--MibName=rcIpDhcpRelay -- ***************************************************************** -- switch-ipdhcprelay-mib.smi: Raisecom DHCP Relay MIB file -- -- Apr 2007, wumingyu -- -- Copyright (c) 1999-2007 by Raisecom Technology Co., Ltd. -- All rights reserved. -- -- ***************************************************************** IPDHCP-RELAY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, TimeTicks, OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC EnableVar FROM SWITCH-TC iscomSwitch FROM RAISECOM-BASE-MIB; rcIpDhcpRelay MODULE-IDENTITY LAST-UPDATED "200710150000Z" -- Oct 15, 2007 ORGANIZATION "Raisecom." CONTACT-INFO "Raisecom Systems Postal: No.617/619 Haitai Tower, 229 Fourth North Loop Middle Road, Haidian District, Beijing, PRC Tel: +86-10-82884499 E-mail: help@raisecom.com" DESCRIPTION "DHCP Relay management." REVISION "200710150000Z" -- Oct 15, 2007 DESCRIPTION "Version 1.1" ::= { iscomSwitch 30 } ------------------------------------------------------------------------------ -- define groups in rcIpDhcpRelay ------------------------------------------------------------------------------ rcIpDhcpRelayConfig OBJECT IDENTIFIER ::= { rcIpDhcpRelay 1 } rcIpDhcpRelayInformationOptionGroup OBJECT IDENTIFIER ::= { rcIpDhcpRelay 2 } rcIpDhcpRelayStatistics OBJECT IDENTIFIER ::= { rcIpDhcpRelay 3 } ------------------------------------------------------------------------------ -- begin rcIpDhcpRelayConfig-- -- rcIpDhcpRelayConfig scale MIB-- rcIpDhcpRelayEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "The state of global dhcp relay. It has two values,one is enable(1),which indicates that the system start dhcp relay; the other is disable(2) that means dhcp relay is invalid in this system. The default value is disable(2)." DEFVAL { disable } ::= { rcIpDhcpRelayConfig 1 } rcIpDhcpRelayStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS mandatory DESCRIPTION "This read-only object displays the DHCP Relay startup time." ::= { rcIpDhcpRelayConfig 2 } ------------------------------------------------------ -- rcIpDhcpRelayConfig rcIpDhcpRelayIpInterfaceTable-- ------------------------------------------------------ rcIpDhcpRelayIpInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDhcpRelayIpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains DHCP Relay State information for ip interfaces." ::= { rcIpDhcpRelayConfig 3 } rcIpDhcpRelayIpInterfaceEntry OBJECT-TYPE SYNTAX RcDhcpRelayIpInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that contains DHCP Relay State information for ip interface." INDEX { rcIpDhcpRelayIpInterfaceIfIndex } ::= { rcIpDhcpRelayIpInterfaceTable 1 } RcDhcpRelayIpInterfaceEntry ::= SEQUENCE { rcIpDhcpRelayIpInterfaceIfIndex INTEGER, rcIpDhcpRelayIpInterfaceEnable EnableVar } rcIpDhcpRelayIpInterfaceIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of IP interface table about state of DHCP Relay. Its range is (MAX_PORT_NUM + 1..MAX_PORT_NUM + MAX_SW_NUM - 1) 'MAX_PORT_NUM' is the PHY port number of a layer3 device while 'MAX_SW_NUM' is the SW interface number." REFERENCE "SOUCE-CODE OF DHCP RELAY" ::= { rcIpDhcpRelayIpInterfaceEntry 1 } rcIpDhcpRelayIpInterfaceEnable OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "The state of this IP interface enabling DHCP Relay. It has two value,one is enable(1),which indicates the IP inteface enable DHCP Relay, the other is disable(2) that means the IP interface doesn't support DHCP Relay. The default value is disable(2)." REFERENCE "SOUCE-CODE OF DHCP RELAY" ::= { rcIpDhcpRelayIpInterfaceEntry 2 } -------------------------------------------- -- rcIpDhcpRelayConfig rcIpDhcpRelayTargetTable-- -------------------------------------------- rcIpDhcpRelayTargetTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDhcpRelayTargetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains target server information for IP interfaces." ::= { rcIpDhcpRelayConfig 4 } rcIpDhcpRelayTargetEntry OBJECT-TYPE SYNTAX RcIpDhcpRelayTargetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A entry that contains target server information for IP interface." INDEX { rcIpDhcpRelayTargetIfIndex, rcIpDhcpRelayTargetAddress } ::= { rcIpDhcpRelayTargetTable 1 } RcIpDhcpRelayTargetEntry ::= SEQUENCE { rcIpDhcpRelayTargetIfIndex INTEGER, rcIpDhcpRelayTargetAddress IpAddress, rcIpDhcpRelayTargetRowStatus RowStatus } rcIpDhcpRelayTargetIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of DHCP Relay Target Address Table. Its range is (MAX_PORT_NUM + 1..MAX_PORT_NUM + MAX_SW_NUM - 1). 'MAX_PORT_NUM' is the PHY port number of a layer3 device while 'MAX_SW_NUM' is the SW interface number." REFERENCE "SOUCE-CODE OF DHCP RELAY" ::= { rcIpDhcpRelayTargetEntry 1 } rcIpDhcpRelayTargetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of target server. It's also the index of DHCP Relay Target Address Table. Each ip interface can have 4 target ip address at most." REFERENCE "SOUCE-CODE OF DHCP RELAY" ::= { rcIpDhcpRelayTargetEntry 2 } rcIpDhcpRelayTargetRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "DURABLE: The row status of DHCP Relay Target Address Table." REFERENCE "SOUCE-CODE OF DHCP RELAY." ::= { rcIpDhcpRelayTargetEntry 3 } -- end rcIpDhcpRelayConfig-- ------------------------------------------------ -- begin rcIpDhcpRelayInformationOptionGroup-- -- rcIpDhcpRelayInformationOptionGroup scale MIB-- ------------------------------------------------ rcIpDhcpRelayInformationOption OBJECT-TYPE SYNTAX EnableVar MAX-ACCESS read-write STATUS current DESCRIPTION "The state of dhcp relay supporting option 82. It has two values,one is enable(1),which indicates that the system support option 82; the other is disable(2) that means the system is without option 82 supporting. The default value is disable(2)." DEFVAL { disable } ::= { rcIpDhcpRelayInformationOptionGroup 1 } rcIpDhcpRelayInformationPolicy OBJECT-TYPE SYNTAX INTEGER{drop(1), keep(2), replace(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the DHCP Relay handling policy of DHCP request message including option 82. This object only supports drop(1),keep(2) and replace(3) value. Setting this object to 'drop', option 82 packets will be discarded; setting to 'keep',option 82 packets will be forwarded without any change; setting to 'replace', option 82 packets will be forwarded with a new option 82 field. Its default value is 'replace'." DEFVAL { replace } ::= { rcIpDhcpRelayInformationOptionGroup 2 } -- -- rcIpDhcpRelayInformationOptionGroup rcIpDhcpRelayInformationOptionTrustTable-- -- rcIpDhcpRelayInformationOptionTrustTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpDhcpRelayInformationOptionTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table provides the mechanism to control dhcp relay trust per port." ::= { rcIpDhcpRelayInformationOptionGroup 3 } rcIpDhcpRelayInformationOptionTrustEntry OBJECT-TYPE SYNTAX RcIpDhcpRelayInformationOptionTrustEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch dhcp relay trust based on port." INDEX { rcIpDhcpRelayInformationOptionTrustPortIfIndex } ::= { rcIpDhcpRelayInformationOptionTrustTable 1 } RcIpDhcpRelayInformationOptionTrustEntry ::= SEQUENCE { rcIpDhcpRelayInformationOptionTrustPortIfIndex INTEGER, rcIpDhcpRelayInformationOptionTrustState INTEGER } rcIpDhcpRelayInformationOptionTrustPortIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index that uniquely identifies a port in DHCP Relay trust table. Eg: for ISCOM3012gf, the value range is from 1 to 12, for ISCOM3026/3026e, the value range is from 1 to 26, for iscom3028f,from 1 to 28, for iscom3052,from 1 to 52,and so on." ::= { rcIpDhcpRelayInformationOptionTrustEntry 1} rcIpDhcpRelayInformationOptionTrustState OBJECT-TYPE SYNTAX INTEGER{trusted(1), untrusted(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The trust state of this port. It has two value,one is trusted (1), which indicates the port support DHCP Relay trust; the other is untrusted (2) that means the port doesn't support DHCP Relay trust. The default value is untrusted(2)." ::= { rcIpDhcpRelayInformationOptionTrustEntry 2} -- end rcIpDhcpRelayInformationOptionGroup-- -- -- begin rcIpDhcpRelayStatisticsGroup----- -- rcIpDhcpRelayStatisticsGroup scale MIB-- -- rcIpDhcpRelayStatsBootpsRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bootp packets received by DHCP relay." ::= {rcIpDhcpRelayStatistics 1 } rcIpDhcpRelayStatsBootpsSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Bootp packets sended by DHCP relay." ::= {rcIpDhcpRelayStatistics 2 } rcIpDhcpRelayStatsDiscoversRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Discover packets received by DHCP relay." ::= { rcIpDhcpRelayStatistics 3 } rcIpDhcpRelayStatsDiscoversSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Discover packets sended by DHCP relay." ::= { rcIpDhcpRelayStatistics 4 } rcIpDhcpRelayStatsRequestsRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Request packets received by DHCP relay." ::= { rcIpDhcpRelayStatistics 5 } rcIpDhcpRelayStatsRequestsSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Request packets sended by DHCP relay." ::= { rcIpDhcpRelayStatistics 6 } rcIpDhcpRelayStatsReleasesRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Release packets received by DHCP relay." ::= { rcIpDhcpRelayStatistics 7 } rcIpDhcpRelayStatsReleasesSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Release packets sended by DHCP relay." ::= { rcIpDhcpRelayStatistics 8 } rcIpDhcpRelayStatsOffersRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Offer packets received by DHCP relay." ::= { rcIpDhcpRelayStatistics 9 } rcIpDhcpRelayStatsOffersSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Offer packets sended by DHCP relay." ::= { rcIpDhcpRelayStatistics 10 } rcIpDhcpRelayStatsAcksRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Ack packets received by DHCP relay." ::= { rcIpDhcpRelayStatistics 11 } rcIpDhcpRelayStatsAcksSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Ack packets sended by DHCP relay." ::= { rcIpDhcpRelayStatistics 12 } rcIpDhcpRelayStatsNacksRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Nack packets received by DHCP relay." ::= { rcIpDhcpRelayStatistics 13 } rcIpDhcpRelayStatsNacksSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Nack packets sended by DHCP relay." ::= { rcIpDhcpRelayStatistics 14 } rcIpDhcpRelayStatsDeclinesRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Decline packets received by DHCP relay." ::= {rcIpDhcpRelayStatistics 15 } rcIpDhcpRelayStatsDeclinesSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Decline packets sended by DHCP relay." ::= {rcIpDhcpRelayStatistics 16 } rcIpDhcpRelayStatsInformationsRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Inform packets received by DHCP relay." ::= {rcIpDhcpRelayStatistics 17 } rcIpDhcpRelayStatsInformationsSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Inform packets sended by DHCP relay." ::= {rcIpDhcpRelayStatistics 18 } rcIpDhcpRelayStatsUnknowns OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of Unknown packets received by DHCP relay." ::= {rcIpDhcpRelayStatistics 19 } rcIpDhcpRelayStatsPacketsRcv OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets received by DHCP relay." ::= {rcIpDhcpRelayStatistics 20 } rcIpDhcpRelayStatsPacketsSnd OBJECT-TYPE SYNTAX Counter MAX-ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets sended by DHCP relay." ::= {rcIpDhcpRelayStatistics 21 } -- end rcIpDhcpRelayStatisticsGroup -- END