RC-IP-ROUTING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Unsigned32 FROM SNMPv2-SMI TruthValue, RowStatus, DisplayString FROM SNMPv2-TC InterfaceIndex FROM IF-MIB rcIpRouting, rcIpStaticRoute, rcIpInterVrfStaticRoute FROM RC-IP-MIB rcIp FROM RAPID-CITY VrfIdentifier FROM RC-VRF-MIB; rcIpRoutingMib MODULE-IDENTITY LAST-UPDATED "202003120000Z" ORGANIZATION "Bay Networks, Rapid-City Group" CONTACT-INFO " Edwin Tsang Postal: Bay Networks, Inc. 4401 Great America Parkway Santa Clara, CA 95052-8185 Tel: 408-495-6159 Fax: 408-495-5215 E-mail: edwin_tsang@baynetworks.com " DESCRIPTION "Enterprise MIB for the Accelar product family." REVISION "202003120000Z" -- 12 March 2020 DESCRIPTION "Version 24: Add rcIpInterVrfStaticRouteName Requested by Deborah Fitzgerald (Prem)." REVISION "201908070000Z" -- 07 August 2019 DESCRIPTION "Version 23: Add rcIpStaticRouteBfdVrfId and rcIpStaticRouteBfdVrfName under rcIpStaticRouteBfdTable (Prem)." REVISION "201405070000Z" -- 07 May 2014 DESCRIPTION "Version 22: Added rcIpSourceInterfaceTable." REVISION "201404040000Z" -- 04 April 2014 DESCRIPTION "Version 21: Change the rcIpRouteNextHopId size to 255" REVISION "201403180000Z" -- 18 March 2014 DESCRIPTION "Version 20: Added mib objects - rcIpRouteLayer3VirtualInterfaceType and rcIpRouteLayer3VirtualInterface." REVISION "201310100000Z" -- 10 October 2013 DESCRIPTION "Version 19: Corrected syntax definitions." REVISION "201101060000Z" -- 06 January 2011 DESCRIPTION "Version 18: Added mib object rcIpRouteNextHopId. Added enum values iBEVN(75), iAS(128), iASE(129), iBS(130), iBSE(131), iBSN(138), iBSEN(139), iASV(192), iASVE(193), iBSV(194) and iBSVE(195) for rcIpRoutePathType" REVISION "200906050000Z" -- 05 June 2009 DESCRIPTION "Version 17: Added objects to control routing table size." REVISION "200805160000Z" -- 16 May 2008 DESCRIPTION "Version 16: Added enum values to rcIpRouteProto." REVISION "200805090000Z" -- 09 May 2008 DESCRIPTION "Version 15: Fixed smilint errors." REVISION "200803280000Z" -- 28 March 2008 DESCRIPTION "Version 14: Removed rcIpStaticRouteBfdEnable; Added rcIpStaticRouteBfdTableSize and rcIpStaticRouteBfdTable." REVISION "200803170000Z" -- 17 March 2008 DESCRIPTION "Version 13: Added enumerated values to rcIpRoutePathType." REVISION "200803050000Z" -- 05 March 2008 DESCRIPTION "Version 12: Changed module name to 'RC-VRF-MIB' from 'RC-VIRTUAL-ROUTING-MIB'" REVISION "200801100000Z" -- 10 Jan 2008 DESCRIPTION "Version 11: Added rcIpStaticRouteBfdEnable in RcIpStaticRouteEntry." REVISION "200710150000Z" -- 15 Oct 2007 DESCRIPTION "Version 10: Added enum vrf (15) to rcIpRouteProto." REVISION "200709190000Z" -- 19 Sep 2007 DESCRIPTION "Version 9: Added enums to rcIpRoutePathType." REVISION "200705260000Z" -- 26 May 2007 DESCRIPTION "Version 8: Added rcIpInterVrfStaticRouteTable. Removed rcIpStaticRouteNextHopVrfId." REVISION "200702200000Z" -- 20 Feb 2007 DESCRIPTION "Version 7: Fixed a MIB compilation error" REVISION "200701310000Z" -- 31 Jan 2007 DESCRIPTION "Version 6: Added object to rcIpRouteTable and rcIpStaticRouteTable" REVISION "200502160000Z" -- 16 Feb 2005 DESCRIPTION "Version 5: changed range for rcIpStaticRouteIfIndex" REVISION "200409300000Z" -- 30 Sept 2004 DESCRIPTION "Version 4: add range for rcIpRouteAltSequence" REVISION "200409210000Z" -- 21 Sept 2004 DESCRIPTION "Version 3: remove range for rcIpRouteAltSequence" REVISION "200407200000Z" -- 20 July 2004 DESCRIPTION "Version 3: Added version info" ::= { rcIpRouting 0 } -- Routing group -- rcIpRouting/rcIpRoutingRedistributeRipToOspf Group rcIpRoutingRedistributeRipToOspf OBJECT IDENTIFIER ::= {rcIpRouting 1} rcIpRoutingRedistributeRipToOspfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to Redistribute RIP routes to OSPF." DEFVAL { false } ::= { rcIpRoutingRedistributeRipToOspf 1 } rcIpRoutingRedistributeRipToOspfExplicitMetric OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the RIP route to OSPF." DEFVAL { 1 } ::= { rcIpRoutingRedistributeRipToOspf 2 } rcIpRoutingRedistributeRipToOspfUseExplicitMetric OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing RIP routes to OSPF." DEFVAL { false } ::= { rcIpRoutingRedistributeRipToOspf 3 } rcIpRoutingRedistributeRipToOspfExternalMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), -- extenal metric type1 type2(2) -- extenal metric type2 } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost)." DEFVAL { type2 } ::= { rcIpRoutingRedistributeRipToOspf 4 } -- rcIpRouting/rcIpRoutingRedistributeOspfToRip Group rcIpRoutingRedistributeOspfToRip OBJECT IDENTIFIER ::= {rcIpRouting 2} rcIpRoutingRedistributeOspfToRipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to redistribute OSPF routes to RIP." DEFVAL { false } ::= { rcIpRoutingRedistributeOspfToRip 1 } rcIpRoutingRedistributeOspfToRipExplicitMetric OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the OSPF route to RIP." DEFVAL { 1 } ::= { rcIpRoutingRedistributeOspfToRip 2 } rcIpRoutingRedistributeOspfToRipUseExplicitMetric OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing OSPF routes to RIP." DEFVAL { true } ::= { rcIpRoutingRedistributeOspfToRip 3 } -- rcIpRouting/rcIpRoutingRedistributeDirectToOspf Group rcIpRoutingRedistributeDirectToOspf OBJECT IDENTIFIER ::= {rcIpRouting 3} rcIpRoutingRedistributeDirectToOspfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether directly connected networks through non-ospf interfaces are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA." DEFVAL { false } ::= { rcIpRoutingRedistributeDirectToOspf 1 } rcIpRoutingRedistributeDirectToOspfMethod OBJECT-TYPE SYNTAX INTEGER { usePortSpeed(1), useExplicitMetric(2) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing direct routes to OSPF." DEFVAL { usePortSpeed } ::= { rcIpRoutingRedistributeDirectToOspf 2 } rcIpRoutingRedistributeDirectToOspfExplicitMetric OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the routes to directly connected networks to OSPF." DEFVAL { 1 } ::= { rcIpRoutingRedistributeDirectToOspf 3 } rcIpRoutingRedistributeDirectToOspfExternalMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), -- extenal metric type1 type2(2) -- extenal metric type2 } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost)." DEFVAL { type1 } ::= { rcIpRoutingRedistributeDirectToOspf 4 } -- rcIpRouting/rcIpRoutingRedistributeStaticToOspf Group rcIpRoutingRedistributeStaticToOspf OBJECT IDENTIFIER ::= {rcIpRouting 4} rcIpRoutingRedistributeStaticToOspfEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether static routes (that are configured locally through management protocol) are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToOspf 1 } rcIpRoutingRedistributeStaticToOspfExplicitMetric OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Value of metric that is used to translate the static routes to OSPF." DEFVAL { 10 } ::= { rcIpRoutingRedistributeStaticToOspf 2 } rcIpRoutingRedistributeStaticToOspfUseExplicitMetric OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether or not to use the user specified default metric for redistributing static routes to OSPF." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToOspf 3 } rcIpRoutingRedistributeStaticToOspfExternalMetricType OBJECT-TYPE SYNTAX INTEGER { type1(1), -- extenal metric type1 type2(2) -- extenal metric type2 } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost)." DEFVAL { type2 } ::= { rcIpRoutingRedistributeStaticToOspf 4 } rcIpRoutingRedistributeStaticToOspfAdvertDefRte OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether default route (that are configured locally through management protocol) should be distributed to OSPF database or not. If set to true then the default route will be added as external route to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToOspf 5 } -- rcIpRouting/rcIpRoutingRedistributeDirectToRip Group rcIpRoutingRedistributeDirectToRip OBJECT IDENTIFIER ::= {rcIpRouting 5} rcIpRoutingRedistributeDirectToRipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether directly connected networks through non-rip interfaces are distributed to RIP or not." DEFVAL { false } ::= { rcIpRoutingRedistributeDirectToRip 1 } -- rcIpRouting/rcIpRoutingRedistributeStaticToRip Group rcIpRoutingRedistributeStaticToRip OBJECT IDENTIFIER ::= {rcIpRouting 6} rcIpRoutingRedistributeStaticToRipEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "Used to indicate whether static routes (that are configured locally through management protocol) are distributed to RIP database or not. If set to true all the static routes will be added as external routes to RIP routing domain." DEFVAL { false } ::= { rcIpRoutingRedistributeStaticToRip 1 } -- IP Route Table rcIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP Routing table." ::= { rcIp 7 } rcIpRouteEntry OBJECT-TYPE SYNTAX RcIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A route to a particular destination." INDEX { rcIpRouteDest, rcIpRouteMask, rcIpRouteNextHop, rcIpRouteAltSequence } ::= { rcIpRouteTable 1 } RcIpRouteEntry ::= SEQUENCE { rcIpRouteDest IpAddress, rcIpRouteMask IpAddress, rcIpRouteNextHop IpAddress, rcIpRouteMetric Integer32, rcIpRouteIfIndex InterfaceIndex, rcIpRouteType INTEGER, rcIpRouteProto INTEGER, rcIpRouteAge Integer32, rcIpRouteRowStatus RowStatus, rcIpRoutePref Integer32, rcIpRouteAltSequence Integer32, rcIpRoutePathType INTEGER, rcIpRouteSrcVrfId VrfIdentifier, rcIpRouteNextHopId DisplayString, rcIpRouteLayer3VirtualInterfaceType INTEGER, rcIpRouteLayer3VirtualInterface Integer32 } rcIpRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { rcIpRouteEntry 1 } rcIpRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { rcIpRouteEntry 2 } rcIpRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface)." ::= { rcIpRouteEntry 3 } rcIpRouteMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1." ::= { rcIpRouteEntry 4 } rcIpRouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpRouteEntry 5 } rcIpRouteType OBJECT-TYPE SYNTAX INTEGER { other(1), direct(3), indirect(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route." ::= { rcIpRouteEntry 6 } rcIpRouteProto OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following -- non-protocol information, -- e.g., manually configured local(2), -- entries -- set via a network netmgmt(3), -- management protocol -- obtained via ICMP, icmp(4), -- e.g., Redirect -- the remaining values are -- all gateway routing -- protocols egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14), vOspf(15), -- indicates inter-vrf routes added by OSPF vBgp(16), -- indicates inter-vrf routes added by BGP vRip(17) -- indicates inter-vrf routes added by RIP } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols." ::= { rcIpRouteEntry 7 } rcIpRouteAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { rcIpRouteEntry 8 } rcIpRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries" ::= { rcIpRouteEntry 9 } rcIpRoutePref OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { rcIpRouteEntry 10 } rcIpRouteAltSequence OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Alternative Route Sequence. 0 denotes Best Route." ::= { rcIpRouteEntry 11 } rcIpRoutePathType OBJECT-TYPE SYNTAX INTEGER { iA(0), -- Indirect Alternative Route w/o ECMP path iAE(1), -- Indirect Alternative ECMP path iB(2), -- Indirect Best Route w/o ECMP path iBE(3), -- Indirect Best ECMP path dB(6), -- Direct Best Route iAN(8), -- Indirect Alternative route not in HW iAEN(9), -- Indirect Alternative ECMP route not in HW iBN(10), -- Indirect Best route not in HW iBEN(11), -- Indirect Best ECMP route not in HW dBN(14), -- Direct Best route not in HW iAU(16), -- Indirect Alternative Route Unresolved iAEU(17), -- Indirect Alternative ECMP Unresolved iBU(18), -- Indirect Best Route Unresolved iBEU(19), -- Indirect Best ECMP Unresolved dBU(22), -- Direct Best Route Unresolved iBF(34), -- Indirect Best route replaced by FTN iBEF(35), -- Indirect Best ECMP route replaced by FTN iBV(66), -- Indirect best IPVPN route iBEV(67), -- Indirect best ECMP IPVPN route iBVN(74), -- Indirect best IPVPN route not in HW iBEVN(75), -- Indirect best ECMP IPVPN route not in HW iAS(128), -- Indirect alternate route type iASE(129), -- Indirect alternate ECMP route type iBS(130), -- Indirect Best SPBm Route iBSE(131), -- Indirect Best SPBm Ecmp route iBSN(138), -- SPBm will define this later iBSEN(139), -- SPBm will define this later iASV(192), -- Indirect alternate VPN route type iASVE(193), -- Indirect alternate ECMP route type iBSV(194), -- Indirect Best VPN Route over SPBm network iBSVE(195) -- Indirect Best VPN ECMP Route over SPBm network } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of route. It is a combination of direct, indirect, best, alternative and ECMP path." ::= { rcIpRouteEntry 12 } rcIpRouteSrcVrfId OBJECT-TYPE SYNTAX VrfIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "srcVrfId of next-hop address" ::= { rcIpRouteEntry 13 } rcIpRouteNextHopId OBJECT-TYPE SYNTAX DisplayString (SIZE (255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of the next-hop, hostname or mac adress." ::= { rcIpRouteEntry 14 } rcIpRouteLayer3VirtualInterfaceType OBJECT-TYPE SYNTAX INTEGER { none(1), -- not applicable for route spb(2) -- uses I-SID for rcIpRouteLayer3VirtualInterface } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies type for value specified in the rcIpRouteLayer3VirtualInterface field." ::= { rcIpRouteEntry 15 } rcIpRouteLayer3VirtualInterface OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of the Layer3 Virtual Interface. When the value is an SPB I-SID, 0 denotes GlobalRouter and -1 denotes not applicable to route." ::= { rcIpRouteEntry 16 } --IP Static Route rcIpStaticRouteTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "size of Ip Static Route Table." ::= { rcIpStaticRoute 1 } rcIpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is actively using the route to forward IP traffic." ::= { rcIpStaticRoute 2 } rcIpStaticRouteEntry OBJECT-TYPE SYNTAX RcIpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A static route to a particular destination." INDEX { rcIpStaticRouteDest, rcIpStaticRouteMask, rcIpStaticRouteNextHop } ::= { rcIpStaticRouteTable 1 } RcIpStaticRouteEntry ::= SEQUENCE { rcIpStaticRouteDest IpAddress, rcIpStaticRouteMask IpAddress, rcIpStaticRouteNextHop IpAddress, rcIpStaticRouteMetric Integer32, rcIpStaticRouteIfIndex Integer32, rcIpStaticRoutePreference Integer32, rcIpStaticRouteEnable TruthValue, rcIpStaticRouteStatus INTEGER, rcIpStaticRouteRowStatus RowStatus, rcIpStaticRouteLocalNextHop TruthValue } rcIpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { rcIpStaticRouteEntry 1 } rcIpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { rcIpStaticRouteEntry 2 } rcIpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface)." ::= { rcIpStaticRouteEntry 3 } rcIpStaticRouteMetric OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { 1 } ::= { rcIpStaticRouteEntry 4 } rcIpStaticRouteIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpStaticRouteEntry 5 } rcIpStaticRoutePreference OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference." ::= { rcIpStaticRouteEntry 6 } rcIpStaticRouteEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to enable/disable this entry." DEFVAL { true } ::= { rcIpStaticRouteEntry 7 } rcIpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the current status of this entry." DEFVAL { active } ::= { rcIpStaticRouteEntry 8 } rcIpStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries" ::= { rcIpStaticRouteEntry 9 } rcIpStaticRouteLocalNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or dynamic route." DEFVAL { true } ::= { rcIpStaticRouteEntry 10 } rcIpStaticRouteBfdTableSize OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-only STATUS current DESCRIPTION "size of IP static route BFD table." ::= { rcIpStaticRoute 3 } rcIpStaticRouteBfdTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpStaticRouteBfdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to hold next hop addresses on which BFD is enabled." ::= { rcIpStaticRoute 4 } rcIpStaticRouteBfdEntry OBJECT-TYPE SYNTAX RcIpStaticRouteBfdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An IP address of the next hop of the BFD session." INDEX {rcIpStaticRouteBfdNextHop} ::= { rcIpStaticRouteBfdTable 1 } RcIpStaticRouteBfdEntry ::= SEQUENCE { rcIpStaticRouteBfdNextHop IpAddress, rcIpStaticRouteBfdRowStatus RowStatus, rcIpStaticRouteBfdVrfId VrfIdentifier, rcIpStaticRouteBfdVrfName DisplayString } rcIpStaticRouteBfdNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the next hop of the BFD session." ::= { rcIpStaticRouteBfdEntry 1 } rcIpStaticRouteBfdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries" ::= { rcIpStaticRouteBfdEntry 2 } rcIpStaticRouteBfdVrfId OBJECT-TYPE SYNTAX VrfIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Virtual Router to which the IPv4 static route BFD instance belongs." ::= { rcIpStaticRouteBfdEntry 3 } rcIpStaticRouteBfdVrfName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Name of the Virtual Router to which the IPv4 static route BFD instance belongs." ::= { rcIpStaticRouteBfdEntry 4 } rcIpInterVrfStaticRouteTableSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "size of Ip Static Route Table." ::= { rcIpInterVrfStaticRoute 1 } rcIpInterVrfStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpInterVrfStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is actively using the route to forward IP traffic." ::= { rcIpInterVrfStaticRoute 2 } rcIpInterVrfStaticRouteEntry OBJECT-TYPE SYNTAX RcIpInterVrfStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A static route to a particular destination." INDEX { rcIpInterVrfStaticRouteOwnerVrfId, rcIpInterVrfStaticRouteDest, rcIpInterVrfStaticRouteMask, rcIpInterVrfStaticRouteNextHop } ::= { rcIpInterVrfStaticRouteTable 1 } RcIpInterVrfStaticRouteEntry ::= SEQUENCE { rcIpInterVrfStaticRouteOwnerVrfId VrfIdentifier, rcIpInterVrfStaticRouteDest IpAddress, rcIpInterVrfStaticRouteMask IpAddress, rcIpInterVrfStaticRouteNextHop IpAddress, rcIpInterVrfStaticRouteMetric Integer32, rcIpInterVrfStaticRouteIfIndex Integer32, rcIpInterVrfStaticRoutePreference Integer32, rcIpInterVrfStaticRouteEnable TruthValue, rcIpInterVrfStaticRouteStatus INTEGER, rcIpInterVrfStaticRouteRowStatus RowStatus, rcIpInterVrfStaticRouteLocalNextHop TruthValue, rcIpInterVrfStaticRouteNextHopVrfId VrfIdentifier, rcIpInterVrfStaticRouteName DisplayString } rcIpInterVrfStaticRouteOwnerVrfId OBJECT-TYPE SYNTAX VrfIdentifier MAX-ACCESS not-accessible STATUS current DESCRIPTION "Owner VRF id of the static route" ::= { rcIpInterVrfStaticRouteEntry 1 } rcIpInterVrfStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use." ::= { rcIpInterVrfStaticRouteEntry 2 } rcIpInterVrfStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism." ::= { rcIpInterVrfStaticRouteEntry 3 } rcIpInterVrfStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface)." ::= { rcIpInterVrfStaticRouteEntry 4 } rcIpInterVrfStaticRouteMetric OBJECT-TYPE SYNTAX Integer32 (1..'FFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1." DEFVAL { 1 } ::= { rcIpInterVrfStaticRouteEntry 5 } rcIpInterVrfStaticRouteIfIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { rcIpInterVrfStaticRouteEntry 6 } rcIpInterVrfStaticRoutePreference OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference." ::= { rcIpInterVrfStaticRouteEntry 7 } rcIpInterVrfStaticRouteEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to enable/disable this entry." DEFVAL { true } ::= { rcIpInterVrfStaticRouteEntry 8 } rcIpInterVrfStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Used to indicate the current status of this entry." DEFVAL { active } ::= { rcIpInterVrfStaticRouteEntry 9 } rcIpInterVrfStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create/delete entries" ::= { rcIpInterVrfStaticRouteEntry 10 } rcIpInterVrfStaticRouteLocalNextHop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or dynamic route." DEFVAL { true } ::= { rcIpInterVrfStaticRouteEntry 11 } rcIpInterVrfStaticRouteNextHopVrfId OBJECT-TYPE SYNTAX VrfIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Used to indicate nhVrfId in inter-VRF static-route configuration" ::= { rcIpInterVrfStaticRouteEntry 12 } rcIpInterVrfStaticRouteName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively-assigned name for this static route" ::= { rcIpInterVrfStaticRouteEntry 13 } -- rcIpRouting/rcIpRoutingRedistributeRipToOspf Group rcIpRoutingNumRoutesScalars OBJECT IDENTIFIER ::= { rcIpRouting 7 } rcIpRoutingNumRoutesMaximumTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The maximum total number of routes allowed." ::= { rcIpRoutingNumRoutesScalars 1 } rcIpRoutingNumRoutesMaximumLocal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The maximum number of local routes allowed." ::= { rcIpRoutingNumRoutesScalars 2 } rcIpRoutingNumRoutesMaximumStatic OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The maximum number of static routes allowed." ::= { rcIpRoutingNumRoutesScalars 3 } rcIpRoutingNumRoutesCurrentTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The current total number of routes." ::= { rcIpRoutingNumRoutesScalars 4 } rcIpRoutingNumRoutesCurrentLocal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The current number of local routes." ::= { rcIpRoutingNumRoutesScalars 5 } rcIpRoutingNumRoutesCurrentStatic OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The current number of static routes." ::= { rcIpRoutingNumRoutesScalars 6 } -- rcIpSourceInterfaceTable for Circuitless IP rcIpSourceInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RcIpSourceInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table used to maintain source address information." ::= { rcIpRouting 8 } rcIpSourceInterfaceEntry OBJECT-TYPE SYNTAX RcIpSourceInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of Ip Source Interface Table." INDEX { rcIpSourceInterfaceAppId } ::= { rcIpSourceInterfaceTable 1 } RcIpSourceInterfaceEntry ::= SEQUENCE { rcIpSourceInterfaceAppId INTEGER, rcIpSourceInterfaceType INTEGER, rcIpSourceInterfaceId Integer32 } rcIpSourceInterfaceAppId OBJECT-TYPE SYNTAX INTEGER { radius(1), syslog(2), tacacs(3), snmp(4), ssh(5), telnet(6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The application which can be set to use a specific interface as source IP address in packets sent from the switch." ::= { rcIpSourceInterfaceEntry 1 } rcIpSourceInterfaceType OBJECT-TYPE SYNTAX INTEGER { none(1), loopback(2), vlan(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The type of source address used." DEFVAL { none } ::= { rcIpSourceInterfaceEntry 2 } rcIpSourceInterfaceId OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The ID of the interface used as source address. An ID of 0 means no interface is currently set for this entry." DEFVAL { 0 } ::= { rcIpSourceInterfaceEntry 3 } END