--MibName=rcIgmpSnoop SWITCH-IGMPSNOOP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI RowStatus,TruthValue FROM SNMPv2-TC PortList,Vlanset,EnableVar FROM SWITCH-TC dot1qVlanIndex, dot1qStaticMulticastAddress, dot1qStaticMulticastReceivePort FROM Q-BRIDGE-MIB iscomSwitch FROM RAISECOM-BASE-MIB; rcIgmpSnoop MODULE-IDENTITY LAST-UPDATED "0412200000Z" ORGANIZATION "raisecom Group" CONTACT-INFO " Phone: 01082884499 Email: support@raisecom.com" DESCRIPTION "The MIB module for igmp snooping." REVISION "0412200000Z" DESCRIPTION "" ::= { iscomSwitch 11} ------------------------------------------------------------------------------ -- -- rcCommonIgmpSnoop - IGMP Snooping Parameters -- -- This group is used to instrument the Layer 2 IGMP Snooping support. -- ------------------------------------------------------------------------------ -- rcIgmpSnoopEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { enabled:all } Setting this object to enabled(1) enables IGMP Snooping. Setting it to disabled(2) disables IGMP Snooping. Note that IGMP Snooping can function with or without GVRP and GMRP enabled." DEFVAL {enable} ::= { rcIgmpSnoop 1 } rcIgmpSnoopAlerts OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { false } Setting this object to true(1) enables the IP Router Alert Option (as defined in RFC2113) for transmitted IGMP packets. Setting it to false(2) disables this option." ::= { rcIgmpSnoop 2 } rcIgmpSnoopAging OBJECT-TYPE SYNTAX Integer32 (0|30..3600) UNITS "second" MAX-ACCESS read-write STATUS current DESCRIPTION "DURABLE: { 300 } The timeout period in seconds for aging out Multicast Groups dynamically learned with IGMP Snooping. Note that aging operates on a per interface per VLAN per multicast group basis. 0 means never aging" ::= { rcIgmpSnoop 3 } rcIgmpSnoopVlan OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled/disabled status of igmp snooping of vlan." ::= { rcIgmpSnoop 4 } rcIgmpSnoopLeave OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled/disabled status of igmp snooping immediate leave of vlan." ::= { rcIgmpSnoop 5 } rcIgmpSnoopFilter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "true indicates forward all unregistered multicast; false indicates filter all unregistered multicast" ::= { rcIgmpSnoop 6 } -- rcIgmpSnoopTable:multicast based on mac address,rfc2674q -- rcIgmpSnoopTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpSnoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table, which provides IGMP Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674)." ::= { rcIgmpSnoop 7 } rcIgmpSnoopEntry OBJECT-TYPE SYNTAX RcIgmpSnoopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Displays by VLAN, Multicast Group, and Multicast receive port the set of ports enabled to forward Multicast Group traffic as determined by the IGMP Snooping task." INDEX { dot1qVlanIndex, dot1qStaticMulticastAddress, dot1qStaticMulticastReceivePort } ::= { rcIgmpSnoopTable 1 } RcIgmpSnoopEntry ::= SEQUENCE { rcIgmpSnoopEgressPorts PortList } rcIgmpSnoopEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted that the IGMP Snooping task generates a pseudo- static (i.e., not saved in NVM) port list similar to the RFC2674 Q-MIB 'dot1qStaticMulticastStaticEgressPorts' object. Consequently, a port will not be a member of 'rcCommonIgmpSnoopEgressPorts' if it is a member of 'dot1qStaticMulticastForbiddenEgressPorts'." ::= { rcIgmpSnoopEntry 1 } -- rcIgmpSnoopMrouterTable -- rcIgmpSnoopMrouterTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpSnoopMrouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table, which provides IGMP Snooping information, whitch is multicast router port." ::= { rcIgmpSnoop 8 } rcIgmpSnoopMrouterEntry OBJECT-TYPE SYNTAX RcIgmpSnoopMrouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Displays by VLAN and Multicast router port." INDEX { rcIgmpSnoopMrouterVlan, rcIgmpSnoopMrouterPort } ::= { rcIgmpSnoopMrouterTable 1 } RcIgmpSnoopMrouterEntry ::= SEQUENCE { rcIgmpSnoopMrouterVlan INTEGER, rcIgmpSnoopMrouterPort INTEGER, rcIgmpSnoopMrouterStatus RowStatus } rcIgmpSnoopMrouterVlan OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "the multicast router vlan." ::= { rcIgmpSnoopMrouterEntry 1 } rcIgmpSnoopMrouterPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "the multicast router port ." ::= { rcIgmpSnoopMrouterEntry 2 } rcIgmpSnoopMrouterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "the status of multicast router." ::= { rcIgmpSnoopMrouterEntry 3 } -- rcIgmpSnoopStaticMulticastTable:multicast based on ip address -- rcIgmpSnoopStaticMulticastTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIgmpSnoopStaticMulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing filtering information for Multicast and Broadcast IP addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only." ::= { rcIgmpSnoop 9 } rcIgmpSnoopStaticMulticastEntry OBJECT-TYPE SYNTAX RcIgmpSnoopStaticMulticastEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded." INDEX { dot1qVlanIndex, rcIgmpSnoopStaticMulticastAddress } ::= { rcIgmpSnoopStaticMulticastTable 1 } RcIgmpSnoopStaticMulticastEntry ::= SEQUENCE { rcIgmpSnoopStaticMulticastAddress IpAddress, rcIgmpSnoopStaticMulticastStaticEgressPorts PortList, rcIgmpSnoopStaticMulticastStatus INTEGER } rcIgmpSnoopStaticMulticastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address." ::= { rcIgmpSnoopStaticMulticastEntry 1 } rcIgmpSnoopStaticMulticastStaticEgressPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast IP address must be forwarded, regardless of any dynamic information e.g. from GMRP. The default value of this object is a string of ones of appropriate length." ::= { rcIgmpSnoopStaticMulticastEntry 2 } rcIgmpSnoopStaticMulticastStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), permanent(3), deleteOnReset(4), deleteOnTimeout(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out." DEFVAL { permanent } ::= { rcIgmpSnoopStaticMulticastEntry 3 } END