-- COPYRIGHT NOTICE -- Copyright (c) Radware Ltd. 2009 -- All rights reserved ALTEON-CHEETAH-NETWORK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32, Counter64, IpAddress, Unsigned32 FROM SNMPv2-SMI DisplayString, PhysAddress FROM SNMPv2-TC aws-switch FROM ALTEON-ROOT-MIB; layer3 MODULE-IDENTITY LAST-UPDATED "200908050000Z" -- 5 August, 2009 ORGANIZATION "Radware Ltd." CONTACT-INFO "Lobby 1 (Visitors) and Lobby 2 (Deliveries) 575 Corporate Drive Mahwah, NJ 07430 support@radware.com" DESCRIPTION "The MIB module for the Alteon OS Layer 3 configuration, statistics and information ." REVISION "200908050000Z" -- 5 August, 2009 DESCRIPTION "Added revision clause for SMIv2 compliance." ::= { aws-switch 3 } layer3Configs OBJECT IDENTIFIER ::= { layer3 1 } layer3Stats OBJECT IDENTIFIER ::= { layer3 2 } layer3Info OBJECT IDENTIFIER ::= { layer3 3 } layer3Oper OBJECT IDENTIFIER ::= { layer3 4 } ipInterfaceCfg OBJECT IDENTIFIER ::= { layer3Configs 1 } ipGatewayCfg OBJECT IDENTIFIER ::= { layer3Configs 2 } ipStaticRouteCfg OBJECT IDENTIFIER ::= { layer3Configs 3 } ipForwardCfg OBJECT IDENTIFIER ::= { layer3Configs 4 } ripCfg OBJECT IDENTIFIER ::= { layer3Configs 5 } vrrpCfg OBJECT IDENTIFIER ::= { layer3Configs 6 } arpCfg OBJECT IDENTIFIER ::= { layer3Configs 7 } ipBootpCfg OBJECT IDENTIFIER ::= { layer3Configs 8 } dnsCfg OBJECT IDENTIFIER ::= { layer3Configs 9 } ipNwfCfg OBJECT IDENTIFIER ::= { layer3Configs 10 } ipRmapCfg OBJECT IDENTIFIER ::= { layer3Configs 11 } bgpCfg OBJECT IDENTIFIER ::= { layer3Configs 12 } ospfCfg OBJECT IDENTIFIER ::= { layer3Configs 13 } ipGeneralCfg OBJECT IDENTIFIER ::= { layer3Configs 14 } ipStaticArpCfg OBJECT IDENTIFIER ::= { layer3Configs 15 } rip2Cfg OBJECT IDENTIFIER ::= { layer3Configs 18 } ospfv3Cfg OBJECT IDENTIFIER ::= { layer3Configs 20 } haCfg OBJECT IDENTIFIER ::= { layer3Configs 21 } ipv6StaticNbrCfg OBJECT IDENTIFIER ::= { layer3Configs 22 } bfdCfg OBJECT IDENTIFIER ::= { layer3Configs 23 } ipTunnelCfg OBJECT IDENTIFIER ::= { layer3Configs 24 } ripStats OBJECT IDENTIFIER ::= { layer3Stats 1 } arpStats OBJECT IDENTIFIER ::= { layer3Stats 2 } routeStats OBJECT IDENTIFIER ::= { layer3Stats 3 } dnsStats OBJECT IDENTIFIER ::= { layer3Stats 4 } vrrpStats OBJECT IDENTIFIER ::= { layer3Stats 5 } ospfStats OBJECT IDENTIFIER ::= { layer3Stats 6 } clearStats OBJECT IDENTIFIER ::= { layer3Stats 7 } ip6Stats OBJECT IDENTIFIER ::= { layer3Stats 10} icmp6Stats OBJECT IDENTIFIER ::= { layer3Stats 11} ip6gwStats OBJECT IDENTIFIER ::= { layer3Stats 12} rip2Stats OBJECT IDENTIFIER ::= { layer3Stats 13 } tcpStats OBJECT IDENTIFIER ::= { layer3Stats 14 } ospfv3Stats OBJECT IDENTIFIER ::= { layer3Stats 15 } vrrp6Stats OBJECT IDENTIFIER ::= { layer3Stats 16 } ipTunnelStats OBJECT IDENTIFIER ::= { layer3Stats 17 } ipRoutingInfo OBJECT IDENTIFIER ::= { layer3Info 1 } arpInfo OBJECT IDENTIFIER ::= { layer3Info 2 } vrrpInfo OBJECT IDENTIFIER ::= { layer3Info 3 } ospfinfo OBJECT IDENTIFIER ::= { layer3Info 4 } ospfv3info OBJECT IDENTIFIER ::= { layer3Info 13 } haInfo OBJECT IDENTIFIER ::= { layer3Info 14 } gatewayInfo OBJECT IDENTIFIER ::= { layer3Info 5 } nbrcacheInfo OBJECT IDENTIFIER ::= { layer3Info 7 } ipRoute6Info OBJECT IDENTIFIER ::= { layer3Info 8 } ipIntfInfo OBJECT IDENTIFIER ::= { layer3Info 9 } rip2Info OBJECT IDENTIFIER ::= { layer3Info 10 } rip2RoutesInfo OBJECT IDENTIFIER ::= { layer3Info 11 } allowedNwInfo OBJECT IDENTIFIER ::= { layer3Info 12 } vrrpOper OBJECT IDENTIFIER ::= { layer3Oper 1 } ipOper OBJECT IDENTIFIER ::= { layer3Oper 2 } haOper OBJECT IDENTIFIER ::= { layer3Oper 3 } -- IP Configuration ipInterfaceTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP interface table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipInterfaceCfg 1 } ipCurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP interface configuration. Note:This mib is not supported for VX instance of Virtualization." ::= { ipInterfaceCfg 2 } ipCurCfgIntfEntry OBJECT-TYPE SYNTAX IpCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip interface table, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipCurCfgIntfIndex } ::= { ipCurCfgIntfTable 1 } IpCurCfgIntfEntry ::= SEQUENCE { ipCurCfgIntfIndex Integer32, ipCurCfgIntfAddr IpAddress, ipCurCfgIntfMask IpAddress, ipCurCfgIntfBroadcast IpAddress, ipCurCfgIntfState INTEGER, ipCurCfgIntfBootpRelay INTEGER, ipCurCfgIntfIpVer INTEGER, ipCurCfgIntfIpv6Addr DisplayString, ipCurCfgIntfPrefixLen INTEGER, ipCurCfgIntfRouteAdv INTEGER, ipCurCfgIntfVlan Integer32, ipCurCfgIntfPeer DisplayString, ipCurCfgIntfDescription DisplayString, ipCurCfgIntfBfd INTEGER } ipCurCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the IP information is related." ::= { ipCurCfgIntfEntry 1} ipCurCfgIntfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface." ::= { ipCurCfgIntfEntry 2 } ipCurCfgIntfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the interface." ::= { ipCurCfgIntfEntry 3 } ipCurCfgIntfBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The broadcast address of the interface." ::= { ipCurCfgIntfEntry 4 } ipCurCfgIntfVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN associated with the interface." ::= { ipCurCfgIntfEntry 5 } ipCurCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the interface." ::= { ipCurCfgIntfEntry 6 } ipCurCfgIntfBootpRelay OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable BOOTP relay." ::= { ipCurCfgIntfEntry 7 } ipCurCfgIntfIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address." ::= { ipCurCfgIntfEntry 9 } ipCurCfgIntfIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the interface. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipCurCfgIntfEntry 10 } ipCurCfgIntfPrefixLen OBJECT-TYPE SYNTAX INTEGER(1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length associated with this IP address ." ::= { ipCurCfgIntfEntry 11 } ipCurCfgIntfRouteAdv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable route advertisement of the interface." ::= { ipCurCfgIntfEntry 12 } ipCurCfgIntfPeer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Peer IP of the interface." ::= { ipCurCfgIntfEntry 13 } ipCurCfgIntfDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..50)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Description of the interface." ::= { ipCurCfgIntfEntry 14 } ipCurCfgIntfBfd OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current BFD on/off configuration on the interface." ::= { ipCurCfgIntfEntry 15 } ipNewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of interface configuration in the New Configuration Block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipInterfaceCfg 3 } ipNewCfgIntfEntry OBJECT-TYPE SYNTAX IpNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip interface table, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipNewCfgIntfIndex } ::= { ipNewCfgIntfTable 1 } IpNewCfgIntfEntry ::= SEQUENCE { ipNewCfgIntfIndex Integer32, ipNewCfgIntfAddr IpAddress, ipNewCfgIntfMask IpAddress, ipNewCfgIntfBroadcast IpAddress, ipNewCfgIntfVlan Integer32, ipNewCfgIntfState INTEGER, ipNewCfgIntfBootpRelay INTEGER, ipNewCfgIntfIpVer INTEGER, ipNewCfgIntfIpv6Addr DisplayString, ipNewCfgIntfPrefixLen INTEGER, ipNewCfgIntfRouteAdv INTEGER, ipNewCfgIntfDelete INTEGER, ipNewCfgIntfPeer DisplayString, ipNewCfgIntfDescription DisplayString } ipNewCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the IP information is related." ::= { ipNewCfgIntfEntry 1 } ipNewCfgIntfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the interface." ::= { ipNewCfgIntfEntry 2 } ipNewCfgIntfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of the interface." ::= { ipNewCfgIntfEntry 3 } ipNewCfgIntfBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The broadcast address of the interface." ::= { ipNewCfgIntfEntry 4 } ipNewCfgIntfVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN associated with the interface." ::= { ipNewCfgIntfEntry 5 } ipNewCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the interface." ::= { ipNewCfgIntfEntry 6 } ipNewCfgIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgIntfEntry 7 } ipNewCfgIntfBootpRelay OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable BOOTP relay." ::= { ipNewCfgIntfEntry 8 } ipNewCfgIntfIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address." ::= { ipNewCfgIntfEntry 10 } ipNewCfgIntfIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address of the interface. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipNewCfgIntfEntry 11 } ipNewCfgIntfPrefixLen OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix length associated with this IP address ." ::= { ipNewCfgIntfEntry 12 } ipNewCfgIntfRouteAdv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable route advertisement of the interface." ::= { ipNewCfgIntfEntry 13 } ipNewCfgIntfPeer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Peer IP of the interface." ::= { ipNewCfgIntfEntry 14 } ipNewCfgIntfDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Description of the interface." ::= { ipNewCfgIntfEntry 15 } ipCurLanIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Holds the LAN interface ID, Note:This mib is not supported for VX instance of Virtualization." ::= { ipInterfaceCfg 4 } ipNewLanIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Holds the LAN interface ID, Note:This mib is not supported for VX instance of Virtualization." ::= { ipInterfaceCfg 5 } -- IP Gateway Table Configuration ipCurCfgGwMetric OBJECT-TYPE SYNTAX INTEGER { strict(1), roundrobin(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway metric. Note:This mib is not supported for VX instance of Virtualization." ::= { ipGatewayCfg 1 } ipNewCfgGwMetric OBJECT-TYPE SYNTAX INTEGER { strict(1), roundrobin(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default gateway metric. Note:This mib is not supported for VX instance of Virtualization." ::= { ipGatewayCfg 2 } ipGatewayTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP gateway table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipGatewayCfg 3 } ipCurCfgGwTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gateways in the Current configuration Block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipGatewayCfg 4 } ipCurCfgGwEntry OBJECT-TYPE SYNTAX IpCurCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip gateway table" INDEX { ipCurCfgGwIndex } ::= { ipCurCfgGwTable 1 } IpCurCfgGwEntry ::= SEQUENCE { ipCurCfgGwIndex Integer32, ipCurCfgGwAddr IpAddress, ipCurCfgGwInterval INTEGER, ipCurCfgGwRetry INTEGER, ipCurCfgGwArp INTEGER, ipCurCfgGwVlan Integer32, ipCurCfgGwIpVer INTEGER, ipCurCfgGwIpv6Addr DisplayString, ipCurCfgGwPriority INTEGER, ipCurCfgGwState INTEGER } ipCurCfgGwIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway number for which the information is related." ::= { ipCurCfgGwEntry 1} ipCurCfgGwAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the default gateway." ::= { ipCurCfgGwEntry 2 } ipCurCfgGwInterval OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-only STATUS current DESCRIPTION "The interval between ping attempts." ::= { ipCurCfgGwEntry 3 } ipCurCfgGwRetry OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed attempts to declare the default gateway DOWN." ::= { ipCurCfgGwEntry 4 } ipCurCfgGwState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the default gateway." ::= { ipCurCfgGwEntry 5 } ipCurCfgGwArp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of ARP/Neighbor Discovery health check." ::= { ipCurCfgGwEntry 6 } ipCurCfgGwVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the first 4 entries." ::= { ipCurCfgGwEntry 7 } ipCurCfgGwPriority OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the default route for this gateway. High priority means that the default gateway route will have higher priority over learned default routes. Low priority means that the default gateway route will have lower priority than learned default routes." ::= { ipCurCfgGwEntry 8 } ipCurCfgGwIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address." ::= { ipCurCfgGwEntry 9 } ipCurCfgGwIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the gateway. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipCurCfgGwEntry 10 } ipNewCfgGwTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gateway configuration in the new configuration block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipGatewayCfg 5 } ipNewCfgGwEntry OBJECT-TYPE SYNTAX IpNewCfgGwEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the Ip default gateway table, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipNewCfgGwIndex } ::= { ipNewCfgGwTable 1 } IpNewCfgGwEntry ::= SEQUENCE { ipNewCfgGwIndex Integer32, ipNewCfgGwAddr IpAddress, ipNewCfgGwInterval INTEGER, ipNewCfgGwRetry INTEGER, ipNewCfgGwState INTEGER, ipNewCfgGwArp INTEGER, ipNewCfgGwVlan Integer32, ipNewCfgGwIpVer INTEGER, ipNewCfgGwIpv6Addr DisplayString, ipNewCfgGwPriority INTEGER, ipNewCfgGwDelete INTEGER } ipNewCfgGwIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway number for which the information is related." ::= { ipNewCfgGwEntry 1} ipNewCfgGwAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the default gateway." ::= { ipNewCfgGwEntry 2 } ipNewCfgGwInterval OBJECT-TYPE SYNTAX INTEGER (0..60) MAX-ACCESS read-create STATUS current DESCRIPTION "The interval in seconds between ping attempts." ::= { ipNewCfgGwEntry 3 } ipNewCfgGwRetry OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of failed attempts to declare the default gateway DOWN." ::= { ipNewCfgGwEntry 4 } ipNewCfgGwState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the default gateway." ::= { ipNewCfgGwEntry 5 } ipNewCfgGwDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgGwEntry 6 } ipNewCfgGwArp OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the ARP/Neighbor Discovery health checks." ::= { ipNewCfgGwEntry 7 } ipNewCfgGwVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the first 4 entries." ::= { ipNewCfgGwEntry 8 } ipNewCfgGwPriority OBJECT-TYPE SYNTAX INTEGER { low(1), high(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of the default route for this gateway. High priority means that the default gateway route will have higher priority over learned default routes. Low priority means that the default gateway route will have lower priority than learned default routes." ::= { ipNewCfgGwEntry 9 } ipNewCfgGwIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address." ::= { ipNewCfgGwEntry 10 } ipNewCfgGwIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address of the gateway. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipNewCfgGwEntry 11 } -- -- IP Static Route Configuration -- ipStaticRouteTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the Static Route table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipStaticRouteCfg 1 } ipCurCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the current configuration block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipStaticRouteCfg 2 } ipCurCfgStaticRouteEntry OBJECT-TYPE SYNTAX IpCurCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipCurCfgStaticRouteIndx } ::= { ipCurCfgStaticRouteTable 1 } IpCurCfgStaticRouteEntry ::= SEQUENCE { ipCurCfgStaticRouteIndx Integer32, ipCurCfgStaticRouteDestIp IpAddress, ipCurCfgStaticRouteMask IpAddress, ipCurCfgStaticRouteGateway IpAddress, ipCurCfgStaticRouteInterface Integer32 } ipCurCfgStaticRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipCurCfgStaticRouteEntry 1} ipCurCfgStaticRouteDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticRouteEntry 2} ipCurCfgStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticRouteEntry 3} ipCurCfgStaticRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticRouteEntry 4} ipCurCfgStaticRouteInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing." ::= { ipCurCfgStaticRouteEntry 5} ipNewCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the new configuration block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipStaticRouteCfg 3 } ipNewCfgStaticRouteEntry OBJECT-TYPE SYNTAX IpNewCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipNewCfgStaticRouteIndx } ::= { ipNewCfgStaticRouteTable 1 } IpNewCfgStaticRouteEntry ::= SEQUENCE { ipNewCfgStaticRouteIndx Integer32, ipNewCfgStaticRouteDestIp IpAddress, ipNewCfgStaticRouteMask IpAddress, ipNewCfgStaticRouteGateway IpAddress, ipNewCfgStaticRouteAction INTEGER, ipNewCfgStaticRouteInterface Integer32 } ipNewCfgStaticRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipNewCfgStaticRouteEntry 1} ipNewCfgStaticRouteDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipNewCfgStaticRouteEntry 2} ipNewCfgStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of this route." ::= { ipNewCfgStaticRouteEntry 3} ipNewCfgStaticRouteGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the gateway for this route." ::= { ipNewCfgStaticRouteEntry 4} ipNewCfgStaticRouteAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgStaticRouteEntry 5 } ipNewCfgStaticRouteInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing." ::= { ipNewCfgStaticRouteEntry 6 } -- IPV6 static routes ipv6CurCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6CurCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ipv6 static routes in the current configuration block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipStaticRouteCfg 4 } ipv6CurCfgStaticRouteEntry OBJECT-TYPE SYNTAX Ipv6CurCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipv6CurCfgStaticRouteIndx } ::= { ipv6CurCfgStaticRouteTable 1 } Ipv6CurCfgStaticRouteEntry ::= SEQUENCE { ipv6CurCfgStaticRouteIndx Integer32, ipv6CurCfgStaticRouteDestIp DisplayString, ipv6CurCfgStaticRouteMask Integer32, ipv6CurCfgStaticRouteGateway DisplayString, ipv6CurCfgStaticRouteVlan Integer32 } ipv6CurCfgStaticRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ipv6 static routing table." ::= { ipv6CurCfgStaticRouteEntry 1} ipv6CurCfgStaticRouteDestIp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " The destination IPv6 address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipv6CurCfgStaticRouteEntry 2} ipv6CurCfgStaticRouteMask OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length associated with this IP address." ::= { ipv6CurCfgStaticRouteEntry 3} ipv6CurCfgStaticRouteGateway OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IPv6 gateway address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipv6CurCfgStaticRouteEntry 4} ipv6CurCfgStaticRouteVlan OBJECT-TYPE SYNTAX Integer32 (1..4090) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 Vlan of this route. The IPv6 address of the specified Vlan shall be use as source IP when performs routing." ::= { ipv6CurCfgStaticRouteEntry 5} ipv6NewCfgStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6NewCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ipv6 static routes in the current configuration block. Note:This mib is not supported for VX instance of Virtualization." ::= { ipStaticRouteCfg 5 } ipv6NewCfgStaticRouteEntry OBJECT-TYPE SYNTAX Ipv6NewCfgStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipv6NewCfgStaticRouteIndx } ::= { ipv6NewCfgStaticRouteTable 1 } Ipv6NewCfgStaticRouteEntry ::= SEQUENCE { ipv6NewCfgStaticRouteIndx Integer32, ipv6NewCfgStaticRouteDestIp DisplayString, ipv6NewCfgStaticRouteMask Integer32, ipv6NewCfgStaticRouteGateway DisplayString, ipv6NewCfgStaticRouteAction INTEGER, ipv6NewCfgStaticRouteVlan Integer32 } ipv6NewCfgStaticRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of the ipv6 static routing table." ::= { ipv6NewCfgStaticRouteEntry 1} ipv6NewCfgStaticRouteDestIp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IPv6 address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipv6NewCfgStaticRouteEntry 2} ipv6NewCfgStaticRouteMask OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix length associated with this IP address." ::= { ipv6NewCfgStaticRouteEntry 3} ipv6NewCfgStaticRouteGateway OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IPv6 gateway address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipv6NewCfgStaticRouteEntry 4} ipv6NewCfgStaticRouteAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipv6NewCfgStaticRouteEntry 5 } ipv6NewCfgStaticRouteVlan OBJECT-TYPE SYNTAX Integer32 (1..4090) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 Vlan of this route. The IPv6 address of the specified vlan shall be use as source IP when performs routing." ::= { ipv6NewCfgStaticRouteEntry 6} -- Static Tunnel Route Table IPv4 ipStaticTnlRouteTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the Static Tunnel Route table." ::= { ipStaticRouteCfg 6 } ipCurCfgStaticTnlRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the current configuration block." ::= { ipStaticRouteCfg 7 } ipCurCfgStaticTnlRouteEntry OBJECT-TYPE SYNTAX IpCurCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipCurCfgStaticTnlRouteIndx } ::= { ipCurCfgStaticTnlRouteTable 1 } IpCurCfgStaticTnlRouteEntry ::= SEQUENCE { ipCurCfgStaticTnlRouteIndx Integer32, ipCurCfgStaticTnlRouteDestIp IpAddress, ipCurCfgStaticTnlRouteMask IpAddress, ipCurCfgStaticTnlRouteTunnelId DisplayString } ipCurCfgStaticTnlRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipCurCfgStaticTnlRouteEntry 1} ipCurCfgStaticTnlRouteDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticTnlRouteEntry 2} ipCurCfgStaticTnlRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipCurCfgStaticTnlRouteEntry 3} ipCurCfgStaticTnlRouteTunnelId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tunnel ID for this route." ::= { ipCurCfgStaticTnlRouteEntry 4} ipNewCfgStaticTnlRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the new configuration block." ::= { ipStaticRouteCfg 8 } ipNewCfgStaticTnlRouteEntry OBJECT-TYPE SYNTAX IpNewCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipNewCfgStaticTnlRouteIndx } ::= { ipNewCfgStaticTnlRouteTable 1 } IpNewCfgStaticTnlRouteEntry ::= SEQUENCE { ipNewCfgStaticTnlRouteIndx Integer32, ipNewCfgStaticTnlRouteDestIp IpAddress, ipNewCfgStaticTnlRouteMask IpAddress, ipNewCfgStaticTnlRouteTunnelId DisplayString, ipNewCfgStaticTnlRouteAction INTEGER } ipNewCfgStaticTnlRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipNewCfgStaticTnlRouteEntry 1} ipNewCfgStaticTnlRouteDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipNewCfgStaticTnlRouteEntry 2} ipNewCfgStaticTnlRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of this route." ::= { ipNewCfgStaticTnlRouteEntry 3} ipNewCfgStaticTnlRouteTunnelId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Tunnel ID for this route." ::= { ipNewCfgStaticTnlRouteEntry 4} ipNewCfgStaticTnlRouteAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgStaticTnlRouteEntry 5 } -- Static Tunnel Route configuration table IPV6 ipv6CurCfgStaticTnlRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6CurCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the current configuration block." ::= { ipStaticRouteCfg 9 } ipv6CurCfgStaticTnlRouteEntry OBJECT-TYPE SYNTAX Ipv6CurCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipv6CurCfgStaticTnlRouteIndx } ::= { ipv6CurCfgStaticTnlRouteTable 1 } Ipv6CurCfgStaticTnlRouteEntry ::= SEQUENCE { ipv6CurCfgStaticTnlRouteIndx Integer32, ipv6CurCfgStaticTnlRouteDestIp DisplayString, ipv6CurCfgStaticTnlRoutePrefixLen Integer32, ipv6CurCfgStaticTnlRouteTunnelId DisplayString } ipv6CurCfgStaticTnlRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipv6CurCfgStaticTnlRouteEntry 1} ipv6CurCfgStaticTnlRouteDestIp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipv6CurCfgStaticTnlRouteEntry 2} ipv6CurCfgStaticTnlRoutePrefixLen OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipv6CurCfgStaticTnlRouteEntry 3} ipv6CurCfgStaticTnlRouteTunnelId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tunnel ID for this route." ::= { ipv6CurCfgStaticTnlRouteEntry 4} ipv6NewCfgStaticTnlRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6NewCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static routes in the new configuration block." ::= { ipStaticRouteCfg 10 } ipv6NewCfgStaticTnlRouteEntry OBJECT-TYPE SYNTAX Ipv6NewCfgStaticTnlRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IP route table" INDEX { ipv6NewCfgStaticTnlRouteIndx } ::= { ipv6NewCfgStaticTnlRouteTable 1 } Ipv6NewCfgStaticTnlRouteEntry ::= SEQUENCE { ipv6NewCfgStaticTnlRouteIndx Integer32, ipv6NewCfgStaticTnlRouteDestIp DisplayString, ipv6NewCfgStaticTnlRoutePrefixLen Integer32, ipv6NewCfgStaticTnlRouteTunnelId DisplayString, ipv6NewCfgStaticTnlRouteAction INTEGER } ipv6NewCfgStaticTnlRouteIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static routing table." ::= { ipv6NewCfgStaticTnlRouteEntry 1} ipv6NewCfgStaticTnlRouteDestIp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipv6NewCfgStaticTnlRouteEntry 2} ipv6NewCfgStaticTnlRoutePrefixLen OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of this route." ::= { ipv6NewCfgStaticTnlRouteEntry 3} ipv6NewCfgStaticTnlRouteTunnelId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Tunnel ID for this route." ::= { ipv6NewCfgStaticTnlRouteEntry 4} ipv6NewCfgStaticTnlRouteAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipv6NewCfgStaticTnlRouteEntry 5 } -- RIP version 1 Configuration ripCurCfgSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable supplying route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 1 } ripNewCfgSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable supplying route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 2 } ripCurCfgListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable listening to route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 3 } ripNewCfgListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable listening to route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 4 } ripCurCfgDefListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable listening to default routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 5 } ripNewCfgDefListen OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable listening to default routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 6 } ripCurCfgStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable supplying static route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 7 } ripNewCfgStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable supplying static route updates for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 8 } ripCurCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Update Period in seconds for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 9 } ripNewCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Update period in seconds for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 10 } ripCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP global state for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 11 } ripNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn RIP on or off for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 12 } ripCurCfgPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIPv1 poison reverse. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 13 } ripNewCfgPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "RIPv1 poison reverse. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 14 } ripCurCfgVip OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Advertise VIP Host Routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 15 } ripNewCfgVip OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise VIP Host Routes for RIPv1. RIPv1 mibs are not supported anymore. Note:This mib is not supported for VX instance of Virtualization." ::= { ripCfg 16 } -- RIP version 2 Configuration ripCurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RipCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of RIPv2 on IP interface configuration in the current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { rip2Cfg 1 } ripCurCfgIntfEntry OBJECT-TYPE SYNTAX RipCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about RIPv2 on IP interface. Note:This mib is not supported for VX instance of Virtualization." INDEX { ripCurCfgIntfIndex } ::= { ripCurCfgIntfTable 1 } RipCurCfgIntfEntry ::= SEQUENCE { ripCurCfgIntfIndex Integer32, ripCurCfgIntfVersion INTEGER, ripCurCfgIntfSupply INTEGER, ripCurCfgIntfListen INTEGER, ripCurCfgIntfDefListen INTEGER, ripCurCfgIntfTrigUpdate INTEGER, ripCurCfgIntfMcastUpdate INTEGER, ripCurCfgIntfPoisonReverse INTEGER, ripCurCfgIntfState INTEGER, ripCurCfgIntfMetric INTEGER, ripCurCfgIntfAuth INTEGER, ripCurCfgIntfKey DisplayString, ripCurCfgIntfDefault INTEGER } ripCurCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the RIPv2 information is related." ::= { ripCurCfgIntfEntry 1} ripCurCfgIntfVersion OBJECT-TYPE SYNTAX INTEGER { ripVersion1(1), ripVersion2(2), both(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP version. Only RIPv2 is supported" ::= { ripCurCfgIntfEntry 2 } ripCurCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable RIPv2 protocol." ::= { ripCurCfgIntfEntry 3 } ripCurCfgIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable listening to route updates for RIPv2." ::= { ripCurCfgIntfEntry 4 } ripCurCfgIntfDefListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Enable or disable listening to default routes for RIPv2." ::= { ripCurCfgIntfEntry 5 } ripCurCfgIntfTrigUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable triggered updates for RIPv2." ::= { ripCurCfgIntfEntry 6 } ripCurCfgIntfMcastUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable multicast updates for RIPv2." ::= { ripCurCfgIntfEntry 7 } ripCurCfgIntfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIPv2 poison reverse." ::= { ripCurCfgIntfEntry 8 } ripCurCfgIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable supplying route updates for RIPv2." ::= { ripCurCfgIntfEntry 9 } ripCurCfgIntfMetric OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "RIPv2 route metric for this interface." ::= { ripCurCfgIntfEntry 10 } ripCurCfgIntfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), password(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Authentication used on this interface for RIPv2." ::= { ripCurCfgIntfEntry 11 } ripCurCfgIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "RIPv2 update authentication password." ::= { ripCurCfgIntfEntry 12 } ripCurCfgIntfDefault OBJECT-TYPE SYNTAX INTEGER { both(1), listen(2), supply(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies what RIPv2 does with default routes." ::= { ripCurCfgIntfEntry 13 } ripNewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RipNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of RIPv2 on IP interface configuration in the new_config. Note:This mib is not supported for VX instance of Virtualization." ::= { rip2Cfg 2 } ripNewCfgIntfEntry OBJECT-TYPE SYNTAX RipNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about RIPv2 on IP interface. Note:This mib is not supported for VX instance of Virtualization." INDEX { ripNewCfgIntfIndex } ::= { ripNewCfgIntfTable 1 } RipNewCfgIntfEntry ::= SEQUENCE { ripNewCfgIntfIndex Integer32, ripNewCfgIntfVersion INTEGER, ripNewCfgIntfSupply INTEGER, ripNewCfgIntfListen INTEGER, ripNewCfgIntfDefListen INTEGER, ripNewCfgIntfTrigUpdate INTEGER, ripNewCfgIntfMcastUpdate INTEGER, ripNewCfgIntfPoisonReverse INTEGER, ripNewCfgIntfState INTEGER, ripNewCfgIntfMetric INTEGER, ripNewCfgIntfAuth INTEGER, ripNewCfgIntfKey DisplayString, ripNewCfgIntfDefault INTEGER } ripNewCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the RIPv2 information is related." ::= { ripNewCfgIntfEntry 1} ripNewCfgIntfVersion OBJECT-TYPE SYNTAX INTEGER { ripVersion1(1), ripVersion2(2), both(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "RIP version. Only RIPv2 is supported." ::= { ripNewCfgIntfEntry 2 } ripNewCfgIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable supplying route updates for RIPv2." ::= { ripNewCfgIntfEntry 3 } ripNewCfgIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable listening to route updates for RIPv2." ::= { ripNewCfgIntfEntry 4 } ripNewCfgIntfDefListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Enable or disable listening to default routes for RIPv2." ::= { ripNewCfgIntfEntry 5 } ripNewCfgIntfTrigUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable triggered updates for RIPv2." ::= { ripNewCfgIntfEntry 6 } ripNewCfgIntfMcastUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable multicast updates for RIPv2." ::= { ripNewCfgIntfEntry 7 } ripNewCfgIntfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "RIPv2 poison reverse." ::= { ripNewCfgIntfEntry 8 } ripNewCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable RIPv2 protocol." ::= { ripNewCfgIntfEntry 9 } ripNewCfgIntfMetric OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "RIPv2 route metric for this interface." ::= { ripNewCfgIntfEntry 10 } ripNewCfgIntfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), password(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of Authentication used on this interface for RIPv2." ::= { ripNewCfgIntfEntry 11 } ripNewCfgIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "RIPv2 update authentication password." ::= { ripNewCfgIntfEntry 12 } ripNewCfgIntfDefault OBJECT-TYPE SYNTAX INTEGER { both(1), listen(2), supply(3), none(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies what RIPv2 does with default routes. The default routes action could be set to listen/supply/both/none." ::= { ripNewCfgIntfEntry 13 } ripGeneral OBJECT IDENTIFIER ::= { rip2Cfg 3 } rip2CurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIPv2 global state. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 1 } rip2NewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn RIPv2 on or off. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 2 } rip2CurCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Update Period in seconds for RIPv2. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 3 } rip2NewCfgUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Update Period in seconds for RIPv2. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 4 } rip2CurCfgVip OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Advertise VIP Host Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 5 } rip2NewCfgVip OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise VIP Host Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 6 } rip2CurCfgStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Advertise Static Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 7 } rip2NewCfgStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Advertise Static Routes for RIPv2. Note:This mib is not supported for VX instance of Virtualization." ::= { ripGeneral 8 } -- IP Forwarding Configuration ipFwdGeneralCfg OBJECT IDENTIFIER ::= {ipForwardCfg 1 } ipFwdCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "IP forwarding global state. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 1 } ipFwdNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(2), off(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "IP forwarding global state. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 2 } ipFwdCurCfgDirectedBcast OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable forwarding directed broadcasts. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 3 } ipFwdNewCfgDirectedBcast OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable forwarding directed broadcasts. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 4 } ipFwdCurCfgNoICMPRedirect OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable no icmp redirects. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 5 } ipFwdNewCfgNoICMPRedirect OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable no icmp redirects. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 6 } ipFwdCurCfgRtCache OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable SP Route Caching. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 7 } ipFwdNewCfgRtCache OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable SP Route Caching. Note:This mib is not supported for VX instance of Virtualization." ::= { ipFwdGeneralCfg 8 } ipFwdPortTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP Port table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 2 } ipFwdCurCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpFwdCurCfgPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ports and their forwarding states, Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 3 } ipFwdCurCfgPortEntry OBJECT-TYPE SYNTAX IpFwdCurCfgPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ipFwdCurCfgPortTable, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipFwdCurCfgPortIndex } ::= { ipFwdCurCfgPortTable 1 } IpFwdCurCfgPortEntry ::= SEQUENCE { ipFwdCurCfgPortIndex Integer32, ipFwdCurCfgPortState INTEGER } ipFwdCurCfgPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number for which the forwarding state information pertains." ::= { ipFwdCurCfgPortEntry 1 } ipFwdCurCfgPortState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The forwarding state of the port." ::= { ipFwdCurCfgPortEntry 2 } ipFwdNewCfgPortTable OBJECT-TYPE SYNTAX SEQUENCE OF IpFwdNewCfgPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ports and their forwarding states, Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 4 } ipFwdNewCfgPortEntry OBJECT-TYPE SYNTAX IpFwdNewCfgPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ipFwdNewCfgPortTable, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipFwdNewCfgPortIndex } ::= { ipFwdNewCfgPortTable 1 } IpFwdNewCfgPortEntry ::= SEQUENCE { ipFwdNewCfgPortIndex Integer32, ipFwdNewCfgPortState INTEGER } ipFwdNewCfgPortIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number for which the forwarding state information pertains." ::= { ipFwdNewCfgPortEntry 1 } ipFwdNewCfgPortState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The forwarding state of the port." ::= { ipFwdNewCfgPortEntry 2 } ipFwdLocalTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the Local table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 5 } ipFwdCurCfgLocalTable OBJECT-TYPE SYNTAX SEQUENCE OF IpFwdCurCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of local network definition. Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 6 } ipFwdCurCfgLocalEntry OBJECT-TYPE SYNTAX IpFwdCurCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ipFwdCurCfgLocalTable, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipFwdCurCfgLocalIndex } ::= { ipFwdCurCfgLocalTable 1 } IpFwdCurCfgLocalEntry ::= SEQUENCE { ipFwdCurCfgLocalIndex Integer32, ipFwdCurCfgLocalSubnet IpAddress, ipFwdCurCfgLocalMask IpAddress } ipFwdCurCfgLocalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ipFwdCurCfgLocalTable." ::= { ipFwdCurCfgLocalEntry 1 } ipFwdCurCfgLocalSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current local IP subnet." ::= { ipFwdCurCfgLocalEntry 2 } ipFwdCurCfgLocalMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The current local IP subnet mask." ::= { ipFwdCurCfgLocalEntry 3 } ipFwdNewCfgLocalTable OBJECT-TYPE SYNTAX SEQUENCE OF IpFwdNewCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of local network definition. Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 7 } ipFwdNewCfgLocalEntry OBJECT-TYPE SYNTAX IpFwdNewCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ipFwdNewCfgLocalTable, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipFwdNewCfgLocalIndex } ::= { ipFwdNewCfgLocalTable 1 } IpFwdNewCfgLocalEntry ::= SEQUENCE { ipFwdNewCfgLocalIndex Integer32, ipFwdNewCfgLocalSubnet IpAddress, ipFwdNewCfgLocalMask IpAddress, ipFwdNewCfgLocalDelete INTEGER } ipFwdNewCfgLocalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ipFwdNewCfgLocalTable." ::= { ipFwdNewCfgLocalEntry 1 } ipFwdNewCfgLocalSubnet OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The new local IP subnet." ::= { ipFwdNewCfgLocalEntry 2 } ipFwdNewCfgLocalMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The new local IP subnet mask." ::= { ipFwdNewCfgLocalEntry 3 } ipFwdNewCfgLocalDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipFwdNewCfgLocalEntry 4 } ipv6FwdCurCfgLocalTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6FwdCurCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of local network definition. Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 8 } ipv6FwdCurCfgLocalEntry OBJECT-TYPE SYNTAX Ipv6FwdCurCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ipv6FwdCurCfgLocalTable, Note:This mib is not supported for VX instance of Virtualization." INDEX { ipv6FwdCurCfgLocalIndex } ::= { ipv6FwdCurCfgLocalTable 1 } Ipv6FwdCurCfgLocalEntry ::= SEQUENCE { ipv6FwdCurCfgLocalIndex Integer32, ipv6FwdCurCfgLocalSubnet DisplayString, ipv6FwdCurCfgLocalMask Integer32 } ipv6FwdCurCfgLocalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ipv6FwdCurCfgLocalTable." ::= { ipv6FwdCurCfgLocalEntry 1 } ipv6FwdCurCfgLocalSubnet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The current local IPv6 subnet." ::= { ipv6FwdCurCfgLocalEntry 2 } ipv6FwdCurCfgLocalMask OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The current local IPv6 subnet mask." ::= { ipv6FwdCurCfgLocalEntry 3 } ipv6FwdNewCfgLocalTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6FwdNewCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of local IPv6 network definition. Note:This mib is not supported for VX instance of Virtualization." ::= { ipForwardCfg 9 } ipv6FwdNewCfgLocalEntry OBJECT-TYPE SYNTAX Ipv6FwdNewCfgLocalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ipv6FwdNewCfgLocalTable " INDEX { ipv6FwdNewCfgLocalIndex } ::= { ipv6FwdNewCfgLocalTable 1 } Ipv6FwdNewCfgLocalEntry ::= SEQUENCE { ipv6FwdNewCfgLocalIndex Integer32, ipv6FwdNewCfgLocalSubnet DisplayString, ipv6FwdNewCfgLocalMask Integer32, ipv6FwdNewCfgLocalDelete INTEGER } ipv6FwdNewCfgLocalIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of ipv6FwdNewCfgLocalTable." ::= { ipv6FwdNewCfgLocalEntry 1 } ipv6FwdNewCfgLocalSubnet OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The new local IPv6 subnet." ::= { ipv6FwdNewCfgLocalEntry 2 } ipv6FwdNewCfgLocalMask OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The new local IPv6 subnet mask." ::= { ipv6FwdNewCfgLocalEntry 3 } ipv6FwdNewCfgLocalDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipv6FwdNewCfgLocalEntry 4 } -- -- ARP configuration -- arpCurCfgReARPPeriod OBJECT-TYPE SYNTAX INTEGER (2..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Re-ARP Period in seconds. Note:This mib is not supported for VX instance of Virtualization." ::= { arpCfg 1 } arpNewCfgReARPPeriod OBJECT-TYPE SYNTAX INTEGER (2..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Re-ARP Period in seconds. Note:This mib is not supported for VX instance of Virtualization." ::= { arpCfg 2 } -- -- IP Bootp Configration -- ipCurCfgBootpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of BOOTP server. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 1 } ipNewCfgBootpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of BOOTP server. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 2 } ipCurCfgBootpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of second BOOTP server. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 3 } ipNewCfgBootpAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of second BOOTP server. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 4 } ipCurCfgBootpState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of BOOTP relay. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 5 } ipNewCfgBootpState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of BOOTP relay. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 6 } ipCurCfgBootpPrsvPort OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable preserve source port by relay agent. Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 7 } ipNewCfgBootpPrsvPort OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable preserve source port by relay agent, Note:This mib is not supported for VX instance of Virtualization." ::= { ipBootpCfg 8 } -- VRRP (Virtual Router Redundantcy Protocol) Group vrrpGeneral OBJECT IDENTIFIER ::= { vrrpCfg 1 } vrrpCurCfgGenState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VRRP operation globally. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 1 } vrrpNewCfgGenState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable VRRP operation globally. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 2 } vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 3 } vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 4 } vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 5 } vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 6 } vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 7 } vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 8 } vrrpCurCfgGenTckL4PortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 9 } vrrpNewCfgGenTckL4PortInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 10 } vrrpCurCfgGenTckRServerInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 11 } vrrpNewCfgGenTckRServerInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 12 } vrrpCurCfgGenTckHsrpInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 13 } vrrpNewCfgGenTckHsrpInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 14 } vrrpCurCfgGenHotstandby OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable hotstandby processing. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 15 } vrrpNewCfgGenHotstandby OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable hotstandby processing. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 16 } vrrpCurCfgGenTckHsrvInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 17 } vrrpNewCfgGenTckHsrvInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 18 } vrrpCurCfgGenHoldoff OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The time for VRRP virtual router to hold before it begins to change state to backup or master state. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 19 } vrrpNewCfgGenHoldoff OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The time for VRRP virtual router to hold before it begins to change state to backup or master state. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 20 } vrrpCurCfgGenOspfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF Cost Adjustment, Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 23 } vrrpNewCfgGenOspfCost OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "OSPF Cost Adjustment, Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 24 } vrrpCurCfgGenTckSwExtInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the availability of Switch Extension in the chassis. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 25 } vrrpNewCfgGenTckSwExtInc OBJECT-TYPE SYNTAX INTEGER (0..254) MAX-ACCESS read-write STATUS current DESCRIPTION "The increment of VRRP virtual router priority. The priority is adjusted by tracking the availability of Switch Extension in the chassis. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 26 } vrrpCurCfgGenUnicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable unicast advertisement. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 27 } vrrpNewCfgGenUnicast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable unicast advertisement. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 28 } vrrpCurCfgGenFovdelay OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable the delay to process the traffic on ports during failover (hot-standby only). Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 29 } vrrpNewCfgGenFovdelay OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable the delay to process the traffic on ports during failover (hot-standby only). Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpGeneral 30 } vrrpVirtRtrTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP virtual router table. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 2 } vrrpCurCfgVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual routers configuration in current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 3 } vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpCurCfgVirtRtrIndx } ::= { vrrpCurCfgVirtRtrTable 1 } VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE { vrrpCurCfgVirtRtrIndx Integer32, vrrpCurCfgVirtRtrID INTEGER, vrrpCurCfgVirtRtrAddr IpAddress, vrrpCurCfgVirtRtrIfIndex Integer32, vrrpCurCfgVirtRtrInterval INTEGER, vrrpCurCfgVirtRtrPriority INTEGER, vrrpCurCfgVirtRtrPreempt INTEGER, vrrpCurCfgVirtRtrState INTEGER, vrrpCurCfgVirtRtrSharing INTEGER, vrrpCurCfgVirtRtrTckVirtRtr INTEGER, vrrpCurCfgVirtRtrTckIpIntf INTEGER, vrrpCurCfgVirtRtrTckL4Port INTEGER, vrrpCurCfgVirtRtrTckRServer INTEGER, vrrpCurCfgVirtRtrTckHsrp INTEGER, vrrpCurCfgVirtRtrTckHsrv INTEGER, vrrpCurCfgVirtRtrTckVlanPort INTEGER, vrrpCurCfgVirtRtrVersion INTEGER, vrrpCurCfgVirtRtrIpv6Addr DisplayString, vrrpCurCfgVirtRtrIpv6Interval INTEGER, vrrpCurCfgVirtRtrOspfCost INTEGER, vrrpCurCfgVirtRtrTckSwExt INTEGER, vrrpCurCfgVirtRtrTckIslPort INTEGER } vrrpCurCfgVirtRtrIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpCurCfgVirtRtrTableEntry 1 } vrrpCurCfgVirtRtrID OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpCurCfgVirtRtrTableEntry 2 } vrrpCurCfgVirtRtrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router IP address." ::= { vrrpCurCfgVirtRtrTableEntry 3 } vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpCurCfgVirtRtrTableEntry 4 } vrrpCurCfgVirtRtrInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpCurCfgVirtRtrTableEntry 5 } vrrpCurCfgVirtRtrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpCurCfgVirtRtrTableEntry 6 } vrrpCurCfgVirtRtrPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpCurCfgVirtRtrTableEntry 7 } vrrpCurCfgVirtRtrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 8 } vrrpCurCfgVirtRtrSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 9 } vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc." ::= { vrrpCurCfgVirtRtrTableEntry 10 } vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc." ::= { vrrpCurCfgVirtRtrTableEntry 11 } vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc." ::= { vrrpCurCfgVirtRtrTableEntry 12 } vrrpCurCfgVirtRtrTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 13 } vrrpCurCfgVirtRtrTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 14 } vrrpCurCfgVirtRtrTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 15 } vrrpCurCfgVirtRtrTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrTableEntry 16 } vrrpCurCfgVirtRtrVersion OBJECT-TYPE SYNTAX INTEGER { v4(1), v6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router IP Version." ::= { vrrpCurCfgVirtRtrTableEntry 17 } vrrpCurCfgVirtRtrIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the virtual router. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { vrrpCurCfgVirtRtrTableEntry 18 } vrrpCurCfgVirtRtrIpv6Interval OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between IPv6 VRRP advertisements in centiseconds." ::= { vrrpCurCfgVirtRtrTableEntry 19 } vrrpCurCfgVirtRtrTckSwExt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking the Switch Extension availability for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckSwExtInc." ::= { vrrpCurCfgVirtRtrTableEntry 21 } vrrpCurCfgVirtRtrOspfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF cost adjustment" ::= { vrrpCurCfgVirtRtrTableEntry 20 } vrrpCurCfgVirtRtrTckIslPort OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Include or exclude ISL ports in tracking." ::= { vrrpCurCfgVirtRtrTableEntry 22 } vrrpNewCfgVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual routers configuration in current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 4 } vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP virtual router. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpNewCfgVirtRtrIndx } ::= { vrrpNewCfgVirtRtrTable 1 } VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE { vrrpNewCfgVirtRtrIndx Integer32, vrrpNewCfgVirtRtrID INTEGER, vrrpNewCfgVirtRtrAddr IpAddress, vrrpNewCfgVirtRtrIfIndex Integer32, vrrpNewCfgVirtRtrInterval INTEGER, vrrpNewCfgVirtRtrPriority INTEGER, vrrpNewCfgVirtRtrPreempt INTEGER, vrrpNewCfgVirtRtrState INTEGER, vrrpNewCfgVirtRtrDelete INTEGER, vrrpNewCfgVirtRtrSharing INTEGER, vrrpNewCfgVirtRtrTckVirtRtr INTEGER, vrrpNewCfgVirtRtrTckIpIntf INTEGER, vrrpNewCfgVirtRtrTckL4Port INTEGER, vrrpNewCfgVirtRtrTckRServer INTEGER, vrrpNewCfgVirtRtrTckHsrp INTEGER, vrrpNewCfgVirtRtrTckHsrv INTEGER, vrrpNewCfgVirtRtrTckVlanPort INTEGER, vrrpNewCfgVirtRtrVersion INTEGER, vrrpNewCfgVirtRtrIpv6Addr DisplayString, vrrpNewCfgVirtRtrIpv6Interval INTEGER, vrrpNewCfgVirtRtrOspfCost INTEGER, vrrpNewCfgVirtRtrTckSwExt INTEGER, vrrpNewCfgVirtRtrTckIslPort INTEGER } vrrpNewCfgVirtRtrIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpNewCfgVirtRtrTableEntry 1 } vrrpNewCfgVirtRtrID OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpNewCfgVirtRtrTableEntry 2 } vrrpNewCfgVirtRtrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router IP address." ::= { vrrpNewCfgVirtRtrTableEntry 3 } vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpNewCfgVirtRtrTableEntry 4 } vrrpNewCfgVirtRtrInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpNewCfgVirtRtrTableEntry 5 } vrrpNewCfgVirtRtrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 6 } vrrpNewCfgVirtRtrPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpNewCfgVirtRtrTableEntry 7 } vrrpNewCfgVirtRtrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 8 } vrrpNewCfgVirtRtrDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row." ::= { vrrpNewCfgVirtRtrTableEntry 9 } vrrpNewCfgVirtRtrSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 10 } vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc." ::= { vrrpNewCfgVirtRtrTableEntry 11 } vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc." ::= { vrrpNewCfgVirtRtrTableEntry 12 } vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc." ::= { vrrpNewCfgVirtRtrTableEntry 13 } vrrpNewCfgVirtRtrTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 14 } vrrpNewCfgVirtRtrTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 15 } vrrpNewCfgVirtRtrTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 16 } vrrpNewCfgVirtRtrTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrTableEntry 17 } vrrpNewCfgVirtRtrVersion OBJECT-TYPE SYNTAX INTEGER { v4(1), v6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router IP Version." ::= { vrrpNewCfgVirtRtrTableEntry 18 } vrrpNewCfgVirtRtrIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address of the virtual router. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { vrrpNewCfgVirtRtrTableEntry 19 } vrrpNewCfgVirtRtrIpv6Interval OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval between IPv6 VRRP advertisements in centiseconds." ::= { vrrpNewCfgVirtRtrTableEntry 20 } vrrpNewCfgVirtRtrOspfCost OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF Cost Adjustment" ::= { vrrpNewCfgVirtRtrTableEntry 21 } vrrpNewCfgVirtRtrTckSwExt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckSwExtInc." ::= { vrrpNewCfgVirtRtrTableEntry 22 } vrrpNewCfgVirtRtrTckIslPort OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Include or exclude ISL ports in tracking." ::= { vrrpNewCfgVirtRtrTableEntry 23 } -- VRRP Interface Table vrrpIfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP interface table. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 5 } vrrpCurCfgIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP interface configuration in current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 6 } vrrpCurCfgIfTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP interface. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpCurCfgIfIndx } ::= { vrrpCurCfgIfTable 1 } VrrpCurCfgIfTableEntry ::= SEQUENCE { vrrpCurCfgIfIndx Integer32, vrrpCurCfgIfAuthType INTEGER, vrrpCurCfgIfPasswd DisplayString, vrrpCurCfgIfIpAddr IpAddress } vrrpCurCfgIfIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP interface index. This is equivalent to IfIndex." ::= { vrrpCurCfgIfTableEntry 1 } vrrpCurCfgIfAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), simple-text-password(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication." ::= { vrrpCurCfgIfTableEntry 2 } vrrpCurCfgIfPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The password for authentication." ::= { vrrpCurCfgIfTableEntry 3 } vrrpCurCfgIfIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the VRRP interface.This is equivalent to ipCurCfgIntfAddr." ::= { vrrpCurCfgIfTableEntry 4 } vrrpNewCfgIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP interface configuration in current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 7 } vrrpNewCfgIfTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgIfTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP interface. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpNewCfgIfIndx } ::= { vrrpNewCfgIfTable 1 } VrrpNewCfgIfTableEntry ::= SEQUENCE { vrrpNewCfgIfIndx Integer32, vrrpNewCfgIfAuthType INTEGER, vrrpNewCfgIfPasswd DisplayString, vrrpNewCfgIfDelete INTEGER } vrrpNewCfgIfIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP interface index. This is equivalent to IfIndex." ::= { vrrpNewCfgIfTableEntry 1 } vrrpNewCfgIfAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), simple-text-password(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication." ::= { vrrpNewCfgIfTableEntry 2 } vrrpNewCfgIfPasswd OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The password for authentication." ::= { vrrpNewCfgIfTableEntry 3 } vrrpNewCfgIfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row." ::= { vrrpNewCfgIfTableEntry 4 } -- Failover Virtual Router Groups vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP Group table. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 8 } vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router group in current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 9 } vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP failover virtual router. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpCurCfgVirtRtrGrpIndx } ::= { vrrpCurCfgVirtRtrGrpTable 1 } VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE { vrrpCurCfgVirtRtrGrpIndx Integer32, vrrpCurCfgVirtRtrGrpID INTEGER, vrrpCurCfgVirtRtrGrpIfIndex Integer32, vrrpCurCfgVirtRtrGrpInterval INTEGER, vrrpCurCfgVirtRtrGrpPriority INTEGER, vrrpCurCfgVirtRtrGrpPreempt INTEGER, vrrpCurCfgVirtRtrGrpState INTEGER, vrrpCurCfgVirtRtrGrpSharing INTEGER, vrrpCurCfgVirtRtrGrpTckVirtRtr INTEGER, vrrpCurCfgVirtRtrGrpTckIpIntf INTEGER, vrrpCurCfgVirtRtrGrpTckVlanPort INTEGER, vrrpCurCfgVirtRtrGrpTckL4Port INTEGER, vrrpCurCfgVirtRtrGrpTckRServer INTEGER, vrrpCurCfgVirtRtrGrpTckHsrp INTEGER, vrrpCurCfgVirtRtrGrpTckHsrv INTEGER, vrrpCurCfgVirtRtrGrpVersion INTEGER, vrrpCurCfgVirtRtrGrpIpv6Interval INTEGER, vrrpCurCfgVirtRtrGrpOspfCost INTEGER, vrrpCurCfgVirtRtrGrpTckSwExt INTEGER, vrrpCurCfgVirtRtrGrpTckIslPort INTEGER } vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpCurCfgVirtRtrGrpTableEntry 1 } vrrpCurCfgVirtRtrGrpID OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpCurCfgVirtRtrGrpTableEntry 2 } vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpCurCfgVirtRtrGrpTableEntry 3 } vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpCurCfgVirtRtrGrpTableEntry 4 } vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpCurCfgVirtRtrGrpTableEntry 5 } vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpCurCfgVirtRtrGrpTableEntry 6 } vrrpCurCfgVirtRtrGrpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 7 } vrrpCurCfgVirtRtrGrpSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 8 } vrrpCurCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 9 } vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 10 } vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 11 } vrrpCurCfgVirtRtrGrpTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 12 } vrrpCurCfgVirtRtrGrpTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 13 } vrrpCurCfgVirtRtrGrpTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 14 } vrrpCurCfgVirtRtrGrpTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrGrpTableEntry 15 } vrrpCurCfgVirtRtrGrpVersion OBJECT-TYPE SYNTAX INTEGER { v4(1), v6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router group IP Version." ::= { vrrpCurCfgVirtRtrGrpTableEntry 16 } vrrpCurCfgVirtRtrGrpIpv6Interval OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval between IPv6 VRRP advertisements in centiseconds." ::= { vrrpCurCfgVirtRtrGrpTableEntry 17 } vrrpCurCfgVirtRtrGrpOspfCost OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF Cost Adjustment" ::= { vrrpCurCfgVirtRtrGrpTableEntry 18 } vrrpCurCfgVirtRtrGrpTckSwExt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckSwExtInc." ::= { vrrpCurCfgVirtRtrGrpTableEntry 19 } vrrpCurCfgVirtRtrGrpTckIslPort OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Include or exclude ISL ports in tracking." ::= { vrrpCurCfgVirtRtrGrpTableEntry 20 } vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router group configuration in new_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 10 } vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgVirtRtrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VRRP failover virtual router. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpNewCfgVirtRtrGrpIndx } ::= { vrrpNewCfgVirtRtrGrpTable 1 } VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE { vrrpNewCfgVirtRtrGrpIndx Integer32, vrrpNewCfgVirtRtrGrpID INTEGER, vrrpNewCfgVirtRtrGrpIfIndex Integer32, vrrpNewCfgVirtRtrGrpInterval INTEGER, vrrpNewCfgVirtRtrGrpPriority INTEGER, vrrpNewCfgVirtRtrGrpPreempt INTEGER, vrrpNewCfgVirtRtrGrpState INTEGER, vrrpNewCfgVirtRtrGrpDelete INTEGER, vrrpNewCfgVirtRtrGrpSharing INTEGER, vrrpNewCfgVirtRtrGrpTckVirtRtr INTEGER, vrrpNewCfgVirtRtrGrpTckIpIntf INTEGER, vrrpNewCfgVirtRtrGrpTckVlanPort INTEGER, vrrpNewCfgVirtRtrGrpTckL4Port INTEGER, vrrpNewCfgVirtRtrGrpTckRServer INTEGER, vrrpNewCfgVirtRtrGrpTckHsrp INTEGER, vrrpNewCfgVirtRtrGrpTckHsrv INTEGER, vrrpNewCfgVirtRtrGrpVersion INTEGER, vrrpNewCfgVirtRtrGrpIpv6Interval INTEGER, vrrpNewCfgVirtRtrGrpOspfCost INTEGER, vrrpNewCfgVirtRtrGrpTckSwExt INTEGER, vrrpNewCfgVirtRtrGrpTckIslPort INTEGER } vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router table index." ::= { vrrpNewCfgVirtRtrGrpTableEntry 1 } vrrpNewCfgVirtRtrGrpID OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router identifier." ::= { vrrpNewCfgVirtRtrGrpTableEntry 2 } vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IfIndex that the VRRP virtual router is representing." ::= { vrrpNewCfgVirtRtrGrpTableEntry 3 } vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval between VRRP advertisements in seconds." ::= { vrrpNewCfgVirtRtrGrpTableEntry 4 } vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 5 } vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption" ::= { vrrpNewCfgVirtRtrGrpTableEntry 6 } vrrpNewCfgVirtRtrGrpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 7 } vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row." ::= { vrrpNewCfgVirtRtrGrpTableEntry 8 } vrrpNewCfgVirtRtrGrpSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable load sharing of non-master virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 9 } vrrpNewCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 10 } vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 11 } vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 12 } vrrpNewCfgVirtRtrGrpTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 13 } vrrpNewCfgVirtRtrGrpTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 14 } vrrpNewCfgVirtRtrGrpTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 15 } vrrpNewCfgVirtRtrGrpTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrGrpTableEntry 16 } vrrpNewCfgVirtRtrGrpVersion OBJECT-TYPE SYNTAX INTEGER { v4(1), v6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router group IP Version." ::= { vrrpNewCfgVirtRtrGrpTableEntry 17 } vrrpNewCfgVirtRtrGrpIpv6Interval OBJECT-TYPE SYNTAX INTEGER (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval between IPv6 VRRP advertisements in centiseconds." ::= { vrrpNewCfgVirtRtrGrpTableEntry 18 } vrrpNewCfgVirtRtrGrpOspfCost OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF Cost Adjustment" ::= { vrrpNewCfgVirtRtrGrpTableEntry 19 } vrrpNewCfgVirtRtrGrpTckSwExt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckSwExtInc." ::= { vrrpNewCfgVirtRtrGrpTableEntry 20 } vrrpNewCfgVirtRtrGrpTckIslPort OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Include or exclude ISL ports in tracking." ::= { vrrpNewCfgVirtRtrGrpTableEntry 21 } vrrpVirtRtrVrGrpTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in VRRP VrGroup table. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 11 } vrrpCurCfgVirtRtrVrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpCurCfgVirtRtrVrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router vrgroup configuration in the current config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 12 } vrrpCurCfgVirtRtrVrGrpTableEntry OBJECT-TYPE SYNTAX VrrpCurCfgVirtRtrVrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about setting VRRP virtual router vrgroup. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpCurCfgVirtRtrVrGrpIndx } ::= { vrrpCurCfgVirtRtrVrGrpTable 1 } VrrpCurCfgVirtRtrVrGrpTableEntry ::= SEQUENCE { vrrpCurCfgVirtRtrVrGrpIndx Integer32, vrrpCurCfgVirtRtrVrGrpName DisplayString, vrrpCurCfgVirtRtrVrGrpState INTEGER, vrrpCurCfgVirtRtrVrGrpBmap OCTET STRING, vrrpCurCfgVirtRtrVrGrpPriority INTEGER, vrrpCurCfgVirtRtrVrGrpTckIpIntf INTEGER, vrrpCurCfgVirtRtrVrGrpTckVlanPort INTEGER, vrrpCurCfgVirtRtrVrGrpTckL4Port INTEGER, vrrpCurCfgVirtRtrVrGrpTckRServer INTEGER, vrrpCurCfgVirtRtrVrGrpTckHsrp INTEGER, vrrpCurCfgVirtRtrVrGrpTckHsrv INTEGER, vrrpCurCfgVirtRtrVrGrpTckVirtRtrNo INTEGER, vrrpCurCfgVirtRtrVrGrpAdd INTEGER, vrrpCurCfgVirtRtrVrGrpAdverInterval INTEGER, vrrpCurCfgVirtRtrVrGrpPreemption INTEGER, vrrpCurCfgVirtRtrVrGrpSharing INTEGER, vrrpCurCfgVirtRtrVrGrpOspfCost INTEGER, vrrpCurCfgVirtRtrVrGrpTckSwExt INTEGER, vrrpCurCfgVirtRtrVrGrpTckIslPort INTEGER } vrrpCurCfgVirtRtrVrGrpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router vrgroup table index." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 1 } vrrpCurCfgVirtRtrVrGrpName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router vrgroup name." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 2 } vrrpCurCfgVirtRtrVrGrpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VRRP Vrgroup state " ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 3 } vrrpCurCfgVirtRtrVrGrpBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual routers added for to this VRRP vrgroup. The selected virtual routers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Virtual Router 9 || || || ||___ Virtual Router 8 || |____ Virtual Router 7 || . . . ||_________ Virtual Router 2 |__________ Virtual Router 1 where x : 1 - The represented Virtual Router is added 0 - The represented Virtual Router is not added" ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 4 } vrrpCurCfgVirtRtrVrGrpPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 5 } vrrpCurCfgVirtRtrVrGrpTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking interfaces in vrgroup for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 6 } vrrpCurCfgVirtRtrVrGrpTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 7 } vrrpCurCfgVirtRtrVrGrpTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 8 } vrrpCurCfgVirtRtrVrGrpTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 9 } vrrpCurCfgVirtRtrVrGrpTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 10 } vrrpCurCfgVirtRtrVrGrpTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 11 } vrrpCurCfgVirtRtrVrGrpTckVirtRtrNo OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "The track virtual router for group." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 12 } vrrpCurCfgVirtRtrVrGrpAdd OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify virtual router number which needs to be added to group." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 13 } vrrpCurCfgVirtRtrVrGrpAdverInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The advertisement interval for virtual router group." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 14 } vrrpCurCfgVirtRtrVrGrpPreemption OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable preemption for virtual router group." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 15 } vrrpCurCfgVirtRtrVrGrpSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/Disable sharing for virtual router group." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 16 } vrrpCurCfgVirtRtrVrGrpOspfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF Cost Adjustment" ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 17 } vrrpCurCfgVirtRtrVrGrpTckSwExt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckSwExtInc." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 18 } vrrpCurCfgVirtRtrVrGrpTckIslPort OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Include or exclude ISL ports in tracking." ::= { vrrpCurCfgVirtRtrVrGrpTableEntry 19 } vrrpNewCfgVirtRtrVrGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpNewCfgVirtRtrVrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router vrgroup configuration in new_config. Note:This mib is not supported for VX instance of Virtualization." ::= { vrrpCfg 13 } vrrpNewCfgVirtRtrVrGrpTableEntry OBJECT-TYPE SYNTAX VrrpNewCfgVirtRtrVrGrpTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about setting VRRP virtual router Vrgroup. Note:This mib is not supported for VX instance of Virtualization." INDEX { vrrpNewCfgVirtRtrVrGrpIndx } ::= { vrrpNewCfgVirtRtrVrGrpTable 1 } VrrpNewCfgVirtRtrVrGrpTableEntry ::= SEQUENCE { vrrpNewCfgVirtRtrVrGrpIndx Integer32, vrrpNewCfgVirtRtrVrGrpName DisplayString, vrrpNewCfgVirtRtrVrGrpAdd INTEGER, vrrpNewCfgVirtRtrVrGrpRem INTEGER, vrrpNewCfgVirtRtrVrGrpState INTEGER, vrrpNewCfgVirtRtrVrGrpDelete INTEGER, vrrpNewCfgVirtRtrVrGrpBmap OCTET STRING, vrrpNewCfgVirtRtrVrGrpPriority INTEGER, vrrpNewCfgVirtRtrVrGrpTckIpIntf INTEGER, vrrpNewCfgVirtRtrVrGrpTckVlanPort INTEGER, vrrpNewCfgVirtRtrVrGrpTckL4Port INTEGER, vrrpNewCfgVirtRtrVrGrpTckRServer INTEGER, vrrpNewCfgVirtRtrVrGrpTckHsrp INTEGER, vrrpNewCfgVirtRtrVrGrpTckHsrv INTEGER, vrrpNewCfgVirtRtrVrGrpTckVirtRtrNo INTEGER, vrrpNewCfgVirtRtrVrGrpAdverInterval INTEGER, vrrpNewCfgVirtRtrVrGrpPreemption INTEGER, vrrpNewCfgVirtRtrVrGrpSharing INTEGER, vrrpNewCfgVirtRtrVrGrpOspfCost INTEGER, vrrpNewCfgVirtRtrVrGrpTckSwExt INTEGER, vrrpNewCfgVirtRtrVrGrpTckIslPort INTEGER } vrrpNewCfgVirtRtrVrGrpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router vrgroup table index." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 1 } vrrpNewCfgVirtRtrVrGrpName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router vrgroup name." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 2 } vrrpNewCfgVirtRtrVrGrpAdd OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router to be added to this vrgroup table." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 3 } vrrpNewCfgVirtRtrVrGrpRem OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The VRRP virtual router to be removed from this vrgroup table." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 4 } vrrpNewCfgVirtRtrVrGrpState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable VRRP Vrgroup state " ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 5 } vrrpNewCfgVirtRtrVrGrpDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 6 } vrrpNewCfgVirtRtrVrGrpBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual routers added to this VRRP vrgroup. The selected virtual routers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Virtual Router 9 || || || ||___ Virtual Router 8 || |____ Virtual Router 7 || . . . ||_________ Virtual Router 2 |__________ Virtual Router 1 where x : 1 - The represented Virtual Router is added 0 - The represented Virtual Router is not added" ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 7 } vrrpNewCfgVirtRtrVrGrpPriority OBJECT-TYPE SYNTAX INTEGER (1..254) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority value to be used by the specified VRRP virtual routers." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 8 } vrrpNewCfgVirtRtrVrGrpTckIpIntf OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking interfaces in vrgroup for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 9 } vrrpNewCfgVirtRtrVrGrpTckVlanPort OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 10 } vrrpNewCfgVirtRtrVrGrpTckL4Port OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 11 } vrrpNewCfgVirtRtrVrGrpTckRServer OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 12 } vrrpNewCfgVirtRtrVrGrpTckHsrp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 13 } vrrpNewCfgVirtRtrVrGrpTckHsrv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 14 } vrrpNewCfgVirtRtrVrGrpTckVirtRtrNo OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS read-create STATUS current DESCRIPTION "The track virtual router for group." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 15 } vrrpNewCfgVirtRtrVrGrpAdverInterval OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The advertisement interval for virtual router group." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 16 } vrrpNewCfgVirtRtrVrGrpPreemption OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable preemption for virtual router group." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 17 } vrrpNewCfgVirtRtrVrGrpSharing OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable sharing for virtual router group." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 18 } vrrpNewCfgVirtRtrVrGrpOspfCost OBJECT-TYPE SYNTAX INTEGER (0..65536) MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF Cost Adjustment" ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 19 } vrrpNewCfgVirtRtrVrGrpTckSwExt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking Switch Extension availability for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckSwExtInc." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 20 } vrrpNewCfgVirtRtrVrGrpTckIslPort OBJECT-TYPE SYNTAX INTEGER { include(1), exclude(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Include or exclude ISL ports in tracking." ::= { vrrpNewCfgVirtRtrVrGrpTableEntry 21 } -- Domain Name Server Configuration dnsCurCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS primary IP address in the current_configuration block." ::= { dnsCfg 1 } dnsNewCfgPrimaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS primary IP address in the new_configuration block." ::= { dnsCfg 2 } dnsCurCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS secondary IP address in the current_configuration block." ::= { dnsCfg 3 } dnsNewCfgSecondaryIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS secondary IP address in the new_configuration block." ::= { dnsCfg 4 } dnsCurCfgDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..191)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS doamin name in the current_configuration block." ::= { dnsCfg 5 } dnsNewCfgDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..191)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS doamin name in the new_configuration block." ::= { dnsCfg 6 } dnsCurCfgPrimaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS primary IPv6 address in the current_configuration block." ::= { dnsCfg 7 } dnsNewCfgPrimaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS primary IPv6 address in the new_configuration block." ::= { dnsCfg 8 } dnsCurCfgSecondaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS secondary IPv6 address in the current_configuration block." ::= { dnsCfg 9 } dnsNewCfgSecondaryIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "The DNS secondary IPv6 address in the new_configuration block." ::= { dnsCfg 10 } -- -- IP network filter configuration -- ipNwfTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP network filter table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipNwfCfg 1 } ipCurCfgNwfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP network filter configuration in the current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { ipNwfCfg 2 } ipCurCfgNwfEntry OBJECT-TYPE SYNTAX IpCurCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP network filter. Note:This mib is not supported for VX instance of Virtualization." INDEX { ipCurCfgNwfIndex } ::= { ipCurCfgNwfTable 1 } IpCurCfgNwfEntry ::= SEQUENCE { ipCurCfgNwfIndex Integer32, ipCurCfgNwfAddr IpAddress, ipCurCfgNwfMask IpAddress, ipCurCfgNwfState INTEGER, ipCurCfgNwfIpVer INTEGER, ipCurCfgNwfIpv6Addr DisplayString, ipCurCfgNwfIpv6Mask INTEGER } ipCurCfgNwfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The network filter number for which the NWF is related." ::= { ipCurCfgNwfEntry 1} ipCurCfgNwfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the network filter." ::= { ipCurCfgNwfEntry 2 } ipCurCfgNwfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the network filter." ::= { ipCurCfgNwfEntry 3 } ipCurCfgNwfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the network filter." ::= { ipCurCfgNwfEntry 4 } ipCurCfgNwfIpVer OBJECT-TYPE SYNTAX INTEGER { v4(0), v6(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address Version" ::= { ipCurCfgNwfEntry 5 } ipCurCfgNwfIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the network filter." ::= { ipCurCfgNwfEntry 6 } ipCurCfgNwfIpv6Mask OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 prefix mask of the network filter.." ::= { ipCurCfgNwfEntry 7 } ipNewCfgNwfTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP network filter configuration in the current_config. Note:This mib is not supported for VX instance of Virtualization." ::= { ipNwfCfg 3 } ipNewCfgNwfEntry OBJECT-TYPE SYNTAX IpNewCfgNwfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP network filter. Note:This mib is not supported for VX instance of Virtualization." INDEX { ipNewCfgNwfIndex } ::= { ipNewCfgNwfTable 1 } IpNewCfgNwfEntry ::= SEQUENCE { ipNewCfgNwfIndex Integer32, ipNewCfgNwfAddr IpAddress, ipNewCfgNwfMask IpAddress, ipNewCfgNwfState INTEGER, ipNewCfgNwfDelete INTEGER, ipNewCfgNwfIpVer INTEGER, ipNewCfgNwfIpv6Addr DisplayString, ipNewCfgNwfIpv6Mask INTEGER } ipNewCfgNwfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The network filter number for which the NWF is related." ::= { ipNewCfgNwfEntry 1} ipNewCfgNwfAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the network filter." ::= { ipNewCfgNwfEntry 2 } ipNewCfgNwfMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of the network filter." ::= { ipNewCfgNwfEntry 3 } ipNewCfgNwfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the network filter." ::= { ipNewCfgNwfEntry 4 } ipNewCfgNwfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgNwfEntry 5 } ipNewCfgNwfIpVer OBJECT-TYPE SYNTAX INTEGER { v4(0), v6(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address Version" ::= { ipNewCfgNwfEntry 6 } ipNewCfgNwfIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address of the network filter." ::= { ipNewCfgNwfEntry 7 } ipNewCfgNwfIpv6Mask OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 prefix mask of the network filter.." ::= { ipNewCfgNwfEntry 8 } -- -- IP route map configuration -- ipRmapTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP route map table. Note:This mib is not supported for VX instance of Virtualization." ::= { ipRmapCfg 1 } ipCurCfgRmapTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map configuration in the current_config." ::= { ipRmapCfg 2 } ipCurCfgRmapEntry OBJECT-TYPE SYNTAX IpCurCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipCurCfgRmapIndex } ::= { ipCurCfgRmapTable 1 } IpCurCfgRmapEntry ::= SEQUENCE { ipCurCfgRmapIndex Integer32, ipCurCfgRmapLp Unsigned32, ipCurCfgRmapMetric Unsigned32, ipCurCfgRmapPrec INTEGER, ipCurCfgRmapWeight INTEGER, ipCurCfgRmapState INTEGER, ipCurCfgRmapMetricType INTEGER, ipCurCfgRmapAp DisplayString } ipCurCfgRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipCurCfgRmapEntry 1} ipCurCfgRmapLp OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The local-preference of the route map. 4294967295 means none" ::= { ipCurCfgRmapEntry 2 } ipCurCfgRmapMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric of the route map. 4294967295 means none" ::= { ipCurCfgRmapEntry 3 } ipCurCfgRmapPrec OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The precedence of the route map." ::= { ipCurCfgRmapEntry 4 } ipCurCfgRmapWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The weight of the route map. 65535 means none" ::= { ipCurCfgRmapEntry 5 } ipCurCfgRmapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map." ::= { ipCurCfgRmapEntry 6 } ipCurCfgRmapAp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..18)) MAX-ACCESS read-only STATUS current DESCRIPTION "The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]" ::= { ipCurCfgRmapEntry 7 } ipCurCfgRmapMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF metric-type of the matched route." ::= { ipCurCfgRmapEntry 8 } ipNewCfgRmapTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map configuration in the current_config." ::= { ipRmapCfg 3 } ipNewCfgRmapEntry OBJECT-TYPE SYNTAX IpNewCfgRmapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipNewCfgRmapIndex } ::= { ipNewCfgRmapTable 1 } IpNewCfgRmapEntry ::= SEQUENCE { ipNewCfgRmapIndex Integer32, ipNewCfgRmapLp Unsigned32, ipNewCfgRmapMetric Unsigned32, ipNewCfgRmapPrec INTEGER, ipNewCfgRmapWeight INTEGER, ipNewCfgRmapState INTEGER, ipNewCfgRmapAp DisplayString, ipNewCfgRmapMetricType INTEGER, ipNewCfgRmapDelete INTEGER } ipNewCfgRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipNewCfgRmapEntry 1} ipNewCfgRmapLp OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The local-preference of the route map. 4294967295 means none" ::= { ipNewCfgRmapEntry 2 } ipNewCfgRmapMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The metric of the route map. 4294967295 means none" ::= { ipNewCfgRmapEntry 3 } ipNewCfgRmapPrec OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The precedence of the route map." ::= { ipNewCfgRmapEntry 4 } ipNewCfgRmapWeight OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The weight of the route map. 65535 means none" ::= { ipNewCfgRmapEntry 5 } ipNewCfgRmapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the route map." ::= { ipNewCfgRmapEntry 6 } ipNewCfgRmapAp OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]" ::= { ipNewCfgRmapEntry 7 } ipNewCfgRmapMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF metric-type of the matched route." ::= { ipNewCfgRmapEntry 8 } ipNewCfgRmapDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgRmapEntry 9 } ipAlistTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP route map table." ::= { ipRmapCfg 4 } ipCurCfgAlistTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access list configuration in the current_config." ::= { ipRmapCfg 5 } ipCurCfgAlistEntry OBJECT-TYPE SYNTAX IpCurCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipCurCfgAlistRmapIndex, ipCurCfgAlistIndex } ::= { ipCurCfgAlistTable 1 } IpCurCfgAlistEntry ::= SEQUENCE { ipCurCfgAlistRmapIndex Integer32, ipCurCfgAlistIndex Integer32, ipCurCfgAlistNwf INTEGER, ipCurCfgAlistMetric Unsigned32, ipCurCfgAlistAction INTEGER, ipCurCfgAlistState INTEGER, ipCurCfgAlistNwc DisplayString } ipCurCfgAlistRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipCurCfgAlistEntry 1 } ipCurCfgAlistIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access list number for which the access list is related." ::= { ipCurCfgAlistEntry 2 } ipCurCfgAlistNwf OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The network filter number of the route map access list. 0 means none" ::= { ipCurCfgAlistEntry 3 } ipCurCfgAlistMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric of the route map access list. 4294967295 means none" ::= { ipCurCfgAlistEntry 4 } ipCurCfgAlistAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action of the route map access list." ::= { ipCurCfgAlistEntry 5 } ipCurCfgAlistState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map access list." ::= { ipCurCfgAlistEntry 6 } ipCurCfgAlistNwc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The network classifier of the route map access list. 'none' means no network class configured." ::= { ipCurCfgAlistEntry 7 } ipNewCfgAlistTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access list configuration in the current_config." ::= { ipRmapCfg 6 } ipNewCfgAlistEntry OBJECT-TYPE SYNTAX IpNewCfgAlistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipNewCfgAlistRmapIndex, ipNewCfgAlistIndex } ::= { ipNewCfgAlistTable 1 } IpNewCfgAlistEntry ::= SEQUENCE { ipNewCfgAlistRmapIndex Integer32, ipNewCfgAlistIndex Integer32, ipNewCfgAlistNwf INTEGER, ipNewCfgAlistMetric Unsigned32, ipNewCfgAlistAction INTEGER, ipNewCfgAlistState INTEGER, ipNewCfgAlistDelete INTEGER, ipNewCfgAlistNwc DisplayString, ipNewCfgAlistNwType INTEGER } ipNewCfgAlistRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipNewCfgAlistEntry 1 } ipNewCfgAlistIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access list number for which the access list is related." ::= { ipNewCfgAlistEntry 2 } ipNewCfgAlistNwf OBJECT-TYPE SYNTAX INTEGER (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The network filter number of the route map access list. 0 means none" ::= { ipNewCfgAlistEntry 3 } ipNewCfgAlistMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The metric of the route map access list. 4294967295 means none" ::= { ipNewCfgAlistEntry 4 } ipNewCfgAlistAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Action of the route map access list." ::= { ipNewCfgAlistEntry 5 } ipNewCfgAlistState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the route map access list." ::= { ipNewCfgAlistEntry 6 } ipNewCfgAlistDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgAlistEntry 7 } ipNewCfgAlistNwc OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The network classifier of the route map access list. 'none' means no network class configured." ::= { ipNewCfgAlistEntry 8 } ipNewCfgAlistNwType OBJECT-TYPE SYNTAX INTEGER { network-filter(1), network-class(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Is the alist configured to network filter type or network class type." ::= { ipNewCfgAlistEntry 9 } ipAspathTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IP route map table." ::= { ipRmapCfg 7 } ipCurCfgAspathTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access path configuration." ::= { ipRmapCfg 8 } ipCurCfgAspathEntry OBJECT-TYPE SYNTAX IpCurCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipCurCfgAspathRmapIndex, ipCurCfgAlistIndex } ::= { ipCurCfgAspathTable 1 } IpCurCfgAspathEntry ::= SEQUENCE { ipCurCfgAspathRmapIndex Integer32, ipCurCfgAspathIndex Integer32, ipCurCfgAspathAS INTEGER, ipCurCfgAspathAction INTEGER, ipCurCfgAspathState INTEGER } ipCurCfgAspathRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipCurCfgAspathEntry 1 } ipCurCfgAspathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access path number for which the access list is related." ::= { ipCurCfgAspathEntry 2 } ipCurCfgAspathAS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The AS number of the route map access path. 0 means none" ::= { ipCurCfgAspathEntry 3 } ipCurCfgAspathAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Action of the route map access path." ::= { ipCurCfgAspathEntry 4 } ipCurCfgAspathState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the route map access path." ::= { ipCurCfgAspathEntry 5 } ipNewCfgAspathTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP route map access path configuration" ::= { ipRmapCfg 9 } ipNewCfgAspathEntry OBJECT-TYPE SYNTAX IpNewCfgAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an IP route map." INDEX { ipNewCfgAspathRmapIndex, ipNewCfgAspathIndex } ::= { ipNewCfgAspathTable 1 } IpNewCfgAspathEntry ::= SEQUENCE { ipNewCfgAspathRmapIndex Integer32, ipNewCfgAspathIndex Integer32, ipNewCfgAspathAS Unsigned32, ipNewCfgAspathAction INTEGER, ipNewCfgAspathState INTEGER, ipNewCfgAspathDelete INTEGER } ipNewCfgAspathRmapIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The route map number for which the RMAP is related." ::= { ipNewCfgAspathEntry 1 } ipNewCfgAspathIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The access path number for which the access list is related." ::= { ipNewCfgAspathEntry 2 } ipNewCfgAspathAS OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-create STATUS current DESCRIPTION "The AS number of the route map access path. 0 means none" ::= { ipNewCfgAspathEntry 3 } ipNewCfgAspathAction OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Action of the route map access path." ::= { ipNewCfgAspathEntry 4 } ipNewCfgAspathState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the route map access path." ::= { ipNewCfgAspathEntry 5 } ipNewCfgAspathDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgAspathEntry 6 } -- -- IP BGP configuration -- bgpGeneral OBJECT IDENTIFIER ::= { bgpCfg 1 } bgpCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "BGP global state." ::= { bgpGeneral 1 } bgpNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn BGP on or off." ::= { bgpGeneral 2 } bgpCurCfgLocalPref OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "Local preference value." ::= { bgpGeneral 3 } bgpNewCfgLocalPref OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "Local Preference value." ::= { bgpGeneral 4 } bgpCurCfgMaxASPath OBJECT-TYPE SYNTAX Unsigned32 (1..127) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum AS Path Length." ::= { bgpGeneral 5 } bgpNewCfgMaxASPath OBJECT-TYPE SYNTAX Unsigned32 (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum AS Path Length." ::= { bgpGeneral 6 } bgpCurCfgASNumber OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Current autonomous system number." ::= { bgpGeneral 7 } bgpNewCfgASNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-write STATUS current DESCRIPTION "New autonomous system number.Enter 0 to delete this number." ::= { bgpGeneral 8 } bgpCurCfgStopVipAdv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Stop VIP advertisement." ::= { bgpGeneral 9 } bgpNewCfgStopVipAdv OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Stop VIP advertisement." ::= { bgpGeneral 10 } bgpCurCfgAdvFip OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Advertise floating IP state." ::= { bgpGeneral 11 } bgpNewCfgAdvFip OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Advertising floating IP : on or off." ::= { bgpGeneral 12 } bgpPeerTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the BGP peer table." ::= { bgpCfg 2 } bgpCurCfgPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpCurCfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of BGP peer configuration in the current_config." ::= { bgpCfg 3 } bgpCurCfgPeerEntry OBJECT-TYPE SYNTAX BgpCurCfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a BGP peer." INDEX { bgpCurCfgPeerIndex } ::= { bgpCurCfgPeerTable 1 } BgpCurCfgPeerEntry ::= SEQUENCE { bgpCurCfgPeerIndex Integer32, bgpCurCfgPeerRemoteAddr IpAddress, bgpCurCfgPeerRemoteAs INTEGER, bgpCurCfgPeerTtl INTEGER, bgpCurCfgPeerState INTEGER, bgpCurCfgPeerMetric Unsigned32, bgpCurCfgPeerDefaultAction INTEGER, bgpCurCfgPeerOspfState INTEGER, bgpCurCfgPeerFixedState INTEGER, bgpCurCfgPeerStaticState INTEGER, bgpCurCfgPeerVipState INTEGER, bgpCurCfgPeerInRmapList OCTET STRING, bgpCurCfgPeerOutRmapList OCTET STRING, bgpCurCfgPeerHoldTime INTEGER, bgpCurCfgPeerKeepAlive INTEGER, bgpCurCfgPeerMinTime INTEGER, bgpCurCfgPeerConRetry INTEGER, bgpCurCfgPeerMinAS INTEGER, bgpCurCfgPeerRipState INTEGER, bgpCurCfgPeerDenyState INTEGER, bgpCurCfgPeerNextHop IpAddress, bgpCurCfgPeerBfdState INTEGER } bgpCurCfgPeerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP peer number for which the BGP peer table is related." ::= { bgpCurCfgPeerEntry 1 } bgpCurCfgPeerRemoteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The remote IP address of the BGP peer." ::= { bgpCurCfgPeerEntry 2 } bgpCurCfgPeerRemoteAs OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote AS number of the BGP peer. 0 means none" ::= { bgpCurCfgPeerEntry 3 } bgpCurCfgPeerTtl OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The time-to-live value of the BGP peer IP datagram. " ::= { bgpCurCfgPeerEntry 4 } bgpCurCfgPeerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the peer." ::= { bgpCurCfgPeerEntry 5 } bgpCurCfgPeerMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric value of the BGP peer. A value of '0' means none" ::= { bgpCurCfgPeerEntry 10 } bgpCurCfgPeerDefaultAction OBJECT-TYPE SYNTAX INTEGER { none(1), import(2), originate(3), redistribute(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of default route action." ::= { bgpCurCfgPeerEntry 11 } bgpCurCfgPeerOspfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable advertising OSPF routes." ::= { bgpCurCfgPeerEntry 12 } bgpCurCfgPeerFixedState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable advertising fixed routes." ::= { bgpCurCfgPeerEntry 13 } bgpCurCfgPeerStaticState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable advertising static routes." ::= { bgpCurCfgPeerEntry 14 } bgpCurCfgPeerVipState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable VIP static routes." ::= { bgpCurCfgPeerEntry 15 } bgpCurCfgPeerInRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { bgpCurCfgPeerEntry 16 } bgpCurCfgPeerOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { bgpCurCfgPeerEntry 17 } bgpCurCfgPeerHoldTime OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Hold Time value of the BGP peer IP datagram. " ::= { bgpCurCfgPeerEntry 18 } bgpCurCfgPeerKeepAlive OBJECT-TYPE SYNTAX INTEGER (1..21845) MAX-ACCESS read-only STATUS current DESCRIPTION "The KeepAlive Time value of the BGP peer IP datagram. " ::= { bgpCurCfgPeerEntry 19 } bgpCurCfgPeerMinTime OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The min time between advertisements of the BGP peer IP datagram. " ::= { bgpCurCfgPeerEntry 20 } bgpCurCfgPeerConRetry OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Connect Retry Timer Interval value of the BGP peer IP datagram. " ::= { bgpCurCfgPeerEntry 21 } bgpCurCfgPeerMinAS OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum time between route originations of the BGP peer IP datagram." ::= { bgpCurCfgPeerEntry 22 } bgpCurCfgPeerRipState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable RIP static routes." ::= { bgpCurCfgPeerEntry 23 } bgpCurCfgPeerDenyState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable DENY route advertisement." ::= { bgpCurCfgPeerEntry 24 } bgpCurCfgPeerNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value will be used by BGP peer as nexthop. " ::= { bgpCurCfgPeerEntry 25 } bgpCurCfgPeerBfdState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Turn BFD on/off for the peer." ::= { bgpCurCfgPeerEntry 26 } bgpNewCfgPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpNewCfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of BGP peer configuration in the current_config." ::= { bgpCfg 4 } bgpNewCfgPeerEntry OBJECT-TYPE SYNTAX BgpNewCfgPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a BGP peer." INDEX { bgpNewCfgPeerIndex } ::= { bgpNewCfgPeerTable 1 } BgpNewCfgPeerEntry ::= SEQUENCE { bgpNewCfgPeerIndex Integer32, bgpNewCfgPeerRemoteAddr IpAddress, bgpNewCfgPeerRemoteAs Unsigned32, bgpNewCfgPeerTtl INTEGER, bgpNewCfgPeerState INTEGER, bgpNewCfgPeerDelete INTEGER, bgpNewCfgPeerMetric Unsigned32, bgpNewCfgPeerDefaultAction INTEGER, bgpNewCfgPeerOspfState INTEGER, bgpNewCfgPeerFixedState INTEGER, bgpNewCfgPeerStaticState INTEGER, bgpNewCfgPeerVipState INTEGER, bgpNewCfgPeerInRmapList OCTET STRING, bgpNewCfgPeerOutRmapList OCTET STRING, bgpNewCfgPeerAddInRmap Integer32, bgpNewCfgPeerAddOutRmap Integer32, bgpNewCfgPeerRemoveInRmap Integer32, bgpNewCfgPeerRemoveOutRmap Integer32, bgpNewCfgPeerHoldTime INTEGER, bgpNewCfgPeerKeepAlive INTEGER, bgpNewCfgPeerMinTime INTEGER, bgpNewCfgPeerConRetry INTEGER, bgpNewCfgPeerMinAS INTEGER, bgpNewCfgPeerRipState INTEGER, bgpNewCfgPeerDenyState INTEGER, bgpNewCfgPeerNextHop IpAddress, bgpNewCfgPeerBfdState INTEGER } bgpNewCfgPeerIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The BGP peer number for which the BGP peer table is related." ::= { bgpNewCfgPeerEntry 1} bgpNewCfgPeerRemoteAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The remote IP address of the BGP peer." ::= { bgpNewCfgPeerEntry 2 } bgpNewCfgPeerRemoteAs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The remote AS number of the BGP peer. 0 means none" ::= { bgpNewCfgPeerEntry 3 } bgpNewCfgPeerTtl OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time-to-live value of the BGP peer IP datagram. " ::= { bgpNewCfgPeerEntry 4 } bgpNewCfgPeerState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the peer." ::= { bgpNewCfgPeerEntry 5 } bgpNewCfgPeerDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { bgpNewCfgPeerEntry 6 } bgpNewCfgPeerMetric OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-create STATUS current DESCRIPTION "The metric value of the BGP peer. A value of '0' means none" ::= { bgpNewCfgPeerEntry 10 } bgpNewCfgPeerDefaultAction OBJECT-TYPE SYNTAX INTEGER { none(1), import(2), originate(3), redistribute(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of default route action." ::= { bgpNewCfgPeerEntry 11 } bgpNewCfgPeerOspfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable advertising OSPF routes." ::= { bgpNewCfgPeerEntry 12 } bgpNewCfgPeerFixedState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable advertising fixed routes." ::= { bgpNewCfgPeerEntry 13 } bgpNewCfgPeerStaticState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable advertising static routes." ::= { bgpNewCfgPeerEntry 14 } bgpNewCfgPeerVipState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable VIP static routes." ::= { bgpNewCfgPeerEntry 15 } bgpNewCfgPeerInRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { bgpNewCfgPeerEntry 16 } bgpNewCfgPeerOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { bgpNewCfgPeerEntry 17 } bgpNewCfgPeerAddInRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The route map to be add into in-rmap list. When read, 0 is returned." ::= { bgpNewCfgPeerEntry 18 } bgpNewCfgPeerAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { bgpNewCfgPeerEntry 19 } bgpNewCfgPeerRemoveInRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { bgpNewCfgPeerEntry 20 } bgpNewCfgPeerRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { bgpNewCfgPeerEntry 21 } bgpNewCfgPeerHoldTime OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The Hold Time value of the BGP peer IP datagram. " ::= { bgpNewCfgPeerEntry 22 } bgpNewCfgPeerKeepAlive OBJECT-TYPE SYNTAX INTEGER (0..21845) MAX-ACCESS read-create STATUS current DESCRIPTION "The KeepAlive Time value of the BGP peer IP datagram. " ::= { bgpNewCfgPeerEntry 23 } bgpNewCfgPeerMinTime OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The mininum time between advertisements of the BGP peer IP datagram. " ::= { bgpNewCfgPeerEntry 24 } bgpNewCfgPeerConRetry OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The Connect Retry Timer Interval value of the BGP peer IP datagram. " ::= { bgpNewCfgPeerEntry 25 } bgpNewCfgPeerMinAS OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum time between route originations of the BGP peer IP datagram. " ::= { bgpNewCfgPeerEntry 26 } bgpNewCfgPeerRipState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable RIP static routes." ::= { bgpNewCfgPeerEntry 27 } bgpNewCfgPeerDenyState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable DENY route advertisement." ::= { bgpNewCfgPeerEntry 28 } bgpNewCfgPeerNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value will be used by BGP peer as nexthop. " ::= { bgpNewCfgPeerEntry 29 } bgpNewCfgPeerBfdState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Turn BFD on/off for the peer." ::= { bgpNewCfgPeerEntry 30 } -- -- BGP Aggregation Table -- bgpAggrTableMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the BGP aggregation table." ::= { bgpCfg 5 } bgpCurCfgAggrTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpCurCfgAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of BGP aggregation configuration." ::= { bgpCfg 6 } bgpCurCfgAggrEntry OBJECT-TYPE SYNTAX BgpCurCfgAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a BGP aggregation." INDEX { bgpCurCfgAggrIndex } ::= { bgpCurCfgAggrTable 1 } BgpCurCfgAggrEntry ::= SEQUENCE { bgpCurCfgAggrIndex Integer32, bgpCurCfgAggrAddr IpAddress, bgpCurCfgAggrMask IpAddress, bgpCurCfgAggrState INTEGER } bgpCurCfgAggrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aggregation number for which the BGP aggregation is related." ::= { bgpCurCfgAggrEntry 1} bgpCurCfgAggrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the BGP aggregation." ::= { bgpCurCfgAggrEntry 2 } bgpCurCfgAggrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the BGP aggregation." ::= { bgpCurCfgAggrEntry 3 } bgpCurCfgAggrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable the BGP aggregation." ::= { bgpCurCfgAggrEntry 4 } bgpNewCfgAggrTable OBJECT-TYPE SYNTAX SEQUENCE OF BgpNewCfgAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of BGP aggregation configuration." ::= { bgpCfg 7 } bgpNewCfgAggrEntry OBJECT-TYPE SYNTAX BgpNewCfgAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an BGP aggregation." INDEX { bgpNewCfgAggrIndex } ::= { bgpNewCfgAggrTable 1 } BgpNewCfgAggrEntry ::= SEQUENCE { bgpNewCfgAggrIndex Integer32, bgpNewCfgAggrAddr IpAddress, bgpNewCfgAggrMask IpAddress, bgpNewCfgAggrState INTEGER, bgpNewCfgAggrDelete INTEGER } bgpNewCfgAggrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aggregation number for which the BGP aggregation is related." ::= { bgpNewCfgAggrEntry 1} bgpNewCfgAggrAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the BGP aggregation." ::= { bgpNewCfgAggrEntry 2 } bgpNewCfgAggrMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask of the BGP aggregation." ::= { bgpNewCfgAggrEntry 3 } bgpNewCfgAggrState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the BGP aggregation." ::= { bgpNewCfgAggrEntry 4 } bgpNewCfgAggrDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { bgpNewCfgAggrEntry 5 } -- -- IP OSPF configuration -- ospfGeneral OBJECT IDENTIFIER ::= { ospfCfg 1 } ospfCurCfgDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the metric to be assigned." ::= { ospfGeneral 1 } ospfNewCfgDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the metric to be assigned." ::= { ospfGeneral 2 } ospfCurCfgDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the AS External metric type to be assigned." ::= { ospfGeneral 3 } ospfNewCfgDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the AS External metric type to be assigned." ::= { ospfGeneral 4 } ospfIntfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Interface table." ::= { ospfGeneral 5 } ospfAreaTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Area table." ::= { ospfGeneral 6 } ospfRangeTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Range table." ::= { ospfGeneral 7 } ospfVirtIntfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Virtual Interface table." ::= { ospfGeneral 8 } ospfHostTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Host table." ::= { ospfGeneral 9 } ospfCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF global state." ::= { ospfGeneral 10 } ospfNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn OSPF on or off." ::= { ospfGeneral 11 } ospfCurCfgLsdb OBJECT-TYPE SYNTAX INTEGER (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the LSDB limit for external LSA." ::= { ospfGeneral 12 } ospfNewCfgLsdb OBJECT-TYPE SYNTAX INTEGER (0..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the LSDB limit for external LSA." ::= { ospfGeneral 13 } ospfCurCfgAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area configuration in the current_config." ::= { ospfCfg 2 } ospfCurCfgAreaEntry OBJECT-TYPE SYNTAX OspfCurCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfCurCfgAreaIndex, ospfCurCfgAreaId } ::= { ospfCurCfgAreaTable 1 } OspfCurCfgAreaEntry ::= SEQUENCE { ospfCurCfgAreaIndex Integer32, ospfCurCfgAreaId IpAddress, ospfCurCfgAreaSpfInterval INTEGER, ospfCurCfgAreaAuthType INTEGER, ospfCurCfgAreaType INTEGER, ospfCurCfgAreaMetric INTEGER, ospfCurCfgAreaState INTEGER } ospfCurCfgAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF area table is related." ::= { ospfCurCfgAreaEntry 1} ospfCurCfgAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF area." ::= { ospfCurCfgAreaEntry 2 } ospfCurCfgAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The SPF interval for the OSPF area." ::= { ospfCurCfgAreaEntry 3 } ospfCurCfgAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication." ::= { ospfCurCfgAreaEntry 4 } ospfCurCfgAreaType OBJECT-TYPE SYNTAX INTEGER { transit(1), stub(2), nssa(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of area being used." ::= { ospfCurCfgAreaEntry 5 } ospfCurCfgAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Stub area metric for the OSPF area." ::= { ospfCurCfgAreaEntry 6 } ospfCurCfgAreaState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Globally turn OSPF on or off." ::= { ospfCurCfgAreaEntry 7 } ospfNewCfgAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area configuration in the new_config." ::= { ospfCfg 3 } ospfNewCfgAreaEntry OBJECT-TYPE SYNTAX OspfNewCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfNewCfgAreaIndex, ospfNewCfgAreaId } ::= { ospfNewCfgAreaTable 1 } OspfNewCfgAreaEntry ::= SEQUENCE { ospfNewCfgAreaIndex Integer32, ospfNewCfgAreaId IpAddress, ospfNewCfgAreaSpfInterval INTEGER, ospfNewCfgAreaAuthType INTEGER, ospfNewCfgAreaType INTEGER, ospfNewCfgAreaMetric INTEGER, ospfNewCfgAreaState INTEGER, ospfNewCfgAreaDelete INTEGER } ospfNewCfgAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF area table is related." ::= { ospfNewCfgAreaEntry 1} ospfNewCfgAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF area." ::= { ospfNewCfgAreaEntry 2 } ospfNewCfgAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The SPF interval for the OSPF area." ::= { ospfNewCfgAreaEntry 3 } ospfNewCfgAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication." ::= { ospfNewCfgAreaEntry 4 } ospfNewCfgAreaType OBJECT-TYPE SYNTAX INTEGER { transit(1), stub(2), nssa(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of area being used." ::= { ospfNewCfgAreaEntry 5 } ospfNewCfgAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The Stub area metric for the OSPF area." ::= { ospfNewCfgAreaEntry 6 } ospfNewCfgAreaState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPF Area." ::= { ospfNewCfgAreaEntry 7 } ospfNewCfgAreaDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgAreaEntry 8 } ospfNewCfgVisionAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgVisionAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area configuration in the new_config." ::= { ospfCfg 16 } ospfNewCfgVisionAreaEntry OBJECT-TYPE SYNTAX OspfNewCfgVisionAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfNewCfgVisionAreaIndex } ::= { ospfNewCfgVisionAreaTable 1 } OspfNewCfgVisionAreaEntry ::= SEQUENCE { ospfNewCfgVisionAreaIndex Integer32, ospfNewCfgVisionAreaId IpAddress, ospfNewCfgVisionAreaSpfInterval INTEGER, ospfNewCfgVisionAreaAuthType INTEGER, ospfNewCfgVisionAreaType INTEGER, ospfNewCfgVisionAreaMetric INTEGER, ospfNewCfgVisionAreaState INTEGER, ospfNewCfgVisionAreaDelete INTEGER } ospfNewCfgVisionAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF area table is related." ::= { ospfNewCfgVisionAreaEntry 1} ospfNewCfgVisionAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of the OSPF area." ::= { ospfNewCfgVisionAreaEntry 2 } ospfNewCfgVisionAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The SPF interval for the OSPF area." ::= { ospfNewCfgVisionAreaEntry 3 } ospfNewCfgVisionAreaAuthType OBJECT-TYPE SYNTAX INTEGER { none(1), password(2), md5(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication." ::= { ospfNewCfgVisionAreaEntry 4 } ospfNewCfgVisionAreaType OBJECT-TYPE SYNTAX INTEGER { transit(1), stub(2), nssa(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of area being used." ::= { ospfNewCfgVisionAreaEntry 5 } ospfNewCfgVisionAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The Stub area metric for the OSPF area." ::= { ospfNewCfgVisionAreaEntry 6 } ospfNewCfgVisionAreaState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPF Area." ::= { ospfNewCfgVisionAreaEntry 7 } ospfNewCfgVisionAreaDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgVisionAreaEntry 8 } -- OSPF Host Table ospfCurCfgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Host configuration." ::= { ospfCfg 12 } ospfCurCfgHostEntry OBJECT-TYPE SYNTAX OspfCurCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF host." INDEX { ospfCurCfgHostIndex } ::= { ospfCurCfgHostTable 1 } OspfCurCfgHostEntry ::= SEQUENCE { ospfCurCfgHostIndex Integer32, ospfCurCfgHostIpAddr IpAddress, ospfCurCfgHostAreaIndex Integer32, ospfCurCfgHostCost INTEGER, ospfCurCfgHostState INTEGER } ospfCurCfgHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF host number for which the OSPF host table is related." ::= { ospfCurCfgHostEntry 1} ospfCurCfgHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF host." ::= { ospfCurCfgHostEntry 2 } ospfCurCfgHostAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ospfCurCfgHostEntry 3 } ospfCurCfgHostCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Cost of the host entry." ::= { ospfCurCfgHostEntry 4 } ospfCurCfgHostState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable Host Entry." ::= { ospfCurCfgHostEntry 5 } ospfNewCfgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Host configuration." ::= { ospfCfg 13 } ospfNewCfgHostEntry OBJECT-TYPE SYNTAX OspfNewCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF host." INDEX { ospfNewCfgHostIndex } ::= { ospfNewCfgHostTable 1 } OspfNewCfgHostEntry ::= SEQUENCE { ospfNewCfgHostIndex Integer32, ospfNewCfgHostIpAddr IpAddress, ospfNewCfgHostAreaIndex Integer32, ospfNewCfgHostCost INTEGER, ospfNewCfgHostState INTEGER, ospfNewCfgHostDelete INTEGER } ospfNewCfgHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF host number for which the OSPF host table is related." ::= { ospfNewCfgHostEntry 1} ospfNewCfgHostIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPF host." ::= { ospfNewCfgHostEntry 2 } ospfNewCfgHostAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF area index." ::= { ospfNewCfgHostEntry 3 } ospfNewCfgHostCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Cost of the host entry." ::= { ospfNewCfgHostEntry 4 } ospfNewCfgHostState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable Host Entry." ::= { ospfNewCfgHostEntry 5 } ospfNewCfgHostDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgHostEntry 6 } ospfMdkeyTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Mdkey table." ::= { ospfCfg 11 } ospfCurCfgMdkeyTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF MD5 keys in the current_config." ::= { ospfCfg 5 } ospfCurCfgMdkeyEntry OBJECT-TYPE SYNTAX OspfCurCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF MD keys table." INDEX { ospfCurCfgMdkeyIndex } ::= { ospfCurCfgMdkeyTable 1 } OspfCurCfgMdkeyEntry ::= SEQUENCE { ospfCurCfgMdkeyIndex Integer32, ospfCurCfgMdkeyKey DisplayString } ospfCurCfgMdkeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF MD5 Key number for which the OSPF MdKey table is related." ::= { ospfCurCfgMdkeyEntry 1} ospfCurCfgMdkeyKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The character string representing the MD5 Key." ::= { ospfCurCfgMdkeyEntry 2 } ospfNewCfgMdkeyTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF MD5 keys in the new_config." ::= { ospfCfg 6 } ospfNewCfgMdkeyEntry OBJECT-TYPE SYNTAX OspfNewCfgMdkeyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF MD keys table." INDEX { ospfNewCfgMdkeyIndex } ::= { ospfNewCfgMdkeyTable 1 } OspfNewCfgMdkeyEntry ::= SEQUENCE { ospfNewCfgMdkeyIndex Integer32, ospfNewCfgMdkeyKey DisplayString, ospfNewCfgMdkeyDelete INTEGER } ospfNewCfgMdkeyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF MD5 Key number for which the OSPF MdKey table is related." ::= { ospfNewCfgMdkeyEntry 1} ospfNewCfgMdkeyKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The character string representing the MD5 Key." ::= { ospfNewCfgMdkeyEntry 2 } ospfNewCfgMdkeyDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgMdkeyEntry 3} ospfCurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface configuration in the current_config." ::= { ospfCfg 7 } ospfCurCfgIntfEntry OBJECT-TYPE SYNTAX OspfCurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF Interface." INDEX { ospfCurCfgIntfIndex } ::= { ospfCurCfgIntfTable 1 } OspfCurCfgIntfEntry ::= SEQUENCE { ospfCurCfgIntfIndex Integer32, ospfCurCfgIntfId IpAddress, ospfCurCfgIntfMdkey INTEGER, ospfCurCfgIntfAreaId INTEGER, ospfCurCfgIntfPriority INTEGER, ospfCurCfgIntfCost INTEGER, ospfCurCfgIntfHello INTEGER, ospfCurCfgIntfDead INTEGER, ospfCurCfgIntfTransit INTEGER, ospfCurCfgIntfRetrans INTEGER, ospfCurCfgIntfKey DisplayString, ospfCurCfgIntfState INTEGER, ospfCurCfgIntfBfd INTEGER } ospfCurCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which the OSPF Interface table is related." ::= { ospfCurCfgIntfEntry 1} ospfCurCfgIntfId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF interface." ::= { ospfCurCfgIntfEntry 2 } ospfCurCfgIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key for the OSPF interface 0 (none) no MD5 authentication." ::= { ospfCurCfgIntfEntry 3 } ospfCurCfgIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify Area Index." ::= { ospfCurCfgIntfEntry 4 } ospfCurCfgIntfPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify interface router priority." ::= { ospfCurCfgIntfEntry 5 } ospfCurCfgIntfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Cost." ::= { ospfCurCfgIntfEntry 6 } ospfCurCfgIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfCurCfgIntfEntry 7 } ospfCurCfgIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfCurCfgIntfEntry 8 } ospfCurCfgIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfCurCfgIntfEntry 9 } ospfCurCfgIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfCurCfgIntfEntry 10 } ospfCurCfgIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify Authentication Key." ::= { ospfCurCfgIntfEntry 11 } ospfCurCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable OSPF Interface." ::= { ospfCurCfgIntfEntry 12 } ospfCurCfgIntfBfd OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Turn BFD on/off for the OSPF interface." ::= { ospfCurCfgIntfEntry 13 } ospfNewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface configuration in the new_config." ::= { ospfCfg 8 } ospfNewCfgIntfEntry OBJECT-TYPE SYNTAX OspfNewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF Interface." INDEX { ospfNewCfgIntfIndex } ::= { ospfNewCfgIntfTable 1 } OspfNewCfgIntfEntry ::= SEQUENCE { ospfNewCfgIntfIndex Integer32, ospfNewCfgIntfId IpAddress, ospfNewCfgIntfMdkey INTEGER, ospfNewCfgIntfAreaId INTEGER, ospfNewCfgIntfPriority INTEGER, ospfNewCfgIntfCost INTEGER, ospfNewCfgIntfHello INTEGER, ospfNewCfgIntfDead INTEGER, ospfNewCfgIntfTransit INTEGER, ospfNewCfgIntfRetrans INTEGER, ospfNewCfgIntfKey DisplayString, ospfNewCfgIntfState INTEGER, ospfNewCfgIntfDelete INTEGER, ospfNewCfgIntfBfd INTEGER } ospfNewCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which the OSPF Interface table is related." ::= { ospfNewCfgIntfEntry 1} ospfNewCfgIntfId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF interface." ::= { ospfNewCfgIntfEntry 2 } ospfNewCfgIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The MD5 key for the OSPF interface 0 (none) no MD5 authentication." ::= { ospfNewCfgIntfEntry 3 } ospfNewCfgIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify Area Index." ::= { ospfNewCfgIntfEntry 4 } ospfNewCfgIntfPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify interface router priority." ::= { ospfNewCfgIntfEntry 5 } ospfNewCfgIntfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify interface cost." ::= { ospfNewCfgIntfEntry 6 } ospfNewCfgIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfNewCfgIntfEntry 7 } ospfNewCfgIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfNewCfgIntfEntry 8 } ospfNewCfgIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfNewCfgIntfEntry 9 } ospfNewCfgIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfNewCfgIntfEntry 10 } ospfNewCfgIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify Authentication Key." ::= { ospfNewCfgIntfEntry 11 } ospfNewCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPF Interface." ::= { ospfNewCfgIntfEntry 12 } ospfNewCfgIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgIntfEntry 13 } ospfNewCfgIntfBfd OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Turn BFD on/off for the OSPF interface." ::= { ospfNewCfgIntfEntry 14 } ospfCurCfgVirtIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Virtual Interface configuration in the current configuration." ::= { ospfCfg 9 } ospfCurCfgVirtIntfEntry OBJECT-TYPE SYNTAX OspfCurCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF virtual Interface." INDEX { ospfCurCfgVirtIntfIndex } ::= { ospfCurCfgVirtIntfTable 1 } OspfCurCfgVirtIntfEntry ::= SEQUENCE { ospfCurCfgVirtIntfIndex Integer32, ospfCurCfgVirtIntfAreaId INTEGER, ospfCurCfgVirtIntfNbr IpAddress, ospfCurCfgVirtIntfMdkey INTEGER, ospfCurCfgVirtIntfHello INTEGER, ospfCurCfgVirtIntfDead INTEGER, ospfCurCfgVirtIntfTransit INTEGER, ospfCurCfgVirtIntfRetrans INTEGER, ospfCurCfgVirtIntfKey DisplayString, ospfCurCfgVirtIntfState INTEGER } ospfCurCfgVirtIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related." ::= { ospfCurCfgVirtIntfEntry 1} ospfCurCfgVirtIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Area Id." ::= { ospfCurCfgVirtIntfEntry 2 } ospfCurCfgVirtIntfNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF neighbour for this virtual interface." ::= { ospfCurCfgVirtIntfEntry 3 } ospfCurCfgVirtIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication." ::= { ospfCurCfgVirtIntfEntry 4 } ospfCurCfgVirtIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfCurCfgVirtIntfEntry 5 } ospfCurCfgVirtIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfCurCfgVirtIntfEntry 6 } ospfCurCfgVirtIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfCurCfgVirtIntfEntry 7 } ospfCurCfgVirtIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfCurCfgVirtIntfEntry 8 } ospfCurCfgVirtIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify Authentication Key." ::= { ospfCurCfgVirtIntfEntry 9 } ospfCurCfgVirtIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable OSPF Interface." ::= { ospfCurCfgVirtIntfEntry 10 } ospfNewCfgVirtIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Virtual Interface configuration in the new_config." ::= { ospfCfg 10 } ospfNewCfgVirtIntfEntry OBJECT-TYPE SYNTAX OspfNewCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF virtual Interface." INDEX { ospfNewCfgVirtIntfIndex } ::= { ospfNewCfgVirtIntfTable 1 } OspfNewCfgVirtIntfEntry ::= SEQUENCE { ospfNewCfgVirtIntfIndex Integer32, ospfNewCfgVirtIntfAreaId INTEGER, ospfNewCfgVirtIntfNbr IpAddress, ospfNewCfgVirtIntfMdkey INTEGER, ospfNewCfgVirtIntfHello INTEGER, ospfNewCfgVirtIntfDead INTEGER, ospfNewCfgVirtIntfTransit INTEGER, ospfNewCfgVirtIntfRetrans INTEGER, ospfNewCfgVirtIntfKey DisplayString, ospfNewCfgVirtIntfState INTEGER, ospfNewCfgVirtIntfDelete INTEGER } ospfNewCfgVirtIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related." ::= { ospfNewCfgVirtIntfEntry 1} ospfNewCfgVirtIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF Area Id." ::= { ospfNewCfgVirtIntfEntry 2 } ospfNewCfgVirtIntfNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPF neighbour for this virtual interface." ::= { ospfNewCfgVirtIntfEntry 3 } ospfNewCfgVirtIntfMdkey OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication." ::= { ospfNewCfgVirtIntfEntry 4 } ospfNewCfgVirtIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfNewCfgVirtIntfEntry 5 } ospfNewCfgVirtIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfNewCfgVirtIntfEntry 6 } ospfNewCfgVirtIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfNewCfgVirtIntfEntry 7 } ospfNewCfgVirtIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfNewCfgVirtIntfEntry 8 } ospfNewCfgVirtIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify Authentication Key. Enter string of 8 characters or None." ::= { ospfNewCfgVirtIntfEntry 9 } ospfNewCfgVirtIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPF Interface." ::= { ospfNewCfgVirtIntfEntry 10 } ospfNewCfgVirtIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgVirtIntfEntry 11 } -- ospf range ospfCurCfgRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfCurCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF summary range in the current configuration." ::= { ospfCfg 14 } ospfCurCfgRangeEntry OBJECT-TYPE SYNTAX OspfCurCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF summary range." INDEX { ospfCurCfgRangeIndex } ::= { ospfCurCfgRangeTable 1 } OspfCurCfgRangeEntry ::= SEQUENCE { ospfCurCfgRangeIndex Integer32, ospfCurCfgRangeAddr IpAddress, ospfCurCfgRangeMask IpAddress, ospfCurCfgRangeAreaIndex Integer32, ospfCurCfgRangeHideState INTEGER, ospfCurCfgRangeState INTEGER } ospfCurCfgRangeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPF summary range table is related." ::= { ospfCurCfgRangeEntry 1} ospfCurCfgRangeAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the range." ::= { ospfCurCfgRangeEntry 2 } ospfCurCfgRangeMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of the range." ::= { ospfCurCfgRangeEntry 3 } ospfCurCfgRangeAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ospfCurCfgRangeEntry 4 } ospfCurCfgRangeHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the hide range." ::= { ospfCurCfgRangeEntry 5 } ospfCurCfgRangeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the range." ::= { ospfCurCfgRangeEntry 6 } ospfNewCfgRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfNewCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF summary range in the new configuration." ::= { ospfCfg 15 } ospfNewCfgRangeEntry OBJECT-TYPE SYNTAX OspfNewCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPF summary range." INDEX { ospfNewCfgRangeIndex } ::= { ospfNewCfgRangeTable 1 } OspfNewCfgRangeEntry ::= SEQUENCE { ospfNewCfgRangeIndex Integer32, ospfNewCfgRangeAddr IpAddress, ospfNewCfgRangeMask IpAddress, ospfNewCfgRangeAreaIndex Integer32, ospfNewCfgRangeHideState INTEGER, ospfNewCfgRangeState INTEGER, ospfNewCfgRangeDelete INTEGER } ospfNewCfgRangeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPF summary range table is related." ::= { ospfNewCfgRangeEntry 1} ospfNewCfgRangeAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the range." ::= { ospfNewCfgRangeEntry 2 } ospfNewCfgRangeMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The mask of the range." ::= { ospfNewCfgRangeEntry 3 } ospfNewCfgRangeAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The area index." ::= { ospfNewCfgRangeEntry 4 } ospfNewCfgRangeHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the hide range." ::= { ospfNewCfgRangeEntry 5 } ospfNewCfgRangeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the range." ::= { ospfNewCfgRangeEntry 6 } ospfNewCfgRangeDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfNewCfgRangeEntry 7 } ospfRouteRedistribution OBJECT IDENTIFIER ::= { ospfCfg 4 } ospfRedistributeStatic OBJECT IDENTIFIER ::= { ospfRouteRedistribution 1 } ospfCurCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ospfRedistributeStatic 1 } ospfNewCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ospfRedistributeStatic 2 } ospfCurCfgStaticMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ospfRedistributeStatic 3 } ospfNewCfgStaticMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ospfRedistributeStatic 4 } ospfCurCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeStatic 5 } ospfNewCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeStatic 6 } ospfNewCfgStaticAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeStatic 7 } ospfNewCfgStaticRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeStatic 8 } ospfRedistributeEbgp OBJECT IDENTIFIER ::= { ospfRouteRedistribution 2 } ospfCurCfgEbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric to be assigned to External BGP routes. A value of 0 indicates none." ::= { ospfRedistributeEbgp 1 } ospfNewCfgEbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric to be assigned to External BGP routes. A value of 0 indicates none." ::= { ospfRedistributeEbgp 2 } ospfCurCfgEbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for External BGP routes." ::= { ospfRedistributeEbgp 3 } ospfNewCfgEbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for External BGP routes." ::= { ospfRedistributeEbgp 4 } ospfCurCfgEbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeEbgp 5 } ospfNewCfgEbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeEbgp 6 } ospfNewCfgEbgpAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be added into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeEbgp 7 } ospfNewCfgEbgpRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeEbgp 8 } ospfRedistributeIbgp OBJECT IDENTIFIER ::= { ospfRouteRedistribution 3 } ospfCurCfgIbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for Internal BGP routes. A value of 0 indicates none." ::= { ospfRedistributeIbgp 1 } ospfNewCfgIbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for Internal BGP routes. A value of 0 indicates none." ::= { ospfRedistributeIbgp 2 } ospfCurCfgIbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for Internal BGP routes." ::= { ospfRedistributeIbgp 3 } ospfNewCfgIbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for Internal BGP routes." ::= { ospfRedistributeIbgp 4 } ospfCurCfgIbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeIbgp 5 } ospfNewCfgIbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeIbgp 6 } ospfNewCfgIbgpAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeIbgp 7 } ospfNewCfgIbgpRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeIbgp 8 } ospfRedistributeFixed OBJECT IDENTIFIER ::= { ospfRouteRedistribution 4 } ospfCurCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ospfRedistributeFixed 1 } ospfNewCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ospfRedistributeFixed 2 } ospfCurCfgFixedMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ospfRedistributeFixed 3 } ospfNewCfgFixedMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ospfRedistributeFixed 4 } ospfCurCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeFixed 5 } ospfNewCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeFixed 6 } ospfNewCfgFixedAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeFixed 7 } ospfNewCfgFixedRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeFixed 8 } ospfRedistributeRip OBJECT IDENTIFIER ::= { ospfRouteRedistribution 5 } ospfCurCfgRipMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ospfRedistributeRip 1 } ospfNewCfgRipMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ospfRedistributeRip 2 } ospfCurCfgRipMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ospfRedistributeRip 3 } ospfNewCfgRipMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ospfRedistributeRip 4 } ospfCurCfgRipOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeRip 5 } ospfNewCfgRipOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfRedistributeRip 6 } ospfNewCfgRipAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfRedistributeRip 7 } ospfNewCfgRipRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfRedistributeRip 8 } -- -- IP OSPFv3 configuration -- ospfv3General OBJECT IDENTIFIER ::= { ospfv3Cfg 1 } ospfv3CurCfgDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the metric to be assigned." ::= { ospfv3General 1 } ospfv3NewCfgDefaultRouteMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the metric to be assigned." ::= { ospfv3General 2 } ospfv3CurCfgDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the AS External metric type to be assigned." ::= { ospfv3General 3 } ospfv3NewCfgDefaultRouteMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the AS External metric type to be assigned." ::= { ospfv3General 4 } ospfv3IntfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Interface table." ::= { ospfv3General 5 } ospfv3AreaTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Area table." ::= { ospfv3General 6 } ospfv3RangeTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Range table." ::= { ospfv3General 7 } ospfv3VirtIntfTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Virtual Interface table." ::= { ospfv3General 8 } ospfv3HostTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the OSPF Host table." ::= { ospfv3General 9 } ospfv3CurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF global state." ::= { ospfv3General 10 } ospfv3NewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn OSPF on or off." ::= { ospfv3General 11 } ospfv3CurCfgLsdb OBJECT-TYPE SYNTAX INTEGER (0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the LSDB limit for external LSA." ::= { ospfv3General 12 } ospfv3NewCfgLsdb OBJECT-TYPE SYNTAX INTEGER (0..2000) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the LSDB limit for external LSA." ::= { ospfv3General 13 } ospfv3CurCfgAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3CurCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Area configuration in the current_config." ::= { ospfv3Cfg 2 } ospfv3CurCfgAreaEntry OBJECT-TYPE SYNTAX Ospfv3CurCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 area." INDEX { ospfv3CurCfgAreaIndex, ospfv3CurCfgAreaId } ::= { ospfv3CurCfgAreaTable 1 } Ospfv3CurCfgAreaEntry ::= SEQUENCE { ospfv3CurCfgAreaIndex Integer32, ospfv3CurCfgAreaId IpAddress, ospfv3CurCfgAreaSpfInterval INTEGER, ospfv3CurCfgAreaType INTEGER, ospfv3CurCfgAreaMetric INTEGER, ospfv3CurCfgAreaMType INTEGER, ospfv3CurCfgAreaSummary INTEGER, ospfv3CurCfgAreaTrRole INTEGER, ospfv3CurCfgAreaState INTEGER, ospfv3CurCfgAreaIDRW IpAddress } ospfv3CurCfgAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 area number for which the OSPF area table is related." ::= { ospfv3CurCfgAreaEntry 1} ospfv3CurCfgAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPFv3 area." ::= { ospfv3CurCfgAreaEntry 2 } ospfv3CurCfgAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The SPF interval for the OSPFv3 area." ::= { ospfv3CurCfgAreaEntry 3 } ospfv3CurCfgAreaType OBJECT-TYPE SYNTAX INTEGER { transit(1), stub(2), nssa(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of area being used." ::= { ospfv3CurCfgAreaEntry 4 } ospfv3CurCfgAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The Stub area metric for the OSPFv3 area." ::= { ospfv3CurCfgAreaEntry 5 } ospfv3CurCfgAreaMType OBJECT-TYPE SYNTAX INTEGER { v3(1), compare-cost(2), non-compare(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Metric type" ::= { ospfv3CurCfgAreaEntry 6 } ospfv3CurCfgAreaSummary OBJECT-TYPE SYNTAX INTEGER { ena(1), dis(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Area summary import ena/dis" ::= { ospfv3CurCfgAreaEntry 7 } ospfv3CurCfgAreaTrRole OBJECT-TYPE SYNTAX INTEGER { always(1), candidate(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Translator role" ::= { ospfv3CurCfgAreaEntry 8 } ospfv3CurCfgAreaState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Globally turn OSPFv3 on or off." ::= { ospfv3CurCfgAreaEntry 9 } ospfv3CurCfgAreaIDRW OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPFv3 area." ::= { ospfv3CurCfgAreaEntry 10 } ospfv3NewCfgAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3NewCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Area configuration in the new_config." ::= { ospfv3Cfg 3 } ospfv3NewCfgAreaEntry OBJECT-TYPE SYNTAX Ospfv3NewCfgAreaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 area." INDEX { ospfv3NewCfgAreaIndex, ospfv3NewCfgAreaId } ::= { ospfv3NewCfgAreaTable 1 } Ospfv3NewCfgAreaEntry ::= SEQUENCE { ospfv3NewCfgAreaIndex Integer32, ospfv3NewCfgAreaId IpAddress, ospfv3NewCfgAreaSpfInterval INTEGER, ospfv3NewCfgAreaType INTEGER, ospfv3NewCfgAreaMetric INTEGER, ospfv3NewCfgAreaMType INTEGER, ospfv3NewCfgAreaSummary INTEGER, ospfv3NewCfgAreaTrRole INTEGER, ospfv3NewCfgAreaState INTEGER, ospfv3NewCfgAreaDelete INTEGER, ospfv3NewCfgAreaIDRW IpAddress } ospfv3NewCfgAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 area number for which the area table is related." ::= { ospfv3NewCfgAreaEntry 1} ospfv3NewCfgAreaId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The octal notation of the OSPFv3 area." ::= { ospfv3NewCfgAreaEntry 2 } ospfv3NewCfgAreaSpfInterval OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The SPF interval for the OSPFv3 area." ::= { ospfv3NewCfgAreaEntry 3 } ospfv3NewCfgAreaType OBJECT-TYPE SYNTAX INTEGER { transit(1), stub(2), nssa(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of area being used." ::= { ospfv3NewCfgAreaEntry 4 } ospfv3NewCfgAreaMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The Stub area metric for the OSPFv3 area." ::= { ospfv3NewCfgAreaEntry 5 } ospfv3NewCfgAreaMType OBJECT-TYPE SYNTAX INTEGER { v3(1), compare-cost(2), non-compare(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Metric type" ::= { ospfv3NewCfgAreaEntry 6} ospfv3NewCfgAreaSummary OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Ospfv3 summary import ena/dis" ::= { ospfv3NewCfgAreaEntry 7} ospfv3NewCfgAreaTrRole OBJECT-TYPE SYNTAX INTEGER { always(1), candidate(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Translator role" ::= { ospfv3NewCfgAreaEntry 8} ospfv3NewCfgAreaState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPFv3 Area." ::= { ospfv3NewCfgAreaEntry 9 } ospfv3NewCfgAreaDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfv3NewCfgAreaEntry 10 } ospfv3NewCfgAreaIDRW OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The octal notation of the OSPFv3 area." ::= { ospfv3NewCfgAreaEntry 11 } -- OSPFv3 Host Table ospfv3CurCfgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3CurCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Host configuration." ::= { ospfv3Cfg 12 } ospfv3CurCfgHostEntry OBJECT-TYPE SYNTAX Ospfv3CurCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 host." INDEX { ospfv3CurCfgHostIndex } ::= { ospfv3CurCfgHostTable 1 } Ospfv3CurCfgHostEntry ::= SEQUENCE { ospfv3CurCfgHostIndex Integer32, ospfv3CurCfgHostIp6Addr DisplayString, ospfv3CurCfgHostAreaIndex Integer32, ospfv3CurCfgHostCost INTEGER, ospfv3CurCfgHostState INTEGER } ospfv3CurCfgHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 host number for which the OSPF host table is related." ::= { ospfv3CurCfgHostEntry 1} ospfv3CurCfgHostIp6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPFv3 host." ::= { ospfv3CurCfgHostEntry 2 } ospfv3CurCfgHostAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ospfv3CurCfgHostEntry 3 } ospfv3CurCfgHostCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Cost of the host entry." ::= { ospfv3CurCfgHostEntry 4 } ospfv3CurCfgHostState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable Host Entry." ::= { ospfv3CurCfgHostEntry 5 } ospfv3NewCfgHostTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3NewCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Host configuration." ::= { ospfv3Cfg 13 } ospfv3NewCfgHostEntry OBJECT-TYPE SYNTAX Ospfv3NewCfgHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 host." INDEX { ospfv3NewCfgHostIndex } ::= { ospfv3NewCfgHostTable 1 } Ospfv3NewCfgHostEntry ::= SEQUENCE { ospfv3NewCfgHostIndex Integer32, ospfv3NewCfgHostIp6Addr DisplayString, ospfv3NewCfgHostAreaIndex Integer32, ospfv3NewCfgHostCost INTEGER, ospfv3NewCfgHostState INTEGER, ospfv3NewCfgHostDelete INTEGER } ospfv3NewCfgHostIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 host number for which the OSPFv3 host table is related." ::= { ospfv3NewCfgHostEntry 1} ospfv3NewCfgHostIp6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPFv3 host." ::= { ospfv3NewCfgHostEntry 2 } ospfv3NewCfgHostAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPFv3 area index." ::= { ospfv3NewCfgHostEntry 3 } ospfv3NewCfgHostCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Cost of the host entry." ::= { ospfv3NewCfgHostEntry 4 } ospfv3NewCfgHostState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable Host Entry." ::= { ospfv3NewCfgHostEntry 5 } ospfv3NewCfgHostDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfv3NewCfgHostEntry 6 } ospfv3CurCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3CurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Interface configuration in the current_config." ::= { ospfv3Cfg 7 } ospfv3CurCfgIntfEntry OBJECT-TYPE SYNTAX Ospfv3CurCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPFv3 Interface." INDEX { ospfv3CurCfgIntfIndex } ::= { ospfv3CurCfgIntfTable 1 } Ospfv3CurCfgIntfEntry ::= SEQUENCE { ospfv3CurCfgIntfIndex Integer32, ospfv3CurCfgIntfId IpAddress, ospfv3CurCfgIntfAreaId INTEGER, ospfv3CurCfgIntfPriority INTEGER, ospfv3CurCfgIntfCost INTEGER, ospfv3CurCfgIntfHello INTEGER, ospfv3CurCfgIntfDead INTEGER, ospfv3CurCfgIntfTransit INTEGER, ospfv3CurCfgIntfRetrans INTEGER, ospfv3CurCfgIntfState INTEGER } ospfv3CurCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Interface number for which the OSPFv3 Interface table is related." ::= { ospfv3CurCfgIntfEntry 1} ospfv3CurCfgIntfId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPFv3 interface." ::= { ospfv3CurCfgIntfEntry 2 } ospfv3CurCfgIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify Area Index." ::= { ospfv3CurCfgIntfEntry 3 } ospfv3CurCfgIntfPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Specify interface router priority." ::= { ospfv3CurCfgIntfEntry 4 } ospfv3CurCfgIntfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Cost." ::= { ospfv3CurCfgIntfEntry 5 } ospfv3CurCfgIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfv3CurCfgIntfEntry 6 } ospfv3CurCfgIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfv3CurCfgIntfEntry 7 } ospfv3CurCfgIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfv3CurCfgIntfEntry 8 } ospfv3CurCfgIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfv3CurCfgIntfEntry 9 } ospfv3CurCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPFv3 Interface Enabled/disabled ." ::= { ospfv3CurCfgIntfEntry 12 } ospfv3NewCfgIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3NewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Interface configuration in the new_config." ::= { ospfv3Cfg 8 } ospfv3NewCfgIntfEntry OBJECT-TYPE SYNTAX Ospfv3NewCfgIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPFv3 Interface." INDEX { ospfv3NewCfgIntfIndex } ::= { ospfv3NewCfgIntfTable 1 } Ospfv3NewCfgIntfEntry ::= SEQUENCE { ospfv3NewCfgIntfIndex Integer32, ospfv3NewCfgIntfId IpAddress, ospfv3NewCfgIntfAreaId INTEGER, ospfv3NewCfgIntfPriority INTEGER, ospfv3NewCfgIntfCost INTEGER, ospfv3NewCfgIntfHello INTEGER, ospfv3NewCfgIntfDead INTEGER, ospfv3NewCfgIntfTransit INTEGER, ospfv3NewCfgIntfRetrans INTEGER, ospfv3NewCfgIntfState INTEGER, ospfv3NewCfgIntfDelete INTEGER } ospfv3NewCfgIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Interface number for which the OSPFv3 Interface table is related." ::= { ospfv3NewCfgIntfEntry 1} ospfv3NewCfgIntfId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF interface." ::= { ospfv3NewCfgIntfEntry 2 } ospfv3NewCfgIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify Area Index." ::= { ospfv3NewCfgIntfEntry 3 } ospfv3NewCfgIntfPriority OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify interface router priority." ::= { ospfv3NewCfgIntfEntry 4 } ospfv3NewCfgIntfCost OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify interface cost." ::= { ospfv3NewCfgIntfEntry 5 } ospfv3NewCfgIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfv3NewCfgIntfEntry 6 } ospfv3NewCfgIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfv3NewCfgIntfEntry 7 } ospfv3NewCfgIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfv3NewCfgIntfEntry 8 } ospfv3NewCfgIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfv3NewCfgIntfEntry 9 } ospfv3NewCfgIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPFv3 Interface." ::= { ospfv3NewCfgIntfEntry 12 } ospfv3NewCfgIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfv3NewCfgIntfEntry 13 } ospfv3CurCfgVirtIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3CurCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Virtual Interface configuration in the current configuration." ::= { ospfv3Cfg 9 } ospfv3CurCfgVirtIntfEntry OBJECT-TYPE SYNTAX Ospfv3CurCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPFv3 virtual Interface." INDEX { ospfv3CurCfgVirtIntfIndex } ::= { ospfv3CurCfgVirtIntfTable 1 } Ospfv3CurCfgVirtIntfEntry ::= SEQUENCE { ospfv3CurCfgVirtIntfIndex Integer32, ospfv3CurCfgVirtIntfAreaId INTEGER, ospfv3CurCfgVirtIntfNbr IpAddress, ospfv3CurCfgVirtIntfHello INTEGER, ospfv3CurCfgVirtIntfDead INTEGER, ospfv3CurCfgVirtIntfTransit INTEGER, ospfv3CurCfgVirtIntfRetrans INTEGER, ospfv3CurCfgVirtIntfState INTEGER } ospfv3CurCfgVirtIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Virtual Interface number for which the OSPFv3 Virtual Interface table is related." ::= { ospfv3CurCfgVirtIntfEntry 1} ospfv3CurCfgVirtIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Area Id." ::= { ospfv3CurCfgVirtIntfEntry 2 } ospfv3CurCfgVirtIntfNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPFv3 neighbour for this virtual interface." ::= { ospfv3CurCfgVirtIntfEntry 3 } ospfv3CurCfgVirtIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfv3CurCfgVirtIntfEntry 4 } ospfv3CurCfgVirtIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfv3CurCfgVirtIntfEntry 5 } ospfv3CurCfgVirtIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfv3CurCfgVirtIntfEntry 6 } ospfv3CurCfgVirtIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-only STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfv3CurCfgVirtIntfEntry 7 } ospfv3CurCfgVirtIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPFv3 Interface Enabled/disabled ." ::= { ospfv3CurCfgVirtIntfEntry 8 } ospfv3NewCfgVirtIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3NewCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Virtual Interface configuration in the new_config." ::= { ospfv3Cfg 10 } ospfv3NewCfgVirtIntfEntry OBJECT-TYPE SYNTAX Ospfv3NewCfgVirtIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPFv3 virtual Interface." INDEX { ospfv3NewCfgVirtIntfIndex } ::= { ospfv3NewCfgVirtIntfTable 1 } Ospfv3NewCfgVirtIntfEntry ::= SEQUENCE { ospfv3NewCfgVirtIntfIndex Integer32, ospfv3NewCfgVirtIntfAreaId INTEGER, ospfv3NewCfgVirtIntfNbr IpAddress, ospfv3NewCfgVirtIntfHello INTEGER, ospfv3NewCfgVirtIntfDead INTEGER, ospfv3NewCfgVirtIntfTransit INTEGER, ospfv3NewCfgVirtIntfRetrans INTEGER, ospfv3NewCfgVirtIntfState INTEGER, ospfv3NewCfgVirtIntfDelete INTEGER } ospfv3NewCfgVirtIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Virtual Interface number for which the OSPF v3 Virtual Interface table is related." ::= { ospfv3NewCfgVirtIntfEntry 1} ospfv3NewCfgVirtIntfAreaId OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPFv3 Area Id." ::= { ospfv3NewCfgVirtIntfEntry 2 } ospfv3NewCfgVirtIntfNbr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the OSPFv3 neighbour for this virtual interface." ::= { ospfv3NewCfgVirtIntfEntry 3 } ospfv3NewCfgVirtIntfHello OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Hello interval in seconds." ::= { ospfv3NewCfgVirtIntfEntry 4 } ospfv3NewCfgVirtIntfDead OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Dead interval in seconds." ::= { ospfv3NewCfgVirtIntfEntry 5 } ospfv3NewCfgVirtIntfTransit OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Transit delay in seconds." ::= { ospfv3NewCfgVirtIntfEntry 6 } ospfv3NewCfgVirtIntfRetrans OBJECT-TYPE SYNTAX INTEGER (0..3600) MAX-ACCESS read-create STATUS current DESCRIPTION "Retransmit interval in seconds." ::= { ospfv3NewCfgVirtIntfEntry 7 } ospfv3NewCfgVirtIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable OSPFv3 Interface." ::= { ospfv3NewCfgVirtIntfEntry 8 } ospfv3NewCfgVirtIntfDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfv3NewCfgVirtIntfEntry 9 } -- ospfv3 range ospfv3CurCfgRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3CurCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 summary range in the current configuration." ::= { ospfv3Cfg 14 } ospfv3CurCfgRangeEntry OBJECT-TYPE SYNTAX Ospfv3CurCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPFv3 summary range." INDEX { ospfv3CurCfgRangeIndex } ::= { ospfv3CurCfgRangeTable 1 } Ospfv3CurCfgRangeEntry ::= SEQUENCE { ospfv3CurCfgRangeIndex Integer32, ospfv3CurCfgRangeAddr DisplayString, ospfv3CurCfgRangePrefix INTEGER, ospfv3CurCfgRangeAreaIndex Integer32, ospfv3CurCfgRangeHideState INTEGER, ospfv3CurCfgRangeState INTEGER } ospfv3CurCfgRangeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPFv3 summary range table is related." ::= { ospfv3CurCfgRangeEntry 1} ospfv3CurCfgRangeAddr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the range." ::= { ospfv3CurCfgRangeEntry 2 } ospfv3CurCfgRangePrefix OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of the range." ::= { ospfv3CurCfgRangeEntry 3 } ospfv3CurCfgRangeAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The area index." ::= { ospfv3CurCfgRangeEntry 4 } ospfv3CurCfgRangeHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the hide range." ::= { ospfv3CurCfgRangeEntry 5 } ospfv3CurCfgRangeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the range." ::= { ospfv3CurCfgRangeEntry 6 } ospfv3NewCfgRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3NewCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 summary range in the new configuration." ::= { ospfv3Cfg 15 } ospfv3NewCfgRangeEntry OBJECT-TYPE SYNTAX Ospfv3NewCfgRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about an OSPFv3 summary range." INDEX { ospfv3NewCfgRangeIndex } ::= { ospfv3NewCfgRangeTable 1 } Ospfv3NewCfgRangeEntry ::= SEQUENCE { ospfv3NewCfgRangeIndex Integer32, ospfv3NewCfgRangeAddr DisplayString, ospfv3NewCfgRangePrefix INTEGER, ospfv3NewCfgRangeAreaIndex Integer32, ospfv3NewCfgRangeHideState INTEGER, ospfv3NewCfgRangeState INTEGER, ospfv3NewCfgRangeDelete INTEGER } ospfv3NewCfgRangeIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The range number for which the OSPFv3 summary range table is related." ::= { ospfv3NewCfgRangeEntry 1} ospfv3NewCfgRangeAddr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The IP Address of the range." ::= { ospfv3NewCfgRangeEntry 2 } ospfv3NewCfgRangePrefix OBJECT-TYPE SYNTAX INTEGER (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The prefix length of the range." ::= { ospfv3NewCfgRangeEntry 3 } ospfv3NewCfgRangeAreaIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The area index." ::= { ospfv3NewCfgRangeEntry 4 } ospfv3NewCfgRangeHideState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the hide range." ::= { ospfv3NewCfgRangeEntry 5 } ospfv3NewCfgRangeState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The state of the range." ::= { ospfv3NewCfgRangeEntry 6 } ospfv3NewCfgRangeDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ospfv3NewCfgRangeEntry 7 } ospfv3RouteRedistribution OBJECT IDENTIFIER ::= { ospfv3Cfg 4 } ospfv3RedistributeStatic OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 1 } ospfv3CurCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ospfv3RedistributeStatic 1 } ospfv3NewCfgStaticMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The metric to be assigned to static routes. A value of 0 indicates none." ::= { ospfv3RedistributeStatic 2 } ospfv3CurCfgStaticMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ospfv3RedistributeStatic 3 } ospfv3NewCfgStaticMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for static routes." ::= { ospfv3RedistributeStatic 4 } ospfv3CurCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeStatic 5 } ospfv3NewCfgStaticOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeStatic 6 } ospfv3NewCfgStaticAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeStatic 7 } ospfv3NewCfgStaticRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeStatic 8 } ospfv3RedistributeEbgp OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 2 } ospfv3CurCfgEbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric to be assigned to External BGP routes. A value of 0 indicates none." ::= { ospfv3RedistributeEbgp 1 } ospfv3NewCfgEbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric to be assigned to External BGP routes. A value of 0 indicates none." ::= { ospfv3RedistributeEbgp 2 } ospfv3CurCfgEbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for External BGP routes." ::= { ospfv3RedistributeEbgp 3 } ospfv3NewCfgEbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for External BGP routes." ::= { ospfv3RedistributeEbgp 4 } ospfv3CurCfgEbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeEbgp 5 } ospfv3NewCfgEbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeEbgp 6 } ospfv3NewCfgEbgpAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be added into out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeEbgp 7 } ospfv3NewCfgEbgpRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeEbgp 8 } ospfv3RedistributeIbgp OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 3 } ospfv3CurCfgIbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for Internal BGP routes. A value of 0 indicates none." ::= { ospfv3RedistributeIbgp 1 } ospfv3NewCfgIbgpMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for Internal BGP routes. A value of 0 indicates none." ::= { ospfv3RedistributeIbgp 2 } ospfv3CurCfgIbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for Internal BGP routes." ::= { ospfv3RedistributeIbgp 3 } ospfv3NewCfgIbgpMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for Internal BGP routes." ::= { ospfv3RedistributeIbgp 4 } ospfv3CurCfgIbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeIbgp 5 } ospfv3NewCfgIbgpOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeIbgp 6 } ospfv3NewCfgIbgpAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeIbgp 7 } ospfv3NewCfgIbgpRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeIbgp 8 } ospfv3RedistributeFixed OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 4 } ospfv3CurCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ospfv3RedistributeFixed 1 } ospfv3NewCfgFixedMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for fixed routes. A value of 0 indicates none" ::= { ospfv3RedistributeFixed 2 } ospfv3CurCfgFixedMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ospfv3RedistributeFixed 3 } ospfv3NewCfgFixedMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for fixed routes." ::= { ospfv3RedistributeFixed 4 } ospfv3CurCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeFixed 5 } ospfv3NewCfgFixedOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeFixed 6 } ospfv3NewCfgFixedAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeFixed 7 } ospfv3NewCfgFixedRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeFixed 8 } ospfv3RedistributeRip OBJECT IDENTIFIER ::= { ospfv3RouteRedistribution 5 } ospfv3CurCfgRipMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ospfv3RedistributeRip 1 } ospfv3NewCfgRipMetric OBJECT-TYPE SYNTAX INTEGER (0..16777215) MAX-ACCESS read-write STATUS current DESCRIPTION "The export metric for RIP routes. A value of 0 indicates none" ::= { ospfv3RedistributeRip 2 } ospfv3CurCfgRipMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ospfv3RedistributeRip 3 } ospfv3NewCfgRipMetricType OBJECT-TYPE SYNTAX INTEGER { none(1), type1(2), type2(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The AS External metric type for RIP routes." ::= { ospfv3RedistributeRip 4 } ospfv3CurCfgRipOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeRip 5 } ospfv3NewCfgRipOutRmapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Rmap 9 || || || ||___ Rmap 8 || |____ Rmap 7 || . . . ||_________ Rmap 2 |__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected" ::= { ospfv3RedistributeRip 6 } ospfv3NewCfgRipAddOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be add into out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeRip 7 } ospfv3NewCfgRipRemoveOutRmap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The route map to be removed from out-rmap list. When read, 0 is returned." ::= { ospfv3RedistributeRip 8 } ipCurCfgRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The router ID of the switch." ::= { ipGeneralCfg 1 } ipNewCfgRouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The router ID of the switch." ::= { ipGeneralCfg 2 } ipCurCfgASNumber OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The autonomous system (AS) number." ::= { ipGeneralCfg 3 } ipNewCfgASNumber OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The autonomous system (AS) number." ::= { ipGeneralCfg 4 } ipCurCfgFragTblSize OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Fragmentation table size in 20k|40k|60k format." ::= { ipGeneralCfg 5 } ipNewCfgFragTblSize OBJECT-TYPE SYNTAX DisplayString (SIZE(0..4)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Fragmentation table size in 20k|40k|60k format." ::= { ipGeneralCfg 6 } -- -- IPMC Static Route Configuration -- -- Static ARP Configuration -- ipStaticArpTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the Static ARP table." ::= { ipStaticArpCfg 1 } ipCurCfgStaticArpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpCurCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static ARPs in the current configuration block." ::= { ipStaticArpCfg 2 } ipCurCfgStaticArpEntry OBJECT-TYPE SYNTAX IpCurCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static ARP table" INDEX { ipCurCfgStaticArpIndx } ::= { ipCurCfgStaticArpTable 1 } IpCurCfgStaticArpEntry ::= SEQUENCE { ipCurCfgStaticArpIndx Integer32, ipCurCfgStaticArpIp IpAddress, ipCurCfgStaticArpMAC PhysAddress, ipCurCfgStaticArpVlan Integer32, ipCurCfgStaticArpPort Integer32 } ipCurCfgStaticArpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static ARP table." ::= { ipCurCfgStaticArpEntry 1} ipCurCfgStaticArpIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the ARP entry." ::= { ipCurCfgStaticArpEntry 2} ipCurCfgStaticArpMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for the ARP entry." ::= { ipCurCfgStaticArpEntry 3 } ipCurCfgStaticArpVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN for the ARP entry." ::= { ipCurCfgStaticArpEntry 4} ipCurCfgStaticArpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port for the ARP entry." ::= { ipCurCfgStaticArpEntry 5} ipNewCfgStaticArpTable OBJECT-TYPE SYNTAX SEQUENCE OF IpNewCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static ARPs in the new configuration block." ::= { ipStaticArpCfg 3 } ipNewCfgStaticArpEntry OBJECT-TYPE SYNTAX IpNewCfgStaticArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static ARP table" INDEX { ipNewCfgStaticArpIndx } ::= { ipNewCfgStaticArpTable 1 } IpNewCfgStaticArpEntry ::= SEQUENCE { ipNewCfgStaticArpIndx Integer32, ipNewCfgStaticArpIp IpAddress, ipNewCfgStaticArpMAC PhysAddress, ipNewCfgStaticArpVlan Integer32, ipNewCfgStaticArpPort Integer32, ipNewCfgStaticArpAction INTEGER } ipNewCfgStaticArpIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the static ARP table." ::= { ipNewCfgStaticArpEntry 1} ipNewCfgStaticArpIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address for the ARP entry." ::= { ipNewCfgStaticArpEntry 2} ipNewCfgStaticArpMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address for the ARP entry." ::= { ipNewCfgStaticArpEntry 3 } ipNewCfgStaticArpVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN for the ARP entry." ::= { ipNewCfgStaticArpEntry 4} ipNewCfgStaticArpPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The port for the ARP entry." ::= { ipNewCfgStaticArpEntry 5} ipNewCfgStaticArpAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipNewCfgStaticArpEntry 6 } ipStaticArpTableNextAvailableIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The next available index in the Static ARP table." ::= { ipStaticArpCfg 4 } -- -- IPv6 Static Neighbor Configuration -- -- ipv6StaticNbrCfg OBJECT IDENTIFIER ::= { layer3Configs 22 } ipv6StaticNbrTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of rows in the IPv6 Static Neighbor table." ::= { ipv6StaticNbrCfg 1 } ipv6CurCfgStaticNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6CurCfgStaticNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static IPv6 Neighbors in the current configuration block." ::= { ipv6StaticNbrCfg 2 } ipv6CurCfgStaticNbrEntry OBJECT-TYPE SYNTAX Ipv6CurCfgStaticNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IPv6 NBR table" INDEX { ipv6CurCfgStaticNbrIndx } ::= { ipv6CurCfgStaticNbrTable 1 } Ipv6CurCfgStaticNbrEntry ::= SEQUENCE { ipv6CurCfgStaticNbrIndx Integer32, ipv6CurCfgStaticNbrIpv6Addr DisplayString, ipv6CurCfgStaticNbrMAC PhysAddress, ipv6CurCfgStaticNbrVlan Integer32, ipv6CurCfgStaticNbrPort Integer32 } ipv6CurCfgStaticNbrIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of static IPv6 NBR table." ::= { ipv6CurCfgStaticNbrEntry 1} ipv6CurCfgStaticNbrIpv6Addr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address for the static IPv6 NBR entry." ::= { ipv6CurCfgStaticNbrEntry 2} ipv6CurCfgStaticNbrMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for the static IPv6 NBR entry." ::= { ipv6CurCfgStaticNbrEntry 3 } ipv6CurCfgStaticNbrVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN for the static IPv6 NBR entry." ::= { ipv6CurCfgStaticNbrEntry 4} ipv6CurCfgStaticNbrPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port for the static IPv6 NBR entry." ::= { ipv6CurCfgStaticNbrEntry 5} ipv6NewCfgStaticNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF Ipv6NewCfgStaticNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of static IPv6 Neighbors in the New configuration block." ::= { ipv6StaticNbrCfg 3 } ipv6NewCfgStaticNbrEntry OBJECT-TYPE SYNTAX Ipv6NewCfgStaticNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the static IPv6 NBR table" INDEX { ipv6NewCfgStaticNbrIndx } ::= { ipv6NewCfgStaticNbrTable 1 } Ipv6NewCfgStaticNbrEntry ::= SEQUENCE { ipv6NewCfgStaticNbrIndx Integer32, ipv6NewCfgStaticNbrIpv6Addr DisplayString, ipv6NewCfgStaticNbrMAC PhysAddress, ipv6NewCfgStaticNbrVlan Integer32, ipv6NewCfgStaticNbrPort Integer32, ipv6NewCfgStaticNbrAction INTEGER } ipv6NewCfgStaticNbrIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The index of static IPv6 NBR table." ::= { ipv6NewCfgStaticNbrEntry 1} ipv6NewCfgStaticNbrIpv6Addr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv6 address for the static IPv6 NBR entry." ::= { ipv6NewCfgStaticNbrEntry 2} ipv6NewCfgStaticNbrMAC OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address for the static IPv6 NBR entry." ::= { ipv6NewCfgStaticNbrEntry 3 } ipv6NewCfgStaticNbrVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN for the static IPv6 NBR entry." ::= { ipv6NewCfgStaticNbrEntry 4} ipv6NewCfgStaticNbrPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The port for the static IPv6 NBR entry." ::= { ipv6NewCfgStaticNbrEntry 5} ipv6NewCfgStaticNbrAction OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipv6NewCfgStaticNbrEntry 6 } ipv6StaticNbrTableNextAvailableIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The next available index in the static IPv6 NBR table." ::= { ipv6StaticNbrCfg 4 } -- IP tunnel ipTunnelCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpTunnelCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ip tunnels configuration in the Current Configuration Block." ::= { ipTunnelCfg 2 } ipTunnelCurCfgEntry OBJECT-TYPE SYNTAX IpTunnelCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IP tunnel table" INDEX { ipTunnelCurCfgId } ::= { ipTunnelCurCfgTable 1 } IpTunnelCurCfgEntry ::= SEQUENCE { ipTunnelCurCfgId DisplayString, ipTunnelCurCfgIndex Integer32, ipTunnelCurCfgState INTEGER, ipTunnelCurCfgLocalMode INTEGER, ipTunnelCurCfgLocalIfId Integer32, ipTunnelCurCfgLocalVrId Integer32, ipTunnelCurCfgLocalHaName DisplayString, ipTunnelCurCfgIpVer INTEGER, ipTunnelCurCfgIpVerMatch INTEGER, ipTunnelCurCfgRemoteAddr4 IpAddress, ipTunnelCurCfgRemoteAddr6 DisplayString, ipTunnelCurCfgMatch IpAddress, ipTunnelCurCfgMatch6 DisplayString, ipTunnelCurCfgType INTEGER, ipTunnelCurCfgDescription DisplayString, ipTunnelCurCfgGreKey DisplayString, ipTunnelCurCfgInnerLocalIfId Integer32 } ipTunnelCurCfgId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP tunnel number for which the information is related." ::= { ipTunnelCurCfgEntry 1 } ipTunnelCurCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local index" ::= { ipTunnelCurCfgEntry 2 } ipTunnelCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or Disable the IP tunnel interface." ::= { ipTunnelCurCfgEntry 3 } ipTunnelCurCfgLocalMode OBJECT-TYPE SYNTAX INTEGER{ disabled(1), if(2), floating(3), vr(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local address mode." ::= { ipTunnelCurCfgEntry 4 } ipTunnelCurCfgLocalIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local address." ::= { ipTunnelCurCfgEntry 5 } ipTunnelCurCfgLocalVrId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local address." ::= { ipTunnelCurCfgEntry 6 } ipTunnelCurCfgLocalHaName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local HA id." ::= { ipTunnelCurCfgEntry 7 } ipTunnelCurCfgIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address." ::= { ipTunnelCurCfgEntry 8 } ipTunnelCurCfgIpVerMatch OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address of the egress match criteria." ::= { ipTunnelCurCfgEntry 9 } ipTunnelCurCfgRemoteAddr4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The remote tunnel IP address." ::= { ipTunnelCurCfgEntry 10 } ipTunnelCurCfgRemoteAddr6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The remote tunnel IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipTunnelCurCfgEntry 11 } ipTunnelCurCfgMatch OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The match criteria IP address." ::= { ipTunnelCurCfgEntry 12 } ipTunnelCurCfgMatch6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The match criteria IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipTunnelCurCfgEntry 13 } ipTunnelCurCfgType OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- vxlan(2), ipinip(3), gre(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP tunnel interface." ::= { ipTunnelCurCfgEntry 14 } ipTunnelCurCfgDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The descriptive tunnel name." ::= { ipTunnelCurCfgEntry 15 } ipTunnelCurCfgGreKey OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The GRE tunnel key param." ::= { ipTunnelCurCfgEntry 16 } ipTunnelCurCfgInnerLocalIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local address." ::= { ipTunnelCurCfgEntry 17 } ipTunnelNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF IpTunnelNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ip tunnels configuration in the New Configuration Block." ::= { ipTunnelCfg 3 } ipTunnelNewCfgEntry OBJECT-TYPE SYNTAX IpTunnelNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the IP tunnel table" INDEX { ipTunnelNewCfgId } ::= { ipTunnelNewCfgTable 1 } IpTunnelNewCfgEntry ::= SEQUENCE { ipTunnelNewCfgId DisplayString, ipTunnelNewCfgIndex Integer32, ipTunnelNewCfgState INTEGER, ipTunnelNewCfgLocalMode INTEGER, ipTunnelNewCfgLocalIfId Integer32, ipTunnelNewCfgLocalVrId Integer32, ipTunnelNewCfgLocalHaName DisplayString, ipTunnelNewCfgIpVer INTEGER, ipTunnelNewCfgIpVerMatch INTEGER, ipTunnelNewCfgRemoteAddr4 IpAddress, ipTunnelNewCfgRemoteAddr6 DisplayString, ipTunnelNewCfgDelete INTEGER, ipTunnelNewCfgMatch IpAddress, ipTunnelNewCfgMatch6 DisplayString, ipTunnelNewCfgType INTEGER, ipTunnelNewCfgDescription DisplayString, ipTunnelNewCfgGreKey DisplayString, ipTunnelNewCfgInnerLocalIfId Integer32 } ipTunnelNewCfgId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP tunnel number for which the information is related." ::= { ipTunnelNewCfgEntry 1 } ipTunnelNewCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The tunnel Index." ::= { ipTunnelNewCfgEntry 2 } ipTunnelNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or Disable the IP tunnel interface." ::= { ipTunnelNewCfgEntry 3 } ipTunnelNewCfgLocalMode OBJECT-TYPE SYNTAX INTEGER{ disabled(1), if(2), floating(3), vr(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The tunnel local address mode." ::= { ipTunnelNewCfgEntry 4 } ipTunnelNewCfgLocalIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The tunnel local address." ::= { ipTunnelNewCfgEntry 5 } ipTunnelNewCfgLocalVrId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The tunnel local address." ::= { ipTunnelNewCfgEntry 6 } ipTunnelNewCfgLocalHaName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "The tunnel local HA id." ::= { ipTunnelNewCfgEntry 7 } ipTunnelNewCfgIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address." ::= { ipTunnelNewCfgEntry 8 } ipTunnelNewCfgIpVerMatch OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP address of the egress match criteria." ::= { ipTunnelNewCfgEntry 9 } ipTunnelNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row." ::= { ipTunnelNewCfgEntry 10 } ipTunnelNewCfgRemoteAddr4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The remote tunnel IP address." ::= { ipTunnelNewCfgEntry 11 } ipTunnelNewCfgRemoteAddr6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The remote tunnel IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipTunnelNewCfgEntry 12 } ipTunnelNewCfgMatch OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The match criteria IP address." ::= { ipTunnelNewCfgEntry 13 } ipTunnelNewCfgMatch6 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The match criteria IPv6 address. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx" ::= { ipTunnelNewCfgEntry 14 } ipTunnelNewCfgType OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- vxlan(2), ipinip(3), gre(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of IP tunnel interface." ::= { ipTunnelNewCfgEntry 15 } ipTunnelNewCfgDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The descriptive tunnel name." ::= { ipTunnelNewCfgEntry 16 } ipTunnelNewCfgGreKey OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The GRE tunnel key param." ::= { ipTunnelNewCfgEntry 17 } ipTunnelNewCfgInnerLocalIfId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The tunnel local inner address." ::= { ipTunnelNewCfgEntry 18 } -- Statistics -- RIP Statistics Group ripStatInPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good RIPv1 packets received. RIPv1 mibs are not supported anymore." ::= { ripStats 1 } ripStatOutPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv1 packets transmitted. RIPv1 mibs are not supported anymore." ::= { ripStats 2 } ripStatInErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error RIPv1 packets received. RIPv1 mibs are not supported anymore." ::= { ripStats 3 } ripStatRoutesAgedOut OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv1 routes which have aged out. RIPv1 mibs are not supported anymore." ::= { ripStats 4 } -- RIPv2 Statistics ripStatInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 packets received." ::= { rip2Stats 1 } ripStatOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 packets transmitted." ::= { rip2Stats 2 } ripStatInRequestPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 requests received." ::= { rip2Stats 3 } ripStatInResponsePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 response received." ::= { rip2Stats 4 } ripStatOutRequestPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 requests transmitted." ::= { rip2Stats 5 } ripStatOutResponsePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 responses transmitted." ::= { rip2Stats 6 } ripStatRouteTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 route timeouts." ::= { rip2Stats 7 } ripStatInBadSizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bad size RIPv2 packets received." ::= { rip2Stats 8 } ripStatInBadVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 bad versions received." ::= { rip2Stats 9 } ripStatInBadZeros OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 bad zeros received." ::= { rip2Stats 10 } ripStatInBadSourcePort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 bad source port received." ::= { rip2Stats 11 } ripStatInBadSourceIP OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 bad source IP received." ::= { rip2Stats 12 } ripStatInSelfRcvPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of RIPv2 packets from self received." ::= { rip2Stats 13 } -- TCP Statistics Group tcpStatCurConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outstanding TCP sessions that are currently opened." ::= { tcpStats 1 } tcpStatCurInConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of remotely-initiated TCP connections." ::= { tcpStats 2 } tcpStatCurOutConn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of switch-originated TCP connection requests." ::= { tcpStats 3 } -- ARP Statistics Group arpStatEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of ARP entries." ::= { arpStats 1 } arpStatHighWater OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of ARP entries." ::= { arpStats 2 } arpStatMaxEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of ARP entries." ::= { arpStats 3 } -- ARP SP Statistics Group arpSpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ArpSpStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ARP SP Stats." ::= { arpStats 4 } arpSpStatsTableEntry OBJECT-TYPE SYNTAX ArpSpStatsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ARP SP stats table." INDEX { arpSpStatSpIndex } ::= { arpSpStatsTable 1 } ArpSpStatsTableEntry ::= SEQUENCE { arpSpStatSpIndex Integer32, arpSpStatEntries Gauge32, arpSpStatHighWater Gauge32, arpSpStatMaxEntries Gauge32 } arpSpStatSpIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SP index." ::= { arpSpStatsTableEntry 1 } arpSpStatEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of SP ARP entries." ::= { arpSpStatsTableEntry 2 } arpSpStatHighWater OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of SP ARP entries." ::= { arpSpStatsTableEntry 3 } arpSpStatMaxEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of SP ARP entries." ::= { arpSpStatsTableEntry 4 } -- ROUTE Statistics Group routeStatEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of IP routes." ::= { routeStats 1 } routeStatHighWater OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of IP routes." ::= { routeStats 2 } routeStatMaxEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of IP routes." ::= { routeStats 3 } -- DNS Statistics dnsStatInGoodDnsRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DNS request packets which are received." ::= { dnsStats 1 } dnsStatInBadDnsRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DNS request packets received that were dropped." ::= { dnsStats 2 } dnsStatOutDnsRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DNS response packets that have been transmitted." ::= { dnsStats 3 } -- The VRRP Statistics vrrpStatInAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good VRRP advertisements which are received." ::= { vrrpStats 1 } vrrpStatOutAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good VRRP advertisements which are transmitted." ::= { vrrpStats 2 } vrrpStatOutBadAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP advertisements which are received." ::= { vrrpStats 3 } vrrpStatBadPassword OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP password." ::= { vrrpStats 4 } vrrpStatBadVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP version which are received." ::= { vrrpStats 5 } vrrpStatBadVrid OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP VR id which are received." ::= { vrrpStats 6 } vrrpStatBadAddress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP address which are received." ::= { vrrpStats 7 } vrrpStatBadData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP data which are received." ::= { vrrpStats 8 } vrrpStatBadInterval OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP Interval which are received." ::= { vrrpStats 9 } vrrpStatBadHaid OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP Haid which are received." ::= { vrrpStats 10 } -- Clear Statistics for ip and ip interface ipClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(2) results in clearing the IP statistics." ::= { clearStats 1 } ifStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF IfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Interface Statistics." ::= { clearStats 2 } ifStatsEntry OBJECT-TYPE SYNTAX IfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Interface statistics." INDEX { ifStatsIndex } ::= { ifStatsTable 1 } IfStatsEntry ::= SEQUENCE { ifStatsIndex Integer32, ifClearStats INTEGER } ifStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the IP interface for which these statistics apply." ::= { ifStatsEntry 1 } ifClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(2) results in clearing the statistics for this IP interface (if) stats." ::= { ifStatsEntry 2 } urlfClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(2) results in clearing the URL Filtering statistics." ::= { clearStats 3 } tunelClearStats OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to clear(2) results in clearing the IP Tunnel statistics." ::= { clearStats 4 } -- Ospf Statistics -- Ospf Statistics for all interfaces and OSPF areas ospfGeneralStats OBJECT IDENTIFIER ::= { ospfStats 1 } ospfCumRxTxStats OBJECT IDENTIFIER ::= { ospfGeneralStats 1 } ospfCumNbrChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 2 } ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats 3 } ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats 4 } -- Ospf Statistics / Area ospfArea OBJECT IDENTIFIER ::= { ospfStats 2 } ospfAreaRxTxStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Rx/Tx Statistics." ::= { ospfArea 1 } ospfAreaRxTxStatsEntry OBJECT-TYPE SYNTAX OspfAreaRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rx Tx packet Statistics about a OSPF area." INDEX { ospfAreaRxTxIndex } ::= { ospfAreaRxTxStats 1 } OspfAreaRxTxStatsEntry ::= SEQUENCE { ospfAreaRxTxIndex Integer32, ospfAreaRxPkts Counter32, ospfAreaTxPkts Counter32, ospfAreaRxHello Counter32, ospfAreaTxHello Counter32, ospfAreaRxDatabase Counter32, ospfAreaTxDatabase Counter32, ospfAreaRxlsReqs Counter32, ospfAreaTxlsReqs Counter32, ospfAreaRxlsAcks Counter32, ospfAreaTxlsAcks Counter32, ospfAreaRxlsUpdates Counter32, ospfAreaTxlsUpdates Counter32 } ospfAreaRxTxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ospf Area for which these statistics apply." ::= { ospfAreaRxTxStatsEntry 1 } ospfAreaRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets received in this OSPF area." ::= { ospfAreaRxTxStatsEntry 2 } ospfAreaTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets transmitted in this OSPF area." ::= { ospfAreaRxTxStatsEntry 3 } ospfAreaRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received in this OSPF area." ::= { ospfAreaRxTxStatsEntry 4 } ospfAreaTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets transmitted in this OSPF area." ::= { ospfAreaRxTxStatsEntry 5 } ospfAreaRxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 6 } ospfAreaTxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 7 } ospfAreaRxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets received for this OSPF area." ::= { ospfAreaRxTxStatsEntry 8 } ospfAreaTxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 9 } ospfAreaRxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets received for this OSPF area." ::= { ospfAreaRxTxStatsEntry 10 } ospfAreaTxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 11 } ospfAreaRxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets received for this OSPF area." ::= { ospfAreaRxTxStatsEntry 12 } ospfAreaTxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets transmitted for this OSPF area." ::= { ospfAreaRxTxStatsEntry 13 } ospfAreaNbrChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Neighbour Statistics." ::= { ospfArea 2 } ospfAreaNbrChangeStatsEntry OBJECT-TYPE SYNTAX OspfAreaNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area Neighbour Change Statistics about a OSPF area." INDEX { ospfAreaNbrIndex } ::= { ospfAreaNbrChangeStats 1 } OspfAreaNbrChangeStatsEntry ::= SEQUENCE { ospfAreaNbrIndex Integer32, ospfAreaNbrhello Counter32, ospfAreaNbrStart Counter32, ospfAreaNbrAdjointOk Counter32, ospfAreaNbrNegotiationDone Counter32, ospfAreaNbrExchangeDone Counter32, ospfAreaNbrBadRequests Counter32, ospfAreaNbrBadSequence Counter32, ospfAreaNbrLoadingDone Counter32, ospfAreaNbrN1way Counter32, ospfAreaNbrRstAd Counter32, ospfAreaNbrDown Counter32, ospfAreaNbrN2way Counter32 } ospfAreaNbrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ospf Area for which these statistics apply." ::= { ospfAreaNbrChangeStatsEntry 1 } ospfAreaNbrhello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 2 } ospfAreaNbrStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 3 } ospfAreaNbrAdjointOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 4 } ospfAreaNbrNegotiationDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 5 } ospfAreaNbrExchangeDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 6 } ospfAreaNbrBadRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 7 } ospfAreaNbrBadSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 8 } ospfAreaNbrLoadingDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of link state updates received for all out-of-date portions of the database in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 9 } ospfAreaNbrN1way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 10 } ospfAreaNbrRstAd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Neighbour adjacency has been reset across this OPSF area." ::= { ospfAreaNbrChangeStatsEntry 11 } ospfAreaNbrDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 12 } ospfAreaNbrN2way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area." ::= { ospfAreaNbrChangeStatsEntry 13 } ospfAreaChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Change Statistics." ::= { ospfArea 3 } ospfAreaChangeStatsEntry OBJECT-TYPE SYNTAX OspfAreaChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Area Change Statistics about a OSPF area." INDEX { ospfAreaIntfIndex } ::= { ospfAreaChangeStats 1 } OspfAreaChangeStatsEntry ::= SEQUENCE { ospfAreaIntfIndex Integer32, ospfAreaIntfHello Counter32, ospfAreaIntfDown Counter32, ospfAreaIntfLoop Counter32, ospfAreaIntfUnloop Counter32, ospfAreaIntfWaitTimer Counter32, ospfAreaIntfBackup Counter32, ospfAreaIntfNbrChange Counter32 } ospfAreaIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Area for which these statistics apply." ::= { ospfAreaChangeStatsEntry 1 } ospfAreaIntfHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets sent on this OSPF area." ::= { ospfAreaChangeStatsEntry 2 } ospfAreaIntfDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces down in this OSPF area." ::= { ospfAreaChangeStatsEntry 3 } ospfAreaIntfLoop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces no longer connected to the attatched network in this OSPF area." ::= { ospfAreaChangeStatsEntry 4 } ospfAreaIntfUnloop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces connected to the attatched network in this OSPF area.." ::= { ospfAreaChangeStatsEntry 5 } ospfAreaIntfWaitTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area." ::= { ospfAreaChangeStatsEntry 6 } ospfAreaIntfBackup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Backup Designated Routers on the attatched network for this OSPF area." ::= { ospfAreaChangeStatsEntry 7 } ospfAreaIntfNbrChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area." ::= { ospfAreaChangeStatsEntry 8 } ospfAreaErrorStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area Error Statistics." ::= { ospfArea 4 } ospfAreaErrorStatsEntry OBJECT-TYPE SYNTAX OspfAreaErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Error Statistics for an OSPF area." INDEX { ospfAreaErrIndex } ::= { ospfAreaErrorStats 1 } OspfAreaErrorStatsEntry ::= SEQUENCE { ospfAreaErrIndex Integer32, ospfAreaErrAuthFailure Counter32, ospfAreaErrNetmaskMismatch Counter32, ospfAreaErrHelloMismatch Counter32, ospfAreaErrDeadMismatch Counter32, ospfAreaErrOptionsMismatch Counter32, ospfAreaErrUnknownNbr Counter32 } ospfAreaErrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Area for which these statistics apply." ::= { ospfAreaErrorStatsEntry 1 } ospfAreaErrAuthFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong password in this area." ::= { ospfAreaErrorStatsEntry 2 } ospfAreaErrNetmaskMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong netmask in this area." ::= { ospfAreaErrorStatsEntry 3 } ospfAreaErrHelloMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different hello interval in this area." ::= { ospfAreaErrorStatsEntry 4 } ospfAreaErrDeadMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different dead interval in this area." ::= { ospfAreaErrorStatsEntry 5 } ospfAreaErrOptionsMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different options in this area." ::= { ospfAreaErrorStatsEntry 6 } ospfAreaErrUnknownNbr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received from an unknown neighbour in this area." ::= { ospfAreaErrorStatsEntry 7 } -- Ospf Statistics / Interface ospfInterface OBJECT IDENTIFIER ::= { ospfStats 3 } ospfIntfRxTxStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Rx/Tx packet Statistics." ::= { ospfInterface 1 } ospfIntfRxTxStatsEntry OBJECT-TYPE SYNTAX OspfIntfRxTxStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF interface Rx/Tx packet statistics." INDEX { ospfIntfRxTxIndex } ::= { ospfIntfRxTxStats 1 } OspfIntfRxTxStatsEntry ::= SEQUENCE { ospfIntfRxTxIndex Integer32, ospfIntfRxPkts Counter32, ospfIntfTxPkts Counter32, ospfIntfRxHello Counter32, ospfIntfTxHello Counter32, ospfIntfRxDatabase Counter32, ospfIntfTxDatabase Counter32, ospfIntfRxlsReqs Counter32, ospfIntfTxlsReqs Counter32, ospfIntfRxlsAcks Counter32, ospfIntfTxlsAcks Counter32, ospfIntfRxlsUpdates Counter32, ospfIntfTxlsUpdates Counter32 } ospfIntfRxTxIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF interface for which these statistics apply." ::= { ospfIntfRxTxStatsEntry 1 } ospfIntfRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 2 } ospfIntfTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 3 } ospfIntfRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 4 } ospfIntfTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 5 } ospfIntfRxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 6 } ospfIntfTxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 7 } ospfIntfRxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 8 } ospfIntfTxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Request packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 9 } ospfIntfRxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 10 } ospfIntfTxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Acknowledgement packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 11 } ospfIntfRxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets received for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 12 } ospfIntfTxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Update packets transmitted for this OSPF interface." ::= { ospfIntfRxTxStatsEntry 13 } ospfIntfNbrChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Neighbour change Statistics." ::= { ospfInterface 2 } ospfIntfNbrChangeStatsEntry OBJECT-TYPE SYNTAX OspfIntfNbrChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF interface Neighbour Change statistics." INDEX { ospfIntfNbrIndex } ::= { ospfIntfNbrChangeStats 1 } OspfIntfNbrChangeStatsEntry ::= SEQUENCE { ospfIntfNbrIndex Integer32, ospfIntfNbrhello Counter32, ospfIntfNbrStart Counter32, ospfIntfNbrAdjointOk Counter32, ospfIntfNbrNegotiationDone Counter32, ospfIntfNbrExchangeDone Counter32, ospfIntfNbrBadRequests Counter32, ospfIntfNbrBadSequence Counter32, ospfIntfNbrLoadingDone Counter32, ospfIntfNbrN1way Counter32, ospfIntfNbrRstAd Counter32, ospfIntfNbrDown Counter32, ospfIntfNbrN2way Counter32 } ospfIntfNbrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Interface for which these statistics apply." ::= { ospfIntfNbrChangeStatsEntry 1 } ospfIntfNbrhello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours in this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 2 } ospfIntfNbrStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 3 } ospfIntfNbrAdjointOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 4 } ospfIntfNbrNegotiationDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 5 } ospfIntfNbrExchangeDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 6 } ospfIntfNbrBadRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface." ::= { ospfIntfNbrChangeStatsEntry 7 } ospfIntfNbrBadSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface." ::= { ospfIntfNbrChangeStatsEntry 8 } ospfIntfNbrLoadingDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of link state updates received for all out-of-date portions of the database for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 9 } ospfIntfNbrN1way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 10 } ospfIntfNbrRstAd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Neighbour adjacency has been reset on this interface." ::= { ospfIntfNbrChangeStatsEntry 11 } ospfIntfNbrDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface." ::= { ospfIntfNbrChangeStatsEntry 12 } ospfIntfNbrN2way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface." ::= { ospfIntfNbrChangeStatsEntry 13 } ospfIntfChangeStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface change Statistics." ::= { ospfInterface 3 } ospfIntfChangeStatsEntry OBJECT-TYPE SYNTAX OspfIntfChangeStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "OSPF interface Change statistics." INDEX { ospfIntfIndex } ::= { ospfIntfChangeStats 1 } OspfIntfChangeStatsEntry ::= SEQUENCE { ospfIntfIndex Integer32, ospfIntfHello Counter32, ospfIntfDown Counter32, ospfIntfLoop Counter32, ospfIntfUnloop Counter32, ospfIntfWaitTimer Counter32, ospfIntfBackup Counter32, ospfIntfNbrChange Counter32 } ospfIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Interface for which these statistics apply." ::= { ospfIntfChangeStatsEntry 1 } ospfIntfHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Hello packets sent by this interface." ::= { ospfIntfChangeStatsEntry 2 } ospfIntfDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the interface was down." ::= { ospfIntfChangeStatsEntry 3 } ospfIntfLoop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the interface was no longer connected to the attatched network." ::= { ospfIntfChangeStatsEntry 4 } ospfIntfUnloop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the interface, connected back to the attatched network." ::= { ospfIntfChangeStatsEntry 5 } ospfIntfWaitTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface." ::= { ospfIntfChangeStatsEntry 6 } ospfIntfBackup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Backup Designated Routers on the attatched network for this OSPF interface." ::= { ospfIntfChangeStatsEntry 7 } ospfIntfNbrChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface." ::= { ospfIntfChangeStatsEntry 8 } ospfIntfErrorStats OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Error Statistics." ::= { ospfInterface 4 } ospfIntfErrorStatsEntry OBJECT-TYPE SYNTAX OspfIntfErrorStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Error Statistics for an OSPF area." INDEX { ospfIntfErrIndex } ::= { ospfIntfErrorStats 1 } OspfIntfErrorStatsEntry ::= SEQUENCE { ospfIntfErrIndex Integer32, ospfIntfErrAuthFailure Counter32, ospfIntfErrNetmaskMismatch Counter32, ospfIntfErrHelloMismatch Counter32, ospfIntfErrDeadMismatch Counter32, ospfIntfErrOptionsMismatch Counter32, ospfIntfErrUnknownNbr Counter32 } ospfIntfErrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the OSPF Intf for which these statistics apply." ::= { ospfIntfErrorStatsEntry 1 } ospfIntfErrAuthFailure OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong password in this area." ::= { ospfIntfErrorStatsEntry 2 } ospfIntfErrNetmaskMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a wrong netmask in this area." ::= { ospfIntfErrorStatsEntry 3 } ospfIntfErrHelloMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different hello interval in this area." ::= { ospfIntfErrorStatsEntry 4 } ospfIntfErrDeadMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different dead interval in this area." ::= { ospfIntfErrorStatsEntry 5 } ospfIntfErrOptionsMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with a different options in this area." ::= { ospfIntfErrorStatsEntry 6 } ospfIntfErrUnknownNbr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received from an unknown neighbour in this area." ::= { ospfIntfErrorStatsEntry 7 } -- Ospf General Statistics contains the cumulative stats for all -- areas / interfaces ospfCumRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all OSPF packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 1 } ospfCumTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all OSPF packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 2 } ospfCumRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Hello packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 3 } ospfCumTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Hello packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 4 } ospfCumRxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Database Description packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 5 } ospfCumTxDatabase OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Database Description packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 6 } ospfCumRxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Request packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 7 } ospfCumTxlsReqs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 8 } ospfCumRxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 9 } ospfCumTxlsAcks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 10 } ospfCumRxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Update packets received on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 11 } ospfCumTxlsUpdates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces." ::= { ospfCumRxTxStats 12 } ospfCumNbrhello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 1 } ospfCumNbrStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 2 } ospfCumNbrAdjointOk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 3 } ospfCumNbrNegotiationDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 4 } ospfCumNbrExchangeDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 5 } ospfCumNbrBadRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas." ::= { ospfCumNbrChangeStats 6 } ospfCumNbrBadSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 7 } ospfCumNbrLoadingDone OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 8 } ospfCumNbrN1way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas." ::= { ospfCumNbrChangeStats 9 } ospfCumNbrRstAd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces." ::= { ospfCumNbrChangeStats 10 } ospfCumNbrDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces." ::= { ospfCumNbrChangeStats 11 } ospfCumNbrN2way OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas." ::= { ospfCumNbrChangeStats 12 } ospfCumIntfHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Hello packets sent on all interfaces and areas" ::= { ospfCumIntfChangeStats 1 } ospfCumIntfDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of interfaces down in all OSPF areas." ::= { ospfCumIntfChangeStats 2 } ospfCumIntfLoop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces." ::= { ospfCumIntfChangeStats 3 } ospfCumIntfUnloop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of interfaces, connected to the attatched network in all OSPF areas." ::= { ospfCumIntfChangeStats 4 } ospfCumIntfWaitTimer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces." ::= { ospfCumIntfChangeStats 5 } ospfCumIntfBackup OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces." ::= { ospfCumIntfChangeStats 6 } ospfCumIntfNbrChange OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas." ::= { ospfCumIntfChangeStats 7 } ospfTmrsKckOffHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces." ::= { ospfTimersKickOffStats 1 } ospfTmrsKckOffRetransmit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces." ::= { ospfTimersKickOffStats 2 } ospfTmrsKckOffLsaLock OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces." ::= { ospfTimersKickOffStats 3 } ospfTmrsKckOffLsaAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces." ::= { ospfTimersKickOffStats 4 } ospfTmrsKckOffDbage OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Dbage has been fired." ::= { ospfTimersKickOffStats 5 } ospfTmrsKckOffSummary OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the Summary timer has been fired." ::= { ospfTimersKickOffStats 6 } ospfTmrsKckOffAseExport OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times the ASE Export timer has been fired." ::= { ospfTimersKickOffStats 7 } -- Ospfv3 Statistics -- Ospf Statistics for all interfaces and OSPF areas ospfv3GeneralStats OBJECT IDENTIFIER ::= { ospfv3Stats 1 } ospfv3StatsPackSent OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of packets sent." ::= { ospfv3GeneralStats 1 } ospfv3PacketRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "PacketRx stats." ::= { ospfv3GeneralStats 2 } ospfv3RxPacketDrop OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Num_rx_drop_packet." ::= { ospfv3GeneralStats 3 } ospfv3TxPacketDrop OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ospfv3 Num_Tx_drop_packet." ::= { ospfv3GeneralStats 4 } ospfv3RxBadPacket OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ospfv3 num_rx_bad_packet." ::= { ospfv3GeneralStats 5 } ospfv3SpfRunCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SPF stats." ::= { ospfv3GeneralStats 6 } ospfv3LastSpfRun OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SPF stats for ospfv3." ::= { ospfv3GeneralStats 7 } ospfv3LSDBtableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "LSDB size for ospfv3." ::= { ospfv3GeneralStats 8 } ospfv3BadLSReqCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bad LS req stats for ospfv3." ::= { ospfv3GeneralStats 9 } ospfv3SeqMismatchCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seq mismatch stats for ospfv3." ::= { ospfv3GeneralStats 10 } -- VRRP6 Stats vrrp6StatInAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good VRRP6 advertisements which are received." ::= { vrrp6Stats 1 } vrrp6StatOutAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of good VRRP6 advertisements which are transmitted." ::= { vrrp6Stats 2 } vrrp6StatOutBadAdvers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP6 advertisements which are received." ::= { vrrp6Stats 3 } vrrp6StatBadVersion OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP6 version which are received." ::= { vrrp6Stats 4 } vrrp6StatBadVrid OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP6 VR id which are received." ::= { vrrp6Stats 5 } vrrp6StatBadAddress OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP6 address which are received." ::= { vrrp6Stats 6 } vrrp6StatBadData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP7 data which are received." ::= { vrrp6Stats 7 } vrrp6StatBadInterval OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP6 Interval which are received." ::= { vrrp6Stats 8 } vrrp6StatBadHaid OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bad VRRP6 Haid which are received." ::= { vrrp6Stats 9 } -- End of VRRP6 stats -- IP Tunnel stats ipTunnelStatTable OBJECT-TYPE SYNTAX SEQUENCE OF IpTunnelStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Tunnel statistics table." ::= { ipTunnelStats 1 } ipTunnelStatEntry OBJECT-TYPE SYNTAX IpTunnelStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics of IP Tunnel entry." INDEX { ipTunnelStatId } ::= { ipTunnelStatTable 1 } IpTunnelStatEntry ::= SEQUENCE { ipTunnelStatId DisplayString, ipTunnelStatIndex Integer32, ipTunnelStatState INTEGER, ipTunnelStatType INTEGER, ipTunnelStatDescription DisplayString, ipTunnelStatCurrSess Gauge32, ipTunnelStatTotSess Gauge32, ipTunnelStatHighSess Gauge32, ipTunnelStatOctets Counter64 } ipTunnelStatId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IP tunnel number for which the information is related." ::= { ipTunnelStatEntry 1 } ipTunnelStatIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel local index" ::= { ipTunnelStatEntry 2 } ipTunnelStatState OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or Disable the IP tunnel interface." ::= { ipTunnelStatEntry 3 } ipTunnelStatType OBJECT-TYPE SYNTAX INTEGER { disabled(1), -- vxlan(2), ipinip(3), gre(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP tunnel interface." ::= { ipTunnelStatEntry 4 } ipTunnelStatDescription OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The descriptive tunnel name." ::= { ipTunnelStatEntry 5 } ipTunnelStatCurrSess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that are currently handled by IP Tunnel entry." ::= { ipTunnelStatEntry 6 } ipTunnelStatTotSess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions that are handled by this IP Tunnel entry." ::= { ipTunnelStatEntry 7 } ipTunnelStatHighSess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of sessions that are handled by this IP Tunnel entry." ::= { ipTunnelStatEntry 8 } ipTunnelStatOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total octets that are handled by this IP Tunnel entry." ::= { ipTunnelStatEntry 9} -- End of IP Tunnel stats ip6InReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input datagrams received from interfaces, including those received in error." ::= { ip6Stats 1 } ip6ForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination." ::= { ip6Stats 2 } ip6InDelivers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of input datagrams successfully delivered to IP user-protocols (including ICMP)." ::= { ip6Stats 3 } ip6InDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly." ::= { ip6Stats 4 } ip6InUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol." ::= { ip6Stats 5 } ip6InAddrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity." ::= { ip6Stats 6 } ip6OutRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams." ::= { ip6Stats 7 } ip6OutNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this Counter32 includes any packets counted in ipForwDatagrams which meet this`no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default gateways are down." ::= { ip6Stats 8 } ip6ReasmOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IP datagrams successfully re-assembled." ::= { ip6Stats 9 } ip6ReasmFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failures detected by the IP re-assembly." ::= { ip6Stats 10 } ip6icmpInMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages received. Note that this Counter32 includes all those counted by icmpInErrors." ::= { ip6Stats 11 } ip6icmpOutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages attempted to send. Note that this Counter32 includes all those counted by icmp6OutErrors." ::= { ip6Stats 12} ip6icmpInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { ip6Stats 13 } ip6icmpOutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages did not send due to problems discovered within ICMP such as a lack of buffers." ::= { ip6Stats 14} icmp6StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Icmp6StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for ICMP6." ::= { icmp6Stats 1 } icmp6StatsEntry OBJECT-TYPE SYNTAX Icmp6StatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for IGMP Snooping." INDEX { icmp6StatsIndx} ::= { icmp6StatsTable 1 } Icmp6StatsEntry ::= SEQUENCE { icmp6StatsIndx Integer32, icmp6IntfIndex Integer32, icmp6InMsgs Counter32, icmp6InErrors Counter32, icmp6InEchos Counter32, icmp6InEchoReps Counter32, icmp6InNSs Counter32, icmp6InNAs Counter32, icmp6InRSs Counter32, icmp6InRAs Counter32, icmp6InDestUnreachs Counter32, icmp6InTimeExcds Counter32, icmp6InTooBigs Counter32, icmp6InParmProbs Counter32, icmp6InRedirects Counter32, icmp6OutMsgs Counter32, icmp6OutErrors Counter32, icmp6OutEchos Counter32, icmp6OutEchoReps Counter32, icmp6OutNSs Counter32, icmp6OutNAs Counter32, icmp6OutRSs Counter32, icmp6OutRAs Counter32, icmp6OutRedirects Counter32 } icmp6StatsIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this statistics table." ::= { icmp6StatsEntry 1 } icmp6IntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "IP interface index in interface configuration table." ::= { icmp6StatsEntry 2 } icmp6InMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages received. Note that this Counter32 includes all those counted by icmpInErrors." ::= { icmp6StatsEntry 3 } icmp6InErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." ::= { icmp6StatsEntry 4 } icmp6InEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo request messages received." ::= { icmp6StatsEntry 5 } icmp6InEchoReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo Reply messages received." ::= { icmp6StatsEntry 6 } icmp6InNSs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbour solicitations received." ::= { icmp6StatsEntry 7 } icmp6InNAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbour advertisements received." ::= { icmp6StatsEntry 8 } icmp6InRSs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router solicitations received." ::= { icmp6StatsEntry 9 } icmp6InRAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router advertisements received." ::= { icmp6StatsEntry 10 } icmp6InDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Destination Unreachable messages received." ::= { icmp6StatsEntry 11 } icmp6InTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Time Exceeded messages received." ::= { icmp6StatsEntry 12 } icmp6InTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP too big messages received." ::= { icmp6StatsEntry 13 } icmp6InParmProbs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Parameter Problem messages received." ::= { icmp6StatsEntry 14 } icmp6InRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Redirect messages received." ::= { icmp6StatsEntry 15 } icmp6OutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ICMP messages which this entity attempted to send. Note that this Counter32 includes all those counted by icmp6OutErrors." ::= { icmp6StatsEntry 16 } icmp6OutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers." ::= { icmp6StatsEntry 17 } icmp6OutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo request messages sent." ::= { icmp6StatsEntry 18 } icmp6OutEchoReps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Echo Reply messages sent." ::= { icmp6StatsEntry 19 } icmp6OutNSs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbour solicitations sent." ::= { icmp6StatsEntry 20 } icmp6OutNAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbour advertisements sent." ::= { icmp6StatsEntry 21 } icmp6OutRSs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router solicitations sent." ::= { icmp6StatsEntry 22 } icmp6OutRAs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router advertisements sent." ::= { icmp6StatsEntry 23 } icmp6OutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects." ::= { icmp6StatsEntry 24 } ip6GwStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF Ip6GwStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for IP6 Gateway." ::= { ip6gwStats 1 } ip6GwStatsEntry OBJECT-TYPE SYNTAX Ip6GwStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for IP6 Gateway." INDEX { ip6GwStatsIndex} ::= { ip6GwStatsTable 1 } Ip6GwStatsEntry ::= SEQUENCE { ip6GwStatsIndex Integer32, ip6GwIndex Integer32, ip6GwEchoreq Counter32, ip6GwEchoresp Counter32, ip6GwFails Counter32, ip6GwMaster Integer32, ip6IfIndex Integer32, ip6GwRetry Counter32 } ip6GwStatsIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of Gw6 statistics." ::= { ip6GwStatsEntry 1} ip6GwIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Gateway index in gateway configuration table." ::= { ip6GwStatsEntry 2} ip6GwEchoreq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GW Echo request messages ." ::= { ip6GwStatsEntry 3 } ip6GwEchoresp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GW Echo response messages ." ::= { ip6GwStatsEntry 4 } ip6GwFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of GWs fails." ::= { ip6GwStatsEntry 5 } ip6GwMaster OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The master gateway." ::= { ip6GwStatsEntry 6 } ip6IfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP6 interface." ::= { ip6GwStatsEntry 7 } ip6GwRetry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of retries." ::= { ip6GwStatsEntry 8 } -- Information - Run-time IP Route Table ipIntfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP interface information." ::= {ipIntfInfo 1 } intfInfoEntry OBJECT-TYPE SYNTAX IntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in IP interface information table." INDEX { intfInfoIndex } ::= { ipIntfInfoTable 1 } IntfInfoEntry ::= SEQUENCE { intfInfoIndex Integer32, intfInfoIpver INTEGER, intfInfoAddr DisplayString, intfInfoNetMask DisplayString, intfInfoBcastAddr DisplayString, intfInfoVlan Integer32, intfInfoLinkLocalAddr DisplayString, intfInfoStatus INTEGER, intfInfoBfd INTEGER } intfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the information is related." ::= { intfInfoEntry 1} intfInfoIpver OBJECT-TYPE SYNTAX INTEGER { ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address." ::= { intfInfoEntry 2 } intfInfoAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface." ::= { intfInfoEntry 3 } intfInfoNetMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the interface." ::= { intfInfoEntry 4 } intfInfoBcastAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The broadcast address of the interface." ::= { intfInfoEntry 5 } intfInfoVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN number for this interface." ::= { intfInfoEntry 6 } intfInfoStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the interface." ::= { intfInfoEntry 7 } intfInfoLinkLocalAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The site local address of the interface." ::= { intfInfoEntry 8 } intfInfoBfd OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Gives information whether BFD is on/off on the interface." ::= { intfInfoEntry 9 } ipRouteInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRouteInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of run-time IP routes." ::= { ipRoutingInfo 1 } ipRouteInfoEntry OBJECT-TYPE SYNTAX IpRouteInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the run-time IP route table" INDEX { ipRouteInfoIndx } ::= { ipRouteInfoTable 1 } IpRouteInfoEntry ::= SEQUENCE { ipRouteInfoIndx Integer32, ipRouteInfoDestIp IpAddress, ipRouteInfoMask IpAddress, ipRouteInfoGateway IpAddress, ipRouteInfoTag INTEGER, ipRouteInfoType INTEGER, ipRouteInfoInterface Integer32, ipRouteInfoGateway1 IpAddress, ipRouteInfoGateway2 IpAddress, ipRouteInfoMetric Integer32, ipRouteInfoTunnelId DisplayString, ipRouteInfoMode INTEGER } ipRouteInfoIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this route table." ::= { ipRouteInfoEntry 1 } ipRouteInfoDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route." ::= { ipRouteInfoEntry 2 } ipRouteInfoMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP mask of this route." ::= { ipRouteInfoEntry 3 } ipRouteInfoGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The next-hop router address for this route." ::= { ipRouteInfoEntry 4 } ipRouteInfoTag OBJECT-TYPE SYNTAX INTEGER { fixed(1), static(2), addr(3), rip(4), broadcast(5), martian(6), multicast(7), vip(8), bgp(9), ospf(10), none(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "The tag-type for this route." ::= { ipRouteInfoEntry 5 } ipRouteInfoType OBJECT-TYPE SYNTAX INTEGER { indirect(1), direct(2), local(3), broadcast(4), martian(5), multicast(6), other(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the route." ::= { ipRouteInfoEntry 6 } ipRouteInfoInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the destination address is applicable." ::= { ipRouteInfoEntry 7 } ipRouteInfoGateway1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The next-hop router address for this route." ::= { ipRouteInfoEntry 8 } ipRouteInfoGateway2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The next-hop router address for this route." ::= { ipRouteInfoEntry 9 } ipRouteInfoMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Metric for this route." ::= { ipRouteInfoEntry 10 } ipRouteInfoTunnelId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tunnel Id for this route." ::= { ipRouteInfoEntry 11 } ipRouteInfoMode OBJECT-TYPE SYNTAX INTEGER { gateway(1), tunnel(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Route mode - gateway or tunnel route." ::= { ipRouteInfoEntry 12 } routeTableClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the route table." ::= { ipRoutingInfo 2 } -- Run Time ARP Table arpInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AgArpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of ARP entries." ::= { arpInfo 1 } arpInfoEntry OBJECT-TYPE SYNTAX AgArpInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the ARP table" INDEX { arpInfoDestIp } ::= { arpInfoTable 1 } AgArpInfoEntry ::= SEQUENCE { arpInfoDestIp IpAddress, arpInfoMacAddr PhysAddress, arpInfoVLAN Integer32, arpInfoSrcPort Integer32, arpInfoRefPorts Integer32, arpInfoFlag INTEGER, arpInfoRefSPs DisplayString } arpInfoDestIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of the ARP entry." ::= { arpInfoEntry 1 } arpInfoMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for the ARP entry." ::= { arpInfoEntry 2 } arpInfoVLAN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN identifier for the ARP entry." ::= { arpInfoEntry 3 } arpInfoSrcPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number on which this entry's equivalence is effective." ::= { arpInfoEntry 4 } arpInfoRefPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mask of reference SPs associated with this ARP entry." ::= { arpInfoEntry 5 } arpInfoFlag OBJECT-TYPE SYNTAX INTEGER { clear(1), unresolved(2), permanent(3), indirect(4), layer4(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The flag associated with this ARP entry." ::= { arpInfoEntry 6 } arpInfoRefSPs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The reference SPs associated with this ARP entry." ::= { arpInfoEntry 7 } arpCacheClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the ARP cache." ::= { arpInfo 2 } -- VRRP Information vrrpInfoVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpInfoVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VRRP virtual router run-time information." ::= { vrrpInfo 1 } vrrpInfoVirtRtrTableEntry OBJECT-TYPE SYNTAX VrrpInfoVirtRtrTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The run-time information about a VRRP virtual router." INDEX { vrrpInfoVirtRtrIndex } ::= { vrrpInfoVirtRtrTable 1 } VrrpInfoVirtRtrTableEntry ::= SEQUENCE { vrrpInfoVirtRtrIndex Integer32, vrrpInfoVirtRtrState INTEGER, vrrpInfoVirtRtrOwnership INTEGER, vrrpInfoVirtRtrServer INTEGER, vrrpInfoVirtRtrProxy INTEGER, vrrpInfoVirtRtrPriority Integer32 } vrrpInfoVirtRtrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router index." ::= { vrrpInfoVirtRtrTableEntry 1 } vrrpInfoVirtRtrState OBJECT-TYPE SYNTAX INTEGER { init(1), master(2), backup(3), holdoff(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router state." ::= { vrrpInfoVirtRtrTableEntry 2 } vrrpInfoVirtRtrOwnership OBJECT-TYPE SYNTAX INTEGER { owner(1), renter(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router ownership status." ::= { vrrpInfoVirtRtrTableEntry 3 } vrrpInfoVirtRtrServer OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP server state identifies virtual routers that support Layer 4 services." ::= { vrrpInfoVirtRtrTableEntry 4 } vrrpInfoVirtRtrProxy OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP proxy state identifies virtual proxy routers." ::= { vrrpInfoVirtRtrTableEntry 5 } vrrpInfoVirtRtrPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VRRP virtual router priority." ::= { vrrpInfoVirtRtrTableEntry 6 } vrrpInfoHAState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The global VRRP or HA state" ::= { vrrpInfo 2 } -- Ospf Information ospfGeneralInfo OBJECT IDENTIFIER ::= { ospfinfo 1 } ospfStartTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time when ospf has been started." ::= { ospfGeneralInfo 1 } ospfProcessUptime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time since ospf has been started." ::= { ospfGeneralInfo 2 } ospfLsTypesSupported OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Link State Types that are supported." ::= { ospfGeneralInfo 3 } ospfIntfCountForRouter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of interfaces for this router." ::= { ospfGeneralInfo 4 } ospfVlinkCountForRouter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of virtual links for this router." ::= { ospfGeneralInfo 5 } ospfTotalNeighbours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of OSPF neighbours." ::= { ospfGeneralInfo 6 } ospfNbrInInitState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbours in the initial state of exchange." ::= { ospfGeneralInfo 7 } ospfNbrInExchState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbours in the exchange state." ::= { ospfGeneralInfo 8 } ospfNbrInFullState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of neighbours in the Full state of exchange." ::= { ospfGeneralInfo 9 } ospfTotalAreas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of areas." ::= { ospfGeneralInfo 10 } ospfTotalTransitAreas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of Transit areas." ::= { ospfGeneralInfo 11 } ospfTotalNssaAreas OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of NSSA areas." ::= { ospfGeneralInfo 12 } ospfAreaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfAreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Area information." ::= { ospfinfo 2 } ospfAreaInfoEntry OBJECT-TYPE SYNTAX OspfAreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF area." INDEX { ospfAreaInfoIndex } ::= { ospfAreaInfoTable 1 } OspfAreaInfoEntry ::= SEQUENCE { ospfAreaInfoIndex Integer32, ospfTotalNumberOfInterfaces Integer32, ospfNumberOfInterfacesUp Integer32, ospfNumberOfLsdbEntries Integer32, ospfAreaInfoId IpAddress } ospfAreaInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF area number for which the OSPF info table is related." ::= { ospfAreaInfoEntry 1} ospfTotalNumberOfInterfaces OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of interfaces for this OSPF area." ::= { ospfAreaInfoEntry 2} ospfNumberOfInterfacesUp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of interfaces UP in area." ::= { ospfAreaInfoEntry 3} ospfNumberOfLsdbEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Link State Database entries for this OSPF area." ::= { ospfAreaInfoEntry 4} ospfAreaInfoId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the OSPF area." ::= { ospfAreaInfoEntry 5} ospfIntfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface information." ::= { ospfinfo 3 } ospfIntfInfoEntry OBJECT-TYPE SYNTAX OspfIntfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF interface." INDEX { ospfIfInfoIndex } ::= { ospfIntfInfoTable 1 } OspfIntfInfoEntry ::= SEQUENCE { ospfIfInfoIndex Integer32, ospfIfDesignatedRouterIP IpAddress, ospfIfBackupDesignatedRouterIP IpAddress, ospfIfWaitInterval Integer32, ospfIfTotalNeighbours Integer32, ospfIfInfoIpAddress IpAddress } ospfIfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF interface number for which the OSPF info table is related." ::= { ospfIntfInfoEntry 1} ospfIfDesignatedRouterIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Designated Router ID (IP Address) for this OSPF interface." ::= { ospfIntfInfoEntry 2} ospfIfBackupDesignatedRouterIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Backup Designated Router ID (IP Address) for this OSPF interface." ::= { ospfIntfInfoEntry 3} ospfIfWaitInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Wait interval for this OSPF interface." ::= { ospfIntfInfoEntry 4} ospfIfTotalNeighbours OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Total number of neighbours for this OSPF interface." ::= { ospfIntfInfoEntry 5} ospfIfInfoIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the OSPF interface." ::= { ospfIntfInfoEntry 6} -- OSPF Interface/Nbr Info Table ospfIfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF OspfIfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPF Interface Neighbour information." ::= { ospfinfo 5 } ospfIfNbrEntry OBJECT-TYPE SYNTAX OspfIfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPF interface, neighbour pair." INDEX { ospfIfNbrIntfIndex, ospfIfNbrIpAddr } ::= { ospfIfNbrTable 1 } OspfIfNbrEntry ::= SEQUENCE { ospfIfNbrIntfIndex Integer32, ospfIfNbrIpAddr IpAddress, ospfIfNbrPriority Integer32, ospfIfNbrState INTEGER, ospfIfNbrDesignatedRtr IpAddress, ospfIfNbrBackupDesignatedRtr IpAddress, ospfIfNbrIpAddress IpAddress } ospfIfNbrIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Interface number for which this Interface/Nbr table is related." ::= { ospfIfNbrEntry 1} ospfIfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF Neighbour ID ." ::= { ospfIfNbrEntry 2 } ospfIfNbrPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the OSPF neighbour." ::= { ospfIfNbrEntry 3 } ospfIfNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoway(4), exStart(5), exchange(6), loading(7), full(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the OSPF neighbour." ::= { ospfIfNbrEntry 4 } ospfIfNbrDesignatedRtr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the Designated Router for this OSPF Neighbour." ::= { ospfIfNbrEntry 5 } ospfIfNbrBackupDesignatedRtr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the backup designated Router for this OSPF Neighbour." ::= { ospfIfNbrEntry 6 } ospfIfNbrIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of the OSPF Neighbour." ::= { ospfIfNbrEntry 7 } -- Gateway Information gatewayInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GatewayInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing information for the default gateways." ::= { gatewayInfo 1 } gatewayInfoEntry OBJECT-TYPE SYNTAX GatewayInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the gateway information table" INDEX { gatewayInfoIndex } ::= { gatewayInfoTable 1 } GatewayInfoEntry ::= SEQUENCE { gatewayInfoIndex Integer32, gatewayInfoAddr IpAddress, gatewayInfoVlan Integer32, gatewayInfoAddr6 DisplayString, gatewayInfoStatus INTEGER } gatewayInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway number for which the information is related." ::= { gatewayInfoEntry 1} gatewayInfoAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the default gateway." ::= { gatewayInfoEntry 2 } gatewayInfoVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN number for this gateway." ::= { gatewayInfoEntry 3 } gatewayInfoStatus OBJECT-TYPE SYNTAX INTEGER { up(1), failed(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the default gateway." ::= { gatewayInfoEntry 4 } gatewayInfoAddr6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP6 address of the default gateway." ::= { gatewayInfoEntry 5 } -- nbrcache Info Table nbrcacheInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF NbrcacheInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of nbrcache information." ::= { nbrcacheInfo 1 } nbrcacheInfoEntry OBJECT-TYPE SYNTAX NbrcacheInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about neighbour discovery protocol." INDEX { nbrcacheInfoIndex } ::= { nbrcacheInfoTable 1 } NbrcacheInfoEntry ::= SEQUENCE { nbrcacheInfoIndex Integer32, nbrcacheInfoDestIp DisplayString, nbrcacheInfoState INTEGER, nbrcacheInfoType INTEGER, nbrcacheInfoMacAddr PhysAddress, nbrcacheInfoVlanId Integer32, nbrcacheInfoPortNum Integer32 } nbrcacheInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the nbrcache entry." ::= { nbrcacheInfoEntry 1 } nbrcacheInfoDestIp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of the nbrcache entry." ::= { nbrcacheInfoEntry 2 } nbrcacheInfoState OBJECT-TYPE SYNTAX INTEGER { undef(1), reach(2), stale(3), delay(4), probe(5), inval(6), unknown(7), incmp(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the nbrcache entry." ::= { nbrcacheInfoEntry 3 } nbrcacheInfoType OBJECT-TYPE SYNTAX INTEGER { undef(1), other(2), invalid(3), dynamic(4), static(5), local(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the nbrcache entry." ::= { nbrcacheInfoEntry 4 } nbrcacheInfoMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for the nbrcache entry." ::= { nbrcacheInfoEntry 5 } nbrcacheInfoVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN identifier for the nbrcache entry." ::= { nbrcacheInfoEntry 6 } nbrcacheInfoPortNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The port number on which this entry's equivalence is effective." ::= { nbrcacheInfoEntry 7 } nbrcacheClear OBJECT-TYPE SYNTAX INTEGER { ok(1), clear(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this value to clear(2) clears the Nbr cache, When read ok(1) is returned." ::= { nbrcacheInfo 2 } nbrcacheInfoTotDynamicEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of dynamic neighbour cache entries." ::= { nbrcacheInfo 3 } nbrcacheInfoTotLocalEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of local neighbour cache entries." ::= { nbrcacheInfo 4 } nbrcacheInfoTotOtherEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of other neighbour cache entries." ::= { nbrcacheInfo 5 } nbrcacheInfoTotStaticEntries OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of static neighbour cache entries." ::= { nbrcacheInfo 6 } ipRoute6InfoTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRoute6InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of run-time IP6 routes." ::= { ipRoute6Info 1 } ipRoute6InfoEntry OBJECT-TYPE SYNTAX IpRoute6InfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the run-time IP6 route table." INDEX { ipRoute6InfoIndx } ::= { ipRoute6InfoTable 1 } IpRoute6InfoEntry ::= SEQUENCE { ipRoute6InfoIndx Integer32, ipRoute6InfoDestIp6 DisplayString, ipRoute6InfoInterface Integer32, ipRoute6InfoNextHop DisplayString, ipRoute6InfoProto INTEGER, ipRoute6InfoTunnelId DisplayString, ipRoute6InfoMode INTEGER } ipRoute6InfoIndx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of this route6 table." ::= { ipRoute6InfoEntry 1 } ipRoute6InfoDestIp6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The destination of the route." ::= { ipRoute6InfoEntry 2 } ipRoute6InfoInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface of the route." ::= { ipRoute6InfoEntry 3 } ipRoute6InfoNextHop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The next hop of the route." ::= { ipRoute6InfoEntry 4 } ipRoute6InfoProto OBJECT-TYPE SYNTAX INTEGER { isis(1), rip(2), ospf(3), static(4), local(5), bgp(6), stlow(7), ospfi(8), ospfe(9), ospfe2(10), ospfa(11), ripa(12), bgpa(13), igmp(14), unknown(15), natpt(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol type of the route." ::= { ipRoute6InfoEntry 5 } ipRoute6InfoTunnelId OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "Tunnel Id for this route." ::= { ipRoute6InfoEntry 6 } ipRoute6InfoMode OBJECT-TYPE SYNTAX INTEGER { gateway(1), tunnel(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Route mode - gateway or tunnel route." ::= { ipRoute6InfoEntry 7 } rip2GeneralInfo OBJECT IDENTIFIER ::= { rip2Info 1 } ripInfoState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP global state." ::= { rip2GeneralInfo 1 } ripInfoUpdatePeriod OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-only STATUS current DESCRIPTION "Update Period in seconds." ::= { rip2GeneralInfo 2 } ripInfoVip OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Advertise VIP Host Routes." ::= { rip2GeneralInfo 3 } ripInfoStaticSupply OBJECT-TYPE SYNTAX INTEGER { enabled(2), disabled(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Advertise Static Routes." ::= { rip2GeneralInfo 4 } rip2InfoIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF RipInfoIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information table of RIP." ::= { rip2Info 2 } ripInfoIntfEntry OBJECT-TYPE SYNTAX RipInfoIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about RIP on IP interface." INDEX { ripInfoIntfIndex } ::= { rip2InfoIntfTable 1 } RipInfoIntfEntry ::= SEQUENCE { ripInfoIntfIndex Integer32, ripInfoIntfVersion INTEGER, ripInfoIntfAddress IpAddress, ripInfoIntfState INTEGER, ripInfoIntfListen INTEGER, ripInfoIntfTrigUpdate INTEGER, ripInfoIntfMcastUpdate INTEGER, ripInfoIntfPoisonReverse INTEGER, ripInfoIntfSupply INTEGER, ripInfoIntfMetric INTEGER, ripInfoIntfAuth INTEGER, ripInfoIntfKey DisplayString, ripInfoIntfDefault INTEGER } ripInfoIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface number for which the RIP information is related." ::= { ripInfoIntfEntry 1 } ripInfoIntfVersion OBJECT-TYPE SYNTAX INTEGER { ripVersion1(1), ripVersion2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RIP version." ::= { ripInfoIntfEntry 2 } ripInfoIntfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The interface address." ::= { ripInfoIntfEntry 3 } ripInfoIntfState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of RIP protocol." ::= { ripInfoIntfEntry 4 } ripInfoIntfListen OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of listening to route updates." ::= { ripInfoIntfEntry 5 } ripInfoIntfTrigUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of triggered updates." ::= { ripInfoIntfEntry 6 } ripInfoIntfMcastUpdate OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of multicast updates." ::= { ripInfoIntfEntry 7 } ripInfoIntfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of RIP poison reverse." ::= { ripInfoIntfEntry 8 } ripInfoIntfSupply OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of supplying route updates." ::= { ripInfoIntfEntry 9 } ripInfoIntfMetric OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP route metric for this interface." ::= { ripInfoIntfEntry 10 } ripInfoIntfAuth OBJECT-TYPE SYNTAX INTEGER { none(1), password(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of Authentication used on this interface." ::= { ripInfoIntfEntry 11 } ripInfoIntfKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP update authentication password." ::= { ripInfoIntfEntry 12 } ripInfoIntfDefault OBJECT-TYPE SYNTAX INTEGER { both(1), listen(2), supply(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies what RIP does with default routes." ::= { ripInfoIntfEntry 13 } rip2RoutesInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Rip2RoutesInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of rip routes." ::= { rip2RoutesInfo 1 } rip2RoutesInfoEntry OBJECT-TYPE SYNTAX Rip2RoutesInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about rip routes." INDEX { rip2RoutesInfoDestIndex, rip2RoutesInfoNxtHopIndex } ::= { rip2RoutesInfoTable 1 } Rip2RoutesInfoEntry ::= SEQUENCE { rip2RoutesInfoDestIndex Integer32, rip2RoutesInfoNxtHopIndex Integer32, rip2RoutesInfoDestination DisplayString, rip2RoutesInfoIpAddress IpAddress, rip2RoutesInfoMetric INTEGER } rip2RoutesInfoDestIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the rip routes." ::= { rip2RoutesInfoEntry 1 } rip2RoutesInfoNxtHopIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the next hop." ::= { rip2RoutesInfoEntry 2 } rip2RoutesInfoDestination OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The destination of the rip route." ::= { rip2RoutesInfoEntry 3 } rip2RoutesInfoIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ipaddress of the next hop." ::= { rip2RoutesInfoEntry 4 } rip2RoutesInfoMetric OBJECT-TYPE SYNTAX INTEGER ( 1..15 ) MAX-ACCESS read-only STATUS current DESCRIPTION "RIP route metric for this route." ::= { rip2RoutesInfoEntry 5 } allowedNwInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AllowedNwInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of allowed network run-time information." ::= { allowedNwInfo 1 } allowedNwInfoEntry OBJECT-TYPE SYNTAX AllowedNwInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the allowed network information table." INDEX { allowedNwInfoIndex } ::= { allowedNwInfoTable 1 } AllowedNwInfoEntry ::= SEQUENCE { allowedNwInfoIndex Integer32, allowedNwInfoIpver INTEGER, allowedNwInfoVlan Integer32, allowedNwInfoBeginIpAddr DisplayString, allowedNwInfoEndIpAddr DisplayString, allowedNwInfoNetMask DisplayString, allowedNwInfoIp6Prefix Integer32 } allowedNwInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The allowed network index" ::= { allowedNwInfoEntry 1 } allowedNwInfoIpver OBJECT-TYPE SYNTAX INTEGER { ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of IP address." ::= { allowedNwInfoEntry 2 } allowedNwInfoVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN that the allowed network belongs to." ::= { allowedNwInfoEntry 3 } allowedNwInfoBeginIpAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The begin IP address of the allowed network." ::= { allowedNwInfoEntry 4 } allowedNwInfoEndIpAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The begin IP address of the allowed network." ::= { allowedNwInfoEntry 5 } allowedNwInfoNetMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The subnet mask of the allowed network." ::= { allowedNwInfoEntry 6 } allowedNwInfoIp6Prefix OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The prefix length of the IP6 allowed network." ::= { allowedNwInfoEntry 7 } -- Ospfv3 Information ospfv3GeneralInfo OBJECT IDENTIFIER ::= { ospfv3info 1 } ospfv3RouterID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Router ID for ospfv3." ::= { ospfv3GeneralInfo 1 } ospfv3AdminState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ospfv3 ena/dis state." ::= { ospfv3GeneralInfo 2 } ospfv3ASBRstatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "ASBR status for ospfv3." ::= { ospfv3GeneralInfo 3 } ospfv3ABRStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Ospfv3 ABR status." ::= { ospfv3GeneralInfo 4 } ospfv3ASscopeLSAcnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count for AS scope LSA." ::= { ospfv3GeneralInfo 5 } ospfv3RcvLSAcnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received LSA count for ospfv3." ::= { ospfv3GeneralInfo 6 } ospfv3NewLSAcnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "New LSA count for ospfv3." ::= { ospfv3GeneralInfo 7 } ospfv3MulticstExt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Multicast extentions for ospfv3." ::= { ospfv3GeneralInfo 8 } ospfv3AreaInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3AreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Area information." ::= { ospfv3info 2 } ospfv3AreaInfoEntry OBJECT-TYPE SYNTAX Ospfv3AreaInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 area." INDEX { ospfv3AreaInfoIndex } ::= { ospfv3AreaInfoTable 1 } Ospfv3AreaInfoEntry ::= SEQUENCE { ospfv3AreaInfoIndex Integer32, ospfv3AreaInfoID IpAddress, ospfv3AreaInfoImportAsExtern INTEGER, ospfv3AreaInfoSPF Integer32, ospfv3AreaInfoABRs Integer32, ospfv3AreaInfoASBRs Integer32, ospfv3AreaInfoLSAS Integer32, ospfv3AreaInfoSummary Integer32, ospfv3AreaInfoStubMetric Integer32, ospfv3AreaInfoAreaTableCounter Integer32, ospfv3AreaInfoAreaLSDBTabletCounter Integer32 } ospfv3AreaInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 area number for which the OSPF info table is related." ::= { ospfv3AreaInfoEntry 1} ospfv3AreaInfoID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the OSPFv3 area." ::= { ospfv3AreaInfoEntry 2} ospfv3AreaInfoImportAsExtern OBJECT-TYPE SYNTAX INTEGER { importExternal(0), importNoExternal(1), importNssa(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 area Import as Extern status." ::= { ospfv3AreaInfoEntry 3} ospfv3AreaInfoSPF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SPF Runs" ::= { ospfv3AreaInfoEntry 4} ospfv3AreaInfoABRs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Reachable ABRs" ::= { ospfv3AreaInfoEntry 5} ospfv3AreaInfoASBRs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Reachable ASBRs" ::= { ospfv3AreaInfoEntry 6} ospfv3AreaInfoLSAS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Area Scope LSAs." ::= { ospfv3AreaInfoEntry 7} ospfv3AreaInfoSummary OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Area Summary." ::= { ospfv3AreaInfoEntry 8} ospfv3AreaInfoStubMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stub Metric." ::= { ospfv3AreaInfoEntry 9} ospfv3AreaInfoAreaTableCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Area Table counter ." ::= { ospfv3AreaInfoEntry 10} ospfv3AreaInfoAreaLSDBTabletCounter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Area Table counter ." ::= { ospfv3AreaInfoEntry 11} ospfv3IfInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3IfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Interface information." ::= { ospfv3info 3 } ospfv3IfInfoEntry OBJECT-TYPE SYNTAX Ospfv3IfInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 Interface." INDEX { ospfv3IfInfoIndex } ::= { ospfv3IfInfoTable 1 } Ospfv3IfInfoEntry ::= SEQUENCE { ospfv3IfInfoIndex Integer32, ospfv3IfInfoVlan Integer32, ospfv3IfInfoAreaID IpAddress, ospfv3IfInfoAdminStat INTEGER, ospfv3IfInfoPrio Integer32, ospfv3IfInfoTransitDelay Integer32, ospfv3IfInfoRetransInterval Integer32, ospfv3IfInfoRtrDeadInterval Integer32, ospfv3IfInfoHelloInterval Integer32, ospfv3IfInfoPollInterval Integer32, ospfv3IfInfoCost Integer32, ospfv3IfInfoDrid IpAddress, ospfv3IfInfoBdrid IpAddress, ospfv3IfInfoIfState INTEGER } ospfv3IfInfoIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface number for which the OSPF info table is related." ::= { ospfv3IfInfoEntry 1} ospfv3IfInfoVlan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface VLAN for which the OSPF info table is related." ::= { ospfv3IfInfoEntry 2} ospfv3IfInfoAreaID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the OSPFv3 info ." ::= { ospfv3IfInfoEntry 3} ospfv3IfInfoAdminStat OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Info admin state." ::= { ospfv3IfInfoEntry 4} ospfv3IfInfoPrio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface priority." ::= { ospfv3IfInfoEntry 5} ospfv3IfInfoTransitDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface transit delay ." ::= { ospfv3IfInfoEntry 6} ospfv3IfInfoRetransInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface retransit interval." ::= { ospfv3IfInfoEntry 7} ospfv3IfInfoRtrDeadInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface dead interval ." ::= { ospfv3IfInfoEntry 8} ospfv3IfInfoHelloInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface hello interval." ::= { ospfv3IfInfoEntry 9} ospfv3IfInfoPollInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface poll interval ." ::= { ospfv3IfInfoEntry 10} ospfv3IfInfoCost OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface cost." ::= { ospfv3IfInfoEntry 11} ospfv3IfInfoDrid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface cost." ::= { ospfv3IfInfoEntry 12} ospfv3IfInfoBdrid OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 interface cost." ::= { ospfv3IfInfoEntry 13} ospfv3IfInfoIfState OBJECT-TYPE SYNTAX INTEGER { unkn(0), down(1), lpbk(2), wtng(3), ppp (4), dr (5), bdr(6), other(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Info interface state." ::= { ospfv3IfInfoEntry 14} -- OSPFv3 Interface/Nbr Info Table ospfv3IfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF Ospfv3IfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of OSPFv3 Interface Neighbour information." ::= { ospfv3info 4 } ospfv3IfNbrEntry OBJECT-TYPE SYNTAX Ospfv3IfNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a OSPFv3 interface, neighbour pair." INDEX { ospfv3IfNbrVlanID, ospfv3IfNbrIpAddr } ::= { ospfv3IfNbrTable 1 } Ospfv3IfNbrEntry ::= SEQUENCE { ospfv3IfNbrVlanID Integer32, ospfv3IfNbrIpAddr IpAddress, ospfv3IfNbrAddr DisplayString, ospfv3IfNbrAreaID IpAddress, ospfv3IfNbrIntfIndex Integer32, ospfv3IfNbrOption Integer32, ospfv3IfNbrPriority Integer32, ospfv3IfNbrState INTEGER, ospfv3IfNbrNo Integer32 } ospfv3IfNbrVlanID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VlanID to which the OSPFv3 neighbour is associated." ::= { ospfv3IfNbrEntry 1 } ospfv3IfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Neighbour ID ." ::= { ospfv3IfNbrEntry 2 } ospfv3IfNbrAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv6 address of the neighbor associated with the local link." ::= { ospfv3IfNbrEntry 3 } ospfv3IfNbrAreaID OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The area ID of the OSPFv3 neighbour." ::= { ospfv3IfNbrEntry 4 } ospfv3IfNbrIntfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPFv3 Interface number for which this Interface/Nbr table is related." ::= { ospfv3IfNbrEntry 5} ospfv3IfNbrOption OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask corresponding to the neighbor's options field." ::= { ospfv3IfNbrEntry 6 } ospfv3IfNbrPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The priority of the OSPFv3 neighbour." ::= { ospfv3IfNbrEntry 7 } ospfv3IfNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoway(4), exStart(5), exchange(6), loading(7), full(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the OSPFv3 neighbour." ::= { ospfv3IfNbrEntry 8 } ospfv3IfNbrNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of OSPFv3 Neighbour." ::= { ospfv3IfNbrEntry 9 } -- HA Informations haServiceInfo OBJECT IDENTIFIER ::= { haInfo 1 } haServiceInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Service informations." ::= { haServiceInfo 1 } haServiceInfoEntry OBJECT-TYPE SYNTAX HaServiceInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular HA Service." INDEX { haServiceInfoIndex } ::= { haServiceInfoTable 1 } HaServiceInfoEntry ::= SEQUENCE { haServiceInfoIndex DisplayString, haServiceInfoState INTEGER, haGroupInfoState DisplayString } haServiceInfoIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service index in alphanumeric." ::= { haServiceInfoEntry 1 } haServiceInfoState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable HA service group." ::= { haServiceInfoEntry 2 } haGroupInfoState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The HA service group state Init/Backup/Master/Holdoff." ::= { haServiceInfoEntry 3 } -- HA Switch Info haSwitchInfo OBJECT IDENTIFIER ::= { haInfo 2 } haSwitchInfoState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The HA switch state Init/Backup/Master/Holdoff." ::= { haSwitchInfo 1 } -- HA command menu haCurCfgMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), vrrp(2), switch(3), service(4), extendedHA(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The high availability mode." ::= { haCfg 1 } haNewCfgMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), vrrp(2), switch(3), service(4), extendedHA(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The high availability mode." ::= { haCfg 2 } haCurCfgHoldoffTime OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The holdoff time." ::= { haCfg 3 } haNewCfgHoldoffTime OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The holdoff time." ::= { haCfg 4 } -- HA Switch menu haSwitch OBJECT IDENTIFIER ::= { haCfg 5 } haSwitchCurCfgPref OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The preferred initial state." ::= { haSwitch 1 } haSwitchNewCfgPref OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The preferred initial state." ::= { haSwitch 2 } haSwitchCurCfgFailBackMode OBJECT-TYPE SYNTAX INTEGER { onfailure(1), always(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The fail back mode." ::= { haSwitch 3 } haSwitchNewCfgFailBackMode OBJECT-TYPE SYNTAX INTEGER { onfailure(1), always(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The fail back mode." ::= { haSwitch 4 } haSwitchCurCfgAdvIfsMapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The advertisement interfaces present in the out map list. The advertisement interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Ifmap 9 || || || ||___ Ifmap 8 || |____ Ifmap 7 || . . . ||_________ Ifmap 2 |__________ Ifmap 1 where x : 1 - The represented advertisement interface map is selected 0 - The represented advertisement interface map is not selected" ::= { haSwitch 5 } haSwitchNewCfgAdvIfsMapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The advertisement interfaces present in the out map list. The advertisement interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Ifmap 9 || || || ||___ Ifmap 8 || |____ Ifmap 7 || . . . ||_________ Ifmap 2 |__________ Ifmap 1 where x : 1 - The represented advertisement interfaces map is selected 0 - The represented advertisement interfaces map is not selected" ::= { haSwitch 6 } haSwitchNewCfgAddIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Add interface for HA communication between the devices." ::= { haSwitch 7 } haSwitchNewCfgRemIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Remove interface for HA communication between the devices." ::= { haSwitch 8 } haSwitchCurCfgAdver OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The advertisement Interval." ::= { haSwitch 9 } haSwitchNewCfgAdver OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The advertisement Interval." ::= { haSwitch 10 } haSwitchCurCfgOrder OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The failover order group." ::= { haSwitch 12 } haSwitchNewCfgOrder OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The failover order group." ::= { haSwitch 13 } -- HA Trigger menu haTrigger OBJECT IDENTIFIER ::= { haSwitch 11 } haSwitchCurCfgTriggerl4Reals OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking L4 real servers." ::= { haTrigger 1 } haSwitchNewCfgTriggerl4Reals OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable tracking L4 real servers." ::= { haTrigger 2 } -- HA Trigger Ifs menu haTriggerIfs OBJECT IDENTIFIER ::= { haTrigger 3 } haSwitchNewCfgTrigIfTrackAdd OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Add interface to tracking list." ::= { haTriggerIfs 1 } haSwitchNewCfgTrigIfTrackExclude OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Exclude interface from tracking list." ::= { haTriggerIfs 2 } haSwitchCurCfgTrackIfsMapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The tracking interfaces present in the out map list. The tracking interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Ifmap 9 || || || ||___ Ifmap 8 || |____ Ifmap 7 || . . . ||_________ Ifmap 2 |__________ Ifmap 1 where x : 1 - The represented tracking interfaces map is selected 0 - The represented tracking interfaces map is not selected" ::= { haTriggerIfs 3 } haSwitchNewCfgTrackIfsMapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The tracking interfaces present in the out map list. The tracking interfaces maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Ifmap 9 || || || ||___ Ifmap 8 || |____ Ifmap 7 || . . . ||_________ Ifmap 2 |__________ Ifmap 1 where x : 1 - The represented tracking interface map is selected 0 - The represented tracking interface map is not selected" ::= { haTriggerIfs 4 } -- HA Gateway track menu haGwTrack OBJECT IDENTIFIER ::= { haTrigger 4 } haSwitchCurCfgTrigGwTrackState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable gateway tracking." ::= { haGwTrack 1 } haSwitchNewCfgTrigGwTrackState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable gateway tracking." ::= { haGwTrack 2 } haSwitchNewCfgTrigGwTrackAdd OBJECT-TYPE SYNTAX INTEGER (1..259) MAX-ACCESS read-write STATUS current DESCRIPTION "Add gateway to tracking list." ::= { haGwTrack 3 } haSwitchNewCfgTrigGwTrackExclude OBJECT-TYPE SYNTAX INTEGER (1..259) MAX-ACCESS read-write STATUS current DESCRIPTION "Exclude gateway to tracking list." ::= { haGwTrack 4 } haSwitchCurCfgTrackGwsMapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The tracking gateways present in the out map list. The tracking gateways maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Gwmap 9 || || || ||___ Gwmap 8 || |____ Gwmap 7 || . . . ||_________ Gwmap 2 |__________ Gwmap 1 where x : 1 - The represented tracking gateways is selected 0 - The represented tracking gateways map is not selected" ::= { haGwTrack 5 } haSwitchNewCfgTrackGwsMapList OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The tracking gateways present in the out map list. The tracking gateways maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ Gwmap 9 || || || ||___ Gwmap 8 || |____ Gwmap 7 || . . . ||_________ Gwmap 2 |__________ Gwmap 1 where x : 1 - The represented tracking gateways map is selected 0 - The represented tracking gateways map is not selected" ::= { haGwTrack 6 } -- HA Switch Real track menu haTriggerReals OBJECT IDENTIFIER ::= { haTrigger 5 } haSwitchCurCfgTriggerNewl4Reals OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable real server tracking." ::= { haTriggerReals 1 } haSwitchNewCfgTriggerNewl4Reals OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable real server tracking." ::= { haTriggerReals 2 } haSwitchCurCfgTriggerAllReml4Reals OBJECT-TYPE SYNTAX INTEGER { aadd(1), arem(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "aadd - to add all the real servers to tracking. arem - to remove all the real servers from tracking." ::= { haTriggerReals 3 } haSwitchNewCfgTriggerAllReml4Reals OBJECT-TYPE SYNTAX INTEGER { aadd(1), arem(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "aadd - to add all the real servers to tracking. arem - to remove all the real servers from tracking." ::= { haTriggerReals 4 } haSwitchCurCfgTriggerListl4Reals OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group" ::= { haTriggerReals 5 } haSwitchNewCfgTriggerListl4Reals OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "The Real servers in the group. The servers are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | || |_ server 9 | || | ||___ server 8 | |____ server 7 | . . . |__________ server 1 where x : 1 - The represented server belongs to the group 0 - The represented server does not belong to the group" ::= { haTriggerReals 6 } haSwitchNewCfgTriggerAddl4Reals OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The real server to be added to the group. When read, 0 is returned." ::= { haTriggerReals 7 } haSwitchNewCfgTriggerRemovel4Reals OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The real server to be removed from the group. When read, 0 is returned." ::= { haTriggerReals 8 } -- Real association to the switch HA Group haSwitchRealTrkTable OBJECT-TYPE SYNTAX SEQUENCE OF HaSwitchRealTrkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Real to HA switch group." ::= { haTrigger 6 } haSwitchRealTrkEntry OBJECT-TYPE SYNTAX HaSwitchRealTrkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a real to HA group." INDEX { haSwitchRealTrkIndex } ::= { haSwitchRealTrkTable 1 } HaSwitchRealTrkEntry ::= SEQUENCE { haSwitchRealTrkIndex DisplayString } haSwitchRealTrkIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Real ID number in alphanumeric." ::= { haSwitchRealTrkEntry 1 } -- HA Floating IP Table haFloatIpCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaFloatIpCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Floating IP configurations." ::= { haCfg 6 } haFloatIpCurCfgEntry OBJECT-TYPE SYNTAX HaFloatIpCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Floating IP configuration." INDEX { haFloatIpCurCfgIndex } ::= { haFloatIpCurCfgTable 1 } HaFloatIpCurCfgEntry ::= SEQUENCE { haFloatIpCurCfgIndex DisplayString, haFloatIpCurCfgIpVer INTEGER, haFloatIpCurCfgIpAddr IpAddress, haFloatIpCurCfgIpv6Addr DisplayString, haFloatIpCurCfgIf INTEGER, haFloatIpCurCfgState INTEGER } haFloatIpCurCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The floating IP number in alphanumeric." ::= { haFloatIpCurCfgEntry 1 } haFloatIpCurCfgIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The floating IP version." ::= { haFloatIpCurCfgEntry 2 } haFloatIpCurCfgIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The floating IP address." ::= { haFloatIpCurCfgEntry 3 } haFloatIpCurCfgIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION " IPV6 address of the floating IP identified by the instance of the haFloatIpCurCfgIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { haFloatIpCurCfgEntry 4 } haFloatIpCurCfgIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "Floating IP interface." ::= { haFloatIpCurCfgEntry 5 } haFloatIpCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable floating IP." ::= { haFloatIpCurCfgEntry 6 } haFloatIpNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaFloatIpNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Floating IP configurations." ::= { haCfg 7 } haFloatIpNewCfgEntry OBJECT-TYPE SYNTAX HaFloatIpNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Floating IP configuration." INDEX { haFloatIpNewCfgIndex } ::= { haFloatIpNewCfgTable 1 } HaFloatIpNewCfgEntry ::= SEQUENCE { haFloatIpNewCfgIndex DisplayString, haFloatIpNewCfgIpVer INTEGER, haFloatIpNewCfgIpAddr IpAddress, haFloatIpNewCfgIpv6Addr DisplayString, haFloatIpNewCfgIf INTEGER, haFloatIpNewCfgDelete INTEGER, haFloatIpNewCfgState INTEGER } haFloatIpNewCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The floating IP number in alphanumeric." ::= { haFloatIpNewCfgEntry 1 } haFloatIpNewCfgIpVer OBJECT-TYPE SYNTAX INTEGER{ ipv4(1), ipv6(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The floating IP version." ::= { haFloatIpNewCfgEntry 2 } haFloatIpNewCfgIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The floating IP address." ::= { haFloatIpNewCfgEntry 3 } haFloatIpNewCfgIpv6Addr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "IPV6 address of the floating IP identified by the instance of the haFloatIpNewCfgIndex. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx " ::= { haFloatIpNewCfgEntry 4 } haFloatIpNewCfgIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Floating IP interface." ::= { haFloatIpNewCfgEntry 5 } haFloatIpNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "By setting the value to delete(2), the entire row is deleted." ::= { haFloatIpNewCfgEntry 6 } haFloatIpNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable floating IP." ::= { haFloatIpNewCfgEntry 7 } -- HA Service menu haService OBJECT IDENTIFIER ::= { haCfg 8 } haServiceCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Service configurations." ::= { haService 1 } haServiceCurCfgEntry OBJECT-TYPE SYNTAX HaServiceCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular HA Service configuration." INDEX { haServiceCurCfgIndex } ::= { haServiceCurCfgTable 1 } HaServiceCurCfgEntry ::= SEQUENCE { haServiceCurCfgIndex DisplayString, haServiceCurCfgPref INTEGER, haServiceCurCfgPref INTEGER, haServiceCurCfgFailBackMode INTEGER, haServiceCurCfgAdver INTEGER, haServiceCurCfgState INTEGER } haServiceCurCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service index in alphanumeric." ::= { haServiceCurCfgEntry 1 } haServiceCurCfgPref OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The preferred initial state." ::= { haServiceCurCfgEntry 2 } haServiceCurCfgFailBackMode OBJECT-TYPE SYNTAX INTEGER { onfailure(1), always(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The fail back mode." ::= { haServiceCurCfgEntry 3 } haServiceCurCfgAdver OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The advertisement Interval." ::= { haServiceCurCfgEntry 4 } haServiceCurCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable/disable HA service group." ::= { haServiceCurCfgEntry 5 } haServiceNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Service configurations." ::= { haService 2 } haServiceNewCfgEntry OBJECT-TYPE SYNTAX HaServiceNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular HA Service configuration." INDEX { haServiceNewCfgIndex } ::= { haServiceNewCfgTable 1 } HaServiceNewCfgEntry ::= SEQUENCE { haServiceNewCfgIndex DisplayString, haServiceNewCfgPref INTEGER, haServiceNewCfgPref INTEGER, haServiceNewCfgFailBackMode INTEGER, haServiceNewCfgAddIf INTEGER, haServiceNewCfgRemIf INTEGER, haServiceNewCfgAddFip DisplayString, haServiceNewCfgRemFip DisplayString, haServiceNewCfgAddVip DisplayString, haServiceNewCfgRemVip DisplayString, haServiceNewCfgAdver INTEGER, haServiceNewCfgDelete INTEGER, haServiceNewCfgState INTEGER } haServiceNewCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceNewCfgEntry 1 } haServiceNewCfgPref OBJECT-TYPE SYNTAX INTEGER { active(1), standby(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The preferred initial state." ::= { haServiceNewCfgEntry 2 } haServiceNewCfgFailBackMode OBJECT-TYPE SYNTAX INTEGER { onfailure(1), always(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The fail back mode." ::= { haServiceNewCfgEntry 3 } haServiceNewCfgAddIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Add interface for HA communication between the devices." ::= { haServiceNewCfgEntry 4 } haServiceNewCfgRemIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Remove interface from HA communication between the devices." ::= { haServiceNewCfgEntry 5 } haServiceNewCfgAddFip OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Add Floating IP to HA group." ::= { haServiceNewCfgEntry 6 } haServiceNewCfgRemFip OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Remove Floating IP from HA group." ::= { haServiceNewCfgEntry 7 } haServiceNewCfgAddVip OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Add VIP to HA group." ::= { haServiceNewCfgEntry 8 } haServiceNewCfgRemVip OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Remove VIP from HA group." ::= { haServiceNewCfgEntry 9 } haServiceNewCfgAdver OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The advertisement Interval." ::= { haServiceNewCfgEntry 10 } haServiceNewCfgDelete OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "By setting the value to delete(2), the entire HA group is deleted." ::= { haServiceNewCfgEntry 11 } haServiceNewCfgState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable HA service group." ::= { haServiceNewCfgEntry 12 } haServiceVipTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceVipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of VIP to HA group." ::= { haService 3 } haServiceVipEntry OBJECT-TYPE SYNTAX HaServiceVipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a VIP to HA group." INDEX { haServiceIndex,haServiceVipIndex } ::= { haServiceVipTable 1 } HaServiceVipEntry ::= SEQUENCE { haServiceIndex DisplayString, haServiceVipIndex DisplayString } haServiceIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceVipEntry 1 } haServiceVipIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The virtual ID number in alphanumeric." ::= { haServiceVipEntry 2 } haServiceFipTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceFipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of FIP to HA group." ::= { haService 4 } haServiceFipEntry OBJECT-TYPE SYNTAX HaServiceFipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a FIP to HA group." INDEX { haServiceFipIndex,haFipIndex } ::= { haServiceFipTable 1 } HaServiceFipEntry ::= SEQUENCE { haServiceFipIndex DisplayString, haFipIndex DisplayString } haServiceFipIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceFipEntry 1 } haFipIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Floating IP ID number in alphanumeric." ::= { haServiceFipEntry 2 } haServiceAdvIfsTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceAdvIfsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of advertisement interface." ::= { haService 5 } haServiceAdvIfsEntry OBJECT-TYPE SYNTAX HaServiceAdvIfsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a advertisement interface." INDEX { haServiceAdvIfIndex,haAdvIfIndex } ::= { haServiceAdvIfsTable 1 } HaServiceAdvIfsEntry ::= SEQUENCE { haServiceAdvIfIndex DisplayString, haAdvIfIndex INTEGER } haServiceAdvIfIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceAdvIfsEntry 1 } haAdvIfIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The advertisement interface number." ::= { haServiceAdvIfsEntry 2 } -- HA Service Trigger menu haServiceTrigger OBJECT IDENTIFIER ::= { haService 6 } haServiceTriggerCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trigger configurations." ::= { haServiceTrigger 1 } haServiceTriggerCurCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular trigger configuration." INDEX { haServiceTriggerCurCfgIndex } ::= { haServiceTriggerCurCfgTable 1 } HaServiceTriggerCurCfgEntry ::= SEQUENCE { haServiceTriggerCurCfgIndex DisplayString, haServiceTriggerCurCfgl4Reals INTEGER } haServiceTriggerCurCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerCurCfgEntry 1 } haServiceTriggerCurCfgl4Reals OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable tracking L4 real servers." ::= { haServiceTriggerCurCfgEntry 2 } haServiceTriggerNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trigger configurations." ::= { haServiceTrigger 2 } haServiceTriggerNewCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular trigger configuration." INDEX { haServiceTriggerNewCfgIndex } ::= { haServiceTriggerNewCfgTable 1 } HaServiceTriggerNewCfgEntry ::= SEQUENCE { haServiceTriggerNewCfgIndex DisplayString, haServiceTriggerNewCfgl4Reals INTEGER } haServiceTriggerNewCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerNewCfgEntry 1 } haServiceTriggerNewCfgl4Reals OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable tracking L4 real servers." ::= { haServiceTriggerNewCfgEntry 2 } -- HA Service Trigger Ifs menu haServiceTriggerIfs OBJECT IDENTIFIER ::= { haServiceTrigger 3 } haServiceTriggerIfsNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerIfsNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of tracking interface configurations." ::= { haServiceTriggerIfs 1 } haServiceTriggerIfsNewCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerIfsNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular tracking interface configuration." INDEX { haServiceTriggerIfsNewCfgIndex } ::= { haServiceTriggerIfsNewCfgTable 1 } HaServiceTriggerIfsNewCfgEntry ::= SEQUENCE { haServiceTriggerIfsNewCfgIndex DisplayString, haServiceNewCfgTrigIfTrackAdd INTEGER, haServiceNewCfgTrigIfTrackExclude INTEGER } haServiceTriggerIfsNewCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerIfsNewCfgEntry 1 } haServiceNewCfgTrigIfTrackAdd OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Add interface to tracking list." ::= { haServiceTriggerIfsNewCfgEntry 2 } haServiceTrackIfsTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTrackIfsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of tracking interface." ::= { haServiceTriggerIfs 2 } haServiceTrackIfsEntry OBJECT-TYPE SYNTAX HaServiceTrackIfsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a tracking interface." INDEX { haServiceTrackIfIndex,haTrackIfIndex } ::= { haServiceTrackIfsTable 1 } HaServiceTrackIfsEntry ::= SEQUENCE { haServiceTrackIfIndex DisplayString, haTrackIfIndex INTEGER } haServiceTrackIfIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTrackIfsEntry 1 } haTrackIfIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "The tracking interface number." ::= { haServiceTrackIfsEntry 2 } -- HA Gateway track menu haServiceGwTrack OBJECT IDENTIFIER ::= { haServiceTrigger 4 } haServiceTriggerGwCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerGwCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gateway tracking configurations." ::= { haServiceGwTrack 1 } haServiceTriggerGwCurCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerGwCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular gateway tracking configuration." INDEX { haServiceTriggerGwCurCfgIndex } ::= { haServiceTriggerGwCurCfgTable 1 } HaServiceTriggerGwCurCfgEntry ::= SEQUENCE { haServiceTriggerGwCurCfgIndex DisplayString, haServiceCurCfgTrigGwTrackState INTEGER } haServiceTriggerGwCurCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerGwCurCfgEntry 1 } haServiceCurCfgTrigGwTrackState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable gateway tracking." ::= { haServiceTriggerGwCurCfgEntry 2 } haServiceTriggerGwNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerGwNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trigger gateway configurations." ::= { haServiceGwTrack 2 } haServiceTriggerGwNewCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerGwNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a trigger gateway configuration." INDEX { haServiceTriggerGwNewCfgIndex } ::= { haServiceTriggerGwNewCfgTable 1 } HaServiceTriggerGwNewCfgEntry ::= SEQUENCE { haServiceTriggerGwNewCfgIndex DisplayString, haServiceNewCfgTrigGwTrackState INTEGER, haServiceNewCfgTrigGwTrackAdd INTEGER, haServiceNewCfgTrigGwTrackExclude INTEGER } haServiceTriggerGwNewCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerGwNewCfgEntry 1 } haServiceNewCfgTrigGwTrackState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable gateway tracking." ::= { haServiceTriggerGwNewCfgEntry 2 } haServiceNewCfgTrigGwTrackAdd OBJECT-TYPE SYNTAX INTEGER (1..259) MAX-ACCESS read-write STATUS current DESCRIPTION "Add gateway to tracking list." ::= { haServiceTriggerGwNewCfgEntry 3 } haServiceNewCfgTrigGwTrackExclude OBJECT-TYPE SYNTAX INTEGER (1..259) MAX-ACCESS read-write STATUS current DESCRIPTION "Exclude gateway to tracking list." ::= { haServiceTriggerGwNewCfgEntry 4 } haServiceNewCfgTrigIfTrackExclude OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Exclude interface from tracking list." ::= { haServiceTriggerIfsNewCfgEntry 3 } haServiceTrackGwsTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTrackGwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of gateway tracking list." ::= { haServiceGwTrack 3 } haServiceTrackGwsEntry OBJECT-TYPE SYNTAX HaServiceTrackGwsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about gateway tracking list." INDEX { haServiceTrackGwIndex,haTrackGwIndex } ::= { haServiceTrackGwsTable 1 } HaServiceTrackGwsEntry ::= SEQUENCE { haServiceTrackGwIndex DisplayString, haTrackGwIndex INTEGER } haServiceTrackGwIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTrackGwsEntry 1 } haTrackGwIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION " Added gateway to tracking list." ::= { haServiceTrackGwsEntry 2 } -- HA Real Tracking haServiceRealTrack OBJECT IDENTIFIER ::= { haServiceTrigger 5 } haServiceTriggerRealCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerRealCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of real tracking configurations." ::= { haServiceRealTrack 1 } haServiceTriggerRealCurCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerRealCurCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular real tracking configuration." INDEX { haServiceTriggerRealCurCfgIndex } ::= { haServiceTriggerRealCurCfgTable 1 } HaServiceTriggerRealCurCfgEntry ::= SEQUENCE { haServiceTriggerRealCurCfgIndex DisplayString, haServiceCurCfgTrigRealTrkState INTEGER, haServiceCurCfgTrigAllRemRealState INTEGER, haServiceCurCfgTrigRealTrkAutoOptState INTEGER } haServiceTriggerRealCurCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerRealCurCfgEntry 1 } haServiceCurCfgTrigRealTrkState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable real tracking." ::= { haServiceTriggerRealCurCfgEntry 2 } haServiceCurCfgTrigAllRemRealState OBJECT-TYPE SYNTAX INTEGER { aadd(1), arem(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "aadd - to add all the real servers to tracking. arem - to remove all the real servers from tracking." ::= { haServiceTriggerRealCurCfgEntry 3 } haServiceCurCfgTrigRealTrkAutoOptState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AutoOpt Flag." ::= { haServiceTriggerRealCurCfgEntry 4 } haServiceTriggerRealNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceTriggerRealNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of trigger real configurations." ::= { haServiceRealTrack 2 } haServiceTriggerRealNewCfgEntry OBJECT-TYPE SYNTAX HaServiceTriggerRealNewCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a trigger real configuration." INDEX { haServiceTriggerRealNewCfgIndex } ::= { haServiceTriggerRealNewCfgTable 1 } HaServiceTriggerRealNewCfgEntry ::= SEQUENCE { haServiceTriggerRealNewCfgIndex DisplayString, haServiceNewCfgTrigRealTrkState INTEGER, haServiceNewCfgTrigAllRemRealState INTEGER, haServiceNewCfgTrigAddReals DisplayString, haServiceNewCfgTrigRemReals DisplayString, haServiceNewCfgTrigRealTrkAutoOptState INTEGER } haServiceTriggerRealNewCfgIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceTriggerRealNewCfgEntry 1 } haServiceNewCfgTrigRealTrkState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable real tracking." ::= { haServiceTriggerRealNewCfgEntry 2 } haServiceNewCfgTrigAllRemRealState OBJECT-TYPE SYNTAX INTEGER { aadd(1), arem(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Select aadd - to add all the real servers to tracking. Select arem - to remove all the real servers from tracking." ::= { haServiceTriggerRealNewCfgEntry 3 } haServiceNewCfgTrigAddReals OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The real server to be added to the group. When read, 0 is returned." ::= { haServiceTriggerRealNewCfgEntry 4 } haServiceNewCfgTrigRemReals OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "The real server to be removed to the group. When read, 0 is returned." ::= { haServiceTriggerRealNewCfgEntry 5 } haServiceNewCfgTrigRealTrkAutoOptState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The AutoOpt Flag." ::= { haServiceTriggerRealNewCfgEntry 6 } -- HA Real association to the HA Group haServiceRealTable OBJECT-TYPE SYNTAX SEQUENCE OF HaServiceRealEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of Real to HA group." ::= { haServiceTrigger 6 } haServiceRealEntry OBJECT-TYPE SYNTAX HaServiceRealEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a Real to HA group." INDEX { haServiceGrpIndex,haServiceRealIndex } ::= { haServiceRealTable 1 } HaServiceRealEntry ::= SEQUENCE { haServiceGrpIndex DisplayString, haServiceRealIndex DisplayString } haServiceGrpIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The service ID number in alphanumeric." ::= { haServiceRealEntry 1 } haServiceRealIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Real ID number in alphanumeric." ::= { haServiceRealEntry 2 } -- HA Trunk/LACP up criteria haTrunk OBJECT IDENTIFIER ::= { haCfg 9 } haTrunkTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in HA trunk table." ::= { haTrunk 100 } -- I am sorry!! haTrunkCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaTrunkCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Trunk UP criteria configuration." ::= { haTrunk 2 } haTrunkCurCfgTableEntry OBJECT-TYPE SYNTAX HaTrunkCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the HA Trunk UP criteria configuration table." INDEX { haTrunkCurCfgIndex } ::= { haTrunkCurCfgTable 1 } HaTrunkCurCfgTableEntry ::= SEQUENCE { haTrunkCurCfgIndex Integer32, haTrunkCurCfgTrunkUpCriteria DisplayString } haTrunkCurCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Trunk id." ::= { haTrunkCurCfgTableEntry 1 } haTrunkCurCfgTrunkUpCriteria OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of port up criteria for the trunk." ::= { haTrunkCurCfgTableEntry 2 } haTrunkNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaTrunkNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Trunk UP criteria configuration." ::= { haTrunk 3 } haTrunkNewCfgTableEntry OBJECT-TYPE SYNTAX HaTrunkNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the HA Trunk UP criteria configuration table." INDEX { haTrunkNewCfgIndex } ::= { haTrunkNewCfgTable 1 } HaTrunkNewCfgTableEntry ::= SEQUENCE { haTrunkNewCfgIndex Integer32, haTrunkNewCfgTrunkUpCriteria DisplayString, haTrunkNewCfgTrunkRemove INTEGER } haTrunkNewCfgIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Trunk id." ::= { haTrunkNewCfgTableEntry 1 } haTrunkNewCfgTrunkUpCriteria OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of port up criteria for the trunk." ::= { haTrunkNewCfgTableEntry 2 } haTrunkNewCfgTrunkRemove OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Remove the minimum number of port up criteria for the trunk." ::= { haTrunkNewCfgTableEntry 3 } haLacp OBJECT IDENTIFIER ::= { haCfg 10 } haLacpTableMaxSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries in the HA LACP adminkey configuration table. Note:This mib is not supported for VX instance of virtualization" ::= { haLacp 101 } -- I am so sorry!! haLacpMaxAdminKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum possible LACP admin key value. Note:This mib is not supported for VX instance of virtualization" ::= { haLacp 102 } -- I am so so sorry!! haLacpCurCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaLacpCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Lacp UP criteria configuration. Note:This mib is not supported for VX instance of virtualization" ::= { haLacp 3 } haLacpCurCfgTableEntry OBJECT-TYPE SYNTAX HaLacpCurCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the HA Lacp UP criteria configuration table." INDEX { haLacpCurCfgAdminKey } ::= { haLacpCurCfgTable 1 } HaLacpCurCfgTableEntry ::= SEQUENCE { haLacpCurCfgAdminKey Integer32, haLacpCurCfgLacpUpCriteria DisplayString } haLacpCurCfgAdminKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Lacp Admin key id." ::= { haLacpCurCfgTableEntry 1 } haLacpCurCfgLacpUpCriteria OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum number of port up criteria for the LACP admin key." ::= { haLacpCurCfgTableEntry 2 } haLacpNewCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HaLacpNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of HA Lacp UP criteria configuration. Note:This mib is not supported for VX instance of virtualization" ::= { haLacp 4 } haLacpNewCfgTableEntry OBJECT-TYPE SYNTAX HaLacpNewCfgTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the HA Lacp UP criteria configuration table." INDEX { haLacpNewCfgAdminKey } ::= { haLacpNewCfgTable 1 } HaLacpNewCfgTableEntry ::= SEQUENCE { haLacpNewCfgAdminKey Integer32, haLacpNewCfgLacpUpCriteria DisplayString, haLacpNewCfgLacpRemove INTEGER } haLacpNewCfgAdminKey OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Lacp Admin key id." ::= { haLacpNewCfgTableEntry 1 } haLacpNewCfgLacpUpCriteria OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of port up criteria for the LACP admin key." ::= { haLacpNewCfgTableEntry 2 } haLacpNewCfgLacpRemove OBJECT-TYPE SYNTAX INTEGER { other(1), delete(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Remove the minimum number of port up criteria for the LACP admin key." ::= { haLacpNewCfgTableEntry 3 } haCurLPWizardCfgMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), vrrp(2), switch(3), service(4), extendedHA(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Change the High Availability Mode from the LP startup wizard. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 11 } haNewLPWizardCfgMode OBJECT-TYPE SYNTAX INTEGER { disabled(1), vrrp(2), switch(3), service(4), extendedHA(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Change the High Availability Mode from the LP startup wizard. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 12 } haCurCfgHAID OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The HA ID for standalone device." ::= { haCfg 13 } haNewCfgHAID OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The HA ID for standalone device. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 14 } haCurCfgBkpVipRt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable adding vip routes in backup device. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 15 } haNewCfgBkpVipRt OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable adding vip routes in backup device. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 16 } haCurCfgFmac OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or Disable floating mac." ::= { haCfg 17 } haNewCfgFmac OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable floating mac." ::= { haCfg 18 } haCurCfgNwClGarp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enable or disable sending GARP for all the proxy IPs in the network class range. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 19 } haNewCfgNwClGarp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable sending GARP for all the proxy IPs in the network class range. Note:This mib is not supported for VX instance of virtualization" ::= { haCfg 20 } haCurCfgFailoverTime OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The Failover delay time." ::= { haCfg 21 } haNewCfgFailoverTime OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Failover delay time." ::= { haCfg 22 } -- BFD MIBS START bfdCurCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "BFD global state. Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 1 } bfdNewCfgState OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Globally turn BFD on or off. Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 2 } bfdCurCfgRxInterval OBJECT-TYPE SYNTAX INTEGER (100..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "BFD control packets Rx interval (in milliseconds). Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 3 } bfdNewCfgRxInterval OBJECT-TYPE SYNTAX INTEGER (100..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "BFD control packets Rx interval (in milliseconds). Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 4 } bfdCurCfgMultiplier OBJECT-TYPE SYNTAX INTEGER(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of retries to declare the BFD neighbour DOWN. Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 5 } bfdNewCfgMultiplier OBJECT-TYPE SYNTAX INTEGER(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of retries to declare the BFD neighbour DOWN. Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 6 } bfdCurCfgIfBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Bitmap of interfaces currently configured for BFD in the device. OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ If 9 || || || ||___ If 8 || |____ If 7 || . . . ||_________ If 2 |__________ If 1 where x : 1 - The represented interface is selected, 0 - The represented interface is not selected Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 7 } bfdNewCfgIfBmap OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Bitmap of interfaces newly configured for BFD in the device i.e in new config (before apply). OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ If 9 || || || ||___ If 8 || |____ If 7 || . . . ||_________ If 2 |__________ If 1 where x : 1 - The represented interface is selected 0 - The represented interface is not selected Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 8 } bfdNewCfgAddIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Add BFD interface. Returns 0 on SNMPGET. Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 9 } bfdNewCfgRemIf OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Remove BFD interface. Returns 0 on SNMPGET. Note:This mib is not supported for VX instance of virtualization" ::= { bfdCfg 10 } -- BFD MIBS END -- L3 Operational commands vrrpOperVirtRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpOperVirtRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of virtual routers. Note:This mib is not supported for VX instance of virtualization" ::= { vrrpOper 1 } vrrpOperVirtRtrEntry OBJECT-TYPE SYNTAX VrrpOperVirtRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the vrrpOperVirtRtrTable " INDEX { vrrpOperVirtRtrIndex } ::= { vrrpOperVirtRtrTable 1 } VrrpOperVirtRtrEntry ::= SEQUENCE { vrrpOperVirtRtrIndex Integer32, vrrpOperVirtRtrBackup INTEGER } vrrpOperVirtRtrIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index for the VRRP virtual router." ::= { vrrpOperVirtRtrEntry 1 } vrrpOperVirtRtrBackup OBJECT-TYPE SYNTAX INTEGER { ok(1), backup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object is read." ::= { vrrpOperVirtRtrEntry 2 } vrrpOperVirtRtrGroupBackup OBJECT-TYPE SYNTAX INTEGER { ok(1), backup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object is read." ::= { vrrpOper 2 } bgpOper OBJECT IDENTIFIER ::= { ipOper 1 } garpOper OBJECT IDENTIFIER ::= { ipOper 2 } bgpOperStart OBJECT IDENTIFIER ::= { bgpOper 1 } bgpOperStop OBJECT IDENTIFIER ::= { bgpOper 2 } bgpOperStartPeerNum OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Enter BGP peer Number.Value 1 is returned when object is read. Note:This mib is not supported for VX instance of virtualization" ::= { bgpOperStart 1 } bgpOperStartSess OBJECT-TYPE SYNTAX INTEGER { ok(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the action object,start(2) is to Start BGP peer session. ok(1) is returned when object is read Note:This mib is not supported for VX instance of virtualization" ::= { bgpOperStart 2 } bgpOperStopPeerNum OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Enter BGP peer Number.Value 1 is returned when object is read. Note:This mib is not supported for VX instance of virtualization" ::= { bgpOperStop 1 } bgpOperStopSess OBJECT-TYPE SYNTAX INTEGER { ok(1), stop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object,stop(2) is to Stop BGP peer session. ok(1) is returned when object is read This mib is not supported for VX instance of virtualization" ::= { bgpOperStop 2 } garpOperIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Ip Address to Send gratuitous arp.Value 0.0.0.0 is returned when object is read. Note:This mib is not supported for VX instance of virtualization" ::= { garpOper 1 } garpOperVlanNumber OBJECT-TYPE SYNTAX INTEGER (1..4090) MAX-ACCESS read-write STATUS current DESCRIPTION "Vlan Number to Send gratuitous arp.Value 1 is returned when object is read. Note:This mib is not supported for VX instance of virtualization" ::= { garpOper 2 } garpOperSend OBJECT-TYPE SYNTAX INTEGER { ok(1), send(2), error(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is an action object,When set to value of send(2), it sends gratuitous arp.ok(1) is returned when garp request is sent successfully.Otherwise error(3) is returned. Note:This mib is not supported for VX instance of virtualization" ::= { garpOper 3 } haOperServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF HaOperServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of HA group. This mib is not supported for VX instance of virtualization" ::= { haOper 1 } haOperServiceEntry OBJECT-TYPE SYNTAX HaOperServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the haOperServiceTable." INDEX { haOperServiceIndex } ::= { haOperServiceTable 1 } HaOperServiceEntry ::= SEQUENCE { haOperServiceIndex DisplayString, haOperServiceBackup INTEGER } haOperServiceIndex OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The index for the ha service group in alphanumeric." ::= { haOperServiceEntry 1 } haOperServiceBackup OBJECT-TYPE SYNTAX INTEGER { ok(1), backup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to a value of 'backup(2)' it forces the specified HA service group master into backup mode. 'ok(1)' is returned when the object is read." ::= { haOperServiceEntry 2 } haOperSwitchBackup OBJECT-TYPE SYNTAX INTEGER { ok(1), backup(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to a value of 'backup(2)' it forces the specified HA switch master into backup mode. 'ok(1)' is returned when the object is read." ::= { haOper 2 } END