--MibName=rcDhcpOption -- ***************************************************************** -- switch-dhcpoptin-mib.mib: Raisecom DHCP Option MIB file -- -- 20081105,tangyoucan -- -- -- Copyright (c) 1996-2008 by Raisecom Technology Co., Ltd. -- All rights reserved. -- -- 01, 20110803, yzh mib document check -- ***************************************************************** DHCP-OPTION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF RowStatus FROM SNMPv2-TC EnableVar FROM SWITCH-TC iscomSwitch FROM RAISECOM-BASE-MIB rcPortIndex FROM SWITCH-SYSTEM-MIB; rcDhcpOption MODULE-IDENTITY LAST-UPDATED "200811050000Z" ORGANIZATION "Raisecom Technology Co., Ltd." CONTACT-INFO "Raisecom Science & Technology Co., ltd. E-mail: support@raisecom.com" DESCRIPTION "This MIB module is designed for DHCP option ,the current version of which only contain sub-option 1 and 2 of Option 82, i.e. circuit ID and remote ID." REVISION "200811060000Z" DESCRIPTION "version 1.0" ::= { iscomSwitch 41 } ------------------------------------------------------------------------------ -- define groups in rcDhcpOption ------------------------------------------------------------------------------ rcDhcpOptionMibObjects OBJECT IDENTIFIER ::= { rcDhcpOption 1 } rcDhcpOption82PortGroup OBJECT IDENTIFIER ::= { rcDhcpOptionMibObjects 1 } rcDhcpOption82ConfigGroup OBJECT IDENTIFIER ::= { rcDhcpOptionMibObjects 2 } rcDhcpOptionGlobalGroup OBJECT IDENTIFIER ::= { rcDhcpOptionMibObjects 3 } rcDhcpOptionPortGroup OBJECT IDENTIFIER ::= { rcDhcpOptionMibObjects 4 } ------------------------------------------------------------------------------ ------------------------------------------------------------------------ -- begin rcDhcpOption82PortGroup-- -------------------------------------------------------------------------- rcDhcpOption82PortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDhcpOption82PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table keep record of circuit ID for every port." ::= { rcDhcpOption82PortGroup 1 } rcDhcpOption82PortEntry OBJECT-TYPE SYNTAX RcDhcpOption82PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch dhcp option config based on port." INDEX { rcDhcpOption82PortIndex } ::= { rcDhcpOption82PortTable 1 } RcDhcpOption82PortEntry ::= SEQUENCE { rcDhcpOption82PortIndex INTEGER, rcDhcpOption82CircuitID OCTET STRING (SIZE(1..64)) } rcDhcpOption82PortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcpOption82PortEntry 1} rcDhcpOption82CircuitID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "string of circuit-ID in which you can fill anything you want. The maximum length is 64 bytes.If it not configged,it is zero. if it configged,the OPTION82 will use it as circuit-id." ::= { rcDhcpOption82PortEntry 2 } -- end rcDhcpOption82PortGroup-- -- begin rcDhcpOption82ConfigGroup -- rcDhcpOption82ConfigGroup scale MIB rcDhcpOption82AttachString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "the string use in sub option 1,in this mode,the sub option 1 discribe as port-number\VID\AttachingSring ." ::= { rcDhcpOption82ConfigGroup 1 } rcDhcpOption82RemoteIDMode OBJECT-TYPE SYNTAX INTEGER{switchmac(1), clientmac(2), switchmac-string(3), clientmac-string(4), hostname(5), user-defined(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "mode of Remote-ID, switchmac:switch MAC as HEX;clientmac:client MAC as HEX; switchmac-string:switch MAX as string;clientmac-string:client MAC as string; hostname:host name of device;user-defined:string of user set." DEFVAL { switchmac } ::= { rcDhcpOption82ConfigGroup 2 } rcDhcpOption82RemoteIDString OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "string of remote ID, only used in user-define mode. if the remote-id mode is not user-define , it returns NULL." ::= { rcDhcpOption82ConfigGroup 3 } -- end rcDhcpOption82ConfigGroup-- rcDhcpOptionGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDhcpOptionGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table keep record of option content for every port." ::= { rcDhcpOptionGlobalGroup 1 } rcDhcpOptionGlobalEntry OBJECT-TYPE SYNTAX RcDhcpOptionGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch dhcp option config based on option code." INDEX { rcDhcpOptionCode } ::= { rcDhcpOptionGlobalTable 1 } RcDhcpOptionGlobalEntry ::= SEQUENCE { rcDhcpOptionCode OCTET STRING, rcDhcpOptionContent OCTET STRING, rcDhcpOptionLength OCTET STRING, rcDhcpOptionType INTEGER, rcDhcpOptionRowStatus RowStatus } rcDhcpOptionCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcpOptionGlobalEntry 1} rcDhcpOptionContent OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "string of option content in which you can fill anything you want. The maximum length is 32 bytes. If it not configged,it is zero." ::= { rcDhcpOptionGlobalEntry 2 } rcDhcpOptionLength OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "length of the option content which is configged." ::= { rcDhcpOptionGlobalEntry 3 } rcDhcpOptionType OBJECT-TYPE SYNTAX INTEGER{ asciiString(1), hexString(2), ipAddress(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "type of the option content which is configged." ::= { rcDhcpOptionGlobalEntry 4 } rcDhcpOptionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "control the ipv4 global option config table." ::= { rcDhcpOptionGlobalEntry 5 } rcDhcp6OptionGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDhcp6OptionGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table keep record of global option content for every option code." ::= { rcDhcpOptionGlobalGroup 2 } rcDhcp6OptionGlobalEntry OBJECT-TYPE SYNTAX RcDhcp6OptionGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch dhcp option config based on option code." INDEX { rcDhcp6OptionCode } ::= { rcDhcp6OptionGlobalTable 1 } RcDhcp6OptionGlobalEntry ::= SEQUENCE { rcDhcp6OptionCode OCTET STRING, rcDhcp6OptionContent OCTET STRING, rcDhcp6OptionLength OCTET STRING, rcDhcp6OptionType INTEGER, rcDhcp6OptionRowStatus RowStatus } rcDhcp6OptionCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcp6OptionGlobalEntry 1} rcDhcp6OptionContent OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "string of option content in which you can fill anything you want. The maximum length is 32 bytes.If it not configged,it is zero." ::= { rcDhcp6OptionGlobalEntry 2 } rcDhcp6OptionLength OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "length of the option content which is configged." ::= { rcDhcp6OptionGlobalEntry 3 } rcDhcp6OptionType OBJECT-TYPE SYNTAX INTEGER { asciiString(1), hexString(2), ipAddress(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "type of the option content which is configged." ::= { rcDhcp6OptionGlobalEntry 4 } rcDhcp6OptionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "control the ipv6 global option config table." ::= { rcDhcp6OptionGlobalEntry 5 } -------------------------------------------------------------------------- rcDhcpOptionPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDhcpOptionPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table keep record of option content for every port and option code" ::= { rcDhcpOptionPortGroup 1 } rcDhcpOptionPortEntry OBJECT-TYPE SYNTAX RcDhcpOptionPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch dhcp option config based on port and option code" INDEX { rcDhcpOptionPortIndex, rcDhcpOptionPortCode } ::= { rcDhcpOptionPortTable 1 } RcDhcpOptionPortEntry ::= SEQUENCE { rcDhcpOptionPortIndex INTEGER, rcDhcpOptionPortCode OCTET STRING, rcDhcpOptionPortContent OCTET STRING, rcDhcpOptionPortLength OCTET STRING, rcDhcpOptionPortType INTEGER, rcDhcpOptionPortRowStatus RowStatus } rcDhcpOptionPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcpOptionPortEntry 1} rcDhcpOptionPortCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcpOptionPortEntry 2} rcDhcpOptionPortContent OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "string of option content in which you can fill anything you want. The maximum length is 32 bytes.If it not configged,it is zero." ::= { rcDhcpOptionPortEntry 3 } rcDhcpOptionPortLength OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "length of the option content which is configged." ::= { rcDhcpOptionPortEntry 4 } rcDhcpOptionPortType OBJECT-TYPE SYNTAX INTEGER { asciiString(1), hexString(2), ipAddress(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "type of the option content which is configged." ::= { rcDhcpOptionPortEntry 5 } rcDhcpOptionPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "control the ipv4 port option config table." ::= { rcDhcpOptionPortEntry 6 } -- rcDhcp6OptionPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcDhcp6OptionPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table keep record of option content for every port and option code" ::= { rcDhcpOptionPortGroup 2 } rcDhcp6OptionPortEntry OBJECT-TYPE SYNTAX RcDhcp6OptionPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table entry for switch dhcp option config based on port and option code" INDEX { rcDhcp6OptionPortIndex, rcDhcp6OptionPortCode } ::= { rcDhcp6OptionPortTable 1 } RcDhcp6OptionPortEntry ::= SEQUENCE { rcDhcp6OptionPortIndex INTEGER, rcDhcp6OptionPortCode OCTET STRING, rcDhcp6OptionPortContent OCTET STRING, rcDhcp6OptionPortLength OCTET STRING, rcDhcp6OptionPortType INTEGER, rcDhcp6OptionPortRowStatus RowStatus } rcDhcp6OptionPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcp6OptionPortEntry 1} rcDhcp6OptionPortCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index that uniquely identifies a configuration about dhcp option" ::= { rcDhcp6OptionPortEntry 2} rcDhcp6OptionPortContent OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "string of option content in which you can fill anything you want. The maximum length is 32 bytes.If it not configged,it is zero." ::= { rcDhcp6OptionPortEntry 3 } rcDhcp6OptionPortLength OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "length of the option content which is configged." ::= { rcDhcp6OptionPortEntry 4 } rcDhcp6OptionPortType OBJECT-TYPE SYNTAX INTEGER { asciiString(1), hexString(2), ipAddress(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "type of the option content which is configged." ::= { rcDhcp6OptionPortEntry 5 } rcDhcp6OptionPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "control the ipv6 port option config table." ::= { rcDhcp6OptionPortEntry 6 } END