PDN-HEALTHANDSTATUS-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString, ifIndex FROM RFC1213-MIB IpAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 pdn-devStatus FROM PDN-HEADER-MIB entPhysicalIndex FROM ENTITY-MIB TRAP-TYPE FROM RFC-1215; -- =============================================================== -- -- Device Health and Status -- -- Version 1.8.0 -- Last Updated 11/18/2003 -- History: -- 1.8.0 - Changed dup name devSelfTestResults -- 1.7.0 - Updated by Rob Stainberger 05/26/00 -- - moved devFailureStatus to devStatus 7 -- 1.6.0 - Updated by Dragana Gough, 03/08/2000 -- - added deviceFailureStatus Display string -- - object -- 1.5.0 - Updated by Dragana Gough , 02/23/2000 -- - Added deviceFailure, devicelfTestFailure and devStatusTrapEnable -- 1.4.0 - Updated by Rob Steinberger, 11/10/98 -- - Added devLastTrapString for string Variable binding. -- 1.3.0 - Added devAuthenicationFailureIpAddress for trap processing -- 1.2.0 - Updated by Soklei Leong, 6/10/98 -- - Added devSNMPSetStatusTable for retrieving the status of a SNMP -- - SET command when an error occurs. -- 1.1.0 - Updated by Rocco Sansone, 8/22/97 -- - Added devAbortStatus object for retrieving the last abort code. -- 1.0.0 - Created 1994. devStatus OBJECT IDENTIFIER ::= { pdn-devStatus 1 } devHealthAndStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Health and Status of the device. Health & Status is represented as a concatenation of health and status message strings, where each message string is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the Health and Status codes." ::= { devStatus 1 } devSelfTestResults OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Self-test results. Self-test (or power-up test) results summarizes the test results of each CCA, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages." ::= { devStatus 2 } devAbortStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Abort Status. The devAbortStatus object is used to retrieve the latest abort status that is stored in the agent. The agent will need to save the latest abort information in non-volatile memory so that it will be available immediately after a fatal reset. How long the latest failure information is remembered after this point is an implementation issue. Refer to device-specific user documentation for a complete description of the abort codes and/or messages." ::= { devStatus 3 } devSNMPSetStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF DevSNMPSetStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing SNMP Set command Statuses when an error occurs. It contains maximum of 5 entries. Oldest entry is pushed out when the table is full and a new entry is added." ::= { devStatus 4 } devSNMPSetStatusEntry OBJECT-TYPE SYNTAX DevSNMPSetStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding each SNMP Set command Status when en error occurs. Each entry is index by a request ID generated by the client and attached to the UDP when the Set command is sent." INDEX { devSNMPSetReqId } ::= { devSNMPSetStatusTable 1 } DevSNMPSetStatusEntry ::= SEQUENCE { devSNMPSetReqId INTEGER, devSNMPSetStatus DisplayString } devSNMPSetReqId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Request ID which identifies the SNMP Set command in error." ::= { devSNMPSetStatusEntry 1 } devSNMPSetStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the error message string associated with the Set command of this row in the table." ::= { devSNMPSetStatusEntry 2 } devAuthenticationFailureIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Authentication Failure Ip Address is used when a authenticationFailure trap is generated. The single varbind represents the ip address causing the error. If the ip address is not known, 0.0.0.0 is used." ::= { devStatus 5 } devLastTrapString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains a textual description of the last trap that was processed by the device. The exact text in the description is device specific and should be contained user documentation outside of this MIB. It is recommended that the important information is contained within the first 100 characters." ::= { devStatus 6 } devFailureStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION " Device Failure status. Conditions that cause failure are further described in the device documentation." ::= { devStatus 7 } devStatusTrapEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION " This object provides ability to enable or disable individual enterprise traps. The object is bit map represented as a sum. The bit positions are: 1 deviceSelfTestFailure 2 deviceFailure" ::= { devStatus 8 } devSelfTestResultTable OBJECT-TYPE SYNTAX SEQUENCE OF DevSelfTestResultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing results of power on selftest for the whole unit." ::= { devStatus 9 } devSelfTestResultEntry OBJECT-TYPE SYNTAX DevSelfTestResultEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The information regarding each SelfTest on each unit." INDEX { entPhysicalIndex } ::= { devSelfTestResultTable 1 } DevSelfTestResultEntry ::= SEQUENCE { devSelfTestResult DisplayString } devSelfTestResult OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Self-test results. Self-test (or power-up test) results summarizes the test results of each interface, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages." ::= { devSelfTestResultEntry 1 } devSelfTestFailure TRAP-TYPE ENTERPRISE devStatus VARIABLES { ifIndex, devSelfTestResults } DESCRIPTION "This trap signifies that the sending protocol's device has failed self test. The variable binding for this trap would be the selfTest devSelfTestResults object of the Health and Status MIB. The exact format of this display string will be well-documented in the Operational Specifications of the device." ::= 1 deviceFailure TRAP-TYPE ENTERPRISE devStatus VARIABLES { ifIndex, devFailureStatus } DESCRIPTION " This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test." ::= 2 END