX INTEGER{     
                       not-support(0),
                       auto-negotiate(1), 
                       half (2), 
                       full (3)                    
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The configurated duplex for this interface."
        DEFVAL  { 1 }
        ::= { rcComboMediaEntry 5 }

--端口combo口对称流控配置                            
   	rcComboPortFlowCtrl OBJECT-TYPE
         SYNTAX INTEGER{  
                      not-support(0),
                      enable(1),
                      disable(2),
                      
                      }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The switch of the flow control on both direction."
        ::= { rcComboMediaEntry 6 } 

--端口combo口发送流控配置 
   	rcComboPortSendFlowCtrl OBJECT-TYPE
         SYNTAX INTEGER{  
                      not-support(0),
                      enable(1),
                      disable(2),
                      
                      }

        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The switch of the flow control on send direction."
        ::= { rcComboMediaEntry 7 }

--端口combo口接收流控配置        
   	rcComboPortRecvFlowCtrl OBJECT-TYPE
        SYNTAX INTEGER{  
                      not-support(0),
                      enable(1),
                      disable(2),
                      
                      }

        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The switch of the flow control on receive direction."
        ::= { rcComboMediaEntry 8 } 

--端口combo口mdi配置         
   	rcComboPortMdiXMode OBJECT-TYPE
        SYNTAX INTEGER{  
                      not-support(0),
                      auto(1),
                      normal(2),
                      xover(3)
                      }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "Automatic MDI Crossover mode of a port/PHY." 
        DEFVAL  { auto }    
        ::= { rcComboMediaEntry 9 }

END