-- ***************************************************************** -- raisecom-aps-mib.mib: Raisecom APS MIB file -- -- 6 2011, zhangfeng -- -- Copyright (c) 1994-2009, 2009 by Raisecom, Inc. -- All rights reserved. -- -- ***************************************************************** RAISECOM-APS-MIB DEFINITIONS ::= BEGIN IMPORTS raisecomAgent FROM RAISECOM-BASE-MIB MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Gauge32, NOTIFICATION-TYPE FROM SNMPv2-SMI -- RFC2578 RowStatus,TruthValue FROM SNMPv2-TC -- RFC2579 EnableVar,Vlanset FROM SWITCH-TC; raisecomAps MODULE-IDENTITY LAST-UPDATED "201106020000Z" ORGANIZATION "Raisecom, Inc." CONTACT-INFO " Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: zhangfeng_rj2@raisecom.com" DESCRIPTION "description of aps module managed object." ::= { raisecomAgent 37} raisecomApsBaseGroup OBJECT IDENTIFIER ::= { raisecomAps 1 } raisecomApsAssociationGroup OBJECT IDENTIFIER ::= { raisecomAps 2 } raisecomApsFailureDetGroup OBJECT IDENTIFIER ::= { raisecomAps 3 } raisecomApsNotifications OBJECT IDENTIFIER ::= { raisecomAps 4 } --------------------- raisecomApsBaseGroup-------------------------- -------------------------------------------------------------------- ----------------------raisecomApsTrapEnable------------------------- raisecomApsTrapEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether traps for aps should be generated or not." DEFVAL { disable } ::= { raisecomApsBaseGroup 1 } --------------------- raisecomApsCfgTable--------------------------- raisecomApsCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomApsCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of aps configuration and associated properties." ::= { raisecomApsBaseGroup 2} raisecomApsCfgEntry OBJECT-TYPE SYNTAX RaisecomApsCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for aps configuration and associated properties." INDEX { raisecomApsId } ::= { raisecomApsCfgTable 1 } RaisecomApsCfgEntry ::= SEQUENCE { raisecomApsId Unsigned32, raisecomApsName OCTET STRING(SIZE (1..32)), raisecomApsType INTEGER, raisecomApsWorkingPort Integer32, raisecomApsWorkingBlockVlanlist Vlanset, raisecomApsProtectionPort Integer32, raisecomApsProtectionBlockVlanlist Vlanset, raisecomApsWorkingIngressAssociation OCTET STRING(SIZE (1..32)), raisecomApsWorkingEgressAssociation OCTET STRING(SIZE (1..32)), raisecomApsProtectionIngressAssociation OCTET STRING(SIZE (1..32)), raisecomApsProtectionEgressAssociation OCTET STRING(SIZE (1..32)), raisecomApsProtectionTypeAdmin Unsigned32, raisecomApsProtectionTypeOper Unsigned32, raisecomApsForceSwitch TruthValue, raisecomApsManualSwitch TruthValue, raisecomApsManualSwitchtoWork TruthValue, raisecomApsLockout TruthValue, raisecomApsClear TruthValue, raisecomApsWtrTimer Unsigned32, raisecomApsHoldOffTimer Unsigned32, raisecomApsProtocolVlan INTEGER, raisecomApsStatus INTEGER, raisecomApsDfopStatus INTEGER, raisecomApsRowStatus RowStatus } raisecomApsId OBJECT-TYPE SYNTAX Unsigned32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index uniquely identifies a aps. This value can't be modified after created." ::= { raisecomApsCfgEntry 1 } raisecomApsName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name for the associtaed APS." DEFVAL { 1 } ::= { raisecomApsCfgEntry 2 } raisecomApsType OBJECT-TYPE SYNTAX INTEGER{ ether-aps(1), mpls-aps(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The configured aps type. APS has two types, one for ehternet aps, and the other for mpls aps." ::= { raisecomApsCfgEntry 3 } raisecomApsWorkingPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The port of working transport entity. This oid is used for ethernet aps only." ::= { raisecomApsCfgEntry 4 } raisecomApsWorkingBlockVlanlist OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-create STATUS current DESCRIPTION "The block Vlan list for working entity. This oid is used for ethernet aps only." ::= { raisecomApsCfgEntry 5 } raisecomApsProtectionPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The port of protection.transport entity. This oid is used for ethernet aps only." ::= { raisecomApsCfgEntry 6 } raisecomApsProtectionBlockVlanlist OBJECT-TYPE SYNTAX Vlanset MAX-ACCESS read-create STATUS current DESCRIPTION "The block Vlan list for protection entity. This oid is used for ethernet aps only." ::= { raisecomApsCfgEntry 7 } raisecomApsWorkingIngressAssociation OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The aps association name of working transport entity in the ingress direction. This oid is used for mpls aps only." ::= { raisecomApsCfgEntry 8 } raisecomApsWorkingEgressAssociation OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The aps association name of working transport entity in the egress direction. This oid is used for mpls aps only." ::= { raisecomApsCfgEntry 9 } raisecomApsProtectionIngressAssociation OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The aps association name of protection transport entity in the ingress direction. This oid is used for mpls aps only." ::= { raisecomApsCfgEntry 10 } raisecomApsProtectionEgressAssociation OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The aps association name of protection transport entity in the egress direction. This oid is used for mpls aps only." ::= { raisecomApsCfgEntry 11 } raisecomApsProtectionTypeAdmin OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "The protection type configured locally." DEFVAL{ 15 } ::= { raisecomApsCfgEntry 12 } raisecomApsProtectionTypeOper OBJECT-TYPE SYNTAX Unsigned32 (0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The protection type coordinated with the far end." ::= { raisecomApsCfgEntry 13} raisecomApsForceSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Forces normal traffic signal to be selected from the protection transport entity." DEFVAL{ false } ::= { raisecomApsCfgEntry 14} raisecomApsManualSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "In the absence of a failure of a working or protection transport entity, forces normal traffic signal to be selected from the protection transport entity." DEFVAL{ false } ::= { raisecomApsCfgEntry 15 } raisecomApsManualSwitchtoWork OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "In the absence of a failure of a working or protection transport entity, forces normal traffic signal to be selected from the working transport entity." DEFVAL{ false } ::= { raisecomApsCfgEntry 16 } raisecomApsLockout OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This command prevents a working signal from being selected from the protection transport entity. This effectively disables the protection group." DEFVAL{ false } ::= { raisecomApsCfgEntry 17 } raisecomApsClear OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-create STATUS current DESCRIPTION "Clears the active near end Lockout of Protection, Forced Switch, Manual Switch, or WTR state." DEFVAL{ disable } ::= { raisecomApsCfgEntry 18 } raisecomApsWtrTimer OBJECT-TYPE SYNTAX Unsigned32 (1..12) MAX-ACCESS read-create STATUS current DESCRIPTION "In revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become fault-free. After the failed working transport entity meets this criterion, a fixed period of time shall elapse before a normal traffic signal uses it again. This period, called wait-to-restore (WTR) period, may be configured by the operator in 1 minute steps between 1 and 12 minutes; the default value is 5 minutes." DEFVAL { 5 } ::= { raisecomApsCfgEntry 19 } raisecomApsHoldOffTimer OBJECT-TYPE SYNTAX Unsigned32(0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "When a new defect or more severe defect occurs (new SF), this event will not be reported immediately to protection switching if the provisioned holdoff timer value is non-zero. Instead, the holdoff timer will be started. When the holdoff timer expires, whether a defect still exists on the trail that started the timer will be checked. If one does exist, that defect will be reported to protection switching. Each protection group should have a provisionable holdoff timer. The suggested range of the holdoff timer is 0 to 10 seconds in steps of 100 ms with an accuracy of ¡À5 ms." DEFVAL { 0 } ::= { raisecomApsCfgEntry 20 } raisecomApsProtocolVlan OBJECT-TYPE SYNTAX INTEGER(1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Protocol vlan for APS packet encapsulation. This oid is used for ethernet aps only" DEFVAL { 1 } ::= { raisecomApsCfgEntry 21 } raisecomApsStatus OBJECT-TYPE SYNTAX INTEGER{ nr-w(1), nr-p(2), lo(3), fs(4), sf-w(5), sf-p(6), ms(7), ms-w(8), wtr(9), dnr(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Aps status.The default state is No Request (Working/Active Protection/Standby)." DEFVAL { 1 } ::= { raisecomApsCfgEntry 22 } raisecomApsDfopStatus OBJECT-TYPE SYNTAX INTEGER{ normal(1), dFOP-CM(2), dFOP-PM(3), dFOP-NR(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "DFOP status.When the APS protocol is running regularly, the status in normal.If failure of protocol is detected, the status is dFOP-CM,dFOP-PM or dFOP-NR according to the cause of dFOP.The default state is normal." DEFVAL { 1 } ::= { raisecomApsCfgEntry 23 } raisecomApsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation." ::= { raisecomApsCfgEntry 24 } -------------------- aps Statistics Table ------------------------------- raisecomApsStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomApsStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics Table of Aps Linear Protection Switching." ::= { raisecomApsBaseGroup 3} raisecomApsStatisticsEntry OBJECT-TYPE SYNTAX RaisecomApsStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for aps statistics information." INDEX { raisecomApsId } ::= { raisecomApsStatisticsTable 1 } RaisecomApsStatisticsEntry ::= SEQUENCE { raisecomApsStatisticsSwitchCounts Unsigned32, raisecomApsStatisticsApsTx Unsigned32, raisecomApsStatisticsApsRx Unsigned32, raisecomApsStatisticsLastStatusOccur TimeTicks, raisecomApsStatisticsLastSwitchOccur TimeTicks, raisecomApsStatisticsLastDfop TimeTicks, raisecomApsStatisticsClear EnableVar } raisecomApsStatisticsSwitchCounts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts of switching from working transport entity to protection transport entity or from protection transport entity to working transport entity." DEFVAL { 0 } ::= { raisecomApsStatisticsEntry 1 } raisecomApsStatisticsApsTx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "APS packet number sent to the far end." DEFVAL { 0 } ::= { raisecomApsStatisticsEntry 2 } raisecomApsStatisticsApsRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "APS packet number received from the far end." DEFVAL { 0 } ::= { raisecomApsStatisticsEntry 3 } raisecomApsStatisticsLastStatusOccur OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time when last status changes." ::= { raisecomApsStatisticsEntry 4 } raisecomApsStatisticsLastSwitchOccur OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time when last linear protection switching happens." ::= { raisecomApsStatisticsEntry 5 } raisecomApsStatisticsLastDfop OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Time when last dFOP happens." ::= { raisecomApsStatisticsEntry 6 } raisecomApsStatisticsClear OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "Clear statistics information of linear protection." DEFVAL { disable } ::= { raisecomApsStatisticsEntry 7 } -------------------- aps Peer Table ------------------------------- raisecomApsPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomApsPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "aps information of the far end." ::= { raisecomApsBaseGroup 4} raisecomApsPeerEntry OBJECT-TYPE SYNTAX RaisecomApsPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for aps information of the far end." INDEX { raisecomApsId } ::= { raisecomApsPeerTable 1 } RaisecomApsPeerEntry ::= SEQUENCE { raisecomApsPeerProtectionType Unsigned32, raisecomApsPeerStatus INTEGER, raisecomApsRequestSignal INTEGER, raisecomApsBridgedSignal INTEGER } raisecomApsPeerProtectionType OBJECT-TYPE SYNTAX Unsigned32(0..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The protection type of the far end." ::= { raisecomApsPeerEntry 1 } raisecomApsPeerStatus OBJECT-TYPE SYNTAX INTEGER{ nr-w(1), nr-p(2), lo(3), fs(4), sf-w(5), sf-p(6), ms(7), ms-w(8), wtr(9), dnr(10), sd(11), exer(12), rr(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "Aps status of the far end.The default state is No Request (Working/Active Protection/Standby)." DEFVAL { 1 } ::= { raisecomApsPeerEntry 2 } raisecomApsRequestSignal OBJECT-TYPE SYNTAX INTEGER{ null(0), normal-traffic-signal(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Request Signal from received APS packet." ::= { raisecomApsPeerEntry 3 } raisecomApsBridgedSignal OBJECT-TYPE SYNTAX INTEGER{ null(0), normal-traffic-signal(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Bridged Signal from received APS packet." ::= { raisecomApsPeerEntry 4 } --------------------raisecomApsAssociationGroup------------------------------ ----------------------------------------------------------------------------- --------------------raisecomApsAssociationTable------------------------------ raisecomApsAssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomApsAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of aps association configure information. This table is used for mpls aps only." ::= { raisecomApsAssociationGroup 1} raisecomApsAssociationEntry OBJECT-TYPE SYNTAX RaisecomApsAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for aps association configure information." INDEX { raisecomApsAssociationName } ::= { raisecomApsAssociationTable 1 } RaisecomApsAssociationEntry ::= SEQUENCE { raisecomApsAssociationName OCTET STRING(SIZE (1..32)), raisecomApsAssociationMdName OCTET STRING(SIZE (1..16)), raisecomApsAssociationMdLevel Integer32, raisecomApsAssociationMaName OCTET STRING(SIZE (1..13)), raisecomApsAssociationRowStatus RowStatus } raisecomApsAssociationName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of aps association." ::= { raisecomApsAssociationEntry 1 } raisecomApsAssociationMdName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain." ::= { raisecomApsAssociationEntry 2 } raisecomApsAssociationMdLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Maintenance Domain Level." ::= { raisecomApsAssociationEntry 3 } raisecomApsAssociationMaName OBJECT-TYPE SYNTAX OCTET STRING(SIZE (1..13)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name must be unique within a maintenance domain." ::= { raisecomApsAssociationEntry 4 } raisecomApsAssociationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is responsible for managing the creation, detection and modification of rows, which support active status and CreatAndGo, destroy operation." ::= { raisecomApsAssociationEntry 5 } --------------------- raisecomApsFailureDetGroup------------------------- ------------------------------------------------------------------------- ---------------------raisecomApsFailureDetTable-------------------------- raisecomApsFailureDetTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomApsFailureDetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of aps link failure detecton configuration. This table is used for ethernet aps only." ::= { raisecomApsFailureDetGroup 1} raisecomApsFailureDetEntry OBJECT-TYPE SYNTAX RaisecomApsFailureDetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for aps link failure detecton configuration." INDEX { raisecomApsId, raisecomApsFdLink } ::= { raisecomApsFailureDetTable 1 } RaisecomApsFailureDetEntry ::= SEQUENCE { raisecomApsFdLink INTEGER, raisecomApsFdType INTEGER, raisecomApsFdLinkStatus INTEGER, raisecomApsFdSfType INTEGER, raisecomApsFdMdName OCTET STRING, raisecomApsFdMaName OCTET STRING, raisecomApsFdLocalMep INTEGER, raisecomApsFdRemoteMep INTEGER, raisecomApsMdLevel Integer32 } raisecomApsFdLink OBJECT-TYPE SYNTAX INTEGER{ working(1), protection(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Linear protection link type, identifies if the link is working entity or protection entity." ::= { raisecomApsFailureDetEntry 1 } raisecomApsFdType OBJECT-TYPE SYNTAX INTEGER{ physical-link(1), cc(2), both(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The failure detection type for the link." DEFVAL { 1 } ::= { raisecomApsFailureDetEntry 2 } raisecomApsFdLinkStatus OBJECT-TYPE SYNTAX INTEGER{ ok(1), sf(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The link status." ::= { raisecomApsFailureDetEntry 3 } raisecomApsFdSfType OBJECT-TYPE SYNTAX INTEGER{ none(1), physical-link(2), cc(3), both(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The failure detect types which have triggered SF." ::= { raisecomApsFailureDetEntry 4 } raisecomApsFdMdName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain." ::= { raisecomApsFailureDetEntry 5 } raisecomApsFdMaName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..13)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name must be unique within a maintenance domain." ::= { raisecomApsFailureDetEntry 6 } raisecomApsFdLocalMep OBJECT-TYPE SYNTAX INTEGER(1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Local MEPId of working or protection entity, identifying a specific MEP." ::= { raisecomApsFailureDetEntry 7 } raisecomApsFdRemoteMep OBJECT-TYPE SYNTAX INTEGER(1..8191) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote MEPId of working or protection entity, identifying a specific MEP." ::= { raisecomApsFailureDetEntry 8 } raisecomApsMdLevel OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The Maintenance Domain Level." ::= { raisecomApsFailureDetEntry 9 } -------------------- Notification Definition section ------------------------ raisecomApsDfopTrap NOTIFICATION-TYPE OBJECTS { raisecomApsStatisticsLastDfop } STATUS current DESCRIPTION "When dFOP happens." ::= { raisecomApsNotifications 1 } raisecomApsDfopClearTrap NOTIFICATION-TYPE OBJECTS { raisecomApsStatisticsLastDfop } STATUS current DESCRIPTION "Comes to a new status from dFOP." ::= { raisecomApsNotifications 2 } raisecomApsSwitchTrap NOTIFICATION-TYPE OBJECTS { raisecomApsStatus } STATUS current DESCRIPTION "Linear protection switching happens." ::= { raisecomApsNotifications 3 } END