RC-MLD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI TruthValue, DisplayString FROM SNMPv2-TC Ipv6Address FROM IPV6-TC InterfaceIndex FROM IF-MIB PortSet, rcMld, EnableValue FROM RAPID-CITY; rcMldMib MODULE-IDENTITY LAST-UPDATED "201702100000Z" ORGANIZATION "Avaya" CONTACT-INFO "Prem Palarapu Postal: Avaya 600 Technology Park Billerica, MA 01821 email: prempa@avaya.com " DESCRIPTION "Enterprise MIB for the MLD mibs." REVISION "201702100000Z" -- 10 Feb 2017 DESCRIPTION "Version 4: Corrected MIB compiler errors." REVISION "201510080000Z" -- 08 October 2015 DESCRIPTION "Version 3: Commented out the following objects, because they are not supported in the first release (but will be supported in the future, and PLM want to retain the OIDs to be in sync with Ipv4) - rcMldNewGroupUserId rcMldNewGroupMemberState rcMldNewGroupSessionTime rcMldInterfaceExtnSnoopMRouterPorts rcMldInterfaceExtnSnoopActiveMRouterPorts rcMldInterfaceExtnSnoopMRouterExpiration rcMldv2CacheEntryModeExpiryTimer rcPimIpv6CandidateRPTable Changed the following objects from read-write to read-only - rcMldSsmGlobalRangeGroup rcMldSsmGlobalRangeMask Removed rcMldv2CacheEntryVersion2HostTimer as it is not needed anymore Requested by Cristea Oana, submit 25501 (prempa)" REVISION "201507220000Z" -- 22 July 2015 DESCRIPTION "Version 2: Added rcMldSerderTable. Requested by Stefan Dinescu (malok)" REVISION "201504060000Z" -- 06 Apr 2015 DESCRIPTION "Version 1: Created the file" ::= { rcMld 0 } rcMldObjects OBJECT IDENTIFIER ::= { rcMld 1 } rcMldNotification OBJECT IDENTIFIER ::= { rcMld 2 } --New MLD Group Table. rcMldNewGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMldNewGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the multicast groups configured in the device." ::= { rcMldObjects 1 } rcMldNewGroupEntry OBJECT-TYPE SYNTAX RcMldNewGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an Mld group." INDEX { rcMldNewGroupIpv6Address, rcMldNewGroupMembers, rcMldNewGroupInPort } ::= { rcMldNewGroupTable 1 } RcMldNewGroupEntry ::= SEQUENCE { rcMldNewGroupIpv6Address Ipv6Address, rcMldNewGroupMembers Ipv6Address, rcMldNewGroupInPort InterfaceIndex, rcMldNewGroupExpiration Integer32, rcMldNewGroupIfIndex InterfaceIndex -- rcMldNewGroupUserId DisplayString, -- rcMldNewGroupMemberState INTEGER, -- rcMldNewGroupSessionTime Integer32 } rcMldNewGroupIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast Group Address that others want to join to. A group address can be the same for many incoming ports." ::= { rcMldNewGroupEntry 1 } rcMldNewGroupMembers OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP Address of a source that has sent group report wishing to join this group." ::= { rcMldNewGroupEntry 2 } rcMldNewGroupInPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources." ::= { rcMldNewGroupEntry 3 } rcMldNewGroupExpiration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report." ::= { rcMldNewGroupEntry 4 } rcMldNewGroupIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources." ::= { rcMldNewGroupEntry 5 } -- rcMldNewGroupUserId OBJECT-TYPE -- SYNTAX DisplayString (SIZE(0..32)) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "User-id sending this group" -- ::= { rcMldNewGroupEntry 6 } -- rcMldNewGroupMemberState OBJECT-TYPE -- SYNTAX INTEGER { -- noState(1), -- auth(2), -- accStart(3), -- authAndAcctStart(4), -- authAndAcctDisabled(5) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Used for IGAP, to indicated member state." -- ::= { rcMldNewGroupEntry 7 } --rcMldNewGroupSessionTime OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Used for IGAP, to indicated the session time -- in seconds for the member. Session time is -- started after traffic is available to member. -- It can be also called AccountingTime since its -- values correspondes to the accounting duration of -- IGAP user session." -- ::= { rcMldNewGroupEntry 8 } -- MLD rcMldInterfaceExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMldInterfaceExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { rcMldObjects 2 } rcMldInterfaceExtnEntry OBJECT-TYPE SYNTAX RcMldInterfaceExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { rcMldInterfaceExtnIfIndex } ::= { rcMldInterfaceExtnTable 1 } --added elements corresponding to IPv4 IGMP MIB --unsupported elements are commented RcMldInterfaceExtnEntry ::= SEQUENCE { rcMldInterfaceExtnIfIndex InterfaceIndex, rcMldInterfaceExtnSnoopEnable TruthValue, -- rcMldInterfaceExtnProxySnoopEnable TruthValue, -- rcMldInterfaceExtnMaxAdvertiseInterval INTEGER, -- rcMldInterfaceExtnMinAdvertiseInterval INTEGER, -- rcMldInterfaceExtnMaxInitialAdvertiseInterval Integer32, -- rcMldInterfaceExtnMaxInitialAdvertments Integer32, -- rcMldInterfaceExtnNeighborDeadInterval Integer32, -- rcMldInterfaceExtnFastLeaveEnable TruthValue, -- rcMldInterfaceExtnFastLeavePortMembers PortSet, -- rcMldInterfaceExtnMrdiscEnable TruthValue, -- rcMldInterfaceExtnDiscoveredRouterPorts PortSet, -- rcMldInterfaceExtnSnoopMRouterPorts PortSet, -- rcMldInterfaceExtnSnoopActiveMRouterPorts PortSet, -- rcMldInterfaceExtnSnoopMRouterExpiration Integer32, rcMldInterfaceExtnFlushAction INTEGER, -- rcMldInterfaceExtnRouterAlertEnable EnableValue, rcMldInterfaceExtnSsmEnable TruthValue, -- rcMldInterfaceExtnIgapEnable EnableValue, -- rcMldInterfaceExtnAccntEnable EnableValue, -- rcMldInterfaceExtnAuthEnable EnableValue, -- rcMldInterfaceExtnStreamLimitEnable EnableValue, -- rcMldInterfaceExtnMaxStreams Integer32, -- rcMldInterfaceExtnNumStreams Integer32, rcMldInterfaceExtnNewQuerier Ipv6Address, -- rcMldInterfaceExtnSnoopQuerierEnable TruthValue, -- rcMldInterfaceExtnSnoopQuerierAddr Ipv6Address, -- rcMldInterfaceExtnMvrEnable TruthValue, -- rcMldInterfaceExtnMvrProxyEnable TruthValue, rcMldInterfaceExtnDynamicDowngradeEnable TruthValue, -- rcMldInterfaceExtnCompatibilityModeEnable TruthValue, rcMldInterfaceExtnOperVersion INTEGER, -- rcMldInterfaceExtnExplicitHostTrackingEnable TruthValue, rcMldInterfaceExtnMcastMode INTEGER } rcMldInterfaceExtnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN)" ::= { rcMldInterfaceExtnEntry 1 } rcMldInterfaceExtnSnoopEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable snoop on interface" ::= { rcMldInterfaceExtnEntry 2 } -- rcMldInterfaceExtnProxySnoopEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable proxy snoop." -- ::= { rcMldInterfaceExtnEntry 3 } --rcMldInterfaceExtnMaxAdvertiseInterval OBJECT-TYPE -- SYNTAX INTEGER(2..180) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "" -- DEFVAL { 20 } -- ::= { rcMldInterfaceExtnEntry 4 } -- rcMldInterfaceExtnMinAdvertiseInterval OBJECT-TYPE -- SYNTAX INTEGER(3..180) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "" -- DEFVAL { 15 } -- ::= { rcMldInterfaceExtnEntry 5 } -- rcMldInterfaceExtnMaxInitialAdvertiseInterval OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "" -- DEFVAL { 2 } -- ::= { rcMldInterfaceExtnEntry 6 } -- rcMldInterfaceExtnMaxInitialAdvertments OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "" -- DEFVAL { 3 } -- ::= { rcMldInterfaceExtnEntry 7 } -- rcMldInterfaceExtnNeighborDeadInterval OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "" -- DEFVAL { 60 } -- ::= { rcMldInterfaceExtnEntry 8 } --rcMldInterfaceExtnFastLeaveEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Enable fast leave on this interface." -- DEFVAL { false } -- ::= { rcMldInterfaceExtnEntry 9 } --rcMldInterfaceExtnFastLeavePortMembers OBJECT-TYPE -- SYNTAX PortSet -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "The set of ports that are enabled for fast leave." -- ::= { rcMldInterfaceExtnEntry 10 } --rcMldInterfaceExtnMrdiscEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Enable/disable multicast router discovery." -- ::= { rcMldInterfaceExtnEntry 11 } --rcMldInterfaceExtnDiscoveredRouterPorts OBJECT-TYPE -- SYNTAX PortSet -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "list of ports that discovered by -- MLD Multicast router discovery -- (MRDISC) protocol." -- ::= { rcMldInterfaceExtnEntry 12 } -- rcMldInterfaceExtnSnoopMRouterPorts OBJECT-TYPE -- SYNTAX PortSet -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "The set of ports in this interface that provide -- connectivity to the IPv6 Multicast router." -- ::= { rcMldInterfaceExtnEntry 13 } -- rcMldInterfaceExtnSnoopActiveMRouterPorts OBJECT-TYPE -- SYNTAX PortSet -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Active ports." -- ::= { rcMldInterfaceExtnEntry 14 } -- rcMldInterfaceExtnSnoopMRouterExpiration OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Multicast querier router aging time out." -- ::= { rcMldInterfaceExtnEntry 15 } rcMldInterfaceExtnFlushAction OBJECT-TYPE SYNTAX INTEGER { none(1), flushGrpMember(2), flushMrouter(3), flushSender(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "MLD flush action" ::= { rcMldInterfaceExtnEntry 16 } --rcMldInterfaceExtnRouterAlertEnable OBJECT-TYPE -- SYNTAX EnableValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Enable Router Alert Check." -- ::= { rcMldInterfaceExtnEntry 17 } rcMldInterfaceExtnSsmEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable SSM." ::= { rcMldInterfaceExtnEntry 18 } --rcMldInterfaceExtnIgapEnable OBJECT-TYPE -- SYNTAX EnableValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable/disable IGAP." -- DEFVAL { enable } -- ::= { rcMldInterfaceExtnEntry 19 } --rcMldInterfaceExtnAccntEnable OBJECT-TYPE -- SYNTAX EnableValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable/disable accounting." -- DEFVAL { enable } -- ::= { rcMldInterfaceExtnEntry 20 } --rcMldInterfaceExtnAuthEnable OBJECT-TYPE -- SYNTAX EnableValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable/disable authentication." -- DEFVAL { enable } -- ::= { rcMldInterfaceExtnEntry 21 } --rcMldInterfaceExtnStreamLimitEnable OBJECT-TYPE -- SYNTAX EnableValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Stream Limitation enable/disable." -- DEFVAL { enable } -- ::= { rcMldInterfaceExtnEntry 22 } --rcMldInterfaceExtnMaxStreams OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Maximum number of stream." -- DEFVAL { 4 } -- ::= { rcMldInterfaceExtnEntry 23 } -- rcMldInterfaceExtnNumStreams OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "Current number of streams." -- ::= { rcMldInterfaceExtnEntry 24 } rcMldInterfaceExtnNewQuerier OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the new MLD querier." ::= { rcMldInterfaceExtnEntry 25 } --rcMldInterfaceExtnSnoopQuerierEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable snoop querier." -- ::= { rcMldInterfaceExtnEntry 26 } --rcMldInterfaceExtnSnoopQuerierAddr OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "The pseudo address of the MLD Snoop Querier." -- ::= { rcMldInterfaceExtnEntry 27 } --rcMldInterfaceExtnMvrEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Enable or disable mcast-vlan-registration on a vlan, it -- is used to specified a vlan works as a mcast-vlan, -- maximum 16 mcast-vlan is supported." -- ::= { rcMldInterfaceExtnEntry 28 } --rcMldInterfaceExtnMvrProxyEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable or disable mcast-vlan-registration proxy on a vlan, -- you must enable mcast-vlan-registration at first." -- ::= { rcMldInterfaceExtnEntry 29 } rcMldInterfaceExtnDynamicDowngradeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "enable dynamic downgrade the MLD version when older version query message was received." DEFVAL { true } ::= { rcMldInterfaceExtnEntry 30 } --rcMldInterfaceExtnCompatibilityModeEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "enable v1 v2 compatible mode, which will handle -- the MLD v1 message in v2 interface" -- DEFVAL { false } -- ::= { rcMldInterfaceExtnEntry 31 } rcMldInterfaceExtnOperVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version2(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational version of MLD which is running on this interface." ::= { rcMldInterfaceExtnEntry 32 } --rcMldInterfaceExtnExplicitHostTrackingEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Enable the Mld protocol running in version 2 to -- track hosts per channels/groups." -- DEFVAL { false } -- ::= { rcMldInterfaceExtnEntry 33 } rcMldInterfaceExtnMcastMode OBJECT-TYPE SYNTAX INTEGER { snoop(1), pim(2), snoopSpb(3), routerSpb(4), dvmrp(5), none(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "MLD interface mode." ::= { rcMldInterfaceExtnEntry 34 } -- MLD SSM rcMldSsmGlobal OBJECT IDENTIFIER ::= { rcMldObjects 3 } rcMldSsmGlobalRangeGroup OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "If multicast group address & RangeMask == RangeGroup, then RangeGroup is in Ssm Range. Else it is not in the range." ::= { rcMldSsmGlobal 1 } rcMldSsmGlobalRangeMask OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-only STATUS current DESCRIPTION "Used with RangeGroup." ::= { rcMldSsmGlobal 2 } -- rcMldSnoopTrace rcMldSnoopTraceTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMldSnoopTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table listing the multicast groups traversing the snoop enabled router" ::= { rcMldObjects 4 } rcMldSnoopTraceEntry OBJECT-TYPE SYNTAX RcMldSnoopTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry listing the multicast groups traversing the snoop enabled router" INDEX { rcMldSnoopGrpAddr, rcMldSnoopSrcAddr, rcMldSnoopOutVlan } ::= { rcMldSnoopTraceTable 1 } RcMldSnoopTraceEntry ::= SEQUENCE { rcMldSnoopGrpAddr Ipv6Address, rcMldSnoopSrcAddr Ipv6Address, rcMldSnoopOutVlan InterfaceIndex, rcMldSnoopInPort InterfaceIndex, rcMldSnoopInVlan InterfaceIndex, rcMldSnoopOutPort PortSet, rcMldSnoopType INTEGER } rcMldSnoopGrpAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip multicast address of group traversing the router" ::= { rcMldSnoopTraceEntry 1 } rcMldSnoopSrcAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ip source address of the multicast group address" ::= { rcMldSnoopTraceEntry 2 } rcMldSnoopOutVlan OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress vlan id for the multicast group" ::= { rcMldSnoopTraceEntry 3 } rcMldSnoopInPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress port for the multicast group" ::= { rcMldSnoopTraceEntry 4 } rcMldSnoopInVlan OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress vlan id for the multicast source" ::= { rcMldSnoopTraceEntry 5 } rcMldSnoopOutPort OBJECT-TYPE SYNTAX PortSet MAX-ACCESS read-only STATUS current DESCRIPTION "Egress port of the multicast group" ::= { rcMldSnoopTraceEntry 6 } rcMldSnoopType OBJECT-TYPE SYNTAX INTEGER { network(1), access(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port type on which the snoop entry is learnt" ::= { rcMldSnoopTraceEntry 7} --The MLDv2 Router Cache Table rcMldv2CacheTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMldv2CacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the MLDv2 specific data corresponding to each interface, port and multicast group pair on a Router." ::= { rcMldObjects 5 } rcMldv2CacheEntry OBJECT-TYPE SYNTAX RcMldv2CacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an Mldv2 Group." INDEX { rcMldv2CacheEntryGroupAddress, rcMldv2CacheEntryIfIndex, rcMldv2CacheEntryInPort } ::= { rcMldv2CacheTable 1 } RcMldv2CacheEntry ::= SEQUENCE { rcMldv2CacheEntryGroupAddress Ipv6Address, rcMldv2CacheEntryIfIndex InterfaceIndex, rcMldv2CacheEntryInPort InterfaceIndex, -- rcMldv2CacheEntryModeExpiryTimer Integer32, rcMldv2CacheEntryVersion1HostTimer Integer32, rcMldv2CacheEntrySourceFilterMode INTEGER } rcMldv2CacheEntryGroupAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multicast group Address that others want to join. A group address can be the same for many incoming ports." ::= { rcMldv2CacheEntry 1 } rcMldv2CacheEntryIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources." ::= { rcMldv2CacheEntry 2 } rcMldv2CacheEntryInPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources." ::= { rcMldv2CacheEntry 3 } -- rcMldv2CacheEntryModeExpiryTimer OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "This value is applicable only to MLDv2-compatible nodes -- and represents the time remaining before the interface -- EXCLUDE state expires and the interface state transitions -- to INCLUDE mode. This value can never be greater than -- rcMldNewGroupExpiration." -- ::= { rcMldv2CacheEntry 4 } rcMldv2CacheEntryVersion1HostTimer OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining until the local router will assume that there are no longer any MLD version 1 members on the IP subnet attached to this interface. This entry only applies to MLDv1 hosts. Upon hearing any MLDv1 Report, this value is reset to the group membership timer. While this time remaining is non-zero, the local router ignores any MLDv2 Leave messages for this group that it receives on this interface." ::= { rcMldv2CacheEntry 5 } rcMldv2CacheEntrySourceFilterMode OBJECT-TYPE SYNTAX INTEGER { include (1), exclude (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current group state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE." ::= { rcMldv2CacheEntry 6 } --The MLDv2 Router Source list Table -- -- This information helps to interpret the content of the rcMldRouterSrcListTable. -- 1. rcMldRouterSrcListHostAddress is not zero; rcMldRouterSrcListMemberAddress is zero. -- This is the case when we have a source in the include list and no receiver asked it -- explicitly (conflict source). -- Ex: Two receivers present; one receiver is in EXLCUDE{S1} and the other one is in -- EXLCUDE{S2}. The group state is EXCLUDE("S2","NULL"). -- 2. rcMldRouterSrcListHostAddress is not zero, rcMldRouterSrcListMemberAddress is not zero. -- This is the case when a receiver asked to receive traffic for a specific source. -- Ex: One receiver present in INCLUDE{S1} -- 3. rcMldRouterSrcListHostAddress is not zero, rcMldRouterSrcListMemberAddress is zero. -- This represent a source that needs to be blocked. -- 4. rcMldRouterSrcListHostAddres is zero rcMldRouterSrcListMemberAddress is not zero. -- The source zero is used to track the members that are in exclude mode -- Ex: One receiver R1 in EXCLUDE(S1). Two entries are present in this table. -- 4.1. rcMldRouterSrcListHostAddres = S1, rcMldRouterSrcListMemberAddress = 0 - blocked source. -- 4.2. rcMldRouterSrcListHostAddres = 0, rcMldRouterSrcListMemberAddress = R1 - tracked member in exlcude mode. -- -- If the explicit host tracking is not enabled the only the last reporter for a specific source or group -- will be present in this table. -- rcMldRouterSrcListTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMldRouterSrcListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a Router." ::= { rcMldObjects 6 } rcMldRouterSrcListEntry OBJECT-TYPE SYNTAX RcMldRouterSrcListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an Mld Source." INDEX { rcMldRouterSrcListGroupAddress, rcMldRouterSrcListIfIndex, rcMldRouterSrcListInPort, rcMldRouterSrcListHostAddress, rcMldRouterSrcListMemberAddress } ::= { rcMldRouterSrcListTable 1 } RcMldRouterSrcListEntry ::= SEQUENCE { rcMldRouterSrcListGroupAddress Ipv6Address, rcMldRouterSrcListIfIndex InterfaceIndex, rcMldRouterSrcListInPort InterfaceIndex, rcMldRouterSrcListHostAddress Ipv6Address, rcMldRouterSrcListMemberAddress Ipv6Address, rcMldRouterSrcListExpire Integer32, rcMldRouterSrcListMode INTEGER, rcMldRouterSrcListMemberExpire Integer32 } rcMldRouterSrcListGroupAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 multicast group address for which this entry contains information." ::= { rcMldRouterSrcListEntry 1 } rcMldRouterSrcListIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface for which this entry contains information for an IP multicast group address." ::= { rcMldRouterSrcListEntry 2 } rcMldRouterSrcListInPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source." ::= { rcMldRouterSrcListEntry 3 } rcMldRouterSrcListHostAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "The host address to which this entry corresponds." ::= { rcMldRouterSrcListEntry 4 } rcMldRouterSrcListMemberAddress OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 Address of a member that has sent source specific report wishing to join this source." ::= { rcMldRouterSrcListEntry 5 } rcMldRouterSrcListExpire OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to be an EXCLUDE state value." ::= { rcMldRouterSrcListEntry 6 } rcMldRouterSrcListMode OBJECT-TYPE SYNTAX INTEGER { include (1), exclude (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current member state, applicable to MLDv2-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE." ::= { rcMldRouterSrcListEntry 7 } rcMldRouterSrcListMemberExpire OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the time until the member for this source will expire" ::= { rcMldRouterSrcListEntry 8 } -- MLD Globals rcMldGlobalGroup OBJECT IDENTIFIER ::= { rcMld 3 } rcMldGenerateTrap OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling the MLD to generate trap." DEFVAL { disable } ::= { rcMldGlobalGroup 1 } rcMldGenerateLog OBJECT-TYPE SYNTAX EnableValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling the MLD to generate log." DEFVAL { disable } ::= { rcMldGlobalGroup 2 } -- Elements used in traps rcMldNotificationInterfaceIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The internetwork-layer interface value of the interface for which MLD is enabled." ::= { rcMldNotification 1 } rcMldNotificationNewGroupIpv6Address OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Multicast Group Address that others want to join to. A group address can be the same for many incoming ports." ::= { rcMldNotification 2 } rcMldNotificationNewGroupMembers OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP Address of a source that has sent group report wishing to join this group." ::= { rcMldNotification 3 } rcMldNotificationNewGroupInPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources." ::= { rcMldNotification 4 } -- MLD sender table rcMldSenderTable OBJECT-TYPE SYNTAX SEQUENCE OF RcMldSenderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table listing the multicast senders." ::= { rcMldObjects 7 } rcMldSenderEntry OBJECT-TYPE SYNTAX RcMldSenderEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) representing an MLD senser." INDEX { rcMldSenderGrpAddr, rcMldSenderIfIndex, rcMldSenderMemberAddr } ::= { rcMldSenderTable 1 } RcMldSenderEntry ::= SEQUENCE { rcMldSenderGrpAddr Ipv6Address, rcMldSenderIfIndex InterfaceIndex, rcMldSenderMemberAddr Ipv6Address, rcMldSenderAction INTEGER, rcMldSenderPort InterfaceIndex } rcMldSenderGrpAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPv6 multicast group address." ::= { rcMldSenderEntry 1 } rcMldSenderIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface index of the sender." ::= { rcMldSenderEntry 2 } rcMldSenderMemberAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ipv6 Host Address." ::= { rcMldSenderEntry 3 } rcMldSenderAction OBJECT-TYPE SYNTAX INTEGER { none(1), flushEntry(2), flushGrp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "none(1), flushEntry(2), flushGrp(3)." ::= { rcMldSenderEntry 4 } rcMldSenderPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Mld Sender port." ::= { rcMldSenderEntry 5 } -- Table rcIpv6MulticastTimedPruneTable and rcIpv6MulticastSoftwareForwarding are not supported -- in first release but are defined as placeholders --rcIpv6MulticastTimedPruneTable OBJECT-TYPE -- SYNTAX SEQUENCE OF RcIpv6MulticastTimedPruneEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "This feature provides the ability for the user to -- create (S,G) Forwarding Entries that would not be -- pruned until a configurable timer expires. Currently -- the timer value is set to 0." -- ::= { rcIp XXX } -- --rcIpv6MulticastTimedPruneEntry OBJECT-TYPE -- SYNTAX RcIpv6MulticastTimedPruneEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "An entry of IPv6 Multicast Timed Prune Table." -- INDEX { rcIpv6MulticastTimedPruneGroupAddress, -- rcIpv6MulticastTimedPruneSourceAddress, -- rcIpv6MulticastTimedPruneSrcSubnetMask } -- ::= { rcIpv6MulticastTimedPruneTable 1 } -- --RcIpv6MulticastTimedPruneEntry ::= -- SEQUENCE { -- rcIpv6MulticastTimedPruneGroupAddress Ipv6Address, -- rcIpv6MulticastTimedPruneSourceAddress Ipv6Address, -- rcIpv6MulticastTimedPruneSrcSubnetMask Ipv6Address, -- rcIpv6MulticastTimedPruneAgingTimer Integer32, -- rcIpv6MulticastTimedPruneTimeLeft Integer32, -- rcIpv6MulticastTimedPruneLastActivity TimeTicks, -- rcIpv6MulticastTimedPruneRowStatus RowStatus -- } -- --rcIpv6MulticastTimedPruneGroupAddress OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "This field indicates the IPv6 Multicast Group -- Address associated with the IPv6 multicast stream." -- ::= { rcIpv6MulticastTimedPruneEntry 1 } -- --rcIpv6MulticastTimedPruneSourceAddress OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "This is the Source Subnet IPv6 address of the -- sender of the IPv6 multicast stream." -- ::= { rcIpv6MulticastTimedPruneEntry 2 } -- --rcIpv6MulticastTimedPruneSrcSubnetMask OBJECT-TYPE -- SYNTAX Ipv6Address -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "This is the Source Subnet Mask IPv6 address of -- the sender of the IPv6 multicast stream." -- ::= { rcIpv6MulticastTimedPruneEntry 3 } -- --rcIpv6MulticastTimedPruneAgingTimer OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "This field represents the amount of time -- (in minutes) this timed prune entry will be -- kept in the forwarding table when there are no -- more receivers. After this timer expires, this -- timed prune entry would be treated as a normal -- DVMRP/PIM forwarding entry. Aging Timer value of -- 0 (infinite time) indicates this timed prune entry -- will not be deleted even when there are no -- more receivers." -- DEFVAL { 5 } -- ::= { rcIpv6MulticastTimedPruneEntry 4 } -- --rcIpv6MulticastTimedPruneTimeLeft OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "This read-only field represents the remaining time -- for which this timed prune entry will be kept in -- the forwarding table. After this timer expires, -- this timed prune entry would be treated as a normal -- DVMRP/PIM forwarding entry. 0 in this field indicates -- that this entry would not be aged out." -- ::= { rcIpv6MulticastTimedPruneEntry 5 } -- --rcIpv6MulticastTimedPruneLastActivity OBJECT-TYPE -- SYNTAX TimeTicks -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION "This read-only field represents the actual time since -- the traffic has come from this Source, Group pair." -- ::= { rcIpv6MulticastTimedPruneEntry 6 } -- --rcIpv6MulticastTimedPruneRowStatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "row status" -- ::= { rcIpv6MulticastTimedPruneEntry 7 } -- -- -- --rcIpv6MulticastSoftwareForwarding OBJECT IDENTIFIER ::= { rcIp 113 } -- --rcIpv6MulticastSoftwareForwardingEnable OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Enable/Disable multicast software forwarding." -- DEFVAL { false } -- ::= { rcIpv6MulticastSoftwareForwarding 1 } -- --rcIpv6MulticastSoftwareForwardingThreshold OBJECT-TYPE -- SYNTAX Integer32(1..65535) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Threshold to switch from software forwarding to -- hardware forwarding. Unit = pkt per second" -- DEFVAL { 5 } -- ::= { rcIpv6MulticastSoftwareForwarding 2 } END