--=========================================================================== -- Copyright (C) 2000 Paradyne Corporation -- PDN-ETHER-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-GROUP FROM SNMPv2-CONF pdn-common FROM PDN-HEADER-MIB SwitchState, ManagementType, ResetStates FROM PDN-TC ifIndex FROM RFC1213-MIB ifMauEntry, ifMauIfIndex, ifMauIndex, ifJackIndex FROM MAU-MIB ; pdn-ether MODULE-IDENTITY LAST-UPDATED "0205100000Z" ORGANIZATION "Paradyne Corporation MIB Working Group" CONTACT-INFO "Paradyne Corporation 8545 126th Avenue North Largo, FL 33733 www.paradyne.com General Comments to: mibwg_team@paradyne.com Editors Wayne Jadoo Prakash Easwar Jesus A. Pinto Dragana Gough Clay Sikes" DESCRIPTION " This MIB contains objects that are used to configure ethernet interfaces." REVISION "0205100000Z" DESCRIPTION "Added pdnIfJackTable. NOTE: please read the comments as to why the ifJackTable, in RFC 2668, was not augmented." REVISION "0201090000Z" DESCRIPTION "Added pdnPortConfigMauExtTable to extend ipMauTable from RFC 2668." REVISION "200108240000Z" DESCRIPTION "Add pdnPortConfigEthernetAutoNegotiateMode mib object. Add pdnPortCOnfigEthernetSpeed mib object." REVISION "200005020000Z" DESCRIPTION "Initial Release" ::= { pdn-common 18 } pdnPortConfigMIBObjects OBJECT IDENTIFIER ::= { pdn-ether 1 } pdnPortConfigMIBTraps OBJECT IDENTIFIER ::= { pdn-ether 2 } pdnPortConfigEthernet OBJECT IDENTIFIER ::= { pdnPortConfigMIBObjects 1 } pdnPortConfigGroups OBJECT IDENTIFIER ::= { pdnPortConfigMIBObjects 2 } pdnPortConfigMauExtMIBObject OBJECT IDENTIFIER ::= { pdnPortConfigMIBObjects 3 } pdnPortConfigIfJackMIBObject OBJECT IDENTIFIER ::= { pdnPortConfigMIBObjects 4 } -- Ethernet Type of Configuration pdnPortConfigEthernetTable OBJECT-TYPE SYNTAX SEQUENCE OF PdnPortConfigEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that contains information about the Ethernet port configuration" ::= { pdnPortConfigEthernet 1 } pdnPortConfigEthernetEntry OBJECT-TYPE SYNTAX PdnPortConfigEthernetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that contains configuration information about an ethernet Port " INDEX { ifIndex } ::= { pdnPortConfigEthernetTable 1 } PdnPortConfigEthernetEntry ::= SEQUENCE { pdnPortConfigEthernetDuplexMode SwitchState, pdnPortConfigEthernetManageType ManagementType, pdnPortConfigEthernetResetState ResetStates, pdnPortConfigEthernetAutoNegotiate SwitchState, pdnPortConfigEthernetSpeed INTEGER } pdnPortConfigEthernetDuplexMode OBJECT-TYPE SYNTAX SwitchState MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable or Disable Duplex Mode on an ethernet Port. This object can not be enabled if the auto-negotiate mode is enabled" DEFVAL { disabled } -- Disabled ::= { pdnPortConfigEthernetEntry 1 } pdnPortConfigEthernetManageType OBJECT-TYPE SYNTAX ManagementType MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to Enable or Disable Inband or Outband Management." DEFVAL { outband } ::= { pdnPortConfigEthernetEntry 2 } pdnPortConfigEthernetResetState OBJECT-TYPE SYNTAX ResetStates MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to reset the ethernet port." DEFVAL { noOp } -- No ::= { pdnPortConfigEthernetEntry 3 } pdnPortConfigEthernetAutoNegotiate OBJECT-TYPE SYNTAX SwitchState MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable or disable the auto-negotiate mode. Enabling this mode will disable selection of the speed and/or full duplex mode." DEFVAL { enabled } -- Enabled ::= { pdnPortConfigEthernetEntry 4 } pdnPortConfigEthernetSpeed OBJECT-TYPE SYNTAX INTEGER { tenBaseT (1), hundredBaseT (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object corresponds to the speed of the ethernet port. This object can not be set if the auto-negotiate mode is enabled." DEFVAL { tenBaseT } -- 10BaseT ::= { pdnPortConfigEthernetEntry 5 } -- Extention talbe to ifMauTable -- to add ConfigXover object pdnPortConfigMauExtTable OBJECT-TYPE SYNTAX SEQUENCE OF PdnPortConfigMauExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Table that contains configuration information about the Ethernet port configuration and it extends standard MAU table from RFC2668." ::= { pdnPortConfigMauExtMIBObject 1 } pdnPortConfigMauExtEntry OBJECT-TYPE SYNTAX PdnPortConfigMauExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that contains configuration information about an ethernet Port " AUGMENTS { ifMauEntry } ::= { pdnPortConfigMauExtTable 1 } PdnPortConfigMauExtEntry ::= SEQUENCE { pdnPortConfigXover INTEGER } pdnPortConfigXover OBJECT-TYPE SYNTAX INTEGER { mdi(1), mdix(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to configure if crossover or straightthrough cable is used on ethernet interface if the interface is not set for autonegotiontion." ::= { pdnPortConfigMauExtEntry 1 } -- Augmentation of the ifJactTable in the 802.3 MAU MIB -- RFC 2668 -- Originally I wanted to implement this table as an augmentation -- of the ifJackTable in the 802.3 MAU MIB specified in RFC 2668 and -- call it pdnIfJackExtTable. However, the SNMP Research MIB Tools would -- not successfully compile an augmentation of this table with an -- object that is read-write because the ifJackTable only has -- read-only objects. pdnIfJackTable OBJECT-TYPE SYNTAX SEQUENCE OF PdnIfJackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table conceptually extends the ifJackTable but not as an augmentation. See the note above." ::= { pdnPortConfigIfJackMIBObject 1 } pdnIfJackEntry OBJECT-TYPE SYNTAX PdnIfJackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry that contains configuration information about a jack." INDEX { ifMauIfIndex, ifMauIndex, ifJackIndex } ::= { pdnIfJackTable 1 } PdnIfJackEntry ::= SEQUENCE { pdnActiveJack INTEGER } pdnActiveJack OBJECT-TYPE SYNTAX INTEGER { fiber(1), -- Small Form-factor Pluggable (SFP) -- for fiber interfaces rj45(2), -- Copper wire interface auto(3) -- Automatically detects fiber(1) or -- rj45(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object allows the jack type to be configured or a priority to be set. This applies to Ethernet interfaces that may support more than one type of jack on an inter- face and only one jack is valid at a time. Consider two cases: 1. A product supports two types of jacks, a RJ45 copper- wire interface and a SFP fiber interface. The product is required to have the user set the active jack or allow it to be auto detected. The values for this object that allow the requirement to be satisfied and their interp- retation are as follows: a. fiber(1) - The fiber jack is active and the others, e.g. rj45, are ignored. b. rj45(2) - The rj45 jack is actie and the others, eg.fiber, are ignored. c. auto(3) - Either jack can be used and it is up to the implementation to determine which jack has presedence when both jacks are active. This determination must be clearly documented in the SNMP Operational Speci- fication. No default is specified for this MIB object so the default value for this object must be clearly documented in the SNMP Operational Specification. 2. A product supports two types of jacks, a RJ45 copper- wire interface and s SFP fiber interface. The product is required to have the user select which jack has priority when both jacks are active. The values for this object that allow the requirement to be satisfied and their interpretation are as follos: a. fiber(1) - The fiber jack has priority. b. rj45(2) - The rj45 jack has priority. c. auto(3) - Not used." ::= { pdnIfJackEntry 1 } --CONFORMANCE INFORMATION pdnPortConfigEthernetGroup OBJECT-GROUP OBJECTS { pdnPortConfigEthernetDuplexMode, pdnPortConfigEthernetManageType, pdnPortConfigEthernetResetState, pdnPortConfigEthernetAutoNegotiate, pdnPortConfigEthernetSpeed } STATUS current DESCRIPTION "This collection of objects is used to set mode and rate on any ethernet interface." ::= { pdnPortConfigGroups 1 } pdnPortConfigExtMauGroup OBJECT-GROUP OBJECTS { pdnPortConfigXover } STATUS current DESCRIPTION "This object is used to set xover mode on any ethernet interface." ::= { pdnPortConfigGroups 2 } pdnPortConfigExtIfJackGroup OBJECT-GROUP OBJECTS { pdnActiveJack } STATUS current DESCRIPTION "This object is used to set active jack on any ethernet interface supporting more than one jack." ::= { pdnPortConfigGroups 3 } END