-- ******************************************************************** -- * Wireless LAN Enterprise Access Point Management Base -- ******************************************************************** AP-SYSTEM-NETWORK DEFINITIONS ::= BEGIN IMPORTS OBJECT-GROUP FROM SNMPv2-CONF enterprises, IpAddress,Unsigned32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, MacAddress FROM SNMPv2-TC; -- -- Node definitions -- -- The Enterprises Number -- .1.3.6.1.4.1.27662 pepwave OBJECT IDENTIFIER ::= { enterprises 27662 } -- .1.3.6.1.4.1.27662.200 productID OBJECT IDENTIFIER ::= { pepwave 200 } -- .1.3.6.1.4.1.27662.200.1 apMib OBJECT IDENTIFIER ::= { productID 1 } -- .1.3.6.1.4.1.27662.200.1.1 apGeneralMib OBJECT IDENTIFIER ::= { apMib 1 } -- ******************************************************************** -- * MODULE IDENTITY -- ******************************************************************** ap-system-network-mib MODULE-IDENTITY LAST-UPDATED "2011081900Z" -- 08 19, 2011 at 12:00 GMT ORGANIZATION "PEPWAVE" CONTACT-INFO "" DESCRIPTION "The MIB module for PEPWAVE Enterprise WiFi AP. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).pepwave(27662).productID(200).apMib(1).apGeneralMib(1).ap-system-network-mib(2)" ::= { apGeneralMib 2 } -- Wireless LAN Access Point Identifier -- -- ********************************************************************** -- * MIB attribute OBJECT-TYPE definitions follow -- ********************************************************************** apNetworkInfo OBJECT IDENTIFIER ::= { ap-system-network-mib 1 } -- ********************************************************************** -- * AP System Network Information -- ********************************************************************** apWanInfo OBJECT IDENTIFIER ::= { apNetworkInfo 1 } apCurrentIpAddressMode OBJECT-TYPE SYNTAX INTEGER{ automatic(0), manual(1), pppoe(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current IP address mode of the AP." ::= { apWanInfo 1 } apCurrentIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current IP address of the AP." ::= { apWanInfo 2 } apCurrentSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current subnet mask of the AP." ::= { apWanInfo 3 } apCurrentGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current default gateway of the AP." ::= { apWanInfo 4 } apCurrentDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the current dns of the AP." ::= { apWanInfo 5 } apPppoeInfo OBJECT IDENTIFIER ::= { apNetworkInfo 4 } apPppoeStatus OBJECT-TYPE SYNTAX INTEGER{disable(0), connecting(1), connected(2)} MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the status of PPPoE." ::= { apPppoeInfo 1 } apPppoeStatusMessage OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the status message of PPPoE." ::= { apPppoeInfo 2 } apNetworkConfig OBJECT IDENTIFIER ::= { ap-system-network-mib 2 } apWanConfig OBJECT IDENTIFIER ::= { apNetworkConfig 1 } apKeepDefaultIp OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the keep default IP status of AP." ::= { apWanConfig 1 } apIpAddressMode OBJECT-TYPE SYNTAX INTEGER{ automatic(0), manual(1), pppoe(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the IP address mode of the AP." ::= { apWanConfig 2 } apIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static management IP address of the AP." ::= { apWanConfig 3 } apSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static netmask of the management interface." ::= { apWanConfig 4 } apGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static gateway IP address for the management interface." ::= { apWanConfig 5 } apDns OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the static DNS for the management interface." ::= { apWanConfig 6 } apLanConfig OBJECT IDENTIFIER ::= { apNetworkConfig 2 } apLanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the IP address of the LAN interface." ::= { apLanConfig 1 } apLanSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the subnet mask of the LAN interface." ::= { apLanConfig 2 } apLanDhcpServer OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of the LAN DHCP Server." ::= { apLanConfig 3 } apLanDhcpServerStartRange OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the start range of the LAN DHCP Server." ::= { apLanConfig 4 } apLanDhcpServerStopRange OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the stop range of the LAN DHCP Server." ::= { apLanConfig 5 } apLanDhcpServerSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the subnet mask of the LAN DHCP Server." ::= { apLanConfig 6 } apLanDhcpServerBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the broadcast address of the LAN DHCP Server." ::= { apLanConfig 7 } apLanDhcpServerGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the gateway of the LAN DHCP Server." ::= { apLanConfig 8 } apLanDhcpServerDns1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the first DNS server of the LAN DHCP Server." ::= { apLanConfig 9 } apLanDhcpServerDns2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the second DNS server of the LAN DHCP Server." ::= { apLanConfig 10 } apLanDhcpServerDns3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the third DNS server of the LAN DHCP Server." ::= { apLanConfig 11 } apLanDhcpDomain OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) -- MAX-ACCESS read-write MAX-ACCESS not-accessible STATUS current DESCRIPTION "This attribute indicates the domain of the LAN DHCP Server." ::= { apLanConfig 12 } apLanDhcpRelease OBJECT-TYPE SYNTAX INTEGER(60..9999999) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the lease time of the LAN DHCP Server." ::= { apLanConfig 13 } -- ********************************************************************** -- * LAN Reservation Table -- ********************************************************************** apLanReservationTable OBJECT-TYPE SYNTAX SEQUENCE OF ApLanReservationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LAN Reservation Table." ::= { apLanConfig 14 } apLanReservationEntry OBJECT-TYPE SYNTAX ApLanReservationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the apLanReservationTable." INDEX { apLanReservationIndex } ::= { apLanReservationTable 1 } ApLanReservationEntry ::= SEQUENCE { apLanReservationIndex INTEGER, apLanReservationRowControl INTEGER, apLanReservationMacAddress MacAddress, apLanReservationIp IpAddress } apLanReservationIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the LAN Reservation index" ::= { apLanReservationEntry 1 } apLanReservationRowControl OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The LAN Reservation status. Supported values: active(1) - valid entry notReady(3) - non-valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry" ::= { apLanReservationEntry 2 } apLanReservationMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates a MAC address entry in the LAN Reservation. Remarks: Input format: 0xXX 0xXX 0xXX 0xXX 0xXX 0xXX OR XX:XX:XX:XX:XX:XX OR XX-XX-XX-XX-XX-XX (examples: 0xab 0xcd 0xef 0x01 0x02 0x03 OR ab:cd:ef:01:02:03 OR ab-cd-ef-01-02-03) X: [0:9] or [a:f] or [A:F] *** Please don 't enter duplicate MAC address. ***" ::= { apLanReservationEntry 3 } apLanReservationIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates a IP address entry in the LAN Reservation." ::= { apLanReservationEntry 4 } apPppoeConfig OBJECT IDENTIFIER ::= { apNetworkConfig 3 } apPppoeUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the username of PPPoE." ::= { apPppoeConfig 1 } apPppoePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the password of PPPoE." ::= { apPppoeConfig 2 } apPppoeServiceName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the service name of PPPoE." ::= { apPppoeConfig 3 } apDmzConfig OBJECT IDENTIFIER ::= { apNetworkConfig 4 } apDmzStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the status of DMZ." ::= { apDmzConfig 1 } apDmzIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute indicates the IP address of DMZ." ::= { apDmzConfig 2 } -- ********************************************************************** -- * Port Forward Table -- ********************************************************************** apPortForwardTable OBJECT-TYPE SYNTAX SEQUENCE OF ApPortForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LAN Port Forward Table." ::= { apNetworkConfig 5 } apPortForwardEntry OBJECT-TYPE SYNTAX ApPortForwardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the apPortForwardTable." INDEX { apPortForwardIndex } ::= { apPortForwardTable 1 } ApPortForwardEntry ::= SEQUENCE { apPortForwardIndex INTEGER, apPortForwardRowControl INTEGER, apPortForwardName OCTET STRING, apPortForwardToIp IpAddress, apPortForwardPortProtocol INTEGER, apPortForwardAppServiceType INTEGER, apPortForwardPortType INTEGER, apPortForwardFromPort OCTET STRING, apPortForwardToPort OCTET STRING } apPortForwardIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the port forward index" ::= { apPortForwardEntry 1 } apPortForwardRowControl OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The port forward status. Supported values: active(1) - valid entry notReady(3) - non-valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry" ::= { apPortForwardEntry 2 } apPortForwardName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the name of port forward." ::= { apPortForwardEntry 3 } apPortForwardToIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the to IP address of port forward." ::= { apPortForwardEntry 4 } apPortForwardPortProtocol OBJECT-TYPE SYNTAX INTEGER{ tcp(0), udp(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the protocol of port forward." ::= { apPortForwardEntry 5 } apPortForwardAppServiceType OBJECT-TYPE SYNTAX INTEGER{ na(0), http(80), https(443), iamp(143), pop3(110), rdp(3389), smtp(25), ssh(22), telnet(23), aol(5190), auth(113), citrix(1494), dns(53), ftp(21), ldap(389), loctusnotes(1352), ms-sql-monitor(1434), ms-sql-server(1433), ntp(123), radius(1812), radius-acct(1813), rtsp(554), snmp(161), snmp-trap(162), syslog(514), traceroute(33434) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the service type of port forward." ::= { apPortForwardEntry 6 } apPortForwardPortType OBJECT-TYPE SYNTAX INTEGER{ single-port(0), port-range(1), port-mapping(2), range-mapping(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the port type of port forward." ::= { apPortForwardEntry 7 } apPortForwardFromPort OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..11)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the from port of port forward." ::= { apPortForwardEntry 8 } apPortForwardToPort OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..11)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates the to port of port forward." ::= { apPortForwardEntry 9 } END