-- ======================================================================= -- RAISECOM-OPTICAL-UDETH-INTERFACE-MIB.my -- -- Version info -- -- Copyright(c) 2003-2005 by RAISECOM TECH, Ltd. -- All rights reserved. -- ======================================================================= --在rcOptUdEthInterfaceMaxFrameLen中添加新选项1632，add by sujun 20130506 RAISECOM-OPTICAL-UDETH-INTERFACE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE,NOTIFICATION-TYPE,Integer32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC ifIndex FROM IF-MIB optUdSysMgmt FROM RAISECOM-BASE-MIB RcOptIfModuleType FROM RAISECOM-OPTICAL-MODULE-TYPE-MIB rcNotifsTrapLocation FROM RAISECOM-NOTIFICATION-MIB rcEntPhysicalID FROM RAISECOM-OPTICAL-ENTITY-MIB; raisecomOptUdEthInterfaceMib MODULE-IDENTITY LAST-UPDATED "1307090000Z" ORGANIZATION "RaiseCom Technology CO.,LTD" CONTACT-INFO " " DESCRIPTION "The MIB module to describe Ether interface objects." REVISION "0711290000Z" DESCRIPTION " 初始版本，由RAISECOM-OPTICAL-ETH-INTERFACE-MIB.my修改得来 1、增加rcEntPhysicalID作为索引 2、增加rcOptUdEthInterfaceMaxFrameLength,按字节数指定最大帧长 3、增加rcOptUdEthIfStatisticTable,表项基本参照IF-MIB中的统计信息 4、增加rcOptUdEthlinkDownTrap、rcOptUdEthlinkUpTrap " REVISION "0801020000Z" DESCRIPTION " 同步RAISECOM-OPTICAL-ETH-INTERFACE-MIB.my所做修改，增加rcOptUdEthInterfaceBandwidth、rcOptUdEthInterfaceBandwidthStatus、rcOptUdEthInterfaceCheckLoopbackStatus、rcOptUdEthInterfaceCheckLoopback、rcOptUdEthInterfaceModuleType " REVISION "0802150000Z" DESCRIPTION " 同步RAISECOM-OPTICAL-ETH-INTERFACE-MIB.my所做修改,增加 rcOptUdEthInterfaceRxBandwidth 发送带宽配置 rcOptUdEthInterfaceRxBandwidthStatus 发送带宽状态 rcOptUdEthInterfaceTxBandwidth 接收带宽配置 rcOptUdEthInterfaceTxBandwidthStatus 接收带宽状态 " REVISION "0903160000Z" DESCRIPTION " 增加了统计量 rcOptUdEthIfStatisticInPkts 以太网接收包统计, rcOptUdEthIfStatisticInPreambleBitErrorPkts 前导码错误包统计, rcOptUdEthIfStatisticInFCSErrorPkts FCS校验错误包统计, rcOptUdEthIfStatisticInUndersizePkts 超短包错误统计, rcOptUdEthIfStatisticInOversizePkts 超长包错误统计, rcOptUdEthIfStatisticInPausePkts 接收PAUSE帧统计, rcOptUdEthIfStatisticInOAMPkts 接收OAM帧统计, rcOptUdEthIfStatisticOutPkts 以太网发送包统计, rcOptUdEthIfStatisticOutFCSErrorPkts 解帧以太网FCS错误帧, rcOptUdEthIfStatisticOutPausePkts 发送PAUSE帧统计, rcOptUdEthIfStatisticOutOAMPkts 发送OAM帧统计 在rcOptUdEthInterfaceStatus中，添加了2个bit的定义，定义为端口关闭原因 " REVISION "1005050000Z" DESCRIPTION " 1、add rcOptUdEthInterfaceErrorStatsThreshold 2、增加rcOptUdEthInterfaceType的枚举3-7. 3、rcOptUdEthInterfaceStatus bit16:combo接口的实际工作接口类型 1:光口，0：电口 都是从ethif mib表兼容过来。 --by huxuehai" REVISION "1006180000Z" DESCRIPTION " 增加 rcOptUdEthIfStatisticTimeStamp 流量统计上报时间戳 ----by wuyanxiong " REVISION "1006280000Z" DESCRIPTION " 1、增加 rcOptUdEthInterfaceFaultPass 故障转移功能设置 rcOptUdEthInterfaceOutSelect 以太网出口选择 2、增加rcOptUdEthInterfaceStatus bit定义： Bit17:故障转移状态 1：使能，0：禁止 ----by wuyanxiong " REVISION "1007300000Z" DESCRIPTION " 1、去掉rcOptUdEthInterfaceOutSelect 以太网出口选择 ----by wuyanxiong " REVISION "1009100000Z" DESCRIPTION " 1、增加 rcOptUdEthInterfaceStatus bit位定义 Bit18:故障转移关闭原因 （bit15-14 = 01时有效）0：因本端其他端口故障转移关，1：因对端端口故障转移关 ----by wuyanxiong " REVISION "1009140000Z" DESCRIPTION " 1、增加 rcOptUdEthInterfaceBandwidthStep 带宽粒度 ----by wuyanxiong " REVISION "201009270000Z" DESCRIPTION " 1. 解决ethif与udethif中rcOptUdEthInterfaceStatus节点冲突， 为了与Ethif对齐，保留bit20 bit19，增加bit21:接收到错误报文数超过门限阈值告警状态 ----by leishenghua" REVISION "1012020000Z" DESCRIPTION " 1、把带宽粒度rcOptUdEthInterfaceBandwidthStep 改为接收带宽颗粒度 rcOptUdEthInterfaceRxBandwidthStep 2、同时增加发送带宽颗粒度 rcOptUdEthInterfaceTxBandwidthStep ----by wuyanxiong " REVISION "1101040000Z" DESCRIPTION " rcOptUdEthIfStatisticInOctets Integer32--> Counter64 rcOptUdEthIfStatisticOutOctets Integer32--> Counter64 ----by kuanglili " REVISION "1106300000Z" DESCRIPTION " 1、增加rcOptUdEthInterfaceStatus bit定义： Bit22:光口发送使能状态 1：使能，0：禁止 2、增加 rcOptUdEthInterfaceTxdisable 光口发送使能设置 ----by hejuan " REVISION "1109280000Z" DESCRIPTION " 1、增加 rcOptUdEthInterfaceRcLinkdisable RcLink功能使能设置 ----by liufei " REVISION "1206010000Z" DESCRIPTION " 1 增加rcOptUdEthInterfacePad 最小长度填充设置 ----by yz " REVISION "1205160000Z" DESCRIPTION " 1、增加 rcOptUdEthInterfacePhymode Phy芯片模式设置 ----by liufei " REVISION "1307090000Z" DESCRIPTION " 1、增加 rcOptUdEthInterfaceStatus bit位定义 -- bit27:以太网mac环回状态 1:环回 0:无环回 -- bit26:以太网phy环回状态 1:环回 0:无环回 -- bit25:远端收发器掉电告警状态 1: 告警 0:正常 -- bit24:phy模式 1：serdes，0：sgmii -- bit23:RcLink使能状态 1：使能，0：禁止 2、增加以太网接口命令rcOptUdEthInterfaceAdminCmd bit位定义 -- bit2：端口phy环回命令：1：使能环回，0：禁止 -- bit3：端口mac环回命令：1：使能环回，0：禁止 ----by zhuyufeng " ::= { optUdSysMgmt 20 } --对象定义 rcOptUdEthInterfaceObjects OBJECT IDENTIFIER ::= { raisecomOptUdEthInterfaceMib 1 } rcOptUdEthNotifications OBJECT IDENTIFIER ::= { raisecomOptUdEthInterfaceMib 2 } -- ------------------------------------------------------------ -- 以太网接口物理层接口配置 -- ------------------------------------------------------------ rcOptUdEthInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RcOptUdEthInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table holding information related to the interface module status." ::= { rcOptUdEthInterfaceObjects 1 } rcOptUdEthInterfaceEntry OBJECT-TYPE SYNTAX RcOptUdEthInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX {rcEntPhysicalID, ifIndex } ::= { rcOptUdEthInterfaceTable 1 } RcOptUdEthInterfaceEntry ::= SEQUENCE { rcOptUdEthInterfaceId Integer32, rcOptUdEthInterfaceDescr DisplayString, rcOptUdEthInterfaceAttribute INTEGER, rcOptUdEthInterfaceType INTEGER, rcOptUdEthInterfaceStatus Integer32, rcOptUdEthInterfaceAutoMdi INTEGER, rcOptUdEthInterfaceAutoNego INTEGER, rcOptUdEthInterfaceFlowControl INTEGER, rcOptUdEthInterfaceAdminCmd Integer32, rcOptUdEthInterfaceSpeed INTEGER, rcOptUdEthInterfaceDuplex INTEGER, rcOptUdEthInterfaceMaxFrameLen INTEGER, rcOptUdEthInterfaceALS INTEGER, rcOptUdEthInterfaceMaxFrameLength INTEGER, rcOptUdEthInterfaceBandwidth Integer32, rcOptUdEthInterfaceBandwidthStatus Integer32, rcOptUdEthInterfaceCheckLoopback INTEGER, rcOptUdEthInterfaceCheckLoopbackStatus OCTET STRING (SIZE (16)), rcOptUdEthInterfaceModuleType RcOptIfModuleType, rcOptUdEthInterfaceRxBandwidth Integer32, rcOptUdEthInterfaceRxBandwidthStatus Integer32, rcOptUdEthInterfaceTxBandwidth Integer32, rcOptUdEthInterfaceTxBandwidthStatus Integer32, rcOptUdEthInterfaceErrorStatsThreshold Integer32, rcOptUdEthInterfaceFaultPass INTEGER, rcOptUdEthInterfaceRxBandwidthStep INTEGER, rcOptUdEthInterfaceTxBandwidthStep INTEGER, rcOptUdEthInterfaceTxdisable INTEGER, rcOptUdEthInterfaceRcLinkdisable INTEGER, rcOptUdEthInterfacePad INTEGER, rcOptUdEthInterfacePhymode INTEGER } rcOptUdEthInterfaceId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " -- 接口ID, 第一个接口Id为1,依次类推 " ::={ rcOptUdEthInterfaceEntry 1 } rcOptUdEthInterfaceDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " -- 接口描述 " ::={ rcOptUdEthInterfaceEntry 2 } rcOptUdEthInterfaceAttribute OBJECT-TYPE SYNTAX INTEGER { outertrans(1), outeresw(2), innertrans(3), inneresw(4), switchableesw(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " -- 接口属性 1:外部传输业务网口，暴露在面板上的，传输业务以太网接口，例如EOS单盘的以太网口 2:外部以太网交换网口，暴露在面板上的，可以进行以太网交换相关配置的太网接口，例如交换盘的GE口 3:内部传输业务网口，没有暴露在面板上的，传输业务以太网接口，例如rc956上协转FPGA上的以太网口 4:内部以太网交换网口，没有暴露在面板上的，可以进行以太网交换相关配置的太网接口，例如rc956交换芯片上与e1相对的以太网口 5:可以倒换的以太网交换网口，例如rc956上可以倒换到外部的网口，它的当前状态可以通过rcOptUdEthInterfaceStatus的0比特获得 " ::={ rcOptUdEthInterfaceEntry 3 } rcOptUdEthInterfaceType OBJECT-TYPE SYNTAX INTEGER { electrical(1), optical(2), electrical100M(3), optical100M(4), electrical1000M(5), optical1000M(6), combo(7) } MAX-ACCESS read-only STATUS current DESCRIPTION " -- 接口类型 1:电口 2:光口 3:百兆电口 4:百兆光口 5:千兆电口 6:千兆光口 7:combo口 " ::={ rcOptUdEthInterfaceEntry 4 } rcOptUdEthInterfaceStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " -- eth接口的状态； -- bit27:以太网mac环回状态 1:环回 0:无环回 -- bit26:以太网phy环回状态 1:环回 0:无环回 -- bit25:远端收发器掉电告警状态 1: 告警 0:正常 -- bit24:phy模式 1：serdes，0：sgmii -- bit23:RcLink使能状态 1：使能，0：禁止 -- bit22:光口发送使能状态: 1:使能 0:禁止 -- bit21:接收到错误报文数超过门限阈值告警状态： 1：越限， 0：没有越限 -- bit20:保留，不推荐使用 bit19:保留，不推荐使用 -- Bit18:故障转移关闭原因 （bit15-14 = 01时有效）0：因本端其他端口故障转移关，1：因对端端口故障转移关 -- bit17:故障转移状态 1：使能，0：禁止 -- bit16:combo接口的实际工作接口类型 1:光口，0：电口 -- bit15:端口关闭原因(bit4=0时有效)： 00：因网管命令关， 01：因故障转移关 bit14: 10：因ALS关， 11：因检测到环回关 -- bit13:自适应工作状态： 1：成功， 0：失败 -- bit12:energy： 1：无能量，光纤或电缆尚未连接 0：有能量，光纤或电缆已经连接（目前只有交换盘关心这个bit） -- bit11:ALS： 1：使能， 0：禁止 -- bit10:接口状态： 1：交叉， 0：直连 -- bit9:自适应状态： 1：使能， 0：禁止 -- bit8:流控状态： 1：使能， 0：禁止 -- bit7:光口tlink状态： 1：Link up 0：Link Down -- bit6:光口rlink状态： 1：Link up 0：Link Down -- bit5:电口连接状态： 1：Link up 0：Link Down -- bit4:端口状态： 1：使能 0：禁止/关闭 -- bit3 bit2:连接速度： 11:1000M 10：100M 01：10M -- bit1:双工状态： 1：全双工 0：半双工 -- bit0:以太口的位置 0：出口在前面板 1：出口到背板 " ::= { rcOptUdEthInterfaceEntry 5 } rcOptUdEthInterfaceAutoMdi OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口自动交叉功能：（1：使能，2：禁止） " ::= { rcOptUdEthInterfaceEntry 6 } rcOptUdEthInterfaceAutoNego OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口自适应功能:（1：使能，2：禁止） " ::= { rcOptUdEthInterfaceEntry 7 } rcOptUdEthInterfaceFlowControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口的流控功能:（1：打开，2：关闭） " ::= { rcOptUdEthInterfaceEntry 8 } rcOptUdEthInterfaceAdminCmd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口的端口管理状态: -- bit0: 端口管理状态：1：使能，0：禁止 -- bit1：端口统计命令：1：清空当前报文统计信息 -- bit2：端口phy环回命令：1：使能环回，0：禁止 -- bit3：端口mac环回命令：1：使能环回，0：禁止 " ::= { rcOptUdEthInterfaceEntry 9 } rcOptUdEthInterfaceSpeed OBJECT-TYPE SYNTAX INTEGER { speed10M(1), speed100M(2), speed1000M(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口的速率：（1：10M，2：100M,3:1000M） " ::= { rcOptUdEthInterfaceEntry 10 } rcOptUdEthInterfaceDuplex OBJECT-TYPE SYNTAX INTEGER { full-duplex(1), half-duplex(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口双工状态:(1：全双工,2：半双工) " ::= { rcOptUdEthInterfaceEntry 11 } rcOptUdEthInterfaceMaxFrameLen OBJECT-TYPE SYNTAX INTEGER { length1916(1), length1536(2), length1632(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- 最大帧长：（1:1916字节，2：1536字节,3:1632字节） " ::= { rcOptUdEthInterfaceEntry 12 } rcOptUdEthInterfaceALS OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- 自动激光器关断：（1:enable，2：disable） " ::= { rcOptUdEthInterfaceEntry 13 } rcOptUdEthInterfaceMaxFrameLength OBJECT-TYPE SYNTAX INTEGER(64..12000) MAX-ACCESS read-write STATUS current DESCRIPTION " -- 最大帧长的字节数 " ::= { rcOptUdEthInterfaceEntry 14 } rcOptUdEthInterfaceBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " -- 端口带宽设置：使用的时隙个数 (0~32) " ::={ rcOptUdEthInterfaceEntry 15 } rcOptUdEthInterfaceBandwidthStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " -- 端口带宽状态：使用的时隙个数 (0~32) " ::={ rcOptUdEthInterfaceEntry 16 } rcOptUdEthInterfaceCheckLoopback OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- eth接口环回检测功能设置:（1：使能，2：禁止） " ::= { rcOptUdEthInterfaceEntry 17 } rcOptUdEthInterfaceCheckLoopbackStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) MAX-ACCESS read-only STATUS current DESCRIPTION " --eth接口环回检测状态: 字符串表示环回对应端口的比特位表, 比特0表示端口1 ... （1:有环回，0:无环回），可能有多个端口与本端口发生环回 每一个比特标识一个端口，每一个字节代表8个端口，最多支持128个端口相关的环回。 " ::= { rcOptUdEthInterfaceEntry 18 } rcOptUdEthInterfaceModuleType OBJECT-TYPE SYNTAX RcOptIfModuleType MAX-ACCESS read-only STATUS current DESCRIPTION " -- 光接口模块类型 " ::={ rcOptUdEthInterfaceEntry 19 } rcOptUdEthInterfaceRxBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " -- 端口接收带宽设置： -- 数值范围(1~0x061A)，带宽为本数值*64K，即带宽范围（64K~100M） 注：本对象节点目前只用于rc3000-15-(P)480fe和rc3000-15-(P)240fe " ::={ rcOptUdEthInterfaceEntry 20 } rcOptUdEthInterfaceRxBandwidthStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " -- 端口接收带宽设置状态： -- 数值范围(1~0x061A)，带宽为本数值*64K，即带宽范围（64K~100M） 注：本对象节点目前只用于rc3000-15-(P)480fe和rc3000-15-(P)240fe " ::={ rcOptUdEthInterfaceEntry 21 } rcOptUdEthInterfaceTxBandwidth OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " -- 端口发送带宽设置： -- 数值范围(1~0x061A)，带宽为本数值*64K，即带宽范围（64K~100M） 注：本对象节点目前只用于rc3000-15-(P)480fe和rc3000-15-(P)240fe " ::={ rcOptUdEthInterfaceEntry 22 } rcOptUdEthInterfaceTxBandwidthStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " -- 端口发送带宽设置状态： -- 数值范围(1~0x061A)，带宽为本数值*64K，即带宽范围（64K~100M） 注：本对象节点目前只用于rc3000-15-(P)480fe和rc3000-15-(P)240fe " ::={ rcOptUdEthInterfaceEntry 23 } rcOptUdEthInterfaceErrorStatsThreshold OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION " -- 以太网接口错误统计阈值，错误统计计数超过阈值上报告警， -- 统计计数清零告警恢复。 注：本对象节点目前只用于4EOS4FE，因为只有这个板卡可以统计到接受CRC错误报文。 该节点增加只是为了满足CNC MSAP测试，可能将来不会正式使用。 " DEFVAL { 65535 } ::={ rcOptUdEthInterfaceEntry 24 } rcOptUdEthInterfaceFaultPass OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- 故障转移功能设置 1:使能 2:禁止 " ::={ rcOptUdEthInterfaceEntry 25 } rcOptUdEthInterfaceRxBandwidthStep OBJECT-TYPE SYNTAX INTEGER { step64Kbps(1), step32Kbps(2), step80Kbps(3), step800Kbps(4), step8000Kbps(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " 接收带宽粒度: 1：64Kbps； 2：32Kbps； 3：80Kbps; 4：800Kbps; 5：8000Kbps; 其余：保留。 " ::={ rcOptUdEthInterfaceEntry 26 } rcOptUdEthInterfaceTxBandwidthStep OBJECT-TYPE SYNTAX INTEGER { step64Kbps(1), step32Kbps(2), step80Kbps(3), step800Kbps(4), step8000Kbps(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " 发送带宽粒度: 1：64Kbps； 2：32Kbps； 3：80Kbps; 4：800Kbps; 5：8000Kbps; 其余：保留。 " ::={ rcOptUdEthInterfaceEntry 27 } rcOptUdEthInterfaceTxdisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- 光口发送使能设置 1:使能 2:禁止 " ::={ rcOptUdEthInterfaceEntry 28 } rcOptUdEthInterfaceRcLinkdisable OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- RcLink使能设置 1:使能 2:禁止 " ::={ rcOptUdEthInterfaceEntry 29 } rcOptUdEthInterfacePad OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- 最小长度填充并生成FCS " DEFVAL { disable } ::= { rcOptUdEthInterfaceEntry 30 } rcOptUdEthInterfacePhymode OBJECT-TYPE SYNTAX INTEGER { serdes(1), sgmii(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " -- Phy芯片模式设置 1:serdes模式 2:sgmii模式 " ::={ rcOptUdEthInterfaceEntry 31 } -- ------------------------------------------------------------ -- 以太网接口物理层接口统计信息 -- ------------------------------------------------------------ rcOptUdEthIfStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF RcOptUdEthIfStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holding information related to the interface module status." ::= { rcOptUdEthInterfaceObjects 2 } rcOptUdEthIfStatisticEntry OBJECT-TYPE SYNTAX RcOptUdEthIfStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX {rcEntPhysicalID, ifIndex } ::= { rcOptUdEthIfStatisticTable 1 } RcOptUdEthIfStatisticEntry ::= SEQUENCE { rcOptUdEthIfStatisticInOctets Counter64, rcOptUdEthIfStatisticInUnicastPkts Integer32, rcOptUdEthIfStatisticInMulticastPkts Integer32, rcOptUdEthIfStatisticInBroadcastPkts Integer32, rcOptUdEthIfStatisticInDiscardPkts Integer32, rcOptUdEthIfStatisticInErrorPkts Integer32, rcOptUdEthIfStatisticOutOctets Counter64, rcOptUdEthIfStatisticOutUnicastPkts Integer32, rcOptUdEthIfStatisticOutMulticastPkts Integer32, rcOptUdEthIfStatisticOutBroadcastPkts Integer32, rcOptUdEthIfStatisticOutDiscardPkts Integer32, rcOptUdEthIfStatisticOutErrorPkts Integer32, rcOptUdEthIfStatisticInPkts Integer32, rcOptUdEthIfStatisticInPreambleBitErrorPkts Integer32, rcOptUdEthIfStatisticInFCSErrorPkts Integer32, rcOptUdEthIfStatisticInUndersizePkts Integer32, rcOptUdEthIfStatisticInOversizePkts Integer32, rcOptUdEthIfStatisticInPausePkts Integer32, rcOptUdEthIfStatisticInOAMPkts Integer32, rcOptUdEthIfStatisticOutPkts Integer32, rcOptUdEthIfStatisticOutFCSErrorPkts Integer32, rcOptUdEthIfStatisticOutPausePkts Integer32, rcOptUdEthIfStatisticOutOAMPkts Integer32, rcOptUdEthIfStatisticTimeStamp Integer32 } rcOptUdEthIfStatisticInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "输入有效字节数" ::={ rcOptUdEthIfStatisticEntry 1 } rcOptUdEthIfStatisticInUnicastPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输入单播包数 " ::={ rcOptUdEthIfStatisticEntry 2 } rcOptUdEthIfStatisticInMulticastPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输入多播包数 " ::={ rcOptUdEthIfStatisticEntry 3 } rcOptUdEthIfStatisticInBroadcastPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输入广播包数目 " ::={ rcOptUdEthIfStatisticEntry 4 } rcOptUdEthIfStatisticInDiscardPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输入丢弃包数目 " ::={ rcOptUdEthIfStatisticEntry 5 } rcOptUdEthIfStatisticInErrorPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输入的错误包数目 " ::={ rcOptUdEthIfStatisticEntry 6 } rcOptUdEthIfStatisticOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " 输出的有效字节数 " ::={ rcOptUdEthIfStatisticEntry 7 } rcOptUdEthIfStatisticOutUnicastPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输出单播包数目 " ::={ rcOptUdEthIfStatisticEntry 8 } rcOptUdEthIfStatisticOutMulticastPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输出多播包数目 " ::={ rcOptUdEthIfStatisticEntry 9 } rcOptUdEthIfStatisticOutBroadcastPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输出广播包数目 " ::={ rcOptUdEthIfStatisticEntry 10 } rcOptUdEthIfStatisticOutDiscardPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输出丢弃包数目 " ::={ rcOptUdEthIfStatisticEntry 11 } rcOptUdEthIfStatisticOutErrorPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 输出错误包数目 " ::={ rcOptUdEthIfStatisticEntry 12 } rcOptUdEthIfStatisticInPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网接收包统计 " ::= { rcOptUdEthIfStatisticEntry 13 } rcOptUdEthIfStatisticInPreambleBitErrorPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 前导码错误包统计 " ::= { rcOptUdEthIfStatisticEntry 14 } rcOptUdEthIfStatisticInFCSErrorPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " FCS校验错误包统计 " ::= { rcOptUdEthIfStatisticEntry 15 } rcOptUdEthIfStatisticInUndersizePkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 超短包错误统计 " ::= { rcOptUdEthIfStatisticEntry 16 } rcOptUdEthIfStatisticInOversizePkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 超长包错误统计 " ::= { rcOptUdEthIfStatisticEntry 17 } rcOptUdEthIfStatisticInPausePkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收PAUSE帧统计 " ::= { rcOptUdEthIfStatisticEntry 18 } rcOptUdEthIfStatisticInOAMPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 接收OAM帧统计 " ::= { rcOptUdEthIfStatisticEntry 19 } rcOptUdEthIfStatisticOutPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 以太网发送包统计 " ::= { rcOptUdEthIfStatisticEntry 20 } rcOptUdEthIfStatisticOutFCSErrorPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 解帧以太网FCS错误帧 " ::= { rcOptUdEthIfStatisticEntry 21 } rcOptUdEthIfStatisticOutPausePkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送PAUSE帧统计 " ::= { rcOptUdEthIfStatisticEntry 22 } rcOptUdEthIfStatisticOutOAMPkts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 发送OAM帧统计 " ::= { rcOptUdEthIfStatisticEntry 23 } rcOptUdEthIfStatisticTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " 流量统计上报时间戳 " ::= { rcOptUdEthIfStatisticEntry 24 } -- ------------------------------------------------------ -- 告警信息定义 -- ------------------------------------------------------ rcOptUdEthNotificationPrefix OBJECT IDENTIFIER ::= { rcOptUdEthNotifications 0 } rcOptUdEthTlinkDownTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth tlink down " ::= { rcOptUdEthNotificationPrefix 102701 } rcOptUdEthTlinkUpTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth tlink up. " ::= { rcOptUdEthNotificationPrefix 102702 } rcOptUdEthRlinkDownTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth rlink down " ::= { rcOptUdEthNotificationPrefix 102703 } rcOptUdEthRlinkUpTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth rlink up. " ::= { rcOptUdEthNotificationPrefix 102704 } rcOptUdEthEnergyNotDetectedTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth energy not detected. " ::= { rcOptUdEthNotificationPrefix 102705 } rcOptUdEthEnergyDetectedTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth energy detected. " ::= { rcOptUdEthNotificationPrefix 102706 } rcOptUdEthlinkDownTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth FE link down.仅远端设备发送 " ::= { rcOptUdEthNotificationPrefix 102707 } rcOptUdEthlinkUpTrap NOTIFICATION-TYPE OBJECTS { rcNotifsTrapLocation, rcEntPhysicalID, ifIndex } STATUS current DESCRIPTION " Eth FE link up.仅远端设备发送 " ::= { rcOptUdEthNotificationPrefix 102708 } END