TROPIC-IEEE8023br-MIB DEFINITIONS ::= BEGIN -- (c) Copyright 2021 Nokia Networks. All rights reserved. -- This software is the confidential and proprietary property of -- Nokia and may only be used in accordance with the terms of the -- license agreement provided with this software. IMPORTS MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter64, Unsigned32 FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC TmnxPortID FROM TN-TC-MIB tnPortModules,tnIEEE8023brMIB FROM TROPIC-GLOBAL-REG; tnIEEE8023brMibModule MODULE-IDENTITY LAST-UPDATED "201608150000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia Attn: Jeff Donnelly 600 Mountain Avenue New Providence, NJ 07974 Phone: +1 732 221 6408 Email: jeff.donnelly@nokia.com" DESCRIPTION "Initial version, IEEE 802.3br-2016 MIB definition." REVISION "201608150000Z" -- August 15, 2016 DESCRIPTION "Initial version published as part of IEEE Std 802.1Qbu." ::= { tnPortModules 9 } ------------------------------------------------------------------------------- -- subtrees in the Preemption MIB ------------------------------------------------------------------------------- tnIEEE8023brEquipmentObjectsNotifications OBJECT IDENTIFIER ::= { tnIEEE8023brMIB 0 } tnIEEE8023brObjects OBJECT IDENTIFIER ::= { tnIEEE8023brMIB 1 } tnIEEE8023brObjectsConformance OBJECT IDENTIFIER ::= { tnIEEE8023brMIB 2 } ieee8023brCompliances OBJECT IDENTIFIER ::= { tnIEEE8023brObjectsConformance 1 } ieee8023brGroups OBJECT IDENTIFIER ::= { tnIEEE8023brObjectsConformance 2 } tnIEEE8023brObjectsParameters OBJECT IDENTIFIER ::= { tnIEEE8023brObjects 1 } ------------------------------------------------------------------------------- -- lldpXdot3LocSystemsGroupTable ------------------------------------------------------------------------------- lldpXdot3LocSystemsGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3LocSystemsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP Local System Group." ::= { tnIEEE8023brObjectsParameters 1 } lldpXdot3LocSystemsGroupEntry OBJECT-TYPE SYNTAX LldpXdot3LocSystemsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in lldpXdot3LocSystemsGroupTable" INDEX { aLldpXdot3LocPortID } ::= { lldpXdot3LocSystemsGroupTable 1 } LldpXdot3LocSystemsGroupEntry ::= SEQUENCE { aLldpXdot3LocPortID TmnxPortID, aLldpXdot3LocPreemptSupported TruthValue, aLldpXdot3LocPreemptEnabled TruthValue, aLldpXdot3LocPreemptActive TruthValue, aLldpXdot3LocAddFragSize TruthValue } aLldpXdot3LocPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "aLldpXdot3LocPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { lldpXdot3LocSystemsGroupEntry 1 } aLldpXdot3LocPreemptSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value used to indicate whether the given port (associated with the local System) supports the preemption capability." ::= { lldpXdot3LocSystemsGroupEntry 2 } aLldpXdot3LocPreemptEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value used to indicate whether the preemption capability is enabled on the given port associated with the local System." ::= { lldpXdot3LocSystemsGroupEntry 3 } aLldpXdot3LocPreemptActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value used to indicate whether the preemption capability is active on the given port associated with the local System." ::= { lldpXdot3LocSystemsGroupEntry 4 } aLldpXdot3LocAddFragSize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A 2-bit integer value used to indicate the minimum size of non-final fragments supported by the receiver on the given port associated with the local System. This value is expressed in units of 64 octets of additional fragment length. The minimum non-final fragment size is (aLldpXdot3LocAddFragSize+1) x 64 octets." ::= { lldpXdot3LocSystemsGroupEntry 5 } ------------------------------------------------------------------------------- -- lldpXdot3RemSystemsGroupTable ------------------------------------------------------------------------------- lldpXdot3RemSystemsGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF LldpXdot3RemSystemsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP Remote System Group." ::= { tnIEEE8023brObjectsParameters 2 } lldpXdot3RemSystemsGroupEntry OBJECT-TYPE SYNTAX LldpXdot3RemSystemsGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in lldpXdot3RemSystemsGroupTable" INDEX { aLldpXdot3RemPortID } ::= { lldpXdot3RemSystemsGroupTable 1 } LldpXdot3RemSystemsGroupEntry ::= SEQUENCE { aLldpXdot3RemPortID TmnxPortID, aLldpXdot3RemPreemptSupported TruthValue, aLldpXdot3RemPreemptEnabled TruthValue, aLldpXdot3RemPreemptActive TruthValue, aLldpXdot3RemAddFragSize TruthValue } aLldpXdot3RemPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "aLldpXdot3RemPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { lldpXdot3RemSystemsGroupEntry 1 } aLldpXdot3RemPreemptSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value used to indicate whether the given port (associated with the remote system) supports the preemption capability." ::= { lldpXdot3RemSystemsGroupEntry 2 } aLldpXdot3RemPreemptEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value used to indicate whether the preemption capability is enabled on the given port associated with the remote system." ::= { lldpXdot3RemSystemsGroupEntry 3 } aLldpXdot3RemPreemptActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A read-only Boolean value used to indicate whether the preemption capability is active on the given port associated with the remote system." ::= { lldpXdot3RemSystemsGroupEntry 4 } aLldpXdot3RemAddFragSize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "A 2-bit integer value used to indicate, in units of 64 octets, the minimum number of octets over 64 octets required in non-final fragments by the receiver on the given port associated with the remote system. The minimum non-final fragment size is (aLldpXdot3LocAddFragSize+1)x 64 octets." ::= { lldpXdot3RemSystemsGroupEntry 5 } ------------------------------------------------------------------------------- -- MACMergeEntityTable ------------------------------------------------------------------------------- macMergeEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF MacMergeEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MACMergeEntity managed object." ::= { tnIEEE8023brObjectsParameters 3 } macMergeEntityEntry OBJECT-TYPE SYNTAX MacMergeEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in MACMergeEntityTable" INDEX { aMACMergePortID } ::= { macMergeEntityTable 1 } MacMergeEntityEntry ::= SEQUENCE { aMACMergePortID TmnxPortID, aMACMergeSupport INTEGER, aMACMergeStatusVerify INTEGER, aMACMergeEnableTx INTEGER, aMACMergeVerifyDisableTx INTEGER, aMACMergeStatusTx INTEGER, aMACMergeVerifyTime Integer32, aMACMergeAddFragSize Integer32, aMACMergeFrameAssErrorCount Counter64, aMACMergeFrameSmdErrorCount Counter64, aMACMergeFrameAssOkCount Counter64, aMACMergeFragCountRx Counter64, aMACMergeFragCountTx Counter64, aMACMergeHoldCount Counter64, aMACMergeAcctPolicyId Unsigned32 } aMACMergePortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "aMACMergePortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table." ::= { macMergeEntityEntry 1 } aMACMergeSupport OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates (when accessed via a GET operation) whether the given device supports a MAC Merge sublayer. The SET operation shall have no effect on a device." ::= { macMergeEntityEntry 2 } aMACMergeStatusVerify OBJECT-TYPE SYNTAX INTEGER { unknown(0), initial(1), verifying(2), succeeded(3), failed(4), disabled(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates (when accessed via a GET operation) the status of the MAC Merge sublayer verification on the given device. The SET operation shall have no effect on a device: unknown: Verification status is unknown. initial: The Verify State diagram (Figure 99 C8) is in the state, INIT_VERIFICATION. verifying: The Verify State diagram is in the state VERIFICATION_IDLE, SEND_VERIFY or WAIT_FOR_RESPONSE. succeeded: Indicates that the Verify State diagram is in the state VERIFIED. failed: The Verify State diagram is in the state VERIFY_FAIL. disabled: Verification of preemption operation is disabled." ::= { macMergeEntityEntry 3 } aMACMergeEnableTx OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates (when accessed via a GET operation) the status of the MAC Merge sublayer on the given device in the transmit direction. The status of the MAC Merge sublayer may be modified to the indicated value via a SET operation. This attribute maps to the variable pEnable;" ::= { macMergeEntityEntry 4 } aMACMergeVerifyDisableTx OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This attribute indicates (when accessed via a GET operation) the status of the Verify function of MAC Merge sublayer on the given device in the transmit direction. The status of the Verify function may be modified to the indicated value via a SET operation. This attribute maps to the variable disableVerify." ::= { macMergeEntityEntry 5 } aMACMergeStatusTx OBJECT-TYPE SYNTAX INTEGER { unknown(0), inactive(1), active(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates (when accessed via a GET operation) the status of the MAC Merge sublayer on the given device in the transmit direction. The SET operation shall have no effect on a device. This attribute maps to the variable preempt; unknown: Transmit preemption status is unknown inactive: Transmit preemption is inactive active: Transmit preemption is active." ::= { macMergeEntityEntry 6 } aMACMergeVerifyTime OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this attribute defines the nominal wait time between verification attempts in milliseconds. Valid range is 1 to 128 inclusive. The default value is 10. This attribute maps to the variable verifyTime" DEFVAL { 10 } ::= { macMergeEntityEntry 7 } aMACMergeAddFragSize OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-create STATUS current DESCRIPTION "A 2-bit integer value used to indicate the value of addFragSize variable used by the Transmit Processing State Diagram." ::= { macMergeEntityEntry 8 } aMACMergeFrameAssErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC frames with reassembly errors. The counter is incremented by one every time the ASSEMBLY_ERROR state in the Receive Processing State Diagram is entered. This counter has a maximum increment rate of 160 000 counts per second at 100 Mb/s" ::= { macMergeEntityEntry 9 } aMACMergeFrameSmdErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of received MAC frames / MAC frame fragments rejected due to unknown SMD value or arriving with an SMD-C when no frame is in progress. The counter is incremented by one every time the BAD_FRAG state in the Receive Processing State Diagram is entered and every time the WAIT_FOR_DV_FALSE state is entered due to the invocation of the SMD_DECODE function returning the value 'ERR'. This counter has a maximum increment rate of 160 000 counts per second at 100 Mb/s." ::= { macMergeEntityEntry 10 } aMACMergeFrameAssOkCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC frames that were successfully reassembled and delivered to MAC. The counter is incremented by one every time the FRAME_COMPLETE state in the Receive Processing state diagram (see Figure 99 C6) is entered if the state CHECK_FOR_RESUME was previously entered while processing the packet. This counter has a maximum increment rate of 160 000 counts per second at 100 Mb/s." ::= { macMergeEntityEntry 11 } aMACMergeFragCountRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of additional mPackets received due to preemption. The counter is incremented by one every time the state CHECK_FRAG_CNT in the Receive Processing State Diagram (see Figure 99 C6) is entered. This counter has a maximum increment rate of 160 000 counts per second at 100 Mb/s." ::= { macMergeEntityEntry 12 } aMACMergeFragCountTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of additional mPackets transmitted due to preemption. This counter is incremented by one every time the SEND_SMD_C state in the Transmit Processing State Diagram (see Figure 99 C5) is entered. This counter has a maximum increment rate of 160 000 counts per second at 100 Mb/s." ::= { macMergeEntityEntry 13 } aMACMergeHoldCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of times the variable hold (see 99.4.7.3) transitions from FALSE to TRUE. This counter has a maximum increment rate of 160 000 counts per second at 100 Mb/s." ::= { macMergeEntityEntry 14 } aMACMergeAcctPolicyId OBJECT-TYPE SYNTAX Unsigned32 (0..99) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the accounting policy must be defined prior to associating the policy with the mmac port. Accounting policies can only be associated with network ports. A non-zero value indicates the tmnxLogApPolicyId index identifying the policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is associated with this port. A zero value indicates that there is no accounting policy associated with this port" DEFVAL { 0 } ::= { macMergeEntityEntry 15 } ------------------------------------------------------------------------------- -- units of conformance ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- -- the ieee803brGroup group ------------------------------------------------------------------------------- ieee8023brGroup OBJECT-GROUP OBJECTS { aLldpXdot3LocPreemptSupported, aLldpXdot3LocPreemptEnabled, aLldpXdot3LocPreemptActive, aLldpXdot3LocAddFragSize, aLldpXdot3RemPreemptSupported, aLldpXdot3RemPreemptEnabled, aLldpXdot3RemPreemptActive, aLldpXdot3RemAddFragSize, aMACMergeSupport, aMACMergeStatusVerify, aMACMergeEnableTx, aMACMergeVerifyDisableTx, aMACMergeStatusTx, aMACMergeVerifyTime, aMACMergeAddFragSize, aMACMergeFrameAssErrorCount, aMACMergeFrameSmdErrorCount, aMACMergeFrameAssOkCount, aMACMergeFragCountRx, aMACMergeFragCountTx, aMACMergeHoldCount, aMACMergeAcctPolicyId } STATUS current DESCRIPTION "Objects that allow management of IEEE 802.3br." ::= { ieee8023brGroups 1 } ------------------------------------------------------------------------------- -- compliance statements ------------------------------------------------------------------------------- ieee8023brCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices supporting IEEE 802.3br." MODULE -- this module MANDATORY-GROUPS { ieee8023brGroup } ::= { ieee8023brCompliances 1 } END -- DEFINITION OF TROPIC-IEEE8023br-MIB