RAD-LAG-MIB DEFINITIONS ::= BEGIN -- It is RAD's intent to encourage the widespread use of -- this Specification in connection with the management of -- RAD products. RAD grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of RAD products. -- This Specification is supplied "as is," and RAD makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. IMPORTS dot3adAggPortEntry FROM IEEE8023-LAG-MIB ifAlias, InterfaceIndexOrZero FROM IF-MIB PortList FROM Q-BRIDGE-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC agnt FROM RAD-SMI-MIB alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason FROM RAD-GEN-MIB; lag MODULE-IDENTITY LAST-UPDATED "201502191802Z" -- February 19, 2015 ORGANIZATION "RAD Data Communications Ltd." CONTACT-INFO "System Department Email: mibs@rad.com Postal: RAD Data Communications Ltd. 24 Raoul Wallenberg St. Tel-Aviv 6971920 Israel Phone: +972-3-645-5421 Fax: +972-3-760-7844" DESCRIPTION "LAG MIB." ::= { agnt 54 } -- LAG definitions lagEvents OBJECT IDENTIFIER ::= {lag 0} -- Notifications lagTable OBJECT-TYPE SYNTAX SEQUENCE OF LagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table defining Link Aggregation Groups port association, and other parameters." ::= {lag 1} lagEntry OBJECT-TYPE SYNTAX LagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LAG table." INDEX { lagCnfgIdx, lagIdx } ::= { lagTable 1 } LagEntry ::= SEQUENCE { lagCnfgIdx Unsigned32, lagIdx Unsigned32, lagPortMembers PortList, lagDistributionMethod INTEGER, lagRecoveryMode INTEGER, lagWaitToRestore Unsigned32, lagRowStatus RowStatus, lagShutDownDurationUponFlip Unsigned32, lagRdnMethod INTEGER, lagLacpEnable INTEGER, lagMinimumLinks Unsigned32, lagAnchorPort InterfaceIndexOrZero } lagCnfgIdx OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg." ::= { lagEntry 1} lagIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates LAG unique index." ::= { lagEntry 2} lagPortMembers OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports which are permanently assigned to the Link Aggregation Group. The default value of this object is a string of zeros." ::= { lagEntry 3} lagDistributionMethod OBJECT-TYPE SYNTAX INTEGER { portBased (2), oneToOne (3), sourceMac (4), destinationMac (5), sourceXorDestinationMac (6), sourceAndDestinationMac (7), sourceIp (8), destinationIp (9), sourceAndDestinationMacAndIp (10), roundRobin (11), sourceAndDestinationIp (12) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the criteria for the 802.3ad (LAG) to split the traffic between ports" ::= { lagEntry 4} lagRecoveryMode OBJECT-TYPE SYNTAX INTEGER { nonRevertive (2), revertive (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines whether traffic will be returned to a port after its recovery. This object is applicable only when lagDistributionMethod= oneToOne (3)." ::= { lagEntry 5} lagWaitToRestore OBJECT-TYPE SYNTAX Unsigned32 (0..720) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines traffic recovery time (in seconds) to the port after its recovery. This object is applicable only when lagRecoveryMode= revertive (3)." ::= { lagEntry 6} lagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object enables user to create/delete entries of this table. Note: When using LAG standard package, this table is static, hence, only the values active(1), notInService(2) are used." ::= { lagEntry 7} lagShutDownDurationUponFlip OBJECT-TYPE SYNTAX Unsigned32 (0..30) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the duration (in seconds) the active port transmission is shut down after LAG Flip occurs. The transmission is shut down and then opened again (after the duration defined by this object), in order to cause the other side to flip to the new active port. 0=no shut-down. This object is applicable only when lagDistributionMethod=oneToOne(3) and mainly when each of the Links of our device is connected to a different device." ::= { lagEntry 8} lagRdnMethod OBJECT-TYPE SYNTAX INTEGER { loadSharing (1), redundancy (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the redundancy method." ::= { lagEntry 9} lagLacpEnable OBJECT-TYPE SYNTAX INTEGER { no (2), yes (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enabling/Disabling the LACP for a LAG. The LACP will be enabled for all ports belonging to this LAG." ::= { lagEntry 10} lagMinimumLinks OBJECT-TYPE SYNTAX Unsigned32 (1..4) MAX-ACCESS read-create STATUS current DESCRIPTION "This object defines the minimum number of active ports in the LAG for it to be considered OK . This object is valid only for Load Sharing LAGs. Default value shall be 1." ::= { lagEntry 12} lagAnchorPort OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates ifIndex of the port selected as Anchor Port." ::= { lagEntry 13} lagStatTable OBJECT-TYPE SYNTAX SEQUENCE OF LagStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table defining Link Aggregation Groups Redundancy. This table is applicable only when lagDistributionMethod = oneToOne." ::= {lag 2} lagStatEntry OBJECT-TYPE SYNTAX LagStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the LAG Status table." INDEX { lagIdx } ::= { lagStatTable 1 } LagStatEntry ::= SEQUENCE { lagStatForcePort Unsigned32, lagStatActivePort Unsigned32 } lagStatForcePort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables user to enforce the active port. 0 = No Enforcement; Otherwise the ifIndex of the port." ::= { lagStatEntry 1} lagStatActivePort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current active port. It is applicable only when lagDistributionMethod = oneToOne. The value is the ifIndex of the port. 0 = none of the ports is active." ::= { lagStatEntry 2} dot3adAggPortXTable OBJECT-TYPE SYNTAX SEQUENCE OF Dot3adAggPortXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An Augment to the Link Aggregation Control configuration table (dot3adAggPortTable in IEEE8023-LAG-MIB; IEEE 802.3ad)." ::= {lag 3} dot3adAggPortXEntry OBJECT-TYPE SYNTAX Dot3adAggPortXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table." AUGMENTS { dot3adAggPortEntry } ::= { dot3adAggPortXTable 1 } Dot3adAggPortXEntry ::= SEQUENCE { dot3adAggPortXprotectionState INTEGER } dot3adAggPortXprotectionState OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), standby (2), active (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the state of the LAG protection." ::= { dot3adAggPortXEntry 1 } -------------------------------------------- -- LAG Common Trap Definitions -------------------------------------------- -- LAG LACP (LINK AGGREGATION CONTROL PROTOCOL) DOWN lagLacpDown NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, ifAlias } STATUS deprecated DESCRIPTION "This trap indicates that Ethernet port is active but LACP is out-of-sync. The first ifAlias that is attached is the Group's ifAlias. The second ifAlias that is attached is the Member's ifAlias. " ::= { lagEvents 1 } -- LAG LACP (LINK AGGREGATION CONTROL PROTOCOL) DETECTION lagLacpLoopDetection NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias } STATUS deprecated DESCRIPTION "This trap indicates that LACP loop was detected between two ports assigned to a LAG. " ::= { lagEvents 2 } -- LAG LACP (LINK AGGREGATION CONTROL PROTOCOL) CHURN lagLacpChurn NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias } STATUS deprecated DESCRIPTION "This trap indicates that the LACP was unable to synchronize with the partner. " ::= { lagEvents 3 } lagSubGroupSwitchover NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias } STATUS current DESCRIPTION "Switchover between sub-groups of inter-card LAG." ::= { lagEvents 4 } lagFailure NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias } STATUS deprecated DESCRIPTION "All LAG member ports are down." ::= { lagEvents 5} lagMinimumMembers NOTIFICATION-TYPE OBJECTS { alarmEventLogSourceName, alarmEventLogAlarmOrEventId, alarmEventLogDescription, alarmEventLogSeverity, alarmEventLogDateAndTime, alarmEventReason, ifAlias, lagMinimumLinks } STATUS deprecated DESCRIPTION "Number of Active Links is below Minumum configured in lagMinimumLinks." ::= { lagEvents 6} END