TIMETRA-SAS-QOS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, IpAddress, Integer32, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, MacAddress, TruthValue, StorageType, TimeStamp FROM SNMPv2-TC timetraSASObjs, timetraSASNotifyPrefix, timetraSASConfs, timetraSASModules FROM TIMETRA-SAS-GLOBAL-MIB Dot1PPriority, IpAddressPrefixLength, ServiceAccessPoint,TItemDescription, TNamedItem, TNamedItemOrEmpty, TDSCPValue, TDSCPName, TDSCPNameOrEmpty, TIpProtocol, TTcpUdpPort, TDSCPValueOrNone, TTcpUdpPortOperator, TFrameType, TFCName, TLspExpValue, TQueueId, TIngressQueueId, TEgressQueueId, TPortSchedulerPIR, TPortSchedulerCIR, TIngressMeterId, TFCType, TSapIngressMeterId, TNetworkIngressMeterId, TMplsLspExpProfMapID, TDEValue FROM TN-TC-MIB AtmServiceCategory, AtmTrafficDescrParamIndex FROM ATM-TC-MIB InetAddressIPv6, InetAddressPrefixLength FROM INET-ADDRESS-MIB svcId FROM TIMETRA-SERV-MIB sapPortId, sapEncapValue FROM TIMETRA-SAP-MIB tSapIngressIndex, tNetworkPolicyIndex, tSlopePolicyEntry, tPortSchedulerPlcyEntry, tSapIngressFCEntry, tSlopePolicy, tNetworkQueuePolicyEntry, tSapIngressEntry, tNetworkPolicyEntry, tSapEgressEntry, tNetworkQueueEntry, tSapEgressQueueEntry, tSapIngressQueueEntry, tSapIngressMacCriteriaEntry, tSapIngressIPCriteriaEntry,tSapIngressIPv6CriteriaEntry, tNetworkEgressFCEntry FROM TIMETRA-QOS-MIB ; timetraSASQosMIBModule MODULE-IDENTITY LAST-UPDATED "0701010000Z" ORGANIZATION "Alcatel" CONTACT-INFO "Alcatel 7x50 Support Web: http://www.alcatel.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel 7x50 systems. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "0801090000Z" DESCRIPTION "Rev 1.0 09 Jan 2008 00:00 This is the 1.0 release of the TIMETRA-SAS-GLOBAL-MIB." ::= { timetraSASModules 5 } tSASQosObjects OBJECT IDENTIFIER ::= { timetraSASObjs 1 } tmnxSASQosConformance OBJECT IDENTIFIER ::= { timetraSASConfs 1 } tAccessEgressObjects OBJECT IDENTIFIER ::= { tSASQosObjects 1 } tSASSapIngressObjects OBJECT IDENTIFIER ::= { tSASQosObjects 2 } tSASNetworkIngressObjects OBJECT IDENTIFIER ::= { tSASQosObjects 3 } tSASSlopeObjects OBJECT IDENTIFIER ::= { tSASQosObjects 4 } tSasSchedulerObjects OBJECT IDENTIFIER ::= { tSASQosObjects 5 } tQosFrameBasedAccntObjects OBJECT IDENTIFIER ::= { tSASQosObjects 6 } tSASNetworkObjects OBJECT IDENTIFIER ::= { tSASQosObjects 7 } tSASQueueMgmtObjects OBJECT IDENTIFIER ::= { tSASQosObjects 8 } tSASSapEgressObjects OBJECT IDENTIFIER ::= { tSASQosObjects 9 } tMplsQosObjects OBJECT IDENTIFIER ::= { tSASQosObjects 10 } tSASGeneralQosObjects OBJECT IDENTIFIER ::= { tSASQosObjects 21 } -- -- TEXTUAL-CONVENTIONs for Alcatel 7x50 SR series QoS Elements -- TPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a policy." SYNTAX Unsigned32 (0..65535) TSapIngressPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a SAP ingress policy." SYNTAX TPolicyID TSapEgressPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a SAP egress policy." SYNTAX TPolicyID (1..65535) TAccessEgressPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a Access egress policy." SYNTAX TPolicyID (1..65535) TNetworkPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a network policy." SYNTAX TPolicyID (1..65535) TRemarkPolicyID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the identification number of a Remark policy." SYNTAX TPolicyID (1..65535) TItemScope ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service domain. TItemScope applies to SAP-ingress, SAP-egress, and Network policies, and to IP filters and MAC filters. exclusive: When the scope of an item is defined as exclusive, the item can only be applied once, for example to a single SAP. Attempting to assign the policy to a second SAP is not allowed and will result in an error. If the item is removed from the exclusive SAP, it will become available for assignment to another exclusive SAP. A non-applied exclusive scope policy is a candidate to be removed from the system by a TBD garbage collection command. The system default policies cannot be put into the exclusive scope. An error will be generated if scope exclusive is executed in any policies with a policy-id equal to 1. template: When the scope of an item is defined as template, the item can be applied any number of times. Policies with template scope will not be considered for deletion by a TBD garbage collection command; all items of scope 'template' must be deleted explicitly. The system default policies will always be scope template. An error will occur if a policy-id 1 is attempted to be set to scope exclusive." SYNTAX INTEGER { exclusive(1), template(2) } TItemMatch ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter." SYNTAX INTEGER { off(1), false(2), true(3) } TPriority ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the priority to apply to a packet" SYNTAX INTEGER { low(1), high(2) } TPriorityOrDefault ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the priority to apply to a packet. when set to default(3), the priority from the default-action is used." SYNTAX INTEGER { low(1), high(2), default(3) } TProfile ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the profile marking of a packet at the ingress." SYNTAX INTEGER { in(1), out(2) } TProfileOrDei ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "the profile marking of a packet at the ingress." SYNTAX INTEGER { in(1), out(2), use-dei(13) } TProfileOrNone ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Profile marking of a packet." SYNTAX INTEGER { none (0), in(1), out(2) } TAdaptationRule ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The adaptation rule to be applied to calcluate the operational values for the specified entity." SYNTAX INTEGER { max (1), min (2), closest(3) } TRemarkType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The remarking to be used." SYNTAX INTEGER { none (1), dscp (2), precedence (3) } TPrecValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7." SYNTAX INTEGER (0..7) TPrecValueOrNone ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused." SYNTAX INTEGER (-1 | 0..7) TIngressCIRRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate." SYNTAX INTEGER (-1 | 0..20000000) TIngressPIRRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate." SYNTAX INTEGER (-1 | 0..20000000) TCIRRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate." SYNTAX INTEGER (-1 | 0..100000000) TPIRRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate." SYNTAX INTEGER (-1 | 1..100000000) TPIRRateOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The rate to be used in kbps. The value -1 means maximum rate. The value 0 means undefined rate." SYNTAX INTEGER (-1 | 0..100000000) TIngressBurstSize ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The amount of buffer space (in Kbits) assigned to a meter. The value -1 means default value" SYNTAX INTEGER (-1 | 4..2146959) TBurstSize ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value." SYNTAX INTEGER (-1 | 0..131072) TBurstPercent ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The percentage of buffer space assigned to a queue that is reserved for some purpose." SYNTAX INTEGER (0..100) TBurstHundredthsOfPercent ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The percentage of buffer space assigned to a queue that is reserved for some purpose, defined to two decimal places." SYNTAX Integer32 (0..10000) TBurstPercentOrDefault ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value." SYNTAX INTEGER (-1 | 0..100) TRatePercent ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The percentage of maximum rate allowed." SYNTAX INTEGER (0..100) TLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The level of the specified entity while feeding into the parent." SYNTAX INTEGER (1..8) TLevelOrDefault ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value." SYNTAX INTEGER (0|1..8) TWeight ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The weight of the specified entity while feeding into the parent." SYNTAX INTEGER (0..100) TQWeight ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Queue weight of the specified entity." SYNTAX INTEGER (0 |1..100) TMeterMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Meter mode" SYNTAX INTEGER { priority(1), profile (2) } TPlcyMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Policy mode " SYNTAX INTEGER { strict (0), roundRobin (1), weightedRoundRobin (2), weightedDeficitRoundRobin (3) } TMeterRateMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime." SYNTAX INTEGER { trtcm (1), srtcm (2), trtcm1 (3), trtcm2 (4) } TPlcyQuanta ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Policy Quata" SYNTAX INTEGER TQueueMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The mode in which the queue is operating. If the queue is operating in the 'priority' mode, it is capable of handling traffic differently with two distinct priorities. These priorities are assigned by the stages preceding the queueing framework in the system. When the queue is operating in the 'profile' mode, in other words the color aware mode, the queue tries to provide the appropriate bandwidth to the packets with different profiles. The profiles are assigned according to the configuration of the forwarding class or the sub-forwarding class. In 'priority' mode, the queue does not have the functionality to support the profiled traffic and in such cases the queue will have a degraded performance. However, the converse is not valid and a queue in 'profile' mode should be capable of supporting the different priorities of traffic." SYNTAX INTEGER { priority(1), profile (2) } TEntryIndicator ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Uniquely identifies an entry in a policy or filter table. The value 0 is not a valid entry-id. When used as insertion point the value 0 indicates that entries must be inserted at the very beginning, i.e.before the first entry defined." SYNTAX Unsigned32 (0..65535) TEntryId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. " SYNTAX TEntryIndicator (1..65535) TMatchCriteria ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "determines whether the entry matches traffic using IP match entries or MAC match entries." SYNTAX INTEGER { ip(1), mac(2), none(3), dscp(4), dot1p(5), prec(6) } TAtmTdpDescrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TAtmTdpDescrType is an enumerated integer whose value indicates the types of cell loss priority to be used in conjunction with traffic parameters. The following values are outlined: Integer Value Interpretation ------------- ------------------------ clp0And1pcr PCR applies to CLP 0 and CLP 1 cell flows clp0And1pcrPlusClp0And1scr PCR applies to CLP 0 and CLP 1 cell flows. SCR applies to CLP 0 and CLP 1 cell flows. clp0And1pcrPlusClp0scr PCR applies to CLP 0 and CLP 1 cell flows. SCR applies to CLP 0 cell flows. clp0And1pcrPlusClp0scrTag PCR applies to CLP 0 and CLP 1 cell flows. SCR applies to CLP 0 cell flows. " SYNTAX INTEGER { clp0And1pcr(0), clp0And1pcrPlusClp0And1scr(1), clp0And1pcrPlusClp0scr(2), clp0And1pcrPlusClp0scrTag(3) } TSlopeDropRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The slope drop rate. Mapping of drop-rate values in percentage: 0 - 100% cliff drop 1 - 6.25% 2 - 3.125% 3 - 1.5625% 4 - 0.78125% 5 - 0.390625% 6 - 0.1953125% 7 - 0.09765625% " SYNTAX INTEGER (0..7) TSlopeThreshold ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The percentage of the shared buffer" SYNTAX INTEGER (0..100) TMaxProbability ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The slope between the Start Average and Max Average" SYNTAX Unsigned32 (0..10|25|50|75|100) TNetworkPolicyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Network policy type" SYNTAX INTEGER { ipInterface(1), port(2) } TDot1PLspExpValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "MPLS Experimental bits or 802.1p priority. This type is used when these are shared. -1 means not set." REFERENCE "" SYNTAX INTEGER (-1 | 0..7) TMplsLspExpProfileValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "MPLS Experimental bits. -1 means not set." REFERENCE "" SYNTAX INTEGER (-1 | 0..7) -- -- mib objects -- tMplsLspExpProfMapTable OBJECT-TYPE SYNTAX SEQUENCE OF TMplsLspExpProfMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all MPLS LSP EXP Profiles." ::= { tMplsQosObjects 1 } tMplsLspExpProfMapEntry OBJECT-TYPE SYNTAX TMplsLspExpProfMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about one MPLS LSP EXP Profile" INDEX { tMplsLspExpProfMapIndex } ::= { tMplsLspExpProfMapTable 1 } TMplsLspExpProfMapEntry ::= SEQUENCE { tMplsLspExpProfMapIndex TMplsLspExpProfMapID, tMplsLspExpProfMapRowStatus RowStatus, tMplsLspExpProfMapDescription TItemDescription, tMplsLspExpProfMapLastChanged TimeStamp } tMplsLspExpProfMapIndex OBJECT-TYPE SYNTAX TMplsLspExpProfMapID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tMplsLspExpProfMapIndex is used as index for the table." ::= { tMplsLspExpProfMapEntry 1 } tMplsLspExpProfMapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this profile entry." ::= { tMplsLspExpProfMapEntry 2 } tMplsLspExpProfMapDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "User-provided description of the policy." DEFVAL { ''H } ::= { tMplsLspExpProfMapEntry 3 } tMplsLspExpProfMapLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tMplsLspExpProfMapTable." ::= { tMplsLspExpProfMapEntry 4 } -- tMplsLspExpProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TMplsLspExpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tMplsQosObjects 4 } tMplsLspExpProfileEntry OBJECT-TYPE SYNTAX TMplsLspExpProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about MPLS LSP EXP mapping." INDEX { tMplsLspExpProfMapIndex, tMplsLspExpProfileBits } ::= { tMplsLspExpProfileTable 1 } TMplsLspExpProfileEntry ::= SEQUENCE { tMplsLspExpProfileBits TMplsLspExpProfileValue, tMplsLspExpProfileRowStatus RowStatus, tMplsLspExpProfile TProfile, tMplsLspExpProfileLastChanged TimeStamp } tMplsLspExpProfileBits OBJECT-TYPE SYNTAX TMplsLspExpProfileValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MPLS Exp value to use for MPLS traffic." DEFVAL { -1 } ::= { tMplsLspExpProfileEntry 1 } tMplsLspExpProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this profile entry." ::= { tMplsLspExpProfileEntry 2 } tMplsLspExpProfile OBJECT-TYPE SYNTAX TProfile MAX-ACCESS read-create STATUS current DESCRIPTION "tMplsLspExpProfile specifies the profile to be used for this EXP value as indicated by tMplsLspExpProfileBits." DEFVAL { out } ::= { tMplsLspExpProfileEntry 3 } tMplsLspExpProfileLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tMplsLspExpProfileTable." ::= { tMplsLspExpProfileEntry 4 } -- tGlobalMplsLspExpProfile OBJECT-TYPE SYNTAX TMplsLspExpProfMapID MAX-ACCESS read-create STATUS current DESCRIPTION "tGlobalMplsLspExpProfile is used by the LDP packets when the ip interface is configured in color aware mode. When the ip interface is configured in color blind mode, tGlobalMplsLspExpProfile is not applied to LDP packets received on that ip interface" DEFVAL { 1 } ::= { tMplsQosObjects 3 } tLdpLocalFcEnableAdminStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When tLdpLocalFcEnableAdminStatus is not set, the behavior is like SAS release 3.0 here the profile policy will be attached to one qos policy. tLdpLocalFcEnableAdminStatus when set to true the system opertation status .'tLdpLocalFcEnableOperStatus' will also become 'true', When tLdpLocalFcEnableAdminStatus is set then more than one profile policy can be attached to network policy When tLdpLocalFcEnableAdminStatus is reset to 'false', the system oper 'tLdpLocalFcEnableOperStatus' status would continue to be true until the system is reset.tLdpLocalFcEnableAdminStatus will take effect when the system is reset, " DEFVAL { false } ::= { tMplsQosObjects 5 } tLdpLocalFcEnableOperStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of how ldp local fc is configured. After the system init, reseting tLdpLocalFcEnableAdminStatus to false from 'true' take effect when the system is reset" ::= { tMplsQosObjects 6 } -- -- access-egress policy table -- tAccessEgressTable OBJECT-TYPE SYNTAX SEQUENCE OF TAccessEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all Access-egress policies." ::= { tAccessEgressObjects 1 } tAccessEgressEntry OBJECT-TYPE SYNTAX TAccessEgressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Access Egress QoS information for a particular port" INDEX { tAccessEgressIndex } ::= { tAccessEgressTable 1 } TAccessEgressEntry ::= SEQUENCE { tAccessEgressIndex TAccessEgressPolicyID, tAccessEgressRowStatus RowStatus, tAccessEgressScope TItemScope, tAccessEgressDescription TItemDescription, tAccessEgressLastChanged TimeStamp, tAccessEgressRemark TruthValue, tAccessEgressRemarkPolicyId TRemarkPolicyID, tAccessEgressRemarkType INTEGER } tAccessEgressIndex OBJECT-TYPE SYNTAX TAccessEgressPolicyID MAX-ACCESS not-accessible STATUS current DESCRIPTION "the sap-egress policy ID is used as index for the table." ::= { tAccessEgressEntry 1 } tAccessEgressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of this policy's entry." ::= { tAccessEgressEntry 2 } tAccessEgressScope OBJECT-TYPE SYNTAX TItemScope MAX-ACCESS read-create STATUS current DESCRIPTION "scope of the sap-egress policy." DEFVAL { template } ::= { tAccessEgressEntry 3 } tAccessEgressDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "user-supplied description of this sap-egress policy." DEFVAL { ''H } ::= { tAccessEgressEntry 4 } tAccessEgressLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tAccessEgressTable." ::= { tAccessEgressEntry 5 } tAccessEgressRemark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if the system will remark the egress packets or not. DEf val is TRUE for STU and FALSE for MTU" DEFVAL { false } ::= { tAccessEgressEntry 6 } tAccessEgressRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "Remark Policy Id that be used when remarking is enabled." DEFVAL { 1 } ::= { tAccessEgressEntry 7 } tAccessEgressRemarkType OBJECT-TYPE SYNTAX INTEGER { use-dot1p (1), use-dscp (2), all (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies system remark type, tAccessEgressRemark will be set to true and tAccessEgressRemarkType will specify the remark type." ::= { tAccessEgressEntry 8 } -- -- access-egress policy queue table -- tAccessEgressQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TAccessEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all access-egress policies' queues." ::= { tAccessEgressObjects 2 } tAccessEgressQueueEntry OBJECT-TYPE SYNTAX TAccessEgressQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." INDEX { tAccessEgressIndex, tAccessEgressQueueIndex } ::= { tAccessEgressQueueTable 1 } TAccessEgressQueueEntry ::= SEQUENCE { tAccessEgressQueueIndex TEgressQueueId, tAccessEgressQueueRowStatus RowStatus, tAccessEgressQueueCBS TBurstSize, tAccessEgressQueueMBS TBurstSize, tAccessEgressQueuePIRAdaptation TAdaptationRule, tAccessEgressQueueCIRAdaptation TAdaptationRule, tAccessEgressQueueAdminPIR TPIRRate, tAccessEgressQueueAdminCIR TCIRRate, tAccessEgressQueueOperPIR TPIRRate, tAccessEgressQueueOperCIR TCIRRate, tAccessEgressQueueLastChanged TimeStamp, tAccessEgressQueuePolicyName TNamedItem, tAccessEgressQueuePolicyQueueMode INTEGER, tAccessEgressQueuePolicyWeight INTEGER } tAccessEgressQueueIndex OBJECT-TYPE SYNTAX TEgressQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted." ::= { tAccessEgressQueueEntry 1 } tAccessEgressQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry." ::= { tAccessEgressQueueEntry 2 } tAccessEgressQueueCBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of reserved buffer space (in kilo bytes) for the queue." DEFVAL { -1 } ::= { tAccessEgressQueueEntry 3 } tAccessEgressQueueMBS OBJECT-TYPE SYNTAX TBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum amount of buffer space (in kilo bytes) allowed for the queue." DEFVAL { -1 } ::= { tAccessEgressQueueEntry 4 } tAccessEgressQueuePIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tAccessEgressQueueEntry 5 } tAccessEgressQueueCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tAccessEgressQueueEntry 6 } tAccessEgressQueueAdminPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tAccessEgressQueueEntry 7 } tAccessEgressQueueAdminCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tAccessEgressQueueEntry 8 } tAccessEgressQueueOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The administrative PIR specified by the user." ::= { tAccessEgressQueueEntry 9 } tAccessEgressQueueOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules." ::= { tAccessEgressQueueEntry 10 } tAccessEgressQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tAccessEgressQueueTable." ::= { tAccessEgressQueueEntry 11 } tAccessEgressQueuePolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "SapEgressQueuePolicyName determines the queue management policy attached to this SAP Egress queue." DEFVAL { "default" } ::= { tAccessEgressQueueEntry 12 } tAccessEgressQueuePolicyQueueMode OBJECT-TYPE SYNTAX INTEGER { strict-ef (1), strict (2), weighted (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tAccessEgressQueuePolicyQueueMode specifies this policies mode. It has to be set when the policy is created." DEFVAL { weighted } ::= { tAccessEgressQueueEntry 13 } tAccessEgressQueuePolicyWeight OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "tAccessEgressQueuePolicyWeight specifies this policies weight. It is applicable only if queue mode is weighted." DEFVAL { 1 } ::= { tAccessEgressQueueEntry 14 } -- -- access-egress policy fc table -- tAccessEgressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TAccessEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tAccessEgressObjects 3 } tAccessEgressFCEntry OBJECT-TYPE SYNTAX TAccessEgressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular access-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. " INDEX { tAccessEgressIndex, tAccessEgressFCName } ::= { tAccessEgressFCTable 1 } TAccessEgressFCEntry ::= SEQUENCE { tAccessEgressFCName TFCName, tAccessEgressFCRowStatus RowStatus, tAccessEgressFCQueue TEgressQueueId, tAccessEgressFCDot1PInProfile Dot1PPriority, tAccessEgressFCDot1POutProfile Dot1PPriority, tAccessEgressFCLastChanged TimeStamp, tAccessEgressFCDscpInProfile TDSCPNameOrEmpty, tAccessEgressFCDscpOutProfile TDSCPNameOrEmpty, tAccessEgressFCDot1PProfile Dot1PPriority, tAccessEgressFCForceDEValue TDEValue, tAccessEgressFCDEMark TruthValue } tAccessEgressFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "forwarding class name." ::= { tAccessEgressFCEntry 1 } tAccessEgressFCRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status." ::= { tAccessEgressFCEntry 2 } tAccessEgressFCQueue OBJECT-TYPE SYNTAX TEgressQueueId MAX-ACCESS read-create STATUS current DESCRIPTION "The queue to use for packets in this forwarding class. No FC can map to the same queue being used by 'premium' class. You must specify a valid queue-id before setting the row status to active." ::= { tAccessEgressFCEntry 3 } tAccessEgressFCDot1PInProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "the Dot1p to use for in-profile traffic." DEFVAL { -1 } ::= { tAccessEgressFCEntry 4 } tAccessEgressFCDot1POutProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "the Dot1p to use for in-profile traffic." DEFVAL { -1 } ::= { tAccessEgressFCEntry 5 } tAccessEgressFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "timestamp of last change to this row in tAccessEgressFCTable." ::= { tAccessEgressFCEntry 6 } tAccessEgressFCDscpInProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for in-profile traffic." DEFVAL { ''H } ::= { tAccessEgressFCEntry 7 } tAccessEgressFCDscpOutProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for out-profile traffic." DEFVAL { ''H } ::= { tAccessEgressFCEntry 8 } tAccessEgressFCDot1PProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-create STATUS current DESCRIPTION "the Dot1p to use for profile traffic." DEFVAL { -1 } ::= { tAccessEgressFCEntry 9 } tAccessEgressFCForceDEValue OBJECT-TYPE SYNTAX TDEValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tAccessEgressFCForceDEValue specifies the DE value to set for Access egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tAccessEgressFCDEMark object is set to 'false'." DEFVAL { -1 } ::= { tAccessEgressFCEntry 10 } tAccessEgressFCDEMark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tAccessEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tAccessEgressFCForceDEValue object is not set to '-1'." DEFVAL { false } ::= { tAccessEgressFCEntry 11 } -- -- sap-ingress meter table -- tSapIngressMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all sap-ingress policies' Meters." ::= { tSASSapIngressObjects 1 } tSapIngressMeterEntry OBJECT-TYPE SYNTAX TSapIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular meter for a sap-ingress policy. Meter (1) is the used as a default for unicast and meter (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user." INDEX { tSapIngressIndex, tSapIngressMeter } ::= { tSapIngressMeterTable 1 } TSapIngressMeterEntry ::= SEQUENCE { tSapIngressMeter TSapIngressMeterId, tSapIngressMeterRowStatus RowStatus, tSapIngressMeterMCast TruthValue, tSapIngressMeterCBS TIngressBurstSize, tSapIngressMeterMBS TIngressBurstSize, tSapIngressMeterPIRAdaptation TAdaptationRule, tSapIngressMeterCIRAdaptation TAdaptationRule, tSapIngressMeterAdminPIR TIngressPIRRate, tSapIngressMeterAdminCIR TIngressCIRRate, tSapIngressMeterOperPIR TPIRRate, tSapIngressMeterOperCIR TCIRRate, tSapIngressMeterLastChanged TimeStamp, tSapIngressMeterMode TMeterMode, tSapIngressMeterRateMode TMeterRateMode, tSapIngressMeterAdminCBS TIngressBurstSize, tSapIngressMeterAdminMBS TIngressBurstSize, tSapIngressMeterOperCBS TIngressBurstSize, tSapIngressMeterOperMBS TIngressBurstSize, tSapIngressMeterProfileMode TruthValue, tSapIngressMeterColorMode INTEGER } tSapIngressMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Meter ID is used as the secondary index to the table entry." ::= { tSapIngressMeterEntry 1 } tSapIngressMeterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tSapIngressMeterEntry 2 } tSapIngressMeterMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this is a multicast meter or not." DEFVAL { false } ::= { tSapIngressMeterEntry 8 } tSapIngressMeterCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The amount of committed burst size (in kilo bits) for the meter." DEFVAL { -1 } ::= { tSapIngressMeterEntry 10 } tSapIngressMeterMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The maximum amount of burst size (in kilo bits) allowed for the meter." DEFVAL { -1 } ::= { tSapIngressMeterEntry 11 } tSapIngressMeterCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngressMeterEntry 14 } tSapIngressMeterPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tSapIngressMeterEntry 13 } tSapIngressMeterAdminPIR OBJECT-TYPE SYNTAX TIngressPIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tSapIngressMeterEntry 15 } tSapIngressMeterAdminCIR OBJECT-TYPE SYNTAX TIngressCIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tSapIngressMeterEntry 16 } tSapIngressMeterOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules." ::= { tSapIngressMeterEntry 17 } tSapIngressMeterOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules." ::= { tSapIngressMeterEntry 18 } tSapIngressMeterLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row in tSapIngressMeterTable." ::= { tSapIngressMeterEntry 19 } tSapIngressMeterMode OBJECT-TYPE SYNTAX TMeterMode MAX-ACCESS read-create STATUS current DESCRIPTION "This object is not used on SAS platform currently" DEFVAL { priority } ::= { tSapIngressMeterEntry 21 } tSapIngressMeterRateMode OBJECT-TYPE SYNTAX TMeterRateMode MAX-ACCESS read-create STATUS current DESCRIPTION "Sap Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime." DEFVAL { trtcm1 } ::= { tSapIngressMeterEntry 22 } tSapIngressMeterAdminCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter." DEFVAL { -1 } ::= { tSapIngressMeterEntry 23 } tSapIngressMeterAdminMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter." DEFVAL { -1 } ::= { tSapIngressMeterEntry 24 } tSapIngressMeterOperCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CBS value from the administrative CBS value" ::= { tSapIngressMeterEntry 25 } tSapIngressMeterOperMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the MBS value from the administrative MBS value" ::= { tSapIngressMeterEntry 26 } tSapIngressMeterProfileMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object specifies whether the meter mode is color aware or color blind" DEFVAL { false } ::= { tSapIngressMeterEntry 27 } tSapIngressMeterColorMode OBJECT-TYPE SYNTAX INTEGER { color-aware (1), color-blind (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Set meter color mode" DEFVAL { color-blind } ::= { tSapIngressMeterEntry 28 } --- tNetworkIngressFCExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressFCExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular forwarding class traffic into the specified meter." ::= { tSASNetworkIngressObjects 1 } tNetworkIngressFCExtnEntry OBJECT-TYPE SYNTAX TNetworkIngressFCExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular network-ingress policy's forwarding class mappings to meter. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile." INDEX { tNetworkPolicyIndex, tNetworkIngressFCExtnName } ::= { tNetworkIngressFCExtnTable 1 } TNetworkIngressFCExtnEntry ::= SEQUENCE { tNetworkIngressFCExtnName TNamedItem, tNetworkIngressFCExtnRowStatus RowStatus, tNetworkIngressFCExtnMeter TNetworkIngressMeterId, tNetworkIngressFCExtnMCastMeter TNetworkIngressMeterId, tNetworkIngressFCExtnLastChanged TimeStamp } tNetworkIngressFCExtnName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "tNetworkIngressFCExtnName specifies the forwarding class for which this mapping is defined." ::= { tNetworkIngressFCExtnEntry 1 } tNetworkIngressFCExtnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status for this Entry." ::= { tNetworkIngressFCExtnEntry 2 } tNetworkIngressFCExtnMeter OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meters should be used." ::= { tNetworkIngressFCExtnEntry 3 } tNetworkIngressFCExtnMCastMeter OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tNetworkIngressFCExtnEntry 4 } tNetworkIngressFCExtnLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "tNetworkIngressFCExtnLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified." ::= { tNetworkIngressFCExtnEntry 5 } tNetworkIngressMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about all network policies' meters." ::= { tSASNetworkIngressObjects 2 } tNetworkIngressMeterEntry OBJECT-TYPE SYNTAX TNetworkIngressMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular meter for a network policy. Meter (1) is the used as a default for unicast and meter (9) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user." INDEX { tNetworkPolicyIndex, tNetworkIngressMeterIndex } ::= { tNetworkIngressMeterTable 1 } TNetworkIngressMeterEntry ::= SEQUENCE { tNetworkIngressMeterIndex TNetworkIngressMeterId, tNetworkIngressMeterRowStatus RowStatus, tNetworkIngressMeterCBS TIngressBurstSize, tNetworkIngressMeterMBS TIngressBurstSize, tNetworkIngressMeterCIRAdaptation TAdaptationRule, tNetworkIngressMeterPIRAdaptation TAdaptationRule, tNetworkIngressMeterAdminPIR TIngressPIRRate, tNetworkIngressMeterAdminCIR TIngressCIRRate, tNetworkIngressMeterOperPIR TPIRRate, tNetworkIngressMeterOperCIR TCIRRate, tNetworkIngressMeterLastChanged TimeStamp, tNetworkIngressMeterMode TMeterMode, tNetworkIngressMeterMCast TruthValue, tNetworkIngressMeterRateMode TMeterRateMode, tNetworkIngressMeterAdminCBS TIngressBurstSize, tNetworkIngressMeterAdminMBS TIngressBurstSize, tNetworkIngressMeterOperCBS TIngressBurstSize, tNetworkIngressMeterOperMBS TIngressBurstSize } tNetworkIngressMeterIndex OBJECT-TYPE SYNTAX TNetworkIngressMeterId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Meter ID is used as the secondary index to the table entry." ::= { tNetworkIngressMeterEntry 1 } tNetworkIngressMeterRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tNetworkIngressMeterEntry 2 } tNetworkIngressMeterCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The amount of committed burst size (in kilo bits) for the meter." DEFVAL { -1 } ::= { tNetworkIngressMeterEntry 3 } tNetworkIngressMeterMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The maximum amount of burst size (in kilo bits) allowed for the meter." DEFVAL { -1 } ::= { tNetworkIngressMeterEntry 4 } tNetworkIngressMeterCIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tNetworkIngressMeterEntry 5 } tNetworkIngressMeterPIRAdaptation OBJECT-TYPE SYNTAX TAdaptationRule MAX-ACCESS read-create STATUS current DESCRIPTION "The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset." DEFVAL { closest } ::= { tNetworkIngressMeterEntry 6 } tNetworkIngressMeterAdminPIR OBJECT-TYPE SYNTAX TIngressPIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative PIR specified by the user." DEFVAL { -1 } ::= { tNetworkIngressMeterEntry 7 } tNetworkIngressMeterAdminCIR OBJECT-TYPE SYNTAX TIngressCIRRate MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CIR specified by the user." DEFVAL { 0 } ::= { tNetworkIngressMeterEntry 8 } tNetworkIngressMeterOperPIR OBJECT-TYPE SYNTAX TPIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the PIR value from the administrative PIR value and their corresponding adaptation rules." ::= { tNetworkIngressMeterEntry 9 } tNetworkIngressMeterOperCIR OBJECT-TYPE SYNTAX TCIRRate MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CIR value from the administrative CIR value and their corresponding adaptation rules." ::= { tNetworkIngressMeterEntry 10 } tNetworkIngressMeterLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row." ::= { tNetworkIngressMeterEntry 11 } tNetworkIngressMeterMode OBJECT-TYPE SYNTAX TMeterMode MAX-ACCESS read-create STATUS current DESCRIPTION "Network Ingress Meter Mode" DEFVAL { priority } ::= { tNetworkIngressMeterEntry 12 } tNetworkIngressMeterMCast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if this is a multicast meter or not." DEFVAL { false } ::= { tNetworkIngressMeterEntry 13 } tNetworkIngressMeterRateMode OBJECT-TYPE SYNTAX TMeterRateMode MAX-ACCESS read-create STATUS current DESCRIPTION " Network Ingress Meter Rate mode.The mode can be configured as Two Rate Three Color Marker (trTCM) or Single Rate Three Color Marker (srTCM). The mode command can be executed at anytime." DEFVAL { trtcm1 } ::= { tNetworkIngressMeterEntry 14 } tNetworkIngressMeterAdminCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative CBS specified by the user. The amount of committed burst size (in kilo bits) for the meter." DEFVAL { -1 } ::= { tNetworkIngressMeterEntry 15 } tNetworkIngressMeterAdminMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative MBS specified by the user. The maximum amount of burst size (in kilo bits) allowed for the meter." DEFVAL { -1 } ::= { tNetworkIngressMeterEntry 16 } tNetworkIngressMeterOperCBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the CBS value from the administrative CBS value" ::= { tNetworkIngressMeterEntry 17 } tNetworkIngressMeterOperMBS OBJECT-TYPE SYNTAX TIngressBurstSize MAX-ACCESS read-only STATUS current DESCRIPTION "The operational value derived by computing the MBS value from the administrative MBS value" ::= { tNetworkIngressMeterEntry 26 } tSasSlopePolicyExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSasSlopePolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Table. Additions for sas platform" ::= { tSASSlopeObjects 1 } tSasSlopePolicyExtnEntry OBJECT-TYPE SYNTAX TSasSlopePolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Entry additions for sas platform." AUGMENTS { tSlopePolicyEntry } ::= { tSasSlopePolicyExtnTable 1 } TSasSlopePolicyExtnEntry ::= SEQUENCE { tSlopeHiQueue1DropRate TSlopeDropRate, tSlopeHiQueue2DropRate TSlopeDropRate, tSlopeHiQueue3DropRate TSlopeDropRate, tSlopeHiQueue4DropRate TSlopeDropRate, tSlopeHiQueue5DropRate TSlopeDropRate, tSlopeHiQueue6DropRate TSlopeDropRate, tSlopeHiQueue7DropRate TSlopeDropRate, tSlopeHiQueue8DropRate TSlopeDropRate, tSlopeLoQueue1DropRate TSlopeDropRate, tSlopeLoQueue2DropRate TSlopeDropRate, tSlopeLoQueue3DropRate TSlopeDropRate, tSlopeLoQueue4DropRate TSlopeDropRate, tSlopeLoQueue5DropRate TSlopeDropRate, tSlopeLoQueue6DropRate TSlopeDropRate, tSlopeLoQueue7DropRate TSlopeDropRate, tSlopeLoQueue8DropRate TSlopeDropRate, tSlopeHiStartThreshold TSlopeThreshold, tSlopeLoStartThreshold TSlopeThreshold } tSlopeHiQueue1DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 1 } tSlopeHiQueue2DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 2 } tSlopeHiQueue3DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 3 } tSlopeHiQueue4DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 4 } tSlopeHiQueue5DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 5 } tSlopeHiQueue6DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 6 } tSlopeHiQueue7DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 7 } tSlopeHiQueue8DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "High Queue Drop Rate" DEFVAL { 1 } ::= { tSasSlopePolicyExtnEntry 8 } tSlopeLoQueue1DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 9 } tSlopeLoQueue2DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 10 } tSlopeLoQueue3DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 11 } tSlopeLoQueue4DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 12 } tSlopeLoQueue5DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 13 } tSlopeLoQueue6DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 14 } tSlopeLoQueue7DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 15 } tSlopeLoQueue8DropRate OBJECT-TYPE SYNTAX TSlopeDropRate MAX-ACCESS read-create STATUS current DESCRIPTION "Low Queue Drop Rate" DEFVAL { 0 } ::= { tSasSlopePolicyExtnEntry 16 } tSlopeHiStartThreshold OBJECT-TYPE SYNTAX TSlopeThreshold MAX-ACCESS read-create STATUS current DESCRIPTION "High slope Start Threshold.This object implies that once the shared buffer utilization reaches the start-threshold level then high-priority packets egressing out from a particular queue would be dropped at configured drop rate." DEFVAL { 75 } ::= { tSasSlopePolicyExtnEntry 17 } tSlopeLoStartThreshold OBJECT-TYPE SYNTAX TSlopeThreshold MAX-ACCESS read-create STATUS current DESCRIPTION "Low slope Start Threshold.This implies that once the shared buffer utilization reaches the start-threshold level then low-priority packets egressing out from a particular queue would be dropped at configured drop rate." DEFVAL { 50 } ::= { tSasSlopePolicyExtnEntry 18 } tSlopePolicyQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF TQueueSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slope Policy Per Queue Per Port additions for SAS-M platform. In SAS-M there are three slopes associated with a queue. One slope for Tcp Green packets, one for Tcp Yellow packets and one for Non Tcp Packets(both green and yellow packets). Each slope in turn can have four parameters defining its behavior" ::= { tSASSlopeObjects 2 } tSlopePolicyQueueEntry OBJECT-TYPE SYNTAX TQueueSlopePolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tSlopePolicy, tSlopePolicyQueueId } ::= { tSlopePolicyQueueTable 1 } TQueueSlopePolicyEntry ::= SEQUENCE { tSlopePolicyQueueId TQueueId, tSlopePolicyQueueRowStatus RowStatus, tSlopePolicyQueueLastChanged TimeStamp, tSlopePolicyQueueHiAdminStatus INTEGER, tSlopePolicyQueueHiStartAverage Unsigned32, tSlopePolicyQueueHiMaxAverage Unsigned32, tSlopePolicyQueueHiMaxProbability TMaxProbability, tSlopePolicyQueueLoAdminStatus INTEGER, tSlopePolicyQueueLoStartAverage Unsigned32, tSlopePolicyQueueLoMaxAverage Unsigned32, tSlopePolicyQueueLoMaxProbability TMaxProbability, tSlopePolicyQueueNonTcpAdminStatus INTEGER, tSlopePolicyQueueNonTcpStartAverage Unsigned32, tSlopePolicyQueueNonTcpMaxAverage Unsigned32, tSlopePolicyQueueNonTcpMaxProbability TMaxProbability, tSlopePolicyQueueTimeAvgFactor Unsigned32 } tSlopePolicyQueueId OBJECT-TYPE SYNTAX TQueueId (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue for which slope policy is being defined" ::= { tSlopePolicyQueueEntry 1 } tSlopePolicyQueueRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tSlopePolicyQueueEntry 2 } tSlopePolicyQueueLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row." ::= { tSlopePolicyQueueEntry 3 } tSlopePolicyQueueHiAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSlopePolicyQueueHiAdminStatus specifies the admin state for the queue's high profile (Tcp Green Packets )slope. If the tSlopePolicyQueueHiAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tSlopePolicyQueueEntry 4 } tSlopePolicyQueueHiStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 70 } ::= { tSlopePolicyQueueEntry 5 } tSlopePolicyQueueHiMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 90 } ::= { tSlopePolicyQueueEntry 6 } tSlopePolicyQueueHiMaxProbability OBJECT-TYPE SYNTAX TMaxProbability MAX-ACCESS read-create STATUS current DESCRIPTION "High Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tSlopePolicyQueueEntry 7 } tSlopePolicyQueueLoAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSlopePolicyQueueLoAdminStatus specifies the admin state for the queue's low profile (Tcp Yellow Packets )slope. If the tSlopePolicyQueueLoAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tSlopePolicyQueueEntry 8 } tSlopePolicyQueueLoStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 50 } ::= { tSlopePolicyQueueEntry 9 } tSlopePolicyQueueLoMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 75 } ::= { tSlopePolicyQueueEntry 10 } tSlopePolicyQueueLoMaxProbability OBJECT-TYPE SYNTAX TMaxProbability MAX-ACCESS read-create STATUS current DESCRIPTION "Low Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tSlopePolicyQueueEntry 11 } tSlopePolicyQueueNonTcpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSlopePolicyQueueNonTcpAdminStatus specifies the admin state for the queue's non tcp profile (Non Tcp Packets )slope. If the tSlopePolicyQueueNonTcpAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tSlopePolicyQueueEntry 12 } tSlopePolicyQueueNonTcpStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 50 } ::= { tSlopePolicyQueueEntry 13 } tSlopePolicyQueueNonTcpMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 75 } ::= { tSlopePolicyQueueEntry 14 } tSlopePolicyQueueNonTcpMaxProbability OBJECT-TYPE SYNTAX TMaxProbability MAX-ACCESS read-create STATUS current DESCRIPTION "Non Tcp Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tSlopePolicyQueueEntry 15 } tSlopePolicyQueueTimeAvgFactor OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization." DEFVAL { 7 } ::= { tSlopePolicyQueueEntry 16 } tSasSapIngressFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSasSapIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maintains the mapping of a particular forwarding class traffic into the specified meter." ::= { tSASSapIngressObjects 2 } tSasSapIngressFCEntry OBJECT-TYPE SYNTAX TSasSapIngressFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular sap-ingress policy's forwarding class mappings to meters." AUGMENTS { tSapIngressFCEntry } ::= { tSasSapIngressFCTable 1 } TSasSapIngressFCEntry ::= SEQUENCE { tSapIngressFCMeter TSapIngressMeterId, tSapIngressFCMCastMeter TSapIngressMeterId, tSapIngressFCBCastMeter TSapIngressMeterId, tSapIngressFCUnknownMeter TSapIngressMeterId } tSapIngressFCMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific meter to be used for packets in this forwarding class. A value of zero implies that the default meter should be used." ::= { tSasSapIngressFCEntry 1 } tSapIngressFCMCastMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific multicast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tSasSapIngressFCEntry 2 } tSapIngressFCBCastMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific broadcast meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tSasSapIngressFCEntry 3 } tSapIngressFCUnknownMeter OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-create STATUS current DESCRIPTION "The specific unknown destination meter to be used for packets in this forwarding class. The meter is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default meters should be used." ::= { tSasSapIngressFCEntry 4 } tSasPortSchedulerPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSasPortSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tSasPortSchedulerPlcyTable has an entry for each port scheduler configured on this system." ::= { tSasSchedulerObjects 1 } tSasPortSchedulerPlcyEntry OBJECT-TYPE SYNTAX TSasPortSchedulerPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a particular port scheduler. Entries are created and deleted by the user." AUGMENTS { tPortSchedulerPlcyEntry } ::= { tSasPortSchedulerPlcyTable 1 } TSasPortSchedulerPlcyEntry ::= SEQUENCE { tPortSchedulerPlcyMode TPlcyMode, tPortSchedulerPlcyQuanta TPlcyQuanta, tPortSchedulerPlcyQueue1Weight TQWeight, tPortSchedulerPlcyQueue2Weight TQWeight, tPortSchedulerPlcyQueue3Weight TQWeight, tPortSchedulerPlcyQueue4Weight TQWeight, tPortSchedulerPlcyQueue5Weight TQWeight, tPortSchedulerPlcyQueue6Weight TQWeight, tPortSchedulerPlcyQueue7Weight TQWeight, tPortSchedulerPlcyQueue8Weight TQWeight } tPortSchedulerPlcyMode OBJECT-TYPE SYNTAX TPlcyMode MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Mode" DEFVAL { strict } ::= { tSasPortSchedulerPlcyEntry 1 } tPortSchedulerPlcyQuanta OBJECT-TYPE SYNTAX TPlcyQuanta MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Quanta" DEFVAL { 0 } ::= { tSasPortSchedulerPlcyEntry 2 } tPortSchedulerPlcyQueue1Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 1 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 3 } tPortSchedulerPlcyQueue2Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 2 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 4 } tPortSchedulerPlcyQueue3Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 3 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 5 } tPortSchedulerPlcyQueue4Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 4 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 6 } tPortSchedulerPlcyQueue5Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 5 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 7 } tPortSchedulerPlcyQueue6Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 6 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 8 } tPortSchedulerPlcyQueue7Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 7 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 9 } tPortSchedulerPlcyQueue8Weight OBJECT-TYPE SYNTAX TQWeight MAX-ACCESS read-create STATUS current DESCRIPTION "Port Scheduler Policy Queue 8 Weight" DEFVAL { 1 } ::= { tSasPortSchedulerPlcyEntry 10 } -- ---------------------------------------- -- Ingress QoS Meter SAP Statistics Table -- ---------------------------------------- sapIngQosMeterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SapIngQosMeterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS meter SAP statistics." ::= { tSASSapIngressObjects 3 } sapIngQosMeterStatsEntry OBJECT-TYPE SYNTAX SapIngQosMeterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress statistics about a specific SAP's QoS meter." INDEX { svcId, sapPortId, sapEncapValue, sapIngQosMeterId } ::= { sapIngQosMeterStatsTable 1 } SapIngQosMeterStatsEntry ::= SEQUENCE { sapIngQosMeterId TSapIngressMeterId, sapIngQosMeterStatsForwardedInProfPackets Counter64, sapIngQosMeterStatsForwardedOutProfPackets Counter64, sapIngQosMeterStatsForwardedInProfOctets Counter64, sapIngQosMeterStatsForwardedOutProfOctets Counter64, sapIngQosMeterStatsForwardedPackets Counter64, sapIngQosMeterStatsForwardedOctets Counter64, sapIngQosMeterStatsDroppedPackets Counter64, sapIngQosMeterStatsDroppedOctets Counter64 } sapIngQosMeterId OBJECT-TYPE SYNTAX TSapIngressMeterId MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ingress QoS meter of this SAP." ::= { sapIngQosMeterStatsEntry 1 } sapIngQosMeterStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 10 } sapIngQosMeterStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 11 } sapIngQosMeterStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 12 } sapIngQosMeterStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 13 } sapIngQosMeterStatsForwardedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets forwarded by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 14 } sapIngQosMeterStatsForwardedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets forwarded by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 15 } sapIngQosMeterStatsDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 16 } sapIngQosMeterStatsDroppedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets dropped by the ingress Qchip." ::= { sapIngQosMeterStatsEntry 17 } tQosIngressFrameBasedAccnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable frame based accounting for all the ingress meters in use by the system. When this is enabled the ingress meters account for the IFG (12 bytes) + SFD (8 bytes) overhead associated with Ethernet frame." DEFVAL { false } ::= { tQosFrameBasedAccntObjects 1 } tQosEgressFrameBasedAccnt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to enable frame based accounting for all the egress queue shapers and the port egress rate shaper in use by the system. When this is enabled the shapers account for the IFG (12 bytes) + SFD (8 bytes) overhead associated with Ethernet frame." DEFVAL { false } ::= { tQosFrameBasedAccntObjects 2 } tSapIngressExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { tSASSapIngressObjects 4 } tSapIngressExtnEntry OBJECT-TYPE SYNTAX TSapIngressExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" AUGMENTS { tSapIngressEntry } ::= { tSapIngressExtnTable 1 } TSapIngressExtnEntry ::= SEQUENCE { tSapIngressNumQosClassifiers Unsigned32, tSapIngressQosClassifiersUsed Unsigned32, tSapIngressQosMetersUsed Unsigned32, tSapIngressQosClassifiersRequiredInVpls Unsigned32, tSapIngressQosClassifiersRequiredInEpipe Unsigned32, tSapIngressQosMetersRequiredInVpls Unsigned32, tSapIngressQosMetersRequiredInEpipe Unsigned32, tSapIngressIPCriteriaMatch INTEGER, tSapIngressMacCriteriaMatch INTEGER, tSapIngressDefaultFCProfile TProfileOrDei, tSapIngressIPv6CriteriaEnable TruthValue, tSapIngressIPv6CriteriaMatch INTEGER, tSapIngressIPMacMatch INTEGER, tSapIngressQosClassifiersRequiredInIes Unsigned32, tSapIngressQosMetersRequiredInIes Unsigned32 } tSapIngressNumQosClassifiers OBJECT-TYPE SYNTAX Unsigned32 (2..256) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of ingress QoS classifiers to be allocated to the SAP on which this policy is applied. The number of QoS classifiers required by a SAP ingress QoS policy should be less than or equal to its tSapIngressNumQosClassifiers. The number of Meters required by a SAP ingress QoS policy should be less than or equal to half the number of tSapIngressNumQosClassifiers." DEFVAL { 2 } ::= { tSapIngressExtnEntry 1 } tSapIngressQosClassifiersUsed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a VPLS SAP." ::= { tSapIngressExtnEntry 2 } tSapIngressQosMetersUsed OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a VPLS SAP." ::= { tSapIngressExtnEntry 3 } tSapIngressQosClassifiersRequiredInVpls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a VPLS SAP." ::= { tSapIngressExtnEntry 4 } tSapIngressQosClassifiersRequiredInEpipe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a EPIPE SAP." ::= { tSapIngressExtnEntry 5 } tSapIngressQosMetersRequiredInVpls OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a VPLS SAP." ::= { tSapIngressExtnEntry 6 } tSapIngressQosMetersRequiredInEpipe OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS meters required when this policy is applied on a SAP. This value is calculated based on the number of meters required for a EPIPE SAP." ::= { tSapIngressExtnEntry 7 } tSapIngressIPCriteriaMatch OBJECT-TYPE SYNTAX INTEGER { any (1), dscp-only(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria as 'any' or 'dscp-only' based on ip. The default value is 'dscp-only' " DEFVAL { dscp-only } ::= { tSapIngressExtnEntry 8 } tSapIngressMacCriteriaMatch OBJECT-TYPE SYNTAX INTEGER { any (1), dot1p-only(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria as 'any' or 'dot1p-only' based on Mac Address. The default value is 'any' " DEFVAL { any } ::= { tSapIngressExtnEntry 9 } tSapIngressDefaultFCProfile OBJECT-TYPE SYNTAX TProfileOrDei MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressDefaultFCProfile specifies the profile for the default fc" DEFVAL { out } ::= { tSapIngressExtnEntry 10 } tSapIngressIPv6CriteriaEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressIPv6CriteriaEnable is a boolean flag which allows/disallows configuring match criteria based on ipv6 address" DEFVAL { false } ::= { tSapIngressExtnEntry 11 } tSapIngressIPv6CriteriaMatch OBJECT-TYPE SYNTAX INTEGER { any (1), dscp-only(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria as 'any' or 'dscp-only' based on ipv6. The default value is 'dscp-only' " DEFVAL { dscp-only } ::= { tSapIngressExtnEntry 12 } tSapIngressIPMacMatch OBJECT-TYPE SYNTAX INTEGER { none (0), ip-first (1), mac-first (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the basic match criteria whether to match ip or mac criteria first" DEFVAL { none } ::= { tSapIngressExtnEntry 13 } tSapIngressQosClassifiersRequiredInIes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a IES SAP." ::= { tSapIngressExtnEntry 14 } tSapIngressQosMetersRequiredInIes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates the number of ingress QoS classifiers required when this policy is applied on a SAP. This value is calculated based on the number of classifiers required for a IES SAP." ::= { tSapIngressExtnEntry 15 } tNetworkPolicyExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkPolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tNetworkPolicyTable" ::= { tSASNetworkObjects 1 } tNetworkPolicyExtnEntry OBJECT-TYPE SYNTAX TNetworkPolicyExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" AUGMENTS { tNetworkPolicyEntry } ::= { tNetworkPolicyExtnTable 1 } TNetworkPolicyExtnEntry ::= SEQUENCE { tNetworkPolicyType TNetworkPolicyType, tNetworkPolicyRemarkPolicyId TRemarkPolicyID, tNetworkIngressMeterColorMode INTEGER, tNetworkIngressMplsLspExpProfile TMplsLspExpProfMapID, tNetworkEgressRemarkType INTEGER } tNetworkPolicyType OBJECT-TYPE SYNTAX TNetworkPolicyType MAX-ACCESS read-create STATUS current DESCRIPTION "Network policy Type determines the point of attachment of the network qos policy. Network policy with 'ipInterface' type can be attached to ip interface and 'port' type can be attached to physical port" DEFVAL { ipInterface } ::= { tNetworkPolicyExtnEntry 1 } tNetworkPolicyRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "Remark Policy Id that be used." DEFVAL { 2 } ::= { tNetworkPolicyExtnEntry 2 } tNetworkIngressMeterColorMode OBJECT-TYPE SYNTAX INTEGER { color-aware (1), color-blind (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkIngressMeterColorMode indicates whether the ip interface is color-aware or color-blind. By default every ip interface is color-aware" DEFVAL { color-aware } ::= { tNetworkPolicyExtnEntry 3 } tNetworkIngressMplsLspExpProfile OBJECT-TYPE SYNTAX TMplsLspExpProfMapID MAX-ACCESS read-write STATUS current DESCRIPTION "tNetworkIngressMplsLspExpProfile attaches the MPLS LSP EXP Profile to this network policy." DEFVAL { 1 } ::= { tNetworkPolicyExtnEntry 4 } tNetworkEgressRemarkType OBJECT-TYPE SYNTAX INTEGER { use-dot1p (1), use-dscp (2), all (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies system remark type, tNetworkPolicyEgressRemark will be set to true and tNetworkEgressRemarkType will specify the remark type." ::= { tNetworkPolicyExtnEntry 5 } -- tNetworkQueueExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tNetworkQueueTable" ::= { tSASNetworkObjects 2 } tNetworkQueueExtnEntry OBJECT-TYPE SYNTAX TNetworkQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" AUGMENTS { tNetworkQueueEntry } ::= { tNetworkQueueExtnTable 1 } TNetworkQueueExtnEntry ::= SEQUENCE { tNetworkQueuePolicyName TNamedItem, tNetworkQueuePolicyQueueMode INTEGER, tNetworkQueuePolicyWeight INTEGER } tNetworkQueuePolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "NetworkQueuePolicyName determines the queue management policy attached to this network queue." DEFVAL { "default" } ::= { tNetworkQueueExtnEntry 1 } tNetworkQueuePolicyQueueMode OBJECT-TYPE SYNTAX INTEGER { strict-ef (1), strict (2), weighted (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkQueuePolicyQueueMode specifies this policies mode. It has to be set when the policy is created." DEFVAL { weighted } ::= { tNetworkQueueExtnEntry 2 } tNetworkQueuePolicyWeight OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "tNetworkQueuePolicyWeight specifies this policies weight. It is applicable only if queue mode is weighted." DEFVAL { 1 } ::= { tNetworkQueueExtnEntry 3 } -- tNetworkEgressFCExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TNetworkEgressFCExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about all network policies' egress FC traffic disposition, this table extends the capabilities available in tNetworkEgressFCTable" ::= { tSASNetworkObjects 3 } tNetworkEgressFCExtnEntry OBJECT-TYPE SYNTAX TNetworkEgressFCExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile." AUGMENTS { tNetworkEgressFCEntry } ::= { tNetworkEgressFCExtnTable 1 } TNetworkEgressFCExtnEntry ::= SEQUENCE { tNetworkEgressFCDot1pProfile Dot1PPriority } tNetworkEgressFCDot1pProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "the Dot1p to use for in-profile traffic." ::= { tNetworkEgressFCExtnEntry 1 } -- tQueueMgmtPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TQueueMgmtPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue Management Policy definition for 7210-X platform." ::= { tSASQueueMgmtObjects 1 } tQueueMgmtPolicyEntry OBJECT-TYPE SYNTAX TQueueMgmtPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { tQueueMgmtPolicyName } ::= { tQueueMgmtPolicyTable 1 } TQueueMgmtPolicyEntry ::= SEQUENCE { tQueueMgmtPolicyName TNamedItem, tQueueMgmtPolicyRowStatus RowStatus, tQueueMgmtPolicyLastChanged TimeStamp, tQueueMgmtPolicyDescription TItemDescription, tQueueMgmtPolicyHiAdminStatus INTEGER, tQueueMgmtPolicyHiStartAverage Unsigned32, tQueueMgmtPolicyHiMaxAverage Unsigned32, tQueueMgmtPolicyHiMaxProbability Unsigned32, tQueueMgmtPolicyLoAdminStatus INTEGER, tQueueMgmtPolicyLoStartAverage Unsigned32, tQueueMgmtPolicyLoMaxAverage Unsigned32, tQueueMgmtPolicyLoMaxProbability Unsigned32, tQueueMgmtPolicyCBS INTEGER, tQueueMgmtPolicyMBS INTEGER, tQueueMgmtPolicyTimeAvgFactor Unsigned32, tQueueMgmtPolicyScope TItemScope } tQueueMgmtPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tQueueMgmtPolicyName specifies the name of the Queue Management policy." ::= { tQueueMgmtPolicyEntry 1 } tQueueMgmtPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status of the entry. This allows creation/deletion of rows in this table." ::= { tQueueMgmtPolicyEntry 2 } tQueueMgmtPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row." ::= { tQueueMgmtPolicyEntry 3 } tQueueMgmtPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "User-provided description of the policy." DEFVAL { ''H } ::= { tQueueMgmtPolicyEntry 4 } tQueueMgmtPolicyHiAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tQueueMgmtPolicyHiAdminStatus specifies the admin state for the queue's high profile (Green Packets) slope. If the tQueueMgmtPolicyHiAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tQueueMgmtPolicyEntry 5 } tQueueMgmtPolicyHiStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 70 } ::= { tQueueMgmtPolicyEntry 6 } tQueueMgmtPolicyHiMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 90 } ::= { tQueueMgmtPolicyEntry 7 } tQueueMgmtPolicyHiMaxProbability OBJECT-TYPE SYNTAX Unsigned32 (1..99) MAX-ACCESS read-create STATUS current DESCRIPTION "High Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tQueueMgmtPolicyEntry 8 } tQueueMgmtPolicyLoAdminStatus OBJECT-TYPE SYNTAX INTEGER { up (1), down(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tQueueMgmtPolicyLoAdminStatus specifies the admin state for the queue's low profile (Yellow Packets) slope. If the tQueueMgmtPolicyLoAdminStatus is set to 'down',the slope is inactive." DEFVAL { down } ::= { tQueueMgmtPolicyEntry 9 } tQueueMgmtPolicyLoStartAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability starts to rise above 0." DEFVAL { 50 } ::= { tQueueMgmtPolicyEntry 10 } tQueueMgmtPolicyLoMaxAverage OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped." DEFVAL { 75 } ::= { tQueueMgmtPolicyEntry 11 } tQueueMgmtPolicyLoMaxProbability OBJECT-TYPE SYNTAX Unsigned32 (1..99) MAX-ACCESS read-create STATUS current DESCRIPTION "Low Profile Max Probability.Defines the slope between the Start Average and Max Average" DEFVAL { 75 } ::= { tQueueMgmtPolicyEntry 12 } tQueueMgmtPolicyCBS OBJECT-TYPE SYNTAX INTEGER (-1 | 0..800000) MAX-ACCESS read-create STATUS current DESCRIPTION "The amount of reserved buffer space (in kilo bytes) for the queue." DEFVAL { -1 } ::= { tQueueMgmtPolicyEntry 13 } tQueueMgmtPolicyMBS OBJECT-TYPE SYNTAX INTEGER (-1 | 1..800000) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum amount of buffer space (in kilo bytes) allowed for the queue." DEFVAL { -1 } ::= { tQueueMgmtPolicyEntry 14 } tQueueMgmtPolicyTimeAvgFactor OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization." DEFVAL { 7 } ::= { tQueueMgmtPolicyEntry 15 } tQueueMgmtPolicyScope OBJECT-TYPE SYNTAX TItemScope MAX-ACCESS read-create STATUS current DESCRIPTION "Scope of the queue management policy." DEFVAL { template } ::= { tQueueMgmtPolicyEntry 16 } tSapEgressExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tSapEgressTable" ::= { tSASSapEgressObjects 1 } tSapEgressExtnEntry OBJECT-TYPE SYNTAX TSapEgressExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" AUGMENTS { tSapEgressEntry } ::= { tSapEgressExtnTable 1 } TSapEgressExtnEntry ::= SEQUENCE { tSapEgressRemark TruthValue, tSapEgressRemarkPolicyId TRemarkPolicyID } tSapEgressRemark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies if the system will remark the egress packets on SAP or not." DEFVAL { false } ::= { tSapEgressExtnEntry 1 } tSapEgressRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "Remark Policy Id that be used. The default value is the default dot1p-dscp policy." DEFVAL { 1 } ::= { tSapEgressExtnEntry 2 } tSapEgressQueueExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapEgressQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tSapEgressQueueTable" ::= { tSASSapEgressObjects 2 } tSapEgressQueueExtnEntry OBJECT-TYPE SYNTAX TSapEgressQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" AUGMENTS { tSapEgressQueueEntry } ::= { tSapEgressQueueExtnTable 1 } TSapEgressQueueExtnEntry ::= SEQUENCE { tSapEgressQueuePolicyName TNamedItem, tSapEgressQueuePolicyQueueMode INTEGER, tSapEgressQueuePolicyWeight INTEGER } tSapEgressQueuePolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "SapEgressQueuePolicyName determines the queue management policy attached to this SAP Egress queue." DEFVAL { "default" } ::= { tSapEgressQueueExtnEntry 1 } tSapEgressQueuePolicyQueueMode OBJECT-TYPE SYNTAX INTEGER { strict-ef (1), strict (2), weighted (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgressQueuePolicyQueueMode specifies this policies mode. It has to be set when the policy is created." DEFVAL { weighted } ::= { tSapEgressQueueExtnEntry 2 } tSapEgressQueuePolicyWeight OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "tSapEgressQueuePolicyWeight specifies this policies weight. It is applicable only if queue mode is weighted." DEFVAL { 1 } ::= { tSapEgressQueueExtnEntry 3 } -- -- remark policy table -- tSASRemarkPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TSASRemarkPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tSASGeneralQosObjects 1 } tSASRemarkPolicyEntry OBJECT-TYPE SYNTAX TSASRemarkPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular remarking policy's forwarding class mappings to dot1p / dscp / exp values. Entries are created/deleted by user." INDEX { tSASRemarkPolicyId } ::= { tSASRemarkPolicyTable 1 } TSASRemarkPolicyEntry ::= SEQUENCE { tSASRemarkPolicyId TRemarkPolicyID, tSASRemarkPolicyRowStatus RowStatus, tSASRemarkPolicyDescription TItemDescription, tSASRemarkPolicyType INTEGER, tSASRemarkPolicyLastChanged TimeStamp } tSASRemarkPolicyId OBJECT-TYPE SYNTAX TRemarkPolicyID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The remark policy ID is used as index for the table." ::= { tSASRemarkPolicyEntry 1 } tSASRemarkPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status." ::= { tSASRemarkPolicyEntry 2 } tSASRemarkPolicyDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "User-provided description of the policy." DEFVAL { ''H } ::= { tSASRemarkPolicyEntry 3 } tSASRemarkPolicyType OBJECT-TYPE SYNTAX INTEGER { dot1p (1), dscp (2), lsp-exp (3), dot1p-dscp (4), dot1p-lsp-exp-shared (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The remarking type of this policy. This specifies which of the fields will be remarked." DEFVAL { dot1p-lsp-exp-shared } ::= { tSASRemarkPolicyEntry 4 } tSASRemarkPolicyLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of last change to this row in tSASRemarkPolicyTable." ::= { tSASRemarkPolicyEntry 5 } -- -- remark policy FC table -- tSASRemarkPolicyFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TSASRemarkPolicyFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { tSASGeneralQosObjects 2 } tSASRemarkPolicyFCEntry OBJECT-TYPE SYNTAX TSASRemarkPolicyFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular queue in a remarking policy's forwarding class mappings to dot1p / dscp / exp values. Entries are created/deleted whenever a policy is created/deleted." INDEX { tSASRemarkPolicyId, tSASRemarkPolicyFCName } ::= { tSASRemarkPolicyFCTable 1 } TSASRemarkPolicyFCEntry ::= SEQUENCE { tSASRemarkPolicyFCName TFCName, tSASRemarkPolicyDot1PInProfile Dot1PPriority, tSASRemarkPolicyDot1POutProfile Dot1PPriority, tSASRemarkPolicyDSCPInProfile TDSCPNameOrEmpty, tSASRemarkPolicyDSCPOutProfile TDSCPNameOrEmpty, tSASRemarkPolicyLspExpInProfile TLspExpValue, tSASRemarkPolicyLspExpOutProfile TLspExpValue, tSASRemarkPolicyDot1PLspExpInProfile TDot1PLspExpValue, tSASRemarkPolicyDot1PLspExpOutProfile TDot1PLspExpValue, tSASRemarkPolicyDot1PProfile Dot1PPriority, tSASRemarkPolicyForceDEValue TDEValue, tSASRemarkPolicyFCDEMark TruthValue } tSASRemarkPolicyFCName OBJECT-TYPE SYNTAX TFCName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FC Class Name." ::= { tSASRemarkPolicyFCEntry 1 } tSASRemarkPolicyDot1PInProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p to use for in-profile traffic. This field is valid only for the following remarking types: dot1p dot1p-dscp" DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 2 } tSASRemarkPolicyDot1POutProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p to use for out-of-profile traffic. This field is valid only for the following remarking types: dot1p dot1p-dscp" DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 3 } tSASRemarkPolicyDSCPInProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for in-profile traffic. This field is valid only for remarking type of dscp and dot1p-dscp." DEFVAL { ''H } ::= { tSASRemarkPolicyFCEntry 4 } tSASRemarkPolicyDSCPOutProfile OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "The DSCP to use for out-of-profile traffic. This field is valid only for remarking type of dscp and dot1p-dscp." DEFVAL { ''H } ::= { tSASRemarkPolicyFCEntry 5 } tSASRemarkPolicyLspExpInProfile OBJECT-TYPE SYNTAX TLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The lsp-exp value to use for in-profile traffic. This field is valid only for remarking type of lsp-exp." DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 6 } tSASRemarkPolicyLspExpOutProfile OBJECT-TYPE SYNTAX TLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The lsp-exp value to use for out-of-profile traffic. This field is valid only for remarking type of lsp-exp." DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 7 } tSASRemarkPolicyDot1PLspExpInProfile OBJECT-TYPE SYNTAX TDot1PLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p / MPLS Exp value to use for in-profile traffic. This field is valid only for remarking type of dot1p-lsp-exp-shared." DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 8 } tSASRemarkPolicyDot1PLspExpOutProfile OBJECT-TYPE SYNTAX TDot1PLspExpValue MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p / MPLS Exp value to use for out-profile traffic. This field is valid only for remarking type of dot1p-lsp-exp-shared." DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 9 } tSASRemarkPolicyDot1PProfile OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The Dot1p to use for profile traffic. " DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 10 } tSASRemarkPolicyForceDEValue OBJECT-TYPE SYNTAX TDEValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tSASRemarkPolicyForceDEValue specifies the DE value to set for remark packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSASRemarkFCDEMark object is set to 'false'." DEFVAL { -1 } ::= { tSASRemarkPolicyFCEntry 11 } tSASRemarkPolicyFCDEMark OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tSASRemarkPolicyFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSASRemarkPolicyFCForceDEValue object is not set to '-1'." DEFVAL { false } ::= { tSASRemarkPolicyFCEntry 12 } tSapIngressQueueExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension table to tSapIngressQueueTable" ::= { tSASSapIngressObjects 5 } tSapIngressQueueExtnEntry OBJECT-TYPE SYNTAX TSapIngressQueueExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" AUGMENTS { tSapIngressQueueEntry } ::= { tSapIngressQueueExtnTable 1 } TSapIngressQueueExtnEntry ::= SEQUENCE { tSapIngressQueuePolicyName TNamedItem } tSapIngressQueuePolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "SapIngressQueuePolicyName determines the queue management policy attached to this SAP Ingress queue." DEFVAL { "default" } ::= { tSapIngressQueueExtnEntry 1 } --- tSapIngressIPCriteriaExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressIPCriteriaExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about sap-ingress policies extenstion to tSapIngressIPCriteriaEntry" ::= { tSASSapIngressObjects 6 } tSapIngressIPCriteriaExtnEntry OBJECT-TYPE SYNTAX TSapIngressIPCriteriaExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular ip-criteria entry for a sap-ingress policy. This is an extenstion to tSapIngressIPCriteriaEntry. " AUGMENTS { tSapIngressIPCriteriaEntry } ::= { tSapIngressIPCriteriaExtnTable 1 } TSapIngressIPCriteriaExtnEntry ::= SEQUENCE { tSapIngressIPCriteriaActionProfile TProfileOrDei } tSapIngressIPCriteriaActionProfile OBJECT-TYPE SYNTAX TProfileOrDei MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressIPCriteriaActionProfile specifies the profile of the traffic that matches the specific IP criteria. The value none indicates that the profile is derived from ingress classification and profiling functions." DEFVAL { out } ::= { tSapIngressIPCriteriaExtnEntry 1 } --- tSapIngressMacCriteriaExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressMacCriteriaExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about mac-criteria entries. Extenstion to tSapIngressMacCriteriaEntry" ::= { tSASSapIngressObjects 7 } tSapIngressMacCriteriaExtnEntry OBJECT-TYPE SYNTAX TSapIngressMacCriteriaExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile." AUGMENTS { tSapIngressMacCriteriaEntry } ::= { tSapIngressMacCriteriaExtnTable 1 } TSapIngressMacCriteriaExtnEntry ::= SEQUENCE { tSapIngressMacCriteriaActionProfile TProfileOrDei } tSapIngressMacCriteriaActionProfile OBJECT-TYPE SYNTAX TProfileOrDei MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressMacCriteriaActionProfile specifies the profile of the traffic that matches the specific MAC criteria. The value none indicates that the profile is derived from ingress classification and profiling functions." DEFVAL { out } ::= { tSapIngressMacCriteriaExtnEntry 1 } --- tSapIngressIPv6CriteriaExtnTable OBJECT-TYPE SYNTAX SEQUENCE OF TSapIngressIPv6CriteriaExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "information about sap-ingress policies extenstion to tSapIngressIPv6CriteriaEntry" ::= { tSASSapIngressObjects 8 } tSapIngressIPv6CriteriaExtnEntry OBJECT-TYPE SYNTAX TSapIngressIPv6CriteriaExtnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular ip-criteria entry for a sap-ingress policy. This is an extenstion to tSapIngressIPv6CriteriaEntry. " AUGMENTS { tSapIngressIPv6CriteriaEntry } ::= { tSapIngressIPv6CriteriaExtnTable 1 } TSapIngressIPv6CriteriaExtnEntry ::= SEQUENCE { tSapIngressIPv6CriteriaActionProfile TProfileOrDei } tSapIngressIPv6CriteriaActionProfile OBJECT-TYPE SYNTAX TProfileOrDei MAX-ACCESS read-create STATUS current DESCRIPTION "tSapIngressIPv6CriteriaActionProfile specifies the profile of the traffic that matches the specific IP criteria. The value none indicates that the profile is derived from ingress classification and profiling functions." DEFVAL { out } ::= { tSapIngressIPv6CriteriaExtnEntry 1 } -- -- Conformance Information -- tmnxSASQosCompliances OBJECT IDENTIFIER ::= { tmnxSASQosConformance 1 } tmnxSASQosGroups OBJECT IDENTIFIER ::= { tmnxSASQosConformance 2 } tmnxSASQoSV1v0Group OBJECT-GROUP OBJECTS { tAccessEgressRowStatus, tAccessEgressScope, tAccessEgressDescription, tAccessEgressLastChanged, tAccessEgressRemark, tAccessEgressQueueRowStatus, tAccessEgressQueueCBS, tAccessEgressQueueMBS, tAccessEgressQueuePIRAdaptation, tAccessEgressQueueCIRAdaptation, tAccessEgressQueueAdminPIR, tAccessEgressQueueAdminCIR, tAccessEgressQueueOperPIR, tAccessEgressQueueOperCIR, tAccessEgressQueueLastChanged, tAccessEgressFCRowStatus, tAccessEgressFCQueue, tAccessEgressFCDot1PInProfile, tAccessEgressFCDot1POutProfile, tAccessEgressFCLastChanged, tSapIngressMeterRowStatus, tSapIngressMeterMCast, tSapIngressMeterAdminCBS, tSapIngressMeterAdminMBS, tSapIngressMeterOperCBS, tSapIngressMeterOperMBS, tSapIngressMeterCIRAdaptation, tSapIngressMeterPIRAdaptation, tSapIngressMeterAdminPIR, tSapIngressMeterAdminCIR, tSapIngressMeterOperPIR, tSapIngressMeterOperCIR, tSapIngressMeterLastChanged, tSapIngressMeterMode, tSapIngressMeterRateMode, tNetworkIngressFCExtnRowStatus, tNetworkIngressFCExtnMeter, tNetworkIngressFCExtnMCastMeter, tNetworkIngressFCExtnLastChanged, tNetworkIngressMeterRowStatus, tNetworkIngressMeterAdminCBS, tNetworkIngressMeterAdminMBS, tNetworkIngressMeterOperCBS, tNetworkIngressMeterOperMBS, tNetworkIngressMeterCIRAdaptation, tNetworkIngressMeterPIRAdaptation, tNetworkIngressMeterAdminPIR, tNetworkIngressMeterAdminCIR, tNetworkIngressMeterOperPIR, tNetworkIngressMeterOperCIR, tNetworkIngressMeterLastChanged, tNetworkIngressMeterMode, tNetworkIngressMeterMCast, tNetworkIngressMeterRateMode, tSlopeHiQueue1DropRate, tSlopeHiQueue2DropRate, tSlopeHiQueue3DropRate, tSlopeHiQueue4DropRate, tSlopeHiQueue5DropRate, tSlopeHiQueue6DropRate, tSlopeHiQueue7DropRate, tSlopeHiQueue8DropRate, tSlopeLoQueue1DropRate, tSlopeLoQueue2DropRate, tSlopeLoQueue3DropRate, tSlopeLoQueue4DropRate, tSlopeLoQueue5DropRate, tSlopeLoQueue6DropRate, tSlopeLoQueue7DropRate, tSlopeLoQueue8DropRate, tSlopeHiStartThreshold, tSlopeLoStartThreshold, tPortSchedulerPlcyMode, tPortSchedulerPlcyQuanta, tPortSchedulerPlcyQueue1Weight, tPortSchedulerPlcyQueue2Weight, tPortSchedulerPlcyQueue3Weight, tPortSchedulerPlcyQueue4Weight, tPortSchedulerPlcyQueue5Weight, tPortSchedulerPlcyQueue6Weight, tPortSchedulerPlcyQueue7Weight, tPortSchedulerPlcyQueue8Weight, tSapIngressFCMeter, tSapIngressFCMCastMeter, tSapIngressFCBCastMeter, tSapIngressFCUnknownMeter, sapIngQosMeterId, sapIngQosMeterStatsForwardedInProfPackets, sapIngQosMeterStatsForwardedOutProfPackets, sapIngQosMeterStatsForwardedInProfOctets, sapIngQosMeterStatsForwardedOutProfOctets, tQosIngressFrameBasedAccnt, tQosEgressFrameBasedAccnt, tSapIngressNumQosClassifiers } STATUS current DESCRIPTION " sas group object definition " ::= { tmnxSASQosGroups 1 } tmnxSASMQoSV1v0Group OBJECT-GROUP OBJECTS { tSlopePolicyQueueRowStatus, tSlopePolicyQueueLastChanged, tSlopePolicyQueueHiAdminStatus, tSlopePolicyQueueHiStartAverage, tSlopePolicyQueueHiMaxAverage, tSlopePolicyQueueHiMaxProbability, tSlopePolicyQueueLoAdminStatus, tSlopePolicyQueueLoStartAverage, tSlopePolicyQueueLoMaxAverage, tSlopePolicyQueueLoMaxProbability, tSlopePolicyQueueNonTcpAdminStatus, tSlopePolicyQueueNonTcpStartAverage, tSlopePolicyQueueNonTcpMaxAverage, tSlopePolicyQueueNonTcpMaxProbability, tSlopePolicyQueueTimeAvgFactor } STATUS current DESCRIPTION " SAS M specific group object definition " ::= { tmnxSASQosGroups 2 } tmnxSASQoSV2v0Group OBJECT-GROUP OBJECTS { tNetworkQueuePolicyName, tNetworkPolicyRemarkPolicyId, tNetworkPolicyType, tSapEgressQueuePolicyName, tSapEgressRemarkPolicyId, tSapEgressRemark, tAccessEgressRemarkPolicyId, tSASRemarkPolicyRowStatus, tSASRemarkPolicyDescription, tSASRemarkPolicyType, tSASRemarkPolicyDot1PInProfile, tSASRemarkPolicyDot1POutProfile, tSASRemarkPolicyDSCPInProfile, tSASRemarkPolicyDSCPOutProfile, tSASRemarkPolicyLspExpInProfile, tSASRemarkPolicyLspExpOutProfile, tSASRemarkPolicyDot1PLspExpInProfile, tSASRemarkPolicyDot1PLspExpOutProfile, tSASRemarkPolicyLastChanged, tQueueMgmtPolicyDescription, tQueueMgmtPolicyRowStatus, tQueueMgmtPolicyLastChanged, tQueueMgmtPolicyHiAdminStatus, tQueueMgmtPolicyHiStartAverage, tQueueMgmtPolicyHiMaxAverage, tQueueMgmtPolicyHiMaxProbability, tQueueMgmtPolicyLoAdminStatus, tQueueMgmtPolicyLoStartAverage, tQueueMgmtPolicyLoMaxAverage, tQueueMgmtPolicyLoMaxProbability, tQueueMgmtPolicyCBS, tQueueMgmtPolicyMBS, tQueueMgmtPolicyTimeAvgFactor, tQueueMgmtPolicyScope, tAccessEgressRowStatus, tAccessEgressScope, tAccessEgressDescription, tAccessEgressLastChanged, tAccessEgressRemark, tAccessEgressQueueRowStatus, tAccessEgressQueueCBS, tAccessEgressQueueMBS, tAccessEgressQueuePIRAdaptation, tAccessEgressQueueCIRAdaptation, tAccessEgressQueueAdminPIR, tAccessEgressQueueAdminCIR, tAccessEgressQueueOperPIR, tAccessEgressQueueOperCIR, tAccessEgressQueueLastChanged, tAccessEgressFCRowStatus, tAccessEgressFCQueue, tAccessEgressFCDot1PInProfile, tAccessEgressFCDot1POutProfile, tAccessEgressFCLastChanged, tSapIngressMeterRowStatus, tSapIngressMeterMCast, tSapIngressMeterAdminCBS, tSapIngressMeterAdminMBS, tSapIngressMeterOperCBS, tSapIngressMeterOperMBS, tSapIngressMeterCIRAdaptation, tSapIngressMeterPIRAdaptation, tSapIngressMeterAdminPIR, tSapIngressMeterAdminCIR, tSapIngressMeterOperPIR, tSapIngressMeterOperCIR, tSapIngressMeterLastChanged, tSapIngressMeterMode, tSapIngressMeterRateMode, tNetworkIngressFCExtnRowStatus, tNetworkIngressFCExtnMeter, tNetworkIngressFCExtnMCastMeter, tNetworkIngressFCExtnLastChanged, tNetworkIngressMeterRowStatus, tNetworkIngressMeterAdminCBS, tNetworkIngressMeterAdminMBS, tNetworkIngressMeterOperCBS, tNetworkIngressMeterOperMBS, tNetworkIngressMeterCIRAdaptation, tNetworkIngressMeterPIRAdaptation, tNetworkIngressMeterAdminPIR, tNetworkIngressMeterAdminCIR, tNetworkIngressMeterOperPIR, tNetworkIngressMeterOperCIR, tNetworkIngressMeterLastChanged, tNetworkIngressMeterMode, tNetworkIngressMeterMCast, tNetworkIngressMeterRateMode, tSlopeHiQueue1DropRate, tSlopeHiQueue2DropRate, tSlopeHiQueue3DropRate, tSlopeHiQueue4DropRate, tSlopeHiQueue5DropRate, tSlopeHiQueue6DropRate, tSlopeHiQueue7DropRate, tSlopeHiQueue8DropRate, tSlopeLoQueue1DropRate, tSlopeLoQueue2DropRate, tSlopeLoQueue3DropRate, tSlopeLoQueue4DropRate, tSlopeLoQueue5DropRate, tSlopeLoQueue6DropRate, tSlopeLoQueue7DropRate, tSlopeLoQueue8DropRate, tSlopeHiStartThreshold, tSlopeLoStartThreshold, tPortSchedulerPlcyMode, tPortSchedulerPlcyQuanta, tPortSchedulerPlcyQueue1Weight, tPortSchedulerPlcyQueue2Weight, tPortSchedulerPlcyQueue3Weight, tPortSchedulerPlcyQueue4Weight, tPortSchedulerPlcyQueue5Weight, tPortSchedulerPlcyQueue6Weight, tPortSchedulerPlcyQueue7Weight, tPortSchedulerPlcyQueue8Weight, tSapIngressFCMeter, tSapIngressFCMCastMeter, tSapIngressFCBCastMeter, tSapIngressFCUnknownMeter, sapIngQosMeterId, sapIngQosMeterStatsForwardedInProfPackets, sapIngQosMeterStatsForwardedOutProfPackets, sapIngQosMeterStatsForwardedInProfOctets, sapIngQosMeterStatsForwardedOutProfOctets, tQosIngressFrameBasedAccnt, tQosEgressFrameBasedAccnt, tSapIngressNumQosClassifiers, tSapIngressQosClassifiersRequiredInVpls, tSapIngressQosClassifiersRequiredInEpipe, tSapIngressQosMetersRequiredInVpls, tSapIngressQosMetersRequiredInEpipe, tSapIngressIPCriteriaMatch, tSapIngressMacCriteriaMatch, tSapIngressIPv6CriteriaEnable, tSapIngressIPv6CriteriaMatch, tNetworkEgressRemarkType, tSapIngressIPMacMatch } STATUS current DESCRIPTION " sas group object definition " ::= { tmnxSASQosGroups 3 } tmnxSASQosObsolete7210V2v0Group OBJECT-GROUP OBJECTS { tNetworkIngressMeterCBS, tNetworkIngressMeterMBS, tSapIngressMeterCBS, tSapIngressMeterMBS, tSapIngressQosClassifiersUsed, tSapIngressQosMetersUsed } STATUS current DESCRIPTION "The group of objects which are obsoleted from version 2.0 of Alcatel 7210 series systems." ::= { tmnxSASQosGroups 4} tmnxSASQos7210V4v0Group OBJECT-GROUP OBJECTS { tGlobalMplsLspExpProfile, tLdpLocalFcEnableAdminStatus, tLdpLocalFcEnableOperStatus, tMplsLspExpProfMapRowStatus, tMplsLspExpProfMapDescription, tAccessEgressRemarkType, tAccessEgressFCDscpInProfile, tAccessEgressFCDscpOutProfile, tSapIngressQueuePolicyName, tSapIngressIPCriteriaActionProfile, tSapIngressMacCriteriaActionProfile, tSapIngressIPv6CriteriaActionProfile, sapIngQosMeterStatsForwardedPackets, sapIngQosMeterStatsForwardedOctets, sapIngQosMeterStatsDroppedPackets, sapIngQosMeterStatsDroppedOctets } STATUS current DESCRIPTION "The group of objects which are obsoleted from version 4.0 of Alcatel 7210 series systems." ::= { tmnxSASQosGroups 5} tmnxSASQoSV10v0Group OBJECT-GROUP OBJECTS { tSapIngressQosClassifiersRequiredInIes, tSapIngressQosMetersRequiredInIes } STATUS current DESCRIPTION " sas group object definition version 7.0" ::= { tmnxSASQosGroups 6 } tmnxSASQoSComp7210V1v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 1.0 of TIMETRA-SAS-QOS-MIB." MODULE -- this module MANDATORY-GROUPS { tmnxSASQoSV1v0Group } ::= { tmnxSASQosCompliances 1 } tmnxSASQoSComp7210V2v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 2.0 of TIMETRA-SAS-QOS-MIB." MODULE -- this module MANDATORY-GROUPS { tmnxSASQoSV2v0Group } ::= { tmnxSASQosCompliances 2 } END