-- MibName=raisecomAcl -- ***************************************************************** -- RAISECOM-ACL-MIB.MIB: Raisecom Acl MIB file -- -- Sep 2004, liguanfeng -- -- Copyright (c) 1994-2004, 2001 by Raisecom, Inc. -- All rights reserved. -- -- 01,20110519,huochao,add four mib object(tunnel/vc label and exp) in the user acl tabel. -- ***************************************************************** RAISECOM-ACL-MIB DEFINITIONS ::= BEGIN IMPORTS raisecomAgent FROM RAISECOM-BASE-MIB MacAddress FROM SNMPv2-TC RowStatus FROM SNMPv2-TC Ipv6Address FROM IPV6-TC Gauge32 FROM SNMPv2-SMI; raisecomAcl MODULE-IDENTITY LAST-UPDATED "200409140000Z" ORGANIZATION "Raisecom, Inc." CONTACT-INFO " Raise Systems Postal: Beijing, China Tel: 86-010-82884499 E-mail: support@raisecom.com" DESCRIPTION "Modified description of access list object." ::= { raisecomAgent 3 } -- -------------------------------------------------------------------------- -- -- define groups in RAISECOM-ACCESSLIST-MIB -- -------------------------------------------------------------------------- -- raisecomIpAccessList OBJECT IDENTIFIER ::= { raisecomAcl 1 } raisecomMacAccessList OBJECT IDENTIFIER ::= { raisecomAcl 2 } raisecomUserAccessList OBJECT IDENTIFIER ::= { raisecomAcl 3 } raisecomIpv6AccessList OBJECT IDENTIFIER ::= { raisecomAcl 4 } -- -------------------------------------------------------------------------- -- -- The ip access control list -- The ip access control list contains some rules that are -- associated with ip address, and will be bound to the ports -- or vlans on device. raisecomIpAclTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomIpAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ip access list and associated properties.." ::= { raisecomIpAccessList 1} raisecomIpAclEntry OBJECT-TYPE SYNTAX RaisecomIpAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for ip access list and status information." INDEX { raisecomIpAclNumber } ::= { raisecomIpAclTable 1 } RaisecomIpAclEntry ::= SEQUENCE { raisecomIpAclNumber INTEGER (0..999), raisecomIpAclAccessType INTEGER, raisecomIpAclProtocol INTEGER, raisecomIpAclSourceAddress IpAddress, raisecomIpAclSourceMask IpAddress, raisecomIpAclSourceProtocolPort INTEGER (0..65535), raisecomIpAclDestinationAddress IpAddress, raisecomIpAclDestinationMask IpAddress, raisecomIpAclDestinationProtocolPort INTEGER (0..65535), raisecomIpAclRef Gauge32, raisecomIpAclStatus RowStatus, raisecomIpAclSetFlag Unsigned32 } raisecomIpAclNumber OBJECT-TYPE SYNTAX INTEGER (0..999) ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the ip access list table." ::= { raisecomIpAclEntry 1 } raisecomIpAclAccessType OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-create STATUS current DESCRIPTION "The access type of this entry, permit or deny." ::= { raisecomIpAclEntry 2 } raisecomIpAclProtocol OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-create STATUS current DESCRIPTION "The protocol of an IP protocol. To match any Internet protocol, use the ip(0); so and so,tcp(6) udp(17),icmp(1),igmp(2)." ::= { raisecomIpAclEntry 3 } raisecomIpAclSourceAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The source ip address in the IP protocol." ::= { raisecomIpAclEntry 4 } raisecomIpAclSourceMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The address mask of the source ip address." ::= { raisecomIpAclEntry 5 } raisecomIpAclSourceProtocolPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-create STATUS current DESCRIPTION "The source protocol port in the tcp or udp protocol." ::= { raisecomIpAclEntry 6 } raisecomIpAclDestinationAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The destination ip address in the IP protocol." ::= { raisecomIpAclEntry 7 } raisecomIpAclDestinationMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The address mask of the destination ip address." ::= { raisecomIpAclEntry 8 } raisecomIpAclDestinationProtocolPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-create STATUS current DESCRIPTION "The destination protocol port in the tcp or udp protocol" ::= { raisecomIpAclEntry 9 } raisecomIpAclRef OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "The value descrides how many the lists are using." ::= { raisecomIpAclEntry 10 } raisecomIpAclStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { raisecomIpAclEntry 11 } raisecomIpAclSetFlag OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-create STATUS current DESCRIPTION "The flag that marks which rule is setted, one bit represents one rule." ::= { raisecomIpAclEntry 12 } -- The mac access control list-- -- The mac access control list contains some rules that are -- associated with ethernet address, and will be bound to the -- ports or vlans on device. raisecomMacAclTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomMacAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of mac access list and associated properties.." ::= { raisecomMacAccessList 1 } raisecomMacAclEntry OBJECT-TYPE SYNTAX RaisecomMacAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for mac access list and status information." INDEX { raisecomMacAclNumber } ::= { raisecomMacAclTable 1 } RaisecomMacAclEntry ::= SEQUENCE { raisecomMacAclNumber INTEGER (0..999), raisecomMacAclAccessType INTEGER, raisecomMacAclProtocol INTEGER, raisecomMacAclSourceAddress MacAddress, raisecomMacAclSourceMask MacAddress, raisecomMacAclDestinationAddress MacAddress, raisecomMacAclDestinationMask MacAddress, raisecomMacAclRef Gauge32, raisecomMacAclStatus RowStatus, raisecomMacAclSetFlag Unsigned32 } raisecomMacAclNumber OBJECT-TYPE SYNTAX INTEGER (0..999) ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the mac access list table." ::= { raisecomMacAclEntry 1 } raisecomMacAclAccessType OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-create STATUS current DESCRIPTION "The access type of this access list, permit or deny." ::= { raisecomMacAclEntry 2 } raisecomMacAclProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-create STATUS current DESCRIPTION "The type of protocol that contained in the ethernet frame. The value all(0) is used to all protocols." ::= { raisecomMacAclEntry 3 } raisecomMacAclSourceAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of the source MAC address." ::= { raisecomMacAclEntry 4 } raisecomMacAclSourceMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of the source MAC address mask." ::= { raisecomMacAclEntry 5 } raisecomMacAclDestinationAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of the destination MAC address." ::= { raisecomMacAclEntry 6 } raisecomMacAclDestinationMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of the destination MAC address mask." ::= { raisecomMacAclEntry 7 } raisecomMacAclRef OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "The value descrides how many the lists are using." ::= { raisecomMacAclEntry 8 } raisecomMacAclStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { raisecomMacAclEntry 9 } raisecomMacAclSetFlag OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-create STATUS current DESCRIPTION "The flag that marks which rule is setted, one bit represents one rule." ::= { raisecomMacAclEntry 10 } -- The user access control list -- The user access control list contains some rules that are defined -- by network administrator according to practical application. -- Generally these rules are set based on the first 80 bytes of -- the ethernet frame. raisecomUserAclTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomUserAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of user access control list entries." ::= { raisecomUserAccessList 1} raisecomUserAclEntry OBJECT-TYPE SYNTAX RaisecomUserAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of parameters that set up a rule about the user access control list." INDEX { raisecomUserAclNumber } ::= { raisecomUserAclTable 1 } RaisecomUserAclEntry ::= SEQUENCE { raisecomUserAclNumber INTEGER (0..999), raisecomUserAclAccessType INTEGER, raisecomUserAclRuleString OCTET STRING (SIZE(1..64)), raisecomUserAclRuleMask OCTET STRING (SIZE(1..64)), raisecomUserAclOffset INTEGER (0..63), raisecomUserAclRef Gauge32, raisecomUserAclStatus RowStatus, raisecomUserAclSourceMacAddress MacAddress, raisecomUserAclDestinationMacAddress MacAddress, raisecomUserAclEtherType INTEGER, raisecomUserAclEtherTypeMask INTEGER, raisecomUserAclSourceIpAddress IpAddress, raisecomUserAclSourceIpMask IpAddress, raisecomUserAclDestinationIpAddress IpAddress, raisecomUserAclDestinationIpMask IpAddress, raisecomUserAclIpPrecedence INTEGER (0..7), raisecomUserAclIpTos INTEGER (0..15), raisecomUserAclIpDscp INTEGER (0..63), raisecomUserAclIpFragmentsFlag INTEGER (0..1), raisecomUserAclIpProtocol INTEGER (0..255), raisecomUserAclSourceProtocolPort INTEGER, raisecomUserAclDestinationProtocolPort INTEGER, raisecomUserAclTcpProtocolFlag INTEGER (0..63), raisecomUserAclCvlanCos INTEGER (0..7), raisecomUserAclSvlanCos INTEGER (0..7), raisecomUserAclCvlan INTEGER (1..4094), raisecomUserAclSvlan INTEGER (1..4094), raisecomUserAclSetFlag Unsigned32, raisecomUserAclSourceMacMask MacAddress, raisecomUserAclDestinationMacMask MacAddress, raisecomUserAclCos INTEGER (0..7), raisecomUserAclArpType INTEGER, raisecomUserAclArpSenderMac MacAddress, raisecomUserAclArpTargetMac MacAddress, raisecomUserAclIcmpIgmpType INTEGER (0..255), raisecomUserAclIcmpCode INTEGER (0..255), raisecomUserAclIpv6SourceAddress Ipv6Address, raisecomUserAclIpv6SourceMask Ipv6Address, raisecomUserAclIpv6DestinationAddress Ipv6Address, raisecomUserAclIpv6DestinationMask Ipv6Address, raisecomUserAclIpv6SourceMaskLen INTEGER, raisecomUserAclIpv6DestinationMaskLen INTEGER, raisecomUserAclIpv6Protocol INTEGER (0..255), raisecomUserAclIpv6FlowLabel INTEGER, raisecomUserAclIpv6TrafficClass INTEGER (0..255), raisecomUserAclIcmpv6Type INTEGER, raisecomUserAclUserLen INTEGER, raisecomUserAclExtensionSetFlag OCTET STRING (SIZE (16)), raisecomUserAclTunnelLabel INTEGER, raisecomUserAclTunnelExp INTEGER, raisecomUserAclVcLabel INTEGER, raisecomUserAclVcExp INTEGER } raisecomUserAclNumber OBJECT-TYPE SYNTAX INTEGER (0..999) ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the user access list table." ::= { raisecomUserAclEntry 1 } raisecomUserAclAccessType OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-create STATUS current DESCRIPTION "The access type of this access list, permit or deny." ::= { raisecomUserAclEntry 2 } raisecomUserAclRuleString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) ACCESS read-create STATUS current DESCRIPTION "The value used to judge whether match the ethernet frame." ::= { raisecomUserAclEntry 3 } raisecomUserAclRuleMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) ACCESS read-create STATUS current DESCRIPTION "The bitmap that used to AND with the ethernet frame in order to mask out the matching value." ::= { raisecomUserAclEntry 4 } raisecomUserAclOffset OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-create STATUS current DESCRIPTION "The offset in the ethernet frame on which the raisecomUserAclRuleString locates. It is based on 0 at the start of the ethernet frame." ::= { raisecomUserAclEntry 5 } raisecomUserAclRef OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "The value specifies how many the lists are using." ::= { raisecomUserAclEntry 6 } raisecomUserAclStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { raisecomUserAclEntry 7 } raisecomUserAclSourceMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of the source MAC address." ::= { raisecomUserAclEntry 8 } raisecomUserAclDestinationMacAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of the destination MAC address." ::= { raisecomUserAclEntry 9 } raisecomUserAclEtherType OBJECT-TYPE SYNTAX INTEGER ACCESS read-create STATUS current DESCRIPTION "The type of protocol that contained in the Ethernet frame." ::= { raisecomUserAclEntry 10 } raisecomUserAclEtherTypeMask OBJECT-TYPE SYNTAX INTEGER ACCESS read-create STATUS current DESCRIPTION "The mask of the Ethernet typeŁ¬the value 0 for invalid Ethernet typeŁ¬and it is optional." ::= { raisecomUserAclEntry 11 } raisecomUserAclSourceIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The source IP address in the IP protocol." ::= { raisecomUserAclEntry 12 } raisecomUserAclSourceIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The address mask of the source IP address, it is optional." ::= { raisecomUserAclEntry 13 } raisecomUserAclDestinationIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The destination IP address in the IP protocol." ::= { raisecomUserAclEntry 14 } raisecomUserAclDestinationIpMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-create STATUS current DESCRIPTION "The address mask of the destination IP address, it is optional." ::= { raisecomUserAclEntry 15 } raisecomUserAclIpPrecedence OBJECT-TYPE SYNTAX INTEGER { routine(0), priority(1), immediate(2), flash(3), flash-override(4), critical(5), internet(6), network(7) } ACCESS read-create STATUS current DESCRIPTION "The value of the IP precedence in the IP protocol. It conflicts with the Tos and Dscp when setting." ::= { raisecomUserAclEntry 16 } raisecomUserAclIpTos OBJECT-TYPE SYNTAX INTEGER (0..15) ACCESS read-create STATUS current DESCRIPTION "The value of the TOS in the IP protocol. It conflicts with the Precedence and Dscp when setting." ::= { raisecomUserAclEntry 17 } raisecomUserAclIpDscp OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-create STATUS current DESCRIPTION "The value of the DSCP in the IP protocol. It conflicts with the Precedence and Tos when setting." ::= { raisecomUserAclEntry 18 } raisecomUserAclIpFragmentsFlag OBJECT-TYPE SYNTAX INTEGER { nofragments(0), fragments(1) } ACCESS read-create STATUS current DESCRIPTION "The flag that marks whether there are another IP fragments.." ::= { raisecomUserAclEntry 19 } raisecomUserAclIpProtocol OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-create STATUS current DESCRIPTION "The protocol type in the IP protocol.To match any Internet protocol, use the ip(0)." ::= { raisecomUserAclEntry 20 } raisecomUserAclSourceProtocolPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-create STATUS current DESCRIPTION "The source protocol port in the TCP or UDP protocol." ::= { raisecomUserAclEntry 21 } raisecomUserAclDestinationProtocolPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-create STATUS current DESCRIPTION "The destination protocol port in the TCP or UDP protocol." ::= { raisecomUserAclEntry 22 } raisecomUserAclTcpProtocolFlag OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-create STATUS current DESCRIPTION "The flags in the TCP protocol." ::= { raisecomUserAclEntry 23 } raisecomUserAclCvlanCos OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-create STATUS current DESCRIPTION "The value of the COS in the inner vlan(cvlan)." ::= { raisecomUserAclEntry 24 } raisecomUserAclSvlanCos OBJECT-TYPE SYNTAX INTEGER (0..7) ACCESS read-create STATUS current DESCRIPTION "The value of the COS in the outer vlan (svlan)" ::= { raisecomUserAclEntry 25 } raisecomUserAclCvlan OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-create STATUS current DESCRIPTION "The ID of the inner vlan (cvlan)." ::= { raisecomUserAclEntry 26} raisecomUserAclSvlan OBJECT-TYPE SYNTAX INTEGER (1..4094) ACCESS read-create STATUS current DESCRIPTION "The ID of the outer vlan (svlan)." ::= { raisecomUserAclEntry 27 } raisecomUserAclSetFlag OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-create STATUS current DESCRIPTION "The flag that marks which rule is setted, one bit represents one rule.." ::= { raisecomUserAclEntry 28 } raisecomUserAclSourceMacMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of user Acl Source MAC address Mask." ::= { raisecomUserAclEntry 29 } raisecomUserAclDestinationMacMask OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of user Acl Destination MAC address Mask." ::= { raisecomUserAclEntry 30 } raisecomUserAclCos OBJECT-TYPE SYNTAX INTEGER(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The user acl cos." ::= { raisecomUserAclEntry 31} raisecomUserAclArpType OBJECT-TYPE SYNTAX INTEGER {request(1), reply(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "The user acl arp type" ::= { raisecomUserAclEntry 32} raisecomUserAclArpSenderMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of user Acl arp sender MAC address." ::= { raisecomUserAclEntry 33 } raisecomUserAclArpTargetMac OBJECT-TYPE SYNTAX MacAddress ACCESS read-create STATUS current DESCRIPTION "The value of user Acl arp target MAC address." ::= { raisecomUserAclEntry 34 } raisecomUserAclIcmpIgmpType OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The user acl Icmp Igmp type." ::= { raisecomUserAclEntry 35} raisecomUserAclIcmpCode OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The user acl Icmp Code." ::= { raisecomUserAclEntry 36} raisecomUserAclIpv6SourceAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6SourceAddress." ::= { raisecomUserAclEntry 37} raisecomUserAclIpv6SourceMask OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6SourceMask." ::= { raisecomUserAclEntry 38} raisecomUserAclIpv6DestinationAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6DestinationAddress." ::= { raisecomUserAclEntry 39} raisecomUserAclIpv6DestinationMask OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6 Destination Mask." ::= { raisecomUserAclEntry 40} raisecomUserAclIpv6SourceMaskLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The len of user acl Ipv6SourceMask." ::= { raisecomUserAclEntry 41} raisecomUserAclIpv6DestinationMaskLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6 Destination Mask." ::= { raisecomUserAclEntry 42} raisecomUserAclIpv6Protocol OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6 Protocol." ::= { raisecomUserAclEntry 43} raisecomUserAclIpv6FlowLabel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6 FlowLabel." ::= { raisecomUserAclEntry 44} raisecomUserAclIpv6TrafficClass OBJECT-TYPE SYNTAX INTEGER {mld-query(130), mld-report(131), mld-done(132)} MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Ipv6 TrafficClass." ::= { raisecomUserAclEntry 45} raisecomUserAclIcmpv6Type OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of user acl Icmpv6 Type." ::= { raisecomUserAclEntry 46} raisecomUserAclUserLen OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The len of user acl uer length." ::= { raisecomUserAclEntry 47} raisecomUserAclExtensionSetFlag OBJECT-TYPE SYNTAX OCTET STRING (SIZE (16)) ACCESS read-create STATUS current DESCRIPTION "The extension flag that marks which rule is setted, one bit represents one rule. Once the main flag raisecomUserAclSetFlag is setted 0x40000000,the extension flag is used." ::= { raisecomUserAclEntry 48 } raisecomUserAclTunnelLabel OBJECT-TYPE SYNTAX INTEGER(16..1048575) ACCESS read-create STATUS current DESCRIPTION "The tunnel label value." ::= { raisecomUserAclEntry 49 } raisecomUserAclTunnelExp OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-create STATUS current DESCRIPTION "The tunnel label exp value." ::= { raisecomUserAclEntry 50 } raisecomUserAclVcLabel OBJECT-TYPE SYNTAX INTEGER(16..1048575) ACCESS read-create STATUS current DESCRIPTION "The vc label value." ::= { raisecomUserAclEntry 51 } raisecomUserAclVcExp OBJECT-TYPE SYNTAX INTEGER(0..7) ACCESS read-create STATUS current DESCRIPTION "The vc label exp value." ::= { raisecomUserAclEntry 52 } --The ipv6 access control list-- raisecomIpv6AclTable OBJECT-TYPE SYNTAX SEQUENCE OF RaisecomIpv6AclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ipv6 access list and associated properties." ::= { raisecomIpv6AccessList 1} raisecomIpv6AclEntry OBJECT-TYPE SYNTAX RaisecomIpv6AclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for ipv6 access list and status information." INDEX { raisecomIpv6AclNumber } ::= { raisecomIpv6AclTable 1 } RaisecomIpv6AclEntry ::= SEQUENCE { raisecomIpv6AclNumber INTEGER (0..999), raisecomIpv6AclAccessType INTEGER, raisecomIpv6AclProtocol INTEGER, raisecomIpv6AclSourceAddress Ipv6Address, raisecomIpv6AclSourcePrefixLen INTEGER(0..128), raisecomIpv6AclDestinationAddress Ipv6Address, raisecomIpv6AclDestinationPrefixLen INTEGER(0..128), raisecomIpv6AclTrafficClass INTEGER, raisecomIpv6AclFlowLabel INTEGER(0..1048575), raisecomIpv6AclRef Gauge32, raisecomIpv6AclStatus RowStatus, raisecomIpv6AclSourceProtocolPort INTEGER (0..65535), raisecomIpv6AclDestinationProtocolPort INTEGER (0..65535), raisecomIpv6AclSetFlag Unsigned32 } raisecomIpv6AclNumber OBJECT-TYPE SYNTAX INTEGER (0..999) ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies an entry in the ipv6 access list table." ::= { raisecomIpv6AclEntry 1 } raisecomIpv6AclAccessType OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } ACCESS read-create STATUS current DESCRIPTION "The access type of this entry, permit or deny." ::= { raisecomIpv6AclEntry 2 } raisecomIpv6AclProtocol OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-create STATUS current DESCRIPTION "The protocol of an IPv6 protocol. To match any Internet protocol, use the ip(0)." ::= { raisecomIpv6AclEntry 3 } raisecomIpv6AclSourceAddress OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-create STATUS current DESCRIPTION "The source ip address in the IPv6 protocol." ::= { raisecomIpv6AclEntry 4 } raisecomIpv6AclSourcePrefixLen OBJECT-TYPE SYNTAX INTEGER(0..128) ACCESS read-create STATUS current DESCRIPTION "The prefix length of the source ipv6 address." ::= { raisecomIpv6AclEntry 5 } raisecomIpv6AclDestinationAddress OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-create STATUS current DESCRIPTION "The destination ip address in the IPv6 protocol." ::= { raisecomIpv6AclEntry 6 } raisecomIpv6AclDestinationPrefixLen OBJECT-TYPE SYNTAX INTEGER(0..128) ACCESS read-create STATUS current DESCRIPTION "The prefix length of the destination ipv6 address." ::= { raisecomIpv6AclEntry 7 } raisecomIpv6AclTrafficClass OBJECT-TYPE SYNTAX INTEGER(0..256) ACCESS read-create STATUS current DESCRIPTION "The traffic class of the ipv6 protocol.Default value 256 means that traffic class is not set as a acl condition." DEFVAL { 256 } ::= { raisecomIpv6AclEntry 8 } raisecomIpv6AclFlowLabel OBJECT-TYPE SYNTAX INTEGER (0..1048575) ACCESS read-create STATUS current DESCRIPTION "The flow label value of the ipv6 protocol. To match any flow, use the flowLabel(0)." ::= { raisecomIpv6AclEntry 9 } raisecomIpv6AclRef OBJECT-TYPE SYNTAX Gauge32 ACCESS read-only STATUS current DESCRIPTION "The value descrides how many times the lists are using." ::= { raisecomIpv6AclEntry 10 } raisecomIpv6AclStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { raisecomIpv6AclEntry 11 } raisecomIpv6AclSourceProtocolPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-create STATUS current DESCRIPTION "The source protocol port in the tcp or udp protocol." ::= { raisecomIpv6AclEntry 12 } raisecomIpv6AclDestinationProtocolPort OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-create STATUS current DESCRIPTION "The destination protocol port in the tcp or udp protocol." ::= { raisecomIpv6AclEntry 13 } raisecomIpv6AclSetFlag OBJECT-TYPE SYNTAX Unsigned32 ACCESS read-create STATUS current DESCRIPTION "The flag that marks which rule is setted, one bit represents one rule." ::= { raisecomIpv6AclEntry 14 } END