-- =====================================================================
-- == OG-OMSTATUS-MIB:                                                ==
-- == Opengear Operation Manager Status Management Information Base   ==
-- ==                                                                 ==
-- == (c) Copyright 2020 Opengear Inc.                                ==
-- =====================================================================

OG-OMTELEM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    ogMgmt
        FROM OG-SMI-MIB
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    Counter32, Counter64, Integer32, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI
    DateAndTime, DisplayString
        FROM SNMPv2-TC;

ogOmTelem MODULE-IDENTITY
    LAST-UPDATED "202311130934Z"
    ORGANIZATION
        "Opengear Inc."
    CONTACT-INFO
        "Opengear Inc.
        630 West 9560 South, Suite A,
        Sandy, UT 84070
        support@opengear.com"
    DESCRIPTION
        "Opengear Operation Manager Telemetry MIB"
    REVISION "202311130934Z"
    DESCRIPTION
        "Update Opengear Telemetry MIB for version 23.12.0.
        - Add lteNr5g and nr5g enum values to accessTechnology leaf."
    REVISION "202103121454Z"
    DESCRIPTION
        "added lastActiveTime to cell-uim submodule"
    REVISION "202008041454Z"
    DESCRIPTION
        "Initial revision"
    ::= { ogMgmt 19 }


ogOmSystem OBJECT IDENTIFIER ::= { ogOmTelem 1 }

ogOmSystemHostName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current host name (if applicable)."
    ::= { ogOmSystem 1 }

ogOmSystemSerialNumber OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current serial number (if applicable)."
    ::= { ogOmSystem 2 }

ogOmSystemFirmwareVersion OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current device firmware."
    ::= { ogOmSystem 3 }

ogOmSystemVendor OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The device vendor."
    ::= { ogOmSystem 4 }

ogOmSystemModel OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..16))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The device model."
    ::= { ogOmSystem 5 }

ogOmSerialPort OBJECT IDENTIFIER ::= { ogOmTelem 2 }

ogOmSerialPortCount OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The number of serial ports"
    ::= { ogOmSerialPort 1 }

ogOmSerialPortTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF SerialPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Serial Port table structure."
    ::= { ogOmSerialPort 2 }

ogOmSerialPortEntry OBJECT-TYPE
    SYNTAX SerialPortEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A serial port status table entry."
    INDEX { ogOmSerialPortIndex }
    ::= { ogOmSerialPortTable 1 }

SerialPortEntry ::= SEQUENCE  {
    ogOmSerialPortIndex    Integer32,
    ogOmSerialPortLabel    DisplayString,
    ogOmSerialPortSpeed    Integer32,
    ogOmSerialPortDataBits    Integer32,
    ogOmSerialPortParity    INTEGER,
    ogOmSerialPortStopBits    INTEGER,
    ogOmSerialPortFlowControl    INTEGER,
    ogOmSerialPortMode    INTEGER,
    ogOmSerialPortPinout    INTEGER,
    ogOmSerialPortLogLevel    INTEGER,
    ogOmSerialPortRxBytes    Counter64,
    ogOmSerialPortTxBytes    Counter64,
    ogOmSerialPortFramingErrors    Counter64,
    ogOmSerialPortParityErrors    Counter64,
    ogOmSerialPortOverrunErrors    Counter64,
    ogOmSerialPortBreaks    Counter64,
    ogOmSerialPortDCD    INTEGER,
    ogOmSerialPortDTR    INTEGER,
    ogOmSerialPortDSR    INTEGER,
    ogOmSerialPortCTS    INTEGER,
    ogOmSerialPortRTS    INTEGER
}

ogOmSerialPortIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index within the serial port table of this status"
    ::= { ogOmSerialPortEntry 1 }

ogOmSerialPortLabel OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port descriptive name"
    ::= { ogOmSerialPortEntry 2 }

ogOmSerialPortSpeed OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port speed in bits per second"
    ::= { ogOmSerialPortEntry 3 }

ogOmSerialPortDataBits OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port character size"
    ::= { ogOmSerialPortEntry 4 }

ogOmSerialPortParity OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        odd(2),
        even(3),
        mark(4),
        space(5)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port parity"
    ::= { ogOmSerialPortEntry 5 }

ogOmSerialPortStopBits OBJECT-TYPE
    SYNTAX INTEGER {
        one(1),
        two(2),
        oneAndAHalf(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port number of stop bits"
    ::= { ogOmSerialPortEntry 6 }

ogOmSerialPortFlowControl OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        hardware(2),
        software(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port flow control type"
    ::= { ogOmSerialPortEntry 7 }

ogOmSerialPortMode OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(1),
        localConsole(2),
        consoleServer(3),
        bridge(4),
        terminalServer(5),
        reserved(6),
        pduDevice(7),
        unknown(8)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port operational mode type"
    ::= { ogOmSerialPortEntry 8 }

ogOmSerialPortPinout OBJECT-TYPE
    SYNTAX INTEGER {
        x1(1),
        x2(2),
        usb(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port pinout type"
    ::= { ogOmSerialPortEntry 9 }

ogOmSerialPortLogLevel OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(1),
        connect(2),
        inputAndOutput(3),
        inputOnly(4)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port logging level"
    ::= { ogOmSerialPortEntry 10 }

ogOmSerialPortRxBytes OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port bytes received"
    ::= { ogOmSerialPortEntry 11 }

ogOmSerialPortTxBytes OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port bytes transmitted"
    ::= { ogOmSerialPortEntry 12 }

ogOmSerialPortFramingErrors OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port framing error total."
    ::= { ogOmSerialPortEntry 13 }

ogOmSerialPortParityErrors OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port parity error total."
    ::= { ogOmSerialPortEntry 14 }

ogOmSerialPortOverrunErrors OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port Overrun Error total."
    ::= { ogOmSerialPortEntry 15 }

ogOmSerialPortBreaks OBJECT-TYPE
    SYNTAX Counter64
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port break total"
    ::= { ogOmSerialPortEntry 16 }

ogOmSerialPortDCD OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(0),
        on(1),
        off(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The status of the DCD signal."
    ::= { ogOmSerialPortEntry 17 }

ogOmSerialPortDTR OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(0),
        on(1),
        off(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The status of the DTR signal."
    ::= { ogOmSerialPortEntry 18 }

ogOmSerialPortDSR OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(0),
        on(1),
        off(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The status of the DSR signal."
    ::= { ogOmSerialPortEntry 19 }

ogOmSerialPortCTS OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(0),
        on(1),
        off(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The status of the CTS signal."
    ::= { ogOmSerialPortEntry 20 }

ogOmSerialPortRTS OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(0),
        on(1),
        off(2)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The status of the RTS signal."
    ::= { ogOmSerialPortEntry 21 }

ogOmSerialUser OBJECT IDENTIFIER ::= { ogOmTelem 3 }

ogOmSerialUserTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF SerialUserEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Serial Console User table entry structure."
    ::= { ogOmSerialUser 1 }

ogOmSerialUserEntry OBJECT-TYPE
    SYNTAX SerialUserEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A user logged in on the serial port"
    INDEX { ogOmSerialUserIndex }
    ::= { ogOmSerialUserTable 1 }

SerialUserEntry ::= SEQUENCE  {
    ogOmSerialUserIndex    Integer32,
    ogOmSerialUserStartTime    DateAndTime,
    ogOmSerialUserPortNumber    Integer32,
    ogOmSerialUserPortLabel    DisplayString,
    ogOmSerialUserName    DisplayString
}

ogOmSerialUserIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index within the serial port active users table"
    ::= { ogOmSerialUserEntry 1 }

ogOmSerialUserStartTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The time and date the user session started."
    ::= { ogOmSerialUserEntry 2 }

ogOmSerialUserPortNumber OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Serial port number"
    ::= { ogOmSerialUserEntry 3 }

ogOmSerialUserPortLabel OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The readable label for the serial port."
    ::= { ogOmSerialUserEntry 4 }

ogOmSerialUserName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The name of the user logged in on the port."
    ::= { ogOmSerialUserEntry 5 }

ogOmWebUser OBJECT IDENTIFIER ::= { ogOmTelem 4 }

ogOmWebUserTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF WebUserEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Web UI User table structure."
    ::= { ogOmWebUser 1 }

ogOmWebUserEntry OBJECT-TYPE
    SYNTAX WebUserEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A user logged in to the Web Interface"
    INDEX { ogOmWebUserIndex }
    ::= { ogOmWebUserTable 1 }

WebUserEntry ::= SEQUENCE  {
    ogOmWebUserIndex    Integer32,
    ogOmWebUserStartTime    DateAndTime,
    ogOmWebUserName    DisplayString,
    ogOmWebUserSourceAddress    DisplayString,
    ogOmWebUserSourcePort    Integer32
}

ogOmWebUserIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index within the Web Interface users table"
    ::= { ogOmWebUserEntry 1 }

ogOmWebUserStartTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The web users session start date and time."
    ::= { ogOmWebUserEntry 2 }

ogOmWebUserName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The web users active username."
    ::= { ogOmWebUserEntry 3 }

ogOmWebUserSourceAddress OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The web users source address."
    ::= { ogOmWebUserEntry 4 }

ogOmWebUserSourcePort OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The web users source tcp port."
    ::= { ogOmWebUserEntry 5 }

ogOmCellular OBJECT IDENTIFIER ::= { ogOmTelem 5 }

ogOmCellularTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF CellularEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Cellular modem table structure."
    ::= { ogOmCellular 1 }

ogOmCellularEntry OBJECT-TYPE
    SYNTAX CellularEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A cellular modem status entry."
    INDEX { ogOmCellularIndex }
    ::= { ogOmCellularTable 1 }

CellularEntry ::= SEQUENCE  {
    ogOmCellularIndex    Integer32,
    ogOmCellularVendor    DisplayString,
    ogOmCellularModel    DisplayString,
    ogOmCellularEquipmentId    DisplayString,
    ogOmCellularFirmware    DisplayString,
    ogOmCellularState    INTEGER,
    ogOmCellularAccessTechnology    INTEGER,
    ogOmCellularActiveUim    Counter32,
    ogOmCellularUimFailoverState    INTEGER
}

ogOmCellularIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of the cellular modem status entry."
    ::= { ogOmCellularEntry 1 }

ogOmCellularVendor OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Manufacturer ID of Cellular Modem."
    ::= { ogOmCellularEntry 2 }

ogOmCellularModel OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Cellular Modem model name."
    ::= { ogOmCellularEntry 3 }

ogOmCellularEquipmentId OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Cellular Modem Equipment Identifier (IMEI)."
    ::= { ogOmCellularEntry 4 }

ogOmCellularFirmware OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current Cellular Modem firmware revision."
    ::= { ogOmCellularEntry 5 }

ogOmCellularState OBJECT-TYPE
    SYNTAX INTEGER {
        failed(1),
        unknown(2),
        initializing(3),
        locked(4),
        disabled(5),
        disabling(6),
        enabling(7),
        enabled(8),
        searching(9),
        registered(10),
        disconnecting(11),
        connecting(12),
        connected(13)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The overall current state of the modem."
    ::= { ogOmCellularEntry 6 }

ogOmCellularAccessTechnology OBJECT-TYPE
    SYNTAX INTEGER {
        unavailable(1),
        cdma(2),
        evdo(3),
        gsm(4),
        umts(5),
        lte(6),
        gsmUmts(7),
        gsmUmtsLte(8),
        cdmaEvdo(9),
        cdmaEvdoLte(10),
        lteNr5g(11),
        nr5g(12)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current Radio Access Technology being used"
    ::= { ogOmCellularEntry 7 }

ogOmCellularActiveUim OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The physical UIM card slot number that is currently active."
    ::= { ogOmCellularEntry 8 }

ogOmCellularUimFailoverState OBJECT-TYPE
    SYNTAX INTEGER {
        unavailable(1),
        disabled(2),
        enabled(3),
        failingOver(4),
        failedOver(5),
        failingBack(6)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current UIM failover state"
    ::= { ogOmCellularEntry 9 }

ogOmCellUim OBJECT IDENTIFIER ::= { ogOmTelem 6 }

ogOmCellUimTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF CellUimEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Cellular modem UIM table structure."
    ::= { ogOmCellUim 1 }

ogOmCellUimEntry OBJECT-TYPE
    SYNTAX CellUimEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A cellular modem UIM status entry."
    INDEX { ogOmCellUimIndex }
    ::= { ogOmCellUimTable 1 }

CellUimEntry ::= SEQUENCE  {
    ogOmCellUimIndex    Integer32,
    ogOmCellUimPhysicalSlot    Counter32,
    ogOmCellUimSlotState    INTEGER,
    ogOmCellUimCardState    INTEGER,
    ogOmCellUimIccid    DisplayString,
    ogOmCellUimImsi    DisplayString,
    ogOmCellUimOperatorName    DisplayString,
    ogOmCellUimApn    DisplayString,
    ogOmCellUimSignalQuality    Integer32,
    ogOmCellUimRssi    Integer32,
    ogOmCellUimConnectivityHealth    INTEGER,
    ogOmCellUimSignalHealth    INTEGER,
    ogOmCellUimLastUpdateTime    DateAndTime,
    ogOmCellUimLastActiveTime    DateAndTime,
    ogOmCellUimRoamingOperatorName    DisplayString
}

ogOmCellUimIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of the cellular modem UIM card."
    ::= { ogOmCellUimEntry 1 }

ogOmCellUimPhysicalSlot OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The physical UIM card slot number."
    ::= { ogOmCellUimEntry 2 }

ogOmCellUimSlotState OBJECT-TYPE
    SYNTAX INTEGER {
        unavailable(1),
        inactive(2),
        active(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current state of the Cellular Modem signal quality."
    ::= { ogOmCellUimEntry 3 }

ogOmCellUimCardState OBJECT-TYPE
    SYNTAX INTEGER {
        unavailable(1),
        absent(2),
        present(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current UIM Card presence state."
    ::= { ogOmCellUimEntry 4 }

ogOmCellUimIccid OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The ICCID of the UIM card currently in use by this modem."
    ::= { ogOmCellUimEntry 5 }

ogOmCellUimImsi OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IMSI of the UIM card currently in use by this modem."
    ::= { ogOmCellUimEntry 6 }

ogOmCellUimOperatorName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The name of the home network operator for this UIM card."
    ::= { ogOmCellUimEntry 7 }

ogOmCellUimApn OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The APN configured for this cellular modem UIM card."
    ::= { ogOmCellUimEntry 8 }

ogOmCellUimSignalQuality OBJECT-TYPE
    SYNTAX Integer32 (0..100)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Signal quality as a percent of the dominant access technology the device is using to communicate with the network."
    ::= { ogOmCellUimEntry 9 }

ogOmCellUimRssi OBJECT-TYPE
    SYNTAX Integer32 (-99..99)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Received Signal Strength Indicator (RSSI) for the current Radio Access Technology if applicable."
    ::= { ogOmCellUimEntry 10 }

ogOmCellUimConnectivityHealth OBJECT-TYPE
    SYNTAX INTEGER {
        unavailable(1),
        bad(2),
        good(3)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current state of the Cellular Modem connectivity testing."
    ::= { ogOmCellUimEntry 11 }

ogOmCellUimSignalHealth OBJECT-TYPE
    SYNTAX INTEGER {
        unavailable(1),
        bad(2),
        moderate(3),
        good(4)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current state of the Cellular Modem signal quality."
    ::= { ogOmCellUimEntry 12 }

ogOmCellUimLastUpdateTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The date and time of the last UIM card status check."
    ::= { ogOmCellUimEntry 13 }

ogOmCellUimLastActiveTime OBJECT-TYPE
    SYNTAX DateAndTime
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The date and time of the last UIM card activation."
    ::= { ogOmCellUimEntry 14 }

ogOmCellUimRoamingOperatorName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The name of the roaming network operator for this UIM card."
    ::= { ogOmCellUimEntry 15 }

ogOmEnrollment OBJECT IDENTIFIER ::= { ogOmTelem 7 }

ogOmEnrollmentTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF EnrollmentEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Lighthouse Enrollment table structure."
    ::= { ogOmEnrollment 1 }

ogOmEnrollmentEntry OBJECT-TYPE
    SYNTAX EnrollmentEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A Lighthouse Enrollment status entry."
    INDEX { ogOmEnrollmentIndex }
    ::= { ogOmEnrollmentTable 1 }

EnrollmentEntry ::= SEQUENCE  {
    ogOmEnrollmentIndex    Integer32,
    ogOmEnrollmentAddress    DisplayString,
    ogOmEnrollmentPort    Integer32,
    ogOmEnrollmentBundle    DisplayString,
    ogOmEnrollmentStatus    INTEGER
}

ogOmEnrollmentIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of the Lighthouse Enrollment status entry."
    ::= { ogOmEnrollmentEntry 1 }

ogOmEnrollmentAddress OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Lighthouse Enrollment address."
    ::= { ogOmEnrollmentEntry 2 }

ogOmEnrollmentPort OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Lighthouse Enrollment TCP port."
    ::= { ogOmEnrollmentEntry 3 }

ogOmEnrollmentBundle OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Lighthouse Enrollment bundle."
    ::= { ogOmEnrollmentEntry 4 }

ogOmEnrollmentStatus OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        enrolling(2),
        connected(3),
        disconnected(4),
        registered(5),
        failed(6)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The current Lighthouse Enrollment status."
    ::= { ogOmEnrollmentEntry 5 }

ogOmPowerSupply OBJECT IDENTIFIER ::= { ogOmTelem 8 }

ogOmPowerSupplyTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF PowerSupplyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Power Supply table structure."
    ::= { ogOmPowerSupply 1 }

ogOmPowerSupplyEntry OBJECT-TYPE
    SYNTAX PowerSupplyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A Power Supply status entry."
    INDEX { ogOmPowerSupplyIndex }
    ::= { ogOmPowerSupplyTable 1 }

PowerSupplyEntry ::= SEQUENCE  {
    ogOmPowerSupplyIndex    Integer32,
    ogOmPowerSupplyName    DisplayString,
    ogOmPowerSupplyDevice    DisplayString,
    ogOmPowerSupplyInputVoltage    Integer32,
    ogOmPowerSupplyOutputCurrent    Integer32,
    ogOmPowerSupplyOutputPower    Integer32
}

ogOmPowerSupplyIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of the power supply status entry."
    ::= { ogOmPowerSupplyEntry 1 }

ogOmPowerSupplyName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Power Supply name."
    ::= { ogOmPowerSupplyEntry 2 }

ogOmPowerSupplyDevice OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Power Supply device."
    ::= { ogOmPowerSupplyEntry 3 }

ogOmPowerSupplyInputVoltage OBJECT-TYPE
    SYNTAX Integer32
    UNITS "0.001 volts"

    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Power Supply input voltage."
    ::= { ogOmPowerSupplyEntry 4 }

ogOmPowerSupplyOutputCurrent OBJECT-TYPE
    SYNTAX Integer32
    UNITS "0.001 Amps"

    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Power Supply output current."
    ::= { ogOmPowerSupplyEntry 5 }

ogOmPowerSupplyOutputPower OBJECT-TYPE
    SYNTAX Integer32
    UNITS "Watts"

    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Power Supply output power."
    ::= { ogOmPowerSupplyEntry 6 }

ogOmTempSensor OBJECT IDENTIFIER ::= { ogOmTelem 9 }

ogOmTempSensorTable OBJECT-TYPE
    SYNTAX    SEQUENCE OF TempSensorEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The Operations Manager Temperature Sensor table structure."
    ::= { ogOmTempSensor 1 }

ogOmTempSensorEntry OBJECT-TYPE
    SYNTAX TempSensorEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A Temperature Sensor status entry."
    INDEX { ogOmTempSensorIndex }
    ::= { ogOmTempSensorTable 1 }

TempSensorEntry ::= SEQUENCE  {
    ogOmTempSensorIndex    Integer32,
    ogOmTempSensorName    DisplayString,
    ogOmTempSensorDevice    DisplayString,
    ogOmTempSensorValue    Integer32
}

ogOmTempSensorIndex OBJECT-TYPE
    SYNTAX Integer32 (0..65535)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Index of the Temperature Sensor status entry."
    ::= { ogOmTempSensorEntry 1 }

ogOmTempSensorName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Temperature Sensor name."
    ::= { ogOmTempSensorEntry 2 }

ogOmTempSensorDevice OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..255))
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Temperature Sensor device."
    ::= { ogOmTempSensorEntry 3 }

ogOmTempSensorValue OBJECT-TYPE
    SYNTAX Integer32
    UNITS "millidegrees Celsius"

    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The Temperature Sensor value."
    ::= { ogOmTempSensorEntry 4 }

-- Conformance Information
ogOmConformance OBJECT IDENTIFIER ::= { ogOmTelem 65535 }
ogOmCompliances OBJECT IDENTIFIER ::= { ogOmConformance 1 }
ogOmGroups OBJECT IDENTIFIER ::= { ogOmConformance 2 }

-- Compliance Statements
ogOmCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for the ogOm MIB."
    MODULE  -- this module
    MANDATORY-GROUPS {
        ogOmBasicGroup
    }

::= { ogOmCompliances 1 }

-- Units of Conformance
ogOmBasicGroup OBJECT-GROUP
    OBJECTS {
        ogOmSystemHostName,
        ogOmSystemSerialNumber,
        ogOmSystemFirmwareVersion,
        ogOmSystemVendor,
        ogOmSystemModel,
        ogOmSerialPortCount,
        ogOmSerialPortLabel,
        ogOmSerialPortSpeed,
        ogOmSerialPortDataBits,
        ogOmSerialPortParity,
        ogOmSerialPortStopBits,
        ogOmSerialPortFlowControl,
        ogOmSerialPortMode,
        ogOmSerialPortPinout,
        ogOmSerialPortLogLevel,
        ogOmSerialPortRxBytes,
        ogOmSerialPortTxBytes,
        ogOmSerialPortFramingErrors,
        ogOmSerialPortParityErrors,
        ogOmSerialPortOverrunErrors,
        ogOmSerialPortBreaks,
        ogOmSerialPortDCD,
        ogOmSerialPortDTR,
        ogOmSerialPortDSR,
        ogOmSerialPortCTS,
        ogOmSerialPortRTS,
        ogOmSerialUserStartTime,
        ogOmSerialUserPortNumber,
        ogOmSerialUserPortLabel,
        ogOmSerialUserName,
        ogOmWebUserStartTime,
        ogOmWebUserName,
        ogOmWebUserSourceAddress,
        ogOmWebUserSourcePort,
        ogOmCellularVendor,
        ogOmCellularModel,
        ogOmCellularEquipmentId,
        ogOmCellularFirmware,
        ogOmCellularState,
        ogOmCellularAccessTechnology,
        ogOmCellularActiveUim,
        ogOmCellularUimFailoverState,
        ogOmCellUimPhysicalSlot,
        ogOmCellUimSlotState,
        ogOmCellUimCardState,
        ogOmCellUimIccid,
        ogOmCellUimImsi,
        ogOmCellUimOperatorName,
        ogOmCellUimApn,
        ogOmCellUimSignalQuality,
        ogOmCellUimRssi,
        ogOmCellUimConnectivityHealth,
        ogOmCellUimSignalHealth,
        ogOmCellUimLastUpdateTime,
        ogOmCellUimLastActiveTime,
        ogOmCellUimRoamingOperatorName,
        ogOmEnrollmentAddress,
        ogOmEnrollmentPort,
        ogOmEnrollmentBundle,
        ogOmEnrollmentStatus,
        ogOmPowerSupplyName,
        ogOmPowerSupplyDevice,
        ogOmPowerSupplyInputVoltage,
        ogOmPowerSupplyOutputCurrent,
        ogOmPowerSupplyOutputPower,
        ogOmTempSensorName,
        ogOmTempSensorDevice,
        ogOmTempSensorValue
    }
    STATUS current
    DESCRIPTION
        "A collection of ogOm related objects."
    ::= { ogOmGroups 1 }

END