SPEED-DUALLINE-FC DEFINITIONS ::= BEGIN

--*****************************************************************************************
--*****   Version History   ***************************************************************
--=========================================================================================

--V0.0  14.12.2009 ML: Erste Version SPEED-DUALLINE-FC
--Supported Modules:
--
--*****************************************************************************************

IMPORTS
	DisplayString	FROM RFC1213-MIB
	OBJECT-TYPE	FROM RFC-1212
	TRAP-TYPE	FROM RFC-1215
	enterprises, IpAddress, TimeTicks, MODULE-IDENTITY	FROM SNMPv2-SMI
	PanDacom	FROM PanDacom-MIB
	nmSPEEDCARRIER, converter	FROM SPEEDCARRIER-MIB
; -- END of IMPORTS

--*******************************************************************

	speedDuallineFC MODULE-IDENTITY
		LAST-UPDATED "1312120000Z"
		ORGANIZATION "Pan Dacom Direkt GmbH"
		CONTACT-INFO
			"Pan Dacom Direkt GmbH
			Dreieich Plaza 1B
			63303 Dreieich
			Germany
			Tel. : +49 6103/932-333
			Fax. : +49 6103/932-444
			email: kontakt@pandacomdirekt.de
			web  : www.pandacomdirekt.de"
		DESCRIPTION "Revision 1.0"

		REVISION "1312120000Z"
		DESCRIPTION "Revision 5.2.0
		- change of table indexes
		- corrective actions "

		::= { converter 3 }

--*******************************************************************

	speedDuallineFCMOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCMOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC Module Overview table"
		::= { speedDuallineFC 1 }

	speedDuallineFCMOverviewEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCMOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module Overview entries"
		INDEX { speedDuallineFCMSlot }
		::= { speedDuallineFCMOverviewTable 1 }

	SpeedDuallineFCMOverviewEntry ::=
		SEQUENCE
		{
			speedDuallineFCMSlot INTEGER,
			speedDuallineFCMDevice INTEGER,
			speedDuallineFCMState INTEGER,
			speedDuallineFCMSysName DisplayString,
			speedDuallineFCMSysUpTime TimeTicks,
			speedDuallineFCMTemperature INTEGER,
			speedDuallineFCMAlarmState INTEGER,
			speedDuallineFCMKernelImage DisplayString,
			speedDuallineFCMAppImage DisplayString,
			speedDuallineFCMHwVersion DisplayString,
			speedDuallineFCMSerialNumber DisplayString,
			speedDuallineFCMEthPortState INTEGER,
			speedDuallineFCMUploadState INTEGER,
			speedDuallineFCMUpdateState INTEGER
		}

	speedDuallineFCMSlot OBJECT-TYPE
		SYNTAX INTEGER (1..17)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Slot number"
		::= { speedDuallineFCMOverviewEntry 2 }

	speedDuallineFCMDevice OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			speedDuallineFCXFP(6),
			speedDuallineFCSFP(7),
			speedDualline10GXFP(8),
			speedDualline10GSFP(9),
			speedDualline16GXFP(10),
			speedDualline16GSFP(11),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"device type"
		::= { speedDuallineFCMOverviewEntry 3 }

	speedDuallineFCMState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			running(1),
			resetSoftware(2),
			resetConfig(3),
			resetCAN(4),
			resetHardware(5),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Device oper state. If setting resetConfig, you also have to reset the hardware."
		::= { speedDuallineFCMOverviewEntry 4 }

	speedDuallineFCMSysName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Modules name or description"
		::= { speedDuallineFCMOverviewEntry 5 }

	speedDuallineFCMSysUpTime OBJECT-TYPE
		SYNTAX TimeTicks
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"System Up Time in Seconds"
		::= { speedDuallineFCMOverviewEntry 6 }

	speedDuallineFCMTemperature OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Board temperature"
		::= { speedDuallineFCMOverviewEntry 7 }

	speedDuallineFCMAlarmState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"global device alarm state"
		::= { speedDuallineFCMOverviewEntry 8 }

	speedDuallineFCMKernelImage OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"kernel version"
		::= { speedDuallineFCMOverviewEntry 9 }

	speedDuallineFCMAppImage OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"software version"
		::= { speedDuallineFCMOverviewEntry 10 }

	speedDuallineFCMHwVersion OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..17))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"board hardware version"
		::= { speedDuallineFCMOverviewEntry 11 }

	speedDuallineFCMSerialNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..17))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"board serial number"
		::= { speedDuallineFCMOverviewEntry 12 }

	speedDuallineFCMEthPortState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			linkDown(1),
			hdx10(2),
			fdx10(3),
			hdx100(4),
			fdx100(5),
			off(6),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Ethernet Port State (copper management port)"
		::= { speedDuallineFCMOverviewEntry 13 }


	speedDuallineFCMUploadState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			ready(1),
			startUpload(2),
			uploadActive(3),
			uploadFailure(4),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"software update state"
		::= { speedDuallineFCMOverviewEntry 14 }

	speedDuallineFCMUpdateState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			idle(1),
			activateKernel (2),
			activateApplication (3),
			unknown(255)
		}
		MAX-ACCESS  read-only
		STATUS  current
		DESCRIPTION
			"software update state"
		::= { speedDuallineFCMOverviewEntry 15 }

-- *********************************

	speedDuallineFCMConfigTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCMConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC module config table"
		::= { speedDuallineFC 2 }

	speedDuallineFCMConfigEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCMConfigEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module config entries"
		INDEX { speedDuallineFCMSlot }
		::= { speedDuallineFCMConfigTable 1 }

	SpeedDuallineFCMConfigEntry ::=
		SEQUENCE
		{
			speedDuallineFCMSlot INTEGER,
			speedDuallineFCMIpAddress IpAddress,
			speedDuallineFCMIpNetmask IpAddress,
			speedDuallineFCMIpGateway IpAddress,
			speedDuallineFCMTrapSink1 IpAddress,
			speedDuallineFCMTrapSink2 IpAddress,
			speedDuallineFCMTrapSink3 IpAddress,
			speedDuallineFCMTrapSink4 IpAddress,
			speedDuallineFCMTrapSink5 IpAddress,
			speedDuallineFCMSNMPReadCommunity DisplayString,
			speedDuallineFCMSNMPWriteCommunity DisplayString,
			speedDuallineFCMTempWarningLevel INTEGER,
			speedDuallineFCMTempAlarmLevel INTEGER,
			speedDuallineFCMSNMPSyscontact DisplayString,
			speedDuallineFCMSNMPSyslocation DisplayString,
			speedDuallineFCMPortTxConnection INTEGER,
			speedDuallineFCMUserTimeout INTEGER,
			speedDuallineFCMEthPortMode INTEGER,
			speedDuallineFCMAccess INTEGER
		}

	speedDuallineFCMIpAddress OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"device IP-address"
		DEFVAL { 'c0a80066'H }	-- 192.168.0.102
		::= { speedDuallineFCMConfigEntry 3 }

	speedDuallineFCMIpNetmask OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"device IP-mask"
		DEFVAL { 'ffffff00'H }	-- 255.255.255.0
		::= { speedDuallineFCMConfigEntry 4 }

	speedDuallineFCMIpGateway OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"device default gateway"
		::= { speedDuallineFCMConfigEntry 5 }

	speedDuallineFCMTrapSink1 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 1"
		::= { speedDuallineFCMConfigEntry 6 }

	speedDuallineFCMTrapSink2 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 2"
		::= { speedDuallineFCMConfigEntry 7 }

	speedDuallineFCMTrapSink3 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 3"
		::= { speedDuallineFCMConfigEntry 8 }

	speedDuallineFCMTrapSink4 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 4"
		::= { speedDuallineFCMConfigEntry 9 }

	speedDuallineFCMTrapSink5 OBJECT-TYPE
		SYNTAX IpAddress
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp trapsink 5"
		::= { speedDuallineFCMConfigEntry 10 }

	speedDuallineFCMSNMPReadCommunity OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp read community"
		::= { speedDuallineFCMConfigEntry 11 }

	speedDuallineFCMSNMPWriteCommunity OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp write community"
		::= { speedDuallineFCMConfigEntry 12 }

	speedDuallineFCMTempWarningLevel OBJECT-TYPE
		SYNTAX INTEGER (5..60)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"high temperature warning level"
		::= { speedDuallineFCMConfigEntry 13 }

	speedDuallineFCMTempAlarmLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"high temperature alarm level"
		::= { speedDuallineFCMConfigEntry 14 }

	speedDuallineFCMSNMPSyscontact OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp syscontact"
		::= { speedDuallineFCMConfigEntry 15 }

	speedDuallineFCMSNMPSyslocation OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"snmp syslocation"
		::= { speedDuallineFCMConfigEntry 16 }

	speedDuallineFCMPortTxConnection OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			connect1to3and2to4(1),
			connect1to4and2to3(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port tx connection"
		::= { speedDuallineFCMConfigEntry 17 }

	speedDuallineFCMUserTimeout OBJECT-TYPE
		SYNTAX INTEGER (120..3600)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"CLI user timeout. Valid from 120 to 3600 seconds."
		::= { speedDuallineFCMConfigEntry 18 }

	speedDuallineFCMEthPortMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			autoneg(1),
			hdx10(2),
			fdx10(3),
			hdx100(4),
			fdx100(5),
			off(6),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Admin config for Ethernet port on FC card."
		::= { speedDuallineFCMConfigEntry 19 }

	speedDuallineFCMAccess OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			off(1),
			telnet(2),
			ssh2(3),
			notImplemented(254),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"access method to this system"
		::= { speedDuallineFCMConfigEntry 20 }

-- *********************************

	speedDuallineFCMProtectionTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCMProtectionEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC module Protection table"
		::= { speedDuallineFC 3 }

	speedDuallineFCMProtectionEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCMProtectionEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module Protection entries"
		INDEX { speedDuallineFCMSlot }
		::= { speedDuallineFCMProtectionTable 1 }

	SpeedDuallineFCMProtectionEntry ::=
		SEQUENCE
		{
			speedDuallineFCMSlot INTEGER,
			speedDuallineFCMLinkProtectionConfig INTEGER,
			speedDuallineFCMLinkProtectionState INTEGER,
			speedDuallineFCMLinkProtectionFallbackTime INTEGER,
			speedDuallineFCMLinkProtectionRXLevelPort1 INTEGER,
			speedDuallineFCMLinkProtectionRXLevelPort2 INTEGER,
			speedDuallineFCMLinkProtectionClientPort INTEGER,
			speedDuallineFCMLinkProtectionMode INTEGER
		}

	speedDuallineFCMLinkProtectionConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			unknown(0),
			protectionOFF(1),
			protectionOn(2),
			notAvailable(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"enable/disable the link protection"
		::= { speedDuallineFCMProtectionEntry 3 }

	speedDuallineFCMLinkProtectionState OBJECT-TYPE
		SYNTAX INTEGER
		{
			unknown(0),
			port1active(1),
			port2active(2),
			testingPort1(3),
			testingPort2(4),
			noneActive(5),
			notAvailable(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"link protection state"
		::= { speedDuallineFCMProtectionEntry 4 }

	speedDuallineFCMLinkProtectionFallbackTime OBJECT-TYPE
		SYNTAX INTEGER (5..3600)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"fallback time in seconds to main link."
		::= { speedDuallineFCMProtectionEntry 5 }

	speedDuallineFCMLinkProtectionRXLevelPort1 OBJECT-TYPE
		SYNTAX INTEGER (-4000..500)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"min RX-power level for switch over"
		::= { speedDuallineFCMProtectionEntry 6 }

	speedDuallineFCMLinkProtectionRXLevelPort2 OBJECT-TYPE
		SYNTAX INTEGER (-4000..500)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"min RX-power level for switch over"
		::= { speedDuallineFCMProtectionEntry 7 }

	speedDuallineFCMLinkProtectionClientPort OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			port3(1),
			port4(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"choose prefered client port"
		::= { speedDuallineFCMProtectionEntry 8 }

	speedDuallineFCMLinkProtectionMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			notavailable(0),
			fallbackPort1(1),
			fallbackPort2(2),
			staticPort1(3),
			staticPort2(4),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"protection working mode"
		::= { speedDuallineFCMProtectionEntry 9 }

-- *********************************

	speedDuallineFCPortOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCPortOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC port overview table"
		::= { speedDuallineFC 4 }

	speedDuallineFCPortOverviewEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCPortOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module port overview entries"
		INDEX { speedDuallineFCPortIndex }
		::= { speedDuallineFCPortOverviewTable 1 }

	SpeedDuallineFCPortOverviewEntry ::=
		SEQUENCE
		{
			speedDuallineFCPortIndex INTEGER,
			speedDuallineFCPortSlot INTEGER,
			speedDuallineFCPortPort INTEGER,
			speedDuallineFCPortDescription DisplayString,
			speedDuallineFCPortAdminConfig INTEGER,
			speedDuallineFCPortOperState INTEGER,
			speedDuallineFCPortXCVState INTEGER,
			speedDuallineFCPortLLCFconfig INTEGER,
			speedDuallineFCPortLoopConfig INTEGER,
			speedDuallineFCPortSpeedConfig INTEGER,
			speedDuallineFCPortAlarmState INTEGER,
			speedDuallineFCPortAlarmDeactivation INTEGER,
			speedDuallineFCPortAlarmSchedule  INTEGER
		}


	speedDuallineFCPortIndex OBJECT-TYPE
		SYNTAX INTEGER (1..1900)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Port Index"
		::= { speedDuallineFCPortOverviewEntry 1 }

	speedDuallineFCPortSlot OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Slot number"
		::= { speedDuallineFCPortOverviewEntry 2 }

	speedDuallineFCPortPort OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port number"
		::= { speedDuallineFCPortOverviewEntry 3 }

	speedDuallineFCPortDescription OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port description"
		::= { speedDuallineFCPortOverviewEntry 4 }

	speedDuallineFCPortAdminConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			adminDown(1),
			adminUp(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port admin config"
		::= { speedDuallineFCPortOverviewEntry 5 }

	speedDuallineFCPortOperState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			down(1),
			up(2),
			loop(3),
			downLLCF(4),
			downTxFault(5),
			downRxLevel(6),
			downTxLevel(7),
			bertRunnung(8),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port operational state"
		::= { speedDuallineFCPortOverviewEntry 6 }

	speedDuallineFCPortXCVState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			xcvRemoved(1),
			xcvInstalled(2),
			xcvTxFault(3),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver installation state"
		::= { speedDuallineFCPortOverviewEntry 7 }

	speedDuallineFCPortLLCFconfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			off(1),
			on(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port link loss cary forward config"
		::= { speedDuallineFCPortOverviewEntry 8 }

	speedDuallineFCPortLoopConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			off(1),
			on(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port loop config"
		::= { speedDuallineFCPortOverviewEntry 9 }

	speedDuallineFCPortSpeedConfig OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable (0),
			fibrechannel1G (1),
			fibrechannel2G (2),
			fibrechannel4G (3),
			fibrechannel8G (4),
			fibrechannel16G (5),
			sfp9930-11300 (6),
			bypass (16)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"port 3R speed in kbit/s"
		::= { speedDuallineFCPortOverviewEntry 10 }

	speedDuallineFCPortAlarmState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarms(1),
			activeAlarms(2),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"port alarm state"
		::= { speedDuallineFCPortOverviewEntry 11 }

	speedDuallineFCPortAlarmDeactivation OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			alarmReportingEnabled(1),
			alarmReportingDisabledbySchedule(2),
			alarmReportingDisabledPermanent(3),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule"
		::= { speedDuallineFCPortOverviewEntry 12 }

	speedDuallineFCPortAlarmSchedule OBJECT-TYPE
		SYNTAX INTEGER (0..1200)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Port alarm deactivation schedule. Value in hours. After this time has elapsed, the alarms are active again. Valid range: 1..1200. 0 means less then 1 hour"
		::= { speedDuallineFCPortOverviewEntry 13 }

-- *********************************

	speedDuallineFCXCVOverviewTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCXCVOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC transceiver overview table"
		::= { speedDuallineFC 5 }

	speedDuallineFCXCVOverviewEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCXCVOverviewEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver overview entries"
		INDEX { speedDuallineFCPortIndex }
		::= { speedDuallineFCXCVOverviewTable 1 }

	SpeedDuallineFCXCVOverviewEntry ::=
		SEQUENCE
		{
			speedDuallineFCPortIndex INTEGER,
			speedDuallineFCPortSlot INTEGER,
			speedDuallineFCPortPort INTEGER,
			speedDuallineFCPortXCVVendorName DisplayString,
			speedDuallineFCPortXCVVendorPartNumber DisplayString,
			speedDuallineFCPortXCVVendorSerialNumber DisplayString,
			speedDuallineFCPortXCVType INTEGER,
			speedDuallineFCPortXCVConnector INTEGER,
			speedDuallineFCPortXCVWavelength INTEGER,
			speedDuallineFCPortXCVDMIState INTEGER
		}

	speedDuallineFCPortXCVVendorName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver vendor name"
		::= { speedDuallineFCXCVOverviewEntry 4 }

	speedDuallineFCPortXCVVendorPartNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver part number"
		::= { speedDuallineFCXCVOverviewEntry 5 }

	speedDuallineFCPortXCVVendorSerialNumber OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..32))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver serial number"
		::= { speedDuallineFCXCVOverviewEntry 6 }

	speedDuallineFCPortXCVType OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0),
			tGBIC(1),
			tModuleSolderedToMotherboard(2),
			tSFPTransceiver(3),
			t300PinXBI(4),
			tXENPAK(5),
			tXFP(6),
			tXFF(7),
			tXFP-E(8),
			tXPAK(9),
			tX2(10),
			tDWDMSFPTransceiver(11),
			tCopperSFPTransceiver(254),
			vendorSpecific(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver type"
		::= { speedDuallineFCXCVOverviewEntry 7 }

	speedDuallineFCPortXCVConnector OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0),
			cSC(1),
			cFibreChannelStyle1CopperConnector(2),
			cFibreChannelStyle2CopperConnector(3),
			cBncTnc(4),
			cFibreChannerCoaxialHeader(5),
			cFibreJack(6),
			cLC(7),
			cMTRJ(8),
			cMU(9),
			cSG(10),
			cOpticalPigtail(11),
			cHSSDCII(32),
			cCopperPigtail(33),
			cRJ45(34),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver connector"
		::= { speedDuallineFCXCVOverviewEntry 8 }

	speedDuallineFCPortXCVWavelength OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver supported wavelength (value * 100)"
		::= { speedDuallineFCXCVOverviewEntry 9 }

	speedDuallineFCPortXCVDMIState OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			sff8472V93(1),
			sff8472V95(2),
			sff8472V102(3),
			sff8472V104(4),
			sff8472V11(5),
			dmiAvailable(253),
			notImplemented(254),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver DMI compliance"
		::= { speedDuallineFCXCVOverviewEntry 10 }

-- *********************************

	speedDuallineFCXCVFeatureTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCXCVFeatureEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC transceiver feature table"
		::= { speedDuallineFC 6 }

	speedDuallineFCXCVFeatureEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCXCVFeatureEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver feature entries"
		INDEX { speedDuallineFCPortIndex }
		::= { speedDuallineFCXCVFeatureTable 1 }

	SpeedDuallineFCXCVFeatureEntry ::=
		SEQUENCE
		{
			speedDuallineFCPortIndex INTEGER,
			speedDuallineFCPortSlot INTEGER,
			speedDuallineFCPortPort INTEGER,
			speedDuallineFCPortXCVBitrateMax INTEGER,
			speedDuallineFCPortXCVBitrateMin INTEGER,
			speedDuallineFCPortXCVLengthSMkm INTEGER,
			speedDuallineFCPortXCVLength50 INTEGER,
			speedDuallineFCPortXCVLength62 INTEGER,
			speedDuallineFCPortXCVLengthCopper INTEGER
		}

	speedDuallineFCPortXCVBitrateMax OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The upper bit rate limit at which the SFP transceiver will still meet its specifications is specified in units of 1 Megabit per second. A value of 0 indicates that this field is not specified."
		::= { speedDuallineFCXCVFeatureEntry 4 }

	speedDuallineFCPortXCVBitrateMin OBJECT-TYPE
		SYNTAX INTEGER
		{
			unspecified(0)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The lower bit rate limit at which the SFP transceiver will still meet its specifications is specified in units of 1 Megabit per second. A value of 0 indicates that this field is not specified."
		::= { speedDuallineFCXCVFeatureEntry 5 }

	speedDuallineFCPortXCVLengthSMkm OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using single mode fiber. The value is in units of kilometers. A value of 255 means that the transceiver supports a link greater than 254 km. A value of 0 means that the transceiver does not support single mode fiber or that the length information must be determined from the transceiver technology."
		::= { speedDuallineFCXCVFeatureEntry 6 }

	speedDuallineFCPortXCVLength50 OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using 50 micron OM2 multi mode fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link greater than 2.54 km. A value of 0 means that the transceiver does not support 50 micron multi mode fiber or that the length information must be determined from the transceiver technology."
		::= { speedDuallineFCXCVFeatureEntry 7 }

	speedDuallineFCPortXCVLength62 OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported	by the SFP transceiver while operating in compliance with the applicable standards using 62.5 micron multi mode fiber. The value is in units of 10 meters. A value of 255 means that the transceiver supports a link greater than 2.54 km. A value of 0 means that the transceiver does not support 62.5 micron multi mode fiber or that the length information must be determined from the transceiver technology."
		::= { speedDuallineFCXCVFeatureEntry 8 }

	speedDuallineFCPortXCVLengthCopper OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This value specifies the link length that is supported by the SFP transceiver while operating in compliance with the applicable standards using copper cable. The value is in units of 1 meter. A value of 255 means that the transceiver supports a link greater than 254 m. A value of 0 means that the transceiver does not support copper cable or that the length information must be determined from the transceiver technology. Further information about the cable design, equalization, and connectors is usually required to guarantee meeting of particular length information."
		::= { speedDuallineFCXCVFeatureEntry 9 }

-- *********************************

	speedDuallineFCXCVMeassurementTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCXCVMeassurementEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC transceiver DMI meassurement table"
		::= { speedDuallineFC 7 }

	speedDuallineFCXCVMeassurementEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCXCVMeassurementEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver DMI meassurement entries"
		INDEX { speedDuallineFCPortIndex }
		::= { speedDuallineFCXCVMeassurementTable 1 }

	SpeedDuallineFCXCVMeassurementEntry ::=
		SEQUENCE
		{
			speedDuallineFCPortIndex INTEGER,
			speedDuallineFCPortSlot INTEGER,
			speedDuallineFCPortPort INTEGER,
			speedDuallineFCPortXCVDMIRxLevel INTEGER,
			speedDuallineFCPortXCVDMITxLevel INTEGER,
			speedDuallineFCPortXCVDMITxBias INTEGER,
			speedDuallineFCPortXCVDMITemp INTEGER
		}


	speedDuallineFCPortXCVDMIRxLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"optical receive level (dBm value * 100)"
		::= { speedDuallineFCXCVMeassurementEntry 4 }

	speedDuallineFCPortXCVDMITxLevel OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"optical transmit level (dBm value * 100)"
		::= { speedDuallineFCXCVMeassurementEntry 5 }

	speedDuallineFCPortXCVDMITxBias OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transmitter TX bias current (mA)"
		::= { speedDuallineFCXCVMeassurementEntry 6 }

	speedDuallineFCPortXCVDMITemp OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transmitter temperature (degree Celsius)"
		::= { speedDuallineFCXCVMeassurementEntry 7 }

-- *********************************

	speedDuallineFCXCVAlarmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCXCVAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC transceiver alarm table"
		::= { speedDuallineFC 8 }

	speedDuallineFCXCVAlarmEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCXCVAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module transceiver alarm entries"
		INDEX { speedDuallineFCPortIndex }
		::= { speedDuallineFCXCVAlarmTable 1 }

	SpeedDuallineFCXCVAlarmEntry ::=
		SEQUENCE
		{
			speedDuallineFCPortIndex INTEGER,
			speedDuallineFCPortSlot INTEGER,
			speedDuallineFCPortPort INTEGER,
			speedDuallineFCPortXCVDMIRxPowerAlarm INTEGER,
			speedDuallineFCPortXCVDMITxLowAlarm INTEGER,
			speedDuallineFCPortXCVDMIBiasAlarmEvent INTEGER,
			speedDuallineFCPortXCVDWDMLaserTempAlarmEvent INTEGER,
			speedDuallineFCPortXCVDWDMTECAlarmEvent INTEGER,
			speedDuallineFCPortXCVTempHighAlarm INTEGER,
			speedDuallineFCPortXCVCDRALARM INTEGER,
			speedDuallineFCPortXCVTuningAlarm INTEGER
		}

	speedDuallineFCPortXCVDMIRxPowerAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			rxLowWarning(2),
			rxLowAlarm(3),
			rxHighAlarm(4),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver RX power event"
		::= { speedDuallineFCXCVAlarmEntry 4 }

	speedDuallineFCPortXCVDMITxLowAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver TX power event"
		::= { speedDuallineFCXCVAlarmEntry 5 }

	speedDuallineFCPortXCVDMIBiasAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver bias current event"
		::= { speedDuallineFCXCVAlarmEntry 6 }

	speedDuallineFCPortXCVDWDMLaserTempAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable (0),
			noAlarm (1),
			lowAlarm (2),
			highAlarm(3),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver DWDM laser temperature event"
		::= { speedDuallineFCXCVAlarmEntry 7 }

	speedDuallineFCPortXCVDWDMTECAlarmEvent OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable(0),
			noAlarm(1),
			activeAlarms(2),
			unknown (255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver DWDM TEC event"
		::= { speedDuallineFCXCVAlarmEntry 8 }

	speedDuallineFCPortXCVTempHighAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			highWarning(2),
			highAlarm(3),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Transceiver temperature event"
		::= { speedDuallineFCXCVAlarmEntry 9 }

	speedDuallineFCPortXCVCDRALARM OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			activeAlarm(2),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"clock data recovery event"
		::= { speedDuallineFCXCVAlarmEntry 10 }

	speedDuallineFCPortXCVTuningAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			activeAlarm(2),
			notImplemented(254),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Tunable Transceiver tuning alarm"
		::= { speedDuallineFCXCVAlarmEntry 11 }

-- *********************************

	speedDuallineFCMBoardAlarmTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCMBoardAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC module board alarm table"
		::= { speedDuallineFC 9 }

	speedDuallineFCMBoardAlarmEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCMBoardAlarmEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Module board alarm entries"
		INDEX { speedDuallineFCMSlot }
		::= { speedDuallineFCMBoardAlarmTable 1 }

	SpeedDuallineFCMBoardAlarmEntry ::=
		SEQUENCE
		{
			speedDuallineFCMSlot INTEGER,
			speedDuallineFCMBoardTempAlarm INTEGER
		}

	speedDuallineFCMBoardTempAlarm OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			noAlarm(1),
			highWarning(2),
			highAlarm(3),
			unknown(255)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"board temperature event"
		::= { speedDuallineFCMBoardAlarmEntry 3 }

-- *********************************

	speedDuallineFCXCVTunableTable OBJECT-TYPE
		SYNTAX SEQUENCE OF SpeedDuallineFCXCVTunableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"Speed-Dualline FC tunable transceiver table"
		::= { speedDuallineFC 10 }

	speedDuallineFCXCVTunableEntry OBJECT-TYPE
		SYNTAX SpeedDuallineFCXCVTunableEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"transceiver tunable entries"
		INDEX { speedDuallineFCPortIndex }
		::= { speedDuallineFCXCVTunableTable 1 }

	SpeedDuallineFCXCVTunableEntry ::=
		SEQUENCE
		{
			speedDuallineFCPortIndex INTEGER,
			speedDuallineFCPortSlot INTEGER,
			speedDuallineFCPortPort INTEGER,
			speedDuallineFCPortXCVChannelSpacing INTEGER,
			speedDuallineFCPortXCVNumberOfChannels INTEGER,
			speedDuallineFCPortXCVCenterWavlength INTEGER,
			speedDuallineFCPortXCVTunableFeature INTEGER,
			speedDuallineFCPortXCVTunableMinMaxChannel DisplayString,
			speedDuallineFCPortXCVTunableWavelengthConfig INTEGER,
			speedDuallineFCPortXCVTunableChannelConfig DisplayString,
			speedDuallineFCPortXCVTunableConfigSelection INTEGER
		}

	speedDuallineFCPortXCVChannelSpacing OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV channel spacing"
		::= { speedDuallineFCXCVTunableEntry 4 }

	speedDuallineFCPortXCVNumberOfChannels OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV supported number channels"
		::= { speedDuallineFCXCVTunableEntry 5 }

	speedDuallineFCPortXCVCenterWavlength OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"XCV center wavelength"
		::= { speedDuallineFCXCVTunableEntry 6 }

	speedDuallineFCPortXCVTunableFeature OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailable (0),
			notTunable (1),
			byWavelength (2),
			byChannel (4),
			byChannelAndWavelength (6)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"is transceiver tunable?"
		::= { speedDuallineFCXCVTunableEntry 7 }

	speedDuallineFCPortXCVTunableMinMaxChannel OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..9))
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Set parameter for transceiver channel config. "
		::= { speedDuallineFCXCVTunableEntry 8 }

	speedDuallineFCPortXCVTunableWavelengthConfig OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"XCV wavelength control. Min value is 1528000 and max value is 1564000. Wavelength value in units of picometer!"
		::= { speedDuallineFCXCVTunableEntry 9 }

	speedDuallineFCPortXCVTunableChannelConfig OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..4))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"Set parameter for transceiver channel config. Allowed channels are from C1..H61. 'C' represents the 100GHz channel and 'H' is 50 GHz above the corresponding 100GHz channel."
		::= { speedDuallineFCXCVTunableEntry 10 }

	speedDuallineFCPortXCVTunableConfigSelection OBJECT-TYPE
		SYNTAX INTEGER
		{
			notAvailiable(0),
			xcvInternal(1),
			configFile(2),
			unknown(255)
		}
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"selects which config should be used (internal XCV or transponder card config)"
		::= { speedDuallineFCXCVTunableEntry 11 }


END