BAY-STACK-MULTICAST-FLOODING-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY
        FROM SNMPv2-SMI
    TruthValue, MacAddress, RowStatus
        FROM SNMPv2-TC
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    VlanId
        FROM Q-BRIDGE-MIB
    bayStackMibs
        FROM SYNOPTICS-ROOT-MIB;

bayStackMulticastFloodingMib MODULE-IDENTITY
    LAST-UPDATED    "200906250000Z"
    ORGANIZATION    "Nortel Networks"
    CONTACT-INFO    "Nortel Networks"
    DESCRIPTION
        "BayStack Multicast Flooding MIB

         Copyright 2003 Nortel Networks, Inc.
         All rights reserved.
         This Bay Networks SNMP Management Information Base Specification
         (Specification) embodies Bay Networks' confidential and
         proprietary intellectual property. Bay Networks retains all
         title and ownership in the Specification, including any
         revisions.

         This Specification is supplied 'AS IS,' and Bay Networks makes
         no warranty, either express or implied, as to the use,
         operation, condition, or performance of the Specification."

    REVISION "200906250000Z" -- 25 June 2009
    DESCRIPTION "v5:  Added per-vlan support."

    REVISION "200806250000Z" -- 25 June 2008
    DESCRIPTION "v4:  Added IMPLIED to index of bsmfAllowedInetAddressTable."

    REVISION "200806190000Z" -- 19 June 2008
    DESCRIPTION "v3:  Added support for multicast IP addresses."

    REVISION "200608070000Z" -- 07 August 2006
    DESCRIPTION "v2:  Cleaned up some descriptions."

    REVISION "200405190000Z" -- 19 May 2004
    DESCRIPTION "v1:  Initial version."

    ::= { bayStackMibs 6 }

bsmfNotifications OBJECT IDENTIFIER ::= { bayStackMulticastFloodingMib 0 }
bsmfObjects OBJECT IDENTIFIER ::= { bayStackMulticastFloodingMib 1 }

bsmfMulticastFloodingEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates whether filtering of multicast MAC addresses to be
        flooded is enabled.  If the value of this object is false(2), then
        multicast packets are always flooded to all ports.  Otherwise, if the
        value is true(1), multicast packets that do not match an address in the
        bsmfAllowedAddressTable are flooded only to IGMP multicast router
        ports, and multicast packets that do match an address in the
        bsmfAllowedAddressTable are flooded to all ports."
    ::= { bsmfObjects 1 }

-- =========================================================================
-- Multicast Flooding Allowed MAC Address Configuration Table
-- =========================================================================

bsmfAllowedAddressTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BsmfAllowedAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is used to specify particular multicast MAC addresses
         that are allowed to be flooded to all ports."
    ::= { bayStackMulticastFloodingMib 2 }

bsmfAllowedAddressEntry OBJECT-TYPE
    SYNTAX BsmfAllowedAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the bsmfAllowedAddressTable."
    INDEX { bsmfAllowedAddressMacAddr }
    ::= { bsmfAllowedAddressTable 1 }

BsmfAllowedAddressEntry ::=
    SEQUENCE {
        bsmfAllowedAddressMacAddr   MacAddress,
        bsmfAllowedAddressRowStatus RowStatus
    }

bsmfAllowedAddressMacAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A MAC address that is allowed to flood all ports."
    ::= { bsmfAllowedAddressEntry 1 }

bsmfAllowedAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object controls creation and deletion of rows in the table."
    ::= { bsmfAllowedAddressEntry 2 }

-- =========================================================================
-- Multicast Flooding Allowed IP Address Configuration Table
-- =========================================================================

bsmfAllowedInetAddressTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BsmfAllowedInetAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is used to specify particular multicast IP addresses
         that are allowed to be flooded to all ports."
    ::= { bayStackMulticastFloodingMib 3 }

bsmfAllowedInetAddressEntry OBJECT-TYPE
    SYNTAX BsmfAllowedInetAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the bsmfAllowedInetAddressTable."
    INDEX { bsmfAllowedInetAddressType, IMPLIED bsmfAllowedInetAddress }
    ::= { bsmfAllowedInetAddressTable 1 }

BsmfAllowedInetAddressEntry ::=
    SEQUENCE {
        bsmfAllowedInetAddressType      InetAddressType,
        bsmfAllowedInetAddress          InetAddress,
        bsmfAllowedInetAddressRowStatus RowStatus
    }

bsmfAllowedInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The type of address contained in the corresponding instance of
        bsmfAllowedInetAddress.  Currently, only values of ipv4(1) and
        ipv6(2) are allowed."
    ::= { bsmfAllowedInetAddressEntry 1 }

bsmfAllowedInetAddress OBJECT-TYPE
    SYNTAX      InetAddress (SIZE(4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A multicast IP address that is allowed to flood all ports.
        Unicast and broadcast addresses are not allowed."
    ::= { bsmfAllowedInetAddressEntry 2 }

bsmfAllowedInetAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object controls creation and deletion of rows in the table."
    ::= { bsmfAllowedInetAddressEntry 3 }

-- =========================================================================
-- VLAN Multicast Flooding Configuration Table
-- =========================================================================

bsmfVlanTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BsmfVlanEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is used to control per-VLAN whether multicast flooding
         is enabled."
    ::= { bayStackMulticastFloodingMib 4 }

bsmfVlanEntry OBJECT-TYPE
    SYNTAX BsmfVlanEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the bsmfVlanTable."
    INDEX { bsmfVlanId }
    ::= { bsmfVlanTable 1 }

BsmfVlanEntry ::=
    SEQUENCE {
        bsmfVlanId                       VlanId,
        bsmfVlanMulticastFloodingEnabled TruthValue
    }

bsmfVlanId OBJECT-TYPE
    SYNTAX      VlanId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An existing VLAN."
    ::= { bsmfVlanEntry 1 }

bsmfVlanMulticastFloodingEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object indicates whether filtering of multicast MAC addresses to
        be flooded is enabled on a per-vlan basis.  If the value of this object
        is false(2), then multicast packets are always flooded to all ports
        of a vlan.  Otherwise, if the value is true(1), multicast packets that
        do not match an address in the bsmfVlanAllowedAddressTable are flooded
        only to IGMP multicast router ports, and multicast packets that do
        match an address in the bsmfAllowedAddressTable are flooded to all
        ports."
    ::= { bsmfVlanEntry 2 }

-- =========================================================================
-- VLAN Multicast Flooding Allowed MAC Address Configuration Table
-- =========================================================================

bsmfVlanAllowedAddressTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BsmfVlanAllowedAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is used to specify particular multicast MAC addresses
         that are allowed to be flooded to all ports on a per-vlan basis."
    ::= { bayStackMulticastFloodingMib 5 }

bsmfVlanAllowedAddressEntry OBJECT-TYPE
    SYNTAX BsmfVlanAllowedAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the bsmfVlanAllowedAddressTable."
    INDEX { bsmfVlanAllowedAddressVlanId, bsmfVlanAllowedAddressMacAddr }
    ::= { bsmfVlanAllowedAddressTable 1 }

BsmfVlanAllowedAddressEntry ::=
    SEQUENCE {
        bsmfVlanAllowedAddressVlanId    VlanId,
        bsmfVlanAllowedAddressMacAddr   MacAddress,
        bsmfVlanAllowedAddressRowStatus RowStatus
    }

bsmfVlanAllowedAddressVlanId OBJECT-TYPE
    SYNTAX      VlanId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An existing VLAN ID."
    ::= { bsmfVlanAllowedAddressEntry 1 }

bsmfVlanAllowedAddressMacAddr OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A MAC address that is allowed to flood all ports."
    ::= { bsmfVlanAllowedAddressEntry 2 }

bsmfVlanAllowedAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object controls creation and deletion of rows in the table."
    ::= { bsmfVlanAllowedAddressEntry 3 }

-- =========================================================================
-- VLAN Multicast Flooding Allowed IP Address Configuration Table
-- =========================================================================

bsmfVlanAllowedInetAddressTable OBJECT-TYPE
    SYNTAX SEQUENCE OF BsmfVlanAllowedInetAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is used to specify particular multicast IP addresses
         that are allowed to be flooded to all ports on a per-vlan basis."
    ::= { bayStackMulticastFloodingMib 6 }

bsmfVlanAllowedInetAddressEntry OBJECT-TYPE
    SYNTAX BsmfVlanAllowedInetAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry in the bsmfVlanAllowedInetAddressTable."
    INDEX { bsmfVlanAllowedInetAddressVlanId,
            bsmfVlanAllowedInetAddressType,
            IMPLIED bsmfVlanAllowedInetAddress }
    ::= { bsmfVlanAllowedInetAddressTable 1 }

BsmfVlanAllowedInetAddressEntry ::=
    SEQUENCE {
        bsmfVlanAllowedInetAddressVlanId    VlanId,
        bsmfVlanAllowedInetAddressType      InetAddressType,
        bsmfVlanAllowedInetAddress          InetAddress,
        bsmfVlanAllowedInetAddressRowStatus RowStatus
    }

bsmfVlanAllowedInetAddressVlanId OBJECT-TYPE
    SYNTAX      VlanId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An existing VLAN ID."
    ::= { bsmfVlanAllowedInetAddressEntry 1 }

bsmfVlanAllowedInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The type of address contained in the corresponding instance of
        bsmfVlanAllowedInetAddress.  Currently, only values of ipv4(1) and
        ipv6(2) are allowed."
    ::= { bsmfVlanAllowedInetAddressEntry 2 }

bsmfVlanAllowedInetAddress OBJECT-TYPE
    SYNTAX      InetAddress (SIZE(4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A multicast IP address that is allowed to flood all ports.
        Unicast and broadcast addresses are not allowed."
    ::= { bsmfVlanAllowedInetAddressEntry 3 }

bsmfVlanAllowedInetAddressRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object controls creation and deletion of rows in the table."
    ::= { bsmfVlanAllowedInetAddressEntry 4 }

END