-- ======================================================================= -- Syslog Service info -- -- Version 0.1 Created 2003.12.17 by GONGGUIDONG -- This version of MIB is created just for the use of Network Management Systems -- display and config the syslog service. -- log: -- bug6602, redefine LogFacility as per RFC5424 by liujianwen 20110518 -- change raisecomSyslogService from OBJECT-TYPE to MODULE-IDENTITY by gongguidong 20040205 -- change raisecomSyslogDirection from read-write to read-only by gongguidong 20040205 -- -- Copyright(c) 2003-2005 by RAISECOM TECH, Ltd. -- ======================================================================= --RAISECOM-SYSLOG-SERVICE-MIB --2003/2/17 -- This MIB provides a means to gather syslog messages generated -- by the RaisecomOS -- Terminology: -- Various textual messages are generated by the RaisecomOS. The RaisecomOS -- can be configured such that these messages are sent to a "syslog" -- server. These messages are hereupon referred to as "syslog -- messages" in this document. Note: Messages generated as a result -- of entering CLI debug commands are not made available via the SNMP -- at this time. -- -- All syslog messages have the following attributes: -- timestamp (optional), facility name (where the message came -- from), severity, message name, message text -- -- The following example is often seen: -- %SYS-5-CONFIG_I: Configured from console ... -- where facility=SYS, severity=5, message name=CONFIG_I -- =========================================================================== -- RAISECOM syslog service objects --修改信息： --2012-09-14,ghy,ESW00001109,修改了节点raisecomLogServerIpAddress的数据类型为InetAddress RAISECOM-SYSLOG-SERVICE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, InetAddress FROM INET-ADDRESS-MIB RowStatus, TruthValue FROM SNMPv2-TC EnableVar FROM SWITCH-TC raisecomAgent FROM RAISECOM-BASE-MIB; -- Syslog Service MIB raisecomSyslogService MODULE-IDENTITY LAST-UPDATED "200412210000Z" ORGANIZATION "RAISECOM TECH, Ltd." CONTACT-INFO "www.raisecom.com" DESCRIPTION "The MIB module defining objects for Syslog Service" ::= { raisecomAgent 4 } -- Textual Conventions SyslogSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The severity of a syslog message. The enumeration values are equal to the values that syslog uses + 1. For example, with syslog, emergency=0." SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), info(7), debug(8) } LogFacility ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The facility of a syslog message. The enumeration values are equal to the values that syslog uses + 1. For example, with syslog, auth=4." SYNTAX INTEGER { kern(1), user(2), mail(3), daemon(4), auth(5), syslog(6), lpr(7), news(8), uucp(9), cron(10), security(11), ftp(12), ntp(13), audit(14), alert(15), clock(16), local0(17), local1(18), local2(19), local3(20), local4(21), local5(22), local6(23), local7(24) } raisecomSyslogMibObjects OBJECT IDENTIFIER ::= { raisecomSyslogService 1 } -- Subgroups 供以后扩展使用 raisecomLogBasic OBJECT IDENTIFIER ::= { raisecomSyslogMibObjects 1 } raisecomLogServer OBJECT IDENTIFIER ::= { raisecomSyslogMibObjects 2 } raisecomDebug OBJECT IDENTIFIER ::= { raisecomSyslogMibObjects 3 } raisecomLogTrapGroup OBJECT IDENTIFIER ::= { raisecomSyslogMibObjects 4 } -- raisecomLogBasic -- scalars raisecomLogEnable OBJECT-TYPE SYNTAX EnableVar ACCESS read-write STATUS current DESCRIPTION "The administration status of the syslog function is enable or disable." ::= { raisecomLogBasic 1 } raisecomLogRateLimit OBJECT-TYPE SYNTAX INTEGER (0..10000) ACCESS read-write STATUS current DESCRIPTION "The Rate Limit for syslog." ::= { raisecomLogBasic 2 } raisecomLogDropMessages OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS current DESCRIPTION "The number of log messages that syslog droped." ::= { raisecomLogBasic 3 } raisecomLogConsoleLogedMessages OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The number of messages that syslog loged to console." ::= { raisecomLogBasic 4 } raisecomLogMonitorMessages OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS deprecated DESCRIPTION "The number of messages that syslog loged to Monitor." ::= { raisecomLogBasic 5 } raisecomLogTimeStamp OBJECT-TYPE SYNTAX INTEGER { no-timestamp(1), date-timestamp(2), up-timestamp(3) } ACCESS read-write STATUS current DESCRIPTION " no-timestamp no time stamp date-timestamp : APR-26-2004 17:27:45 up-timestamp 17:27:45 time from start up " DEFVAL { date-timestamp } ::= { raisecomLogBasic 6 } raisecomLogDebugTimeStamp OBJECT-TYPE SYNTAX INTEGER { no-timestamp(1), date-timestamp(2), up-timestamp(3) } ACCESS read-write STATUS current DESCRIPTION " no-timestamp no time stamp date-timestamp : APR-26-2004 17:27:45 up-timestamp 17:27:45 time from start up " DEFVAL { no-timestamp } ::= { raisecomLogBasic 7 } raisecomLogHistoryEnable OBJECT-TYPE SYNTAX EnableVar ACCESS read-write STATUS current DESCRIPTION "The administration status of the syslog messages to history table is enable or disable." ::= { raisecomLogBasic 8 } raisecomLogHistorySize OBJECT-TYPE SYNTAX INTEGER (1..500) ACCESS read-write STATUS current DESCRIPTION "Size of the history table." DEFVAL { 1 } ::= { raisecomLogBasic 9 } raisecomLogBufferSize OBJECT-TYPE SYNTAX INTEGER (4..256) ACCESS read-write STATUS current DESCRIPTION "Size of log buffer." DEFVAL { 4 } ::= { raisecomLogBasic 10 } raisecomLogSequenceNumEnable OBJECT-TYPE SYNTAX EnableVar ACCESS read-write STATUS current DESCRIPTION "The administration status of the syslog message sequence number show is enable or disable." ::= { raisecomLogBasic 11 } raisecomDebugModuleLevel OBJECT-TYPE SYNTAX INTEGER { none(1), high(2), normal(3), low(4) } ACCESS read-write STATUS current DESCRIPTION "The debug level of syslog messages." DEFVAL { none } ::= { raisecomLogBasic 12 } raisecomLogDebugDropMessages OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-only STATUS current DESCRIPTION "The number of debug messages that syslog droped." ::= { raisecomLogBasic 13 } raisecomLogBufferClear OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS current DESCRIPTION "This object instructs the management entity to delete the whole syslog messages in syslog buffer." ::= { raisecomLogBasic 14 } raisecomLogConfig OBJECT-TYPE SYNTAX EnableVar ACCESS read-write STATUS current DESCRIPTION "The administration status of the logging config function is enable or disable." ::= { raisecomLogBasic 15 } raisecomLogConfigLevel OBJECT-TYPE SYNTAX SyslogSeverity ACCESS read-write STATUS current DESCRIPTION "The severity of log messages which is generated from user command." DEFVAL { info } ::= { raisecomLogBasic 16 } -- raisecomLogDestinationTable raisecomLogDestinationTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomLogDestinationEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of destination entries." ::= { raisecomLogBasic 17 } raisecomLogDestinationEntry OBJECT-TYPE SYNTAX RaisecomLogDestinationEntry ACCESS not-accessible STATUS current DESCRIPTION "The syslog destination list group infomation entry." INDEX { raisecomLogDestIndex } ::= { raisecomLogDestinationTable 1 } RaisecomLogDestinationEntry ::= SEQUENCE { raisecomLogDestIndex INTEGER, raisecomLogDestEnable EnableVar, raisecomLogDestServrity SyslogSeverity, raisecomLogDestDiscriminator INTEGER, raisecomLogDestLoggedMessages INTEGER, raisecomLogDestDropMessages INTEGER } raisecomLogDestIndex OBJECT-TYPE SYNTAX INTEGER { buffer(1), console(2), trap(3), file(4) } ACCESS not-accessible STATUS current DESCRIPTION "This object index of syslog destination entry." ::= { raisecomLogDestinationEntry 1 } raisecomLogDestEnable OBJECT-TYPE SYNTAX EnableVar ACCESS read-write STATUS current DESCRIPTION "The administration status of the syslog destination is enable or disable." ::= { raisecomLogDestinationEntry 2 } raisecomLogDestServrity OBJECT-TYPE SYNTAX SyslogSeverity ACCESS read-write STATUS current DESCRIPTION "The severity of log messages which will be sent to syslog destination." ::= { raisecomLogDestinationEntry 3 } raisecomLogDestDiscriminator OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS current DESCRIPTION "The discriminator associated with the specified destination." ::= { raisecomLogDestinationEntry 4 } raisecomLogDestLoggedMessages OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "The count of messages that sent to the destination." ::= { raisecomLogDestinationEntry 5 } raisecomLogDestDropMessages OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS current DESCRIPTION "The count of messages that droped by the destination." ::= { raisecomLogDestinationEntry 6 } -- raisecomLogDiscriminatorTable raisecomLogDiscriminatorTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomLogDiscriminatorEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of discriminator entries." ::= { raisecomLogBasic 18 } raisecomLogDiscriminatorEntry OBJECT-TYPE SYNTAX RaisecomLogDiscriminatorEntry ACCESS not-accessible STATUS current DESCRIPTION "The syslog discriminator list group infomation entry." INDEX { raisecomLogDiscriminatorIndex } ::= { raisecomLogDiscriminatorTable 1 } RaisecomLogDiscriminatorEntry ::= SEQUENCE { raisecomLogDiscriminatorIndex INTEGER, raisecomLogDiscriminatorFacilityAct INTEGER, raisecomLogDiscriminatorFacilityStr OCTET STRING, raisecomLogDiscriminatorMnemonicsAct INTEGER, raisecomLogDiscriminatorMnemonicsStr OCTET STRING, raisecomLogDiscriminatorMsgbodyAct INTEGER, raisecomLogDiscriminatorMsgbodyStr OCTET STRING } raisecomLogDiscriminatorIndex OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS not-accessible STATUS current DESCRIPTION "This object index of syslog discriminator entry." ::= { raisecomLogDiscriminatorEntry 1 } raisecomLogDiscriminatorFacilityAct OBJECT-TYPE SYNTAX INTEGER { none(1), drops(2), includes(3) } ACCESS read-write STATUS current DESCRIPTION "The action for facility filter." ::= { raisecomLogDiscriminatorEntry 2 } raisecomLogDiscriminatorFacilityStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) ACCESS read-write STATUS current DESCRIPTION "The string content for facility filter." ::= { raisecomLogDiscriminatorEntry 3 } raisecomLogDiscriminatorMnemonicsAct OBJECT-TYPE SYNTAX INTEGER { none(1), drops(2), includes(3) } ACCESS read-write STATUS current DESCRIPTION "The action for mnemonics filter." ::= { raisecomLogDiscriminatorEntry 4 } raisecomLogDiscriminatorMnemonicsStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..30)) ACCESS read-write STATUS current DESCRIPTION "The string content for mnemonics filter." ::= { raisecomLogDiscriminatorEntry 5 } raisecomLogDiscriminatorMsgbodyAct OBJECT-TYPE SYNTAX INTEGER { none(1), drops(2), includes(3) } ACCESS read-write STATUS current DESCRIPTION "The action for message body filter." ::= { raisecomLogDiscriminatorEntry 6 } raisecomLogDiscriminatorMsgbodyStr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) ACCESS read-write STATUS current DESCRIPTION "The string content for message body filter." ::= { raisecomLogDiscriminatorEntry 7 } -- raisecomLogHistoryTable raisecomLogHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomLogHistoryEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of history entries." ::= { raisecomLogBasic 19 } raisecomLogHistoryEntry OBJECT-TYPE SYNTAX RaisecomLogHistoryEntry ACCESS not-accessible STATUS current DESCRIPTION "The syslog history list group infomation entry." INDEX { raisecomLogHistIndex } ::= { raisecomLogHistoryTable 1 } RaisecomLogHistoryEntry ::= SEQUENCE { raisecomLogHistIndex INTEGER, raisecomLogHistFacility OCTET STRING, raisecomLogHistSeverity SyslogSeverity, raisecomLogHistMnemonics OCTET STRING, raisecomLogHistMsgbody OCTET STRING, raisecomLogHistTimestamp INTEGER } raisecomLogHistIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS current DESCRIPTION "This object index of syslog history entry." ::= { raisecomLogHistoryEntry 1 } raisecomLogHistFacility OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..20)) ACCESS read-only STATUS current DESCRIPTION "The facility of message sent to hisstory table." ::= { raisecomLogHistoryEntry 2 } raisecomLogHistSeverity OBJECT-TYPE SYNTAX SyslogSeverity ACCESS read-only STATUS current DESCRIPTION "The severity of message sent to hisstory table." ::= { raisecomLogHistoryEntry 3 } raisecomLogHistMnemonics OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..30)) ACCESS read-only STATUS current DESCRIPTION "The mnemonics of message sent to hisstory table." ::= { raisecomLogHistoryEntry 4 } raisecomLogHistMsgbody OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..255)) ACCESS read-only STATUS current DESCRIPTION "The content of syslog message." ::= { raisecomLogHistoryEntry 5 } raisecomLogHistTimestamp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The time stamp type of history entry." ::= { raisecomLogHistoryEntry 6 } -- The raisecom Syslog Service Server Control group -- -- The raisecom syslog service server control contains -- configing syslog service logto server setting. -- The raisecomSyslogServiceServerControl Table raisecomLogMaxNumberOfLogServer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The Max Number of syslog server " ::= { raisecomLogServer 1 } raisecomLogServerNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The Number of syslog server that has been configured " ::= { raisecomLogServer 2 } raisecomLogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomLogServerEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of raisecomSyslogServiceServer entries." ::= { raisecomLogServer 3 } raisecomLogServerEntry OBJECT-TYPE SYNTAX RaisecomLogServerEntry ACCESS not-accessible STATUS current DESCRIPTION "The syslog service server list group infomation entry." INDEX { raisecomLogServerIpAddress } ::= { raisecomLogServerTable 1 } RaisecomLogServerEntry ::= SEQUENCE { raisecomLogServerIpAddress InetAddress, raisecomLogServerPort INTEGER, raisecomLogFacility LogFacility, raisecomLogServerMaxSeverity SyslogSeverity, raisecomLogServerRowStatus RowStatus, raisecomLogServerLoggedMessages INTEGER, raisecomLogServerDropMessages INTEGER, raisecomLogServerDiscriminator INTEGER } raisecomLogServerIpAddress OBJECT-TYPE SYNTAX InetAddress ACCESS not-accessible STATUS current DESCRIPTION "The value of this object is the IpAddress of the server to which the syslog messages will be sent." ::= { raisecomLogServerEntry 1 } raisecomLogServerPort OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS current DESCRIPTION "The value of this object is the port of the server to which the syslog messages will be sent." ::= { raisecomLogServerEntry 2 } raisecomLogFacility OBJECT-TYPE SYNTAX LogFacility ACCESS read-create STATUS current DESCRIPTION "The facility specifies the subsystem that produced the message, i.e. all mail programs log with the mail facility (LOG_MAIL) if they log using syslog.The default value is local7." ::= { raisecomLogServerEntry 3 } raisecomLogServerMaxSeverity OBJECT-TYPE SYNTAX SyslogSeverity ACCESS read-create STATUS current DESCRIPTION "The max severity of messages which will be sent to syslog host. The default value is info ." ::= { raisecomLogServerEntry 4 } raisecomLogServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { raisecomLogServerEntry 5 } raisecomLogServerLoggedMessages OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The number of log messages which send to syslog server." ::= { raisecomLogServerEntry 6 } raisecomLogServerDropMessages OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "The number of log messages which droped by syslog server." ::= { raisecomLogServerEntry 7 } raisecomLogServerDiscriminator OBJECT-TYPE SYNTAX INTEGER ACCESS read-create STATUS current DESCRIPTION "The discriminator associated with the specified syslog server." ::= { raisecomLogServerEntry 8 } --raisecomDebug raisecomDebugTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomDebugEntry ACCESS not-accessible STATUS current DESCRIPTION "A list of raisecom Debug entries." ::= { raisecomDebug 1 } raisecomDebugEntry OBJECT-TYPE SYNTAX RaisecomDebugEntry ACCESS not-accessible STATUS current DESCRIPTION "The debug infomation entry." INDEX { raisecomDebugIndex } ::= { raisecomDebugTable 1 } RaisecomDebugEntry ::= SEQUENCE { raisecomDebugIndex INTEGER, raisecomDebugModuleName OCTET STRING, raisecomDebugModuleEnable EnableVar, raisecomDebugMsgName OCTET STRING } raisecomDebugIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS current DESCRIPTION "This object index of system debug entry." ::= { raisecomDebugEntry 1 } raisecomDebugModuleName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) ACCESS read-write STATUS current DESCRIPTION "This name of debugging module ." ::= { raisecomDebugEntry 2 } raisecomDebugModuleEnable OBJECT-TYPE SYNTAX EnableVar ACCESS read-write STATUS current DESCRIPTION "This switch of specific module ." ::= { raisecomDebugEntry 3 } raisecomDebugMsgName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..30)) ACCESS read-write STATUS current DESCRIPTION "The name of syslog debug message." ::= { raisecomDebugEntry 4 } -- raisecomLogTrapGroup raisecomLogTrap NOTIFICATION-TYPE OBJECTS {raisecomLogHistFacility, raisecomLogHistSeverity, raisecomLogHistMnemonics, raisecomLogHistMsgbody, raisecomLogHistTimestamp } STATUS current DESCRIPTION "Syslog message trap." ::= { raisecomLogTrapGroup 1 } END