SPEEDSINGLELINE-XFP-MIB DEFINITIONS ::= BEGIN

--*****************************************************************************************
--*****   Version History   ***************************************************************
--=========================================================================================

--V1.0  22.10.2007 ML: Erste Version SPEEDSINGLELINE-XFP-MIB
--  Supported Modules:
--                             SPEED-SINGLELINE XFP
--*****************************************************************************************

IMPORTS
	DisplayString	FROM RFC1213-MIB
	OBJECT-TYPE	FROM RFC-1212
	TRAP-TYPE	FROM RFC-1215
	enterprises, IpAddress, TimeTicks, MODULE-IDENTITY	FROM SNMPv2-SMI
	PanDacom	FROM PanDacom-MIB
	nmSPEEDCARRIER, converter	FROM SPEEDCARRIER-MIB
; -- END of IMPORTS

--*******************************************************************

	convSpeedSingleLineXFP MODULE-IDENTITY
		LAST-UPDATED "1312120000Z"
		ORGANIZATION "Pan Dacom Direkt GmbH"
		CONTACT-INFO
			"Pan Dacom Direkt GmbH
			Dreieich Plaza 1B
			63303 Dreieich
			Germany
			Tel. : +49 6103/932-333
			Fax. : +49 6103/932-444
			email: kontakt@pandacomdirekt.de
			web  : www.pandacomdirekt.de"
		DESCRIPTION "Revision 1.0"

		REVISION "1312120000Z"
		DESCRIPTION "Revision 5.2.0
			- change of indexes
			- corrective actions"
		::= { converter 2 }

--*******************************************************************

	convSSLXFPModuleOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModuleOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"SPEED-SINGLELINE XFP Module Overview Table"
		::= { convSpeedSingleLineXFP 1 }

	convSSLXFPModuleOverviewEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModuleOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module Overview Entries"
		INDEX { convSSLXFPMSlot }
		::= { convSSLXFPModuleOverviewTable 1 }

	ConvSSLXFPModuleOverviewEntry ::=
		SEQUENCE
		{
			convSSLXFPMSlot INTEGER,
			convSSLXFPMDevice INTEGER,
			convSSLXFPMStatus INTEGER,
			convSSLXFPMSysUpTime TimeTicks,
			convSSLXFPMTemp INTEGER,
			convSSLXFPMAlarmState INTEGER,
			convSSLXFPMSerialNumber DisplayString
		}

	convSSLXFPMSlot OBJECT-TYPE
		SYNTAX INTEGER (1..17)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION  "Slot number in Carrier"
		::= { convSSLXFPModuleOverviewEntry 2 }

	convSSLXFPMDevice OBJECT-TYPE
		SYNTAX INTEGER
		{
			devSpeedSingleLineXFP3R (4),
			devSpeedSingleLineXFP (5),
			devunknown (255)
		}
			MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Module DeviceType"
		::= { convSSLXFPModuleOverviewEntry 3 }

        convSSLXFPMStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			running (0),
			resetSoftware (1),
			resetConfig (2),
			resetCAN (3),
			resetHardware (4),
			unknown (255)
		}
		MAX-ACCESS  read-write
		STATUS  current
		DESCRIPTION
				"Reset States of Module"
		::= { convSSLXFPModuleOverviewEntry 4 }

	convSSLXFPMSysUpTime OBJECT-TYPE
		SYNTAX TimeTicks
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"System Up Time in Seconds"
		::= { convSSLXFPModuleOverviewEntry 5 }

        convSSLXFPMTemp OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Module Temperature"
		::= { convSSLXFPModuleOverviewEntry 6 }

	convSSLXFPMAlarmState OBJECT-TYPE
		SYNTAX INTEGER
		{
			noAlarm (0),
			activeAlarmsH1 (1),
			cdrAlarmRxP1 (2),
			activeAlarmsH3 (3),
			cdrAlarmTxP1 (4),
			activeAlarmsH5 (5),
			cdrAlarmRxP1TxP1 (6),
			activeAlarmsH7 (7),
			cdrAlarmRxP2 (32),
			activeAlarmsH33 (33),
			cdrAlarmRxP2RxP1 (34),
			activeAlarmsH35 (35),
			cdrAlarmRxP2TxP1 (36),
			activeAlarmsH37 (37),
			cdrAlarmRxP2RxP1TxP1 (38),
			activeAlarmsH39 (39),
			cdrAlarmTxP2 (64),
			activeAlarmsH65 (65),
			cdrAlarmTxP2RxP1 (66),
			activeAlarmsH67 (67),
			cdrAlarmTxP2TxP1 (68),
			activeAlarmsH69 (69),
			cdrAlarmTxP2RxP1TxP1 (70),
			activeAlarmsH71 (71),
			cdrAlarmRxP2TxP2 (96),
			activeAlarmsH97 (97),
			cdrAlarmRxP2TxP2RxP1 (98),
			activeAlarmsH99 (99),
			cdrAlarmRxP2TxP2TxP1 (100),
			activeAlarmsH101 (101),
			cdrAlarmRxP2TxP2RxP1TxP1 (102),
			activeAlarmsH103 (103),
			unknown (255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Module Alarm States, if there are active see
			Event-Table. The activeAlarms with extension HXX means
			a internal HEX representative of the alarm."
		::= { convSSLXFPModuleOverviewEntry 7 }

        convSSLXFPMSerialNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..17))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Modules Serial Number"
		::= { convSSLXFPModuleOverviewEntry 8 }

-- *********************************
-- ConvSSLXFPModuleImagesOverview

	convSSLXFPModuleImagesOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModuleImagesOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"SPEED-SINGLELINE XFP Module Images Table"
		::= { convSpeedSingleLineXFP 2 }

	convSSLXFPModuleImagesOverviewEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModuleImagesOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"Module Images Overview Entries"
		INDEX { convSSLXFPMSlot }
		::= { convSSLXFPModuleImagesOverviewTable 1 }

	ConvSSLXFPModuleImagesOverviewEntry ::=
		SEQUENCE
		{
			convSSLXFPMSlot			INTEGER,
			convSSLXFPSWBootImage		DisplayString,
			convSSLXFPSWAppImage1		DisplayString,
			convSSLXFPSWAppImage2		DisplayString,
			convSSLXFPSWUploadStatus	INTEGER,
			convSSLXFPSWUpdateStatus	INTEGER,
			convSSLXFPMHWVersion		DisplayString
		}

	convSSLXFPSWBootImage OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..36))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Identification of Bootimage"
		::= { convSSLXFPModuleImagesOverviewEntry 3 }

	convSSLXFPSWAppImage1 OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..36))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Identification of Application Image1"
		::= { convSSLXFPModuleImagesOverviewEntry 4 }

	convSSLXFPSWAppImage2 OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..36))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Identification of Application Image2"
		::= { convSSLXFPModuleImagesOverviewEntry 5 }

	convSSLXFPSWUploadStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			ready (0),
			startUpload (1),
			uploadActive (2),
			uploadFailure (3),
			notAvailable (255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Control and Status of UploadProcedure"
		::= { convSSLXFPModuleImagesOverviewEntry 6 }


	convSSLXFPSWUpdateStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			idle (0),
			activateImage1 (1),
			activateImage2 (2),
			notAvailable (255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"activates SW-Image after netxt reset"
		::= { convSSLXFPModuleImagesOverviewEntry 7 }

	convSSLXFPMHWVersion OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..36))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"Identification of Hardware Version"
		::= { convSSLXFPModuleImagesOverviewEntry 8 }


-- *********************************

	convSSLXFPModuleBoardConfigTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModuleBoardConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"SPEED-SINGLELINE XFP Module config Table"
		::= { convSpeedSingleLineXFP 3 }

	convSSLXFPModuleBoardConfigEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModuleBoardConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module Overview Entries"
		INDEX { convSSLXFPMSlot }
		::= { convSSLXFPModuleBoardConfigTable 1 }

	ConvSSLXFPModuleBoardConfigEntry ::=
		SEQUENCE
		{
			convSSLXFPMSlot INTEGER,
			convSSLXFPMPortSpeedConfig INTEGER,
			convSSLXFPModuleTempHighWarning INTEGER,
			convSSLXFPModuleTempHighAlarm INTEGER,
			convSSLXFPModuleCliTimeout INTEGER,
			convSSLXFPModuleEthPortConfig INTEGER,
			convSSLXFPModuleEthPortState INTEGER
		}

	convSSLXFPMPortSpeedConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			stm64 (0),
			stm64rs238 (1),
			stm64rs237 (2),
			ethernet10g64b66b (3),
			ethernet10g237RS (4),
			ethernet10g238RS (5),
			fibreChannel10G64B66B (6),
			fibreChannel10G237RS (7),
			fibreChannel10G238RS (8),
			notAvalilable (255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port data rate configuration"
		::= { convSSLXFPModuleBoardConfigEntry 3 }

	convSSLXFPModuleTempHighWarning OBJECT-TYPE
		SYNTAX INTEGER
		{
			notImplemented (0)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This parameter is not implemented at the moment."
		::= { convSSLXFPModuleBoardConfigEntry 4 }

	convSSLXFPModuleTempHighAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvalilable (0)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This parameter is not implemented at the moment."
		::= { convSSLXFPModuleBoardConfigEntry 5 }

	convSSLXFPModuleCliTimeout OBJECT-TYPE
		SYNTAX INTEGER (120..3600)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"time without user interaction before exiting CLI. Value in seconds."
		::= { convSSLXFPModuleBoardConfigEntry 6 }

	convSSLXFPModuleEthPortConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvalilable (0),
			portDown (1),
			portUp (2)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Ethernet port state of Transponder card"
		::= { convSSLXFPModuleBoardConfigEntry 7 }

	convSSLXFPModuleEthPortState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvalilable (0),
			portDown (1),
			portUp (2)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Ethernet port config of Transponder card"
		::= { convSSLXFPModuleBoardConfigEntry 8 }

-- ****************************
-- ConvSSLXFPModulePortOverview
	convSSLXFPPortOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPPortOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"SPEED-SINGLELINE XFP port overview table"
		::= { convSpeedSingleLineXFP 4 }

	convSSLXFPPortOverviewEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPPortOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"port overview entries"
		INDEX { pIndex }
		::= { convSSLXFPPortOverviewTable 1 }

	ConvSSLXFPPortOverviewEntry ::=
		SEQUENCE
		{
			pIndex INTEGER,
			convSSLXFPPSlot INTEGER,
			convSSLXFPPPort INTEGER,
			convSSLXFPMPortDes DisplayString,
			convSSLXFPMPortAdminState INTEGER,
			convSSLXFPMPortXFPState INTEGER,
			convSSLXFPMPortTXOperState INTEGER,
			convSSLXFPMPortRXOperState INTEGER,
			convSSLXFPMPortAlarmState INTEGER
		}

	pIndex OBJECT-TYPE
		SYNTAX INTEGER (0..17)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port index"
		::= { convSSLXFPPortOverviewEntry 1 }

	convSSLXFPPSlot OBJECT-TYPE
		SYNTAX INTEGER (0..17)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"slot number of port"
		::= { convSSLXFPPortOverviewEntry 2 }

	convSSLXFPPPort OBJECT-TYPE
		SYNTAX INTEGER (0..34)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port number"
		::= { convSSLXFPPortOverviewEntry 3 }

	convSSLXFPMPortDes OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port description or port name"
		::= { convSSLXFPPortOverviewEntry 4 }

	convSSLXFPMPortAdminState OBJECT-TYPE
		SYNTAX INTEGER
		{
			adminDown (0),
			adminUp (1),
			notAvalilable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"administrativ port status"
		::= { convSSLXFPPortOverviewEntry 5 }

	convSSLXFPMPortXFPState OBJECT-TYPE
		SYNTAX INTEGER
		{
			xfpRemoved (0),
			xfpInstalled (1),
			xfpTxFault (2),
			notAvalilable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP installed / alarm status"
		::= { convSSLXFPPortOverviewEntry 6 }

	convSSLXFPMPortTXOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			down(0),
			up(1),
			loop(2),
			downLLCF(3),
			downTxFault(4),
			downTxLevel(5),
			bertRunning(6),
			notAvalilable(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP operational/alarm status"
		::= { convSSLXFPPortOverviewEntry 7 }

	convSSLXFPMPortRXOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			down(0),
			up(1),
			loop(2),
			downLLCF(3),
			downRxFault(4),
			downRxLevel(5),
			bertRunning(6),
			notAvalilable(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP operational/alarm status"
		::= { convSSLXFPPortOverviewEntry 8 }

	convSSLXFPMPortAlarmState OBJECT-TYPE
		SYNTAX INTEGER
		{
			noAlarm (0),
			activeAlarms (1),
			notAvailable (255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"Port alarm states"
		::= { convSSLXFPPortOverviewEntry 9 }


--********************************************

	convSSLXFPModulePortConfigTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModulePortConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"SPEED-SINGLELINE XFP port config table"
		::= { convSpeedSingleLineXFP 5 }

	convSSLXFPModulePortConfigEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModulePortConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"port config Entries"
		INDEX { pIndex }
		::= { convSSLXFPModulePortConfigTable 1 }

	ConvSSLXFPModulePortConfigEntry ::=
		SEQUENCE
		{
			convSSLXFPPSlot INTEGER,
			convSSLXFPPPort	INTEGER,
			convSSLXFPMPortAdminConfig INTEGER,
			convSSLXFPMPortDescription DisplayString,
			convSSLXFPMPortLLCFConfig INTEGER,
			convSSLXFPMPortLoopConfig INTEGER,
			convSSLXFPMPortAlarmDeactivation INTEGER,
			convSSLXFPMPortAlarmSchedule INTEGER,
			convSSLXFPMPortOTNConfig INTEGER,
			convSSLXFPMPortOTNMapping INTEGER
		}

	convSSLXFPMPortAdminConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			adminDown (0),
			adminUp (1),
			notAvalilable (255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port administrative configuration"
		::= { convSSLXFPModulePortConfigEntry 4 }

	convSSLXFPMPortDescription OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port description or port name configuration"
		::= { convSSLXFPModulePortConfigEntry 5 }

	convSSLXFPMPortLLCFConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			off(0),
			on(1),
			notAvalilable (255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Link Loss Carry Forward config"
		::= { convSSLXFPModulePortConfigEntry 6 }

	convSSLXFPMPortLoopConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			off(0),
			externalLoop(1),
			internalLoop(2),
			notAvalilable (255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port loop configuration"
		::= { convSSLXFPModulePortConfigEntry 7 }

	convSSLXFPMPortAlarmDeactivation OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			alarmReportingEnabled(1),
			alarmReportingDisabledbySchedule(2),
			alarmReportingDisabledPermanent(3),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule"
		::= { convSSLXFPModulePortConfigEntry 8 }

	convSSLXFPMPortAlarmSchedule OBJECT-TYPE
		SYNTAX INTEGER (0..1200)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule. Value in hours.
			After this time has elapsed, the alarms are active
			again."
		::= { convSSLXFPModulePortConfigEntry 9 }

	convSSLXFPMPortOTNConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			otnBypass(1),
			otnWithFEC(2),
			otnWithoutFEC(3)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"OTN Transceiver configuration"
		::= { convSSLXFPModulePortConfigEntry 10 }

	convSSLXFPMPortOTNMapping OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			otnFixedByteStuffing(1),
			otnWithoutFixedByteStuffing(2)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule"
		::= { convSSLXFPModulePortConfigEntry 11 }

--***************************************
-- ConvSSLXFPModulePortGeneralXFPInfos

	convSSLXFPModulePortGeneralXFPInfosTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModulePortGeneralXFPInfosEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"SPEED-SINGLELINE XFP general information table"
		::= { convSpeedSingleLineXFP 6 }

	convSSLXFPModulePortGeneralXFPInfosEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModulePortGeneralXFPInfosEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"XFP general information Entries"
		INDEX { pIndex }
		::= { convSSLXFPModulePortGeneralXFPInfosTable 1 }

	ConvSSLXFPModulePortGeneralXFPInfosEntry ::=
		SEQUENCE
		{
			convSSLXFPPSlot			INTEGER,
			convSSLXFPPPort			INTEGER,
			convSSLXFPMPortXFPPowerclass	INTEGER,
			convSSLXFPMPortXFPSmFiberLength	INTEGER,
			convSSLXFPMPortVendorName	DisplayString,
			convSSLXFPMPortSerialNumber	DisplayString,
			convSSLXFPMPortWavelength	DisplayString,
			convSSLXFPMPortPartNumber	DisplayString
		}

	convSSLXFPMPortXFPPowerclass OBJECT-TYPE
		SYNTAX INTEGER
		{
			upTo1-5W (1),
			upTo2-5W (2),
			upTo3-5W (3),
			greater3-5W (4),
			notAvalilable (255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"power class - max power consumption"
		::= { convSSLXFPModulePortGeneralXFPInfosEntry 4 }

	convSSLXFPMPortXFPSmFiberLength OBJECT-TYPE
		SYNTAX INTEGER (0..255)
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"max single mode fiber length"
		::= { convSSLXFPModulePortGeneralXFPInfosEntry 5 }

	convSSLXFPMPortVendorName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..16))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP vendor name"
		::= { convSSLXFPModulePortGeneralXFPInfosEntry 6 }

	convSSLXFPMPortSerialNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..16))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP serial number"
		::= { convSSLXFPModulePortGeneralXFPInfosEntry 7 }

	convSSLXFPMPortWavelength OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..8))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP center wavelength at romm temperature"
		::= { convSSLXFPModulePortGeneralXFPInfosEntry 8 }

	convSSLXFPMPortPartNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..16))
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP part number"
		::= { convSSLXFPModulePortGeneralXFPInfosEntry 9 }

-- ****************************************
-- ConvSSLXFPModulePortXFPMessurement

	convSSLXFPModulePortXFPMessurementTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModulePortXFPMessurementEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"SPEED-SINGLELINE XFP messurement table"
		::= { convSpeedSingleLineXFP 7 }

	convSSLXFPModulePortXFPMessurementEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModulePortXFPMessurementEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"XFP messurement Entries"
		INDEX { pIndex }
		::= { convSSLXFPModulePortXFPMessurementTable 1 }

	ConvSSLXFPModulePortXFPMessurementEntry ::=
		SEQUENCE
		{
			convSSLXFPPSlot INTEGER,
			convSSLXFPPPort INTEGER,
			convSSLXFPMPortRxPower INTEGER,
			convSSLXFPMPortTxPower INTEGER,
			convSSLXFPMPortXFPTemp INTEGER,
			convSSLXFPMPortTxBias INTEGER,
			convSSLXFPMPortFECRate INTEGER
		}

	convSSLXFPMPortRxPower OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP optical receive power"
		::= { convSSLXFPModulePortXFPMessurementEntry 4 }

	convSSLXFPMPortTxPower OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP optical transmit power"
		::= { convSSLXFPModulePortXFPMessurementEntry 5 }

	convSSLXFPMPortXFPTemp OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"XFP temperature"
		::= { convSSLXFPModulePortXFPMessurementEntry 6 }

	convSSLXFPMPortTxBias OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS  current
		DESCRIPTION
			"XFP TX Bias"
		::= { convSSLXFPModulePortXFPMessurementEntry 7 }

	convSSLXFPMPortFECRate OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Forward error correction error rate. The given value is the exponent 10^-x"
		::= { convSSLXFPModulePortXFPMessurementEntry 8 }

-- **************************************
-- ConvSSLXFPModuleThresholdsConfig

	convSSLXFPModuleThresholdsConfigTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModuleThresholdsConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"SPEED-SINGLELINE XFP Threshold config table"
		::= { convSpeedSingleLineXFP 8 }

	convSSLXFPModuleThresholdsConfigEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModuleThresholdsConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
				"XFP threshold Entries"
		INDEX { pIndex }
		::= { convSSLXFPModuleThresholdsConfigTable 1 }

	ConvSSLXFPModuleThresholdsConfigEntry ::=
		SEQUENCE
		{
			convSSLXFPPSlot INTEGER,
			convSSLXFPPPort	INTEGER,
			convSSLXFPMPortRxLowAlarmLevel INTEGER,
			convSSLXFPMPortRxHighAlarmLevel INTEGER,
			convSSLXFPMPortRxLowWarningLevel INTEGER,
			convSSLXFPMPortRxHighWarningLevel INTEGER,
			convSSLXFPMPortTxLowAlarmLevel INTEGER,
			convSSLXFPMPortTxHighAlarmLevel INTEGER,
			convSSLXFPMPortTxLowWarningLevel INTEGER,
			convSSLXFPMPortTxHighWarningLevel INTEGER,
			convSSLXFPMPortTxBiasLowAlarmLevel INTEGER,
			convSSLXFPMPortTxBiasHighAlarmLevel INTEGER,
			convSSLXFPMPortTxBiasLowWarningLevel INTEGER,
			convSSLXFPMPortTxBiasHighWarningLevel INTEGER,
			convSSLXFPMPortTempLowAlarmLevel INTEGER,
			convSSLXFPMPortTempHighAlarmLevel INTEGER,
			convSSLXFPMPortTempLowWarningLevel INTEGER,
			convSSLXFPMPortTempHighWarningLevel INTEGER
		}

	convSSLXFPMPortRxLowAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP receiver input low alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 4 }

	convSSLXFPMPortRxHighAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP receiver input high alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 5 }

	convSSLXFPMPortRxLowWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP receiver input low warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 6 }

	convSSLXFPMPortRxHighWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP receiver input high warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 7 }

	convSSLXFPMPortTxLowAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter output low alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 8 }

	convSSLXFPMPortTxHighAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter output high alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 9 }

	convSSLXFPMPortTxLowWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter output low warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 10 }

	convSSLXFPMPortTxHighWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter output high warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 11 }

	convSSLXFPMPortTxBiasLowAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter bias low alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 12 }

	convSSLXFPMPortTxBiasHighAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter bias high alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 13 }

	convSSLXFPMPortTxBiasLowWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter bias low warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 14 }

	convSSLXFPMPortTxBiasHighWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP transmitter bias high warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 15 }

	convSSLXFPMPortTempLowAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP temperature low alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 16 }

	convSSLXFPMPortTempHighAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP temperature high alarm level"
		::= { convSSLXFPModuleThresholdsConfigEntry 17 }

	convSSLXFPMPortTempLowWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP temperature low warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 18 }

	convSSLXFPMPortTempHighWarningLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
				"XFP temperature high warning level"
		::= { convSSLXFPModuleThresholdsConfigEntry 19 }

-- **************************************
-- ConvSSLXFPModuleEventTable

	convSSLXFPModuleEventTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPModuleEventTableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"SPEED-SINGLELINE XFP Threshold config table"
		::= { convSpeedSingleLineXFP 9 }

	convSSLXFPModuleEventTableEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPModuleEventTableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"XFP threshold Entries"
		INDEX { pIndex }
		::= { convSSLXFPModuleEventTable 1 }

	ConvSSLXFPModuleEventTableEntry ::=
		SEQUENCE
		{
			convSSLXFPPSlot INTEGER,
			convSSLXFPPPort	INTEGER,
			convSSLXFPPPortRxLowAlarmEvent INTEGER,
			convSSLXFPPPortRxHighAlarmEvent INTEGER,
			convSSLXFPPPortRxLowWarningEvent INTEGER,
			convSSLXFPPPortRxHighWarningEvent INTEGER,
			convSSLXFPPPortTxLowAlarmEvent INTEGER,
			convSSLXFPPPortTxHighAlarmEvent INTEGER,
			convSSLXFPPPortTxLowWarningEvent INTEGER,
			convSSLXFPPPortTxHighWarningEvent INTEGER,
			convSSLXFPPPortTxBiasLowAlarmEvent INTEGER,
			convSSLXFPPPortTxBiasHighAlarmEvent INTEGER,
			convSSLXFPPPortTxBiasLowWarningEvent INTEGER,
			convSSLXFPPPortTxBiasHighWarningEvent INTEGER,
			convSSLXFPPPortTempLowAlarmEvent INTEGER,
			convSSLXFPPPortTempHighAlarmEvent INTEGER,
			convSSLXFPPPortTempLowWarningEvent INTEGER,
			convSSLXFPPPortTempHighWarningEvent INTEGER,
			convSSLXFPPPortOtnAlarmEvent INTEGER
		}

	convSSLXFPPPortRxLowAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP receiver input low alarm event"
		::= { convSSLXFPModuleEventTableEntry 4 }

	convSSLXFPPPortRxHighAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP receiver input high alarm event"
		::= { convSSLXFPModuleEventTableEntry 5 }

	convSSLXFPPPortRxLowWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP receiver input low warning event"
		::= { convSSLXFPModuleEventTableEntry 6 }

	convSSLXFPPPortRxHighWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP receiver input high warning event"
		::= { convSSLXFPModuleEventTableEntry 7 }

	convSSLXFPPPortTxLowAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter output low alarm event"
		::= { convSSLXFPModuleEventTableEntry 8 }

	convSSLXFPPPortTxHighAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter output high alarm event"
		::= { convSSLXFPModuleEventTableEntry 9 }

	convSSLXFPPPortTxLowWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter output low warning event"
		::= { convSSLXFPModuleEventTableEntry 10 }

	convSSLXFPPPortTxHighWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter output high warning event"
		::= { convSSLXFPModuleEventTableEntry 11 }

	convSSLXFPPPortTxBiasLowAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter bias low alarm event"
		::= { convSSLXFPModuleEventTableEntry 12 }

	convSSLXFPPPortTxBiasHighAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter bias high alarm event"
		::= { convSSLXFPModuleEventTableEntry 13 }

	convSSLXFPPPortTxBiasLowWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter bias low warning event"
		::= { convSSLXFPModuleEventTableEntry 14 }

	convSSLXFPPPortTxBiasHighWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP transmitter bias high warning event"
		::= { convSSLXFPModuleEventTableEntry 15 }

	convSSLXFPPPortTempLowAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP temperature low alarm event"
		::= { convSSLXFPModuleEventTableEntry 16 }

	convSSLXFPPPortTempHighAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP temperature high alarm event"
		::= { convSSLXFPModuleEventTableEntry 17 }

	convSSLXFPPPortTempLowWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP temperature low warning event"
		::= { convSSLXFPModuleEventTableEntry 18 }

	convSSLXFPPPortTempHighWarningEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1),
			notAvailable (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP temperature high warning event"
		::= { convSSLXFPModuleEventTableEntry 19 }

	convSSLXFPPPortOtnAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			normal (0),
			active (1)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XFP OTN Alarm event"
		::= { convSSLXFPModuleEventTableEntry 20 }

--*************************************

	convSSLXFPPortTunableTable OBJECT-TYPE
		SYNTAX SEQUENCE OF ConvSSLXFPPortTunableTableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC tunable transceiver table"
		::= { convSpeedSingleLineXFP 10 }

	convSSLXFPPortTunableTableEntry OBJECT-TYPE
		SYNTAX ConvSSLXFPPortTunableTableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"transceiver tunable entries"
		INDEX { pIndex }
		::= { convSSLXFPPortTunableTable 1 }

	ConvSSLXFPPortTunableTableEntry ::=
		SEQUENCE
		{
			convSSLXFPPSlot INTEGER,
			convSSLXFPPPort	INTEGER,
			convSSLXFPPortXCVChannelSpacing INTEGER,
			convSSLXFPPortXCVNumberOfChannels INTEGER,
			convSSLXFPPortXCVCenterWavlength INTEGER,
			convSSLXFPPortXCVTunableFeature INTEGER,
			convSSLXFPPortXCVTunableMinMaxChannel DisplayString,
			convSSLXFPPortXCVTunableWavelengthConfig INTEGER,
			convSSLXFPPortXCVTunableChannelConfig DisplayString,
			convSSLXFPPortXCVTunableConfigSelection INTEGER
		}

	convSSLXFPPortXCVChannelSpacing OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV channel spacing"
		::= { convSSLXFPPortTunableTableEntry 4 }

	convSSLXFPPortXCVNumberOfChannels OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV supported number channels"
		::= { convSSLXFPPortTunableTableEntry 5 }

	convSSLXFPPortXCVCenterWavlength OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV center wavelength"
		::= { convSSLXFPPortTunableTableEntry 6 }

	convSSLXFPPortXCVTunableFeature OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable (0),
			notTunable (1),
			byWavelength (2),
			byChannel (4),
			byChannelAndWavelength (6)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"is transceiver tunable?"
		::= { convSSLXFPPortTunableTableEntry 7 }

	convSSLXFPPortXCVTunableMinMaxChannel OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..9))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Set parameter for transceiver channel config. "
		::= { convSSLXFPPortTunableTableEntry 8 }

	convSSLXFPPortXCVTunableWavelengthConfig OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"XCV wavelength control. Min value is 1528000 and max value is 1564000. Wavelength value in units of picometer!"
		::= { convSSLXFPPortTunableTableEntry 9 }

	convSSLXFPPortXCVTunableChannelConfig OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..4))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Set parameter for transceiver channel config. Allowed channels are from C1..H61. 'C' represents the 100GHz channel and 'H' is 50 GHz above the corresponding 100GHz channel."
		::= { convSSLXFPPortTunableTableEntry 10 }

	convSSLXFPPortXCVTunableConfigSelection OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			xcvInternal(1),
			configFile(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"selects which config should be used (internal XCV or transponder card config)"
		::= { convSSLXFPPortTunableTableEntry 11 }


END