BWM-MIB DEFINITIONS ::= BEGIN -- Title: RADWARE -- This Private MIB supports the WSD/CSD/FP/LP -- Version: 3.0 -- Date: 24 May 2016 -- By: RMA (Radware MIB Authority) -- E-mail: US: support@radware.com -- International: support_int@radware.com -- IMPORTS NetworkAddress, IpAddress, Counter, Gauge, enterprises FROM RFC1155-SMI Ipv6Address FROM IPV6-TC Integer32 FROM SNMPv2-SMI OBJECT-TYPE FROM RFC-1212 DisplayString, ipAddrEntry FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215 rsBWM, rndErrorDesc, rndErrorSeverity, TruthValue, RowStatus, FeatureStatus FROM RADWARE-MIB MacAddress FROM SNMPv2-TC DpsSessionType FROM GENERIC-MIB; NetNumber ::= OCTET STRING (SIZE(4)) -- Some MIB compilers require that the following 7 lines which define the path -- to RND MIB are commented out: -- mib OBJECT IDENTIFIER ::= { mgmt 1 } -- directory OBJECT IDENTIFIER ::= { internet 1 } -- experimental OBJECT IDENTIFIER ::= { internet 3 } -- private OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { private 1 } rsBWMRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, facs etc..." ::= {rsBWM 1} rsBWMRulesEntry OBJECT-TYPE SYNTAX RsBWMRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMRulesName } ::= { rsBWMRulesTable 1 } RsBWMRulesEntry ::= SEQUENCE { rsBWMRulesIndex INTEGER, rsBWMRulesName DisplayString, rsBWMRulesDestination DisplayString, rsBWMRulesSource DisplayString, rsBWMRulesStatus RowStatus, rsBWMRulesAction INTEGER, rsBWMRulesDirection INTEGER, rsBWMRulesPriority INTEGER, rsBWMRulesPhysicalPort INTEGER, rsBWMRulesType INTEGER, rsBWMRulesDescription DisplayString, rsBWMRulesGuaranteedBW Integer32, rsBWMRulesPolicyType INTEGER, rsBWMRulesPolicy DisplayString, rsBWMRulesOperationalStatus INTEGER, rsBWMRulesDSCPMarking INTEGER, rsBWMRulesReportBlockedPackets INTEGER, rsBWMRulesMaxBW Integer32, rsBWMRulesSpecific DisplayString, rsBWMRulesPhysicalPortGroup DisplayString, rsBWMRulesVLANTagGroup DisplayString, rsBWMRulesTrafficIdentification INTEGER, rsBWMRulesTrafficFlowMaxBW INTEGER, rsBWMRulesMaxConcurrentSessions INTEGER, rsBWMRulesTrafficIDCookieField DisplayString, rsBWMRulesPolicyGroup DisplayString, rsBWMRulesRadiusRule DisplayString } rsBWMRulesIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the rules." ::= { rsBWMRulesEntry 1 } rsBWMRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMRulesEntry 2} rsBWMRulesDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMRulesEntry 3} rsBWMRulesSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMRulesEntry 4} rsBWMRulesStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMRulesEntry 5 } rsBWMRulesAction OBJECT-TYPE SYNTAX INTEGER { none(0), forward(1), block(2), blockAndReset(3), blockAndBiDirectionalReset(4), monitorHTTP(5), monitorHTTPS(6), monitorTCP(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the action that the classifier / service must take on this entry." DEFVAL { 1 } ::= { rsBWMRulesEntry 6 } rsBWMRulesDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2), session(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." DEFVAL { 2 } ::= { rsBWMRulesEntry 7 } rsBWMRulesPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the priority for this entry." DEFVAL { 65535 } ::= { rsBWMRulesEntry 8 } rsBWMRulesPhysicalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the port from which the packet arrived. (obsolete field)" DEFVAL { 0 } ::= { rsBWMRulesEntry 9 } rsBWMRulesType OBJECT-TYPE SYNTAX INTEGER { facsBandwidth(1), counter(2), ids(3), chain(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the type of rules (services) ." DEFVAL { 1 } ::= { rsBWMRulesEntry 10 } rsBWMRulesDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "Description." ::= { rsBWMRulesEntry 11 } rsBWMRulesGuaranteedBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth allocated for a certain rule." DEFVAL { 0 } ::= { rsBWMRulesEntry 12 } rsBWMRulesPolicyType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-write STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMRulesEntry 13 } rsBWMRulesPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMRulesEntry 14 } rsBWMRulesOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if the rule is active or inactive. The active rule table contains only active rules." DEFVAL { 1 } ::= { rsBWMRulesEntry 15 } rsBWMRulesDSCPMarking OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-write STATUS mandatory DESCRIPTION "OLD parameter. no longer in use (moved to extensions). " DEFVAL { -1 } ::= { rsBWMRulesEntry 16 } rsBWMRulesReportBlockedPackets OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), securityEvent (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if blocked packets are be reported." ::= { rsBWMRulesEntry 17 } rsBWMRulesMaxBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain rule.The range is 0 - 8000000.Default value (2147483647) is translated to Unlimited" DEFVAL { 2147483647 } ::= { rsBWMRulesEntry 18 } rsBWMRulesSpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMRulesEntry 19 } rsBWMRulesPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the physical port group for this rule." ::= { rsBWMRulesEntry 20 } rsBWMRulesVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMRulesEntry 21 } rsBWMRulesTrafficIdentification OBJECT-TYPE SYNTAX INTEGER { none (0), client (1), session (2), connection (3), fullL4Session (4), sessionCookie (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Not In Use." ::= { rsBWMRulesEntry 22 } rsBWMRulesTrafficFlowMaxBW OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Not In Use" ::= { rsBWMRulesEntry 23 } rsBWMRulesMaxConcurrentSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Not In Use" ::= { rsBWMRulesEntry 24 } rsBWMRulesTrafficIDCookieField OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "Not In Use" ::= { rsBWMRulesEntry 25 } rsBWMRulesPolicyGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "Group the policies for bandwidth sharing." ::= { rsBWMRulesEntry 26 } rsBWMRulesRadiusRule OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table" DEFVAL { "any" } ::= {rsBWMRulesEntry 27} rsBWMRulesIPObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMRulesIPObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the grouping for ranges." ::= {rsBWM 2} rsBWMRulesIPObjectEntry OBJECT-TYPE SYNTAX RsBWMRulesIPObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMRulesIPObjectName,rsBWMRulesIPObjectSubIndex} ::= { rsBWMRulesIPObjectTable 1 } RsBWMRulesIPObjectEntry ::= SEQUENCE { rsBWMRulesIPObjectName DisplayString, rsBWMRulesIPObjectSubIndex INTEGER, rsBWMRulesIPObjectAddress IpAddress, rsBWMRulesIPObjectMask IpAddress, rsBWMRulesIPObjectFromIP IpAddress, rsBWMRulesIPObjectToIP IpAddress, rsBWMRulesIPObjectMode INTEGER, rsBWMRulesIPObjectStatus RowStatus } rsBWMRulesIPObjectName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the IP Object Rule, must be unique." ::= { rsBWMRulesIPObjectEntry 1 } rsBWMRulesIPObjectSubIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SubIndex." DEFVAL { 0 } ::= { rsBWMRulesIPObjectEntry 2 } rsBWMRulesIPObjectAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address" DEFVAL { 0 } ::= { rsBWMRulesIPObjectEntry 3 } rsBWMRulesIPObjectMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address mask." DEFVAL { 0 } ::= { rsBWMRulesIPObjectEntry 4 } rsBWMRulesIPObjectFromIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The from IP Address of the range." DEFVAL { 0 } ::= { rsBWMRulesIPObjectEntry 5 } rsBWMRulesIPObjectToIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The to IP Address of the range." DEFVAL { 0 } ::= { rsBWMRulesIPObjectEntry 6 } rsBWMRulesIPObjectMode OBJECT-TYPE SYNTAX INTEGER { ipMask(1), ipRange(2), dynamic(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the mode of the entry. This is either a range or an IP address and mask." -- DEFVAL { 1 } ::= { rsBWMRulesIPObjectEntry 7 } rsBWMRulesIPObjectStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMRulesIPObjectEntry 8 } rsBWMCBQMode OBJECT-TYPE SYNTAX INTEGER { cyclic(1), cbq(2) } ACCESS read-write STATUS mandatory DESCRIPTION "CBQ Mode." DEFVAL { 1 } ::= {rsBWM 3} rsBWMActualQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current size of the queue." DEFVAL { 0 } ::= {rsBWM 4} rsBWMAverageQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current average queue size." DEFVAL { 0 } ::= {rsBWM 5} rsBWMQueueRedDropped OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current red dropped packets." DEFVAL { 0 } ::= {rsBWM 6} rsBWMPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table for reading the packets sent via each priority" ::= {rsBWM 7} rsBWMPriorityEntry OBJECT-TYPE SYNTAX RsBWMPriorityEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for the priority table" INDEX {rsBWMPriority} ::= {rsBWMPriorityTable 1} RsBWMPriorityEntry ::= SEQUENCE { rsBWMPriority INTEGER, rsBWMPacketsSent INTEGER } rsBWMPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The priority" ::= {rsBWMPriorityEntry 1} rsBWMPacketsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets sent via this priority" ::= {rsBWMPriorityEntry 2} rsBWMRedMode OBJECT-TYPE SYNTAX INTEGER { none (1), global (2), weighted (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The RED algorithm mode" -- DEFVAL { none } ::= {rsBWM 8} rsBWMCurrentRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, facs etc..." ::= {rsBWM 9} rsBWMCurrentRulesEntry OBJECT-TYPE SYNTAX RsBWMCurrentRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentRulesName } ::= { rsBWMCurrentRulesTable 1 } RsBWMCurrentRulesEntry ::= SEQUENCE { rsBWMCurrentRulesIndex INTEGER, rsBWMCurrentRulesName DisplayString, rsBWMCurrentRulesDestination DisplayString, rsBWMCurrentRulesSource DisplayString, rsBWMCurrentRulesAction INTEGER, rsBWMCurrentRulesDirection INTEGER, rsBWMCurrentRulesPriority INTEGER, rsBWMCurrentRulesPhysicalPort INTEGER, rsBWMCurrentRulesType INTEGER, rsBWMCurrentRulesDescription DisplayString, rsBWMCurrentRulesGuaranteedBW Counter, rsBWMCurrentRulesMaxBW Counter, rsBWMCurrentRulesPolicyType INTEGER, rsBWMCurrentRulesPolicy DisplayString, rsBWMCurrentRulesDSCPMarking INTEGER, rsBWMCurrentRulesReportBlockedPackets INTEGER, rsBWMCurrentRulesSpecific DisplayString, rsBWMCurrentRulesPhysicalPortGroup DisplayString, rsBWMCurrentRulesVLANTagGroup DisplayString, rsBWMCurrentRulesTrafficIdentification INTEGER, rsBWMCurrentRulesTrafficFlowMaxBW INTEGER, rsBWMCurrentRulesMaxConcurrentSessions INTEGER, rsBWMCurrentRulesTrafficIDCookieField DisplayString, rsBWMCurrentRulesPolicyGroup DisplayString, rsBWMCurrentRulesRadiusRule DisplayString } rsBWMCurrentRulesIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determine the order of the rules." ::= { rsBWMCurrentRulesEntry 1 } rsBWMCurrentRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMCurrentRulesEntry 2} rsBWMCurrentRulesDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMCurrentRulesEntry 3} rsBWMCurrentRulesSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMCurrentRulesEntry 4} rsBWMCurrentRulesAction OBJECT-TYPE SYNTAX INTEGER { none(0), forward(1), block(2), blockAndReset(3), blockAndBiDirectionalReset(4), monitorHTTP(5), monitorHTTPS(6), monitorTCP(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the action that the classifier / service must take on this entry." ::= { rsBWMCurrentRulesEntry 5 } rsBWMCurrentRulesDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2), session(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." ::= { rsBWMCurrentRulesEntry 6 } rsBWMCurrentRulesPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the priority for this entry." ::= { rsBWMCurrentRulesEntry 7 } rsBWMCurrentRulesPhysicalPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the port from which the packet arrived." ::= { rsBWMCurrentRulesEntry 8 } rsBWMCurrentRulesType OBJECT-TYPE SYNTAX INTEGER { facsBandwidth(1), counter(2), ids(3), chain(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the type of rules (services) ." ::= { rsBWMCurrentRulesEntry 9 } rsBWMCurrentRulesDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Description." ::= { rsBWMCurrentRulesEntry 10 } rsBWMCurrentRulesGuaranteedBW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bandwidth allocated for a certain rule." ::= { rsBWMCurrentRulesEntry 11 } rsBWMCurrentRulesMaxBW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain rule." ::= { rsBWMCurrentRulesEntry 12 } rsBWMCurrentRulesPolicyType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-only STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMCurrentRulesEntry 13 } rsBWMCurrentRulesPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMCurrentRulesEntry 14 } rsBWMCurrentRulesDSCPMarking OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-only STATUS mandatory DESCRIPTION "OLD parameter. no longer in use (moved to extensions). " ::= { rsBWMCurrentRulesEntry 15 } rsBWMCurrentRulesReportBlockedPackets OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), securityEvent (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if blocked packets are be reported." ::= { rsBWMCurrentRulesEntry 16 } rsBWMCurrentRulesSpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMCurrentRulesEntry 17 } rsBWMCurrentRulesPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the physical port group for this rule." ::= { rsBWMCurrentRulesEntry 18 } rsBWMCurrentRulesVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMCurrentRulesEntry 19 } rsBWMCurrentRulesTrafficIdentification OBJECT-TYPE SYNTAX INTEGER { none (0), client (1), session (2), connection (3), fullL4Session (4), sessionCookie (5) } ACCESS read-only STATUS mandatory DESCRIPTION "Not In Use." ::= { rsBWMCurrentRulesEntry 20 } rsBWMCurrentRulesTrafficFlowMaxBW OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Not In Use." ::= { rsBWMCurrentRulesEntry 21 } rsBWMCurrentRulesMaxConcurrentSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Not In Use." ::= { rsBWMCurrentRulesEntry 22 } rsBWMCurrentRulesTrafficIDCookieField OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Not In Use." ::= { rsBWMCurrentRulesEntry 23 } rsBWMCurrentRulesPolicyGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Group the policies for bandwidth sharing." ::= { rsBWMCurrentRulesEntry 24 } rsBWMCurrentRulesRadiusRule OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table" DEFVAL { "any" } ::= {rsBWMCurrentRulesEntry 25} rsBWMCurrentRulesIPObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentRulesIPObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the grouping for ranges." ::= {rsBWM 10} rsBWMCurrentRulesIPObjectEntry OBJECT-TYPE SYNTAX RsBWMCurrentRulesIPObjectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMCurrentRulesIPObjectName,rsBWMCurrentRulesIPObjectSubIndex} ::= { rsBWMCurrentRulesIPObjectTable 1 } RsBWMCurrentRulesIPObjectEntry ::= SEQUENCE { rsBWMCurrentRulesIPObjectName DisplayString, rsBWMCurrentRulesIPObjectSubIndex INTEGER, rsBWMCurrentRulesIPObjectAddress IpAddress, rsBWMCurrentRulesIPObjectMask IpAddress, rsBWMCurrentRulesIPObjectFromIP IpAddress, rsBWMCurrentRulesIPObjectToIP IpAddress, rsBWMCurrentRulesIPObjectMode INTEGER } rsBWMCurrentRulesIPObjectName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the IP Object Rule, must be unique." ::= { rsBWMCurrentRulesIPObjectEntry 1 } rsBWMCurrentRulesIPObjectSubIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SubIndex." ::= { rsBWMCurrentRulesIPObjectEntry 2 } rsBWMCurrentRulesIPObjectAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address" ::= { rsBWMCurrentRulesIPObjectEntry 3 } rsBWMCurrentRulesIPObjectMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "IP address mask." ::= { rsBWMCurrentRulesIPObjectEntry 4 } rsBWMCurrentRulesIPObjectFromIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The from IP Address of the range." ::= { rsBWMCurrentRulesIPObjectEntry 5 } rsBWMCurrentRulesIPObjectToIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The to IP Address of the range." ::= { rsBWMCurrentRulesIPObjectEntry 6 } rsBWMCurrentRulesIPObjectMode OBJECT-TYPE SYNTAX INTEGER { ipMask(1), ipRange(2), dynamic(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the mode of the entry. This is either a range or an IP address and mask." ::= { rsBWMCurrentRulesIPObjectEntry 7 } rsBWMClassificationMode OBJECT-TYPE SYNTAX INTEGER { policies(1), disabled(2), diffserv(3), tos(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The rule classifiction mode" DEFVAL { 2 } ::= { rsBWM 11 } rsBWMMaximumBandwidth OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The maximum output bandwidth of the device. This is in Bytes" ::= { rsBWM 12 } rsBWMBandwidthBorrowingMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether or not rules are able to borrow bandwidth from other rules" ::= { rsBWM 13 } rsBWMActions OBJECT-TYPE SYNTAX INTEGER { updateRules(1), defaultDSCPs(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows the application to perform specific actions" ::= { rsBWM 14 } rsBWMFilterEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the filters." ::= { rsBWM 15 } rsBWMFilterEntry OBJECT-TYPE SYNTAX RsBWMFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMFilterName } ::= { rsBWMFilterEntryTable 1 } RsBWMFilterEntry ::= SEQUENCE { rsBWMFilterName DisplayString, rsBWMFilterDescription DisplayString, rsBWMFilterProtocol INTEGER, rsBWMFilterDestinationPort INTEGER, rsBWMFilterSourceFromPort INTEGER, rsBWMFilterSourceToPort INTEGER, rsBWMFilterOMPCOffset INTEGER, rsBWMFilterOMPCMask OCTET STRING, rsBWMFilterOMPCPattern OCTET STRING, rsBWMFilterOMPCCondition INTEGER, rsBWMFilterOMPCLength INTEGER, rsBWMFilterContentOffset INTEGER, rsBWMFilterContent DisplayString, rsBWMFilterContentType INTEGER, rsBWMFilterType INTEGER, rsBWMFilterStatus RowStatus, rsBWMFilterContentEnd INTEGER, rsBWMFilterContentData DisplayString, rsBWMFilterContentCoding INTEGER, rsBWMFilterContentDataCoding INTEGER, rsBWMFilterOMPCOffsetBase INTEGER, rsBWMFilterDestinationMaxPort INTEGER, rsBWMFilterSourceAppPortGroup DisplayString, rsBWMFilterDestinationAppPortGroup DisplayString, rsBWMFilterSessionType DpsSessionType, rsBWMFilterSessionTypeDirection INTEGER } rsBWMFilterName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter object." ::= { rsBWMFilterEntry 1 } rsBWMFilterDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The description of the filter." ::= { rsBWMFilterEntry 2 } rsBWMFilterProtocol OBJECT-TYPE SYNTAX INTEGER { ip (1), tcp (2), udp (3), icmp (4), nonIp (5), icmpv6 (6), sctp(7) } ACCESS read-write STATUS mandatory DESCRIPTION "The protocol for the filter." DEFVAL { 1 } ::= { rsBWMFilterEntry 3 } rsBWMFilterDestinationPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete mib field" ::= { rsBWMFilterEntry 4 } rsBWMFilterSourceFromPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete mib field" ::= { rsBWMFilterEntry 5 } rsBWMFilterSourceToPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete mib field" ::= { rsBWMFilterEntry 6 } rsBWMFilterOMPCOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The offset of the OMPC data." ::= { rsBWMFilterEntry 7 } rsBWMFilterOMPCMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "The mask for the OMPC object." DEFVAL { "00000000" } ::= { rsBWMFilterEntry 8 } rsBWMFilterOMPCPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-write STATUS mandatory DESCRIPTION "The pattern for the OMPC data." DEFVAL { "00000000" } ::= { rsBWMFilterEntry 9 } rsBWMFilterOMPCCondition OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), equal (2), notEqual (3), greaterThan (4), lessThan (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The condition for the OMPC data check." DEFVAL { 1 } ::= { rsBWMFilterEntry 10 } rsBWMFilterOMPCLength OBJECT-TYPE SYNTAX INTEGER { oneByte (1), twoBytes (2), threeBytes (3), fourBytes (4), notApplicable (5) } ACCESS read-write STATUS mandatory DESCRIPTION "The length of the OMPC." DEFVAL { 5 } ::= { rsBWMFilterEntry 11 } rsBWMFilterContentOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The offset for the content." ::= { rsBWMFilterEntry 12 } rsBWMFilterContent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The content to be checked." ::= { rsBWMFilterEntry 13 } rsBWMFilterContentType OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), url (2), text(3), hostname(4), headertype(5), expression(6), maildomain(7), mailto(8), mailfrom(9), mailsubject(10), filetype(11), cookiedata(12), idsurl(13), pop3user(14), urilength(15), ftp(16), ftpcontent(17), rpc(18), dceRPC(19), genericUrl(20), genericHeader(21), genericCookie(22), sipcallfrom(23), sipcallto(24), sipcaller(25) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of content. In the case of URL only the url is checked. (No offset is used). In the case of text then the entire packet is checked. (will make use of the offset)." DEFVAL { 1 } ::= { rsBWMFilterEntry 14 } rsBWMFilterType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete." DEFVAL { 1 } ::= { rsBWMFilterEntry 15 } rsBWMFilterStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the object." ::= { rsBWMFilterEntry 16 } rsBWMFilterContentEnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "End of search data." ::= { rsBWMFilterEntry 17 } rsBWMFilterContentData OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "Additional content data, used for header type entries." ::= { rsBWMFilterEntry 18 } rsBWMFilterContentCoding OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), caseInsensitive (2), caseSensitive (3), hex (4), international(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of content coding that is used." DEFVAL { 1 } ::= { rsBWMFilterEntry 19 } rsBWMFilterContentDataCoding OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), caseInsensitive (2), caseSensitive (3), hex (4), international(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of content data coding that is used." DEFVAL { 1 } ::= { rsBWMFilterEntry 20 } rsBWMFilterOMPCOffsetBase OBJECT-TYPE SYNTAX INTEGER { none (0), ipHeader (1), ipData (2), tcpData (3), asn1 (4), ethernet (5), l4Header (6), ipv6Header (7) } ACCESS read-write STATUS mandatory DESCRIPTION "The base of filter OMPC offset." ::= { rsBWMFilterEntry 21 } rsBWMFilterDestinationMaxPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete mib field." ::= { rsBWMFilterEntry 22 } rsBWMFilterSourceAppPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The source port group." ::= { rsBWMFilterEntry 23 } rsBWMFilterDestinationAppPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination port group." ::= { rsBWMFilterEntry 24 } rsBWMFilterSessionType OBJECT-TYPE SYNTAX DpsSessionType ACCESS read-write STATUS mandatory DESCRIPTION "The type of session for classification of dynamic protocols sessions." DEFVAL { 0 } ::= { rsBWMFilterEntry 25 } rsBWMFilterSessionTypeDirection OBJECT-TYPE SYNTAX INTEGER { all (0), rqst (1), rply (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The direction of the specific session type: reply or request." DEFVAL { 0 } ::= { rsBWMFilterEntry 26 } rsBWMCurrentFilterEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the filters." ::= { rsBWM 16 } rsBWMCurrentFilterEntry OBJECT-TYPE SYNTAX RsBWMCurrentFilterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentFilterName } ::= { rsBWMCurrentFilterEntryTable 1 } RsBWMCurrentFilterEntry ::= SEQUENCE { rsBWMCurrentFilterName DisplayString, rsBWMCurrentFilterDescription DisplayString, rsBWMCurrentFilterProtocol INTEGER, rsBWMCurrentFilterDestinationPort INTEGER, rsBWMCurrentFilterSourceFromPort INTEGER, rsBWMCurrentFilterSourceToPort INTEGER, rsBWMCurrentFilterOMPCOffset INTEGER, rsBWMCurrentFilterOMPCMask OCTET STRING, rsBWMCurrentFilterOMPCPattern OCTET STRING, rsBWMCurrentFilterOMPCCondition INTEGER, rsBWMCurrentFilterOMPCLength INTEGER, rsBWMCurrentFilterContentOffset INTEGER, rsBWMCurrentFilterContent DisplayString, rsBWMCurrentFilterContentType INTEGER, rsBWMCurrentFilterType INTEGER, rsBWMCurrentFilterContentEnd INTEGER, rsBWMCurrentFilterContentData DisplayString, rsBWMCurrentFilterContentCoding INTEGER, rsBWMCurrentFilterContentDataCoding INTEGER, rsBWMCurrentFilterOMPCOffsetBase INTEGER, rsBWMCurrentFilterDestinationMaxPort INTEGER, rsBWMCurrentFilterSourceAppPortGroup DisplayString, rsBWMCurrentFilterDestinationAppPortGroup DisplayString, rsBWMCurrentFilterSessionType DpsSessionType, rsBWMCurrentFilterSessionTypeDirection INTEGER } rsBWMCurrentFilterName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter object." ::= { rsBWMCurrentFilterEntry 1 } rsBWMCurrentFilterDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The description of the filter." ::= { rsBWMCurrentFilterEntry 2 } rsBWMCurrentFilterProtocol OBJECT-TYPE SYNTAX INTEGER { ip (1), tcp (2), udp (3), icmp (4), nonIp (5), icmpv6 (6), sctp(7) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol for the filter." ::= { rsBWMCurrentFilterEntry 3 } rsBWMCurrentFilterDestinationPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The initial destination port." ::= { rsBWMCurrentFilterEntry 4 } rsBWMCurrentFilterSourceFromPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The starting source port." ::= { rsBWMCurrentFilterEntry 5 } rsBWMCurrentFilterSourceToPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The last valid source port." ::= { rsBWMCurrentFilterEntry 6 } rsBWMCurrentFilterOMPCOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The offset of the OMPC data." ::= { rsBWMCurrentFilterEntry 7 } rsBWMCurrentFilterOMPCMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "The mask for the OMPC object." ::= { rsBWMCurrentFilterEntry 8 } rsBWMCurrentFilterOMPCPattern OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) ACCESS read-only STATUS mandatory DESCRIPTION "The pattern for the OMPC data." ::= { rsBWMCurrentFilterEntry 9 } rsBWMCurrentFilterOMPCCondition OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), equal (2), notEqual (3), greaterThan (4), lessThan (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition for the OMPC data check." ::= { rsBWMCurrentFilterEntry 10 } rsBWMCurrentFilterOMPCLength OBJECT-TYPE SYNTAX INTEGER { oneByte (1), twoBytes (2), threeBytes (3), fourBytes (4), notApplicable (5) } ACCESS read-only STATUS mandatory DESCRIPTION "The length of the OMPC." ::= { rsBWMCurrentFilterEntry 11 } rsBWMCurrentFilterContentOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The offset for the content." ::= { rsBWMCurrentFilterEntry 12 } rsBWMCurrentFilterContent OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The content to be checked." ::= { rsBWMCurrentFilterEntry 13 } rsBWMCurrentFilterContentType OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), url (2), text(3), hostname(4), headertype(5), expression(6), maildomain(7), mailto(8), mailfrom(9), mailsubject(10), filetype(11), cookiedata(12), idsurl(13), pop3user(14), urilength(15), ftp(16), ftpcontent(17), rpc(18), dceRPC(19), genericUrl(20), genericHeader(21), genericCookie(22), sipcallfrom(23), sipcallto(24), sipcaller(25) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of content that is used." ::= { rsBWMCurrentFilterEntry 14 } rsBWMCurrentFilterType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete." ::= { rsBWMCurrentFilterEntry 15 } rsBWMCurrentFilterContentEnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "End of search data." ::= { rsBWMCurrentFilterEntry 16 } rsBWMCurrentFilterContentData OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Additional content data, used for header type entries." ::= { rsBWMCurrentFilterEntry 17 } rsBWMCurrentFilterContentCoding OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), caseInsensitive (2), caseSensitive (3), hex (4), international(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of content coding that is used." ::= { rsBWMCurrentFilterEntry 18 } rsBWMCurrentFilterContentDataCoding OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), caseInsensitive (2), caseSensitive (3), hex (4), international(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of content data coding that is used." ::= { rsBWMCurrentFilterEntry 19 } rsBWMCurrentFilterOMPCOffsetBase OBJECT-TYPE SYNTAX INTEGER { none (0), ipHeader (1), ipData (2), tcpData (3), asn1 (4), ethernet (5), l4Header (6), ipv6Header (7) } ACCESS read-only STATUS mandatory DESCRIPTION "The base of filter OMPC offset." ::= { rsBWMCurrentFilterEntry 20 } rsBWMCurrentFilterDestinationMaxPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Maximal destination port of the range." ::= { rsBWMCurrentFilterEntry 21 } rsBWMCurrentFilterSourceAppPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The source port group." ::= { rsBWMCurrentFilterEntry 22 } rsBWMCurrentFilterDestinationAppPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination port group." ::= { rsBWMCurrentFilterEntry 23 } rsBWMCurrentFilterSessionType OBJECT-TYPE SYNTAX DpsSessionType ACCESS read-only STATUS mandatory DESCRIPTION "The type of session for classification of dynamic protocols sessions." ::= { rsBWMCurrentFilterEntry 24 } rsBWMCurrentFilterSessionTypeDirection OBJECT-TYPE SYNTAX INTEGER { all (0), rqst (1), rply (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of session for classification of dynamic protocols sessions." ::= { rsBWMCurrentFilterEntry 25 } rsBWMFilterGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMFilterGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing groups of filters." ::= { rsBWM 17 } rsBWMFilterGroup OBJECT-TYPE SYNTAX RsBWMFilterGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMFilterGroupName, rsBWMFilterEntryName } ::= { rsBWMFilterGroupTable 1 } RsBWMFilterGroup ::= SEQUENCE { rsBWMFilterGroupName DisplayString, rsBWMFilterEntryName DisplayString, rsBWMFilterGroupType INTEGER, rsBWMFilterGroupStatus RowStatus } rsBWMFilterGroupName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the group entry." ::= { rsBWMFilterGroup 1 } rsBWMFilterEntryName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter entry in the group." ::= { rsBWMFilterGroup 2 } rsBWMFilterGroupType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete." DEFVAL { 1 } ::= { rsBWMFilterGroup 3 } rsBWMFilterGroupStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the object." ::= { rsBWMFilterGroup 4 } rsBWMCurrentFilterGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentFilterGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing groups of filters." ::= { rsBWM 18 } rsBWMCurrentFilterGroup OBJECT-TYPE SYNTAX RsBWMCurrentFilterGroup ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentFilterGroupName, rsBWMCurrentFilterEntryName } ::= { rsBWMCurrentFilterGroupTable 1 } RsBWMCurrentFilterGroup ::= SEQUENCE { rsBWMCurrentFilterGroupName DisplayString, rsBWMCurrentFilterEntryName DisplayString, rsBWMCurrentFilterGroupType INTEGER } rsBWMCurrentFilterGroupName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the group entry." ::= { rsBWMCurrentFilterGroup 1 } rsBWMCurrentFilterEntryName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter entry in the group." ::= { rsBWMCurrentFilterGroup 2 } rsBWMCurrentFilterGroupType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of object. This can be regular (user defined) or static (defined by the application). ids and idsStatic are obsolete." ::= { rsBWMCurrentFilterGroup 3 } rsBWMFilterPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMFilterPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the set of filters and group filters - used by rule." ::= { rsBWM 19 } rsBWMFilterPolicyEntry OBJECT-TYPE SYNTAX RsBWMFilterPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMFilterPolicyName, rsBWMFilterPolicyEntryName } ::= { rsBWMFilterPolicyTable 1 } RsBWMFilterPolicyEntry ::= SEQUENCE { rsBWMFilterPolicyName DisplayString, rsBWMFilterPolicyEntryName DisplayString, rsBWMFilterPolicyType INTEGER, rsBWMFilterPolicyStatus RowStatus, rsBWMFilterPolicyEntryType INTEGER } rsBWMFilterPolicyName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter policy." ::= { rsBWMFilterPolicyEntry 1 } rsBWMFilterPolicyEntryName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter entry. This can either be a group or a filter. The device will resolve the type - i.e. filter or group." ::= { rsBWMFilterPolicyEntry 2 } rsBWMFilterPolicyType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes the type of the filter policy. ids and idsStatic are obsolete." DEFVAL { 1 } ::= { rsBWMFilterPolicyEntry 3 } rsBWMFilterPolicyStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the object." ::= { rsBWMFilterPolicyEntry 4 } rsBWMFilterPolicyEntryType OBJECT-TYPE SYNTAX INTEGER { basic (1), advanced (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes the type of this filter in the policy." DEFVAL { 1 } ::= { rsBWMFilterPolicyEntry 5 } rsBWMCurrentFilterPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentFilterPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the current set of filters and group filters - used by rule." ::= { rsBWM 20 } rsBWMCurrentFilterPolicyEntry OBJECT-TYPE SYNTAX RsBWMCurrentFilterPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentFilterPolicyName, rsBWMCurrentFilterPolicyEntryName } ::= { rsBWMCurrentFilterPolicyTable 1 } RsBWMCurrentFilterPolicyEntry ::= SEQUENCE { rsBWMCurrentFilterPolicyName DisplayString, rsBWMCurrentFilterPolicyEntryName DisplayString, rsBWMCurrentFilterPolicyType INTEGER, rsBWMCurrentFilterPolicyEntryType INTEGER } rsBWMCurrentFilterPolicyName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter policy." ::= { rsBWMCurrentFilterPolicyEntry 1 } rsBWMCurrentFilterPolicyEntryName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the filter entry. This can either be a group or a filter. The device will resolve the type - i.e. filter or group." ::= { rsBWMCurrentFilterPolicyEntry 2 } rsBWMCurrentFilterPolicyType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the type of the filter policy. ids and idsStatic are obsolete." ::= { rsBWMCurrentFilterPolicyEntry 3 } rsBWMCurrentFilterPolicyEntryType OBJECT-TYPE SYNTAX INTEGER { basic (1), advanced (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the type of this filter in the policy." ::= { rsBWMCurrentFilterPolicyEntry 4 } rsBWMApplicationClassification OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Defines the nature of the application classification. Enable entails that the client entry is classified and the rule is appended to the client table. Disable implies that the data will be classified in the forwarding table. That is, each packet for the client entry will be classified." ::= { rsBWM 21 } rsBWMPortBandwidthEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPortBandwidthEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the bandwidth for each port." ::= { rsBWM 22 } rsBWMPortBandwidthEntry OBJECT-TYPE SYNTAX RsBWMPortBandwidthEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMPortIndex } ::= { rsBWMPortBandwidthEntryTable 1 } RsBWMPortBandwidthEntry ::= SEQUENCE { rsBWMPortIndex INTEGER, rsBWMPortBandwidth Integer32, rsBwmPortUsedBandwidth Integer32 } rsBWMPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the bandwidths." ::= { rsBWMPortBandwidthEntry 1 } rsBWMPortBandwidth OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The bandwidth of the specific port." ::= { rsBWMPortBandwidthEntry 2 } rsBwmPortUsedBandwidth OBJECT-TYPE SYNTAX Integer32 ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth of the specific port." ::= { rsBWMPortBandwidthEntry 3 } rsBWMTuning OBJECT IDENTIFIER ::= { rsBWM 23 } rsBWMPolicyTuning OBJECT IDENTIFIER ::= { rsBWMTuning 1 } rsBWMPolicyEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of policy entries." ::= { rsBWMPolicyTuning 1 } rsBWMPolicyEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of policy entries." ::= { rsBWMPolicyTuning 2 } rsBWMPolicyLeavesPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of policy leaves." ::= { rsBWMPolicyTuning 3 } rsBWMPolicyLeavesPercentAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of policy leaves." ::= { rsBWMPolicyTuning 4 } rsBWMNetworkTuning OBJECT IDENTIFIER ::= { rsBWMTuning 2 } rsBWMNetworkEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of network entries." ::= { rsBWMNetworkTuning 1 } rsBWMNetworkEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of network entries." ::= { rsBWMNetworkTuning 2 } rsBWMFilterTuning OBJECT IDENTIFIER ::= { rsBWMTuning 3 } rsBWMFilterEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of filter entries." ::= { rsBWMFilterTuning 1 } rsBWMFilterEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of filter entries." ::= { rsBWMFilterTuning 2 } rsBWMAdvancedTuning OBJECT IDENTIFIER ::= { rsBWMTuning 4 } rsBWMAdvancedEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of advanced entries." ::= { rsBWMAdvancedTuning 1 } rsBWMAdvancedEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of advanced entries." ::= { rsBWMAdvancedTuning 2 } rsBWMGroupTuning OBJECT IDENTIFIER ::= { rsBWMTuning 5 } rsBWMGroupEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of group entries." ::= { rsBWMGroupTuning 1 } rsBWMGroupEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of group entries." ::= { rsBWMGroupTuning 2 } rsBWMDestinationTuning OBJECT IDENTIFIER ::= { rsBWMTuning 6 } rsBWMDestinationEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of destination entries." ::= { rsBWMDestinationTuning 1 } rsBWMDestinationEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of destination entries." ::= { rsBWMDestinationTuning 2 } rsBWMSessionTuning OBJECT IDENTIFIER ::= { rsBWMTuning 7 } rsBWMSessionEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of session table." ::= { rsBWMSessionTuning 1 } rsBWMSessionEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of session table entries." ::= { rsBWMSessionTuning 2 } rsBWMChainTuning OBJECT IDENTIFIER ::= { rsBWMTuning 8 } rsBWMMaxChainPolicies OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of chain (farm cluster) policies." ::= { rsBWMChainTuning 1 } rsBWMMaxChainPoliciesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum number of chain (farm cluster) policies." ::= { rsBWMChainTuning 2 } rsBWMDSCPEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMDSCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing priority and bandwidth for each DSCP." ::= { rsBWM 24 } rsBWMDSCPEntry OBJECT-TYPE SYNTAX RsBWMDSCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMDSCP } ::= { rsBWMDSCPEntryTable 1 } RsBWMDSCPEntry ::= SEQUENCE { rsBWMDSCP INTEGER, rsBWMDSCPPriority INTEGER, rsBWMDSCPGuaranteedBW Integer32, rsBWMDSCPMaxBW Integer32 } rsBWMDSCP OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-only STATUS mandatory DESCRIPTION "The DSCP - the value of DiffServ field in the IP header." ::= { rsBWMDSCPEntry 1 } rsBWMDSCPPriority OBJECT-TYPE SYNTAX INTEGER (65535 | 0..7) ACCESS read-write STATUS mandatory DESCRIPTION "The priority of the packets with the specified DSCP." DEFVAL { 0 } ::= { rsBWMDSCPEntry 2 } rsBWMDSCPGuaranteedBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The bandwidth allocated for the specified DSCP." ::= { rsBWMDSCPEntry 3 } rsBWMDSCPMaxBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "The maximum bandwidth for the specified DSCP." ::= { rsBWMDSCPEntry 4 } rsBWMCurrentDSCPEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentDSCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing priority and bandwidth for each DSCP." ::= { rsBWM 25 } rsBWMCurrentDSCPEntry OBJECT-TYPE SYNTAX RsBWMCurrentDSCPEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentDSCP } ::= { rsBWMCurrentDSCPEntryTable 1 } RsBWMCurrentDSCPEntry ::= SEQUENCE { rsBWMCurrentDSCP INTEGER, rsBWMCurrentDSCPPriority INTEGER, rsBWMCurrentDSCPGuaranteedBW Counter, rsBWMCurrentDSCPMaxBW Counter } rsBWMCurrentDSCP OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-only STATUS mandatory DESCRIPTION "The DSCP - the value of DiffServ field in the IP header." ::= { rsBWMCurrentDSCPEntry 1 } rsBWMCurrentDSCPPriority OBJECT-TYPE SYNTAX INTEGER (65535 | 0..7) ACCESS read-only STATUS mandatory DESCRIPTION "The priority of the packets with the specified DSCP." ::= { rsBWMCurrentDSCPEntry 2 } rsBWMCurrentDSCPGuaranteedBW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth allocated for the specified DSCP." ::= { rsBWMCurrentDSCPEntry 3 } rsBWMCurrentDSCPMaxBW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The maximum bandwidth for the specified DSCP." ::= { rsBWMCurrentDSCPEntry 4 } rsBWMVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "The current QoS software version." ::= { rsBWM 26 } rsBWMBwmPortOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMBwmPortOperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the operation for each port." ::= { rsBWM 27 } rsBWMBwmPortOperationEntry OBJECT-TYPE SYNTAX RsBWMBwmPortOperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMBwmInboundPort, rsBWMBwmOutboundPort } ::= { rsBWMBwmPortOperationTable 1 } RsBWMBwmPortOperationEntry ::= SEQUENCE { rsBWMBwmInboundPort INTEGER, rsBWMBwmOutboundPort INTEGER, rsBWMBwmDirection INTEGER, rsBWMBwmOperationStatus RowStatus } rsBWMBwmInboundPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the inbound port." ::= { rsBWMBwmPortOperationEntry 1 } rsBWMBwmOutboundPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the outbound port." ::= { rsBWMBwmPortOperationEntry 2 } rsBWMBwmDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." DEFVAL { 1 } ::= { rsBWMBwmPortOperationEntry 3 } rsBWMBwmOperationStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the current entry. " ::= { rsBWMBwmPortOperationEntry 4 } rsBWMBwmVLANOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMBwmVLANOperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the operation for each VLAN." ::= { rsBWM 28 } rsBWMBwmVLANOperationEntry OBJECT-TYPE SYNTAX RsBWMBwmVLANOperationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMBwmVLAN} ::= { rsBWMBwmVLANOperationTable 1 } RsBWMBwmVLANOperationEntry ::= SEQUENCE { rsBWMBwmVLAN INTEGER, rsBWMBwmVLANOperationStatus RowStatus } rsBWMBwmVLAN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The VLAN." ::= { rsBWMBwmVLANOperationEntry 1 } rsBWMBwmVLANOperationStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the current entry. " ::= { rsBWMBwmVLANOperationEntry 2 } rsBWMSessionAgingTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Obsolete mib id." ::= {rsBWM 29} rsBWMStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing statistics data for rules" ::= {rsBWM 30} rsBWMStatisticsEntry OBJECT-TYPE SYNTAX RsBWMStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMStatisticsPolicyName } ::= { rsBWMStatisticsTable 1 } RsBWMStatisticsEntry ::= SEQUENCE { rsBWMStatisticsPolicyName DisplayString, rsBWMStatisticsBandwidthUsedLastSec Counter, rsBWMStatisticsPacketNumberLastSec Counter, rsBWMStatisticsFullQueueFailuresBWLastSec Counter, rsBWMStatisticsAgedPacketsFailuresBWLastSec Counter, rsBWMStatisticsGuaranteedReachedLastSec TruthValue, rsBWMStatisticsMaximumReachedLastSec TruthValue, rsBWMStatisticsBandwidthUsedLastPeriod Counter, rsBWMStatisticsPeakBandwidthLastPeriod Counter, rsBWMStatisticsPacketNumberLastPeriod Counter, rsBWMStatisticsFullQueueFailuresBWLastPeriod Counter, rsBWMStatisticsAgedPacketsFailuresBWLastPeriod Counter, rsBWMStatisticsGuaranteedReachedCounterLastPeriod INTEGER, rsBWMStatisticsMaximumReachedCounterLastPeriod INTEGER, rsBWMStatisticsMatchedBandwidthLastSec Counter, rsBWMStatisticsMatchedBandwidthLastPeriod Counter, rsBWMStatisticsInboundBandwidthUsedLastSec Counter, rsBWMStatisticsInboundBandwidthUsedLastPeriod Counter, rsBWMStatisticsInboundMatchedBandwidthLastSec Counter, rsBWMStatisticsInboundMatchedBandwidthLastPeriod Counter, rsBWMStatisticsInboundPacketNumberLastSec Counter, rsBWMStatisticsInboundPacketNumberLastPeriod Counter, rsBWMStatisticsOutboundBandwidthUsedLastSec Counter, rsBWMStatisticsOutboundBandwidthUsedLastPeriod Counter, rsBWMStatisticsOutboundMatchedBandwidthLastSec Counter, rsBWMStatisticsOutboundMatchedBandwidthLastPeriod Counter, rsBWMStatisticsOutboundPacketNumberLastSec Counter, rsBWMStatisticsOutboundPacketNumberLastPeriod Counter, rsBWMStatisticsNewTCPConnectionsLastSec Counter, rsBWMStatisticsNewTCPConnectionsLastPeriod Counter, rsBWMStatisticsNewUDPConnectionsLastSec Counter, rsBWMStatisticsNewUDPConnectionsLastPeriod Counter, rsBWMStatisticsQueuedBWLastSec Counter, rsBWMStatisticsQueuedBWLastPeriod Counter } rsBWMStatisticsPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the rule." ::= {rsBWMStatisticsEntry 1} rsBWMStatisticsBandwidthUsedLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth used by the rule in the last second." ::= {rsBWMStatisticsEntry 2} rsBWMStatisticsPacketNumberLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that match the rule in the last second." ::= {rsBWMStatisticsEntry 3} rsBWMStatisticsFullQueueFailuresBWLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of bandwidth that the device failed to allocate in the last second." ::= {rsBWMStatisticsEntry 4} rsBWMStatisticsAgedPacketsFailuresBWLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of bandwidth that the device failed to allocate in the last second, since the packets were discarded because of aging." ::= {rsBWMStatisticsEntry 5} rsBWMStatisticsGuaranteedReachedLastSec OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Whether the guaranteed bandwidth threshold was reached in the last second." ::= {rsBWMStatisticsEntry 6} rsBWMStatisticsMaximumReachedLastSec OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the maximum bandwidth threshold was reached in the last second." ::= {rsBWMStatisticsEntry 7} rsBWMStatisticsBandwidthUsedLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth used by the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsEntry 8} rsBWMStatisticsPeakBandwidthLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The highest bandwidth in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsEntry 9} rsBWMStatisticsPacketNumberLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that match the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsEntry 10} rsBWMStatisticsFullQueueFailuresBWLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of bandwidth that the device failed to allocate in the last sampling period defined in rsBWMStatisticsReportingPeriod, because the queue was full." ::= {rsBWMStatisticsEntry 11} rsBWMStatisticsAgedPacketsFailuresBWLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of bandwidth that the device failed to allocate in the last sampling period defined in rsBWMStatisticsReportingPeriod, since the packets were discarded because of aging." ::= {rsBWMStatisticsEntry 12} rsBWMStatisticsGuaranteedReachedCounterLastPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the guaranteed bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsEntry 13} rsBWMStatisticsMaximumReachedCounterLastPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the maximum bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsEntry 14} rsBWMStatisticsMatchedBandwidthLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The matched bandwidth in the last second." ::= {rsBWMStatisticsEntry 15} rsBWMStatisticsMatchedBandwidthLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The matched bandwidth in the last sampling period." ::= {rsBWMStatisticsEntry 16} rsBWMStatisticsInboundBandwidthUsedLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound bandwidth used by the rule in the last second." ::= {rsBWMStatisticsEntry 17} rsBWMStatisticsInboundBandwidthUsedLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound bandwidth used by the rule in the last sampling period." ::= {rsBWMStatisticsEntry 18} rsBWMStatisticsInboundMatchedBandwidthLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound matched bandwidth in the last second." ::= {rsBWMStatisticsEntry 19} rsBWMStatisticsInboundMatchedBandwidthLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound matched bandwidth in the last sampling period." ::= {rsBWMStatisticsEntry 20} rsBWMStatisticsInboundPacketNumberLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets that match the rule in the last second." ::= {rsBWMStatisticsEntry 21} rsBWMStatisticsInboundPacketNumberLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets that match the rule in the last sampling period." ::= {rsBWMStatisticsEntry 22} rsBWMStatisticsOutboundBandwidthUsedLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound bandwidth used by the rule in the last second ." ::= {rsBWMStatisticsEntry 23} rsBWMStatisticsOutboundBandwidthUsedLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound bandwidth used by the rule in the last sampling period." ::= {rsBWMStatisticsEntry 24} rsBWMStatisticsOutboundMatchedBandwidthLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound matched bandwidth in the last second." ::= {rsBWMStatisticsEntry 25} rsBWMStatisticsOutboundMatchedBandwidthLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound matched bandwidth in the last sampling period." ::= {rsBWMStatisticsEntry 26} rsBWMStatisticsOutboundPacketNumberLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that match the rule in the last second." ::= {rsBWMStatisticsEntry 27} rsBWMStatisticsOutboundPacketNumberLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that match the rule in the last sampling period." ::= {rsBWMStatisticsEntry 28} rsBWMStatisticsNewTCPConnectionsLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new TCP connections in the last second." ::= {rsBWMStatisticsEntry 29} rsBWMStatisticsNewTCPConnectionsLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new TCP connections in the last sampling period." ::= {rsBWMStatisticsEntry 30} rsBWMStatisticsNewUDPConnectionsLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new UDP connections in the last second." ::= {rsBWMStatisticsEntry 31} rsBWMStatisticsNewUDPConnectionsLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new UDP connections in the last sampling period." ::= {rsBWMStatisticsEntry 32} rsBWMStatisticsQueuedBWLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of queued bandwidth in the last second." ::= {rsBWMStatisticsEntry 33} rsBWMStatisticsQueuedBWLastPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of queued bandwidth in the last sampling period." ::= {rsBWMStatisticsEntry 34} rsBWMStatisticsMonitorPolicy OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether the device will gather policies' statistics." DEFVAL { 2 } ::= {rsBWMStatisticsTable 2} rsBWMStatisticsTableUseSRP OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether the device will send the data to ConfigWare using SRP." DEFVAL { false } ::= {rsBWMStatisticsTable 3} rsBWMStatisticsReportingPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates reporting frequency (in seconds) using SRP for BWM." DEFVAL { 60 } ::= {rsBWMStatisticsTable 4} rsBWMSamplingRatio OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sampling ratio: one of how many packets is sampled." DEFVAL {100} ::= {rsBWM 31} rsBWMSamplerOverloadMode OBJECT-TYPE SYNTAX INTEGER { forward(1), discard(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Overload mechanism mode: forward/discard excess traffic." DEFVAL {forward} ::= {rsBWM 32} rsBWMChainRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMChainRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of chain rules for classifer data base, these rules can be used to classify packets for chaining." ::= {rsBWM 33} rsBWMChainRulesEntry OBJECT-TYPE SYNTAX RsBWMChainRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMChainRulesName } ::= { rsBWMChainRulesTable 1 } RsBWMChainRulesEntry ::= SEQUENCE { rsBWMChainRulesIndex INTEGER, rsBWMChainRulesName DisplayString, rsBWMChainRulesDestination DisplayString, rsBWMChainRulesSource DisplayString, rsBWMChainRulesStatus RowStatus, rsBWMChainRulesDirection INTEGER, rsBWMChainRulesDescription DisplayString, rsBWMChainRulesPolicyType INTEGER, rsBWMChainRulesPolicy DisplayString, rsBWMChainRulesOperationalStatus INTEGER, rsBWMChainRulesSpecific DisplayString, rsBWMChainRulesPhysicalPortGroup DisplayString, rsBWMChainRulesVLANTagGroup DisplayString, rsBWMChainRulesDSCPMarking INTEGER, rsBWMChainRulesRadiusRule DisplayString } rsBWMChainRulesIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the rules." DEFVAL { 1 } ::= { rsBWMChainRulesEntry 1 } rsBWMChainRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMChainRulesEntry 2} rsBWMChainRulesDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMChainRulesEntry 3} rsBWMChainRulesSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMChainRulesEntry 4} rsBWMChainRulesStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMChainRulesEntry 5 } rsBWMChainRulesDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." DEFVAL { 1 } ::= { rsBWMChainRulesEntry 6 } rsBWMChainRulesDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "Description." ::= { rsBWMChainRulesEntry 7 } rsBWMChainRulesPolicyType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-write STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMChainRulesEntry 8 } rsBWMChainRulesPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMChainRulesEntry 9 } rsBWMChainRulesOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if the rule is active or inactive. The active rule table contains only active rules." DEFVAL { 1 } ::= { rsBWMChainRulesEntry 10 } rsBWMChainRulesSpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMChainRulesEntry 11 } rsBWMChainRulesPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the physical port group for this rule." ::= { rsBWMChainRulesEntry 12 } rsBWMChainRulesVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMChainRulesEntry 13 } rsBWMChainRulesDSCPMarking OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed." DEFVAL { -1 } ::= { rsBWMChainRulesEntry 14 } rsBWMChainRulesRadiusRule OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table" DEFVAL { "any" } ::= {rsBWMChainRulesEntry 15} rsBWMCurrentChainRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentChainRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of chain rules for classifer data base, these rules can be used to classify packets for chaining." ::= {rsBWM 34} rsBWMCurrentChainRulesEntry OBJECT-TYPE SYNTAX RsBWMCurrentChainRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentChainRulesName } ::= { rsBWMCurrentChainRulesTable 1 } RsBWMCurrentChainRulesEntry ::= SEQUENCE { rsBWMCurrentChainRulesIndex INTEGER, rsBWMCurrentChainRulesName DisplayString, rsBWMCurrentChainRulesDestination DisplayString, rsBWMCurrentChainRulesSource DisplayString, rsBWMCurrentChainRulesDirection INTEGER, rsBWMCurrentChainRulesDescription DisplayString, rsBWMCurrentChainRulesPolicyType INTEGER, rsBWMCurrentChainRulesPolicy DisplayString, rsBWMCurrentChainRulesSpecific DisplayString, rsBWMCurrentChainBandwidthLastSec Counter, rsBWMCurrentChainPacketsLastSec Counter, rsBWMCurrentChainRulesPhysicalPortGroup DisplayString, rsBWMCurrentChainRulesVLANTagGroup DisplayString, rsBWMCurrentChainRulesDSCPMarking INTEGER, rsBWMCurrentChainRulesRadiusRule DisplayString } rsBWMCurrentChainRulesIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determine the order of the rules." ::= { rsBWMCurrentChainRulesEntry 1 } rsBWMCurrentChainRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMCurrentChainRulesEntry 2} rsBWMCurrentChainRulesDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMCurrentChainRulesEntry 3} rsBWMCurrentChainRulesSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMCurrentChainRulesEntry 4} rsBWMCurrentChainRulesDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." ::= { rsBWMCurrentChainRulesEntry 5 } rsBWMCurrentChainRulesDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Description." ::= { rsBWMCurrentChainRulesEntry 6 } rsBWMCurrentChainRulesPolicyType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-only STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMCurrentChainRulesEntry 7 } rsBWMCurrentChainRulesPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMCurrentChainRulesEntry 8 } rsBWMCurrentChainRulesSpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMCurrentChainRulesEntry 9 } rsBWMCurrentChainBandwidthLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth used by the policy in the last second." ::= {rsBWMCurrentChainRulesEntry 10} rsBWMCurrentChainPacketsLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The packets that matched the policy in the last second." ::= {rsBWMCurrentChainRulesEntry 11} rsBWMCurrentChainRulesPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This name of the physical port group for this rule." ::= { rsBWMCurrentChainRulesEntry 12 } rsBWMCurrentChainRulesVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMCurrentChainRulesEntry 13 } rsBWMCurrentChainRulesDSCPMarking OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed." ::= { rsBWMCurrentChainRulesEntry 14 } rsBWMCurrentChainRulesRadiusRule OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the radius rule this session belongs to. This field is relevant only for cid. Radius rules' names can be found in the Radius Rules Table" DEFVAL { "any" } ::= {rsBWMCurrentChainRulesEntry 15} rsBWMPPCInboundPortOnlyTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPPCInboundPortOnlyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the operation for each inbound port (and not for port pairs)." ::= { rsBWM 35 } rsBWMPPCInboundPortOnlyEntry OBJECT-TYPE SYNTAX RsBWMPPCInboundPortOnlyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMPPCInboundPort } ::= { rsBWMPPCInboundPortOnlyTable 1 } RsBWMPPCInboundPortOnlyEntry ::= SEQUENCE { rsBWMPPCInboundPort INTEGER, rsBWMPPCOperationStatus RowStatus } rsBWMPPCInboundPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the inbound port." ::= { rsBWMPPCInboundPortOnlyEntry 1 } rsBWMPPCOperationStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the current entry. " ::= { rsBWMPPCInboundPortOnlyEntry 2 } rsBWMPhysicalPortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPhysicalPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the entries of physical port groups." ::= { rsBWM 36 } rsBWMPhysicalPortGroupEntry OBJECT-TYPE SYNTAX RsBWMPhysicalPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMPhysicalPortGroupName, rsBWMPhysicalPortGroupPort } ::= { rsBWMPhysicalPortGroupTable 1 } RsBWMPhysicalPortGroupEntry ::= SEQUENCE { rsBWMPhysicalPortGroupName DisplayString, rsBWMPhysicalPortGroupPort INTEGER, rsBWMPhysicalPortGroupOperationStatus RowStatus } rsBWMPhysicalPortGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the entry." ::= { rsBWMPhysicalPortGroupEntry 1 } rsBWMPhysicalPortGroupPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The inbound port." ::= { rsBWMPhysicalPortGroupEntry 2 } rsBWMPhysicalPortGroupOperationStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the current entry. " ::= { rsBWMPhysicalPortGroupEntry 3 } rsBWMCurrentPhysicalPortGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentPhysicalPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the entries of current physical port groups." ::= { rsBWM 37 } rsBWMCurrentPhysicalPortGroupEntry OBJECT-TYPE SYNTAX RsBWMCurrentPhysicalPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentPhysicalPortGroupName, rsBWMCurrentPhysicalPortGroupPort } ::= { rsBWMCurrentPhysicalPortGroupTable 1 } RsBWMCurrentPhysicalPortGroupEntry ::= SEQUENCE { rsBWMCurrentPhysicalPortGroupName DisplayString, rsBWMCurrentPhysicalPortGroupPort INTEGER } rsBWMCurrentPhysicalPortGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the entry." ::= { rsBWMCurrentPhysicalPortGroupEntry 1 } rsBWMCurrentPhysicalPortGroupPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The inbound port." ::= { rsBWMCurrentPhysicalPortGroupEntry 2 } rsBWMContentTuning OBJECT IDENTIFIER ::= { rsBWMTuning 9 } rsBWMContentEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of content entries." ::= { rsBWMContentTuning 1 } rsBWMContentEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of content entries." ::= { rsBWMContentTuning 2 } rsBWMNetworkIPTuning OBJECT IDENTIFIER ::= { rsBWMTuning 10 } rsBWMNetworkIPHashEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries in discrete IPs hash per network." ::= { rsBWMNetworkIPTuning 1 } rsBWMNetworkIPHashEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of entries in discrete IPs hash per network." ::= { rsBWMNetworkIPTuning 2 } rsBWMNetworkRangeTuning OBJECT IDENTIFIER ::= { rsBWMTuning 11 } rsBWMNetworkRangeEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of ranges per network." ::= { rsBWMNetworkRangeTuning 1 } rsBWMNetworkRangeEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of ranges per network." ::= { rsBWMNetworkRangeTuning 2 } rsBWMFarmRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMFarmRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of farm rules for classifer data base, these rules can be used to classify packets for farm." ::= {rsBWM 38} rsBWMFarmRulesEntry OBJECT-TYPE SYNTAX RsBWMFarmRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMFarmRulesName } ::= { rsBWMFarmRulesTable 1 } RsBWMFarmRulesEntry ::= SEQUENCE { rsBWMFarmRulesIndex INTEGER, rsBWMFarmRulesName DisplayString, rsBWMFarmRulesDestination DisplayString, rsBWMFarmRulesSource DisplayString, rsBWMFarmRulesStatus RowStatus, rsBWMFarmRulesDirection INTEGER, rsBWMFarmRulesDescription DisplayString, rsBWMFarmRulesPolicyType INTEGER, rsBWMFarmRulesPolicy DisplayString, rsBWMFarmRulesOperationalStatus INTEGER, rsBWMFarmRulesSpecific DisplayString, rsBWMFarmRulesPhysicalPortGroup DisplayString, rsBWMFarmRulesVLANTagGroup DisplayString, rsBWMFarmRulesDSCPMarking INTEGER } rsBWMFarmRulesIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the rules." ::= { rsBWMFarmRulesEntry 1 } rsBWMFarmRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMFarmRulesEntry 2} rsBWMFarmRulesDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMFarmRulesEntry 3} rsBWMFarmRulesSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMFarmRulesEntry 4} rsBWMFarmRulesStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMFarmRulesEntry 5 } rsBWMFarmRulesDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." DEFVAL { 2 } ::= { rsBWMFarmRulesEntry 6 } rsBWMFarmRulesDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "Description." ::= { rsBWMFarmRulesEntry 7 } rsBWMFarmRulesPolicyType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-write STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMFarmRulesEntry 8 } rsBWMFarmRulesPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMFarmRulesEntry 9 } rsBWMFarmRulesOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if the rule is active or inactive. The active rule table contains only active rules." DEFVAL { 1 } ::= { rsBWMFarmRulesEntry 10 } rsBWMFarmRulesSpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMFarmRulesEntry 11 } rsBWMFarmRulesPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "This name of the physical port group for this rule." ::= { rsBWMFarmRulesEntry 12 } rsBWMFarmRulesVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMFarmRulesEntry 13 } rsBWMFarmRulesDSCPMarking OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed." ::= { rsBWMFarmRulesEntry 14 } rsBWMCurrentFarmRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentFarmRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of chain rules for classifer data base, these rules can be used to classify packets for chaining." ::= {rsBWM 39} rsBWMCurrentFarmRulesEntry OBJECT-TYPE SYNTAX RsBWMCurrentFarmRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentFarmRulesName } ::= { rsBWMCurrentFarmRulesTable 1 } RsBWMCurrentFarmRulesEntry ::= SEQUENCE { rsBWMCurrentFarmRulesIndex INTEGER, rsBWMCurrentFarmRulesName DisplayString, rsBWMCurrentFarmRulesDestination DisplayString, rsBWMCurrentFarmRulesSource DisplayString, rsBWMCurrentFarmRulesDirection INTEGER, rsBWMCurrentFarmRulesDescription DisplayString, rsBWMCurrentFarmRulesPolicyType INTEGER, rsBWMCurrentFarmRulesPolicy DisplayString, rsBWMCurrentFarmRulesSpecific DisplayString, rsBWMCurrentFarmBandwidthLastSec Counter, rsBWMCurrentFarmPacketsLastSec Counter, rsBWMCurrentFarmRulesPhysicalPortGroup DisplayString, rsBWMCurrentFarmRulesVLANTagGroup DisplayString, rsBWMCurrentFarmRulesDSCPMarking INTEGER } rsBWMCurrentFarmRulesIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determine the order of the rules." ::= { rsBWMCurrentFarmRulesEntry 1 } rsBWMCurrentFarmRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMCurrentFarmRulesEntry 2} rsBWMCurrentFarmRulesDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMCurrentFarmRulesEntry 3} rsBWMCurrentFarmRulesSource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." ::= {rsBWMCurrentFarmRulesEntry 4} rsBWMCurrentFarmRulesDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." ::= { rsBWMCurrentFarmRulesEntry 5 } rsBWMCurrentFarmRulesDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Description." ::= { rsBWMCurrentFarmRulesEntry 6 } rsBWMCurrentFarmRulesPolicyType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-only STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMCurrentFarmRulesEntry 7 } rsBWMCurrentFarmRulesPolicy OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMCurrentFarmRulesEntry 8 } rsBWMCurrentFarmRulesSpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMCurrentFarmRulesEntry 9 } rsBWMCurrentFarmBandwidthLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth used by the policy in the last second." ::= {rsBWMCurrentFarmRulesEntry 10} rsBWMCurrentFarmPacketsLastSec OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The packets that matched the policy in the last second." ::= {rsBWMCurrentFarmRulesEntry 11} rsBWMCurrentFarmRulesPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "This name of the physical port group for this rule." ::= { rsBWMCurrentFarmRulesEntry 12 } rsBWMCurrentFarmRulesVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMCurrentFarmRulesEntry 13 } rsBWMCurrentFarmRulesDSCPMarking OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the DSCP value to mark the ToS field in the IP header in the matching packets. If equals -1, the marking is not performed." ::= { rsBWMCurrentFarmRulesEntry 14 } rsBWMDynamicNetworkTuning OBJECT IDENTIFIER ::= { rsBWMTuning 12 } rsBWMDynamicNetworkEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of dynamic network entries." ::= { rsBWMDynamicNetworkTuning 1 } rsBWMDynamicNetworkEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of dynamic network entries." ::= { rsBWMDynamicNetworkTuning 2 } rsBWMDynamicNetworkIPTuning OBJECT IDENTIFIER ::= { rsBWMTuning 13 } rsBWMDynamicNetworkIPHashEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries in discrete IPs hash per dynamic network." ::= { rsBWMDynamicNetworkIPTuning 1 } rsBWMDynamicNetworkIPHashEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of entries in discrete IPs hash per dynamic network." ::= { rsBWMDynamicNetworkIPTuning 2 } rsBWMDynamicNetworkRangeTuning OBJECT IDENTIFIER ::= { rsBWMTuning 14 } rsBWMDynamicNetworkRangeEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of ranges per dynamic network." ::= { rsBWMDynamicNetworkRangeTuning 1 } rsBWMDynamicNetworkRangeEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum maximum number of ranges per dynamic network." ::= { rsBWMDynamicNetworkRangeTuning 2 } rsBWMOMPCHashTableOffset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The offset of the OMPC hash table." ::= {rsBWM 40} rsBWMOMPCHashTableMask OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The mask of the OMPC hash table." ::= {rsBWM 41} rsBWMNoSaveMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates if BWM data structures are stored in CDB (disable) or in cdbbuf(enable)." DEFVAL {disable} ::= {rsBWM 42} rsBWMStringSearchMode OBJECT-TYPE SYNTAX INTEGER { regular(1), parallel(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates if regular string search is used in the content module." ::= {rsBWM 46} rsBWMMacGroupTuning OBJECT IDENTIFIER ::= { rsBWMTuning 15 } rsBWMMacGroupEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Maximum number of MAC address groups." ::= { rsBWMMacGroupTuning 1 } rsBWMMacGroupEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "Future maximum number of MAC address groups." ::= { rsBWMMacGroupTuning 2 } rsBWMParallelStringSearchMemoryTuning OBJECT IDENTIFIER ::= { rsBWMTuning 18 } rsBWMParallelStringSearchMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum memory size for Parallel String Search." ::= { rsBWMParallelStringSearchMemoryTuning 1 } rsBWMParallelStringSearchMemoryAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum memory size for Parallel String Search." ::= { rsBWMParallelStringSearchMemoryTuning 2 } rsBWMTrafficFlowBWTuning OBJECT IDENTIFIER ::= { rsBWMTuning 19 } rsBWMTrafficFlowBWEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries in the table that keeps track of sessions for BW per Traffic Flow Support." ::= { rsBWMTrafficFlowBWTuning 1 } rsBWMTrafficFlowBWEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum number of entries in the table that keeps track of sessions for BW per Traffic Flow Support.." ::= { rsBWMTrafficFlowBWTuning 2 } rsBWMVLANTagGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMVLANTagGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table for VLAN tag groups." ::= {rsBWM 47} rsBWMVLANTagGroupEntry OBJECT-TYPE SYNTAX RsBWMVLANTagGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMVLANTagGroupName, rsBWMVLANTagGroupVLANTag, rsBWMVLANTagGroupVLANTagFrom } ::= { rsBWMVLANTagGroupTable 1} RsBWMVLANTagGroupEntry ::= SEQUENCE { rsBWMVLANTagGroupName DisplayString, rsBWMVLANTagGroupVLANTag INTEGER, rsBWMVLANTagGroupVLANTagFrom INTEGER, rsBWMVLANTagGroupVLANTagTo INTEGER, rsBWMVLANTagGroupMode INTEGER, rsBWMVLANTagGroupStatus RowStatus } rsBWMVLANTagGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the VLAN tag group." ::= { rsBWMVLANTagGroupEntry 1} rsBWMVLANTagGroupVLANTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of VLAN tag in discrete mode." ::= { rsBWMVLANTagGroupEntry 2} rsBWMVLANTagGroupVLANTagFrom OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 'from' part of the VLAN tag range." ::= { rsBWMVLANTagGroupEntry 3} rsBWMVLANTagGroupVLANTagTo OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The 'to' part of the VLAN tag range." DEFVAL { 65536 } ::= { rsBWMVLANTagGroupEntry 4} rsBWMVLANTagGroupMode OBJECT-TYPE SYNTAX INTEGER { discrete(1), range(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of the VLAN tag group: discrete or range." DEFVAL { discrete } ::= { rsBWMVLANTagGroupEntry 5} rsBWMVLANTagGroupStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The row status of the entry." ::= { rsBWMVLANTagGroupEntry 6} rsBWMCurrentVLANTagGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentVLANTagGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Current table for VLAN tag groups." ::= {rsBWM 48} rsBWMCurrentVLANTagGroupEntry OBJECT-TYPE SYNTAX RsBWMCurrentVLANTagGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentVLANTagGroupName, rsBWMCurrentVLANTagGroupVLANTag, rsBWMCurrentVLANTagGroupVLANTagFrom } ::= { rsBWMCurrentVLANTagGroupTable 1} RsBWMCurrentVLANTagGroupEntry ::= SEQUENCE { rsBWMCurrentVLANTagGroupName DisplayString, rsBWMCurrentVLANTagGroupVLANTag INTEGER, rsBWMCurrentVLANTagGroupVLANTagFrom INTEGER, rsBWMCurrentVLANTagGroupVLANTagTo INTEGER, rsBWMCurrentVLANTagGroupMode INTEGER } rsBWMCurrentVLANTagGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the VLAN tag group." ::= { rsBWMCurrentVLANTagGroupEntry 1} rsBWMCurrentVLANTagGroupVLANTag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of VLAN tag in discrete mode." ::= { rsBWMCurrentVLANTagGroupEntry 2} rsBWMCurrentVLANTagGroupVLANTagFrom OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 'from' part of the VLAN tag range." ::= { rsBWMCurrentVLANTagGroupEntry 3} rsBWMCurrentVLANTagGroupVLANTagTo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The 'to' part of the VLAN tag range." ::= { rsBWMCurrentVLANTagGroupEntry 4} rsBWMCurrentVLANTagGroupMode OBJECT-TYPE SYNTAX INTEGER { discrete(1), range(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The mode of the VLAN tag group: discrete or range." ::= { rsBWMCurrentVLANTagGroupEntry 5} rsBWMMacGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMMacGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the groups of MAC addresses." ::= {rsBWM 49} rsBWMMacGroupEntry OBJECT-TYPE SYNTAX RsBWMMacGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMMacGroupEntryName, rsBWMMacGroupEntryAddress} ::= { rsBWMMacGroupTable 1 } RsBWMMacGroupEntry ::= SEQUENCE { rsBWMMacGroupEntryName DisplayString, rsBWMMacGroupEntryAddress MacAddress, rsBWMMacGroupEntryStatus RowStatus } rsBWMMacGroupEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the MACs group." ::= { rsBWMMacGroupEntry 1 } rsBWMMacGroupEntryAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "the MAC address in the group." ::= { rsBWMMacGroupEntry 2 } rsBWMMacGroupEntryStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMMacGroupEntry 3 } rsBWMMacGroupCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMMacGroupCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the current groups of MAC addresses." ::= {rsBWM 50} rsBWMMacGroupCurrentEntry OBJECT-TYPE SYNTAX RsBWMMacGroupCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMMacGroupCurrentEntryName, rsBWMMacGroupCurrentEntryAddress} ::= { rsBWMMacGroupCurrentTable 1 } RsBWMMacGroupCurrentEntry ::= SEQUENCE { rsBWMMacGroupCurrentEntryName DisplayString, rsBWMMacGroupCurrentEntryAddress MacAddress } rsBWMMacGroupCurrentEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the MACs group." ::= { rsBWMMacGroupCurrentEntry 1 } rsBWMMacGroupCurrentEntryAddress OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "the MAC address in the group." ::= { rsBWMMacGroupCurrentEntry 2 } rsBWMQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Enables the user to configure the queue size" DEFVAL { 512 } ::= {rsBWM 51} rsBWMTrafficFlowBWAgingTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The aging time for the traffic flow BW table. After this number of seconds without activity, the session is deleted." ::= {rsBWM 52} rsBWMServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the available services." ::= {rsBWM 53} rsBWMServiceEntry OBJECT-TYPE SYNTAX RsBWMServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMServiceTableType, rsBWMServiceType, rsBWMServiceName} ::= {rsBWMServiceTable 1} RsBWMServiceEntry ::= SEQUENCE { rsBWMServiceTableType INTEGER, rsBWMServiceType INTEGER, rsBWMServiceName DisplayString } rsBWMServiceTableType OBJECT-TYPE SYNTAX INTEGER { filterActive (1), filterModify (2), advancedActive (3), advancedModify (4), groupActive (5), groupModify (6) } ACCESS read-only STATUS mandatory DESCRIPTION "The specific table to access." ::= {rsBWMServiceEntry 1} rsBWMServiceType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2), ids (3), idsStatic (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of entry. ids and idsStatic are obsolete." ::= {rsBWMServiceEntry 2} rsBWMServiceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The filter or advanced or group name (of type rsBWMServiceType)." ::= {rsBWMServiceEntry 3} rsBWMPolicyGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPolicyGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the available Policy groups." ::= {rsBWM 54} rsBWMPolicyGroupEntry OBJECT-TYPE SYNTAX RsBWMPolicyGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMPolicyGroupEntryName} ::= { rsBWMPolicyGroupTable 1 } RsBWMPolicyGroupEntry ::= SEQUENCE { rsBWMPolicyGroupEntryName DisplayString, rsBWMPolicyGroupEntryStatus RowStatus } rsBWMPolicyGroupEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Policy group." ::= { rsBWMPolicyGroupEntry 1 } rsBWMPolicyGroupEntryStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMPolicyGroupEntry 2 } rsBWMPolicyGroupCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPolicyGroupCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the current groups of classes." ::= {rsBWM 55} rsBWMPolicyGroupCurrentEntry OBJECT-TYPE SYNTAX RsBWMPolicyGroupCurrentEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMPolicyGroupCurrentEntryName} ::= { rsBWMPolicyGroupCurrentTable 1 } RsBWMPolicyGroupCurrentEntry ::= SEQUENCE { rsBWMPolicyGroupCurrentEntryName DisplayString } rsBWMPolicyGroupCurrentEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Classs group." ::= { rsBWMPolicyGroupCurrentEntry 1 } rsBWMAppPortGroupEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMAppPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the application port range." ::= { rsBWM 56 } rsBWMAppPortGroupEntry OBJECT-TYPE SYNTAX RsBWMAppPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMAppPortGroupName, rsBWMAppPortGroupFromPort, rsBWMAppPortGroupToPort} ::= { rsBWMAppPortGroupEntryTable 1 } RsBWMAppPortGroupEntry ::= SEQUENCE { rsBWMAppPortGroupName DisplayString, rsBWMAppPortGroupFromPort INTEGER, rsBWMAppPortGroupToPort INTEGER, rsBWMAppPortGroupType INTEGER, rsBWMAppPortGroupStatus RowStatus } rsBWMAppPortGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the application port range object." ::= { rsBWMAppPortGroupEntry 1 } rsBWMAppPortGroupFromPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The starting port." ::= { rsBWMAppPortGroupEntry 2 } rsBWMAppPortGroupToPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The last valid port." ::= { rsBWMAppPortGroupEntry 3 } rsBWMAppPortGroupType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of object. This can be regular (user defined) or static (defined by the application)." DEFVAL { 1 } ::= { rsBWMAppPortGroupEntry 4 } rsBWMAppPortGroupStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the object." ::= { rsBWMAppPortGroupEntry 5 } rsBWMCurrentAppPortGroupEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentAppPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the application port range." ::= { rsBWM 57 } rsBWMCurrentAppPortGroupEntry OBJECT-TYPE SYNTAX RsBWMCurrentAppPortGroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentAppPortGroupName, rsBWMCurrentAppPortGroupFromPort, rsBWMCurrentAppPortGroupToPort} ::= { rsBWMCurrentAppPortGroupEntryTable 1 } RsBWMCurrentAppPortGroupEntry ::= SEQUENCE { rsBWMCurrentAppPortGroupName DisplayString, rsBWMCurrentAppPortGroupFromPort INTEGER, rsBWMCurrentAppPortGroupToPort INTEGER, rsBWMCurrentAppPortGroupType INTEGER } rsBWMCurrentAppPortGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the application port range object." ::= { rsBWMCurrentAppPortGroupEntry 1 } rsBWMCurrentAppPortGroupFromPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The starting port." ::= { rsBWMCurrentAppPortGroupEntry 2 } rsBWMCurrentAppPortGroupToPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The last valid port." ::= { rsBWMCurrentAppPortGroupEntry 3 } rsBWMCurrentAppPortGroupType OBJECT-TYPE SYNTAX INTEGER { regular (1), static (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of object. This can be regular (user defined) or static (defined by the application)." ::= { rsBWMCurrentAppPortGroupEntry 4 } rsBWMAppPortGroupTuning OBJECT IDENTIFIER ::= { rsBWMTuning 20 } rsBWMAppPortGroupTuningEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries in application ports table." ::= { rsBWMAppPortGroupTuning 1 } rsBWMAppPortGroupTuningEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future Maximum number of entries in application ports table." ::= { rsBWMAppPortGroupTuning 2 } rsBWMDefaultGatewayClassificatiomMode OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled, BWM classification will be performed only on traffic to/from the configured default gateway." ::= { rsBWM 58 } rsBWMFarmsClassifyListsTuning OBJECT IDENTIFIER ::= { rsBWMTuning 21 } rsBWMFarmsClassifyListsTuningEntries OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of entries in the farms classification lists table (each entry holds the relevant BWM policies for a pair of farms)." ::= { rsBWMFarmsClassifyListsTuning 1 } rsBWMFarmsClassifyListsTuningEntriesAfterReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Future maximum number of entries in the farms classification lists table." ::= { rsBWMFarmsClassifyListsTuning 2 } rsBWMExtRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMExtRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the extended list of rules for classifer data base" ::= { rsBWM 59 } rsBWMExtRulesEntry OBJECT-TYPE SYNTAX RsBWMExtRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMExtRulesName } ::= { rsBWMExtRulesTable 1 } RsBWMExtRulesEntry ::= SEQUENCE { rsBWMExtRulesName DisplayString, rsBWMExtRulesFromFarm DisplayString, rsBWMExtRulesToFarm DisplayString, rsBWMExtRulesClassificationPoint INTEGER, rsBWMExtRulesTrafficIdentification INTEGER, rsBWMExtRulesTrafficFlowMaxBW INTEGER, rsBWMExtRulesMaxConcurrentSessions INTEGER, rsBWMExtRulesMaxRqstsPerSec INTEGER, rsBWMExtRulesTrafficIDCookieField DisplayString, rsBWMExtRulesStatus RowStatus, rsBWMExtRulesActivate DisplayString, rsBWMExtRulesInactivate DisplayString, rsBWMExtRulesForceBestFit INTEGER, rsBWMExtRulesPacketMarkingType INTEGER, rsBWMExtRulesPacketMarkingValue INTEGER, rsBWMExtRulesReportMaxBw INTEGER } rsBWMExtRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= { rsBWMExtRulesEntry 1 } rsBWMExtRulesFromFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The source farm of the packet for classification." ::= { rsBWMExtRulesEntry 2 } rsBWMExtRulesToFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination farm of the packet for classification." ::= { rsBWMExtRulesEntry 3 } rsBWMExtRulesClassificationPoint OBJECT-TYPE SYNTAX INTEGER { beforeChanges (1), afterChanges (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the classification will be performed on the original packet, or on the packet after all changes." DEFVAL { 2 } ::= { rsBWMExtRulesEntry 4 } rsBWMExtRulesTrafficIdentification OBJECT-TYPE SYNTAX INTEGER { none (0), client (1), session (2), connection (3), fullL4Session (4), sessionCookie (5), sipCallID (6) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates how a traffic flow is defined for this policy." ::= { rsBWMExtRulesEntry 5 } rsBWMExtRulesTrafficFlowMaxBW OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain traffic flow (session) that match this rule." ::= { rsBWMExtRulesEntry 6 } rsBWMExtRulesMaxConcurrentSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of sessions that can be open simultaneously per traffic flow." ::= { rsBWMExtRulesEntry 7 } rsBWMExtRulesMaxRqstsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of http requests that will be forwarded in a second for each traffic flow." ::= { rsBWMExtRulesEntry 8 } rsBWMExtRulesTrafficIDCookieField OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of cookie field for Traafic Flow ID by cookie." ::= { rsBWMExtRulesEntry 9 } rsBWMExtRulesStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMExtRulesEntry 10 } rsBWMExtRulesActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the schedule that will activate the policy." ::= { rsBWMExtRulesEntry 11 } rsBWMExtRulesInactivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the schedule that will inactivate the policy." ::= { rsBWMExtRulesEntry 12 } rsBWMExtRulesForceBestFit OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to force session best fit on the policy while classification." ::= { rsBWMExtRulesEntry 13 } rsBWMExtRulesPacketMarkingType OBJECT-TYPE SYNTAX INTEGER { none(1), dscp(2), tos(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6." ::= { rsBWMExtRulesEntry 14 } rsBWMExtRulesPacketMarkingValue OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7" ::= { rsBWMExtRulesEntry 15 } rsBWMExtRulesReportMaxBw OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to report when the policy discards packets becasue of max bw limitations." ::= { rsBWMExtRulesEntry 16 } rsBWMCurrentExtRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentExtRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the extended list of rules for classifer data base" ::= { rsBWM 60 } rsBWMCurrentExtRulesEntry OBJECT-TYPE SYNTAX RsBWMCurrentExtRulesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentExtRulesName } ::= { rsBWMCurrentExtRulesTable 1 } RsBWMCurrentExtRulesEntry ::= SEQUENCE { rsBWMCurrentExtRulesName DisplayString, rsBWMCurrentExtRulesFromFarm DisplayString, rsBWMCurrentExtRulesToFarm DisplayString, rsBWMCurrentExtRulesClassificationPoint INTEGER, rsBWMCurrentExtRulesTrafficIdentification INTEGER, rsBWMCurrentExtRulesTrafficFlowMaxBW INTEGER, rsBWMCurrentExtRulesMaxConcurrentSessions INTEGER, rsBWMCurrentExtRulesMaxRqstsPerSec INTEGER, rsBWMCurrentExtRulesTrafficIDCookieField DisplayString, rsBWMCurrentExtRulesActivate DisplayString, rsBWMCurrentExtRulesInactivate DisplayString, rsBWMCurrentExtRulesForceBestFit INTEGER, rsBWMCurrentExtRulesPacketMarkingType INTEGER, rsBWMCurrentExtRulesPacketMarkingValue INTEGER, rsBWMCurrentExtRulesReportMaxBw INTEGER } rsBWMCurrentExtRulesName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= { rsBWMCurrentExtRulesEntry 1 } rsBWMCurrentExtRulesFromFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The source farm of the packet for classification." ::= { rsBWMCurrentExtRulesEntry 2 } rsBWMCurrentExtRulesToFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination farm of the packet for classification." ::= { rsBWMCurrentExtRulesEntry 3 } rsBWMCurrentExtRulesClassificationPoint OBJECT-TYPE SYNTAX INTEGER { beforeChanges (1), afterChanges (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the classification will be performed on the original packet, or on the packet after all changes." ::= { rsBWMCurrentExtRulesEntry 4 } rsBWMCurrentExtRulesTrafficIdentification OBJECT-TYPE SYNTAX INTEGER { none (0), client (1), session (2), connection (3), fullL4Session (4), sessionCookie (5), sipCallID (6) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates how a traffic flow is defined for this policy." ::= { rsBWMCurrentExtRulesEntry 5 } rsBWMCurrentExtRulesTrafficFlowMaxBW OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain traffic flow (session) that match this rule." ::= { rsBWMCurrentExtRulesEntry 6} rsBWMCurrentExtRulesMaxConcurrentSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of sessions that can be open simultaneously per traffic flow." ::= { rsBWMCurrentExtRulesEntry 7 } rsBWMCurrentExtRulesMaxRqstsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of http requests that will be forwarded in a second for each traffic flow." ::= { rsBWMCurrentExtRulesEntry 8} rsBWMCurrentExtRulesTrafficIDCookieField OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of cookie field for Traafic Flow ID by cookie." ::= { rsBWMCurrentExtRulesEntry 9 } rsBWMCurrentExtRulesActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the schedule that will activate the policy." ::= { rsBWMCurrentExtRulesEntry 10 } rsBWMCurrentExtRulesInactivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the schedule that will inactivate the policy." ::= { rsBWMCurrentExtRulesEntry 11 } rsBWMCurrentExtRulesForceBestFit OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the policy is best fit for session while classification." ::= { rsBWMCurrentExtRulesEntry 12 } rsBWMCurrentExtRulesPacketMarkingType OBJECT-TYPE SYNTAX INTEGER { none(1), dscp(2), tos(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6." ::= { rsBWMCurrentExtRulesEntry 13 } rsBWMCurrentExtRulesPacketMarkingValue OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-only STATUS mandatory DESCRIPTION "Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7" ::= { rsBWMCurrentExtRulesEntry 14 } rsBWMCurrentExtRulesReportMaxBw OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether to report when the policy discards packets becasue of max bw limitations." ::= { rsBWMCurrentExtRulesEntry 15 } rsBWMRulesTreeManager OBJECT IDENTIFIER ::= { rsBWM 61 } rsBWMRulesTreeName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The name for the subtree root." ::= { rsBWMRulesTreeManager 1 } rsBWMRulesTreeNewParentName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The new parent for the subtree." ::= { rsBWMRulesTreeManager 2 } rsBWMRulesTreeAction OBJECT-TYPE SYNTAX INTEGER { copy (1), move (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Rule tree advanced management." ::= { rsBWMRulesTreeManager 3 } rsBWMTCPSessionClassification OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the mode of classification for a TCP session." -- DEFVAL { disable } ::= { rsBWM 62 } rsBWMNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the grouping for ranges." ::= {rsBWM 63} rsBWMNetworkEntry OBJECT-TYPE SYNTAX RsBWMNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMNetworkName, rsBWMNetworkSubIndex} ::= { rsBWMNetworkTable 1 } RsBWMNetworkEntry ::= SEQUENCE { rsBWMNetworkName DisplayString, rsBWMNetworkSubIndex INTEGER, rsBWMNetworkAddress Ipv6Address, rsBWMNetworkMask DisplayString, rsBWMNetworkFromIP Ipv6Address, rsBWMNetworkToIP Ipv6Address, rsBWMNetworkMode INTEGER, rsBWMNetworkStatus RowStatus } rsBWMNetworkName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the IP Object Rule, must be unique." ::= { rsBWMNetworkEntry 1 } rsBWMNetworkSubIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SubIndex." DEFVAL { 0 } ::= { rsBWMNetworkEntry 2 } rsBWMNetworkAddress OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "IP address" ::= { rsBWMNetworkEntry 3 } rsBWMNetworkMask OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "IP address mask." ::= { rsBWMNetworkEntry 4 } rsBWMNetworkFromIP OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "The from IP Address of the range." ::= { rsBWMNetworkEntry 5 } rsBWMNetworkToIP OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-write STATUS mandatory DESCRIPTION "The to IP Address of the range." ::= { rsBWMNetworkEntry 6 } rsBWMNetworkMode OBJECT-TYPE SYNTAX INTEGER { ipMask(1), ipRange(2), dynamic(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the mode of the entry. This is either a range or an IP address and mask." DEFVAL { 1 } ::= { rsBWMNetworkEntry 7 } rsBWMNetworkStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMNetworkEntry 8 } rsBWMCurrentNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the grouping for ranges." ::= {rsBWM 64} rsBWMCurrentNetworkEntry OBJECT-TYPE SYNTAX RsBWMCurrentNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMCurrentNetworkName, rsBWMCurrentNetworkSubIndex} ::= { rsBWMCurrentNetworkTable 1 } RsBWMCurrentNetworkEntry ::= SEQUENCE { rsBWMCurrentNetworkName DisplayString, rsBWMCurrentNetworkSubIndex INTEGER, rsBWMCurrentNetworkAddress Ipv6Address, rsBWMCurrentNetworkMask DisplayString, rsBWMCurrentNetworkFromIP Ipv6Address, rsBWMCurrentNetworkToIP Ipv6Address, rsBWMCurrentNetworkMode INTEGER } rsBWMCurrentNetworkName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the IP Object Rule, must be unique." ::= { rsBWMCurrentNetworkEntry 1 } rsBWMCurrentNetworkSubIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "SubIndex." ::= { rsBWMCurrentNetworkEntry 2 } rsBWMCurrentNetworkAddress OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-only STATUS mandatory DESCRIPTION "IP address" ::= { rsBWMCurrentNetworkEntry 3 } rsBWMCurrentNetworkMask OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "IP address mask." ::= { rsBWMCurrentNetworkEntry 4 } rsBWMCurrentNetworkFromIP OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-only STATUS mandatory DESCRIPTION "The from IP Address of the range." ::= { rsBWMCurrentNetworkEntry 5 } rsBWMCurrentNetworkToIP OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-only STATUS mandatory DESCRIPTION "The to IP Address of the range." ::= { rsBWMCurrentNetworkEntry 6 } rsBWMCurrentNetworkMode OBJECT-TYPE SYNTAX INTEGER { ipMask(1), ipRange(2), dynamic(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the mode of the entry. This is either a range or an IP address and mask." ::= { rsBWMCurrentNetworkEntry 7 } rsBWMStatisticsNewTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMStatisticsNewEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing statistics data for the bwm policies (with integer key)" ::= {rsBWM 65} rsBWMStatisticsNewEntry OBJECT-TYPE SYNTAX RsBWMStatisticsNewEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMStatisticsPolicyKey } ::= { rsBWMStatisticsNewTable 1 } RsBWMStatisticsNewEntry ::= SEQUENCE { rsBWMStatisticsPolicyKey INTEGER, rsBWMStatisticsPolicyNameSec DisplayString, rsBWMStatisticsBandwidthUsedSecond Counter, rsBWMStatisticsPacketNumberSecond Counter, rsBWMStatisticsGuaranteedReachedSecond TruthValue, rsBWMStatisticsMaximumReachedSecond TruthValue, rsBWMStatisticsMatchedBandwidthSecond Counter, rsBWMStatisticsInboundBandwidthUsedSecond Counter, rsBWMStatisticsInboundMatchedBandwidthSecond Counter, rsBWMStatisticsInboundPacketNumberSecond Counter, rsBWMStatisticsOutboundBandwidthUsedSecond Counter, rsBWMStatisticsOutboundMatchedBandwidthSecond Counter, rsBWMStatisticsOutboundPacketNumberSecond Counter, rsBWMStatisticsNewTCPConnectionsSecond Counter, rsBWMStatisticsNewUDPConnectionsSecond Counter, rsBWMStatisticsQueuedBWSecond Counter, rsBWMStatisticsBandwidthUsedPeriod Counter, rsBWMStatisticsPeakBandwidthPeriod Counter, rsBWMStatisticsPacketNumberPeriod Counter, rsBWMStatisticsGuaranteedReachedCounterPeriod INTEGER, rsBWMStatisticsMaximumReachedCounterPeriod INTEGER, rsBWMStatisticsMatchedBandwidthPeriod Counter, rsBWMStatisticsInboundBandwidthUsedPeriod Counter, rsBWMStatisticsInboundMatchedBandwidthPeriod Counter, rsBWMStatisticsInboundPacketNumberPeriod Counter, rsBWMStatisticsOutboundBandwidthUsedPeriod Counter, rsBWMStatisticsOutboundMatchedBandwidthPeriod Counter, rsBWMStatisticsOutboundPacketNumberPeriod Counter, rsBWMStatisticsNewTCPConnectionsPeriod Counter, rsBWMStatisticsNewUDPConnectionsPeriod Counter, rsBWMStatisticsQueuedBWPeriod Counter } rsBWMStatisticsPolicyKey OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The name of the rule." ::= {rsBWMStatisticsNewEntry 1} rsBWMStatisticsPolicyNameSec OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the rule." ::= {rsBWMStatisticsNewEntry 2} rsBWMStatisticsBandwidthUsedSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth used by the rule in the last second." ::= {rsBWMStatisticsNewEntry 3} rsBWMStatisticsPacketNumberSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that match the rule in the last second." ::= {rsBWMStatisticsNewEntry 4} rsBWMStatisticsGuaranteedReachedSecond OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "Whether the guaranteed bandwidth threshold was reached in the last second." ::= {rsBWMStatisticsNewEntry 5} rsBWMStatisticsMaximumReachedSecond OBJECT-TYPE SYNTAX TruthValue ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the maximum bandwidth threshold was reached in the last second." ::= {rsBWMStatisticsNewEntry 6} rsBWMStatisticsMatchedBandwidthSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The matched bandwidth in the last second." ::= {rsBWMStatisticsNewEntry 7} rsBWMStatisticsInboundBandwidthUsedSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound bandwidth used by the rule in the last second." ::= {rsBWMStatisticsNewEntry 8} rsBWMStatisticsInboundMatchedBandwidthSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound matched bandwidth in the last second." ::= {rsBWMStatisticsNewEntry 9} rsBWMStatisticsInboundPacketNumberSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets that match the rule in the last second." ::= {rsBWMStatisticsNewEntry 10} rsBWMStatisticsOutboundBandwidthUsedSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound bandwidth used by the rule in the last second ." ::= {rsBWMStatisticsNewEntry 11} rsBWMStatisticsOutboundMatchedBandwidthSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound matched bandwidth in the last second." ::= {rsBWMStatisticsNewEntry 12} rsBWMStatisticsOutboundPacketNumberSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that match the rule in the last second." ::= {rsBWMStatisticsNewEntry 13} rsBWMStatisticsNewTCPConnectionsSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new TCP connections in the last second." ::= {rsBWMStatisticsNewEntry 14} rsBWMStatisticsNewUDPConnectionsSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new UDP connections in the last second." ::= {rsBWMStatisticsNewEntry 15} rsBWMStatisticsQueuedBWSecond OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of queued bandwidth in the last second." ::= {rsBWMStatisticsNewEntry 16} rsBWMStatisticsBandwidthUsedPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The bandwidth used by the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsNewEntry 17} rsBWMStatisticsPeakBandwidthPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The highest bandwidth in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsNewEntry 18} rsBWMStatisticsPacketNumberPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that match the rule in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsNewEntry 19} rsBWMStatisticsGuaranteedReachedCounterPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the guaranteed bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsNewEntry 20} rsBWMStatisticsMaximumReachedCounterPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times the maximum bandwidth threshold was reached in the last sampling period defined in rsBWMStatisticsReportingPeriod." ::= {rsBWMStatisticsNewEntry 21} rsBWMStatisticsMatchedBandwidthPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The matched bandwidth in the last sampling period." ::= {rsBWMStatisticsNewEntry 22} rsBWMStatisticsInboundBandwidthUsedPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound bandwidth used by the rule in the last sampling period." ::= {rsBWMStatisticsNewEntry 23} rsBWMStatisticsInboundMatchedBandwidthPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The inbound matched bandwidth in the last sampling period." ::= {rsBWMStatisticsNewEntry 24} rsBWMStatisticsInboundPacketNumberPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of inbound packets that match the rule in the last sampling period." ::= {rsBWMStatisticsNewEntry 25} rsBWMStatisticsOutboundBandwidthUsedPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound bandwidth used by the rule in the last sampling period." ::= {rsBWMStatisticsNewEntry 26} rsBWMStatisticsOutboundMatchedBandwidthPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The outbound matched bandwidth in the last sampling period." ::= {rsBWMStatisticsNewEntry 27} rsBWMStatisticsOutboundPacketNumberPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of outbound packets that match the rule in the last sampling period." ::= {rsBWMStatisticsNewEntry 28} rsBWMStatisticsNewTCPConnectionsPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new TCP connections in the last sampling period." ::= {rsBWMStatisticsNewEntry 29} rsBWMStatisticsNewUDPConnectionsPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of new UDP connections in the last sampling period." ::= {rsBWMStatisticsNewEntry 30} rsBWMStatisticsQueuedBWPeriod OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The amount of queued bandwidth in the last sampling period." ::= {rsBWMStatisticsNewEntry 31} rsBWMPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, this table has the same content as rsBWMRulesTable, but with a different key" ::= {rsBWM 66} rsBWMPolicyEntry OBJECT-TYPE SYNTAX RsBWMPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMPolicyKey } ::= { rsBWMPoliciesTable 1 } RsBWMPolicyEntry ::= SEQUENCE { rsBWMPolicyKey INTEGER, rsBWMPolicyName DisplayString, rsBWMPolicyIndex INTEGER, rsBWMPolicyDestination DisplayString, rsBWMPolicySource DisplayString, rsBWMPolicyAction INTEGER, rsBWMPolicyDirection INTEGER, rsBWMPolicyPriority INTEGER, rsBWMPolicyType INTEGER, rsBWMPolicyDescription DisplayString, rsBWMPolicyGuaranteedBW Integer32, rsBWMPolicyFilterType INTEGER, rsBWMPolicyFilter DisplayString, rsBWMPolicyOperationalStatus INTEGER, rsBWMPolicyReportBlockedPackets INTEGER, rsBWMPolicyMaxBW Integer32, rsBWMPolicyPhysicalPortGroup DisplayString, rsBWMPolicyVLANTagGroup DisplayString, rsBWMPolicySpecific DisplayString, rsBWMPolicyStatus RowStatus, rsBWMPolicyRadiusRule DisplayString } rsBWMPolicyKey OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is an integer key of this table. it has to be unique" ::= { rsBWMPolicyEntry 1 } rsBWMPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMPolicyEntry 2} rsBWMPolicyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the rules." ::= { rsBWMPolicyEntry 3 } rsBWMPolicyDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMPolicyEntry 4} rsBWMPolicySource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMPolicyEntry 5} rsBWMPolicyAction OBJECT-TYPE SYNTAX INTEGER { none(0), forward(1), block(2), blockAndReset(3), blockAndBiDirectionalReset(4), monitorHTTP(5), monitorHTTPS(6), monitorTCP(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the action that the classifier / service must take on this entry." DEFVAL { 1 } ::= { rsBWMPolicyEntry 6 } rsBWMPolicyDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2), session(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." DEFVAL { 2 } ::= { rsBWMPolicyEntry 7 } rsBWMPolicyPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the priority for this entry." DEFVAL { 65535 } ::= { rsBWMPolicyEntry 8 } rsBWMPolicyType OBJECT-TYPE SYNTAX INTEGER { facsBandwidth(1), counter(2), ids(3), chain(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the type of rules (services) ." DEFVAL { 1 } ::= { rsBWMPolicyEntry 9 } rsBWMPolicyDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Description." ::= { rsBWMPolicyEntry 10 } rsBWMPolicyGuaranteedBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth allocated for a certain rule." DEFVAL { 0 } ::= { rsBWMPolicyEntry 11 } rsBWMPolicyFilterType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-write STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMPolicyEntry 12 } rsBWMPolicyFilter OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMPolicyEntry 13 } rsBWMPolicyOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if the rule is active or inactive. The active rule table contains only active rules." DEFVAL { 1 } ::= { rsBWMPolicyEntry 14 } rsBWMPolicyReportBlockedPackets OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), securityEvent (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if blocked packets are be reported." ::= { rsBWMPolicyEntry 15 } rsBWMPolicyMaxBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain rule." DEFVAL { 0 } ::= { rsBWMPolicyEntry 16 } rsBWMPolicyPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the physical port group for this rule." ::= { rsBWMPolicyEntry 17 } rsBWMPolicyVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMPolicyEntry 18 } rsBWMPolicySpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMPolicyEntry 19 } rsBWMPolicyStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMPolicyEntry 20 } rsBWMPolicyRadiusRule OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table" DEFVAL { "any" } ::= {rsBWMPolicyEntry 21} rsBWMCurrentPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of rules for classifer data base, these rules can be used to classify packets for bandwidth management, this table has the same content as rsBWMCurrentRulesTable, but with a different key" ::= {rsBWM 67} rsBWMCurrentPolicyEntry OBJECT-TYPE SYNTAX RsBWMCurrentPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentPolicyKey } ::= { rsBWMCurrentPoliciesTable 1 } RsBWMCurrentPolicyEntry ::= SEQUENCE { rsBWMCurrentPolicyKey INTEGER, rsBWMCurrentPolicyName DisplayString, rsBWMCurrentPolicyIndex INTEGER, rsBWMCurrentPolicyDestination DisplayString, rsBWMCurrentPolicySource DisplayString, rsBWMCurrentPolicyAction INTEGER, rsBWMCurrentPolicyDirection INTEGER, rsBWMCurrentPolicyPriority INTEGER, rsBWMCurrentPolicyType INTEGER, rsBWMCurrentPolicyDescription DisplayString, rsBWMCurrentPolicyGuaranteedBW Integer32, rsBWMCurrentPolicyFilterType INTEGER, rsBWMCurrentPolicyFilter DisplayString, rsBWMCurrentPolicyReportBlockedPackets INTEGER, rsBWMCurrentPolicyMaxBW Integer32, rsBWMCurrentPolicyPhysicalPortGroup DisplayString, rsBWMCurrentPolicyVLANTagGroup DisplayString, rsBWMCurrentPolicySpecific DisplayString, rsBWMCurrentPolicyRadiusRule DisplayString } rsBWMCurrentPolicyKey OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This is an integer key of this table. it has to be unique" ::= { rsBWMCurrentPolicyEntry 1 } rsBWMCurrentPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= {rsBWMCurrentPolicyEntry 2} rsBWMCurrentPolicyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the rules." ::= { rsBWMCurrentPolicyEntry 3 } rsBWMCurrentPolicyDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMCurrentPolicyEntry 4} rsBWMCurrentPolicySource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the Objects table or can be an IP address." DEFVAL { "any" } ::= {rsBWMCurrentPolicyEntry 5} rsBWMCurrentPolicyAction OBJECT-TYPE SYNTAX INTEGER { none(0), forward(1), block(2), blockAndReset(3), blockAndBiDirectionalReset(4), monitorHTTP(5), monitorHTTPS(6), monitorTCP(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the action that the classifier / service must take on this entry." DEFVAL { 1 } ::= { rsBWMCurrentPolicyEntry 6 } rsBWMCurrentPolicyDirection OBJECT-TYPE SYNTAX INTEGER { oneway(1), twoway(2), session(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the direction of the incoming packet." DEFVAL { 2 } ::= { rsBWMCurrentPolicyEntry 7 } rsBWMCurrentPolicyPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the priority for this entry." DEFVAL { 65535 } ::= { rsBWMCurrentPolicyEntry 8 } rsBWMCurrentPolicyType OBJECT-TYPE SYNTAX INTEGER { facsBandwidth(1), counter(2), ids(3), chain(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the type of rules (services) ." DEFVAL { 1 } ::= { rsBWMCurrentPolicyEntry 9 } rsBWMCurrentPolicyDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "Description." ::= { rsBWMCurrentPolicyEntry 10 } rsBWMCurrentPolicyGuaranteedBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Bandwidth allocated for a certain rule." DEFVAL { 0 } ::= { rsBWMCurrentPolicyEntry 11 } rsBWMCurrentPolicyFilterType OBJECT-TYPE SYNTAX INTEGER { none(1), filter(2), group(3), policy(4)} ACCESS read-write STATUS mandatory DESCRIPTION "The type of policy - i.e. if this is a filter, group or policy." DEFVAL { 1 } ::= { rsBWMCurrentPolicyEntry 12 } rsBWMCurrentPolicyFilter OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name for the filter policy for the rule." ::= { rsBWMCurrentPolicyEntry 13 } rsBWMCurrentPolicyReportBlockedPackets OBJECT-TYPE SYNTAX INTEGER { disable (0), enable (1), securityEvent (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if blocked packets are be reported." ::= { rsBWMCurrentPolicyEntry 14 } rsBWMCurrentPolicyMaxBW OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain rule." DEFVAL { 0 } ::= { rsBWMCurrentPolicyEntry 15 } rsBWMCurrentPolicyPhysicalPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the physical port group for this rule." ::= { rsBWMCurrentPolicyEntry 16 } rsBWMCurrentPolicyVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this rule." ::= { rsBWMCurrentPolicyEntry 17 } rsBWMCurrentPolicySpecific OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if there is additional data to the policy." ::= { rsBWMCurrentPolicyEntry 18 } rsBWMCurrentPolicyRadiusRule OBJECT-TYPE SYNTAX DisplayString (SIZE(0..30)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the radius relevant this session belongs to. This field is relevant only for cid. Radius' rules names can be found in the Radius Rules Table" DEFVAL { "any" } ::= {rsBWMCurrentPolicyEntry 19} rsBWMExtPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMExtPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the extended list of rules for classifer data base. This table has the same content as rsBWMExtRulesTable, but the key is an integer" ::= { rsBWM 68 } rsBWMExtPolicyEntry OBJECT-TYPE SYNTAX RsBWMExtPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMExtPolicyKey } ::= { rsBWMExtPoliciesTable 1 } RsBWMExtPolicyEntry ::= SEQUENCE { rsBWMExtPolicyKey INTEGER, rsBWMExtPolicyName DisplayString, rsBWMExtPolicyFromFarm DisplayString, rsBWMExtPolicyToFarm DisplayString, rsBWMExtPolicyClassificationPoint INTEGER, rsBWMExtPolicyTrafficIdentification INTEGER, rsBWMExtPolicyTrafficFlowMaxBW INTEGER, rsBWMExtPolicyMaxConcurrentSessions INTEGER, rsBWMExtPolicyMaxRqstsPerSec INTEGER, rsBWMExtPolicyTrafficIDCookieField DisplayString, rsBWMExtPolicyStatus RowStatus, rsBWMExtPolicyActivate DisplayString, rsBWMExtPolicyInactivate DisplayString, rsBWMExtPolicyForceBestFit INTEGER, rsBWMExtPolicyPacketMarkingType INTEGER, rsBWMExtPolicyPacketMarkingValue INTEGER, rsBWMExtPolicyReportMaxBw INTEGER } rsBWMExtPolicyKey OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The key of this table." ::= { rsBWMExtPolicyEntry 1 } rsBWMExtPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= { rsBWMExtPolicyEntry 2 } rsBWMExtPolicyFromFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The source farm of the packet for classification." ::= { rsBWMExtPolicyEntry 3 } rsBWMExtPolicyToFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination farm of the packet for classification." ::= { rsBWMExtPolicyEntry 4 } rsBWMExtPolicyClassificationPoint OBJECT-TYPE SYNTAX INTEGER { beforeChanges (1), afterChanges (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the classification will be performed on the original packet, or on the packet after all changes." DEFVAL { 2 } ::= { rsBWMExtPolicyEntry 5 } rsBWMExtPolicyTrafficIdentification OBJECT-TYPE SYNTAX INTEGER { none (0), client (1), session (2), connection (3), fullL4Session (4), sessionCookie (5), sipCallID (6) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates how a traffic flow is defined for this policy." ::= { rsBWMExtPolicyEntry 6 } rsBWMExtPolicyTrafficFlowMaxBW OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain traffic flow (session) that match this rule." ::= { rsBWMExtPolicyEntry 7 } rsBWMExtPolicyMaxConcurrentSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of sessions that can be open simultaneously per traffic flow." ::= { rsBWMExtPolicyEntry 8 } rsBWMExtPolicyMaxRqstsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of http requests that will be forwarded in a second for each traffic flow." ::= { rsBWMExtPolicyEntry 9 } rsBWMExtPolicyTrafficIDCookieField OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of cookie field for Traafic Flow ID by cookie." ::= { rsBWMExtPolicyEntry 10 } rsBWMExtPolicyStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMExtPolicyEntry 11 } rsBWMExtPolicyActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the schedule that will activate the policy." ::= { rsBWMExtPolicyEntry 12 } rsBWMExtPolicyInactivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the schedule that will inactivate the policy." ::= { rsBWMExtPolicyEntry 13 } rsBWMExtPolicyForceBestFit OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to force session best fit on the policy while classification." ::= { rsBWMExtPolicyEntry 14 } rsBWMExtPolicyPacketMarkingType OBJECT-TYPE SYNTAX INTEGER { none(1), dscp(2), tos(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6." ::= { rsBWMExtPolicyEntry 15 } rsBWMExtPolicyPacketMarkingValue OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7" ::= { rsBWMExtPolicyEntry 16 } rsBWMExtPolicyReportMaxBw OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether to report when the policy discards packets becasue of max bw limitations." ::= { rsBWMExtPolicyEntry 17 } rsBWMCurrentExtPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMCurrentExtPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the extended list of rules for classifer data base" ::= { rsBWM 69 } rsBWMCurrentExtPolicyEntry OBJECT-TYPE SYNTAX RsBWMCurrentExtPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMCurrentExtPolicyKey } ::= { rsBWMCurrentExtPoliciesTable 1 } RsBWMCurrentExtPolicyEntry ::= SEQUENCE { rsBWMCurrentExtPolicyKey INTEGER, rsBWMCurrentExtPolicyName DisplayString, rsBWMCurrentExtPolicyFromFarm DisplayString, rsBWMCurrentExtPolicyToFarm DisplayString, rsBWMCurrentExtPolicyClassificationPoint INTEGER, rsBWMCurrentExtPolicyTrafficIdentification INTEGER, rsBWMCurrentExtPolicyTrafficFlowMaxBW INTEGER, rsBWMCurrentExtPolicyMaxConcurrentSessions INTEGER, rsBWMCurrentExtPolicyMaxRqstsPerSec INTEGER, rsBWMCurrentExtPolicyTrafficIDCookieField DisplayString, rsBWMCurrentExtPolicyActivate DisplayString, rsBWMCurrentExtPolicyInactivate DisplayString, rsBWMCurrentExtPolicyForceBestFit INTEGER, rsBWMCurrentExtPolicyPacketMarkingType INTEGER, rsBWMCurrentExtPolicyPacketMarkingValue INTEGER, rsBWMCurrentExtPolicyReportMaxBw INTEGER } rsBWMCurrentExtPolicyKey OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The key for this table." ::= { rsBWMCurrentExtPolicyEntry 1 } rsBWMCurrentExtPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the Rule must be unique." ::= { rsBWMCurrentExtPolicyEntry 2 } rsBWMCurrentExtPolicyFromFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The source farm of the packet for classification." ::= { rsBWMCurrentExtPolicyEntry 3 } rsBWMCurrentExtPolicyToFarm OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination farm of the packet for classification." ::= { rsBWMCurrentExtPolicyEntry 4 } rsBWMCurrentExtPolicyClassificationPoint OBJECT-TYPE SYNTAX INTEGER { beforeChanges (1), afterChanges (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the classification will be performed on the original packet, or on the packet after all changes." ::= { rsBWMCurrentExtPolicyEntry 5 } rsBWMCurrentExtPolicyTrafficIdentification OBJECT-TYPE SYNTAX INTEGER { none (0), client (1), session (2), connection (3), fullL4Session (4), sessionCookie (5), sipCallID (6) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates how a traffic flow is defined for this policy." ::= { rsBWMCurrentExtPolicyEntry 6 } rsBWMCurrentExtPolicyTrafficFlowMaxBW OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum bandwidth allocated for a certain traffic flow (session) that match this rule." ::= { rsBWMCurrentExtPolicyEntry 7} rsBWMCurrentExtPolicyMaxConcurrentSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of sessions that can be open simultaneously per traffic flow." ::= { rsBWMCurrentExtPolicyEntry 8} rsBWMCurrentExtPolicyMaxRqstsPerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum number of http requests that will be forwarded in a second for each traffic flow." ::= { rsBWMCurrentExtPolicyEntry 9} rsBWMCurrentExtPolicyTrafficIDCookieField OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of cookie field for Traafic Flow ID by cookie." ::= { rsBWMCurrentExtPolicyEntry 10} rsBWMCurrentExtPolicyActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the schedule that will activate the policy." ::= { rsBWMCurrentExtPolicyEntry 11 } rsBWMCurrentExtPolicyInactivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the schedule that will inactivate the policy." ::= { rsBWMCurrentExtPolicyEntry 12 } rsBWMCurrentExtPolicyForceBestFit OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the policy is best fit for session while classification." ::= { rsBWMCurrentExtPolicyEntry 13 } rsBWMCurrentExtPolicyPacketMarkingType OBJECT-TYPE SYNTAX INTEGER { none(1), dscp(2), tos(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Type of packet marking for packets matching this policy. DSCP marking will set 6 low bits Tos marking will set bits 3-6." ::= { rsBWMCurrentExtPolicyEntry 14 } rsBWMCurrentExtPolicyPacketMarkingValue OBJECT-TYPE SYNTAX INTEGER (-1 | 0..63) ACCESS read-only STATUS mandatory DESCRIPTION "Value of packet marking in the TOS field of the ip header. For DSCP marking value should be 0-63. For TOS it should be 0-7" ::= { rsBWMCurrentExtPolicyEntry 15 } rsBWMCurrentExtPolicyReportMaxBw OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether to report when the policy discards packets becasue of max bw limitations." ::= { rsBWMCurrentExtPolicyEntry 16 } rsBWMMaxPacketsForClassification OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the maximum number of data packets per session that will be used for the classification of a session (in per session mode)." ::= { rsBWM 70 } rsBWMACL OBJECT IDENTIFIER ::= { rsBWM 71 } rsBWMACLModifyPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMACLModifyPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of modified policies for the ACL module" ::= {rsBWMACL 1} rsBWMACLModifyPolicyEntry OBJECT-TYPE SYNTAX RsBWMACLModifyPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMACLModifyPolicyName } ::= { rsBWMACLModifyPoliciesTable 1 } RsBWMACLModifyPolicyEntry ::= SEQUENCE { rsBWMACLModifyPolicyName DisplayString, rsBWMACLModifyPolicyIndex INTEGER, rsBWMACLModifyPolicyDescription DisplayString, rsBWMACLModifyPolicyDestination DisplayString, rsBWMACLModifyPolicySource DisplayString, rsBWMACLModifyPolicyService DisplayString, rsBWMACLModifyPolicyVLANTagGroup DisplayString, rsBWMACLModifyPolicyPortGroup DisplayString, rsBWMACLModifyPolicyActivate DisplayString, rsBWMACLModifyPolicyInactivate DisplayString, rsBWMACLModifyPolicyAction INTEGER, rsBWMACLModifyPolicyProtocol INTEGER, rsBWMACLModifyPolicyIcmpFlags DisplayString, rsBWMACLModifyPolicyClassificationPoint INTEGER, rsBWMACLModifyPolicyOperationalStatus INTEGER, rsBWMACLModifyPolicyStatus RowStatus, rsBWMACLModifyPolicyPacketReportStatus INTEGER } rsBWMACLModifyPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the policy." ::= {rsBWMACLModifyPolicyEntry 1} rsBWMACLModifyPolicyIndex OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the policies." ::= { rsBWMACLModifyPolicyEntry 2 } rsBWMACLModifyPolicyDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "Description." ::= { rsBWMACLModifyPolicyEntry 3 } rsBWMACLModifyPolicyDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the networks table or can be an IP address." DEFVAL { "any" } ::= {rsBWMACLModifyPolicyEntry 4} rsBWMACLModifyPolicySource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-write STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the networks table or can be an IP address." DEFVAL { "any" } ::= {rsBWMACLModifyPolicyEntry 5} rsBWMACLModifyPolicyService OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the service used for classification." ::= {rsBWMACLModifyPolicyEntry 6} rsBWMACLModifyPolicyVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this policy." ::= { rsBWMACLModifyPolicyEntry 7 } rsBWMACLModifyPolicyPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the physical port group for this policy." ::= { rsBWMACLModifyPolicyEntry 8 } rsBWMACLModifyPolicyActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the schedule that will activate the policy." ::= { rsBWMACLModifyPolicyEntry 9 } rsBWMACLModifyPolicyInactivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the schedule that will inactivate the policy." ::= { rsBWMACLModifyPolicyEntry 10 } rsBWMACLModifyPolicyAction OBJECT-TYPE SYNTAX INTEGER { accept(1), drop(2), dropAndResetSource(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the action that the ACL must take on this entry." DEFVAL { 2 } ::= { rsBWMACLModifyPolicyEntry 11 } rsBWMACLModifyPolicyProtocol OBJECT-TYPE SYNTAX INTEGER { tcp (1), udp (2), icmp (3), other (4), any (5), gre (6), sctp (7), l2tp (8), gtp (9), ipinip (10) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the protocol this policy refers to." DEFVAL { 5 } ::= { rsBWMACLModifyPolicyEntry 12 } rsBWMACLModifyPolicyIcmpFlags OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable marks the icmp message types this policy refers to." DEFVAL { "11111111111111111111" } ::= { rsBWMACLModifyPolicyEntry 13 } rsBWMACLModifyPolicyClassificationPoint OBJECT-TYPE SYNTAX INTEGER { beforeChanges (1), afterChanges (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Whether the classification will be performed on the original packet, or on the packet after all changes." DEFVAL { 1 } ::= { rsBWMACLModifyPolicyEntry 14 } rsBWMACLModifyPolicyOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates if the rule is active or inactive. The active rule table contains only active rules." DEFVAL { 1 } ::= { rsBWMACLModifyPolicyEntry 15 } rsBWMACLModifyPolicyStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the administrative status of this entry. Used to delete an entry of this table." ::= { rsBWMACLModifyPolicyEntry 16 } rsBWMACLModifyPolicyPacketReportStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This value determines whether the device issues a trap when the data matches the policy." DEFVAL { 2 } ::= { rsBWMACLModifyPolicyEntry 17 } rsBWMACLActualPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMACLActualPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the list of actual policies for the ACL module" ::= {rsBWMACL 2} rsBWMACLActualPolicyEntry OBJECT-TYPE SYNTAX RsBWMACLActualPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMACLActualPolicyName } ::= { rsBWMACLActualPoliciesTable 1 } RsBWMACLActualPolicyEntry ::= SEQUENCE { rsBWMACLActualPolicyName DisplayString, rsBWMACLActualPolicyIndex INTEGER, rsBWMACLActualPolicyDescription DisplayString, rsBWMACLActualPolicyDestination DisplayString, rsBWMACLActualPolicySource DisplayString, rsBWMACLActualPolicyService DisplayString, rsBWMACLActualPolicyVLANTagGroup DisplayString, rsBWMACLActualPolicyPortGroup DisplayString, rsBWMACLActualPolicyActivate DisplayString, rsBWMACLActualPolicyInactivate DisplayString, rsBWMACLActualPolicyAction INTEGER, rsBWMACLActualPolicyProtocol INTEGER, rsBWMACLActualPolicyIcmpFlags DisplayString, rsBWMACLActualPolicyClassificationPoint INTEGER, rsBWMACLActualPolicyOperationalStatus INTEGER, rsBWMACLActualPolicyPacketReportStatus INTEGER } rsBWMACLActualPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the policy." ::= {rsBWMACLActualPolicyEntry 1} rsBWMACLActualPolicyIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the administrative index of a line it determines the order of the policies." ::= { rsBWMACLActualPolicyEntry 2 } rsBWMACLActualPolicyDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "Description." ::= { rsBWMACLActualPolicyEntry 3 } rsBWMACLActualPolicyDestination OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The destination address / range of address for the packet, the name is defined in the networks table or can be an IP address." ::= {rsBWMACLActualPolicyEntry 4} rsBWMACLActualPolicySource OBJECT-TYPE SYNTAX DisplayString (SIZE(0..46)) ACCESS read-only STATUS mandatory DESCRIPTION "The source address / range of address for the packet, the name is defined in the networks table or can be an IP address." ::= {rsBWMACLActualPolicyEntry 5} rsBWMACLActualPolicyService OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the service used for classification." ::= {rsBWMACLActualPolicyEntry 6} rsBWMACLActualPolicyVLANTagGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the VLAN tag group for this policy." ::= { rsBWMACLActualPolicyEntry 7 } rsBWMACLActualPolicyPortGroup OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the physical port group for this policy." ::= { rsBWMACLActualPolicyEntry 8 } rsBWMACLActualPolicyActivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the schedule that will activate the policy." ::= { rsBWMACLActualPolicyEntry 9 } rsBWMACLActualPolicyInactivate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..29)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the schedule that will inactivate the policy." ::= { rsBWMACLActualPolicyEntry 10 } rsBWMACLActualPolicyAction OBJECT-TYPE SYNTAX INTEGER { accept(1), drop(2), dropAndResetSource(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the action that the ACL must take on this entry." ::= { rsBWMACLActualPolicyEntry 11 } rsBWMACLActualPolicyProtocol OBJECT-TYPE SYNTAX INTEGER { tcp (1), udp (2), icmp (3), other (4), any (5), gre (6), sctp (7), l2tp (8), gtp (9), ipinip (10) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the protocol this policy refers to." ::= { rsBWMACLActualPolicyEntry 12 } rsBWMACLActualPolicyIcmpFlags OBJECT-TYPE SYNTAX DisplayString (SIZE(0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable marks the icmp message types this policy refers to." ::= { rsBWMACLActualPolicyEntry 13 } rsBWMACLActualPolicyClassificationPoint OBJECT-TYPE SYNTAX INTEGER { beforeChanges (1), afterChanges (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Whether the classification will be performed on the original packet, or on the packet after all changes." ::= { rsBWMACLActualPolicyEntry 14 } rsBWMACLActualPolicyOperationalStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates if the rule is active or inactive. The active rule table contains only active rules." ::= { rsBWMACLActualPolicyEntry 15 } rsBWMACLActualPolicyPacketReportStatus OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "This value determines whether the device issues a trap when the data matches the policy." ::= { rsBWMACLActualPolicyEntry 16 } rsBWMACLStatus OBJECT-TYPE SYNTAX FeatureStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the ACL module." ::= { rsBWMACL 3 } rsBWMACLLearningPeriod OBJECT-TYPE SYNTAX INTEGER (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The learning period of the ACL in seconds." DEFVAL { 1800 } ::= { rsBWMACL 4 } rsBWMACLTCPHandshakeTimeout OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of tcp sessions in the handshake state." DEFVAL { 60 } ::= { rsBWMACL 5 } rsBWMACLTCPEstablishedTimeout OBJECT-TYPE SYNTAX INTEGER (60..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of tcp sessions in the established state." DEFVAL { 3600 } ::= { rsBWMACL 6 } rsBWMACLTCPFinTimeout OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of tcp sessions in the fin state." DEFVAL { 120 } ::= { rsBWMACL 7 } rsBWMACLTCPRstTimeout OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of tcp sessions in the reset state." DEFVAL { 30 } ::= { rsBWMACL 8 } rsBWMACLTCPMidSessMode OBJECT-TYPE SYNTAX INTEGER { drop (1), allow (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The action taken for tcp mid session packets." DEFVAL { 1 } ::= { rsBWMACL 9 } rsBWMACLTCPRstValidationMode OBJECT-TYPE SYNTAX INTEGER { drop (1), allow (2), reportOnly (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The action taken for invalid reset packets." DEFVAL { 1 } ::= { rsBWMACL 10 } rsBWMACLUDPTimeout OBJECT-TYPE SYNTAX INTEGER (1..3600) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of udp sessions." DEFVAL { 600 } ::= { rsBWMACL 11 } rsBWMACLICMPTimeout OBJECT-TYPE SYNTAX INTEGER (1..300) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of icmp sessions." DEFVAL { 60 } ::= { rsBWMACL 12 } rsBWMACLOtherTimeout OBJECT-TYPE SYNTAX INTEGER (1..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of other sessions (not tcp, udp, gre, l2tp, gtp, sctp or icmp)." DEFVAL { 600 } ::= { rsBWMACL 13 } rsBWMACLSummaryReportsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMACLSummaryReportsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the summary reports of each ACL policy" ::= {rsBWMACL 14} rsBWMACLSummaryReportsEntry OBJECT-TYPE SYNTAX RsBWMACLSummaryReportsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX { rsBWMACLSummaryReportsPolicyName } ::= { rsBWMACLSummaryReportsTable 1 } RsBWMACLSummaryReportsEntry ::= SEQUENCE { rsBWMACLSummaryReportsPolicyName DisplayString, rsBWMACLSummaryReportsTCPAllow INTEGER, rsBWMACLSummaryReportsTCPDrop INTEGER, rsBWMACLSummaryReportsUDPAllow INTEGER, rsBWMACLSummaryReportsUDPDrop INTEGER, rsBWMACLSummaryReportsICMPAllow INTEGER, rsBWMACLSummaryReportsICMPDrop INTEGER, rsBWMACLSummaryReportsOtherAllow INTEGER, rsBWMACLSummaryReportsOtherDrop INTEGER, rsBWMACLSummaryReportsTCPMidSess INTEGER, rsBWMACLSummaryReportsTCPRstInvalid INTEGER, rsBWMACLSummaryReportsTCPHandshakeViolation INTEGER, rsBWMACLSummaryReportsICMPSmurf INTEGER, rsBWMACLSummaryReportsICMPPacketAnomaly INTEGER, rsBWMACLSummaryReportsGREAllow INTEGER, rsBWMACLSummaryReportsGREDrop INTEGER, rsBWMACLSummaryReportsSCTPAllow INTEGER, rsBWMACLSummaryReportsSCTPDrop INTEGER, rsBWMACLSummaryReportsL2TPAllow INTEGER, rsBWMACLSummaryReportsL2TPDrop INTEGER, rsBWMACLSummaryReportsGTPAllow INTEGER, rsBWMACLSummaryReportsGTPDrop INTEGER, rsBWMACLSummaryReportsIPinIPAllow INTEGER, rsBWMACLSummaryReportsIPinIPDrop INTEGER } rsBWMACLSummaryReportsPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the policy." ::= {rsBWMACLSummaryReportsEntry 1} rsBWMACLSummaryReportsTCPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 2 } rsBWMACLSummaryReportsTCPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of TCP dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 3 } rsBWMACLSummaryReportsUDPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of UDP allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 4 } rsBWMACLSummaryReportsUDPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of UDP dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 5 } rsBWMACLSummaryReportsICMPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP allowed messaged last period" ::= { rsBWMACLSummaryReportsEntry 6 } rsBWMACLSummaryReportsICMPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP dropped messages last period" ::= { rsBWMACLSummaryReportsEntry 7 } rsBWMACLSummaryReportsOtherAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of other porotocols allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 8 } rsBWMACLSummaryReportsOtherDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of other protocols dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 9 } rsBWMACLSummaryReportsTCPMidSess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of mid flow TCP sessions last period" ::= { rsBWMACLSummaryReportsEntry 10 } rsBWMACLSummaryReportsTCPRstInvalid OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of invalid TCP reset packets last period" ::= { rsBWMACLSummaryReportsEntry 11 } rsBWMACLSummaryReportsTCPHandshakeViolation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of invalid TCP handshakes" ::= { rsBWMACLSummaryReportsEntry 12 } rsBWMACLSummaryReportsICMPSmurf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of ICMP smurf packets (reply message arriving without a request message) last period" ::= { rsBWMACLSummaryReportsEntry 13 } rsBWMACLSummaryReportsICMPPacketAnomaly OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of abnormal ICMP packets" ::= { rsBWMACLSummaryReportsEntry 14 } rsBWMACLSummaryReportsGREAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of GRE allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 15 } rsBWMACLSummaryReportsGREDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of GRE dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 16 } rsBWMACLSummaryReportsSCTPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of SCTP allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 17 } rsBWMACLSummaryReportsSCTPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of SCTP dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 18 } rsBWMACLSummaryReportsL2TPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of L2TP allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 19 } rsBWMACLSummaryReportsL2TPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of L2TP dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 20 } rsBWMACLSummaryReportsGTPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of GTP allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 21 } rsBWMACLSummaryReportsGTPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of GTP dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 22 } rsBWMACLSummaryReportsIPinIPAllow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPinIP allowed sessions last period" ::= { rsBWMACLSummaryReportsEntry 23 } rsBWMACLSummaryReportsIPinIPDrop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPinIP dropped sessions last period" ::= { rsBWMACLSummaryReportsEntry 24 } rsBWMACLReportMaxTraps OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of ACL detailed report traps sent per second." DEFVAL { 10 } ::= { rsBWMACL 15 } rsBWMACLReportPeriod OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "ACL reports period for summary reports and for sending SRP." DEFVAL { 60 } ::= { rsBWMACL 16 } rsBWMACLReportSendSrp OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "Whether the ACL module send summary reports via SRP or not." DEFVAL { 2 } ::= { rsBWMACL 17 } rsBWMACLDetailedReportType OBJECT-TYPE SYNTAX INTEGER { disable (1), drop (2), allow (3), all (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of detailed reports the ACL will send." DEFVAL { 4 } ::= { rsBWMACL 18 } rsBWMACLGRETimeout OBJECT-TYPE SYNTAX INTEGER (1..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of gre sessions." DEFVAL { 3600 } ::= { rsBWMACL 19 } rsBWMACLSCTPTimeout OBJECT-TYPE SYNTAX INTEGER (1..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of sctp sessions." DEFVAL { 3600 } ::= { rsBWMACL 20 } rsBWMACLAllowICMPSmurf OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "An indication whether ICMP smurf checks should be ignored." DEFVAL { false } ::= { rsBWMACL 21 } rsBWMACLL2TPTimeout OBJECT-TYPE SYNTAX INTEGER (1..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of l2tp sessions." DEFVAL { 3600 } ::= { rsBWMACL 22 } rsBWMACLGTPTimeout OBJECT-TYPE SYNTAX INTEGER (1..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of gtp sessions." DEFVAL { 3600 } ::= { rsBWMACL 23 } rsBWMACLPacketTraceStatus OBJECT-TYPE SYNTAX FeatureStatus ACCESS read-write STATUS mandatory DESCRIPTION "The status of the ACL packet trace." ::= { rsBWMACL 24 } rsBWMACLIPinIPTimeout OBJECT-TYPE SYNTAX INTEGER (1..7200) ACCESS read-write STATUS mandatory DESCRIPTION "The timeout of Ip in Ip sessions." DEFVAL { 3600 } ::= { rsBWMACL 25 } rsBWMACLDefaultAction OBJECT-TYPE SYNTAX INTEGER { accept (1), drop (2), current (3) } ACCESS read-write STATUS mandatory DESCRIPTION "The action set for the default policy after reboot" DEFVAL { 3 } ::= { rsBWMACL 26 } rsBWMSecGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMModifySecGrpTag ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the groups of SEC tags." ::= {rsBWM 73} rsBWMModifySecGrpTag OBJECT-TYPE SYNTAX RsBWMModifySecGrpTag ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMSecGroupEntryName } ::= { rsBWMSecGroupTable 1 } RsBWMModifySecGrpTag ::= SEQUENCE { rsBWMSecGroupEntryName DisplayString, rsBWMSecGroupEntryValue INTEGER, rsBWMSecGroupEntryStatus INTEGER, rsBWMSecGroupEntryRowStatus RowStatus } rsBWMSecGroupEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the SECs group." ::= { rsBWMModifySecGrpTag 1 } rsBWMSecGroupEntryValue OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Value for the SGT." ::= { rsBWMModifySecGrpTag 2 } rsBWMSecGroupEntryStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The Status for the SGT." DEFVAL { 2 } ::= { rsBWMModifySecGrpTag 3 } rsBWMSecGroupEntryRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the status of this entry." ::= { rsBWMModifySecGrpTag 4 } rsBWMSecGroupCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF RsBWMActiveSecGrpTag ACCESS not-accessible STATUS mandatory DESCRIPTION "Table containing the current groups of SEC tags." ::= {rsBWM 74} rsBWMActiveSecGrpTag OBJECT-TYPE SYNTAX RsBWMActiveSecGrpTag ACCESS not-accessible STATUS mandatory DESCRIPTION "The row definition for this table." INDEX {rsBWMSecGroupActiveEntryName} ::= { rsBWMSecGroupCurrentTable 1 } RsBWMActiveSecGrpTag ::= SEQUENCE { rsBWMSecGroupActiveEntryName DisplayString, rsBWMSecGroupEntryActiveValue INTEGER } rsBWMSecGroupActiveEntryName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "The Name for the SECs group." ::= { rsBWMActiveSecGrpTag 1 } rsBWMSecGroupEntryActiveValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Value for the SGT." ::= { rsBWMActiveSecGrpTag 2 } -- Application-specific traps for BWM -- Each enterprise-specific trap has two bound variables describing the exact nature of -- the trap. rndErrorDesc provides a detailed description of the problem, including the -- related interface number, board number or any other applicable variable. -- rndErrorSeverity describes the severity of this problem. -- Trap template -- ------------- -- TRAP-TYPE -- ENTERPRISE rsServerDispatcher -- VARIABLES { rndErrorDesc, rndErrorSeverity } -- DESCRIPTION -- "" -- ::= -- ------------- rsBWMPacketBlocked TRAP-TYPE ENTERPRISE rsBWM VARIABLES { rndErrorDesc, rndErrorSeverity } DESCRIPTION "This trap is sent to inform the user about blocked packets." ::= 1 rsBWMTrafficFlowBWTablesFull TRAP-TYPE ENTERPRISE rsBWM VARIABLES { rndErrorDesc, rndErrorSeverity } DESCRIPTION "This trap is sent to inform the user about one of the tables for BW per traffic flow support being full." ::= 2 rsBWMFilterCreationFailed TRAP-TYPE ENTERPRISE rsBWM VARIABLES { rndErrorDesc, rndErrorSeverity } DESCRIPTION "This trap is sent to inform the user that BWM filter creation failed." ::= 3 rsBWMNoDefaultGatewayForClassification TRAP-TYPE ENTERPRISE rsBWM VARIABLES { rndErrorDesc, rndErrorSeverity } DESCRIPTION "This trap is sent to inform the user that default gateway is needed for classification but is not configured." ::= 4 rsBWMAttackReportTrap TRAP-TYPE ENTERPRISE rsBWM VARIABLES { rndErrorDesc, rndErrorSeverity } DESCRIPTION "This trap is sent to inform the user of an attack detected by the BWM." ::= 5 END