BAY-STACK-EDM-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY, Integer32
        FROM SNMPv2-SMI
    bayStackMibs
        FROM SYNOPTICS-ROOT-MIB;

bayStackEdmMib MODULE-IDENTITY
    LAST-UPDATED    "201310110000Z"
    ORGANIZATION    "Avaya Networks"
    CONTACT-INFO    "Avaya Networks"
    DESCRIPTION
        "Enterprise Device Manager (EDM) MIB for the Avaya stackable 
         Ethernet Routing Switches family

         Copyright 2013 Avaya Networks
         All rights reserved.
         This Avaya Networks SNMP Management Information Base
         Specification embodies Avaya Networks' confidential and
         proprietary intellectual property. Avaya Networks retains
         all title and ownership in the Specification, including any
         revisions.

         This Specification is supplied 'AS IS,' and Avaya Networks
         makes no warranty, either express or implied, as to the use,
         operation, condition, or performance of the Specification."

    REVISION "201310110000Z" -- 11 October 2013
    DESCRIPTION "v3:  Added Integer32 to IMPORTS."
	 
    REVISION "201302130000Z" -- 13 February 2013
    DESCRIPTION "v2:  Added bsEdmInactivityTimeout object."

    REVISION "200908200000Z" -- 20 August 2009
    DESCRIPTION "v1:  Initial version."

    ::= { bayStackMibs 36 }

bayStackEdmNotifications OBJECT IDENTIFIER ::= { bayStackEdmMib 0 }
bayStackEdmObjects       OBJECT IDENTIFIER ::= { bayStackEdmMib 1 }

-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

-- -------------------------------------------------------------
-- Scalar Objects
-- -------------------------------------------------------------

bsEdmScalars OBJECT IDENTIFIER ::= { bayStackEdmObjects 1 }

bsEdmHelpFilePath OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..327))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is used to specify the location of the EDM help file.
         The value is an ASCII string similar to a URL, and must be in one
         of the following formats:
           - 'usb://<filename>' - the help file is located on the usb port
                          of the switch, if not in stack, or on the usb 
                          port of the base unit, if in stack.
           - 'usb://<unit-number>/<filename>' - the help file is located
                          on the usb port of the switch, if not in stack,
                          or on the usb port of the specified unit,
                          if in stack. The unit number must be between 1 
                          and 8.
           - 'tftp://<ip-address>/<filename>' - the help file is located
                          on the TFTP server at the specified IP address.
           - 'tftp://<hostname>/<filename>' - the help file is located on
                          the TFTP server at the specified host. The hostname
                          must have at most 64 characters in length.

         In each of the supported formats, the filename must have at most
         255 characters in length."
    ::= { bsEdmScalars 1 }
    
bsEdmInactivityTimeout OBJECT-TYPE
    SYNTAX      Integer32 (30..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "Used to indicate the amount of idle time, in seconds,
            to wait before timing out an EDM session."
    DEFVAL      { 900 }
    ::= { bsEdmScalars 2 }

END