-- File: RC002-REMOTE-DEVICE-MIB.my -- Changes: -- author:SunSuli -- remote card including RC952-EE1,RC952-FXE1,RC601,RC501,RC511 RC002-REMOTE-DEVICE-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32,Counter32,Unsigned32 FROM SNMPv2-SMI DisplayString, TimeStamp FROM SNMPv2-TC rcftChassisIndex, rcftSlotIndex,rcftMibObjects FROM RAISECOM-RCFT-MIB; rcftRemoteDeviceMib MODULE-IDENTITY LAST-UPDATED "1203021725Z" ORGANIZATION "RaiseCom Technology CO.,LTD" CONTACT-INFO " www.raisecom.com " DESCRIPTION "MIB for RC002 Remote Device equipment." REVISION "0507040000Z" DESCRIPTION "" REVISION "0901090000Z" DESCRIPTION " rcftRemoteE1PortStatus add defination for BIT19; rcftRemoteDeviceStatus add defination for BIT10-BIT16; add node:rcftRemoteDeviceApsWaitToRestore; add trap:rcftRemoteDevSPChannelTrap,rcftRemoteDevPSChannelTrap; in rcftRemoteE1Balance:replace (2)unbalance by (2)imbalance --by sunying" REVISION "0901210000Z" DESCRIPTION " add node:rcftRemoteDeviceProductType,rcftRemoteDeviceProtocolVer,rcftRemoteDeviceVenderCode; rcftRemoteEthFxPortStatus增加对bit5-bit7的定义; rcftRemoteEthFxOrder增加枚举24; --by sunying" REVISION "0902090000Z" DESCRIPTION " add node:rcftRemoteDeviceModelID; rcftRemoteDeviceStatus增加对bit17的定义; --by sunying" REVISION "0903170000Z" DESCRIPTION " rcftRemoteEthFxPortStatus 增加对bit8的定义; --by sunying" REVISION "0903240000Z" DESCRIPTION " add node:rcftRemoteDeviceApsE6SwitchDelay,rcftRemoteDeviceApsE3SwitchDelay --by sunying" REVISION "0904150000Z" DESCRIPTION " rcftRemoteDeviceOrder add enum: pdhPortOutsideLoopEnable(17), 将 DESCRIPTION中用到的但是枚举没有列出来的情况补上. StatisticInfoClear(24),统计信息清零 defaultConfigDate(25), 新增恢复出厂默认配置命令 --by kuanglili" REVISION "0905140000Z" DESCRIPTION " rcftRemoteV35PortAlarmStatus 增加对bit12的定义; --by wu yanxiong" REVISION "0905150000Z" DESCRIPTION " rcftRemoteDeviceOrder add enum: portOutsideLoopEnable(17), 上次命名重复. rcftRemoteE1PortStatus:增加bit20/21位定义 --by kuanglili" REVISION "0905190000Z" DESCRIPTION " rcftRemoteEthFxModuleType 和 rcftRemotePdhPortModuleType 中取消了ss3(9) 光头类型 采用公司统一的光头类型(即ss34(9) 、ss35(10)) --by kuanglili" REVISION "0905260000Z" DESCRIPTION " 增加了rcftRemoteV35PortDSRTrap; --by wuyanxiong" REVISION "0905260000Z" DESCRIPTION " 添加RC906G-FE/X-4E1-REMOTE、RC906-FE/X-E1-REMOTE设备类型 --by kuanglili" REVISION "0905271600Z" DESCRIPTION " add rcftRemoteEthFxPortSFPType; --by xujingru" REVISION "0906091600Z" DESCRIPTION " add rcftRemoteDeviceVLANTagDirection、rcftRemoteDeviceVLANTagModule、rcftRemoteDeviceISPTPID rcftRemoteEthFxPortSFPInfo 、rcftRemoteEthFxPortLoopStatus、rcftRemoteEthFxPortInputSignalLosTrap; --by kuanglili" REVISION "0907021600Z" DESCRIPTION " rcftRemoteVideoPortStatus 增加双向视频口的特性 BIT3-BIT7 add rcftRemoteVideoPortSignalInLos视频输入信号丢失告警 rcftRemoteVideoPortSignalOutLos视频输出信号丢失告警 --by wu yanxiong" REVISION "0907171600Z" DESCRIPTION " 添加rcftRemoteE1DS1PortType,用以在ifTable入库等情况下在E1表中 区分E1和DS1接口类型。 --by wu yanxiong" REVISION "0908190000Z" DESCRIPTION " 1、把rcftRemoteE1DS1PortType移置设备级； 2、添加设备级mib节点rcftRemoteDeviceE1FrameChannel、rcftRemoteDeviceManageID； 3、添加远端E1接口级mib节点 rcftRemoteE1CVCnt； 4、修改rcftRemoteEthFeTxRestrictSpeed 注释 为发送带宽 5、添加rcftRemoteE1PortStatus BIT22 网管通道模式 位 6、添加rcftRemoteE1ClockMode 枚举值 3：透传 4：E1接收 7、rcftRemoteE1BertStatus 属性 read-write 8、增加rcftRemoteEthFxPortStatus bit9: 光口的位置属性。 --by wu yanxiong" REVISION "0908211600Z" DESCRIPTION " add rcftRemoteEthFxPortRxRestrictSpeed、rcftRemoteEthFxPortTxRestrictSpeed、 rcftRemoteEthFxSFPDiagnoWarningStatus 和相应的预警; --by kuanglili" REVISION "0909021000Z" DESCRIPTION " add device type: rcftTypeRC521H-FE-DoubleFiber-S(20073), --双纤台式 rcftTypeRC521H-FE-SingleFiber-S(20074), --单纤台式 --by xujingru " REVISION "0909081430Z" DESCRIPTION " add device type: rcftTypeRC521H-FE-S(20075), --by xujingru " REVISION "0909091130Z" DESCRIPTION " add device type: rcftTypeRCMS2802-60FX-SLAVE-REV-A(22084), --by kuanglili " REVISION "0909091630Z" DESCRIPTION " 去掉 rcftRemoteEthFxPortStatus bit9: 光口的位置属性。 改为独立节点 rcftRemoteEthFxPortLineOrClient --by wuyanxiong " REVISION "0909180000Z" DESCRIPTION " 增加64位 流量统计节点 rcftRemoteEthFx64RxBytes Counter64 rcftRemoteEthFx64TxBytes Counter64 --by wuyanxiong " REVISION "0909270000Z" DESCRIPTION " rcftRemoteEthFxModuleType 和 rcftRemotePdhPortModuleType 中 增加了SFP(15) 光头类型，按照公司统一的光头类型 --by wuyanxiong " REVISION "0910301006Z" DESCRIPTION " 增加64位 rcftRemoteEthFxCOS --by kuanglili " REVISION "0912210000Z" DESCRIPTION " 根据RCVS1000-501BL等设备的mib编程说明及代码，断定 rcftRemoteVideoPortStatus bit 0 原枚举值有误，更正为 0：正常；1：告警 --by wuyanxiong " REVISION "1003030000Z" DESCRIPTION " add remote device rcftRemoteDeviceMibUse --by wuyanxiong " REVISION "1003040000Z" DESCRIPTION " add device type: rcftTypeRC552-FE-REV-B(21007), --by wuyanxiong " REVISION "1003100000Z" DESCRIPTION " 修改rcftRemoteDeviceMibUse枚举值，从1开始 { mib002(1), rccomlib(2) } --by wuyanxiong " REVISION "1009290950Z" DESCRIPTION " add subcard moudle type: e-SUBM-2E1-A, --by yangbintao " REVISION "1010221657Z" DESCRIPTION " 添加远端配置信息表rcftRemoteEthFePortConfTable,用于配置信息的显示和配置 其中添加配置信息表入口rcftRemoteEthFePortConfEntry,同时定义两个节点： rcftRemoteEthFeConfSpeed rcftRemoteEthFeConfDuplex --by yangbintao " REVISION "1011150000Z" DESCRIPTION " 1、add subcard moudle type: rcftTypeRCMS2902-120LFE-REMOTE(62589), ---对应设备类型0xF47D rcftTypeRCMS2902-240LFE-REMOTE(62592), ---对应设备类型0xF480 rcftTypeRCMS2902-60FE-REMOTE(62595), ---对应设备类型0xF483 rcftTypeRC862-60-REMOTE(62598), ---对应设备类型0xF486 rcftTypeRC862-30-REMOTE(62603), ---对应设备类型0xF48B rcftTypeRCMS2911-480FE(62607), ---对应设备类型0xF48F rcftTypeRCMS2912-480FE-REMOTE(62611), ---对应设备类型0xF493 rcftTypeRCMS2912-240FE-REMOTE(62615), ---对应设备类型0xF497 rcftTypeRCMS2901-480EFE(62616), ---对应设备类型0xF498 rcftTypeRC861-480E(62618), ---对应设备类型0xF49A 2、修改设备名称RCMS2912-8/4T1E1GE 改为 RCMS2912-8/4E1T1GE --by wuyanxiong " REVISION "1112191725Z" DESCRIPTION " add rcftRemoteDeviceStatus 18 and 19 enum --by yangbintao " REVISION "1203020000Z" DESCRIPTION " 1、rcftRemoteMoudleV35Status 定义BIT8-BIT11; --by wuyanxiong " ::= { rcftMibObjects 6 } --对象定义 rcftRemoteDeviceSystemMIB OBJECT IDENTIFIER ::= { rcftRemoteDeviceMib 1 } rcftRemoteDeviceSysObjects OBJECT IDENTIFIER ::= { rcftRemoteDeviceSystemMIB 1 } rcftRemoteDeviceSysTraps OBJECT IDENTIFIER ::={ rcftRemoteDeviceSystemMIB 2} rcftRemoteDeviceEthMIB OBJECT IDENTIFIER ::= { rcftRemoteDeviceMib 2 } rcftRemoteDeviceEthFeMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceEthMIB 1} rcftRemoteDeviceEthFeObjects OBJECT IDENTIFIER ::={rcftRemoteDeviceEthFeMIB 1} rcftRemoteDeviceEthFeTraps OBJECT IDENTIFIER ::={rcftRemoteDeviceEthFeMIB 2} rcftRemoteDeviceEthFxMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceEthMIB 2} rcftRemoteDeviceEthFxObjects OBJECT IDENTIFIER ::={rcftRemoteDeviceEthFxMIB 1} rcftRemoteDeviceEthFxTraps OBJECT IDENTIFIER ::={rcftRemoteDeviceEthFxMIB 2} rcftRemoteDeviceEthFxPerformance OBJECT IDENTIFIER ::={rcftRemoteDeviceEthFxMIB 3} rcftRemoteDeviceE1MIB OBJECT IDENTIFIER ::= { rcftRemoteDeviceMib 3 } rcftRemoteDeviceE1Objects OBJECT IDENTIFIER ::={rcftRemoteDeviceE1MIB 1} rcftRemoteDeviceE1Traps OBJECT IDENTIFIER ::={rcftRemoteDeviceE1MIB 2} rcftRemoteDeviceSHDSLMIB OBJECT IDENTIFIER ::= { rcftRemoteDeviceMib 4 } rcftRemoteSHDSLPortObjects OBJECT IDENTIFIER ::={rcftRemoteDeviceSHDSLMIB 1} rcftRemoteSHDSLPortPerformance OBJECT IDENTIFIER ::={rcftRemoteDeviceSHDSLMIB 2} rcftRemoteSHDSLPortTraps OBJECT IDENTIFIER ::={rcftRemoteDeviceSHDSLMIB 10} rcftRemoteDeviceV35MIB OBJECT IDENTIFIER ::= { rcftRemoteDeviceMib 5 } rcftRemoteV35PortObjects OBJECT IDENTIFIER ::={rcftRemoteDeviceV35MIB 1} rcftRemoteV35PortPerformance OBJECT IDENTIFIER ::={rcftRemoteDeviceV35MIB 2} rcftRemoteV35PortTraps OBJECT IDENTIFIER ::={rcftRemoteDeviceV35MIB 3} --------------------------DS3 E3端口------------------------------------ rcftRemoteDS3E3PortMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 6} rcftRemoteDS3E3PortObjects OBJECT IDENTIFIER ::= {rcftRemoteDS3E3PortMIB 1} rcftRemoteDS3E3PortPerformance OBJECT IDENTIFIER ::= {rcftRemoteDS3E3PortMIB 2} rcftRemoteDS3E3PortTraps OBJECT IDENTIFIER ::= {rcftRemoteDS3E3PortMIB 10} --------------------------pdh端口------------------------------------ rcftRemotePdhPortMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 7} rcftRemotePdhPortObjects OBJECT IDENTIFIER ::= {rcftRemotePdhPortMIB 1} rcftRemotePdhPortPerformance OBJECT IDENTIFIER ::= {rcftRemotePdhPortMIB 2} rcftRemotePdhPortTraps OBJECT IDENTIFIER ::= {rcftRemotePdhPortMIB 10} --------------------------DS1端口------------------------------------ rcftRemoteDS1PortMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 8} rcftRemoteDS1PortObjects OBJECT IDENTIFIER ::= {rcftRemoteDS1PortMIB 1} rcftRemoteDS1PortPerformance OBJECT IDENTIFIER ::= {rcftRemoteDS1PortMIB 2} rcftRemoteDS1PortTraps OBJECT IDENTIFIER ::= {rcftRemoteDS1PortMIB 10} --------------------------子卡------------------------------------ rcftRemoteMoudleMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 9} rcftRemoteMoudle OBJECT IDENTIFIER ::= {rcftRemoteMoudleMIB 1} rcftRemoteMoudleObjects OBJECT IDENTIFIER ::= {rcftRemoteMoudle 1} rcftRemoteMoudleTraps OBJECT IDENTIFIER ::= {rcftRemoteMoudle 10} rcftRemoteMoudleEthFe OBJECT IDENTIFIER ::= {rcftRemoteMoudleMIB 2} rcftRemoteMoudleEthFeObjects OBJECT IDENTIFIER ::= {rcftRemoteMoudleEthFe 1} rcftRemoteMoudleEthFePerformance OBJECT IDENTIFIER ::= {rcftRemoteMoudleEthFe 2} rcftRemoteMoudleEthFeTraps OBJECT IDENTIFIER ::= {rcftRemoteMoudleEthFe 10} rcftRemoteMoudlePdh OBJECT IDENTIFIER ::= {rcftRemoteMoudleMIB 3} rcftRemoteMoudlePdhObjects OBJECT IDENTIFIER ::= {rcftRemoteMoudlePdh 1} rcftRemoteMoudlePdhTraps OBJECT IDENTIFIER ::= {rcftRemoteMoudlePdh 10} rcftRemoteMoudleE1 OBJECT IDENTIFIER ::= {rcftRemoteMoudleMIB 4} rcftRemoteMoudleE1Objects OBJECT IDENTIFIER ::= {rcftRemoteMoudleE1 1} rcftRemoteMoudleE1Performance OBJECT IDENTIFIER ::= {rcftRemoteMoudleE1 2} rcftRemoteMoudleE1Traps OBJECT IDENTIFIER ::= {rcftRemoteMoudleE1 10} rcftRemoteMoudleV35 OBJECT IDENTIFIER ::= {rcftRemoteMoudleMIB 5} rcftRemoteMoudleV35Objects OBJECT IDENTIFIER ::= {rcftRemoteMoudleV35 1} rcftRemoteMoudleV35Traps OBJECT IDENTIFIER ::= {rcftRemoteMoudleV35 10} --------------------------AUDIO端口------------------------------------ rcftRemoteAudioPortMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 10} rcftRemoteAudioPortObjects OBJECT IDENTIFIER ::= {rcftRemoteAudioPortMIB 1} rcftRemoteAudioPortPerformance OBJECT IDENTIFIER ::= {rcftRemoteAudioPortMIB 2} rcftRemoteAudioPortTraps OBJECT IDENTIFIER ::= {rcftRemoteAudioPortMIB 10} -----------------------Video 视频口-------------------------------- rcftRemoteVideoPortMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 11} rcftRemoteVideoPortObjects OBJECT IDENTIFIER ::= {rcftRemoteVideoPortMIB 1} rcftRemoteVideoPortPerformance OBJECT IDENTIFIER ::= {rcftRemoteVideoPortMIB 2} rcftRemoteVideoPortTraps OBJECT IDENTIFIER ::= {rcftRemoteVideoPortMIB 10} ----------------------Data 数据口--------------------------------- rcftRemoteDataPortMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 12} rcftRemoteDataPortObjects OBJECT IDENTIFIER ::= {rcftRemoteDataPortMIB 1} rcftRemoteDataPortPerformance OBJECT IDENTIFIER ::= {rcftRemoteDataPortMIB 2} rcftRemoteDataPortTraps OBJECT IDENTIFIER ::= {rcftRemoteDataPortMIB 10} ----------------------SimpleModule数据口--------------------------------- rcftRemoteSimpleModuleMIB OBJECT IDENTIFIER ::= {rcftRemoteDeviceMib 13} rcftRemoteSimpleModuleObjects OBJECT IDENTIFIER ::= {rcftRemoteSimpleModuleMIB 1} rcftRemoteSimpleModulePerformance OBJECT IDENTIFIER ::= {rcftRemoteSimpleModuleMIB 2} rcftRemoteSimpleModuleTraps OBJECT IDENTIFIER ::= {rcftRemoteSimpleModuleMIB 10} -------------------VLAN MIB---------------------------------------- rcftRemoteVLANMIB OBJECT IDENTIFIER ::= { rcftRemoteDeviceMib 14 } rcftRemoteVLANObjects OBJECT IDENTIFIER ::= {rcftRemoteVLANMIB 1} ---------------------- FPGA 或交换芯片 流量统计 ---------------------- rcftRemotePerformaceMib OBJECT IDENTIFIER ::={rcftRemoteDeviceMib 15} rcftRemoteStatisticPerformance OBJECT IDENTIFIER ::={rcftRemotePerformaceMib 1} ----------------------VCG MIB------------------------- rcftRemoteVCGMib OBJECT IDENTIFIER ::={rcftRemoteDeviceMib 16} rcftRemoteVCGObjects OBJECT IDENTIFIER ::={rcftRemoteVCGMib 1} rcftRemoteVCGPerformance OBJECT IDENTIFIER ::={rcftRemoteVCGMib 2} rcftRemoteVCGTraps OBJECT IDENTIFIER ::={rcftRemoteVCGMib 10} -- 系统配置表 rcftRemoteDeviceSysTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDeviceSysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device System table. " ::= { rcftRemoteDeviceSysObjects 1 } rcftRemoteDeviceSysEntry OBJECT-TYPE SYNTAX RcftRemoteDeviceSysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the rc952 system table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex } ::= { rcftRemoteDeviceSysTable 1 } RcftRemoteDeviceSysEntry ::= SEQUENCE { rcftRemoteDeviceIndex Integer32, rcftRemoteDeviceExist INTEGER, rcftRemoteDeviceType INTEGER, rcftRemoteDeviceLocalPortType INTEGER, rcftRemoteDeviceLocalPortIndex INTEGER, rcftRemoteDeviceVersionInfo OCTET STRING, rcftRemoteSysTemperature INTEGER, rcftRemoteSysVoltageStatus INTEGER, rcftRemoteDeviceWorkMode INTEGER, rcftRemoteDeviceFrameLen INTEGER, rcftRemoteDeviceOrder INTEGER, rcftRemoteDeviceConfigFlag INTEGER, rcftRemoteSlotAutoCutErrLineEn INTEGER, rcftRemotePowerSupply INTEGER, rcftRemoteDevicePowerDown INTEGER, rcftRemoteDeviceClkMode INTEGER, rcftRemoteDeviceE1SubCardType INTEGER, rcftRemoteDeviceGateway OCTET STRING, rcftRemoteDeviceIP OCTET STRING, rcftRemoteDeviceSubnetMask OCTET STRING, rcftRemoteDeviceVLANID INTEGER, rcftRemoteDeviceCommunityRW INTEGER, rcftRemoteDeviceCommunityLength INTEGER, rcftRemoteDeviceCommunity OCTET STRING, rcftRemoteDeviceVoltageValue Unsigned32, rcftRemoteDeviceStatus INTEGER, rcftRemoteSubModuleExist INTEGER, rcftRemoteMultiE1LoopOrder OCTET STRING, rcftRemoteOrderTimeParameter INTEGER, rcftRemoteOrderModeParameter INTEGER, rcftRemoteSDRAMBuf INTEGER, rcftRemoteRLPStatus INTEGER, rcftRemoteLALStatus INTEGER, rcftRemoteRALStatus INTEGER, rcftRemoteDeviceSwitchStatus INTEGER, rcftRemoteDeviceMoudleExist INTEGER, rcftRemoteCardInformation OCTET STRING, rcftRemoteSwitchType INTEGER, rcftRemoteConnectMode INTEGER, rcftRemoteQosEnable INTEGER, rcftRemoteBaseCOS INTEGER, rcftRemoteDSCP OCTET STRING, rcftRemoteQueuesPolicy INTEGER, rcftRemoteMultiE1AlarmRejectOrder OCTET STRING, rcftRemoteT1PortPulseWaveForm INTEGER, rcftRemoteT1PortCodeType INTEGER, rcftRemoteDeviceSabitMode INTEGER, rcftRemoteDeviceApsWaitToRestore INTEGER, rcftRemoteDeviceCLKChannel INTEGER, rcftRemoteDeviceRmcChannelType INTEGER, rcftRemoteDeviceProductType OCTET STRING, rcftRemoteDeviceProtocolVer INTEGER, rcftRemoteDeviceVenderCode INTEGER, rcftRemoteDeviceModelID INTEGER, rcftRemoteE1PortNumber INTEGER, rcftRemoteDeviceVLANType INTEGER, rcftRemoteDeviceQoSPolicy INTEGER, rcftRemoteDeviceApsE3SwitchDelay INTEGER, rcftRemoteDeviceApsE6SwitchDelay INTEGER, rcftRemoteDeviceVLANTagDirection INTEGER, rcftRemoteDeviceVLANTagModule INTEGER, rcftRemoteDeviceISPTPID INTEGER, rcftRemoteE1DS1PortType INTEGER, rcftRemoteDeviceE1FrameChannel INTEGER, rcftRemoteDeviceManageID INTEGER, rcftRemoteDeviceMibUse INTEGER } rcftRemoteDeviceIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备的索引 " ::= { rcftRemoteDeviceSysEntry 1 } rcftRemoteDeviceExist OBJECT-TYPE SYNTAX INTEGER { exist(1), noexist(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备是否在位 " ::= { rcftRemoteDeviceSysEntry 2 } rcftRemoteDeviceType OBJECT-TYPE SYNTAX INTEGER { rcftTypeRCMS2802-240GE-REV-A-REMOTE(5394), -- RC006设备，只能做rc002的一级远端，RCMS2802-120/240LGE-BL(B)作为局端 rcftTypeRC501-FE-REV-C(20001), rcftTypeRC601-FE-REV-C(20002), rcftTypeRC511-FE-REV-A(20003), rcftTypeRC952-FEE1-REV-A(20004), rcftTypeRC952-FXE1-REV-A(20005), rcftTypeRC601-FE-REV-E(20006), rcftTypeRC511-4FE-REV-A(20007), rcftTypeRC511-FE-C-REV-A(20008), rcftTypeRC951-FEE1-REV-A(20009), rcftTypeRC513-FE-REV-A(20010), rcftTypeRC513-FE-C-REV-A(20011), rcftTypeRC954-FE4E1-REV-A(20012), rcftTypeRC954-FX4E1-REV-A(20013), rcftTypeRC953-FE4E1-REV-A(20014), rcftTypeRC953-FX4E1-REV-A(20015), rcftTypeRC953-FE8E1-REV-A(20016), rcftTypeRC953-FX8E1-REV-A(20017), rcftTypeRC953-FE8E1-BL-REV-A(20018), rcftTypeRC953-FX8E1-BL-REV-A(20019), rcftTypeRC532-FE-REV-A(20020), rcftTypeRC531-FE-REV-A(20021), rcftTypeRC532-2FE-REV-A(20022), rcftTypeRC1102-E1-SLAVE-REV-B1(20023), --增加了性能统计的新协议 rcftTypeRC1102-E1-SLAVE-BL-REV-A1(20024),--增加了性能统计的新协议 rcftTypeRC954-2FE4E1-BL-REV-A(20025), rcftTypeRC954-FE4E1-BL-REV-A(20026), rcftTypeRC954-FX4E1-BL-REV-A(20027), rcftTypeRC954-2FE8E1-BL-REV-A(20028), rcftTypeRC1102-V35-REV-A1(20029), ---增加了误码测试和性能统计 rcftTypeRC1102-V35-REV-B(20030), ---增加v35接收时钟自适应和v35速率配置 rcftTypeRC602-GEF-REV-B(20031), --光口用sfp rcftTypeRC802-DS3E3-REV-A(20032), rcftTypeE-SUBM-FE4E1-A(20033), rcftTypeRC954-FE8E1-REV-A(20034), rcftTypeRC1102-E1-REV-B2(20035), --增加了误码测试的新协议 rcftTypeRC1102-E1-BL-REV-A2(20036), --增加了误码测试的新协议 rcftTypeRC952-FE-DS3E3-REV-A-SLAVE(20037), rcftTypeRC802-DS1-REV-A-SLAVE(20038), rcftTypeRC952-FE-DS1-REV-A-SLAVE(20039), rcftTypeRC952-FE-DS3E3-F-REV-A-SLAVE(20040),------增加了DS3E3成帧、线路编码、传输距离 rcftTypeRC852-30-SLAVE-REV-B(20041), rcftTypeRC951-4FEE1-REV-A(20042), rcftTypeRC512-FE-REV-A-SLAVE-M(20043), rcftTypeRC512-FE-REV-A-SLAVE-S1(20044), rcftTypeRC512-FE-REV-A-SLAVE-S2(20045), rcftTypeRC512-FE-REV-A-SLAVE-S3(20046), rcftTypeRC512-FE-REV-A-SLAVE-noOptical(20047), ------拨码到这里时，显示光口类型为空 rcftTypeRC512-FE-REV-A-SLAVE-SS13(20048), rcftTypeRC512-FE-REV-A-SLAVE-SS23(20049), rcftTypeRC512-FE-REV-A-SLAVE-SS34(20050), rcftTypeRC512-FE-REV-A-S-M(20051), rcftTypeRC512-FE-REV-A-S-S1(20052), rcftTypeRC512-FE-REV-A-S-S2(20053), rcftTypeRC512-FE-REV-A-S-S3(20054), rcftTypeRC512-FE-REV-A-S-noOptical(20055), rcftTypeRC512-FE-REV-A-S-SS13(20056), rcftTypeRC512-FE-REV-A-S-SS23(20057), rcftTypeRC512-FE-REV-A-S-SS34(20058), ------当前不支持 rcftTypeRC512-FE-REV-A-C-M(20059), rcftTypeRC512-FE-REV-A-C-S1(20060), rcftTypeRC512-FE-REV-A-C-S2(20061), rcftTypeRC512-FE-REV-A-C-S3(20062), rcftTypeRC512-FE-REV-A-C-noOptical(20063), ------拨码到这里时，显示光口类型为空 rcftTypeRC512-FE-REV-A-C-SS13(20064), rcftTypeRC512-FE-REV-A-C-SS23(20065), rcftTypeRC512-FE-REV-A-C-SS34(20066), rcftTypeRC952-FXE1-REV-C-SLAVE(20067), rcftTypeRC511-4FE-REV-B-SLAVE(20068), rcftTypeRC952-FEE1-REV-B-REMOTE(20069), --对应硬件b版的移动模式 ，硬件b版的其他模式同a版 rcftTypeRC906H-FEE1-REMOTE-PRIVATE(20070), rcftTypeRC521H-FE-DoubleFiber-S(20073), --双纤台式 rcftTypeRC521H-FE-SingleFiber-S(20074), --单纤台式 rcftTypeRC521H-FE-S(20075), rcftTypeRC522E-FE-REMOTE(20076), rcftTypeRC521E-FE(20077), rcftTypeRC512-FE(20078), --对于B版以前未处理的光头类型统一占用的类型号，虚拟的号 rcftTypeRC512-FE-SLAVE(20079), --对于B版以前未处理的光头类型统一占用的类型号，虚拟的号 rcftTypeRC551-FE-REV-A(21001), rcftTypeRC551-GE-REV-A(21002), rcftTypeRC551-4FE-REV-A(21003), rcftTypeRC551-GE-REV-A1(21004), ---和RC551-GE-REV-A相比，增加了SFP数字诊断相关的管理对象 rcftTypeRC552-GE-REV-C(21005), rcftTypeRC954-FX8E1-REV-A(21006), rcftTypeRC552-FE-REV-B(21007), rcftTypeRC831-120-REV-A(22050), ---22000字段的为7017设备 rcftTypeRC831-240-REV-A(22051), rcftTypeRC831-240E-REV-A(22052), rcftTypeRC831-30-FV35-REV-A(22053), rcftTypeRC831-60-FV35-REV-A(22054), rcftTypeRC832-30-SLAVE-REV-A(22055), rcftTypeRC832-30-FV35-SLAVE-REV-A(22056), rcftTypeRC832-60-SLAVE-REV-A(22057), rcftTypeRC832-120L-SLAVE-REV-A(22058), rcftTypeRC832-240L-SLAVE-REV-A(22059), rcftTypeRCMS2801-30FE-FV35-REV-A(22060), rcftTypeRCMS2801-60FE-FV35-REV-A(22061), rcftTypeRCMS2801-120FE-SLAVE-REV-A(22062), rcftTypeRCMS2801-240FE-SLAVE-REV-A(22063), rcftTypeRCMS2801-240EFE-SLAVE-REV-A(22064), rcftTypeRCMS2802-30FE-SLAVE-REV-A(22065), rcftTypeRCMS2802-60FE-SLAVE-REV-A(22066), rcftTypeRCMS2802-120LFE-SLAVE-REV-A(22070), rcftTypeRCMS2802-240LFE-SLAVE-REV-A(22071), rcftTypeRC832-30-FV35-SLAVE-REVB(22072), rcftTypeRC804-30B-S1-SLAVE-REV-A(22073), rcftTypeRC806-30B-S1-SLAVE-REV-A(22074), rcftTypeRC832-30-FV35-SLAVE-REVA1(22075), rcftTypeRC831-30-FV35-SLAVE-REVA1(22076), rcftTypeRC831-60-FV35-SLAVE-REVA1(22077), rcftTypeRCMS2801-30FE-FV35-SLAVE-REVA1(22078), rcftTypeRCMS2801-60FE-FV35-SLAVE-REVA1(22079), rcftTypeRCMS2802-2T1-FE-SLAVE-REV-A(22081), rcftTypeRCMS2802-4T1-FE-SLAVE-REV-A(22082), rcftTypeRCMS2802-8T1-FE-SLAVE-REV-A(22083), rcftTypeRCMS2802-60FX-SLAVE-REV-A(22084), rcftTypeRC1101-FEV35E1-REV-A(25004), --从25000开始是遵循通信约定4的远端板卡类型定义 rcftTypeRC1102-FE-REV-B-SLAVE(25005), rcftTypeRC1102-FE-4W-REV-A-SLAVE(25006), rcftTypeRC1101-FE-V35E1-REV-B(25007), rcftTypeRCMS2802-120LGE-BL-A-SLAVE(26008), --约定4的光端机 rcftTypeRCMS2802-240LGE-BL-A-SLAVE(26011), rcftTypeRCMS2802-60GE-BL-A-SLAVE(26099), rcftTypeRCMS2802-30GE-BL-A-SLAVE(26100), rcftTypeRC906H-FEE1-REV-A-REMOTE(45313), ---对应设备类型0xB101, 管理对象同 RC952-FEE1-REV-B rcftTypeRC906H-FXE1-REV-A-REMOTE(45314), ---对应设备类型0xB102，管理对象同 RC952-FXE1-REV-C rcftTypeRC602-GEF-REV-C(45318), ---对应设备类型0xB104 rcftTypeRC904-PE1-REMOTE(62514), ---对应设备类型0xf432 rcftTypeTHIRD-PARTY-PRODUCT(62128), ---对应设备类型0xf2B0,采用移动标准的第3方产品 rcftTypeRCMS2802-60GE-BL-REV-B-REMOTE(62471), ---对应设备类型0xf407 rcftTypeRCMS2802-120LGE-BL-REV-B-REMOTE(62518), ---对应设备类型0xf436 rcftTypeRCMS2802-240LGE-BL-REV-B-REMOTE(62521), ---对应设备类型0xf439 rcftTypeRC958-FE4E1-REV-A-REMOTE(62526), ---对应设备类型0xF43E rcftTypeRC958-FE8E1-REV-A-REMOTE(62529), ---对应设备类型0xF441 rcftTypeRC958-FX4E1-REV-A-REMOTE(62533), ---对应设备类型0xF445 rcftTypeRC958-FX8E1-REV-A-REMOTE(62536), ---对应设备类型0xF448 rcftTypeRC958-FEE1-REV-A-REMOTE(62543), ---对应设备类型0xF445 rcftTypeRC958-FXE1-REV-A-REMOTE(62546), ---对应设备类型0xF448 rcftTypeRC906G-FE4E1-REMOTE(62550), ---对应设备类型0xF456 rcftTypeRC906G-FX4E1-REMOTE(62553), ---对应设备类型0xF459 rcftTypeRC906G-FEE1-REMOTE(62557), ---对应设备类型0xF45D rcftTypeRC906G-FXE1-REMOTE(62560), ---对应设备类型0xF460 rcftTypeRC906G-FE8E1-REMOTE(62563), ---对应设备类型0xF463 rcftTypeRC906G-FX8E1-REMOTE(62567), ---对应设备类型0xF467 rcftTypeRC908-FEV35-REV-A-REMOTE(62540), ---对应设备类型0xf44c rcftTypeRCVS1000-901UL-REMOTE(62571), ---对应设备类型0xF46B rcftTypeRCMS2912-4E1T1GE-REV-A(62575), ---对应设备类型0xF46F rcftTypeRCMS2912-8E1T1GE-REV-A(62578), ---对应设备类型0xF472 rcftTypeRCMS2902-120LFE-REMOTE(62589), ---对应设备类型0xF47D rcftTypeRCMS2902-240LFE-REMOTE(62592), ---对应设备类型0xF480 rcftTypeRCMS2902-60FE-REMOTE(62595), ---对应设备类型0xF483 rcftTypeRC862-60-REMOTE(62598), ---对应设备类型0xF486 rcftTypeRC862-30-REMOTE(62603), ---对应设备类型0xF48B rcftTypeRCMS2911-480FE(62607), ---对应设备类型0xF48F rcftTypeRCMS2912-480FE-REMOTE(62611), ---对应设备类型0xF493 rcftTypeRCMS2912-240FE-REMOTE(62615), ---对应设备类型0xF497 rcftTypeRCMS2901-480EFE(62616), ---对应设备类型0xF498 rcftTypeRC861-480E(62618), ---对应设备类型0xF49A rcftTypeRCVS1000-501B(206918), ---对应设备类型0x1b06 rcftTypeRCVS1000-502B(206919), ---对应设备类型0x1b07 rcftTypeRCVS1000-504A(206915), ---对应设备类型0x1b03 rcftTypeTS1000-UNCONFIG-PRODUCT(64769), ---对应设备类型0xFD01 rcftTypeRC521-FE-REV-C(64770), ---对应设备类型0xFD02 rcftTypeRC521-FE-REV-D(64771), ---对应设备类型0xFD03 rcftTypeRC952-SE1M-REMOTE(62582), ---对应设备类型0xF476 rcftTypeRC952-CSE1M-REMOTE(62606), ---对应设备类型0xF48E } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备的类型 设备类型号的枚举值21000到22000的属于OAM的设备。 22000字段的为7017设备。 25000到26000的是收发器模式下的约定四设备； 大于26000的是光端机模式下的约定四。 " ::= { rcftRemoteDeviceSysEntry 3 } rcftRemoteDeviceLocalPortType OBJECT-TYPE SYNTAX INTEGER { ethport(1), optical(2), e1port(3), ghdsl(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备所接局端设备的物理端口类型 接口类型（1:电口，2：光口，3：E1口，4:G.口) " ::= { rcftRemoteDeviceSysEntry 4 } rcftRemoteDeviceLocalPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备所接局端设备的物理端口索引，哪一端口被占用相应的位被置1 -------------------------------------------------------------- | Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 |Bit9 | Bit8 | -------------------------------------------------------------- --------------------------------------------------------- | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 | --------------------------------------------------------- " ::= { rcftRemoteDeviceSysEntry 5 } rcftRemoteDeviceVersionInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..100)) MAX-ACCESS read-only STATUS current DESCRIPTION " 远端板卡的版本信息版本信息的格式是：A.x-X.x-Ex-Fx.y 其中：A.x为硬件版本号；X.x为软件版本号；Ex中的x为以太网交换芯片类型； Fx.y中的x为FPGA芯片代号，y为FPGA代码版本号。 " ::= { rcftRemoteDeviceSysEntry 6 } rcftRemoteSysTemperature OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备温度 " ::= { rcftRemoteDeviceSysEntry 7 } rcftRemoteSysVoltageStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), toohigh(2), toolow(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备电压异常 " ::= { rcftRemoteDeviceSysEntry 8 } rcftRemoteDeviceWorkMode OBJECT-TYPE SYNTAX INTEGER { masterCtrl(1), slaveCtrl(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备的工作模式(1:主控，2:从控) " ::= { rcftRemoteDeviceSysEntry 9 } rcftRemoteDeviceFrameLen OBJECT-TYPE SYNTAX INTEGER { framelen1916B(1), framelen1536B(2), framelen9728B(3), framelen1518B(4), framelen9kB(5), framelen2048(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " 本模块以太网帧的最大帧长：（1：1916B，2：1536B）. The max frame length of the ethernet port in the remote module. " ::= { rcftRemoteDeviceSysEntry 10 } rcftRemoteDeviceOrder OBJECT-TYPE SYNTAX INTEGER { reset(1), reqInfoStart(2), reqInfoStop(3), shdslPortReset(4), shdslPortInisdeLoopEnable(5), shdslPortOutsideLoopEnable(6), shdslPortInisdeLoopDisable(7), shdslPortOutsideLoopDisable(8), e1UnUsedAlarmMask(9), e1UnUsedAlarmUnMask(10), pdhPortOutsideLoopEnable(11), ds3E3PortOutsideLoopEnable(12), allLoopDisable(13), errorCodeTestEnable(14), errorCodeTestDisable(15), portOutsideLoopEnable(17), --kuanglili 20090515 modified: named duplicate statisticInfoClear(24), defaultConfigData(25) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备命令字，每个设备都有自己固定的命令字 1:复位 ，2：开始查询信息，3：结束查询信息 ------------------------------------------- | bit31-27 | bit26-22 | bit21-0 | ------------------------------------------- |端口类型 | 端口ID | 命令字 | ------------------------------------------- 约定： 端口类型有5位： 0： 表示设备 1 以太网电口 2 以太网光口 3 G.SHDSL端口 4 E1端口(Sa比特不处理) 5 V35端口 端口ID有5位：0-31表示32个端口 命令字有22位： 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 注意：对于约定四而言，使用rcftRemoteDeviceOrder作为内部变量，按照上面的格式将设备级的命令和 端口级的命令转化为一个字符串、综合处理。因此，这就要求rcftRemoteDeviceOrder的枚举值要和各个 接口级命令的枚举值完全一致。如果某个接口级的命令添加了一个新的枚举值，就要把其他接口 下的命令和rcftRemoteDeviceOrder的枚举值都添加一下。总之，要做到一改全改、始终一致。 " ::= { rcftRemoteDeviceSysEntry 11 } rcftRemoteDeviceConfigFlag OBJECT-TYPE SYNTAX INTEGER { set(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备的配置标志，绑定对象结束的标志 " ::= { rcftRemoteDeviceSysEntry 12 } rcftRemoteSlotAutoCutErrLineEn OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备误码自动切断功能:(1:使能,2:禁止). " ::={ rcftRemoteDeviceSysEntry 13 } rcftRemotePowerSupply OBJECT-TYPE SYNTAX INTEGER { ac220v(1), dc-48v(2), dc24v(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备的供电方式 " ::={ rcftRemoteDeviceSysEntry 14 } rcftRemoteDevicePowerDown OBJECT-TYPE SYNTAX INTEGER { normal(1), powerdown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备掉电状态 " ::={ rcftRemoteDeviceSysEntry 15 } rcftRemoteDeviceClkMode OBJECT-TYPE SYNTAX INTEGER { masterClk(1), e1PortClk(2), gPortClk(3), secondary(4), v35PortClk(5), reserved(100) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备的时钟模式:1：主时钟；2：E1端口时钟；3：G.端口时钟；4:从时钟 100：保留 两个字节表示：高字节表示时钟源的端口类型，低字节表示端口ID 端口类型取值分别表示： 0x00，表示采用内(主)时钟方式 0x01 以太网电口 0x02 以太网光口 0x03 G.SHDSL端口 0x04 E1端口(Sa比特不处理) 0x05 V35端口 " ::={ rcftRemoteDeviceSysEntry 16 } rcftRemoteDeviceE1SubCardType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备上E1子卡类型 数值和设备的对应关系是： 0： RC2002-SUB_1E1 1： RC2002-SUB_2E1 2： RC954－SUB－4E1－BL 3： RC954－SUB－8E1－BL 4： RC2802-SUB-4E1 5： RC832-SUB-8E1 6： RC832-SUB-8E1-BL 7： RC832-SUB-4E1-BL 8： RC954－SUB－8E1 " ::={ rcftRemoteDeviceSysEntry 17 } rcftRemoteDeviceGateway OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " 表示设备的网关 " ::={rcftRemoteDeviceSysEntry 18} rcftRemoteDeviceIP OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " 表示设备的IP地址 " ::={rcftRemoteDeviceSysEntry 19} rcftRemoteDeviceSubnetMask OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " 表示设备的子网掩码 " ::={rcftRemoteDeviceSysEntry 20} rcftRemoteDeviceVLANID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备的VLAN ID " ::={rcftRemoteDeviceSysEntry 21} rcftRemoteDeviceCommunityRW OBJECT-TYPE SYNTAX INTEGER { read(1), readwrite(2), clear(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备的共同体属性 1:只读 2:读写 3:清除共同体属性 " ::={rcftRemoteDeviceSysEntry 22} rcftRemoteDeviceCommunityLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备的共同体名长度 " ::={rcftRemoteDeviceSysEntry 23} rcftRemoteDeviceCommunity OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备的共同体名 " ::={rcftRemoteDeviceSysEntry 24} rcftRemoteDeviceVoltageValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 每八位表示一个电压值, 第一个8位表示3.3V的电压值,第二个8位表示2.5V的电压值, 第三个8位表示1.8V的电压值,第四个高8位表示1.2V的电压值 -------------------------------------------- | 4 | 3 | 2 | 1 | -------------------------------------------- " ::={rcftRemoteDeviceSysEntry 25} rcftRemoteDeviceStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT19 对端设备工作模式 0：有损 1：无损 BIT18 本端设备工作模式 0：有损 1：无损 BIT17 0：单电口，1：多电口 BIT16 双向保护倒换。0：禁止，1：使能 BIT15 返回模式。0：非返回, 1：返回 BIT14 E-6倒换条件启用。0：不启用，1：启用 BIT13 当前的工作通道。0：pri，1：sec BIT11-BIT12 工作通道选择方式。00：自动保护倒换, 01：手动倒换 10：强制倒换, 11：保留 BIT10 工作通道选择。0：pri，1：sec BIT9 故障转移。1：使能，2：禁止 BIT8 屏蔽告警音 1：屏蔽 0：不屏蔽 BIT7 光口的ALS功能 0：不使能 1：使能 BIT6 Power2工作状态 1：工作正常 0：工作异常或未接 BIT5 Power1工作状态 1：工作正常 0：工作异常或未接 BIT4 对端总告警 1：正常 0：告警 BIT3 本地总告警 1：正常 0：告警 BIT2 E1未用支路告警屏蔽状态 1：屏蔽 0：不屏蔽 BIT1-0 光口倒换功能状态 00：自动保护倒换 01：强制选择B 10：强制选择A " ::={rcftRemoteDeviceSysEntry 26} rcftRemoteSubModuleExist OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 每一位表示扩展槽N子卡的在位状态：0：不在位，1：在位 " ::={rcftRemoteDeviceSysEntry 27} rcftRemoteMultiE1LoopOrder OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " 针对四路E1环回的命令节点 每一字节表示一路E1的环回命令 0：本地环回，1：无本地环回：，2：远端环回，3：无远端环回 " ::={rcftRemoteDeviceSysEntry 28} rcftRemoteOrderTimeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块发送命令时所需要赋的时长参数。 1: 测试时长1分钟 2: 测试时长2分钟 3: 测试时长4分钟 4: 测试时长8分钟 5: 测试时长15分钟 6: 测试时长30分钟 7: 测试时长60分钟 18: 测试2帧 19: 测试5帧 20: 测试10帧 21: 测试20帧 22: 测试50帧 23: 测试100帧 " ::= { rcftRemoteDeviceSysEntry 29 } rcftRemoteOrderModeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块发送命令时所需要赋的模式参数。 " ::= { rcftRemoteDeviceSysEntry 30 } rcftRemoteSDRAMBuf OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 设置远端SDRAM大小 之前定义的是 1:小缓存 2:大缓存 以后用以下枚举值： 1：半用 2：全用 3：四分之一占用 4：八分之一占用 " ::= { rcftRemoteDeviceSysEntry 31 } rcftRemoteRLPStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端RLP灯状态 1：RLP灯灭 2：RLP绿闪 3：RLP绿常亮 4：RLP黄闪 5：RLP黄常亮 " ::= { rcftRemoteDeviceSysEntry 32 } rcftRemoteLALStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 0: 灭 1:黄闪亮 2:黄常亮 3:红闪亮 4:红常亮 " ::= { rcftRemoteDeviceSysEntry 33 } rcftRemoteRALStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 0: 灭 1:黄闪亮 2:黄常亮 3:红闪亮 4:红常亮 " ::= { rcftRemoteDeviceSysEntry 34 } rcftRemoteDeviceSwitchStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT0 光口的ALS开关功能 0：禁止 1：使能 " ::={rcftRemoteDeviceSysEntry 35} rcftRemoteDeviceMoudleExist OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT3 第四个扩展子卡的在位 0：不在位 1：在位 BIT2 第三个扩展子卡的在位 0：不在位 1：在位 BIT1 第二个扩展子卡的在位 0：不在位 1：在位 BIT0 第一个扩展子卡的在位 0：不在位 1：在位 " ::={rcftRemoteDeviceSysEntry 36} rcftRemoteCardInformation OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " 订货信息， 对于光端机来说： 例如：RCMS1000-504A-XX 。 其中：XXXX表示4个扩展槽的小模块是否存在及类型。每个X表示一个槽位是否存在小模块： ０：无，Ｄ：有数据，Ａ：有音频，Ｖ：有视频，E：有以太口，1：有非智能 " ::={rcftRemoteDeviceSysEntry 37} rcftRemoteSwitchType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 交换模式： 1：全交换 2：端口隔离 3：VLAN模式 " ::={rcftRemoteDeviceSysEntry 38} rcftRemoteConnectMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 对通模式： 1：不对通； 2：模式1（与RJ017对通）； 3：模式2（与RC7221对通）。 " ::={rcftRemoteDeviceSysEntry 39} rcftRemoteQosEnable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " Qos使能/禁止： 1：使能 2：禁止 " ::={rcftRemoteDeviceSysEntry 40} rcftRemoteBaseCOS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " Base COS，范围0~7。 从以太口进入的带tag数据包如果它的tag中COS值大于等于此值，则此数据包为高优先级， 反之为低优先级。 " ::={rcftRemoteDeviceSysEntry 41} rcftRemoteDSCP OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..65)) MAX-ACCESS read-write STATUS current DESCRIPTION " DSCP映射。（OCTET STRING）。 字节顺序为从右到左，分别表示0~63字节，表示DSCP[0~63]。 每一字节为1表示IP帧头相应的DSCP（TOS）域的数据包为高优先级，为0则为低优先级。 例如：rcftRemoteDSCP 字节60=1、字节50=1，其他bit为0。 表示DSCP域为111100、110010的数据包为高优先级，其他的为低优先级。 " ::={rcftRemoteDeviceSysEntry 42} rcftRemoteQueuesPolicy OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 队列调度策略 1:严格优先 2：加权循环（高：低）10:1； 3：加权循环（高：低）5:1； 4：加权循环（高：低）2:1； " ::={rcftRemoteDeviceSysEntry 43} rcftRemoteMultiE1AlarmRejectOrder OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION " 针对E1告警屏蔽的命令节点 每一字节表示一路E1的告警屏蔽命令 1：屏蔽 2：不屏蔽 该字符串中从左到右分别表示对第1－N路E1的告警屏蔽操作 " ::={rcftRemoteDeviceSysEntry 44} rcftRemoteT1PortPulseWaveForm OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " T1脉冲波形 2：T1传输距离为0~133ft 3：T1传输距离为133~266ft 4：T1传输距离为266~399ft 5：T1传输距离为399~533ft 6：T1传输距离为533~655ft " ::= { rcftRemoteDeviceSysEntry 45 } rcftRemoteT1PortCodeType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " T1的编码类型 1：B8ZS 2：AMI " ::= { rcftRemoteDeviceSysEntry 46 } rcftRemoteDeviceSabitMode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Sabit 的工作模式 bit1-0：Sa4； bit3-2：Sa5； bit5-4：Sa6； bit7-6：Sa7 bit9-8：Sa8 00：字节模式，（00：代表默认的模式，字节模式） 01：HDLC模式 10：禁止 " ::= { rcftRemoteDeviceSysEntry 47 } rcftRemoteDeviceApsWaitToRestore OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " -- 设备保护倒换自恢复时间，设备恢复到主通道的时间,以分钟为单位 -- 缺省值为12，可以设置范围为0－255 " ::= { rcftRemoteDeviceSysEntry 48 } rcftRemoteDeviceCLKChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 从时钟选取的E1编号，范围：1-设备E1端口数 " ::= { rcftRemoteDeviceSysEntry 49 } rcftRemoteDeviceRmcChannelType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 收发器网管通道模式：1：802.3ah，2：rclink， 3：TS1000， 10：远端收发器网管禁止 " ::= { rcftRemoteDeviceSysEntry 50 } rcftRemoteDeviceProductType OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION " 产品型号，ASCII码 " ::={rcftRemoteDeviceSysEntry 51} rcftRemoteDeviceProtocolVer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 协议版本 " ::= {rcftRemoteDeviceSysEntry 52} rcftRemoteDeviceVenderCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " vender code，厂家ID。 在移动标准信息中为1字节。 在TS1000标准信息中为3字节，我公司ID为：0x00-0x0E-0x5E。 " ::= {rcftRemoteDeviceSysEntry 53} rcftRemoteDeviceModelID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Model ID ，表示各厂家私有设备类型。 在TS1000标准信息中为3字节： RC521-FE-C的Model ID为 0x00fc24， RC521-FE-D的Model ID为 0x00fc00。 " ::= {rcftRemoteDeviceSysEntry 54} rcftRemoteE1PortNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 设备的E1 端口数 " ::= {rcftRemoteDeviceSysEntry 55} rcftRemoteDeviceVLANType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 设备的VLAN模式 1：no vlan 2：port vlan 3：tag vlan " ::= {rcftRemoteDeviceSysEntry 56} rcftRemoteDeviceQoSPolicy OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 设备的QoS优先级划分策略： 1：基于端口的 2：基于COS的 " ::= {rcftRemoteDeviceSysEntry 57} rcftRemoteDeviceApsE3SwitchDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 设备保护倒换时，E-3告警切换延时时间，以秒为单位 1～15，默认为5 " ::= { rcftRemoteDeviceSysEntry 58} rcftRemoteDeviceApsE6SwitchDelay OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 设备保护倒换时，E-6告警切换延时时间，以秒为单位 1～255，默认为60 " ::= { rcftRemoteDeviceSysEntry 59} rcftRemoteDeviceVLANTagDirection OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN-TAG方向 1：光口到电口 2：电口到光口 " ::= { rcftRemoteDeviceSysEntry 60} rcftRemoteDeviceVLANTagModule OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN-TAG模式 1：透传 2：单Tag 3：双Tag 4：保留 " ::= { rcftRemoteDeviceSysEntry 61} rcftRemoteDeviceISPTPID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " ISP TPID的值，有效值：1~0xfffe, （显示为16进制） " ::= { rcftRemoteDeviceSysEntry 62} rcftRemoteE1DS1PortType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备E1/T1模式 0：E1, 1：DS1（T1） " ::= { rcftRemoteDeviceSysEntry 63} rcftRemoteDeviceE1FrameChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 成帧的E1支路 0: 均不成帧，1-设备E1数: 成帧的E1支路ID(1 ~设备E1数) " ::= { rcftRemoteDeviceSysEntry 64} rcftRemoteDeviceManageID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 设备管理ID 1~255 " ::= { rcftRemoteDeviceSysEntry 65} rcftRemoteDeviceMibUse OBJECT-TYPE SYNTAX INTEGER { mib002(1), rccomlib(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备支持的mib类型 1:使用002mib 2:使用组件库mib " ::= { rcftRemoteDeviceSysEntry 66} rcftRemoteDeviceConfigFlagTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDeviceConfigFlagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { rcftRemoteDeviceSysObjects 2 } rcftRemoteDeviceConfigFlagEntry OBJECT-TYPE SYNTAX RcftRemoteDeviceConfigFlagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex } ::= { rcftRemoteDeviceConfigFlagTable 1 } RcftRemoteDeviceConfigFlagEntry ::= SEQUENCE { rcftRemoteDeviceConfigFinishFlag INTEGER } rcftRemoteDeviceConfigFinishFlag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 第一层远端设备配置结束标志。新设备中用该标志来表明远端配置当次SNMP操作结束。 具体哪些设备用该标志，将在配置说明文档中详细说明。 " ::={rcftRemoteDeviceConfigFlagEntry 1} ---------------------------------------------------------------------------- ------------------RMOTE DEVICE FE TABLE ---------------------------------------------------------------------------- -- Fe Current table rcftRemoteEthFePortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device Fe Port table. " ::= { rcftRemoteDeviceEthFeObjects 1 } rcftRemoteEthFePortEntry OBJECT-TYPE SYNTAX RcftRemoteEthFePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Fe Port config table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex, rcftRemoteEthFeIndex } ::= { rcftRemoteEthFePortTable 1 } RcftRemoteEthFePortEntry ::= SEQUENCE { rcftRemoteEthFeIndex Integer32, rcftRemoteEthFeLinkStatus INTEGER, rcftRemoteEthFeShutDown INTEGER, rcftRemoteEthFeAutoNegotiation INTEGER, rcftRemoteEthFeSpeed INTEGER, rcftRemoteEthFeDuplex INTEGER, rcftRemoteEthFeFlowControl INTEGER, rcftRemoteEthFeRestrictSpeed INTEGER, rcftRemoteEthFeFaultPass INTEGER, rcftRemoteEthFeDisabledByRemoteTP INTEGER, rcftRemoteEthFeDisabledByFxToFeFP INTEGER, rcftRemoteEthFeTxRestrictSpeed INTEGER, rcftRemoteEthFeTag INTEGER, rcftRemoteEthFePortStatus INTEGER, rcftRemoteEthFeRestrictSpeedStep INTEGER, rcftRemoteEthFeOrderTimeParameter INTEGER, rcftRemoteEthFeOrderModeParameter INTEGER, rcftRemoteEthFeOrder INTEGER, rcftRemoteEthFePortStatusExtend INTEGER, rcftRemoteEthFeStormControl INTEGER, rcftRemoteEthFePVID INTEGER, rcftRemoteEthFeDefaultCOS INTEGER, rcftRemoteEthFeQoSPolicy INTEGER } rcftRemoteEthFeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备以太网电口端口索引 " ::= { rcftRemoteEthFePortEntry 1 } rcftRemoteEthFeLinkStatus OBJECT-TYPE SYNTAX INTEGER { linkup(1), linkdown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备以太网电口的link状态 " ::= { rcftRemoteEthFePortEntry 2 } rcftRemoteEthFeShutDown OBJECT-TYPE SYNTAX INTEGER { open(1), close(2), closebyLocalOtherPortFault(3), closebyOppositeFePortFault(4), closebyLoopBack(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网电口的开关使能 1：电口开；2：电口关； 3：电口因为本地其它口故障关； 4：电口因为对端设备电口故障关 " ::= { rcftRemoteEthFePortEntry 3 } rcftRemoteEthFeAutoNegotiation OBJECT-TYPE SYNTAX INTEGER { auto(1), manul(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备电口速率协商方式（1:自协商,2:手动）. This object indicating the negoation mode of the electronic port in the local module.When the value is 1 the eletronic port is set to auto negotiation,otherwise the eletronic port is set to manual negotiation. " ::= { rcftRemoteEthFePortEntry 4 } rcftRemoteEthFeSpeed OBJECT-TYPE SYNTAX INTEGER { rcft10Mbps(1), rcft100Mbps(2), rcft1000Mbps(3), rcft10Gbps(4), other(16) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备电口的速率. The speed of the electronic port. 1、10Mbps 2、100Mbps 3、1000Mbps 4、10Gbps 5、other " ::= { rcftRemoteEthFePortEntry 5 } rcftRemoteEthFeDuplex OBJECT-TYPE SYNTAX INTEGER { full-duplex(1), half-duplex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备电口双工模式（1:全双工，2:半双工）. The duplex mode of the electronic port. 1:full duplex 2:half duplex " ::= { rcftRemoteEthFePortEntry 6 } rcftRemoteEthFeFlowControl OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网端口流控功能使能(1:使能，2:禁止) " ::= { rcftRemoteEthFePortEntry 7 } rcftRemoteEthFeRestrictSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网端口接收限定速率：(n * value；n = 0,1,2....2^12. value = 32kb/s). " ::= { rcftRemoteEthFePortEntry 8 } rcftRemoteEthFeFaultPass OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网端口故障转移功能(1:使能，2:禁止) " ::= { rcftRemoteEthFePortEntry 9 } rcftRemoteEthFeDisabledByRemoteTP OBJECT-TYPE SYNTAX INTEGER { open(1), close(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备以太网电口关闭的原因是由于对端电口linkdown " ::= { rcftRemoteEthFePortEntry 10 } rcftRemoteEthFeDisabledByFxToFeFP OBJECT-TYPE SYNTAX INTEGER { open(1), close(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备以太网电口关闭的原因是由于光到电故障转移功能使能 " ::= { rcftRemoteEthFePortEntry 11 } rcftRemoteEthFeTxRestrictSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网电口发送限定速率。其最大值视板卡而不同。 " ::= { rcftRemoteEthFePortEntry 12 } rcftRemoteEthFeTag OBJECT-TYPE SYNTAX INTEGER { tag(1), untag(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网电口的标签 " ::= { rcftRemoteEthFePortEntry 13 } rcftRemoteEthFePortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT5 LOC_FP_EN 1：使能本地其它端口故障向电口转移；0：禁止。 BIT4 REM_FP_EN 1：使能远端电口故障向电口转移； 0：禁止。 BIT3-2 MDIX_Valid 00：电口允许自交叉且工作于SW方式； 01：电口允许自交叉且工作于NIC方式； 10：电口禁止自交叉，设置工作于SW方式； 11：电口禁止自交叉。设置工作于NIC方式。 BIT1-0 保留 " ::= { rcftRemoteEthFePortEntry 14 } rcftRemoteEthFeRestrictSpeedStep OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 带宽粒度 0x00：64Kbps； 0x01：32Kbps（无）； 0x02：80Kbps; 0x03：800Kbps; 0x04：8000Kbps; 其余：保留。 " ::= { rcftRemoteEthFePortEntry 15 } rcftRemoteEthFeOrderTimeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块发送命令时所需要赋的时长参数。 1: 测试时长1分钟 2: 测试时长2分钟 3: 测试时长4分钟 4: 测试时长8分钟 5: 测试时长15分钟 6: 测试时长30分钟 7: 测试时长60分钟 18: 测试2帧 19: 测试5帧 20: 测试10帧 21: 测试20帧 22: 测试50帧 23: 测试100帧 " ::= { rcftRemoteEthFePortEntry 16 } rcftRemoteEthFeOrderModeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块发送命令时所需要赋的模式参数。 " ::= { rcftRemoteEthFePortEntry 17 } rcftRemoteEthFeOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 注意：rcftRemoteE1Order的枚举值要和rcftRemoteDeviceOrder始终保持完全一致。 " ::= { rcftRemoteEthFePortEntry 18 } rcftRemoteEthFePortStatusExtend OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 由于501b/502b/504a视频光端机以太口信息没有遵循002标准子块，因此在这里单独 定义一个节点表示视频光端机以太口信息 bit15-8: 视频光端机以太口的位置信息 bit15-12：盘 （0代表基盘。002目前只有基盘，固定bit7-4为全0） bit11-8： 槽 （1~15:扩展槽） BIT4 link 1：linkup 0：linkdown BIT3 开关 1：打开 0：关闭 BIT2 自适应 1：使能 0：禁止 BIT1 双工 1：全双工， 0：半双工 BIT0 速率， 1：100M， 0：10M " ::={rcftRemoteEthFePortEntry 19} rcftRemoteEthFeStormControl OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 广播风暴抑制。 1：使能，2：禁止。 " ::={rcftRemoteEthFePortEntry 20} rcftRemoteEthFePVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " PVID。范围：1~4094 " ::={rcftRemoteEthFePortEntry 21} rcftRemoteEthFeDefaultCOS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 默认COS值。范围：0~7 " ::={rcftRemoteEthFePortEntry 22} rcftRemoteEthFeQoSPolicy OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " QoS优先级划分策略。 Bit2：DSCP使能。1：使能，0：禁止 Bit1：COS使能。1：使能，0：禁止 Bit0：端口优先级。1：高优先级，0：低优先级。 " ::={rcftRemoteEthFePortEntry 23} -- -------------------------------------------------------------------------- -- ----------------REMOTE DEVICE FX TABLE -- -------------------------------------------------------------------------- rcftRemoteEthFxPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFxPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device FX Port table. " ::= { rcftRemoteDeviceEthFxObjects 1 } rcftRemoteEthFxPortEntry OBJECT-TYPE SYNTAX RcftRemoteEthFxPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Fx Port config table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex, rcftRemoteEthFxIndex } ::= { rcftRemoteEthFxPortTable 1 } RcftRemoteEthFxPortEntry ::= SEQUENCE { rcftRemoteEthFxIndex Integer32, rcftRemoteEthFxFlowControl INTEGER, rcftRemoteEthFxPortRLK INTEGER, rcftRemoteEthFxPortTLK INTEGER, rcftRemoteEthFxPortSD INTEGER, rcftRemoteEthFxPortTxPowerAbnormal INTEGER, rcftRemoteEthFxPortRxSensitiveAbnormal INTEGER, rcftRemoteEthFxPortLaserAbnormal INTEGER, rcftRemoteEthFxShutDown INTEGER, rcftRemoteEthFxModuleType INTEGER, rcftRemoteEthFxFaultPass INTEGER, rcftRemoteEthFxPortLink INTEGER, rcftRemoteEthFxRxToTxFaultPass INTEGER, rcftRemoteEthFxTxDisabledByFR INTEGER, rcftRemoteEthFxOrderTimeParameter INTEGER, rcftRemoteEthFxOrderModeParameter INTEGER, rcftRemoteEthFxOrder INTEGER, rcftRemoteEthFxPortExist INTEGER, rcftRemoteEthFxPortAuto INTEGER, rcftRemoteEthFxModuleMaxSpeed INTEGER, rcftRemoteEthFxTranDistance INTEGER, rcftRemoteEthFxModuleWaveLen INTEGER, rcftRemoteEthFxPortConnectorType INTEGER, rcftRemoteEthFxPortTransmitMedia INTEGER, rcftRemoteEthFxModuleManufacturer OCTET STRING, rcftRemoteEthFxModuleDescr OCTET STRING, rcftRemoteEthFxPortModuleVersion OCTET STRING, rcftRemoteEthFxModuleSerialNumber OCTET STRING, rcftRemoteEthFxPortSFPDiagnoInfo INTEGER, rcftRemoteEthFxSFPDiagnoAlarmStatus INTEGER, rcftRemoteEthFxPortStatus INTEGER, rcftRemoteEthFxUntag INTEGER, rcftRemoteEthFxPVID INTEGER, rcftRemoteEthFxPortSFPType INTEGER, rcftRemoteEthFxPortSFPInfo INTEGER, rcftRemoteEthFxPortLoopStatus INTEGER, rcftRemoteEthFxPortRxRestrictSpeed INTEGER, rcftRemoteEthFxPortTxRestrictSpeed INTEGER, rcftRemoteEthFxSFPDiagnoWarningStatus INTEGER, rcftRemoteEthFxPortLineOrClient INTEGER, rcftRemoteEthFxCOS INTEGER } rcftRemoteEthFxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备光口的索引 " ::= { rcftRemoteEthFxPortEntry 1 } rcftRemoteEthFxFlowControl OBJECT-TYPE SYNTAX INTEGER{ enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网端口流控功能使能(1:使能，2:禁止) " ::= { rcftRemoteEthFxPortEntry 2 } rcftRemoteEthFxPortRLK OBJECT-TYPE SYNTAX INTEGER { link(1), unlink(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备光口RLK " ::= { rcftRemoteEthFxPortEntry 3 } rcftRemoteEthFxPortTLK OBJECT-TYPE SYNTAX INTEGER { link(1), unlink(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备光口TLK " ::= { rcftRemoteEthFxPortEntry 4 } rcftRemoteEthFxPortSD OBJECT-TYPE SYNTAX INTEGER { normal (1), sd (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备光口SD异常 " ::= { rcftRemoteEthFxPortEntry 5 } rcftRemoteEthFxPortTxPowerAbnormal OBJECT-TYPE SYNTAX INTEGER { normal (1), abnormal (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备发送功率异常 " ::= { rcftRemoteEthFxPortEntry 6 } rcftRemoteEthFxPortRxSensitiveAbnormal OBJECT-TYPE SYNTAX INTEGER { normal (1), abnormal (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备接收灵敏度异常 " ::= { rcftRemoteEthFxPortEntry 7 } rcftRemoteEthFxPortLaserAbnormal OBJECT-TYPE SYNTAX INTEGER { normal (1), abnormal (2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备光激光管工作异常 " ::= { rcftRemoteEthFxPortEntry 8 } rcftRemoteEthFxShutDown OBJECT-TYPE SYNTAX INTEGER { open(1), close(2), closeByFP(3), closeByALS(4), closeByLP(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网光口的开关使能 " ::= { rcftRemoteEthFxPortEntry 9 } rcftRemoteEthFxModuleType OBJECT-TYPE SYNTAX INTEGER { optical-M(1), optical-S1(2), optical-S2(3), optical-S3(4), optical-SS13(5), optical-SS15(6), optical-SS23(7), optical-SS25(8), --optical-SS3(9), kuanglili 20090519 根据公司规范取消ss3光头类型 optical-SS34(9), optical-SS35(10), optical-S15(12), --kuanglili 20090909 S15光模块的枚举为12 optical-SFP(15), unknown-type(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备以太网光口的光模块类型 " ::= { rcftRemoteEthFxPortEntry 10 } rcftRemoteEthFxFaultPass OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网光口故障转移功能(1:使能,2:禁止) " ::= { rcftRemoteEthFxPortEntry 11 } rcftRemoteEthFxPortLink OBJECT-TYPE SYNTAX INTEGER { link(1), unlink(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备光口LINK " ::= { rcftRemoteEthFxPortEntry 12 } rcftRemoteEthFxRxToTxFaultPass OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备以太网光口故障返回功能(1:使能,2:禁止) " ::= { rcftRemoteEthFxPortEntry 13 } rcftRemoteEthFxTxDisabledByFR OBJECT-TYPE SYNTAX INTEGER { open(1), close(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备以太网光口发送关闭的原因是由于光口接收故障向发送方向转移功能使能造成的。 " ::= { rcftRemoteEthFxPortEntry 14 } rcftRemoteEthFxOrderTimeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块以太网光口发送命令时所需要赋的时长参数。 1: 测试时长1分钟 2: 测试时长2分钟 3: 测试时长4分钟 4: 测试时长8分钟 5: 测试时长15分钟 6: 测试时长30分钟 7: 测试时长60分钟 18: 测试2帧 19: 测试5帧 20: 测试10帧 21: 测试20帧 22: 测试50帧 23: 测试100帧 " ::= { rcftRemoteEthFxPortEntry 15 } rcftRemoteEthFxOrderModeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块以太网光口发送命令时所需要赋的模式参数。 " ::= { rcftRemoteEthFxPortEntry 16 } rcftRemoteEthFxOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 24: 环回测试（一次完成自动停止） " ::= { rcftRemoteEthFxPortEntry 17 } rcftRemoteEthFxPortExist OBJECT-TYPE SYNTAX INTEGER { exist(1), no-exist(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 光模块是否在位：1：在位，2：不在位 " ::= { rcftRemoteEthFxPortEntry 18 } rcftRemoteEthFxPortAuto OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 光口自协商：1：使能，2：禁止 " ::= { rcftRemoteEthFxPortEntry 19 } rcftRemoteEthFxModuleMaxSpeed OBJECT-TYPE SYNTAX INTEGER { stm16(1), stm8(2), stm4(3), stm1(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " 光口最大速率 1 : 2.5Gbit/s; 2 : 1.25Gbit/s; 3 : 622Mbit/s; 4 : 155Mbit/s; 5 : 125Mbit/s " ::= { rcftRemoteEthFxPortEntry 20 } rcftRemoteEthFxTranDistance OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 传输距离，单位km。 " ::= { rcftRemoteEthFxPortEntry 21 } rcftRemoteEthFxModuleWaveLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块工作波长(单位为nm) " ::= { rcftRemoteEthFxPortEntry 22 } rcftRemoteEthFxPortConnectorType OBJECT-TYPE SYNTAX INTEGER { unkkown(1), rj45(2), sc(3), style1(4), style2(5), bnctnc(6), coaheader(7), jack(8), lc(9), mtrj(10), mu(11), sg(12), opticalpigtail(13), hssdc2(14), copperpigtail(15) } MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块连接头类型:(1 : 未知类型; 2 : rj45; 3 : sc; 4 : style1; 5 : style2; 6 : bnctnc; 7 : coaheader; 8 : jack; 9 : lc; 10 : mtrj; 11 : mu; 12 : sg; 13 : opticalpigtail; 14 : hssdc2; 15 : copperpigtail) " ::={rcftRemoteEthFxPortEntry 23} rcftRemoteEthFxPortTransmitMedia OBJECT-TYPE SYNTAX INTEGER { unkkown(1), singleMode9um(2), multiMode50um(3), multiMode62point5um(4), copperline(15) } MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块传输介质:(1 : 未知类型; 2 : 单模9um; 3 : 多模50um; 4 : 多模62.5um 15:铜线) " ::={rcftRemoteEthFxPortEntry 24} rcftRemoteEthFxModuleManufacturer OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块的模块制造厂商 " ::= { rcftRemoteEthFxPortEntry 25 } rcftRemoteEthFxModuleDescr OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块的产品型号 " ::= { rcftRemoteEthFxPortEntry 26 } rcftRemoteEthFxPortModuleVersion OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..10)) MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块的版本号 " ::= { rcftRemoteEthFxPortEntry 27 } rcftRemoteEthFxModuleSerialNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " SFP模块的序列号 " ::={rcftRemoteEthFxPortEntry 28} rcftRemoteEthFxPortSFPDiagnoInfo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 光模块数字诊断的相关信息 bit3: 监测到sfp模块 1：有告警 0：无 bit2: 采用内部校准： 1：有效， 0：无效 bit1: 采用外部校准： 1：有效， 0：无效 bit0: 是否具有数字诊断功能：1：有 0：无 " ::={rcftRemoteEthFxPortEntry 29} rcftRemoteEthFxSFPDiagnoAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 光模块数字诊断的相关告警 bit9: 收光功率下限告警： 1：有告警，0：没有告警 bit8: 收光功率上限告警： 1：有告警，0：没有告警 bit7: 发光功率下限告警： 1：有告警，0：没有告警 bit6: 发光功率上限告警： 1：有告警，0：没有告警 bit5: 电流下限告警： 1：有告警，0：没有告警 bit4: 电流上限告警： 1：有告警，0：没有告警 bit3: 电压下限告警： 1：有告警，0：没有告警 bit2: 电压上限告警： 1：有告警，0：没有告警 bit1: 温度下限告警： 1：有告警，0：没有告警 bit0: 温度上限告警： 1：有告警，0：没有告警 " ::={rcftRemoteEthFxPortEntry 30} rcftRemoteEthFxPortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " bit1-0：速率。 00：10M，01：100M。 bit2：双工。 1：全双工。0：半双工 bit3：发送使能/禁止。 1：使能，0：禁止。 bit4：远端掉电。 1：正常，0：掉电。 bit5: ALS 1：使能，0：禁止 bit6：LBK-Test_Valid。1：环回测试过， 0：没有进行过环回测试 bit7：LBK-Test-OK（Bit6为1时有效）。1：测试成功，0：测试失败 bit8：以太网光口OAM网管。 1：使能； 0：禁止。 " ::={rcftRemoteEthFxPortEntry 31} rcftRemoteEthFxUntag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 光口的tag 1：不带tag， 2：带tag " ::={rcftRemoteEthFxPortEntry 32} rcftRemoteEthFxPVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 光口的PVID " ::={rcftRemoteEthFxPortEntry 33} rcftRemoteEthFxPortSFPType OBJECT-TYPE SYNTAX INTEGER { utp(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " SFP接口类型，1：eth电口，2：eth光口。 " ::={rcftRemoteEthFxPortEntry 34} rcftRemoteEthFxPortSFPInfo OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Bit2：远端SFP模块光口打开使能： 1：打开，0：关闭 Bit1：远端SFP模块激光器发送失效： 1：正常，0：失效 Bit0：远端SFP模块输入信号丢失： 1：正常，0：丢失 " ::={rcftRemoteEthFxPortEntry 35} rcftRemoteEthFxPortLoopStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 光口环回: 1: 光口本地外环 2：光口远端外环 3：光口本地内环 4：OAM环 100:正常 " ::={rcftRemoteEthFxPortEntry 36} rcftRemoteEthFxPortRxRestrictSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " ethfx 光口 接收带宽限制 " ::={rcftRemoteEthFxPortEntry 37} rcftRemoteEthFxPortTxRestrictSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " ethfx 光口 发送带宽限制 " ::={rcftRemoteEthFxPortEntry 38} rcftRemoteEthFxSFPDiagnoWarningStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 光模块数字诊断的相关预警 bit9: 收光功率下限预警： 1：有预警，0：没有预警 bit8: 收光功率上限预警： 1：有预警，0：没有预警 bit7: 发光功率下限预警： 1：有预警，0：没有预警 bit6: 发光功率上限预警： 1：有预警，0：没有预警 bit5: 电流下限预警： 1：有预警，0：没有预警 bit4: 电流上限预警： 1：有预警，0：没有预警 bit3: 电压下限预警： 1：有预警，0：没有预警 bit2: 电压上限预警： 1：有预警，0：没有预警 bit1: 温度下限预警： 1：有预警，0：没有预警 bit0: 温度上限预警： 1：有预警，0：没有预警 " ::={rcftRemoteEthFxPortEntry 39} rcftRemoteEthFxPortLineOrClient OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端光口(sfp)属性: 1: 线路侧；2：客户测； " ::={rcftRemoteEthFxPortEntry 40} rcftRemoteEthFxCOS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 0~7 " ::={rcftRemoteEthFxPortEntry 41} rcftRemoteEthFxStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFxStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 远端设备Eth端口的统计表. " ::= {rcftRemoteDeviceEthFxObjects 2} rcftRemoteEthFxStatisticEntry OBJECT-TYPE SYNTAX RcftRemoteEthFxStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteEthFxIndex为索引 " AUGMENTS { rcftRemoteEthFxPortEntry } ::= {rcftRemoteEthFxStatisticTable 1} RcftRemoteEthFxStatisticEntry ::= SEQUENCE { rcftRemoteEthFxTxPackets Counter32, rcftRemoteEthFxTxBytes Counter32, rcftRemoteEthFxRxPackets Counter32, rcftRemoteEthFxRxBytes Counter32, rcftRemoteEthFxRxLostPackets Counter32, rcftRemoteEthFxFluxTimer Counter32, rcftRemoteEthFxTxLostPackets Counter32, rcftRemoteEthFx64TxBytes Counter64, rcftRemoteEthFx64RxBytes Counter64 } rcftRemoteEthFxTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网包数 " ::= { rcftRemoteEthFxStatisticEntry 1 } rcftRemoteEthFxTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网字节数 " ::= { rcftRemoteEthFxStatisticEntry 2 } rcftRemoteEthFxRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网包数 " ::= { rcftRemoteEthFxStatisticEntry 3 } rcftRemoteEthFxRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网字节数 " ::= { rcftRemoteEthFxStatisticEntry 4 } rcftRemoteEthFxRxLostPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网电口接收以太网丢包数 " ::= { rcftRemoteEthFxStatisticEntry 5 } rcftRemoteEthFxFluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计的时间 " ::= { rcftRemoteEthFxStatisticEntry 6 } rcftRemoteEthFxTxLostPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网电口发送以太网丢包数 " ::= { rcftRemoteEthFxStatisticEntry 7 } rcftRemoteEthFx64TxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网字节数, 范围 0 至 2 的64次方-1 " ::= { rcftRemoteEthFxStatisticEntry 8 } rcftRemoteEthFx64RxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网字节数, 范围 0 至 2 的64次方-1 " ::= { rcftRemoteEthFxStatisticEntry 9 } rcftRemoteEthFxPortCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFxPortCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device FX Port table. " ::= { rcftRemoteDeviceEthFxPerformance 1 } rcftRemoteEthFxPortCurrentEntry OBJECT-TYPE SYNTAX RcftRemoteEthFxPortCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Fx Port config table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex, rcftRemoteEthFxIndex } ::= { rcftRemoteEthFxPortCurrentTable 1 } RcftRemoteEthFxPortCurrentEntry ::= SEQUENCE { rcftRemoteEthFxCurrentTemperature OCTET STRING, rcftRemoteEthFxCurrentVoltage OCTET STRING, rcftRemoteEthFxCurrentOffsetCurr OCTET STRING, rcftRemoteEthFxCurrentRecvPower OCTET STRING, rcftRemoteEthFxCurrentSendPower OCTET STRING } rcftRemoteEthFxCurrentTemperature OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "this OBJECT indicates the average temperature in the current 15 minute interval." ::= { rcftRemoteEthFxPortCurrentEntry 1 } rcftRemoteEthFxCurrentVoltage OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OBJECT indicates the averaget voltage in the current 15 minute interval." ::= { rcftRemoteEthFxPortCurrentEntry 2 } rcftRemoteEthFxCurrentOffsetCurr OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the average offset current in the current 15 minute interval." ::= { rcftRemoteEthFxPortCurrentEntry 3 } rcftRemoteEthFxCurrentRecvPower OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average receive power in the current 15 minute interval." ::= { rcftRemoteEthFxPortCurrentEntry 4 } rcftRemoteEthFxCurrentSendPower OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average send power in the current 15 minute interval." ::= { rcftRemoteEthFxPortCurrentEntry 5 } rcftRemoteEthFxPortIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFxPortIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device FX Port table. " ::= { rcftRemoteDeviceEthFxPerformance 2 } rcftRemoteEthFxPortIntervalEntry OBJECT-TYPE SYNTAX RcftRemoteEthFxPortIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Fx Port config table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex , rcftRemoteEthFxIndex, rcftRemoteEthFxIntervalNumber } ::= { rcftRemoteEthFxPortIntervalTable 1 } RcftRemoteEthFxPortIntervalEntry ::= SEQUENCE { rcftRemoteEthFxIntervalNumber INTEGER, rcftRemoteEthFxIntervalTemperature OCTET STRING, rcftRemoteEthFxIntervalVoltage OCTET STRING, rcftRemoteEthFxIntervalOffsetCurr OCTET STRING, rcftRemoteEthFxIntervalRecvPower OCTET STRING, rcftRemoteEthFxIntervalSendPower OCTET STRING } rcftRemoteEthFxIntervalNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " WAN FX PORT 第几个十五分钟 " ::= { rcftRemoteEthFxPortIntervalEntry 1 } rcftRemoteEthFxIntervalTemperature OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "this OBJECT indicates the average temperature in the interval 15 minute interval." ::= { rcftRemoteEthFxPortIntervalEntry 2 } rcftRemoteEthFxIntervalVoltage OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OBJECT indicates the averaget voltage in the interval 15 minute interval." ::= { rcftRemoteEthFxPortIntervalEntry 3 } rcftRemoteEthFxIntervalOffsetCurr OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the average offset interval in the interval 15 minute interval." ::= { rcftRemoteEthFxPortIntervalEntry 4 } rcftRemoteEthFxIntervalRecvPower OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average receive power in the current 15 minute interval." ::= { rcftRemoteEthFxPortIntervalEntry 5 } rcftRemoteEthFxIntervalSendPower OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average send power in the current 15 minute interval." ::= { rcftRemoteEthFxPortIntervalEntry 6 } rcftRemoteEthFxPortPerTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFxPortPerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device FX Port table. " ::= { rcftRemoteDeviceEthFxPerformance 3 } rcftRemoteEthFxPortPerEntry OBJECT-TYPE SYNTAX RcftRemoteEthFxPortPerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Fx Port config table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex, rcftRemoteEthFxIndex } ::= { rcftRemoteEthFxPortPerTable 1 } RcftRemoteEthFxPortPerEntry ::= SEQUENCE { rcftRemoteEthFxPortPerTemperature OCTET STRING, rcftRemoteEthFxPortPerVoltage OCTET STRING, rcftRemoteEthFxPortPerOffsetCurr OCTET STRING, rcftRemoteEthFxPortPerRecvPower OCTET STRING, rcftRemoteEthFxPortPerSendPower OCTET STRING } rcftRemoteEthFxPortPerTemperature OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "this OBJECT indicates the average temperature at present." ::= { rcftRemoteEthFxPortPerEntry 1 } rcftRemoteEthFxPortPerVoltage OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This OBJECT indicates the averaget voltage at present." ::= { rcftRemoteEthFxPortPerEntry 2 } rcftRemoteEthFxPortPerOffsetCurr OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the average offset current at present." ::= { rcftRemoteEthFxPortPerEntry 3 } rcftRemoteEthFxPortPerRecvPower OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average receive power at present." ::= { rcftRemoteEthFxPortPerEntry 4 } rcftRemoteEthFxPortPerSendPower OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average send power at present." ::= { rcftRemoteEthFxPortPerEntry 5 } rcftRemoteEthFeStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFeStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 远端设备Eth端口的统计表. " ::= {rcftRemoteDeviceEthFeObjects 2} rcftRemoteEthFeStatisticEntry OBJECT-TYPE SYNTAX RcftRemoteEthFeStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteEthFeIndex为索引 " AUGMENTS { rcftRemoteEthFePortEntry } ::= {rcftRemoteEthFeStatisticTable 1} RcftRemoteEthFeStatisticEntry ::= SEQUENCE { rcftRemoteEthFeTxPackets Counter32, rcftRemoteEthFeTxBytes Counter32, rcftRemoteEthFeRxPackets Counter32, rcftRemoteEthFeRxBytes Counter32, rcftRemoteEthFeRxLostPackets Counter32, rcftRemoteEthFeFluxTimer Counter32, rcftRemoteEthFeTxLostPackets Counter32 } rcftRemoteEthFeTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网包数 " ::= { rcftRemoteEthFeStatisticEntry 1 } rcftRemoteEthFeTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网字节数 " ::= { rcftRemoteEthFeStatisticEntry 2 } rcftRemoteEthFeRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网包数 " ::= { rcftRemoteEthFeStatisticEntry 3 } rcftRemoteEthFeRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网字节数 " ::= { rcftRemoteEthFeStatisticEntry 4 } rcftRemoteEthFeRxLostPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网电口接收以太网丢包数 " ::= { rcftRemoteEthFeStatisticEntry 5 } rcftRemoteEthFeFluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计的时间 " ::= { rcftRemoteEthFeStatisticEntry 6 } rcftRemoteEthFeTxLostPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网电口发送以太网丢包数 " ::= { rcftRemoteEthFeStatisticEntry 7 } rcftRemoteEthFePortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteEthFePortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device Fe Port config table. " ::= { rcftRemoteDeviceEthFeObjects 3 } rcftRemoteEthFePortConfEntry OBJECT-TYPE SYNTAX RcftRemoteEthFePortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Fe Port config table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex, rcftRemoteEthFeIndex } ::= { rcftRemoteEthFePortConfTable 1 } RcftRemoteEthFePortConfEntry ::= SEQUENCE { rcftRemoteEthFeConfSpeed INTEGER, rcftRemoteEthFeConfDuplex INTEGER } rcftRemoteEthFeConfSpeed OBJECT-TYPE SYNTAX INTEGER { rcft10Mbps(1), rcft100Mbps(2), rcft1000Mbps(3), rcft10Gbps(4), other(16) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备电口的速率配置信息. The speed of the electronic port. 1、10Mbps 2、100Mbps 3、1000Mbps 4、10Gbps 5、other " ::= { rcftRemoteEthFePortConfEntry 1 } rcftRemoteEthFeConfDuplex OBJECT-TYPE SYNTAX INTEGER { full-duplex(1), half-duplex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备电口双工模式配置信息（1:全双工，2:半双工）. The duplex mode of the electronic port. 1:full duplex 2:half duplex " ::= { rcftRemoteEthFePortConfEntry 2 } ---------------------------------------------------------------------------- ------------------Remote Device E1 table ---------------------------------------------------------------------------- rcftRemoteDeviceE1Table OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDeviceE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote Device System table. " ::= { rcftRemoteDeviceE1Objects 1 } rcftRemoteDeviceE1Entry OBJECT-TYPE SYNTAX RcftRemoteDeviceE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the E1 config table. 索引使用对应的VC12的ifIndex " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex,rcftRemoteE1Index } ::= { rcftRemoteDeviceE1Table 1 } RcftRemoteDeviceE1Entry ::= SEQUENCE { rcftRemoteE1Index Integer32, rcftRemoteE1BertEnable INTEGER, rcftRemoteE1ClockMode INTEGER, rcftRemoteE1FrameEnable INTEGER, rcftRemoteE1AlarmStatus INTEGER, rcftRemoteE1SubSpeed Unsigned32, rcftRemoteE1CRCDetectEnable INTEGER, rcftRemoteE1ErrCodeSecCnt Counter32, rcftRemoteE1SErrCodeSecCnt Counter32, rcftRemoteE1TransErrorCode INTEGER, rcftRemoteE1CRCStatus INTEGER, rcftRemoteE1FaultPass INTEGER, rcftRemoteE1LocalLoopEn INTEGER, rcftRemoteE1Location INTEGER, rcftRemoteE1FoundLink INTEGER, rcftRemoteE1UnUsed INTEGER, rcftRemoteToLocalE1AlarmStatus INTEGER, rcftRemoteE1Balance INTEGER, rcftRemoteE1PortStatus INTEGER, rcftRemoteE1PortTS0Mode INTEGER, rcftRemoteE1PortIdleCode INTEGER, rcftRemoteE1LoopStatus INTEGER, rcftRemoteE1OrderTimeParameter INTEGER, rcftRemoteE1OrderModeParameter INTEGER, rcftRemoteE1Order INTEGER, rcftRemoteE1PortType INTEGER, rcftRemoteE1BertStatus INTEGER, rcftRemoteE1BertTime Unsigned32, rcftRemoteE1BertErrCode Unsigned32, rcftRemoteE1BertUnusedTime Unsigned32, rcftRemoteE1BertPortSpeed Unsigned32, rcftRemoteE1BertCodeType INTEGER, rcftRemoteE1BertCodeNum INTEGER, rcftRemoteE1LoopSwitchStatus INTEGER, rcftRemoteE1AlarmRejest INTEGER, rcftRemoteT1AlarmStatus INTEGER, rcftRemoteE1PortVCGNumber INTEGER, rcftRemoteE1ToLNumber INTEGER, rcftRemoteE1CVCnt INTEGER } rcftRemoteE1Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备索引 " ::= { rcftRemoteDeviceE1Entry 1 } rcftRemoteE1BertEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备E1误码仪功能 " ::= { rcftRemoteDeviceE1Entry 2} rcftRemoteE1ClockMode OBJECT-TYPE SYNTAX INTEGER{ master(1), secondary(2), transparent(3), e1received(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备E1的时钟模式 1:主 2：从 3：透传 4：E1接收 " ::= { rcftRemoteDeviceE1Entry 3} rcftRemoteE1FrameEnable OBJECT-TYPE SYNTAX INTEGER { transparent(1), pcm(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备E1口工作模式：（1：透明方式，2：成帧方式）. " ::= { rcftRemoteDeviceE1Entry 4} rcftRemoteE1AlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口的告警信息 -------------------------------------------------------------- | Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 |Bit9 | Bit8 | -------------------------------------------------------------- --------------------------------------------------------- | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 | --------------------------------------------------------- bit0:receive signal LOS bit1:receive signal AIS bit2:receive signal LOF bit3:receive signal CRC bit4:receive signal LOMF bit5:receive signal CV bit6: TSD bit16:receive signal RLOS bit17:receive signal RAIS bit19:receive signal RLOF bit21:receive signal RCRC 每一位：0：告警，1：正常 " ::= { rcftRemoteDeviceE1Entry 5} rcftRemoteE1SubSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " 设置成帧E1的子速率 每一比特代表相应的时隙 " ::= { rcftRemoteDeviceE1Entry 6} rcftRemoteE1CRCDetectEnable OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备E1端口CRC自适应(1:使能，2:禁止) " ::= { rcftRemoteDeviceE1Entry 7 } rcftRemoteE1ErrCodeSecCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口的误码秒计数 " ::= { rcftRemoteDeviceE1Entry 8 } rcftRemoteE1SErrCodeSecCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口的严重误码秒计数 " ::= { rcftRemoteDeviceE1Entry 9 } rcftRemoteE1TransErrorCode OBJECT-TYPE SYNTAX INTEGER { less10E-6(1), more10E-6(2), more10E-3(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1传输误码率(1:小于10E-6,2:大于10E-6,小于10E-3,3:大于10E-3). " ::= { rcftRemoteDeviceE1Entry 10 } rcftRemoteE1CRCStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口CRC状态 " ::= { rcftRemoteDeviceE1Entry 11 } rcftRemoteE1FaultPass OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端设备E1端口故障转移功能(1:使能,2:禁止) " ::= { rcftRemoteDeviceE1Entry 12 } rcftRemoteE1LocalLoopEn OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端E1口工作在外环:(1:使能,2:不使能) " ::= { rcftRemoteDeviceE1Entry 13 } rcftRemoteE1Location OBJECT-TYPE SYNTAX INTEGER { e1-1(1), e1-2(2), e1-3(3), e1-4(4), e1-5(5), e1-6(6), e1-7(7), e1-8(8), unknown(100) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端对应的远端是第几路E1口(1:E1-1,2:E1-2,3:E1-3,4:E1-4). " ::= { rcftRemoteDeviceE1Entry 14 } rcftRemoteE1FoundLink OBJECT-TYPE SYNTAX INTEGER { success(1), failForDelay(2), failForOtherReason(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端接口是否建链成功:(1:成功,2:失败) " ::= { rcftRemoteDeviceE1Entry 15 } rcftRemoteE1UnUsed OBJECT-TYPE SYNTAX INTEGER { unused(1), used(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 远端接口是否被使用:(1:没有,2:有) " ::= { rcftRemoteDeviceE1Entry 16 } rcftRemoteToLocalE1AlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口所接对端E1端口的告警信息 -------------------------------------------------------------- | Bit15 | Bit14 | Bit13 | Bit12 | Bit11 | Bit10 |Bit9 | Bit8 | -------------------------------------------------------------- --------------------------------------------------------- | Bit7 | Bit6 | Bit5 | Bit4 | Bit3 | Bit2 | Bit1 | Bit0 | --------------------------------------------------------- bit0:receive signal LOS bit1:receive signal AIS bit2:receive signal LOF bit3:receive signal CRC bit4:receive signal LOMF bit5:receive signal CV bit6: TSD, 信号恶化告警 bit7：RDI，对端缺陷告警。 bit16：对端LOS bit17：对端AIS bit19：对端LOF bit20：对端LOMF bit21：对端CRC bit22：对端TSD 每一位：0:告警，1：正常 " ::= { rcftRemoteDeviceE1Entry 17 } rcftRemoteE1Balance OBJECT-TYPE SYNTAX INTEGER { balance(1), imbalance(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备某一路E1的平衡标识 " ::= { rcftRemoteDeviceE1Entry 18 } rcftRemoteE1PortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT22 网管通道模式（可与BIT19组合） 1：启用独立时隙；0：未启用独立时隙 BIT21 E1环回检测结果 0：无环 1：有环 BIT20 E1环回检测 0: 禁止 1：使能 BIT19 SABIT 0：本地E1 未使用SA BIT； 1：本地E1 使用SA BIT； BIT18 E1协议版本 0：V2 1：V3 （网管不显示） BIT17 响应对端跟随 0：禁止 1：使能 BIT16 对端跟随 0：无请求， 1：请求 ，对端有请求后，E1时隙网管不可配 BIT14 E1used: 1：E1口被使用； 0：E1口未被使用。 BIT13 CRC_EN: 1：CRC使能； 0：CRC禁止。 BIT12-11 IN_LBK-Test 00：没有进行过内环测试； 01：保留；10：内环测试成功；11：内环测试失败。 BIT10-9 EX_LBK-Test 00：没有进行过环回测试； 01：保留；10：外环测试成功；11：外环测试失败。 BIT8 IDLE_MODE 0：固定使用IDLE_CODE； 1：返回。 BIT7-6 Port_En 00：端口开；01：端口关；1x：保留。 BIT5-4 阻抗 00：75欧姆非平衡；01：120欧姆平衡；其它：保留。 BIT3-2 保留 固定00'b。 BIT1-0 接口方式00：BNC； 01：RJ45插座；其它：保留。 " ::= { rcftRemoteDeviceE1Entry 19 } rcftRemoteE1PortTS0Mode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 工作模式（TS0）： 8：工作于透明模式，透传TS0-32，TS0=1； 1：成帧模式0，发送端不发送TS0、接收端重新计算整个TS0； 9：成帧模式1，发送端透传TS0、接收端也使用透传来的TS0（IDLE CODE一致时才可以使用此模式）； 2：成帧模式2，发送端不发送TS0、接收端返回TS0（CRC除外，重新计算）； 10：成帧模式3，发送端透传TS0、但接收端丢弃CRC使用重新计算的CRC；其它：保留。 " ::= { rcftRemoteDeviceE1Entry 20 } rcftRemoteE1PortIdleCode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 未用时隙的码字 " ::= { rcftRemoteDeviceE1Entry 21 } rcftRemoteE1LoopStatus OBJECT-TYPE SYNTAX INTEGER { localDoubleLoopEnable(1), localDoubleLoopDisable(2), remoteDoubleLoopEnable(3), remoteDoubleLoopDisable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " E1的环回状态：1:本地环回，2：无本地环回，3：远端环回，4：无远端环回， 5:无环回， 6：本地内环使能，7：本地外环使能，8：本地双向环使能， 9:远端内环使能，10：远端外环使能，11：远端双向环使能， 12：本地内环禁止，13:本地外环禁止，14：本地双向环禁止， 15：远端内环禁止，16：远端外环禁止，17：远端双向环禁止， " ::= { rcftRemoteDeviceE1Entry 22 } rcftRemoteE1OrderTimeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块E1口发送命令时所需要赋的时长参数。 1: 测试时长1分钟 2: 测试时长2分钟 3: 测试时长4分钟 4: 测试时长8分钟 5: 测试时长15分钟 6: 测试时长30分钟 7: 测试时长60分钟 18: 测试2帧 19: 测试5帧 20: 测试10帧 21: 测试20帧 22: 测试50帧 23: 测试100帧 " ::= { rcftRemoteDeviceE1Entry 23 } rcftRemoteE1OrderModeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块E1口发送命令时所需要赋的模式参数。 " ::= { rcftRemoteDeviceE1Entry 24 } rcftRemoteE1Order OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 注意：rcftRemoteE1Order的枚举值要和rcftRemoteDeviceOrder始终保持完全一致。 " ::= { rcftRemoteDeviceE1Entry 25 } rcftRemoteE1PortType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 表示E1的类型。这个节点主要是针对约定四而增加，用来区分多种E1子块 下各个E1的具体类型。 1：既可以为成帧，又可为非成帧（对应约定四中的0x10-0x04子块） 2：非成帧（对应约定四中的0x10-0x06子块） " ::= { rcftRemoteDeviceE1Entry 26 } rcftRemoteE1BertStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT3 BERT_STATUS 0:正常工作； 1:正在bert BIT2-1 BERT_RESULT 00:未测试 01:测试正常； 10:测试失败 BIT0 BERT_TYPE 0:误码率方式； 1:误码时间方式 " ::= {rcftRemoteDeviceE1Entry 27} rcftRemoteE1BertTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试时间，时间随测试的进行而增长，单位 S. " ::= {rcftRemoteDeviceE1Entry 28} rcftRemoteE1BertErrCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:误码数，单位是bit " ::= {rcftRemoteDeviceE1Entry 29} rcftRemoteE1BertUnusedTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试不可用时间，超过255秒后维持255秒不变，单位是S. " ::= {rcftRemoteDeviceE1Entry 30} rcftRemoteE1BertPortSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试的端口速率，单位：kbps。 " ::= {rcftRemoteDeviceE1Entry 31} rcftRemoteE1BertCodeType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 误码率方式:测试码型，最大值为127 0000001'b：215-1； 其它：保留。 " ::= {rcftRemoteDeviceE1Entry 32} rcftRemoteE1BertCodeNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 误码率方式:测试码数,最大值为127 0000001'b：2的31次方个码； 0000010'b：2的28次方个码； 0000011'b：2的25次方个码； 0000100'b：2的21次方个码； 1111111'b：测试不停； 其它：保留。 " ::= {rcftRemoteDeviceE1Entry 33} rcftRemoteE1LoopSwitchStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " E1的环回状态（是拨码的状态而非实际状态，通常不用）： 1:本地环回，2：无本地环回，3：远端环回，4：无远端环回， 5:无环回， 6：本地内环使能，7：本地外环使能，8：本地双向环使能， 9:远端内环使能，10：远端外环使能，11：远端双向环使能， 12：本地内环禁止，13:本地外环禁止，14：本地双向环禁止， 15：远端内环禁止，16：远端外环禁止，17：远端双向环禁止， " ::= { rcftRemoteDeviceE1Entry 34 } rcftRemoteE1AlarmRejest OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " E1告警屏蔽 1：屏蔽 2：不屏蔽 " ::= { rcftRemoteDeviceE1Entry 35 } rcftRemoteT1AlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 本地T1告警 Bit1 AIS 0：告警， 1：正常 Bit0 LOS 0：告警； 1：正常。 " ::= { rcftRemoteDeviceE1Entry 36 } rcftRemoteE1PortVCGNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 接口属于哪个VCG成员。 0：不是VCG成员。 1~N：表示属与哪个VCG成员。 " ::= { rcftRemoteDeviceE1Entry 37 } rcftRemoteE1ToLNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 对端E1编号。 " ::= { rcftRemoteDeviceE1Entry 38 } rcftRemoteE1CVCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " E1编码违例统计。0~65535，累加值，非读清 " ::= { rcftRemoteDeviceE1Entry 39 } rcftRemoteE1StatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteE1StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 远端设备E1端口的统计表. " ::= {rcftRemoteDeviceE1Objects 2} rcftRemoteE1StatisticEntry OBJECT-TYPE SYNTAX RcftRemoteE1StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " E1接口的性能统计表 " AUGMENTS { rcftRemoteDeviceE1Entry } ::= {rcftRemoteE1StatisticTable 1} RcftRemoteE1StatisticEntry ::= SEQUENCE { rcftRemoteE1TxPackets Counter32, rcftRemoteE1TxBytes Counter32, rcftRemoteE1RxPackets Counter32, rcftRemoteE1RxBytes Counter32, rcftRemoteE1RxERRPackets Counter32, rcftRemoteE1FluxTimer Counter32, rcftRemoteE1LANTxPackets Counter32, rcftRemoteE1LANRxPackets Counter32, rcftRemoteE1LANRxLosPackets Counter32 } rcftRemoteE1TxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口发送以太网包数 " ::= { rcftRemoteE1StatisticEntry 1 } rcftRemoteE1TxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口发送以太网字节数 " ::= { rcftRemoteE1StatisticEntry 2 } rcftRemoteE1RxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口接收以太网包数 " ::= { rcftRemoteE1StatisticEntry 3 } rcftRemoteE1RxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口接收以太网字节数 " ::= { rcftRemoteE1StatisticEntry 4 } rcftRemoteE1RxERRPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口接收错误以太网包数 " ::= { rcftRemoteE1StatisticEntry 5 } rcftRemoteE1FluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口流量统计的时间 " ::= { rcftRemoteE1StatisticEntry 6 } rcftRemoteE1LANTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口LAN侧发送以太网包数 " ::= { rcftRemoteE1StatisticEntry 7 } rcftRemoteE1LANRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口LAN侧接收以太网包数 " ::= { rcftRemoteE1StatisticEntry 8 } rcftRemoteE1LANRxLosPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备E1端口LAN侧接收丢失以太网包数 " ::= { rcftRemoteE1StatisticEntry 9 } ---以下是远端设备系统的TRAP定义-- rcftRemoteDevExistTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDeviceExist } STATUS current DESCRIPTION " 远端板卡在位状态变化告警，当远端板卡由在位到丢失时发送告警， 远端板卡由丢失到恢复在位时发送告警恢复. " ::={rcftRemoteDeviceSysTraps 1} rcftRemoteDevVoltTooHighTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSysVoltageStatus } STATUS current DESCRIPTION " 远端设备电压超出阀值时发送该告警 " ::={rcftRemoteDeviceSysTraps 2} rcftRemoteDevVoltTooLowTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSysVoltageStatus } STATUS current DESCRIPTION " 远端设备电压超出阀值时发送该告警 " ::={rcftRemoteDeviceSysTraps 3} rcftRemoteDevTmptTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteSysTemperature } STATUS current DESCRIPTION " 远端模块所在机箱温度告警及恢复：当远端模块所在机箱温度高于门限值时发送告警， 当恢复到门限值范围内时发送告警恢复。 " ::={ rcftRemoteDeviceSysTraps 4} rcftRemoteDevPowerDownTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDevicePowerDown } STATUS current DESCRIPTION " 远端模块所接远端远端设备的掉电告警及恢复。 " ::={ rcftRemoteDeviceSysTraps 5} rcftRemoteDevPSChannelTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDeviceStatus } STATUS current DESCRIPTION " 主用通道切换到备用通道告警（没有恢复）。 " ::={ rcftRemoteDeviceSysTraps 6} rcftRemoteDevSPChannelTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDeviceStatus } STATUS current DESCRIPTION " 备用通道切换到主用通道告警（没有恢复）。 " ::={ rcftRemoteDeviceSysTraps 7} ---以下是远端设备电口的TRAP定义-- rcftRemoteEthFeLinkTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteEthFeLinkStatus } STATUS current DESCRIPTION " 远端设备电口link状态变化告警及恢复. 当电口link状态由up变down时发送告警，由down变up时发送告警恢复. The change of the link status of the eth port in the local module will generate this trap. " ::= { rcftRemoteDeviceEthFeTraps 1 } ---以下是远端设备光口的TRAP定义-- rcftRemoteEthFxPortRLKTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxPortRLK } STATUS current DESCRIPTION " 本模块光口接收方向的link状态(1：linkup，2：linkdown). The object indicating the status of the optical port in the receiving direction. When the value is 1 the optical port link up,otherwise link down. " ::= { rcftRemoteDeviceEthFxTraps 1 } rcftRemoteEthFxPortTLKTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxPortTLK } STATUS current DESCRIPTION " 远端设备光口发送方向的link状态(1：linkup，2：linkdown). The object indicating the status of the optical port in the receiving direction. When the value is 1 the optical port link up,otherwise link down. " ::= { rcftRemoteDeviceEthFxTraps 2 } rcftRemoteEthFxPortTxPowerTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteEthFxPortTxPowerAbnormal } STATUS current DESCRIPTION " 本端发送光功率变化告警. " ::={ rcftRemoteDeviceEthFxTraps 3 } rcftRemoteEthFxPortRxSensitiveTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteEthFxPortRxSensitiveAbnormal } STATUS current DESCRIPTION " 本端接收灵敏度变化告警. " ::={ rcftRemoteDeviceEthFxTraps 4 } rcftRemoteEthFxPortLaserTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteEthFxPortLaserAbnormal } STATUS current DESCRIPTION " 本端激光管工作状态变化告警. " ::={ rcftRemoteDeviceEthFxTraps 5 } rcftRemoteEthFxPortSDTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteEthFxPortSD } STATUS current DESCRIPTION " 本地光模块SD输出信号异常告警和恢复. 当rcftSlotOSD的状态值发生变化时 发送该trap. 是告警还是恢复由绑定的对象rcftSlotOSD的状态值决定： 1: 恢复， 2：告警 " ::={ rcftRemoteDeviceEthFxTraps 6 } rcftRemoteEthFxPortLinkTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxPortLink } STATUS current DESCRIPTION " 远端设备光口的link状态(1：linkup，2：linkdown). The object indicating the status of the optical port. When the value is 1 the optical port link up,otherwise link down. " ::= { rcftRemoteDeviceEthFxTraps 7 } rcftRemoteEthFxPortExitTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxPortExist } STATUS current DESCRIPTION " 光模块在位trap。 1：在位，2：不在位 " ::= { rcftRemoteDeviceEthFxTraps 8 } rcftRemoteEthFxPortTempHighTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断温度超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 9 } rcftRemoteEthFxPortTempLowTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断温度超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 10 } rcftRemoteEthFxPortVoltageHighTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断电压超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 11 } rcftRemoteEthFxPortVoltageLowTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断电压超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 12 } rcftRemoteEthFxPortOffsetCurrHighTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断偏置电流超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 13 } rcftRemoteEthFxPortOffsetCurrLowTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断偏置电流超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 14 } rcftRemoteEthFxPortSendPowerHighTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断发送功率超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 15 } rcftRemoteEthFxPortSendPowerLowTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断发送功率超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 16 } rcftRemoteEthFxPortRecvPowerHighTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断接收功率超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 17 } rcftRemoteEthFxPortRecvPowerLowTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断接收功率超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 18 } rcftRemoteEthFxPortRemotePowerDownTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " 远端掉电告警 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 19 } rcftRemoteEthFxPortInputSignalLosTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxPortSFPInfo } STATUS current DESCRIPTION " SFP输入信息丢失 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 20 } rcftRemoteEthFxPortTempHighWarnning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoAlarmStatus } STATUS current DESCRIPTION " sfp光模块数字诊断温度超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 21 } rcftRemoteEthFxPortTempLowWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断温度超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 22 } rcftRemoteEthFxPortVoltageHighWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断电压超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 23 } rcftRemoteEthFxPortVoltageLowWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断电压超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 24 } rcftRemoteEthFxPortOffsetCurrHighWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断偏置电流超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 25 } rcftRemoteEthFxPortOffsetCurrLowWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断偏置电流超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 26 } rcftRemoteEthFxPortSendPowerHighWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断发送功率超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 27 } rcftRemoteEthFxPortSendPowerLowWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断发送功率超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 28 } rcftRemoteEthFxPortRecvPowerHighWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断接收功率超高 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 29 } rcftRemoteEthFxPortRecvPowerLowWarning NOTIFICATION-TYPE OBJECTS{ rcftRemoteEthFxSFPDiagnoWarningStatus } STATUS current DESCRIPTION " sfp光模块数字诊断接收功率超低 1：恢复，2：告警 " ::= { rcftRemoteDeviceEthFxTraps 30 } rcftRemoteDevE1LOSTRAP NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1信号消失告警 " ::={ rcftRemoteDeviceE1Traps 1} rcftRemoteDevE1LOFTRAP NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路LOF告警 " ::={ rcftRemoteDeviceE1Traps 2} rcftRemoteDevE1CRCTRAP NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路CRC告警 " ::={ rcftRemoteDeviceE1Traps 3} rcftRemoteDevE1AISTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路AIS告警. " ::= { rcftRemoteDeviceE1Traps 4 } rcftRemoteDevE1TransErrorCodeMore10E-3 NOTIFICATION-TYPE OBJECTS{ rcftRemoteE1TransErrorCode } STATUS current DESCRIPTION " 远端设备光传输误码率大于10E-3告警 " ::= { rcftRemoteDeviceE1Traps 5 } rcftRemoteDevE1TransErrorCodeMore10E-6 NOTIFICATION-TYPE OBJECTS{ rcftRemoteE1TransErrorCode } STATUS current DESCRIPTION " 远端设备光传输误码率大于10E-6告警 " ::= { rcftRemoteDeviceE1Traps 6 } rcftRemoteDevToLocalDevE1LOSTRAP NOTIFICATION-TYPE OBJECTS { rcftRemoteToLocalE1AlarmStatus } STATUS current DESCRIPTION " 远端设备收到的其对端设备E1信号消失告警 " ::={ rcftRemoteDeviceE1Traps 7} rcftRemoteDevToLocalDevE1LOFTRAP NOTIFICATION-TYPE OBJECTS { rcftRemoteToLocalE1AlarmStatus } STATUS current DESCRIPTION " 远端设备收到的其对端设备E1线路LOF告警 " ::={ rcftRemoteDeviceE1Traps 8} rcftRemoteDevToLocalDevE1CRCTRAP NOTIFICATION-TYPE OBJECTS { rcftRemoteToLocalE1AlarmStatus } STATUS current DESCRIPTION " 远端设备收到的其对端设备E1线路CRC告警 " ::={ rcftRemoteDeviceE1Traps 9} rcftRemoteDevToLocalDevE1AISTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteToLocalE1AlarmStatus } STATUS current DESCRIPTION " 远端设备收到的其对端设备E1线路AIS告警. " ::= { rcftRemoteDeviceE1Traps 10 } rcftRemoteDevE1CVTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路CV告警. " ::= { rcftRemoteDeviceE1Traps 11 } rcftRemoteDevE1LOMFTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路LOMF告警. " ::= { rcftRemoteDeviceE1Traps 12 } rcftRemoteDevT1LOSTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteT1AlarmStatus } STATUS current DESCRIPTION " 远端设备T1线路LOS告警. " ::= { rcftRemoteDeviceE1Traps 13 } rcftRemoteDevT1AISTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteT1AlarmStatus } STATUS current DESCRIPTION " 远端设备T1线路AIS告警. " ::= { rcftRemoteDeviceE1Traps 14 } rcftRemoteDevE1TSDTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路TSD告警. " ::= { rcftRemoteDeviceE1Traps 15 } rcftRemoteE1PortToLTSDTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备的对端E1线路TSD告警. " ::= { rcftRemoteDeviceE1Traps 16 } rcftRemoteDevE1RDITrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备E1线路RDI告警，当其对端出现LOS、AIS、LOF中的任何一个时，引发本地RDI告警. " ::= { rcftRemoteDeviceE1Traps 17 } rcftRemoteE1PortToLLOMFTrap NOTIFICATION-TYPE OBJECTS { rcftRemoteE1AlarmStatus } STATUS current DESCRIPTION " 远端设备的对端E1线路 LOMF 告警. " ::= { rcftRemoteDeviceE1Traps 18 } --------------------------G.端口的对象--------------------------------- rcftRemoteSHDSLPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteSHDSLPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The SDHSL PORT table. " ::= { rcftRemoteSHDSLPortObjects 1 } rcftRemoteSHDSLPortEntry OBJECT-TYPE SYNTAX RcftRemoteSHDSLPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the SHDSL PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex,rcftRemoteSHDSLPortIndex } ::= { rcftRemoteSHDSLPortTable 1 } RcftRemoteSHDSLPortEntry ::= SEQUENCE { rcftRemoteSHDSLPortIndex Integer32, rcftRemoteSHDSLPortAlarmStatus INTEGER, rcftRemoteSHDSLPortStatus INTEGER, rcftRemoteSHDSLPortCapableSpeed INTEGER, rcftRemoteSHDSLPortWorkSpeed INTEGER, rcftRemoteSHDSLPortProbeMaxSpeed INTEGER, rcftRemoteSHDSLPortProbeMinSpeed INTEGER, rcftRemoteSDHSLPortSNR INTEGER, rcftRemoteSHDSLPortConfigSNR INTEGER, rcftRemoteSHDSLPortSNRThreshold INTEGER, rcftRemoteSHDSLPortAttenuation INTEGER, rcftRemoteSHDSLPortAttenuationThreshold INTEGER, rcftRemoteSHDSLPortPBO INTEGER, rcftRemoteSHDSLPortLOSThreshold INTEGER, rcftRemoteSHDSLPortLOSWThreshold INTEGER, rcftRemoteSHDSLPortLOLKThreshold INTEGER, rcftRemoteSHDSLPortESThreshold INTEGER, rcftRemoteSHDSLPortLoopStatus INTEGER, rcftRemoteSHDSLPortAttenuationInitThreshhold INTEGER, rcftRemoteSHDSLPortOrderTimeParameter INTEGER, rcftRemoteSHDSLPortOrderModeParameter INTEGER, rcftRemoteSHDSLPortOrder INTEGER, rcftRemoteSHDSLPortPBOAmount INTEGER, rcftRemoteSHDSLBertStatus INTEGER, rcftRemoteSHDSLBertTime Unsigned32, rcftRemoteSHDSLBertErrCode Unsigned32, rcftRemoteSHDSLBertUnusedTime Unsigned32, rcftRemoteSHDSLBertPortSpeed Unsigned32, rcftRemoteSHDSLBertCodeType INTEGER, rcftRemoteSHDSLBertCodeNum INTEGER, rcftRemoteSHDSLLoopStatus INTEGER } rcftRemoteSHDSLPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " G.口的索引 " ::= { rcftRemoteSHDSLPortEntry 1 } rcftRemoteSHDSLPortAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口的告警状态。 BIT5: SHDSL-LOS SHDSL端口LOS时该位清0，否则置1。 BIT4: SHDSL-LOSW SHDSL端口LOSW时该位清0，否则置1。 BIT3: SHDSL-Link SHDSL端口为link up状态该位置1，否则清0。 BIT2: 保留 固定为0'b。 BIT1: FEC SHDSL端口有FEC错误时该位清0，否则置1。 BIT0: CRC SHDSL端口有CRC错误时该位清0，否则置1。 " ::= { rcftRemoteSHDSLPortEntry 2 } rcftRemoteSHDSLPortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口的状态。 BIT23-22 IN_LBK-Test 00：没有进行过环回测试； 01：保留；10：内环测试成功；11：内环测试失败。 BIT21-20 EX_LBK-Test 00：没有进行过环回测试； 01：保留；10：外环测试成功；11：外环测试失败。 BIT19-16 保留 BIT15-14 Port_En 00：端口开；01：端口关；10：因故障转移关（无）；11：保留。 BIT13 LOC_FP_EN 1：使能本地xx端口故障向SHDSL口转移； 0：禁止。 BIT12 REM_FP_EN 1：使能远端xx端口故障向SHDSL口转移； 0：禁止。 BIT11 BOOT状态 0：BOOT失败；1：BOOT成功。 BIT10-9 保留 BIT8： SHDSL-synClock: 0:同步时钟， 1：准同步时钟 BIT7-6 编码方式 00'b：TC-4PAM； 01'b：TC-16PAM；10'b：TC-32PAM。11'b：保留。 BIT5-4 SHDSL-Annex SHDSL端口采用AnnexA时：01b；为AnnexB时：10b；为AnnexF时：11b。 BIT3 SHDSL-PSD SHDSL端口采用对称PSD时该位置1，非对称PSD时清0。 BIT2 SHDSL-Port-En SHDSL端口为打开状态该位置1，为关闭状态则清0。 BIT1 SHDSL-LineProbe SHDSL端口为线路探测使能方式该位置1；否则清0。网管不需要处理！ BIT0 STU-C SHDSL端口工作于STU-C模式时该位置1，否则清0。 " ::= { rcftRemoteSHDSLPortEntry 3 } rcftRemoteSHDSLPortCapableSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最大可用速率,单位为64Kbps。 " ::= { rcftRemoteSHDSLPortEntry 4 } rcftRemoteSHDSLPortWorkSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口的工作速率,单位为64Kbps。 " ::= { rcftRemoteSHDSLPortEntry 5 } rcftRemoteSHDSLPortProbeMaxSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口处于线路探测方式时配置的允许最高速率,单位为64Kbps。 " ::= { rcftRemoteSHDSLPortEntry 6 } rcftRemoteSHDSLPortProbeMinSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口处于线路探测方式时配置的允许最低速率,单位为64Kbps。 " ::= { rcftRemoteSHDSLPortEntry 7 } rcftRemoteSDHSLPortSNR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口正常工作时的SNR（信噪比）,单位为0.5dB。是有符号数，有可能是负数。 " ::= { rcftRemoteSHDSLPortEntry 8 } rcftRemoteSHDSLPortConfigSNR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口初始设置的SNR（信噪比）,单位为0.5dB。当linkup的瞬间G.口工作的SNR必须大于该 初始值，之后rcftSDHSLPortSNR可以小于该初始值。是有符号数，有可能是负数。 " ::= { rcftRemoteSHDSLPortEntry 9 } rcftRemoteSHDSLPortSNRThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口SNR（信噪比）的门限值,单位为0.5dB。 当rcftSDHSLPortSNR小于该值时,AGENT发送告警。是有符号数，有可能是负数。 " ::= { rcftRemoteSHDSLPortEntry 10 } rcftRemoteSHDSLPortAttenuation OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口的线路衰减值,单位为0.5dB。 " ::= { rcftRemoteSHDSLPortEntry 11 } rcftRemoteSHDSLPortAttenuationThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口线路衰减值的门限值,单位为0.5dB。当RcftRemoteSHDSLPortAttenuation小于该门限值时 AGENT发送告警。 " ::= { rcftRemoteSHDSLPortEntry 12 } rcftRemoteSHDSLPortPBO OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口线路功率回退结果 BIT7 Valid 结果值有意义时为1，否则清0（0-6位无意义）。 BIT6 PBO_AUTO PBO自动设置时该位置1，PBO固定设置则清0。 BIT5-4 保留 固定为00'b。 BIT3-0 PBO值 PBO实际值，单位为dB。 " ::= { rcftRemoteSHDSLPortEntry 13 } rcftRemoteSHDSLPortLOSThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 当前15分钟LOS次数告警门限。取值范围是0-255。 " ::= { rcftRemoteSHDSLPortEntry 14 } rcftRemoteSHDSLPortLOSWThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 当前15分钟LOSW次数告警门限。取值范围是0-255。 " ::= { rcftRemoteSHDSLPortEntry 15 } rcftRemoteSHDSLPortLOLKThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 当前15分钟LOLK(linkdown)次数告警门限。取值范围是0-255。 " ::= { rcftRemoteSHDSLPortEntry 16 } rcftRemoteSHDSLPortESThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 当前15分钟误码秒告警门限。取值范围是0-255。 " ::= { rcftRemoteSHDSLPortEntry 17 } rcftRemoteSHDSLPortLoopStatus OBJECT-TYPE SYNTAX INTEGER { insideLoop(1), outsideLoop(2), doubleloop(3), normal(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " G.口的环回状态:1：内环，2：外环，3：内环外环同时存在,100：正常 " ::= { rcftRemoteSHDSLPortEntry 18 } rcftRemoteSHDSLPortAttenuationInitThreshhold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " G.口的环路衰减初始门限值，单位为0.5dB。 " ::= { rcftRemoteSHDSLPortEntry 19 } rcftRemoteSHDSLPortOrderTimeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块G.口发送命令时所需要赋的时长参数。 1: 测试时长1分钟 2: 测试时长2分钟 3: 测试时长4分钟 4: 测试时长8分钟 5: 测试时长15分钟 6: 测试时长30分钟 7: 测试时长60分钟 18: 测试2帧 19: 测试5帧 20: 测试10帧 21: 测试20帧 22: 测试50帧 23: 测试100帧 " ::= { rcftRemoteSHDSLPortEntry 20 } rcftRemoteSHDSLPortOrderModeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块G.口发送命令时所需要赋的模式参数。 " ::= { rcftRemoteSHDSLPortEntry 21 } rcftRemoteSHDSLPortOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 " ::= { rcftRemoteSHDSLPortEntry 22 } rcftRemoteSHDSLPortPBOAmount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " PBO实际值，单位为dB。 " ::= { rcftRemoteSHDSLPortEntry 23 } rcftRemoteSHDSLBertStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT3 BERT_STATUS 0:正常工作； 1:正在bert BIT2-1 BERT_RESULT 00:未测试 01:测试正常； 10:测试失败 BIT0 BERT_TYPE 0:误码率方式； 1:误码时间方式 " ::= {rcftRemoteSHDSLPortEntry 24} rcftRemoteSHDSLBertTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试时间，时间随测试的进行而增长,单位 S. " ::= {rcftRemoteSHDSLPortEntry 25} rcftRemoteSHDSLBertErrCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:误码数，单位是bit " ::= {rcftRemoteSHDSLPortEntry 26} rcftRemoteSHDSLBertUnusedTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试不可用时间，超过255秒后维持255秒不变，单位是S. " ::= {rcftRemoteSHDSLPortEntry 27} rcftRemoteSHDSLBertPortSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试的端口速率，单位：kbps。 " ::= {rcftRemoteSHDSLPortEntry 28} rcftRemoteSHDSLBertCodeType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 误码率方式:测试码型，最大值为127 0000001'b：2-15-1； 其它：保留。 " ::= {rcftRemoteSHDSLPortEntry 29} rcftRemoteSHDSLBertCodeNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 误码率方式:测试码数 0000001'b：2的31次方个码； 0000010'b：2的28次方个码； 0000011'b：2的25次方个码； 0000100'b：2的21次方个码； 1111111'b：测试不停； 其它：保留。 " ::= {rcftRemoteSHDSLPortEntry 30} rcftRemoteSHDSLLoopStatus OBJECT-TYPE SYNTAX INTEGER { localDoubleLoopEnable(1), localDoubleLoopDisable(2), remoteDoubleLoopEnable(3), remoteDoubleLoopDisable(4), normal(5), localInSideLoopEnale(6), localOutSideLoopEnable(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " G.口的环回状态：1:本地环回，2：无本地环回，3：远端环回，4：无远端环回， 5:无环回， 6：本地内环使能，7：本地外环使能，8：本地双向环使能， 9:远端内环使能，10：远端外环使能，11：远端双向环使能， 12：本地内环禁止，13:本地外环禁止，14：本地双向环禁止， 15：远端内环禁止，16：远端外环禁止，17：远端双向环禁止， " ::= {rcftRemoteSHDSLPortEntry 31} rcftRemoteSHDSLPortCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteSHDSLPortCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口当前15分钟的性能统计表 " ::= { rcftRemoteSHDSLPortPerformance 1 } rcftRemoteSHDSLPortCurrentEntry OBJECT-TYPE SYNTAX RcftRemoteSHDSLPortCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口当前15分钟的性能统计表 " INDEX{ rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex,rcftRemoteSHDSLPortIndex } ::= { rcftRemoteSHDSLPortCurrentTable 1 } RcftRemoteSHDSLPortCurrentEntry ::= SEQUENCE{ rcftRemoteSHDSLPortCurrentLOSTimes INTEGER, rcftRemoteSHDSLPortCurrentLOSWTimes INTEGER, rcftRemoteSHDSLPortCurrentLOLKTimes INTEGER, rcftRemoteSHDSLPortCurrentCVTimes INTEGER, rcftRemoteSHDSLPortCurrentES INTEGER, rcftRemoteSHDSLPortCurrentSES INTEGER, rcftRemoteSHDSLPortCurrentUAS INTEGER, rcftRemoteSHDSLPortCurrentLOSWS INTEGER, rcftRemoteSHDSLPortCurrentCRCTimes INTEGER } rcftRemoteSHDSLPortCurrentLOSTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的LOS次数 " ::= { rcftRemoteSHDSLPortCurrentEntry 1 } rcftRemoteSHDSLPortCurrentLOSWTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的LOSW次数 " ::= { rcftRemoteSHDSLPortCurrentEntry 2 } rcftRemoteSHDSLPortCurrentLOLKTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的LINK DOWN的次数 " ::= { rcftRemoteSHDSLPortCurrentEntry 3 } rcftRemoteSHDSLPortCurrentCVTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的CV的次数 " ::= { rcftRemoteSHDSLPortCurrentEntry 4 } rcftRemoteSHDSLPortCurrentES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的误码秒数 " ::= { rcftRemoteSHDSLPortCurrentEntry 5 } rcftRemoteSHDSLPortCurrentSES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的严重误码秒数 " ::= { rcftRemoteSHDSLPortCurrentEntry 6 } rcftRemoteSHDSLPortCurrentUAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的不可用秒数 " ::= { rcftRemoteSHDSLPortCurrentEntry 7 } rcftRemoteSHDSLPortCurrentLOSWS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的LOSW秒数 " ::= { rcftRemoteSHDSLPortCurrentEntry 8 } rcftRemoteSHDSLPortCurrentCRCTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前15分钟的CRC的次数 " ::= { rcftRemoteSHDSLPortCurrentEntry 9 } rcftRemoteSHDSLPortIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteSHDSLPortIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口最近若干个15分钟的性能统计表 " ::= { rcftRemoteSHDSLPortPerformance 2 } rcftRemoteSHDSLPortIntervalEntry OBJECT-TYPE SYNTAX RcftRemoteSHDSLPortIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口最近若干个15分钟的性能统计表 " INDEX{ rcftChassisIndex, rcftSlotIndex ,rcftRemoteDeviceIndex ,rcftRemoteSHDSLPortIndex,rcftRemoteSHDSLPortIntervalNumber } ::= { rcftRemoteSHDSLPortIntervalTable 1 } RcftRemoteSHDSLPortIntervalEntry ::= SEQUENCE{ rcftRemoteSHDSLPortIntervalNumber INTEGER, rcftRemoteSHDSLPortIntervalLOSTimes INTEGER, rcftRemoteSHDSLPortIntervalLOSWTimes INTEGER, rcftRemoteSHDSLPortIntervalLOLKTimes INTEGER, rcftRemoteSHDSLPortIntervalCVTimes INTEGER, rcftRemoteSHDSLPortIntervalES INTEGER, rcftRemoteSHDSLPortIntervalSES INTEGER, rcftRemoteSHDSLPortIntervalUAS INTEGER, rcftRemoteSHDSLPortIntervalLOSWS INTEGER, rcftRemoteSHDSLPortIntervalCRCTimes INTEGER } rcftRemoteSHDSLPortIntervalNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近的第几个15分钟 " ::= { rcftRemoteSHDSLPortIntervalEntry 1 } rcftRemoteSHDSLPortIntervalLOSTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的LOS次数 " ::= { rcftRemoteSHDSLPortIntervalEntry 2 } rcftRemoteSHDSLPortIntervalLOSWTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的LOSW次数 " ::= { rcftRemoteSHDSLPortIntervalEntry 3 } rcftRemoteSHDSLPortIntervalLOLKTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的LINK DOWN的次数 " ::= { rcftRemoteSHDSLPortIntervalEntry 4 } rcftRemoteSHDSLPortIntervalCVTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的CV的次数 " ::= { rcftRemoteSHDSLPortIntervalEntry 5 } rcftRemoteSHDSLPortIntervalES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的误码秒数 " ::= { rcftRemoteSHDSLPortIntervalEntry 6 } rcftRemoteSHDSLPortIntervalSES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的严重误码秒数 " ::= { rcftRemoteSHDSLPortIntervalEntry 7 } rcftRemoteSHDSLPortIntervalUAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的不可用秒数 " ::= { rcftRemoteSHDSLPortIntervalEntry 8 } rcftRemoteSHDSLPortIntervalLOSWS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的LOSW秒数 " ::= { rcftRemoteSHDSLPortIntervalEntry 9 } rcftRemoteSHDSLPortIntervalCRCTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个15分钟的CRC的次数 " ::= { rcftRemoteSHDSLPortIntervalEntry 10 } rcftRemoteSHDSLPortCurrentDayTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteSHDSLPortCurrentDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口当前24小时的性能统计表 " ::= { rcftRemoteSHDSLPortPerformance 3 } rcftRemoteSHDSLPortCurrentDayEntry OBJECT-TYPE SYNTAX RcftRemoteSHDSLPortCurrentDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口当前24小时的性能统计表 " INDEX{ rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex,rcftRemoteSHDSLPortIndex } ::= { rcftRemoteSHDSLPortCurrentDayTable 1 } RcftRemoteSHDSLPortCurrentDayEntry ::= SEQUENCE{ rcftRemoteSHDSLPortCurrentDayLOSTimes INTEGER, rcftRemoteSHDSLPortCurrentDayLOSWTimes INTEGER, rcftRemoteSHDSLPortCurrentDayLOLKTimes INTEGER, rcftRemoteSHDSLPortCurrentDayCVTimes INTEGER, rcftRemoteSHDSLPortCurrentDayES INTEGER, rcftRemoteSHDSLPortCurrentDaySES INTEGER, rcftRemoteSHDSLPortCurrentDayUAS INTEGER, rcftRemoteSHDSLPortCurrentDayLOSWS INTEGER, rcftRemoteSHDSLPortCurrentDayCRCTimes INTEGER } rcftRemoteSHDSLPortCurrentDayLOSTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的LOS次数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 1 } rcftRemoteSHDSLPortCurrentDayLOSWTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的LOSW次数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 2 } rcftRemoteSHDSLPortCurrentDayLOLKTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的LINK DOWN的次数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 3 } rcftRemoteSHDSLPortCurrentDayCVTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的CV的次数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 4 } rcftRemoteSHDSLPortCurrentDayES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的误码秒数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 5 } rcftRemoteSHDSLPortCurrentDaySES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的严重误码秒数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 6 } rcftRemoteSHDSLPortCurrentDayUAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的不可用秒数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 7 } rcftRemoteSHDSLPortCurrentDayLOSWS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的LOSW秒数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 8 } rcftRemoteSHDSLPortCurrentDayCRCTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口当前24小时的CRC的次数 " ::= { rcftRemoteSHDSLPortCurrentDayEntry 9 } rcftRemoteSHDSLPortIntervalDayTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteSHDSLPortIntervalDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口最近若干个24小时的性能统计表 " ::= { rcftRemoteSHDSLPortPerformance 4 } rcftRemoteSHDSLPortIntervalDayEntry OBJECT-TYPE SYNTAX RcftRemoteSHDSLPortIntervalDayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " G.口最近若干个24小时的性能统计表 " INDEX{ rcftChassisIndex, rcftSlotIndex,rcftRemoteDeviceIndex ,rcftRemoteSHDSLPortIndex,rcftRemoteSHDSLPortIntervalDayNumber } ::= { rcftRemoteSHDSLPortIntervalDayTable 1 } RcftRemoteSHDSLPortIntervalDayEntry ::= SEQUENCE{ rcftRemoteSHDSLPortIntervalDayNumber INTEGER, rcftRemoteSHDSLPortIntervalDayLOSTimes INTEGER, rcftRemoteSHDSLPortIntervalDayLOSWTimes INTEGER, rcftRemoteSHDSLPortIntervalDayLOLKTimes INTEGER, rcftRemoteSHDSLPortIntervalDayCVTimes INTEGER, rcftRemoteSHDSLPortIntervalDayES INTEGER, rcftRemoteSHDSLPortIntervalDaySES INTEGER, rcftRemoteSHDSLPortIntervalDayUAS INTEGER, rcftRemoteSHDSLPortIntervalDayLOSWS INTEGER, rcftRemoteSHDSLPortIntervalDayCRCTimes INTEGER } rcftRemoteSHDSLPortIntervalDayNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近的第几个24小时 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 1 } rcftRemoteSHDSLPortIntervalDayLOSTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的LOS次数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 2 } rcftRemoteSHDSLPortIntervalDayLOSWTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的LOSW次数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 3 } rcftRemoteSHDSLPortIntervalDayLOLKTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的LINK DOWN的次数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 4 } rcftRemoteSHDSLPortIntervalDayCVTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的CV的次数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 5 } rcftRemoteSHDSLPortIntervalDayES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的误码秒数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 6 } rcftRemoteSHDSLPortIntervalDaySES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的严重误码秒数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 7 } rcftRemoteSHDSLPortIntervalDayUAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的不可用秒数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 8 } rcftRemoteSHDSLPortIntervalDayLOSWS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的LOSW秒数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 9 } rcftRemoteSHDSLPortIntervalDayCRCTimes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " G.口最近第几个24小时的CRC的次数 " ::= { rcftRemoteSHDSLPortIntervalDayEntry 10 } ----------远端设备G.口的告警--------------------- rcftRemoteSHDSLPortLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortAlarmStatus } STATUS current DESCRIPTION " 远端设备上G.口的LOS告警 " ::= { rcftRemoteSHDSLPortTraps 1 } rcftRemoteSHDSLPortLOSWTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortAlarmStatus } STATUS current DESCRIPTION " 远端设备上G.口的LOSW告警 " ::= { rcftRemoteSHDSLPortTraps 2 } rcftRemoteSHDSLPortLINKTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortAlarmStatus } STATUS current DESCRIPTION " 远端设备上G.口的LINK告警 " ::= { rcftRemoteSHDSLPortTraps 3 } rcftRemoteSHDSLPortFECTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortAlarmStatus } STATUS current DESCRIPTION " 远端设备上G.口的FEC告警 " ::= { rcftRemoteSHDSLPortTraps 4 } rcftRemoteSHDSLPortCRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortAlarmStatus } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 5 } rcftRemoteSHDSLPortSNRThresholdTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortSNRThreshold } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 6 } rcftRemoteSHDSLPortAttenuationThresholdTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortAttenuationThreshold } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 7 } rcftRemoteSHDSLPortLOSThresholdTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortLOSThreshold } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 8 } rcftRemoteSHDSLPortLOSWThresholdTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortLOSWThreshold } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 9 } rcftRemoteSHDSLPortLOLKThresholdTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortLOLKThreshold } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 10 } rcftRemoteSHDSLPortESThresholdTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteSHDSLPortESThreshold } STATUS current DESCRIPTION " 远端设备上G.口的CRC告警 " ::= { rcftRemoteSHDSLPortTraps 11 } --------------------------V35端口的对象--------------------------------- rcftRemoteV35PortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteV35PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Remote V35 PORT table. " ::= { rcftRemoteV35PortObjects 1 } rcftRemoteV35PortEntry OBJECT-TYPE SYNTAX RcftRemoteV35PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Remote V35 PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteV35PortIndex } ::= { rcftRemoteV35PortTable 1 } RcftRemoteV35PortEntry ::= SEQUENCE { rcftRemoteV35PortIndex Integer32, rcftRemoteV35PortAlarmStatus INTEGER, rcftRemoteV35PortStatus INTEGER, rcftRemoteV35PortSpeed INTEGER, rcftRemoteV35PortOrderTimeParameter INTEGER, rcftRemoteV35PortOrderModeParameter INTEGER, rcftRemoteV35PortOrder INTEGER, rcftRemoteV35BertStatus INTEGER, rcftRemoteV35BertTime Unsigned32, rcftRemoteV35BertErrCode Unsigned32, rcftRemoteV35BertUnusedTime Unsigned32, rcftRemoteV35BertPortSpeed Unsigned32, rcftRemoteV35BertCodeType INTEGER, rcftRemoteV35BertCodeNum INTEGER, rcftRemoteV35LoopStatus INTEGER } rcftRemoteV35PortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " RemoteV35口的索引 " ::= { rcftRemoteV35PortEntry 1 } rcftRemoteV35PortAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 其它位 保留 固定000'b。 BIT12 DSR_I 1：DSR信号UP； 0：DSR信号DOWN。 BIT11 RAIS 站在本地设备上看对端V35口所占那一路E1的AIS告警 1：正常 0：告警 BIT10 RCV 站在本地设备上看对端V35口所占那一路E1的CV告警 1：正常 0：告警 BIT9 RLOF 站在本地设备上看对端V35口所占那一路E1的LOF告警 1：正常 0：告警 BIT8 AIS V35口所占那一路E1的AIS告警 1：正常 0：告警 BIT7 CV V35口所占那一路E1的CV告警 1：正常 0：告警 BIT6 LOF V35口所占那一路E1的LOF告警 1：正常 0：告警 BIT5 PATT 1：误码测试正常 0：误码测试告警 BIT4 CRC_ALARM 1：正常 0：告警 BIT3 DCD_O 1：DCD信号UP； 0：DCD信号DOWN。 BIT2 CTS_O 1：CTS信号UP； 0：CTS信号DOWN。 BIT1 DTR_I 1：DTR信号UP； 0：DTR信号DOWN。 BIT0 RTS_I 1：RTS信号UP； 0：RTS信号DOWN。 " ::= { rcftRemoteV35PortEntry 2 } rcftRemoteV35PortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT25 V35口带宽跟随：1：跟随； 0：不跟随 BIT24 V35口占用时隙的成帧模式：1：成帧； 0：透明 BIT23-22 IN_LBK-Test 00：没有进行过内环测试； 01：保留；10：内环测试成功；11：内环测试失败。 BIT21-20 EX_LBK-Test 00：没有进行过环回测试； 01：保留；10：外环测试成功；11：外环测试失败。 BIT19-18 CLOCK 00：从时钟 01：V35终端时钟，并且v35带宽不跟随 10：V35终端时钟，并且v35带宽跟随 11：主时钟 BIT17-16 LOOP_STATE 00:不环回 01：本地环回 10：远端环回 11：保留 BIT15-14 Port_En 00：端口开(DCD=0、CTS=0)；01：端口关(DCD=1、CTS=1)；10：因故障转移关； 11：保留。 BIT13 LOC_FP_EN 1：使能本地其它端口故障向V35口转移； 0：禁止。 BIT12 REM_FP_EN 1：使能远端V35口故障向V35口转移；0：禁止。 BIT11 Remote CRC_EN 站在本地上看远端V35口CRC功能 1：使能 0：禁止 BIT10 Local CRC_EN 1：使能 0：禁止 BIT9-8 接口方式 00：M34M；01：HDB26M；其它：保留。 BIT7 RCLK_AN 0：RXCLK时钟固定； 1：RXCLK时钟相位适应。 BIT6 RCLK_INV 0：RXCLK时钟正相；1：RXCLK时钟反相。 BIT5 TCLK_INV 0：TXCLK时钟正相；1：TXCLK时钟反相。 BIT4 SA_DISABLE 1：不使用SA bit 0：使用SA bit BIT3 Rate_CFG 1：时隙带宽主控 0：时隙带宽被控 BIT2 BERT_EN 1：误码测试使能 0：误码测试禁止 BIT1 DATA_V 0：输入数据中断； 1：输入数据正常。 BIT0 CLK_V 0：输入时钟异常； 1：输入时钟正常。 " ::= { rcftRemoteV35PortEntry 3 } rcftRemoteV35PortSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " V35口的速率 单位为64Kbps。 " ::= { rcftRemoteV35PortEntry 4 } rcftRemoteV35PortOrderTimeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块V35口发送命令时所需要赋的时长参数。 1: 测试时长1分钟 2: 测试时长2分钟 3: 测试时长4分钟 4: 测试时长8分钟 5: 测试时长15分钟 6: 测试时长30分钟 7: 测试时长60分钟 18: 测试2帧 19: 测试5帧 20: 测试10帧 21: 测试20帧 22: 测试50帧 23: 测试100帧 " ::= { rcftRemoteV35PortEntry 5 } rcftRemoteV35PortOrderModeParameter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 给远端模块V35口发送命令时所需要赋的模式参数。 " ::= { rcftRemoteV35PortEntry 6 } rcftRemoteV35PortOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 " ::= { rcftRemoteV35PortEntry 7 } rcftRemoteV35BertStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT3 BERT_STATUS 0: 正常工作； 1: 正在bert BIT2-1 BERT_RESULT 00:未测试 01:测试正常； 10:测试失败 BIT0 BERT_TYPE 0: 误码率方式； 1: 误码时间方式 " ::= {rcftRemoteV35PortEntry 8} rcftRemoteV35BertTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试时间，时间随测试的进行而增长,单位 S. " ::= {rcftRemoteV35PortEntry 9} rcftRemoteV35BertErrCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:误码数，单位是bit " ::= {rcftRemoteV35PortEntry 10} rcftRemoteV35BertUnusedTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试不可用时间，超过255秒后维持255秒不变，单位是S. " ::= {rcftRemoteV35PortEntry 11} rcftRemoteV35BertPortSpeed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:测试的端口速率，单位：kbps。 " ::= {rcftRemoteV35PortEntry 12} rcftRemoteV35BertCodeType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 误码率方式:测试码型，最大值为127 0000001'b：215-1 其它：保留。 " ::= {rcftRemoteV35PortEntry 13} rcftRemoteV35BertCodeNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 误码率方式:测试码型，最大值为127 0000001'b：2的31次方个码； 0000010'b：2的28次方个码； 0000011'b：2的25次方个码； 0000100'b：2的21次方个码； 1111111'b：测试不停； 其它：保留。 " ::= {rcftRemoteV35PortEntry 14} rcftRemoteV35LoopStatus OBJECT-TYPE SYNTAX INTEGER { localDoubleLoopEnable(1), localDoubleLoopDisable(2), remoteDoubleLoopEnable(3), remoteDoubleLoopDisable(4), normal(5), localInSideLoopEnale(6), localOutSideLoopEnable(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " V35的环回状态：1:本地环回，2：无本地环回，3：远端环回，4：无远端环回， 5:无环回， 6：本地内环使能，7：本地外环使能，8：本地双向环使能， 9:远端内环使能，10：远端外环使能，11：远端双向环使能， 12：本地内环禁止，13:本地外环禁止，14：本地双向环禁止， 15：远端内环禁止，16：远端外环禁止，17：远端双向环禁止， " ::= {rcftRemoteV35PortEntry 15} --------------------------V35端口的告警-------------------------- rcftRemoteV35PortDCDTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口的DCD告警 " ::= { rcftRemoteV35PortTraps 1 } rcftRemoteV35PortCTSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口的CTS告警 " ::= { rcftRemoteV35PortTraps 2 } rcftRemoteV35PortDTRTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口的DTR告警 " ::= { rcftRemoteV35PortTraps 3 } rcftRemoteV35PortRTSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口的RTS告警 " ::= { rcftRemoteV35PortTraps 4 } rcftRemoteV35PortCRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口占用的那一路E1的CRC告警 " ::= { rcftRemoteV35PortTraps 5 } rcftRemoteV35PortPATTTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口占用的那一路E1的误码测试告警 " ::= { rcftRemoteV35PortTraps 6 } rcftRemoteV35PortLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口占用的那一路E1的LOF告警 " ::= { rcftRemoteV35PortTraps 7 } rcftRemoteV35PortCVTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口占用的那一路E1的CV告警 " ::= { rcftRemoteV35PortTraps 8 } rcftRemoteV35PortAISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口占用的那一路E1的AIS告警 " ::= { rcftRemoteV35PortTraps 9 } rcftRemoteV35PortToLLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 站在本地设备上看对端V35口所占那一路E1的LOF告警 " ::= { rcftRemoteV35PortTraps 10 } rcftRemoteV35PortToLCVTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 站在本地设备上看对端V35口所占那一路E1的CV告警 " ::= { rcftRemoteV35PortTraps 11 } rcftRemoteV35PortToLAISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 站在本地设备上看对端V35口所占那一路E1的AIS告警 " ::= { rcftRemoteV35PortTraps 12 } rcftRemoteV35PortDSRTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteV35PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上V35端口的DSR告警 " ::= { rcftRemoteV35PortTraps 13 } --------------------------DS3E3端口的对象--------------------------------- rcftRemoteDS3E3PortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDS3E3PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The DS3E3 PORT table. " ::= { rcftRemoteDS3E3PortObjects 1 } rcftRemoteDS3E3PortEntry OBJECT-TYPE SYNTAX RcftRemoteDS3E3PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the DS3E3 PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteDS3E3PortIndex } ::= { rcftRemoteDS3E3PortTable 1 } RcftRemoteDS3E3PortEntry ::= SEQUENCE { rcftRemoteDS3E3PortIndex Integer32, rcftRemoteDS3E3PortAlarmStatus INTEGER, rcftRemoteDS3E3PortStatus INTEGER, rcftRemoteDS3E3PortESCont INTEGER, rcftRemoteDS3E3PortBertStatus INTEGER, rcftRemoteDS3E3PortFaultFass INTEGER, rcftRemoteDS3E3PortLoopStatus INTEGER, rcftRemoteDS3E3PortOrder INTEGER } rcftRemoteDS3E3PortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3口的索引 " ::= { rcftRemoteDS3E3PortEntry 1 } rcftRemoteDS3E3PortAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT8： OOF 从本地设备上看对端设备接收信号帧失步告警 1：正常 0：告警 BIT7： RAI 从本地设备上看对端设备RAI告警 1：正常 0：告警 BIT22： LOF 从本地设备上看对端设备电口LOF告警 1：正常 0：告警 BIT21 CRC 从本地设备上看对端设备电口CRC校验错告警 1：正常 0：告警 BIT20 RLCV 从本地设备上看对端设备电口编码冲突告警 1：正常 0：告警 BIT19 RDMO 从本地设备上看对端设备电口发送信号无输出 1：正常 0：告警 BIT18 RLOL 从本地设备上看对端设备电口接收信号失锁告警 1：正常 0：告警 BIT17 RLOS 从本地设备上看对端设备电口接收信号丢失告警 1：正常 0：告警 BIT16 RAIS 从本地设备上看对端设备电口接收信号AIS 告警 1：正常 0：告警 BIT8： OOF 接收信号帧失步告警 1：正常 0：告警 BIT7： RAI RAI告警 1：正常 0：告警 BIT6： LOF 接收信号帧丢失告警 1：正常 0：告警 BIT5 CRC CRC校验错告警 1：正常 0：告警 BIT4 LCV 编码冲突告警 1：正常 0：告警 BIT3 DMO 发送信号无输出 1：正常 0：告警 BIT2 LOL 接收信号失锁告警 1：正常 0：告警 BIT1 LOS 接收信号丢失告警 1：正常 0：告警 BIT0 AIS 接收信号AIS 告警 1：正常 0：告警 " ::= { rcftRemoteDS3E3PortEntry 2 } rcftRemoteDS3E3PortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT10: 线路编码 0:AMI 1:B3ZS --------------DS3 1:HDB3 --------------E3 BIT9-8：帧结构: 00:G.751 01:G.832 ------------E3 00:M23 01:C-bit ------------DS3 BIT7: 是否成帧 1: 成帧, 0:非成帧 BIT6: DS3/E3传输距离 1：长距， 0：短距 BIT5：保留 BIT4：保留 BIT3：保留 BIT2-1 端口的环回状态： 0：无环回，1：内环，2：外环，3：双向环 BIT0 端口模式选择 0：E3 1：DS3 " ::= { rcftRemoteDS3E3PortEntry 3 } rcftRemoteDS3E3PortESCont OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 误码秒个数 " ::= { rcftRemoteDS3E3PortEntry 4 } rcftRemoteDS3E3PortBertStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 1: 误码仪使能 2: 误码仪禁止 " ::= { rcftRemoteDS3E3PortEntry 5 } rcftRemoteDS3E3PortFaultFass OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1: 故障转移使能 2: 故障转移禁止 " ::= { rcftRemoteDS3E3PortEntry 6 } rcftRemoteDS3E3PortLoopStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 1: 本地环回， 2：无本地环回， 3：远端环回， 4：无远端环回， 5: 无环回， 6：本地内环使能， 7：本地外环使能， 8：本地双向环使能， 9：远端内环使能， 10：远端外环使能， 11：远端双向环使能， 12：本地内环禁止， 13: 本地外环禁止， 14：本地双向环禁止， 5： 远端内环禁止， 16：远端外环禁止， 17：远端双向环禁止， " ::= { rcftRemoteDS3E3PortEntry 7 } rcftRemoteDS3E3PortOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 " ::= { rcftRemoteDS3E3PortEntry 8 } --------------------------DS3E3端口的流量统计------------------------ rcftRemoteDS3E3StatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDS3E3StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 局端设备DS3E3端口的统计表. " ::= {rcftRemoteDS3E3PortPerformance 1} rcftRemoteDS3E3StatisticEntry OBJECT-TYPE SYNTAX RcftRemoteDS3E3StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteDS3E3Index为索引 " AUGMENTS { rcftRemoteDS3E3PortEntry } ::= {rcftRemoteDS3E3StatisticTable 1} RcftRemoteDS3E3StatisticEntry ::= SEQUENCE { rcftRemoteDS3E3TxPackets Counter32, rcftRemoteDS3E3TxBytes Counter32, rcftRemoteDS3E3TxFailurePackets Counter32, rcftRemoteDS3E3RxPackets Counter32, rcftRemoteDS3E3RxBytes Counter32, rcftRemoteDS3E3RxErrorPackets Counter32, rcftRemoteDS3E3FluxTimer Counter32 } rcftRemoteDS3E3TxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3口发送以太网包数 " ::= { rcftRemoteDS3E3StatisticEntry 1 } rcftRemoteDS3E3TxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3口发送以太网字节数 " ::= { rcftRemoteDS3E3StatisticEntry 2 } rcftRemoteDS3E3TxFailurePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3电口发送以太网丢包数 " ::= { rcftRemoteDS3E3StatisticEntry 3 } rcftRemoteDS3E3RxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3口接收以太网包数 " ::= { rcftRemoteDS3E3StatisticEntry 4 } rcftRemoteDS3E3RxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3口接收以太网字节数 " ::= { rcftRemoteDS3E3StatisticEntry 5 } rcftRemoteDS3E3RxErrorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS3E3电口接收以太网丢包数 " ::= { rcftRemoteDS3E3StatisticEntry 6 } rcftRemoteDS3E3FluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计的时间 " ::= { rcftRemoteDS3E3StatisticEntry 7 } --------------------------DS3E3端口的告警------------------------ rcftRemoteDS3E3PortAISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的接收信号AIS告警 " ::= { rcftRemoteDS3E3PortTraps 1 } rcftRemoteDS3E3PortLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的接收信号丢失告警 " ::= { rcftRemoteDS3E3PortTraps 2 } rcftRemoteDS3E3PortLOLTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的接收信号失锁告警 " ::= { rcftRemoteDS3E3PortTraps 3 } rcftRemoteDS3E3PortDMOTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的发送信号无输出告警 " ::= { rcftRemoteDS3E3PortTraps 4 } rcftRemoteDS3E3PortCVTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的编码冲突告警 " ::= { rcftRemoteDS3E3PortTraps 5 } rcftRemoteDS3E3PortCRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的CRC告警 " ::= { rcftRemoteDS3E3PortTraps 6 } rcftRemoteDS3E3PortToLAISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口接收信号AIS 告警 " ::= { rcftRemoteDS3E3PortTraps 7 } rcftRemoteDS3E3PortToLLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口接收信号LOS 告警 " ::= { rcftRemoteDS3E3PortTraps 8 } rcftRemoteDS3E3PortToLLOLTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口接收信号LOL 告警 " ::= { rcftRemoteDS3E3PortTraps 9 } rcftRemoteDS3E3PortToLDMOTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口发送信号无输出告警 " ::= { rcftRemoteDS3E3PortTraps 10 } rcftRemoteDS3E3PortToLCVTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口接收信号编码冲突告警 " ::= { rcftRemoteDS3E3PortTraps 11 } rcftRemoteDS3E3PortToLCRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口CRC告警 " ::= { rcftRemoteDS3E3PortTraps 12 } rcftRemoteDS3E3PortLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的LOF告警 " ::= { rcftRemoteDS3E3PortTraps 13 } rcftRemoteDS3E3PortToLLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口LOF告警 " ::= { rcftRemoteDS3E3PortTraps 14 } rcftRemoteDS3E3PortRAITrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的RAI告警 " ::= { rcftRemoteDS3E3PortTraps 15 } rcftRemoteDS3E3PortToLRAITrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口RAI告警 " ::= { rcftRemoteDS3E3PortTraps 16 } rcftRemoteDS3E3PortOOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS3E3端口的OOF告警 " ::= { rcftRemoteDS3E3PortTraps 17 } rcftRemoteDS3E3PortToLOOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS3E3PortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上看对端设备电口OOF告警 " ::= { rcftRemoteDS3E3PortTraps 18 } --------------------------pdh端口的对象--------------------------------- rcftRemotePdhPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemotePdhPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Pdh PORT table. " ::= { rcftRemotePdhPortObjects 1 } rcftRemotePdhPortEntry OBJECT-TYPE SYNTAX RcftRemotePdhPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Pdh PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemotePdhPortIndex } ::= { rcftRemotePdhPortTable 1 } RcftRemotePdhPortEntry ::= SEQUENCE { rcftRemotePdhPortIndex Integer32, rcftRemotePdhPortModuleType INTEGER, rcftRemotePdhPortAlarmStatus INTEGER, rcftRemotePdhPortStatus INTEGER, rcftRemotePdhPortECSCnt INTEGER, rcftRemotePdhPortSECSCnt INTEGER, rcftRemotePdhPortLoopStatus INTEGER, rcftRemotePdhPortOrder INTEGER, rcftRemotePdhPortBertStatus INTEGER, rcftRemotePdhPortBertErrCode Unsigned32 } rcftRemotePdhPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Pdh口的索引 " ::= { rcftRemotePdhPortEntry 1 } rcftRemotePdhPortModuleType OBJECT-TYPE SYNTAX INTEGER { optical-M(1), optical-S1(2), optical-S2(3), optical-S3(4), optical-SS13(5), optical-SS15(6), optical-SS23(7), optical-SS25(8), --optical-SS3(9), kuanglili 20090519 根据公司规范取消ss3光头类型 optical-SS34(9), optical-SS35(10), optical-S15(12), --kuanglili 20090909 S15光模块的枚举为12 optical-SFP(15), optical-SS24(23), optical-S1FC(50), optical-S1A(51), optical-S2A(52), optical-S3A(53), unknown-type(100) } MAX-ACCESS read-only STATUS current DESCRIPTION " 远端设备pdh光口的光模块类型 " ::= { rcftRemotePdhPortEntry 2 } rcftRemotePdhPortAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT20 从本地设备上查看到的对端设备掉电告警 0：告警； 1：正常 BIT19 从本地设备上查看到的对端设备光口的E-6 0：告警； 1：正常 BIT18 从本地设备上查看到的对端设备光口的E-3 0：告警； 1：正常 BIT17 从本地设备上查看到的对端设备光口的LOF 0：告警； 1：正常 BIT16 从本地设备上查看到的对端设备光口的LOS 0：告警； 1：正常 BIT3 E-6 pdh光口的E-6告警 0：告警； 1：正常 BIT2 E-3 pdh光口的E-3告警 0：告警； 1：正常 BIT1 LOF pdh光口LOF告警 0：告警 1：正常 BIT0 LOS pdh光口LOS告警 0：告警 1：正常 " ::= { rcftRemotePdhPortEntry 3 } rcftRemotePdhPortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT10 光口故障转移 0：禁止 1：使能 BIT9 光口所接的对端设备的掉电告警 0：告警； 1：正常 BIT8 光口ALS开关 0:禁止 1: 使能 BIT7-6 光口的环回状态 0：无环回，1：内环，2：外环 3：双向环 BIT5 光口ALS 0:禁止 1: 使能 BIT4 从本地设备上查看到的对端设备光口的工作状态 0:不工作 1：工作 BIT3 光口的工作状态 0:不工作 1：工作 BIT2-1 光口因故障转移功能使能时的开关状态： 0：开 1：因电-光Faultpass功能使能时关闭 2：因光口ALS功能使能关闭 BIT0 光口的打开关闭：1:open, 0:close " ::= { rcftRemotePdhPortEntry 4 } rcftRemotePdhPortECSCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " pdh光口误码秒 " ::= { rcftRemotePdhPortEntry 5 } rcftRemotePdhPortSECSCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " pdh光口严重误码秒 " ::= { rcftRemotePdhPortEntry 6 } rcftRemotePdhPortLoopStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 环回状态 1:本地环回，2：无本地环回，3：远端环回，4：无远端环回， 5:无环回， 6：本地内环使能，7：本地外环使能，8：本地双向环使能， 9:远端内环使能，10：远端外环使能，11：远端双向环使能， 12：本地内环禁止，13:本地外环禁止，14：本地双向环禁止， 15：远端内环禁止，16：远端外环禁止，17：远端双向环禁止， " ::= { rcftRemotePdhPortEntry 7 } rcftRemotePdhPortOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 " ::= { rcftRemotePdhPortEntry 8 } rcftRemotePdhPortBertStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 1: 误码仪使能 2: 误码仪禁止 " ::= { rcftRemotePdhPortEntry 9 } rcftRemotePdhPortBertErrCode OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " 误码率方式:误码数，单位是bit " ::= { rcftRemotePdhPortEntry 10} --------------------------Pdh端口的告警------------------------ rcftRemotePdhPortLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 局端设备上Pdh端口的接收信号丢失告警 " ::= { rcftRemotePdhPortTraps 1 } rcftRemotePdhPortLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 局端设备上Pdh端口的接收信号LOF告警 " ::= { rcftRemotePdhPortTraps 2 } rcftRemotePdhPortE3Trap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 局端设备上Pdh端口的E3告警 " ::= { rcftRemotePdhPortTraps 3 } rcftRemotePdhPortE6Trap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 局端设备上Pdh端口的E6告警 " ::= { rcftRemotePdhPortTraps 4 } rcftRemotePdhPortToLLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上查看到的对端设备光口的接收信号丢失告警 " ::= { rcftRemotePdhPortTraps 5 } rcftRemotePdhPortToLLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上查看到的对端设备光口的接收信号LOF告警 " ::= { rcftRemotePdhPortTraps 6 } rcftRemotePdhPortToLE3Trap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上查看到的对端设备光口的E3告警 " ::= { rcftRemotePdhPortTraps 7 } rcftRemotePdhPortToLE6rap NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上查看到的对端设备光口的E6告警 " ::= { rcftRemotePdhPortTraps 8 } rcftRemotePdhPortToRPowerDown NOTIFICATION-TYPE OBJECTS{ rcftRemotePdhPortAlarmStatus } STATUS current DESCRIPTION " 从本地设备上查看到的对端设备掉电告警 " ::= { rcftRemotePdhPortTraps 9 } --------------------------DS1端口的对象--------------------------------- rcftRemoteDS1PortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDS1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The DS1 PORT table. " ::= { rcftRemoteDS1PortObjects 1 } rcftRemoteDS1PortEntry OBJECT-TYPE SYNTAX RcftRemoteDS1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the DS1 PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteDS1PortIndex } ::= { rcftRemoteDS1PortTable 1 } RcftRemoteDS1PortEntry ::= SEQUENCE { rcftRemoteDS1PortIndex Integer32, rcftRemoteDS1PortAlarmStatus INTEGER, rcftRemoteDS1PortStatus INTEGER, rcftRemoteDS1PortESCont INTEGER, rcftRemoteDS1PortSESCont INTEGER, rcftRemoteDS1PortBertStatus INTEGER, rcftRemoteDS1PortFaultPass INTEGER, rcftRemoteDS1PortLoopStatus INTEGER, rcftRemoteDS1PortOrder INTEGER, rcftRemoteDS1PortTranLength INTEGER, rcftRemoteDS1PortFaultPassIndicator INTEGER, rcftRemoteDS1PortframeType INTEGER, rcftRemoteDS1PortChannel INTEGER } rcftRemoteDS1PortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1口的索引 " ::= { rcftRemoteDS1PortEntry 1 } rcftRemoteDS1PortAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT22：从本地设备上看对端DS1电口的LOF BIT21：从本地设备上看对端DS1电口的CRC BIT17：从本地设备上看对端DS1电口的LOS BIT16：从本地设备上看对端DS1电口的AIS BIT8 RED 1:正常 0：告警 BIT7 YEL 1:正常 0：告警 BIT6：LOF 接收信号帧失步告警 BIT5：CRC CRC校验错告警 BIT4 LCV 编码冲突告警 1：正常 0：告警 BIT3 DMO 发送信号无输出 1：正常 0：告警 BIT1：LOS 接收信号丢失告警 BIT0：AIS 接收信号AIS 告警 " ::= { rcftRemoteDS1PortEntry 2 } rcftRemoteDS1PortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT0：线路编码类型 1:B8ZS 0:AMI BIT1: DS1是否成帧 1:成帧 0:非成帧 BIT2: DS1是否打开 1：打开 0：关闭 " ::= { rcftRemoteDS1PortEntry 3 } rcftRemoteDS1PortESCont OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 误码秒个数 " ::= { rcftRemoteDS1PortEntry 4 } rcftRemoteDS1PortSESCont OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 严重误码秒个数 " ::= { rcftRemoteDS1PortEntry 5 } rcftRemoteDS1PortBertStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 1: 误码仪使能 2: 误码仪禁止 " ::= { rcftRemoteDS1PortEntry 6 } rcftRemoteDS1PortFaultPass OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1: 故障转移使能 2: 故障转移禁止 " ::= { rcftRemoteDS1PortEntry 7 } rcftRemoteDS1PortLoopStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 1: 本地环回， 2：无本地环回， 3：远端环回， 4：无远端环回， 5: 无环回， 6：本地内环使能， 7：本地外环使能， 8：本地双向环使能， 9：远端内环使能， 10：远端外环使能， 11：远端双向环使能， 12：本地内环禁止， 13: 本地外环禁止， 14：本地双向环禁止， 5： 远端内环禁止， 16：远端外环禁止， 17：远端双向环禁止， " ::= { rcftRemoteDS1PortEntry 8 } rcftRemoteDS1PortOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 1：硬复位 2：软复位 3：开始查询统计信息 4：结束查询统计信息 5：内环使能 6：内环禁止 7：外环使能 8：外环禁止 9: 无环回 10: 本地内环使能 11: 本地外环使能 12: 本地双向环使能 13: 远端内环使能 14: 远端外环使能 15: 远端双向环使能 16: 本地内环禁止 17: 本地外环禁止 18: 本地双向环禁止 19: 远端内环禁止 20: 远端外环禁止 21: 远端双向环禁止 22: 端口BERT测试开始 23: 端口BERT测试结束 " ::= { rcftRemoteDS1PortEntry 9 } rcftRemoteDS1PortTranLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " DS1传输距离配置 " ::= { rcftRemoteDS1PortEntry 10 } rcftRemoteDS1PortFaultPassIndicator OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 故障转移指示灯 １：灭，故障转移禁止 ２：绿常亮，故障转移使能，但没有故障发生 ３：黄闪亮，故障转移使能，且发生故障导致以太口关闭 " ::= { rcftRemoteDS1PortEntry 11 } rcftRemoteDS1PortframeType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 帧格式 1：SF帧格式 2：ESF 3：DM 4：SLC-96 " ::= { rcftRemoteDS1PortEntry 12 } rcftRemoteDS1PortChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 成帧时所用的时隙，bit0-bit30每位分别表示时隙１到31的占用情况。 " ::= { rcftRemoteDS1PortEntry 13 } --------------------------DS1端口的流量统计------------------------ rcftRemoteDS1StatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDS1StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 局端设备DS1端口的统计表. " ::= {rcftRemoteDS1PortPerformance 1} rcftRemoteDS1StatisticEntry OBJECT-TYPE SYNTAX RcftRemoteDS1StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteDS1Index为索引 " AUGMENTS { rcftRemoteDS1PortEntry } ::= {rcftRemoteDS1StatisticTable 1} RcftRemoteDS1StatisticEntry ::= SEQUENCE { rcftRemoteDS1TxPackets Counter32, rcftRemoteDS1TxBytes Counter32, rcftRemoteDS1TxFailurePackets Counter32, rcftRemoteDS1RxPackets Counter32, rcftRemoteDS1RxBytes Counter32, rcftRemoteDS1RxErrorPackets Counter32, rcftRemoteDS1FluxTimer Counter32 } rcftRemoteDS1TxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1口发送以太网包数 " ::= { rcftRemoteDS1StatisticEntry 1 } rcftRemoteDS1TxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1口发送以太网字节数 " ::= { rcftRemoteDS1StatisticEntry 2 } rcftRemoteDS1TxFailurePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1电口发送以太网丢包数 " ::= { rcftRemoteDS1StatisticEntry 3 } rcftRemoteDS1RxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1口接收以太网包数 " ::= { rcftRemoteDS1StatisticEntry 4 } rcftRemoteDS1RxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1口接收以太网字节数 " ::= { rcftRemoteDS1StatisticEntry 5 } rcftRemoteDS1RxErrorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " DS1电口接收以太网丢包数 " ::= { rcftRemoteDS1StatisticEntry 6 } rcftRemoteDS1FluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计的时间 " ::= { rcftRemoteDS1StatisticEntry 7 } --------------------------DS1端口的告警------------------------ rcftRemoteDS1PortAISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收信号AIS告警 " ::= { rcftRemoteDS1PortTraps 1 } rcftRemoteDS1PortLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收信号丢失告警 " ::= { rcftRemoteDS1PortTraps 2 } rcftRemoteDS1PortToLAISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收对端信号AIS告警 " ::= { rcftRemoteDS1PortTraps 3 } rcftRemoteDS1PortToLLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收对端信号丢失告警 " ::= { rcftRemoteDS1PortTraps 4 } rcftRemoteDS1PortLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收信号LOF告警 " ::= { rcftRemoteDS1PortTraps 5 } rcftRemoteDS1PortCRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收信号CRC告警 " ::= { rcftRemoteDS1PortTraps 6 } rcftRemoteDS1PortToLLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收对端信号LOF告警 " ::= { rcftRemoteDS1PortTraps 7 } rcftRemoteDS1PortToLCRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收对端信号CRC告警 " ::= { rcftRemoteDS1PortTraps 8 } rcftRemoteDS1PortFaultPassIndicatorTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortFaultPassIndicator } STATUS current DESCRIPTION " １：灭，故障转移禁止 ２：绿常亮，故障转移使能，但没有故障发生 ３：黄闪亮，故障转移使能，且发生故障导致以太口关闭 " ::= { rcftRemoteDS1PortTraps 9 } rcftRemoteDS1PortDMOTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的接收信号DMO告警 " ::= { rcftRemoteDS1PortTraps 10 } rcftRemoteDS1PortCVTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的CV告警 " ::= { rcftRemoteDS1PortTraps 11 } rcftRemoteDS1PortYELTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的YEL告警 " ::= { rcftRemoteDS1PortTraps 12 } rcftRemoteDS1PortREDTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteDS1PortAlarmStatus } STATUS current DESCRIPTION " 本端设备上DS1端口的RED告警 " ::= { rcftRemoteDS1PortTraps 13 } --------------------------子卡的对象--------------------------------- rcftRemoteMoudleTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The EthFe PORT of Moudle table. " ::= { rcftRemoteMoudleObjects 1 } rcftRemoteMoudleEntry OBJECT-TYPE SYNTAX RcftRemoteMoudleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the EthFe PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemoteMoudleIndex } ::= { rcftRemoteMoudleTable 1 } RcftRemoteMoudleEntry ::= SEQUENCE { rcftRemoteMoudleIndex Integer32, rcftRemoteMoudleExist INTEGER, rcftRemoteMoudleType INTEGER, rcftRemoteMoudleStatus INTEGER, rcftRemoteMoudleSigleChipDescr OCTET STRING, rcftRemoteMoudleHardWareDescr OCTET STRING, rcftRemoteMoudleFPGADescr OCTET STRING, rcftRemoteMoudleOrder INTEGER, rcftRemoteMoudleIFOrder OCTET STRING } rcftRemoteMoudleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " EthFe口的索引 " ::= { rcftRemoteMoudleEntry 1 } rcftRemoteMoudleExist OBJECT-TYPE SYNTAX INTEGER { exist(1), notExist(2) } MAX-ACCESS read-only STATUS current DESCRIPTION " 槽位板卡存在状态(1:存在,2:不存在). " ::= {rcftRemoteMoudleEntry 2} rcftRemoteMoudleType OBJECT-TYPE SYNTAX INTEGER { e-SUBM-2E1-A(6402), e-SUBM-2FV35-A(6422), e-SUBM-2FE-A(6423), e-SUBM-FE4E1-A(6424), e-SUBM-FV35-A(6425), e-SUBM-FV35-B(6427), e-SUBM-2FV35-B(6428) } MAX-ACCESS read-write STATUS current DESCRIPTION " 模块类型号 6402: E-SUBM-2E1-A 6422: E-SUBM-2FV35-A 6423: E-SUBM-2FE-A 6424: E-SUBM-FE4E1-A 6425: E-SUBM-FV35-A 6427: E-SUBM-FV35-B 6428: E-SUBM-2FV35-B 注意：为了网管实现的方便，子卡的设备类型号0x1901~0x19FE 因此子卡的设备类型号，将在 6401~6654 之间。 " ::= { rcftRemoteMoudleEntry 3 } rcftRemoteMoudleStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT0 误码率超过10-3时，是否切断E1 0：不切断 1：切断 " ::= { rcftRemoteMoudleEntry 4 } rcftRemoteMoudleSigleChipDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " A textual description of the siglechip program version. " ::= { rcftRemoteMoudleEntry 5 } rcftRemoteMoudleHardWareDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " A textual description of the siglechip program version. " ::= { rcftRemoteMoudleEntry 6 } rcftRemoteMoudleFPGADescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " A textual description of the FPGA program version. " ::= { rcftRemoteMoudleEntry 7 } rcftRemoteMoudleOrder OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 子卡的命令,属于子卡中模块级的命令. 1: 复位设备 2: 复位以太网芯片 3: 流量统计查询开始 4: 流量统计查询结束 " ::={ rcftRemoteMoudleEntry 8} rcftRemoteMoudleIFOrder OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " 子卡的命令,属于子卡中接口级的命令. 此命令节点采用字节块的方式下发,每一个字节表示一个端口. 其中,每一个字节的数值表示如下: 0: 无环回 1: 误码仪功能使能 2: 误码仪功能禁止 3: 本地E1外环使能 4: 本地E1内环使能 5: 本地V35内环使能 6: 远端V35内环使能 7: 本地E1外环禁止 " ::={ rcftRemoteMoudleEntry 9} rcftRemoteMoudleExistTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleExist } STATUS current DESCRIPTION " 模块在位告警告警 " ::= { rcftRemoteMoudleTraps 1 } --------------------------以太网电口的对象----------------------------- rcftRemoteMoudleEthFeTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudleEthFeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The EthFe PORT of Moudle table. " ::= { rcftRemoteMoudleEthFeObjects 1 } rcftRemoteMoudleEthFeEntry OBJECT-TYPE SYNTAX RcftRemoteMoudleEthFeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the EthFe PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemoteMoudleIndex, rcftRemoteMoudleEthFeIndex } ::= { rcftRemoteMoudleEthFeTable 1 } RcftRemoteMoudleEthFeEntry ::= SEQUENCE { rcftRemoteMoudleEthFeIndex Integer32, rcftRemoteMoudleEthFeStatus INTEGER, rcftRemoteMoudleEthFeRxRestrictSpeed INTEGER, rcftRemoteMoudleEthFeTxRestrictSpeed INTEGER, rcftRemoteMoudleEthFeRestrictSpeedStep INTEGER, rcftRemoteMoudleEthFeAlarmStatus INTEGER } rcftRemoteMoudleEthFeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " EthFe口的索引 " ::= { rcftRemoteMoudleEthFeEntry 1 } rcftRemoteMoudleEthFeStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT6 以太网电口的流量控制 0：禁止； 1：使能 BIT5 以太网电口的时钟方式 0：从时钟； 1：主时钟 BIT4 以太网电口的自适应 0：自适应关闭； 1：自适应打开 BIT3 以太网电口的使能 0：关闭； 1：打开 BIT2 以太网电口的link状态 0：link down； 1：link up BIT1 以太网电口的速率 0：10M 1：100M BIT0 以太网电口的双工 0：半双工 1：全双工 " ::= { rcftRemoteMoudleEthFeEntry 2 } rcftRemoteMoudleEthFeRxRestrictSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 接收带宽 " ::= { rcftRemoteMoudleEthFeEntry 3 } rcftRemoteMoudleEthFeTxRestrictSpeed OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 发送带宽 " ::= { rcftRemoteMoudleEthFeEntry 4 } rcftRemoteMoudleEthFeRestrictSpeedStep OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 带宽粒度 0x00：64Kbps；0x01：32Kbps（无）；其余：保留。 " ::= { rcftRemoteMoudleEthFeEntry 5 } rcftRemoteMoudleEthFeAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " BIT0 本地以太网CRC错误告警 0：告警； 1：正常 " ::= { rcftRemoteMoudleEthFeEntry 6 } --------------------------以太网电口的流量统计-------------------------- rcftRemoteMoudleEthFeStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudleEthFeStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 局端设备Eth端口的统计表. " ::= {rcftRemoteMoudleEthFePerformance 1} rcftRemoteMoudleEthFeStatisticEntry OBJECT-TYPE SYNTAX RcftRemoteMoudleEthFeStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteMoudleEthFeIndex为索引 " AUGMENTS { rcftRemoteMoudleEthFeEntry } ::= {rcftRemoteMoudleEthFeStatisticTable 1} RcftRemoteMoudleEthFeStatisticEntry ::= SEQUENCE { rcftRemoteMoudleEthFeTxPackets Counter32, rcftRemoteMoudleEthFeTxBytes Counter32, rcftRemoteMoudleEthFeTxFailurePackets Counter32, rcftRemoteMoudleEthFeRxPackets Counter32, rcftRemoteMoudleEthFeRxBytes Counter32, rcftRemoteMoudleEthFeRxErrorPackets Counter32, rcftRemoteMoudleEthFeFluxTimer Counter32 } rcftRemoteMoudleEthFeTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网包数 " ::= { rcftRemoteMoudleEthFeStatisticEntry 1 } rcftRemoteMoudleEthFeTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口发送以太网字节数 " ::= { rcftRemoteMoudleEthFeStatisticEntry 2 } rcftRemoteMoudleEthFeTxFailurePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网电口发送以太网丢包数 " ::= { rcftRemoteMoudleEthFeStatisticEntry 3 } rcftRemoteMoudleEthFeRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网包数 " ::= { rcftRemoteMoudleEthFeStatisticEntry 4 } rcftRemoteMoudleEthFeRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网口接收以太网字节数 " ::= { rcftRemoteMoudleEthFeStatisticEntry 5 } rcftRemoteMoudleEthFeRxErrorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网电口接收以太网丢包数 " ::= { rcftRemoteMoudleEthFeStatisticEntry 6 } rcftRemoteMoudleEthFeFluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计的时间 " ::= { rcftRemoteMoudleEthFeStatisticEntry 7 } --------------------------以太网电口的告警-------------------------- rcftRemoteMoudleEthFeLinkTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleEthFeStatus } STATUS current DESCRIPTION " 局端设备上以太网电口的LINK告警 " ::= { rcftRemoteMoudleEthFeTraps 1 } --------------------------PDH端口的对象--------------------------------- rcftRemoteMoudlePdhTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudlePdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Pdh PORT table. " ::= { rcftRemoteMoudlePdhObjects 1 } rcftRemoteMoudlePdhEntry OBJECT-TYPE SYNTAX RcftRemoteMoudlePdhEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Pdh PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemoteMoudleIndex, rcftRemoteMoudlePdhIndex } ::= { rcftRemoteMoudlePdhTable 1 } RcftRemoteMoudlePdhEntry ::= SEQUENCE { rcftRemoteMoudlePdhIndex Integer32, rcftRemoteMoudlePdhAlarmStatus INTEGER, rcftRemoteMoudlePdhStatus INTEGER } rcftRemoteMoudlePdhIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Pdh口的索引 " ::= { rcftRemoteMoudlePdhEntry 1 } rcftRemoteMoudlePdhAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " Pdh口的告警状态 其他位：保留 BIT20 从本地设备上查看到的对端设备掉电告警 0：告警； 1：正常 BIT19 从本地设备上查看到的对端设备光口的E-6 0：告警； 1：正常 BIT18 从本地设备上查看到的对端设备光口的E-3 0：告警； 1：正常 BIT17 从本地设备上查看到的对端设备光口的LOF 0：告警； 1：正常 BIT16 从本地设备上查看到的对端设备光口的LOS 0：告警； 1：正常 BIT3 E-6 pdh光口的E-6告警 0：告警； 1：正常 BIT2 E-3 pdh光口的E-3告警 0：告警； 1：正常 BIT1 LOF pdh光口LOF告警 0：告警 1：正常 BIT0 LOS pdh光口LOS告警 0：告警 1：正常 " ::= { rcftRemoteMoudlePdhEntry 2 } rcftRemoteMoudlePdhStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { rcftRemoteMoudlePdhEntry 3 } --------------------------PDH端口的告警--------------------------------- rcftRemoteMoudlePdhLOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudlePdhAlarmStatus } STATUS current DESCRIPTION " 局端设备上Pdh光口的LOS告警 " ::= { rcftRemoteMoudlePdhTraps 1 } rcftRemoteMoudlePdhLOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudlePdhAlarmStatus } STATUS current DESCRIPTION " 局端设备上Pdh光口的LOF告警 " ::= { rcftRemoteMoudlePdhTraps 2 } --------------------------E1端口的对象--------------------------------- rcftRemoteMoudleE1Table OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudleE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The E1 PORT table. " ::= { rcftRemoteMoudleE1Objects 1 } rcftRemoteMoudleE1Entry OBJECT-TYPE SYNTAX RcftRemoteMoudleE1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the E1 PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemoteMoudleIndex, rcftRemoteMoudleE1Index } ::= { rcftRemoteMoudleE1Table 1 } RcftRemoteMoudleE1Entry ::= SEQUENCE { rcftRemoteMoudleE1Index Integer32, rcftRemoteMoudleE1AlarmStatus INTEGER, rcftRemoteMoudleE1Status INTEGER, rcftRemoteMoudleE1TimeSlots INTEGER, rcftRemoteMoudleE1TS0Mode INTEGER, rcftRemoteMoudleE1LoopStatus INTEGER, rcftRemoteMoudleE1ESCnt INTEGER, rcftRemoteMoudleE1SESCnt INTEGER } rcftRemoteMoudleE1Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1口的索引 " ::= { rcftRemoteMoudleE1Entry 1 } rcftRemoteMoudleE1AlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " E1口的告警状态 其他位：保留 BIT21 从本地设备上看到的对端设备E1的CRC告警：0：告警； 1：正常。 BIT20 从本地设备上看到的对端设备E1的LOMF告警：0：告警； 1：正常。 BIT19 从本地设备上看到的对端设备E1的LOF告警：0：告警； 1：正常。 BIT18 从本地设备上看到的对端设备E1的CV告警：0：告警； 1：正常。 BIT17 从本地设备上看到的对端设备E1的AIS告警：0：告警； 1：正常。 BIT16 从本地设备上看到的对端设备E1的LOS告警：0：告警； 1：正常。 BIT5 CRC 0: 本地E1 CRC告警； 1：本地E1 CRC正常； BIT4 LOMF 0：本地E1 复帧失步； 1：本地E1 复帧正常。 BIT3 LOF 0：本地E1 帧失步； 1：本地E1 帧正常。 BIT2 CV 0：本地HDB3 编码违例；1：本地HDB3 编码正常。 BIT1 AIS 0：本地AIS 告警； 1：无本地AIS 告警。 BIT0 LOS 0：本地信号消失告警； 1：本地信号正常。 " ::= { rcftRemoteMoudleE1Entry 2 } rcftRemoteMoudleE1Status OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " E1口的状态 其他位：保留 BIT14 本地E1口内环 0：禁止； 1：使能 BIT13 E1是否被网管禁止 0：正常； 1：禁止 BIT12 E1关断是否由延时引起 0：其他原因； 1：因为延时引起； BIT11 E1口是否使用 0：不使用； 1：使用； BIT10 E1口建链是否成功 0：不成功； 1：成功； BIT9 对端的E1祯中是否包含CRC 0：无CRC； 1：有CRC； BIT8 故障转移功能 0：禁止； 1：使能； BIT7 是否使用SA bit 0：不使用； 1：使用； BIT6 CRC自协商结果 0：禁止； 1：使能； BIT5 误码测试功能 0：禁止； 1：使能； BIT4 误码测试结果 0：有误码； 1：正常； BIT3-2 时钟方式 00：从时钟； 01：保留； 10：V35终端时钟 11：主时钟 BIT1 时隙带宽控制 0：从控； 1：主控； BIT0 OPEN 0：本地E1端口关闭； 1：本地E1端口打开； " ::= { rcftRemoteMoudleE1Entry 3 } rcftRemoteMoudleE1TimeSlots OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " E1口在成帧模式下所占用的时隙,bit0-bit30每位分别表示时隙1到时隙31的占用情况。 时隙0的占用与否是通过透明成帧模式判断的。 " ::= { rcftRemoteMoudleE1Entry 4 } rcftRemoteMoudleE1TS0Mode OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 工作模式（TS0）： 1：透明； 2：成帧 " ::= { rcftRemoteMoudleE1Entry 5 } rcftRemoteMoudleE1LoopStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " E1的环回状态：1:本地环回，2：无本地环回，3：远端环回，4：无远端环回， 5:无环回， 6：本地内环使能，7：本地外环使能，8：本地双向环使能， 9:远端内环使能，10：远端外环使能，11：远端双向环使能， 12：本地内环禁止，13:本地外环禁止，14：本地双向环禁止， 15：远端内环禁止，16：远端外环禁止，17：远端双向环禁止， " ::= { rcftRemoteMoudleE1Entry 6 } rcftRemoteMoudleE1ESCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 局端设备E1误码秒统计计数 " ::= {rcftRemoteMoudleE1Entry 7} rcftRemoteMoudleE1SESCnt OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 局端设备E1严重误码秒统计计数 " ::= {rcftRemoteMoudleE1Entry 8} --------------------------E1端口的流量统计--------------------------------- rcftRemoteMoudleE1StatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudleE1StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 局端设备E1端口的统计表. " ::= {rcftRemoteMoudleE1Performance 1} rcftRemoteMoudleE1StatisticEntry OBJECT-TYPE SYNTAX RcftRemoteMoudleE1StatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteMoudleE1Index为索引 " AUGMENTS { rcftRemoteMoudleE1Entry } ::= {rcftRemoteMoudleE1StatisticTable 1} RcftRemoteMoudleE1StatisticEntry ::= SEQUENCE { rcftRemoteMoudleE1TxPackets Counter32, rcftRemoteMoudleE1TxBytes Counter32, rcftRemoteMoudleE1TxFailurePackets Counter32, rcftRemoteMoudleE1RxPackets Counter32, rcftRemoteMoudleE1RxBytes Counter32, rcftRemoteMoudleE1RxErrorPackets Counter32, rcftRemoteMoudleE1FluxTimer Counter32 } rcftRemoteMoudleE1TxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1口发送以太网包数 " ::= { rcftRemoteMoudleE1StatisticEntry 1 } rcftRemoteMoudleE1TxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1口发送以太网字节数 " ::= { rcftRemoteMoudleE1StatisticEntry 2 } rcftRemoteMoudleE1TxFailurePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1口发送以太网丢包数 " ::= { rcftRemoteMoudleE1StatisticEntry 3 } rcftRemoteMoudleE1RxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1口接收以太网包数 " ::= { rcftRemoteMoudleE1StatisticEntry 4 } rcftRemoteMoudleE1RxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1接收以太网字节数 " ::= { rcftRemoteMoudleE1StatisticEntry 5 } rcftRemoteMoudleE1RxErrorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " E1口接收以太网丢包数 " ::= { rcftRemoteMoudleE1StatisticEntry 6 } rcftRemoteMoudleE1FluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计的时间 " ::= { rcftRemoteMoudleE1StatisticEntry 7 } --------------------------E1端口的告警-------------------------- rcftRemoteMoudleE1LOSTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleE1AlarmStatus } STATUS current DESCRIPTION " 局端设备上E1接口的LOS告警 " ::= { rcftRemoteMoudleE1Traps 1 } rcftRemoteMoudleE1AISTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleE1AlarmStatus } STATUS current DESCRIPTION " 局端设备上E1接口的AIS告警 " ::= { rcftRemoteMoudleE1Traps 2 } rcftRemoteMoudleE1CRCTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleE1AlarmStatus } STATUS current DESCRIPTION " 局端设备上E1接口的CRC告警 " ::= { rcftRemoteMoudleE1Traps 3 } rcftRemoteMoudleE1CVTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleE1AlarmStatus } STATUS current DESCRIPTION " 局端设备上E1接口的CV告警 " ::= { rcftRemoteMoudleE1Traps 4 } rcftRemoteMoudleE1LOFTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleE1AlarmStatus } STATUS current DESCRIPTION " 局端设备上E1接口的LOF告警 " ::= { rcftRemoteMoudleE1Traps 5 } rcftRemoteMoudleE1ErrorCodeTrap NOTIFICATION-TYPE OBJECTS{ rcftRemoteMoudleE1Status } STATUS current DESCRIPTION " 局端设备上E1接口的误码测试告警 " ::= { rcftRemoteMoudleE1Traps 6 } --------------------------V35端口的对象--------------------------------- rcftRemoteMoudleV35Table OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteMoudleV35Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The V35 PORT table. " ::= { rcftRemoteMoudleV35Objects 1 } rcftRemoteMoudleV35Entry OBJECT-TYPE SYNTAX RcftRemoteMoudleV35Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the V35 PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemoteMoudleIndex, rcftRemoteMoudleV35Index } ::= { rcftRemoteMoudleV35Table 1 } RcftRemoteMoudleV35Entry ::= SEQUENCE { rcftRemoteMoudleV35Index Integer32, rcftRemoteMoudleV35AlarmStatus INTEGER, rcftRemoteMoudleV35Status INTEGER } rcftRemoteMoudleV35Index OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " V35口的索引 " ::= { rcftRemoteMoudleV35Entry 1 } rcftRemoteMoudleV35AlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 其它位 保留 固定000'b。 BIT11 RAIS 站在本地设备上看对端V35口所占那一路E1的AIS告警 1：正常 0：告警 BIT10 RCV 站在本地设备上看对端V35口所占那一路E1的CV告警 1：正常 0：告警 BIT9 RLOF 站在本地设备上看对端V35口所占那一路E1的LOF告警 1：正常 0：告警 BIT8 AIS V35口所占那一路E1的AIS告警 1：正常 0：告警 BIT7 CV V35口所占那一路E1的CV告警 1：正常 0：告警 BIT6 LOF V35口所占那一路E1的LOF告警 1：正常 0：告警 BIT5 PATT 1：误码测试正常 0：误码测试告警 BIT4 CRC_ALARM 1：正常 0：告警 BIT3 DCD_O 1：DCD信号UP； 0：DCD信号DOWN。 BIT2 CTS_O 1：CTS信号UP； 0：CTS信号DOWN。 BIT1 DTR_I 1：DTR信号UP； 0：DTR信号DOWN。 BIT0 RTS_I 1：RTS信号UP； 0：RTS信号DOWN。 " ::= { rcftRemoteMoudleV35Entry 2 } rcftRemoteMoudleV35Status OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT15 DSR_O 0：DSR信号up 1：DSR信号down BIT14 DTR_I 0：DTR信号up 1：DTR信号down BIT13 RTS_I 0：RTS信号up 1：RTS信号down BIT12 故障转移功能（E1到V35） 0:禁止 1：使能 BIT11 CTS_O 0：CTS信号up 1：CTS信号down BIT10 DCD_O 0：DCD信号up 1：DCD信号down BIT9 RD状态 0：禁止 1：使能 BIT8 TD状态 0：禁止 1：使能 BIT7~6 时钟方式 11：主时钟 00：从时钟 01：V35终端时钟 10：V35终端时钟且带宽跟随 BIT5 时隙带宽控制 0：从控； 1：主控 BIT4 ALOOP功能 0：禁止； 1：使能 BIT3 DLOOP功能 0：禁止； 1：使能 BIT2 RLOOP功能 0：禁止； 1：使能 BIT1 远端环回状态 0：未成功； 1：成功 BIT0 RX_CLK 0：正相； 1：反相 " ::= { rcftRemoteMoudleV35Entry 3 } --------------------------V35端口的告警-------------------------- rcftRemoteAudioPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteAudioPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Audio PORT table. " ::= { rcftRemoteAudioPortObjects 1 } rcftRemoteAudioPortEntry OBJECT-TYPE SYNTAX RcftRemoteAudioPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Audio PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteAudioPortIndex } ::= { rcftRemoteAudioPortTable 1 } RcftRemoteAudioPortEntry ::= SEQUENCE { rcftRemoteAudioPortIndex Integer32, rcftRemoteAudioPortStatus INTEGER, rcftRemoteAudioPortPosition INTEGER, rcftRemoteAudioPortType INTEGER } rcftRemoteAudioPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Audio口的索引 " ::= { rcftRemoteAudioPortEntry 1 } rcftRemoteAudioPortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT1 LOS 音频口有无信号告警 1：正常 0：告警 BIT0 音频口的开关状态 0：关闭 1：打开 " ::= { rcftRemoteAudioPortEntry 2 } rcftRemoteAudioPortPosition OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 音频口的位置信息： bit7-4：盘 bit3-0：槽 " ::={ rcftRemoteAudioPortEntry 3} rcftRemoteAudioPortType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 音频口的类型： 1：电话用户端 2：电话中继端 3：高保真双向音频 4：高保真音频编码 5：高保真音频解码 " ::= { rcftRemoteAudioPortEntry 4 } rcftRemoteVideoPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteVideoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Video PORT table. " ::= { rcftRemoteVideoPortObjects 1 } rcftRemoteVideoPortEntry OBJECT-TYPE SYNTAX RcftRemoteVideoPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Video PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteVideoPortIndex } ::= { rcftRemoteVideoPortTable 1 } RcftRemoteVideoPortEntry ::= SEQUENCE { rcftRemoteVideoPortIndex Integer32, rcftRemoteVideoPortStatus INTEGER, rcftRemoteVideoPortPosition INTEGER, rcftRemoteVideoPortSourceID INTEGER } rcftRemoteVideoPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Video口的索引 " ::= { rcftRemoteVideoPortEntry 1 } rcftRemoteVideoPortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT7 视频口输入信号状态 0：无信号； 1：有信号 BIT6 视频口输出信号状态 0：无信号； 1：有信号 BIT5 视频口输入信号开关 0：关闭； 1：打开 BIT4 视频口输出信号开关 0：关闭； 1：打开 BIT3 视频口方向 0：单向； 1：双向 BIT2 视频口的开关状态 0：关闭 1：打开 BIT1 视频口的属性 0：输入， 1：输出 BIT0 LOS 视频口有无信号告警 0：正常 1：告警 " ::= { rcftRemoteVideoPortEntry 2 } rcftRemoteVideoPortPosition OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 视频口的位置信息： bit7-4：盘 bit3-0：槽 " ::={ rcftRemoteVideoPortEntry 3} rcftRemoteVideoPortSourceID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 视频源ID " ::= { rcftRemoteVideoPortEntry 4 } --------------------------Video 视频口的告警------------------------ rcftRemoteVideoPortSignalLos NOTIFICATION-TYPE OBJECTS{ rcftRemoteVideoPortStatus } STATUS current DESCRIPTION " 局端设备上Video 视频口有无信号告警 " ::= { rcftRemoteVideoPortTraps 1 } rcftRemoteVideoPortSignalInLos NOTIFICATION-TYPE OBJECTS{ rcftRemoteVideoPortStatus } STATUS current DESCRIPTION " 局端设备上Video 视频口输入有无信号告警 " ::= { rcftRemoteVideoPortTraps 2 } rcftRemoteVideoPortSignalOutLos NOTIFICATION-TYPE OBJECTS{ rcftRemoteVideoPortStatus } STATUS current DESCRIPTION " 局端设备上Video 视频口输出有无信号告警 " ::= { rcftRemoteVideoPortTraps 3 } ---------------------------DataPort----------------------------- rcftRemoteDataPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteDataPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Data PORT table. " ::= { rcftRemoteDataPortObjects 1 } rcftRemoteDataPortEntry OBJECT-TYPE SYNTAX RcftRemoteDataPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the Data PORT table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteDataPortIndex } ::= { rcftRemoteDataPortTable 1 } RcftRemoteDataPortEntry ::= SEQUENCE { rcftRemoteDataPortIndex Integer32, rcftRemoteDataPortStatus INTEGER, rcftRemoteDataPortPosition INTEGER, rcftRemoteDataPortType INTEGER } rcftRemoteDataPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " Data 口的索引 " ::= { rcftRemoteDataPortEntry 1 } rcftRemoteDataPortStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " BIT1 数据口有无信号 1：正常 0：告警 BIT0 数据口的开关状态 0：关闭 1：打开 " ::= { rcftRemoteDataPortEntry 2 } rcftRemoteDataPortPosition OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 数据口的位置信息： bit7-4：盘 bit3-0：槽 " ::={ rcftRemoteDataPortEntry 3} rcftRemoteDataPortType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 数据口类型： 1：232 2：422 3：485 4：开关量 " ::= { rcftRemoteDataPortEntry 4 } rcftRemoteSimpleModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteSimpleModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The Data PORT table. " ::= { rcftRemoteSimpleModuleObjects 1 } rcftRemoteSimpleModuleEntry OBJECT-TYPE SYNTAX RcftRemoteSimpleModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the SimpleModule table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteSimpleModuleIndex } ::= { rcftRemoteSimpleModuleTable 1 } RcftRemoteSimpleModuleEntry ::= SEQUENCE { rcftRemoteSimpleModuleIndex Integer32, rcftRemoteSimpleModuleExist INTEGER, rcftRemoteSimpleModulePosition INTEGER, rcftRemoteSimpleModuleStatus INTEGER, rcftRemoteSimpleModuleType INTEGER } rcftRemoteSimpleModuleIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " SimpleModule 口的索引 " ::= { rcftRemoteSimpleModuleEntry 1 } rcftRemoteSimpleModuleExist OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " simplemodule 小模块是否在位，1：在位，2：不在位 " ::= {rcftRemoteSimpleModuleEntry 2} rcftRemoteSimpleModulePosition OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " SimpleModule的位置信息： bit7-4：盘 bit3-0：槽 " ::={ rcftRemoteSimpleModuleEntry 3} rcftRemoteSimpleModuleStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " Bit1：小模块智能非智能标志，0：非智能， 1：智能 " ::={ rcftRemoteSimpleModuleEntry 4} rcftRemoteSimpleModuleType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " SimpleModule类型： 对于非智能小模块： 1 一路232 2 两路232 3 一路422 4 一路485 5 两路485 6 以太网模块 7 开关量 8 电话用户端 9 电话中继端 10 两路高保真双向音频 11 两路高保真音频编码 12 两路高保真音频解码 智能小模块：1000+x，为对应的非智能小模块类型。 " ::= { rcftRemoteSimpleModuleEntry 5 } rcftRemoteVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The VLAN table. " ::= { rcftRemoteVLANObjects 1 } rcftRemoteVLANEntry OBJECT-TYPE SYNTAX RcftRemoteVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the VLAN table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex,rcftRemoteVLANIndex } ::= { rcftRemoteVLANTable 1 } RcftRemoteVLANEntry ::= SEQUENCE { rcftRemoteVLANIndex Integer32, rcftRemoteVLANStatus INTEGER, rcftRemoteVLANmember INTEGER, rcftRemoteVID INTEGER } rcftRemoteVLANIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " VLAN 表项 的索引 " ::= { rcftRemoteVLANEntry 1 } rcftRemoteVLANStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN 表项 状态 1：激活 2：挂起 " ::= { rcftRemoteVLANEntry 2 } rcftRemoteVLANmember OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN表项的端口列表。 bit31~0对应第32路~~第1路EthFe口，第n位为1表示第n+1端口为该VLAN成员。 例如：bit3=1，bit0=1，表示端口4和端口1为该VLAN的成员。 " ::= { rcftRemoteVLANEntry 3 } rcftRemoteVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " VLANID，范围1~4094。 " ::= { rcftRemoteVLANEntry 4 } ---------------------- FPGA 流量统计 ---------------------- rcftRemoteStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 局端设备 FPGA 侧的流量统计表. " ::= {rcftRemoteStatisticPerformance 1} rcftRemoteStatisticEntry OBJECT-TYPE SYNTAX RcftRemoteStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftSlotFPGAVCGIndex为索引 " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemotePortIndex } ::= { rcftRemoteStatisticTable 1 } RcftRemoteStatisticEntry ::= SEQUENCE { rcftRemotePortIndex Integer32, rcftRemotePortType INTEGER, rcftRemoteRxPackets Counter32, rcftRemoteRxLosPackets Counter32, rcftRemoteRxPreabErrPackets Counter32, rcftRemoteRxFCSErrPackets Counter32, rcftRemoteRxUnderSizePackets Counter32, rcftRemoteRxOverSizePackets Counter32, rcftRemoteRxPausePackets Counter32, rcftRemoteRxOamPackets Counter32, rcftRemoteRxBytes Counter32, rcftRemoteTxPackets Counter32, rcftRemoteTxFCSErrPackets Counter32, rcftRemoteTxPausePackets Counter32, rcftRemoteTxOamPackets Counter32, rcftRemoteTxBytes Counter32, rcftRemoteFluxTimer Counter32 } rcftRemotePortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 索引 " ::= { rcftRemoteStatisticEntry 1 } rcftRemotePortType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 接口类型 1：ethfe口 2：ethfx口 3：e1口 " ::= { rcftRemoteStatisticEntry 2 } rcftRemoteRxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收包数 " ::= { rcftRemoteStatisticEntry 3 } rcftRemoteRxLosPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收丢包数 " ::= { rcftRemoteStatisticEntry 4 } rcftRemoteRxPreabErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收前导码错误包数 " ::= { rcftRemoteStatisticEntry 5 } rcftRemoteRxFCSErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收FCS错误包数 " ::= { rcftRemoteStatisticEntry 6 } rcftRemoteRxUnderSizePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收超短包数 " ::= { rcftRemoteStatisticEntry 7 } rcftRemoteRxOverSizePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收超长报数 " ::= { rcftRemoteStatisticEntry 8 } rcftRemoteRxPausePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收PAUSE 包数 " ::= { rcftRemoteStatisticEntry 9 } rcftRemoteRxOamPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收OAM包数 " ::= { rcftRemoteStatisticEntry 10 } rcftRemoteRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收字节数 " ::= { rcftRemoteStatisticEntry 11 } rcftRemoteTxPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送包数 " ::= { rcftRemoteStatisticEntry 12 } rcftRemoteTxFCSErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送FCS错误包数（由GFP解帧模块检测到的） " ::= { rcftRemoteStatisticEntry 13 } rcftRemoteTxPausePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送PAUSE包数 " ::= { rcftRemoteStatisticEntry 14 } rcftRemoteTxOamPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送OAM包数 " ::= { rcftRemoteStatisticEntry 15 } rcftRemoteTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送字节数 " ::= { rcftRemoteStatisticEntry 16 } rcftRemoteFluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计时间 " ::= { rcftRemoteStatisticEntry 17 } rcftRemoteVCGTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteVCGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The VCG table. " ::= { rcftRemoteVCGObjects 1 } rcftRemoteVCGEntry OBJECT-TYPE SYNTAX RcftRemoteVCGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the VCG table. " INDEX { rcftChassisIndex, rcftSlotIndex, rcftRemoteDeviceIndex, rcftRemoteVCGIndex } ::= { rcftRemoteVCGTable 1 } RcftRemoteVCGEntry ::= SEQUENCE { rcftRemoteVCGIndex Integer32, rcftRemoteVCGStatus INTEGER, rcftRemoteVCGLoopStatus INTEGER, rcftRemoteVCGLcasXPR INTEGER, rcftRemoteVCGLcasXAR INTEGER, rcftRemoteVCGLcasXPT INTEGER, rcftRemoteVCGLcasXAT INTEGER, rcftRemoteVCGAlarmStatus INTEGER, rcftRemoteVCGRxISPTPID INTEGER, rcftRemoteVCGTxISPTPID INTEGER, rcftRemoteVCGBaseCoS INTEGER, rcftRemoteVCGVLANID INTEGER, rcftRemoteVCGMemberList OCTET STRING, rcftRemoteVCGMemberStatus OCTET STRING, rcftRemoteVCGMemberRxCode OCTET STRING, rcftRemoteVCGMemberTxCode OCTET STRING, rcftRemoteVCGMemberAlarmStatus OCTET STRING, rcftRemoteToLVCGMemberAlarmStatus OCTET STRING, rcftRemoteToLVCGMemberAlarmStatus OCTET STRING } rcftRemoteVCGIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " VCG 的索引 " ::= { rcftRemoteVCGEntry 1 } rcftRemoteVCGStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " bit10:CSF发送 1：使能，0：禁止 bit6：是否带tag 1：使能，0：禁止 bit5：CheckLoop。 1：使能，0：禁止 bit4：Fcs。 1：使能，0：禁止 bit3：GFP净荷扰码Scrb。 1：使能，0：禁止 bit2：VLI。 1：使能，0：禁止 bit1：Vcat。 1：使能，0：禁止 bit0：Lcas。 1：使能，0：禁止 LCAS on时，VCAT不可配（内部强制使能）。 只有LCAS off时，网管可配VCAT。 VLI始终可配，但是只在LCAS off、VCAT 禁止时配置生效。 " ::= {rcftRemoteVCGEntry 2} rcftRemoteVCGLoopStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 0：无环，1~63：表示有环的VCG号 " ::= {rcftRemoteVCGEntry 3} rcftRemoteVCGLcasXPR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 接收配置成员数（1-E1接口数目） " ::= {rcftRemoteVCGEntry 4} rcftRemoteVCGLcasXAR OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 接收实际成员数（1-E1接口数目） " ::= {rcftRemoteVCGEntry 5} rcftRemoteVCGLcasXPT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 发送配置成员数（1-E1接口数目） " ::= {rcftRemoteVCGEntry 6} rcftRemoteVCGLcasXAT OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " 发送实际成员数（1-E1接口数目） " ::= {rcftRemoteVCGEntry 7} rcftRemoteVCGAlarmStatus OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION " VCG 告警 bit0：GID bit1：LOA bit2：LFD bit3：CFS LCAS ON时的告警 bit4：TLCT bit5：PLCT bit6：TLCR bit7：PLCR bit8：对端GID： bit9：对端LOA bit10：对端LFD " ::= {rcftRemoteVCGEntry 8} rcftRemoteVCGRxISPTPID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 发送侧 TPID " ::= {rcftRemoteVCGEntry 9} rcftRemoteVCGTxISPTPID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " 接收侧 TPID " ::= {rcftRemoteVCGEntry 10} rcftRemoteVCGBaseCoS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " COS：0~7 " ::= {rcftRemoteVCGEntry 11} rcftRemoteVCGVLANID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION " VLANID " ::= {rcftRemoteVCGEntry 12} rcftRemoteVCGMemberList OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION " E1成员列表，每个字节表示1个成员对应的E1端口号。 此节点为字节串，各成员之间有先后顺序，字节串从左到右依次表示1-N个成员。 每个字节为0表示该成员无效。 " ::= { rcftRemoteVCGEntry 13 } rcftRemoteVCGMemberStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..15)) MAX-ACCESS read-write STATUS current DESCRIPTION " 此节点为字节串，各成员之间有先后顺序，字节串从左到右依次表示1-N个成员。 每个字节的： bit0：成员的接收RX状态。1：OK， 0：Error。 bit1：成员的发送TX状态。1：OK， 0：Error。 " ::= { rcftRemoteVCGEntry 14 } rcftRemoteVCGMemberRxCode OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION " 此节点为字节串，各成员之间有先后顺序，字节串从左到右依次表示1-N个成员。 每个字节的枚举值如下： VCG成员接收控制字： 1：FIXED 。固定带宽，不支持LCAS 2：ADD 。当前成员添加到VCG组中 3：NORM 。正常传送，当前成员已配置到VCG组中，且通道良好。 4：EOS 。该组中的最后一个成员 5：IDLE 。该成员没有配置到VCG组中 6：DNU 。该成员是VCG成员，但是通道故障。 " ::= { rcftRemoteVCGEntry 15 } rcftRemoteVCGMemberTxCode OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION " 此节点为字节串，各成员之间有先后顺序，字节串从左到右依次表示1-N个成员。 每个字节的枚举值如下： VCG成员发送控制字： 1：FIXED 。固定带宽，不支持LCAS 2：ADD 。当前成员添加到VCG组中 3：NORM 。正常传送，当前成员已配置到VCG组中，且通道良好。 4：EOS 。该组中的最后一个成员 5：IDLE 。该成员没有配置到VCG组中 6：DNU 。该成员是VCG成员，但是通道故障。 " ::= { rcftRemoteVCGEntry 16 } rcftRemoteVCGMemberAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION " 成员告警状态，此节点为字节串，各成员之间有先后顺序，字节串从左到右依次表示1-N个成员。 每个字节的bit位定义如下： VCG 成员的告警 bit3： LOA （与MND合并了） bit2： SQM bit1： CRC bit0： LOM " ::= { rcftRemoteVCGEntry 17 } rcftRemoteToLVCGMemberAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION " 对端VCG 成员告警状态，此节点为字节串，各成员之间有先后顺序，字节串从左到右依次表示1-N个成员。 每个字节的bit位定义如下： bit3： LOA （与MND合并了） bit2： SQM bit1： CRC bit0： LOM " ::= { rcftRemoteVCGEntry 18 } --------------------------VCG GFP帧流量统计-------------------------- rcftRemoteVCGStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcftRemoteVCGStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 局端设备GFP的统计表. " ::= {rcftRemoteVCGPerformance 1} rcftRemoteVCGStatisticEntry OBJECT-TYPE SYNTAX RcftRemoteVCGStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " 以rcftRemoteVCGIndex为索引 " AUGMENTS { rcftRemoteVCGEntry } ::= {rcftRemoteVCGStatisticTable 1} RcftRemoteVCGStatisticEntry ::= SEQUENCE { rcftRemoteVCGRxClientPackets Counter32, rcftRemoteVCGRxIdlePackets Counter32, rcftRemoteVCGRxMgmntPackets Counter32, rcftRemoteVCGRxFCSErrMgmntPackets Counter32, rcftRemoteVCGRxLenErrPackets Counter32, rcftRemoteVCGRxFCSErrClientPackets Counter32, rcftRemoteVCGRxThecErrPackets Counter32, rcftRemoteVCGRxEhecErrPackets Counter32, rcftRemoteVCGRxCIDErrPackets Counter32, rcftRemoteVCGRxSpareErrPackets Counter32, rcftRemoteVCGRxChecCorPackets Counter32, rcftRemoteVCGRxThecCorPackets Counter32, rcftRemoteVCGRxEhecCorPackets Counter32, rcftRemoteVCGRxBytes Counter32, rcftRemoteVCGTxClientPackets Counter32, rcftRemoteVCGTxIdlePackets Counter32, rcftRemoteVCGTxMgmntPackets Counter32, rcftRemoteVCGTxBytes Counter32, rcftRemoteVCGFluxTimer Counter32 } rcftRemoteVCGRxClientPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收客户数据包数 " ::= { rcftRemoteVCGStatisticEntry 1 } rcftRemoteVCGRxIdlePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收空闲数据包数 " ::= { rcftRemoteVCGStatisticEntry 2 } rcftRemoteVCGRxMgmntPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收网管数据包数 " ::= { rcftRemoteVCGStatisticEntry 3 } rcftRemoteVCGRxFCSErrMgmntPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收FCS错误包数 " ::= { rcftRemoteVCGStatisticEntry 4 } rcftRemoteVCGRxLenErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收长度错误包数 " ::= { rcftRemoteVCGStatisticEntry 5 } rcftRemoteVCGRxFCSErrClientPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收FCS错误客户数据包数 " ::= { rcftRemoteVCGStatisticEntry 6 } rcftRemoteVCGRxThecErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收类型域错误包数 " ::= { rcftRemoteVCGStatisticEntry 7 } rcftRemoteVCGRxEhecErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收扩展类型域错误包数 " ::= { rcftRemoteVCGStatisticEntry 8 } rcftRemoteVCGRxCIDErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收客户数据帧扩展域CID与期望值不同错误包数 " ::= { rcftRemoteVCGStatisticEntry 9 } rcftRemoteVCGRxSpareErrPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收客户数据帧扩展域Spare与期望值不同错误包数 " ::= { rcftRemoteVCGStatisticEntry 10 } rcftRemoteVCGRxChecCorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收帧头纠错包数 " ::= { rcftRemoteVCGStatisticEntry 11 } rcftRemoteVCGRxThecCorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收类型域纠错包数 " ::= { rcftRemoteVCGStatisticEntry 12 } rcftRemoteVCGRxEhecCorPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收扩展域纠错包数 " ::= { rcftRemoteVCGStatisticEntry 13 } rcftRemoteVCGRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收字节数 " ::= { rcftRemoteVCGStatisticEntry 14 } rcftRemoteVCGTxClientPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送客户包数 " ::= { rcftRemoteVCGStatisticEntry 15 } rcftRemoteVCGTxIdlePackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送空闲包数 " ::= { rcftRemoteVCGStatisticEntry 16 } rcftRemoteVCGTxMgmntPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送空闲包数 " ::= { rcftRemoteVCGStatisticEntry 17 } rcftRemoteVCGTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送字节数 " ::= { rcftRemoteVCGStatisticEntry 18 } rcftRemoteVCGFluxTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计时间 " ::= { rcftRemoteVCGStatisticEntry 19 } --------------------------VCG 的告警------------------------ rcftRemoteVCGGIDTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的VCG-ID 错误 GID告警 " ::= { rcftRemoteVCGTraps 1 } rcftRemoteVCGLOATraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的LOA告警 LOA：VCAT使能时，成员相对延时差超过设定范围告警的或。 " ::= { rcftRemoteVCGTraps 2 } rcftRemoteVCGLFDTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的LFD告警 LFD：GFP帧定界告警 " ::= { rcftRemoteVCGTraps 3 } rcftRemoteVCGCSFTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的CSF告警 CSF：GFP客户信号失效告警 " ::= { rcftRemoteVCGTraps 4 } rcftRemoteVCGTLCTTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " TLCT：VCG发送全部成员实效告警 " ::= { rcftRemoteVCGTraps 5 } rcftRemoteVCGTLCRTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " TLCR：VCG发送全部成员实效告警 " ::= { rcftRemoteVCGTraps 6 } rcftRemoteVCGToLGIDTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " 对端GID告警， 1：恢复，2：告警 " ::= { rcftRemoteVCGTraps 7 } rcftRemoteVCGToLLOATraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " 对端VCG LOA告警 1：恢复，2：告警 " ::= { rcftRemoteVCGTraps 8 } rcftRemoteVCGToLLFDTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGAlarmStatus } STATUS current DESCRIPTION " 对端VCG LFP告警 1：恢复，2：告警 " ::= { rcftRemoteVCGTraps 9 } --------------------------VCG 成员的告警------------------------ rcftRemoteVCGMemberLOMTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGMemberAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的复帧失步LOM 告警 " ::= { rcftRemoteVCGTraps 10 } rcftRemoteVCGMemberSQMTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGMemberAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的SQM告警 SQM ：VCAT使能时，成员的SQ值不符告警。 " ::= { rcftRemoteVCGTraps 11 } rcftRemoteVCGMemberCRCTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGMemberAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的CRC告警 " ::= { rcftRemoteVCGTraps 12 } rcftRemoteVCGMemberLOATraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteVCGMemberAlarmStatus } STATUS current DESCRIPTION " VCG成员的 的LOA告警 LOA：成员的相对延时差超过设定范围告警 " ::= { rcftRemoteVCGTraps 13 } rcftRemoteVCGToLMemberLOMTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteToLVCGMemberAlarmStatus } STATUS current DESCRIPTION " 对端VCG成员的 的LOA告警 LOA：成员的相对延时差超过设定范围告警 " ::= { rcftRemoteVCGTraps 14 } rcftRemoteVCGToLMemberSQMTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteToLVCGMemberAlarmStatus } STATUS current DESCRIPTION " 对端VCG成员的 的LOA告警 LOA：成员的相对延时差超过设定范围告警 " ::= { rcftRemoteVCGTraps 15 } rcftRemoteVCGToLMemberCRCTraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteToLVCGMemberAlarmStatus } STATUS current DESCRIPTION " 对端VCG成员的 的LOA告警 LOA：成员的相对延时差超过设定范围告警 " ::= { rcftRemoteVCGTraps 16 } rcftRemoteVCGToLMemberLOATraps NOTIFICATION-TYPE OBJECTS{ rcftRemoteToLVCGMemberAlarmStatus } STATUS current DESCRIPTION " 对端VCG成员的 的LOA告警 LOA：成员的相对延时差超过设定范围告警 " ::= { rcftRemoteVCGTraps 17 } END