PEPWAVE-MAX-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, Integer32, 
	Counter32, Counter64, TimeTicks,
	IpAddress, enterprises						FROM SNMPv2-SMI
	TEXTUAL-CONVENTION							FROM SNMPv2-TC
	MODULE-COMPLIANCE, OBJECT-GROUP				FROM SNMPv2-CONF;


pepwaveMAX MODULE-IDENTITY
    LAST-UPDATED "201206060000Z"
    ORGANIZATION "Pepwave"
    CONTACT-INFO
		"Pepwave
		http://www.pepwave.com
		Support: http://www.pepwave.com/contact/support/
		Email: info@pepwave.com		
		"
    DESCRIPTION
            "MIB module for Pepwave MAX."
    REVISION     "201206060000Z"
    DESCRIPTION
		"Initial release."
    ::= { enterprises pepwave(27662) 1 }

-- Local type define ----------------------------------------------------------

TableIndex ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
            "A unique value, greater than zero, for each interface or
            interface sub-layer in the managed system.  It is
            recommended that values are assigned contiguously starting
            from 1.  The value for each interface sub-layer must remain
            constant at least from one re-initialization of the entity's
            network management system to the next re-initialization."
    SYNTAX       Integer32 (1..2147483647)

ConnectionNum ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS       current
    DESCRIPTION
            "A unique value, greater than zero, for each WAN connection
			number."
    SYNTAX       Integer32 (1..2147483647)

NameString ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "80a"
    STATUS       current
    DESCRIPTION
            "MAX name string."
    SYNTAX       OCTET STRING (SIZE (0..80))

PortSpeedType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            "Describe the port speed and type."
    SYNTAX       INTEGER {
                     unknown(0),
                     auto(1),
                     fullDulplex10(2),
                     halfDulplex10(3),
                     fullDulplex100(4),
                     halfDulplex100(5),
                     fullDulplex1000(6),
                     halfDulplex1000(7)
                 }

-- System status --------------------------------------------------------------

maxStatus OBJECT IDENTIFIER ::= { pepwaveMAX 1 }

-- System information

maxSystem OBJECT IDENTIFIER ::= { maxStatus 1 }

maxFirmware OBJECT-TYPE
    SYNTAX		NameString
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX firmware version."
    ::= { maxSystem 1 }

maxSerialNumber OBJECT-TYPE
    SYNTAX		NameString
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX serial number."
    ::= { maxSystem 2 }

maxTime OBJECT-TYPE
    SYNTAX		NameString
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX system time."
    ::= { maxSystem 3 }

maxUpTime OBJECT-TYPE
    SYNTAX		TimeTicks
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX up time (in hundredths of a second) since the 
				system was last re-initialized."
    ::= { maxSystem 4 }

maxLan OBJECT IDENTIFIER ::= { maxSystem 6 }

maxLanStatus OBJECT-TYPE
    SYNTAX		NameString
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX LAN status (up/down)."
    ::= { maxLan 1 }

maxLanIp OBJECT-TYPE
    SYNTAX		IpAddress
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX LAN IP address."
    ::= { maxLan 2 }

maxLanSubnetMask OBJECT-TYPE
    SYNTAX		IpAddress
    MAX-ACCESS	read-only
    STATUS		current
    DESCRIPTION	"MAX LAN sub-net mask."
    ::= { maxLan 3 }

-- Link status of virtual WAN

maxLinkStatus OBJECT IDENTIFIER ::= { maxStatus 2 }

maxLinkNumber OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION	"The number of network interfaces (regardless of their
				current state) present on this system."
    ::= { maxLinkStatus 1 }

linkTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF LinkStatusEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"A list of link status."
	::= { maxLinkStatus 2 }

linkEntry OBJECT-TYPE
	SYNTAX		LinkStatusEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"An entry containing management information applicable to a
				particular interface."
	INDEX   { linkConnNum }
	::= { linkTable 1 }

LinkStatusEntry ::=
	SEQUENCE {
		linkConnNum					ConnectionNum,
		linkName					NameString,
		linkStatus					NameString,
		linkThroughputIn			Counter32,
		linkThroughputOut			Counter32,
		linkDataTransferred			Counter64
	}

linkConnNum OBJECT-TYPE
	SYNTAX		ConnectionNum
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Virtual WAN index number (1-based, unique)."
	::= { linkEntry 1 }

linkName OBJECT-TYPE
	SYNTAX		NameString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"MAX link status (connecting/connected/link down)."
	::= { linkEntry 2 }

linkStatus OBJECT-TYPE
	SYNTAX		NameString
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"MAX link status (connecting/connected/link down)."
	::= { linkEntry 3 }

linkThroughputIn OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of inbound packets which were chosen to be
				discarded even though no errors had been detected to prevent
				their being deliverable to a higher-layer protocol.  One
				possible reason for discarding such a packet could be to
				free up buffer space.
				
				Discontinuities in the value of this counter can occur at
				re-initialization of the management system, and at other
				times as indicated by the value of
				maxWanCounterDiscontinuityTime."
	::= { linkEntry 4 }

linkThroughputOut OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of outbound packets which were chosen to be
				discarded even though no errors had been detected to prevent
				their being transmitted.  One possible reason for discarding
				such a packet could be to free up buffer space.
				
				Discontinuities in the value of this counter can occur at
				re-initialization of the management system, and at other
				times as indicated by the value of
				maxWanCounterDiscontinuityTime."
	::= { linkEntry 5 }

linkDataTransferred OBJECT-TYPE
	SYNTAX		Counter64
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The numbe of bytes transferred through."
	::= { linkEntry 6 }

-- Link IP address of virtual WAN

linkIpTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF LinkIpEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"A list of link status."
	::= { maxLinkStatus 3 }

linkIpEntry OBJECT-TYPE
	SYNTAX		LinkIpEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"An entry containing management information applicable to a
				particular interface."
	INDEX   { linkIpConnNum, linkIpIndex }
	::= { linkIpTable 1 }

LinkIpEntry ::=
	SEQUENCE {
		linkIpConnNum				ConnectionNum,
		linkIpIndex					TableIndex,
		linkIp						IpAddress
	}

linkIpConnNum OBJECT-TYPE
	SYNTAX		ConnectionNum
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Virtual WAN index number."
	::= { linkIpEntry 1 }

linkIpIndex OBJECT-TYPE
	SYNTAX		TableIndex
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Virtual WAN index number."
	::= { linkIpEntry 2 }

linkIp OBJECT-TYPE
	SYNTAX		IpAddress
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"MAX link IP address list."
	::= { linkIpEntry 3 }

-- Physical WAN port usage

wanUsageTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF WanUsageEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"A list of interface entries."
	::= { maxStatus 3 }

wanUsageEntry OBJECT-TYPE
	SYNTAX		WanUsageEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"An entry containing management information applicable to a
				particular interface."
	INDEX   { wanUsageIndex }
	::= { wanUsageTable 1 }

WanUsageEntry ::=
	SEQUENCE {
		wanUsageIndex				TableIndex,
		wanUsageThroughputIn		Counter32,
		wanUsageThroughputOut		Counter32,
		wanUsageDataTransferred		Counter64
	}

wanUsageIndex OBJECT-TYPE
	SYNTAX		TableIndex
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Physical WAN index number."
	::= { wanUsageEntry 1 }

wanUsageThroughputIn OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of inbound packets which were chosen to be
				discarded even though no errors had been detected to prevent
				their being deliverable to a higher-layer protocol.  One
				possible reason for discarding such a packet could be to
				free up buffer space.
				
				Discontinuities in the value of this counter can occur at
				re-initialization of the management system, and at other
				times as indicated by the value of
				maxWanCounterDiscontinuityTime."
	::= { wanUsageEntry 2 }

wanUsageThroughputOut OBJECT-TYPE
	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The number of outbound packets which were chosen to be
				discarded even though no errors had been detected to prevent
				their being transmitted.  One possible reason for discarding
				such a packet could be to free up buffer space.
				
				Discontinuities in the value of this counter can occur at
				re-initialization of the management system, and at other
				times as indicated by the value of
				maxWanCounterDiscontinuityTime."
	::= { wanUsageEntry 3 }

wanUsageDataTransferred OBJECT-TYPE
	SYNTAX		Counter64
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"The numbe of bytes transferred through."
	::= { wanUsageEntry 4 }

-- Maintenance ----------------------------------------------------------------
maxMaintenance OBJECT IDENTIFIER ::= { pepwaveMAX 2 }

maxReboot OBJECT-TYPE
    SYNTAX		NameString
    MAX-ACCESS	read-write
    STATUS		current
    DESCRIPTION	"Reboot the device. Write 'enable' to take effect."
    ::= { maxMaintenance 1 }

-- LAN config -----------------------------------------------------------------
maxLanConfig OBJECT IDENTIFIER ::= { pepwaveMAX 3 }

portLanSpeedConfig OBJECT-TYPE
	SYNTAX		PortSpeedType
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set device's LAN port speed (Auto/10baseT-FD/
				10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/
				1000baseTx-HD."
	::= { maxLanConfig 1 }

portWanSpeedConfigTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF PortSpeedConfigEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"A list of interface entries."
	::= { maxLanConfig 2 }

portWanSpeedConfigEntry OBJECT-TYPE
	SYNTAX		PortSpeedConfigEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"An entry containing management information applicable to a
				particular interface."
	INDEX   { portWanSpeedConfigIndex }
	::= { portWanSpeedConfigTable 1 }

PortSpeedConfigEntry ::=
	SEQUENCE {
		portWanSpeedConfigIndex			TableIndex,
		portWanSpeedConfig				PortSpeedType
	}

portWanSpeedConfigIndex OBJECT-TYPE
	SYNTAX		TableIndex
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION	"Physical LAN/WAN port name."
	::= { portWanSpeedConfigEntry 1 }

portWanSpeedConfig OBJECT-TYPE
	SYNTAX		PortSpeedType
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set device's WAN port speed (Auto/10baseT-FD/
				10baseT-HD/100baseTx-FD/100baseTx-HD/1000baseTx-FD/
				1000baseTx-HD."
	::= { portWanSpeedConfigEntry 2 }

lanConfigIp OBJECT-TYPE
    SYNTAX		IpAddress
    MAX-ACCESS	read-write
    STATUS		current
    DESCRIPTION	"Set device's LAN IP address."
    ::= { maxLanConfig 3 }

lanConfigSubnetMask OBJECT-TYPE
    SYNTAX		IpAddress
    MAX-ACCESS	read-write
    STATUS		current
    DESCRIPTION	"Set device's LAN sub-net mask."
    ::= { maxLanConfig 4 }

-- Compliance Statements ------------------------------------------------------

maxConformance OBJECT IDENTIFIER ::= { pepwaveMAX 50 }

maxCompliances OBJECT IDENTIFIER ::= { maxConformance 1 }
maxGroups      OBJECT IDENTIFIER ::= { maxConformance 2 }

maxCompliance MODULE-COMPLIANCE
	STATUS		current
	DESCRIPTION	"MAX compliance groups."
	MODULE		-- compliance to the containing MIB module

	GROUP maxSystemGroup
		DESCRIPTION
			"MAX system group."

	GROUP maxLinkGroup
		DESCRIPTION
			"MAX link group."

	GROUP maxWanGroup
		DESCRIPTION
			"MAX WAN group."

	GROUP maxSetGroup
		DESCRIPTION
			"MAX set group."
	::= { maxCompliances 1 }

	maxSystemGroup OBJECT-GROUP
		OBJECTS {
			maxFirmware,
			maxSerialNumber,
			maxTime,
			maxUpTime,
			maxLanStatus,
			maxLanIp,
			maxLanSubnetMask
		}
		STATUS current
		DESCRIPTION
			"MAX's system status group."
		::= { maxGroups 1 }

	maxLinkGroup OBJECT-GROUP
		OBJECTS {
			maxLinkNumber,
			linkName,
			linkStatus,
			linkIp,
			linkThroughputIn,
			linkThroughputOut,
			linkDataTransferred
		}
		STATUS current
		DESCRIPTION
			"MAX's system status group."
		::= { maxGroups 2 }

	maxWanGroup OBJECT-GROUP
		OBJECTS {
			wanUsageThroughputIn,
			wanUsageThroughputOut,
			wanUsageDataTransferred
		}
		STATUS current
		DESCRIPTION
			"MAX's system status group."
		::= { maxGroups 3 }

	maxSetGroup OBJECT-GROUP
		OBJECTS {
			maxReboot,
			portWanSpeedConfig,
			portLanSpeedConfig,
			lanConfigIp,
			lanConfigSubnetMask
		}
		STATUS current
		DESCRIPTION
			"MAX's system status group."
		::= { maxGroups 4 }


END