TN-SAS-QOS-MIB DEFINITIONS ::= BEGIN -- (c) Copyright 2021 Nokia Networks. All rights reserved. -- This software is the confidential and proprietary property of -- Nokia and may only be used in accordance with the terms of the -- license agreement provided with this software. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter64 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TruthValue, TimeStamp FROM SNMPv2-TC tnSASObjs, tnSASModules FROM TROPIC-GLOBAL-REG Dot1PPriority, TItemDescription, TNamedItem, TDSCPNameOrEmpty, TFCName, TLspExpValue, TQueueId, TEgressQueueId, TSapIngressMeterId, TNetworkIngressMeterId, TMeterMode, TPIRRate, TPlcyMode, TQWeight, TMplsLspExpProfMapID, TPolicyID, TItemScope, TBurstSize, TAdaptationRule, TCIRRate,TQPreempt FROM TN-TC-MIB tnSysSwitchId FROM TROPIC-SYSTEM-MIB tnSvcId FROM TN-SERV-MIB tnSapPortId, tnSapEncapValue FROM TN-SAP-MIB tnSapIngressIndex, tnNetworkPolicyIndex, tnSlopePolicyEntry, tnPortSchedulerPlcyEntry, tnSapIngressFCEntry, tnSlopePolicy, tnSapIngressEntry, tnNetworkPolicyEntry, tnNetworkQueueEntry,tnPortSchedulerPlcyName FROM TN-QOS-MIB ; tnSASQosMIBModule MODULE-IDENTITY LAST-UPDATED "201907120000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia 7x50 Support Web: http://www.nokia.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision Quality of Service features on Nokia 7x50 systems. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "201907120000Z" DESCRIPTION "Added the following MIB table: tnSASPortPreemptSchedulerPlcyTable." REVISION "201806220000Z" DESCRIPTION "Modified ranges of the following textual conventions: TIngressCIRRate TIngressPIRRate." REVISION "201711100000Z" DESCRIPTION "Modified ranges of the following textual conventions: TIngressCIRRate TIngressPIRRate TIngressBurstSize." REVISION "201511020000Z" DESCRIPTION "Added the following MIB table: tMplsLspExpProfMapTable tMplsLspExpProfileTable." REVISION "201308220000Z" DESCRIPTION "Added the following to tnNetworkPolicyExtnTable: tnNetworkEgressRemarkType." REVISION "201308160000Z" DESCRIPTION "Added tnQosFrameBasedAccntTable by including the following previously commented scalars: tnQosIngressFrameBasedAccnt tnQosEgressFrameBasedAccnt." REVISION "201212050000Z" DESCRIPTION "Commented out unsupported MIB tables and attributes for 1830." REVISION "201209010000Z" DESCRIPTION "Changed the following index from read-only to not-accessible: tnSapIngQosMeterId." REVISION "200801090000Z" DESCRIPTION "Rev 1.0 09 Jan 2008 00:00 This is the 1.0 release of the TIMETRA-SAS-GLOBAL-MIB." ::= { tnSASModules 5 } tnSASQosObjects OBJECT IDENTIFIER ::= { tnSASObjs 1 } -- tnSASQosNotifyPrefix OBJECT IDENTIFIER ::= { tnSASNotifyPrefix 1} -- tnSASQosNotifications OBJECT IDENTIFIER ::= { tnSASQosNotifyPrefix 0} -- tnSASQosConformance OBJECT IDENTIFIER ::= { tnSASConfs 1 } tnAccessEgressObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 1 } tnSASSapIngressObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 2 } tnSASNetworkIngressObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 3 } tnSASSlopeObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 4 } tnSASSchedulerObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 5 } tnQosFrameBasedAccntObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 6 } tnSASNetworkObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 7 } tnMplsQosObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 8 } -- tnSASQueueMgmtObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 9 } -- tnSASSapEgressObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 10 } tnSASGeneralQosObjects OBJECT IDENTIFIER ::= { tnSASQosObjects 21 } -- -- TEXTUAL-CONVENTIONs for Nokia 7x50 SR series QoS Elements -- -- TPolicyID ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the identification number of a policy." -- SYNTAX Unsigned32 (0..65535) -- TSapIngressPolicyID ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the identification number of a SAP ingress policy." -- SYNTAX TPolicyID -- TSapEgressPolicyID ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the identification number of a SAP egress policy." -- SYNTAX TPolicyID (1..65535) TAccessEgressPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a Access egress policy." SYNTAX TPolicyID (1..65535) -- TNetworkPolicyID ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the identification number of a network policy." -- SYNTAX TPolicyID (1..65535) TRemarkPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a Remark policy." SYNTAX TPolicyID (1..65535) -- TItemScope ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "This textual-convention determines some aspects of an item's -- behavior regarding creation and use, unused entry garbage collection, -- and automated promulgation by Element Management System to -- other systems in the service domain. -- -- TItemScope applies to SAP-ingress, SAP-egress, and Network policies, -- and to IP filters and MAC filters. -- -- exclusive: -- -- When the scope of an item is defined as exclusive, the item can -- only be applied once, for example to a single SAP. Attempting -- to assign the policy to a second SAP is not allowed and will -- result in an error. If the item is removed from the exclusive -- SAP, it will become available for assignment to another -- exclusive SAP. -- -- A non-applied exclusive scope policy is a candidate to be removed -- from the system by a TBD garbage collection command. -- -- The system default policies cannot be put into the exclusive scope. -- An error will be generated if scope exclusive is executed in -- any policies with a policy-id equal to 1. -- -- template: -- -- When the scope of an item is defined as template, the item can be -- applied any number of times. Policies with template scope -- will not be considered for deletion by a TBD garbage collection -- command; all items of scope 'template' must be deleted explicitly. -- -- The system default policies will always be scope template. -- An error will occur if a policy-id 1 is attempted to be -- set to scope exclusive." -- SYNTAX INTEGER { exclusive(1), template(2) } -- TItemMatch ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "when set to off, the item is not matched. -- when set to false, packets without the item match the filter. -- when set to true, packets with the item match the filter." -- SYNTAX INTEGER { off(1), false(2), true(3) } -- TPriority ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the priority to apply to a packet" -- SYNTAX INTEGER { low(1), high(2) } -- TPriorityOrDefault ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the priority to apply to a packet. -- when set to default(3), the priority from the default-action is used." -- SYNTAX INTEGER { low(1), high(2), default(3) } -- TProfile ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "the profile marking of a packet at the ingress." -- SYNTAX INTEGER { in(1), out(2) } -- TProfileOrNone ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "Profile marking of a packet." -- SYNTAX INTEGER { none (0), in(1), out(2) } -- TAdaptationRule ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The adaptation rule to be applied to calcluate the operational values -- for the specified entity." -- SYNTAX INTEGER { -- max (1), -- min (2), -- closest(3) -- } -- TRemarkType ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The remarking to be used." -- SYNTAX INTEGER { -- none (1), -- dscp (2), -- precedence (3) -- } -- TPrecValue ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The precedence bits as used in the IPv4 header. This constitutes of -- 3 bits and hence can hold the values from 0 to 7." -- SYNTAX INTEGER (0..7) -- TPrecValueOrNone ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The precedence bits as used in the IPv4 header. This constitutes of -- 3 bits and hence can hold the values from 0 to 7. The value '-1' -- specifies that the precedence value is undefined/unused." -- SYNTAX INTEGER (-1 | 0..7) TIngressCIRRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate." SYNTAX Integer32 (-1 | 0..200000000) TIngressPIRRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate." SYNTAX Integer32 (-1 | 0..200000000) -- TCIRRate ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The rate to be used in kbps. The value -1 means maximum rate." -- SYNTAX INTEGER (-1 | 0..100000000) -- TPIRRate ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The rate to be used in kbps. The value -1 means maximum rate." -- SYNTAX INTEGER (-1 | 1..100000000) -- TPIRRateOrZero ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The rate to be used in kbps. The value -1 means maximum rate. The -- value 0 means undefined rate." -- SYNTAX INTEGER (-1 | 0..100000000) TIngressBurstSize ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The amount of buffer space (in Kbits) assigned to a meter. The value -1 means default value" SYNTAX Integer32 (-1 | 1..2146959) -- TBurstSize ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The amount of buffer space (in kbytes) assigned to a queue. -- The value -1 means that the actual value is derived from the -- corresponding buffer policy's default value." -- SYNTAX INTEGER (-1 | 0..131072) -- TBurstPercent ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The percentage of buffer space assigned to a queue that is -- reserved for some purpose." -- SYNTAX INTEGER (0..100) -- TBurstHundredthsOfPercent ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The percentage of buffer space assigned to a queue that is -- reserved for some purpose, defined to two decimal places." -- SYNTAX Integer32 (0..10000) -- TBurstPercentOrDefault ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The percentage of buffer space assigned to a queue that is -- reserved for some purpose. -- The value -1 means that the actual value is derived from the -- corresponding buffer policy's default value." -- SYNTAX INTEGER (-1 | 0..100) -- TRatePercent ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The percentage of maximum rate allowed." -- SYNTAX INTEGER (0..100) -- TLevel ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The level of the specified entity while feeding into the parent." -- SYNTAX INTEGER (1..8) -- TLevelOrDefault ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The level of the specified entity while feeding into the parent. -- The value 0 is used to denote a default value." -- SYNTAX INTEGER (0|1..8) -- TWeight ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The weight of the specified entity while feeding into the parent." -- SYNTAX INTEGER (0..100) -- TQWeight ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The Queue weight of the specified entity." -- SYNTAX INTEGER (0 |1..100) -- TMeterMode ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "Meter mode" -- SYNTAX INTEGER { -- priority(1), -- profile (2) -- } -- TPlcyMode ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "Policy mode " -- SYNTAX INTEGER { -- strict (0), -- roundRobin (1), -- weightedRoundRobin (2), -- weightedDeficitRoundRobin (3) -- } TMeterRateMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime." SYNTAX INTEGER { trtcm (1), srtcm (2), trtcm1 (3), trtcm2 (4) } TPlcyQuanta ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Policy Quata" SYNTAX Integer32 -- TQueueMode ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The mode in which the queue is operating. -- -- If the queue is operating in the 'priority' mode, it is -- capable of handling traffic differently with two distinct -- priorities. These priorities are assigned by the stages -- preceding the queueing framework in the system. -- -- When the queue is operating in the 'profile' mode, in other -- words the color aware mode, the queue tries to provide the -- appropriate bandwidth to the packets with different profiles. -- -- The profiles are assigned according to the configuration of the -- forwarding class or the sub-forwarding class. -- -- In 'priority' mode, the queue does not have the functionality -- to support the profiled traffic and in such cases the queue -- will have a degraded performance. However, the converse is not -- valid and a queue in 'profile' mode should be capable of -- supporting the different priorities of traffic." -- SYNTAX INTEGER { -- priority(1), -- profile (2) -- } -- TEntryIndicator ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "Uniquely identifies an entry in a policy or filter table. The -- value 0 is not a valid entry-id. When used as insertion point -- the value 0 indicates that entries must be inserted at the very -- beginning, i.e.before the first entry defined." -- SYNTAX Unsigned32 (0..65535) -- TEntryId ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "uniquely identifies an entry in a policy or filter table. -- to facilitate insertion of entries in the tables, we recommend -- assigning entry IDs by 10s: 10, 20, 30, etc. " -- SYNTAX TEntryIndicator (1..65535) -- TMatchCriteria ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "determines whether the entry matches traffic using IP match -- entries or MAC match entries." -- SYNTAX INTEGER { ip(1), mac(2), none(3), dscp(4), dot1p(5), prec(6) } -- TAtmTdpDescrType ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TAtmTdpDescrType is an enumerated integer whose value -- indicates the types of cell loss priority to be used in -- conjunction with traffic parameters. -- -- The following values are outlined: -- Integer Value Interpretation -- ------------- ------------------------ -- clp0And1pcr PCR applies to CLP 0 and -- CLP 1 cell flows -- clp0And1pcrPlusClp0And1scr PCR applies to CLP 0 and -- CLP 1 cell flows. -- SCR applies to CLP 0 and -- CLP 1 cell flows. -- clp0And1pcrPlusClp0scr PCR applies to CLP 0 and -- CLP 1 cell flows. -- SCR applies to CLP 0 cell flows. -- clp0And1pcrPlusClp0scrTag PCR applies to CLP 0 and -- CLP 1 cell flows. -- SCR applies to CLP 0 cell flows. " -- SYNTAX INTEGER { -- clp0And1pcr(0), -- clp0And1pcrPlusClp0And1scr(1), -- clp0And1pcrPlusClp0scr(2), -- clp0And1pcrPlusClp0scrTag(3) -- } -- TEntryIndicator ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "Uniquely identifies an entry in a policy or filter table. The -- value 0 is not a valid entry-id. When used as insertion point -- the value 0 indicates that entries must be inserted at the very -- beginning, i.e.before the first entry defined." -- SYNTAX Unsigned32 (0..65535) -- TEntryId ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "uniquely identifies an entry in a policy or filter table. -- to facilitate insertion of entries in the tables, we recommend -- assigning entry IDs by 10s: 10, 20, 30, etc. " -- SYNTAX TEntryIndicator (1..65535) -- TMatchCriteria ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "determines whether the entry matches traffic using IP match -- entries or MAC match entries." -- SYNTAX INTEGER { ip(1), mac(2), none(3), dscp(4), dot1p(5), prec(6) } -- TAtmTdpDescrType ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TAtmTdpDescrType is an enumerated integer whose value -- indicates the types of cell loss priority to be used in -- conjunction with traffic parameters. -- -- The following values are outlined: -- Integer Value Interpretation -- ------------- ------------------------ -- clp0And1pcr PCR applies to CLP 0 and -- CLP 1 cell flows -- clp0And1pcrPlusClp0And1scr PCR applies to CLP 0 and -- CLP 1 cell flows. -- SCR applies to CLP 0 and -- CLP 1 cell flows. -- clp0And1pcrPlusClp0scr PCR applies to CLP 0 and -- CLP 1 cell flows. -- SCR applies to CLP 0 cell flows. -- clp0And1pcrPlusClp0scrTag PCR applies to CLP 0 and -- CLP 1 cell flows. -- SCR applies to CLP 0 cell flows. " -- SYNTAX INTEGER { -- clp0And1pcr(0), -- clp0And1pcrPlusClp0And1scr(1), -- clp0And1pcrPlusClp0scr(2), -- clp0And1pcrPlusClp0scrTag(3) -- } TSlopeDropRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The slope drop rate. Mapping of drop-rate values in percentage: 0 - 100% cliff drop 1 - 6.25% 2 - 3.125% 3 - 1.5625% 4 - 0.78125% 5 - 0.390625% 6 - 0.1953125% 7 - 0.09765625% " SYNTAX Integer32 (0..7) TSlopeThreshold ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The percentage of the shared buffer" SYNTAX Integer32 (0..100) TMaxProbability ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The slope between the Start Average and Max Average" SYNTAX Unsigned32 (0..10|25|50|75|100) TNetworkPolicyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Network policy type" SYNTAX INTEGER { ipInterface(1), port(2) } TDot1PLspExpValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "MPLS Experimental bits or 802.1p priority. This type is used when these are shared. -1 means not set." REFERENCE "." SYNTAX Integer32 (-1 | 0..7) TMplsLspExpProfileValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "MPLS Experimental bits. -1 means not set." REFERENCE "." SYNTAX Integer32 (-1 | 0..7) -- -- mib objects -- tMplsLspExpProfMapTable OBJECT-TYPE SYNTAX SEQUENCE OF TMplsLspExpProfMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all MPLS LSP EXP Profiles." ::= { tnMplsQosObjects 1 } tMplsLspExpProfMapEntry OBJECT-TYPE SYNTAX TMplsLspExpProfMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about one MPLS LSP EXP Profile" INDEX { tnSysSwitchId, tMplsLspExpProfMapIndex } ::= { tMplsLspExpProfMapTable 1 } TMplsLspExpProfMapEntry ::= SEQUENCE { tMplsLspExpProfMapIndex TMplsLspExpProfMapID, tMplsLspExpProfMapRowStatus RowStatus, tMplsLspExpProfMapDescription TItemDescription, tMplsLspExpProfMapLastChanged TimeStamp } tMplsLspExpProfMapIndex OBJECT-TYPE SYNTAX TMplsLspExpProfMapID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMplsLspExpProfMapIndex is used as index for the table." ::= { tMplsLspExpProfMapEntry 1 } tMplsLspExpProfMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this profile entry." ::= { tMplsLspExpProfMapEntry 2 } tMplsLspExpProfMapDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "User-provided description of the policy." DEFVAL { ''H } ::= { tMplsLspExpProfMapEntry 3 } tMplsLspExpProfMapLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tMplsLspExpProfMapTable." ::= { tMplsLspExpProfMapEntry 4 } -- tMplsLspExpProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TMplsLspExpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tnMplsQosObjects 4 } tMplsLspExpProfileEntry OBJECT-TYPE SYNTAX TMplsLspExpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about MPLS LSP EXP mapping." INDEX { tnSysSwitchId, tMplsLspExpProfMapIndex, tMplsLspExpProfileBits } ::= { tMplsLspExpProfileTable 1 } TMplsLspExpProfileEntry ::= SEQUENCE { tMplsLspExpProfileBits TMplsLspExpProfileValue, tMplsLspExpProfileRowStatus RowStatus, tMplsLspExpProfile TProfile, tMplsLspExpProfileLastChanged TimeStamp } tMplsLspExpProfileBits OBJECT-TYPE SYNTAX TMplsLspExpProfileValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS Exp value to use for MPLS traffic." ::= { tMplsLspExpProfileEntry 1 } tMplsLspExpProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this profile entry." ::= { tMplsLspExpProfileEntry 2 } tMplsLspExpProfile OBJECT-TYPE SYNTAX TProfile MAX-ACCESS read-create STATUS current DESCRIPTION "tMplsLspExpProfile specifies the profile to be used for this EXP value as indicated by tMplsLspExpProfileBits." DEFVAL { out } ::= { tMplsLspExpProfileEntry 3 } tMplsLspExpProfileLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tMplsLspExpProfileTable." ::= { tMplsLspExpProfileEntry 4 } -- -- tGlobalMplsLspExpProfile OBJECT-TYPE -- SYNTAX TMplsLspExpProfMapID -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "tGlobalMplsLspExpProfile is used by the LDP packets when the ip -- interface is configured in color aware mode. When the ip interface -- is configured in color blind mode, tGlobalMplsLspExpProfile is not -- applied to LDP packets received on that ip interface" -- DEFVAL { 1 } -- ::= { tnMplsQosObjects 3 } -- -- tLdpLocalFcEnableAdminStatus OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "When tLdpLocalFcEnableAdminStatus is not set, the behavior is like -- SAS release 3.0 here the profile policy will be attached to one qos -- policy. tLdpLocalFcEnableAdminStatus when set to true the system -- opertation status .'tLdpLocalFcEnableOperStatus' will also become 'true', -- -- When tLdpLocalFcEnableAdminStatus is set then more than one profile -- policy can be attached to network policy -- -- When tLdpLocalFcEnableAdminStatus is reset to 'false', the system oper -- 'tLdpLocalFcEnableOperStatus' status would continue to be true until the -- system is reset.tLdpLocalFcEnableAdminStatus will take effect when the -- system is reset, -- " -- DEFVAL { false } -- ::= { tnMplsQosObjects 5 } -- -- tLdpLocalFcEnableOperStatus OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Operational status of how ldp local fc is configured. -- -- After the system init, reseting tLdpLocalFcEnableAdminStatus to false -- from 'true' take effect when the system is reset" -- ::= { tnMplsQosObjects 6 } -- -- access-egress policy table -- tnAccessEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF TAccessEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all Access-egress policies." ::= { tnAccessEgressObjects 1 } tnAccessEgressEntry OBJECT-TYPE SYNTAX TAccessEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Egress QoS information for a particular port" INDEX {tnSysSwitchId, tnAccessEgressIndex } ::= { tnAccessEgressTable 1 } TAccessEgressEntry ::= SEQUENCE { tnAccessEgressIndex TAccessEgressPolicyID, tnAccessEgressRowStatus RowStatus, tnAccessEgressScope TItemScope, tnAccessEgressDescription TItemDescription, tnAccessEgressLastChanged TimeStamp, tnAccessEgressRemark TruthValue, tnAccessEgressRemarkPolicyId TRemarkPolicyID, tnAccessEgressRemarkType INTEGER } tnAccessEgressIndex OBJECT-TYPE SYNTAX TAccessEgressPolicyID MAX-ACCESS not-accessible STATUS current DESCRIPTION "the sap-egress policy ID is used as index for the table." ::= { tnAccessEgressEntry 1 } tnAccessEgressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this policy's entry." ::= { tnAccessEgressEntry 2 } tnAccessEgressScope OBJECT-TYPE SYNTAX TItemScope MAX-ACCESS read-create STATUS current DESCRIPTION "scope of the sap-egress policy." DEFVAL { template } ::= { tnAccessEgressEntry 3 } tnAccessEgressDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "user-supplied description of this sap-egress policy." DEFVAL { ''H } ::= { tnAccessEgressEntry 4 } tnAccessEgressLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tnAccessEgressTable." ::= { tnAccessEgressEntry 5 } tnAccessEgressRemark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if the system will remark the egress packets or not. DEf val is TRUE for STU and FALSE for MTU" DEFVAL { false } ::= { tnAccessEgressEntry 6 } tnAccessEgressRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "Remark Policy Id that be used when remarking is enabled." DEFVAL { 1 } ::= { tnAccessEgressEntry 7 } tnAccessEgressRemarkType OBJECT-TYPE SYNTAX INTEGER { use-dot1p (1), use-dscp (2), all (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies system remark type, tnAccessEgressRemark will be set to true and tnAccessEgressRemarkType will specify the remark type." ::= { tnAccessEgressEntry 8 } -- -- access-egress policy queue table -- tnAccessEgressQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TAccessEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all access-egress policies' queues." ::= { tnAccessEgressObjects 2 } tnAccessEgressQueueEntry OBJECT-TYPE SYNTAX TAccessEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX {tnSysSwitchId, tnAccessEgressIndex, tnAccessEgressQueueIndex } ::= { tnAccessEgressQueueTable 1 } TAccessEgressQueueEntry ::= SEQUENCE { tnAccessEgressQueueIndex TEgressQueueId, tnAccessEgressQueueRowStatus RowStatus, tnAccessEgressQueueCBS TBurstSize, tnAccessEgressQueueMBS TBurstSize, tnAccessEgressQueuePIRAdaptation TAdaptationRule, tnAccessEgressQueueCIRAdaptation TAdaptationRule, tnAccessEgressQueueAdminPIR TPIRRate, tnAccessEgressQueueAdminCIR TCIRRate, tnAccessEgressQueueOperPIR TPIRRate, tnAccessEgressQueueOperCIR TCIRRate, tnAccessEgressQueueLastChanged TimeStamp } tnAccessEgressQueueIndex OBJECT-TYPE SYNTAX TEgressQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted." ::= { tnAccessEgressQueueEntry 1 } tnAccessEgressQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tnAccessEgressQueueEntry 2 } tnAccessEgressQueueCBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of reserved buffer space (in kilo bytes) for the queue." DEFVAL { -1 } ::= { tnAccessEgressQueueEntry 3 } tnAccessEgressQueueMBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum amount of buffer space (in kilo bytes) allowed for the queue." DEFVAL { -1 } ::= { tnAccessEgressQueueEntry 4 } tnAccessEgressQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tnAccessEgressQueueEntry 5 } tnAccessEgressQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tnAccessEgressQueueEntry 6 } tnAccessEgressQueueAdminPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tnAccessEgressQueueEntry 7 } tnAccessEgressQueueAdminCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tnAccessEgressQueueEntry 8 } tnAccessEgressQueueOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative PIR specified by the user." ::= { tnAccessEgressQueueEntry 9 } tnAccessEgressQueueOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules." ::= { tnAccessEgressQueueEntry 10 } tnAccessEgressQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tnAccessEgressQueueTable." ::= { tnAccessEgressQueueEntry 11 } -- -- access-egress policy fc table -- tnAccessEgressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TAccessEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tnAccessEgressObjects 3 } tnAccessEgressFCEntry OBJECT-TYPE SYNTAX TAccessEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular access-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX {tnSysSwitchId, tnAccessEgressIndex, tnAccessEgressFCName } ::= { tnAccessEgressFCTable 1 } TAccessEgressFCEntry ::= SEQUENCE { tnAccessEgressFCName TFCName, tnAccessEgressFCRowStatus RowStatus, tnAccessEgressFCQueue TEgressQueueId, tnAccessEgressFCDot1PInProfile Dot1PPriority, tnAccessEgressFCDot1POutProfile Dot1PPriority, tnAccessEgressFCLastChanged TimeStamp, tnAccessEgressFCDscpInProfile TDSCPNameOrEmpty, tnAccessEgressFCDscpOutProfile TDSCPNameOrEmpty } tnAccessEgressFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "forwarding class name." ::= { tnAccessEgressFCEntry 1 } tnAccessEgressFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status." ::= { tnAccessEgressFCEntry 2 } tnAccessEgressFCQueue OBJECT-TYPE SYNTAX TEgressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The queue to use for packets in this forwarding class. No FC can map to the same queue being used by 'premium' class. You must specify a valid queue-id before setting the row status to active." ::= { tnAccessEgressFCEntry 3 } tnAccessEgressFCDot1PInProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "the Dot1p to use for in-profile traffic." DEFVAL { -1 } ::= { tnAccessEgressFCEntry 4 } tnAccessEgressFCDot1POutProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "the Dot1p to use for in-profile traffic." DEFVAL { -1 } ::= { tnAccessEgressFCEntry 5 } tnAccessEgressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tnAccessEgressFCTable." ::= { tnAccessEgressFCEntry 6 } tnAccessEgressFCDscpInProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for in-profile traffic." DEFVAL { ''H } ::= { tnAccessEgressFCEntry 7 } tnAccessEgressFCDscpOutProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for out-profile traffic." DEFVAL { ''H } ::= { tnAccessEgressFCEntry 8 } -- -- Dummy Scalars -- tnAccessEgressScalar1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item." ::= { tnAccessEgressObjects 101 } tnAccessEgressScalar2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { tnAccessEgressObjects 102 } -- -- sap-ingress meter table -- tnSapIngressMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all sap-ingress policies' Meters." ::= { tnSASSapIngressObjects 1 } tnSapIngressMeterEntry OBJECT-TYPE SYNTAX TSapIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular meter for a sap-ingress policy. Meter (1) is the used as a default for unicast and meter (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user." INDEX {tnSysSwitchId, tnSapIngressIndex, tnSapIngressMeter } ::= { tnSapIngressMeterTable 1 } TSapIngressMeterEntry ::= SEQUENCE { tnSapIngressMeter TSapIngressMeterId, tnSapIngressMeterRowStatus RowStatus, tnSapIngressMeterMCast TruthValue, -- tnSapIngressMeterCBS TIngressBurstSize, -- tnSapIngressMeterMBS TIngressBurstSize, tnSapIngressMeterPIRAdaptation TAdaptationRule, tnSapIngressMeterCIRAdaptation TAdaptationRule, tnSapIngressMeterAdminPIR TIngressPIRRate, tnSapIngressMeterAdminCIR TIngressCIRRate, tnSapIngressMeterOperPIR TPIRRate, tnSapIngressMeterOperCIR TCIRRate, tnSapIngressMeterLastChanged TimeStamp, tnSapIngressMeterMode TMeterMode, tnSapIngressMeterRateMode TMeterRateMode, tnSapIngressMeterAdminCBS TIngressBurstSize, tnSapIngressMeterAdminMBS TIngressBurstSize, tnSapIngressMeterOperCBS TIngressBurstSize, tnSapIngressMeterOperMBS TIngressBurstSize } tnSapIngressMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Meter ID is used as the secondary index to the table entry." ::= { tnSapIngressMeterEntry 1 } tnSapIngressMeterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tnSapIngressMeterEntry 2 } tnSapIngressMeterMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this is a multicast meter or not." DEFVAL { false } ::= { tnSapIngressMeterEntry 8 } -- tnSapIngressMeterCBS OBJECT-TYPE -- SYNTAX TIngressBurstSize -- MAX-ACCESS read-create -- STATUS obsolete -- DESCRIPTION -- "The amount of committed burst size (in kilo bits) for the meter." -- DEFVAL { -1 } -- ::= { tnSapIngressMeterEntry 10 } -- -- tnSapIngressMeterMBS OBJECT-TYPE -- SYNTAX TIngressBurstSize -- MAX-ACCESS read-create -- STATUS obsolete -- DESCRIPTION -- "The maximum amount of burst size (in kilo bits) allowed for the -- meter." -- DEFVAL { -1 } -- ::= { tnSapIngressMeterEntry 11 } tnSapIngressMeterCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tnSapIngressMeterEntry 14 } tnSapIngressMeterPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tnSapIngressMeterEntry 13 } tnSapIngressMeterAdminPIR OBJECT-TYPE SYNTAX TIngressPIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tnSapIngressMeterEntry 15 } tnSapIngressMeterAdminCIR OBJECT-TYPE SYNTAX TIngressCIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tnSapIngressMeterEntry 16 } tnSapIngressMeterOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules." ::= { tnSapIngressMeterEntry 17 } tnSapIngressMeterOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules." ::= { tnSapIngressMeterEntry 18 } tnSapIngressMeterLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row in tnSapIngressMeterTable." ::= { tnSapIngressMeterEntry 19 } tnSapIngressMeterMode OBJECT-TYPE SYNTAX TMeterMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object is not used on SAS platform currently" DEFVAL { priority } ::= { tnSapIngressMeterEntry 21 } tnSapIngressMeterRateMode OBJECT-TYPE SYNTAX TMeterRateMode MAX-ACCESS read-create STATUS current DESCRIPTION "Sap Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime." DEFVAL { trtcm1 } ::= { tnSapIngressMeterEntry 22 } tnSapIngressMeterAdminCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter." DEFVAL { -1 } ::= { tnSapIngressMeterEntry 23 } tnSapIngressMeterAdminMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter." DEFVAL { -1 } ::= { tnSapIngressMeterEntry 24 } tnSapIngressMeterOperCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CBS value from the administrative CBS value" ::= { tnSapIngressMeterEntry 25 } tnSapIngressMeterOperMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the MBS value from the administrative MBS value" ::= { tnSapIngressMeterEntry 26 } tnNetworkIngressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular forwarding class traffic into the specified meter." ::= { tnSASNetworkIngressObjects 1 } tnNetworkIngressFCEntry OBJECT-TYPE SYNTAX TNetworkIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular network-ingress policy's forwarding class mappings to meter. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX {tnSysSwitchId, tnNetworkPolicyIndex, tnNetworkIngressFCName } ::= { tnNetworkIngressFCTable 1 } TNetworkIngressFCEntry ::= SEQUENCE { tnNetworkIngressFCName TNamedItem, tnNetworkIngressFCRowStatus RowStatus, tnNetworkIngressFCMeter TNetworkIngressMeterId, tnNetworkIngressFCMCastMeter TNetworkIngressMeterId, tnNetworkIngressFCLastChanged TimeStamp } tnNetworkIngressFCName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tnNetworkIngressFCName specifies the forwarding class for which this mapping is defined." ::= { tnNetworkIngressFCEntry 1 } tnNetworkIngressFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this Entry." ::= { tnNetworkIngressFCEntry 2 } tnNetworkIngressFCMeter OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meters should be used." ::= { tnNetworkIngressFCEntry 3 } tnNetworkIngressFCMCastMeter OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tnNetworkIngressFCEntry 4 } tnNetworkIngressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tnNetworkIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified." ::= { tnNetworkIngressFCEntry 5 } tnNetworkIngressMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all network policies' meters." ::= { tnSASNetworkIngressObjects 2 } tnNetworkIngressMeterEntry OBJECT-TYPE SYNTAX TNetworkIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular meter for a network policy. Meter (1) is the used as a default for unicast and meter (9) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user." INDEX {tnSysSwitchId, tnNetworkPolicyIndex, tnNetworkIngressMeterIndex } ::= { tnNetworkIngressMeterTable 1 } TNetworkIngressMeterEntry ::= SEQUENCE { tnNetworkIngressMeterIndex TNetworkIngressMeterId, tnNetworkIngressMeterRowStatus RowStatus, -- tnNetworkIngressMeterCBS TIngressBurstSize, -- tnNetworkIngressMeterMBS TIngressBurstSize, tnNetworkIngressMeterCIRAdaptation TAdaptationRule, tnNetworkIngressMeterPIRAdaptation TAdaptationRule, tnNetworkIngressMeterAdminPIR TIngressPIRRate, tnNetworkIngressMeterAdminCIR TIngressCIRRate, tnNetworkIngressMeterOperPIR TPIRRate, tnNetworkIngressMeterOperCIR TCIRRate, tnNetworkIngressMeterLastChanged TimeStamp, tnNetworkIngressMeterMode TMeterMode, tnNetworkIngressMeterMCast TruthValue, tnNetworkIngressMeterRateMode TMeterRateMode, tnNetworkIngressMeterAdminCBS TIngressBurstSize, tnNetworkIngressMeterAdminMBS TIngressBurstSize, tnNetworkIngressMeterOperCBS TIngressBurstSize, tnNetworkIngressMeterOperMBS TIngressBurstSize } tnNetworkIngressMeterIndex OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Meter ID is used as the secondary index to the table entry." ::= { tnNetworkIngressMeterEntry 1 } tnNetworkIngressMeterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tnNetworkIngressMeterEntry 2 } -- tnNetworkIngressMeterCBS OBJECT-TYPE -- SYNTAX TIngressBurstSize -- MAX-ACCESS read-create -- STATUS obsolete -- DESCRIPTION -- "The amount of committed burst size (in kilo bits) for the meter." -- DEFVAL { -1 } -- ::= { tnNetworkIngressMeterEntry 3 } -- -- tnNetworkIngressMeterMBS OBJECT-TYPE -- SYNTAX TIngressBurstSize -- MAX-ACCESS read-create -- STATUS obsolete -- DESCRIPTION -- "The maximum amount of burst size (in kilo bits) allowed for the -- meter." -- DEFVAL { -1 } -- ::= { tnNetworkIngressMeterEntry 4 } tnNetworkIngressMeterCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tnNetworkIngressMeterEntry 5 } tnNetworkIngressMeterPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tnNetworkIngressMeterEntry 6 } tnNetworkIngressMeterAdminPIR OBJECT-TYPE SYNTAX TIngressPIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tnNetworkIngressMeterEntry 7 } tnNetworkIngressMeterAdminCIR OBJECT-TYPE SYNTAX TIngressCIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tnNetworkIngressMeterEntry 8 } tnNetworkIngressMeterOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules." ::= { tnNetworkIngressMeterEntry 9 } tnNetworkIngressMeterOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules." ::= { tnNetworkIngressMeterEntry 10 } tnNetworkIngressMeterLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row." ::= { tnNetworkIngressMeterEntry 11 } tnNetworkIngressMeterMode OBJECT-TYPE SYNTAX TMeterMode MAX-ACCESS read-create STATUS current DESCRIPTION "Network Ingress Meter Mode" DEFVAL { priority } ::= { tnNetworkIngressMeterEntry 12 } tnNetworkIngressMeterMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this is a multicast meter or not." DEFVAL { false } ::= { tnNetworkIngressMeterEntry 13 } tnNetworkIngressMeterRateMode OBJECT-TYPE SYNTAX TMeterRateMode MAX-ACCESS read-create STATUS current DESCRIPTION " Network Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime." DEFVAL { trtcm1 } ::= { tnNetworkIngressMeterEntry 14 } tnNetworkIngressMeterAdminCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter." DEFVAL { -1 } ::= { tnNetworkIngressMeterEntry 15 } tnNetworkIngressMeterAdminMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter." DEFVAL { -1 } ::= { tnNetworkIngressMeterEntry 16 } tnNetworkIngressMeterOperCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CBS value from the administrative CBS value" ::= { tnNetworkIngressMeterEntry 17 } tnNetworkIngressMeterOperMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the MBS value from the administrative MBS value" ::= { tnNetworkIngressMeterEntry 26 } -- -- Dummy Scalars -- tnSASNetworkIngressScalar1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item." ::= { tnSASNetworkIngressObjects 101 } tnSASNetworkIngressScalar2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { tnSASNetworkIngressObjects 102 } tnSASSlopePolicyExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSasSlopePolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Table. Additions for sas platform" ::= { tnSASSlopeObjects 1 } tnSASSlopePolicyExtnEntry OBJECT-TYPE SYNTAX TSasSlopePolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Entry additions for sas platform." AUGMENTS { tnSlopePolicyEntry } ::= { tnSASSlopePolicyExtnTable 1 } TSasSlopePolicyExtnEntry ::= SEQUENCE { tnSlopeHiQueue1DropRate TSlopeDropRate, tnSlopeHiQueue2DropRate TSlopeDropRate, tnSlopeHiQueue3DropRate TSlopeDropRate, tnSlopeHiQueue4DropRate TSlopeDropRate, tnSlopeHiQueue5DropRate TSlopeDropRate, tnSlopeHiQueue6DropRate TSlopeDropRate, tnSlopeHiQueue7DropRate TSlopeDropRate, tnSlopeHiQueue8DropRate TSlopeDropRate, tnSlopeLoQueue1DropRate TSlopeDropRate, tnSlopeLoQueue2DropRate TSlopeDropRate, tnSlopeLoQueue3DropRate TSlopeDropRate, tnSlopeLoQueue4DropRate TSlopeDropRate, tnSlopeLoQueue5DropRate TSlopeDropRate, tnSlopeLoQueue6DropRate TSlopeDropRate, tnSlopeLoQueue7DropRate TSlopeDropRate, tnSlopeLoQueue8DropRate TSlopeDropRate, tnSlopeHiStartThreshold TSlopeThreshold, tnSlopeLoStartThreshold TSlopeThreshold } tnSlopeHiQueue1DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 1 } tnSlopeHiQueue2DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 2 } tnSlopeHiQueue3DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 3 } tnSlopeHiQueue4DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 4 } tnSlopeHiQueue5DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 5 } tnSlopeHiQueue6DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 6 } tnSlopeHiQueue7DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 7 } tnSlopeHiQueue8DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tnSASSlopePolicyExtnEntry 8 } tnSlopeLoQueue1DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 9 } tnSlopeLoQueue2DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 10 } tnSlopeLoQueue3DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 11 } tnSlopeLoQueue4DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 12 } tnSlopeLoQueue5DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 13 } tnSlopeLoQueue6DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 14 } tnSlopeLoQueue7DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 15 } tnSlopeLoQueue8DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tnSASSlopePolicyExtnEntry 16 } tnSlopeHiStartThreshold OBJECT-TYPE SYNTAX TSlopeThreshold MAX-ACCESS read-create STATUS current DESCRIPTION "High slope Start Threshold.This object implies that once the shared buffer utilization reaches the start-threshold level then high-priority packets egressing out from a particular queue would be dropped at configured drop rate." DEFVAL { 75 } ::= { tnSASSlopePolicyExtnEntry 17 } tnSlopeLoStartThreshold OBJECT-TYPE SYNTAX TSlopeThreshold MAX-ACCESS read-create STATUS current DESCRIPTION "Low slope Start Threshold.This implies that once the shared buffer utilization reaches the start-threshold level then low-priority packets egressing out from a particular queue would be dropped at configured drop rate." DEFVAL { 50 } ::= { tnSASSlopePolicyExtnEntry 18 } tnSlopePolicyQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TQueueSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Per Queue Per Port additions for SAS-M platform. In SAS-M there are three slopes associated with a queue. One slope for Tcp Green packets, one for Tcp Yellow packets and one for Non Tcp Packets(both green and yellow packets). Each slope in turn can have four parameters defining its behavior" ::= { tnSASSlopeObjects 2 } tnSlopePolicyQueueEntry OBJECT-TYPE SYNTAX TQueueSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { tnSysSwitchId, tnSlopePolicy, tnSlopePolicyQueueId } ::= { tnSlopePolicyQueueTable 1 } TQueueSlopePolicyEntry ::= SEQUENCE { tnSlopePolicyQueueId TQueueId, tnSlopePolicyQueueRowStatus RowStatus, tnSlopePolicyQueueLastChanged TimeStamp, tnSlopePolicyQueueHiAdminStatus INTEGER, tnSlopePolicyQueueHiStartAverage Unsigned32, tnSlopePolicyQueueHiMaxAverage Unsigned32, tnSlopePolicyQueueHiMaxProbability TMaxProbability, tnSlopePolicyQueueLoAdminStatus INTEGER, tnSlopePolicyQueueLoStartAverage Unsigned32, tnSlopePolicyQueueLoMaxAverage Unsigned32, tnSlopePolicyQueueLoMaxProbability TMaxProbability, tnSlopePolicyQueueNonTcpAdminStatus INTEGER, tnSlopePolicyQueueNonTcpStartAverage Unsigned32, tnSlopePolicyQueueNonTcpMaxAverage Unsigned32, tnSlopePolicyQueueNonTcpMaxProbability TMaxProbability, tnSlopePolicyQueueTimeAvgFactor Unsigned32 } tnSlopePolicyQueueId OBJECT-TYPE SYNTAX TQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue for which slope policy is being defined" ::= { tnSlopePolicyQueueEntry 1 } tnSlopePolicyQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tnSlopePolicyQueueEntry 2 } tnSlopePolicyQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row." ::= { tnSlopePolicyQueueEntry 3 } tnSlopePolicyQueueHiAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tnSlopePolicyQueueHiAdminStatus specifies the admin state for the queue's high profile (Tcp Green Packets )slope. If the tnSlopePolicyQueueHiAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tnSlopePolicyQueueEntry 4 } tnSlopePolicyQueueHiStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 70 } ::= { tnSlopePolicyQueueEntry 5 } tnSlopePolicyQueueHiMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 90 } ::= { tnSlopePolicyQueueEntry 6 } tnSlopePolicyQueueHiMaxProbability OBJECT-TYPE SYNTAX TMaxProbability MAX-ACCESS read-create STATUS current DESCRIPTION "High Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tnSlopePolicyQueueEntry 7 } tnSlopePolicyQueueLoAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tnSlopePolicyQueueLoAdminStatus specifies the admin state for the queue's low profile (Tcp Yellow Packets )slope. If the tnSlopePolicyQueueLoAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tnSlopePolicyQueueEntry 8 } tnSlopePolicyQueueLoStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 50 } ::= { tnSlopePolicyQueueEntry 9 } tnSlopePolicyQueueLoMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 75 } ::= { tnSlopePolicyQueueEntry 10 } tnSlopePolicyQueueLoMaxProbability OBJECT-TYPE SYNTAX TMaxProbability MAX-ACCESS read-create STATUS current DESCRIPTION "Low Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tnSlopePolicyQueueEntry 11 } tnSlopePolicyQueueNonTcpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tnSlopePolicyQueueNonTcpAdminStatus specifies the admin state for the queue's non tcp profile (Non Tcp Packets )slope. If the tnSlopePolicyQueueNonTcpAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tnSlopePolicyQueueEntry 12 } tnSlopePolicyQueueNonTcpStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 50 } ::= { tnSlopePolicyQueueEntry 13 } tnSlopePolicyQueueNonTcpMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 75 } ::= { tnSlopePolicyQueueEntry 14 } tnSlopePolicyQueueNonTcpMaxProbability OBJECT-TYPE SYNTAX TMaxProbability MAX-ACCESS read-create STATUS current DESCRIPTION "Non Tcp Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tnSlopePolicyQueueEntry 15 } tnSlopePolicyQueueTimeAvgFactor OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization." DEFVAL { 7 } ::= { tnSlopePolicyQueueEntry 16 } -- -- Dummy Scalars -- tnSASSlopeScalar1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item." ::= { tnSASSlopeObjects 101 } tnSASSlopeScalar2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { tnSASSlopeObjects 102 } tnSASSapIngressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSasSapIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular forwarding class traffic into the specified meter." ::= { tnSASSapIngressObjects 2 } tnSASSapIngressFCEntry OBJECT-TYPE SYNTAX TSasSapIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-ingress policy's forwarding class mappings to meters." AUGMENTS { tnSapIngressFCEntry } ::= { tnSASSapIngressFCTable 1 } TSasSapIngressFCEntry ::= SEQUENCE { tnSapIngressFCMeter TSapIngressMeterId, tnSapIngressFCMCastMeter TSapIngressMeterId, tnSapIngressFCBCastMeter TSapIngressMeterId, tnSapIngressFCUnknownMeter TSapIngressMeterId } tnSapIngressFCMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meter should be used." ::= { tnSASSapIngressFCEntry 1 } tnSapIngressFCMCastMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tnSASSapIngressFCEntry 2 } tnSapIngressFCBCastMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific broadcast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tnSASSapIngressFCEntry 3 } tnSapIngressFCUnknownMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific unknown destination meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tnSASSapIngressFCEntry 4 } tnSASPortSchedulerPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSasPortSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnSASPortSchedulerPlcyTable has an entry for each port scheduler configured on this system." ::= { tnSASSchedulerObjects 1 } tnSASPortSchedulerPlcyEntry OBJECT-TYPE SYNTAX TSasPortSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular port scheduler. Entries are created and deleted by the user." AUGMENTS { tnPortSchedulerPlcyEntry } ::= { tnSASPortSchedulerPlcyTable 1 } TSasPortSchedulerPlcyEntry ::= SEQUENCE { tnPortSchedulerPlcyMode TPlcyMode, tnPortSchedulerPlcyQuanta TPlcyQuanta, tnPortSchedulerPlcyQueue1Weight TQWeight, tnPortSchedulerPlcyQueue2Weight TQWeight, tnPortSchedulerPlcyQueue3Weight TQWeight, tnPortSchedulerPlcyQueue4Weight TQWeight, tnPortSchedulerPlcyQueue5Weight TQWeight, tnPortSchedulerPlcyQueue6Weight TQWeight, tnPortSchedulerPlcyQueue7Weight TQWeight, tnPortSchedulerPlcyQueue8Weight TQWeight } tnPortSchedulerPlcyMode OBJECT-TYPE SYNTAX TPlcyMode MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Mode" DEFVAL { strict } ::= { tnSASPortSchedulerPlcyEntry 1 } tnPortSchedulerPlcyQuanta OBJECT-TYPE SYNTAX TPlcyQuanta MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Quanta" DEFVAL { 0 } ::= { tnSASPortSchedulerPlcyEntry 2 } tnPortSchedulerPlcyQueue1Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 1 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 3 } tnPortSchedulerPlcyQueue2Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 2 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 4 } tnPortSchedulerPlcyQueue3Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 3 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 5 } tnPortSchedulerPlcyQueue4Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 4 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 6 } tnPortSchedulerPlcyQueue5Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 5 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 7 } tnPortSchedulerPlcyQueue6Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 6 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 8 } tnPortSchedulerPlcyQueue7Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 7 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 9 } tnPortSchedulerPlcyQueue8Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 8 Weight" DEFVAL { 1 } ::= { tnSASPortSchedulerPlcyEntry 10 } -- ---------------------------------------- -- port scheduler policies for preempt Table -- ---------------------------------------- tnSASPortPreemptSchedulerPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF TnSasPortPreemptSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnSASPortPreemptSchedulerPlcyTable has an entry for each port scheduler configured on this system." ::= { tnSASSchedulerObjects 2 } tnSASPortPreemptSchedulerPlcyEntry OBJECT-TYPE SYNTAX TnSasPortPreemptSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a Preempt mode for particular port scheduler. Entries are created and deleted by the user." INDEX { tnSysSwitchId, tnPortSchedulerPlcyName } ::= { tnSASPortPreemptSchedulerPlcyTable 1 } TnSasPortPreemptSchedulerPlcyEntry ::= SEQUENCE { tnPortSchedulerPlcyQueue1Preempt TQPreempt, tnPortSchedulerPlcyQueue2Preempt TQPreempt, tnPortSchedulerPlcyQueue3Preempt TQPreempt, tnPortSchedulerPlcyQueue4Preempt TQPreempt, tnPortSchedulerPlcyQueue5Preempt TQPreempt, tnPortSchedulerPlcyQueue6Preempt TQPreempt, tnPortSchedulerPlcyQueue7Preempt TQPreempt, tnPortSchedulerPlcyQueue8Preempt TQPreempt } tnPortSchedulerPlcyQueue1Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 1 Preempt" DEFVAL { 0} ::= { tnSASPortPreemptSchedulerPlcyEntry 1 } tnPortSchedulerPlcyQueue2Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 2 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 2 } tnPortSchedulerPlcyQueue3Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 3 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 3 } tnPortSchedulerPlcyQueue4Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 4 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 4 } tnPortSchedulerPlcyQueue5Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 5 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 5 } tnPortSchedulerPlcyQueue6Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 6 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 6 } tnPortSchedulerPlcyQueue7Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 7 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 7 } tnPortSchedulerPlcyQueue8Preempt OBJECT-TYPE SYNTAX TQPreempt MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 8 Preempt" DEFVAL { 0 } ::= { tnSASPortPreemptSchedulerPlcyEntry 8 } -- ---------------------------------------- -- Ingress QoS Meter SAP Statistics Table -- ---------------------------------------- tnSapIngQosMeterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosMeterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS meter SAP statistics." ::= { tnSASSapIngressObjects 3 } tnSapIngQosMeterStatsEntry OBJECT-TYPE SYNTAX SapIngQosMeterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress statistics about a specific SAP's QoS meter." INDEX { tnSysSwitchId, tnSvcId, tnSapPortId, tnSapEncapValue, tnSapIngQosMeterId } ::= { tnSapIngQosMeterStatsTable 1 } SapIngQosMeterStatsEntry ::= SEQUENCE { tnSapIngQosMeterId TSapIngressMeterId, tnSapIngQosMeterStatsForwardedInProfPackets Counter64, tnSapIngQosMeterStatsForwardedOutProfPackets Counter64, tnSapIngQosMeterStatsForwardedInProfOctets Counter64, tnSapIngQosMeterStatsForwardedOutProfOctets Counter64, tnSapIngQosMeterStatsForwardedPackets Counter64, tnSapIngQosMeterStatsForwardedOctets Counter64, tnSapIngQosMeterStatsDroppedPackets Counter64, tnSapIngQosMeterStatsDroppedOctets Counter64 } tnSapIngQosMeterId OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of the ingress QoS meter of this SAP." ::= { tnSapIngQosMeterStatsEntry 1 } tnSapIngQosMeterStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 10 } tnSapIngQosMeterStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 11 } tnSapIngQosMeterStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 12 } tnSapIngQosMeterStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 13 } tnSapIngQosMeterStatsForwardedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets forwarded by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 14 } tnSapIngQosMeterStatsForwardedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets forwarded by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 15 } tnSapIngQosMeterStatsDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 16 } tnSapIngQosMeterStatsDroppedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets dropped by the ingress Qchip." ::= { tnSapIngQosMeterStatsEntry 17 } -- ---------------------------------------- -- QoS Frame Based Account Table -- ---------------------------------------- tnQosFrameBasedAccntTable OBJECT-TYPE SYNTAX SEQUENCE OF TnQosFrameBasedAccntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in this table indicates whether Frame based accounting is enabled in the ingress and egress directions." ::= { tnQosFrameBasedAccntObjects 3 } tnQosFrameBasedAccntEntry OBJECT-TYPE SYNTAX TnQosFrameBasedAccntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry indicating the ingress or egress state for frame based accounting." INDEX { tnSysSwitchId } ::= { tnQosFrameBasedAccntTable 1 } TnQosFrameBasedAccntEntry ::= SEQUENCE { tnQosIngressFrameBasedAccnt TruthValue, tnQosEgressFrameBasedAccnt TruthValue } tnQosIngressFrameBasedAccnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable frame based accounting for all the ingress meters in use by the pack. When this is enabled the ingress meters account for the IFG (12 bytes) + SFD (8 bytes) overhead associated with Ethernet frame." DEFVAL { false } ::= { tnQosFrameBasedAccntEntry 1 } tnQosEgressFrameBasedAccnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable frame based accounting for all the egress queue shapers and the port egress rate shaper in use by the pack. When this is enabled the shapers account for the IFG (12 bytes) + SFD (8 bytes) overhead associated with Ethernet frame." DEFVAL { false } ::= { tnQosFrameBasedAccntEntry 2 } tnSapIngressExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { tnSASSapIngressObjects 4 } tnSapIngressExtnEntry OBJECT-TYPE SYNTAX TSapIngressExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." AUGMENTS { tnSapIngressEntry } ::= { tnSapIngressExtnTable 1 } TSapIngressExtnEntry ::= SEQUENCE { tnSapIngressNumQosClassifiers Unsigned32, -- tnSapIngressQosClassifiersUsed Unsigned32, -- tnSapIngressQosMetersUsed Unsigned32, tnSapIngressQosClassifiersRequiredInVpls Unsigned32, tnSapIngressQosClassifiersRequiredInEpipe Unsigned32, tnSapIngressQosMetersRequiredInVpls Unsigned32, tnSapIngressQosMetersRequiredInEpipe Unsigned32, tnSapIngressIPCriteriaMatch INTEGER, tnSapIngressMacCriteriaMatch INTEGER, tnSapIngressIPv6CriteriaEnable TruthValue, tnSapIngressIPv6CriteriaMatch INTEGER } tnSapIngressNumQosClassifiers OBJECT-TYPE SYNTAX Unsigned32 (2..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of ingress QoS classifiers to be allocated to the SAP on which this policy is applied. The number of QoS classifiers required by a SAP ingress QoS policy should be less than or equal to its tnSapIngressNumQosClassifiers. The number of Meters required by a SAP ingress QoS policy should be less than or equal to half the number of tnSapIngressNumQosClassifiers." DEFVAL { 2 } ::= { tnSapIngressExtnEntry 1 } -- tnSapIngressQosClassifiersUsed OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS obsolete -- DESCRIPTION -- "This value indicates the number of ingress QoS classifiers -- required when this policy is applied on a SAP. This value is -- calculated based on the number of classifiers required for a -- VPLS SAP." -- ::= { tnSapIngressExtnEntry 2 } -- -- tnSapIngressQosMetersUsed OBJECT-TYPE -- SYNTAX Unsigned32 -- MAX-ACCESS read-only -- STATUS obsolete -- DESCRIPTION -- "This value indicates the number of ingress QoS meters required -- when this policy is applied on a SAP. This value is calculated -- based on the number of meters required for a VPLS SAP." -- ::= { tnSapIngressExtnEntry 3 } tnSapIngressQosClassifiersRequiredInVpls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a VPLS SAP." ::= { tnSapIngressExtnEntry 4 } tnSapIngressQosClassifiersRequiredInEpipe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a EPIPE SAP." ::= { tnSapIngressExtnEntry 5 } tnSapIngressQosMetersRequiredInVpls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a VPLS SAP." ::= { tnSapIngressExtnEntry 6 } tnSapIngressQosMetersRequiredInEpipe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a EPIPE SAP." ::= { tnSapIngressExtnEntry 7 } tnSapIngressIPCriteriaMatch OBJECT-TYPE SYNTAX INTEGER { any (1), dscp-only(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria as 'any' or 'dscp-only' based on ip. The default value is 'dscp-only' " DEFVAL { dscp-only } ::= { tnSapIngressExtnEntry 8 } tnSapIngressMacCriteriaMatch OBJECT-TYPE SYNTAX INTEGER { any (1), dot1p-only(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria as 'any' or 'dot1p-only' based on Mac Address. The default value is 'any' " DEFVAL { any } ::= { tnSapIngressExtnEntry 9 } tnSapIngressIPv6CriteriaEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "tnSapIngressIPv6CriteriaEnable is a boolean flag which allows/disallows configuring match criteria based on ipv6 address" DEFVAL { false } ::= { tnSapIngressExtnEntry 10 } tnSapIngressIPv6CriteriaMatch OBJECT-TYPE SYNTAX INTEGER { any (1), dscp-only(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria as 'any' or 'dscp-only' based on ipv6. The default value is 'dscp-only' " DEFVAL { dscp-only } ::= { tnSapIngressExtnEntry 11 } -- -- Dummy Scalars -- tnSASSapIngressScalar1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item." ::= { tnSASSapIngressObjects 101 } tnSASSapIngressScalar2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { tnSASSapIngressObjects 102 } tnNetworkPolicyExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkPolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tnNetworkPolicyTable" ::= { tnSASNetworkObjects 1 } tnNetworkPolicyExtnEntry OBJECT-TYPE SYNTAX TNetworkPolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." AUGMENTS { tnNetworkPolicyEntry } ::= { tnNetworkPolicyExtnTable 1 } TNetworkPolicyExtnEntry ::= SEQUENCE { tnNetworkPolicyType TNetworkPolicyType, tnNetworkPolicyRemarkPolicyId TRemarkPolicyID, tnNetworkIngressMeterColorMode INTEGER, tnNetworkIngressMplsLspExpProfile TMplsLspExpProfMapID, tnNetworkEgressRemarkType INTEGER } tnNetworkPolicyType OBJECT-TYPE SYNTAX TNetworkPolicyType MAX-ACCESS read-create STATUS current DESCRIPTION "Network policy Type determines the point of attachment of the network qos policy. Network policy with 'ipInterface' type can be attached to ip interface and 'port' type can be attached to physical port" DEFVAL { ipInterface } ::= { tnNetworkPolicyExtnEntry 1 } tnNetworkPolicyRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "Remark Policy Id that be used." DEFVAL { 2 } ::= { tnNetworkPolicyExtnEntry 2 } tnNetworkIngressMeterColorMode OBJECT-TYPE SYNTAX INTEGER { color-aware (1), color-blind (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tnNetworkIngressMeterColorMode indicates whether the ip interface is color-aware or color-blind. By default every ip interface is color-aware" DEFVAL { color-aware } ::= { tnNetworkPolicyExtnEntry 3 } tnNetworkIngressMplsLspExpProfile OBJECT-TYPE SYNTAX TMplsLspExpProfMapID MAX-ACCESS read-write STATUS current DESCRIPTION "tnNetworkIngressMplsLspExpProfile attaches the MPLS LSP EXP Profile to this network policy." DEFVAL { 1 } ::= { tnNetworkPolicyExtnEntry 4 } tnNetworkEgressRemarkType OBJECT-TYPE SYNTAX INTEGER { use-dot1p (1), use-dscp (2), all (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies system remark type, tnNetworkPolicyEgressRemark will be set to true and tnNetworkEgressRemarkType will specify the remark type." ::= { tnNetworkPolicyExtnEntry 5 } -- tnNetworkQueueExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tnNetworkQueueTable" ::= { tnSASNetworkObjects 2 } tnNetworkQueueExtnEntry OBJECT-TYPE SYNTAX TNetworkQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." AUGMENTS { tnNetworkQueueEntry } ::= { tnNetworkQueueExtnTable 1 } TNetworkQueueExtnEntry ::= SEQUENCE { tnNetworkQueuePolicyName TNamedItem } tnNetworkQueuePolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "NetworkQueuePolicyName determines the queue management policy attached to this network queue." DEFVAL { "default" } ::= { tnNetworkQueueExtnEntry 1 } -- tnQueueMgmtPolicyTable OBJECT-TYPE -- SYNTAX SEQUENCE OF TQueueMgmtPolicyEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Queue Management Policy definition for 7210-X platform." -- ::= { tnSASQueueMgmtObjects 1 } -- -- tnQueueMgmtPolicyEntry OBJECT-TYPE -- SYNTAX TQueueMgmtPolicyEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "." -- INDEX { tnSysSwitchId, tnQueueMgmtPolicyName } -- ::= { tnQueueMgmtPolicyTable 1 } -- -- TQueueMgmtPolicyEntry ::= SEQUENCE -- { -- tnQueueMgmtPolicyName TNamedItem, -- tnQueueMgmtPolicyRowStatus RowStatus, -- tnQueueMgmtPolicyLastChanged TimeStamp, -- tnQueueMgmtPolicyDescription TItemDescription, -- tnQueueMgmtPolicyHiAdminStatus INTEGER, -- tnQueueMgmtPolicyHiStartAverage Unsigned32, -- tnQueueMgmtPolicyHiMaxAverage Unsigned32, -- tnQueueMgmtPolicyHiMaxProbability Unsigned32, -- tnQueueMgmtPolicyLoAdminStatus INTEGER, -- tnQueueMgmtPolicyLoStartAverage Unsigned32, -- tnQueueMgmtPolicyLoMaxAverage Unsigned32, -- tnQueueMgmtPolicyLoMaxProbability Unsigned32, -- tnQueueMgmtPolicyCBS INTEGER, -- tnQueueMgmtPolicyMBS INTEGER, -- tnQueueMgmtPolicyTimeAvgFactor Unsigned32, -- tnQueueMgmtPolicyScope TItemScope -- } -- -- tnQueueMgmtPolicyName OBJECT-TYPE -- SYNTAX TNamedItem -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The value of tnQueueMgmtPolicyName specifies the name of the Queue -- Management policy." -- ::= { tnQueueMgmtPolicyEntry 1 } -- -- tnQueueMgmtPolicyRowStatus OBJECT-TYPE -- SYNTAX RowStatus -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Row Status of the entry. This allows creation/deletion of rows in this -- table." -- ::= { tnQueueMgmtPolicyEntry 2 } -- -- tnQueueMgmtPolicyLastChanged OBJECT-TYPE -- SYNTAX TimeStamp -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Timestamp of last change to this row." -- ::= { tnQueueMgmtPolicyEntry 3 } -- -- tnQueueMgmtPolicyDescription OBJECT-TYPE -- SYNTAX TItemDescription -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "User-provided description of the policy." -- DEFVAL { ''H } -- ::= { tnQueueMgmtPolicyEntry 4 } -- -- tnQueueMgmtPolicyHiAdminStatus OBJECT-TYPE -- SYNTAX INTEGER { -- up (1), -- down(2) -- } -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "tnQueueMgmtPolicyHiAdminStatus specifies the admin state for the queue's -- high profile (Green Packets) slope. If the tnQueueMgmtPolicyHiAdminStatus -- is set to 'down',the slope is inactive." -- DEFVAL { down } -- ::= { tnQueueMgmtPolicyEntry 5 } -- -- tnQueueMgmtPolicyHiStartAverage OBJECT-TYPE -- SYNTAX Unsigned32 (0..100) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The percentage of the buffer utilized after which the drop probability -- starts to rise above 0." -- DEFVAL { 70 } -- ::= { tnQueueMgmtPolicyEntry 6 } -- -- tnQueueMgmtPolicyHiMaxAverage OBJECT-TYPE -- SYNTAX Unsigned32 (0..100) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The percentage of the buffer utilized after which the drop probability -- is 100 percent. This implies that all packets beyond this point will be -- dropped." -- DEFVAL { 90 } -- ::= { tnQueueMgmtPolicyEntry 7 } -- -- tnQueueMgmtPolicyHiMaxProbability OBJECT-TYPE -- SYNTAX Unsigned32 (1..99) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "High Profile Max Probability.Defines the slope between the -- Start Average and Max Average" -- DEFVAL { 75 } -- ::= { tnQueueMgmtPolicyEntry 8 } -- -- tnQueueMgmtPolicyLoAdminStatus OBJECT-TYPE -- SYNTAX INTEGER { -- up (1), -- down(2) -- } -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "tnQueueMgmtPolicyLoAdminStatus specifies the admin state for the queue's -- low profile (Yellow Packets) slope. If the tnQueueMgmtPolicyLoAdminStatus -- is set to 'down',the slope is inactive." -- DEFVAL { down } -- ::= { tnQueueMgmtPolicyEntry 9 } -- -- tnQueueMgmtPolicyLoStartAverage OBJECT-TYPE -- SYNTAX Unsigned32 (0..100) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The percentage of the buffer utilized after which the drop probability -- starts to rise above 0." -- DEFVAL { 50 } -- ::= { tnQueueMgmtPolicyEntry 10 } -- -- tnQueueMgmtPolicyLoMaxAverage OBJECT-TYPE -- SYNTAX Unsigned32 (0..100) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The percentage of the buffer utilized after which the drop probability -- is 100 percent. This implies that all packets beyond this point will be -- dropped." -- DEFVAL { 75 } -- ::= { tnQueueMgmtPolicyEntry 11 } -- -- tnQueueMgmtPolicyLoMaxProbability OBJECT-TYPE -- SYNTAX Unsigned32 (1..99) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Low Profile Max Probability.Defines the slope between the -- Start Average and Max Average" -- DEFVAL { 75 } -- ::= { tnQueueMgmtPolicyEntry 12 } -- -- tnQueueMgmtPolicyCBS OBJECT-TYPE -- SYNTAX INTEGER (-1 | 0..800000) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The amount of reserved buffer space (in kilo bytes) for the queue." -- DEFVAL { -1 } -- ::= { tnQueueMgmtPolicyEntry 13 } -- -- tnQueueMgmtPolicyMBS OBJECT-TYPE -- SYNTAX INTEGER (-1 | 1..800000) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The maximum amount of buffer space (in kilo bytes) allowed for the -- queue." -- DEFVAL { -1 } -- ::= { tnQueueMgmtPolicyEntry 14 } -- -- tnQueueMgmtPolicyTimeAvgFactor OBJECT-TYPE -- SYNTAX Unsigned32 (0..15) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The time average factor describes the weighting between the previous -- shared buffer average utilization result and the new shared buffer -- utilization in determining the new shared buffer average utilization." -- DEFVAL { 7 } -- ::= { tnQueueMgmtPolicyEntry 15 } -- -- tnQueueMgmtPolicyScope OBJECT-TYPE -- SYNTAX TItemScope -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Scope of the queue management policy." -- DEFVAL { template } -- ::= { tnQueueMgmtPolicyEntry 16 } -- -- tnSapEgressExtnTable OBJECT-TYPE -- SYNTAX SEQUENCE OF TSapEgressExtnEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Extension table to tnSapEgressTable" -- ::= { tnSASSapEgressObjects 1 } -- -- tnSapEgressExtnEntry OBJECT-TYPE -- SYNTAX TSapEgressExtnEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "." -- AUGMENTS { tnSapEgressEntry } -- ::= { tnSapEgressExtnTable 1 } -- -- TSapEgressExtnEntry ::= -- SEQUENCE { -- tnSapEgressRemark TruthValue, -- tnSapEgressRemarkPolicyId TRemarkPolicyID -- } -- -- tnSapEgressRemark OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "This object specifies if the system -- will remark the egress packets on SAP or not." -- DEFVAL { false } -- ::= { tnSapEgressExtnEntry 1 } -- -- tnSapEgressRemarkPolicyId OBJECT-TYPE -- SYNTAX TRemarkPolicyID -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Remark Policy Id that be used. The default value is the default -- dot1p-dscp policy." -- DEFVAL { 1 } -- ::= { tnSapEgressExtnEntry 2 } -- -- tnSapEgressQueueExtnTable OBJECT-TYPE -- SYNTAX SEQUENCE OF TSapEgressQueueExtnEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Extension table to tnSapEgressQueueTable" -- ::= { tnSASSapEgressObjects 2 } -- -- tnSapEgressQueueExtnEntry OBJECT-TYPE -- SYNTAX TSapEgressQueueExtnEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION "." -- AUGMENTS { tnSapEgressQueueEntry } -- ::= { tnSapEgressQueueExtnTable 1 } -- -- TSapEgressQueueExtnEntry ::= -- SEQUENCE { -- tnSapEgressQueuePolicyName TNamedItem -- } -- -- tnSapEgressQueuePolicyName OBJECT-TYPE -- SYNTAX TNamedItem -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "SapEgressQueuePolicyName determines the queue management policy -- attached to this SAP Egress queue." -- DEFVAL { "default" } -- ::= { tnSapEgressQueueExtnEntry 1 } -- -- remark policy table -- tnSASRemarkPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSASRemarkPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tnSASGeneralQosObjects 1 } tnSASRemarkPolicyEntry OBJECT-TYPE SYNTAX TSASRemarkPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular remarking policy's forwarding class mappings to dot1p / dscp / exp values. Entries are created/deleted by user." INDEX {tnSysSwitchId, tnSASRemarkPolicyId } ::= { tnSASRemarkPolicyTable 1 } TSASRemarkPolicyEntry ::= SEQUENCE { tnSASRemarkPolicyId TRemarkPolicyID, tnSASRemarkPolicyRowStatus RowStatus, tnSASRemarkPolicyDescription TItemDescription, tnSASRemarkPolicyType INTEGER, tnSASRemarkPolicyLastChanged TimeStamp } tnSASRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remark policy ID is used as index for the table." ::= { tnSASRemarkPolicyEntry 1 } tnSASRemarkPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status." ::= { tnSASRemarkPolicyEntry 2 } tnSASRemarkPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "User-provided description of the policy." DEFVAL { ''H } ::= { tnSASRemarkPolicyEntry 3 } tnSASRemarkPolicyType OBJECT-TYPE SYNTAX INTEGER { dot1p (1), dscp (2), lsp-exp (3), dot1p-dscp (4), dot1p-lsp-exp-shared (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The remarking type of this policy. This specifies which of the fields will be remarked." DEFVAL { dot1p-lsp-exp-shared } ::= { tnSASRemarkPolicyEntry 4 } tnSASRemarkPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row in tnSASRemarkPolicyTable." ::= { tnSASRemarkPolicyEntry 5 } -- -- remark policy FC table -- tnSASRemarkPolicyFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSASRemarkPolicyFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tnSASGeneralQosObjects 2 } tnSASRemarkPolicyFCEntry OBJECT-TYPE SYNTAX TSASRemarkPolicyFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular queue in a remarking policy's forwarding class mappings to dot1p / dscp / exp values. Entries are created/deleted whenever a policy is created/deleted." INDEX {tnSysSwitchId, tnSASRemarkPolicyId, tnSASRemarkPolicyFCName } ::= { tnSASRemarkPolicyFCTable 1 } TSASRemarkPolicyFCEntry ::= SEQUENCE { tnSASRemarkPolicyFCName TFCName, tnSASRemarkPolicyDot1PInProfile Dot1PPriority, tnSASRemarkPolicyDot1POutProfile Dot1PPriority, tnSASRemarkPolicyDSCPInProfile TDSCPNameOrEmpty, tnSASRemarkPolicyDSCPOutProfile TDSCPNameOrEmpty, tnSASRemarkPolicyLspExpInProfile TLspExpValue, tnSASRemarkPolicyLspExpOutProfile TLspExpValue, tnSASRemarkPolicyDot1PLspExpInProfile TDot1PLspExpValue, tnSASRemarkPolicyDot1PLspExpOutProfile TDot1PLspExpValue } tnSASRemarkPolicyFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FC Class Name." ::= { tnSASRemarkPolicyFCEntry 1 } tnSASRemarkPolicyDot1PInProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p to use for in-profile traffic. This field is valid only for the following remarking types: dot1p dot1p-dscp" DEFVAL { -1 } ::= { tnSASRemarkPolicyFCEntry 2 } tnSASRemarkPolicyDot1POutProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p to use for out-of-profile traffic. This field is valid only for the following remarking types: dot1p dot1p-dscp" DEFVAL { -1 } ::= { tnSASRemarkPolicyFCEntry 3 } tnSASRemarkPolicyDSCPInProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for in-profile traffic. This field is valid only for remarking type of dscp and dot1p-dscp." DEFVAL { ''H } ::= { tnSASRemarkPolicyFCEntry 4 } tnSASRemarkPolicyDSCPOutProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for out-of-profile traffic. This field is valid only for remarking type of dscp and dot1p-dscp." DEFVAL { ''H } ::= { tnSASRemarkPolicyFCEntry 5 } tnSASRemarkPolicyLspExpInProfile OBJECT-TYPE SYNTAX TLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The lsp-exp value to use for in-profile traffic. This field is valid only for remarking type of lsp-exp." DEFVAL { -1 } ::= { tnSASRemarkPolicyFCEntry 6 } tnSASRemarkPolicyLspExpOutProfile OBJECT-TYPE SYNTAX TLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The lsp-exp value to use for out-of-profile traffic. This field is valid only for remarking type of lsp-exp." DEFVAL { -1 } ::= { tnSASRemarkPolicyFCEntry 7 } tnSASRemarkPolicyDot1PLspExpInProfile OBJECT-TYPE SYNTAX TDot1PLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p / MPLS Exp value to use for in-profile traffic. This field is valid only for remarking type of dot1p-lsp-exp-shared." DEFVAL { -1 } ::= { tnSASRemarkPolicyFCEntry 8 } tnSASRemarkPolicyDot1PLspExpOutProfile OBJECT-TYPE SYNTAX TDot1PLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p / MPLS Exp value to use for out-profile traffic. This field is valid only for remarking type of dot1p-lsp-exp-shared." DEFVAL { -1 } ::= { tnSASRemarkPolicyFCEntry 9 } -- -- Conformance Information -- -- tnSASQosCompliances OBJECT IDENTIFIER ::= { tnSASQosConformance 1 } -- tnSASQosGroups OBJECT IDENTIFIER ::= { tnSASQosConformance 2 } -- tnSASQosV1v0Group OBJECT-GROUP -- OBJECTS { -- tnAccessEgressRowStatus, -- tnAccessEgressScope, -- tnAccessEgressDescription, -- tnAccessEgressLastChanged, -- tnAccessEgressRemark, -- tnAccessEgressQueueRowStatus, -- tnAccessEgressQueueCBS, -- tnAccessEgressQueueMBS, -- tnAccessEgressQueuePIRAdaptation, -- tnAccessEgressQueueCIRAdaptation, -- tnAccessEgressQueueAdminPIR, -- tnAccessEgressQueueAdminCIR, -- tnAccessEgressQueueOperPIR, -- tnAccessEgressQueueOperCIR, -- tnAccessEgressQueueLastChanged, -- tnAccessEgressFCRowStatus, -- tnAccessEgressFCQueue, -- tnAccessEgressFCDot1PInProfile, -- tnAccessEgressFCDot1POutProfile, -- tnAccessEgressFCLastChanged, -- tnSapIngressMeterRowStatus, -- tnSapIngressMeterMCast, -- tnSapIngressMeterAdminCBS, -- tnSapIngressMeterAdminMBS, -- tnSapIngressMeterOperCBS, -- tnSapIngressMeterOperMBS, -- tnSapIngressMeterCIRAdaptation, -- tnSapIngressMeterPIRAdaptation, -- tnSapIngressMeterAdminPIR, -- tnSapIngressMeterAdminCIR, -- tnSapIngressMeterOperPIR, -- tnSapIngressMeterOperCIR, -- tnSapIngressMeterLastChanged, -- tnSapIngressMeterMode, -- tnSapIngressMeterRateMode, -- tnNetworkIngressFCRowStatus, -- tnNetworkIngressFCMeter, -- tnNetworkIngressFCMCastMeter, -- tnNetworkIngressFCLastChanged, -- tnNetworkIngressMeterRowStatus, -- tnNetworkIngressMeterAdminCBS, -- tnNetworkIngressMeterAdminMBS, -- tnNetworkIngressMeterOperCBS, -- tnNetworkIngressMeterOperMBS, -- tnNetworkIngressMeterCIRAdaptation, -- tnNetworkIngressMeterPIRAdaptation, -- tnNetworkIngressMeterAdminPIR, -- tnNetworkIngressMeterAdminCIR, -- tnNetworkIngressMeterOperPIR, -- tnNetworkIngressMeterOperCIR, -- tnNetworkIngressMeterLastChanged, -- tnNetworkIngressMeterMode, -- tnNetworkIngressMeterMCast, -- tnNetworkIngressMeterRateMode, -- tnSlopeHiQueue1DropRate, -- tnSlopeHiQueue2DropRate, -- tnSlopeHiQueue3DropRate, -- tnSlopeHiQueue4DropRate, -- tnSlopeHiQueue5DropRate, -- tnSlopeHiQueue6DropRate, -- tnSlopeHiQueue7DropRate, -- tnSlopeHiQueue8DropRate, -- tnSlopeLoQueue1DropRate, -- tnSlopeLoQueue2DropRate, -- tnSlopeLoQueue3DropRate, -- tnSlopeLoQueue4DropRate, -- tnSlopeLoQueue5DropRate, -- tnSlopeLoQueue6DropRate, -- tnSlopeLoQueue7DropRate, -- tnSlopeLoQueue8DropRate, -- tnSlopeHiStartThreshold, -- tnSlopeLoStartThreshold, -- tnPortSchedulerPlcyMode, -- tnPortSchedulerPlcyQuanta, -- tnPortSchedulerPlcyQueue1Weight, -- tnPortSchedulerPlcyQueue2Weight, -- tnPortSchedulerPlcyQueue3Weight, -- tnPortSchedulerPlcyQueue4Weight, -- tnPortSchedulerPlcyQueue5Weight, -- tnPortSchedulerPlcyQueue6Weight, -- tnPortSchedulerPlcyQueue7Weight, -- tnPortSchedulerPlcyQueue8Weight, -- tnSapIngressFCMeter, -- tnSapIngressFCMCastMeter, -- tnSapIngressFCBCastMeter, -- tnSapIngressFCUnknownMeter, -- tnSapIngQosMeterId, -- tnSapIngQosMeterStatsForwardedInProfPackets, -- tnSapIngQosMeterStatsForwardedOutProfPackets, -- tnSapIngQosMeterStatsForwardedInProfOctets, -- tnSapIngQosMeterStatsForwardedOutProfOctets, -- tnQosIngressFrameBasedAccnt, -- tnQosEgressFrameBasedAccnt, -- tnSapIngressNumQosClassifiers -- } -- STATUS current -- DESCRIPTION -- " sas group object definition " -- ::= { tnSASQosGroups 1 } -- tmnxSASMQoSV1v0Group OBJECT-GROUP -- OBJECTS { -- tnSlopePolicyQueueRowStatus, -- tnSlopePolicyQueueLastChanged, -- tnSlopePolicyQueueHiAdminStatus, -- tnSlopePolicyQueueHiStartAverage, -- tnSlopePolicyQueueHiMaxAverage, -- tnSlopePolicyQueueHiMaxProbability, -- tnSlopePolicyQueueLoAdminStatus, -- tnSlopePolicyQueueLoStartAverage, -- tnSlopePolicyQueueLoMaxAverage, -- tnSlopePolicyQueueLoMaxProbability, -- tnSlopePolicyQueueNonTcpAdminStatus, -- tnSlopePolicyQueueNonTcpStartAverage, -- tnSlopePolicyQueueNonTcpMaxAverage, -- tnSlopePolicyQueueNonTcpMaxProbability, -- tnSlopePolicyQueueTimeAvgFactor -- } -- STATUS current -- DESCRIPTION -- " SAS M specific group object definition " -- ::= { tnSASQosGroups 2 } --tmnxSASQoSV2v0Group OBJECT-GROUP -- OBJECTS { -- tNetworkQueuePolicyName, -- tNetworkPolicyRemarkPolicyId, -- tNetworkPolicyType, -- tSapEgressQueuePolicyName, -- tSapEgressRemarkPolicyId, -- tSapEgressRemark, -- tAccessEgressRemarkPolicyId, -- tSASRemarkPolicyRowStatus, -- tSASRemarkPolicyDescription, -- tSASRemarkPolicyType, -- tSASRemarkPolicyDot1PInProfile, -- tSASRemarkPolicyDot1POutProfile, -- tSASRemarkPolicyDSCPInProfile, -- tSASRemarkPolicyDSCPOutProfile, -- tSASRemarkPolicyLspExpInProfile, -- tSASRemarkPolicyLspExpOutProfile, -- tSASRemarkPolicyDot1PLspExpInProfile, -- tSASRemarkPolicyDot1PLspExpOutProfile, -- tSASRemarkPolicyLastChanged, -- tQueueMgmtPolicyDescription, -- tQueueMgmtPolicyRowStatus, -- tQueueMgmtPolicyLastChanged, -- tQueueMgmtPolicyHiAdminStatus, -- tQueueMgmtPolicyHiStartAverage, -- tQueueMgmtPolicyHiMaxAverage, -- tQueueMgmtPolicyHiMaxProbability, -- tQueueMgmtPolicyLoAdminStatus, -- tQueueMgmtPolicyLoStartAverage, -- tQueueMgmtPolicyLoMaxAverage, -- tQueueMgmtPolicyLoMaxProbability, -- tQueueMgmtPolicyCBS, -- tQueueMgmtPolicyMBS, -- tQueueMgmtPolicyTimeAvgFactor, -- tQueueMgmtPolicyScope, -- tAccessEgressRowStatus, -- tAccessEgressScope, -- tAccessEgressDescription, -- tAccessEgressLastChanged, -- tAccessEgressRemark, -- tAccessEgressQueueRowStatus, -- tAccessEgressQueueCBS, -- tAccessEgressQueueMBS, -- tAccessEgressQueuePIRAdaptation, -- tAccessEgressQueueCIRAdaptation, -- tAccessEgressQueueAdminPIR, -- tAccessEgressQueueAdminCIR, -- tAccessEgressQueueOperPIR, -- tAccessEgressQueueOperCIR, -- tAccessEgressQueueLastChanged, -- tAccessEgressFCRowStatus, -- tAccessEgressFCQueue, -- tAccessEgressFCDot1PInProfile, -- tAccessEgressFCDot1POutProfile, -- tAccessEgressFCLastChanged, -- tSapIngressMeterRowStatus, -- tSapIngressMeterMCast, -- tSapIngressMeterAdminCBS, -- tSapIngressMeterAdminMBS, -- tSapIngressMeterOperCBS, -- tSapIngressMeterOperMBS, -- tSapIngressMeterCIRAdaptation, -- tSapIngressMeterPIRAdaptation, -- tSapIngressMeterAdminPIR, -- tSapIngressMeterAdminCIR, -- tSapIngressMeterOperPIR, -- tSapIngressMeterOperCIR, -- tSapIngressMeterLastChanged, -- tSapIngressMeterMode, -- tSapIngressMeterRateMode, -- tNetworkIngressFCRowStatus, -- tNetworkIngressFCMeter, -- tNetworkIngressFCMCastMeter, -- tNetworkIngressFCLastChanged, -- tNetworkIngressMeterRowStatus, -- tNetworkIngressMeterAdminCBS, -- tNetworkIngressMeterAdminMBS, -- tNetworkIngressMeterOperCBS, -- tNetworkIngressMeterOperMBS, -- tNetworkIngressMeterCIRAdaptation, -- tNetworkIngressMeterPIRAdaptation, -- tNetworkIngressMeterAdminPIR, -- tNetworkIngressMeterAdminCIR, -- tNetworkIngressMeterOperPIR, -- tNetworkIngressMeterOperCIR, -- tNetworkIngressMeterLastChanged, -- tNetworkIngressMeterMode, -- tNetworkIngressMeterMCast, -- tNetworkIngressMeterRateMode, -- tSlopeHiQueue1DropRate, -- tSlopeHiQueue2DropRate, -- tSlopeHiQueue3DropRate, -- tSlopeHiQueue4DropRate, -- tSlopeHiQueue5DropRate, -- tSlopeHiQueue6DropRate, -- tSlopeHiQueue7DropRate, -- tSlopeHiQueue8DropRate, -- tSlopeLoQueue1DropRate, -- tSlopeLoQueue2DropRate, -- tSlopeLoQueue3DropRate, -- tSlopeLoQueue4DropRate, -- tSlopeLoQueue5DropRate, -- tSlopeLoQueue6DropRate, -- tSlopeLoQueue7DropRate, -- tSlopeLoQueue8DropRate, -- tSlopeHiStartThreshold, -- tSlopeLoStartThreshold, -- tPortSchedulerPlcyMode, -- tPortSchedulerPlcyQuanta, -- tPortSchedulerPlcyQueue1Weight, -- tPortSchedulerPlcyQueue2Weight, -- tPortSchedulerPlcyQueue3Weight, -- tPortSchedulerPlcyQueue4Weight, -- tPortSchedulerPlcyQueue5Weight, -- tPortSchedulerPlcyQueue6Weight, -- tPortSchedulerPlcyQueue7Weight, -- tPortSchedulerPlcyQueue8Weight, -- tSapIngressFCMeter, -- tSapIngressFCMCastMeter, -- tSapIngressFCBCastMeter, -- tSapIngressFCUnknownMeter, -- sapIngQosMeterId, -- sapIngQosMeterStatsForwardedInProfPackets, -- sapIngQosMeterStatsForwardedOutProfPackets, -- sapIngQosMeterStatsForwardedInProfOctets, -- sapIngQosMeterStatsForwardedOutProfOctets, -- tQosIngressFrameBasedAccnt, -- tQosEgressFrameBasedAccnt, -- tSapIngressNumQosClassifiers, -- tSapIngressQosClassifiersRequiredInVpls, -- tSapIngressQosClassifiersRequiredInEpipe, -- tSapIngressQosMetersRequiredInVpls, -- tSapIngressQosMetersRequiredInEpipe, -- tSapIngressIPCriteriaMatch, -- tSapIngressMacCriteriaMatch --} -- STATUS current -- DESCRIPTION -- " sas group object definition " -- ::= { tmnxSASQosGroups 3 } -- tnSASQosObsolete7210V2v0Group OBJECT-GROUP -- OBJECTS -- { -- tnNetworkIngressMeterCBS, -- tnNetworkIngressMeterMBS, -- tnSapIngressMeterCBS, -- tnSapIngressMeterMBS, -- tnSapIngressQosClassifiersUsed, -- tnSapIngressQosMetersUsed -- } -- STATUS current -- DESCRIPTION -- "The group of objects which are obsoleted from version 2.0 of -- Nokia 7210 series systems." -- ::= { tnSASQosGroups 4} --tmnxSASQos7210V4v0Group OBJECT-GROUP -- OBJECTS --{ -- tGlobalMplsLspExpProfile, -- tLdpLocalFcEnableAdminStatus, -- tLdpLocalFcEnableOperStatus, -- tMplsLspExpProfMapRowStatus, -- tMplsLspExpProfMapDescription, -- tAccessEgressRemarkType, -- tAccessEgressFCDscpInProfile, -- tAccessEgressFCDscpOutProfile, -- sapIngQosMeterStatsForwardedPackets, -- sapIngQosMeterStatsForwardedOctets, -- sapIngQosMeterStatsDroppedPackets, -- sapIngQosMeterStatsDroppedOctets --} -- STATUS current -- DESCRIPTION -- "The group of objects which are obsoleted from version 4.0 of -- Nokia 7210 series systems." -- ::= { tmnxSASQosGroups 5} --tmnxSASQoSComp7210V1v0 MODULE-COMPLIANCE -- STATUS current -- DESCRIPTION -- "The compliance statement for revision 1.0 of TIMETRA-SAS-QOS-MIB." -- MODULE this module -- MANDATORY-GROUPS { -- tmnxSASQoSV1v0Group -- } -- ::= { tmnxSASQosCompliances 1 } -- tnSASQosComp7210V2v0 MODULE-COMPLIANCE -- STATUS current -- DESCRIPTION -- "The compliance statement for revision 2.0 of TIMETRA-SAS-QOS-MIB." -- MODULE this module -- MANDATORY-GROUPS { -- tnSASQosV2v0Group -- } -- ::= { tnSASQosCompliances 2 } END