TIMETRA-WEB-PORTAL-PROTOCOL-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InetAddress, InetAddressType,
    InetPortNumber
                                                         FROM INET-ADDRESS-MIB
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Counter32, Gauge32, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    DisplayString, MacAddress, RowStatus,
    TEXTUAL-CONVENTION, TimeStamp,
    TruthValue
                                                         FROM SNMPv2-TC
    timetraSRMIBModules, tmnxSRConfs,
    tmnxSRNotifyPrefix, tmnxSRObjs
                                                         FROM TIMETRA-GLOBAL-MIB
    iesIfIndex, svcId
                                                         FROM TIMETRA-SERV-MIB
    tmnxSubIpoeIndex
                                                         FROM TIMETRA-SUBSCRIBER-MGMT-MIB
    TItemDescription, TNamedItem,
    TNamedItemOrEmpty, TmnxAdminState,
    TmnxEnabledDisabled, TmnxServId,
    TmnxVRtrIDOrZero
                                                         FROM TIMETRA-TC-MIB
    vRtrID
                                                         FROM TIMETRA-VRTR-MIB
    ;

timetraWppMIBModule              MODULE-IDENTITY
    LAST-UPDATED "201701010000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia 7xxx Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision the Web
         Portal Protocol for the Nokia 7xxx device.

         Copyright 2011-2018 Nokia. All rights reserved. Reproduction of this
         document is authorized on the condition that the foregoing copyright
         notice is included.

         This SNMP MIB module (Specification) embodies Nokia's proprietary
         intellectual property. Nokia retains all title and ownership in the
         Specification, including any revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied 'as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "201701010000Z"
    DESCRIPTION
        "Rev 15.0                01 Jan 2017 00:00
         15.0 release of the TIMETRA-WEB-PORTAL-PROTOCOL-MIB.mib."

    REVISION    "201401010000Z"
    DESCRIPTION
        "Rev 12.0                01 Jan 2014 00:00
         12.0 release of the TIMETRA-WEB-PORTAL-PROTOCOL-MIB.mib."

    REVISION    "201202280000Z"
    DESCRIPTION
        "Rev 10.0                28 Feb 2012 12:00
         10.0 release of the TIMETRA-WEB-PORTAL-PROTOCOL-MIB.mib."

    ::= { timetraSRMIBModules 80 }

TmnxWppStatsType                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxWppStatsType data type is an enumerated integer that describes
         the values used to identify the WPP statistics."
    SYNTAX      INTEGER {
        event                      (1),
        droppedMsgType             (2),
        acceptedMsgType            (3),
        originalTransmittedMsgType (4),
        retransmittedMsgType       (5),
        forwardedToPeerMsgType     (6),
        receivedFromPeerMsgType    (7)
    }

TmnxWppUserName                  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The data type TmnxWppUserName represents the user name of a WPP host."
    SYNTAX      DisplayString (SIZE (0..253))

tmnxWpp                          OBJECT IDENTIFIER ::= { tmnxSRObjs 80 }

tmnxWppObjs                      OBJECT IDENTIFIER ::= { tmnxWpp 1 }

tmnxWppPortalObjs                OBJECT IDENTIFIER ::= { tmnxWppObjs 1 }

tmnxWppPortalTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPortalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPortalTable contains objects to configure the WPP portals
         of this system."
    ::= { tmnxWppPortalObjs 1 }

tmnxWppPortalEntry               OBJECT-TYPE
    SYNTAX      TmnxWppPortalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents information about a particular WPP
         portal.

         Entries in this table can be created or deleted via SNMP operations.

         In order to create a conceptual row in this table, a row in the
         tmnxWppTable with the same value of the object vRtrID must exist."
    INDEX       {
        vRtrID,
        IMPLIED tmnxWppPortalName
    }
    ::= { tmnxWppPortalTable 1 }

TmnxWppPortalEntry               ::= SEQUENCE
{
    tmnxWppPortalName                TNamedItem,
    tmnxWppPortalLastCh              TimeStamp,
    tmnxWppPortalRowStatus           RowStatus,
    tmnxWppPortalAddrType            InetAddressType,
    tmnxWppPortalAddr                InetAddress,
    tmnxWppPortalAdminState          TmnxAdminState,
    tmnxWppPortalSecret              DisplayString,
    tmnxWppPortalVersion             Unsigned32,
    tmnxWppPortalRetryInterval       Unsigned32,
    tmnxWppPortalNtfLogoutRetries    Unsigned32,
    tmnxWppPortalAckAuthRetries      Unsigned32,
    tmnxWppPortalAckInfoPortFormat   INTEGER
}

tmnxWppPortalName                OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalName specifies the name of this WPP portal."
    ::= { tmnxWppPortalEntry 1 }

tmnxWppPortalLastCh              OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalLastCh indicates the sysUpTime at the time
         of the most recent management-initiated change to this table row."
    ::= { tmnxWppPortalEntry 2 }

tmnxWppPortalRowStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalRowStatus specifies the row status of this
         row."
    ::= { tmnxWppPortalEntry 3 }

tmnxWppPortalAddrType            OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalAddrType specifies the address type of
         tmnxWppPortalAddr.

         A value for this object must be specified when the row is created."
    ::= { tmnxWppPortalEntry 4 }

tmnxWppPortalAddr                OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalAddr specifies the IP address of the WPP
         portal.

         A value for this object must be specified when the row is created."
    ::= { tmnxWppPortalEntry 5 }

tmnxWppPortalAdminState          OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalAdminState specifies the administrative
         state of this WPP portal."
    DEFVAL      { outOfService }
    ::= { tmnxWppPortalEntry 6 }

tmnxWppPortalSecret              OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalSecret specifies the secret that is used by
         WPPv2 to authenticate the messages between portal and BRAS.

         A get request on this object always returns an empty string."
    DEFVAL      { ''H }
    ::= { tmnxWppPortalEntry 7 }

tmnxWppPortalVersion             OBJECT-TYPE
    SYNTAX      Unsigned32 (1 | 2)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalVersion specifies the protocol version that
         is expected by the WPP portal."
    DEFVAL      { 1 }
    ::= { tmnxWppPortalEntry 8 }

tmnxWppPortalRetryInterval       OBJECT-TYPE
    SYNTAX      Unsigned32 (10..2000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalRetryInterval specifies the time interval
         between two consecutive retransmissions."
    DEFVAL      { 2000 }
    ::= { tmnxWppPortalEntry 9 }

tmnxWppPortalNtfLogoutRetries    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..5)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalNtfLogoutRetries specifies the number of
         retransmissions of an NTF_LOGOUT message."
    DEFVAL      { 5 }
    ::= { tmnxWppPortalEntry 10 }

tmnxWppPortalAckAuthRetries      OBJECT-TYPE
    SYNTAX      Unsigned32 (0..5)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalAckAuthRetries specifies the number of
         retransmissions of an ACK_OUT message."
    DEFVAL      { 5 }
    ::= { tmnxWppPortalEntry 11 }

tmnxWppPortalAckInfoPortFormat   OBJECT-TYPE
    SYNTAX      INTEGER {
        standard       (1),
        vendorSpecific (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalAckInfoPortFormat specifies the formatting
         of the port attribute in the ACK_INFO WPP message.

         Some vendor-specific port types can only be represented  using the
         'vendorSpecific' formatting."
    DEFVAL      { standard }
    ::= { tmnxWppPortalEntry 12 }

tmnxWppPortalStatTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPortalStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPortalStatTable contains objects to monitor the WPP portals
         of this system."
    ::= { tmnxWppPortalObjs 2 }

tmnxWppPortalStatEntry           OBJECT-TYPE
    SYNTAX      TmnxWppPortalStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents status information about a particular
         WPP portal.

         Entries in this table are created and destroyed automatically by the
         system."
    AUGMENTS    { tmnxWppPortalEntry }
    ::= { tmnxWppPortalStatTable 1 }

TmnxWppPortalStatEntry           ::= SEQUENCE
{
    tmnxWppPortalStateControlledRtr  TmnxVRtrIDOrZero,
    tmnxWppPortalStateNumInterfaces  Gauge32,
    tmnxWppPortalStateTriggeredHosts TmnxEnabledDisabled
}

tmnxWppPortalStateControlledRtr  OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalStateControlledRtr indicates the identifier
         of the virtual router instance being controlled by this portal.

         The value zero indicates that this portal is currently not controlling
         any router instance."
    ::= { tmnxWppPortalStatEntry 1 }

tmnxWppPortalStateNumInterfaces  OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalStateNumInterfaces indicates the number of
         interfaces associated with this portal that are administratively
         enabled."
    ::= { tmnxWppPortalStatEntry 2 }

tmnxWppPortalStateTriggeredHosts OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalStateTriggeredHosts indicates whether
         triggered hosts are enabled on this portal.

         When tmnxWppPortalStateTriggeredHosts is enabled hosts are created
         when a host trigger is received from the WPP portal.

         When tmnxWppPortalStateTriggeredHosts is disabled, host triggers are
         ignored."
    ::= { tmnxWppPortalStatEntry 3 }

tmnxWppPortalStatsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPortalStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPortalStatsTable shows protocol statistics information of
         WPP portals."
    ::= { tmnxWppPortalObjs 3 }

tmnxWppPortalStatsEntry          OBJECT-TYPE
    SYNTAX      TmnxWppPortalStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents protocol statistics of a specific type.

         Entries in this table are created and destroyed by the system.

         Rows are only created where the statistics value is nonzero; this
         allows faster walking through this table; hence, it is recommended to
         perform only get-next-request operations to retrieve information from
         this table."
    INDEX       {
        vRtrID,
        tmnxWppPortalName,
        tmnxWppPortalStatsType,
        tmnxWppPortalStatsInstance
    }
    ::= { tmnxWppPortalStatsTable 1 }

TmnxWppPortalStatsEntry          ::= SEQUENCE
{
    tmnxWppPortalStatsType           TmnxWppStatsType,
    tmnxWppPortalStatsInstance       Unsigned32,
    tmnxWppPortalStatsName           DisplayString,
    tmnxWppPortalStatsVal            Counter32
}

tmnxWppPortalStatsType           OBJECT-TYPE
    SYNTAX      TmnxWppStatsType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppPortalStatsType indicates the type of
         WPP statistics contained in this conceptual row."
    ::= { tmnxWppPortalStatsEntry 1 }

tmnxWppPortalStatsInstance       OBJECT-TYPE
    SYNTAX      Unsigned32 (0..40)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppPortalStatsInstance indicates the
         instance identifier of the statistics contained in this conceptual
         row.

         Together with the value of tmnxWppPortalStatsType it indicates
         unambiguously what the value of tmnxWppPortalStatsVal means.

         For example: if the value of the object tmnxWppPortalStatsType is
         equal to 'event', the value of tmnxWppPortalStatsInstance indicates
         the identifier of the type of event that this conceptual row refers
         to, for example 'noResources', and the value of tmnxWppPortalStatsVal
         indicates the number of times a 'no resources' event occurred for this
         WPP portal."
    ::= { tmnxWppPortalStatsEntry 2 }

tmnxWppPortalStatsName           OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppPortalStatsName indicates the
         human-readable identifier of the statistics contained in this
         conceptual row.

         In the same example, the value of tmnxWppPortalStatsName is '(SCCRP)
         Start-Control-Connection-Reply'."
    ::= { tmnxWppPortalStatsEntry 3 }

tmnxWppPortalStatsVal            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppPortalStatsVal indicates the value of
         the statistics contained in this conceptual row."
    ::= { tmnxWppPortalStatsEntry 4 }

tmnxWppHostTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppHostTable contains status information about WPP hosts."
    ::= { tmnxWppPortalObjs 4 }

tmnxWppHostEntry                 OBJECT-TYPE
    SYNTAX      TmnxWppHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents information about a particular WPP
         host.

         Entries in this table are created and destroyed automatically by the
         system."
    INDEX       {
        vRtrID,
        tmnxWppPortalName,
        tmnxWppHostAddrType,
        tmnxWppHostAddr
    }
    ::= { tmnxWppHostTable 1 }

TmnxWppHostEntry                 ::= SEQUENCE
{
    tmnxWppHostAddrType              InetAddressType,
    tmnxWppHostAddr                  InetAddress,
    tmnxWppHostStatus                INTEGER,
    tmnxWppHostSerialNumber          Unsigned32,
    tmnxWppHostRequestId             Unsigned32,
    tmnxWppHostPortalRemotePort      InetPortNumber,
    tmnxWppHostPortalLclIpAddrType   InetAddressType,
    tmnxWppHostPortalLclIpAddr       InetAddress,
    tmnxWppHostUserName              TmnxWppUserName,
    tmnxWppHostService               TmnxServId,
    tmnxWppHostMacAddress            MacAddress,
    tmnxWppHostIsTriggered           TruthValue,
    tmnxWppHostTrackSrrpInst         Unsigned32,
    tmnxWppHostIsMCBackup            TruthValue
}

tmnxWppHostAddrType              OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostAddrType specifies the address type of
         tmnxWppHostAddr."
    ::= { tmnxWppHostEntry 1 }

tmnxWppHostAddr                  OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostAddr specifies the IP address of the WPP host."
    ::= { tmnxWppHostEntry 2 }

tmnxWppHostStatus                OBJECT-TYPE
    SYNTAX      INTEGER {
        idle           (1),
        challenged     (2),
        authenticating (3),
        authenticated  (4),
        established    (5),
        loggingOut     (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostStatus indicates the state of the WPP host."
    ::= { tmnxWppHostEntry 3 }

tmnxWppHostSerialNumber          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostSerialNumber indicates the serial number of
         the WPP host.

         The value zero indicates that the serial number is unknown or
         irrelevant."
    ::= { tmnxWppHostEntry 4 }

tmnxWppHostRequestId             OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostRequestId indicates the request ID of the WPP
         host.

         The value zero indicates that the request ID is unknown or irrelevant."
    ::= { tmnxWppHostEntry 5 }

tmnxWppHostPortalRemotePort      OBJECT-TYPE
    SYNTAX      InetPortNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostPortalRemotePort indicates the UDP source port
         used by the portal while sending WPP protocol messages about this host
         to this system.

         The value zero indicates that the port is not yet known."
    ::= { tmnxWppHostEntry 6 }

tmnxWppHostPortalLclIpAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostPortalLclIpAddrType indicates the address type
         of tmnxWppHostPortalLclIpAddr."
    ::= { tmnxWppHostEntry 7 }

tmnxWppHostPortalLclIpAddr       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostPortalLclIpAddr indicates the destination IP
         address used by the portal while sending WPP protocol messages about
         this host to this system."
    ::= { tmnxWppHostEntry 8 }

tmnxWppHostUserName              OBJECT-TYPE
    SYNTAX      TmnxWppUserName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostUserName indicates the WPP user name of this
         WPP host."
    ::= { tmnxWppHostEntry 9 }

tmnxWppHostService               OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostService indicates the service ID of the
         service to which this WPP host belongs."
    ::= { tmnxWppHostEntry 10 }

tmnxWppHostMacAddress            OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostMacAddress indicates the MAC address of this
         WPP host."
    ::= { tmnxWppHostEntry 11 }

tmnxWppHostIsTriggered           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostIsTriggered indicates whether the creation of
         the host is triggered by the portal.

         If the host creation is not triggered by the portal, the
         tmnxWppHostIsTriggered value is FALSE."
    ::= { tmnxWppHostEntry 12 }

tmnxWppHostTrackSrrpInst         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostTrackSrrpInst indicates the SRRP instance
         whose state is tracked by this WPP host to determine if it is on the
         MCS master or backup node."
    ::= { tmnxWppHostEntry 13 }

tmnxWppHostIsMCBackup            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppHostIsMCBackup indicates whether the WPP host is
         on the MCS backup node or not."
    ::= { tmnxWppHostEntry 14 }

tmnxWppSessTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppSessEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppSessTable contains status information about WPP sessions."
    ::= { tmnxWppPortalObjs 5 }

tmnxWppSessEntry                 OBJECT-TYPE
    SYNTAX      TmnxWppSessEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents information about a particular WPP
         session. Entries in this table are created and destroyed automatically
         by the system."
    INDEX       {
        vRtrID,
        tmnxWppPortalName,
        tmnxSubIpoeIndex
    }
    ::= { tmnxWppSessTable 1 }

TmnxWppSessEntry                 ::= SEQUENCE
{
    tmnxWppSessStatus                INTEGER,
    tmnxWppSessSerialNumber          Unsigned32,
    tmnxWppSessRequestId             Unsigned32,
    tmnxWppSessPortalRemotePort      InetPortNumber,
    tmnxWppSessPortalLclIpAddrType   InetAddressType,
    tmnxWppSessPortalLclIpAddr       InetAddress,
    tmnxWppSessUserName              TmnxWppUserName,
    tmnxWppSessService               TmnxServId,
    tmnxWppSessMacAddress            MacAddress,
    tmnxWppSessIsTriggered           TruthValue,
    tmnxWppSessTrackSrrpInst         Unsigned32,
    tmnxWppSessIsMCBackup            TruthValue,
    tmnxWppSessClientAddrType        InetAddressType,
    tmnxWppSessClientAddr            InetAddress
}

tmnxWppSessStatus                OBJECT-TYPE
    SYNTAX      INTEGER {
        idle           (1),
        challenged     (2),
        authenticating (3),
        authenticated  (4),
        established    (5),
        loggingOut     (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessStatus indicates the state of the WPP session."
    ::= { tmnxWppSessEntry 1 }

tmnxWppSessSerialNumber          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessSerialNumber indicates the serial number of
         the WPP session.

         The value zero indicates that the serial number is unknown or
         irrelevant."
    ::= { tmnxWppSessEntry 2 }

tmnxWppSessRequestId             OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessRequestId indicates the request ID of the WPP
         session.

         The value zero indicates that the request ID is unknown or irrelevant."
    ::= { tmnxWppSessEntry 3 }

tmnxWppSessPortalRemotePort      OBJECT-TYPE
    SYNTAX      InetPortNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessPortalRemotePort indicates the UDP source port
         used by the portal while sending WPP protocol messages about this
         session to this system.

         The value zero indicates that the port is not yet known."
    ::= { tmnxWppSessEntry 4 }

tmnxWppSessPortalLclIpAddrType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessPortalLclIpAddrType indicates the address type
         of tmnxWppSessPortalLclIpAddr."
    ::= { tmnxWppSessEntry 5 }

tmnxWppSessPortalLclIpAddr       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessPortalLclIpAddr indicates the destination IP
         address used by the portal while sending WPP protocol messages about
         this session to this system."
    ::= { tmnxWppSessEntry 6 }

tmnxWppSessUserName              OBJECT-TYPE
    SYNTAX      TmnxWppUserName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessUserName indicates the WPP user name of this
         WPP session."
    ::= { tmnxWppSessEntry 7 }

tmnxWppSessService               OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessService indicates the service ID of the
         service to which this WPP session belongs."
    ::= { tmnxWppSessEntry 8 }

tmnxWppSessMacAddress            OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessMacAddress indicates the MAC address of this
         WPP session."
    ::= { tmnxWppSessEntry 9 }

tmnxWppSessIsTriggered           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessIsTriggered indicates whether the creation of
         the session is triggered by the portal.

         If the session creation is not triggered by the portal, the
         tmnxWppSessIsTriggered value is FALSE."
    ::= { tmnxWppSessEntry 10 }

tmnxWppSessTrackSrrpInst         OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessTrackSrrpInst indicates the SRRP instance
         whose state is tracked by this WPP session to determine if it is on
         the MCS master or backup node."
    ::= { tmnxWppSessEntry 11 }

tmnxWppSessIsMCBackup            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessIsMCBackup indicates whether the WPP session
         is on the MCS backup node or not."
    ::= { tmnxWppSessEntry 12 }

tmnxWppSessClientAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessClientAddrType specifies the address type of
         tmnxWppSessClientAddr."
    ::= { tmnxWppSessEntry 13 }

tmnxWppSessClientAddr            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSessClientAddr specifies the source address the
         client used to contact the WPP portal."
    ::= { tmnxWppSessEntry 14 }

tmnxWppTable                     OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppTable allows configuration of the Web Portal Protocol (WPP)
         in a virtual router instance."
    ::= { tmnxWppObjs 2 }

tmnxWppEntry                     OBJECT-TYPE
    SYNTAX      TmnxWppEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry represents the configuration for WPP in a particular
         virtual router instance.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxWppRowStatus.

         A corresponding row in the TIMETRA-VRTR-MIB::vRtrConfTable must exist
         in order to create a row in this table."
    INDEX       { vRtrID }
    ::= { tmnxWppTable 1 }

TmnxWppEntry                     ::= SEQUENCE
{
    tmnxWppRowStatus                 RowStatus,
    tmnxWppLastCh                    TimeStamp,
    tmnxWppAdminState                TmnxAdminState
}

tmnxWppRowStatus                 OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppRowStatus controls the creation and deletion of
         rows in the table."
    ::= { tmnxWppEntry 1 }

tmnxWppLastCh                    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppLastCh indicates the sysUpTime at the time of the
         most recent management-initiated change to this WPP portal."
    ::= { tmnxWppEntry 2 }

tmnxWppAdminState                OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppAdminState specifies the administrative state of
         the WPP in this virtual router instance."
    DEFVAL      { outOfService }
    ::= { tmnxWppEntry 3 }

tmnxWppStatsTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppStatsTable shows WPP statistics."
    ::= { tmnxWppObjs 3 }

tmnxWppStatsEntry                OBJECT-TYPE
    SYNTAX      TmnxWppStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents protocol statistics of a specific type.

         Entries in this table are created and destroyed by the system.

         Rows are only created where the statistics value is nonzero; this
         allows faster walking through this table; hence, it is recommended to
         perform only get-next-request operations to retrieve information from
         this table."
    INDEX       {
        vRtrID,
        tmnxWppStatsType,
        tmnxWppStatsInstance
    }
    ::= { tmnxWppStatsTable 1 }

TmnxWppStatsEntry                ::= SEQUENCE
{
    tmnxWppStatsType                 TmnxWppStatsType,
    tmnxWppStatsInstance             Unsigned32,
    tmnxWppStatsName                 DisplayString,
    tmnxWppStatsVal                  Counter32
}

tmnxWppStatsType                 OBJECT-TYPE
    SYNTAX      TmnxWppStatsType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppStatsType indicates the type of WPP
         statistics contained in this conceptual row."
    ::= { tmnxWppStatsEntry 1 }

tmnxWppStatsInstance             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..40)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppStatsInstance indicates the instance
         identifier of the statistics contained in this conceptual row.

         Together with the value of tmnxWppStatsType it indicates unambiguously
         what the value of tmnxWppStatsVal means.

         For example: if the value of the object tmnxWppStatsType is equal to
         'event', the value of tmnxWppStatsInstance indicates the identifier of
         the type of event that this conceptual row refers to, for example
         'noResources', and the value of tmnxWppStatsVal indicates the number
         of times a 'no resources' event occurred for this WPP portal."
    ::= { tmnxWppStatsEntry 2 }

tmnxWppStatsName                 OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppStatsName indicates the human-readable
         identifier of the statistics contained in this conceptual row.

         In the same example, the value of tmnxWppStatsName is '(SCCRP)
         Start-Control-Connection-Reply'."
    ::= { tmnxWppStatsEntry 3 }

tmnxWppStatsVal                  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppStatsVal indicates the value of the
         statistics contained in this conceptual row."
    ::= { tmnxWppStatsEntry 4 }

tmnxWppIfTable                   OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppIfTable contains objects to configure the WPP for the IES
         group interfaces of this system."
    ::= { tmnxWppObjs 4 }

tmnxWppIfEntry                   OBJECT-TYPE
    SYNTAX      TmnxWppIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents WPP information about a particular IES
         group interface.

         Entries in this table can be created or deleted via SNMP operations.

         In order to create a conceptual row in this table, a row in the
         TIMETRA-SERV-MIB::iesGrpIfTable with the same index must exist."
    INDEX       {
        svcId,
        iesIfIndex
    }
    ::= { tmnxWppIfTable 1 }

TmnxWppIfEntry                   ::= SEQUENCE
{
    tmnxWppIfLastCh                  TimeStamp,
    tmnxWppIfRowStatus               RowStatus,
    tmnxWppIfAdminState              TmnxAdminState,
    tmnxWppIfPortalRouter            TmnxVRtrIDOrZero,
    tmnxWppIfPortalName              TNamedItemOrEmpty,
    tmnxWppIfSubProfile              TNamedItemOrEmpty,
    tmnxWppIfSLAProfile              TNamedItemOrEmpty,
    tmnxWppIfAppProfile              TNamedItemOrEmpty,
    tmnxWppIfRestoreDisconnected     TruthValue,
    tmnxWppIfUserDb                  TNamedItemOrEmpty,
    tmnxWppIfLeaseTime               Unsigned32,
    tmnxWppIfEnableTriggeredHosts    TruthValue,
    tmnxWppIfPortalGroupName         TNamedItemOrEmpty
}

tmnxWppIfLastCh                  OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfLastCh indicates the sysUpTime at the time of
         the most recent management-initiated change to this table row."
    ::= { tmnxWppIfEntry 1 }

tmnxWppIfRowStatus               OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfRowStatus specifies the row status of this row."
    ::= { tmnxWppIfEntry 2 }

tmnxWppIfAdminState              OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfAdminState specifies the administrative state of
         the WPP for hosts using this IES group interface."
    DEFVAL      { outOfService }
    ::= { tmnxWppIfEntry 3 }

tmnxWppIfPortalRouter            OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfPortalRouter specifies the virtual router
         instance ID of the WPP portal for the hosts using this IES group
         interface.

         An corresponding row must exist in the
         TIMETRA-VRTR-MIB::vRtrConfTable.

         When that row is removed while the value of tmnxWppIfAdminState is
         equal to outOfService, the system resets the value of this object to
         its default value, zero, and the value of tmnxWppIfPortalName to
         empty.

         A row corresponding to tmnxWppIfPortalRouter and tmnxWppIfPortalName
         must exist in the tmnxWppPortalTable while the value of
         tmnxWppIfAdminState is equal to 'inService'.

         The values of the objects tmnxWppIfPortalRouter and
         tmnxWppIfPortalName must be either both equal to their default values
         (zero/empty) or both not equal to their default values."
    DEFVAL      { 0 }
    ::= { tmnxWppIfEntry 4 }

tmnxWppIfPortalName              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfPortalName specifies the name of the WPP portal
         for the hosts using this IES group interface.

         A row corresponding to tmnxWppIfPortalRouter and tmnxWppIfPortalName
         must exist in the tmnxWppPortalTable while the value of
         tmnxWppIfAdminState is equal to 'inService'.

         The values of the objects tmnxWppIfPortalRouter and
         tmnxWppIfPortalName must be either both equal to their default values
         (zero/empty) or both not equal to their default values."
    DEFVAL      { ''H }
    ::= { tmnxWppIfEntry 5 }

tmnxWppIfSubProfile              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfSubProfile specifies the initial subscriber
         profile, to be used during the WPP authentication phase of hosts using
         this IES group interface."
    DEFVAL      { ''H }
    ::= { tmnxWppIfEntry 6 }

tmnxWppIfSLAProfile              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfSLAProfile specifies the initial SLA profile, to
         be used during the WPP authentication phase of hosts using this IES
         group interface."
    DEFVAL      { ''H }
    ::= { tmnxWppIfEntry 7 }

tmnxWppIfAppProfile              OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfAppProfile specifies the initial application
         profile, to be used during the WPP authentication phase of hosts using
         this IES group interface.

         The application profile is configured in
         TIMETRA-BSX-NG-MIB.mib::tmnxBsxAppProfTable."
    DEFVAL      { ''H }
    ::= { tmnxWppIfEntry 8 }

tmnxWppIfRestoreDisconnected     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfRestoreDisconnected specifies if the initial
         profiles must be restored after a host has disconnected."
    DEFVAL      { true }
    ::= { tmnxWppIfEntry 9 }

tmnxWppIfUserDb                  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfUserDb specifies the user database that will be
         used to retrieve the WPP information for the hosts using this IES
         group interface.

         If tmnxWppIfUserDb is configured, the WPP information configured on
         this particular IES group interface is only used in case no
         corresponding value is returned from LUDB lookup."
    DEFVAL      { ''H }
    ::= { tmnxWppIfEntry 10 }

tmnxWppIfLeaseTime               OBJECT-TYPE
    SYNTAX      Unsigned32 (10..315446399)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppIfLeaseTime specifies, in seconds, the
         lease time of hosts using this IES group interface."
    DEFVAL      { 600 }
    ::= { tmnxWppIfEntry 11 }

tmnxWppIfEnableTriggeredHosts    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppIfEnableTriggeredHosts specifies
         whether triggered hosts are enabled on this IES group interface.

         When tmnxWppIfEnableTriggeredHosts is set to true hosts are created
         when a host trigger is received from the WPP portal.

         When tmnxWppIfEnableTriggeredHosts is set to false, host triggers are
         ignored.

         The value 'true' is only effective if this interface is associated
         with a port where on one of its SAPs, a row can be created in the
         TIMETRA-SAP-MIB::sapDefHostTable."
    DEFVAL      { false }
    ::= { tmnxWppIfEntry 12 }

tmnxWppIfPortalGroupName         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppIfPortalGroupName specifies the name of the WPP
         portal group."
    DEFVAL      { ''H }
    ::= { tmnxWppIfEntry 13 }

tmnxWppPortalGroupTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPortalGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPortalGroupTable contains the objects to configure the WPP
         portal groups."
    ::= { tmnxWppObjs 5 }

tmnxWppPortalGroupEntry          OBJECT-TYPE
    SYNTAX      TmnxWppPortalGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents the configuration of a particular WPP
         portal group."
    INDEX       { IMPLIED tmnxWppPortalGroupName }
    ::= { tmnxWppPortalGroupTable 1 }

TmnxWppPortalGroupEntry          ::= SEQUENCE
{
    tmnxWppPortalGroupName           TNamedItem,
    tmnxWppPortalGroupLastCh         TimeStamp,
    tmnxWppPortalGroupRowStatus      RowStatus,
    tmnxWppPortalGroupDescription    TItemDescription,
    tmnxWppPortalGroupAdminState     TmnxAdminState
}

tmnxWppPortalGroupName           OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupName specifies the name of the WPP
         portal group."
    ::= { tmnxWppPortalGroupEntry 1 }

tmnxWppPortalGroupLastCh         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupLastCh indicates the sysUpTime at the
         time of the most recent management-initiated change to the WPP portal
         group."
    ::= { tmnxWppPortalGroupEntry 2 }

tmnxWppPortalGroupRowStatus      OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupRowStatus controls the creation and
         deletion of rows in the table."
    ::= { tmnxWppPortalGroupEntry 3 }

tmnxWppPortalGroupDescription    OBJECT-TYPE
    SYNTAX      TItemDescription
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupDescription specifies a user provided
         description for the WPP portal group."
    DEFVAL      { "" }
    ::= { tmnxWppPortalGroupEntry 4 }

tmnxWppPortalGroupAdminState     OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupAdminState specifies the administrative
         state of the WPP portal group."
    DEFVAL      { outOfService }
    ::= { tmnxWppPortalGroupEntry 5 }

tmnxWppPortalGroupPortalTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPortalGroupPortalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPortalGroupPortalTable contains the objects to configure
         the portals which are part of the WPP portal groups."
    ::= { tmnxWppObjs 6 }

tmnxWppPortalGroupPortalEntry    OBJECT-TYPE
    SYNTAX      TmnxWppPortalGroupPortalEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents the configuration of a particular
         portal which is part of a WPP portal group."
    INDEX       {
        tmnxWppPortalGroupName,
        vRtrID,
        IMPLIED tmnxWppPortalGroupPortalName
    }
    ::= { tmnxWppPortalGroupPortalTable 1 }

TmnxWppPortalGroupPortalEntry    ::= SEQUENCE
{
    tmnxWppPortalGroupPortalName     TNamedItem,
    tmnxWppPortalGroupPortalLastCh   TimeStamp,
    tmnxWppPortalGroupPortalRowStat  RowStatus
}

tmnxWppPortalGroupPortalName     OBJECT-TYPE
    SYNTAX      TNamedItem
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupPortalName specifies the name of the
         portal which is part of a WPP portal group."
    ::= { tmnxWppPortalGroupPortalEntry 1 }

tmnxWppPortalGroupPortalLastCh   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupPortalLastCh indicates the sysUpTime at
         the time of the most recent management-initiated change to the portal
         configuration."
    ::= { tmnxWppPortalGroupPortalEntry 2 }

tmnxWppPortalGroupPortalRowStat  OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupPortalRowStat controls the creation and
         deletion of rows in the table."
    ::= { tmnxWppPortalGroupPortalEntry 3 }

tmnxWppPortalGroupStatTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPortalGroupStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPortalGroupStatTable contains objects to monitor the WPP
         portal groups of this system."
    ::= { tmnxWppObjs 7 }

tmnxWppPortalGroupStatEntry      OBJECT-TYPE
    SYNTAX      TmnxWppPortalGroupStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents status information about a particular
         WPP portal group.

         Entries in this table are created and destroyed automatically by the
         system."
    AUGMENTS    { tmnxWppPortalGroupEntry }
    ::= { tmnxWppPortalGroupStatTable 1 }

TmnxWppPortalGroupStatEntry      ::= SEQUENCE
{
    tmnxWppPortalGroupStateContrRtr  TmnxVRtrIDOrZero,
    tmnxWppPortalGroupStateNumItfs   Gauge32,
    tmnxWppPortalGroupStateTrigHosts TmnxEnabledDisabled
}

tmnxWppPortalGroupStateContrRtr  OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupStateContrRtr indicates the identifier
         of the virtual router instance being controlled by this portal group.

         The value zero indicates that this portal group is currently not
         controlling any router instance."
    ::= { tmnxWppPortalGroupStatEntry 1 }

tmnxWppPortalGroupStateNumItfs   OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupStateNumItfs indicates the number of
         interfaces associated with this portal group that are administratively
         enabled."
    ::= { tmnxWppPortalGroupStatEntry 2 }

tmnxWppPortalGroupStateTrigHosts OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPortalGroupStateTrigHosts indicates whether
         triggered hosts are enabled on this portal group.

         When tmnxWppPortalGroupStateTrigHosts is enabled, hosts are created
         when a host trigger is received from the WPP portal group.

         When tmnxWppPortalGroupStateTrigHosts is disabled, host triggers are
         ignored."
    ::= { tmnxWppPortalGroupStatEntry 3 }

tmnxWppPGHostTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPGHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPGHostTable contains status information about WPP portal
         group hosts."
    ::= { tmnxWppObjs 8 }

tmnxWppPGHostEntry               OBJECT-TYPE
    SYNTAX      TmnxWppPGHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents information about a particular WPP
         portal group host.

         Entries in this table are created and destroyed automatically by the
         system."
    INDEX       {
        tmnxWppPortalGroupName,
        tmnxWppPGHostAddrType,
        tmnxWppPGHostAddr
    }
    ::= { tmnxWppPGHostTable 1 }

TmnxWppPGHostEntry               ::= SEQUENCE
{
    tmnxWppPGHostAddrType            InetAddressType,
    tmnxWppPGHostAddr                InetAddress,
    tmnxWppPGHostStatus              INTEGER,
    tmnxWppPGHostSerialNumber        Unsigned32,
    tmnxWppPGHostRequestId           Unsigned32,
    tmnxWppPGHostPortalRemotePort    InetPortNumber,
    tmnxWppPGHostPortalLclIpAddrType InetAddressType,
    tmnxWppPGHostPortalLclIpAddr     InetAddress,
    tmnxWppPGHostUserName            TmnxWppUserName,
    tmnxWppPGHostService             TmnxServId,
    tmnxWppPGHostMacAddress          MacAddress,
    tmnxWppPGHostIsTriggered         TruthValue,
    tmnxWppPGHostTrackSrrpInst       Unsigned32,
    tmnxWppPGHostIsMCBackup          TruthValue,
    tmnxWppPGHostActivePortalRouter  TmnxVRtrIDOrZero,
    tmnxWppPGHostActivePortalName    TNamedItemOrEmpty
}

tmnxWppPGHostAddrType            OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostAddrType specifies the address type of
         tmnxWppPGHostAddr."
    ::= { tmnxWppPGHostEntry 1 }

tmnxWppPGHostAddr                OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostAddr specifies the IP address of the WPP
         portal group host."
    ::= { tmnxWppPGHostEntry 2 }

tmnxWppPGHostStatus              OBJECT-TYPE
    SYNTAX      INTEGER {
        idle           (1),
        challenged     (2),
        authenticating (3),
        authenticated  (4),
        established    (5),
        loggingOut     (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostStatus indicates the state of the WPP portal
         group host."
    ::= { tmnxWppPGHostEntry 3 }

tmnxWppPGHostSerialNumber        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostSerialNumber indicates the serial number of
         the WPP portal group host.

         The value zero indicates that the serial number is unknown or
         irrelevant."
    ::= { tmnxWppPGHostEntry 4 }

tmnxWppPGHostRequestId           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostRequestId indicates the request ID of the
         WPP portal group host.

         The value zero indicates that the request ID is unknown or irrelevant."
    ::= { tmnxWppPGHostEntry 5 }

tmnxWppPGHostPortalRemotePort    OBJECT-TYPE
    SYNTAX      InetPortNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostPortalRemotePort indicates the UDP source
         port used by the portal group while sending WPP protocol messages
         about this host to this system.

         The value zero indicates that the port is not yet known."
    ::= { tmnxWppPGHostEntry 6 }

tmnxWppPGHostPortalLclIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostPortalLclIpAddrType indicates the address
         type of tmnxWppPGHostPortalLclIpAddr."
    ::= { tmnxWppPGHostEntry 7 }

tmnxWppPGHostPortalLclIpAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostPortalLclIpAddr indicates the destination IP
         address used by the portal while sending WPP protocol messages about
         this host to this system."
    ::= { tmnxWppPGHostEntry 8 }

tmnxWppPGHostUserName            OBJECT-TYPE
    SYNTAX      TmnxWppUserName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostUserName indicates the WPP user name of this
         WPP portal group host."
    ::= { tmnxWppPGHostEntry 9 }

tmnxWppPGHostService             OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostService indicates the service ID of the
         service to which this WPP portal group host belongs."
    ::= { tmnxWppPGHostEntry 10 }

tmnxWppPGHostMacAddress          OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostMacAddress indicates the MAC address of this
         WPP portal group host."
    ::= { tmnxWppPGHostEntry 11 }

tmnxWppPGHostIsTriggered         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostIsTriggered indicates whether the creation
         of the host is triggered by the portal group.

         If the host creation is not triggered by the portal group, the
         tmnxWppPGHostIsTriggered value is FALSE."
    ::= { tmnxWppPGHostEntry 12 }

tmnxWppPGHostTrackSrrpInst       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostTrackSrrpInst indicates the SRRP instance
         whose state is tracked by this WPP portal group host to determine if
         it is on the MCS master or backup node."
    ::= { tmnxWppPGHostEntry 13 }

tmnxWppPGHostIsMCBackup          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostIsMCBackup indicates whether the WPP portal
         group host is on the MCS backup node or not."
    ::= { tmnxWppPGHostEntry 14 }

tmnxWppPGHostActivePortalRouter  OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostActivePortalRouter indicates the router of
         the active portal.

         This value is only applicable when tmnxWppPGHostStatus is
         'authenticating' or 'loggingOut'."
    ::= { tmnxWppPGHostEntry 15 }

tmnxWppPGHostActivePortalName    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGHostActivePortalName indicates the portal name
         of the active portal.

         This value is only applicable when tmnxWppPGHostStatus is
         'authenticating' or 'loggingOut'."
    ::= { tmnxWppPGHostEntry 16 }

tmnxWppPGSessTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxWppPGSessEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxWppPGSessTable contains status information about WPP portal
         group sessions."
    ::= { tmnxWppObjs 9 }

tmnxWppPGSessEntry               OBJECT-TYPE
    SYNTAX      TmnxWppPGSessEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row represents information about a particular WPP
         portal group session.

         Entries in this table are created and destroyed automatically by the
         system."
    INDEX       {
        tmnxWppPortalGroupName,
        tmnxSubIpoeIndex
    }
    ::= { tmnxWppPGSessTable 1 }

TmnxWppPGSessEntry               ::= SEQUENCE
{
    tmnxWppPGSessStatus              INTEGER,
    tmnxWppPGSessSerialNumber        Unsigned32,
    tmnxWppPGSessRequestId           Unsigned32,
    tmnxWppPGSessPortalRemotePort    InetPortNumber,
    tmnxWppPGSessPortalLclIpAddrType InetAddressType,
    tmnxWppPGSessPortalLclIpAddr     InetAddress,
    tmnxWppPGSessUserName            TmnxWppUserName,
    tmnxWppPGSessService             TmnxServId,
    tmnxWppPGSessMacAddress          MacAddress,
    tmnxWppPGSessIsTriggered         TruthValue,
    tmnxWppPGSessTrackSrrpInst       Unsigned32,
    tmnxWppPGSessIsMCBackup          TruthValue,
    tmnxWppPGSessActivePortalRouter  TmnxVRtrIDOrZero,
    tmnxWppPGSessActivePortalName    TNamedItemOrEmpty,
    tmnxWppPGSessClientAddrType      InetAddressType,
    tmnxWppPGSessClientAddr          InetAddress
}

tmnxWppPGSessStatus              OBJECT-TYPE
    SYNTAX      INTEGER {
        idle           (1),
        challenged     (2),
        authenticating (3),
        authenticated  (4),
        established    (5),
        loggingOut     (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessStatus indicates the state of the WPP portal
         group session."
    ::= { tmnxWppPGSessEntry 1 }

tmnxWppPGSessSerialNumber        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessSerialNumber indicates the serial number of
         the WPP portal group session.

         The value zero indicates that the serial number is unknown or
         irrelevant."
    ::= { tmnxWppPGSessEntry 2 }

tmnxWppPGSessRequestId           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessRequestId indicates the request ID of the
         WPP portal group session.

         The value zero indicates that the request ID is unknown or irrelevant."
    ::= { tmnxWppPGSessEntry 3 }

tmnxWppPGSessPortalRemotePort    OBJECT-TYPE
    SYNTAX      InetPortNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessPortalRemotePort indicates the UDP source
         port used by the portal group while sending WPP protocol messages
         about this session to this system.

         The value zero indicates that the port is not yet known."
    ::= { tmnxWppPGSessEntry 4 }

tmnxWppPGSessPortalLclIpAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessPortalLclIpAddrType indicates the address
         type of tmnxWppPGSessPortalLclIpAddr."
    ::= { tmnxWppPGSessEntry 5 }

tmnxWppPGSessPortalLclIpAddr     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessPortalLclIpAddr indicates the destination IP
         address used by the portal while sending WPP protocol messages about
         this session to this system."
    ::= { tmnxWppPGSessEntry 6 }

tmnxWppPGSessUserName            OBJECT-TYPE
    SYNTAX      TmnxWppUserName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessUserName indicates the WPP user name of this
         WPP portal group session."
    ::= { tmnxWppPGSessEntry 7 }

tmnxWppPGSessService             OBJECT-TYPE
    SYNTAX      TmnxServId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessService indicates the service ID of the
         service to which this WPP portal group session belongs."
    ::= { tmnxWppPGSessEntry 8 }

tmnxWppPGSessMacAddress          OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessMacAddress indicates the MAC address of this
         WPP portal group session."
    ::= { tmnxWppPGSessEntry 9 }

tmnxWppPGSessIsTriggered         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessIsTriggered indicates whether the creation
         of the session is triggered by the portal group.

         If the session creation is not triggered by the portal group, the
         tmnxWppPGSessIsTriggered value is FALSE."
    ::= { tmnxWppPGSessEntry 10 }

tmnxWppPGSessTrackSrrpInst       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessTrackSrrpInst indicates the SRRP instance
         whose state is tracked by this WPP portal group session to determine
         if it is on the MCS master or backup node."
    ::= { tmnxWppPGSessEntry 11 }

tmnxWppPGSessIsMCBackup          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessIsMCBackup indicates whether the WPP portal
         group session is on the MCS backup node or not."
    ::= { tmnxWppPGSessEntry 12 }

tmnxWppPGSessActivePortalRouter  OBJECT-TYPE
    SYNTAX      TmnxVRtrIDOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessActivePortalRouter indicates the router of
         the active portal.

         This value is only applicable when tmnxWppPGSessStatus is
         'authenticating' or 'loggingOut'."
    ::= { tmnxWppPGSessEntry 13 }

tmnxWppPGSessActivePortalName    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessActivePortalName indicates the portal name
         of the active portal.

         This value is only applicable when tmnxWppPGSessStatus is
         'authenticating' or 'loggingOut'."
    ::= { tmnxWppPGSessEntry 14 }

tmnxWppPGSessClientAddrType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessClientAddrType specifies the address type of
         tmnxWppPGSessClientAddr."
    ::= { tmnxWppPGSessEntry 15 }

tmnxWppPGSessClientAddr          OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppPGSessClientAddr specifies the source address the
         client used to contact the WPP portal."
    ::= { tmnxWppPGSessEntry 16 }

tmnxWppSysObjs                   OBJECT IDENTIFIER ::= { tmnxWppObjs 99 }

tmnxWppSysName                   OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxWppSysName specifies the system name to be used in
         WPP messages."
    DEFVAL      { "" }
    ::= { tmnxWppSysObjs 1 }

tmnxWppTableLastCh               OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppTableLastCh indicates the value of
         sysUpTime at the time of the last modification of an entry in the
         tmnxWppTable."
    ::= { tmnxWppObjs 100 }

tmnxWppPortalTableLastCh         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppPortalTableLastCh indicates the value
         of sysUpTime at the time of the last modification of an entry in the
         tmnxWppPortalTable."
    ::= { tmnxWppObjs 101 }

tmnxWppIfTableLastCh             OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxWppIfTableLastCh indicates the value of
         sysUpTime at the time of the last modification of an entry in the
         tmnxWppIfTable."
    ::= { tmnxWppObjs 102 }

tmnxWppNotificationObjs          OBJECT IDENTIFIER ::= { tmnxWpp 2 }

tmnxWppNotifyDescription         OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object tmnxWppNotifyDescription is a printable character string."
    ::= { tmnxWppNotificationObjs 1 }

tmnxWppConformance               OBJECT IDENTIFIER ::= { tmnxSRConfs 80 }

tmnxWppCompliances               OBJECT IDENTIFIER ::= { tmnxWppConformance 1 }

tmnxWppCompliance                MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of Web Portal Protocol on
         Nokia 7xxx series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxWppGroup
        }
    ::= { tmnxWppCompliances 1 }

tmnxWppNotifyCompliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for Web Portal Protocol notifications on
         Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxWppNotifyGroup
        }
    ::= { tmnxWppCompliances 2 }

tmnxWppV12v0Compliance           MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of Web Portal Protocol on
         Nokia 7xxx series systems in release 12.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxWppGroup,
            tmnxWppV12v0Group,
            tmnxWppNtfLogoutGroup,
            tmnxWppNotifyGroup
        }
    ::= { tmnxWppCompliances 3 }

tmnxWppV15v0Compliance           MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of Web Portal Protocol on
         Nokia 7xxx series systems in release 15.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxWppGroup,
            tmnxWppV12v0Group,
            tmnxWppV15v0Group,
            tmnxWppNtfLogoutGroup,
            tmnxWppNotifyGroup
        }
    ::= { tmnxWppCompliances 4 }

tmnxWppV20v0Compliance           MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of Web Portal Protocol on
         Nokia 7xxx series systems in release 20.0."
    MODULE
        MANDATORY-GROUPS {
            tmnxWppV20v0Group,
            tmnxWppNotifyV16v0Group
        }
    ::= { tmnxWppCompliances 5 }

tmnxWppGroups                    OBJECT IDENTIFIER ::= { tmnxWppConformance 2 }

tmnxWppGroup                     OBJECT-GROUP
    OBJECTS     {
        tmnxWppRowStatus,
        tmnxWppLastCh,
        tmnxWppAdminState,
        tmnxWppStatsName,
        tmnxWppStatsVal,
        tmnxWppPortalLastCh,
        tmnxWppPortalRowStatus,
        tmnxWppPortalAddrType,
        tmnxWppPortalAddr,
        tmnxWppPortalAdminState,
        tmnxWppPortalStateControlledRtr,
        tmnxWppPortalStateNumInterfaces,
        tmnxWppPortalStatsName,
        tmnxWppPortalStatsVal,
        tmnxWppHostStatus,
        tmnxWppHostSerialNumber,
        tmnxWppHostRequestId,
        tmnxWppHostPortalRemotePort,
        tmnxWppHostPortalLclIpAddrType,
        tmnxWppHostPortalLclIpAddr,
        tmnxWppHostUserName,
        tmnxWppHostService,
        tmnxWppHostMacAddress,
        tmnxWppIfLastCh,
        tmnxWppIfRowStatus,
        tmnxWppIfAdminState,
        tmnxWppIfPortalRouter,
        tmnxWppIfPortalName,
        tmnxWppIfSubProfile,
        tmnxWppIfSLAProfile,
        tmnxWppIfAppProfile,
        tmnxWppIfRestoreDisconnected,
        tmnxWppTableLastCh,
        tmnxWppPortalTableLastCh,
        tmnxWppIfTableLastCh
    }
    STATUS      current
    DESCRIPTION
        "The group of objects for the management of the Web Portal Protocol
         (WPP) on Nokia SROS series systems."
    ::= { tmnxWppGroups 1 }

tmnxWppV12v0Group                OBJECT-GROUP
    OBJECTS     {
        tmnxWppPortalSecret,
        tmnxWppPortalVersion,
        tmnxWppIfUserDb,
        tmnxWppIfLeaseTime,
        tmnxWppIfEnableTriggeredHosts,
        tmnxWppHostIsTriggered,
        tmnxWppPortalStateTriggeredHosts,
        tmnxWppHostTrackSrrpInst,
        tmnxWppHostIsMCBackup
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects for the management of the Web Portal
         Protocol (WPP) on Nokia SROS release 12.0 series systems."
    ::= { tmnxWppGroups 2 }

tmnxWppNtfLogoutGroup            OBJECT-GROUP
    OBJECTS     {
        tmnxWppPortalRetryInterval,
        tmnxWppPortalNtfLogoutRetries,
        tmnxWppPortalAckAuthRetries
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects for the management of the Web Portal
         Protocol (WPP) on Nokia SROS release 12.0 series systems."
    ::= { tmnxWppGroups 3 }

tmnxWppV15v0Group                OBJECT-GROUP
    OBJECTS     {
        tmnxWppPortalGroupLastCh,
        tmnxWppPortalGroupRowStatus,
        tmnxWppPortalGroupDescription,
        tmnxWppPortalGroupAdminState,
        tmnxWppPortalGroupPortalLastCh,
        tmnxWppPortalGroupPortalRowStat,
        tmnxWppIfPortalGroupName,
        tmnxWppPortalGroupStateContrRtr,
        tmnxWppPortalGroupStateNumItfs,
        tmnxWppPortalGroupStateTrigHosts,
        tmnxWppPGHostStatus,
        tmnxWppPGHostSerialNumber,
        tmnxWppPGHostRequestId,
        tmnxWppPGHostPortalRemotePort,
        tmnxWppPGHostPortalLclIpAddrType,
        tmnxWppPGHostPortalLclIpAddr,
        tmnxWppPGHostUserName,
        tmnxWppPGHostService,
        tmnxWppPGHostMacAddress,
        tmnxWppPGHostIsTriggered,
        tmnxWppPGHostTrackSrrpInst,
        tmnxWppPGHostIsMCBackup,
        tmnxWppPGHostActivePortalRouter,
        tmnxWppPGHostActivePortalName,
        tmnxWppPortalAckInfoPortFormat,
        tmnxWppSysName
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects for the management of the Web Portal
         Protocol (WPP) on Nokia SROS release 15.0 series systems."
    ::= { tmnxWppGroups 4 }

tmnxWppV20v0Group                OBJECT-GROUP
    OBJECTS     {
        tmnxWppSessStatus,
        tmnxWppSessSerialNumber,
        tmnxWppSessRequestId,
        tmnxWppSessPortalRemotePort,
        tmnxWppSessPortalLclIpAddrType,
        tmnxWppSessPortalLclIpAddr,
        tmnxWppSessUserName,
        tmnxWppSessService,
        tmnxWppSessMacAddress,
        tmnxWppSessIsTriggered,
        tmnxWppSessTrackSrrpInst,
        tmnxWppSessIsMCBackup,
        tmnxWppSessClientAddrType,
        tmnxWppSessClientAddr,
        tmnxWppPGSessStatus,
        tmnxWppPGSessSerialNumber,
        tmnxWppPGSessRequestId,
        tmnxWppPGSessPortalRemotePort,
        tmnxWppPGSessPortalLclIpAddrType,
        tmnxWppPGSessPortalLclIpAddr,
        tmnxWppPGSessUserName,
        tmnxWppPGSessService,
        tmnxWppPGSessMacAddress,
        tmnxWppPGSessIsTriggered,
        tmnxWppPGSessTrackSrrpInst,
        tmnxWppPGSessIsMCBackup,
        tmnxWppPGSessActivePortalRouter,
        tmnxWppPGSessActivePortalName,
        tmnxWppPGSessClientAddrType,
        tmnxWppPGSessClientAddr
    }
    STATUS      current
    DESCRIPTION
        "The group of additional objects for the management of the Web Portal
         Protocol (WPP) on Nokia SROS release 20.0 series systems."
    ::= { tmnxWppGroups 5 }

tmnxWppNotifyObjsGroup           OBJECT-GROUP
    OBJECTS     {
        tmnxWppNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "The group of notification objects supporting NAT notifications on
         Nokia SROS series systems."
    ::= { tmnxWppGroups 99 }

tmnxWppNotifyGroup               NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxWppPortalStatChanged,
        tmnxWppHostAuthenticationFailed,
        tmnxWppPortalUnreachable,
        tmnxWppPortalGroupStatChanged
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting WPP on Nokia SROS series
         systems."
    ::= { tmnxWppGroups 100 }

tmnxWppNotifyV16v0Group          NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxWppPGHostAuthFailed
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting WPP on Nokia SROS series systems
         added in release 16.0."
    ::= { tmnxWppGroups 101 }

tmnxWppNotifyPrefix              OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 80 }

tmnxWppNotifications             OBJECT IDENTIFIER ::= { tmnxWppNotifyPrefix 0 }

tmnxWppPortalStatChanged         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxWppPortalStateControlledRtr,
        tmnxWppPortalStateNumInterfaces
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxWppPortalStatChanged notification is sent when the
         value of one of the objects in the tmnxWppPortalStatTable changes.
         [EFFECT] No effect on the service. [RECOVERY] No recovery required."
    ::= { tmnxWppNotifications 1 }

tmnxWppHostAuthenticationFailed  NOTIFICATION-TYPE
    OBJECTS     {
        tmnxWppHostStatus,
        tmnxWppNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxWppHostAuthenticationFailed notification is sent when
         a WPP host could not be authenticated.

         More detailed information is supplied in the object
         tmnxWppNotifyDescription.

         [EFFECT] The corresponding row in the tmnxWppHostTable disappears if
         the value of the object tmnxWppIfRestoreDisconnected is equal to
         'false'; otherwise, the value of the object tmnxWppHostStatus is set
         to 'idle'.

         [RECOVERY] The recovery action will depend on the exact failure cause,
         as given by the value of tmnxWppNotifyDescription."
    ::= { tmnxWppNotifications 2 }

tmnxWppPortalUnreachable         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxWppPortalLastCh,
        tmnxWppNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxWppPortalUnreachable notification is generated when
         WPP protocol messages must be sent out after a node is restarted, but
         when no route is available yet towards it. This notification is sent
         every minute as long as the portal is not reachable yet.

         [EFFECT] The WPP portal is unreachable and finally the messages will
         be dropped.

         [RECOVERY] Initially no recovery is required as it is expected that
         the WPP portal can be unreachable for some time after a node restart.
         When however the problem remains the operator should check the routing
         table."
    ::= { tmnxWppNotifications 3 }

tmnxWppPortalGroupStatChanged    NOTIFICATION-TYPE
    OBJECTS     {
        tmnxWppPortalGroupStateContrRtr,
        tmnxWppPortalGroupStateNumItfs
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxWppPortalGroupStatChanged notification is sent when
         the value of one of the objects in the tmnxWppPortalGroupStatTable
         changes. [EFFECT] No effect on the service. [RECOVERY] No recovery
         required."
    ::= { tmnxWppNotifications 4 }

tmnxWppPGHostAuthFailed          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxWppPGHostStatus,
        tmnxWppNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxWppPGHostAuthFailed notification is sent when a WPP
         host could not be authenticated.

         More detailed information is supplied in the object
         tmnxWppNotifyDescription.

         [EFFECT] The corresponding row in the tmnxWppPGHostTable disappears if
         the value of the object tmnxWppIfRestoreDisconnected is equal to
         'false'; otherwise, the value of the object tmnxWppPGHostStatus is set
         to 'idle'.

         [RECOVERY] The recovery action will depend on the exact failure cause,
         as given by the value of tmnxWppNotifyDescription."
    ::= { tmnxWppNotifications 5 }

END