TN-MC-REDUNDANCY-MIB DEFINITIONS ::= BEGIN -- (c) Copyright 2021 Nokia Networks. All rights reserved. -- This software is the confidential and proprietary property of -- Nokia and may only be used in accordance with the terms of the -- license agreement provided with this software. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TimeStamp, TruthValue, DisplayString FROM SNMPv2-TC TNamedItemOrEmpty, TmnxAdminState, TmnxVRtrID,TmnxOperState, TmnxEncapVal, TItemDescription, TmnxPortID, TNamedItem, TmnxEnabledDisabled FROM TN-TC-MIB tnSRMIBModules, tnSRObjs, tnSRNotifyPrefix FROM TROPIC-GLOBAL-REG InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB LAGInterfaceNumber FROM TN-LAG-MIB tnSvcId FROM TN-SERV-MIB tnSapPortId, tnSapEncapValue FROM TN-SAP-MIB tnSysSwitchId FROM TROPIC-SYSTEM-MIB ; tnMcRedundancyMIBModule MODULE-IDENTITY LAST-UPDATED "201211280000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia 7x50 Support Web: http://www.nokia.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision the various services of the Nokia 7x50 SR system. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "201211280000Z" DESCRIPTION "Rev 1.0 28 Nov 2012 00:00 1.0 release of the TIMETRA-MC-REDUNDANCY-MIB." ::= { tnSRMIBModules 40 } -- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Nokia SROS series redundancy objects -- tnMcRedundancy OBJECT IDENTIFIER ::= { tnSRObjs 40 } tnMcRedundancyObjs OBJECT IDENTIFIER ::= { tnMcRedundancy 1 } tnMcRedundancyStatsObjs OBJECT IDENTIFIER ::= { tnMcRedundancy 2 } -- tnMcRedundancyNotifyObjs OBJECT IDENTIFIER ::= { tnMcRedundancy 3 } -- tnMcRedundancyConformance OBJECT IDENTIFIER ::= { tnSRConfs 40 } -- tnMcRedundancyCompliances OBJECT IDENTIFIER ::= { tnMcRedundancyConformance 1 } -- tnMcRedundancyGroups OBJECT IDENTIFIER ::= { tnMcRedundancyConformance 2 } -- tnMcRedundancyNotifGroups OBJECT IDENTIFIER ::= { tnMcRedundancyConformance 3 } -- tnMcRedundancyNotifyPrefix OBJECT IDENTIFIER ::= { tnSRNotifyPrefix 40 } -- tnMcRedundancyNotifications OBJECT IDENTIFIER ::= { tnMcRedundancyNotifyPrefix 0 } -- -------------------------------------------------------------------- -- TIMETRA-MC-REDUNDANCY-MIB Textual Conventions -- -------------------------------------------------------------------- TmnxMcsClientApp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates an Multi-Chassis Synchronization (MCS) client application." SYNTAX INTEGER { igmp(0), igmpSnooping(1), subMgmtIpoe(2), srrp(3), mcRing(4), mldSnooping(5), dhcpServer(6), subHostTrk(7), subMgmtPppoe(8) } -- TmnxMcRingOperState ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TmnxMcRingOperState data type is an enumerated integer -- that describes the values used to identify the operational state of -- a multi-chassis ring. -- unknown -- shutdown -- configErr -- noPeer : the peer has no corresponding ring configured; -- connected : the inband control connection with the peer -- is operational; -- broken : the inband control connection with the peer -- has timed out; -- localBroken : the inband control connection with the peer -- is known to be broken because of a local -- failure or local administrative action; -- conflict : the inband control connection with the peer -- has timed out but the physical connection is -- probably still OK; the failure of the inband -- signaling connection is caused by some -- misconfiguration. -- E.g. a conflict between the configuration of -- this system and its peer, or a misconfiguration -- on one of the ring access node systems. -- testingRing : the inband control connection with the peer -- is being set up. Waiting for result. -- halfBroken : the inband control connection indicates that -- the ring is broken in one direction (towards -- the peer); -- waitingForPeer : verifying if this ring is configured on the -- peer." -- SYNTAX INTEGER { -- unknown (1), -- shutdown (2), -- configErr (3), -- noPeer (4), -- connected (5), -- broken (6), -- localBroken (7), -- conflict (8), -- testingRing (9), -- halfBroken (10), -- waitingForPeer (11) -- } -- TmnxMcRingInbCtrlOperState ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TmnxMcRingInbCtrlOperState data type is an enumerated integer -- that describes the values used to identify the operational state of -- a multi-chassis ring's inband control connection. -- unknown -- connected : the inband control connection with the peer -- is operational; -- broken : the inband control connection with the peer -- has timed out; -- testing : the inband control connection with the peer -- is being set up. Waiting for result. -- peerDetectsDown : the peer detects that the inband control -- connection is down; -- notConfigured : the inband control connection with the peer -- is not configured." -- SYNTAX INTEGER { -- unknown (1), -- connected (2), -- broken (3), -- testing (4), -- peerDetectsDown (5), -- notConfigured (6) -- } -- TmnxMcRingNodeOperState ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TmnxMcRingNodeOperState data type is an enumerated integer -- that describes the values used to identify the operational state of -- a multi-chassis ring access node." -- SYNTAX INTEGER { -- unknown (1), -- notProvisioned (2), -- configErr (3), -- notTested (4), -- testing (5), -- connected (6), -- disconnected (7) -- } -- TmnxSrrpAssoBfdIntfSessOperState ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TmnxSrrpAssoBfdIntfSessOperState data type is an enumerated integer -- that describes the values used to identify the operational state of -- a BFD session the SRRP instance is relying upon for its -- fast triggering mechanism." -- SYNTAX INTEGER { -- unknown (1), -- connected (2), ## the BFD connection with the peer is operational -- broken (3), ## the BFD connection with the peer has timed out -- peerDetectsDown(4),## the peer detects that the BFD connection is down -- notConfigured (5),## the BFD connection with the peer is not configured -- noResources (6) ## resource not available -- } -- TmnxMcRingType ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION -- "The TmnxMcRingType data type is an enumerated integer that describes -- the type of the multi-chassis ring." -- SYNTAX INTEGER { -- layer2 (1), -- layer3 (2) -- } -- ------------------------------------------------ -- Multi-chassis peer table -- ------------------------------------------------ tnMcPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcPeerTable has an entry for each multi-chassis peer configured on this system." ::= { tnMcRedundancyObjs 1 } tnMcPeerEntry OBJECT-TYPE SYNTAX TmnxMcPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular multi-chassis peer. Entries are create/deleted by the user." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr } ::= { tnMcPeerTable 1} TmnxMcPeerEntry ::= SEQUENCE { tnMcPeerIpType InetAddressType, tnMcPeerIpAddr InetAddress, tnMcPeerRowStatus RowStatus, tnMcPeerDescription TItemDescription, tnMcPeerAuthKey OCTET STRING, tnMcPeerSrcIpType InetAddressType, tnMcPeerSrcIpAddr InetAddress, tnMcPeerAdminState TmnxAdminState, tnMcPeerSrcIpOperType InetAddressType, tnMcPeerSrcIpOperAddr InetAddress, tnMcPeerRingsOperState TmnxOperState, tnMcPeerName TNamedItemOrEmpty } tnMcPeerIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcPeerIpType indicates the address type of tnMcPeerIpAddr." ::= { tnMcPeerEntry 1 } tnMcPeerIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcPeerIpAddr indicates the address of the multi-chassis peer. Its type is specified by tnMcPeerIpType. It must be a valid unicast address." ::= { tnMcPeerEntry 2 } tnMcPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerRowStatus is used for creation/deletion of multi-chassis peers." ::= { tnMcPeerEntry 3 } tnMcPeerDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerDescription specifies the textual description of this multi-chassis peer." DEFVAL { "" } ::= { tnMcPeerEntry 4 } tnMcPeerAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerAuthKey specifies the authentication key used between this node and the multi-chassis peer. The authentication key can be any combination of letters or numbers. This object will always return an empty string on a read." DEFVAL { ''H } ::= { tnMcPeerEntry 5 } tnMcPeerSrcIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSrcIpType specifies the address type of tnMcPeerSrcIpAddr." DEFVAL { unknown } ::= { tnMcPeerEntry 6 } tnMcPeerSrcIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSrcIpAddr specifies the source address used to communicate with the multi-chassis peer. Its type is specified by tnMcPeerSrcIpType. It must be a valid unicast address." DEFVAL { ''H } ::= { tnMcPeerEntry 7 } tnMcPeerAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerAdminState specifies the administrative state of this multi-chassis peer." DEFVAL { outOfService } ::= { tnMcPeerEntry 8 } tnMcPeerSrcIpOperType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSrcIpOperType indicates the operational source address type of tnMcPeerSrcIpOperAddr, the multi-chassis peer source IP address." ::= { tnMcPeerEntry 9 } tnMcPeerSrcIpOperAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSrcIpOperAddr indicates the operational source address in use to communicate with the multi-chassis peer. Its type is specified by tnMcPeerSrcIpOperType." ::= { tnMcPeerEntry 10 } tnMcPeerRingsOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerRingsOperState indicates the operational state of this multi-chassis peer with respect to multi-chassis ring operation. If there are no entries in the tnMcRingTable associated with this peer, the value of tnMcPeerRingsOperState is 'unknown'." ::= { tnMcPeerEntry 11 } tnMcPeerName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerName specifies the name of this multi-chassis peer." DEFVAL { "" } ::= { tnMcPeerEntry 12 } -- ------------------------------------------------ -- Multi-chassis peer sync table -- ------------------------------------------------ tnMcPeerSyncTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcPeerSyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcPeerSyncTable has an entry for each multi-chassis peer synchronization protocol." ::= { tnMcRedundancyObjs 2 } tnMcPeerSyncEntry OBJECT-TYPE SYNTAX TmnxMcPeerSyncEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular multi-chassis peer synchronization protocol. Entries are create/deleted by the user." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr } ::= { tnMcPeerSyncTable 1} TmnxMcPeerSyncEntry ::= SEQUENCE { tnMcPeerSyncRowStatus RowStatus, tnMcPeerSyncIgmp TruthValue, tnMcPeerSyncIgmpSnooping TruthValue, tnMcPeerSyncSubMgmt TruthValue, tnMcPeerSyncSrrp TruthValue, tnMcPeerSyncAdminState TmnxAdminState, tnMcPeerSyncOperState TmnxOperState, tnMcPeerSyncOperFlags BITS, tnMcPeerSyncStatus INTEGER, tnMcPeerSyncLastSyncTime TimeStamp, tnMcPeerSyncNumEntries Counter32, tnMcPeerSyncLclDeletedEntries Counter32, tnMcPeerSyncAlarmedEntries Counter32, tnMcPeerSyncRemNumEntries Counter32, tnMcPeerSyncRemLclDelEntries Counter32, tnMcPeerSyncRemAlarmedEntries Counter32 -- tnMcPeerSyncMcRing TruthValue, -- tnMcPeerSyncMldSnooping TruthValue, -- tnMcPeerSyncDhcpServer TruthValue, -- tnMcPeerSyncSubHostTrk TruthValue, -- tnMcPeerSyncSubMgmtPppoe TruthValue } tnMcPeerSyncRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncRowStatus is used for creation and deletion of a synchronization protocol with a multi-chassis peer." ::= { tnMcPeerSyncEntry 1 } tnMcPeerSyncIgmp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncIgmp specifies whether IGMP protocol information should be synchronized with the multi-chassis peer." DEFVAL { false } ::= { tnMcPeerSyncEntry 2 } tnMcPeerSyncIgmpSnooping OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncIgmpSnooping specifies whether IGMP-snooping information should be synchronized with the multi-chassis peer." DEFVAL { false } ::= { tnMcPeerSyncEntry 3 } tnMcPeerSyncSubMgmt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncSubMgmt specifies whether subscriber management IPoE information should be synchronized with the multi-chassis peer." DEFVAL { false } ::= { tnMcPeerSyncEntry 4 } tnMcPeerSyncSrrp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncSrrp specifies whether SRRP information should be synchronized with the multi-chassis peer." DEFVAL { false } ::= { tnMcPeerSyncEntry 5 } tnMcPeerSyncAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncAdminState specifies the administrative status of the synchronization protocol with the multi-chassis peer." DEFVAL { outOfService } ::= { tnMcPeerSyncEntry 6 } tnMcPeerSyncOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncOperState indicates the operational status of the synchronization protocol with the multi-chassis peer." ::= { tnMcPeerSyncEntry 7 } tnMcPeerSyncOperFlags OBJECT-TYPE SYNTAX BITS { syncAdminDown(0), peerAdminDown(1), connectionDown(2), internalError(3), mcsVersionMismatch(4), platformMismatch(5), appVersionMismatch(6), appSupportMismatch(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncOperFlags indicates the reason that the synchronization protocol with the multi-chassis peer is down. syncAdminDown(0) Synchronization is administratively down. No recovery needed. peerAdminDown(1) The peering is administratively down. No recovery needed. connectionDown(2) There is a problem with the connection to the multi-chassis peer. The connection will be automatically repaired. No recovery needed internalError(3) There has been an irrecoverable internal error. The synchronization protocol cannot come up again without user intervention. The user must set the tnMcPeerSyncAdminState to 'outOfService', then 'inService'. mcsVersionMismatch(4) There is a mismatch between the versions of the multi-chassis sync protocol running on each peer. platformMismatch(5) There is a mismatch between the platforms of each peer the multi-chassis sync protocol is running on. appVersionMismatch(6) There is a mismatch between the versions of applications attempting to use the multi-chassis sync protocol on the two peers. appSupportMismatch(7) There is a mismatch between the applications supported by the multi-chassis sync protocol on each peer." ::= { tnMcPeerSyncEntry 8 } tnMcPeerSyncStatus OBJECT-TYPE SYNTAX INTEGER { inSync(1), syncInProgress(2), outOfSync(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncStatus indicates the status of the synchronization process." ::= { tnMcPeerSyncEntry 9 } tnMcPeerSyncLastSyncTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncLastSyncTime indicates the sysUpTime at the time the last synchronization with the peer was successful." ::= { tnMcPeerSyncEntry 10 } tnMcPeerSyncNumEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncNumEntries indicates the total number of entries in the MCS database per multi-chassis peer." ::= { tnMcPeerSyncEntry 11 } tnMcPeerSyncLclDeletedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncLclDeletedEntries indicates the number of locally deleted entries in the MCS database per multi-chassis peer. Locally deleted entries are entries that are not being used by the local MCS client application." ::= { tnMcPeerSyncEntry 12 } tnMcPeerSyncAlarmedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncAlarmedEntries indicates the number of alarmed entries in the MCS database per multi-chassis peer. Entries with an alarm are entries that are not being used by the local client application due to resource constraints." ::= { tnMcPeerSyncEntry 13 } tnMcPeerSyncRemNumEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncRemNumEntries indicates the total number of entries in the MCS database of the multi-chassis peer." ::= { tnMcPeerSyncEntry 14 } tnMcPeerSyncRemLclDelEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncRemLclDelEntries indicates the number of locally deleted entries in the MCS database of the multi-chassis peer. Locally deleted entries are entries that are not being used by the remote MCS client application." ::= { tnMcPeerSyncEntry 15 } tnMcPeerSyncRemAlarmedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncRemAlarmedEntries indicates the number of alarmed entries in the MCS database of the multi-chassis peer. Entries with an alarm are entries that are not being used by the remote client application due to resource constraints." ::= { tnMcPeerSyncEntry 16 } -- tnMcPeerSyncMcRing OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The value of tmnxMcPeerSyncMcRing specifies whether mc-ring -- information should be synchronized with the multi-chassis peer. -- -- Setting this object to 'true(1)' enables the synchronization." -- DEFVAL { false } -- ::= { tmnxMcPeerSyncEntry 17 } -- -- tnMcPeerSyncMldSnooping OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The value of tmnxMcPeerSyncMldSnooping specifies whether -- MLD-snooping information should be synchronized with the -- multi-chassis peer. -- -- Setting this object to 'true(1)' enables the synchronization." -- DEFVAL { false } -- ::= { tmnxMcPeerSyncEntry 18 } -- -- tnMcPeerSyncDhcpServer OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The value of tmnxMcPeerSyncDhcpServer specifies whether DHCP Server -- information should be synchronized with the multi-chassis peer. -- -- Setting this object to 'true(1)' enables the synchronization." -- DEFVAL { false } -- ::= { tmnxMcPeerSyncEntry 19 } -- -- tnMcPeerSyncSubHostTrk OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The value of tmnxMcPeerSyncSubHostTrk specifies whether subscriber -- host tracking information should be synchronized with the -- multi-chassis peer. -- -- Setting this object to 'true(1)' enables the synchronization." -- DEFVAL { false } -- ::= { tmnxMcPeerSyncEntry 20 } -- -- tnMcPeerSyncSubMgmtPppoe OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The value of tmnxMcPeerSyncSubMgmtPppoe specifies whether subscriber -- management PPPoE information should be synchronized with the -- multi-chassis peer." -- DEFVAL { false } -- ::= { tmnxMcPeerSyncEntry 21 } -- -- ------------------------------------------------ -- Multi-chassis peer sync port table -- ------------------------------------------------ tnMcPeerSyncPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcPeerSyncPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcPeerSyncPortTable has an entry for each port that is being synchronized with a multi-chassis peer." ::= { tnMcRedundancyObjs 3 } tnMcPeerSyncPortEntry OBJECT-TYPE SYNTAX TmnxMcPeerSyncPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a port to be synchronized. Entries are created/deleted by the user." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr, tnMcPeerSyncPortId } ::= { tnMcPeerSyncPortTable 1} TmnxMcPeerSyncPortEntry ::= SEQUENCE { tnMcPeerSyncPortId TmnxPortID, tnMcPeerSyncPortRowStatus RowStatus, tnMcPeerSyncPortSyncTag TNamedItemOrEmpty } tnMcPeerSyncPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcPeerSyncPortId indicates the port to be synchronized with the multi-chassis peer." ::= { tnMcPeerSyncPortEntry 1 } tnMcPeerSyncPortRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncPortRowStatus is used for creation and deletion of ports to be synchronized with the multi-chassis peer." ::= { tnMcPeerSyncPortEntry 2 } tnMcPeerSyncPortSyncTag OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncPortSyncTag specifies a synchronization tag to be used while synchronizing this port with the multi-chassis peer." DEFVAL { ''H } ::= { tnMcPeerSyncPortEntry 3 } -- ------------------------------------------------ -- Multi-chassis peer sync port encap range table -- ------------------------------------------------ tnMcPeerSyncPortEncapRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcPeerSyncPortEncapRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcPeerSyncPortEncapRangeTable has an entry for each port encapsulation value range to be synchronized with a multi-chassis peer." ::= { tnMcRedundancyObjs 4 } tnMcPeerSyncPortEncapRangeEntry OBJECT-TYPE SYNTAX TmnxMcPeerSyncPortEncapRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a range of encapsulation values on a port to be synchronized with a multi-chassis peer. Entries are created/deleted by the user." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr, tnMcPeerSyncPortId, tnMcPeerSyncPortEncapType, tnMcPeerSyncPortEncapMin, tnMcPeerSyncPortEncapMax} ::= { tnMcPeerSyncPortEncapRangeTable 1} TmnxMcPeerSyncPortEncapRangeEntry ::= SEQUENCE { tnMcPeerSyncPortEncapType INTEGER, tnMcPeerSyncPortEncapMin TmnxEncapVal, tnMcPeerSyncPortEncapMax TmnxEncapVal, tnMcPeerSyncPortEncapRowStatus RowStatus, tnMcPeerSyncPortEncapSyncTag TNamedItem } tnMcPeerSyncPortEncapType OBJECT-TYPE SYNTAX INTEGER { dot1q(1), qinq(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcPeerSyncPortEncapType indicates the encapsulation type used to interpret tnMcPeerSyncPortEncapMin and tnMcPeerSyncPortEncapMax." ::= { tnMcPeerSyncPortEncapRangeEntry 1 } tnMcPeerSyncPortEncapMin OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcPeerSyncPortEncapMin indicates the minimum encapsulation value on the port indicated by tnMcPeerSyncPortId that will be synchronized with the multi-chassis peer." ::= { tnMcPeerSyncPortEncapRangeEntry 2 } tnMcPeerSyncPortEncapMax OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcPeerSyncPortEncapMax indicates the maximum encapsulation value on the port indicated by tnMcPeerSyncPortId that will be synchronized with the multi-chassis peer." ::= { tnMcPeerSyncPortEncapRangeEntry 3 } tnMcPeerSyncPortEncapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncPortEncapRowStatus is used for creation and deletion of encapsulation value ranges over a specific port to be synchronized with the multi-chassis peer." ::= { tnMcPeerSyncPortEncapRangeEntry 4 } tnMcPeerSyncPortEncapSyncTag OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcPeerSyncPortEncapSyncTag specifies a synchronization tag to be used while synchronizing this encapsulation value range with the multi-chassis peer. This object MUST be specified at row creation time." ::= { tnMcPeerSyncPortEncapRangeEntry 5 } -- ------------------------------------------------ -- tMcPeerLagConfigLagTable table -- ------------------------------------------------ tnMcLagConfigTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tnMcLagConfigTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tnMcRedundancyObjs 5 } tnMcLagConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcLagConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcLagConfigTable has an entry for each multi-chassis LAG configuration for the indicated peer." ::= { tnMcRedundancyObjs 6 } tnMcLagConfigEntry OBJECT-TYPE SYNTAX TmnxMcLagConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents configuration data for a multi-chassis LAG configuration with a given peer. Rows are created or removed automatically by the system, each time a row is created or deleted in the tnMcPeerTable." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr } ::= { tnMcLagConfigTable 1 } TmnxMcLagConfigEntry ::= SEQUENCE { tnMcLagConfigPeerLastChanged TimeStamp, tnMcLagConfigPeerAdminstate TmnxAdminState, tnMcLagConfigKeepALiveIvl Unsigned32, tnMcLagConfigHoldOnNgbrFailure Unsigned32, tnMcLagConfigOperState INTEGER, tnMcLagConfigPeerLastStateChge TimeStamp } tnMcLagConfigPeerLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigPeerLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tnMcLagConfigEntry 1 } tnMcLagConfigPeerAdminstate OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tnMcLagConfigPeerAdminstate specifies the administrative state of the multi-chassis lag with the indicated peer." DEFVAL { outOfService } ::= { tnMcLagConfigEntry 2 } tnMcLagConfigKeepALiveIvl OBJECT-TYPE SYNTAX Unsigned32 (5..500) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tnMcLagConfigKeepALiveIvl specifies the mc-lag keepalive timer value in units of 0.1 sec. This defines the interval at which keep-alive messages are exchanged between two systems participating in mc-lag. These keep-alive messages are used to determine remote-node failure." DEFVAL { 10 } -- 1 sec ::= { tnMcLagConfigEntry 3 } tnMcLagConfigHoldOnNgbrFailure OBJECT-TYPE SYNTAX Unsigned32 (2..25) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tnMcLagConfigHoldOnNgbrFailure specifies how many tnMcLagConfigKeepALiveIvl intervals the standby node will wait for packets from the active node before assuming a redundant-neighbor node failure. This delay in switch-over operation is required to accommodate for different factors influencing node failure detection rate, such as IGP convergence, or HA switch-over times and to prevent that the standby node takes actions prematurely." DEFVAL { 3 } ::= { tnMcLagConfigEntry 4 } tnMcLagConfigOperState OBJECT-TYPE SYNTAX INTEGER { inService (0), outOfService (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigOperState indicates the operational status of this multi-chassis LAG peer." ::= { tnMcLagConfigEntry 5 } tnMcLagConfigPeerLastStateChge OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigPeerLastStateChge indicates the sysUpTime at the time of the last operational state change for this multi-chassis LAG peer. If no changes were made since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tnMcLagConfigEntry 6 } -- ------------------------------------------------ -- tnMcLagConfigLagTable table -- ------------------------------------------------ tnMcLagConfigLagTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigLagTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tnMcLagConfigLagTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tnMcRedundancyObjs 7 } tnMcLagConfigLagTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcLagConfigLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcLagConfigLagTable has an entry for each lag that participates in a multi-chassis configuration for the indicated peer." ::= { tnMcRedundancyObjs 8 } tnMcLagConfigLagEntry OBJECT-TYPE SYNTAX TmnxMcLagConfigLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents configuration data for a lag that participates in a multi-chassis configuration with a given peer. Rows can be created and deleted by the operator." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr, tnMcLagConfigLagId } ::= { tnMcLagConfigLagTable 1 } TmnxMcLagConfigLagEntry ::= SEQUENCE { tnMcLagConfigLagId LAGInterfaceNumber, tnMcLagConfigLagLastChanged TimeStamp, tnMcLagConfigLagRowStatus RowStatus, tnMcLagConfigLaglacpKey Unsigned32, tnMcLagConfigLagSystemId OCTET STRING, tnMcLagConfigLagSystemPriority Unsigned32, tnMcLagConfigLagRemoteLagId LAGInterfaceNumber, tnMcLagConfigLagSrcBMacLSB Unsigned32, tnMcLagConfigLagOperSrcBMacLSB Unsigned32, tnMcLagConfigLagFlushEthRingOnActive TmnxEnabledDisabled } tnMcLagConfigLagId OBJECT-TYPE SYNTAX LAGInterfaceNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcLagConfigLagId identifies the Link Aggregation Group on this system that is to form a mc-lag configuration with the indicated peer." ::= { tnMcLagConfigLagEntry 1 } tnMcLagConfigLagLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigLagLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tnMcLagConfigLagEntry 2 } tnMcLagConfigLagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLagRowStatus specifies the row status of this row." ::= { tnMcLagConfigLagEntry 3 } tnMcLagConfigLaglacpKey OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLaglacpKey specifies a 16bit key that needs to be configured in the same manner on both sides of the mc-lag in order for the mc-lag to come up. The value of tnMcLagConfigLaglacpKey must be 0 when the value of tLagStandbySignaling of the corresponding LAG is 'powerOff (2)'. The value of tnMcLagConfigLaglacpKey cannot be 0 when the value of tLagStandbySignaling of the corresponding LAG is 'lacp (1)'." ::= { tnMcLagConfigLagEntry 4 } tnMcLagConfigLagSystemId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLagSystemId specifies the system-id to be used in the context of mc-lag operation. The partner system will consider all ports using the same system-id, system priority and lacp-key as part of the same lag. In order to achieve this in mc-lag operation, both systems have to be configured with the same values. As long as the system does not have the connection with its redundant peer, it will use the locally defined value (chassis MAC address). After detecting a redundant node failure, the previously active system will keep on using the system-id configured here, while the standby system will switch to its locally defined value. The value of this object must be all zeroes when the value of tLagStandbySignaling of the corresponding LAG is 'powerOff (2)'. The value of this object cannot be all zeroes when the value of tLagStandbySignaling of the corresponding LAG is 'lacp (1)'." ::= { tnMcLagConfigLagEntry 5 } tnMcLagConfigLagSystemPriority OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLagSystemPriority specifies the system priority to be used in the context of mc-lag. The partner system will consider all ports using the same system-id, system priority and lacp-key as part of the same lag. In order to achieve this in mc-lag operation, both systems have to be configured with the same values. A low numeric value specifies a high system priority. The value of this object must be 0 when the value of tLagStandbySignaling of the corresponding LAG is 'powerOff (2)'. The value of this object cannot be 0 when the value of tLagStandbySignaling of the corresponding LAG is 'lacp (1)'." ::= { tnMcLagConfigLagEntry 6 } tnMcLagConfigLagRemoteLagId OBJECT-TYPE SYNTAX LAGInterfaceNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLagRemoteLagId specifies the Lag ID on the remote system. If not specified, the value of this object will be set to the value of tnMcLagConfigLagId." ::= { tnMcLagConfigLagEntry 7 } tnMcLagConfigLagSrcBMacLSB OBJECT-TYPE SYNTAX Unsigned32 (0|1..65535|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLagSrcBMacLSB specifies the value of last 16-bits of the MAC address used for all the traffic ingressing the MC-Lag links. The value '4294967295' indicates use of the lacp-key as source backbone MAC address LSB." DEFVAL { 0 } ::= { tnMcLagConfigLagEntry 8 } tnMcLagConfigLagOperSrcBMacLSB OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigLagOperSrcBMacLSB indicates the operational value of last 16-bits of the MAC address used for all the traffic ingressing the MC-Lag links." ::= { tnMcLagConfigLagEntry 9 } tnMcLagConfigLagFlushEthRingOnActive OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcLagConfigLagFlushEthRingOnActive specifies whether or not to flush the ethernet rings to which the services that the LAG is part of are attached." DEFVAL { disabled } ::= { tnMcLagConfigLagEntry 10 } -- ------------------------------------------------ -- tnMcLagInfoLagTable table -- ------------------------------------------------ tnMcLagInfoLagTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcLagInfoLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcLagInfoLagTable has an entry for each lag that participates in a multi-chassis configuration for the indicated peer." ::= { tnMcRedundancyObjs 10 } tnMcLagInfoLagEntry OBJECT-TYPE SYNTAX TmnxMcLagInfoLagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents operational data for a lag that participates in a multi-chassis configuration with a given peer. Rows are created or removed automatically by the system, each time a row is created or deleted in the tnMcLagConfigLagTable." AUGMENTS { tnMcLagConfigLagEntry } ::= { tnMcLagInfoLagTable 1 } TmnxMcLagInfoLagEntry ::= SEQUENCE { tnMcLagActiveStandby TruthValue, tnMcLagLacpIdInUse TruthValue, tnMcLagExtendedTimeOut TruthValue, tnMcLagSelectionLogic DisplayString, tnMcLagConfigMismatchString DisplayString, tnMcLagConfigMismatchFlags BITS } tnMcLagActiveStandby OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagActiveStandby indicates whether this mc-lag is active or standby. If the value of this object is 'true', this mc-lag is active." ::= { tnMcLagInfoLagEntry 1 } tnMcLagLacpIdInUse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagLacpIdInUse indicates whether or not the mc-lag values (i.e. system-id, system priority and lacp-key) are advertised to the Lacp peer. If the value of this object is 'true', the mc-lag values are advertised. Otherwise the normal lag values are advertised." ::= { tnMcLagInfoLagEntry 2 } tnMcLagExtendedTimeOut OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagExtendedTimeOut indicates whether or not the system is using the value of tnMcLagConfigHoldOnNgbrFailure. If this is 'true', the system is temporarily using a larger value than the value configured in tnMcLagConfigHoldOnNgbrFailure." ::= { tnMcLagInfoLagEntry 3 } tnMcLagSelectionLogic OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagSelectionLogic is a printable character string which contains information about the multi-chassis selection logic." ::= { tnMcLagInfoLagEntry 4 } tnMcLagConfigMismatchString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigMismatchString is a printable character string which contains information about the multi-chassis configuration mismatch." ::= { tnMcLagInfoLagEntry 5 } tnMcLagConfigMismatchFlags OBJECT-TYPE SYNTAX BITS { lagIsNotMultiChassis(0), localRemoteLagIdMismatch(1), lagSelectionCriteriaMismatch(2), lagEncapsulationMismatch(3), mcLacpkeyMismatch(4), mcSystemPriorityMismatch(5), mcSystemIdMismatch(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagConfigMismatchFlags indicates the operational status of the multi-chassis configuration. lagIsNotMultiChassis(0) The lag is not multi-chassis on the peer. localRemoteLagIdMismatch(1) Local - remote Lag ID mismatch with the peer. lagSelectionCriteriaMismatch(2) LAG selection criteria mismatch with the peer. lagEncapsulationMismatch(3) LAG Encapsulation mismatch with the peer. mcLacpkeyMismatch(4) MC lacp-key mismatch with the peer. mcSystemPriorityMismatch(5) MC system-priority mismatch with the peer. mcSystemIdMismatch(6) MC system-id mismatch with the peer." ::= { tnMcLagInfoLagEntry 6 } -- ------------------------------------------------ -- tnMcLagGlobalStats -- ------------------------------------------------ tnMcLagGlobalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TnMcLagGlobalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcLagGlobalStatsTable has an entry for the stats of each lag that participates in a multi-chassis configuration for the indicated peer." ::= { tnMcRedundancyStatsObjs 20 } tnMcLagGlobalStatsEntry OBJECT-TYPE SYNTAX TnMcLagGlobalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents stats data for a lag that participates in a multi-chassis configuration with a given peer. Rows are created or removed automatically by the system, each time a row is created or deleted in the tnMcLagConfigLagTable." INDEX { tnSysSwitchId } ::= { tnMcLagGlobalStatsTable 1 } TnMcLagGlobalStatsEntry ::= SEQUENCE { tnMcLagStatsPktsRx Counter32, tnMcLagStatsPktsRxKeepalive Counter32, tnMcLagStatsPktsRxConfig Counter32, tnMcLagStatsPktsRxPeerConfig Counter32, tnMcLagStatsPktsRxState Counter32, tnMcLagStatsDropPktKpaliveTask Counter32, tnMcLagStatsDropPktTooShort Counter32, tnMcLagStatsDropPktVerifyFaild Counter32, tnMcLagStatsDropTlvInvalidSize Counter32, tnMcLagStatsDropOutOfSeq Counter32, tnMcLagStatsDropUnknownTlv Counter32, tnMcLagStatsDropTlvInvldLagId Counter32, tnMcLagStatsDropMD5 Counter32, tnMcLagStatsDropUnknownPeer Counter32, tnMcLagStatsPktsTx Counter32, tnMcLagStatsPktsTxKeepalive Counter32, tnMcLagStatsPktsTxConfig Counter32, tnMcLagStatsPktsTxPeerConfig Counter32, tnMcLagStatsPktsTxState Counter32, tnMcLagStatsPktsTxFailed Counter32 } tnMcLagStatsPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsRx indicates how many MC-Lag control packets with valid authentication were received on this system." ::= { tnMcLagGlobalStatsEntry 1 } tnMcLagStatsPktsRxKeepalive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsRxKeepalive indicates how many valid MC-Lag control packets of type keepalive were received on this system." ::= { tnMcLagGlobalStatsEntry 2 } tnMcLagStatsPktsRxConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsRxConfig indicates how many valid MC-Lag control packets indicating the lag configuration were received on this system." ::= { tnMcLagGlobalStatsEntry 3 } tnMcLagStatsPktsRxPeerConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsRxPeerConfig indicates how many valid MC-Lag control packets indicating the peer configuration were received on this system." ::= { tnMcLagGlobalStatsEntry 4 } tnMcLagStatsPktsRxState OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsRxState indicates how many valid MC-Lag control packets indicating the lag state were received on this system." ::= { tnMcLagGlobalStatsEntry 5 } tnMcLagStatsDropPktKpaliveTask OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropPktKpaliveTask indicates how many MC-Lag control packets were dropped on this system because of invalid size, authentication or unknown peer." ::= { tnMcLagGlobalStatsEntry 6 } tnMcLagStatsDropPktTooShort OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropPktTooShort indicates how many MC-Lag control packets were dropped on this system because the packet was too small." ::= { tnMcLagGlobalStatsEntry 7 } tnMcLagStatsDropPktVerifyFaild OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropPktVerifyFaild indicates how many MC-Lag control packets were dropped on this system because of invalid formatting." ::= { tnMcLagGlobalStatsEntry 8 } tnMcLagStatsDropTlvInvalidSize OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropTlvInvalidSize indicates how many MC-Lag control packets were dropped on this system because of invalid size." ::= { tnMcLagGlobalStatsEntry 9 } tnMcLagStatsDropOutOfSeq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropOutOfSeq indicates how many MC-Lag control packets were dropped on this system because they were out of sequence." ::= { tnMcLagGlobalStatsEntry 10 } tnMcLagStatsDropUnknownTlv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropUnknownTlv indicates how many MC-Lag control packets were dropped on this system because they contained an unknown TLV." ::= { tnMcLagGlobalStatsEntry 11 } tnMcLagStatsDropTlvInvldLagId OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropTlvInvldLagId indicates how many MC-Lag control packets were dropped on this system because they refer to an invalid or non multi-chassis lag." ::= { tnMcLagGlobalStatsEntry 12 } tnMcLagStatsDropMD5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropMD5 indicates how many MC-Lag control packets were dropped on this system because they failed MD5 authentication." ::= { tnMcLagGlobalStatsEntry 13 } tnMcLagStatsDropUnknownPeer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsDropUnknownPeer indicates how many MC-Lag control packets were dropped on this system because they are coming from an unknown peer." ::= { tnMcLagGlobalStatsEntry 14 } tnMcLagStatsPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsTx indicates how many MC-Lag control packets were transmitted from this system." ::= { tnMcLagGlobalStatsEntry 15 } tnMcLagStatsPktsTxKeepalive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsTxKeepalive indicates how many MC-Lag control packets were transmitted from this system of type keepalive." ::= { tnMcLagGlobalStatsEntry 16 } tnMcLagStatsPktsTxConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsTxConfig indicates how many MC-Lag control packets were transmitted from this system of type lag config." ::= { tnMcLagGlobalStatsEntry 17 } tnMcLagStatsPktsTxPeerConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsTxPeerConfig indicates how many MC-Lag control packets were transmitted from this system of type peer config." ::= { tnMcLagGlobalStatsEntry 18 } tnMcLagStatsPktsTxState OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsTxState indicates how many MC-Lag control packets were transmitted from this system of type lag state." ::= { tnMcLagGlobalStatsEntry 19 } tnMcLagStatsPktsTxFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagStatsPktsTxFailed indicates how many MC-Lag control packets failed to be transmitted." ::= { tnMcLagGlobalStatsEntry 20 } -- ------------------------------------------------ -- tnMcLagPeerStatsTable table -- ------------------------------------------------ tnMcLagPeerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcLagPeerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcLagPeerStatsTable has an entry for each multi-chassis peer configured on this system." ::= { tnMcRedundancyStatsObjs 21 } tnMcLagPeerStatsEntry OBJECT-TYPE SYNTAX TmnxMcLagPeerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a multi-chassis peer. Entries cannot be created and deleted via SNMP SET operations." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr } ::= { tnMcLagPeerStatsTable 1 } TmnxMcLagPeerStatsEntry ::= SEQUENCE { tnMcLagPeerStatsPktsRx Counter32, tnMcLagPeerStatsPktsRxKpalive Counter32, tnMcLagPeerStatsPktsRxConfig Counter32, tnMcLagPeerStatsPktsRxPeerCfg Counter32, tnMcLagPeerStatsPktsRxState Counter32, tnMcLagPeerStatsDropStateDsbld Counter32, tnMcLagPeerStatsDropPktTooShrt Counter32, tnMcLagPeerStatsDropTlvInvldSz Counter32, tnMcLagPeerStatsDropTlvInvldId Counter32, tnMcLagPeerStatsDropOutOfSeq Counter32, tnMcLagPeerStatsDropUnknownTlv Counter32, tnMcLagPeerStatsDropMD5 Counter32, tnMcLagPeerStatsPktsTx Counter32, tnMcLagPeerStatsPktsTxKpalive Counter32, tnMcLagPeerStatsPktsTxPeerCfg Counter32, tnMcLagPeerStatsPktsTxFailed Counter32 } tnMcLagPeerStatsPktsRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsRx indicates how many valid MC-Lag control packets were received on this system from the peer." ::= { tnMcLagPeerStatsEntry 1 } tnMcLagPeerStatsPktsRxKpalive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsRxKpalive indicates how many valid MC-Lag control packets of type keepalive were received on this system from the peer." ::= { tnMcLagPeerStatsEntry 2 } tnMcLagPeerStatsPktsRxConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsRxConfig indicates how many valid MC-Lag control packets of type lag config were received on this system from the peer." ::= { tnMcLagPeerStatsEntry 3 } tnMcLagPeerStatsPktsRxPeerCfg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsRxPeerCfg indicates how many valid MC-Lag control packets of type peer config were received on this system from the peer." ::= { tnMcLagPeerStatsEntry 4 } tnMcLagPeerStatsPktsRxState OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsRxState indicates how many valid MC-Lag control packets of type lag state were received on this system from the peer." ::= { tnMcLagPeerStatsEntry 5 } tnMcLagPeerStatsDropStateDsbld OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropStateDsbld indicates how many MC-Lag control packets were dropped on this system from the peer because the peer was administratively disabled." ::= { tnMcLagPeerStatsEntry 6 } tnMcLagPeerStatsDropPktTooShrt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropPktTooShrt indicates how many MC-Lag control packets were dropped on this system from the peer because the packet was too short." ::= { tnMcLagPeerStatsEntry 7 } tnMcLagPeerStatsDropTlvInvldSz OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropTlvInvldSz indicates how many MC-Lag control packets were dropped on this system from the peer because the packet size was invalid." ::= { tnMcLagPeerStatsEntry 8 } tnMcLagPeerStatsDropTlvInvldId OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropTlvInvldId indicates how many MC-Lag control packets were dropped on this system from the peer because the packet referred to an invalid or non multi-chassis lag." ::= { tnMcLagPeerStatsEntry 9 } tnMcLagPeerStatsDropOutOfSeq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropOutOfSeq indicates how many MC-Lag control packets were dropped on this system from the peer because the packet was out of sequence." ::= { tnMcLagPeerStatsEntry 10 } tnMcLagPeerStatsDropUnknownTlv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropUnknownTlv indicates how many MC-Lag control packets were dropped on this system from the peer because the packet contained an unknown TLV." ::= { tnMcLagPeerStatsEntry 11 } tnMcLagPeerStatsDropMD5 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsDropMD5 indicates how many MC-Lag control packets were dropped on this system from the peer because the packet failed MD5 authentication." ::= { tnMcLagPeerStatsEntry 12 } tnMcLagPeerStatsPktsTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsTx indicates how many MC-Lag control packets were transmitted from this system to the peer." ::= { tnMcLagPeerStatsEntry 13 } tnMcLagPeerStatsPktsTxKpalive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsTxKpalive indicates how many MC-Lag control packets of type keepalive were transmitted from this system to the peer." ::= { tnMcLagPeerStatsEntry 14 } tnMcLagPeerStatsPktsTxPeerCfg OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsTxPeerCfg indicates how many MC-Lag control packets of type peer config were transmitted from this system to the peer." ::= { tnMcLagPeerStatsEntry 15 } tnMcLagPeerStatsPktsTxFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagPeerStatsPktsTxFailed indicates how many MC-Lag control packets failed to be transmitted from this system to the peer." ::= { tnMcLagPeerStatsEntry 16 } -- ------------------------------------------------ -- tnMcLagLagStatsTable table -- ------------------------------------------------ tnMcLagLagStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcLagLagStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcLagLagStatsTable has an entry for each lag that participates in a multi-chassis configuration for the indicated peer." ::= { tnMcRedundancyStatsObjs 22 } tnMcLagLagStatsEntry OBJECT-TYPE SYNTAX TmnxMcLagLagStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a lag that participates in a multi-chassis configuration with a given peer. Entries cannot be created and deleted via SNMP SET operations." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr, tnMcLagConfigLagId } ::= { tnMcLagLagStatsTable 1 } TmnxMcLagLagStatsEntry ::= SEQUENCE { tnMcLagLagStatsPktsRxConfig Counter32, tnMcLagLagStatsPktsRxState Counter32, tnMcLagLagStatsPktsTxConfig Counter32, tnMcLagLagStatsPktsTxState Counter32, tnMcLagLagStatsPktsTxFailed Counter32 } tnMcLagLagStatsPktsRxConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagLagStatsPktsRxConfig indicates how many MC-Lag control packets of type lag config were received on this system from the peer for this lag." ::= { tnMcLagLagStatsEntry 1 } tnMcLagLagStatsPktsRxState OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagLagStatsPktsRxState indicates how many MC-Lag control packets of type lag state were received on this system from the peer for this lag." ::= { tnMcLagLagStatsEntry 2 } tnMcLagLagStatsPktsTxConfig OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagLagStatsPktsTxConfig indicates how many MC-Lag control packets of type lag config were sent on this system to the peer for this lag." ::= { tnMcLagLagStatsEntry 3 } tnMcLagLagStatsPktsTxState OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagLagStatsPktsTxState indicates how many MC-Lag control packets of type lag state were sent on this system to the peer for this lag." ::= { tnMcLagLagStatsEntry 4 } tnMcLagLagStatsPktsTxFailed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcLagLagStatsPktsTxFailed indicates how many MC-Lag control packets failed to be transmitted on this system to the peer for this lag." ::= { tnMcLagLagStatsEntry 5 } -- ------------------------------------------------ -- tnMcPeerSyncStatsTable table -- ------------------------------------------------ tnMcPeerSyncStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcPeerSyncStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcPeerSyncStatsTable has an entry for each multi-chassis peer synchronization protocol entry." ::= { tnMcRedundancyStatsObjs 23 } tnMcPeerSyncStatsEntry OBJECT-TYPE SYNTAX TmnxMcPeerSyncStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a multi-chassis synchronization protocol entry. Entries cannot be created and deleted via SNMP SET operations." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr } ::= { tnMcPeerSyncStatsTable 1} TmnxMcPeerSyncStatsEntry ::= SEQUENCE { tnMcPeerSyncPktsTxAll Counter32, tnMcPeerSyncPktsTxHello Counter32, tnMcPeerSyncPktsTxData Counter32, tnMcPeerSyncPktsTxOther Counter32, tnMcPeerSyncPktsTxErr Counter32, tnMcPeerSyncPktsRxAll Counter32, tnMcPeerSyncPktsRxHello Counter32, tnMcPeerSyncPktsRxData Counter32, tnMcPeerSyncPktsRxOther Counter32, tnMcPeerSyncPktsRxErr Counter32, tnMcPeerSyncPktsRxErrHeader Counter32, tnMcPeerSyncPktsRxErrBody Counter32, tnMcPeerSyncPktsRxErrSeqNum Counter32 } tnMcPeerSyncPktsTxAll OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsTxAll indicates the total number of packets transmitted to the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 1 } tnMcPeerSyncPktsTxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsTxHello indicates the number of hello packets transmitted to the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 2 } tnMcPeerSyncPktsTxData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsTxData indicates the number of data packets transmitted to the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 3 } tnMcPeerSyncPktsTxOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsTxOther indicates the number of all other packet types transmitted to the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 4 } tnMcPeerSyncPktsTxErr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsTxErr indicates the number of packet transmission errors." ::= { tnMcPeerSyncStatsEntry 5 } tnMcPeerSyncPktsRxAll OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxAll indicates the total number of packets received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 6 } tnMcPeerSyncPktsRxHello OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxHello indicates the number of hello packets received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 7 } tnMcPeerSyncPktsRxData OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxData indicates the number of hello packets received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 8 } tnMcPeerSyncPktsRxOther OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxOther indicates the number of all other packet types received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 9 } tnMcPeerSyncPktsRxErr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxErr indicates the number of erroneous packets received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 10 } tnMcPeerSyncPktsRxErrHeader OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxErrHeader indicates the number of packets with header decode errors received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 11 } tnMcPeerSyncPktsRxErrBody OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxErrBody indicates the number of packets with body decode errors received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 12 } tnMcPeerSyncPktsRxErrSeqNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcPeerSyncPktsRxErrSeqNum indicates the number of packets with sequence number errors received from the multi-chassis peer." ::= { tnMcPeerSyncStatsEntry 13 } -- -- Dummy Scalars -- tnMcRedundancyStatsScalar1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item." ::= { tnMcRedundancyStatsObjs 101 } tnMcRedundancyStatsScalar2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "." ::= { tnMcRedundancyStatsObjs 102 } -- ------------------------------------------------ -- tnMcsClientAppTable table -- ------------------------------------------------ tnMcsClientAppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcsClientAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tnMcsClientAppTable has an entry for each application using the multi-chassis peer synchronization protocol configured on this system." ::= { tnMcRedundancyObjs 11 } tnMcsClientAppEntry OBJECT-TYPE SYNTAX TmnxMcsClientAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a particular multi-chassis peer synchronization protocol application. Entries cannot be created and deleted via SNMP SET operations." INDEX { tnSysSwitchId, tnMcPeerIpType, tnMcPeerIpAddr, tnMcsClientApplication } ::= { tnMcsClientAppTable 1} TmnxMcsClientAppEntry ::= SEQUENCE { tnMcsClientApplication TmnxMcsClientApp, tnMcsClientNumEntries Counter32, tnMcsClientLclDeletedEntries Counter32, tnMcsClientAlarmedEntries Counter32, tnMcsClientRemNumEntries Counter32, tnMcsClientRemLclDelEntries Counter32, tnMcsClientRemAlarmedEntries Counter32 } tnMcsClientApplication OBJECT-TYPE SYNTAX TmnxMcsClientApp MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcsClientApplication indicates the type of application using multi-chassis synchronization." ::= { tnMcsClientAppEntry 1 } tnMcsClientNumEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcsClientNumEntries indicates the total number of entries in the MCS database per multi-chassis peer for a particular application." ::= { tnMcsClientAppEntry 2 } tnMcsClientLclDeletedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcsClientLclDeletedEntries indicates the number of locally deleted entries in the MCS database per multi-chassis peer for a particular application. Locally deleted entries are entries that are not being used by the local MCS client application." ::= { tnMcsClientAppEntry 3 } tnMcsClientAlarmedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcsClientAlarmedEntries indicates the number of alarmed entries in the MCS database per multi-chassis peer for a particular application. Entries with an alarm are entries that are not being used by the local client application due to resource constraints." ::= { tnMcsClientAppEntry 4 } tnMcsClientRemNumEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcsClientRemNumEntries indicates the total number of entries in the MCS database on the multi-chassis peer for a particular application." ::= { tnMcsClientAppEntry 5 } tnMcsClientRemLclDelEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcsClientRemLclDelEntries indicates the number of locally deleted entries in the MCS database ont he multi-chassis peer for a particular application. Locally deleted entries are entries that are not being used by the remote MCS client application." ::= { tnMcsClientAppEntry 6 } tnMcsClientRemAlarmedEntries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tnMcsClientRemAlarmedEntries indicates the number of alarmed entries in the MCS database on the multi-chassis peer for a particular application. Entries with an alarm are entries that are not being used by the remote client application due to resource constraints." ::= { tnMcsClientAppEntry 7 } -- --------------------------------------------------------------------- -- tnMcDomainTable -- --------------------------------------------------------------------- tnMcDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMcDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains multi-chassis domain information." ::= { tnMcRedundancyObjs 91 } tnMcDomainEntry OBJECT-TYPE SYNTAX TmnxMcDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Multi-chassis domain information." INDEX { tnSysSwitchId, tnMcDomainId } ::= { tnMcDomainTable 1 } TmnxMcDomainEntry ::= SEQUENCE { tnMcDomainId Integer32, tnMcDomainRowStatus RowStatus, tnMcDomainDescription TItemDescription, tnMcDomainSrcIpType InetAddressType, tnMcDomainSrcIpAddr InetAddress, tnMcDomainSrcIpMask InetAddressPrefixLength, tnMcDomainSvcName TNamedItemOrEmpty } tnMcDomainId OBJECT-TYPE SYNTAX Integer32 (0|1..250) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tnMcDomainId specifies the ID of the multi-chassis domain." ::= { tnMcDomainEntry 1 } tnMcDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcDomainRowStatus specifies the row status of this row." ::= { tnMcDomainEntry 2 } tnMcDomainDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcDomainDescription specifies the description of the multi-chassis domain." DEFVAL { ''H } ::= { tnMcDomainEntry 3 } tnMcDomainSrcIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcDomainSrcIpType specifies the source address type of the multi-chassis domain." DEFVAL { unknown } ::= { tnMcDomainEntry 4 } tnMcDomainSrcIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcDomainSrcIpAddr specifies the source address of the multi-chassis domain." ::= { tnMcDomainEntry 5 } tnMcDomainSrcIpMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcDomainSrcIpMask specifies the source address mask of the multi-chassis domain." DEFVAL { 24 } ::= { tnMcDomainEntry 6 } tnMcDomainSvcName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tnMcDomainSvcName specifies the name of the service binding to the multi-chassis domain." DEFVAL { ''H } ::= { tnMcDomainEntry 7 } END