RC-MLT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32, Counter64, IpAddress, TimeTicks FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus, MacAddress FROM SNMPv2-TC InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB rcMlt, rcStat, rcLinkFlapDetect, rcL2Redundancy, PortSet, IdList, EnableValue FROM RAPID-CITY; rcMltMib MODULE-IDENTITY LAST-UPDATED "201509040000Z" ORGANIZATION "Bay Networks, Rapid-City Group" CONTACT-INFO "Yu-Ten Lee Postal: Nortel Networks 4655 Great America Parkway Santa Clara, CA 95052-8185 Tel: 408-495-2560 Fax: 408-495-6680 E-mail: ylee@nortelnetworks.com" DESCRIPTION "Enterprise MIB for the Accelar product family." REVISION "201509040000Z" -- 04 Sept. 2015 DESCRIPTION "Version 39: changed rcMltMefUniEnable to rcMltFlexUniEnable. Request by Shang Chang (malok)" REVISION "201507210000Z" -- 21 Jul 2015 DESCRIPTION "Version 38: Changed the syntax of rcMltMefUniEnable from EnableValue to TruthValue (Prem)" REVISION "201502250000Z" -- 25 Feb 2015 DESCRIPTION "Version 37: Added rcMltMefUniEnable. Request by Zuyan Wang. (Prem)" REVISION "201501190000Z" -- 19 Jan 2015 DESCRIPTION "Version 36: Added rcMltPeerMembersList to deprecate/obsoltete rcMltPeerMembers" REVISION "201406180000Z" -- 18 June 2014 DESCRIPTION "Version 35: remove rcMltVirtualIstEnable and add virtualIstMlt to the rcMltMltType" REVISION "201406120000Z" -- 12 June 2014 DESCRIPTION "Version 34: Added rcMltVirtualIstEnable" REVISION "201403010000Z" -- 01 March 2014 DESCRIPTION "Version 33: Added rcStatSmltPortTblSyncReqTxMsgCnt rcStatSmltPortTblSyncReqRxMsgCnt rcStatSmltPortTblSyncTxMsgCnt rcStatSmltPortTblSyncRxMsgCnt rcStatSmltPortUpdateTxMsgCnt rcStatSmltPortUpdateRxMsgCnt rcStatSmltEntryUpdateTxMsgCnt rcStatSmltEntryUpdateRxMsgCnt rcStatSmltDialectNegotiateTxMsgCnt rcStatSmltDialectNegotiateRxMsgCnt rcStatSmltUpdateRespTxMsgCnt rcStatSmltUpdateRespRxMsgCnt rcStatSmltTransQHighWaterMarkMsgCnt rcStatSmltPollCountHighWaterMarkCnt" REVISION "201307150000Z" -- 15 July 2013 DESCRIPTION "Version 32: Added rcMltBpduMode." REVISION "201305280000Z" -- 28 May 2013 DESCRIPTION "Version 31: Added rcStatSmltSpbmInfoTxMsgCnt, rcStatSmltSpbmInfoFailTxMsgCnt, rcStatSmltSpbmInfoRxMsgCnt, rcStatSmltSpbmLearnMacRxMsgCnt, rcStatSmltSpbmLearnMacTxMsgCnt, rcStatSmltSpbmDelMacRxMsgCnt, rcStatSmltSpbmDelMacTxMsgCnt, rcStatSmltSpbmMacAgeOutRxMsgCnt, rcStatSmltSpbmMacAgeOutTxMsgCnt, rcStatSmltSpbmMacTblRxMsgCnt." REVISION "201303180000Z" -- 18 Mar 2013 DESCRIPTION "Version 30: Added enum value - none, changed normal to trunk and changed DEFVAL to none under rcMltPrivateVlanType" REVISION "201212210000Z" -- 21 Dec 2012 DESCRIPTION "Version 29: added rcMltPrivateVlanType" REVISION "201210240000Z" -- 24 October 2012 DESCRIPTION "Version 28: Renamed enumeration rtag7(4) in rcMltDistributionAlgorithm to enhanced(4)." REVISION "201210040000Z" -- 04 October 2012 DESCRIPTION "Version 27: Added enumeration rtag7(4) to rcMltDistributionAlgorithm." REVISION "201208030000Z" -- 03 August 2012 DESCRIPTION "Version 26: Changed the range of rcMltIstVlanId from 1..4095 to 0..4095. 0 was added in ERS 7.2. Vlan id of 0 indicates deletion of the vlan" REVISION "201103150000Z" -- 15 March 2011 DESCRIPTION "Version 25: Added rcMltL4Hash." REVISION "201101270000Z" -- 27 January 2011 DESCRIPTION "Version 24: Added rcStatMltIfExtnIfHCInLsmPkts, rcStatMltIfExtnIfHCOutLsmPkts." REVISION "201101060000Z" -- 06 January 2011 DESCRIPTION "Version 23: Added rcMltIstStpEnable." REVISION "201010200000Z" -- 20 October 2010 DESCRIPTION "Version 22: Added rcStatMltUtilTable." REVISION "201009210000Z" -- 21 September 2010 DESCRIPTION "Version 21: Added rcMltEntryOwner, rcMltDatapathProgrammingState to rcMltTable." REVISION "201009140000Z" -- 14 September 2010 DESCRIPTION "Version 20: Increased MLT ID range for rcStatMltIfExtnMltId, rcStatMltEtherMltId. rcMltId, rcMltSmltId. Added: rcMltPeerPortMembers, rcMltCpLimitPktRate, rcMltCpLimitShutDownEnable, rcMltVlanIdList to rcMltTable. Added: synchronizeInProgress(11) to rcL2RedundancyHaCpuState." REVISION "200912160000Z" -- 16 December 2009 DESCRIPTION "Version 19: Added rcMltDisablePortsOnShutdown." REVISION "200911160000Z" -- 16 November 2009 DESCRIPTION "Version 18: Added rcStatSmltLacpInfoRxMsgCnt, rcStatSmltLacpInfoTxMsgCnt." REVISION "200903200000Z" -- 20 March 2009 DESCRIPTION "Version 17: Added rcMltMtu, rcMltInterfaceType, rcMltConfiguredMembers, rcMltMtuAdminState." REVISION "200712200000Z" -- 20 December 2007 DESCRIPTION "Version 16: Added rcMltAggMinLink, rcMltNotificationObjects, rcMltAggTrapEvent" REVISION "200704160000Z" -- 16 April 2007 DESCRIPTION "Version 15: Added rcMltEgressCosProfileName, rcMltEgressPolicerAdminState, rcMltAggrEgressBandwidth, rcMltAggrIngressBandwidth, rcMltAggrMacAlloc Modified rcMltLoadDistributionOption and rcMltUniAggrMacIdx" REVISION "200607050000Z" -- 05 July 2006 DESCRIPTION "Version 14: Added rcMltLoadDistributionOption, rcMltUniAggrMacIdx, rcMltUniAggrMacAddress and rcMltQinqEtherType to rcMltTable. Added rcMltBvidPortTable" REVISION "200512060000Z" -- 06 Dec 2005 DESCRIPTION "Version 13: Changed range of rcMltSmltId to 0..256." REVISION "200509010000Z" -- 01 Sep 2005 DESCRIPTION "Version 12: Changed rcMltEnable from read-only to read-create. Changed all read-write objects in rcMltTable to read-create." REVISION "200508100000Z" -- 10 Aug 2005 DESCRIPTION "Version 11: Increased to rcMltId & rcMltSmltId from 32 to 256" REVISION "200507110000Z" -- 11 July 2005 DESCRIPTION "Version 10: Added enumerations to rcMltDistributionAlgorithm." REVISION "200505270000Z" -- 05 Apr 2005 DESCRIPTION "Version 9: Fixed range of rcMltVlanIds, allow rcMltIfIndex to be 0." REVISION "200502020000Z" -- 02 Feb 2005 DESCRIPTION "Version 8: Changed the SYNTAX for rcStatMltIfUtilIfHCInUtil & rcStatMltIfUtilIfHCOutUtil to Gauge32" REVISION "200501040000Z" -- 04 Jan 2005 DESCRIPTION "Version 7: Made Index rcStatMltIfUtilMltId as not-accessible" REVISION "200412210000Z" -- 21 Dec 2004 DESCRIPTION "Version 6: Added rcStatMltIfUtilTable" REVISION "200409300000Z" -- 30 Sept 2004 DESCRIPTION "Version 5: Import MacAddress type" REVISION "200409230000Z" -- 23 Sept 2004 DESCRIPTION "Version 4: Added rcMltVlacpTable" REVISION "200407130000Z" -- 13 July 2004 DESCRIPTION "Version 3: Added rcMltVlacpTable" ::= { rcMlt 0 } -- rcStatMlt Group rcStatMlt OBJECT IDENTIFIER ::= { rcStat 6 } rcStatMltIfExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltIfExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to store Mlt interface statistics." ::= { rcStatMlt 1 } rcStatMltIfExtnEntry OBJECT-TYPE SYNTAX RcStatMltIfExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mlt interface statistics" INDEX { rcStatMltIfExtnMltId } ::= { rcStatMltIfExtnTable 1 } RcStatMltIfExtnEntry ::= SEQUENCE { rcStatMltIfExtnMltId Integer32, rcStatMltIfExtnIfInMulticastPkts Counter32, rcStatMltIfExtnIfInBroadcastPkts Counter32, rcStatMltIfExtnIfOutMulticastPkts Counter32, rcStatMltIfExtnIfOutBroadcastPkts Counter32, rcStatMltIfExtnIfHCInOctets Counter64, rcStatMltIfExtnIfHCInUcastPkts Counter64, rcStatMltIfExtnIfHCInMulticastPkt Counter64, rcStatMltIfExtnIfHCInBroadcastPkt Counter64, rcStatMltIfExtnIfHCOutOctets Counter64, rcStatMltIfExtnIfHCOutUcastPkts Counter64, rcStatMltIfExtnIfHCOutMulticast Counter64, rcStatMltIfExtnIfHCOutBroadcast Counter64, rcStatMltIfExtnIfHCInLsmPkts Counter64, rcStatMltIfExtnIfHCOutLsmPkts Counter64 } rcStatMltIfExtnMltId OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "Mlt Id" ::= { rcStatMltIfExtnEntry 1 } rcStatMltIfExtnIfInMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "multi-pkts to upper" ::= { rcStatMltIfExtnEntry 2 } rcStatMltIfExtnIfInBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "broad-pkts to upper" ::= { rcStatMltIfExtnEntry 3 } rcStatMltIfExtnIfOutMulticastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "multi-pkts from upper" ::= { rcStatMltIfExtnEntry 4 } rcStatMltIfExtnIfOutBroadcastPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "broad-pkts from upper" ::= { rcStatMltIfExtnEntry 5 } rcStatMltIfExtnIfHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the MLT interface, including framing characters." ::= { rcStatMltIfExtnEntry 6 } rcStatMltIfExtnIfHCInUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer." ::= { rcStatMltIfExtnEntry 7 } rcStatMltIfExtnIfHCInMulticastPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Group and Functional addresses." ::= { rcStatMltIfExtnEntry 8 } rcStatMltIfExtnIfHCInBroadcastPkt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer." ::= { rcStatMltIfExtnEntry 9 } rcStatMltIfExtnIfHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the MLT interface, including framing characters." ::= { rcStatMltIfExtnEntry 10 } rcStatMltIfExtnIfHCOutUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number includes those packets discarded or unsent." ::= { rcStatMltIfExtnEntry 11 } rcStatMltIfExtnIfHCOutMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those that were discarded or not sent. For a MAC layer protocol, this number includes both Group and Functional addresses." ::= { rcStatMltIfExtnEntry 12 } rcStatMltIfExtnIfHCOutBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those that were discarded or not sent." ::= { rcStatMltIfExtnEntry 13 } rcStatMltIfExtnIfHCInLsmPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Messaging (LSM) packets delivered to this MLT." ::= { rcStatMltIfExtnEntry 14 } rcStatMltIfExtnIfHCOutLsmPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Link State Messaging (LSM) packets trasmitted on this MLT." ::= { rcStatMltIfExtnEntry 15 } -- Mlt Ether table rcStatMltEtherTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to store Mlt Ethernet statistics." ::= { rcStatMlt 2 } rcStatMltEtherEntry OBJECT-TYPE SYNTAX RcStatMltEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mlt enternet statistics" INDEX { rcStatMltEtherMltId } ::= { rcStatMltEtherTable 1 } RcStatMltEtherEntry ::= SEQUENCE { rcStatMltEtherMltId Integer32, rcStatMltEtherAlignmentErrors Counter32, rcStatMltEtherFCSErrors Counter32, rcStatMltEtherSingleCollFrames Counter32, rcStatMltEtherMultipleCollFrames Counter32, rcStatMltEtherSQETestError Counter32, rcStatMltEtherDeferredTransmiss Counter32, rcStatMltEtherLateCollisions Counter32, rcStatMltEtherExcessiveCollis Counter32, rcStatMltEtherIMacTransmitError Counter32, rcStatMltEtherCarrierSenseError Counter32, rcStatMltEtherFrameTooLong Counter32, rcStatMltEtherIMacReceiveError Counter32 } rcStatMltEtherMltId OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the Multi-Link Trunk associated with this entry." ::= { rcStatMltEtherEntry 1 } rcStatMltEtherAlignmentErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." ::= { rcStatMltEtherEntry 2 } rcStatMltEtherFCSErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." ::= { rcStatMltEtherEntry 3 } rcStatMltEtherSingleCollFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this objects is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and it not counted by the corresponding instance of the MultipleCollisionFrames object." ::= { rcStatMltEtherEntry 4 } rcStatMltEtherMultipleCollFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the SingleCollisionFrames objects." ::= { rcStatMltEtherEntry 5 } rcStatMltEtherSQETestError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error." ::= { rcStatMltEtherEntry 6 } rcStatMltEtherDeferredTransmiss OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions." ::= { rcStatMltEtherEntry 7 } rcStatMltEtherLateCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 mb/s system. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics." ::= { rcStatMltEtherEntry 8 } rcStatMltEtherExcessiveCollis OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which transmission on a particular MLT fails due to excessive collisions." ::= { rcStatMltEtherEntry 9 } rcStatMltEtherIMacTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the LateCollisions object, the ExcessiveCollisions object, or the CarrierSenseError object." ::= { rcStatMltEtherEntry 10 } rcStatMltEtherCarrierSenseError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented by an instance of this object is incremented at most once per transmission attempt, even if the carrier sense condition fluctuates during a transmission attempt." ::= { rcStatMltEtherEntry 11 } rcStatMltEtherFrameTooLong OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is incremented when the frame TooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions occur are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC." ::= { rcStatMltEtherEntry 12 } rcStatMltEtherIMacReceiveError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the FrameTooLongs object, the AlignmentErrors object, of the FCSErrors objects. The precise meaning of the count represented by an instance of this object is implementation specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted." ::= { rcStatMltEtherEntry 13 } -- Mlt Ip table rcStatMltIpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltIpEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table used to store Mlt Ip statistics." ::= { rcStatMlt 3 } rcStatMltIpEntry OBJECT-TYPE SYNTAX RcStatMltIpEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Mlt enternet statistics" INDEX { rcStatMltIpMltId } ::= { rcStatMltIpTable 1 } RcStatMltIpEntry ::= SEQUENCE { rcStatMltIpMltId Integer32, rcStatMltIpInReceives Counter32, rcStatMltIpInHdrErrors Counter32, rcStatMltIpInAddrErrors Counter32, rcStatMltIpForwDatagrams Counter32, rcStatMltIpInUnknownProtos Counter32, rcStatMltIpInDiscards Counter32, rcStatMltIpInDelivers Counter32, rcStatMltIpOutRequest Counter32, rcStatMltIpOutDiscards Counter32, rcStatMltIpOutNoRoutes Counter32, rcStatMltIpReasmReqds Counter32, rcStatMltIpReasmOKs Counter32, rcStatMltIpReasmFails Counter32, rcStatMltIpFragOKs Counter32, rcStatMltIpFragFails Counter32, rcStatMltIpFragCreates Counter32, rcStatMltIpRoutingDiscards Counter32 } rcStatMltIpMltId OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Mlt Id" ::= { rcStatMltIpEntry 1 } rcStatMltIpInReceives OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "all incoming packets" ::= { rcStatMltIpEntry 2 } rcStatMltIpInHdrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "hdr errors detected" ::= { rcStatMltIpEntry 3 } rcStatMltIpInAddrErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "bad dest. ip addr" ::= { rcStatMltIpEntry 4 } rcStatMltIpForwDatagrams OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "packets forwarded" ::= { rcStatMltIpEntry 5 } rcStatMltIpInUnknownProtos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "unsupported protocol" ::= { rcStatMltIpEntry 6 } rcStatMltIpInDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "good, but no buffer" ::= { rcStatMltIpEntry 7 } rcStatMltIpInDelivers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "pkts delivered to upper" ::= { rcStatMltIpEntry 8 } rcStatMltIpOutRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "pkts received from upper" ::= { rcStatMltIpEntry 9 } rcStatMltIpOutDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "good, but no buffer" ::= { rcStatMltIpEntry 10 } rcStatMltIpOutNoRoutes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "no route to destination" ::= { rcStatMltIpEntry 11 } rcStatMltIpReasmReqds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "fragments to reassem" ::= { rcStatMltIpEntry 12 } rcStatMltIpReasmOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "reassembled successfully" ::= { rcStatMltIpEntry 13 } rcStatMltIpReasmFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "reassembly failures" ::= { rcStatMltIpEntry 14 } rcStatMltIpFragOKs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "fragment successfully" ::= { rcStatMltIpEntry 15 } rcStatMltIpFragFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "fragment failure" ::= { rcStatMltIpEntry 16 } rcStatMltIpFragCreates OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "pkts due to fragmenting" ::= { rcStatMltIpEntry 17 } rcStatMltIpRoutingDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Route entries removed" ::= { rcStatMltIpEntry 18 } -- SMLT IST rcStatSmltIstDownCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts how the session between the two peering switches has done down since last boot." ::= { rcStatMlt 4 } rcStatSmltHelloTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx hello msg." ::= { rcStatMlt 5 } rcStatSmltHelloRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx hello msg." ::= { rcStatMlt 6 } rcStatSmltLearnMacAddrTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx learn Mac Address msg." ::= { rcStatMlt 7 } rcStatSmltLearnMacAddrRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx learn Mac Address msg." ::= { rcStatMlt 8 } rcStatSmltMacAddrAgeOutTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Mac Address Aging Out msg." ::= { rcStatMlt 9 } rcStatSmltMacAddrAgeOutRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Mac Address Aging Out msg." ::= { rcStatMlt 10 } rcStatSmltMacAddrAgeExpTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Mac Address age expired msg." ::= { rcStatMlt 11 } rcStatSmltMacAddrAgeExpRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Mac Address age expired msg." ::= { rcStatMlt 12 } rcStatSmltStgInfoTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Stg information msg." ::= { rcStatMlt 13 } rcStatSmltStgInfoRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Stg information msg." ::= { rcStatMlt 14 } rcStatSmltDelMacAddrTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx deleted MAC address msg." ::= { rcStatMlt 15 } rcStatSmltDelMacAddrRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx deleted MAC address msg." ::= { rcStatMlt 16 } rcStatSmltSmltDownTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Smlt Down msg." ::= { rcStatMlt 17 } rcStatSmltSmltDownRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Smlt Down msg." ::= { rcStatMlt 18 } rcStatSmltSmltUpTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Smlt Up msg." ::= { rcStatMlt 19 } rcStatSmltSmltUpRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Smlt Up msg." ::= { rcStatMlt 20 } rcStatSmltSendMacTblTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Send Mac Table msg." ::= { rcStatMlt 21 } rcStatSmltSendMacTblRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Send Mac Table msg." ::= { rcStatMlt 22 } rcStatSmltIgmpTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx Igmp msg." ::= { rcStatMlt 23 } rcStatSmltIgmpRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx Igmp msg." ::= { rcStatMlt 24 } rcStatSmltPortDownTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx port down msg." ::= { rcStatMlt 25 } rcStatSmltPortDownRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx port down msg." ::= { rcStatMlt 26 } rcStatSmltReqMacTblTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the tx request Mac table msg." ::= { rcStatMlt 27 } rcStatSmltReqMacTblRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx request Mac table msg." ::= { rcStatMlt 28 } rcStatSmltRxUnknownMsgTypeCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counters that counts the rx unknown msg type." ::= { rcStatMlt 29 } rcStatMltIfUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltIfUtilEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to store Mlt interface utilization." ::= { rcStatMlt 30 } rcStatMltIfUtilEntry OBJECT-TYPE SYNTAX RcStatMltIfUtilEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mlt interface utilization" INDEX { rcStatMltIfUtilMltId } ::= { rcStatMltIfUtilTable 1 } RcStatMltIfUtilEntry ::= SEQUENCE { rcStatMltIfUtilMltId Integer32, rcStatMltIfUtilIfHCInOctets Counter64, rcStatMltIfUtilIfHCInUtil Gauge32, rcStatMltIfUtilIfHCOutOctets Counter64, rcStatMltIfUtilIfHCOutUtil Gauge32 } rcStatMltIfUtilMltId OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "To assign an Id within the range specified to the Mlt created " ::= { rcStatMltIfUtilEntry 1 } rcStatMltIfUtilIfHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the MLT interface, including framing characters." ::= { rcStatMltIfUtilEntry 2 } rcStatMltIfUtilIfHCInUtil OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the mean physical layer network utilization on this interface during this interval, in percent." ::= { rcStatMltIfUtilEntry 3} rcStatMltIfUtilIfHCOutOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the MLT interface, including framing characters." ::= { rcStatMltIfUtilEntry 4 } rcStatMltIfUtilIfHCOutUtil OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the mean physical layer network utilization on this interface during this interval, in percent." ::= { rcStatMltIfUtilEntry 5 } rcStatSmltLacpInfoRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "LACP info msgs received." ::= { rcStatMlt 31 } rcStatSmltLacpInfoTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "LACP info msgs transmitted." ::= { rcStatMlt 32 } -- MLT utilization statistics per port rcStatMltUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF RcStatMltUtilEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table used to store statistics for MLT members utilization." ::= { rcStatMlt 33 } rcStatMltUtilEntry OBJECT-TYPE SYNTAX RcStatMltUtilEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for MLT members utilization statistics table." INDEX { rcMltId, rcStatMltUtilPortIfIndex, rcStatMltUtilTrafficType } ::= { rcStatMltUtilTable 1 } RcStatMltUtilEntry ::= SEQUENCE { rcStatMltUtilPortIfIndex InterfaceIndex, rcStatMltUtilTrafficType INTEGER, rcStatMltUtilTrafficLast5Min Gauge32, rcStatMltUtilTrafficLast30Min Gauge32, rcStatMltUtilTrafficLast1Hour Gauge32 } rcStatMltUtilPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port ifIndex, member of rcMltId." ::= { rcStatMltUtilEntry 1 } rcStatMltUtilTrafficType OBJECT-TYPE SYNTAX INTEGER { rx(1), tx(2), rxTx(3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of traffic for one MLT port interface." ::= { rcStatMltUtilEntry 2 } rcStatMltUtilTrafficLast5Min OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the percentage of traffic on one MLT port interface for the last 5 minutes." ::= { rcStatMltUtilEntry 3 } rcStatMltUtilTrafficLast30Min OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the percentage of traffic on one MLT port interface for the last 30 minutes." ::= { rcStatMltUtilEntry 4 } rcStatMltUtilTrafficLast1Hour OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the percentage of traffic on one MLT port interface for the last hour." ::= { rcStatMltUtilEntry 5 } rcStatSmltSpbmInfoTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM information tx messages." ::= { rcStatMlt 34 } rcStatSmltSpbmInfoFailTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM information Fail tx messages." ::= { rcStatMlt 35 } rcStatSmltSpbmInfoRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM information rx messages." ::= { rcStatMlt 36 } rcStatSmltSpbmLearnMacRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM learn Mac rx messages." ::= { rcStatMlt 37 } rcStatSmltSpbmLearnMacTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM learn Mac tx messages." ::= { rcStatMlt 38 } rcStatSmltSpbmDelMacRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM delete Mac rx messages." ::= { rcStatMlt 39 } rcStatSmltSpbmDelMacTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM delete Mac tx messages." ::= { rcStatMlt 40 } rcStatSmltSpbmMacAgeOutRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM Mac Aging Out rx messages." ::= { rcStatMlt 41 } rcStatSmltSpbmMacAgeOutTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM Mac Aging Out tx messages." ::= { rcStatMlt 42 } rcStatSmltSpbmMacTblRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of SPBM Mac Table rx messages." ::= { rcStatMlt 43 } rcStatSmltPortTblSyncReqTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt table sync request tx msg counter" ::= { rcStatMlt 44 } rcStatSmltPortTblSyncReqRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt table sync request rx msg counter" ::= { rcStatMlt 45 } rcStatSmltPortTblSyncTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt table sync tx msg counter" ::= { rcStatMlt 46} rcStatSmltPortTblSyncRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt table sync rx msg counter" ::= { rcStatMlt 47 } rcStatSmltPortUpdateTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt port update tx msg counter" ::= { rcStatMlt 48 } rcStatSmltPortUpdateRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt port update rx msg counter" ::= { rcStatMlt 49 } rcStatSmltEntryUpdateTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt Entry update tx msg counter" ::= { rcStatMlt 50 } rcStatSmltEntryUpdateRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt Entry update rx msg counter" ::= { rcStatMlt 51 } rcStatSmltDialectNegotiateTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt protocol ID tx msg counter" ::= { rcStatMlt 52 } rcStatSmltDialectNegotiateRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt protocol ID rx msg counter" ::= { rcStatMlt 53 } rcStatSmltUpdateRespTxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt update response tx msg counter" ::= { rcStatMlt 54 } rcStatSmltUpdateRespRxMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt update response rx msg counter" ::= { rcStatMlt 55 } rcStatSmltTransQHighWaterMarkMsgCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt transaction Queue high watermark msg count" ::= { rcStatMlt 56 } rcStatSmltPollCountHighWaterMarkCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Smlt poll count high watermark count" ::= { rcStatMlt 57 } -- Multi-Link Trunking Table rcMltNumMlts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of MLTs currently defined in the switch." ::= { rcMlt 1 } rcMltPotentialMembers OBJECT-TYPE SYNTAX PortSet MAX-ACCESS read-only STATUS current DESCRIPTION "The set of ports that are not members of any MLT." ::= { rcMlt 2 } rcMltIstSessionEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable/disable mlt functionality." ::= { rcMlt 3 } rcMltIstSessionStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used to enable/disable mlt functionality." ::= { rcMlt 4 } rcMltIstPeerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IST mlt Peer Ip address." ::= { rcMlt 5 } rcMltIstVlanId OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "IST mlt Vlan Id." ::= { rcMlt 6 } rcMltDisablePortsOnShutdown OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When true(1), the port members of an MLT will be automatically shutdown when the MLT becomes disabled." ::= { rcMlt 7 } rcMltTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Multi-Link Trunk entries. The number of entries is given by rcMltNumMlts." ::= { rcMlt 10 } rcMltEntry OBJECT-TYPE SYNTAX RcMltEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing configuration information for a particular Multi-Link Trunk." INDEX { rcMltId } ::= { rcMltTable 1 } RcMltEntry ::= SEQUENCE { rcMltId Integer32, rcMltName DisplayString, rcMltPortMembers PortSet, rcMltPortType INTEGER, rcMltNumVlanIds Integer32, rcMltVlanIds IdList, rcMltRowStatus RowStatus, rcMltEnable TruthValue, rcMltLoadBalance TruthValue, rcMltDistributionAlgorithm INTEGER, rcMltIfIndex InterfaceIndexOrZero, rcMltMltType INTEGER, rcMltSmltId Integer32, rcMltRunningType INTEGER, rcMltSvlanPortType INTEGER, rcMltMulticastDistribution EnableValue, rcMltLacp10gBackup EnableValue, rcMltAggregatable EnableValue, rcMltClearLinkAggregate INTEGER, rcMltNtStgEnable TruthValue, rcMltDesignatedPort InterfaceIndex, rcMltAggOperState EnableValue, rcMltAggTimeOfLastOperChange TimeTicks, rcMltVplsMgmtVlan EnableValue, rcMltLoadDistributionOption INTEGER, rcMltUniAggrMacIdx Integer32, rcMltUniAggrMacAddress MacAddress, rcMltQinqEtherType Integer32, rcMltEgressCosProfileName DisplayString, rcMltEgressPolicerAdminState EnableValue, rcMltAggrEgressBandwidth EnableValue, rcMltAggrIngressBandwidth EnableValue, rcMltAggrMacAlloc EnableValue, rcMltAggMinLink Integer32, rcMltMtu Integer32, rcMltInterfaceType INTEGER, rcMltConfiguredMembers PortSet, rcMltMtuAdminState EnableValue, rcMltPeerPortMembers PortSet, rcMltCpLimitPktRate Integer32, rcMltCpLimitShutDownEnable TruthValue, rcMltVlanIdList OCTET STRING, rcMltEntryOwner INTEGER, rcMltDatapathProgrammingState INTEGER, rcMltL4Hash EnableValue, rcMltPrivateVlanType INTEGER, rcMltBpduMode INTEGER, rcMltPeerPortMembersList DisplayString, rcMltFlexUniEnable TruthValue } rcMltId OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "A value that uniquely identifies the Multi-Link Trunk associated with this entry." ::= { rcMltEntry 1 } rcMltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively-assigned name for this MLT." ::= { rcMltEntry 2 } rcMltPortMembers OBJECT-TYPE SYNTAX PortSet MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports that are members of this MLT." ::= { rcMltEntry 3 } rcMltPortType OBJECT-TYPE SYNTAX INTEGER { access(1), -- access port type trunk(2) -- trunk port type } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of MLT port: access(1) or trunk(2)." DEFVAL { access } ::= { rcMltEntry 4 } rcMltNumVlanIds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable." ::= { rcMltEntry 5 } rcMltVlanIds OBJECT-TYPE SYNTAX IdList (SIZE (0..8192)) MAX-ACCESS read-create STATUS current DESCRIPTION "An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet in the pair holds bits 15-8 of the VLAN ID, while the second octet holds bits 7-0 of the VLAN ID." ::= { rcMltEntry 6 } rcMltRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries in the rcMltTable." ::= { rcMltEntry 7 } rcMltEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable the entry." DEFVAL { true } ::= { rcMltEntry 8 } rcMltLoadBalance OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Perform load balance?" DEFVAL { false } ::= { rcMltEntry 9 } rcMltDistributionAlgorithm OBJECT-TYPE SYNTAX INTEGER { none(1), basic(2), advanced(3), enhanced(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The load balancing algorithm." DEFVAL { none } ::= { rcMltEntry 10 } rcMltIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the 'logical' ifIndex assigned to this MLT." ::= { rcMltEntry 11 } rcMltMltType OBJECT-TYPE SYNTAX INTEGER { normalMLT(1), istMLT(2), splitMLT(3), virtualIstMlt(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "MLT type. virtaulIstMlt(4) to Enable/Disable Virtual IST on an MLT. Virtual IST on an MLT can only be enabled when spbm-config-mode boot flag is disabled" ::= { rcMltEntry 12 } rcMltSmltId OBJECT-TYPE SYNTAX Integer32 (0..512) MAX-ACCESS read-create STATUS current DESCRIPTION "Split MLT id." ::= { rcMltEntry 13 } rcMltRunningType OBJECT-TYPE SYNTAX INTEGER { normalMLT(1), istMLT(2), splitMLT(3), virtualIstMlt(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Split MLT running type." ::= { rcMltEntry 14 } rcMltSvlanPortType OBJECT-TYPE SYNTAX INTEGER { normal(1), uni(2), nni(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set MLT port type." DEFVAL { normal } ::= { rcMltEntry 15 } rcMltMulticastDistribution OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable multicast distribution per mlt." DEFVAL { disable } ::= { rcMltEntry 16 } rcMltLacp10gBackup OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable 10G Mlt reliance backup mode." DEFVAL { disable } ::= { rcMltEntry 17 } rcMltAggregatable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/Disable link aggregation on a MLT." DEFVAL { disable } ::= { rcMltEntry 18 } rcMltClearLinkAggregate OBJECT-TYPE SYNTAX INTEGER { clear(1), none(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT." ::= { rcMltEntry 19 } rcMltNtStgEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode." DEFVAL { true } ::= { rcMltEntry 20 } rcMltDesignatedPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Designated port for the MLT." ::= { rcMltEntry 21 } rcMltAggOperState OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-only STATUS current DESCRIPTION "Link aggregation state on a MLT." ::= { rcMltEntry 22 } rcMltAggTimeOfLastOperChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time value since the interface entered its current operational state." ::= { rcMltEntry 23 } rcMltVplsMgmtVlan OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Management Vlan is configured on this mlt" DEFVAL { disable } ::= { rcMltEntry 24 } rcMltLoadDistributionOption OBJECT-TYPE SYNTAX INTEGER { bmac(1), cmac(2), bvid(3), isid(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Used to specify the Load Balancing option for MLT in UNI" DEFVAL { bmac } ::= { rcMltEntry 25 } rcMltUniAggrMacIdx OBJECT-TYPE SYNTAX Integer32 (0..448) MAX-ACCESS read-create STATUS current DESCRIPTION "Used to specify the index of the mac address pool reserved for MLT uni" DEFVAL { 0 } ::= { rcMltEntry 26 } rcMltUniAggrMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Used to display the mac address reserved for this MLT" ::= { rcMltEntry 27 } rcMltQinqEtherType OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ service UNI. Otherwise, it would be ignored" DEFVAL { '8020'h } ::= { rcMltEntry 28 } rcMltEgressCosProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "Mlt Egress COS Profile Name, which is defined by rcCosProfileTable" DEFVAL { "DEFAULT_PORT_PROFILE" } ::= { rcMltEntry 29 } rcMltEgressPolicerAdminState OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable Mlt Egress Policer" DEFVAL { disable } ::= { rcMltEntry 30 } rcMltAggrEgressBandwidth OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregated Egress Bandwidth Policer is used." DEFVAL { enable } ::= { rcMltEntry 31 } rcMltAggrIngressBandwidth OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregated Ingress Bandwidth Policer is used." DEFVAL { enable } ::= { rcMltEntry 32 } rcMltAggrMacAlloc OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Aggregated Mac Allocation is used" DEFVAL { disable } ::= { rcMltEntry 33 } rcMltAggMinLink OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "If number of active links goes below configured minimum-link number, the entire LAG is declared down." ::= { rcMltEntry 34 } rcMltMtu OBJECT-TYPE SYNTAX Integer32 (1518..9600) MAX-ACCESS read-create STATUS current DESCRIPTION "MTU for ports in Mlt" DEFVAL { 1518 } ::= { rcMltEntry 35 } rcMltInterfaceType OBJECT-TYPE SYNTAX INTEGER { normal(1), silent(2), uni(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This value indicates whether ports in the mlt are of type . A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is set to silent. Before adding a port to a VLAN the interface type should be changed to normal." DEFVAL { silent } ::= { rcMltEntry 36 } rcMltConfiguredMembers OBJECT-TYPE SYNTAX PortSet MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These port get added as ConfiguredMembers" ::= { rcMltEntry 37 } rcMltMtuAdminState OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set Mlt MTU enable or disable" DEFVAL { disable } ::= { rcMltEntry 38 } rcMltPeerPortMembers OBJECT-TYPE SYNTAX PortSet MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT. This object has been deprecated/obsolete by object rcMltPeerPortMembersList" ::= { rcMltEntry 39 } rcMltCpLimitPktRate OBJECT-TYPE SYNTAX Integer32(1000..20000) MAX-ACCESS read-create STATUS current DESCRIPTION "Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second." DEFVAL { 8000 } ::= { rcMltEntry 40 } rcMltCpLimitShutDownEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded." DEFVAL { false } ::= { rcMltEntry 41 } rcMltVlanIdList OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..512)) MAX-ACCESS read-create STATUS current DESCRIPTION "This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1." ::= { rcMltEntry 42 } rcMltEntryOwner OBJECT-TYPE SYNTAX INTEGER { none(1), local(2), remote(3), localAndRemote(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the owner of the MLT." ::= { rcMltEntry 43 } rcMltDatapathProgrammingState OBJECT-TYPE SYNTAX INTEGER { none(1), local(2), remote(3), localAndRemote(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the datapath programming state of the MLT." ::= { rcMltEntry 44 } rcMltL4Hash OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-create STATUS current DESCRIPTION "If enabled all the non fragmented L4 packets will take L4 hashing and all the fragmented L4 packets and L3 packets will take L3 hashing. If disabled then both L3 and L4 packets will take L3 hashing. It is introduce by release 5.1.6.0" DEFVAL { disable } ::= { rcMltEntry 45 } rcMltPrivateVlanType OBJECT-TYPE SYNTAX INTEGER { trunk(1), isolated(2), promiscuous(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode used when private VLAN is associated with MLT. If the VLAN is not private then this is ignored. If the VLAN is private then the value must be either trunk, isolated, or promiscuous. Setting the value to trunk will enable tagging. Setting the value to isolated or promiscuous will remove non-private VLANs from the mlt." DEFVAL { none } ::= { rcMltEntry 46 } rcMltBpduMode OBJECT-TYPE SYNTAX INTEGER { all-ports(1), single-port(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the BPDU send/receive mode: send/receive BPDUs on all trunk ports (1) or on a single trunk port (2)." DEFVAL { all-ports } ::= { rcMltEntry 47 } rcMltPeerPortMembersList OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A list of peer ports in the display format slot/port,slot/port/sub-port. A port display format cannot be always hardcoded as slot/port. It depends on the dynamic setting of the port, such as channelized. This object is used to deprecate/obsolete the object of rcMltPeerPortMembers." ::= { rcMltEntry 48} rcMltFlexUniEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to set Flex UNI enable/disable on MLT" DEFVAL { false } ::= { rcMltEntry 49 } rcMltMcastDistribution OBJECT IDENTIFIER ::= { rcMlt 11 } rcMltMcastDistributionEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable/disable this feature to distribute multicast traffic on MLT ports. All the cards in the system must be E-Tickets. Cannot perform distribution in a mixed mode." ::= { rcMltMcastDistribution 1 } rcMltMcastDistributionGrpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Group Mask. Create a MLT abstraction layer to distribute traffic basd on (source, group) information of the multicast packet. The algorithm to pick the actual port nedds to generate a fairly random number for different combinations but a lways generate the same number for a given (source, group) pair. By default, the number of active ports of the MLT is used to MOD the pseudo-random number generated by the XOR of each byte of the masked group address with the masked source address." ::= { rcMltMcastDistribution 2 } rcMltMcastDistributionSrcMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Source Mask." ::= { rcMltMcastDistribution 3 } rcMltMcastDistributionRedistributionEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable redistribution." ::= { rcMltMcastDistribution 4 } -- Single Link Trunk Port Table rcSltPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcSltPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing config info for SLT" ::= { rcMlt 12 } rcSltPortEntry OBJECT-TYPE SYNTAX RcSltPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing configuration information for a particular Multi-Link Trunk." INDEX { rcSltPortIfIndex } ::= { rcSltPortTable 1 } RcSltPortEntry ::= SEQUENCE { rcSltPortIfIndex InterfaceIndex, rcSltPortSmltId Integer32, rcSltPortOperType INTEGER, rcSltPortRowStatus RowStatus } rcSltPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An interface for this SLT." ::= { rcSltPortEntry 1 } rcSltPortSmltId OBJECT-TYPE SYNTAX Integer32 (1..512) MAX-ACCESS read-create STATUS current DESCRIPTION "A uniquely identifies the Single-Link Trunk associated with this entry." ::= { rcSltPortEntry 2 } rcSltPortOperType OBJECT-TYPE SYNTAX INTEGER { normal(1), smlt(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operate type of the port normal or smlt." ::= { rcSltPortEntry 3 } rcSltPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries of the Table." ::= { rcSltPortEntry 4 } -- rcMltVlacpTable rcMltVlacpTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMltVlacpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mlt Virtual LACP table" ::= { rcMlt 13 } rcMltVlacpEntry OBJECT-TYPE SYNTAX RcMltVlacpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing info. for a particular port" INDEX { rcMltId } ::= { rcMltVlacpTable 1 } RcMltVlacpEntry ::= SEQUENCE { rcMltVlacpAdminEnable TruthValue, rcMltVlacpFastPeriodicTimer Integer32, rcMltVlacpTimeoutScale Integer32, rcMltVlacpEtherMacAddress MacAddress, rcMltVlacpDualHomingEnable TruthValue } rcMltVlacpAdminEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively enable/disable Virtual LACP on a MLT" DEFVAL { false } ::= { rcMltVlacpEntry 1 } rcMltVlacpFastPeriodicTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of miliseconds between periodic transmissions using Short Timeouts" DEFVAL { 250 } ::= { rcMltVlacpEntry 2 } rcMltVlacpTimeoutScale OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale" DEFVAL { 3 } ::= { rcMltVlacpEntry 3 } rcMltVlacpEtherMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Multicast Mac Address exclusively used for VLACPDU's" ::= { rcMltVlacpEntry 4 } rcMltVlacpDualHomingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable Dual homing on Virtual LACP on a MLT" DEFVAL { false } ::= { rcMltVlacpEntry 5 } -- rcMltBvidPortTable related information starts here rcMltBvidPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMltBvidPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table contains Bridge Vlan configured information for Primary and Secondary ports for MLT-UNI" ::= { rcMlt 14 } rcMltBvidPortEntry OBJECT-TYPE SYNTAX RcMltBvidPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry with Info about VLAN with its Primary and secondary ports for MLT-UNI" INDEX { rcMltBvidMltId, rcMltBvidVlanId} ::= { rcMltBvidPortTable 1 } RcMltBvidPortEntry ::= SEQUENCE { rcMltBvidMltId Integer32, rcMltBvidVlanId Integer32, rcMltBvidPrimaryPort InterfaceIndex, rcMltBvidSecondaryPort InterfaceIndex, rcMltBvidRowStatus RowStatus } rcMltBvidMltId OBJECT-TYPE SYNTAX Integer32 (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID of the Port List" ::= { rcMltBvidPortEntry 1 } rcMltBvidVlanId OBJECT-TYPE SYNTAX Integer32 (1..4096) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID of the Port List" ::= { rcMltBvidPortEntry 2 } rcMltBvidPrimaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Primary port of the MLT for the VLAN when load distribution option is b-vid" ::= { rcMltBvidPortEntry 3 } rcMltBvidSecondaryPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "Secondary port of the MLT for the VLAN when load distribution option is b-vid " ::= { rcMltBvidPortEntry 4 } rcMltBvidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to Add/delete entries in the table" ::= { rcMltBvidPortEntry 5 } -- rcMltBvidPortTable related information ends here rcMltNotificationObjects OBJECT IDENTIFIER ::= { rcMlt 15 } rcMltAggTrapEvent OBJECT-TYPE SYNTAX INTEGER { localdown(1), remotedown(2), up(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Three trap events type: local down(1), remote down(2), up(3)." ::= { rcMltNotificationObjects 1 } rcMltIstStpEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable/disable mlt ist stp functionality." DEFVAL { disable } ::= { rcMlt 16 } -- Link Flap Detect Group rcLinkFlapDetectAutoPortDownEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If the number exceeds a given bound the port will be forced out-of-service." ::= { rcLinkFlapDetect 1 } rcLinkFlapDetectSendTrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure whether a trap should be sent if the port is forced out-of-service." ::= { rcLinkFlapDetect 2 } rcLinkFlapDetectFrequency OBJECT-TYPE SYNTAX Integer32 (1..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the number of times the port can go down." ::= { rcLinkFlapDetect 3 } rcLinkFlapDetectInterval OBJECT-TYPE SYNTAX Integer32 (2..600) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the interval (in minutes)." ::= { rcLinkFlapDetect 4 } -- rcL2Redundancy Group rcL2RedundancyHaCpuState OBJECT-TYPE SYNTAX INTEGER { initialization(0), oneWayActive(1), twoWayActive(2), synchronized(3), remoteIncompatible(4), error(5), disabled(6), peerNotConnected(7), peerConnected(8), lostPeerConnection(9), notSynchronized(10), synchronizeInProgress(11) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the Ha-CPU state. initialization - indicate the CPU is in this state. oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (1). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). synchronized - Table based synchroniztion was completed on the current CPU (3). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (4). error - If an invalid event is generated in a given state the CPU enters Error state (5). disabled - High Availability is not enabled (6). peerNotConnected - no peer connection is established (7). peerConnected - peer connection is established (8). lostPeerConnection - lost connection to peer/Standby CPU (9). notSynchronized - Table Sync is not complete (10). synchronizeInProgress - Table Sync is in progress (11)." ::= { rcL2Redundancy 1 } rcL2RedundancyHaEvent OBJECT-TYPE SYNTAX INTEGER { restart(0), systemRegistrationDone(1), tableSynchronizationDone(2), versionIncompatible(3), noEvent(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the Ha event status. restart (0) - Causes the state machine to restart systemRegistrationDone (1)- Causes the CPU to transfer to One Way or Two Way Active state. Locally or message received from remote CPU. tableSynchronizationDone (2) - Causes the CPU to transfer to Synchronized state. versionIncompatible (3) - Causes the CPU to go to Remote Incompatible state noEvent (4) - Means no event has occured uptill now. " ::= { rcL2Redundancy 2 } rcL2RedundancyEnable OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the feature enable/disable." ::= { rcL2Redundancy 3 } rcL2RedundancyStandbyCpu OBJECT-TYPE SYNTAX INTEGER { hotStandbyCPU(1), warmStandbyCPU(2), standbyCPUNotPresent(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate if the L2 Redundancy is enabled on the standby CPU." ::= { rcL2Redundancy 4 } END