RAD-PDH-MIB DEFINITIONS ::= BEGIN -- It is RAD's intent to encourage the widespread use of -- this Specification in connection with the management of -- RAD products. RAD grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of RAD products. -- This Specification is supplied "as is," and RAD makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. IMPORTS Integer32, Counter32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, Counter64 FROM SNMPv2-SMI diverseIfWanGen FROM RAD-SMI-MIB; pdhInterface MODULE-IDENTITY LAST-UPDATED "201502191807Z" -- February 19, 2015 ORGANIZATION "RAD Data Communications Ltd." CONTACT-INFO "System Department Email: mibs@rad.com Postal: RAD Data Communications Ltd. 24 Raoul Wallenberg St. Tel-Aviv 6971920 Israel Phone: +972-3-645-5421 Fax: +972-3-760-7844" DESCRIPTION "PDH MIB." ::= { diverseIfWanGen 16 } pdhIfConfig OBJECT IDENTIFIER ::= { pdhInterface 1 } -- Node for configuration pdhIfStatus OBJECT IDENTIFIER ::= { pdhInterface 2 } -- Node for status pdhIfStatis OBJECT IDENTIFIER ::= { pdhInterface 3 } -- Node for statistics -- C O N F I G U R A T I O N -- PDH (Plesiochronous Digital Hierarchy) logical port/interface configuration pdhLogPrtConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF PdhLogPrtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration for PDH (Plesiochronous Digital Hierarchy) Logical ports/interfaces. For example: GFP (Generic Framing Procedure) logical interface or VCG (Virtual Concatenation Group) logical interface." ::= { pdhIfConfig 1 } pdhLogPrtConfigEntry OBJECT-TYPE SYNTAX PdhLogPrtConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in Configuration Table for PDH Logical Ports." INDEX {pdhLogPrtCnfgIdx,pdhLogPrtIndex} ::= { pdhLogPrtConfigTable 1 } PdhLogPrtConfigEntry ::= SEQUENCE { pdhLogPrtCnfgIdx Integer32, pdhLogPrtIndex Unsigned32, pdhLogPrtMaxDiffDelay Unsigned32 } -- Note: for the parameter Payload FCS, see radgen.txt: gfpPayloadFcs (gfpCnfgTable) pdhLogPrtCnfgIdx OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the Index of the Configuration being accessed. Index of 255 relates to the Temporary/Edit (Scratch) Configuration. For products that support several configurations, Set can be performed only to the Temporary Config (=255). For products that don't support Temporary/Edit (Scratch) configuration, this index will be 1." ::= { pdhLogPrtConfigEntry 1} pdhLogPrtIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the number or ifIndex of the selected logical port." ::= { pdhLogPrtConfigEntry 2 } pdhLogPrtMaxDiffDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum Differential Delay. Largest allowed difference in msec. between delays in two links (E1/T1) that are members of the selected VCG. This object is relevant for VCG (Virtual Concatenation Group) only." ::= { pdhLogPrtConfigEntry 3 } -- S T A T U S -- PDH (Plesiochronous Digital Hierarchy) Logical Port Status pdhLogPrtStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PdhLogPrtStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status of PDH logical port" ::= { pdhIfStatus 1 } pdhLogPrtStatusEntry OBJECT-TYPE SYNTAX PdhLogPrtStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the PDH Logical Port Status Table" INDEX { pdhLogPrtStatusIndex } ::= { pdhLogPrtStatusTable 1 } PdhLogPrtStatusEntry ::= SEQUENCE { pdhLogPrtStatusIndex Unsigned32, pdhLogPrtFrameDelineation INTEGER, pdhLogPrtDiffDelay Unsigned32 } pdhLogPrtStatusIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the number or ifIndex of the selected logical port." ::= { pdhLogPrtStatusEntry 1 } pdhLogPrtFrameDelineation OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), notDelineated (2), delineated (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is relevant for GFP (Generic Framing Procedure) only. It indicates the GFP Frame delineation status. Frame delineation means that the device has found the start of a frame - the protocol is synchronized" ::= { pdhLogPrtStatusEntry 2 } pdhLogPrtDiffDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Differential Delay. This object indicates the largest detected difference in msec. between delays in two links (E1/T1) that are members of the selected VCG." ::= { pdhLogPrtStatusEntry 3 } -- VCG LCAS (Link Capacity Adjustment Scheme) Members Status table vcgLcasMembersStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VcgLcasMembersStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status for LCAS (Link Capacity Adjustment Scheme) members (links) of VCG logical port." ::= { pdhIfStatus 2 } vcgLcasMembersStatusEntry OBJECT-TYPE SYNTAX VcgLcasMembersStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in LCAS (Link Capacity Adjustment Scheme) links status table for VCG (Virtual Concatenation Group) logical port." INDEX { vcgLcasMembersVcgIndex, vcgLcasMembersLinkIndex } ::= { vcgLcasMembersStatusTable 1 } VcgLcasMembersStatusEntry ::= SEQUENCE { vcgLcasMembersVcgIndex Unsigned32, vcgLcasMembersLinkIndex Unsigned32, vcgLcasMembersSourceStatus INTEGER, vcgLcasMembersSinkStatus INTEGER, vcgLcasMembersLoopStatus INTEGER, vcgLcasMembersTxStateMachineStatus INTEGER, vcgLcasMembersRxStateMachineStatus INTEGER, vcgLcasMembersStatus INTEGER, vcgLcasMembersSignalUnavailable INTEGER, vcgLcasMembersTrailSignalDegrade INTEGER, vcgLcasMembersMfiDiffDelay Unsigned32, vcgLcasMembersVcLoMF INTEGER, vcgLcasMembersTxSeqNumber Unsigned32, vcgLcasMembersRxSeqNumber Unsigned32 } vcgLcasMembersVcgIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the number or ifIndex of the selected VCG (Virtual Concatenation Group) logical port." ::= { vcgLcasMembersStatusEntry 1 } vcgLcasMembersLinkIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the number or ifIndex of the PDH link that is a member of the VCG." ::= { vcgLcasMembersStatusEntry 2 } vcgLcasMembersSourceStatus OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), fail (2), ok (3), fixed (4), add (5), norm (6), eos (7), idle (8), trSwitchLoopDetect (9), dnu (10), illegal (11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object summarizes the LCAS status of the source (Tx) side of the link." ::= { vcgLcasMembersStatusEntry 3 } vcgLcasMembersSinkStatus OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), fail (2), ok (3), fixed (4), add (5), norm (6), eos (7), idle (8), trSwitchLoopDetect (9), dnu (10), illegal (11) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object summarizes the LCAS status of the sink (Rx) side of the link." ::= { vcgLcasMembersStatusEntry 4 } vcgLcasMembersLoopStatus OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), noLoop (2), loop (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates loop state." ::= { vcgLcasMembersStatusEntry 5 } vcgLcasMembersTxStateMachineStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), add (2), norm (3), dnu (4), remove (5), illegal (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Tx State Machine Status." ::= { vcgLcasMembersStatusEntry 6 } vcgLcasMembersRxStateMachineStatus OBJECT-TYPE SYNTAX INTEGER { idle (1), fail (2), ok (3), wtrFail (4), wtrOk (5), ho (6), --(High Order Concatenation) remove (7), illegal (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Rx State Machine Status." ::= { vcgLcasMembersStatusEntry 7 } vcgLcasMembersStatus OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), fail (2), ok (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Remote VCG members status (MST)." ::= { vcgLcasMembersStatusEntry 8 } vcgLcasMembersSignalUnavailable OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), no (2), yes (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates member signal unavailable (MSU)." ::= { vcgLcasMembersStatusEntry 9 } vcgLcasMembersTrailSignalDegrade OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), no (2), yes (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Trail Signal Degrade (TSD) ." ::= { vcgLcasMembersStatusEntry 10 } vcgLcasMembersMfiDiffDelay OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates time difference (based on MFI (Multi-Frame Indicator) field of the VCAT header) from the fastest channel (on which it will be 0), in miliSeconds units" ::= { vcgLcasMembersStatusEntry 11 } vcgLcasMembersVcLoMF OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), off (2), -- OK on (3) -- Loss of Multiframe defect } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates Loss Of Multiframe defect. (dLOM)" ::= { vcgLcasMembersStatusEntry 12 } vcgLcasMembersTxSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the LCAS Tx sequence number of this memeber." ::= { vcgLcasMembersStatusEntry 13 } vcgLcasMembersRxSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the LCAS Rx sequence number of this member." ::= { vcgLcasMembersStatusEntry 14 } -- S T A T I S T I C S -- PDH (Plesiochronous Digital Hierarchy) Logical Port Statistics pdhLogPrtStatisTable OBJECT-TYPE SYNTAX SEQUENCE OF PdhLogPrtStatisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Statistics for PDH (Plesiochronous Digital Hierarchy) Logical Port, currently used for GFP (Generic Framing Procedure) interface." ::= { pdhIfStatis 1 } pdhLogPrtStatisEntry OBJECT-TYPE SYNTAX PdhLogPrtStatisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in Statistics Table for PDH (Plesiochronous Digital Hierarchy) Logical Port." INDEX { pdhLogPrtStatisIndex } ::= { pdhLogPrtStatisTable 1 } PdhLogPrtStatisEntry ::= SEQUENCE { pdhLogPrtStatisIndex Unsigned32, pdhLogPrtStatisRxCorrFrames Counter32, pdhLogPrtStatisRxCorrOctets Counter32, pdhLogPrtStatisRxCHecErrors Counter32, pdhLogPrtStatisRxTHecErrors Counter32, pdhLogPrtStatisRxFcsErrors Counter32 } pdhLogPrtStatisIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the number or ifIndex of the selected Interface." ::= { pdhLogPrtStatisEntry 1 } pdhLogPrtStatisRxCorrFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of Correct Frames received." ::= { pdhLogPrtStatisEntry 2 } pdhLogPrtStatisRxCorrOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of Correct Octets received." ::= { pdhLogPrtStatisEntry 3 } pdhLogPrtStatisRxCHecErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of Frames received with errors in the Core header (i.e. cHEC field. cHEC means Core Header Error Correction)." ::= { pdhLogPrtStatisEntry 4 } pdhLogPrtStatisRxTHecErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of Frames received with errors in the Type header (i.e. tHEC field. tHEC means Type Header Error Correction)." ::= { pdhLogPrtStatisEntry 5 } pdhLogPrtStatisRxFcsErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of Frames received with Frame Check Sequence errors." ::= { pdhLogPrtStatisEntry 6 } END