-- =============================================================== -- Copyright (C) 2003 Paradyne Corporation. -- =============================================================== PDN-MPE-DSLAM-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY, Integer32, TimeTicks FROM SNMPv2-SMI OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ContactState FROM PDN-TC entPhysicalIndex, entPhysicalEntry FROM ENTITY-MIB pdn-mpe FROM PDN-HEADER-MIB mpeSysObjectID FROM PDN-MPE-MIB2-MIB ; mpe-dslam MODULE-IDENTITY LAST-UPDATED "200405131400Z" -- May 13, 2004 ORGANIZATION "Paradyne Corporation MIB Working Group" CONTACT-INFO "Paradyne Corporation 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editors Prakash Easwar Jesus Pinto Dragana Gough Clay Sikes" DESCRIPTION "The mpe dslam MIB. This MIB is written specifically to extend entPhysicalTable." REVISION "200405131400Z" -- May 13, 2004 DESCRIPTION "Jesus Pinto Added two traps for fan failure: mpeFanEntityModuleFailure, mpeFanEntityModuleOperational" REVISION "200504081400Z" -- April 08, 2004 DESCRIPTION "Jesus Pinto Added four new traps for PowerSupply failure: mpePowerSourceAFailure mpePowerSourceBFailure mpePowerSourceAOperational mpePowerSourceBOperational" REVISION "200306060000Z" -- June 6, 2003 DESCRIPTION "Jesus Pinto and Clay Sikes Removed the entPhysicalIndex as an object in the mpeAlarmRelayInputStateChanged notification. This object was redundant in that it's the instance part of the mpeAlarmRelayState object." REVISION "200304250000Z" -- April 25, 2003 DESCRIPTION "Jesus Pinto and Clay Sikes Change mpeAlarmRelayInputState to mpeAlarmRelayState and changed it from a read-only object to a read- write object. This should give ultimate flexibility." REVISION "200304180000Z" -- April 18, 2003 DESCRIPTION "Jesus Pinto and Clay Sikes Needed objects to read Alarm Relay Input State. The addition of mpeEntPhysicalExtAlarmRelayInputContactState below was not a good idea as it implied a dense augments. mpeEntPhysicalExtAlarmRelayInputContactState was deprecated. Added a new table, mpeAlarmRelayTable to hold alarm relay objects where the table implies a sparse augments. Deprecated mpeAlarmRrelayEquipmentIndex, mpeAlarmRelayInputContactState, and the mpeAlarmRelayInputcontactStateChanged trap they were designed for to discourage use in new projects. Added a new trap, mpeAlarmRelayInputStateChanged, as a replacement that uses objects defined in or related to the mpeAlarmRelayTable. The mpeAlarmRelayTable allows Alarm Relay Input state to be read and has a direct relationship with the objects defined for the mpeAlarmRelayInputStateChanged trap. Since this table is indexed the entPhysicalIndex, it is extremely flexible in that it can apply to a Single Management Entity / Single Logical Entity, a chassis, or what ever level of granularity is desired in the implementation." REVISION "200303201500Z" -- March 20, 2003 DESCRIPTION "Added new notifications to complement the entConfigChange notification defined in RFC2737." REVISION "200303070000Z" -- March 7, 2003 DESCRIPTION "Added mpeEntPhysicalExtAlarmRelayInputContactState." REVISION "200210250000Z" -- October 25, 2002 DESCRIPTION "Added mpeEntPhysicalExtTable and cleaned up some MIB compiler warnings." REVISION "200208150000Z" DESCRIPTION "Added mpeAlarmRelayEquipIndex, Added mpeAlarmRelayInputContactState, Added mpeAlarmRelayInputContactStateChanged trap." REVISION "200202210000Z" DESCRIPTION "Added mpeDeviceFailureCleared Trap." REVISION "200201280000Z" DESCRIPTION "Added table to extend entityPhysicalTable by one object that would specify state of the alarm." REVISION "200001220000Z" DESCRIPTION "Initial Release" ::= { pdn-mpe 24 } mpeSysDevDslamMIBObjects OBJECT IDENTIFIER ::= { mpe-dslam 1 } mpeSysDevDslamMIBTraps OBJECT IDENTIFIER ::= { mpe-dslam 2 } mpeEntExtAlarms OBJECT IDENTIFIER ::= { mpeSysDevDslamMIBObjects 1} mpeAlarmRelay OBJECT IDENTIFIER ::= { mpeSysDevDslamMIBObjects 2} mpeEntExtMibObjects OBJECT IDENTIFIER ::= { mpeSysDevDslamMIBObjects 3} mpeSysDevDslamMIBNotifications OBJECT IDENTIFIER ::= { mpeSysDevDslamMIBTraps 0 } -- ========================================================================= -- Textual Conventions -- ========================================================================= MpeEntExtAdminStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Values to support the desired state of the entity. These values were selected to correspond to the syntax of the ifAdminStatus in the IF-MIB." SYNTAX INTEGER { up(1), -- The Administrator considers the entity to be in -- the 'up' or 'operational' state. down(2), -- The Administrator considers the entity to be in -- the 'down' or non-operational' state. Generally -- in this state, alarms or traps should not be reported. testing(3) -- The Administrator considers the entity to be in -- a state where the entity is under going some sort -- of tests. } MpeEntExtOperStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Values to support the current operational state of the entity. These values were selected to correspond to the syntax of the ifOperStatus in the IF-MIB." SYNTAX INTEGER { up(1), -- The entity is operational. down(2), -- The entity is non-operational. testing(3), -- The entity is in some test mode. unknown(4), -- The entity is in an 'unknown' state. dormant(5), -- The entity is in a 'dormant' state. notPresent(6), -- The entity was present, but is currently -- not present. reserved1(7) -- Not used, but reserved. } -- ========================================================================= -- MIB Objects -- ========================================================================= -- --ALARM objects -- mpeEntExtAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF MpeEntExtAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the alarm states of the objects listed in the entity-MIB entPhysicalTable." ::= { mpeEntExtAlarms 1 } mpeEntExtAlarmEntry OBJECT-TYPE SYNTAX MpeEntExtAlarmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An mpeEntExtAlarmTable entry indicates the alarm state of the physical entity." AUGMENTS { entPhysicalEntry } ::= { mpeEntExtAlarmTable 1 } MpeEntExtAlarmEntry ::= SEQUENCE { mpeEntExtAlarm TruthValue } mpeEntExtAlarm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the alarm state of the physical entity." ::= { mpeEntExtAlarmEntry 1 } -- -- AlarmRelay objects. For the purpose of being used -- as VarBinds for the AlarmRelayInputContact trap. -- mpeAlarmRelayEquipIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This variable is the index of the equipment whose alarms are being relayed. It is a integer number starting from 1 until the max number of physical connectors the DSLAM device has to support relay. NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable and mpeAlarmRelayInputStateChanged objects." ::= { mpeAlarmRelay 1 } mpeAlarmRelayInputContactState OBJECT-TYPE SYNTAX ContactState MAX-ACCESS accessible-for-notify STATUS deprecated DESCRIPTION "This variable indicates the alarm state of the Input Contact (open/closed). NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayTable and mpeAlarmRelayInputStateChanged objects." ::= { mpeAlarmRelay 2 } -- ========================================================================= -- Alarm Relay Table -- ========================================================================= mpeAlarmRelayTable OBJECT-TYPE SYNTAX SEQUENCE OF MpeAlarmRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds objects that relate to Alarm Relay input or output." ::= { mpeAlarmRelay 3 } mpeAlarmRelayEntry OBJECT-TYPE SYNTAX MpeAlarmRelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is a sparse augmentation of the entPhysicalEntry. As such, it is indexed by the entPhysicalIndex and not an augmentation of the entPhysicalTable." INDEX { entPhysicalIndex } ::= { mpeAlarmRelayTable 1 } MpeAlarmRelayEntry ::= SEQUENCE { mpeAlarmRelayState ContactState } mpeAlarmRelayState OBJECT-TYPE SYNTAX ContactState MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to read or write the state an alarm relay input or output." ::= { mpeAlarmRelayEntry 1 } -- ========================================================================= -- Augmentation of entPhysicalTable -- ========================================================================= mpeEntPhysicalExtTable OBJECT-TYPE SYNTAX SEQUENCE OF MpeEntPhysicalExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains entity information that is not defined in the standard ENTITY-MIB." ::= { mpeEntExtMibObjects 1 } mpeEntPhysicalExtEntry OBJECT-TYPE SYNTAX MpeEntPhysicalExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry extends the entPhysicalEntry defined in the ENTITY-MIB." AUGMENTS { entPhysicalEntry } ::= { mpeEntPhysicalExtTable 1 } MpeEntPhysicalExtEntry ::= SEQUENCE { mpeEntPhysicalExtUpTime TimeTicks, mpeEntPhysicalExtLocation SnmpAdminString, mpeEntPhysicalExtAdminStatus MpeEntExtAdminStatus, mpeEntPhysicalExtOperStatus MpeEntExtOperStatus } mpeEntPhysicalExtUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second --just like the sysUpTime) since the entity was last re-initialized." ::= { mpeEntPhysicalExtEntry 1 } mpeEntPhysicalExtLocation OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the manager to enter the location of the physical entity where applicable. For example, in a stack, chassis or units may be in different locations. In this case, it would be logical for the manager to set this object to the location of the associated chassis. Where the location doesn't make sense, it is recommended that the object return a zero-length string." ::= { mpeEntPhysicalExtEntry 2 } mpeEntPhysicalExtAdminStatus OBJECT-TYPE SYNTAX MpeEntExtAdminStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the entity." ::= { mpeEntPhysicalExtEntry 3 } mpeEntPhysicalExtOperStatus OBJECT-TYPE SYNTAX MpeEntExtOperStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the entity." ::= { mpeEntPhysicalExtEntry 4 } -- ========================================================================= --Traps -- ========================================================================= mpeCcn NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap signifies a Configuration change or software upgrade in the xDSL card. This trap is of 'warning' class" ::= { mpeSysDevDslamMIBTraps 7 } mpeDeviceFailure NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test. Note there are no variable bindings for this trap" ::= { mpeSysDevDslamMIBTraps 15 } mpeDeviceFailureCleared NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap signifies that the sending protocol's device has failed but now it is operational. Failure was not a result of a device test." ::= { mpeSysDevDslamMIBTraps 16 } mpeNonSupportedMCC NOTIFICATION-TYPE OBJECTS { mpeSysObjectID } STATUS current DESCRIPTION "AN has detected MCC firmware release too low to support this device" ::= { mpeSysDevDslamMIBTraps 20 } mpeNonSupportedChassis NOTIFICATION-TYPE OBJECTS { mpeSysObjectID } STATUS current DESCRIPTION "AN in slot xx has been installed in a chassis that cannot support one or more of its features. " ::= { mpeSysDevDslamMIBTraps 21 } mpeAlarmRelayInputContactStateChanged NOTIFICATION-TYPE OBJECTS { mpeAlarmRelayEquipIndex, mpeAlarmRelayInputContactState } STATUS deprecated DESCRIPTION "This trap signifies that the state of the InputContact Alarm has changed since last time. NOTE: This object has been deprecated. Please consider using the mpeAlarmRelayInputStateChanged notification." ::= { mpeSysDevDslamMIBTraps 22 } mpeEntPhysicalExtEntityCreated NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION " This trap signifies that an instance of this entity has been created in the entPhysicalTable. This trap is generated in addition to the entConfigChange notification defined in RFC2737." ::= { mpeSysDevDslamMIBTraps 23 } mpeEntPhysicalExtEntityDeleted NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION " This trap signifies that an instance of this entity has been deleted from the entPhysicalTable. This trap is generated in addition to the entConfigChange notification defined in RFC2737." ::= { mpeSysDevDslamMIBTraps 24 } mpeEntPhysicalExtEntityChanged NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION " This trap signifies that an instance of this entity has been modified in the entPhysicalTable as a result of a change in any of the objects in that table. This trap is generated in addition to the entConfigChange notification defined in RFC2737." ::= { mpeSysDevDslamMIBTraps 25 } mpeAlarmRelayInputStateChanged NOTIFICATION-TYPE OBJECTS { mpeAlarmRelayState } STATUS current DESCRIPTION "This trap signifies that the state of the Alarm Relay Input has changed." ::= { mpeSysDevDslamMIBNotifications 26 } mpeFanEntityModuleFailure NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap indicates the failure of the fan module on the device." ::= { mpeSysDevDslamMIBNotifications 27 } mpeFanEntityModuleOperational NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap indicates the indicates the fan module on the device is back to operational." ::= { mpeSysDevDslamMIBNotifications 28 } mpePowerSourceAFailure NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap indicates that power source A has failed." ::= { mpeSysDevDslamMIBNotifications 29 } mpePowerSourceBFailure NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap indicates that power source B has failed." ::= { mpeSysDevDslamMIBNotifications 30 } mpePowerSourceAOperational NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap indicates that the power source A is operational. This trap compliments powerSourceAFailure trap." ::= { mpeSysDevDslamMIBNotifications 31 } mpePowerSourceBOperational NOTIFICATION-TYPE OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION "This trap indicates that the power source B is operational. This trap compliments powerSourceBFailure trap." ::= { mpeSysDevDslamMIBNotifications 32 } -- ========================================================================= --CONFORMANCE -- ========================================================================= mpeSysDevDslamConformance OBJECT IDENTIFIER ::= { mpe-dslam 3 } mpeSysDevDslamGroups OBJECT IDENTIFIER ::= { mpeSysDevDslamConformance 1 } mpeSysDevDslamCompliances OBJECT IDENTIFIER ::= { mpeSysDevDslamConformance 2 } mpeSysDevDslamDeprecatedGroup OBJECT IDENTIFIER ::= { mpeSysDevDslamConformance 3 } -- ========================================================================= -- COMPLIANCE statements -- ========================================================================= mpeSysDevDslamAlarmCompliances MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities and their alarms states." MODULE -- this module GROUP mpeSysDevDslamAlarmStateGroup DESCRIPTION "The conditional objects in the group" OBJECT mpeEntExtAlarm DESCRIPTION "Write access is not required." GROUP mpeEntityExtNotificationGroup DESCRIPTION "Notification group" GROUP mpeSysDevDslamAlarmRelayGroup DESCRIPTION "Alarm Relay group" GROUP mpeEntPhysicalExtGroup DESCRIPTION "Entity Physical Ext group" GROUP mpeEntPhysicalExtNotificationObjectGroup DESCRIPTION "Notification objects group" GROUP mpeEntityExtPowerFailureNotificationGroup DESCRIPTION "Power Supply notification objects group" ::= { mpeSysDevDslamCompliances 1 } mpeSysDevDslamAlarmDeprecatedCompliances MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for deprecated groups" MODULE -- this module GROUP mpeDslamDeprecatedObjectsGroup DESCRIPTION "Entity Physical Ext group" GROUP mpeDslamDeprecatedNotificationsGroup DESCRIPTION "Notification objects group" ::= { mpeSysDevDslamCompliances 2 } mpeSysDevDslamAlarmStateGroup OBJECT-GROUP OBJECTS { mpeEntExtAlarm } STATUS current DESCRIPTION "The collection of objects which are used to describe alarm states for equipments physically connected to a DSLAM device." ::= { mpeSysDevDslamGroups 1 } mpeEntityExtNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { mpeCcn, mpeDeviceFailure, mpeDeviceFailureCleared, mpeNonSupportedMCC, mpeNonSupportedChassis, mpeEntPhysicalExtEntityCreated, mpeEntPhysicalExtEntityDeleted, mpeEntPhysicalExtEntityChanged, mpeAlarmRelayInputStateChanged, mpeFanEntityModuleFailure, mpeFanEntityModuleOperational } STATUS current DESCRIPTION "The collection of objects which are used to notify that trap conditions are met." ::= { mpeSysDevDslamGroups 2 } mpeSysDevDslamAlarmRelayGroup OBJECT-GROUP OBJECTS { mpeAlarmRelayState } STATUS current DESCRIPTION "The collection of objects which are used for Alarm Relay objects." ::= { mpeSysDevDslamGroups 3 } mpeEntPhysicalExtGroup OBJECT-GROUP OBJECTS { mpeEntPhysicalExtUpTime, mpeEntPhysicalExtLocation, mpeEntPhysicalExtAdminStatus, mpeEntPhysicalExtOperStatus } STATUS current DESCRIPTION "The collection of objects which are used in extending the entPhysicalTable." ::= { mpeSysDevDslamGroups 4 } mpeEntPhysicalExtNotificationObjectGroup OBJECT-GROUP OBJECTS { entPhysicalIndex } STATUS current DESCRIPTION " A collection of objects that are included in the OBJECTS clause of notifications." ::= { mpeSysDevDslamGroups 5 } mpeEntityExtPowerFailureNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { mpePowerSourceAFailure, mpePowerSourceBFailure, mpePowerSourceAOperational, mpePowerSourceBOperational } STATUS current DESCRIPTION "The collection of objects which are used to notify that trap conditions are met." ::= { mpeSysDevDslamGroups 6 } ------------------------ -- Deprecated Objects -- ------------------------ mpeDslamDeprecatedObjectsGroup OBJECT-GROUP OBJECTS { mpeAlarmRelayEquipIndex, mpeAlarmRelayInputContactState } STATUS deprecated DESCRIPTION "The collection of objects that have been deprecated." ::= { mpeSysDevDslamDeprecatedGroup 1 } mpeDslamDeprecatedNotificationsGroup NOTIFICATION-GROUP NOTIFICATIONS { mpeAlarmRelayInputContactStateChanged } STATUS deprecated DESCRIPTION "The collection of traps/notifications that have been deprecated." ::= { mpeSysDevDslamDeprecatedGroup 2 } END