TIMETRA-ROUTE-POLICY-MIB DEFINITIONS ::= BEGIN IMPORTS InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressPrefixLength, InetAddressType, InetAutonomousSystemNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue FROM SNMPv2-TC timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs FROM TIMETRA-GLOBAL-MIB ClassIndexOrNone, IpAddressPrefixLength, TItemDescription, TLNamedItem, TLNamedItemOrEmpty, TNamedItem, TNamedItemOrEmpty, TPriorityOrUndefined, TXLPolicyNameOrExpOrEmpty, TmnxAddressAndPrefixAddress, TmnxAddressAndPrefixPrefix, TmnxAddressAndPrefixType, TmnxBGPFamilyType, TmnxBgpAutonomousSystem, TmnxBgpLocalPreference, TmnxBgpPreference, TmnxCreateOrigin, TmnxEnabledDisabled, TmnxServId FROM TIMETRA-TC-MIB ; timetraRoutePolicyMIBModule MODULE-IDENTITY LAST-UPDATED "202002010000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This is the SNMP MIB module to manage and provision route policies on Nokia SROS equipment. Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "202002010000Z" DESCRIPTION "Rev 20.0 01 Feb 2020 00:00 20.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201904010000Z" DESCRIPTION "Rev 19.0 01 April 2019 00:00 19.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201709010000Z" DESCRIPTION "Rev 16.0 01 Sept 2017 00:00 16.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201605010000Z" DESCRIPTION "Rev 15.0 01 May 2016 00:00 15.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201601010000Z" DESCRIPTION "Rev 14.0 01 Jan 2016 00:00 14.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201405010000Z" DESCRIPTION "Rev 13.0 01 May 2014 00:00 13.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201401010000Z" DESCRIPTION "Rev 12.0 01 Jan 2014 00:00 12.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201301010000Z" DESCRIPTION "Rev 11.0 01 Jan 2013 00:00 11.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201202280000Z" DESCRIPTION "Rev 10.0 28 Feb 2012 12:00 10.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "201102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200801010000Z" DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 6.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200603230000Z" DESCRIPTION "Rev 4.0 23 Mar 2006 00:00 4.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200501240000Z" DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 2.1 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200401150000Z" DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 2.0 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200308150000Z" DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 1.2 release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200301200000Z" DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 1.0 Release of the TIMETRA-ROUTE-POLICY-MIB." REVISION "200104300000Z" DESCRIPTION "Rev 0.1 30 Apr 2001 00:00 Initial version of the TIMETRA-ROUTE-POLICY-MIB." ::= { timetraSRMIBModules 17 } TASPathName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of an AS path. An empty string indicates that no AS Path has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TASPathGroupName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of an AS path group. An empty string indicates that no AS Path group has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TCommunityName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a community. An empty string indicates that no community has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TLCommunityName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a community. An empty string indicates that no community has been specified and is invalid when used as an index for a table." SYNTAX TLNamedItemOrEmpty TCommunityMember ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The member of a community. Can be one of the following: 1) [1..65535]:[0..65535] 2) An extended community in one of the following formats - target:[0..65535]:[0..4294967295] - origin:[0..65535]:[0..4294967295] - target::[0..65535] - origin::[0..65535] - target:[4-byte AS number]:[0..65535] - origin:[4-byte AS number]:[0..65535] 4-byte AS number - [0..4294967295] - target:& - origin:& - target:& - origin:& - bandwidth:[0..65535]:[0..16777215] - ext:xx[yy]:value xx - type value yy - sub type value - Value of the extended community value = 0 - Valid value = 1 - Not-Found value = 2 - Invalid - ext:[4300]:[0..2] - flowspec-set:[0..4294967295]:[0..16383] - flowspec-set-trans:[0..4294967295]:[0..16383] - ipv6-redirect: - color:: co-bits - 00, 01, 10 or 11 color-value - [0..4294967295] 3) A regular expression 4) A well known community i.e. one of the following keywords - llgr-stale - no-advertise - no-export - no-export-subconfed - no-llgr - null 5) A large community in one of the following formats: - [4-byte AS number]:[local-data]:[local-data] 4-byte AS number - [0..4294967295] local-data - [0..4294967295] - &&" SYNTAX DisplayString (SIZE (1..72)) TCommunityMemberExpression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TCommunityMemberExpression specifies a logical expression containing terms and operators. It can contain sub-expressions enclosed in round brackets. A term is a string of type TCommunityMember. An operator can be the string 'AND', 'OR', and 'NOT'." SYNTAX DisplayString TCommunityNameExpression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TCommunityNameExpression specifies a logical expression containing terms and operators. It can contain sub-expressions enclosed in round brackets. A term is a string of type TCommunityName. A term is enclosed in square brackets. An operator can be the string 'AND', 'OR', and 'NOT'." SYNTAX DisplayString TDampingName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a route damping policy. An empty string indicates that no damping policy has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TPrefixListName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a prefix list. An empty string indicates that no prefix list has been specified and is invalid when used as an index for a table." SYNTAX TNamedItemOrEmpty TLPolicyStatementName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The long name of a policy statement when used as an index to a table." SYNTAX TLNamedItem PolicyStatementNameOrEmpty ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The name of a policy statement when used as an index to a table." SYNTAX TNamedItemOrEmpty TRoutePolicyRegex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A regular expression string. The Regular expression string matches against 1) an AS_PATH string e.g. '100 200 300', 2) a community string e.g. '100:200' where 100 is the as-number, and 200 is the community-value. The regular expression is expressed in terms of a TERM, and an OPERATOR: A term is either: 1) an AS Number 2) a community value e.g. in 100:200, we have three tokens: (i) 100 is the as-number, (ii) ':' is the separator token, and (iii) 200 is the community-value 3) '.' - DOT is a wild card token which matches with either an AS Number or a Community. The list of operators are: 1) '|' - suggests an alternation. 2) '*' - multiple occurrences of the token. 3) '?' - 0 or 1 occurrence of token. 4) '+' - 1 or more occurrences of token. 5) '(' - is used to parenthesize so that a regular expression is considered as one token. 6) ')' - closes the parenthesis. 7) '[' - used to demarcate range. 8) ']' - closes the box bracket. 9) '{m, [n]}' - suggest that the term can occur anywhere between m, and n times. 10) '^' - matches the beginning of the string - only allowed for communities. 11) '$' - matches the end of the string - only allowed for communities. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. The EBNF description for the regular expression string are: 1) reg_ex ::= empty_string | non-empty_reg_ex 2) non-empty_reg_ex ::= bounded_element | ( bounded_element '|' non-empty_reg_ex ) 3) bounded_element ::= ['^'] element ['$'] 4) element ::= ( '(' list ')' | atomic ) ['*' | '?' | '+' | '{' integer ',' [ integer ] '}' ] [element] 5) list ::= element | (element '|' list) 6) atomic ::= '.' | ':' | '<' | '>' | atom_list 7) atom_list ::= atom | ( '[' atom_list_boxed ) 8) atom_list_boxed ::= ( atom ']' ) | ( atom atom_list_boxed ) 9) (for as-path reg-ex) atom ::= integer [ '-' integer ] an atom is essentially EQUIVALENT to a TERM (for community reg-ex) atom ::= digit[ '-' digit ] NOTE -> atom_list_boxed is a list of integers ending in box bracket - BNF description is error-free." SYNTAX DisplayString TPolicyStatementEntryID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identification number for a policy statement entry. Entries are sorted by ID number. Matching entries are evaluated in order from lowest ID to highest ID. We suggest ordering policy statement entry IDs by 10s: 10, 20, 30, etc., so entry insertions are easy." SYNTAX Unsigned32 TRoutePolicyProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A list of routing protocols, for -to and -from policies." SYNTAX INTEGER { none (1), direct (2), static (3), bgp (4), isis (5), ospf (6), rip (7), aggregate (8), bgpVpn (9), igmp (10), pim (11), ospf3 (12), ldp (13), subscriber (14), mld (15), managed (16), msdp (17), vpnLeak (18), mobileHost (19), tms (20), nat (21), periodic (22), ipsec (23), mpls (24), dhcpv6Pd (25), dhcpv6Na (26), dhcpv6Ta (27), dhcpv6PdExcl (28), ripng (29), bgpEvpn (30), bgpLabel (31), directInterface (32), arpNd (33), ribApi (34), ndRa (35), reserved36 (36), evpnIfl (37), evpnIff (38) } TRoutePolicyProtocolBits ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TRoutePolicyProtocolBits is a BITS construct that specifies routing protocols for -to and -from policies." SYNTAX BITS { invalid (0), none (1), direct (2), static (3), bgp (4), isis (5), ospf (6), rip (7), aggregate (8), bgpVpn (9), igmp (10), pim (11), ospf3 (12), ldp (13), subscriber (14), mld (15), managed (16), msdp (17), vpnLeak (18), mobileHost (19), tms (20), nat (21), periodic (22), ipsec (23), mpls (24), dhcpv6Pd (25), dhcpv6Na (26), dhcpv6Ta (27), dhcpv6PdExcl (28), ripng (29), bgpEvpn (30), bgpLabel (31), directInterface (32), arpNd (33), ribApi (34), ndRa (35), reserved36 (36), evpnIfl (37), evpnIff (38) } TOspfRouteType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The OSPF route type. Set to zero to disable." SYNTAX Integer32 (0 | 1 | 2) TIsisLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the ISIS Route Level match criterion. A value of 0 indicates no IS-IS route match criterion is configured. There are two types of areas in IS-IS, namely Level 1 areas and Level 2 areas. Routers within a Level 1 area route to other routers in that area. If the destination does not exist within the area, the Level 1 router will route toward a Level 2 router. Level 2 routers route between areas and toward other ASs." SYNTAX Integer32 (0 | 1 | 2) TPolicyEntryAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Action to take when route matches the entry's match criteria. accept(1) - perform the accept-action modifications, advertise the route, do not evaluate any more policy entries. reject(2) - perform the reject-action modifications, do not advertise the route, do not evaluate any more policy entries. continue(3) - perform the accept-action modifications, evaluate the next policy entry in the policy statement. nextPolicy(4) - perform the accept-action modifications, evaluate the next policy statement." SYNTAX INTEGER { none (0), accept (1), reject (2), continue (3), nextPolicy (4) } TPolicyEntryEdit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Editing action to take when route matches the entry's match criteria. none(1) - do not change the value in the route add(2) - add the corresponding objects to the route remove(3) - remove the corresponding objects to the route replace(4) - replace the value in the route with the corresponding object." SYNTAX INTEGER { none (1), add (2), remove (3), replace (4) } TPolicyEntryCriteriaOrigin ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Origin of the route. none(1) - ignore this criteria igp(2) - learned from an Interior Gateway Protocol (OSPF, ISIS, etc.) egp(3) - learned from an Exterior Gateway Protocol (BGP) incomplete(4) - Route origin is unknown (usually due to aggregation) any(5) - to or from either igp or egp aaa(6) - subscriber host address originated from aaa dynamic(7) - subscriber host address originated from a dynamic source static(8) - subscriber host address originated from a static source bonding(9) - subscriber host address originated from a bonding source." SYNTAX INTEGER { none (1), igp (2), egp (3), incomplete (4), any (5), aaa (6), dynamic (7), static (8), bonding (9) } TPolicyActionTag ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Tag value to set. Zero means disabled, no tag value will be set." SYNTAX Unsigned32 (0..4294967295) TPolicyEntryCriteriaState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Generic criteria state. none(1) - ignore this criteria srrpMaster(2) - srrp-master srrpNonMaster(3) - srrp-non-master mobileMaster (4), - Identifies routes that are in mobile-master state mobileSlave (5), - Identifies routes that are in mobile-slave state. ipsecMaster (6), - Routes that are in ipsec-master with peer state ipsecMasterNoPeer (7), - Routes that are ipsec-master-without-peer ipsecNonMaster (8) - Routes that in ipsec-non-master state mobilePreSlave (9) - Identifies routes that are in mobile-pre-slave state" SYNTAX INTEGER { none (1), srrpMaster (2), srrpNonMaster (3), mobileMaster (4), mobileSlave (5), ipsecMaster (6), ipsecMasterNoPeer (7), ipsecNonMaster (8), mobilePreSlave (9) } TPolicyActionMetricSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The source of the Action Metric." SYNTAX INTEGER { igpCost (1), metricVal (2), metricParam (3) } TPolicyEntryAigpMetricEdit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Editing action to take when route matches the entry's match criteria. none(1) - do not change the value in the route. add(2) - add the corresponding object value to the aigp value in the received route. replace(3) - replace the aigp value in the route with the corresponding object value. useIgp(4) - replace the aigp value in the route with the IGP cost." SYNTAX INTEGER { none (1), add (2), replace (3), useIgp (4) } TPolicyEntryCriteriaMvpnType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BGP MVPN Route types. none(0) - ignore this criterion intraAsIpmsiAutoDiscovery(1) - Intra-AS I-PMSI Auto Discovery interAsIpmsiAutoDiscovery(2) - Inter-AS I-PMSI Auto Discovery sPmsiAutoDiscovery(3) - S-PMSI Auto discovery intraAsSegmentLeafAutoDiscovery(4) - Intra-AS Segment Leaf Auto Discovery sourceActiveAutoDiscovery(5) - Source Active Auto Discovery sharedTreeJoin(6) - Shared Tree Join (C-multicast) sourceTreeJoin(7) - Source Tree Join (C-multicast)" SYNTAX INTEGER { none (0), intraAsIpmsiAutoDiscovery (1), interAsIpmsiAutoDiscovery (2), sPmsiAutoDiscovery (3), intraAsSegmentLeafAutoDiscovery (4), sourceActiveAutoDiscovery (5), sharedTreeJoin (6), sourceTreeJoin (7) } TPolicyEntryCriteriaEvpnType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "BGP EVPN Route types. none(0) - ignore this criterion ethernetAutoDiscovery(1) - Ethernet Auto Discovery macIpAdvertisement(2) - MAC/IP advertisement inclusiveMulticast(3) - Inclusive Multicast ethernetSegment(4) - Ethernet Segment ipPrefix(5) - IP Prefix selectiveMulticast(6) - Selective Multicast Ethernet Tag (SMET) multicastJoinSync(7) - Multicast Join Sync multicastLeaveSync(8) - Multicast Leave Sync" SYNTAX INTEGER { none (0), ethernetAutoDiscovery (1), macIpAdvertisement (2), inclusiveMulticast (3), ethernetSegment (4), ipPrefix (5), selectiveMulticast (6), multicastJoinSync (7), multicastLeaveSync (8) } TPolicyVariableName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyVariableName specifies a variable that is used as TASPathName, TASPathGroupName, TPrefixListName, TCommunityName or TDampingName. The first and last character of a variable is the at-sign (@)." SYNTAX TNamedItem TPolicyAdvertiseLabelMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of TPolicyAdvertiseLabelMode specifies the advertisement label mode. none(0) - use the label mode of the VRF, i.e. label-per-nexthop (LPN) or label-per-VRF. perPrefix(1) - use label-per-prefix (LPP) mode for routes that match the policy. pop(2) - use POP label for importing routes from the route table (RTM)." SYNTAX INTEGER { none (0), perPrefix (1), pop (2) } TPolicyVariableType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of TPolicyVariableType specifies to which type the TPolicyVariableName is to be resolved." SYNTAX INTEGER { string (1), integer (2), address (3), decimal (4) } TPolicyDecimal ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyDecimal specifies a floating-point value with maximum 3 digits behind the decimal point, e.g. '0.125'. The configured value will always be returned as a decimal with 3 digits behind the decimal point; e.g. '150' will be returned as '150.000'. The supported decimal range is '0.000..4294967295.000'." SYNTAX DisplayString (SIZE (1..14)) TPolicyVariableNameOrEmpty ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of TPolicyVariableNameOrEmpty specifies a variable name TPolicyVariableName that is used as parameter. An empty string indicates that no parameter has been specified. The first and last character of a variable name is the at-sign (@)." SYNTAX TNamedItemOrEmpty TPolicyActionSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The source of the Action item." SYNTAX INTEGER { actionValue (1), actionParam (2) } TPrefixListNameExpression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPrefixListNameExpression specifies a logical expression containing terms and operators. A term is a string of type TPrefixListName. A term is enclosed in square brackets. The string 'all' or 'none' can be added after the term. If 'all' is specified, all of the entries in the prefix list should match a route in the route table (RTM) for the expression to be considered 'TRUE'. If 'none' is specified, none of the entries in the prefix list may match a route in the route table (RTM) for the expression to be considered 'TRUE'. If neither 'none' nor 'all' is specified, at least one entry in the prefix list should match a route in the route table (RTM) for the expression to be considered 'TRUE'." SYNTAX DisplayString TPolicyCritPathType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The path type of a BGP route to be used as match criteria. none(1) - the criteria is disabled. ibgp(2) - match on routes learned from an IBGP or confed-EBGP peer. ebgp(3) - match on routes learned from an EBGP peer." SYNTAX INTEGER { none (1), ibgp (2), ebgp (3) } TPolicyCritCommunityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The community type of a BGP route to be counted as match criteria. all (1) - all communities are counted. standard (2) - only the standard communities are counted. extended (3) - only the extended communities are counted. large (4) - only the large communities are counted." SYNTAX INTEGER { all (1), standard (2), extended (3), large (4) } TPolicyValueOrVarNameOrEmpty ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyValueOrVarNameOrEmpty specifies a value or a variable name TPolicyVariableName that needs to be resolved to get the value. An empty string indicates that no value has been specified. The first and last character of a variable name is the at-sign (@)." SYNTAX TNamedItemOrEmpty TPolicyMatchIndicator ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyMatchIndicator specifies whether higher or lower values are accepted for the related match criteria. equal (1) - it must be an exact match. orHigher (2) - equal or greater values result in a match. orLower (3) - equal or less values result in a match." SYNTAX INTEGER { equal (1), orHigher (2), orLower (3) } TPolicyAddPathSendLimit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyAddPathSendLimit specifies the maximum number of paths that can be advertised to ADD-PATH peers per prefix. The value -1 indicates that BGP must send exactly the number of best multipaths it has for each NLRI." SYNTAX Integer32 (-1 | 0..16) TPolicyAdminTagPolicyOrVarName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyAdminTagPolicyOrVarName specifies the administrative tag policy or a variable name that needs to be resolved to get the administrative tag policy. The first and last character of a variable name is the at-sign (@). A variable name can also be used as mid-string in the administrative tag policy An empty string indicates that no administrative tag policy or variable name has been specified." SYNTAX TLNamedItemOrEmpty TPolicyBgpMedSource ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyBgpMedSource specifies the source of the BGP MED. none (0) - ignore this action. igp (1) - use the IGP cost as BGP MED. minIgp (2) - use the minimum IGP cost as BGP MED. medValue (3) - use the configured value as BGP MED. expression (4) - use the value resolved from the expression as BGP MED." SYNTAX INTEGER { none (0), igp (1), minIgp (2), medValue (3), expression (4) } TPolicyBgpMedExpression ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TPolicyBgpMedExpression specifies an expression containing terms and operators. A term is either: 1) _igp_ (predefined variable holding the IGP cost) 2) _med_ (predefined variable holding the received MED value) 3) a floating point value 4) a policy variable 5) another expression surrounded by parentheses() A BGP MED expression must contain at least one occurence of either '_igp_' or '_med'. The list of supported operators are: 1) '*' - multiply 2) '+' - add 3) '-' - subtract BGP MED expression examples: - '_med_ * 0.125' - '(_igp + 100) * @med-multiplier@' - '_med_ + _igp_ + 50'" SYNTAX DisplayString (SIZE (0..64)) tRoutePolicyObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 17 } tRPOperObjects OBJECT IDENTIFIER ::= { tRoutePolicyObjects 1 } tRPOperValueObjects OBJECT IDENTIFIER ::= { tRPOperObjects 1 } tRPOperASPathTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperASPathTable. tRPOperASPathTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 1 } tRPOperASPathTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of AS Path names and corresponding regular expressions." ::= { tRPOperValueObjects 2 } tRPOperASPathEntry OBJECT-TYPE SYNTAX TRPOperASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular AS Path Name. Entries are created and deleted by the user via tRPAdminASPathTable." INDEX { tRPOperASPathName } ::= { tRPOperASPathTable 1 } TRPOperASPathEntry ::= SEQUENCE { tRPOperASPathName TASPathName, tRPOperASPathRowStatus RowStatus, tRPOperASPathRegEx TRoutePolicyRegex, tRPOperASPathEntryLastChanged TimeStamp, tRPOperASPathCreationOrigin TmnxCreateOrigin } tRPOperASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the AS Path entry used to uniquely identify an AS Path." ::= { tRPOperASPathEntry 1 } tRPOperASPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperASPathRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminASPathTable." ::= { tRPOperASPathEntry 2 } tRPOperASPathRegEx OBJECT-TYPE SYNTAX TRoutePolicyRegex MAX-ACCESS read-only STATUS current DESCRIPTION "The regular expression for the AS Path entry." ::= { tRPOperASPathEntry 3 } tRPOperASPathEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperASPathEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperASPathEntry 4 } tRPOperASPathCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperASPathCreationOrigin indicates the mechanism used to create this entry." ::= { tRPOperASPathEntry 5 } tRPOperCommunityTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperCommunityTable. tRPOperCommunityTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 3 } tRPOperCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPOperValueObjects 4 } tRPOperCommunityEntry OBJECT-TYPE SYNTAX TRPOperCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community member. Entries are created and deleted by the user via tRPAdminCommunityTable." INDEX { tRPOperCommunityName, tRPOperCommunityMember } ::= { tRPOperCommunityTable 1 } TRPOperCommunityEntry ::= SEQUENCE { tRPOperCommunityName TLCommunityName, tRPOperCommunityMember TCommunityMember, tRPOperCommunityRowStatus RowStatus, tRPOperCommunityEntryLastChanged TimeStamp, tRPOperCommunityCreationOrigin TmnxCreateOrigin } tRPOperCommunityName OBJECT-TYPE SYNTAX TLCommunityName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the community used as an index for this table." ::= { tRPOperCommunityEntry 1 } tRPOperCommunityMember OBJECT-TYPE SYNTAX TCommunityMember MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AS Number or Community ID of the community member. The community name and the member name uniquely identify a row in this table." ::= { tRPOperCommunityEntry 2 } tRPOperCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperCommunityRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminCommunityTable." ::= { tRPOperCommunityEntry 3 } tRPOperCommunityEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperCommunityEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperCommunityEntry 4 } tRPOperCommunityCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperCommunityCreationOrigin indicates the mechanism used to create this entry." ::= { tRPOperCommunityEntry 5 } tRPOperDampingTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperDampingTable. tRPOperDampingTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 5 } tRPOperDampingTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of route damping control entries." ::= { tRPOperValueObjects 6 } tRPOperDampingEntry OBJECT-TYPE SYNTAX TRPOperDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Damping entry. Entries are created and deleted by the user via tRPAdminDampingTable." INDEX { tRPOperDampingName } ::= { tRPOperDampingTable 1 } TRPOperDampingEntry ::= SEQUENCE { tRPOperDampingName TDampingName, tRPOperDampingRowStatus RowStatus, tRPOperDampingHalfLife Unsigned32, tRPOperDampingMaxSuppress Unsigned32, tRPOperDampingReuse Unsigned32, tRPOperDampingSuppress Unsigned32, tRPOperDampingEntryLastChanged TimeStamp, tRPOperDampingCreationOrigin TmnxCreateOrigin } tRPOperDampingName OBJECT-TYPE SYNTAX TDampingName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the damping entry used to uniquely identify a row in this table." ::= { tRPOperDampingEntry 1 } tRPOperDampingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminDampingTable." ::= { tRPOperDampingEntry 2 } tRPOperDampingHalfLife OBJECT-TYPE SYNTAX Unsigned32 (0..45) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the half-life, in minutes, for a routes figure-of-merit after it has been dampened. If a route's half-life is set to 15 minutes and has a figure-of-merit of 1500, after 15 minutes, the route's figure-of-merit will have decayed to 750. Set to 0 to disable." ::= { tRPOperDampingEntry 3 } tRPOperDampingMaxSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..720) UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum amount of time, in minutes, that a route can be suppressed for. Set to 0 to disable." ::= { tRPOperDampingEntry 4 } tRPOperDampingReuse OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the reuse threshold. If a route's figure-of-merit falls below the reuse threshold, the route can be reused. Set to 0 to disable." ::= { tRPOperDampingEntry 5 } tRPOperDampingSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the suppress threshold. If a route's figure-of-merit goes above the suppress threshold, the route should be suppressed. Set to 0 to disable." ::= { tRPOperDampingEntry 6 } tRPOperDampingEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperDampingEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperDampingEntry 7 } tRPOperDampingCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperDampingCreationOrigin indicates the mechanism used to create this entry." ::= { tRPOperDampingEntry 8 } tRPOperPrefixListTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPrefixListTable. tRPOperPrefixListTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 7 } tRPOperPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix lists." ::= { tRPOperValueObjects 8 } tRPOperPrefixListEntry OBJECT-TYPE SYNTAX TRPOperPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular prefix list. Entries are created and deleted by the user via tRPAdminPrefixListTable." INDEX { tRPOperPrefixListName, tRPOperPrefixListIpPrefix, tRPOperPrefixListMask, tRPOperPrefixListType } ::= { tRPOperPrefixListTable 1 } TRPOperPrefixListEntry ::= SEQUENCE { tRPOperPrefixListName TPrefixListName, tRPOperPrefixListIpPrefix IpAddress, tRPOperPrefixListMask IpAddressPrefixLength, tRPOperPrefixListRowStatus RowStatus, tRPOperPrefixListType INTEGER, tRPOperPrefixListThroughLength IpAddressPrefixLength, tRPOperPrefixListEntryLastChanged TimeStamp, tRPOperPrefixListBeginLength IpAddressPrefixLength } tRPOperPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the prefix list entry." ::= { tRPOperPrefixListEntry 1 } tRPOperPrefixListIpPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP prefix of the prefix list entry." ::= { tRPOperPrefixListEntry 2 } tRPOperPrefixListMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP mask length of the prefix list entry." ::= { tRPOperPrefixListEntry 3 } tRPOperPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPrefixListTable." ::= { tRPOperPrefixListEntry 4 } tRPOperPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact (1), longer (2), through (3), range (4), to (5), addressMask (6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPOperPrefixListBeginLength and less than or equal to the length defined by tRPOperPrefixListThroughLength in order for an entry to be considered a match. to (5) - a route's prefix/length must match the condition from a start prefix/length to an end prefix/length. The end prefix/length is indicated in the corresponding entry in the tRPOperPfxListToTable. addressMask (6) - a route's prefix/length must match the prefix length of the prefix-list entry and the bitwise logical AND of the route address and the mask must match the bitwise logical AND from the prefix-list address and the mask. The address mask must be specified in a corresponding entry in the tRPOperPfxListAddressMaskTable." ::= { tRPOperPrefixListEntry 5 } tRPOperPrefixListThroughLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "When tRPOperPrefixListType set to through(3), the mask length to use. Must be larger than tRPOperPrefixListMask." ::= { tRPOperPrefixListEntry 6 } tRPOperPrefixListEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPrefixListEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPrefixListEntry 7 } tRPOperPrefixListBeginLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "When tRPOperPrefixListType set to range(4), the mask length to use as the lower limit for the mask range. Must be larger than tRPOperPrefixListMask and less than tRPOperPrefixListThroughLength." ::= { tRPOperPrefixListEntry 8 } tRPOperPolicyStatementTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPolicyStatementTable. tRPOperPolicyStatementTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 9 } tRPOperPolicyStatementTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control table for policy statements." ::= { tRPOperValueObjects 10 } tRPOperPolicyStatementEntry OBJECT-TYPE SYNTAX TRPOperPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy statement. Entries are created by user via tRPAdminPolicyStatementTable. Entries are deleted by user via tRPAdminPolicyStatementTable." INDEX { tRPOperPolicyStatementName } ::= { tRPOperPolicyStatementTable 1 } TRPOperPolicyStatementEntry ::= SEQUENCE { tRPOperPolicyStatementName TLPolicyStatementName, tRPOperPolicyStatementRowStatus RowStatus, tRPOperPolicyStatementDescription TItemDescription, tRPOperPolicyStatementDefaultAction TPolicyEntryAction, tRPOperPolicyStatementEntryLastChanged TimeStamp, tRPOperPolicyStatementCrOrigin TmnxCreateOrigin } tRPOperPolicyStatementName OBJECT-TYPE SYNTAX TLPolicyStatementName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of this policy statement that uniquely identifies an entry in this table." ::= { tRPOperPolicyStatementEntry 1 } tRPOperPolicyStatementRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPolicyStatementRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPolicyStatementTable." ::= { tRPOperPolicyStatementEntry 2 } tRPOperPolicyStatementDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this policy statement." ::= { tRPOperPolicyStatementEntry 3 } tRPOperPolicyStatementDefaultAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-only STATUS current DESCRIPTION "The default action for the policy statement indicates what happens to the route if none of the policy statement entries match." ::= { tRPOperPolicyStatementEntry 4 } tRPOperPolicyStatementEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPolicyStatementEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPolicyStatementEntry 5 } tRPOperPolicyStatementCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPolicyStatementCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperPolicyStatementEntry 6 } tRPOperPSDefaultActionParamsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSDefaultActionParamsTable. tRPOperPSDefaultActionParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 11 } tRPOperPSDefaultActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action parameters for a policy statement." ::= { tRPOperValueObjects 12 } tRPOperPSDefaultActionParamsEntry OBJECT-TYPE SYNTAX TRPOperPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These parameters are applied when the default action for the policy statement (tRPOperPolicyStatementDefaultAction) is 'accept(1)'. Entries are created when tRPOperPolicyStatementDefaultAction is 'accept(1)', 'reject(2)', 'continue(3)' or 'nextPolicy(4)'. Entries are deleted when a policy statement is destroyed or tRPOperPolicyStatementDefaultAction is 'none(0)'." INDEX { tRPOperPolicyStatementName } ::= { tRPOperPSDefaultActionParamsTable 1 } TRPOperPSDefaultActionParamsEntry ::= SEQUENCE { tRPOperPSDefaultActionASPath TPolicyEntryEdit, tRPOperPSDefaultActionASPathName TASPathName, tRPOperPSDefaultActionASPathPrependAS TmnxBgpAutonomousSystem, tRPOperPSDefaultActionASPathPrependCount Integer32, tRPOperPSDefaultActionCommunity1 TPolicyEntryEdit, tRPOperPSDefaultActionCommunityName1 TCommunityName, tRPOperPSDefaultActionCommunity2 TPolicyEntryEdit, tRPOperPSDefaultActionCommunityName2 TCommunityName, tRPOperPSDefaultActionOrigin TPolicyEntryCriteriaOrigin, tRPOperPSDefaultActionLocalPreferenceSet TruthValue, tRPOperPSDefaultActionLocalPreference TmnxBgpLocalPreference, tRPOperPSDefaultActionMetric TPolicyEntryEdit, tRPOperPSDefaultActionMetricValue Unsigned32, tRPOperPSDefaultActionPreference TmnxBgpPreference, tRPOperPSDefaultActionDamping TDampingName, tRPOperPSDefaultActionNextHopSelf TruthValue, tRPOperPSDefaultActionNextHop IpAddress, tRPOperPSDefaultActionTag TPolicyActionTag, tRPOperPSDefaultActionOspfType TOspfRouteType, tRPOperPSDefaultActionParamsEntryLastChanged TimeStamp, tRPOperPSDefActInetNextHopType InetAddressType, tRPOperPSDefActInetNextHop InetAddress, tRPOperPSDefaultActionASPathPend InetAutonomousSystemNumber, tRPOperPSDefActMcRedirSvcId TmnxServId, tRPOperPSDefActMcRedirIfIndex InterfaceIndexOrZero, tRPOperPSDefActionMetricSource TPolicyActionMetricSource, tRPOperPSDefActionAigpMetric TPolicyEntryAigpMetricEdit, tRPOperPSDefActnAigpMetricVal Unsigned32, tRPOperPSDefActnSrcClassIndex ClassIndexOrNone, tRPOperPSDefActnDstClassIndex ClassIndexOrNone, tRPOperPSDefActnOrigValidState INTEGER } tRPOperPSDefaultActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Path rewrite information for the route." ::= { tRPOperPSDefaultActionParamsEntry 1 } tRPOperPSDefaultActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Path name to use for add, remove, or replace operation specified by tRPOperPSDefaultActionASPath. Ignored when tRPOperPSDefaultActionASPath is none(1)." ::= { tRPOperPSDefaultActionParamsEntry 2 } tRPOperPSDefaultActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-only STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPOperPSDefaultActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPOperPSDefaultActionASPathPend." ::= { tRPOperPSDefaultActionParamsEntry 3 } tRPOperPSDefaultActionASPathPrependCount OBJECT-TYPE SYNTAX Integer32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times tRPOperPSDefaultActionASPathPend is prepended to the AS-Path attribute of the route. Set to zero to disable. The value of this object tRPOperPSDefaultActionASPathPrependCount is ignored when the object tRPOperPSDefActASPPendCountSrc has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 4 } tRPOperPSDefaultActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS obsolete DESCRIPTION "How to apply tRPOperPSDefaultActionCommunityName1 to the communities for the route. Set to none(1) to disable this feature. This object is obsoleted in release 11.0. It is replaced by tRPOperPSDefActionAddCommEntry, tRPOperPSDefActionRemCommEntry, and tRPOperPSDefActionRepCommEntry." ::= { tRPOperPSDefaultActionParamsEntry 5 } tRPOperPSDefaultActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPOperPSDefaultActionCommunity1 is none(1). This object is obsoleted in release 11.0. It is replaced by tRPOperPSDefActionAddCommEntry, tRPOperPSDefActionRemCommEntry, and tRPOperPSDefActionRepCommEntry." ::= { tRPOperPSDefaultActionParamsEntry 6 } tRPOperPSDefaultActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS obsolete DESCRIPTION "How to apply tRPOperPSDefaultActionCommunityName2 to the communities for the route. Set to none(1) to disable this feature. This object is obsoleted in release 11.0. It is replaced by tRPOperPSDefActionAddCommEntry, tRPOperPSDefActionRemCommEntry, and tRPOperPSDefActionRepCommEntry." ::= { tRPOperPSDefaultActionParamsEntry 7 } tRPOperPSDefaultActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPOperPSDefaultActionCommunity2 is none(1). This object is obsoleted in release 11.0. It is replaced by tRPOperPSDefActionAddCommEntry, tRPOperPSDefActionRemCommEntry, and tRPOperPSDefActionRepCommEntry." ::= { tRPOperPSDefaultActionParamsEntry 8 } tRPOperPSDefaultActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionOrigin indicates the origin of the route exported into BGP if it does not match an entry. The value of this object tRPOperPSDefaultActionOrigin is ignored when the object tRPOperPSDefActOriginSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 9 } tRPOperPSDefaultActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When set to true(1), use the value of tRPOperPSDefaultActionLocalPreference for local preference. When the value of tRPOperPSDefActLocalPrefSource has a value different from actionValue(1), the value of tRPOperPSDefaultActionLocalPreferenceSet and tRPOperPSDefaultActionLocalPreference are ignored." ::= { tRPOperPSDefaultActionParamsEntry 10 } tRPOperPSDefaultActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Local preference to apply to the route. Set tRPOperPSDefaultActionLocalPreferenceSet to false(2) to disable. The value of this object tRPOperPSDefaultActionLocalPreference is ignored when the object tRPOperPSDefActLocalPrefSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 11 } tRPOperPSDefaultActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "Action for tRPOperPSDefaultActionMetricValue or the metric value resolved from tRPOperPSDefActMetricParam depending on the tRPOperPSDefActionMetricSource." ::= { tRPOperPSDefaultActionParamsEntry 12 } tRPOperPSDefaultActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Add, subtract, or set metric value. Ignored when tRPOperPSDefaultActionMetric is none(1). The value of this object tRPOperPSDefaultActionMetricValue is ignored when the object tRPOperPSDefActionMetricSource has a value different from metricVal(2)." ::= { tRPOperPSDefaultActionParamsEntry 13 } tRPOperPSDefaultActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Preference to apply to the route. The value of this object tRPOperPSDefaultActionPreference is ignored when the object tRPOperPSDefActPreferenceSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 15 } tRPOperPSDefaultActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-only STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." ::= { tRPOperPSDefaultActionParamsEntry 16 } tRPOperPSDefaultActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionNextHopSelf indicates the next-hop-self on the route. Next-hop-self cannot be 'true' when the other next-hop objects have a non-default value. When this object has a value of 'true' then tRPOperPSDefActNextHopPeerAddr, tRPOperPSDefaultActionNextHop, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop tRPOperPSDefActNextHopSource and tRPOperPSDefActNextHopParam objects are disabled." ::= { tRPOperPSDefaultActionParamsEntry 17 } tRPOperPSDefaultActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionNextHop indicates the next-hop IPv4 address in the route. The object is disabled if it holds the value 255.255.255.255. Next-hop cannot be a valid IP address when the next-hop-self or peer-address is 'true'. When this object has a valid IP address then tRPOperPSDefaultActionNextHopSelf and tRPOperPSDefActNextHopPeerAddr are 'false'. This object is the same as tRPOperPSDefActInetNextHop when a valid IPv4 address is set. Please use tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPOperPSDefActNextHopSource and tRPOperPSDefActNextHopParam for extended next-hop address support." ::= { tRPOperPSDefaultActionParamsEntry 18 } tRPOperPSDefaultActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionTag indicates the operational tag for the route. A value of 0 for tRPOperPSDefaultActionTag indicates that tagging is disabled. The value of this object tRPOperPSDefaultActionTag is ignored when the object tRPOperPSDefActTagSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 19 } tRPOperPSDefaultActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF route type for the route. The value of this object tRPOperPSDefaultActionOspfType is ignored when the object tRPOperPSDefActOspfTypeSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 20 } tRPOperPSDefaultActionParamsEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSDefaultActionParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSDefaultActionParamsEntry 21 } tRPOperPSDefActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActInetNextHopType indicates the type of tRPOperPSDefActInetNextHop address, as defined in the InetAddress MIB. The value of this object tRPOperPSDefActInetNextHopType and tRPOperPSDefActInetNextHop are ignored when the object tRPOperPSDefActNextHopSource has a value different then actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 22 } tRPOperPSDefActInetNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActInetNextHop indicates the next-hop IP address in the route. The object tRPOperPSDefActInetNextHop is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSDefActInetNextHopType object. Next-hop cannot be a valid IP address when the next-hop-self or peer-address is 'true'. When this object has a valid IP address then tRPOperPSDefaultActionNextHopSelf and tRPOperPSDefActNextHopPeerAddr are 'false'. tRPOperPSDefActInetNextHop object replaces tRPOperPSDefaultActionNextHop that supports only IPv4 address style next-hop. The value of this object tRPOperPSDefActInetNextHop is ignored when the object tRPOperPSDefActNextHopSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 23 } tRPOperPSDefaultActionASPathPend OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefaultActionASPathPend indicates the AS Number to prepend to the AS-Path attribute of the route. The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPOperPSDefaultActionASPathPrependCount is zero and tRPOperPSDefActASPPendCountSrc is set to actionValue(1). The value of this object tRPOperPSDefaultActionASPathPend is ignored when the object tRPOperPSDefActASPathPendSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 24 } tRPOperPSDefActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActMcRedirSvcId indicates the service ID of the service where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." ::= { tRPOperPSDefaultActionParamsEntry 30 } tRPOperPSDefActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActMcRedirIfIndex indicates the interface index of the interface where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." ::= { tRPOperPSDefaultActionParamsEntry 31 } tRPOperPSDefActionMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionMetricSource indicates the source of the default action metric. The value 'igpCost(1)' means that the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route and the value of the object tRPOperPSDefaultActionMetricValue and the object tRPOperPSDefActMetricParam are ignored. The value 'metricVal(2)' means the metric value is the value of tRPOperPSDefaultActionMetricValue. The value of the object tRPOperPSDefActMetricParam is ignored. The value 'metricParam(3) means the metric value is derived from the object tRPOperPSDefActMetricParam; the value of the object tRPOperPSDefaultActionMetricValue is ignored." ::= { tRPOperPSDefaultActionParamsEntry 32 } tRPOperPSDefActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAigpMetric indicates the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActnAigpMetricVal, tRPOperPSDefActAigpMetricSource and tRPOperPSDefActAigpMetricParam are ignored." ::= { tRPOperPSDefaultActionParamsEntry 33 } tRPOperPSDefActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActnAigpMetricVal indicates the value to be added or set for the route AIGP(Accumulated IGP) metric. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActnAigpMetricVal is ignored. The value of this object tRPOperPSDefActnAigpMetricVal is ignored when the object tRPOperPSDefActAigpMetricSource has a value different from actionValue(1)." ::= { tRPOperPSDefaultActionParamsEntry 34 } tRPOperPSDefActnSrcClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActnSrcClassIndex specifies the default operational source-class for this policy statement. A value of 0 means no source-class." DEFVAL { 0 } ::= { tRPOperPSDefaultActionParamsEntry 35 } tRPOperPSDefActnDstClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActnDstClassIndex specifies the default operational dest-class for this policy statement. A value of 0 means no dest-class." DEFVAL { 0 } ::= { tRPOperPSDefaultActionParamsEntry 36 } tRPOperPSDefActnOrigValidState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), valid (1), notFound (2), invalid (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActnOrigValidState indicates the default operational origin validation state for this policy statement. The value of this object tRPOperPSDefActnOrigValidState is ignored when the object tRPOperPSDefActOrigValStateSrc has a value different from actionValue(1)." DEFVAL { notApplicable } ::= { tRPOperPSDefaultActionParamsEntry 37 } tRPOperPSParamsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSParamsTable. tRPOperPSParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 13 } tRPOperPSParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entries." ::= { tRPOperValueObjects 14 } tRPOperPSParamsEntry OBJECT-TYPE SYNTAX TRPOperPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy statement entry. Entries are created when a policy statement parameters entry is created. Entries are deleted when a policy statement parameters entry is destroyed." INDEX { tRPOperPolicyStatementName, tRPOperPSNameEntryIndex } ::= { tRPOperPSParamsTable 1 } TRPOperPSParamsEntry ::= SEQUENCE { tRPOperPSNameEntryIndex TPolicyStatementEntryID, tRPOperPSParamsRowStatus RowStatus, tRPOperPSParamsDescription TItemDescription, tRPOperPSParamsAction TPolicyEntryAction, tRPOperPSParamsEntryLastChanged TimeStamp, tRPOperPSParamsCreationOrigin TmnxCreateOrigin } tRPOperPSNameEntryIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifier for this policy statement entry." ::= { tRPOperPSParamsEntry 1 } tRPOperPSParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPSParamsTable." ::= { tRPOperPSParamsEntry 2 } tRPOperPSParamsDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-only STATUS current DESCRIPTION "Description for this policy statement entry." ::= { tRPOperPSParamsEntry 3 } tRPOperPSParamsAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-only STATUS current DESCRIPTION "The action to take when a route matches this policy statement entry's to or from criteria." ::= { tRPOperPSParamsEntry 4 } tRPOperPSParamsEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSParamsEntry 5 } tRPOperPSParamsCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPSParamsCreationOrigin indicates the mechanism used to create this entry." ::= { tRPOperPSParamsEntry 6 } tRPOperPSAcceptActionParamsTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSAcceptActionParamsTable. tRPOperPSAcceptActionParamsTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 15 } tRPOperPSAcceptActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action parameters for a policy statement." ::= { tRPOperValueObjects 16 } tRPOperPSAcceptActionParamsEntry OBJECT-TYPE SYNTAX TRPOperPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information for a policy statement entry. Entries are created when tRPOperPSParamsAction is 'accept(1)', 'reject(2)', 'continue(3)' or 'nextPolicy(4)'. Entries are deleted when a policy statement is destroyed or tRPOperPSParamsAction is 'none(0)'." INDEX { tRPOperPolicyStatementName, tRPOperPSNameEntryIndex } ::= { tRPOperPSAcceptActionParamsTable 1 } TRPOperPSAcceptActionParamsEntry ::= SEQUENCE { tRPOperPSAcceptActionASPath TPolicyEntryEdit, tRPOperPSAcceptActionASPathName TASPathName, tRPOperPSAcceptActionASPathPrependAS TmnxBgpAutonomousSystem, tRPOperPSAcceptActionASPathPrependCount Integer32, tRPOperPSAcceptActionCommunity1 TPolicyEntryEdit, tRPOperPSAcceptActionCommunityName1 TCommunityName, tRPOperPSAcceptActionCommunity2 TPolicyEntryEdit, tRPOperPSAcceptActionCommunityName2 TCommunityName, tRPOperPSAcceptActionOrigin TPolicyEntryCriteriaOrigin, tRPOperPSAcceptActionLocalPreferenceSet TruthValue, tRPOperPSAcceptActionLocalPreference TmnxBgpLocalPreference, tRPOperPSAcceptActionMetric TPolicyEntryEdit, tRPOperPSAcceptActionMetricValue Unsigned32, tRPOperPSAcceptActionPreference TmnxBgpPreference, tRPOperPSAcceptActionDamping TDampingName, tRPOperPSAcceptActionNextHopSelf TruthValue, tRPOperPSAcceptActionNextHop IpAddress, tRPOperPSAcceptActionTag TPolicyActionTag, tRPOperPSAcceptActionOspfType TOspfRouteType, tRPOperPSAcceptActionParamsEntryLastChanged TimeStamp, tRPOperPSAcptActInetNextHopType InetAddressType, tRPOperPSAcptActInetNextHop InetAddress, tRPOperPSAcceptActionASPathPend InetAutonomousSystemNumber, tRPOperPSAcceptActionFC TNamedItemOrEmpty, tRPOperPSAcceptActionFCPriority TPriorityOrUndefined, tRPOperPSAcptActMcRedirSvcId TmnxServId, tRPOperPSAcptActMcRedirIfIndex InterfaceIndexOrZero, tRPOperPSAcptActnMetricSource TPolicyActionMetricSource, tRPOperPSAcptActionAigpMetric TPolicyEntryAigpMetricEdit, tRPOperPSAcptActnAigpMetricVal Unsigned32, tRPOperPSAcptActnSrcClassIndex ClassIndexOrNone, tRPOperPSAcptActnDstClassIndex ClassIndexOrNone, tRPOperPSAcptActnOrigValidState INTEGER } tRPOperPSAcceptActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The AS Path rewrite information for the route." ::= { tRPOperPSAcceptActionParamsEntry 1 } tRPOperPSAcceptActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-only STATUS current DESCRIPTION "AS Path Name to add, remove, or replace. Ignored when tRPOperPSAcceptActionASPath is none(1)" ::= { tRPOperPSAcceptActionParamsEntry 2 } tRPOperPSAcceptActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-only STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPOperPSAcceptActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPOperPSAcceptActionASPathPend." ::= { tRPOperPSAcceptActionParamsEntry 3 } tRPOperPSAcceptActionASPathPrependCount OBJECT-TYPE SYNTAX Integer32 (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times to prepend tRPOperPSAcceptActionASPathPend to the route. Set to zero to disable this feature. The value of this object tRPOperPSAcceptActionASPathPrependCount is ignored when the object tRPOperPSAcptActASPPendCountSrc has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 4 } tRPOperPSAcceptActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS obsolete DESCRIPTION "How to apply tRPOperPSAcceptActionCommunityName1 to the route. This object is obsoleted in release 11.0. It is replaced by tRPOperPSAccActionAddCommEntry, tRPOperPSAccActionRemCommEntry, and tRPOperPSAccActionRepCommEntry." ::= { tRPOperPSAcceptActionParamsEntry 5 } tRPOperPSAcceptActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Community to apply to the route. Ignored when tRPOperPSAcceptActionCommunity1 is set to none(1). This object is obsoleted in release 11.0. It is replaced by tRPOperPSAccActionAddCommEntry, tRPOperPSAccActionRemCommEntry, and tRPOperPSAccActionRepCommEntry." ::= { tRPOperPSAcceptActionParamsEntry 6 } tRPOperPSAcceptActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS obsolete DESCRIPTION "How to apply tRPOperPSAcceptActionCommunityName2 to the route. This object is obsoleted in release 11.0. It is replaced by tRPOperPSAccActionAddCommEntry, tRPOperPSAccActionRemCommEntry, and tRPOperPSAccActionRepCommEntry." ::= { tRPOperPSAcceptActionParamsEntry 7 } tRPOperPSAcceptActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Community to apply to the route. Ignored when tRPOperPSAcceptActionCommunity2 is set to none(1). This object is obsoleted in release 11.0. It is replaced by tRPOperPSAccActionAddCommEntry, tRPOperPSAccActionRemCommEntry, and tRPOperPSAccActionRepCommEntry." ::= { tRPOperPSAcceptActionParamsEntry 8 } tRPOperPSAcceptActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionOrigin indicates the origin of the route exported into BGP if it matches an entry. The value of this object tRPOperPSAcceptActionOrigin is ignored when the object tRPOperPSAcptActOriginSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 9 } tRPOperPSAcceptActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When set to true(1), use tRPOperPSAcceptActionLocalPreference for the local preference for the route. When the value of tRPOperPSAcptActLocalPrefSource has a value different from actionValue(1), the value of tRPOperPSAcceptActionLocalPreferenceSet and tRPOperPSAcceptActionLocalPreference are ignored." ::= { tRPOperPSAcceptActionParamsEntry 10 } tRPOperPSAcceptActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Local preference for the route. Ignored when tRPOperPSAcceptActionLocalPreferenceSet is false(2). The value of this object tRPOperPSAcceptActionLocalPreference is ignored when the object tRPOperPSAcptActLocalPrefSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 11 } tRPOperPSAcceptActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-only STATUS current DESCRIPTION "How to apply the metric value to the route. The metric value is obtained from tRPOperPSAcceptActionMetricValue or tRPOperPSAcptActMetricParam depending on the value of tRPOperPSAcptActnMetricSource ." ::= { tRPOperPSAcceptActionParamsEntry 12 } tRPOperPSAcceptActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Value to add, subtract, or set for the route metric. Ignored when tRPOperPSAcceptActionMetric is none(1). The value of this object tRPOperPSAcceptActionMetricValue is ignored when the object tRPOperPSAcptActnMetricSource has a value different from metricVal(2)." ::= { tRPOperPSAcceptActionParamsEntry 13 } tRPOperPSAcceptActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-only STATUS current DESCRIPTION "Preference to set in route. The value of this object tRPOperPSAcceptActionPreference is ignored when the object tRPOperPSAcptActPreferenceSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 15 } tRPOperPSAcceptActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-only STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." ::= { tRPOperPSAcceptActionParamsEntry 16 } tRPOperPSAcceptActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionNextHopSelf indicates the next-hop-self on the route. Next-hop-self cannot be 'true' when the other next-hop objects have a non-default value. When this object has a value of 'true' then tRPOperPSAcptActNextHopPeerAddr, tRPOperPSAcceptActionNextHop, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSAcptActNextHopSource and tRPOperPSAcptActNextHopParam objects are disabled." ::= { tRPOperPSAcceptActionParamsEntry 17 } tRPOperPSAcceptActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionNextHop indicates the next-hop IPv4 address in the route. The object is disabled if it holds the value 255.255.255.255. Next-hop cannot be a valid IP address when the next-hop-self or peer-address is 'true'. When this object has a valid IP address then tRPOperPSAcceptActionNextHopSelf and tRPOperPSAcptActNextHopPeerAddr are 'false'. This object is the same as tRPOperPSAcptActInetNextHop when a valid IPv4 address is set. Please use tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSAcptActNextHopSource and tRPOperPSAcptActNextHopParam for extended next-hop address support." ::= { tRPOperPSAcceptActionParamsEntry 18 } tRPOperPSAcceptActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionTag indicates the operational tag for the route. A value of 0 for tRPOperPSAcceptActionTag indicates that tagging is disabled. The value of this object tRPOperPSAcceptActionTag is ignored when the object tRPOperPSAcptActTagSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 19 } tRPOperPSAcceptActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF route type to set in route. The value of this object tRPOperPSAcceptActionOspfType is ignored when the object tRPOperPSAcptActOspfTypeSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 20 } tRPOperPSAcceptActionParamsEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSAcceptActionParamsEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSAcceptActionParamsEntry 21 } tRPOperPSAcptActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActInetNextHopType indicates the type of tRPOperPSAcptActInetNextHop address, as defined in the InetAddress MIB. The value of this object tRPOperPSAcptActInetNextHopType and tRPOperPSAcptActInetNextHop are ignored when the object tRPOperPSAcptActNextHopSource has a value different then actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 22 } tRPOperPSAcptActInetNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActInetNextHop indicates the next-hop IP address in the route. Next-hop is disabled if the value of tRPOperPSAcptActInetNextHopType is 'ipv6' and the value of tRPOperPSAcptActInetNextHop is ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPOperPSAcptActInetNextHopType object. Next-hop cannot be a valid IP address when the next-hop-self or peer-address is 'true'. When this object has a valid IP address then tRPOperPSAcceptActionNextHopSelf and tRPOperPSAcptActNextHopPeerAddr are 'false'. tRPOperPSAcptActInetNextHop object replaces tRPOperPSAcceptActionNextHop that supports only IPv4 address style next-hop. The value of this object tRPOperPSAcptActInetNextHop is ignored when the object tRPOperPSAcptActNextHopSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 23 } tRPOperPSAcceptActionASPathPend OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionASPathPend indicates the AS Number to prepend to the AS-Path attribute of the route. The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPOperPSAcceptActionASPathPrependCount is zero and tRPOperPSAcptActASPPendCountSrc is set to actionValue(1). The value of this object tRPOperPSAcceptActionASPathPend is ignored when the object tRPOperPSAcptActASPathPendSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 24 } tRPOperPSAcceptActionFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionFC indicates the forwarding class associated with the routes matched by this route policy entry." ::= { tRPOperPSAcceptActionParamsEntry 25 } tRPOperPSAcceptActionFCPriority OBJECT-TYPE SYNTAX TPriorityOrUndefined MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcceptActionFCPriority indicates the priority to be assigned to the routes matched by this route policy entry." ::= { tRPOperPSAcceptActionParamsEntry 26 } tRPOperPSAcptActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActMcRedirSvcId indicates the service ID of the service where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPOperPSAcceptActionParamsEntry 30 } tRPOperPSAcptActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActMcRedirIfIndex indicates the interface index of the interface where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPOperPSAcceptActionParamsEntry 31 } tRPOperPSAcptActnMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnMetricSource indicates the source of the accept action metric. The value 'igpCost(1)' means that the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route and the value of the object tRPOperPSAcceptActionMetricValue and the object tRPOperPSAcptActMetricParam are ignored. The value 'metricVal(2)' means the metric value is the value of tRPOperPSAcceptActionMetricValue. The value of the object tRPOperPSAcptActMetricParam is ignored. The value 'metricParam(3) means the metric value is derived from the object tRPOperPSAcptActMetricParam; the value of the object tRPOperPSAcceptActionMetricValue is ignored." DEFVAL { metricVal } ::= { tRPOperPSAcceptActionParamsEntry 32 } tRPOperPSAcptActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActionAigpMetric indicates the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActnAigpMetricVal, tRPOperPSAcptActAigpMetricSource and tRPOperPSAcptActAigpMetricParam are ignored." ::= { tRPOperPSAcceptActionParamsEntry 33 } tRPOperPSAcptActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnAigpMetricVal indicates the value to be added or set for the route AIGP(Accumulated IGP) metric. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActnAigpMetricVal is ignored. The value of this object tRPOperPSAcptActnAigpMetricVal is ignored when the object tRPOperPSAcptActAigpMetricSource has a value different from actionValue(1)." ::= { tRPOperPSAcceptActionParamsEntry 34 } tRPOperPSAcptActnSrcClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnSrcClassIndex specifies the operational source-class for this policy statement. A value of 0 means no source-class." DEFVAL { 0 } ::= { tRPOperPSAcceptActionParamsEntry 35 } tRPOperPSAcptActnDstClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnDstClassIndex specifies the operational dest-class for this policy statement. A value of 0 means no dest-class." DEFVAL { 0 } ::= { tRPOperPSAcceptActionParamsEntry 36 } tRPOperPSAcptActnOrigValidState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), valid (1), notFound (2), invalid (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActnOrigValidState indicates the operational value for origin validation state for this policy statement. The value of this object tRPOperPSAcptActnOrigValidState is ignored when the object tRPOperPSAcptActOrigValStateSrc has a value different from actionValue(1)." DEFVAL { notApplicable } ::= { tRPOperPSAcceptActionParamsEntry 37 } tRPOperPSToCriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSToCriteriaTable. tRPOperPSToCriteriaTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 17 } tRPOperPSToCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entry 'to' criteria" ::= { tRPOperValueObjects 18 } tRPOperPSToCriteriaEntry OBJECT-TYPE SYNTAX TRPOperPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a policy statement entry's -to- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPOperPolicyStatementName, tRPOperPSToCriteriaIndex } ::= { tRPOperPSToCriteriaTable 1 } TRPOperPSToCriteriaEntry ::= SEQUENCE { tRPOperPSToCriteriaIndex TPolicyStatementEntryID, tRPOperPSToCriteriaRowStatus RowStatus, tRPOperPSToCriteriaProtocol TRoutePolicyProtocol, tRPOperPSToCriteriaNeighborIpAddr IpAddress, tRPOperPSToCriteriaNeighborPrefixList TPrefixListName, tRPOperPSToCriteriaEntryLastChanged TimeStamp, tRPOperPSToCriteriaIsisLevel TIsisLevel, tRPOperPSToCriteriaPrefixList1 TPrefixListName, tRPOperPSToCriteriaPrefixList2 TPrefixListName, tRPOperPSToCriteriaPrefixList3 TPrefixListName, tRPOperPSToCriteriaPrefixList4 TPrefixListName, tRPOperPSToCriteriaPrefixList5 TPrefixListName, tRPOperPSToCritNbrInetAddrType InetAddressType, tRPOperPSToCritNbrInetAddr InetAddress, tRPOperPSToCriteriaInstanceId Unsigned32, tRPOperPSToCritProtocolBits TRoutePolicyProtocolBits } tRPOperPSToCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPOperPSToCriteriaEntry 1 } tRPOperPSToCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPSToCriteriaTable." ::= { tRPOperPSToCriteriaEntry 2 } tRPOperPSToCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The protocol name to match on. Set to none(1) to disable. This object is deprecated, please use the object tRPOperPSToCritProtocolBits instead." ::= { tRPOperPSToCriteriaEntry 3 } tRPOperPSToCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 255.255.255.255 to disable." ::= { tRPOperPSToCriteriaEntry 4 } tRPOperPSToCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." ::= { tRPOperPSToCriteriaEntry 5 } tRPOperPSToCriteriaEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSToCriteriaEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSToCriteriaEntry 6 } tRPOperPSToCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The value for tRPOperPSToCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." ::= { tRPOperPSToCriteriaEntry 7 } tRPOperPSToCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList1 indicates the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPOperPSToCritPrefixList1, please use tRPOperPSToCritPfxListTable to match on more prefix lists." ::= { tRPOperPSToCriteriaEntry 8 } tRPOperPSToCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList2 indicates the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPOperPSToCritPrefixList2, please use tRPOperPSToCritPfxListTable to match on more prefix lists." ::= { tRPOperPSToCriteriaEntry 9 } tRPOperPSToCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList3 indicates the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPOperPSToCritPrefixList3, please use tRPOperPSToCritPfxListTable to match on more prefix lists." ::= { tRPOperPSToCriteriaEntry 10 } tRPOperPSToCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList4 indicates the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPOperPSToCritPrefixList4, please use tRPOperPSToCritPfxListTable to match on more prefix lists." ::= { tRPOperPSToCriteriaEntry 11 } tRPOperPSToCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaPrefixList5 indicates the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPOperPSToCritPrefixList5, please use tRPOperPSToCritPfxListTable to match on more prefix lists." ::= { tRPOperPSToCriteriaEntry 12 } tRPOperPSToCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritNbrInetAddrType indicates the type of tRPOperPSToCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPOperPSToCriteriaEntry 13 } tRPOperPSToCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritNbrInetAddr indicates the IP address of neighbor to match on. The object tRPOperPSToCritNbrInetAddr is disabled if it holds the value ff:ff:ff:ff. The type of this address is determined by the value of tRPOperPSToCritNbrInetAddrType object. tRPOperPSToCritNbrInetAddr object replaces tRPOperPSToCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPOperPSToCriteriaEntry 14 } tRPOperPSToCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31 | 64..95 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCriteriaInstanceId indicates the instance identifier of the ISIS or OSPF(v3) protocol running in the router instance. The value of tRPOperPSToCriteriaInstanceId will be 0 in case tRPOperPSToCritProtocolBits has bits set different from isis(5), ospf(6) and ospf3(12). The range of instance identifiers between 64 and 95 is only supported in case tRPOperPSToCritProtocolBits has the ospf3(12) bit set. If the value of tRPOperPSToCriteriaInstanceId is 4294967295, all instances of the ISIS or OSPF(v3) protocol are leaked into BGP." ::= { tRPOperPSToCriteriaEntry 15 } tRPOperPSToCritProtocolBits OBJECT-TYPE SYNTAX TRoutePolicyProtocolBits MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritProtocolBits indicates the protocol name to match on. When the 'none' bit is set, the protocol match criteria is disabled." ::= { tRPOperPSToCriteriaEntry 16 } tRPOperPSFromCriteriaTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to tRPOperPSFromCriteriaTable. tRPOperPSFromCriteriaTableLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 19 } tRPOperPSFromCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of from filter criteria for each policy statement entry." ::= { tRPOperValueObjects 20 } tRPOperPSFromCriteriaEntry OBJECT-TYPE SYNTAX TRPOperPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry -from- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPOperPolicyStatementName, tRPOperPSFromCriteriaIndex } ::= { tRPOperPSFromCriteriaTable 1 } TRPOperPSFromCriteriaEntry ::= SEQUENCE { tRPOperPSFromCriteriaIndex TPolicyStatementEntryID, tRPOperPSFromCriteriaRowStatus RowStatus, tRPOperPSFromCriteriaProtocol TRoutePolicyProtocol, tRPOperPSFromCriteriaNeighborIpAddr IpAddress, tRPOperPSFromCriteriaNeighborPrefixList TPrefixListName, tRPOperPSFromCriteriaPrefixList1 TPrefixListName, tRPOperPSFromCriteriaPrefixList2 TPrefixListName, tRPOperPSFromCriteriaPrefixList3 TPrefixListName, tRPOperPSFromCriteriaPrefixList4 TPrefixListName, tRPOperPSFromCriteriaPrefixList5 TPrefixListName, tRPOperPSFromCriteriaASPath TASPathName, tRPOperPSFromCriteriaCommunity TLCommunityName, tRPOperPSFromCriteriaOrigin TPolicyEntryCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType TOspfRouteType, tRPOperPSFromCriteriaEntryLastChanged TimeStamp, tRPOperPSFromCriteriaArea IpAddress, tRPOperPSFromCriteriaAreaConfigured TruthValue, tRPOperPSFromCriteriaIsisLevel TIsisLevel, tRPOperPSFromCriteriaIsisExternal TruthValue, tRPOperPSFromCriteriaIgmpHostPrefixList TPrefixListName, tRPOperPSFromCriteriaGrpAddrPrefixList TPrefixListName, tRPOperPSFromCriteriaSrcAddr IpAddress, tRPOperPSFromCriteriaInterface TNamedItemOrEmpty, tRPOperPSFromCriteriaTag TPolicyActionTag, tRPOperPSFromCritNbrInetAddrType InetAddressType, tRPOperPSFromCritNbrInetAddr InetAddress, tRPOperPSFromCritSrcInetAddrType InetAddressType, tRPOperPSFromCritSrcInetAddr InetAddress, tRPOperPSFromCriteriaFamily TmnxBGPFamilyType, tRPOperPSFromCriteriaInstanceId Unsigned32, tRPOperPSFromCriteriaMatchTag TmnxEnabledDisabled, tRPOperPSFromCriteriaState TPolicyEntryCriteriaState, tRPOperPSFromCritASPathGroup TASPathGroupName, tRPOperPSFromCriteriaPolicy TXLPolicyNameOrExpOrEmpty, tRPOperPSFromCritCreationOrigin TmnxCreateOrigin, tRPOperPSFromCritProtocolBits TRoutePolicyProtocolBits } tRPOperPSFromCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPOperPSFromCriteriaEntry 1 } tRPOperPSFromCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPSFromCriteriaTable." ::= { tRPOperPSFromCriteriaEntry 2 } tRPOperPSFromCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The protocol name to match on. Set to none(1) to disable. This object is deprecated, please use the object tRPOperPSFromCritProtocolBits instead." ::= { tRPOperPSFromCriteriaEntry 3 } tRPOperPSFromCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 255.255.255.255 to disable." ::= { tRPOperPSFromCriteriaEntry 4 } tRPOperPSFromCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 5 } tRPOperPSFromCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the first prefix list to match on. Set to empty string to disable. This object is the same as tRPOperPSFromCritPrefixList1, please use tRPOperPSFromCritPfxListTable to match on more prefix lists." ::= { tRPOperPSFromCriteriaEntry 6 } tRPOperPSFromCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the second prefix list to match on. Set to empty string to disable. This object is the same as tRPOperPSFromCritPrefixList2, please use tRPOperPSFromCritPfxListTable to match on more prefix lists." ::= { tRPOperPSFromCriteriaEntry 7 } tRPOperPSFromCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the third prefix list to match on. Set to empty string to disable. This object is the same as tRPOperPSFromCritPrefixList3, please use tRPOperPSFromCritPfxListTable to match on more prefix lists." ::= { tRPOperPSFromCriteriaEntry 8 } tRPOperPSFromCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the fourth prefix list to match on. Set to empty string to disable. This object is the same as tRPOperPSFromCritPrefixList4, please use tRPOperPSFromCritPfxListTable to match on more prefix lists." ::= { tRPOperPSFromCriteriaEntry 9 } tRPOperPSFromCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the fifth prefix list to match on. Set to empty string to disable. This object is the same as tRPOperPSFromCritPrefixList5, please use tRPOperPSFromCritPfxListTable to match on more prefix lists." ::= { tRPOperPSFromCriteriaEntry 10 } tRPOperPSFromCriteriaASPath OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the AS Path to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 11 } tRPOperPSFromCriteriaCommunity OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the community to match on. Set to empty string to disable." ::= { tRPOperPSFromCriteriaEntry 12 } tRPOperPSFromCriteriaOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaOrigin indicates the route match criterion for an entry." ::= { tRPOperPSFromCriteriaEntry 13 } tRPOperPSFromCriteriaOspfRouteType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF route type to match on. Set to zero to disable." ::= { tRPOperPSFromCriteriaEntry 14 } tRPOperPSFromCriteriaEntryLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of last change to this entry. tRPOperPSFromCriteriaEntryLastChanged is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperPSFromCriteriaEntry 15 } tRPOperPSFromCriteriaArea OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Used when redistributing OSPF routes into other protocols. Specifies the OSPF area that must be matched in filtered routes." ::= { tRPOperPSFromCriteriaEntry 16 } tRPOperPSFromCriteriaAreaConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies if the tRPOperPSFromCriteriaArea has been configured" ::= { tRPOperPSFromCriteriaEntry 17 } tRPOperPSFromCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The value for tRPOperPSFromCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." ::= { tRPOperPSFromCriteriaEntry 18 } tRPOperPSFromCriteriaIsisExternal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When tRPOperPSFromCriteriaIsisExternal is 'true', match only External IS-IS routes. If 'false', match all routes. External IS-IS routes are those routes that have been learned from outside the IS-IS domain." ::= { tRPOperPSFromCriteriaEntry 19 } tRPOperPSFromCriteriaIgmpHostPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaIgmpHostPrefixList contains the name of the prefix list that is used to match the IGMP/MLD host IP address. The value of the object will be an empty string if it not set." ::= { tRPOperPSFromCriteriaEntry 20 } tRPOperPSFromCriteriaGrpAddrPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaGrpAddrPrefixList contains the name of the prefix list that is used to match the multicast group address. The value of the object will be an empty string if it not set." ::= { tRPOperPSFromCriteriaEntry 21 } tRPOperPSFromCriteriaSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaSrcAddr contains the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP/MLD. The value of this object will be 0.0.0.0 if it is not set." ::= { tRPOperPSFromCriteriaEntry 22 } tRPOperPSFromCriteriaInterface OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "tRPOperPSFromCriteriaInterface contains the name of the interface to match on. PIM Bootstrap route policy will use this object to accept/reject bootstrap messages coming on the interface specified by this object. The value of the object will be an empty string if it not set." ::= { tRPOperPSFromCriteriaEntry 23 } tRPOperPSFromCriteriaTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaTag indicates the operational tag to match on. It will only be valid when tRPOperPSFromCriteriaMatchTag is enabled which indicates that route matching based on tags is enabled. A value of 0 for tRPOperPSFromCriteriaTag when tRPOperPSFromCriteriaMatchTag is enabled indicates untagged routes are matched." ::= { tRPOperPSFromCriteriaEntry 24 } tRPOperPSFromCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNbrInetAddrType indicates the type of tRPOperPSFromCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPOperPSFromCriteriaEntry 25 } tRPOperPSFromCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNbrInetAddr indicates the IP address of neighbor to match on. The object tRPOperPSFromCritNbrInetAddr is disabled if it holds the value ff:ff:ff:ff. The type of this address is determined by the value of the tRPOperPSFromCritNbrInetAddrType object. tRPOperPSFromCritNbrInetAddr object replaces tRPOperPSFromCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPOperPSFromCriteriaEntry 26 } tRPOperPSFromCritSrcInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritSrcInetAddrType indicates the type of tRPOperPSFromCritSrcInetAddr address, as defined in the InetAddress MIB." ::= { tRPOperPSFromCriteriaEntry 27 } tRPOperPSFromCritSrcInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritSrcInetAddr indicates the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP/MLD and is disabled if it holds the value ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of the tRPOperPSFromCritSrcInetAddrType object. tRPOperPSFromCritSrcInetAddr object replaces tRPOperPSFromCriteriaSrcAddr that supports only IPv4 address style source." ::= { tRPOperPSFromCriteriaEntry 28 } tRPOperPSFromCriteriaFamily OBJECT-TYPE SYNTAX TmnxBGPFamilyType MAX-ACCESS read-only STATUS current DESCRIPTION "The bits set in the value of tRPAdminPSFromCriteriaFamily indicate the address families that this condition would match against." ::= { tRPOperPSFromCriteriaEntry 29 } tRPOperPSFromCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31 | 64..95 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaInstanceId indicates the instance identifier of the ISIS or OSPF(v3) protocol running in the router instance. The value of tRPOperPSFromCriteriaInstanceId will be 0 in case tRPOperPSFromCritProtocolBits has bits set different from isis(5), ospf(6) and ospf3(12). The range of instance identifiers between 64 and 95 is only supported in case tRPOperPSFromCritProtocolBits has the ospf3(12) bit set. If the value of tRPOperPSFromCriteriaInstanceId is 4294967295, all instances of the ISIS or OSPF(v3) protocol are leaked into BGP." ::= { tRPOperPSFromCriteriaEntry 30 } tRPOperPSFromCriteriaMatchTag OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaMatchTag indicates if tag matching is enabled or disabled." ::= { tRPOperPSFromCriteriaEntry 31 } tRPOperPSFromCriteriaState OBJECT-TYPE SYNTAX TPolicyEntryCriteriaState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaState indicates the route state match criterion for this entry." ::= { tRPOperPSFromCriteriaEntry 32 } tRPOperPSFromCritASPathGroup OBJECT-TYPE SYNTAX TASPathGroupName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritASPathGroup indicates the AS-Path Group match criterion for this entry." ::= { tRPOperPSFromCriteriaEntry 33 } tRPOperPSFromCriteriaPolicy OBJECT-TYPE SYNTAX TXLPolicyNameOrExpOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCriteriaPolicy indicates the policy match criterion for this entry." ::= { tRPOperPSFromCriteriaEntry 34 } tRPOperPSFromCritCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPSFromCritCreationOrigin indicates the mechanism used to create this entry." ::= { tRPOperPSFromCriteriaEntry 35 } tRPOperPSFromCritProtocolBits OBJECT-TYPE SYNTAX TRoutePolicyProtocolBits MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritProtocolBits indicates the protocol name to match on. When the 'none' bit is set, the protocol match criteria is disabled." ::= { tRPOperPSFromCriteriaEntry 36 } tRPOperInetPrefixListTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tRPOperInetPrefixListTblLastChg indicates the timestamp of last change to tRPOperInetPrefixListTable. tRPOperInetPrefixListTblLastChg is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperValueObjects 21 } tRPOperInetPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IPv4 and IPv6 operational prefix lists." ::= { tRPOperValueObjects 22 } tRPOperInetPrefixListEntry OBJECT-TYPE SYNTAX TRPOperInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperInetPrefixListTable represents information about a particular prefix list. Entries are created and deleted by the user via tRPAdminInetPrefixListTable." INDEX { tRPOperInetPrefixListName, tRPOperInetPrefixListPrefixType, tRPOperInetPrefixListPrefix, tRPOperInetPrefixListPrefixLen, tRPOperInetPrefixListType } ::= { tRPOperInetPrefixListTable 1 } TRPOperInetPrefixListEntry ::= SEQUENCE { tRPOperInetPrefixListName TPrefixListName, tRPOperInetPrefixListPrefixType InetAddressType, tRPOperInetPrefixListPrefix InetAddress, tRPOperInetPrefixListPrefixLen InetAddressPrefixLength, tRPOperInetPrefixListType INTEGER, tRPOperInetPrefixListRowStatus RowStatus, tRPOperInetPrefixListThroughLen InetAddressPrefixLength, tRPOperInetPrefixListLastChg TimeStamp, tRPOperInetPrefixListBeginLen InetAddressPrefixLength, tRPOperInetPrefixListCrOrigin TmnxCreateOrigin } tRPOperInetPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListName indicates the name of the prefix list entry." ::= { tRPOperInetPrefixListEntry 1 } tRPOperInetPrefixListPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListPrefixType indicates the address type of tRPOperInetPrefixListPrefix." ::= { tRPOperInetPrefixListEntry 2 } tRPOperInetPrefixListPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListPrefix indicates the IP prefix of the prefix list entry." ::= { tRPOperInetPrefixListEntry 3 } tRPOperInetPrefixListPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListPrefixLen indicates the IP prefix length of the prefix list entry." ::= { tRPOperInetPrefixListEntry 4 } tRPOperInetPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact (1), longer (2), through (3), range (4), to (5), addressMask (6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperInetPrefixListType indicates the type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPOperInetPrefixListBeginLen and less than or equal to the length defined by tRPOperInetPrefixListThroughLen in order for an entry to be considered a match. to (5) - a route's prefix/length must match the condition from a start prefix/length to an end prefix/length. The end prefix/length is indicated in the corresponding entry in the tRPOperPfxListToTable. addressMask (6) - a route's prefix/length must match the prefix length of the prefix-list entry and the bitwise logical AND of the route address and the mask must match the bitwise logical AND from the prefix-list address and the mask. The address mask must be specified in a corresponding entry in the tRPOperPfxListAddressMaskTable." ::= { tRPOperInetPrefixListEntry 5 } tRPOperInetPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminInetPrefixListTable." ::= { tRPOperInetPrefixListEntry 6 } tRPOperInetPrefixListThroughLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperInetPrefixListThroughLen indicates the prefix length to use when tRPOperInetPrefixListType set to through(3). The value must be larger than tRPOperInetPrefixListPrefixLen." ::= { tRPOperInetPrefixListEntry 7 } tRPOperInetPrefixListLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tRPOperInetPrefixListLastChg indicates the timestamp of last change to this entry. tRPOperInetPrefixListLastChg is obsoleted in release 5.0. TIMETRA-SYSTEM-MIB::tmnxConfigModify notification is used instead." ::= { tRPOperInetPrefixListEntry 8 } tRPOperInetPrefixListBeginLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperInetPrefixListBeginLen indicates the prefix length to use as the lower limit for the prefix range when tRPOperInetPrefixListType set to range(4). The value must be larger than tRPOperInetPrefixListPrefixLen and less than tRPOperInetPrefixListThroughLen." ::= { tRPOperInetPrefixListEntry 9 } tRPOperInetPrefixListCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperInetPrefixListCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperInetPrefixListEntry 10 } tRPOperCommunityExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPOperValueObjects 25 } tRPOperCommunityExprEntry OBJECT-TYPE SYNTAX TRPOperCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community member. Entries are created by user, via tRPAdminCommunityExprTable. Entries are deleted by user, via tRPAdminCommunityExprTable." INDEX { tRPOperCommunityExprName } ::= { tRPOperCommunityExprTable 1 } TRPOperCommunityExprEntry ::= SEQUENCE { tRPOperCommunityExprName TLCommunityName, tRPOperCommunityExprRowStatus RowStatus, tRPOperCommunityExprString1 TCommunityMemberExpression, tRPOperCommunityExprString2 TCommunityMemberExpression, tRPOperCommunityExprString3 TCommunityMemberExpression, tRPOperCommunityExprString4 TCommunityMemberExpression, tRPOperCommunityExprExactMatch TruthValue } tRPOperCommunityExprName OBJECT-TYPE SYNTAX TLCommunityName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of object tRPOperCommunityExprName indicates the name of the community used as an index for this table." ::= { tRPOperCommunityExprEntry 1 } tRPOperCommunityExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminCommunityExprTable." ::= { tRPOperCommunityExprEntry 2 } tRPOperCommunityExprString1 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString1 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression." ::= { tRPOperCommunityExprEntry 3 } tRPOperCommunityExprString2 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString2 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression." ::= { tRPOperCommunityExprEntry 4 } tRPOperCommunityExprString3 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString3 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression." ::= { tRPOperCommunityExprEntry 5 } tRPOperCommunityExprString4 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprString4 indicates an expression that matches AS Numbers or Community ID's. The objects tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3 and tRPOperCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression." ::= { tRPOperCommunityExprEntry 6 } tRPOperCommunityExprExactMatch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperCommunityExprExactMatch indicates whether the expression in this table entry is only evaluated on an exact match. If the value of this object is 'true', then the community expression only matches a given route if all communities attached to the route are strictly required to match the expression and no redundant communities are present." ::= { tRPOperCommunityExprEntry 7 } tRPOperASPathGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of AS-Path Groups." ::= { tRPOperValueObjects 26 } tRPOperASPathGroupEntry OBJECT-TYPE SYNTAX TRPOperASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperASPathGroupTable represents information about a particular AS-Path Group. Entries are created by user via tRPAdminASPathGroupTable. Entries are deleted by user via tRPAdminASPathGroupTable." INDEX { tRPOperASPathGroupName, tRPOperASPathGroupEntryIndex } ::= { tRPOperASPathGroupTable 1 } TRPOperASPathGroupEntry ::= SEQUENCE { tRPOperASPathGroupName TASPathGroupName, tRPOperASPathGroupEntryIndex Unsigned32, tRPOperASPathGroupRowStatus RowStatus, tRPOperASPathGroupASPathName TASPathName, tRPOperASPathGroupASPathRegEx TRoutePolicyRegex, tRPOperASPathGroupCrOrigin TmnxCreateOrigin } tRPOperASPathGroupName OBJECT-TYPE SYNTAX TASPathGroupName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperASPathGroupName indicates the name of the AS-Path Group." ::= { tRPOperASPathGroupEntry 1 } tRPOperASPathGroupEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperASPathGroupEntryIndex indicates the index of the entry in the AS-Path Group." ::= { tRPOperASPathGroupEntry 2 } tRPOperASPathGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperASPathGroupRowStatus indicates the RowStatus for this entry. To create or destroy entries in this table, use the tRPAdminASPathGroupTable." ::= { tRPOperASPathGroupEntry 3 } tRPOperASPathGroupASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE (1..32)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tRPOperASPathGroupASPathName indicates the name of the AS-Path from the tRPOperASPathTable. This object is made obsolete in release 14.0." ::= { tRPOperASPathGroupEntry 4 } tRPOperASPathGroupASPathRegEx OBJECT-TYPE SYNTAX TRoutePolicyRegex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperASPathGroupASPathRegEx indicates the regular expression for this AS-Path Group entry." ::= { tRPOperASPathGroupEntry 5 } tRPOperASPathGroupCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperASPathGroupCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperASPathGroupEntry 6 } tRPOperPSFromCommExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSFromCommExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of from filter criteria to match on Community ID's for each policy statement entry." ::= { tRPOperValueObjects 27 } tRPOperPSFromCommExprEntry OBJECT-TYPE SYNTAX TRPOperPSFromCommExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community name expression to use as match criterion for this policy statement entry. Entries are created and deleted by creating and deleting entries in tRPAdminPSFromCommExprTable." INDEX { tRPOperPolicyStatementName, tRPOperPSFromCriteriaIndex } ::= { tRPOperPSFromCommExprTable 1 } TRPOperPSFromCommExprEntry ::= SEQUENCE { tRPOperPSFromCommExprRowStatus RowStatus, tRPOperPSFromCommExprString1 TCommunityNameExpression, tRPOperPSFromCommExprString2 TCommunityNameExpression, tRPOperPSFromCommExprString3 TCommunityNameExpression, tRPOperPSFromCommExprString4 TCommunityNameExpression } tRPOperPSFromCommExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSFromCommExprRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPSFromCommExprTable." ::= { tRPOperPSFromCommExprEntry 1 } tRPOperPSFromCommExprString1 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSFromCommExprString1 indicates an expression that matches Community ID's. The objects tRPOperPSFromCommExprString1, tRPOperPSFromCommExprString2, tRPOperPSFromCommExprString3 and tRPOperPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression." ::= { tRPOperPSFromCommExprEntry 2 } tRPOperPSFromCommExprString2 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSFromCommExprString2 indicates an expression that matches Community ID's. The objects tRPOperPSFromCommExprString1, tRPOperPSFromCommExprString2, tRPOperPSFromCommExprString3 and tRPOperPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression." ::= { tRPOperPSFromCommExprEntry 3 } tRPOperPSFromCommExprString3 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSFromCommExprString3 indicates an expression that matches Community ID's. The objects tRPOperPSFromCommExprString1, tRPOperPSFromCommExprString2, tRPOperPSFromCommExprString3 and tRPOperPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression." ::= { tRPOperPSFromCommExprEntry 4 } tRPOperPSFromCommExprString4 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSFromCommExprString4 indicates an expression that matches Community ID's. The objects tRPOperPSFromCommExprString1, tRPOperPSFromCommExprString2, tRPOperPSFromCommExprString3 and tRPOperPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression." ::= { tRPOperPSFromCommExprEntry 5 } tRPOperPSDefActionAddCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSDefActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default community names for a policy statement to add to routes." ::= { tRPOperValueObjects 28 } tRPOperPSDefActionAddCommEntry OBJECT-TYPE SYNTAX TRPOperPSDefActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These communities are applied when the default action for the policy statement (tRPOperPolicyStatementDefaultAction) is 'accept(1)'. These communities are ignored when the default action for the policy statement (tRPOperPolicyStatementDefaultAction) is 'reject(2)'. Entries are created when a policy statement is created. Entries are deleted when a policy statement is destroyed." INDEX { tRPOperPolicyStatementName } ::= { tRPOperPSDefActionAddCommTable 1 } TRPOperPSDefActionAddCommEntry ::= SEQUENCE { tRPOperPSDefActionAddComm1 TLCommunityName, tRPOperPSDefActionAddComm2 TLCommunityName, tRPOperPSDefActionAddComm3 TLCommunityName, tRPOperPSDefActionAddComm4 TLCommunityName, tRPOperPSDefActionAddComm5 TLCommunityName, tRPOperPSDefActionAddComm6 TLCommunityName, tRPOperPSDefActionAddComm7 TLCommunityName, tRPOperPSDefActionAddComm8 TLCommunityName, tRPOperPSDefActionAddComm9 TLCommunityName, tRPOperPSDefActionAddComm10 TLCommunityName, tRPOperPSDefActionAddComm11 TLCommunityName, tRPOperPSDefActionAddComm12 TLCommunityName, tRPOperPSDefActionAddComm13 TLCommunityName, tRPOperPSDefActionAddComm14 TLCommunityName, tRPOperPSDefActionAddComm15 TLCommunityName, tRPOperPSDefActionAddComm16 TLCommunityName, tRPOperPSDefActionAddComm17 TLCommunityName, tRPOperPSDefActionAddComm18 TLCommunityName, tRPOperPSDefActionAddComm19 TLCommunityName, tRPOperPSDefActionAddComm20 TLCommunityName, tRPOperPSDefActionAddComm21 TLCommunityName, tRPOperPSDefActionAddComm22 TLCommunityName, tRPOperPSDefActionAddComm23 TLCommunityName, tRPOperPSDefActionAddComm24 TLCommunityName, tRPOperPSDefActionAddComm25 TLCommunityName, tRPOperPSDefActionAddComm26 TLCommunityName, tRPOperPSDefActionAddComm27 TLCommunityName, tRPOperPSDefActionAddComm28 TLCommunityName } tRPOperPSDefActionAddComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm1 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 1 } tRPOperPSDefActionAddComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm2 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 2 } tRPOperPSDefActionAddComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm3 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 3 } tRPOperPSDefActionAddComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm4 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 4 } tRPOperPSDefActionAddComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm5 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 5 } tRPOperPSDefActionAddComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm6 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 6 } tRPOperPSDefActionAddComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm7 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 7 } tRPOperPSDefActionAddComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm8 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 8 } tRPOperPSDefActionAddComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm9 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 9 } tRPOperPSDefActionAddComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm10 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 10 } tRPOperPSDefActionAddComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm11 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 11 } tRPOperPSDefActionAddComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm12 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 12 } tRPOperPSDefActionAddComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm13 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 13 } tRPOperPSDefActionAddComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm14 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 14 } tRPOperPSDefActionAddComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm15 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 15 } tRPOperPSDefActionAddComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm16 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 16 } tRPOperPSDefActionAddComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm17 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 17 } tRPOperPSDefActionAddComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm18 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 18 } tRPOperPSDefActionAddComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm19 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 19 } tRPOperPSDefActionAddComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm20 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 20 } tRPOperPSDefActionAddComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm21 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 21 } tRPOperPSDefActionAddComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm22 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 22 } tRPOperPSDefActionAddComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm23 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 23 } tRPOperPSDefActionAddComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm24 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 24 } tRPOperPSDefActionAddComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm25 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 25 } tRPOperPSDefActionAddComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm26 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 26 } tRPOperPSDefActionAddComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm27 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 27 } tRPOperPSDefActionAddComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionAddComm28 indicates a community name to add to any existing community for the route." ::= { tRPOperPSDefActionAddCommEntry 28 } tRPOperPSDefActionRemCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSDefActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default community names for a policy statement to remove from routes." ::= { tRPOperValueObjects 29 } tRPOperPSDefActionRemCommEntry OBJECT-TYPE SYNTAX TRPOperPSDefActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These communities are applied when the default action for the policy statement (tRPOperPolicyStatementDefaultAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPOperPSDefaultActionParamsTable is created or deleted." AUGMENTS { tRPOperPSDefaultActionParamsEntry } ::= { tRPOperPSDefActionRemCommTable 1 } TRPOperPSDefActionRemCommEntry ::= SEQUENCE { tRPOperPSDefActionRemoveComm1 TLCommunityName, tRPOperPSDefActionRemoveComm2 TLCommunityName, tRPOperPSDefActionRemoveComm3 TLCommunityName, tRPOperPSDefActionRemoveComm4 TLCommunityName, tRPOperPSDefActionRemoveComm5 TLCommunityName, tRPOperPSDefActionRemoveComm6 TLCommunityName, tRPOperPSDefActionRemoveComm7 TLCommunityName, tRPOperPSDefActionRemoveComm8 TLCommunityName, tRPOperPSDefActionRemoveComm9 TLCommunityName, tRPOperPSDefActionRemoveComm10 TLCommunityName, tRPOperPSDefActionRemoveComm11 TLCommunityName, tRPOperPSDefActionRemoveComm12 TLCommunityName, tRPOperPSDefActionRemoveComm13 TLCommunityName, tRPOperPSDefActionRemoveComm14 TLCommunityName, tRPOperPSDefActionRemoveComm15 TLCommunityName, tRPOperPSDefActionRemoveComm16 TLCommunityName, tRPOperPSDefActionRemoveComm17 TLCommunityName, tRPOperPSDefActionRemoveComm18 TLCommunityName, tRPOperPSDefActionRemoveComm19 TLCommunityName, tRPOperPSDefActionRemoveComm20 TLCommunityName, tRPOperPSDefActionRemoveComm21 TLCommunityName, tRPOperPSDefActionRemoveComm22 TLCommunityName, tRPOperPSDefActionRemoveComm23 TLCommunityName, tRPOperPSDefActionRemoveComm24 TLCommunityName, tRPOperPSDefActionRemoveComm25 TLCommunityName, tRPOperPSDefActionRemoveComm26 TLCommunityName, tRPOperPSDefActionRemoveComm27 TLCommunityName, tRPOperPSDefActionRemoveComm28 TLCommunityName } tRPOperPSDefActionRemoveComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm1 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 1 } tRPOperPSDefActionRemoveComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm2 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 2 } tRPOperPSDefActionRemoveComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm3 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 3 } tRPOperPSDefActionRemoveComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm4 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 4 } tRPOperPSDefActionRemoveComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm5 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 5 } tRPOperPSDefActionRemoveComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm6 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 6 } tRPOperPSDefActionRemoveComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm7 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 7 } tRPOperPSDefActionRemoveComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm8 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 8 } tRPOperPSDefActionRemoveComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm9 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 9 } tRPOperPSDefActionRemoveComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm10 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 10 } tRPOperPSDefActionRemoveComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm11 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 11 } tRPOperPSDefActionRemoveComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm12 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 12 } tRPOperPSDefActionRemoveComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm13 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 13 } tRPOperPSDefActionRemoveComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm14 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 14 } tRPOperPSDefActionRemoveComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm15 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 15 } tRPOperPSDefActionRemoveComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm16 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 16 } tRPOperPSDefActionRemoveComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm17 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 17 } tRPOperPSDefActionRemoveComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm18 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 18 } tRPOperPSDefActionRemoveComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm19 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 19 } tRPOperPSDefActionRemoveComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm20 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 20 } tRPOperPSDefActionRemoveComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm21 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 21 } tRPOperPSDefActionRemoveComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm22 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 22 } tRPOperPSDefActionRemoveComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm23 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 23 } tRPOperPSDefActionRemoveComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm24 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 24 } tRPOperPSDefActionRemoveComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm25 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 25 } tRPOperPSDefActionRemoveComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm26 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 26 } tRPOperPSDefActionRemoveComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm27 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 27 } tRPOperPSDefActionRemoveComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionRemoveComm28 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSDefActionRemCommEntry 28 } tRPOperPSDefActionRepCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSDefActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default community names for a policy statement to replace in routes." ::= { tRPOperValueObjects 30 } tRPOperPSDefActionRepCommEntry OBJECT-TYPE SYNTAX TRPOperPSDefActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These communities are applied when the default action for the policy statement (tRPOperPolicyStatementDefaultAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPOperPSDefaultActionParamsTable is created or deleted." AUGMENTS { tRPOperPSDefaultActionParamsEntry } ::= { tRPOperPSDefActionRepCommTable 1 } TRPOperPSDefActionRepCommEntry ::= SEQUENCE { tRPOperPSDefActionReplaceComm1 TLCommunityName, tRPOperPSDefActionReplaceComm2 TLCommunityName, tRPOperPSDefActionReplaceComm3 TLCommunityName, tRPOperPSDefActionReplaceComm4 TLCommunityName, tRPOperPSDefActionReplaceComm5 TLCommunityName, tRPOperPSDefActionReplaceComm6 TLCommunityName, tRPOperPSDefActionReplaceComm7 TLCommunityName, tRPOperPSDefActionReplaceComm8 TLCommunityName, tRPOperPSDefActionReplaceComm9 TLCommunityName, tRPOperPSDefActionReplaceComm10 TLCommunityName, tRPOperPSDefActionReplaceComm11 TLCommunityName, tRPOperPSDefActionReplaceComm12 TLCommunityName, tRPOperPSDefActionReplaceComm13 TLCommunityName, tRPOperPSDefActionReplaceComm14 TLCommunityName, tRPOperPSDefActionReplaceComm15 TLCommunityName, tRPOperPSDefActionReplaceComm16 TLCommunityName, tRPOperPSDefActionReplaceComm17 TLCommunityName, tRPOperPSDefActionReplaceComm18 TLCommunityName, tRPOperPSDefActionReplaceComm19 TLCommunityName, tRPOperPSDefActionReplaceComm20 TLCommunityName, tRPOperPSDefActionReplaceComm21 TLCommunityName, tRPOperPSDefActionReplaceComm22 TLCommunityName, tRPOperPSDefActionReplaceComm23 TLCommunityName, tRPOperPSDefActionReplaceComm24 TLCommunityName, tRPOperPSDefActionReplaceComm25 TLCommunityName, tRPOperPSDefActionReplaceComm26 TLCommunityName, tRPOperPSDefActionReplaceComm27 TLCommunityName, tRPOperPSDefActionReplaceComm28 TLCommunityName } tRPOperPSDefActionReplaceComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm1 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 1 } tRPOperPSDefActionReplaceComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm2 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 2 } tRPOperPSDefActionReplaceComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm3 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 3 } tRPOperPSDefActionReplaceComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm4 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 4 } tRPOperPSDefActionReplaceComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm5 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 5 } tRPOperPSDefActionReplaceComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm6 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 6 } tRPOperPSDefActionReplaceComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm7 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 7 } tRPOperPSDefActionReplaceComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm8 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 8 } tRPOperPSDefActionReplaceComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm9 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 9 } tRPOperPSDefActionReplaceComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm10 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 10 } tRPOperPSDefActionReplaceComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm11 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 11 } tRPOperPSDefActionReplaceComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm12 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 12 } tRPOperPSDefActionReplaceComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm13 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 13 } tRPOperPSDefActionReplaceComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm14 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 14 } tRPOperPSDefActionReplaceComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm15 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 15 } tRPOperPSDefActionReplaceComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm16 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 16 } tRPOperPSDefActionReplaceComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm17 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 17 } tRPOperPSDefActionReplaceComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm18 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 18 } tRPOperPSDefActionReplaceComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm19 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 19 } tRPOperPSDefActionReplaceComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm20 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 20 } tRPOperPSDefActionReplaceComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm21 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 21 } tRPOperPSDefActionReplaceComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm22 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 22 } tRPOperPSDefActionReplaceComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm23 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 23 } tRPOperPSDefActionReplaceComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm24 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 24 } tRPOperPSDefActionReplaceComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm25 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 25 } tRPOperPSDefActionReplaceComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm26 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 26 } tRPOperPSDefActionReplaceComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm27 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 27 } tRPOperPSDefActionReplaceComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActionReplaceComm28 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSDefActionRepCommEntry 28 } tRPOperPSAccActionAddCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSAccActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community names for a policy statement entry to add to routes." ::= { tRPOperValueObjects 31 } tRPOperPSAccActionAddCommEntry OBJECT-TYPE SYNTAX TRPOperPSAccActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information about a particular policy statement entry. These communities are applied when the action for the policy statement entry (tRPOperPSParamsAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPOperPSAcceptActionParamsTable is created or deleted." AUGMENTS { tRPOperPSAcceptActionParamsEntry } ::= { tRPOperPSAccActionAddCommTable 1 } TRPOperPSAccActionAddCommEntry ::= SEQUENCE { tRPOperPSAccActionAddComm1 TLCommunityName, tRPOperPSAccActionAddComm2 TLCommunityName, tRPOperPSAccActionAddComm3 TLCommunityName, tRPOperPSAccActionAddComm4 TLCommunityName, tRPOperPSAccActionAddComm5 TLCommunityName, tRPOperPSAccActionAddComm6 TLCommunityName, tRPOperPSAccActionAddComm7 TLCommunityName, tRPOperPSAccActionAddComm8 TLCommunityName, tRPOperPSAccActionAddComm9 TLCommunityName, tRPOperPSAccActionAddComm10 TLCommunityName, tRPOperPSAccActionAddComm11 TLCommunityName, tRPOperPSAccActionAddComm12 TLCommunityName, tRPOperPSAccActionAddComm13 TLCommunityName, tRPOperPSAccActionAddComm14 TLCommunityName, tRPOperPSAccActionAddComm15 TLCommunityName, tRPOperPSAccActionAddComm16 TLCommunityName, tRPOperPSAccActionAddComm17 TLCommunityName, tRPOperPSAccActionAddComm18 TLCommunityName, tRPOperPSAccActionAddComm19 TLCommunityName, tRPOperPSAccActionAddComm20 TLCommunityName, tRPOperPSAccActionAddComm21 TLCommunityName, tRPOperPSAccActionAddComm22 TLCommunityName, tRPOperPSAccActionAddComm23 TLCommunityName, tRPOperPSAccActionAddComm24 TLCommunityName, tRPOperPSAccActionAddComm25 TLCommunityName, tRPOperPSAccActionAddComm26 TLCommunityName, tRPOperPSAccActionAddComm27 TLCommunityName, tRPOperPSAccActionAddComm28 TLCommunityName, tRPOperPSAccActionAddCommCrOrig TmnxCreateOrigin } tRPOperPSAccActionAddComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm1 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 1 } tRPOperPSAccActionAddComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm2 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 2 } tRPOperPSAccActionAddComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm3 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 3 } tRPOperPSAccActionAddComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm4 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 4 } tRPOperPSAccActionAddComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm5 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 5 } tRPOperPSAccActionAddComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm6 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 6 } tRPOperPSAccActionAddComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm7 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 7 } tRPOperPSAccActionAddComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm8 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 8 } tRPOperPSAccActionAddComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm9 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 9 } tRPOperPSAccActionAddComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm10 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 10 } tRPOperPSAccActionAddComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm11 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 11 } tRPOperPSAccActionAddComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm12 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 12 } tRPOperPSAccActionAddComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm13 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 13 } tRPOperPSAccActionAddComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm14 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 14 } tRPOperPSAccActionAddComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm15 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 15 } tRPOperPSAccActionAddComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm16 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 16 } tRPOperPSAccActionAddComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm17 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 17 } tRPOperPSAccActionAddComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm18 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 18 } tRPOperPSAccActionAddComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm19 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 19 } tRPOperPSAccActionAddComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm20 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 20 } tRPOperPSAccActionAddComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm21 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 21 } tRPOperPSAccActionAddComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm22 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 22 } tRPOperPSAccActionAddComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm23 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 23 } tRPOperPSAccActionAddComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm24 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 24 } tRPOperPSAccActionAddComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm25 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 25 } tRPOperPSAccActionAddComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm26 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 26 } tRPOperPSAccActionAddComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm27 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 27 } tRPOperPSAccActionAddComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionAddComm28 indicates a community name to add to any existing community for the route." ::= { tRPOperPSAccActionAddCommEntry 28 } tRPOperPSAccActionAddCommCrOrig OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPSAccActionAddCommCrOrig indicates the mechanism used to create this entry." ::= { tRPOperPSAccActionAddCommEntry 29 } tRPOperPSAccActionRemCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSAccActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community names for a policy statement entry to remove from routes." ::= { tRPOperValueObjects 32 } tRPOperPSAccActionRemCommEntry OBJECT-TYPE SYNTAX TRPOperPSAccActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information about a particular policy statement entry. These communities are applied when the action for the policy statement entry (tRPOperPSParamsAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPOperPSAcceptActionParamsTable is created or deleted." AUGMENTS { tRPOperPSAcceptActionParamsEntry } ::= { tRPOperPSAccActionRemCommTable 1 } TRPOperPSAccActionRemCommEntry ::= SEQUENCE { tRPOperPSAccActionRemoveComm1 TLCommunityName, tRPOperPSAccActionRemoveComm2 TLCommunityName, tRPOperPSAccActionRemoveComm3 TLCommunityName, tRPOperPSAccActionRemoveComm4 TLCommunityName, tRPOperPSAccActionRemoveComm5 TLCommunityName, tRPOperPSAccActionRemoveComm6 TLCommunityName, tRPOperPSAccActionRemoveComm7 TLCommunityName, tRPOperPSAccActionRemoveComm8 TLCommunityName, tRPOperPSAccActionRemoveComm9 TLCommunityName, tRPOperPSAccActionRemoveComm10 TLCommunityName, tRPOperPSAccActionRemoveComm11 TLCommunityName, tRPOperPSAccActionRemoveComm12 TLCommunityName, tRPOperPSAccActionRemoveComm13 TLCommunityName, tRPOperPSAccActionRemoveComm14 TLCommunityName, tRPOperPSAccActionRemoveComm15 TLCommunityName, tRPOperPSAccActionRemoveComm16 TLCommunityName, tRPOperPSAccActionRemoveComm17 TLCommunityName, tRPOperPSAccActionRemoveComm18 TLCommunityName, tRPOperPSAccActionRemoveComm19 TLCommunityName, tRPOperPSAccActionRemoveComm20 TLCommunityName, tRPOperPSAccActionRemoveComm21 TLCommunityName, tRPOperPSAccActionRemoveComm22 TLCommunityName, tRPOperPSAccActionRemoveComm23 TLCommunityName, tRPOperPSAccActionRemoveComm24 TLCommunityName, tRPOperPSAccActionRemoveComm25 TLCommunityName, tRPOperPSAccActionRemoveComm26 TLCommunityName, tRPOperPSAccActionRemoveComm27 TLCommunityName, tRPOperPSAccActionRemoveComm28 TLCommunityName } tRPOperPSAccActionRemoveComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm1 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 1 } tRPOperPSAccActionRemoveComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm2 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 2 } tRPOperPSAccActionRemoveComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm3 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 3 } tRPOperPSAccActionRemoveComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm4 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 4 } tRPOperPSAccActionRemoveComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm5 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 5 } tRPOperPSAccActionRemoveComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm6 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 6 } tRPOperPSAccActionRemoveComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm7 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 7 } tRPOperPSAccActionRemoveComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm8 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 8 } tRPOperPSAccActionRemoveComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm9 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 9 } tRPOperPSAccActionRemoveComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm10 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 10 } tRPOperPSAccActionRemoveComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm11 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 11 } tRPOperPSAccActionRemoveComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm12 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 12 } tRPOperPSAccActionRemoveComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm13 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 13 } tRPOperPSAccActionRemoveComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm14 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 14 } tRPOperPSAccActionRemoveComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm15 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 15 } tRPOperPSAccActionRemoveComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm16 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 16 } tRPOperPSAccActionRemoveComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm17 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 17 } tRPOperPSAccActionRemoveComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm18 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 18 } tRPOperPSAccActionRemoveComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm19 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 19 } tRPOperPSAccActionRemoveComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm20 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 20 } tRPOperPSAccActionRemoveComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm21 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 21 } tRPOperPSAccActionRemoveComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm22 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 22 } tRPOperPSAccActionRemoveComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm23 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 23 } tRPOperPSAccActionRemoveComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm24 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 24 } tRPOperPSAccActionRemoveComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm25 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 25 } tRPOperPSAccActionRemoveComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm26 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 26 } tRPOperPSAccActionRemoveComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm27 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 27 } tRPOperPSAccActionRemoveComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionRemoveComm28 indicates a community name to remove from any existing community for the route." ::= { tRPOperPSAccActionRemCommEntry 28 } tRPOperPSAccActionRepCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSAccActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community names for a policy statement entry to replace in routes." ::= { tRPOperValueObjects 33 } tRPOperPSAccActionRepCommEntry OBJECT-TYPE SYNTAX TRPOperPSAccActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information about a particular policy statement entry. These communities are applied when the action for the policy statement entry (tRPOperPSParamsAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPOperPSAcceptActionParamsTable is created or deleted." AUGMENTS { tRPOperPSAcceptActionParamsEntry } ::= { tRPOperPSAccActionRepCommTable 1 } TRPOperPSAccActionRepCommEntry ::= SEQUENCE { tRPOperPSAccActionReplaceComm1 TLCommunityName, tRPOperPSAccActionReplaceComm2 TLCommunityName, tRPOperPSAccActionReplaceComm3 TLCommunityName, tRPOperPSAccActionReplaceComm4 TLCommunityName, tRPOperPSAccActionReplaceComm5 TLCommunityName, tRPOperPSAccActionReplaceComm6 TLCommunityName, tRPOperPSAccActionReplaceComm7 TLCommunityName, tRPOperPSAccActionReplaceComm8 TLCommunityName, tRPOperPSAccActionReplaceComm9 TLCommunityName, tRPOperPSAccActionReplaceComm10 TLCommunityName, tRPOperPSAccActionReplaceComm11 TLCommunityName, tRPOperPSAccActionReplaceComm12 TLCommunityName, tRPOperPSAccActionReplaceComm13 TLCommunityName, tRPOperPSAccActionReplaceComm14 TLCommunityName, tRPOperPSAccActionReplaceComm15 TLCommunityName, tRPOperPSAccActionReplaceComm16 TLCommunityName, tRPOperPSAccActionReplaceComm17 TLCommunityName, tRPOperPSAccActionReplaceComm18 TLCommunityName, tRPOperPSAccActionReplaceComm19 TLCommunityName, tRPOperPSAccActionReplaceComm20 TLCommunityName, tRPOperPSAccActionReplaceComm21 TLCommunityName, tRPOperPSAccActionReplaceComm22 TLCommunityName, tRPOperPSAccActionReplaceComm23 TLCommunityName, tRPOperPSAccActionReplaceComm24 TLCommunityName, tRPOperPSAccActionReplaceComm25 TLCommunityName, tRPOperPSAccActionReplaceComm26 TLCommunityName, tRPOperPSAccActionReplaceComm27 TLCommunityName, tRPOperPSAccActionReplaceComm28 TLCommunityName } tRPOperPSAccActionReplaceComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm1 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 1 } tRPOperPSAccActionReplaceComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm2 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 2 } tRPOperPSAccActionReplaceComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm3 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 3 } tRPOperPSAccActionReplaceComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm4 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 4 } tRPOperPSAccActionReplaceComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm5 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 5 } tRPOperPSAccActionReplaceComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm6 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 6 } tRPOperPSAccActionReplaceComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm7 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 7 } tRPOperPSAccActionReplaceComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm8 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 8 } tRPOperPSAccActionReplaceComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm9 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 9 } tRPOperPSAccActionReplaceComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm10 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 10 } tRPOperPSAccActionReplaceComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm11 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 11 } tRPOperPSAccActionReplaceComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm12 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 12 } tRPOperPSAccActionReplaceComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm13 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 13 } tRPOperPSAccActionReplaceComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm14 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 14 } tRPOperPSAccActionReplaceComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm15 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 15 } tRPOperPSAccActionReplaceComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm16 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 16 } tRPOperPSAccActionReplaceComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm17 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 17 } tRPOperPSAccActionReplaceComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm18 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 18 } tRPOperPSAccActionReplaceComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm19 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 19 } tRPOperPSAccActionReplaceComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm20 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 20 } tRPOperPSAccActionReplaceComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm21 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 21 } tRPOperPSAccActionReplaceComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm22 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 22 } tRPOperPSAccActionReplaceComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm23 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 23 } tRPOperPSAccActionReplaceComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm24 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 24 } tRPOperPSAccActionReplaceComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm25 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 25 } tRPOperPSAccActionReplaceComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm26 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 26 } tRPOperPSAccActionReplaceComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm27 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 27 } tRPOperPSAccActionReplaceComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAccActionReplaceComm28 indicates a community name to replace in any existing community for the route." ::= { tRPOperPSAccActionRepCommEntry 28 } tRPOperPSFromCriteriaExtTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSFromCriteriaExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table of tRPOperPSFromCriteriaTable containing extra from filter criteria for each policy statement entry." ::= { tRPOperValueObjects 34 } tRPOperPSFromCriteriaExtEntry OBJECT-TYPE SYNTAX TRPOperPSFromCriteriaExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry from criteria." AUGMENTS { tRPOperPSFromCriteriaEntry } ::= { tRPOperPSFromCriteriaExtTable 1 } TRPOperPSFromCriteriaExtEntry ::= SEQUENCE { tRPOperPSFromCritExtMvpnType TPolicyEntryCriteriaMvpnType, tRPOperPSFromCritSrcAddrPfxList TPrefixListName, tRPOperPSFromCritOrigValidState INTEGER, tRPOperPSFromCritFlowSrcPfxList TPrefixListName, tRPOperPSFromCritFlowDstPfxList TPrefixListName, tRPOperPSFromCritPathType TPolicyCritPathType, tRPOperPSFromCritASPathLength TPolicyValueOrVarNameOrEmpty, tRPOperPSFromCritASPathLenInd TPolicyMatchIndicator, tRPOperPSFromCritASPLenUnique TruthValue, tRPOperPSFromCritCommunityCount TPolicyValueOrVarNameOrEmpty, tRPOperPSFromCritCommCountInd TPolicyMatchIndicator, tRPOperPSFromCritCommCountType TPolicyCritCommunityType, tRPOperPSFromCritMetric TPolicyValueOrVarNameOrEmpty, tRPOperPSFromCritMetricInd TPolicyMatchIndicator, tRPOperPSFromCritLocalPref TPolicyValueOrVarNameOrEmpty, tRPOperPSFromCritLocalPrefInd TPolicyMatchIndicator, tRPOperPSFromCritClusterAddrTp1 InetAddressType, tRPOperPSFromCritClusterAddr1 InetAddress, tRPOperPSFromCritClusterPfxLen1 InetAddressPrefixLength, tRPOperPSFromCritClusterAddrTp2 InetAddressType, tRPOperPSFromCritClusterAddr2 InetAddress, tRPOperPSFromCritClusterPfxLen2 InetAddressPrefixLength, tRPOperPSFromCritClusterAddrTp3 InetAddressType, tRPOperPSFromCritClusterAddr3 InetAddress, tRPOperPSFromCritClusterPfxLen3 InetAddressPrefixLength, tRPOperPSFromCritClusterAddrTp4 InetAddressType, tRPOperPSFromCritClusterAddr4 InetAddress, tRPOperPSFromCritClusterPfxLen4 InetAddressPrefixLength, tRPOperPSFromCritClusterAddrTp5 InetAddressType, tRPOperPSFromCritClusterAddr5 InetAddress, tRPOperPSFromCritClusterPfxLen5 InetAddressPrefixLength, tRPOperPSFromCritClusterIdNone TruthValue, tRPOperPSFromCritNextHopAddrTyp InetAddressType, tRPOperPSFromCritNextHopAddr InetAddress, tRPOperPSFromCritNextHopPfxList TPrefixListName, tRPOperPSFromCritExtEvpnType TPolicyEntryCriteriaEvpnType, tRPOperPSFromCrAggrContributor TruthValue, tRPOperPSFromCrEndpointAddrTyp InetAddressType, tRPOperPSFromCrEndpointAddr InetAddress, tRPOperPSFromCritColor TNamedItemOrEmpty, tRPOperPSFromCritDistinguisher TNamedItemOrEmpty } tRPOperPSFromCritExtMvpnType OBJECT-TYPE SYNTAX TPolicyEntryCriteriaMvpnType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritExtMvpnType indicates the BGP route MVPN type to match on." ::= { tRPOperPSFromCriteriaExtEntry 1 } tRPOperPSFromCritSrcAddrPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritSrcAddrPfxList indicates the prefix list that is used to match the source address." ::= { tRPOperPSFromCriteriaExtEntry 2 } tRPOperPSFromCritOrigValidState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), valid (1), notFound (2), invalid (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritOrigValidState indicates the origin validation state criteria for this policy statement." DEFVAL { notApplicable } ::= { tRPOperPSFromCriteriaExtEntry 3 } tRPOperPSFromCritFlowSrcPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritFlowSrcPfxList indicates the prefix list that is used to match the flow-spec source." ::= { tRPOperPSFromCriteriaExtEntry 4 } tRPOperPSFromCritFlowDstPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritFlowDstPfxList indicates the prefix list that is used to match the flow-spec destination." ::= { tRPOperPSFromCriteriaExtEntry 5 } tRPOperPSFromCritPathType OBJECT-TYPE SYNTAX TPolicyCritPathType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPathType indicates the path type to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 6 } tRPOperPSFromCritASPathLength OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritASPathLength indicates the number of AS numbers in the AS-Path to match the BGP route on. The tRPOperPSFromCritASPathLength can be a string containing the AS-Path length in the range [0-255] or a variable name that needs to be resolved to get the AS-Path length." ::= { tRPOperPSFromCriteriaExtEntry 7 } tRPOperPSFromCritASPathLenInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritASPathLenInd indicates whether higher or lower AS-Path lengths are accepted for the tRPOperPSFromCritASPathLength criteria to match on." ::= { tRPOperPSFromCriteriaExtEntry 8 } tRPOperPSFromCritASPLenUnique OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritASPLenUnique indicates whether only unique AS numbers should be considered for the tRPOperPSFromCritASPathLength criteria to match on. When the value is true, multiple occurences of the same AS number in the AS-Path count as 1 for calculating the AS-Path length." ::= { tRPOperPSFromCriteriaExtEntry 9 } tRPOperPSFromCritCommunityCount OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritCommunityCount indicates the number of BGP communities to match the BGP route on. The tRPOperPSFromCritCommunityCount can be a string containing the number of communities in the range [0-1024] or a variable name that needs to be resolved to get the community count." ::= { tRPOperPSFromCriteriaExtEntry 10 } tRPOperPSFromCritCommCountInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritCommCountInd indicates whether higher or lower community counts are accepted for the tRPOperPSFromCritCommunityCount criteria to match on." ::= { tRPOperPSFromCriteriaExtEntry 11 } tRPOperPSFromCritCommCountType OBJECT-TYPE SYNTAX TPolicyCritCommunityType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritCommCountType indicates which communities should be counted for the tRPOperPSFromCritCommunityCount criteria to match on." ::= { tRPOperPSFromCriteriaExtEntry 12 } tRPOperPSFromCritMetric OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritMetric indicates the metric to match the BGP route on. The tRPOperPSFromCritMetric can be a string containing the metric value in the range [0..4294967295] or a variable name that needs to be resolved to get the metric value." ::= { tRPOperPSFromCriteriaExtEntry 13 } tRPOperPSFromCritMetricInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritMetricInd indicates whether higher or lower metric values are accepted for the tRPOperPSFromCritMetric criteria to match on." ::= { tRPOperPSFromCriteriaExtEntry 14 } tRPOperPSFromCritLocalPref OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritLocalPref indicates the local preference to match the BGP route on. The tRPOperPSFromCritLocalPref can be a string containing the local preference value in the range [0..4294967295] or a variable name that needs to be resolved to get the local preference value." ::= { tRPOperPSFromCriteriaExtEntry 15 } tRPOperPSFromCritLocalPrefInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritLocalPrefInd indicates whether higher or lower local preference values are accepted for the tRPOperPSFromCritLocalPref criteria to match on." ::= { tRPOperPSFromCriteriaExtEntry 16 } tRPOperPSFromCritClusterAddrTp1 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddrTp1 indicates the address type of tRPOperPSFromCritClusterAddr1." ::= { tRPOperPSFromCriteriaExtEntry 17 } tRPOperPSFromCritClusterAddr1 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddr1 indicates the first IP address encoded within the cluster list attribute to match the BGP route on. The first IP address mask pair is matched against the most recently added cluster id." ::= { tRPOperPSFromCriteriaExtEntry 18 } tRPOperPSFromCritClusterPfxLen1 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterPfxLen1 indicates the length of the first IP address encoded within the cluster list attribute to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 19 } tRPOperPSFromCritClusterAddrTp2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddrTp2 indicates the address type of tRPOperPSFromCritClusterAddr2." ::= { tRPOperPSFromCriteriaExtEntry 20 } tRPOperPSFromCritClusterAddr2 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddr2 indicates the second IP address encoded within the cluster list attribute to match the BGP route on. The second IP address mask pair is matched against the second most recent added cluster id." ::= { tRPOperPSFromCriteriaExtEntry 21 } tRPOperPSFromCritClusterPfxLen2 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterPfxLen2 indicates the length of the second IP address encoded within the cluster list attribute to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 22 } tRPOperPSFromCritClusterAddrTp3 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddrTp3 indicates the address type of tRPOperPSFromCritClusterAddr3." ::= { tRPOperPSFromCriteriaExtEntry 23 } tRPOperPSFromCritClusterAddr3 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddr3 indicates the third IP address encoded within the cluster list attribute to match the BGP route on. The third IP address mask pair is matched against the third most recent added cluster id." ::= { tRPOperPSFromCriteriaExtEntry 24 } tRPOperPSFromCritClusterPfxLen3 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterPfxLen3 indicates the length of the third IP address encoded within the cluster list attribute to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 25 } tRPOperPSFromCritClusterAddrTp4 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddrTp4 indicates the address type of tRPOperPSFromCritClusterAddr4." ::= { tRPOperPSFromCriteriaExtEntry 26 } tRPOperPSFromCritClusterAddr4 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddr4 indicates the fourth IP address encoded within the cluster list attribute to match the BGP route on. The fourth IP address mask pair is matched against the fourth most recent added cluster id." ::= { tRPOperPSFromCriteriaExtEntry 27 } tRPOperPSFromCritClusterPfxLen4 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterPfxLen4 indicates the length of the fourth IP address encoded within the cluster list attribute to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 28 } tRPOperPSFromCritClusterAddrTp5 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddrTp5 indicates the address type of tRPOperPSFromCritClusterAddr5." ::= { tRPOperPSFromCriteriaExtEntry 29 } tRPOperPSFromCritClusterAddr5 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterAddr5 indicates the fifth IP address encoded within the cluster list attribute to match the BGP route on. The fifth IP address mask pair is matched against the fifth most recent added cluster id." ::= { tRPOperPSFromCriteriaExtEntry 30 } tRPOperPSFromCritClusterPfxLen5 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterPfxLen5 indicates the length of the fifth IP address encoded within the cluster list attribute to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 31 } tRPOperPSFromCritClusterIdNone OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritClusterIdNone indicates whether only routes without any cluster list attribute should be matched on. When tRPOperPSFromCritClusterIdNone is set to true, only routes without any cluster list attribute are matched. The cluster id none criteria is ignored when a cluster id IP address criteria is configured." ::= { tRPOperPSFromCriteriaExtEntry 32 } tRPOperPSFromCritNextHopAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNextHopAddrTyp indicates the address type of tRPOperPSFromCritNextHopAddr." ::= { tRPOperPSFromCriteriaExtEntry 33 } tRPOperPSFromCritNextHopAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNextHopAddr indicates the next-hop IP address to match the BGP route on." ::= { tRPOperPSFromCriteriaExtEntry 34 } tRPOperPSFromCritNextHopPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritNextHopPfxList indicates the next-hop prefix list to match the BGP route on. The next-hop prefix list criteria is ignored when a next-hop IP address criteria is configured in object tRPOperPSFromCritNextHopAddr." ::= { tRPOperPSFromCriteriaExtEntry 35 } tRPOperPSFromCritExtEvpnType OBJECT-TYPE SYNTAX TPolicyEntryCriteriaEvpnType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritExtEvpnType indicates the BGP route EVPN type to match on." ::= { tRPOperPSFromCriteriaExtEntry 37 } tRPOperPSFromCrAggrContributor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCrAggrContributor indicates whether aggregate contributor routes should be matched on. When the value is 'true', only the more-specific prefixes that are actually contributors are matched." ::= { tRPOperPSFromCriteriaExtEntry 38 } tRPOperPSFromCrEndpointAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCrEndpointAddrTyp indicates the address type of tRPOperPSFromCrEndpointAddr." ::= { tRPOperPSFromCriteriaExtEntry 39 } tRPOperPSFromCrEndpointAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCrEndpointAddr indicates the SR policy endpoint IP address to match the route on. This match criterion is only used in import policies." ::= { tRPOperPSFromCriteriaExtEntry 40 } tRPOperPSFromCritColor OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritColor indicates the SR policy color ID to match the route on. The value of this object can be a string containing the SR policy color ID value in the range [0..4294967295]. An empty string means that it is disabled. This match criterion is only used in import policies." ::= { tRPOperPSFromCriteriaExtEntry 41 } tRPOperPSFromCritDistinguisher OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritDistinguisher indicates the SR policy distinguisher to match the route on. The value of this object can be a string containing the SR policy distinguisher value in the range [0..4294967295]. An empty string means that it is disabled. This match criterion is only used in import policies." ::= { tRPOperPSFromCriteriaExtEntry 42 } tRPOperPSPolicyVariableTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSPolicyVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information to resolve variables used in tRPOperPSFromCriteriaTable." ::= { tRPOperValueObjects 35 } tRPOperPSPolicyVariableEntry OBJECT-TYPE SYNTAX TRPOperPSPolicyVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maps a variable to a name for the corresponding entry in tRPOperPSFromCriteriaEntry if tRPOperPSFromCriteriaPolicy refers to a policy statement that uses variables in its tRPOperPSFromCriteriaTable, tRPOperPSAcceptActionParamsTable, tRPOperPSDefaultActionParamsTable, tRPOperPSAcptActParamsExtTable or tRPOperPSDefActParamsExtTable entries." INDEX { tRPOperPolicyStatementName, tRPOperPSFromCriteriaIndex, tRPOperPSPolicyVarName } ::= { tRPOperPSPolicyVariableTable 1 } TRPOperPSPolicyVariableEntry ::= SEQUENCE { tRPOperPSPolicyVarName TPolicyVariableName, tRPOperPSPolicyVarRowStatus RowStatus, tRPOperPSPolicyVarValue TNamedItemOrEmpty, tRPOperPSPolicyVarNumber Integer32, tRPOperPSPolicyVarType TPolicyVariableType, tRPOperPSPolicyVarAddressType InetAddressType, tRPOperPSPolicyVarAddress InetAddress, tRPOperPSPolicyVarDecimal TPolicyDecimal } tRPOperPSPolicyVarName OBJECT-TYPE SYNTAX TPolicyVariableName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarName indicates a variable name used in the tRPOperPSFromCriteriaTable, tRPOperPSAcceptActionParamsTable, tRPOperPSDefaultActionParamsTable, tRPOperPSAcptActParamsExtTable or tRPOperPSDefActParamsExtTable entry defined by tRPOperPSFromCriteriaPolicy. That entry uses this string as value for AS-path, AS-path-group, prefix list, community or damping objects." ::= { tRPOperPSPolicyVariableEntry 1 } tRPOperPSPolicyVarRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarRowStatus indicates the RowStatus for this row." ::= { tRPOperPSPolicyVariableEntry 2 } tRPOperPSPolicyVarValue OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarValue indicates the actual as-path name, as-path group name, prefix list name or community name to which tRPOperPSPolicyVarName is resolved. This object tRPOperPSPolicyVarValue is ignored when the object tRPOperPSPolicyVarType has a value different from string(1)." ::= { tRPOperPSPolicyVariableEntry 3 } tRPOperPSPolicyVarNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarNumber indicates the actual aigp metric value, as-path prepend value, local preference value, metric value or next-hop value to which tRPOperPSPolicyVarName is resolved. This object tRPOperPSPolicyVarNumber is ignored when the object tRPOperPSPolicyVarType has a value different from integer(2)." ::= { tRPOperPSPolicyVariableEntry 4 } tRPOperPSPolicyVarType OBJECT-TYPE SYNTAX TPolicyVariableType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarType indicates how to resolve the tRPOperPSPolicyVarName. string(1) - indicates that tRPOperPSPolicyVarValue is to be used integer(2) - indicates that tRPOperPSPolicyVarNumber is to be used address(3) - indicates that tRPOperPSPolicyVarAddressType and tRPOperPSPolicyVarAddress are to be used decimal(4) - indicates that tRPOperPSPolicyVarDecimal is to be used" ::= { tRPOperPSPolicyVariableEntry 5 } tRPOperPSPolicyVarAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarAddressType indicates the actual IP address type of the tRPOperPSPolicyVarAddress to which tRPOperPSPolicyVarName is resolved. This object tRPOperPSPolicyVarAddressType is ignored when the object tRPOperPSPolicyVarType has a value different then address(3)." ::= { tRPOperPSPolicyVariableEntry 6 } tRPOperPSPolicyVarAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarAddress indicates the actual next-hop address to which tRPOperPSPolicyVarName is resolved. This object tRPOperPSPolicyVarAddress is ignored when the object tRPOperPSPolicyVarType has a value different from address(3)." ::= { tRPOperPSPolicyVariableEntry 7 } tRPOperPSPolicyVarDecimal OBJECT-TYPE SYNTAX TPolicyDecimal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSPolicyVarDecimal indicates the actual decimal value to which tRPOperPSPolicyVarName is resolved. This object tRPOperPSPolicyVarDecimal is ignored when the object tRPOperPSPolicyVarType has a value different then decimal(4)." ::= { tRPOperPSPolicyVariableEntry 8 } tRPOperPSAcptActParamsExtTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSAcptActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table of tRPOperPSAcceptActionParamsTable containing extra accept-action parameters for each policy statement entry." ::= { tRPOperValueObjects 36 } tRPOperPSAcptActParamsExtEntry OBJECT-TYPE SYNTAX TRPOperPSAcptActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information for a policy statement entry." AUGMENTS { tRPOperPSAcceptActionParamsEntry } ::= { tRPOperPSAcptActParamsExtTable 1 } TRPOperPSAcptActParamsExtEntry ::= SEQUENCE { tRPOperPSAcptActStickyEcmp TruthValue, tRPOperPSAcptActAddPathSendLimit TPolicyAddPathSendLimit, tRPOperPSAcptActInstBackupPath TruthValue, tRPOperPSAcptActAdvertiseLabel TPolicyAdvertiseLabelMode, tRPOperPSAcptActBgpLeaking TruthValue, tRPOperPSAcptActAigpMetricSource TPolicyActionSource, tRPOperPSAcptActAigpMetricParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActASPathPendSource TPolicyActionSource, tRPOperPSAcptActASPathPendParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActLocalPrefSource TPolicyActionSource, tRPOperPSAcptActLocalPrefParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActMetricParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActNextHopSource TPolicyActionSource, tRPOperPSAcptActNextHopParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActOriginSource TPolicyActionSource, tRPOperPSAcptActOriginParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActOrigValStateSrc TPolicyActionSource, tRPOperPSAcptActOrigValStatePar TPolicyVariableNameOrEmpty, tRPOperPSAcptActPreferenceSource TPolicyActionSource, tRPOperPSAcptActPreferenceParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActTagSource TPolicyActionSource, tRPOperPSAcptActTagParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActOspfTypeSource TPolicyActionSource, tRPOperPSAcptActOspfTypeParam TPolicyVariableNameOrEmpty, tRPOperPSAcptActASPPendCountSrc TPolicyActionSource, tRPOperPSAcptActASPPendCountPar TPolicyVariableNameOrEmpty, tRPOperPSAcptActASPPndMstRecent TruthValue, tRPOperPSAcptActCreateUdpTunnel TruthValue, tRPOperPSAcptActResolveStatic TruthValue, tRPOperPSAcptActAdminTagPolicy TPolicyAdminTagPolicyOrVarName, tRPOperPSAcptActBgpMedSource TPolicyBgpMedSource, tRPOperPSAcptActBgpMedValue TPolicyValueOrVarNameOrEmpty, tRPOperPSAcptActBgpMedExpr TPolicyBgpMedExpression, tRPOperPSAcptActDisableRtInstall TruthValue, tRPOperPSAcptActSrLabelIndex TPolicyValueOrVarNameOrEmpty, tRPOperPSAcptActSrLblIndPrefIgp TruthValue, tRPOperPSAcptActNextHopPeerAddr TruthValue, tRPOperPSAcptActBgpHighPriority TruthValue, tRPOperPSAcptActFlexAlgo TPolicyValueOrVarNameOrEmpty, tRPOperPSAcptActBgpTunnelMetric TPolicyValueOrVarNameOrEmpty, tRPOperPSAcptActBgpTMetPrefAigp TruthValue, tRPOperPSAcptActEgressStats TruthValue, tRPOperPSAcptActIngressStats TruthValue, tRPOperPSAcptActSrMaintPolicy TNamedItemOrEmpty } tRPOperPSAcptActStickyEcmp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActStickyEcmp indicates whether sticky ECMP hash is applied to the route. When the value of tRPOperPSAcptActStickyEcmp is true and one or more of the multiple ECMP next-hops go down, then the unaffected traffic flows continues to be hashed to the same next-hops as prior to the failures; the affected traffic flows are redistributed as evenly as possible to the remaining next-hops." ::= { tRPOperPSAcptActParamsExtEntry 1 } tRPOperPSAcptActAddPathSendLimit OBJECT-TYPE SYNTAX TPolicyAddPathSendLimit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActAddPathSendLimit indicates the operational value for the ADD-PATH send limit for this policy statement." ::= { tRPOperPSAcptActParamsExtEntry 2 } tRPOperPSAcptActInstBackupPath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActInstBackupPath indicates whether the installation of a backup path is desired for the route matching this entry." ::= { tRPOperPSAcptActParamsExtEntry 3 } tRPOperPSAcptActAdvertiseLabel OBJECT-TYPE SYNTAX TPolicyAdvertiseLabelMode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActAdvertiseLabel indicates the advertisement label mode for the route matching this entry." ::= { tRPOperPSAcptActParamsExtEntry 4 } tRPOperPSAcptActBgpLeaking OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpLeaking indicates whether BGP leaking is applied for the route matching this entry. When the value of tRPOperPSAcptActBgpLeaking is true, the BGP route is leaked into a VPRN according to the user configured policies." ::= { tRPOperPSAcptActParamsExtEntry 5 } tRPOperPSAcptActAigpMetricSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActAigpMetricSource indicates the source of the accept action AIGP (Accumulated IGP) metric. The value 'actionValue(1)' means the AIGP metric value is the value of tRPOperPSAcptActnAigpMetricVal; the value of the object tRPOperPSAcptActAigpMetricParam is ignored. The value 'actionParam(2) means the AIGP metric value is derived from the object tRPOperPSAcptActAigpMetricParam; the value of the object tRPOperPSAcptActnAigpMetricVal is ignored. When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActAigpMetricSource is ignored." ::= { tRPOperPSAcptActParamsExtEntry 6 } tRPOperPSAcptActAigpMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActAigpMetricParam indicates the variable name that must be resolved to get the value to be added or set for the route AIGP(Accumulated IGP) metric. The value of this object tRPOperPSAcptActAigpMetricParam is ignored when the object tRPOperPSAcptActAigpMetricSource has a value different from actionParam(2). When the value of tRPOperPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSAcptActAigpMetricParam is ignored." ::= { tRPOperPSAcptActParamsExtEntry 7 } tRPOperPSAcptActASPathPendSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActASPathPendSource indicates the source of the accept action AS Path prepend. The value 'actionValue(1)' means the AS Path prepend value is the value of tRPOperPSAcceptActionASPathPend; the value of the object tRPOperPSAcptActASPathPendParam is ignored. The value 'actionParam(2) means the AS Path prepend value is derived from the object tRPOperPSAcptActASPathPendParam; the value of the object tRPOperPSAcceptActionASPathPend is ignored." ::= { tRPOperPSAcptActParamsExtEntry 8 } tRPOperPSAcptActASPathPendParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActASPathPendParam indicates the variable name that must be resolved to get the AS Number to prepend to the AS-Path attribute of the route. The value of this object tRPOperPSAcptActASPathPendParam is ignored when the object tRPOperPSAcptActASPathPendSource has a value different from actionParam(2). The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPOperPSAcceptActionASPathPrependCount is zero and tRPOperPSAcptActASPPendCountSrc is set to actionValue(1)." ::= { tRPOperPSAcptActParamsExtEntry 9 } tRPOperPSAcptActLocalPrefSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActLocalPrefSource indicates the source of the accept action local preference. The value 'actionValue(1)' means the local preference value is the value of tRPOperPSAcceptActionLocalPreference; the value of the object tRPOperPSAcptActLocalPrefParam is ignored. The value 'actionParam(2) means the local preference value is derived from the object tRPOperPSAcptActLocalPrefParam; the value of the object tRPOperPSAcceptActionLocalPreference is ignored." ::= { tRPOperPSAcptActParamsExtEntry 10 } tRPOperPSAcptActLocalPrefParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActLocalPrefParam indicates the variable name that must be resolved to get the local preference for the route. The value of this object tRPOperPSAcptActLocalPrefParam is ignored when the object tRPOperPSAcptActLocalPrefSource has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 11 } tRPOperPSAcptActMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActMetricParam indicates the variable name that must be resolved to get the metric value for the route. The value of this object tRPOperPSAcptActMetricParam is ignored when the object tRPOperPSAcptActnMetricSource has a value different from metricParam(3)." ::= { tRPOperPSAcptActParamsExtEntry 12 } tRPOperPSAcptActNextHopSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActNextHopSource indicates the source of the accept action next-hop. The value 'actionValue(1)' means the next-hop address is the value of tRPOperPSAcptActInetNextHop and the address type is defined by tRPOperPSAcptActInetNextHopType; the value of the object tRPOperPSAcptActNextHopParam is ignored. The value 'actionParam(2) means the next-hop value is derived from the object tRPOperPSAcptActNextHopParam; the value of the object tRPOperPSAcptActInetNextHop and tRPOperPSAcptActInetNextHopType are ignored." ::= { tRPOperPSAcptActParamsExtEntry 13 } tRPOperPSAcptActNextHopParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActNextHopParam indicates the variable name that must be resolved to get the next-hop IP address in the route. The value of this object tRPOperPSAcptActNextHopParam is ignored when the object tRPOperPSAcptActNextHopSource has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 14 } tRPOperPSAcptActOriginSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActOriginSource indicates the source of the route origin accept action. The value 'actionValue(1)' means the origin is the value of tRPOperPSAcceptActionOrigin; the value of the object tRPOperPSAcptActOriginParam is ignored. The value 'actionParam(2) means the origin value is derived from the object tRPOperPSAcptActOriginParam; the value of the object tRPOperPSAcceptActionOrigin is ignored." ::= { tRPOperPSAcptActParamsExtEntry 15 } tRPOperPSAcptActOriginParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActOriginParam indicates the variable name that must be resolved to get the origin of the route exported into BGP if it does not match an entry. The value of this object tRPOperPSAcptActOriginParam is ignored when the object tRPOperPSAcptActOriginSource has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 16 } tRPOperPSAcptActOrigValStateSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActOrigValStateSrc indicates the source of the origin validation state. The value 'actionValue(1)' means the origin validation state is the value of tRPOperPSAcptActnOrigValidState; the value of the object tRPOperPSAcptActOrigValStatePar is ignored. The value 'actionParam(2) means the origin validation state value is derived from the object tRPOperPSAcptActOrigValStatePar; the value of the object tRPOperPSAcptActnOrigValidState is ignored." ::= { tRPOperPSAcptActParamsExtEntry 17 } tRPOperPSAcptActOrigValStatePar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActOrigValStatePar indicates the variable name that must be resolved to get the origin validation state. The value of this object tRPOperPSAcptActOrigValStatePar is ignored when the object tRPOperPSAcptActOrigValStateSrc has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 18 } tRPOperPSAcptActPreferenceSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActPreferenceSource indicates the source of the preference accept action. The value 'actionValue(1)' means the preference is the value of tRPOperPSAcceptActionPreference; the value of the object tRPOperPSAcptActPreferenceParam is ignored. The value 'actionParam(2) means the preference value is derived from the object tRPOperPSAcptActPreferenceParam; the value of the object tRPOperPSAcceptActionPreference is ignored." ::= { tRPOperPSAcptActParamsExtEntry 19 } tRPOperPSAcptActPreferenceParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActPreferenceParam indicates the variable name that must be resolved to get the preference. The value of this object tRPOperPSAcptActPreferenceParam is ignored when the object tRPOperPSAcptActPreferenceSource has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 20 } tRPOperPSAcptActTagSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActTagSource indicates the source of the tag accept action. The value 'actionValue(1)' means the tag is the value of tRPOperPSAcceptActionTag; the value of the object tRPOperPSAcptActTagParam is ignored. The value 'actionParam(2) means the tag value is derived from the object tRPOperPSAcptActTagParam; the value of the object tRPOperPSAcceptActionTag is ignored." ::= { tRPOperPSAcptActParamsExtEntry 21 } tRPOperPSAcptActTagParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActTagParam indicates the variable name that must be resolved to get the tag for the route. The value of this object tRPOperPSAcptActTagParam is ignored when the object tRPOperPSAcptActTagSource has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 22 } tRPOperPSAcptActOspfTypeSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActOspfTypeSource indicates the source of the OSPF route type accept action. The value 'actionValue(1)' means the OSPF route type is the value of tRPOperPSAcceptActionOspfType; the value of the object tRPOperPSAcptActOspfTypeParam is ignored. The value 'actionParam(2) means the OSPF route type value is derived from the object tRPOperPSAcptActOspfTypeParam; the value of the object tRPOperPSAcceptActionOspfType is ignored." ::= { tRPOperPSAcptActParamsExtEntry 23 } tRPOperPSAcptActOspfTypeParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActOspfTypeParam indicates the variable name that must be resolved to get the OSPF route type to set in the route. The value of this object tRPOperPSAcptActOspfTypeParam is ignored when the object tRPOperPSAcptActOspfTypeSource has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 24 } tRPOperPSAcptActASPPendCountSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActASPPendCountSrc indicates the source of the accept action AS Path prepend repeat count. The value 'actionValue(1)' means the AS Path prepend count is the value of tRPOperPSAcceptActionASPathPrependCount; the value of the object tRPOperPSAcptActASPPendCountPar is ignored. The value 'actionParam(2) means the AS Path prepend count is derived from the object tRPOperPSAcptActASPPendCountPar; the value of the object tRPOperPSAcceptActionASPathPrependCount is ignored." ::= { tRPOperPSAcptActParamsExtEntry 26 } tRPOperPSAcptActASPPendCountPar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActASPPendCountPar indicates the variable name that must be resolved to get the number of times to prepend the AS number to the AS-Path attribute of the route. The value of this object is ignored when the object tRPOperPSAcptActASPPendCountSrc has a value different from actionParam(2)." ::= { tRPOperPSAcptActParamsExtEntry 27 } tRPOperPSAcptActASPPndMstRecent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActASPPndMstRecent indicates whether the most recent AS number must be prepended to the AS-Path attribute of the route. When the value of tRPOperPSAcptActASPPndMstRecent is true the last (most recent) ASN in the AS path is used to prepend to the AS-Path; tRPOperPSAcceptActionASPathPend and tRPOperPSAcptActASPathPendParam are ignored." ::= { tRPOperPSAcptActParamsExtEntry 28 } tRPOperPSAcptActCreateUdpTunnel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActCreateUdpTunnel indicates whether a UDP tunnel must be instantiated for the route matching this entry." ::= { tRPOperPSAcptActParamsExtEntry 29 } tRPOperPSAcptActResolveStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActResolveStatic indicates whether the BGP next-hop for the route matching this entry is the resolved next-hop of the static route. This object has only effect in BGP export policies and applies only to BGP routes created by exporting static routes with indirect next-hops. When the value of tRPOperPSAcptActResolveStatic is true, the BGP next-hop is the resolved next-hop of the static route. When the value is false, the BGP next-hop is copied from the indirect next-hop." ::= { tRPOperPSAcptActParamsExtEntry 30 } tRPOperPSAcptActAdminTagPolicy OBJECT-TYPE SYNTAX TPolicyAdminTagPolicyOrVarName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActAdminTagPolicy indicates the administrative tag policy for the route matching this entry. The tRPOperPSAcptActAdminTagPolicy can be a string containing the administrative tag policy or a variable name that needs to be resolved to get the administrative tag policy. The internal colour value assigned to the tag is associated with the route. If one or more tags are specified in the policy in an include/exclude, then the internal colours associated with those tags are assigned to the include/exclude list. Set to empty string to disable." ::= { tRPOperPSAcptActParamsExtEntry 31 } tRPOperPSAcptActBgpMedSource OBJECT-TYPE SYNTAX TPolicyBgpMedSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpMedSource indicates the source to resolve to get the BGP MED value. When the value is 'igp', the BGP MED value is set to the IGP cost of the route or tunnel that resolves the BGP next-hop of the received BGP route. When the value is 'minIgp', the BGP MED value is set to the minimum IGP cost; i.e. if the cost of the resolving route or tunnel increases the advertised MED is not changed. When the value is 'medValue', the BGP MED value is set to the value of tRPOperPSAcptActBgpMedValue. When the value is 'expression', the BGP MED value is set based on a calculation of the provided expression in tRPOperPSAcptActBgpMedExpr." ::= { tRPOperPSAcptActParamsExtEntry 32 } tRPOperPSAcptActBgpMedValue OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpMedValue indicates the the BGP MED value. The value of this object can be a string containing the BGP MED value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP MED value. The value of this object is ignored when the object tRPOperPSAcptActBgpMedSource has a value different from 'medValue'." ::= { tRPOperPSAcptActParamsExtEntry 33 } tRPOperPSAcptActBgpMedExpr OBJECT-TYPE SYNTAX TPolicyBgpMedExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpMedExpr indicates the expression that is used to calculate the BGP MED value. The value of this object is ignored when the object tRPOperPSAcptActBgpMedSource has a value different from 'expression'." ::= { tRPOperPSAcptActParamsExtEntry 34 } tRPOperPSAcptActDisableRtInstall OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActDisableRtInstall indicates whether to disable the installation of a BGP route in the Routing Table and the Forwarding Information Base (FIB)." ::= { tRPOperPSAcptActParamsExtEntry 35 } tRPOperPSAcptActSrLabelIndex OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActSrLabelIndex indicates the the Segment Routing (SR) Label Index value. The value of this object can be a string containing the SR label Index value in the range [0..524287] or a variable name that needs to be resolved to get the SR Label Index." ::= { tRPOperPSAcptActParamsExtEntry 36 } tRPOperPSAcptActSrLblIndPrefIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActSrLblIndPrefIgp indicates whether it is preferred to use the SR Label Index from the IGP route. When the value is 'true', BGP will use the SR Label Index from the IGP route when present else it will use the value from tRPOperPSAcptActSrLabelIndex. When the value is 'false', BGP will always use the tRPOperPSAcptActSrLabelIndex. The value of this object is ignored when the object tRPOperPSAcptActSrLabelIndex is empty." ::= { tRPOperPSAcptActParamsExtEntry 37 } tRPOperPSAcptActNextHopPeerAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActNextHopPeerAddr indicates whether the next-hop must be set to the peer address. This object cannot be 'true' when the other next-hop objects have a non-default value. When this object has a value of 'true' then tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSAcptActNextHopSource and tRPOperPSAcptActNextHopParam objects are disabled." ::= { tRPOperPSAcptActParamsExtEntry 38 } tRPOperPSAcptActBgpHighPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpHighPriority indicates whether the corresponding prefix must be marked in BGP as needing high priority treatment." ::= { tRPOperPSAcptActParamsExtEntry 39 } tRPOperPSAcptActFlexAlgo OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActFlexAlgo indicates the identifier of the Flexible Algorithm. The value of this object can be a string containing the Flex Algo Id value in the range [128..255] or a variable name that needs to be resolved to get the Flex Algo Id." ::= { tRPOperPSAcptActParamsExtEntry 40 } tRPOperPSAcptActBgpTunnelMetric OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpTunnelMetric indicates the the BGP Tunnel Metric value. The value of this object can be a string containing the BGP Tunnel Metric value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP Tunnel Metric." ::= { tRPOperPSAcptActParamsExtEntry 41 } tRPOperPSAcptActBgpTMetPrefAigp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActBgpTMetPrefAigp indicates whether it is preferred to use the value of the received AIGP attribute as BGP Tunnel Metric. If the value is 'true', the TTM metric is set to the value of the AIGP attribute if attached. If an AIGP metric is not attached or if the value is 'false', the tRPOperPSAcptActBgpTunnelMetric is set as TTM metric. The value of this object is ignored if the object tRPOperPSAcptActBgpTunnelMetric is empty." ::= { tRPOperPSAcptActParamsExtEntry 42 } tRPOperPSAcptActEgressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActEgressStats indicates whether to collect egress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." ::= { tRPOperPSAcptActParamsExtEntry 43 } tRPOperPSAcptActIngressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActIngressStats indicates whether to collect ingress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." ::= { tRPOperPSAcptActParamsExtEntry 44 } tRPOperPSAcptActSrMaintPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSAcptActSrMaintPolicy indicates the named segment routing (SR) maintenance policy for SR policy routes. The maintenance policy must exist in TIMETRA-SR-POLICY-MIB::vRtrSrMainPlcyTable. The value of this object can be a string containing the maintenance policy or a variable name that needs to be resolved to get the maintenance policy. An empty string means that is disabled." ::= { tRPOperPSAcptActParamsExtEntry 45 } tRPOperPSDefActParamsExtTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSDefActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table of tRPOperPSDefaultActionParamsTable containing extra default action parameters for each policy statement entry." ::= { tRPOperValueObjects 37 } tRPOperPSDefActParamsExtEntry OBJECT-TYPE SYNTAX TRPOperPSDefActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information for a policy statement entry." AUGMENTS { tRPOperPSDefaultActionParamsEntry } ::= { tRPOperPSDefActParamsExtTable 1 } TRPOperPSDefActParamsExtEntry ::= SEQUENCE { tRPOperPSDefActStickyEcmp TruthValue, tRPOperPSDefActAddPathSendLimit TPolicyAddPathSendLimit, tRPOperPSDefActInstBackupPath TruthValue, tRPOperPSDefActAdvertiseLabel TPolicyAdvertiseLabelMode, tRPOperPSDefActBgpLeaking TruthValue, tRPOperPSDefActAigpMetricSource TPolicyActionSource, tRPOperPSDefActAigpMetricParam TPolicyVariableNameOrEmpty, tRPOperPSDefActASPathPendSource TPolicyActionSource, tRPOperPSDefActASPathPendParam TPolicyVariableNameOrEmpty, tRPOperPSDefActLocalPrefSource TPolicyActionSource, tRPOperPSDefActLocalPrefParam TPolicyVariableNameOrEmpty, tRPOperPSDefActMetricParam TPolicyVariableNameOrEmpty, tRPOperPSDefActNextHopSource TPolicyActionSource, tRPOperPSDefActNextHopParam TPolicyVariableNameOrEmpty, tRPOperPSDefActOriginSource TPolicyActionSource, tRPOperPSDefActOriginParam TPolicyVariableNameOrEmpty, tRPOperPSDefActOrigValStateSrc TPolicyActionSource, tRPOperPSDefActOrigValStatePar TPolicyVariableNameOrEmpty, tRPOperPSDefActPreferenceSource TPolicyActionSource, tRPOperPSDefActPreferenceParam TPolicyVariableNameOrEmpty, tRPOperPSDefActTagSource TPolicyActionSource, tRPOperPSDefActTagParam TPolicyVariableNameOrEmpty, tRPOperPSDefActOspfTypeSource TPolicyActionSource, tRPOperPSDefActOspfTypeParam TPolicyVariableNameOrEmpty, tRPOperPSDefActASPPendCountSrc TPolicyActionSource, tRPOperPSDefActASPPendCountPar TPolicyVariableNameOrEmpty, tRPOperPSDefActASPPndMstRecent TruthValue, tRPOperPSDefActCreateUdpTunnel TruthValue, tRPOperPSDefActResolveStatic TruthValue, tRPOperPSDefActAdminTagPolicy TPolicyAdminTagPolicyOrVarName, tRPOperPSDefActBgpMedSource TPolicyBgpMedSource, tRPOperPSDefActBgpMedValue TPolicyValueOrVarNameOrEmpty, tRPOperPSDefActBgpMedExpr TPolicyBgpMedExpression, tRPOperPSDefActDisableRtInstall TruthValue, tRPOperPSDefActSrLabelIndex TPolicyValueOrVarNameOrEmpty, tRPOperPSDefActSrLblIndPrefIgp TruthValue, tRPOperPSDefActNextHopPeerAddr TruthValue, tRPOperPSDefActBgpHighPriority TruthValue, tRPOperPSDefActFlexAlgo TPolicyValueOrVarNameOrEmpty, tRPOperPSDefActBgpTunnelMetric TPolicyValueOrVarNameOrEmpty, tRPOperPSDefActBgpTMetPrefAigp TruthValue, tRPOperPSDefActEgressStats TruthValue, tRPOperPSDefActIngressStats TruthValue, tRPOperPSDefActSrMaintPolicy TNamedItemOrEmpty } tRPOperPSDefActStickyEcmp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActStickyEcmp indicates whether sticky ECMP hash is applied to the route. When the value of tRPOperPSDefActStickyEcmp is true and one or more of the multiple ECMP next-hops go down, then the unaffected traffic flows continues to be hashed to the same next-hops as prior to the failures; the affected traffic flows are redistributed as evenly as possible to the remaining next-hops." ::= { tRPOperPSDefActParamsExtEntry 1 } tRPOperPSDefActAddPathSendLimit OBJECT-TYPE SYNTAX TPolicyAddPathSendLimit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActAddPathSendLimit indicates the default operational ADD-PATH send limit for this policy statement." ::= { tRPOperPSDefActParamsExtEntry 2 } tRPOperPSDefActInstBackupPath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActInstBackupPath indicates whether the installation of a backup path is desired for the route matching this entry." ::= { tRPOperPSDefActParamsExtEntry 3 } tRPOperPSDefActAdvertiseLabel OBJECT-TYPE SYNTAX TPolicyAdvertiseLabelMode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActAdvertiseLabel indicates the operational advertisement label mode for the route matching this entry." ::= { tRPOperPSDefActParamsExtEntry 4 } tRPOperPSDefActBgpLeaking OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpLeaking indicates whether BGP leaking is applied for the route matching this entry. When the value of tRPOperPSDefActBgpLeaking is true, the BGP route is leaked into a VPRN according to the user configured policies." ::= { tRPOperPSDefActParamsExtEntry 5 } tRPOperPSDefActAigpMetricSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActAigpMetricSource indicates the source of the accept action AIGP (Accumulated IGP) metric. The value 'actionValue(1)' means the AIGP metric value is the value of tRPOperPSDefActnAigpMetricVal; the value of the object tRPOperPSDefActAigpMetricParam is ignored. The value 'actionParam(2) means the AIGP metric value is derived from the object tRPOperPSDefActAigpMetricParam; the value of the object tRPOperPSDefActnAigpMetricVal is ignored. When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActAigpMetricSource is ignored." ::= { tRPOperPSDefActParamsExtEntry 6 } tRPOperPSDefActAigpMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActAigpMetricParam indicates the variable name that must be resolved to get the value to be added or set for the route AIGP(Accumulated IGP) metric. The value of this object tRPOperPSDefActAigpMetricParam is ignored when the object tRPOperPSDefActAigpMetricSource has a value different from actionParam(2). When the value of tRPOperPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPOperPSDefActAigpMetricParam is ignored." ::= { tRPOperPSDefActParamsExtEntry 7 } tRPOperPSDefActASPathPendSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActASPathPendSource indicates the source of the default action AS Path prepend. The value 'actionValue(1)' means the AS Path prepend value is the value of tRPOperPSDefaultActionASPathPend; the value of the object tRPOperPSDefActASPathPendParam is ignored. The value 'actionParam(2) means the AS Path prepend value is derived from the object tRPOperPSDefActASPathPendParam; the value of the object tRPOperPSDefaultActionASPathPend is ignored." ::= { tRPOperPSDefActParamsExtEntry 8 } tRPOperPSDefActASPathPendParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActASPathPendParam indicates the variable name that must be resolved to get the AS Number to prepend to the AS-Path attribute of the route. The value of this object tRPOperPSDefActASPathPendParam is ignored when the object tRPOperPSDefActASPathPendSource has a value different from actionParam(2). The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPOperPSDefaultActionASPathPrependCount is zero and tRPOperPSDefActASPPendCountSrc is set to actionValue(1)." ::= { tRPOperPSDefActParamsExtEntry 9 } tRPOperPSDefActLocalPrefSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActLocalPrefSource indicates the source of the default action local preference. The value 'actionValue(1)' means the local preference value is the value of tRPOperPSDefaultActionLocalPreference; the value of the object tRPOperPSDefActLocalPrefParam is ignored. The value 'actionParam(2) means the local preference value is derived from the object tRPOperPSDefActLocalPrefParam; the value of the object tRPOperPSDefaultActionLocalPreference is ignored." ::= { tRPOperPSDefActParamsExtEntry 10 } tRPOperPSDefActLocalPrefParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActLocalPrefParam indicates the variable name that must be resolved to get the local preference for the route. The value of this object tRPOperPSDefActLocalPrefParam is ignored when the object tRPOperPSDefActLocalPrefSource has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 11 } tRPOperPSDefActMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActMetricParam indicates the variable name that must be resolved to get the metric value for the route. The value of this object tRPOperPSDefActMetricParam is ignored when the object tRPOperPSDefActionMetricSource has a value different from metricParam(3)." ::= { tRPOperPSDefActParamsExtEntry 12 } tRPOperPSDefActNextHopSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActNextHopSource indicates the source of the default action next-hop. The value 'actionValue(1)' means the next-hop address is the value of tRPOperPSDefActInetNextHop and the address type is defined by tRPOperPSDefActInetNextHopType; the value of the object tRPOperPSDefActNextHopParam is ignored. The value 'actionParam(2) means the next-hop value is derived from the object tRPOperPSDefActNextHopParam; the value of the object tRPOperPSDefActInetNextHop and tRPOperPSDefActInetNextHopType are ignored." ::= { tRPOperPSDefActParamsExtEntry 13 } tRPOperPSDefActNextHopParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActNextHopParam indicates the variable name that must be resolved to get the next-hop IP address in the route. The value of this object tRPOperPSDefActNextHopParam is ignored when the object tRPOperPSDefActNextHopSource has a value different from actionParam(2). Next-hop cannot refer to an address when the next-hop-self or peer-address is 'true'. When this object is set to a variable name then tRPOperPSDefaultActionNextHopSelf and tRPOperPSDefActNextHopPeerAddr are 'false'." ::= { tRPOperPSDefActParamsExtEntry 14 } tRPOperPSDefActOriginSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActOriginSource indicates the source of the route origin default action. The value 'actionValue(1)' means the origin is the value of tRPOperPSDefaultActionOrigin; the value of the object tRPOperPSDefActOriginParam is ignored. The value 'actionParam(2) means the origin value is derived from the object tRPOperPSDefActOriginParam; the value of the object tRPOperPSDefaultActionOrigin is ignored." ::= { tRPOperPSDefActParamsExtEntry 15 } tRPOperPSDefActOriginParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActOriginParam indicates the variable name that must be resolved to get the origin of the route exported into BGP if it does not match an entry. The value of this object tRPOperPSDefActOriginParam is ignored when the object tRPOperPSDefActOriginSource has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 16 } tRPOperPSDefActOrigValStateSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActOrigValStateSrc indicates the source of the origin validation state. The value 'actionValue(1)' means the origin validation state is the value of tRPOperPSDefActnOrigValidState; the value of the object tRPOperPSDefActOrigValStatePar is ignored. The value 'actionParam(2) means the origin validation state value is derived from the object tRPOperPSDefActOrigValStatePar; the value of the object tRPOperPSDefActnOrigValidState is ignored." ::= { tRPOperPSDefActParamsExtEntry 17 } tRPOperPSDefActOrigValStatePar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActOrigValStatePar indicates the variable name that must be resolved to get the origin validation state. The value of this object tRPOperPSDefActOrigValStatePar is ignored when the object tRPOperPSDefActOrigValStateSrc has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 18 } tRPOperPSDefActPreferenceSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActPreferenceSource indicates the source of the preference default action. The value 'actionValue(1)' means the preference is the value of tRPOperPSDefaultActionPreference; the value of the object tRPOperPSDefActPreferenceParam is ignored. The value 'actionParam(2) means the preference value is derived from the object tRPOperPSDefActPreferenceParam; the value of the object tRPOperPSDefaultActionPreference is ignored." ::= { tRPOperPSDefActParamsExtEntry 19 } tRPOperPSDefActPreferenceParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActPreferenceParam indicates the variable name that must be resolved to get the preference. The value of this object tRPOperPSDefActPreferenceParam is ignored when the object tRPOperPSDefActPreferenceSource has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 20 } tRPOperPSDefActTagSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActTagSource indicates the source of the tag default action. The value 'actionValue(1)' means the tag is the value of tRPOperPSDefaultActionTag; the value of the object tRPOperPSDefActTagParam is ignored. The value 'actionParam(2) means the tag value is derived from the object tRPOperPSDefActTagParam; the value of the object tRPOperPSDefaultActionTag is ignored." ::= { tRPOperPSDefActParamsExtEntry 21 } tRPOperPSDefActTagParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActTagParam indicates the variable name that must be resolved to get the tag for the route. The value of this object tRPOperPSDefActTagParam is ignored when the object tRPOperPSDefActTagSource has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 22 } tRPOperPSDefActOspfTypeSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActOspfTypeSource indicates the source of the OSPF route type default action. The value 'actionValue(1)' means the OSPF route type is the value of tRPOperPSDefaultActionOspfType; the value of the object tRPOperPSDefActOspfTypeParam is ignored. The value 'actionParam(2) means the OSPF route type value is derived from the object tRPOperPSDefActOspfTypeParam; the value of the object tRPOperPSDefaultActionOspfType is ignored." ::= { tRPOperPSDefActParamsExtEntry 23 } tRPOperPSDefActOspfTypeParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActOspfTypeParam indicates the variable name that must be resolved to get the OSPF route type for the route. The value of this object tRPOperPSDefActOspfTypeParam is ignored when the object tRPOperPSDefActOspfTypeSource has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 24 } tRPOperPSDefActASPPendCountSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActASPPendCountSrc indicates the source of the default action AS Path prepend repeat count. The value 'actionValue(1)' means the AS Path prepend count is the value of tRPOperPSDefaultActionASPathPrependCount; the value of the object tRPOperPSDefActASPPendCountPar is ignored. The value 'actionParam(2) means the AS Path prepend count is derived from the object tRPOperPSDefActASPPendCountPar; the value of the object tRPOperPSDefaultActionASPathPrependCount is ignored." ::= { tRPOperPSDefActParamsExtEntry 26 } tRPOperPSDefActASPPendCountPar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActASPPendCountPar indicates the variable name that must be resolved to get the number of times to prepend the AS number to the AS-Path attribute of the route. The value of this object is ignored when the object tRPOperPSDefActASPPendCountSrc has a value different from actionParam(2)." ::= { tRPOperPSDefActParamsExtEntry 27 } tRPOperPSDefActASPPndMstRecent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActASPPndMstRecent indicates whether the most recent AS number must be prepended to the AS-Path attribute of the route. When the value of tRPOperPSDefActASPPndMstRecent is true the last (most recent) ASN in the AS path is used to prepend to the AS-Path; tRPOperPSDefaultActionASPathPend and tRPOperPSDefActASPathPendParam are ignored." ::= { tRPOperPSDefActParamsExtEntry 28 } tRPOperPSDefActCreateUdpTunnel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActCreateUdpTunnel indicates whether a UDP tunnel must be instantiated for the route matching this entry." ::= { tRPOperPSDefActParamsExtEntry 29 } tRPOperPSDefActResolveStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActResolveStatic indicates whether the BGP next-hop for the route is the resolved next-hop of the static route. This object has only effect in BGP export policies and applies only to BGP routes created by exporting static routes with indirect next-hops. When the value of tRPOperPSDefActResolveStatic is true, the BGP next-hop is the resolved next-hop of the static route. When the value is false, the BGP next-hop is copied from the indirect next-hop." ::= { tRPOperPSDefActParamsExtEntry 30 } tRPOperPSDefActAdminTagPolicy OBJECT-TYPE SYNTAX TPolicyAdminTagPolicyOrVarName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActAdminTagPolicy indicates the administrative tag policy for the route. The tRPOperPSDefActAdminTagPolicy can be a string containing the administrative tag policy or a variable name that needs to be resolved to get the administrative tag policy. The internal colour value assigned to the tag is associated with the route. If one or more tags are specified in the policy in an include/exclude, then the internal colours associated with those tags are assigned to the include/exclude list. Set to empty string to disable." ::= { tRPOperPSDefActParamsExtEntry 31 } tRPOperPSDefActBgpMedSource OBJECT-TYPE SYNTAX TPolicyBgpMedSource MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpMedSource indicates the source to resolve to get the BGP MED value. When the value is 'igp', the BGP MED value is set to the IGP cost of the route or tunnel that resolves the BGP next-hop of the received BGP route. When the value is 'minIgp', the BGP MED value is set to the minimum IGP cost; i.e. if the cost of the resolving route or tunnel increases the advertised MED is not changed. When the value is 'medValue', the BGP MED value is set to the value of tRPOperPSDefActBgpMedValue. When the value is 'expression', the BGP MED value is set based on a calculation of the provided expression in tRPOperPSDefActBgpMedExpr." ::= { tRPOperPSDefActParamsExtEntry 32 } tRPOperPSDefActBgpMedValue OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpMedValue indicates the the BGP MED value. The value of this object can be a string containing the BGP MED value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP MED value. The value of this object is ignored when the object tRPOperPSDefActBgpMedSource has a value different from 'medValue'." ::= { tRPOperPSDefActParamsExtEntry 33 } tRPOperPSDefActBgpMedExpr OBJECT-TYPE SYNTAX TPolicyBgpMedExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpMedExpr indicates the expression that is used to calculate the BGP MED value. The value of this object is ignored when the object tRPOperPSDefActBgpMedSource has a value different from 'expression'." ::= { tRPOperPSDefActParamsExtEntry 34 } tRPOperPSDefActDisableRtInstall OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActDisableRtInstall indicates whether to disable the installation of a BGP route in the Routing Table and the Forwarding Information Base (FIB)." ::= { tRPOperPSDefActParamsExtEntry 35 } tRPOperPSDefActSrLabelIndex OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActSrLabelIndex indicates the the Segment Routing (SR) Label Index value. The value of this object can be a string containing the SR label Index value in the range [0..524287] or a variable name that needs to be resolved to get the SR Label Index." ::= { tRPOperPSDefActParamsExtEntry 36 } tRPOperPSDefActSrLblIndPrefIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActSrLblIndPrefIgp indicates whether it is preferred to use the SR Label Index from the IGP route. When the value is 'true', BGP will use the SR Label Index form the IGP route when present else it will use the value from tRPOperPSDefActSrLabelIndex. When the value is 'false', BGP will always use the tRPOperPSDefActSrLabelIndex. The value of this object is ignored when the object tRPOperPSDefActSrLabelIndex is empty." ::= { tRPOperPSDefActParamsExtEntry 37 } tRPOperPSDefActNextHopPeerAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActNextHopPeerAddr indicates whether the next-hop must be set to the peer address. This object cannot be 'true' when the other next-hop objects have a non-default value. When this object has a value of 'true' then tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPOperPSDefActNextHopSource and tRPOperPSDefActNextHopParam objects are disabled." ::= { tRPOperPSDefActParamsExtEntry 38 } tRPOperPSDefActBgpHighPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpHighPriority indicates whether the corresponding prefix must be marked in BGP as needing high priority treatment." ::= { tRPOperPSDefActParamsExtEntry 39 } tRPOperPSDefActFlexAlgo OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActFlexAlgo indicates the identifier of the Flexible Algorithm. The value of this object can be a string containing the Flex Algo Id value in the range [128..255] or a variable name that needs to be resolved to get the Flex Algo Id." ::= { tRPOperPSDefActParamsExtEntry 40 } tRPOperPSDefActBgpTunnelMetric OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpTunnelMetric indicates the the BGP Tunnel Metric value. The value of this object can be a string containing the BGP Tunnel Metric value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP Tunnel Metric." ::= { tRPOperPSDefActParamsExtEntry 41 } tRPOperPSDefActBgpTMetPrefAigp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActBgpTMetPrefAigp indicates whether it is preferred to use the value of the received AIGP attribute as BGP Tunnel Metric. If the value is 'true', the TTM metric is set to the value of the AIGP attribute if attached. If an AIGP metric is not attached or if the value is 'false', the tRPOperPSDefActBgpTunnelMetric is set as TTM metric. The value of this object is ignored if the object tRPOperPSDefActBgpTunnelMetric is empty." ::= { tRPOperPSDefActParamsExtEntry 42 } tRPOperPSDefActEgressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActEgressStats indicates whether to collect egress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." ::= { tRPOperPSDefActParamsExtEntry 43 } tRPOperPSDefActIngressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActIngressStats indicates whether to collect ingress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." ::= { tRPOperPSDefActParamsExtEntry 44 } tRPOperPSDefActSrMaintPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSDefActSrMaintPolicy indicates the named segment routing (SR) maintenance policy for SR policy routes. The maintenance policy must exist in TIMETRA-SR-POLICY-MIB::vRtrSrMainPlcyTable. The value of this object can be a string containing the maintenance policy or a variable name that needs to be resolved to get the maintenance policy. An empty string means that is disabled." ::= { tRPOperPSDefActParamsExtEntry 45 } tRPOperPfxListNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPfxListNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of operational prefix list names." ::= { tRPOperValueObjects 38 } tRPOperPfxListNameEntry OBJECT-TYPE SYNTAX TRPOperPfxListNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperPfxListNameTable represents information about a particular prefix list name. Entries are created and deleted by the user via tRPAdminPfxListNameTable. In case the prefix list is empty, i.e. no referring object tRPOperInetPrefixListName exists in the tRPOperInetPrefixListTable, the prefix list will never match." INDEX { tRPOperPfxListName } ::= { tRPOperPfxListNameTable 1 } TRPOperPfxListNameEntry ::= SEQUENCE { tRPOperPfxListName TPrefixListName, tRPOperPfxListNameRowStatus RowStatus, tRPOperPfxListNameCrOrigin TmnxCreateOrigin } tRPOperPfxListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPfxListName indicates the name of the prefix list entry." ::= { tRPOperPfxListNameEntry 1 } tRPOperPfxListNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPfxListNameTable." ::= { tRPOperPfxListNameEntry 2 } tRPOperPfxListNameCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPfxListNameCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperPfxListNameEntry 3 } tRPOperPSCondExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSCondExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of conditional expressions for a policy statement." ::= { tRPOperValueObjects 39 } tRPOperPSCondExprEntry OBJECT-TYPE SYNTAX TRPOperPSCondExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular conditional expression for a policy statement entry. The conditional expressions decides whether an entry should be evaluated. If the result of the conditional expression is 'TRUE' the entry is fully evaluated; if the result is 'FALSE' the entry is skipped and evaluations continues to the next entry or the default action is applied in case no next entry exists. Entries are created and deleted by creating and deleting entries in tRPAdminPSCondExprTable." INDEX { tRPOperPolicyStatementName, tRPOperPSNameEntryIndex } ::= { tRPOperPSCondExprTable 1 } TRPOperPSCondExprEntry ::= SEQUENCE { tRPOperPSCondExprRowStatus RowStatus, tRPOperPSCondExprRtExistString1 TPrefixListNameExpression } tRPOperPSCondExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSCondExprRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPSCondExprTable." ::= { tRPOperPSCondExprEntry 1 } tRPOperPSCondExprRtExistString1 OBJECT-TYPE SYNTAX TPrefixListNameExpression MAX-ACCESS read-only STATUS current DESCRIPTION "The value of object tRPOperPSCondExprRtExistString1 indicates an expression that contains a prefix list name and is used to test the route existence. The expression tests for the presence or absence of routes in the IP routing table that matches any of the entries in the prefix list. When tRPOperPSCondExprRtExistString1 contains an empty string there is no route existence test and the expression is automatically considered 'TRUE'." ::= { tRPOperPSCondExprEntry 2 } tRPOperASPathGroupNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperASPathGroupNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of operational AS-Path Group names." ::= { tRPOperValueObjects 40 } tRPOperASPathGroupNameEntry OBJECT-TYPE SYNTAX TRPOperASPathGroupNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperASPathGroupNameTable represents information about a particular AS-Path Group name. Entries are created and deleted by the user via tRPAdminASPathGroupNameTable. In case the AS-Path Group is empty, i.e. no referring object tRPOperASPathGroupName exists in the tRPOperASPathGroupTable, the AS-Path Group will never match." INDEX { tRPOperASPGroupName } ::= { tRPOperASPathGroupNameTable 1 } TRPOperASPathGroupNameEntry ::= SEQUENCE { tRPOperASPGroupName TASPathGroupName, tRPOperASPGroupNameRowStatus RowStatus, tRPOperASPGroupNameCrOrigin TmnxCreateOrigin } tRPOperASPGroupName OBJECT-TYPE SYNTAX TASPathGroupName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperASPGroupName indicates the name of the AS-Path Group entry." ::= { tRPOperASPathGroupNameEntry 1 } tRPOperASPGroupNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminASPathGroupNameTable." ::= { tRPOperASPathGroupNameEntry 2 } tRPOperASPGroupNameCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperASPGroupNameCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperASPathGroupNameEntry 3 } tRPOperCommunityNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperCommunityNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of operational community names." ::= { tRPOperValueObjects 41 } tRPOperCommunityNameEntry OBJECT-TYPE SYNTAX TRPOperCommunityNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperCommunityNameTable represents information about a particular community name. Entries are created and deleted by the user via tRPAdminCommunityNameTable. In case the community is empty, i.e. no referring object tRPOperCommunityName exists in the tRPOperCommunityTable, the community will never match." INDEX { tRPOperCommName } ::= { tRPOperCommunityNameTable 1 } TRPOperCommunityNameEntry ::= SEQUENCE { tRPOperCommName TLCommunityName, tRPOperCommNameRowStatus RowStatus, tRPOperCommNameCrOrigin TmnxCreateOrigin } tRPOperCommName OBJECT-TYPE SYNTAX TLCommunityName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperCommName indicates the name of the community entry." ::= { tRPOperCommunityNameEntry 1 } tRPOperCommNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "RowStatus for this row. To create or destroy entries in this table, use the tRPAdminCommunityNameTable." ::= { tRPOperCommunityNameEntry 2 } tRPOperCommNameCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperCommNameCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperCommunityNameEntry 3 } tRPOperGlobalVariableTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperGlobalVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information to resolve global variables used in policy." ::= { tRPOperValueObjects 42 } tRPOperGlobalVariableEntry OBJECT-TYPE SYNTAX TRPOperGlobalVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maps a global variable to a name which can be used in tRPOperPSFromCriteriaTable, tRPOperPSAcceptActionParamsTable, tRPOperPSDefaultActionParamsTable, tRPOperPSAcptActParamsExtTable or tRPOperPSDefActParamsExtTable entries. If a local variable with the same name exists in tRPOperPSPolicyVariableTable for the corresponding entry, the local variable is used to resolve the name." INDEX { tRPOperGlobalVarName } ::= { tRPOperGlobalVariableTable 1 } TRPOperGlobalVariableEntry ::= SEQUENCE { tRPOperGlobalVarName TPolicyVariableName, tRPOperGlobalVarRowStatus RowStatus, tRPOperGlobalVarType TPolicyVariableType, tRPOperGlobalVarString TNamedItemOrEmpty, tRPOperGlobalVarNumber Unsigned32, tRPOperGlobalVarAddressType InetAddressType, tRPOperGlobalVarAddress InetAddress, tRPOperGlobalVarDecimal TPolicyDecimal } tRPOperGlobalVarName OBJECT-TYPE SYNTAX TPolicyVariableName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperGlobalVarName specifies a variable name that can be used in the tRPOperPSFromCriteriaTable, tRPOperPSAcceptActionParamsTable, tRPOperPSDefaultActionParamsTable, tRPOperPSAcptActParamsExtTable or tRPOperPSDefActParamsExtTable." ::= { tRPOperGlobalVariableEntry 1 } tRPOperGlobalVarRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarRowStatus specifies the RowStatus for this row." ::= { tRPOperGlobalVariableEntry 2 } tRPOperGlobalVarType OBJECT-TYPE SYNTAX TPolicyVariableType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarType specifies how to resolve the tRPOperGlobalVarName. string(1) - indicates that tRPOperGlobalVarString is to be used integer(2) - indicates that tRPOperGlobalVarNumber is to be used address(3) - indicates that tRPOperGlobalVarAddressType and tRPOperGlobalVarAddress are to be used decimal(4) - indicates that tRPOperGlobalVarDecimal is to be used" ::= { tRPOperGlobalVariableEntry 3 } tRPOperGlobalVarString OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarString specifies e.g. the actual as-path name to which tRPOperGlobalVarName is resolved. This object tRPOperGlobalVarString is ignored when the object tRPOperGlobalVarType has a value different then string(1)." ::= { tRPOperGlobalVariableEntry 4 } tRPOperGlobalVarNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarNumber specifies e.g. the actual metric value to which tRPOperGlobalVarName is resolved. This object tRPOperGlobalVarNumber is ignored when the object tRPOperGlobalVarType has a value different then integer(2)." ::= { tRPOperGlobalVariableEntry 5 } tRPOperGlobalVarAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarAddressType specifies the actual IP address type of the tRPOperGlobalVarAddress to which tRPOperGlobalVarName is resolved. This object tRPOperGlobalVarAddressType is ignored when the object tRPOperGlobalVarType has a value different then address(3)." ::= { tRPOperGlobalVariableEntry 6 } tRPOperGlobalVarAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarAddress indicates e.g. the actual next-hop address to which tRPOperGlobalVarName is resolved. This object tRPOperGlobalVarAddress is ignored when the object tRPOperGlobalVarType has a value different from address(3)." ::= { tRPOperGlobalVariableEntry 7 } tRPOperGlobalVarDecimal OBJECT-TYPE SYNTAX TPolicyDecimal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperGlobalVarDecimal indicates the actual decimal value to which tRPOperGlobalVarName is resolved. This object tRPOperGlobalVarDecimal is ignored when the object tRPOperGlobalVarType has a value different then decimal(4)." ::= { tRPOperGlobalVariableEntry 8 } tRPOperPSToCritPfxListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSToCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix list names to match on as 'to' criteria for each policy statement entry." ::= { tRPOperValueObjects 43 } tRPOperPSToCritPfxListEntry OBJECT-TYPE SYNTAX TRPOperPSToCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry to prefix list criteria.. Entries are created or deleted when an entry in tRPOperPSToCriteriaTable is created or deleted." AUGMENTS { tRPOperPSToCriteriaEntry } ::= { tRPOperPSToCritPfxListTable 1 } TRPOperPSToCritPfxListEntry ::= SEQUENCE { tRPOperPSToCritPrefixList1 TPrefixListName, tRPOperPSToCritPrefixList2 TPrefixListName, tRPOperPSToCritPrefixList3 TPrefixListName, tRPOperPSToCritPrefixList4 TPrefixListName, tRPOperPSToCritPrefixList5 TPrefixListName, tRPOperPSToCritPrefixList6 TPrefixListName, tRPOperPSToCritPrefixList7 TPrefixListName, tRPOperPSToCritPrefixList8 TPrefixListName, tRPOperPSToCritPrefixList9 TPrefixListName, tRPOperPSToCritPrefixList10 TPrefixListName, tRPOperPSToCritPrefixList11 TPrefixListName, tRPOperPSToCritPrefixList12 TPrefixListName, tRPOperPSToCritPrefixList13 TPrefixListName, tRPOperPSToCritPrefixList14 TPrefixListName, tRPOperPSToCritPrefixList15 TPrefixListName, tRPOperPSToCritPrefixList16 TPrefixListName, tRPOperPSToCritPrefixList17 TPrefixListName, tRPOperPSToCritPrefixList18 TPrefixListName, tRPOperPSToCritPrefixList19 TPrefixListName, tRPOperPSToCritPrefixList20 TPrefixListName, tRPOperPSToCritPrefixList21 TPrefixListName, tRPOperPSToCritPrefixList22 TPrefixListName, tRPOperPSToCritPrefixList23 TPrefixListName, tRPOperPSToCritPrefixList24 TPrefixListName, tRPOperPSToCritPrefixList25 TPrefixListName, tRPOperPSToCritPrefixList26 TPrefixListName, tRPOperPSToCritPrefixList27 TPrefixListName, tRPOperPSToCritPrefixList28 TPrefixListName } tRPOperPSToCritPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList1 indicates the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 1 } tRPOperPSToCritPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList2 indicates the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 2 } tRPOperPSToCritPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList3 indicates the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 3 } tRPOperPSToCritPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList4 indicates the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 4 } tRPOperPSToCritPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList5 indicates the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 5 } tRPOperPSToCritPrefixList6 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList6 indicates the name of the sixth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 6 } tRPOperPSToCritPrefixList7 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList7 indicates the name of the seventh prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 7 } tRPOperPSToCritPrefixList8 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList8 indicates the name of the eight prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 8 } tRPOperPSToCritPrefixList9 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList9 indicates the name of the nineth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 9 } tRPOperPSToCritPrefixList10 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList10 indicates the name of the 10th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 10 } tRPOperPSToCritPrefixList11 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList11 indicates the name of the 11th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 11 } tRPOperPSToCritPrefixList12 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList12 indicates the name of the 12th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 12 } tRPOperPSToCritPrefixList13 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList13 indicates the name of the 13th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 13 } tRPOperPSToCritPrefixList14 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList14 indicates the name of the 14th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 14 } tRPOperPSToCritPrefixList15 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList15 indicates the name of the 15th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 15 } tRPOperPSToCritPrefixList16 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList16 indicates the name of the 16th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 16 } tRPOperPSToCritPrefixList17 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList17 indicates the name of the 17th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 17 } tRPOperPSToCritPrefixList18 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList18 indicates the name of the 18th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 18 } tRPOperPSToCritPrefixList19 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList19 indicates the name of the 19th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 19 } tRPOperPSToCritPrefixList20 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList20 indicates the name of the 20th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 20 } tRPOperPSToCritPrefixList21 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList21 indicates the name of the 21th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 21 } tRPOperPSToCritPrefixList22 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList22 indicates the name of the 22th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 22 } tRPOperPSToCritPrefixList23 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList23 indicates the name of the 23th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 23 } tRPOperPSToCritPrefixList24 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList24 indicates the name of the 24th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 24 } tRPOperPSToCritPrefixList25 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList25 indicates the name of the 25th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 25 } tRPOperPSToCritPrefixList26 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList26 indicates the name of the 26th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 26 } tRPOperPSToCritPrefixList27 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList27 indicates the name of the 27th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 27 } tRPOperPSToCritPrefixList28 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSToCritPrefixList28 indicates the name of the 28th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSToCritPfxListEntry 28 } tRPOperPSFromCritPfxListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPSFromCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix list names to match on as 'from' criteria for each policy statement entry" ::= { tRPOperValueObjects 44 } tRPOperPSFromCritPfxListEntry OBJECT-TYPE SYNTAX TRPOperPSFromCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry from prefix list criteria. Entries are created or deleted when an entry in tRPOperPSFromCriteriaTable is created or deleted." AUGMENTS { tRPOperPSFromCriteriaEntry } ::= { tRPOperPSFromCritPfxListTable 1 } TRPOperPSFromCritPfxListEntry ::= SEQUENCE { tRPOperPSFromCritPrefixList1 TPrefixListName, tRPOperPSFromCritPrefixList2 TPrefixListName, tRPOperPSFromCritPrefixList3 TPrefixListName, tRPOperPSFromCritPrefixList4 TPrefixListName, tRPOperPSFromCritPrefixList5 TPrefixListName, tRPOperPSFromCritPrefixList6 TPrefixListName, tRPOperPSFromCritPrefixList7 TPrefixListName, tRPOperPSFromCritPrefixList8 TPrefixListName, tRPOperPSFromCritPrefixList9 TPrefixListName, tRPOperPSFromCritPrefixList10 TPrefixListName, tRPOperPSFromCritPrefixList11 TPrefixListName, tRPOperPSFromCritPrefixList12 TPrefixListName, tRPOperPSFromCritPrefixList13 TPrefixListName, tRPOperPSFromCritPrefixList14 TPrefixListName, tRPOperPSFromCritPrefixList15 TPrefixListName, tRPOperPSFromCritPrefixList16 TPrefixListName, tRPOperPSFromCritPrefixList17 TPrefixListName, tRPOperPSFromCritPrefixList18 TPrefixListName, tRPOperPSFromCritPrefixList19 TPrefixListName, tRPOperPSFromCritPrefixList20 TPrefixListName, tRPOperPSFromCritPrefixList21 TPrefixListName, tRPOperPSFromCritPrefixList22 TPrefixListName, tRPOperPSFromCritPrefixList23 TPrefixListName, tRPOperPSFromCritPrefixList24 TPrefixListName, tRPOperPSFromCritPrefixList25 TPrefixListName, tRPOperPSFromCritPrefixList26 TPrefixListName, tRPOperPSFromCritPrefixList27 TPrefixListName, tRPOperPSFromCritPrefixList28 TPrefixListName } tRPOperPSFromCritPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList1 indicates the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 1 } tRPOperPSFromCritPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList2 indicates the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 2 } tRPOperPSFromCritPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList3 indicates the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 3 } tRPOperPSFromCritPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList4 indicates the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 4 } tRPOperPSFromCritPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList5 indicates the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 5 } tRPOperPSFromCritPrefixList6 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList6 indicates the name of the sixth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 6 } tRPOperPSFromCritPrefixList7 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList7 indicates the name of the seventh prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 7 } tRPOperPSFromCritPrefixList8 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList8 indicates the name of the eight prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 8 } tRPOperPSFromCritPrefixList9 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList9 indicates the name of the nineth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 9 } tRPOperPSFromCritPrefixList10 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList10 indicates the name of the 10th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 10 } tRPOperPSFromCritPrefixList11 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList11 indicates the name of the 11th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 11 } tRPOperPSFromCritPrefixList12 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList12 indicates the name of the 12th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 12 } tRPOperPSFromCritPrefixList13 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList13 indicates the name of the 13th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 13 } tRPOperPSFromCritPrefixList14 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList14 indicates the name of the 14th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 14 } tRPOperPSFromCritPrefixList15 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList15 indicates the name of the 15th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 15 } tRPOperPSFromCritPrefixList16 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList16 indicates the name of the 16th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 16 } tRPOperPSFromCritPrefixList17 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList17 indicates the name of the 17th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 17 } tRPOperPSFromCritPrefixList18 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList18 indicates the name of the 18th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 18 } tRPOperPSFromCritPrefixList19 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList19 indicates the name of the 19th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 19 } tRPOperPSFromCritPrefixList20 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList20 indicates the name of the 20th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 20 } tRPOperPSFromCritPrefixList21 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList21 indicates the name of the 21th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 21 } tRPOperPSFromCritPrefixList22 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList22 indicates the name of the 22th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 22 } tRPOperPSFromCritPrefixList23 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList23 indicates the name of the 23th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 23 } tRPOperPSFromCritPrefixList24 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList24 indicates the name of the 24th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 24 } tRPOperPSFromCritPrefixList25 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList25 indicates the name of the 25th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 25 } tRPOperPSFromCritPrefixList26 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList26 indicates the name of the 26th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 26 } tRPOperPSFromCritPrefixList27 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList27 indicates the name of the 27th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 27 } tRPOperPSFromCritPrefixList28 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tRPOperPSFromCritPrefixList28 indicates the name of the 28th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." ::= { tRPOperPSFromCritPfxListEntry 28 } tRPOperPfxListToTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPfxListToEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IPv4 and IPv6 admin prefix lists specifying a match condition from a start prefix/length to an end prefix/length." ::= { tRPOperValueObjects 45 } tRPOperPfxListToEntry OBJECT-TYPE SYNTAX TRPOperPfxListToEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperPfxListToEntry represents information about a particular prefix list to prefix. A route's prefix/length is considered a match if all of the following are true: - the start prefix-length most-significant bits of the route matches the start prefix - the end prefix-length most-significant bits of the route matches the end prefix - the prefix-length of the route is between start prefix-length and end prefix-length (inclusive). Entries are created and deleted by the user via tRPAdminPfxListToTable." INDEX { tRPOperPfxListName, tRPOperInetPrefixListPrefixType, tRPOperInetPrefixListPrefix, tRPOperInetPrefixListPrefixLen, tRPOperPfxListToEndPrefixType, tRPOperPfxListToEndPrefix, tRPOperPfxListToEndPrefixLen } ::= { tRPOperPfxListToTable 1 } TRPOperPfxListToEntry ::= SEQUENCE { tRPOperPfxListToEndPrefixType TmnxAddressAndPrefixType, tRPOperPfxListToEndPrefix TmnxAddressAndPrefixAddress, tRPOperPfxListToEndPrefixLen TmnxAddressAndPrefixPrefix, tRPOperPfxListToRowStatus RowStatus, tRPOperPfxListToCrOrigin TmnxCreateOrigin } tRPOperPfxListToEndPrefixType OBJECT-TYPE SYNTAX TmnxAddressAndPrefixType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPfxListToEndPrefixType specifies the address type of tRPOperPfxListToEndPrefix." ::= { tRPOperPfxListToEntry 1 } tRPOperPfxListToEndPrefix OBJECT-TYPE SYNTAX TmnxAddressAndPrefixAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPfxListToEndPrefix specifies the end IP prefix of the prefix list entry." ::= { tRPOperPfxListToEntry 2 } tRPOperPfxListToEndPrefixLen OBJECT-TYPE SYNTAX TmnxAddressAndPrefixPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPfxListToEndPrefixLen specifies the end IP prefix length of the prefix list entry." ::= { tRPOperPfxListToEntry 3 } tRPOperPfxListToRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPfxListToRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPfxListToTable." ::= { tRPOperPfxListToEntry 4 } tRPOperPfxListToCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPfxListToCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperPfxListToEntry 5 } tRPOperPfxListAddressMaskTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPOperPfxListAddressMaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of admin prefix lists specifying a match condition that does not require contiguous network mask bits." ::= { tRPOperValueObjects 46 } tRPOperPfxListAddressMaskEntry OBJECT-TYPE SYNTAX TRPOperPfxListAddressMaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPOperPfxListAddressMaskEntry represents information about a particular prefix list address mask. A route's prefix/length is considered a match if all of the following are true: - the bitwise logical AND of the prefix-list address and the mask equals the bitwise logical AND of the route address and the mask - the prefix length of the route matches the prefix length of the prefix-list entry Entries are created and deleted by the user via tRPAdminPfxListAddressMaskTable." INDEX { tRPOperPfxListName, tRPOperInetPrefixListPrefixType, tRPOperInetPrefixListPrefix, tRPOperInetPrefixListPrefixLen, tRPOperPfxListAddressMaskType, tRPOperPfxListAddressMask } ::= { tRPOperPfxListAddressMaskTable 1 } TRPOperPfxListAddressMaskEntry ::= SEQUENCE { tRPOperPfxListAddressMaskType InetAddressType, tRPOperPfxListAddressMask InetAddress, tRPOperPfxListAddrMaskRowStatus RowStatus, tRPOperPfxListAddrMaskCrOrigin TmnxCreateOrigin } tRPOperPfxListAddressMaskType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPfxListAddressMaskType specifies the address type of tRPOperPfxListAddressMask." ::= { tRPOperPfxListAddressMaskEntry 1 } tRPOperPfxListAddressMask OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPOperPfxListAddressMask specifies the address mask of the prefix list entry." ::= { tRPOperPfxListAddressMaskEntry 2 } tRPOperPfxListAddrMaskRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPfxListAddrMaskRowStatus indicates the RowStatus for this row. To create or destroy entries in this table, use the tRPAdminPfxListAddressMaskTable." ::= { tRPOperPfxListAddressMaskEntry 3 } tRPOperPfxListAddrMaskCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPOperPfxListAddrMaskCrOrigin indicates the mechanism used to create this entry." ::= { tRPOperPfxListAddressMaskEntry 4 } tRPAdminObjects OBJECT IDENTIFIER ::= { tRoutePolicyObjects 2 } tRPAdminControlObjects OBJECT IDENTIFIER ::= { tRPAdminObjects 1 } tRPAdminOwner OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "Who has last initialized the administrative tables, who is making all the changes, and who is expected to either commit or re-initialize (ABORT-TRANSACTION). The value of tRPAdminOwner is set when tRPAdminControlApply is set so that other users will be advised to not make changes to the Admin tables. Agent sets tRPAdminOwner to empty string after tRPAdminControlApply is set - either by user initializing or committing, or by agent timing out the uncommitted transactions (tRPAdminLastSetTimer)." ::= { tRPAdminControlObjects 1 } tRPAdminControlApply OBJECT-TYPE SYNTAX INTEGER { none (1), initialize (2), commit (3), exclusive (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the use of tRPAdminValueObjects tables. This object always reads none(1) after setting it to commit(3). When set to initialize(2), the objects in tRPAdminValueObjects tables are set to the current Operational values, from the corresponding tRPOperValueObjects tables. Any uncommitted changes are lost, so setting this value corresponds to both BEGIN-TRANSACTION and ABORT-TRANSACTION. The value of this object must be initialize(2) when changing the values of objects in tRPAdminValueObjects tables. When set to commit(3) (END-TRANSACTION), all of the objects from tRPAdminValueObjects tables are copied to the corresponding tRPOperValueObjects table objects. Then, all routes are re-evaluated with the new policies. Later arriving routes are evaluated with the new policies. Value exclusive(4) initializes the transaction like initialize(2), but when the value is set to exclusive(4), only the user who started this transaction (tRPAdminOwner) can change the configuration. In this way, the (expensive) route re-evaluation can be performed at one time, with a coherent route policy configuration." ::= { tRPAdminControlObjects 2 } tRPAdminLastSetTimer OBJECT-TYPE SYNTAX TimeInterval UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time remaining until the agent re-initializes the administrative tables. If tRPAdminControlApply is currently set to exclusive(4) and is not set to commit(3) within tRPAdminLastSetTimer centiseconds, the agent will set it to none(1) and all uncommitted changes will be lost. This way, uncommitted changes from failed (uncompleted) change sets will eventually be removed, and another transaction can safely begin. This object is reset to tRPAdminLastSetTimeout after GET or SET operation to any of the tRPAdminValueObjects tables by the current owner of the exclusive lock." ::= { tRPAdminControlObjects 3 } tRPAdminLastSetTimeout OBJECT-TYPE SYNTAX Integer32 (1..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tRPAdminLastSetTimeout specifies the timeout interval for transactions started with an exclusive lock." DEFVAL { 300 } ::= { tRPAdminControlObjects 4 } tRPAdminControlResetExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This value of object tRPAdminControlResetExclusive specifies whether the exclusive lock should be aborted. When the value of tRPAdminControlResetExclusive is set to true(1), the exclusive lock, taken by setting tRPAdminControlApply to exclusive(4), is aborted. This corresponds with ABORT-TRANSACTION." DEFVAL { false } ::= { tRPAdminControlObjects 5 } tRPAdminValueObjects OBJECT IDENTIFIER ::= { tRPAdminObjects 2 } tRPAdminASPathTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of AS Path names and corresponding regular expressions." ::= { tRPAdminValueObjects 1 } tRPAdminASPathEntry OBJECT-TYPE SYNTAX TRPAdminASPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular AS Path Name. Entries are created and deleted by the user." INDEX { tRPAdminASPathName } ::= { tRPAdminASPathTable 1 } TRPAdminASPathEntry ::= SEQUENCE { tRPAdminASPathName TASPathName, tRPAdminASPathRowStatus RowStatus, tRPAdminASPathRegEx TRoutePolicyRegex, tRPAdminASPathCreationOrigin TmnxCreateOrigin } tRPAdminASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the AS Path entry used to uniquely identify an AS Path." ::= { tRPAdminASPathEntry 1 } tRPAdminASPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminASPathRowStatus specifies the RowStatus for this row. To create a row, set this object to createAndGo(4). The value of tRPAdminASPathRegEx must also be set to a valid non-empty string for the row creation to succeed. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperASPathTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperASPathTable." ::= { tRPAdminASPathEntry 2 } tRPAdminASPathRegEx OBJECT-TYPE SYNTAX TRoutePolicyRegex MAX-ACCESS read-create STATUS current DESCRIPTION "The regular expression for the AS Path entry." DEFVAL { ''H } ::= { tRPAdminASPathEntry 3 } tRPAdminASPathCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminASPathCreationOrigin indicates the mechanism used to create this entry." ::= { tRPAdminASPathEntry 4 } tRPAdminCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPAdminValueObjects 2 } tRPAdminCommunityEntry OBJECT-TYPE SYNTAX TRPAdminCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community name member. Entries are created and deleted by the user. When a community entry is created with a name that doesn't exist in the tRPAdminCommunityNameTable, a corresponding entry will be created automatically in tRPAdminCommunityNameTable. When a corresponding entry is deleted from tRPAdminCommunityNameTable, the entry in this table will be deleted automatically." INDEX { tRPAdminCommunityName, tRPAdminCommunityMember } ::= { tRPAdminCommunityTable 1 } TRPAdminCommunityEntry ::= SEQUENCE { tRPAdminCommunityName TLCommunityName, tRPAdminCommunityMember TCommunityMember, tRPAdminCommunityRowStatus RowStatus, tRPAdminCommunityCreationOrigin TmnxCreateOrigin } tRPAdminCommunityName OBJECT-TYPE SYNTAX TLCommunityName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the community used as an index for this table. This object refers to the object tRPAdminCommName in tRPAdminCommunityNameTable." ::= { tRPAdminCommunityEntry 1 } tRPAdminCommunityMember OBJECT-TYPE SYNTAX TCommunityMember MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AS Number or Community ID of the community member. The community name and the member name uniquely identify a row in this table." ::= { tRPAdminCommunityEntry 2 } tRPAdminCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminCommunityRowStatus specifies the RowStatus for this row. To create a row, set this object to createAndGo(4). When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperCommunityTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperCommunityTable." ::= { tRPAdminCommunityEntry 3 } tRPAdminCommunityCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminCommunityCreationOrigin indicates the mechanism used to create this entry." ::= { tRPAdminCommunityEntry 4 } tRPAdminDampingTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of route damping control entries." ::= { tRPAdminValueObjects 3 } tRPAdminDampingEntry OBJECT-TYPE SYNTAX TRPAdminDampingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular Damping entry. Entries are created and deleted by the user." INDEX { tRPAdminDampingName } ::= { tRPAdminDampingTable 1 } TRPAdminDampingEntry ::= SEQUENCE { tRPAdminDampingName TDampingName, tRPAdminDampingRowStatus RowStatus, tRPAdminDampingHalfLife Unsigned32, tRPAdminDampingMaxSuppress Unsigned32, tRPAdminDampingReuse Unsigned32, tRPAdminDampingSuppress Unsigned32, tRPAdminDampingCreationOrigin TmnxCreateOrigin } tRPAdminDampingName OBJECT-TYPE SYNTAX TDampingName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the damping entry used to uniquely identify a row in this table." ::= { tRPAdminDampingEntry 1 } tRPAdminDampingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminDampingRowStatus specifies the RowStatus for this row. To create a row, set this object to createAndGo(4). When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperDampingTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperDampingTable." ::= { tRPAdminDampingEntry 2 } tRPAdminDampingHalfLife OBJECT-TYPE SYNTAX Unsigned32 (0..45) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the half-life, in minutes, for a routes figure-of-merit after it has been dampened. If a route's half-life is set to 15 minutes and has a figure-of-merit of 1500, after 15 minutes, the route's figure-of-merit will have decayed to 750. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 3 } tRPAdminDampingMaxSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..720) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the maximum amount of time, in minutes, that a route can be suppressed for. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 4 } tRPAdminDampingReuse OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the reuse threshold. If a route's figure-of-merit falls below the reuse threshold, the route can be reused. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 5 } tRPAdminDampingSuppress OBJECT-TYPE SYNTAX Unsigned32 (0..20000) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the suppress threshold. If a route's figure-of-merit goes above the suppress threshold, the route should be suppressed. Set to 0 to disable." DEFVAL { 0 } ::= { tRPAdminDampingEntry 6 } tRPAdminDampingCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminDampingCreationOrigin indicates the mechanism used to create this entry." ::= { tRPAdminDampingEntry 7 } tRPAdminPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix lists." ::= { tRPAdminValueObjects 4 } tRPAdminPrefixListEntry OBJECT-TYPE SYNTAX TRPAdminPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular prefix list. Entries are created and deleted by the user. When a prefix list entry is created with a name that doesn't exist in the tRPAdminPfxListNameTable, a corresponding entry will be created automatically in tRPAdminPfxListNameTable. When a corresponding entry is deleted from tRPAdminPfxListNameTable, the entry in this table will be deleted automatically." INDEX { tRPAdminPrefixListName, tRPAdminPrefixListIpPrefix, tRPAdminPrefixListMask, tRPAdminPrefixListType } ::= { tRPAdminPrefixListTable 1 } TRPAdminPrefixListEntry ::= SEQUENCE { tRPAdminPrefixListName TPrefixListName, tRPAdminPrefixListIpPrefix IpAddress, tRPAdminPrefixListMask IpAddressPrefixLength, tRPAdminPrefixListRowStatus RowStatus, tRPAdminPrefixListType INTEGER, tRPAdminPrefixListThroughLength IpAddressPrefixLength, tRPAdminPrefixListBeginLength IpAddressPrefixLength } tRPAdminPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the prefix list entry." ::= { tRPAdminPrefixListEntry 1 } tRPAdminPrefixListIpPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP prefix of the prefix list entry." ::= { tRPAdminPrefixListEntry 2 } tRPAdminPrefixListMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP mask length of the prefix list entry." ::= { tRPAdminPrefixListEntry 3 } tRPAdminPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPrefixListTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPrefixListTable." ::= { tRPAdminPrefixListEntry 4 } tRPAdminPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact (1), longer (2), through (3), range (4), to (5), addressMask (6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPAdminPrefixListBeginLength and less than or equal to the length defined by tRPAdminPrefixListThroughLength in order for an entry to be considered a match. to (5) - a route's prefix/length must match the condition from a start prefix/length to an end prefix/length. The end prefix/length is indicated in the corresponding entry in the tRPAdminPfxListToTable. addressMask (6) - a route's prefix/length must match the prefix length of the prefix-list entry and the bitwise logical AND of the route address and the mask must match the bitwise logical AND from the prefix-list address and the mask. The address mask must be specified in a corresponding entry in the tRPAdminPfxListAddressMaskTable." ::= { tRPAdminPrefixListEntry 5 } tRPAdminPrefixListThroughLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "When tRPAdminPrefixListType set to through(3), the mask length to use. Must be larger than tRPAdminPrefixListMask." DEFVAL { 0 } ::= { tRPAdminPrefixListEntry 6 } tRPAdminPrefixListBeginLength OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "When tRPAdminPrefixListType set to range(4), the mask length to use as the lower limit for the mask range. Must be larger than tRPAdminPrefixListMask and less than tRPAdminPrefixListThroughLength." DEFVAL { 0 } ::= { tRPAdminPrefixListEntry 8 } tRPAdminPolicyStatementTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Control table for policy statements." ::= { tRPAdminValueObjects 5 } tRPAdminPolicyStatementEntry OBJECT-TYPE SYNTAX TRPAdminPolicyStatementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy statement. Entries are created and deleted by the user." INDEX { tRPAdminPolicyStatementName } ::= { tRPAdminPolicyStatementTable 1 } TRPAdminPolicyStatementEntry ::= SEQUENCE { tRPAdminPolicyStatementName TLPolicyStatementName, tRPAdminPolicyStatementRowStatus RowStatus, tRPAdminPolicyStatementDescription TItemDescription, tRPAdminPolicyStatementDefaultAction TPolicyEntryAction, tRPAdminPolicyStatementCrOrigin TmnxCreateOrigin } tRPAdminPolicyStatementName OBJECT-TYPE SYNTAX TLPolicyStatementName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of this policy statement that uniquely identifies an entry in this table." ::= { tRPAdminPolicyStatementEntry 1 } tRPAdminPolicyStatementRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPolicyStatementRowStatus specifies the RowStatus for this row. To create a row, set this object to createAndGo(4). When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPolicyStatementTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPolicyStatementTable." ::= { tRPAdminPolicyStatementEntry 2 } tRPAdminPolicyStatementDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "Description for this policy statement." DEFVAL { ''H } ::= { tRPAdminPolicyStatementEntry 3 } tRPAdminPolicyStatementDefaultAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-create STATUS current DESCRIPTION "The default action for the policy statement specifies what happens to the route if none of the policy statement entries match." DEFVAL { reject } ::= { tRPAdminPolicyStatementEntry 4 } tRPAdminPolicyStatementCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPolicyStatementCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminPolicyStatementEntry 5 } tRPAdminPSDefaultActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action parameters for a policy statement." ::= { tRPAdminValueObjects 6 } tRPAdminPSDefaultActionParamsEntry OBJECT-TYPE SYNTAX TRPAdminPSDefaultActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. When tRPAdminPolicyStatementDefaultAction for the policy statement is 'accept(1)', and no policy statement entry matches the route, the following default actions are applied to the route. Entries are created when tRPAdminPolicyStatementDefaultAction is set to 'accept(1)', 'reject(2)', 'continue(3)' or 'nextPolicy(4)'. Entries are deleted when a policy statement is destroyed or tRPAdminPolicyStatementDefaultAction is set to value 'none(0)'." INDEX { tRPAdminPolicyStatementName } ::= { tRPAdminPSDefaultActionParamsTable 1 } TRPAdminPSDefaultActionParamsEntry ::= SEQUENCE { tRPAdminPSDefaultActionASPath TPolicyEntryEdit, tRPAdminPSDefaultActionASPathName TASPathName, tRPAdminPSDefaultActionASPathPrependAS TmnxBgpAutonomousSystem, tRPAdminPSDefaultActionASPathPrependCount Integer32, tRPAdminPSDefaultActionCommunity1 TPolicyEntryEdit, tRPAdminPSDefaultActionCommunityName1 TCommunityName, tRPAdminPSDefaultActionCommunity2 TPolicyEntryEdit, tRPAdminPSDefaultActionCommunityName2 TCommunityName, tRPAdminPSDefaultActionOrigin TPolicyEntryCriteriaOrigin, tRPAdminPSDefaultActionLocalPreferenceSet TruthValue, tRPAdminPSDefaultActionLocalPreference TmnxBgpLocalPreference, tRPAdminPSDefaultActionMetric TPolicyEntryEdit, tRPAdminPSDefaultActionMetricValue Unsigned32, tRPAdminPSDefaultActionPreference TmnxBgpPreference, tRPAdminPSDefaultActionDamping TDampingName, tRPAdminPSDefaultActionNextHopSelf TruthValue, tRPAdminPSDefaultActionNextHop IpAddress, tRPAdminPSDefaultActionTag TPolicyActionTag, tRPAdminPSDefaultActionOspfType TOspfRouteType, tRPAdminPSDefActInetNextHopType InetAddressType, tRPAdminPSDefActInetNextHop InetAddress, tRPAdminPSDefaultActionASPathPnd InetAutonomousSystemNumber, tRPAdminPSDefActMcRedirSvcId TmnxServId, tRPAdminPSDefActMcRedirIfIndex InterfaceIndexOrZero, tRPAdminPSDefActionMetricSource TPolicyActionMetricSource, tRPAdminPSDefActionAigpMetric TPolicyEntryAigpMetricEdit, tRPAdminPSDefActnAigpMetricVal Unsigned32, tRPAdminPSDefActnSrcClassIndex ClassIndexOrNone, tRPAdminPSDefActnDstClassIndex ClassIndexOrNone, tRPAdminPSDefActnOrigValidState INTEGER } tRPAdminPSDefaultActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionASPath specifies the AS Path rewrite information for the route. This object must be set together with tRPAdminPSDefaultActionASPathName." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 1 } tRPAdminPSDefaultActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionASPathName specifies the AS Path name to use for add, remove, or replace operation specified by tRPAdminPSDefaultActionASPath. This object must be set together with tRPAdminPSDefaultActionASPath and is ignored when tRPAdminPSDefaultActionASPath is none(1)." DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 2 } tRPAdminPSDefaultActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPAdminPSDefaultActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPAdminPSDefaultActionASPathPnd." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 3 } tRPAdminPSDefaultActionASPathPrependCount OBJECT-TYPE SYNTAX Integer32 (0..50) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of times tRPAdminPSDefaultActionASPathPnd is prepended to the AS-Path attribute of the route. Set to zero to disable. The value of this object tRPAdminPSDefaultActionASPathPrependCount is ignored when the object tRPAdminPSDefActASPPendCountSrc has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 4 } tRPAdminPSDefaultActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS obsolete DESCRIPTION "How to apply tRPAdminPSDefaultActionCommunityName1 to the communities for the route. Set to none(1) to disable this feature. This object is obsoleted in release 11.0. It is replaced by tRPAdminPSDefActionAddCommEntry, tRPAdminPSDefActionRemCommEntry, and tRPAdminPSDefActionRepCommEntry." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 5 } tRPAdminPSDefaultActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPAdminPSDefaultActionCommunity1 is none(1). This object is obsoleted in release 11.0. It is replaced by tRPAdminPSDefActionAddCommEntry, tRPAdminPSDefActionRemCommEntry, and tRPAdminPSDefActionRepCommEntry." DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 6 } tRPAdminPSDefaultActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS obsolete DESCRIPTION "How to apply tRPAdminPSDefaultActionCommunityName2 to the communities for the route. Set to none(1) to disable this feature. This object is obsoleted in release 11.0. It is replaced by tRPAdminPSDefActionAddCommEntry, tRPAdminPSDefActionRemCommEntry, and tRPAdminPSDefActionRepCommEntry." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 7 } tRPAdminPSDefaultActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Community name to add, remove, or replace, to any existing community for the route. Ignored when tRPAdminPSDefaultActionCommunity2 is none(1). This object is obsoleted in release 11.0. It is replaced by tRPAdminPSDefActionAddCommEntry, tRPAdminPSDefActionRemCommEntry, and tRPAdminPSDefActionRepCommEntry." DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 8 } tRPAdminPSDefaultActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionOrigin specifies the origin of the route exported into BGP if it does not match an entry. The value of this object tRPAdminPSDefaultActionOrigin is ignored when the object tRPAdminPSDefActOriginSource has a value different from actionValue(1)." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 9 } tRPAdminPSDefaultActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true(1), use the value of tRPAdminPSDefaultActionLocalPreference for local preference. When the value of tRPAdminPSDefActLocalPrefSource has a value different from actionValue(1), the value of tRPAdminPSDefaultActionLocalPreferenceSet and tRPAdminPSDefActLocalPrefSource are ignored." DEFVAL { false } ::= { tRPAdminPSDefaultActionParamsEntry 10 } tRPAdminPSDefaultActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Local preference to apply to the route. Set tRPAdminPSDefaultActionLocalPreferenceSet to false(2) to disable. The value of this object tRPAdminPSDefaultActionLocalPreference is ignored when the object tRPAdminPSDefActLocalPrefSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 11 } tRPAdminPSDefaultActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "Action for tRPAdminPSDefaultActionMetricValue or the metric value resolved from tRPAdminPSDefActMetricParam depending on the tRPAdminPSDefActionMetricSource." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 12 } tRPAdminPSDefaultActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Add, subtract, or set metric value. Ignored when tRPAdminPSDefaultActionMetric is none(1). The value of this object tRPAdminPSDefaultActionMetricValue is ignored when the object tRPAdminPSDefActionMetricSource is set to a value different from metricVal(2)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 13 } tRPAdminPSDefaultActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Preference to apply to the route. The value of this object tRPAdminPSDefaultActionPreference is ignored when the object tRPAdminPSDefActPreferenceSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 15 } tRPAdminPSDefaultActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-create STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSDefaultActionParamsEntry 16 } tRPAdminPSDefaultActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionNextHopSelf specifies the next-hop-self on the route. Next-hop-self cannot be set to 'true' at the same time as setting the other next-hop objects to a non-default value. Setting this object to 'true' will reset tRPAdminPSDefActNextHopPeerAddr, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop, tRPAdminPSDefActNextHopSource and tRPAdminPSDefActNextHopParam." DEFVAL { false } ::= { tRPAdminPSDefaultActionParamsEntry 17 } tRPAdminPSDefaultActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionNextHop indicates the next-hop IPv4 address in the route. The object is disabled if it holds the value 255.255.255.255. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self or peer-address to 'true'. Setting this object to a valid IP address will reset tRPAdminPSDefaultActionNextHopSelf and tRPAdminPSDefActNextHopPeerAddr to 'false'. This object is the same as tRPAdminPSDefActInetNextHop when a valid IPv4 address is set. Please use tRPAdminPSDefActInetNextHop, tRPAdminPSDefActInetNextHop, tRPAdminPSDefActNextHopSource and tRPAdminPSDefActNextHopParam for extended next-hop address support." DEFVAL { 'FFFFFFFF'H } ::= { tRPAdminPSDefaultActionParamsEntry 18 } tRPAdminPSDefaultActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionTag specifies the tag for the route. A value of 0 for tRPAdminPSDefaultActionTag specifies that tagging is disabled. The value of this object tRPAdminPSDefaultActionTag is ignored when the object tRPAdminPSDefActTagSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 19 } tRPAdminPSDefaultActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF route type for the route. The value of this object tRPAdminPSDefaultActionOspfType is ignored when the object tRPAdminPSDefActOspfTypeSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 20 } tRPAdminPSDefActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActInetNextHopType specifies the type of tRPAdminPSDefActInetNextHop address, as defined in the InetAddress MIB. The value of this object tRPAdminPSDefActInetNextHopType and tRPAdminPSDefActInetNextHop are ignored when the object tRPAdminPSDefActNextHopSource has a value different then actionValue(1)." ::= { tRPAdminPSDefaultActionParamsEntry 21 } tRPAdminPSDefActInetNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActInetNextHop specifies the next-hop IP address in the route. To disable, tRPAdminPSDefActInetNextHopType should be set to 'ipv6' and tRPAdminPSDefActInetNextHop should be set to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of tRPAdminPSDefActInetNextHopType object. Next-hop cannot be set to a valid IP address at the same time as setting the next-hop-self or peer-address to 'true'. Setting this object to a valid IP address will reset tRPAdminPSDefaultActionNextHopSelf and tRPAdminPSDefActNextHopPeerAddr to 'false'. tRPAdminPSDefActInetNextHop object replaces tRPAdminPSDefaultActionNextHop that supports only IPv4 address style next-hop. The value of this object tRPAdminPSDefActInetNextHop is ignored when the object tRPAdminPSDefActNextHopSource has a value different from actionValue(1)." ::= { tRPAdminPSDefaultActionParamsEntry 22 } tRPAdminPSDefaultActionASPathPnd OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefaultActionASPathPnd specifies the AS Number to prepend to the AS-Path attribute of the route. The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPAdminPSDefaultActionASPathPrependCount is zero and tRPAdminPSDefActASPPendCountSrc is set to actionValue(1). The value of this object tRPAdminPSDefaultActionASPathPnd is ignored when the object tRPAdminPSDefActASPathPendSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 23 } tRPAdminPSDefActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActMcRedirSvcId specifies the service ID of the service where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 30 } tRPAdminPSDefActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActMcRedirIfIndex specifies the interface index of the interface where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 31 } tRPAdminPSDefActionMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionMetricSource specifies the source of the default action metric. This object should only be set to igpCost(1) when the object tRPAdminPSDefaultActionMetric is set to replace(4). When the value of tRPAdminPSDefActionMetricSource is set to 'igpCost(1)', the value of tRPAdminPSDefaultActionMetricValue and tRPAdminPSDefActMetricParam are ignored; and the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route. The default value of tRPAdminPSDefActionMetricSource is 'metricVal(2)' which means the metric value is the value of tRPAdminPSDefaultActionMetricValue. The value of the object tRPAdminPSDefActMetricParam is ignored. The value 'metricParam(3) means the metric value is derived from the object tRPAdminPSDefActMetricParam; the value of the object tRPAdminPSDefaultActionMetricValue is ignored." DEFVAL { metricVal } ::= { tRPAdminPSDefaultActionParamsEntry 32 } tRPAdminPSDefActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAigpMetric specifies the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. The value of tRPAdminPSDefActionAigpMetric decides how to apply tRPAdminPSDefActnAigpMetricVal to the route. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActnAigpMetricVal, tRPAdminPSDefActAigpMetricSource and tRPAdminPSDefActAigpMetricParam are ignored." DEFVAL { none } ::= { tRPAdminPSDefaultActionParamsEntry 33 } tRPAdminPSDefActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActnAigpMetricVal specifies the value to add or set for the route AIGP(Accumulated IGP) metric. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActnAigpMetricVal is ignored. The value of this object tRPAdminPSDefActnAigpMetricVal is ignored when the object tRPAdminPSDefActAigpMetricSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 34 } tRPAdminPSDefActnSrcClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActnSrcClassIndex specifies the default admin source-class for this policy statement. A value of 0 means no source-class." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 35 } tRPAdminPSDefActnDstClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActnDstClassIndex specifies the default admin dest-class for this policy statement. A value of 0 means no dest-class." DEFVAL { 0 } ::= { tRPAdminPSDefaultActionParamsEntry 36 } tRPAdminPSDefActnOrigValidState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), valid (1), notFound (2), invalid (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActnOrigValidState specifies the default origin validation state for this policy statement. The value of this object tRPAdminPSDefActnOrigValidState is ignored when the object tRPAdminPSDefActOrigValStateSrc has a value different from actionValue(1)." DEFVAL { notApplicable } ::= { tRPAdminPSDefaultActionParamsEntry 37 } tRPAdminPSParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entries." ::= { tRPAdminValueObjects 7 } tRPAdminPSParamsEntry OBJECT-TYPE SYNTAX TRPAdminPSParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular policy statement entry. Entries are created and deleted by the user." INDEX { tRPAdminPolicyStatementName, tRPAdminPSNameEntryIndex } ::= { tRPAdminPSParamsTable 1 } TRPAdminPSParamsEntry ::= SEQUENCE { tRPAdminPSNameEntryIndex TPolicyStatementEntryID, tRPAdminPSParamsRowStatus RowStatus, tRPAdminPSParamsDescription TItemDescription, tRPAdminPSParamsAction TPolicyEntryAction, tRPAdminPSParamsCreationOrigin TmnxCreateOrigin } tRPAdminPSNameEntryIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ID of this policy statement entry." ::= { tRPAdminPSParamsEntry 1 } tRPAdminPSParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSParamsRowStatus specifies the RowStatus for this row. To Create a row, set this object to createAndGo(4). When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSParamsTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSParamsTable." ::= { tRPAdminPSParamsEntry 2 } tRPAdminPSParamsDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "Description for this policy statement entry." DEFVAL { ''H } ::= { tRPAdminPSParamsEntry 3 } tRPAdminPSParamsAction OBJECT-TYPE SYNTAX TPolicyEntryAction MAX-ACCESS read-create STATUS current DESCRIPTION "The action to take when a route matches this policy statement entry's to or from criteria." ::= { tRPAdminPSParamsEntry 4 } tRPAdminPSParamsCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPSParamsCreationOrigin indicates the mechanism used to create this entry." ::= { tRPAdminPSParamsEntry 5 } tRPAdminPSAcceptActionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action parameters for a policy statement." ::= { tRPAdminValueObjects 8 } tRPAdminPSAcceptActionParamsEntry OBJECT-TYPE SYNTAX TRPAdminPSAcceptActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information for a particular policy statement entry. Entries are created when tRPAdminPSParamsAction is set to 'accept(1)', 'reject(2)', 'continue(3)' or 'nextPolicy(4)'. Entries are deleted when a policy statement is destroyed or tRPAdminPSParamsAction is set to value 'none(0)'." INDEX { tRPAdminPolicyStatementName, tRPAdminPSNameEntryIndex } ::= { tRPAdminPSAcceptActionParamsTable 1 } TRPAdminPSAcceptActionParamsEntry ::= SEQUENCE { tRPAdminPSAcceptActionASPath TPolicyEntryEdit, tRPAdminPSAcceptActionASPathName TASPathName, tRPAdminPSAcceptActionASPathPrependAS TmnxBgpAutonomousSystem, tRPAdminPSAcceptActionASPathPrependCount Integer32, tRPAdminPSAcceptActionCommunity1 TPolicyEntryEdit, tRPAdminPSAcceptActionCommunityName1 TCommunityName, tRPAdminPSAcceptActionCommunity2 TPolicyEntryEdit, tRPAdminPSAcceptActionCommunityName2 TCommunityName, tRPAdminPSAcceptActionOrigin TPolicyEntryCriteriaOrigin, tRPAdminPSAcceptActionLocalPreferenceSet TruthValue, tRPAdminPSAcceptActionLocalPreference TmnxBgpLocalPreference, tRPAdminPSAcceptActionMetric TPolicyEntryEdit, tRPAdminPSAcceptActionMetricValue Unsigned32, tRPAdminPSAcceptActionPreference TmnxBgpPreference, tRPAdminPSAcceptActionDamping TDampingName, tRPAdminPSAcceptActionNextHopSelf TruthValue, tRPAdminPSAcceptActionNextHop IpAddress, tRPAdminPSAcceptActionTag TPolicyActionTag, tRPAdminPSAcceptActionOspfType TOspfRouteType, tRPAdminPSAcptActInetNextHopType InetAddressType, tRPAdminPSAcptActInetNextHop InetAddress, tRPAdminPSAcceptActionASPathPend InetAutonomousSystemNumber, tRPAdminPSAcceptActionFC TNamedItemOrEmpty, tRPAdminPSAcceptActionFCPriority TPriorityOrUndefined, tRPAdminPSAcptActMcRedirSvcId TmnxServId, tRPAdminPSAcptActMcRedirIfIndex InterfaceIndexOrZero, tRPAdminPSAcptActnMetricSource TPolicyActionMetricSource, tRPAdminPSAcptActionAigpMetric TPolicyEntryAigpMetricEdit, tRPAdminPSAcptActnAigpMetricVal Unsigned32, tRPAdminPSAcptActnSrcClassIndex ClassIndexOrNone, tRPAdminPSAcptActnDstClassIndex ClassIndexOrNone, tRPAdminPSAcptActnOrigValidState INTEGER } tRPAdminPSAcceptActionASPath OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The AS Path rewrite information for the route." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 1 } tRPAdminPSAcceptActionASPathName OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-create STATUS current DESCRIPTION "AS Path Name to add, remove, or replace. Ignored when tRPAdminPSAcceptActionASPath is none(1)" DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 2 } tRPAdminPSAcceptActionASPathPrependAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "AS Number to prepend to the AS-Path attribute of the route. Ignored when tRPAdminPSAcceptActionASPathPrependCount is zero. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by tRPAdminPSAcceptActionASPathPend." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 3 } tRPAdminPSAcceptActionASPathPrependCount OBJECT-TYPE SYNTAX Integer32 (0..50) MAX-ACCESS read-create STATUS current DESCRIPTION "Number of times to prepend tRPAdminPSAcceptActionASPathPend to the route. Set to zero to disable this feature. The value of this object tRPAdminPSAcceptActionASPathPrependCount is ignored when the object tRPAdminPSAcptActASPPendCountSrc has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 4 } tRPAdminPSAcceptActionCommunity1 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS obsolete DESCRIPTION "How to apply tRPAdminPSAcceptActionCommunityName1 to the route. This object is obsoleted in release 11.0. It is replaced by tRPAdminPSAccActionAddCommEntry, tRPAdminPSAccActionRemCommEntry, and tRPAdminPSAccActionRepCommEntry." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 5 } tRPAdminPSAcceptActionCommunityName1 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Community to apply to the route. Ignored when tRPAdminPSAcceptActionCommunity1 is set to none(1). This object is obsoleted in release 11.0. It is replaced by tRPAdminPSAccActionAddCommEntry, tRPAdminPSAccActionRemCommEntry, and tRPAdminPSAccActionRepCommEntry." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 6 } tRPAdminPSAcceptActionCommunity2 OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS obsolete DESCRIPTION "How to apply tRPAdminPSAcceptActionCommunityName2 to the route. This object is obsoleted in release 11.0. It is replaced by tRPAdminPSAccActionAddCommEntry, tRPAdminPSAccActionRemCommEntry, and tRPAdminPSAccActionRepCommEntry." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 7 } tRPAdminPSAcceptActionCommunityName2 OBJECT-TYPE SYNTAX TCommunityName MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Community to apply to the route. Ignored when tRPAdminPSAcceptActionCommunity2 is set to none(1). This object is obsoleted in release 11.0. It is replaced by tRPAdminPSAccActionAddCommEntry, tRPAdminPSAccActionRemCommEntry, and tRPAdminPSAccActionRepCommEntry." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 8 } tRPAdminPSAcceptActionOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionOrigin specifies the origin of the route exported into BGP if it matches an entry. The value of this object tRPAdminPSAcceptActionOrigin is ignored when the object tRPAdminPSAcptActOriginSource has a value different from actionValue(1)." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 9 } tRPAdminPSAcceptActionLocalPreferenceSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When set to true(1), use tRPAdminPSAcceptActionLocalPreference for the local preference for the route. When the value of tRPAdminPSAcptActLocalPrefSource has a value different from actionValue(1), the value of tRPAdminPSAcceptActionLocalPreferenceSet and tRPAdminPSAcceptActionLocalPreference are ignored." DEFVAL { false } ::= { tRPAdminPSAcceptActionParamsEntry 10 } tRPAdminPSAcceptActionLocalPreference OBJECT-TYPE SYNTAX TmnxBgpLocalPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Local preference for the route. Ignored when tRPAdminPSAcceptActionLocalPreferenceSet is false(2). The value of this object tRPAdminPSAcceptActionLocalPreference is ignored when the object tRPAdminPSAcptActLocalPrefSource has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 11 } tRPAdminPSAcceptActionMetric OBJECT-TYPE SYNTAX TPolicyEntryEdit MAX-ACCESS read-create STATUS current DESCRIPTION "How to apply the metric value to the route. The metric value is obtained from tRPAdminPSAcceptActionMetricValue or tRPAdminPSAcptActMetricParam depending on the value of tRPAdminPSAcptActnMetricSource." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 12 } tRPAdminPSAcceptActionMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Value to add, subtract, or set for the route metric. Ignored when tRPAdminPSAcceptActionMetric is none(1). The value of this object tRPAdminPSAcceptActionMetricValue is ignored when the object tRPAdminPSAcptActnMetricSource is set to a value different from metricVal(2)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 13 } tRPAdminPSAcceptActionPreference OBJECT-TYPE SYNTAX TmnxBgpPreference MAX-ACCESS read-create STATUS current DESCRIPTION "Preference to set in route. The value of this object tRPAdminPSAcceptActionPreference is ignored when the object tRPAdminPSAcptActPreferenceSrc has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 15 } tRPAdminPSAcceptActionDamping OBJECT-TYPE SYNTAX TDampingName MAX-ACCESS read-create STATUS current DESCRIPTION "Damping to apply to route. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 16 } tRPAdminPSAcceptActionNextHopSelf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionNextHopSelf specifies the next-hop-self on the route. Next-hop-self cannot be set to 'true' at the same time as setting the other next-hop objects to a non-default value. Setting this object to 'true' will reset tRPAdminPSAcptActNextHopPeerAddr, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSAcptActNextHopSource and tRPAdminPSAcptActNextHopParam." DEFVAL { false } ::= { tRPAdminPSAcceptActionParamsEntry 17 } tRPAdminPSAcceptActionNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionNextHop indicates the next-hop IPv4 address in the route. The object is disabled if it holds the value 255.255.255.255. Next-hop cannot be set to a valid IP address at the same time as setting next-hop-self or peer-address to 'true'. Setting this object to a valid IP address will reset tRPAdminPSAcceptActionNextHopSelf and tRPAdminPSAcptActNextHopPeerAddr to 'false'. This object is the same as tRPAdminPSAcptActInetNextHop when a valid IPv4 address is set. Please use tRPAdminPSAcptActInetNextHop, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActNextHopSource and tRPAdminPSAcptActNextHopParam for extended next-hop address support." DEFVAL { 'FFFFFFFF'H } ::= { tRPAdminPSAcceptActionParamsEntry 18 } tRPAdminPSAcceptActionTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionTag specifies the tag for the route. A value of 0 for tRPAdminPSAcceptActionTag when specifies that tagging is disabled." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 19 } tRPAdminPSAcceptActionOspfType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "OSPF route type to set in route." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 20 } tRPAdminPSAcptActInetNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActInetNextHopType specifies the type of tRPAdminPSAcptActInetNextHop address, as defined in the InetAddress MIB. The value of this object tRPAdminPSAcptActInetNextHopType and tRPAdminPSAcptActInetNextHop are ignored when the object tRPAdminPSAcptActNextHopSource has a value different then actionValue(1)." ::= { tRPAdminPSAcceptActionParamsEntry 21 } tRPAdminPSAcptActInetNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActInetNextHop specifies the next-hop IP address in the route. To disable, tRPAdminPSAcptActInetNextHopType should be set to 'ipv6' and tRPAdminPSAcptActInetNextHop should be set to ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff. The type of this address is determined by the value of the tRPAdminPSAcptActInetNextHopType object. Next-hop cannot be set to a valid IP address at the same time as setting the next-hop-self or peer-address to 'true'. Setting this object to a valid IP address will reset tRPAdminPSAcceptActionNextHopSelf and tRPAdminPSAcptActNextHopPeerAddr to 'false'. tRPAdminPSAcptActInetNextHop object replaces tRPAdminPSAcceptActionNextHop that supports only IPv4 address style next-hop. The value of this object tRPAdminPSAcptActInetNextHop is ignored when the object tRPAdminPSAcptActNextHopSource has a value different from actionValue(1)." ::= { tRPAdminPSAcceptActionParamsEntry 22 } tRPAdminPSAcceptActionASPathPend OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionASPathPend specifies the AS Number to prepend to the AS-Path attribute of the route. The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPAdminPSAcceptActionASPathPrependCount is zero and tRPAdminPSAcptActASPPendCountSrc is set to actionValue(1). The value of this object tRPAdminPSAcceptActionASPathPend is ignored when the object tRPAdminPSAcptActASPathPendSrc has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 23 } tRPAdminPSAcceptActionFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionFC specifies the forwarding class associated with the routes matched by this route policy entry." DEFVAL { ''H } ::= { tRPAdminPSAcceptActionParamsEntry 24 } tRPAdminPSAcceptActionFCPriority OBJECT-TYPE SYNTAX TPriorityOrUndefined MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcceptActionFCPriority specifies the priority to be assigned to the routes matched by this route policy entry." DEFVAL { undefined } ::= { tRPAdminPSAcceptActionParamsEntry 25 } tRPAdminPSAcptActMcRedirSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActMcRedirSvcId specifies the service ID of the service where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 30 } tRPAdminPSAcptActMcRedirIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActMcRedirIfIndex specifies the interface index of the interface where to redirect IGMP/MLD multicast traffic to. The value zero means that no multicast redirection is configured." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 31 } tRPAdminPSAcptActnMetricSource OBJECT-TYPE SYNTAX TPolicyActionMetricSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnMetricSource specifies the source of the accept action metric. When the value of tRPAdminPSAcptActnMetricSource is set to 'igpCost(1)' the value of tRPAdminPSAcceptActionMetricValue and tRPAdminPSAcptActMetricParam are ignored; and the value of MED (Multi Exit Discriminator) or the metric value is derived from the IGP (Interior Gateway Protocol) cost of the route. The default value of tRPAdminPSAcptActnMetricSource is 'metricVal(2)' which means the metric value is the value of tRPAdminPSAcceptActionMetricValue. The value of the object tRPAdminPSAcptActMetricParam is ignored. The value 'metricParam(3) means the metric value is derived from the object tRPAdminPSAcptActMetricParam; the value of the object tRPAdminPSAcceptActionMetricValue is ignored." DEFVAL { metricVal } ::= { tRPAdminPSAcceptActionParamsEntry 32 } tRPAdminPSAcptActionAigpMetric OBJECT-TYPE SYNTAX TPolicyEntryAigpMetricEdit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActionAigpMetric specifies the editing action to be taken for the AIGP (Accumulated IGP) attribute when the route satisfies the match criteria of the policy. The value of tRPAdminPSAcptActionAigpMetric decides how to apply tRPAdminPSAcptActnAigpMetricVal to the route. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActnAigpMetricVal, tRPAdminPSAcptActAigpMetricSrc and tRPAdminPSAcptActAigpMetricParam are ignored." DEFVAL { none } ::= { tRPAdminPSAcceptActionParamsEntry 33 } tRPAdminPSAcptActnAigpMetricVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnAigpMetricVal specifies the value to add or set for the route AIGP(Accumulated IGP) metric. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActnAigpMetricVal is ignored. The value of this object tRPAdminPSAcptActnAigpMetricVal is ignored when the object tRPAdminPSAcptActAigpMetricSrc has a value different from actionValue(1)." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 34 } tRPAdminPSAcptActnSrcClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnSrcClassIndex specifies the admin source-class for this policy statement. A value of 0 means no source-class." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 35 } tRPAdminPSAcptActnDstClassIndex OBJECT-TYPE SYNTAX ClassIndexOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnDstClassIndex specifies the admin dest-class for this policy statement. A value of 0 means no dest-class." DEFVAL { 0 } ::= { tRPAdminPSAcceptActionParamsEntry 36 } tRPAdminPSAcptActnOrigValidState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), valid (1), notFound (2), invalid (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActnOrigValidState specifies the admin origin validation state for this policy statement. The value of this object tRPAdminPSAcptActnOrigValidState is ignored when the object tRPAdminPSAcptActOrigValStateSrc has a value different from actionValue(1)." DEFVAL { notApplicable } ::= { tRPAdminPSAcceptActionParamsEntry 37 } tRPAdminPSToCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of policy statement entry 'to' criteria" ::= { tRPAdminValueObjects 9 } tRPAdminPSToCriteriaEntry OBJECT-TYPE SYNTAX TRPAdminPSToCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry -to- criteria. Entries are created when a policy statement entry is created. Entries are deleted when a policy statement entry is destroyed." INDEX { tRPAdminPolicyStatementName, tRPAdminPSToCriteriaIndex } ::= { tRPAdminPSToCriteriaTable 1 } TRPAdminPSToCriteriaEntry ::= SEQUENCE { tRPAdminPSToCriteriaIndex TPolicyStatementEntryID, tRPAdminPSToCriteriaRowStatus RowStatus, tRPAdminPSToCriteriaProtocol TRoutePolicyProtocol, tRPAdminPSToCriteriaNeighborIpAddr IpAddress, tRPAdminPSToCriteriaNeighborPrefixList TPrefixListName, tRPAdminPSToCriteriaIsisLevel TIsisLevel, tRPAdminPSToCriteriaPrefixList1 TPrefixListName, tRPAdminPSToCriteriaPrefixList2 TPrefixListName, tRPAdminPSToCriteriaPrefixList3 TPrefixListName, tRPAdminPSToCriteriaPrefixList4 TPrefixListName, tRPAdminPSToCriteriaPrefixList5 TPrefixListName, tRPAdminPSToCritNbrInetAddrType InetAddressType, tRPAdminPSToCritNbrInetAddr InetAddress, tRPAdminPSToCriteriaInstanceId Unsigned32, tRPAdminPSToCritProtocolBits TRoutePolicyProtocolBits } tRPAdminPSToCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPAdminPSToCriteriaEntry 1 } tRPAdminPSToCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSToCriteriaRowStatus specifies the RowStatus for this row. To Create a row, set this object to createAndGo(4). When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPSToCriteriaTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPSToCriteriaTable." ::= { tRPAdminPSToCriteriaEntry 2 } tRPAdminPSToCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The protocol name to match on. Set to none(1) to disable. This object is deprecated, please use the object tRPAdminPSToCritProtocolBits instead." DEFVAL { none } ::= { tRPAdminPSToCriteriaEntry 3 } tRPAdminPSToCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 255.255.255.255 to disable." DEFVAL { 'FFFFFFFF'H } ::= { tRPAdminPSToCriteriaEntry 4 } tRPAdminPSToCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 5 } tRPAdminPSToCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value for tRPAdminPSToCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." DEFVAL { 0 } ::= { tRPAdminPSToCriteriaEntry 7 } tRPAdminPSToCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList1 specifies the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPAdminPSToCritPrefixList1, please use tRPAdminPSToCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 8 } tRPAdminPSToCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList2 specifies the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPAdminPSToCritPrefixList2, please use tRPAdminPSToCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 9 } tRPAdminPSToCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList3 specifies the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPAdminPSToCritPrefixList3, please use tRPAdminPSToCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 10 } tRPAdminPSToCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList4 specifies the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPAdminPSToCritPrefixList4, please use tRPAdminPSToCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 11 } tRPAdminPSToCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaPrefixList5 specifies the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria. This object is the same as tRPAdminPSToCritPrefixList5, please use tRPAdminPSToCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSToCriteriaEntry 12 } tRPAdminPSToCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritNbrInetAddrType specifies the type of tRPAdminPSToCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPAdminPSToCriteriaEntry 13 } tRPAdminPSToCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritNbrInetAddr specifies the IP address of neighbor to match on. To disable, tRPAdminPSToCritNbrInetAddrType should be set to 'ipv4' and tRPAdminPSToCritNbrInetAddr should be set to ff:ff:ff:ff. The type of this address is determined by the value of the tRPAdminPSToCritNbrInetAddrType object. tRPAdminPSToCritNbrInetAddr object replaces tRPAdminPSToCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPAdminPSToCriteriaEntry 14 } tRPAdminPSToCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31 | 64..95 | 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCriteriaInstanceId specifies the instance identifier of the ISIS or OSPF(v3) protocol running in the router instance. The value of tRPAdminPSToCriteriaInstanceId will be 0 in case tRPAdminPSToCritProtocolBits has bits set different from isis(5), ospf(6) and ospf3(12). The range of instance identifiers between 64 and 95 is only supported in case tRPAdminPSToCritProtocolBits has the ospf3(12) bit set. If the value of tRPAdminPSToCriteriaInstanceId is 4294967295, all instances of the ISIS or OSPF(v3) protocol are leaked into BGP." DEFVAL { 0 } ::= { tRPAdminPSToCriteriaEntry 15 } tRPAdminPSToCritProtocolBits OBJECT-TYPE SYNTAX TRoutePolicyProtocolBits MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritProtocolBits specifies the protocol name to match on. When the 'none' bit is set, the protocol match criteria is disabled." DEFVAL { {none} } ::= { tRPAdminPSToCriteriaEntry 16 } tRPAdminPSFromCriteriaTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of from filter criteria for each policy statement entry." ::= { tRPAdminValueObjects 10 } tRPAdminPSFromCriteriaEntry OBJECT-TYPE SYNTAX TRPAdminPSFromCriteriaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry from criteria." INDEX { tRPAdminPolicyStatementName, tRPAdminPSFromCriteriaIndex } ::= { tRPAdminPSFromCriteriaTable 1 } TRPAdminPSFromCriteriaEntry ::= SEQUENCE { tRPAdminPSFromCriteriaIndex TPolicyStatementEntryID, tRPAdminPSFromCriteriaRowStatus RowStatus, tRPAdminPSFromCriteriaProtocol TRoutePolicyProtocol, tRPAdminPSFromCriteriaNeighborIpAddr IpAddress, tRPAdminPSFromCriteriaNeighborPrefixList TPrefixListName, tRPAdminPSFromCriteriaPrefixList1 TPrefixListName, tRPAdminPSFromCriteriaPrefixList2 TPrefixListName, tRPAdminPSFromCriteriaPrefixList3 TPrefixListName, tRPAdminPSFromCriteriaPrefixList4 TPrefixListName, tRPAdminPSFromCriteriaPrefixList5 TPrefixListName, tRPAdminPSFromCriteriaASPath TASPathName, tRPAdminPSFromCriteriaCommunity TLCommunityName, tRPAdminPSFromCriteriaOrigin TPolicyEntryCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType TOspfRouteType, tRPAdminPSFromCriteriaArea IpAddress, tRPAdminPSFromCriteriaAreaConfigured TruthValue, tRPAdminPSFromCriteriaIsisLevel TIsisLevel, tRPAdminPSFromCriteriaIsisExternal TruthValue, tRPAdminPSFromCriteriaIgmpHostPrefixList TPrefixListName, tRPAdminPSFromCriteriaGrpAddrPrefixList TPrefixListName, tRPAdminPSFromCriteriaSrcAddr IpAddress, tRPAdminPSFromCriteriaInterface TNamedItemOrEmpty, tRPAdminPSFromCriteriaTag TPolicyActionTag, tRPAdminPSFromCritNbrInetAddrType InetAddressType, tRPAdminPSFromCritNbrInetAddr InetAddress, tRPAdminPSFromCritSrcInetAddrType InetAddressType, tRPAdminPSFromCritSrcInetAddr InetAddress, tRPAdminPSFromCriteriaFamily TmnxBGPFamilyType, tRPAdminPSFromCriteriaInstanceId Unsigned32, tRPAdminPSFromCriteriaMatchTag TmnxEnabledDisabled, tRPAdminPSFromCriteriaState TPolicyEntryCriteriaState, tRPAdminPSFromCritASPathGroup TASPathGroupName, tRPAdminPSFromCriteriaPolicy TXLPolicyNameOrExpOrEmpty, tRPAdminPSFromCritCreationOrigin TmnxCreateOrigin, tRPAdminPSFromCritProtocolBits TRoutePolicyProtocolBits } tRPAdminPSFromCriteriaIndex OBJECT-TYPE SYNTAX TPolicyStatementEntryID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The policy statement entry ID" ::= { tRPAdminPSFromCriteriaEntry 1 } tRPAdminPSFromCriteriaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaRowStatus specifies the RowStatus for this row. To Create a row, set this object to 'createAndGo(4)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperPSFromCriteriaTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperPSFromCriteriaTable." ::= { tRPAdminPSFromCriteriaEntry 2 } tRPAdminPSFromCriteriaProtocol OBJECT-TYPE SYNTAX TRoutePolicyProtocol MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The protocol name to match on. Set to none(1) to disable. This object is deprecated, please use the object tRPAdminPSFromCritProtocolBits instead." DEFVAL { none } ::= { tRPAdminPSFromCriteriaEntry 3 } tRPAdminPSFromCriteriaNeighborIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address of neighbor to match on. Set to 255.255.255.255 to disable." DEFVAL { 'FFFFFFFF'H } ::= { tRPAdminPSFromCriteriaEntry 4 } tRPAdminPSFromCriteriaNeighborPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of a neighbor prefix list to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 5 } tRPAdminPSFromCriteriaPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the first prefix list to match on. Set to empty string to disable. This object is the same as tRPAdminPSFromCritPrefixList1, please use tRPAdminPSFromCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 6 } tRPAdminPSFromCriteriaPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the second prefix list to match on. Set to empty string to disable. This object is the same as tRPAdminPSFromCritPrefixList2, please use tRPAdminPSFromCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 7 } tRPAdminPSFromCriteriaPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the third prefix list to match on. Set to empty string to disable. This object is the same as tRPAdminPSFromCritPrefixList3, please use tRPAdminPSFromCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 8 } tRPAdminPSFromCriteriaPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the fourth prefix list to match on. Set to empty string to disable. This object is the same as tRPAdminPSFromCritPrefixList4, please use tRPAdminPSFromCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 9 } tRPAdminPSFromCriteriaPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the fifth prefix list to match on. Set to empty string to disable. This object is the same as tRPAdminPSFromCritPrefixList5, please use tRPAdminPSFromCritPfxListTable to match on more prefix lists." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 10 } tRPAdminPSFromCriteriaASPath OBJECT-TYPE SYNTAX TASPathName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the AS Path to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 11 } tRPAdminPSFromCriteriaCommunity OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the community to match on. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaEntry 12 } tRPAdminPSFromCriteriaOrigin OBJECT-TYPE SYNTAX TPolicyEntryCriteriaOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaOrigin specifies the route match criterion for an entry." DEFVAL { none } ::= { tRPAdminPSFromCriteriaEntry 13 } tRPAdminPSFromCriteriaOspfRouteType OBJECT-TYPE SYNTAX TOspfRouteType MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF route type to match on. Set to zero to disable." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 14 } tRPAdminPSFromCriteriaArea OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Used when redistributing OSPF routes into other protocols. Specifies the OSPF area that must be matched in filtered routes." ::= { tRPAdminPSFromCriteriaEntry 16 } tRPAdminPSFromCriteriaAreaConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies if the tRPAdminPSFromCriteriaArea has been configured" ::= { tRPAdminPSFromCriteriaEntry 17 } tRPAdminPSFromCriteriaIsisLevel OBJECT-TYPE SYNTAX TIsisLevel MAX-ACCESS read-create STATUS current DESCRIPTION "The value for tRPAdminPSFromCriteriaIsisLevel defines the IS-IS route level match criterion. A value of 0 indicates that no IS-IS route level match criterion has been configured." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 18 } tRPAdminPSFromCriteriaIsisExternal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When tRPAdminPSFromCriteriaIsisExternal is 'true', match only External IS-IS routes. If 'false', match all routes. External IS-IS routes are those routes that have been learned from outside the IS-IS domain." DEFVAL { false } ::= { tRPAdminPSFromCriteriaEntry 19 } tRPAdminPSFromCriteriaIgmpHostPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaIgmpHostPrefixList contains the name of the prefix list that is used to match the IGMP/MLD host IP address. This object is set to empty string to disable." ::= { tRPAdminPSFromCriteriaEntry 20 } tRPAdminPSFromCriteriaGrpAddrPrefixList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaGrpAddrPrefixList contains the name of the prefix list that is used to match the multicast group address. This object is set to empty string to disable." ::= { tRPAdminPSFromCriteriaEntry 21 } tRPAdminPSFromCriteriaSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaSrcAddr contains the IP address of the source to match on. It is used by multicast protocols like IGMP/MLD and PIM. This object is set to 0.0.0.0 to disable." ::= { tRPAdminPSFromCriteriaEntry 22 } tRPAdminPSFromCriteriaInterface OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "tRPAdminPSFromCriteriaInterface contains the name of the interface to match on. PIM Bootstrap route policy will use this object to accept/reject bootstrap messages coming on the interface specified by this object. This object is set to empty string to disable." ::= { tRPAdminPSFromCriteriaEntry 23 } tRPAdminPSFromCriteriaTag OBJECT-TYPE SYNTAX TPolicyActionTag MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaTag specifies the route tag to match on. Routes will only be matched on this value when tRPAdminPSFromCriteriaMatchTag is enabled. A value of 0 for tRPAdminPSFromCriteriaTag when tRPAdminPSFromCriteriaMatchTag is enabled would match untagged routes." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 24 } tRPAdminPSFromCritNbrInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNbrInetAddrType specifies the type of tRPAdminPSFromCritNbrInetAddr address, as defined in the InetAddress MIB." ::= { tRPAdminPSFromCriteriaEntry 25 } tRPAdminPSFromCritNbrInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNbrInetAddr specifies the IP address of neighbor to match on. To disable, tRPAdminPSFromCritNbrInetAddrType should be set to 'ipv4' and tRPAdminPSFromCritNbrInetAddr should be set to ff:ff:ff:ff. The type of this address is determined by the value of the tRPAdminPSFromCritNbrInetAddrType object. tRPAdminPSFromCritNbrInetAddr object replaces tRPAdminPSFromCriteriaNeighborIpAddr that supports only IPv4 address style neighbor." ::= { tRPAdminPSFromCriteriaEntry 26 } tRPAdminPSFromCritSrcInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritSrcInetAddrType specifies the type of tRPAdminPSFromCritSrcInetAddr address, as defined in the InetAddress MIB." ::= { tRPAdminPSFromCriteriaEntry 27 } tRPAdminPSFromCritSrcInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritSrcInetAddr specifies the IP address of the source to match on. This object will be used by multicast protocols like PIM and IGMP/MLD. To disable, tRPAdminPSFromCritSrcInetAddrType should be set to 'ipv4' and tRPAdminPSFromCritSrcInetAddr should be set to 255.255.255.255. The type of this address is determined by the value of the tRPAdminPSFromCritSrcInetAddrType object. tRPAdminPSFromCritSrcInetAddr object replaces tRPAdminPSFromCriteriaSrcAddr that supports only IPv4 address style source." ::= { tRPAdminPSFromCriteriaEntry 28 } tRPAdminPSFromCriteriaFamily OBJECT-TYPE SYNTAX TmnxBGPFamilyType MAX-ACCESS read-create STATUS current DESCRIPTION "The bits set in the value of tRPAdminPSFromCriteriaFamily specifies the address families that this condition would match against." DEFVAL { {} } ::= { tRPAdminPSFromCriteriaEntry 29 } tRPAdminPSFromCriteriaInstanceId OBJECT-TYPE SYNTAX Unsigned32 (0..31 | 64..95 | 4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaInstanceId specifies the instance identifier of the ISIS or OSPF(v3) protocol running in the router instance. The value of tRPAdminPSFromCriteriaInstanceId will be 0 in case tRPAdminPSFromCritProtocolBits has bits set different from isis(5), ospf(6) and ospf3(12). The range of instance identifiers between 64 and 95 is only supported in case tRPAdminPSFromCritProtocolBits has the ospf3(12) bit set. If the value of tRPAdminPSFromCriteriaInstanceId is 4294967295, all instances of the ISIS or OSPF(v3) protocol are leaked into BGP." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaEntry 30 } tRPAdminPSFromCriteriaMatchTag OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaMatchTag specifies if tag matching is enabled or disabled. Disabling of this object will set tRPAdminPSFromCriteriaTag to zero." DEFVAL { disabled } ::= { tRPAdminPSFromCriteriaEntry 31 } tRPAdminPSFromCriteriaState OBJECT-TYPE SYNTAX TPolicyEntryCriteriaState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaState specifies the route state match criterion for this entry." DEFVAL { none } ::= { tRPAdminPSFromCriteriaEntry 32 } tRPAdminPSFromCritASPathGroup OBJECT-TYPE SYNTAX TASPathGroupName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritASPathGroup specifies the AS-Path Group match criterion for this entry." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaEntry 33 } tRPAdminPSFromCriteriaPolicy OBJECT-TYPE SYNTAX TXLPolicyNameOrExpOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCriteriaPolicy specifies the policy match criterion for this entry. The value of this object is used to link match criteria over multiple policy entries, to implement more complex match conditions." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaEntry 34 } tRPAdminPSFromCritCreationOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPSFromCritCreationOrigin indicates the mechanism used to create this entry." ::= { tRPAdminPSFromCriteriaEntry 35 } tRPAdminPSFromCritProtocolBits OBJECT-TYPE SYNTAX TRoutePolicyProtocolBits MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritProtocolBits specifies the protocol name to match on. When the 'none' bit is set, the protocol match criteria is disabled." DEFVAL { {none} } ::= { tRPAdminPSFromCriteriaEntry 36 } tRPAdminInetPrefixListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IPv4 and IPv6 admin prefix lists." ::= { tRPAdminValueObjects 11 } tRPAdminInetPrefixListEntry OBJECT-TYPE SYNTAX TRPAdminInetPrefixListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminInetPrefixListEntry represents information about a particular prefix list. Entries are created and deleted by the user. When a prefix list entry is created with a name that doesn't exist in the tRPAdminPfxListNameTable, a corresponding entry will be created automatically in tRPAdminPfxListNameTable. When a corresponding entry is deleted from tRPAdminPfxListNameTable, the entry in this table will be deleted automatically." INDEX { tRPAdminInetPrefixListName, tRPAdminInetPrefixListPrefixType, tRPAdminInetPrefixListPrefix, tRPAdminInetPrefixListPrefixLen, tRPAdminInetPrefixListType } ::= { tRPAdminInetPrefixListTable 1 } TRPAdminInetPrefixListEntry ::= SEQUENCE { tRPAdminInetPrefixListName TPrefixListName, tRPAdminInetPrefixListPrefixType TmnxAddressAndPrefixType, tRPAdminInetPrefixListPrefix TmnxAddressAndPrefixAddress, tRPAdminInetPrefixListPrefixLen TmnxAddressAndPrefixPrefix, tRPAdminInetPrefixListType INTEGER, tRPAdminInetPrefixListRowStatus RowStatus, tRPAdminInetPrefixListThroughLen InetAddressPrefixLength, tRPAdminInetPrefixListBeginLen InetAddressPrefixLength, tRPAdminInetPrefixListCrOrigin TmnxCreateOrigin } tRPAdminInetPrefixListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListName indicates the name of the prefix list entry. This object refers to the object tRPAdminPfxListName in tRPAdminPfxListNameTable." ::= { tRPAdminInetPrefixListEntry 1 } tRPAdminInetPrefixListPrefixType OBJECT-TYPE SYNTAX TmnxAddressAndPrefixType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListPrefixType indicates the address type of tRPAdminInetPrefixListPrefix." ::= { tRPAdminInetPrefixListEntry 2 } tRPAdminInetPrefixListPrefix OBJECT-TYPE SYNTAX TmnxAddressAndPrefixAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListPrefix indicates the IP prefix of the prefix list entry." ::= { tRPAdminInetPrefixListEntry 3 } tRPAdminInetPrefixListPrefixLen OBJECT-TYPE SYNTAX TmnxAddressAndPrefixPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListPrefixLen indicates the IP prefix length of the prefix list entry." ::= { tRPAdminInetPrefixListEntry 4 } tRPAdminInetPrefixListType OBJECT-TYPE SYNTAX INTEGER { exact (1), longer (2), through (3), range (4), to (5), addressMask (6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListType indicates the type of the prefix length entry. exact (1) - a route's prefix/length must match the prefix list entry exactly in order for an entry to be considered a match. longer (2) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer in order for an entry to be considered a match. through (3) - a route's prefix/length must match the defined prefix AND have a length that is an exact match or longer up to and including the defined maximum length in order for an entry to be considered a match. range (4) - a route's prefix/length must match the defined prefix AND have a length that is greater than or equal to the length defined by tRPAdminInetPrefixListBeginLen and less than or equal to the length defined by tRPAdminInetPrefixListThroughLen in order for an entry to be considered a match. to (5) - a route's prefix/length must match the condition from a start prefix/length to an end prefix/length. The end prefix/length must be specified in a corresponding entry in the tRPAdminPfxListToTable. addressMask (6) - a route's prefix/length must match the prefix length of the prefix-list entry and the bitwise logical AND of the route address and the mask must match the bitwise logical AND from the prefix-list address and the mask. The address mask must be specified in a corresponding entry in the tRPAdminPfxListAddressMaskTable." ::= { tRPAdminInetPrefixListEntry 5 } tRPAdminInetPrefixListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperInetPrefixListTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperInetPrefixListTable." ::= { tRPAdminInetPrefixListEntry 6 } tRPAdminInetPrefixListThroughLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListThroughLen specifies the prefix length to use when tRPAdminPrefixListType set to through(3). The value must be larger than tRPAdminInetPrefixListPrefixLen." DEFVAL { 0 } ::= { tRPAdminInetPrefixListEntry 7 } tRPAdminInetPrefixListBeginLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminInetPrefixListBeginLen specifies the prefix length to use as the lower limit for the prefix range when tRPAdminInetPrefixListType set to range(4). The value must be larger than tRPAdminInetPrefixListPrefixLen and less than tRPAdminInetPrefixListThroughLen." DEFVAL { 0 } ::= { tRPAdminInetPrefixListEntry 8 } tRPAdminInetPrefixListCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminInetPrefixListCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminInetPrefixListEntry 9 } tRPAdminCommunityExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of community entries." ::= { tRPAdminValueObjects 12 } tRPAdminCommunityExprEntry OBJECT-TYPE SYNTAX TRPAdminCommunityExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community name member. Entries are created and deleted by the user." INDEX { tRPAdminCommunityExprName } ::= { tRPAdminCommunityExprTable 1 } TRPAdminCommunityExprEntry ::= SEQUENCE { tRPAdminCommunityExprName TLCommunityName, tRPAdminCommunityExprRowStatus RowStatus, tRPAdminCommunityExprString1 TCommunityMemberExpression, tRPAdminCommunityExprString2 TCommunityMemberExpression, tRPAdminCommunityExprString3 TCommunityMemberExpression, tRPAdminCommunityExprString4 TCommunityMemberExpression, tRPAdminCommunityExprExactMatch TruthValue } tRPAdminCommunityExprName OBJECT-TYPE SYNTAX TLCommunityName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminCommunityExprName indicates the name of the community used as an index for this table." ::= { tRPAdminCommunityExprEntry 1 } tRPAdminCommunityExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminCommunityExprRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. The value of tRPAdminCommunityExprString1 must be set to a non-empty string in the same SNMP SET PDU for the row creation to succeed. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityExprTable. When the value of this object is set to 'createAndWait(5)', a new entry is created with value of this object set to 'notInService(2)' and the tRPAdminCommunityExprString1-4 strings can be configured separately. When the value of this object is set to 'active(1)', the values of objects tRPAdminCommunityExprString1-4, are concatenated to form one expression of at most 900 characters. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityExprTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperCommunityExprTable." ::= { tRPAdminCommunityExprEntry 2 } tRPAdminCommunityExprString1 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString1 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 3 } tRPAdminCommunityExprString2 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString2 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 4 } tRPAdminCommunityExprString3 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString3 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 5 } tRPAdminCommunityExprString4 OBJECT-TYPE SYNTAX TCommunityMemberExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprString4 specifies an expression that matches AS Numbers or Community ID's. The objects tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3 and tRPAdminCommunityExprString4 are substrings that form one string of type TCommunityMemberExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminCommunityExprEntry 6 } tRPAdminCommunityExprExactMatch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminCommunityExprExactMatch specifies whether the expression in this table entry is only evaluated on an exact match. If the value of this object is 'true', then the community expression only matches a given route if all communities attached to the route are strictly required to match the expression and no redundant communities are present." DEFVAL { false } ::= { tRPAdminCommunityExprEntry 7 } tRPAdminASPathGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of AS-Path Groups." ::= { tRPAdminValueObjects 13 } tRPAdminASPathGroupEntry OBJECT-TYPE SYNTAX TRPAdminASPathGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminASPathGroupTable represents information about a particular AS-Path Group. When an AS-Path Group entry is created with a name that doesn't exist in the tRPAdminASPathGroupNameTable, a corresponding entry will be created automatically in tRPAdminASPathGroupNameTable. When a corresponding entry is deleted from tRPAdminASPathGroupNameTable, the entry in this table will be deleted automatically." INDEX { tRPAdminASPathGroupName, tRPAdminASPathGroupEntryIndex } ::= { tRPAdminASPathGroupTable 1 } TRPAdminASPathGroupEntry ::= SEQUENCE { tRPAdminASPathGroupName TASPathGroupName, tRPAdminASPathGroupEntryIndex Unsigned32, tRPAdminASPathGroupRowStatus RowStatus, tRPAdminASPathGroupASPathName TASPathName, tRPAdminASPathGroupASPathRegEx TRoutePolicyRegex, tRPAdminASPathGroupCrOrigin TmnxCreateOrigin } tRPAdminASPathGroupName OBJECT-TYPE SYNTAX TASPathGroupName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminASPathGroupName specifies the name of the AS-Path Group. This object refers to the object tRPAdminASPGroupName in tRPAdminASPathGroupNameTable." ::= { tRPAdminASPathGroupEntry 1 } tRPAdminASPathGroupEntryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminASPathGroupEntryIndex specifies the index of the entry in the AS-Path Group." ::= { tRPAdminASPathGroupEntry 2 } tRPAdminASPathGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminASPathGroupRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperASPathGroupTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperASPathGroupTable." ::= { tRPAdminASPathGroupEntry 3 } tRPAdminASPathGroupASPathName OBJECT-TYPE SYNTAX TASPathName (SIZE (1..32)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tRPAdminASPathGroupASPathName specifies the name of the AS-Path from the tRPAdminASPathTable. This object is made obsolete in release 14.0." ::= { tRPAdminASPathGroupEntry 4 } tRPAdminASPathGroupASPathRegEx OBJECT-TYPE SYNTAX TRoutePolicyRegex MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminASPathGroupASPathRegEx specifies the regular expression for this AS-Path Group entry. This object must be set to a valid non-empty string for the row creation to succeed." ::= { tRPAdminASPathGroupEntry 5 } tRPAdminASPathGroupCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminASPathGroupCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminASPathGroupEntry 6 } tRPAdminPSFromCommExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSFromCommExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of from filter criteria to match on Community ID's for each policy statement entry." ::= { tRPAdminValueObjects 14 } tRPAdminPSFromCommExprEntry OBJECT-TYPE SYNTAX TRPAdminPSFromCommExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular community name expression to use as match criterion for this policy statement entry." INDEX { tRPAdminPolicyStatementName, tRPAdminPSFromCriteriaIndex } ::= { tRPAdminPSFromCommExprTable 1 } TRPAdminPSFromCommExprEntry ::= SEQUENCE { tRPAdminPSFromCommExprRowStatus RowStatus, tRPAdminPSFromCommExprString1 TCommunityNameExpression, tRPAdminPSFromCommExprString2 TCommunityNameExpression, tRPAdminPSFromCommExprString3 TCommunityNameExpression, tRPAdminPSFromCommExprString4 TCommunityNameExpression } tRPAdminPSFromCommExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCommExprRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. The value of tRPAdminPSFromCommExprString1 must be set to a non-empty string in the same SNMP SET PDU for the row creation to succeed. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperPSFromCommExprTable. When the value of this object is set to 'createAndWait(5)', a new entry is created with value of this object set to 'notInService(2)' and the tRPAdminPSFromCommExprString1-4 strings can be configured separately. When the value of this object is set to 'active(1)', the values of objects tRPAdminPSFromCommExprString1-4, are concatenated to form one expression of at most 900 characters. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperPSFromCommExprTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperPSFromCommExprTable." ::= { tRPAdminPSFromCommExprEntry 1 } tRPAdminPSFromCommExprString1 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminPSFromCommExprString1 specifies an expression that matches Community ID's. The objects tRPAdminPSFromCommExprString1, tRPAdminPSFromCommExprString2, tRPAdminPSFromCommExprString3 and tRPAdminPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminPSFromCommExprEntry 2 } tRPAdminPSFromCommExprString2 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminPSFromCommExprString2 specifies an expression that matches Community ID's. The objects tRPAdminPSFromCommExprString1, tRPAdminPSFromCommExprString2, tRPAdminPSFromCommExprString3 and tRPAdminPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminPSFromCommExprEntry 3 } tRPAdminPSFromCommExprString3 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminPSFromCommExprString3 specifies an expression that matches Community ID's. The objects tRPAdminPSFromCommExprString1, tRPAdminPSFromCommExprString2, tRPAdminPSFromCommExprString3 and tRPAdminPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminPSFromCommExprEntry 4 } tRPAdminPSFromCommExprString4 OBJECT-TYPE SYNTAX TCommunityNameExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminPSFromCommExprString4 specifies an expression that matches Community ID's. The objects tRPAdminPSFromCommExprString1, tRPAdminPSFromCommExprString2, tRPAdminPSFromCommExprString3 and tRPAdminPSFromCommExprString4 are substrings that form one string of type TCommunityNameExpression. Substrings can only be set to a non-empty string if the previous substrings are non-empty." DEFVAL { "" } ::= { tRPAdminPSFromCommExprEntry 5 } tRPAdminPSDefActionAddCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSDefActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default community names for a policy statement to add to routes." ::= { tRPAdminValueObjects 15 } tRPAdminPSDefActionAddCommEntry OBJECT-TYPE SYNTAX TRPAdminPSDefActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These communities are applied when the default action for the policy statement (tRPAdminPolicyStatementDefaultAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPAdminPSDefaultActionParamsTable is created or deleted." AUGMENTS { tRPAdminPSDefaultActionParamsEntry } ::= { tRPAdminPSDefActionAddCommTable 1 } TRPAdminPSDefActionAddCommEntry ::= SEQUENCE { tRPAdminPSDefActionAddComm1 TLCommunityName, tRPAdminPSDefActionAddComm2 TLCommunityName, tRPAdminPSDefActionAddComm3 TLCommunityName, tRPAdminPSDefActionAddComm4 TLCommunityName, tRPAdminPSDefActionAddComm5 TLCommunityName, tRPAdminPSDefActionAddComm6 TLCommunityName, tRPAdminPSDefActionAddComm7 TLCommunityName, tRPAdminPSDefActionAddComm8 TLCommunityName, tRPAdminPSDefActionAddComm9 TLCommunityName, tRPAdminPSDefActionAddComm10 TLCommunityName, tRPAdminPSDefActionAddComm11 TLCommunityName, tRPAdminPSDefActionAddComm12 TLCommunityName, tRPAdminPSDefActionAddComm13 TLCommunityName, tRPAdminPSDefActionAddComm14 TLCommunityName, tRPAdminPSDefActionAddComm15 TLCommunityName, tRPAdminPSDefActionAddComm16 TLCommunityName, tRPAdminPSDefActionAddComm17 TLCommunityName, tRPAdminPSDefActionAddComm18 TLCommunityName, tRPAdminPSDefActionAddComm19 TLCommunityName, tRPAdminPSDefActionAddComm20 TLCommunityName, tRPAdminPSDefActionAddComm21 TLCommunityName, tRPAdminPSDefActionAddComm22 TLCommunityName, tRPAdminPSDefActionAddComm23 TLCommunityName, tRPAdminPSDefActionAddComm24 TLCommunityName, tRPAdminPSDefActionAddComm25 TLCommunityName, tRPAdminPSDefActionAddComm26 TLCommunityName, tRPAdminPSDefActionAddComm27 TLCommunityName, tRPAdminPSDefActionAddComm28 TLCommunityName } tRPAdminPSDefActionAddComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm1 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 1 } tRPAdminPSDefActionAddComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm2 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 2 } tRPAdminPSDefActionAddComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm3 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 3 } tRPAdminPSDefActionAddComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm4 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 4 } tRPAdminPSDefActionAddComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm5 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 5 } tRPAdminPSDefActionAddComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm6 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 6 } tRPAdminPSDefActionAddComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm7 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 7 } tRPAdminPSDefActionAddComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm8 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 8 } tRPAdminPSDefActionAddComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm9 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 9 } tRPAdminPSDefActionAddComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm10 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 10 } tRPAdminPSDefActionAddComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm11 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 11 } tRPAdminPSDefActionAddComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm12 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 12 } tRPAdminPSDefActionAddComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm13 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 13 } tRPAdminPSDefActionAddComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm14 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 14 } tRPAdminPSDefActionAddComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm15 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 15 } tRPAdminPSDefActionAddComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm16 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 16 } tRPAdminPSDefActionAddComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm17 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 17 } tRPAdminPSDefActionAddComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm18 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 18 } tRPAdminPSDefActionAddComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm19 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 19 } tRPAdminPSDefActionAddComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm20 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 20 } tRPAdminPSDefActionAddComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm21 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 21 } tRPAdminPSDefActionAddComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm22 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 22 } tRPAdminPSDefActionAddComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm23 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 23 } tRPAdminPSDefActionAddComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm24 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 24 } tRPAdminPSDefActionAddComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm25 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 25 } tRPAdminPSDefActionAddComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm26 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 26 } tRPAdminPSDefActionAddComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm27 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 27 } tRPAdminPSDefActionAddComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionAddComm28 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionAddCommEntry 28 } tRPAdminPSDefActionRemCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSDefActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default community names for a policy statement to remove from routes." ::= { tRPAdminValueObjects 16 } tRPAdminPSDefActionRemCommEntry OBJECT-TYPE SYNTAX TRPAdminPSDefActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These communities are applied when the default action for the policy statement (tRPAdminPolicyStatementDefaultAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPAdminPSDefaultActionParamsTable is created or deleted." AUGMENTS { tRPAdminPSDefaultActionParamsEntry } ::= { tRPAdminPSDefActionRemCommTable 1 } TRPAdminPSDefActionRemCommEntry ::= SEQUENCE { tRPAdminPSDefActionRemoveComm1 TLCommunityName, tRPAdminPSDefActionRemoveComm2 TLCommunityName, tRPAdminPSDefActionRemoveComm3 TLCommunityName, tRPAdminPSDefActionRemoveComm4 TLCommunityName, tRPAdminPSDefActionRemoveComm5 TLCommunityName, tRPAdminPSDefActionRemoveComm6 TLCommunityName, tRPAdminPSDefActionRemoveComm7 TLCommunityName, tRPAdminPSDefActionRemoveComm8 TLCommunityName, tRPAdminPSDefActionRemoveComm9 TLCommunityName, tRPAdminPSDefActionRemoveComm10 TLCommunityName, tRPAdminPSDefActionRemoveComm11 TLCommunityName, tRPAdminPSDefActionRemoveComm12 TLCommunityName, tRPAdminPSDefActionRemoveComm13 TLCommunityName, tRPAdminPSDefActionRemoveComm14 TLCommunityName, tRPAdminPSDefActionRemoveComm15 TLCommunityName, tRPAdminPSDefActionRemoveComm16 TLCommunityName, tRPAdminPSDefActionRemoveComm17 TLCommunityName, tRPAdminPSDefActionRemoveComm18 TLCommunityName, tRPAdminPSDefActionRemoveComm19 TLCommunityName, tRPAdminPSDefActionRemoveComm20 TLCommunityName, tRPAdminPSDefActionRemoveComm21 TLCommunityName, tRPAdminPSDefActionRemoveComm22 TLCommunityName, tRPAdminPSDefActionRemoveComm23 TLCommunityName, tRPAdminPSDefActionRemoveComm24 TLCommunityName, tRPAdminPSDefActionRemoveComm25 TLCommunityName, tRPAdminPSDefActionRemoveComm26 TLCommunityName, tRPAdminPSDefActionRemoveComm27 TLCommunityName, tRPAdminPSDefActionRemoveComm28 TLCommunityName } tRPAdminPSDefActionRemoveComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm1 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 1 } tRPAdminPSDefActionRemoveComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm2 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 2 } tRPAdminPSDefActionRemoveComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm3 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 3 } tRPAdminPSDefActionRemoveComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm4 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 4 } tRPAdminPSDefActionRemoveComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm5 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 5 } tRPAdminPSDefActionRemoveComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm6 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 6 } tRPAdminPSDefActionRemoveComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm7 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 7 } tRPAdminPSDefActionRemoveComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm8 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 8 } tRPAdminPSDefActionRemoveComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm9 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 9 } tRPAdminPSDefActionRemoveComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm10 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 10 } tRPAdminPSDefActionRemoveComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm11 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 11 } tRPAdminPSDefActionRemoveComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm12 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 12 } tRPAdminPSDefActionRemoveComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm13 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 13 } tRPAdminPSDefActionRemoveComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm14 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 14 } tRPAdminPSDefActionRemoveComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm15 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 15 } tRPAdminPSDefActionRemoveComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm16 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 16 } tRPAdminPSDefActionRemoveComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm17 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 17 } tRPAdminPSDefActionRemoveComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm18 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 18 } tRPAdminPSDefActionRemoveComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm19 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 19 } tRPAdminPSDefActionRemoveComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm20 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 20 } tRPAdminPSDefActionRemoveComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm21 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 21 } tRPAdminPSDefActionRemoveComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm22 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 22 } tRPAdminPSDefActionRemoveComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm23 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 23 } tRPAdminPSDefActionRemoveComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm24 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 24 } tRPAdminPSDefActionRemoveComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm25 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 25 } tRPAdminPSDefActionRemoveComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm26 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 26 } tRPAdminPSDefActionRemoveComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm27 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 27 } tRPAdminPSDefActionRemoveComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionRemoveComm28 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRemCommEntry 28 } tRPAdminPSDefActionRepCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSDefActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default community names for a policy statement to replace in routes." ::= { tRPAdminValueObjects 17 } tRPAdminPSDefActionRepCommEntry OBJECT-TYPE SYNTAX TRPAdminPSDefActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information about a particular policy statement. These communities are applied when the default action for the policy statement (tRPAdminPolicyStatementDefaultAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPAdminPSDefaultActionParamsTable is created or deleted." AUGMENTS { tRPAdminPSDefaultActionParamsEntry } ::= { tRPAdminPSDefActionRepCommTable 1 } TRPAdminPSDefActionRepCommEntry ::= SEQUENCE { tRPAdminPSDefActionReplaceComm1 TLCommunityName, tRPAdminPSDefActionReplaceComm2 TLCommunityName, tRPAdminPSDefActionReplaceComm3 TLCommunityName, tRPAdminPSDefActionReplaceComm4 TLCommunityName, tRPAdminPSDefActionReplaceComm5 TLCommunityName, tRPAdminPSDefActionReplaceComm6 TLCommunityName, tRPAdminPSDefActionReplaceComm7 TLCommunityName, tRPAdminPSDefActionReplaceComm8 TLCommunityName, tRPAdminPSDefActionReplaceComm9 TLCommunityName, tRPAdminPSDefActionReplaceComm10 TLCommunityName, tRPAdminPSDefActionReplaceComm11 TLCommunityName, tRPAdminPSDefActionReplaceComm12 TLCommunityName, tRPAdminPSDefActionReplaceComm13 TLCommunityName, tRPAdminPSDefActionReplaceComm14 TLCommunityName, tRPAdminPSDefActionReplaceComm15 TLCommunityName, tRPAdminPSDefActionReplaceComm16 TLCommunityName, tRPAdminPSDefActionReplaceComm17 TLCommunityName, tRPAdminPSDefActionReplaceComm18 TLCommunityName, tRPAdminPSDefActionReplaceComm19 TLCommunityName, tRPAdminPSDefActionReplaceComm20 TLCommunityName, tRPAdminPSDefActionReplaceComm21 TLCommunityName, tRPAdminPSDefActionReplaceComm22 TLCommunityName, tRPAdminPSDefActionReplaceComm23 TLCommunityName, tRPAdminPSDefActionReplaceComm24 TLCommunityName, tRPAdminPSDefActionReplaceComm25 TLCommunityName, tRPAdminPSDefActionReplaceComm26 TLCommunityName, tRPAdminPSDefActionReplaceComm27 TLCommunityName, tRPAdminPSDefActionReplaceComm28 TLCommunityName } tRPAdminPSDefActionReplaceComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm1 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 1 } tRPAdminPSDefActionReplaceComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm2 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 2 } tRPAdminPSDefActionReplaceComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm3 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 3 } tRPAdminPSDefActionReplaceComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm4 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 4 } tRPAdminPSDefActionReplaceComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm5 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 5 } tRPAdminPSDefActionReplaceComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm6 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 6 } tRPAdminPSDefActionReplaceComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm7 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 7 } tRPAdminPSDefActionReplaceComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm8 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 8 } tRPAdminPSDefActionReplaceComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm9 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 9 } tRPAdminPSDefActionReplaceComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm10 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 10 } tRPAdminPSDefActionReplaceComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm11 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 11 } tRPAdminPSDefActionReplaceComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm12 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 12 } tRPAdminPSDefActionReplaceComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm13 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 13 } tRPAdminPSDefActionReplaceComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm14 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 14 } tRPAdminPSDefActionReplaceComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm15 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 15 } tRPAdminPSDefActionReplaceComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm16 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 16 } tRPAdminPSDefActionReplaceComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm17 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 17 } tRPAdminPSDefActionReplaceComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm18 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 18 } tRPAdminPSDefActionReplaceComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm19 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 19 } tRPAdminPSDefActionReplaceComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm20 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 20 } tRPAdminPSDefActionReplaceComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm21 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 21 } tRPAdminPSDefActionReplaceComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm22 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 22 } tRPAdminPSDefActionReplaceComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm23 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 23 } tRPAdminPSDefActionReplaceComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm24 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 24 } tRPAdminPSDefActionReplaceComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm25 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 25 } tRPAdminPSDefActionReplaceComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm26 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 26 } tRPAdminPSDefActionReplaceComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm27 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 27 } tRPAdminPSDefActionReplaceComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActionReplaceComm28 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSDefActionRepCommEntry 28 } tRPAdminPSAccActionAddCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSAccActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community names for a policy statement entry to add to routes." ::= { tRPAdminValueObjects 18 } tRPAdminPSAccActionAddCommEntry OBJECT-TYPE SYNTAX TRPAdminPSAccActionAddCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information about a particular policy statement entry. These communities are applied when the action for the policy statement entry (tRPAdminPSParamsAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPAdminPSAcceptActionParamsTable is created or deleted." AUGMENTS { tRPAdminPSAcceptActionParamsEntry } ::= { tRPAdminPSAccActionAddCommTable 1 } TRPAdminPSAccActionAddCommEntry ::= SEQUENCE { tRPAdminPSAccActionAddComm1 TLCommunityName, tRPAdminPSAccActionAddComm2 TLCommunityName, tRPAdminPSAccActionAddComm3 TLCommunityName, tRPAdminPSAccActionAddComm4 TLCommunityName, tRPAdminPSAccActionAddComm5 TLCommunityName, tRPAdminPSAccActionAddComm6 TLCommunityName, tRPAdminPSAccActionAddComm7 TLCommunityName, tRPAdminPSAccActionAddComm8 TLCommunityName, tRPAdminPSAccActionAddComm9 TLCommunityName, tRPAdminPSAccActionAddComm10 TLCommunityName, tRPAdminPSAccActionAddComm11 TLCommunityName, tRPAdminPSAccActionAddComm12 TLCommunityName, tRPAdminPSAccActionAddComm13 TLCommunityName, tRPAdminPSAccActionAddComm14 TLCommunityName, tRPAdminPSAccActionAddComm15 TLCommunityName, tRPAdminPSAccActionAddComm16 TLCommunityName, tRPAdminPSAccActionAddComm17 TLCommunityName, tRPAdminPSAccActionAddComm18 TLCommunityName, tRPAdminPSAccActionAddComm19 TLCommunityName, tRPAdminPSAccActionAddComm20 TLCommunityName, tRPAdminPSAccActionAddComm21 TLCommunityName, tRPAdminPSAccActionAddComm22 TLCommunityName, tRPAdminPSAccActionAddComm23 TLCommunityName, tRPAdminPSAccActionAddComm24 TLCommunityName, tRPAdminPSAccActionAddComm25 TLCommunityName, tRPAdminPSAccActionAddComm26 TLCommunityName, tRPAdminPSAccActionAddComm27 TLCommunityName, tRPAdminPSAccActionAddComm28 TLCommunityName, tRPAdminPSAccActionAddCommCrOrig TmnxCreateOrigin } tRPAdminPSAccActionAddComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm1 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 1 } tRPAdminPSAccActionAddComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm2 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 2 } tRPAdminPSAccActionAddComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm3 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 3 } tRPAdminPSAccActionAddComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm4 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 4 } tRPAdminPSAccActionAddComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm5 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 5 } tRPAdminPSAccActionAddComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm6 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 6 } tRPAdminPSAccActionAddComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm7 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 7 } tRPAdminPSAccActionAddComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm8 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 8 } tRPAdminPSAccActionAddComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm9 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 9 } tRPAdminPSAccActionAddComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm10 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 10 } tRPAdminPSAccActionAddComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm11 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 11 } tRPAdminPSAccActionAddComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm12 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 12 } tRPAdminPSAccActionAddComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm13 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 13 } tRPAdminPSAccActionAddComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm14 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 14 } tRPAdminPSAccActionAddComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm15 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 15 } tRPAdminPSAccActionAddComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm16 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 16 } tRPAdminPSAccActionAddComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm17 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 17 } tRPAdminPSAccActionAddComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm18 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 18 } tRPAdminPSAccActionAddComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm19 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 19 } tRPAdminPSAccActionAddComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm20 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 20 } tRPAdminPSAccActionAddComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm21 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 21 } tRPAdminPSAccActionAddComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm22 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 22 } tRPAdminPSAccActionAddComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm23 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 23 } tRPAdminPSAccActionAddComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm24 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 24 } tRPAdminPSAccActionAddComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm25 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 25 } tRPAdminPSAccActionAddComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm26 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 26 } tRPAdminPSAccActionAddComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm27 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 27 } tRPAdminPSAccActionAddComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionAddComm28 specifies a community name to add to any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionAddCommEntry 28 } tRPAdminPSAccActionAddCommCrOrig OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPSAccActionAddCommCrOrig indicates the mechanism used to create this entry." ::= { tRPAdminPSAccActionAddCommEntry 29 } tRPAdminPSAccActionRemCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSAccActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community names for a policy statement entry to remove from routes." ::= { tRPAdminValueObjects 19 } tRPAdminPSAccActionRemCommEntry OBJECT-TYPE SYNTAX TRPAdminPSAccActionRemCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information about a particular policy statement entry. These communities are applied when the action for the policy statement entry (tRPAdminPSParamsAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPAdminPSAcceptActionParamsTable is created or deleted." AUGMENTS { tRPAdminPSAcceptActionParamsEntry } ::= { tRPAdminPSAccActionRemCommTable 1 } TRPAdminPSAccActionRemCommEntry ::= SEQUENCE { tRPAdminPSAccActionRemoveComm1 TLCommunityName, tRPAdminPSAccActionRemoveComm2 TLCommunityName, tRPAdminPSAccActionRemoveComm3 TLCommunityName, tRPAdminPSAccActionRemoveComm4 TLCommunityName, tRPAdminPSAccActionRemoveComm5 TLCommunityName, tRPAdminPSAccActionRemoveComm6 TLCommunityName, tRPAdminPSAccActionRemoveComm7 TLCommunityName, tRPAdminPSAccActionRemoveComm8 TLCommunityName, tRPAdminPSAccActionRemoveComm9 TLCommunityName, tRPAdminPSAccActionRemoveComm10 TLCommunityName, tRPAdminPSAccActionRemoveComm11 TLCommunityName, tRPAdminPSAccActionRemoveComm12 TLCommunityName, tRPAdminPSAccActionRemoveComm13 TLCommunityName, tRPAdminPSAccActionRemoveComm14 TLCommunityName, tRPAdminPSAccActionRemoveComm15 TLCommunityName, tRPAdminPSAccActionRemoveComm16 TLCommunityName, tRPAdminPSAccActionRemoveComm17 TLCommunityName, tRPAdminPSAccActionRemoveComm18 TLCommunityName, tRPAdminPSAccActionRemoveComm19 TLCommunityName, tRPAdminPSAccActionRemoveComm20 TLCommunityName, tRPAdminPSAccActionRemoveComm21 TLCommunityName, tRPAdminPSAccActionRemoveComm22 TLCommunityName, tRPAdminPSAccActionRemoveComm23 TLCommunityName, tRPAdminPSAccActionRemoveComm24 TLCommunityName, tRPAdminPSAccActionRemoveComm25 TLCommunityName, tRPAdminPSAccActionRemoveComm26 TLCommunityName, tRPAdminPSAccActionRemoveComm27 TLCommunityName, tRPAdminPSAccActionRemoveComm28 TLCommunityName } tRPAdminPSAccActionRemoveComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm1 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 1 } tRPAdminPSAccActionRemoveComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm2 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 2 } tRPAdminPSAccActionRemoveComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm3 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 3 } tRPAdminPSAccActionRemoveComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm4 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 4 } tRPAdminPSAccActionRemoveComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm5 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 5 } tRPAdminPSAccActionRemoveComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm6 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 6 } tRPAdminPSAccActionRemoveComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm7 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 7 } tRPAdminPSAccActionRemoveComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm8 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 8 } tRPAdminPSAccActionRemoveComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm9 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 9 } tRPAdminPSAccActionRemoveComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm10 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 10 } tRPAdminPSAccActionRemoveComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm11 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 11 } tRPAdminPSAccActionRemoveComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm12 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 12 } tRPAdminPSAccActionRemoveComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm13 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 13 } tRPAdminPSAccActionRemoveComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm14 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 14 } tRPAdminPSAccActionRemoveComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm15 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 15 } tRPAdminPSAccActionRemoveComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm16 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 16 } tRPAdminPSAccActionRemoveComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm17 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 17 } tRPAdminPSAccActionRemoveComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm18 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 18 } tRPAdminPSAccActionRemoveComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm19 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 19 } tRPAdminPSAccActionRemoveComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm20 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 20 } tRPAdminPSAccActionRemoveComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm21 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 21 } tRPAdminPSAccActionRemoveComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm22 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 22 } tRPAdminPSAccActionRemoveComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm23 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 23 } tRPAdminPSAccActionRemoveComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm24 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 24 } tRPAdminPSAccActionRemoveComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm25 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 25 } tRPAdminPSAccActionRemoveComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm26 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 26 } tRPAdminPSAccActionRemoveComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm27 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 27 } tRPAdminPSAccActionRemoveComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionRemoveComm28 specifies a community name to remove from any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRemCommEntry 28 } tRPAdminPSAccActionRepCommTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSAccActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community names for a policy statement entry to replace in routes." ::= { tRPAdminValueObjects 20 } tRPAdminPSAccActionRepCommEntry OBJECT-TYPE SYNTAX TRPAdminPSAccActionRepCommEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information about a particular policy statement entry. These communities are applied when the action for the policy statement entry (tRPAdminPSParamsAction) is 'accept(1)'. Entries are created or deleted when an entry in tRPAdminPSAcceptActionParamsTable is created or deleted." AUGMENTS { tRPAdminPSAcceptActionParamsEntry } ::= { tRPAdminPSAccActionRepCommTable 1 } TRPAdminPSAccActionRepCommEntry ::= SEQUENCE { tRPAdminPSAccActionReplaceComm1 TLCommunityName, tRPAdminPSAccActionReplaceComm2 TLCommunityName, tRPAdminPSAccActionReplaceComm3 TLCommunityName, tRPAdminPSAccActionReplaceComm4 TLCommunityName, tRPAdminPSAccActionReplaceComm5 TLCommunityName, tRPAdminPSAccActionReplaceComm6 TLCommunityName, tRPAdminPSAccActionReplaceComm7 TLCommunityName, tRPAdminPSAccActionReplaceComm8 TLCommunityName, tRPAdminPSAccActionReplaceComm9 TLCommunityName, tRPAdminPSAccActionReplaceComm10 TLCommunityName, tRPAdminPSAccActionReplaceComm11 TLCommunityName, tRPAdminPSAccActionReplaceComm12 TLCommunityName, tRPAdminPSAccActionReplaceComm13 TLCommunityName, tRPAdminPSAccActionReplaceComm14 TLCommunityName, tRPAdminPSAccActionReplaceComm15 TLCommunityName, tRPAdminPSAccActionReplaceComm16 TLCommunityName, tRPAdminPSAccActionReplaceComm17 TLCommunityName, tRPAdminPSAccActionReplaceComm18 TLCommunityName, tRPAdminPSAccActionReplaceComm19 TLCommunityName, tRPAdminPSAccActionReplaceComm20 TLCommunityName, tRPAdminPSAccActionReplaceComm21 TLCommunityName, tRPAdminPSAccActionReplaceComm22 TLCommunityName, tRPAdminPSAccActionReplaceComm23 TLCommunityName, tRPAdminPSAccActionReplaceComm24 TLCommunityName, tRPAdminPSAccActionReplaceComm25 TLCommunityName, tRPAdminPSAccActionReplaceComm26 TLCommunityName, tRPAdminPSAccActionReplaceComm27 TLCommunityName, tRPAdminPSAccActionReplaceComm28 TLCommunityName } tRPAdminPSAccActionReplaceComm1 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm1 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 1 } tRPAdminPSAccActionReplaceComm2 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm2 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 2 } tRPAdminPSAccActionReplaceComm3 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm3 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 3 } tRPAdminPSAccActionReplaceComm4 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm4 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 4 } tRPAdminPSAccActionReplaceComm5 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm5 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 5 } tRPAdminPSAccActionReplaceComm6 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm6 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 6 } tRPAdminPSAccActionReplaceComm7 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm7 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 7 } tRPAdminPSAccActionReplaceComm8 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm8 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 8 } tRPAdminPSAccActionReplaceComm9 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm9 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 9 } tRPAdminPSAccActionReplaceComm10 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm10 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 10 } tRPAdminPSAccActionReplaceComm11 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm11 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 11 } tRPAdminPSAccActionReplaceComm12 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm12 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 12 } tRPAdminPSAccActionReplaceComm13 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm13 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 13 } tRPAdminPSAccActionReplaceComm14 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm14 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 14 } tRPAdminPSAccActionReplaceComm15 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm15 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 15 } tRPAdminPSAccActionReplaceComm16 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm16 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 16 } tRPAdminPSAccActionReplaceComm17 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm17 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 17 } tRPAdminPSAccActionReplaceComm18 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm18 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 18 } tRPAdminPSAccActionReplaceComm19 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm19 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 19 } tRPAdminPSAccActionReplaceComm20 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm20 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 20 } tRPAdminPSAccActionReplaceComm21 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm21 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 21 } tRPAdminPSAccActionReplaceComm22 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm22 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 22 } tRPAdminPSAccActionReplaceComm23 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm23 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 23 } tRPAdminPSAccActionReplaceComm24 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm24 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 24 } tRPAdminPSAccActionReplaceComm25 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm25 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 25 } tRPAdminPSAccActionReplaceComm26 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm26 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 26 } tRPAdminPSAccActionReplaceComm27 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm27 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 27 } tRPAdminPSAccActionReplaceComm28 OBJECT-TYPE SYNTAX TLCommunityName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAccActionReplaceComm28 specifies a community name to replace in any existing community for the route." DEFVAL { "" } ::= { tRPAdminPSAccActionRepCommEntry 28 } tRPAdminPSFromCriteriaExtTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSFromCriteriaExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table of tRPAdminPSFromCriteriaTable to configure extra from filter criteria for each policy statement entry." ::= { tRPAdminValueObjects 21 } tRPAdminPSFromCriteriaExtEntry OBJECT-TYPE SYNTAX TRPAdminPSFromCriteriaExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry from criteria." AUGMENTS { tRPAdminPSFromCriteriaEntry } ::= { tRPAdminPSFromCriteriaExtTable 1 } TRPAdminPSFromCriteriaExtEntry ::= SEQUENCE { tRPAdminPSFromCritExtMvpnType TPolicyEntryCriteriaMvpnType, tRPAdminPSFromCritSrcAddrPfxList TPrefixListName, tRPAdminPSFromCritOrigValidState INTEGER, tRPAdminPSFromCritFlowSrcPfxList TPrefixListName, tRPAdminPSFromCritFlowDstPfxList TPrefixListName, tRPAdminPSFromCritPathType TPolicyCritPathType, tRPAdminPSFromCritASPathLength TPolicyValueOrVarNameOrEmpty, tRPAdminPSFromCritASPathLenInd TPolicyMatchIndicator, tRPAdminPSFromCritASPLenUnique TruthValue, tRPAdminPSFromCritCommunityCount TPolicyValueOrVarNameOrEmpty, tRPAdminPSFromCritCommCountInd TPolicyMatchIndicator, tRPAdminPSFromCritCommCountType TPolicyCritCommunityType, tRPAdminPSFromCritMetric TPolicyValueOrVarNameOrEmpty, tRPAdminPSFromCritMetricInd TPolicyMatchIndicator, tRPAdminPSFromCritLocalPref TPolicyValueOrVarNameOrEmpty, tRPAdminPSFromCritLocalPrefInd TPolicyMatchIndicator, tRPAdminPSFromCritClusterAddrTp1 InetAddressType, tRPAdminPSFromCritClusterAddr1 InetAddress, tRPAdminPSFromCritClusterPfxLen1 InetAddressPrefixLength, tRPAdminPSFromCritClusterAddrTp2 InetAddressType, tRPAdminPSFromCritClusterAddr2 InetAddress, tRPAdminPSFromCritClusterPfxLen2 InetAddressPrefixLength, tRPAdminPSFromCritClusterAddrTp3 InetAddressType, tRPAdminPSFromCritClusterAddr3 InetAddress, tRPAdminPSFromCritClusterPfxLen3 InetAddressPrefixLength, tRPAdminPSFromCritClusterAddrTp4 InetAddressType, tRPAdminPSFromCritClusterAddr4 InetAddress, tRPAdminPSFromCritClusterPfxLen4 InetAddressPrefixLength, tRPAdminPSFromCritClusterAddrTp5 InetAddressType, tRPAdminPSFromCritClusterAddr5 InetAddress, tRPAdminPSFromCritClusterPfxLen5 InetAddressPrefixLength, tRPAdminPSFromCritClusterIdNone TruthValue, tRPAdminPSFromCritNextHopAddrTyp InetAddressType, tRPAdminPSFromCritNextHopAddr InetAddress, tRPAdminPSFromCritNextHopPfxList TPrefixListName, tRPAdminPSFromCritExtEvpnType TPolicyEntryCriteriaEvpnType, tRPAdminPSFromCrAggrContributor TruthValue, tRPAdminPSFromCrEndpointAddrTyp InetAddressType, tRPAdminPSFromCrEndpointAddr InetAddress, tRPAdminPSFromCritColor TNamedItemOrEmpty, tRPAdminPSFromCritDistinguisher TNamedItemOrEmpty } tRPAdminPSFromCritExtMvpnType OBJECT-TYPE SYNTAX TPolicyEntryCriteriaMvpnType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritExtMvpnType specifies the BGP route MVPN type to match on. Set to none(0) to disable." DEFVAL { none } ::= { tRPAdminPSFromCriteriaExtEntry 1 } tRPAdminPSFromCritSrcAddrPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritSrcAddrPfxList contains the name of the source address prefix list to match on. This object can only be set when tRPAdminPSFromCritSrcInetAddr is not configured." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 2 } tRPAdminPSFromCritOrigValidState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), valid (1), notFound (2), invalid (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritOrigValidState specifies the origin validation state criteria for this policy statement." DEFVAL { notApplicable } ::= { tRPAdminPSFromCriteriaExtEntry 3 } tRPAdminPSFromCritFlowSrcPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritFlowSrcPfxList contains the name of the flow-spec source prefix list to match on." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 4 } tRPAdminPSFromCritFlowDstPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritFlowDstPfxList contains the name of the flow-spec destination prefix list to match on." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 5 } tRPAdminPSFromCritPathType OBJECT-TYPE SYNTAX TPolicyCritPathType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPathType specifies the path type to match the BGP route on." DEFVAL { none } ::= { tRPAdminPSFromCriteriaExtEntry 6 } tRPAdminPSFromCritASPathLength OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritASPathLength specifies the number of AS numbers in the AS-Path to match the BGP route on. The tRPAdminPSFromCritASPathLength can be a string containing the AS-Path length in the range [0-255] or a variable name that needs to be resolved to get the AS-Path length." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 7 } tRPAdminPSFromCritASPathLenInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritASPathLenInd specifies whether higher or lower AS-Path lengths are accepted for the tRPAdminPSFromCritASPathLength criteria to match on." DEFVAL { equal } ::= { tRPAdminPSFromCriteriaExtEntry 8 } tRPAdminPSFromCritASPLenUnique OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritASPLenUnique specifies whether only unique AS numbers should be considered for the tRPAdminPSFromCritASPathLength criteria to match on. When the value is true, multiple occurences of the same AS number in the AS-Path count as 1 for calculating the AS-Path length." DEFVAL { false } ::= { tRPAdminPSFromCriteriaExtEntry 9 } tRPAdminPSFromCritCommunityCount OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritCommunityCount specifies the number of BGP communities to match the BGP route on. The tRPAdminPSFromCritCommunityCount can be a string containing the number of communities in the range [0-1024] or a variable name that needs to be resolved to get the community count." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 10 } tRPAdminPSFromCritCommCountInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritCommCountInd specifies whether higher or lower community counts are accepted for the tRPAdminPSFromCritCommunityCount criteria to match on." DEFVAL { equal } ::= { tRPAdminPSFromCriteriaExtEntry 11 } tRPAdminPSFromCritCommCountType OBJECT-TYPE SYNTAX TPolicyCritCommunityType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritCommCountType specifies which communities should be counted for the tRPAdminPSFromCritCommunityCount criteria to match on." DEFVAL { all } ::= { tRPAdminPSFromCriteriaExtEntry 12 } tRPAdminPSFromCritMetric OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritMetric specifies the metric to match the BGP route on. The tRPAdminPSFromCritMetric can be a string containing the metric value in the range [0..4294967295] or a variable name that needs to be resolved to get the metric value." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 13 } tRPAdminPSFromCritMetricInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritMetricInd specifies whether higher or lower metric values are accepted for the tRPAdminPSFromCritMetric criteria to match on." DEFVAL { equal } ::= { tRPAdminPSFromCriteriaExtEntry 14 } tRPAdminPSFromCritLocalPref OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritLocalPref specifies the local preference to match the BGP route on. The tRPAdminPSFromCritLocalPref can be a string containing the local preference value in the range [0..4294967295] or a variable name that needs to be resolved to get the local preference value." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 15 } tRPAdminPSFromCritLocalPrefInd OBJECT-TYPE SYNTAX TPolicyMatchIndicator MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritLocalPrefInd specifies whether higher or lower local preference values are accepted for the tRPAdminPSFromCritLocalPref criteria to match on." DEFVAL { equal } ::= { tRPAdminPSFromCriteriaExtEntry 16 } tRPAdminPSFromCritClusterAddrTp1 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddrTp1 specifies the address type of tRPAdminPSFromCritClusterAddr1." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 17 } tRPAdminPSFromCritClusterAddr1 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddr1 specifies the first IP address encoded within the cluster list attribute to match the BGP route on. The first IP address mask pair is matched against the most recently added cluster id." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 18 } tRPAdminPSFromCritClusterPfxLen1 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterPfxLen1 specifies the length of the first IP address encoded within the cluster list attribute to match the BGP route on." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaExtEntry 19 } tRPAdminPSFromCritClusterAddrTp2 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddrTp2 specifies the address type of tRPAdminPSFromCritClusterAddr2." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 20 } tRPAdminPSFromCritClusterAddr2 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddr2 specifies the second IP address encoded within the cluster list attribute to match the BGP route on. The second IP address mask pair is matched against the second most recent added cluster id." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 21 } tRPAdminPSFromCritClusterPfxLen2 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterPfxLen2 specifies the length of the second IP address encoded within the cluster list attribute to match the BGP route on." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaExtEntry 22 } tRPAdminPSFromCritClusterAddrTp3 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddrTp3 specifies the address type of tRPAdminPSFromCritClusterAddr3." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 23 } tRPAdminPSFromCritClusterAddr3 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddr3 specifies the third IP address encoded within the cluster list attribute to match the BGP route on. The third IP address mask pair is matched against the third most recent added cluster id." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 24 } tRPAdminPSFromCritClusterPfxLen3 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterPfxLen3 specifies the length of the third IP address encoded within the cluster list attribute to match the BGP route on." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaExtEntry 25 } tRPAdminPSFromCritClusterAddrTp4 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddrTp4 specifies the address type of tRPAdminPSFromCritClusterAddr4." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 26 } tRPAdminPSFromCritClusterAddr4 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddr4 specifies the fourth IP address encoded within the cluster list attribute to match the BGP route on. The fourth IP address mask pair is matched against the fourth most recent added cluster id." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 27 } tRPAdminPSFromCritClusterPfxLen4 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterPfxLen4 specifies the length of the fourth IP address encoded within the cluster list attribute to match the BGP route on." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaExtEntry 28 } tRPAdminPSFromCritClusterAddrTp5 OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddrTp5 specifies the address type of tRPAdminPSFromCritClusterAddr5." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 29 } tRPAdminPSFromCritClusterAddr5 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterAddr5 specifies the fifth IP address encoded within the cluster list attribute to match the BGP route on. The fifth IP address mask pair is matched against the fifth most recent added cluster id." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 30 } tRPAdminPSFromCritClusterPfxLen5 OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterPfxLen5 specifies the length of the fifth IP address encoded within the cluster list attribute to match the BGP route on." DEFVAL { 0 } ::= { tRPAdminPSFromCriteriaExtEntry 31 } tRPAdminPSFromCritClusterIdNone OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritClusterIdNone specifies whether only routes without any cluster list attribute should be matched on. When tRPAdminPSFromCritClusterIdNone is set to true, only routes without any cluster list attribute are matched. The cluster id none criteria is ignored when a cluster id IP address criteria is configured." DEFVAL { false } ::= { tRPAdminPSFromCriteriaExtEntry 32 } tRPAdminPSFromCritNextHopAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNextHopAddrTyp specifies the address type of tRPAdminPSFromCritNextHopAddr." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 33 } tRPAdminPSFromCritNextHopAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNextHopAddr specifies the next-hop IP address to match the BGP route on." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 34 } tRPAdminPSFromCritNextHopPfxList OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritNextHopPfxList specifies the next-hop prefix list to match the BGP route on. The next-hop prefix list criteria is ignored when a next-hop IP address criteria is configured in object tRPAdminPSFromCritNextHopAddr." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 35 } tRPAdminPSFromCritExtEvpnType OBJECT-TYPE SYNTAX TPolicyEntryCriteriaEvpnType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritExtEvpnType specifies the BGP route EVPN type to match on. Set to none(0) to disable." DEFVAL { none } ::= { tRPAdminPSFromCriteriaExtEntry 37 } tRPAdminPSFromCrAggrContributor OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCrAggrContributor specifies whether aggregate contributor routes should be matched on. When the value is 'true', only the more-specific prefixes that are actually contributors are matched." DEFVAL { false } ::= { tRPAdminPSFromCriteriaExtEntry 38 } tRPAdminPSFromCrEndpointAddrTyp OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCrEndpointAddrTyp specifies the address type of tRPAdminPSFromCrEndpointAddr." DEFVAL { unknown } ::= { tRPAdminPSFromCriteriaExtEntry 39 } tRPAdminPSFromCrEndpointAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCrEndpointAddr specifies the SR policy endpoint IP address to match the route on. This match criterion is only used in import policies." DEFVAL { ''H } ::= { tRPAdminPSFromCriteriaExtEntry 40 } tRPAdminPSFromCritColor OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritColor specifies the SR policy color ID to match the route on. The value of this object can be a string containing the SR policy color ID value in the range [0..4294967295]. An empty string means that it is disabled. This match criterion is only used in import policies." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 41 } tRPAdminPSFromCritDistinguisher OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritDistinguisher specifies the SR policy distinguisher to match the route on. The value of this object can be a string containing the SR policy distinguisher value in the range [0..4294967295]. An empty string means that it is disabled. This match criterion is only used in import policies." DEFVAL { "" } ::= { tRPAdminPSFromCriteriaExtEntry 42 } tRPAdminPSPolicyVariableTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSPolicyVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information to resolve variables used in tRPAdminPSFromCriteriaTable." ::= { tRPAdminValueObjects 22 } tRPAdminPSPolicyVariableEntry OBJECT-TYPE SYNTAX TRPAdminPSPolicyVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maps a variable to a name for the corresponding entry in tRPAdminPSFromCriteriaEntry if tRPAdminPSFromCriteriaPolicy refers to a policy statement that uses variables in its tRPAdminPSFromCriteriaTable, tRPAdminPSAcceptActionParamsTable, tRPAdminPSDefaultActionParamsTable, tRPAdminPSAcptActParamsExtTable or tRPAdminPSDefActParamsExtTable entries." INDEX { tRPAdminPolicyStatementName, tRPAdminPSFromCriteriaIndex, tRPAdminPSPolicyVarName } ::= { tRPAdminPSPolicyVariableTable 1 } TRPAdminPSPolicyVariableEntry ::= SEQUENCE { tRPAdminPSPolicyVarName TPolicyVariableName, tRPAdminPSPolicyVarRowStatus RowStatus, tRPAdminPSPolicyVarValue TNamedItemOrEmpty, tRPAdminPSPolicyVarNumber Integer32, tRPAdminPSPolicyVarType TPolicyVariableType, tRPAdminPSPolicyVarAddressType InetAddressType, tRPAdminPSPolicyVarAddress InetAddress, tRPAdminPSPolicyVarDecimal TPolicyDecimal } tRPAdminPSPolicyVarName OBJECT-TYPE SYNTAX TPolicyVariableName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarName specifies a variable name used in the tRPAdminPSFromCriteriaTable, tRPAdminPSAcceptActionParamsTable, tRPAdminPSDefaultActionParamsTable, tRPAdminPSAcptActParamsExtTable or tRPAdminPSDefActParamsExtTable entry defined by tRPAdminPSFromCriteriaPolicy. That entry uses this string as value for tAS-path, AS-path-group, prefix list, community or damping objects." ::= { tRPAdminPSPolicyVariableEntry 1 } tRPAdminPSPolicyVarRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarRowStatus specifies the RowStatus for this row." ::= { tRPAdminPSPolicyVariableEntry 2 } tRPAdminPSPolicyVarValue OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarValue specifies the actual as-path name, as-path group name, prefix list name or community name to which tRPAdminPSPolicyVarName is resolved. This object tRPAdminPSPolicyVarValue is ignored when the object tRPAdminPSPolicyVarType has a value different then string(1)." DEFVAL { ''H } ::= { tRPAdminPSPolicyVariableEntry 3 } tRPAdminPSPolicyVarNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarNumber specifies the actual aigp metric value, as-path prepend value, local preference value, metric value or next-hop value to which tRPAdminPSPolicyVarName is resolved. This object tRPAdminPSPolicyVarNumber is ignored when the object tRPAdminPSPolicyVarType has a value different then integer(2)." DEFVAL { 0 } ::= { tRPAdminPSPolicyVariableEntry 4 } tRPAdminPSPolicyVarType OBJECT-TYPE SYNTAX TPolicyVariableType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarType specifies how to resolve the tRPAdminPSPolicyVarName. string(1) - indicates that tRPAdminPSPolicyVarValue is to be used integer(2) - indicates that tRPAdminPSPolicyVarNumber is to be used address(3) - indicates that tRPAdminPSPolicyVarAddressType and tRPAdminPSPolicyVarAddress are to be used decimal(4) - indicates that tRPAdminPSPolicyVarDecimal is to be used" DEFVAL { string } ::= { tRPAdminPSPolicyVariableEntry 5 } tRPAdminPSPolicyVarAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarAddressType specifies the actual IP address type of the tRPAdminPSPolicyVarAddress to which tRPAdminPSPolicyVarName is resolved. This object tRPAdminPSPolicyVarAddressType is ignored when the object tRPAdminPSPolicyVarType has a value different then address(3)." DEFVAL { unknown } ::= { tRPAdminPSPolicyVariableEntry 6 } tRPAdminPSPolicyVarAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarAddress specifies the actual next-hop address to which tRPAdminPSPolicyVarName is resolved. This object tRPAdminPSPolicyVarAddress is ignored when the object tRPAdminPSPolicyVarType has a value different from address(3)." DEFVAL { ''H } ::= { tRPAdminPSPolicyVariableEntry 7 } tRPAdminPSPolicyVarDecimal OBJECT-TYPE SYNTAX TPolicyDecimal MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSPolicyVarDecimal specifies the actual decimal value to which tRPAdminPSPolicyVarName is resolved. This object tRPAdminPSPolicyVarDecimal is ignored when the object tRPAdminPSPolicyVarType has a value different then decimal(4)." DEFVAL { "0" } ::= { tRPAdminPSPolicyVariableEntry 8 } tRPAdminPSAcptActParamsExtTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSAcptActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table of tRPAdminPSAcceptActionParamsTable containing extra accept-action parameters for each policy statement entry." ::= { tRPAdminValueObjects 23 } tRPAdminPSAcptActParamsExtEntry OBJECT-TYPE SYNTAX TRPAdminPSAcptActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Accept-action information for a policy statement entry." AUGMENTS { tRPAdminPSAcceptActionParamsEntry } ::= { tRPAdminPSAcptActParamsExtTable 1 } TRPAdminPSAcptActParamsExtEntry ::= SEQUENCE { tRPAdminPSAcptActStickyEcmp TruthValue, tRPAdminPSAcptActAddPathSndLimit TPolicyAddPathSendLimit, tRPAdminPSAcptActInstBackupPath TruthValue, tRPAdminPSAcptActAdvertiseLabel TPolicyAdvertiseLabelMode, tRPAdminPSAcptActBgpLeaking TruthValue, tRPAdminPSAcptActAigpMetricSrc TPolicyActionSource, tRPAdminPSAcptActAigpMetricParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActASPathPendSrc TPolicyActionSource, tRPAdminPSAcptActASPathPendParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActLocalPrefSource TPolicyActionSource, tRPAdminPSAcptActLocalPrefParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActMetricParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActNextHopSource TPolicyActionSource, tRPAdminPSAcptActNextHopParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActOriginSource TPolicyActionSource, tRPAdminPSAcptActOriginParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActOrigValStateSrc TPolicyActionSource, tRPAdminPSAcptActOrigValStatePar TPolicyVariableNameOrEmpty, tRPAdminPSAcptActPreferenceSrc TPolicyActionSource, tRPAdminPSAcptActPreferenceParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActTagSource TPolicyActionSource, tRPAdminPSAcptActTagParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActOspfTypeSource TPolicyActionSource, tRPAdminPSAcptActOspfTypeParam TPolicyVariableNameOrEmpty, tRPAdminPSAcptActASPPendCountSrc TPolicyActionSource, tRPAdminPSAcptActASPPendCountPar TPolicyVariableNameOrEmpty, tRPAdminPSAcptActASPPndMstRecent TruthValue, tRPAdminPSAcptActCreateUdpTunnel TruthValue, tRPAdminPSAcptActResolveStatic TruthValue, tRPAdminPSAcptActAdminTagPolicy TPolicyAdminTagPolicyOrVarName, tRPAdminPSAcptActBgpMedSource TPolicyBgpMedSource, tRPAdminPSAcptActBgpMedValue TPolicyValueOrVarNameOrEmpty, tRPAdminPSAcptActBgpMedExpr TPolicyBgpMedExpression, tRPAdminPSAcptActDisableRtInst TruthValue, tRPAdminPSAcptActSrLabelIndex TPolicyValueOrVarNameOrEmpty, tRPAdminPSAcptActSrLblIndPrefIgp TruthValue, tRPAdminPSAcptActNextHopPeerAddr TruthValue, tRPAdminPSAcptActBgpHighPriority TruthValue, tRPAdminPSAcptActFlexAlgo TPolicyValueOrVarNameOrEmpty, tRPAdminPSAcptActBgpTunnelMetric TPolicyValueOrVarNameOrEmpty, tRPAdminPSAcptActBgpTMetPrefAigp TruthValue, tRPAdminPSAcptActEgressStats TruthValue, tRPAdminPSAcptActIngressStats TruthValue, tRPAdminPSAcptActSrMaintPolicy TNamedItemOrEmpty } tRPAdminPSAcptActStickyEcmp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActStickyEcmp specifies whether to apply sticky ECMP hash to the route or not. When the value of tRPAdminPSAcptActStickyEcmp is true and one or more of the multiple ECMP next-hops go down, then the unaffected traffic flows continues to be hashed to the same next-hops as prior to the failures; the affected traffic flows are redistributed as evenly as possible to the remaining next-hops." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 1 } tRPAdminPSAcptActAddPathSndLimit OBJECT-TYPE SYNTAX TPolicyAddPathSendLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActAddPathSndLimit specifies the admin ADD-PATH send limit for this policy statement." DEFVAL { 0 } ::= { tRPAdminPSAcptActParamsExtEntry 2 } tRPAdminPSAcptActInstBackupPath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActInstBackupPath specifies whether the installation of a backup path is desired for the route matching this entry." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 3 } tRPAdminPSAcptActAdvertiseLabel OBJECT-TYPE SYNTAX TPolicyAdvertiseLabelMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActAdvertiseLabel specifies the advertisement label mode for the route matching this entry." DEFVAL { none } ::= { tRPAdminPSAcptActParamsExtEntry 4 } tRPAdminPSAcptActBgpLeaking OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpLeaking specifies whether to apply BGP leaking to the route or not. When the value of tRPAdminPSAcptActBgpLeaking is true, the BGP route is leaked into a VPRN according to the user configured policies." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 5 } tRPAdminPSAcptActAigpMetricSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActAigpMetricSrc specifies the source of the accept action AIGP (Accumulated IGP) metric. The value 'actionValue(1)' means the AIGP metric value is the value of tRPAdminPSAcptActnAigpMetricVal; the value of the object tRPAdminPSAcptActAigpMetricParam is ignored. The value 'actionParam(2) means the AIGP metric value is derived from the object tRPAdminPSAcptActAigpMetricParam; the value of the object tRPAdminPSAcptActnAigpMetricVal is ignored. When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActAigpMetricSrc is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 6 } tRPAdminPSAcptActAigpMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActAigpMetricParam specifies the variable name that must be resolved to get the value to be added or set for the route AIGP(Accumulated IGP) metric. The value of this object tRPAdminPSAcptActAigpMetricParam is ignored when the object tRPAdminPSAcptActAigpMetricSrc has a value different from actionParam(2). When the value of tRPAdminPSAcptActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSAcptActAigpMetricParam is ignored." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 7 } tRPAdminPSAcptActASPathPendSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActASPathPendSrc specifies the source of the accept action AS Path prepend. The value 'actionValue(1)' means the AS Path prepend value is the value of tRPAdminPSAcceptActionASPathPend; the value of the object tRPAdminPSAcptActASPathPendParam is ignored. The value 'actionParam(2) means the AS Path prepend value is derived from the object tRPAdminPSAcptActASPathPendParam; the value of the object tRPAdminPSAcceptActionASPathPend is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 8 } tRPAdminPSAcptActASPathPendParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActASPathPendParam specifies the variable name that must be resolved to get the AS Number to prepend to the AS-Path attribute of the route. The value of this object tRPAdminPSAcptActASPathPendParam is ignored when the object tRPAdminPSAcptActASPathPendSrc has a value different from actionParam(2). The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPAdminPSAcceptActionASPathPrependCount is zero and tRPAdminPSAcptActASPPendCountSrc is set to actionValue(1)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 9 } tRPAdminPSAcptActLocalPrefSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActLocalPrefSource specifies the source of the accept action local preference. The value 'actionValue(1)' means the local preference value is the value of tRPAdminPSAcceptActionLocalPreference; the value of the object tRPAdminPSAcptActLocalPrefParam is ignored. The value 'actionParam(2) means the local preference value is derived from the object tRPAdminPSAcptActLocalPrefParam; the value of the object tRPAdminPSAcceptActionLocalPreference is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 10 } tRPAdminPSAcptActLocalPrefParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActLocalPrefParam specifies the variable name that must be resolved to get the local preference for the route. The value of this object tRPAdminPSAcptActLocalPrefParam is ignored when the object tRPAdminPSAcptActLocalPrefSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 11 } tRPAdminPSAcptActMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActMetricParam specifies the variable name that must be resolved to get the metric value for the route. The value of this object tRPAdminPSAcptActMetricParam is ignored when the object tRPAdminPSAcptActnMetricSource has a value different from metricParam(3)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 12 } tRPAdminPSAcptActNextHopSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActNextHopSource specifies the source of the accept action next-hop. The value 'actionValue(1)' means the next-hop address is the value of tRPAdminPSAcptActInetNextHop and the address type is defined by tRPAdminPSAcptActInetNextHopType; the value of the object tRPAdminPSAcptActNextHopParam is ignored. The value 'actionParam(2) means the next-hop value is derived from the object tRPAdminPSAcptActNextHopParam; the value of the object tRPAdminPSAcptActInetNextHop and tRPAdminPSAcptActInetNextHopType are ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 13 } tRPAdminPSAcptActNextHopParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActNextHopParam specifies the variable name that must be resolved to get the next-hop IP address in the route. The value of this object tRPAdminPSAcptActNextHopParam is ignored when the object tRPAdminPSAcptActNextHopSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 14 } tRPAdminPSAcptActOriginSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActOriginSource specifies the source of the route origin accept action. The value 'actionValue(1)' means the origin is the value of tRPAdminPSAcceptActionOrigin; the value of the object tRPAdminPSAcptActOriginParam is ignored. The value 'actionParam(2) means the origin value is derived from the object tRPAdminPSAcptActOriginParam; the value of the object tRPAdminPSAcceptActionOrigin is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 15 } tRPAdminPSAcptActOriginParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActOriginParam specifies the variable name that must be resolved to get the origin of the route exported into BGP if it does not match an entry. The value of this object tRPAdminPSAcptActOriginParam is ignored when the object tRPAdminPSAcptActOriginSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 16 } tRPAdminPSAcptActOrigValStateSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActOrigValStateSrc specifies the source of the origin validation state. The value 'actionValue(1)' means the origin validation state is the value of tRPAdminPSAcptActnOrigValidState; the value of the object tRPAdminPSAcptActOrigValStatePar is ignored. The value 'actionParam(2) means the origin validation state value is derived from the object tRPAdminPSAcptActOrigValStatePar; the value of the object tRPAdminPSAcptActnOrigValidState is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 17 } tRPAdminPSAcptActOrigValStatePar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActOrigValStatePar specifies the variable name that must be resolved to get the origin validation state. The value of this object tRPAdminPSAcptActOrigValStatePar is ignored when the object tRPAdminPSAcptActOrigValStateSrc has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 18 } tRPAdminPSAcptActPreferenceSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActPreferenceSrc specifies the source of the preference accept action. The value 'actionValue(1)' means the preference is the value of tRPAdminPSAcceptActionPreference; the value of the object tRPAdminPSAcptActPreferenceParam is ignored. The value 'actionParam(2) means the preference value is derived from the object tRPAdminPSAcptActPreferenceParam; the value of the object tRPAdminPSAcceptActionPreference is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 19 } tRPAdminPSAcptActPreferenceParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActPreferenceParam specifies the variable name that must be resolved to get the preference. The value of this object tRPAdminPSAcptActPreferenceParam is ignored when the object tRPAdminPSAcptActPreferenceSrc has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 20 } tRPAdminPSAcptActTagSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActTagSource specifies the source of the tag accept action. The value 'actionValue(1)' means the tag is the value of tRPAdminPSAcceptActionTag; the value of the object tRPAdminPSAcptActTagParam is ignored. The value 'actionParam(2) means the tag value is derived from the object tRPAdminPSAcptActTagParam; the value of the object tRPAdminPSAcceptActionTag is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 21 } tRPAdminPSAcptActTagParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActTagParam specifies the variable name that must be resolved to get the tag for the route. The value of this object tRPAdminPSAcptActTagParam is ignored when the object tRPAdminPSAcptActTagSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 22 } tRPAdminPSAcptActOspfTypeSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActOspfTypeSource specifies the source of the OSPF route type accept action. The value 'actionValue(1)' means the OSPF route type is the value of tRPAdminPSAcceptActionOspfType; the value of the object tRPAdminPSAcptActOspfTypeParam is ignored. The value 'actionParam(2) means the OSPF route type value is derived from the object tRPAdminPSAcptActOspfTypeParam; the value of the object tRPAdminPSAcceptActionOspfType is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 23 } tRPAdminPSAcptActOspfTypeParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActOspfTypeParam specifies the variable name that must be resolved to get the OSPF route type to set in route. The value of this object tRPAdminPSAcptActOspfTypeParam is ignored when the object tRPAdminPSAcptActOspfTypeSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 24 } tRPAdminPSAcptActASPPendCountSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActASPPendCountSrc specifies the source of the accept action AS Path prepend repeat count. The value 'actionValue(1)' means the AS Path prepend count is the value of tRPAdminPSAcceptActionASPathPrependCount; the value of the object tRPAdminPSAcptActASPPendCountPar is ignored. The value 'actionParam(2) means the AS Path prepend count is derived from the object tRPAdminPSAcptActASPPendCountPar; the value of the object tRPAdminPSAcceptActionASPathPrependCount is ignored." DEFVAL { actionValue } ::= { tRPAdminPSAcptActParamsExtEntry 26 } tRPAdminPSAcptActASPPendCountPar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActASPPendCountPar specifies the variable name that must be resolved to get the number of times to prepend the AS number to the AS-Path attribute of the route. The value of this object is ignored when the object tRPAdminPSAcptActASPPendCountSrc has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 27 } tRPAdminPSAcptActASPPndMstRecent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActASPPndMstRecent specifies whether the most recent AS number must be prepended to the AS-Path attribute of the route. When the value of tRPAdminPSAcptActASPPndMstRecent is true the last (most recent) ASN in the AS path is used to prepend to the AS-Path; tRPAdminPSAcceptActionASPathPend and tRPAdminPSAcptActASPathPendParam are ignored." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 28 } tRPAdminPSAcptActCreateUdpTunnel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActCreateUdpTunnel specifies whether a UDP tunnel must be instantiated for the route matching this entry." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 29 } tRPAdminPSAcptActResolveStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActResolveStatic specifies whether the BGP next-hop for the route matching this entry is the resolved next-hop of the static route. This object has only effect in BGP export policies and applies only to BGP routes created by exporting static routes with indirect next-hops. When the value of tRPAdminPSAcptActResolveStatic is true, the BGP next-hop is the resolved next-hop of the static route. When the value is false, the BGP next-hop is copied from the indirect next-hop." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 30 } tRPAdminPSAcptActAdminTagPolicy OBJECT-TYPE SYNTAX TPolicyAdminTagPolicyOrVarName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActAdminTagPolicy specifies the administrative tag policy for the route matching this entry. The tRPAdminPSAcptActAdminTagPolicy can be a string containing the administrative tag policy or a variable name that needs to be resolved to get the administrative tag policy. The internal colour value assigned to the tag is associated with the route. If one or more tags are specified in the policy in an include/exclude, then the internal colours associated with those tags are assigned to the include/exclude list. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 31 } tRPAdminPSAcptActBgpMedSource OBJECT-TYPE SYNTAX TPolicyBgpMedSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpMedSource specifies the source to resolve to get the BGP MED value. When the value is 'igp', the BGP MED value is set to the IGP cost of the route or tunnel that resolves the BGP next-hop of the received BGP route. When the value is 'minIgp', the BGP MED value is set to the minimum IGP cost; i.e. if the cost of the resolving route or tunnel increases the advertised MED is not changed. When the value is 'medValue', the BGP MED value is set to the value of tRPAdminPSAcptActBgpMedValue. When the value is 'expression', the BGP MED value is set based on a calculation of the provided expression in tRPAdminPSAcptActBgpMedExpr." DEFVAL { none } ::= { tRPAdminPSAcptActParamsExtEntry 32 } tRPAdminPSAcptActBgpMedValue OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpMedValue specifies the the BGP MED value. The value of this object can be a string containing the BGP MED value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP MED value. The value of this object is ignored when the object tRPAdminPSAcptActBgpMedSource has a value different from 'medValue'." DEFVAL { "" } ::= { tRPAdminPSAcptActParamsExtEntry 33 } tRPAdminPSAcptActBgpMedExpr OBJECT-TYPE SYNTAX TPolicyBgpMedExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpMedExpr specifies the expression that is used to calculate the BGP MED value. The value of this object is ignored when the object tRPAdminPSAcptActBgpMedSource has a value different from 'expression'." DEFVAL { "" } ::= { tRPAdminPSAcptActParamsExtEntry 34 } tRPAdminPSAcptActDisableRtInst OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActDisableRtInst specifies whether to disable the installation of a BGP route in the Routing Table and the Forwarding Information Base (FIB)." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 35 } tRPAdminPSAcptActSrLabelIndex OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActSrLabelIndex specifies the the Segment Routing (SR) Label Index value. The value of this object can be a string containing the SR label Index value in the range [1..524287] or a variable name that needs to be resolved to get the SR Label Index." DEFVAL { "" } ::= { tRPAdminPSAcptActParamsExtEntry 36 } tRPAdminPSAcptActSrLblIndPrefIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActSrLblIndPrefIgp specifies whether it is preferred to use the SR Label Index from the IGP route. When the value is 'true', BGP will use the SR Label Index form the IGP route when present else it will use the value from tRPAdminPSAcptActSrLabelIndex. When the value is 'false', BGP will always use the tRPAdminPSAcptActSrLabelIndex. The value of this object is ignored when the object tRPAdminPSAcptActSrLabelIndex is empty." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 37 } tRPAdminPSAcptActNextHopPeerAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActNextHopPeerAddr specifies whether the next-hop must be set to the peer address. This object cannot be set to 'true' at the same time as setting the other next-hop objects to a non-default value. When this object is set to 'true' then tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSAcptActNextHopSource and tRPAdminPSAcptActNextHopParam objects are reset." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 38 } tRPAdminPSAcptActBgpHighPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpHighPriority specifies whether the corresponding prefix must be marked in BGP as needing high priority treatment." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 39 } tRPAdminPSAcptActFlexAlgo OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActFlexAlgo specifies the identifier of the Flexible Algorithm. The value of this object can be a string containing the Flex Algo Id value in the range [128..255] or a variable name that needs to be resolved to get the Flex Algo Id." DEFVAL { "" } ::= { tRPAdminPSAcptActParamsExtEntry 40 } tRPAdminPSAcptActBgpTunnelMetric OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpTunnelMetric specifies the the BGP Tunnel Metric value. The value of this object can be a string containing the BGP Tunnel Metric value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP Tunnel Metric." DEFVAL { "" } ::= { tRPAdminPSAcptActParamsExtEntry 41 } tRPAdminPSAcptActBgpTMetPrefAigp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActBgpTMetPrefAigp specifies whether it is preferred to use the value of the received AIGP attribute as BGP Tunnel Metric. If the value is 'true', the TTM metric is set to the value of the AIGP attribute if attached. If an AIGP metric is not attached or if the value is 'false', the tRPAdminPSAcptActBgpTunnelMetric is set as TTM metric. The value of this object is ignored if the object tRPAdminPSAcptActBgpTunnelMetric is empty." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 42 } tRPAdminPSAcptActEgressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActEgressStats specifies whether to collect egress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 43 } tRPAdminPSAcptActIngressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActIngressStats specifies whether to collect ingress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." DEFVAL { false } ::= { tRPAdminPSAcptActParamsExtEntry 44 } tRPAdminPSAcptActSrMaintPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSAcptActSrMaintPolicy specifies the named segment routing (SR) maintenance policy for SR policy routes. The maintenance policy must exist in TIMETRA-SR-POLICY-MIB::vRtrSrMainPlcyTable. The value of this object can be a string containing the maintenance policy or a variable name that needs to be resolved to get the maintenance policy. An empty string means that is disabled." DEFVAL { ''H } ::= { tRPAdminPSAcptActParamsExtEntry 45 } tRPAdminPSDefActParamsExtTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSDefActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table of tRPAdminPSDefaultActionParamsTable containing extra default action parameters for each policy statement entry." ::= { tRPAdminValueObjects 24 } tRPAdminPSDefActParamsExtEntry OBJECT-TYPE SYNTAX TRPAdminPSDefActParamsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default action information for a policy statement entry." AUGMENTS { tRPAdminPSDefaultActionParamsEntry } ::= { tRPAdminPSDefActParamsExtTable 1 } TRPAdminPSDefActParamsExtEntry ::= SEQUENCE { tRPAdminPSDefActStickyEcmp TruthValue, tRPAdminPSDefActAddPathSendLimit TPolicyAddPathSendLimit, tRPAdminPSDefActInstBackupPath TruthValue, tRPAdminPSDefActAdvertiseLabel TPolicyAdvertiseLabelMode, tRPAdminPSDefActBgpLeaking TruthValue, tRPAdminPSDefActAigpMetricSource TPolicyActionSource, tRPAdminPSDefActAigpMetricParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActASPathPendSource TPolicyActionSource, tRPAdminPSDefActASPathPendParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActLocalPrefSource TPolicyActionSource, tRPAdminPSDefActLocalPrefParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActMetricParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActNextHopSource TPolicyActionSource, tRPAdminPSDefActNextHopParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActOriginSource TPolicyActionSource, tRPAdminPSDefActOriginParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActOrigValStateSrc TPolicyActionSource, tRPAdminPSDefActOrigValStatePar TPolicyVariableNameOrEmpty, tRPAdminPSDefActPreferenceSource TPolicyActionSource, tRPAdminPSDefActPreferenceParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActTagSource TPolicyActionSource, tRPAdminPSDefActTagParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActOspfTypeSource TPolicyActionSource, tRPAdminPSDefActOspfTypeParam TPolicyVariableNameOrEmpty, tRPAdminPSDefActASPPendCountSrc TPolicyActionSource, tRPAdminPSDefActASPPendCountPar TPolicyVariableNameOrEmpty, tRPAdminPSDefActASPPndMstRecent TruthValue, tRPAdminPSDefActCreateUdpTunnel TruthValue, tRPAdminPSDefActResolveStatic TruthValue, tRPAdminPSDefActAdminTagPolicy TPolicyAdminTagPolicyOrVarName, tRPAdminPSDefActBgpMedSource TPolicyBgpMedSource, tRPAdminPSDefActBgpMedValue TPolicyValueOrVarNameOrEmpty, tRPAdminPSDefActBgpMedExpr TPolicyBgpMedExpression, tRPAdminPSDefActDisableRtInstall TruthValue, tRPAdminPSDefActSrLabelIndex TPolicyValueOrVarNameOrEmpty, tRPAdminPSDefActSrLblIndPrefIgp TruthValue, tRPAdminPSDefActNextHopPeerAddr TruthValue, tRPAdminPSDefActBgpHighPriority TruthValue, tRPAdminPSDefActFlexAlgo TPolicyValueOrVarNameOrEmpty, tRPAdminPSDefActBgpTunnelMetric TPolicyValueOrVarNameOrEmpty, tRPAdminPSDefActBgpTMetPrefAigp TruthValue, tRPAdminPSDefActEgressStats TruthValue, tRPAdminPSDefActIngressStats TruthValue, tRPAdminPSDefActSrMaintPolicy TNamedItemOrEmpty } tRPAdminPSDefActStickyEcmp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActStickyEcmp specifies whether sticky ECMP hash has to be applied to the route. When the value of tRPAdminPSDefActStickyEcmp is true and one or more of the multiple ECMP next-hops go down, then the unaffected traffic flows continues to be hashed to the same next-hops as prior to the failures; the affected traffic flows are redistributed as evenly as possible to the remaining next-hops." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 1 } tRPAdminPSDefActAddPathSendLimit OBJECT-TYPE SYNTAX TPolicyAddPathSendLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActAddPathSendLimit specifies the default ADD-PATH send limit for this policy statement." DEFVAL { 0 } ::= { tRPAdminPSDefActParamsExtEntry 2 } tRPAdminPSDefActInstBackupPath OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActInstBackupPath specifies whether the installation of a backup path is desired for the route matching this entry." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 3 } tRPAdminPSDefActAdvertiseLabel OBJECT-TYPE SYNTAX TPolicyAdvertiseLabelMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActAdvertiseLabel specifies the advertisement label mode for the route matching this entry." DEFVAL { none } ::= { tRPAdminPSDefActParamsExtEntry 4 } tRPAdminPSDefActBgpLeaking OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpLeaking specifies whether BGP leaking has to be applied to the route. When the value of tRPAdminPSDefActBgpLeaking is true, the BGP route is leaked into a VPRN according to the user configured policies." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 5 } tRPAdminPSDefActAigpMetricSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActAigpMetricSource specifies the source of the accept action AIGP (Accumulated IGP) metric. The value 'actionValue(1)' means the AIGP metric value is the value of tRPAdminPSDefActnAigpMetricVal; the value of the object tRPAdminPSDefActAigpMetricParam is ignored. The value 'actionParam(2) means the AIGP metric value is derived from the object tRPAdminPSDefActAigpMetricParam; the value of the object tRPAdminPSDefActnAigpMetricVal is ignored. When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActAigpMetricSource is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 6 } tRPAdminPSDefActAigpMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActAigpMetricParam specifies the variable name that must be resolved to get the value to be added or set for the route AIGP(Accumulated IGP) metric. The value of this object tRPAdminPSDefActAigpMetricParam is ignored when the object tRPAdminPSDefActAigpMetricSource has a value different from actionParam(2). When the value of tRPAdminPSDefActionAigpMetric is set to 'none(1)' or 'useIgp(4)', the value of tRPAdminPSDefActAigpMetricParam is ignored." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 7 } tRPAdminPSDefActASPathPendSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActASPathPendSource specifies the source of the default action AS Path prepend. The value 'actionValue(1)' means the AS Path prepend value is the value of tRPAdminPSDefaultActionASPathPnd; the value of the object tRPAdminPSDefActASPathPendParam is ignored. The value 'actionParam(2) means the AS Path prepend value is derived from the object tRPAdminPSDefActASPathPendParam; the value of the object tRPAdminPSDefaultActionASPathPnd is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 8 } tRPAdminPSDefActASPathPendParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActASPathPendParam specifies the variable name that must be resolved to get the AS Number to prepend to the AS-Path attribute of the route. The value of this object tRPAdminPSDefActASPathPendParam is ignored when the object tRPAdminPSDefActASPathPendSource has a value different from actionParam(2). The AS-Path prepending is disabled when the repeat count is set to zero; i.e. when tRPAdminPSDefaultActionASPathPrependCount is zero and tRPAdminPSDefActASPPendCountSrc is set to actionValue(1)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 9 } tRPAdminPSDefActLocalPrefSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActLocalPrefSource specifies the source of the default action local preference. The value 'actionValue(1)' means the local preference value is the value of tRPAdminPSDefaultActionLocalPreference; the value of the object tRPAdminPSDefActLocalPrefParam is ignored. The value 'actionParam(2) means the local preference value is derived from the object tRPAdminPSDefActLocalPrefParam; the value of the object tRPAdminPSDefaultActionLocalPreference is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 10 } tRPAdminPSDefActLocalPrefParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActLocalPrefParam specifies the variable name that must be resolved to get the local preference for the route. The value of this object tRPAdminPSDefActLocalPrefParam is ignored when the object tRPAdminPSDefActLocalPrefSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 11 } tRPAdminPSDefActMetricParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActMetricParam specifies the variable name that must be resolved to get the metric value for the route. The value of this object tRPAdminPSDefActMetricParam is ignored when the object tRPAdminPSDefActionMetricSource has a value different from metricParam(3)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 12 } tRPAdminPSDefActNextHopSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActNextHopSource specifies the source of the default action next-hop. The value 'actionValue(1)' means the next-hop address is the value of tRPAdminPSDefActInetNextHop and the address type is defined by tRPAdminPSDefActInetNextHopType; the value of the object tRPAdminPSDefActNextHopParam is ignored. The value 'actionParam(2) means the next-hop value is derived from the object tRPAdminPSDefActNextHopParam; the value of the object tRPAdminPSDefActInetNextHop and tRPAdminPSDefActInetNextHopType are ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 13 } tRPAdminPSDefActNextHopParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActNextHopParam specifies the variable name that must be resolved to get the next-hop IP address in the route. The value of this object tRPAdminPSDefActNextHopParam is ignored when the object tRPAdminPSDefActNextHopSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 14 } tRPAdminPSDefActOriginSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActOriginSource specifies the source of the route origin default action. The value 'actionValue(1)' means the origin is the value of tRPAdminPSDefaultActionOrigin; the value of the object tRPAdminPSDefActOriginParam is ignored. The value 'actionParam(2) means the origin value is derived from the object tRPAdminPSDefActOriginParam; the value of the object tRPAdminPSDefaultActionOrigin is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 15 } tRPAdminPSDefActOriginParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActOriginParam specifies the variable name that must be resolved to get the origin of the route exported into BGP if it does not match an entry. The value of this object tRPAdminPSDefActOriginParam is ignored when the object tRPAdminPSDefActOriginSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 16 } tRPAdminPSDefActOrigValStateSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActOrigValStateSrc specifies the source of the default origin validation state. The value 'actionValue(1)' means the origin validation state is the value of tRPAdminPSDefActnOrigValidState; the value of the object tRPAdminPSDefActOrigValStatePar is ignored. The value 'actionParam(2) means the origin validation state value is derived from the object tRPAdminPSDefActOrigValStatePar; the value of the object tRPAdminPSDefActnOrigValidState is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 17 } tRPAdminPSDefActOrigValStatePar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActOrigValStatePar specifies the variable name that must be resolved to get the default origin validation state. The value of this object tRPAdminPSDefActOrigValStatePar can only be set when the object tRPAdminPSDefActOrigValStateSrc has the value actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 18 } tRPAdminPSDefActPreferenceSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActPreferenceSource specifies the source of the default action preference. The value 'actionValue(1)' means the preference is the value of tRPAdminPSDefaultActionPreference; the value of the object tRPAdminPSDefActPreferenceParam is ignored. The value 'actionParam(2) means the preference value is derived from the object tRPAdminPSDefActPreferenceParam; the value of the object tRPAdminPSDefaultActionPreference is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 19 } tRPAdminPSDefActPreferenceParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActPreferenceParam specifies the variable name that must be resolved to get the preference to apply to the route. The value of this object tRPAdminPSDefActPreferenceParam is ignored when the object tRPAdminPSDefActPreferenceSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 20 } tRPAdminPSDefActTagSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActTagSource specifies the source of the tag default action. The value 'actionValue(1)' means the tag is the value of tRPAdminPSDefaultActionTag; the value of the object tRPAdminPSDefActTagParam is ignored. The value 'actionParam(2) means the tag value is derived from the object tRPAdminPSDefActTagParam; the value of the object tRPAdminPSDefaultActionTag is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 21 } tRPAdminPSDefActTagParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActTagParam specifies the variable name that must be resolved to get the tag for the route. The value of this object tRPAdminPSDefActTagParam is ignored when the object tRPAdminPSDefActTagSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 22 } tRPAdminPSDefActOspfTypeSource OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActOspfTypeSource specifies the source of the OSPF route type. The value 'actionValue(1)' means the OSPF route type is the value of tRPAdminPSDefaultActionOspfType; the value of the object tRPAdminPSDefActOspfTypeParam is ignored. The value 'actionParam(2) means the OSPF route type value is derived from the object tRPAdminPSDefActOspfTypeParam; the value of the object tRPAdminPSDefaultActionOspfType is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 23 } tRPAdminPSDefActOspfTypeParam OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActOspfTypeParam specifies the variable name that must be resolved to get the OSPF route type for the route. The value of this object tRPAdminPSDefActOspfTypeParam is ignored when the object tRPAdminPSDefActOspfTypeSource has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 24 } tRPAdminPSDefActASPPendCountSrc OBJECT-TYPE SYNTAX TPolicyActionSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActASPPendCountSrc specifies the source of the default action AS Path prepend repeat count. The value 'actionValue(1)' means the AS Path prepend count is the value of tRPAdminPSDefaultActionASPathPrependCount; the value of the object tRPAdminPSDefActASPPendCountPar is ignored. The value 'actionParam(2) means the AS Path prepend count is derived from the object tRPAdminPSDefActASPPendCountPar; the value of the object tRPAdminPSDefaultActionASPathPrependCount is ignored." DEFVAL { actionValue } ::= { tRPAdminPSDefActParamsExtEntry 26 } tRPAdminPSDefActASPPendCountPar OBJECT-TYPE SYNTAX TPolicyVariableNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActASPPendCountPar specifies the variable name that must be resolved to get the number of times to prepend the AS number to the AS-Path attribute of the route. The value of this object is ignored when the object tRPAdminPSDefActASPPendCountSrc has a value different from actionParam(2)." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 27 } tRPAdminPSDefActASPPndMstRecent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActASPPndMstRecent specifies whether the most recent AS number must be prepended to the AS-Path attribute of the route. When the value of tRPAdminPSDefActASPPndMstRecent is true the last (most recent) ASN in the AS path is used to prepend to the AS-Path; tRPAdminPSDefaultActionASPathPnd and tRPAdminPSDefActASPathPendParam are ignored." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 28 } tRPAdminPSDefActCreateUdpTunnel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActCreateUdpTunnel specifies whether a UDP tunnel must be instantiated for the route matching this entry." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 29 } tRPAdminPSDefActResolveStatic OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActResolveStatic specifies whether the BGP next-hop for the route is the resolved next-hop of the static route. This object has only effect in BGP export policies and applies only to BGP routes created by exporting static routes with indirect next-hops. When the value of tRPAdminPSDefActResolveStatic is true, the BGP next-hop is the resolved next-hop of the static route. When the value is false, the BGP next-hop is copied from the indirect next-hop." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 30 } tRPAdminPSDefActAdminTagPolicy OBJECT-TYPE SYNTAX TPolicyAdminTagPolicyOrVarName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActAdminTagPolicy specifies the administrative tag policy for the route. The tRPAdminPSDefActAdminTagPolicy can be a string containing the administrative tag policy or a variable name that needs to be resolved to get the administrative tag policy. The internal colour value assigned to the tag is associated with the route. If one or more tags are specified in the policy in an include/exclude, then the internal colours associated with those tags are assigned to the include/exclude list. Set to empty string to disable." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 31 } tRPAdminPSDefActBgpMedSource OBJECT-TYPE SYNTAX TPolicyBgpMedSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpMedSource specifies the source to resolve to get the BGP MED value. When the value is 'igp', the BGP MED value is set to the IGP cost of the route or tunnel that resolves the BGP next-hop of the received BGP route. When the value is 'minIgp', the BGP MED value is set to the minimum IGP cost; i.e. if the cost of the resolving route or tunnel increases the advertised MED is not changed. When the value is 'medValue', the BGP MED value is set to the value of tRPAdminPSDefActBgpMedValue. When the value is 'expression', the BGP MED value is set based on a calculation of the provided expression in tRPAdminPSDefActBgpMedExpr." DEFVAL { none } ::= { tRPAdminPSDefActParamsExtEntry 32 } tRPAdminPSDefActBgpMedValue OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpMedValue specifies the the BGP MED value. The value of this object can be a string containing the BGP MED value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP MED value. The value of this object is ignored when the object tRPAdminPSDefActBgpMedSource has a value different from 'medValue'." DEFVAL { "" } ::= { tRPAdminPSDefActParamsExtEntry 33 } tRPAdminPSDefActBgpMedExpr OBJECT-TYPE SYNTAX TPolicyBgpMedExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpMedExpr specifies the expression that is used to calculate the BGP MED value. The value of this object is ignored when the object tRPAdminPSDefActBgpMedSource has a value different from 'expression'." DEFVAL { "" } ::= { tRPAdminPSDefActParamsExtEntry 34 } tRPAdminPSDefActDisableRtInstall OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActDisableRtInstall specifies whether to disable the installation of a BGP route in the Routing Table and the Forwarding Information Base (FIB)." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 35 } tRPAdminPSDefActSrLabelIndex OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActSrLabelIndex specifies the the Segment Routing (SR) Label Index value. The value of this object can be a string containing the SR label Index value in the range [1..524287] or a variable name that needs to be resolved to get the SR Label Index." DEFVAL { "" } ::= { tRPAdminPSDefActParamsExtEntry 36 } tRPAdminPSDefActSrLblIndPrefIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActSrLblIndPrefIgp specifies whether it is preferred to use the SR Label Index from the IGP route. When the value is 'true', BGP will use the SR Label Index form the IGP route when present else it will use the value from tRPAdminPSDefActSrLabelIndex. When the value is 'false', BGP will always use the tRPAdminPSDefActSrLabelIndex. The value of this object is ignored when the object tRPAdminPSDefActSrLabelIndex is empty." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 37 } tRPAdminPSDefActNextHopPeerAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActNextHopPeerAddr specifies whether the next-hop must be set to the peer address. This object cannot be set to 'true' at the same time as setting the other next-hop objects to a non-default value. When this object is set to 'true' then tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop, tRPAdminPSDefActNextHopSource and tRPAdminPSDefActNextHopParam objects are reset." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 38 } tRPAdminPSDefActBgpHighPriority OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpHighPriority specifies whether the corresponding prefix must be marked in BGP as needing high priority treatment." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 39 } tRPAdminPSDefActFlexAlgo OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActFlexAlgo specifies the identifier of the Flexible Algorithm. The value of this object can be a string containing the Flex Algo Id value in the range [128..255] or a variable name that needs to be resolved to get the Flex Algo Id." DEFVAL { "" } ::= { tRPAdminPSDefActParamsExtEntry 40 } tRPAdminPSDefActBgpTunnelMetric OBJECT-TYPE SYNTAX TPolicyValueOrVarNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpTunnelMetric specifies the the BGP Tunnel Metric value. The value of this object can be a string containing the BGP Tunnel Metric value in the range [0..4294967295] or a variable name that needs to be resolved to get the BGP Tunnel Metric." DEFVAL { "" } ::= { tRPAdminPSDefActParamsExtEntry 41 } tRPAdminPSDefActBgpTMetPrefAigp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActBgpTMetPrefAigp specifies whether it is preferred to use the value of the received AIGP attribute as BGP Tunnel Metric. If the value is 'true', the TTM metric is set to the value of the AIGP attribute if attached. If an AIGP metric is not attached or if the value is 'false', the tRPAdminPSDefActBgpTunnelMetric is set as TTM metric. The value of this object is ignored if the object tRPAdminPSDefActBgpTunnelMetric is empty." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 42 } tRPAdminPSDefActEgressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActEgressStats specifies whether to collect egress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 43 } tRPAdminPSDefActIngressStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActIngressStats specifies whether to collect ingress statistics for BGP Labeled Unicast routes. If the value is 'true', the system is instructed to allocate a statistical index." DEFVAL { false } ::= { tRPAdminPSDefActParamsExtEntry 44 } tRPAdminPSDefActSrMaintPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSDefActSrMaintPolicy specifies the named segment routing (SR) maintenance policy for SR policy routes. The maintenance policy must exist in TIMETRA-SR-POLICY-MIB::vRtrSrMainPlcyTable. The value of this object can be a string containing the maintenance policy or a variable name that needs to be resolved to get the maintenance policy. An empty string means that is disabled." DEFVAL { ''H } ::= { tRPAdminPSDefActParamsExtEntry 45 } tRPAdminPfxListNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPfxListNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of admin prefix list names." ::= { tRPAdminValueObjects 25 } tRPAdminPfxListNameEntry OBJECT-TYPE SYNTAX TRPAdminPfxListNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminPfxListNameEntry represents information about a particular prefix list name. Entries are created and deleted by the user. When a prefix list entry is created in tRPAdminPrefixListTable or tRPAdminInetPrefixListTable with a name that doesn't exist in the tRPAdminPfxListNameTable, a corresponding entry will be created automatically in tRPAdminPfxListNameTable. When a prefix list name is deleted from the tRPAdminPfxListNameTable, the corresponding entry will be deleted automatically in tRPAdminPrefixListTable and tRPAdminInetPrefixListTable." INDEX { tRPAdminPfxListName } ::= { tRPAdminPfxListNameTable 1 } TRPAdminPfxListNameEntry ::= SEQUENCE { tRPAdminPfxListName TPrefixListName, tRPAdminPfxListNameRowStatus RowStatus, tRPAdminPfxListNameCrOrigin TmnxCreateOrigin } tRPAdminPfxListName OBJECT-TYPE SYNTAX TPrefixListName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPfxListName indicates the name of the prefix list entry." ::= { tRPAdminPfxListNameEntry 1 } tRPAdminPfxListNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus for this row. To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPfxListNameTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPfxListNameTable." ::= { tRPAdminPfxListNameEntry 2 } tRPAdminPfxListNameCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPfxListNameCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminPfxListNameEntry 3 } tRPAdminPSCondExprTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSCondExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of conditional expressions for a policy statement." ::= { tRPAdminValueObjects 26 } tRPAdminPSCondExprEntry OBJECT-TYPE SYNTAX TRPAdminPSCondExprEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular conditional expression for a policy statement entry. The conditional expressions decides whether an entry should be evaluated. If the result of the conditional expression is 'TRUE' the entry is fully evaluated; if the result is 'FALSE' the entry is skipped and evaluations continues to the next entry or the default action is applied in case no next entry exists." INDEX { tRPAdminPolicyStatementName, tRPAdminPSNameEntryIndex } ::= { tRPAdminPSCondExprTable 1 } TRPAdminPSCondExprEntry ::= SEQUENCE { tRPAdminPSCondExprRowStatus RowStatus, tRPAdminPSCondExprRtExistString1 TPrefixListNameExpression } tRPAdminPSCondExprRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSCondExprRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)' or 'createAndWait(5)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperPSCondExprTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperPSCondExprTable." ::= { tRPAdminPSCondExprEntry 1 } tRPAdminPSCondExprRtExistString1 OBJECT-TYPE SYNTAX TPrefixListNameExpression MAX-ACCESS read-create STATUS current DESCRIPTION "The value of object tRPAdminPSCondExprRtExistString1 specifies an expression that contains a prefix list name and is used to test the route existence. The expression tests for the presence or absence of routes in the IP routing table that matches any of the entries in the prefix list. When tRPAdminPSCondExprRtExistString1 contains an empty string there is no route existence test and the expression is automatically considered 'TRUE'." DEFVAL { "" } ::= { tRPAdminPSCondExprEntry 2 } tRPAdminASPathGroupNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminASPathGroupNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of admin AS-Path Group names." ::= { tRPAdminValueObjects 27 } tRPAdminASPathGroupNameEntry OBJECT-TYPE SYNTAX TRPAdminASPathGroupNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminASPathGroupNameEntry represents information about a particular AS-Path Group name. Entries can be created and deleted by the user. When an AS-Path Group entry is created with a name that doesn't exist in the tRPAdminASPathGroupNameTable, a corresponding entry will be created automatically in tRPAdminASPathGroupNameTable. When an AS-Path Group name is deleted from the tRPAdminASPathGroupNameTable, the corresponding entry will be deleted automatically in tRPAdminASPathGroupTable." INDEX { tRPAdminASPGroupName } ::= { tRPAdminASPathGroupNameTable 1 } TRPAdminASPathGroupNameEntry ::= SEQUENCE { tRPAdminASPGroupName TASPathGroupName, tRPAdminASPGroupNameRowStatus RowStatus, tRPAdminASPGroupNameCrOrigin TmnxCreateOrigin } tRPAdminASPGroupName OBJECT-TYPE SYNTAX TASPathGroupName (SIZE (1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminASPGroupName indicates the name of the AS-Path Group." ::= { tRPAdminASPathGroupNameEntry 1 } tRPAdminASPGroupNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminASPGroupNameRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperASPathGroupNameTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperASPathGroupNameTable." ::= { tRPAdminASPathGroupNameEntry 2 } tRPAdminASPGroupNameCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminASPGroupNameCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminASPathGroupNameEntry 3 } tRPAdminCommunityNameTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminCommunityNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of admin community names." ::= { tRPAdminValueObjects 28 } tRPAdminCommunityNameEntry OBJECT-TYPE SYNTAX TRPAdminCommunityNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminCommunityNameEntry represents information about a particular community name. Entries can be created and deleted by the user. When a community entry is created in tRPAdminCommunityTable with a name that doesn't exist in the tRPAdminCommunityNameTable, a corresponding entry will be created automatically in tRPAdminCommunityNameTable. When a community name is deleted from the tRPAdminCommunityNameTable, the corresponding entry will be deleted automatically in tRPAdminCommunityTable." INDEX { tRPAdminCommName } ::= { tRPAdminCommunityNameTable 1 } TRPAdminCommunityNameEntry ::= SEQUENCE { tRPAdminCommName TLCommunityName, tRPAdminCommNameRowStatus RowStatus, tRPAdminCommNameCrOrigin TmnxCreateOrigin } tRPAdminCommName OBJECT-TYPE SYNTAX TLCommunityName (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminCommName indicates the name of the community." ::= { tRPAdminCommunityNameEntry 1 } tRPAdminCommNameRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminCommNameRowStatus specifies the RowStatus for this row. To create a row, set this object to 'createAndGo(4)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be created in the tRPOperCommunityNameTable. To destroy a row, set this object to 'destroy(6)'. When tRPAdminControlApply is set to 'commit(3)', the row will actually be removed from the tRPOperCommunityNameTable." ::= { tRPAdminCommunityNameEntry 2 } tRPAdminCommNameCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminCommNameCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminCommunityNameEntry 3 } tRPAdminGlobalVariableTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminGlobalVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information to resolve global variables used in policy." ::= { tRPAdminValueObjects 29 } tRPAdminGlobalVariableEntry OBJECT-TYPE SYNTAX TRPAdminGlobalVariableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry maps a global variable to a name which can be used in tRPAdminPSFromCriteriaTable, tRPAdminPSAcceptActionParamsTable, tRPAdminPSDefaultActionParamsTable, tRPAdminPSAcptActParamsExtTable or tRPAdminPSDefActParamsExtTable entries. If a local variable with the same name exists in tRPAdminPSPolicyVariableTable for the corresponding entry, the local variable is used to resolve the name." INDEX { tRPAdminGlobalVarName } ::= { tRPAdminGlobalVariableTable 1 } TRPAdminGlobalVariableEntry ::= SEQUENCE { tRPAdminGlobalVarName TPolicyVariableName, tRPAdminGlobalVarRowStatus RowStatus, tRPAdminGlobalVarType TPolicyVariableType, tRPAdminGlobalVarString TNamedItemOrEmpty, tRPAdminGlobalVarNumber Unsigned32, tRPAdminGlobalVarAddressType InetAddressType, tRPAdminGlobalVarAddress InetAddress, tRPAdminGlobalVarDecimal TPolicyDecimal } tRPAdminGlobalVarName OBJECT-TYPE SYNTAX TPolicyVariableName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminGlobalVarName specifies a variable name that can be used in the tRPAdminPSFromCriteriaTable, tRPAdminPSAcceptActionParamsTable, tRPAdminPSDefaultActionParamsTable, tRPAdminPSAcptActParamsExtTable or tRPAdminPSDefActParamsExtTable." ::= { tRPAdminGlobalVariableEntry 1 } tRPAdminGlobalVarRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarRowStatus specifies the RowStatus for this row." ::= { tRPAdminGlobalVariableEntry 2 } tRPAdminGlobalVarType OBJECT-TYPE SYNTAX TPolicyVariableType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarType specifies how to resolve the tRPAdminGlobalVarName. string(1) - indicates that tRPAdminGlobalVarString is to be used integer(2) - indicates that tRPAdminGlobalVarNumber is to be used address(3) - indicates that tRPAdminGlobalVarAddressType and tRPAdminGlobalVarAddress are to be used decimal(4) - indicates that tRPAdminGlobalVarDecimal is to be used" DEFVAL { string } ::= { tRPAdminGlobalVariableEntry 3 } tRPAdminGlobalVarString OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarString specifies e.g. the actual as-path name to which tRPAdminGlobalVarName is resolved. This object tRPAdminGlobalVarString is ignored when the object tRPAdminGlobalVarType has a value different then string(1)." DEFVAL { ''H } ::= { tRPAdminGlobalVariableEntry 4 } tRPAdminGlobalVarNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarNumber specifies e.g. the actual metric value to which tRPAdminGlobalVarName is resolved. This object tRPAdminGlobalVarNumber is ignored when the object tRPAdminGlobalVarType has a value different then integer(2)." DEFVAL { 0 } ::= { tRPAdminGlobalVariableEntry 5 } tRPAdminGlobalVarAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarAddressType specifies the actual IP address type of the tRPAdminGlobalVarAddress to which tRPAdminGlobalVarName is resolved. This object tRPAdminGlobalVarAddressType is ignored when the object tRPAdminGlobalVarType has a value different then address(3)." DEFVAL { unknown } ::= { tRPAdminGlobalVariableEntry 6 } tRPAdminGlobalVarAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarAddress specifies e.g. the actual next-hop address to which tRPAdminGlobalVarName is resolved. This object tRPAdminGlobalVarAddress is ignored when the object tRPAdminGlobalVarType has a value different from address(3)." DEFVAL { ''H } ::= { tRPAdminGlobalVariableEntry 7 } tRPAdminGlobalVarDecimal OBJECT-TYPE SYNTAX TPolicyDecimal MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminGlobalVarDecimal specifies the actual value in thousandths to which tRPAdminGlobalVarName is resolved. This object tRPAdminGlobalVarDecimal is ignored when the object tRPAdminGlobalVarType has a value different then decimal(4)." DEFVAL { "0" } ::= { tRPAdminGlobalVariableEntry 8 } tRPAdminPSToCritPfxListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSToCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix list names to match on as 'to' criteria for each policy statement entry." ::= { tRPAdminValueObjects 30 } tRPAdminPSToCritPfxListEntry OBJECT-TYPE SYNTAX TRPAdminPSToCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry to prefix list criteria.. Entries are created or deleted when an entry in tRPAdminPSToCriteriaTable is created or deleted." AUGMENTS { tRPAdminPSToCriteriaEntry } ::= { tRPAdminPSToCritPfxListTable 1 } TRPAdminPSToCritPfxListEntry ::= SEQUENCE { tRPAdminPSToCritPrefixList1 TPrefixListName, tRPAdminPSToCritPrefixList2 TPrefixListName, tRPAdminPSToCritPrefixList3 TPrefixListName, tRPAdminPSToCritPrefixList4 TPrefixListName, tRPAdminPSToCritPrefixList5 TPrefixListName, tRPAdminPSToCritPrefixList6 TPrefixListName, tRPAdminPSToCritPrefixList7 TPrefixListName, tRPAdminPSToCritPrefixList8 TPrefixListName, tRPAdminPSToCritPrefixList9 TPrefixListName, tRPAdminPSToCritPrefixList10 TPrefixListName, tRPAdminPSToCritPrefixList11 TPrefixListName, tRPAdminPSToCritPrefixList12 TPrefixListName, tRPAdminPSToCritPrefixList13 TPrefixListName, tRPAdminPSToCritPrefixList14 TPrefixListName, tRPAdminPSToCritPrefixList15 TPrefixListName, tRPAdminPSToCritPrefixList16 TPrefixListName, tRPAdminPSToCritPrefixList17 TPrefixListName, tRPAdminPSToCritPrefixList18 TPrefixListName, tRPAdminPSToCritPrefixList19 TPrefixListName, tRPAdminPSToCritPrefixList20 TPrefixListName, tRPAdminPSToCritPrefixList21 TPrefixListName, tRPAdminPSToCritPrefixList22 TPrefixListName, tRPAdminPSToCritPrefixList23 TPrefixListName, tRPAdminPSToCritPrefixList24 TPrefixListName, tRPAdminPSToCritPrefixList25 TPrefixListName, tRPAdminPSToCritPrefixList26 TPrefixListName, tRPAdminPSToCritPrefixList27 TPrefixListName, tRPAdminPSToCritPrefixList28 TPrefixListName } tRPAdminPSToCritPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList1 indicates the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 1 } tRPAdminPSToCritPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList2 indicates the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 2 } tRPAdminPSToCritPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList3 indicates the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 3 } tRPAdminPSToCritPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList4 indicates the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 4 } tRPAdminPSToCritPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList5 indicates the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 5 } tRPAdminPSToCritPrefixList6 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList6 indicates the name of the sixth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 6 } tRPAdminPSToCritPrefixList7 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList7 indicates the name of the seventh prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 7 } tRPAdminPSToCritPrefixList8 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList8 indicates the name of the eight prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 8 } tRPAdminPSToCritPrefixList9 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList9 indicates the name of the nineth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 9 } tRPAdminPSToCritPrefixList10 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList10 indicates the name of the 10th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 10 } tRPAdminPSToCritPrefixList11 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList11 indicates the name of the 11th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 11 } tRPAdminPSToCritPrefixList12 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList12 indicates the name of the 12th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 12 } tRPAdminPSToCritPrefixList13 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList13 indicates the name of the 13th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 13 } tRPAdminPSToCritPrefixList14 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList14 indicates the name of the 14th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 14 } tRPAdminPSToCritPrefixList15 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList15 indicates the name of the 15th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 15 } tRPAdminPSToCritPrefixList16 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList16 indicates the name of the 16th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 16 } tRPAdminPSToCritPrefixList17 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList17 indicates the name of the 17th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 17 } tRPAdminPSToCritPrefixList18 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList18 indicates the name of the 18th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 18 } tRPAdminPSToCritPrefixList19 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList19 indicates the name of the 19th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 19 } tRPAdminPSToCritPrefixList20 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList20 indicates the name of the 20th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 20 } tRPAdminPSToCritPrefixList21 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList21 indicates the name of the 21th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 21 } tRPAdminPSToCritPrefixList22 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList22 indicates the name of the 22th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 22 } tRPAdminPSToCritPrefixList23 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList23 indicates the name of the 23th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 23 } tRPAdminPSToCritPrefixList24 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList24 indicates the name of the 24th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 24 } tRPAdminPSToCritPrefixList25 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList25 indicates the name of the 25th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 25 } tRPAdminPSToCritPrefixList26 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList26 indicates the name of the 26th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 26 } tRPAdminPSToCritPrefixList27 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList27 indicates the name of the 27th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 27 } tRPAdminPSToCritPrefixList28 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSToCritPrefixList28 indicates the name of the 28th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSToCritPfxListEntry 28 } tRPAdminPSFromCritPfxListTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPSFromCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of prefix list names to match on as 'from' criteria for each policy statement entry" ::= { tRPAdminValueObjects 44 } tRPAdminPSFromCritPfxListEntry OBJECT-TYPE SYNTAX TRPAdminPSFromCritPfxListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about policy statement entry from prefix list criteria. Entries are created or deleted when an entry in tRPAdminPSFromCriteriaTable is created or deleted." AUGMENTS { tRPAdminPSFromCriteriaEntry } ::= { tRPAdminPSFromCritPfxListTable 1 } TRPAdminPSFromCritPfxListEntry ::= SEQUENCE { tRPAdminPSFromCritPrefixList1 TPrefixListName, tRPAdminPSFromCritPrefixList2 TPrefixListName, tRPAdminPSFromCritPrefixList3 TPrefixListName, tRPAdminPSFromCritPrefixList4 TPrefixListName, tRPAdminPSFromCritPrefixList5 TPrefixListName, tRPAdminPSFromCritPrefixList6 TPrefixListName, tRPAdminPSFromCritPrefixList7 TPrefixListName, tRPAdminPSFromCritPrefixList8 TPrefixListName, tRPAdminPSFromCritPrefixList9 TPrefixListName, tRPAdminPSFromCritPrefixList10 TPrefixListName, tRPAdminPSFromCritPrefixList11 TPrefixListName, tRPAdminPSFromCritPrefixList12 TPrefixListName, tRPAdminPSFromCritPrefixList13 TPrefixListName, tRPAdminPSFromCritPrefixList14 TPrefixListName, tRPAdminPSFromCritPrefixList15 TPrefixListName, tRPAdminPSFromCritPrefixList16 TPrefixListName, tRPAdminPSFromCritPrefixList17 TPrefixListName, tRPAdminPSFromCritPrefixList18 TPrefixListName, tRPAdminPSFromCritPrefixList19 TPrefixListName, tRPAdminPSFromCritPrefixList20 TPrefixListName, tRPAdminPSFromCritPrefixList21 TPrefixListName, tRPAdminPSFromCritPrefixList22 TPrefixListName, tRPAdminPSFromCritPrefixList23 TPrefixListName, tRPAdminPSFromCritPrefixList24 TPrefixListName, tRPAdminPSFromCritPrefixList25 TPrefixListName, tRPAdminPSFromCritPrefixList26 TPrefixListName, tRPAdminPSFromCritPrefixList27 TPrefixListName, tRPAdminPSFromCritPrefixList28 TPrefixListName } tRPAdminPSFromCritPrefixList1 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList1 indicates the name of the first prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 1 } tRPAdminPSFromCritPrefixList2 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList2 indicates the name of the second prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 2 } tRPAdminPSFromCritPrefixList3 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList3 indicates the name of the third prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 3 } tRPAdminPSFromCritPrefixList4 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList4 indicates the name of the fourth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 4 } tRPAdminPSFromCritPrefixList5 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList5 indicates the name of the fifth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 5 } tRPAdminPSFromCritPrefixList6 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList6 indicates the name of the sixth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 6 } tRPAdminPSFromCritPrefixList7 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList7 indicates the name of the seventh prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 7 } tRPAdminPSFromCritPrefixList8 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList8 indicates the name of the eight prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 8 } tRPAdminPSFromCritPrefixList9 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList9 indicates the name of the nineth prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 9 } tRPAdminPSFromCritPrefixList10 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList10 indicates the name of the 10th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 10 } tRPAdminPSFromCritPrefixList11 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList11 indicates the name of the 11th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 11 } tRPAdminPSFromCritPrefixList12 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList12 indicates the name of the 12th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 12 } tRPAdminPSFromCritPrefixList13 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList13 indicates the name of the 13th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 13 } tRPAdminPSFromCritPrefixList14 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList14 indicates the name of the 14th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 14 } tRPAdminPSFromCritPrefixList15 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList15 indicates the name of the 15th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 15 } tRPAdminPSFromCritPrefixList16 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList16 indicates the name of the 16th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 16 } tRPAdminPSFromCritPrefixList17 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList17 indicates the name of the 17th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 17 } tRPAdminPSFromCritPrefixList18 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList18 indicates the name of the 18th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 18 } tRPAdminPSFromCritPrefixList19 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList19 indicates the name of the 19th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 19 } tRPAdminPSFromCritPrefixList20 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList20 indicates the name of the 20th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 20 } tRPAdminPSFromCritPrefixList21 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList21 indicates the name of the 21th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 21 } tRPAdminPSFromCritPrefixList22 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList22 indicates the name of the 22th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 22 } tRPAdminPSFromCritPrefixList23 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList23 indicates the name of the 23th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 23 } tRPAdminPSFromCritPrefixList24 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList24 indicates the name of the 24th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 24 } tRPAdminPSFromCritPrefixList25 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList25 indicates the name of the 25th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 25 } tRPAdminPSFromCritPrefixList26 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList26 indicates the name of the 26th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 26 } tRPAdminPSFromCritPrefixList27 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList27 indicates the name of the 27th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 27 } tRPAdminPSFromCritPrefixList28 OBJECT-TYPE SYNTAX TPrefixListName MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPSFromCritPrefixList28 indicates the name of the 28th prefix list to match on. Setting this value to an empty string disables this prefix list as a match criteria." DEFVAL { "" } ::= { tRPAdminPSFromCritPfxListEntry 28 } tRPAdminPfxListToTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPfxListToEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IPv4 and IPv6 admin prefix lists specifying a match condition from a start prefix/length to an end prefix/length." ::= { tRPAdminValueObjects 45 } tRPAdminPfxListToEntry OBJECT-TYPE SYNTAX TRPAdminPfxListToEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminPfxListToEntry represents information about a particular prefix list to prefix. A route's prefix/length is considered a match if all of the following are true: - the begin prefix-length most-significant bits of the route matches the begin prefix - the end prefix-length most-significant bits of the route matches the end prefix - the prefix-length of the route is between begin prefix-length and end prefix-length (inclusive). Entries are created and deleted by the user." INDEX { tRPAdminPfxListName, tRPAdminInetPrefixListPrefixType, tRPAdminInetPrefixListPrefix, tRPAdminInetPrefixListPrefixLen, tRPAdminPfxListToEndPrefixType, tRPAdminPfxListToEndPrefix, tRPAdminPfxListToEndPrefixLen } ::= { tRPAdminPfxListToTable 1 } TRPAdminPfxListToEntry ::= SEQUENCE { tRPAdminPfxListToEndPrefixType TmnxAddressAndPrefixType, tRPAdminPfxListToEndPrefix TmnxAddressAndPrefixAddress, tRPAdminPfxListToEndPrefixLen TmnxAddressAndPrefixPrefix, tRPAdminPfxListToRowStatus RowStatus, tRPAdminPfxListToCrOrigin TmnxCreateOrigin } tRPAdminPfxListToEndPrefixType OBJECT-TYPE SYNTAX TmnxAddressAndPrefixType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPfxListToEndPrefixType indicates the address type of tRPAdminPfxListToEndPrefix." ::= { tRPAdminPfxListToEntry 1 } tRPAdminPfxListToEndPrefix OBJECT-TYPE SYNTAX TmnxAddressAndPrefixAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPfxListToEndPrefix indicates the end IP prefix of the prefix list entry." ::= { tRPAdminPfxListToEntry 2 } tRPAdminPfxListToEndPrefixLen OBJECT-TYPE SYNTAX TmnxAddressAndPrefixPrefix MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPfxListToEndPrefixLen indicates the end IP prefix length of the prefix list entry." ::= { tRPAdminPfxListToEntry 3 } tRPAdminPfxListToRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tRPAdminPfxListToRowStatus specifies the RowStatus for this row. To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPfxListToTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPfxListToTable." ::= { tRPAdminPfxListToEntry 4 } tRPAdminPfxListToCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPfxListToCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminPfxListToEntry 5 } tRPAdminPfxListAddressMaskTable OBJECT-TYPE SYNTAX SEQUENCE OF TRPAdminPfxListAddressMaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of admin prefix lists specifying a match condition that does not require contiguous network mask bits." ::= { tRPAdminValueObjects 46 } tRPAdminPfxListAddressMaskEntry OBJECT-TYPE SYNTAX TRPAdminPfxListAddressMaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the tRPAdminPfxListAddressMaskEntry represents information about a particular prefix list address mask. A route's prefix/length is considered a match if all of the following are true: - the bitwise logical AND of the prefix-list address and the mask equals the bitwise logical AND of the route address and the mask - the prefix length of the route matches the prefix length of the prefix-list entry Entries are created and deleted by the user." INDEX { tRPAdminPfxListName, tRPAdminInetPrefixListPrefixType, tRPAdminInetPrefixListPrefix, tRPAdminInetPrefixListPrefixLen, tRPAdminPfxListAddressMaskType, tRPAdminPfxListAddressMask } ::= { tRPAdminPfxListAddressMaskTable 1 } TRPAdminPfxListAddressMaskEntry ::= SEQUENCE { tRPAdminPfxListAddressMaskType InetAddressType, tRPAdminPfxListAddressMask InetAddress, tRPAdminPfxListAddrMaskRowStatus RowStatus, tRPAdminPfxListAddrMaskCrOrigin TmnxCreateOrigin } tRPAdminPfxListAddressMaskType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPfxListAddressMaskType specifies the address type of tRPAdminPfxListAddressMask." ::= { tRPAdminPfxListAddressMaskEntry 1 } tRPAdminPfxListAddressMask OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tRPAdminPfxListAddressMask specifies the address mask of the prefix list entry. The address type is specified by tRPAdminInetPrefixListPrefixType." ::= { tRPAdminPfxListAddressMaskEntry 2 } tRPAdminPfxListAddrMaskRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tRPAdminPfxListAddrMaskRowStatus specifies the RowStatus for this row. To create a row, set this object to createAndGo or createAndWait. When tRPAdminControlApply is set to commit(3), the row will actually be created in the tRPOperPfxListAddressMaskTable. To destroy a row, set this object to destroy(6). When tRPAdminControlApply is set to commit(3) the row will actually be removed from the tRPOperPfxListAddressMaskTable." ::= { tRPAdminPfxListAddressMaskEntry 3 } tRPAdminPfxListAddrMaskCrOrigin OBJECT-TYPE SYNTAX TmnxCreateOrigin MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tRPAdminPfxListAddrMaskCrOrigin indicates the mechanism used to create this entry." ::= { tRPAdminPfxListAddressMaskEntry 4 } tmnxRoutePolicyConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 17 } tmnxRoutePolicyCompliances OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 1 } tmnxRoutePolicy7450V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7450 ESS series systems 4.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObjectsV4v0Group, tmnxRPPolicyEntryObjectsV4v0Group } ::= { tmnxRoutePolicyCompliances 3 } tmnxRoutePolicy7750V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7750 SR series systems 4.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsGroup, tmnxRPCommunityObjectsGroup, tmnxRPDampingObjectsGroup, tmnxRPPrefixListObjectsGroup, tmnxRPPolicyObjectsV4v0Group, tmnxRPPolicyEntryObjectsV4v0Group, tmnxRPInetPrefixListObjectsGroup } ::= { tmnxRoutePolicyCompliances 4 } tmnxRoutePolicy7450V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7450 ESS series systems 5.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObjectsV5v0Group, tmnxRPPolicyEntryObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group } ::= { tmnxRoutePolicyCompliances 5 } tmnxRoutePolicy7750V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7750 SR series systems 5.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPPolicyObjectsV5v0Group, tmnxRPPolicyEntryObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group } ::= { tmnxRoutePolicyCompliances 6 } tmnxRoutePolicy7450V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7450 ESS series systems 5.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 7 } tmnxRoutePolicy7750V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7750 SR series systems 5.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 8 } tmnxRoutePolicy7450V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7450 ESS series systems 5.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 9 } tmnxRoutePolicy7750V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7750 SR series systems 5.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyEntryObjectsV7v0Group, tmnxRPPolicyObsoleteV7v0Group } ::= { tmnxRoutePolicyCompliances 10 } tmnxRoutePolicy7450V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7450 ESS series systems 9.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group } ::= { tmnxRoutePolicyCompliances 11 } tmnxRoutePolicy7750V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7750 SR series systems 9.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group } ::= { tmnxRoutePolicyCompliances 12 } tmnxRtPolicy7450V10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7450 ESS series systems 10.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group } ::= { tmnxRoutePolicyCompliances 13 } tmnxRtPolicy7750V10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia 7750 SR series systems 10.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV7v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyEntryObjectsV9v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group } ::= { tmnxRoutePolicyCompliances 14 } tmnxRtPolicyV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 11.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPAdminControlObjV11v0Group, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyObjectsV11v0Group, tmnxRPPolicyEntryObjsV11v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group, tmnxRPPolicyEntryObjV11v0Group } ::= { tmnxRoutePolicyCompliances 15 } tmnxRtPolicyV12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 12.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPAdminControlObjV11v0Group, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyObjectsV11v0Group, tmnxRPPolicyObjectsV12v0Group, tmnxRPPolicyVarObjectsGroup, tmnxRPPolicyEntryObjsV11v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group, tmnxRPPolicyEntryObjV11v0Group, tmnxRPOperPSAcceptActionFCGroup, tRPAdminPSAcceptOrigValidGroup, tmnxRPCreationOriginGroup, tmnxRPStickyEcmpGroup, tmnxRPBgpLeakingGroup } ::= { tmnxRoutePolicyCompliances 16 } tmnxRtPolicyV13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 13.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPAdminControlObjV11v0Group, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyObjectsV11v0Group, tmnxRPPolicyObjectsV12v0Group, tmnxRPPolicyVarObjectsGroup, tmnxRPPolicyEntryObjsV11v0Group, tmnxRPPolicyObsoleteV7v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV10v0Group, tmnxRPPolicyEntryObjV11v0Group, tmnxRPOperPSAcceptActionFCGroup, tRPAdminPSAcceptOrigValidGroup, tmnxRPCreationOriginGroup, tmnxRPStickyEcmpGroup, tmnxRPFlowSpecGroup, tmnxRPAddPathsGroup, tmnxRPBackupPathGroup, tmnxRPPrefixListV13v0Group, tmnxRPAdvertiseLabelGroup, tmnxRPBgpLeakingGroup, tmnxRPPolicyVarExtGroup, tmnxRPPSCondRouteGroup } ::= { tmnxRoutePolicyCompliances 17 } tmnxRtPolicyV14v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 14.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPAdminControlObjV11v0Group, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyObjectsV11v0Group, tmnxRPPolicyObjectsV12v0Group, tmnxRPPolicyVarObjectsGroup, tmnxRPPolicyObsoleteV7v0Group, tmnxRPPolicyObsoleteV14v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV14v0Group, tmnxRPPolicyEntryObjV11v0Group, tmnxRPOperPSAcceptActionFCGroup, tRPAdminPSAcceptOrigValidGroup, tmnxRPCreationOriginGroup, tmnxRPStickyEcmpGroup, tmnxRPFlowSpecGroup, tmnxRPAddPathsGroup, tmnxRPBackupPathGroup, tmnxRPPrefixListV13v0Group, tmnxRPAdvertiseLabelGroup, tmnxRPBgpLeakingGroup, tmnxRPPolicyVarExtGroup, tmnxRPPSCondRouteGroup, tmnxRPPSCriteriaObjsV14v0Group, tmnxRPCreationOriginV14v0Group } ::= { tmnxRoutePolicyCompliances 18 } tmnxRtPolicyV15v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 15.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPAdminControlObjV11v0Group, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyObjectsV11v0Group, tmnxRPPolicyObjectsV12v0Group, tmnxRPPolicyVarObjectsGroup, tmnxRPPolicyObsoleteV7v0Group, tmnxRPPolicyObsoleteV14v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV14v0Group, tmnxRPPolicyEntryObjV11v0Group, tmnxRPOperPSAcceptActionFCGroup, tRPAdminPSAcceptOrigValidGroup, tmnxRPCreationOriginGroup, tmnxRPStickyEcmpGroup, tmnxRPFlowSpecGroup, tmnxRPAddPathsGroup, tmnxRPBackupPathGroup, tmnxRPPrefixListV13v0Group, tmnxRPAdvertiseLabelGroup, tmnxRPBgpLeakingGroup, tmnxRPPolicyVarExtGroup, tmnxRPPSCondRouteGroup, tmnxRPPSCriteriaObjsV14v0Group, tmnxRPCreationOriginV14v0Group, tmnxRPPolicyExtV15v0Group } ::= { tmnxRoutePolicyCompliances 19 } tmnxRtPolicyV16v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 16.0 release." MODULE MANDATORY-GROUPS { tmnxRPAdminControlObjectsGroup, tmnxRPAdminControlObjV11v0Group, tmnxRPASPathObjectsV5v0Group, tmnxRPCommunityObjectsV5v0Group, tmnxRPDampingObjectsV5v0Group, tmnxRPPrefixListObjectsV5v0Group, tmnxRPInetPrefixListObjectsV5v0Group, tmnxRPPolicyObsoleteV5v0Group, tmnxRPPolicyObjectsV8v0Group, tmnxRPPolicyObjectsV9v0Group, tmnxRPPolicyObjectsV11v0Group, tmnxRPPolicyObjectsV12v0Group, tmnxRPPolicyVarObjectsGroup, tmnxRPPolicyObsoleteV7v0Group, tmnxRPPolicyObsoleteV14v0Group, tmnxRPQPPBV9v0R4Group, tmnxRPPolicyObjectsV10v0Group, tmnxRPASPathGroupV14v0Group, tmnxRPPolicyEntryObjV11v0Group, tmnxRPOperPSAcceptActionFCGroup, tRPAdminPSAcceptOrigValidGroup, tmnxRPCreationOriginGroup, tmnxRPStickyEcmpGroup, tmnxRPFlowSpecGroup, tmnxRPAddPathsGroup, tmnxRPBackupPathGroup, tmnxRPPrefixListV13v0Group, tmnxRPAdvertiseLabelGroup, tmnxRPBgpLeakingGroup, tmnxRPPolicyVarExtGroup, tmnxRPPSCondRouteGroup, tmnxRPPSCriteriaObjsV14v0Group, tmnxRPCreationOriginV14v0Group, tmnxRPPolicyExtV15v0Group, tmnxRPPolicyExtV16v0Group, tmnxRPPfxListExtV16v0Group } ::= { tmnxRoutePolicyCompliances 20 } tmnxRtPolicyV19v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 19.0 release." MODULE MANDATORY-GROUPS { tmnxRPPolicyExtV19v0Group } ::= { tmnxRoutePolicyCompliances 21 } tmnxRtPolicyV20v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement supporting management of Route Policies on Nokia SROS series systems 20.0 release." MODULE MANDATORY-GROUPS { tmnxRPPolicyV20v0Group } ::= { tmnxRoutePolicyCompliances 22 } tmnxRoutePolicyGroups OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 2 } tmnxRPAdminControlObjectsGroup OBJECT-GROUP OBJECTS { tRPAdminOwner, tRPAdminControlApply, tRPAdminLastSetTimer, tRPAdminLastSetTimeout } STATUS current DESCRIPTION "The group of objects supporting management of transactions applying changed Administrative values to the Operational Route Policy database on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 1 } tmnxRPASPathObjectsGroup OBJECT-GROUP OBJECTS { tRPOperASPathTableLastChanged, tRPOperASPathRowStatus, tRPOperASPathRegEx, tRPOperASPathEntryLastChanged, tRPAdminASPathRowStatus, tRPAdminASPathRegEx } STATUS obsolete DESCRIPTION "The group of objects supporting management of AS Paths on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 2 } tmnxRPCommunityObjectsGroup OBJECT-GROUP OBJECTS { tRPOperCommunityTableLastChanged, tRPOperCommunityRowStatus, tRPOperCommunityEntryLastChanged, tRPAdminCommunityRowStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy communities on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 3 } tmnxRPDampingObjectsGroup OBJECT-GROUP OBJECTS { tRPOperDampingTableLastChanged, tRPOperDampingRowStatus, tRPOperDampingHalfLife, tRPOperDampingMaxSuppress, tRPOperDampingReuse, tRPOperDampingSuppress, tRPOperDampingEntryLastChanged, tRPAdminDampingRowStatus, tRPAdminDampingHalfLife, tRPAdminDampingMaxSuppress, tRPAdminDampingReuse, tRPAdminDampingSuppress } STATUS obsolete DESCRIPTION "The group of objects supporting management route policy damping on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 4 } tmnxRPPrefixListObjectsGroup OBJECT-GROUP OBJECTS { tRPOperPrefixListTableLastChanged, tRPOperPrefixListRowStatus, tRPOperPrefixListThroughLength, tRPOperPrefixListEntryLastChanged, tRPOperPrefixListBeginLength, tRPAdminPrefixListRowStatus, tRPAdminPrefixListThroughLength, tRPAdminPrefixListBeginLength } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy prefix lists on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 5 } tmnxRPPolicyObjectsV4v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementTableLastChanged, tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPolicyStatementEntryLastChanged, tRPOperPSDefaultActionParamsTableLastChanged, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependAS, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefaultActionParamsEntryLastChanged, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependAS, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop } STATUS obsolete DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 9 } tmnxRPPolicyEntryObjectsV4v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsTableLastChanged, tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSParamsEntryLastChanged, tRPOperPSAcceptActionParamsTableLastChanged, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependAS, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcceptActionParamsEntryLastChanged, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaTableLastChanged, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaEntryLastChanged, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSFromCriteriaTableLastChanged, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaEntryLastChanged, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependAS, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Nokia SROS series systems 4.0 release." ::= { tmnxRoutePolicyGroups 10 } tmnxRPInetPrefixListObjectsGroup OBJECT-GROUP OBJECTS { tRPOperInetPrefixListTblLastChg, tRPOperInetPrefixListRowStatus, tRPOperInetPrefixListThroughLen, tRPOperInetPrefixListLastChg, tRPOperInetPrefixListBeginLen, tRPAdminInetPrefixListRowStatus, tRPAdminInetPrefixListThroughLen, tRPAdminInetPrefixListBeginLen } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy prefix lists on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 11 } tmnxRPPolicyEntryObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependAS, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependAS, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Nokia SROS SR series systems 5.0 release." ::= { tmnxRoutePolicyGroups 12 } tmnxRPPolicyObsoleteV5v0Group OBJECT-GROUP OBJECTS { tRPOperASPathTableLastChanged, tRPOperASPathEntryLastChanged, tRPOperCommunityTableLastChanged, tRPOperCommunityEntryLastChanged, tRPOperDampingTableLastChanged, tRPOperDampingEntryLastChanged, tRPOperPrefixListTableLastChanged, tRPOperPrefixListEntryLastChanged, tRPOperPolicyStatementTableLastChanged, tRPOperPolicyStatementEntryLastChanged, tRPOperPSDefaultActionParamsTableLastChanged, tRPOperPSDefaultActionParamsEntryLastChanged, tRPOperPSParamsTableLastChanged, tRPOperPSParamsEntryLastChanged, tRPOperPSAcceptActionParamsTableLastChanged, tRPOperPSAcceptActionParamsEntryLastChanged, tRPOperPSToCriteriaTableLastChanged, tRPOperPSToCriteriaEntryLastChanged, tRPOperPSFromCriteriaTableLastChanged, tRPOperPSFromCriteriaEntryLastChanged, tRPOperInetPrefixListTblLastChg, tRPOperInetPrefixListLastChg } STATUS current DESCRIPTION "The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted." ::= { tmnxRoutePolicyGroups 13 } tmnxRPASPathObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperASPathRowStatus, tRPOperASPathRegEx, tRPAdminASPathRowStatus, tRPAdminASPathRegEx } STATUS current DESCRIPTION "The group of objects supporting management of AS Paths on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 14 } tmnxRPCommunityObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperCommunityRowStatus, tRPAdminCommunityRowStatus } STATUS current DESCRIPTION "The group of objects supporting management of route policy communities on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 15 } tmnxRPDampingObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperDampingRowStatus, tRPOperDampingHalfLife, tRPOperDampingMaxSuppress, tRPOperDampingReuse, tRPOperDampingSuppress, tRPAdminDampingRowStatus, tRPAdminDampingHalfLife, tRPAdminDampingMaxSuppress, tRPAdminDampingReuse, tRPAdminDampingSuppress } STATUS current DESCRIPTION "The group of objects supporting management route policy damping on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 16 } tmnxRPPrefixListObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperPrefixListRowStatus, tRPOperPrefixListThroughLength, tRPOperPrefixListBeginLength, tRPAdminPrefixListRowStatus, tRPAdminPrefixListThroughLength, tRPAdminPrefixListBeginLength } STATUS current DESCRIPTION "The group of objects supporting management of route policy prefix lists on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 17 } tmnxRPPolicyObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependAS, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependAS, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop } STATUS obsolete DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 18 } tmnxRPInetPrefixListObjectsV5v0Group OBJECT-GROUP OBJECTS { tRPOperInetPrefixListRowStatus, tRPOperInetPrefixListThroughLen, tRPOperInetPrefixListBeginLen, tRPAdminInetPrefixListRowStatus, tRPAdminInetPrefixListThroughLen, tRPAdminInetPrefixListBeginLen } STATUS current DESCRIPTION "The group of objects supporting management of route policy prefix lists on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 19 } tmnxRPPolicyObjectsV7v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop, tRPAdminPSDefaultActionASPathPnd, tRPOperPSDefaultActionASPathPend } STATUS obsolete DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 20 } tmnxRPPolicyEntryObjectsV7v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId, tRPAdminPSAcceptActionASPathPend, tRPOperPSAcceptActionASPathPend, tRPOperPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaMatchTag } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Nokia SROS series systems 7.0 release." ::= { tmnxRoutePolicyGroups 21 } tmnxRPPolicyObsoleteV7v0Group OBJECT-GROUP OBJECTS { tRPAdminPSDefaultActionASPathPrependAS, tRPAdminPSAcceptActionASPathPrependAS, tRPOperPSDefaultActionASPathPrependAS, tRPOperPSAcceptActionASPathPrependAS } STATUS current DESCRIPTION "The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted in Nokia SROS series systems 7.0 release." ::= { tmnxRoutePolicyGroups 22 } tmnxRPPolicyObjectsV8v0Group OBJECT-GROUP OBJECTS { tRPAdminPSDefActMcRedirSvcId, tRPAdminPSDefActMcRedirIfIndex, tRPOperPSDefActMcRedirSvcId, tRPOperPSDefActMcRedirIfIndex } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Nokia SROS series systems that were added in release 8.0." ::= { tmnxRoutePolicyGroups 25 } tmnxRPQPPBV9v0R4Group OBJECT-GROUP OBJECTS { tRPAdminPSAcceptActionFC, tRPAdminPSAcceptActionFCPriority } STATUS current DESCRIPTION "The group of objects supporting QoS policy propagation using BGP in release 9.0R4 Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 26 } tmnxRPPolicyEntryObjectsV9v0Group OBJECT-GROUP OBJECTS { tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId, tRPAdminPSAcceptActionASPathPend, tRPOperPSAcceptActionASPathPend, tRPOperPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaState, tRPOperPSFromCriteriaState } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Nokia SROS SR series systems 9.0 release." ::= { tmnxRoutePolicyGroups 27 } tmnxRPPolicyObjectsV9v0Group OBJECT-GROUP OBJECTS { tRPAdminPSAcptActMcRedirSvcId, tRPAdminPSAcptActMcRedirIfIndex, tRPOperPSAcptActMcRedirSvcId, tRPOperPSAcptActMcRedirIfIndex } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Nokia SROS series systems that were added in release 9.0." ::= { tmnxRoutePolicyGroups 30 } tmnxRPPolicyObjectsV10v0Group OBJECT-GROUP OBJECTS { tRPAdminPSAcptActnMetricSource, tRPAdminPSDefActionMetricSource, tRPOperPSAcptActnMetricSource, tRPOperPSDefActionMetricSource, tRPAdminPSAcptActionAigpMetric, tRPAdminPSAcptActnAigpMetricVal, tRPOperPSAcptActionAigpMetric, tRPOperPSAcptActnAigpMetricVal, tRPOperCommunityExprString1, tRPOperCommunityExprString2, tRPOperCommunityExprString3, tRPOperCommunityExprString4, tRPOperCommunityExprRowStatus, tRPAdminCommunityExprString1, tRPAdminCommunityExprString2, tRPAdminCommunityExprString3, tRPAdminCommunityExprString4, tRPAdminCommunityExprRowStatus, tRPAdminPSDefActionAigpMetric, tRPAdminPSDefActnAigpMetricVal, tRPOperPSDefActionAigpMetric, tRPOperPSDefActnAigpMetricVal } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and default action parameters on Nokia SROS series systems that were added in release 10.0." ::= { tmnxRoutePolicyGroups 31 } tmnxRPASPathGroupV10v0Group OBJECT-GROUP OBJECTS { tRPOperASPathGroupRowStatus, tRPOperASPathGroupASPathName, tRPOperASPathGroupASPathRegEx, tRPAdminASPathGroupRowStatus, tRPAdminASPathGroupASPathName, tRPAdminASPathGroupASPathRegEx, tRPOperPSFromCritASPathGroup, tRPAdminPSFromCritASPathGroup } STATUS obsolete DESCRIPTION "The group of objects supporting management of AS-Path Groups on Nokia SROS series systems since release 10.0." ::= { tmnxRoutePolicyGroups 32 } tmnxRPPolicyEntryObjV11v0Group OBJECT-GROUP OBJECTS { tRPOperPSFromCriteriaPolicy, tRPAdminPSFromCriteriaPolicy, tRPOperPSFromCommExprRowStatus, tRPOperPSFromCommExprString1, tRPOperPSFromCommExprString2, tRPOperPSFromCommExprString3, tRPOperPSFromCommExprString4, tRPAdminPSFromCommExprRowStatus, tRPAdminPSFromCommExprString1, tRPAdminPSFromCommExprString2, tRPAdminPSFromCommExprString3, tRPAdminPSFromCommExprString4 } STATUS current DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters, 'from' filter parameters, and accept action parameters on Nokia SROS SR series systems 11.0 release." ::= { tmnxRoutePolicyGroups 33 } tmnxRPAdminControlObjV11v0Group OBJECT-GROUP OBJECTS { tRPAdminControlResetExclusive } STATUS current DESCRIPTION "The group of objects supporting management of transactions applying changed Administrative values to the Operational Route Policy database on Nokia SROS series systems since 11.0 release." ::= { tmnxRoutePolicyGroups 34 } tmnxRPPolicyObjectsV11v0Group OBJECT-GROUP OBJECTS { tRPOperPolicyStatementRowStatus, tRPOperPolicyStatementDescription, tRPOperPolicyStatementDefaultAction, tRPOperPSDefaultActionASPath, tRPOperPSDefaultActionASPathName, tRPOperPSDefaultActionASPathPrependCount, tRPOperPSDefaultActionOrigin, tRPOperPSDefaultActionLocalPreferenceSet, tRPOperPSDefaultActionLocalPreference, tRPOperPSDefaultActionMetric, tRPOperPSDefaultActionMetricValue, tRPOperPSDefaultActionPreference, tRPOperPSDefaultActionDamping, tRPOperPSDefaultActionNextHopSelf, tRPOperPSDefaultActionNextHop, tRPOperPSDefaultActionTag, tRPOperPSDefaultActionOspfType, tRPOperPSDefActInetNextHopType, tRPOperPSDefActInetNextHop, tRPAdminPolicyStatementRowStatus, tRPAdminPolicyStatementDescription, tRPAdminPolicyStatementDefaultAction, tRPAdminPSDefaultActionASPath, tRPAdminPSDefaultActionASPathName, tRPAdminPSDefaultActionASPathPrependCount, tRPAdminPSDefaultActionOrigin, tRPAdminPSDefaultActionLocalPreferenceSet, tRPAdminPSDefaultActionLocalPreference, tRPAdminPSDefaultActionMetric, tRPAdminPSDefaultActionMetricValue, tRPAdminPSDefaultActionPreference, tRPAdminPSDefaultActionDamping, tRPAdminPSDefaultActionNextHopSelf, tRPAdminPSDefaultActionNextHop, tRPAdminPSDefaultActionTag, tRPAdminPSDefaultActionOspfType, tRPAdminPSDefActInetNextHopType, tRPAdminPSDefActInetNextHop, tRPAdminPSDefaultActionASPathPnd, tRPOperPSDefaultActionASPathPend, tRPOperPSParamsRowStatus, tRPOperPSParamsDescription, tRPOperPSParamsAction, tRPAdminPSParamsRowStatus, tRPAdminPSParamsDescription, tRPAdminPSParamsAction, tRPOperPSAcceptActionASPath, tRPOperPSAcceptActionASPathName, tRPOperPSAcceptActionASPathPrependCount, tRPOperPSAcceptActionOrigin, tRPOperPSAcceptActionLocalPreferenceSet, tRPOperPSAcceptActionLocalPreference, tRPOperPSAcceptActionMetric, tRPOperPSAcceptActionMetricValue, tRPOperPSAcceptActionPreference, tRPOperPSAcceptActionDamping, tRPOperPSAcceptActionNextHopSelf, tRPOperPSAcceptActionNextHop, tRPOperPSAcceptActionTag, tRPOperPSAcceptActionOspfType, tRPOperPSAcptActInetNextHopType, tRPOperPSAcptActInetNextHop, tRPOperPSAcceptActionASPathPend, tRPAdminPSAcceptActionASPath, tRPAdminPSAcceptActionASPathName, tRPAdminPSAcceptActionASPathPrependCount, tRPAdminPSAcceptActionOrigin, tRPAdminPSAcceptActionLocalPreferenceSet, tRPAdminPSAcceptActionLocalPreference, tRPAdminPSAcceptActionMetric, tRPAdminPSAcceptActionMetricValue, tRPAdminPSAcceptActionPreference, tRPAdminPSAcceptActionDamping, tRPAdminPSAcceptActionNextHopSelf, tRPAdminPSAcceptActionNextHop, tRPAdminPSAcceptActionTag, tRPAdminPSAcceptActionOspfType, tRPAdminPSAcptActInetNextHopType, tRPAdminPSAcptActInetNextHop, tRPAdminPSAcceptActionASPathPend, tRPOperPSDefActionAddComm1, tRPOperPSDefActionAddComm2, tRPOperPSDefActionAddComm3, tRPOperPSDefActionAddComm4, tRPOperPSDefActionAddComm5, tRPOperPSDefActionAddComm6, tRPOperPSDefActionAddComm7, tRPOperPSDefActionAddComm8, tRPOperPSDefActionAddComm9, tRPOperPSDefActionAddComm10, tRPOperPSDefActionAddComm11, tRPOperPSDefActionAddComm12, tRPOperPSDefActionAddComm13, tRPOperPSDefActionAddComm14, tRPOperPSDefActionAddComm15, tRPOperPSDefActionAddComm16, tRPOperPSDefActionAddComm17, tRPOperPSDefActionAddComm18, tRPOperPSDefActionAddComm19, tRPOperPSDefActionAddComm20, tRPOperPSDefActionAddComm21, tRPOperPSDefActionAddComm22, tRPOperPSDefActionAddComm23, tRPOperPSDefActionAddComm24, tRPOperPSDefActionAddComm25, tRPOperPSDefActionAddComm26, tRPOperPSDefActionAddComm27, tRPOperPSDefActionAddComm28, tRPOperPSDefActionRemoveComm1, tRPOperPSDefActionRemoveComm2, tRPOperPSDefActionRemoveComm3, tRPOperPSDefActionRemoveComm4, tRPOperPSDefActionRemoveComm5, tRPOperPSDefActionRemoveComm6, tRPOperPSDefActionRemoveComm7, tRPOperPSDefActionRemoveComm8, tRPOperPSDefActionRemoveComm9, tRPOperPSDefActionRemoveComm10, tRPOperPSDefActionRemoveComm11, tRPOperPSDefActionRemoveComm12, tRPOperPSDefActionRemoveComm13, tRPOperPSDefActionRemoveComm14, tRPOperPSDefActionRemoveComm15, tRPOperPSDefActionRemoveComm16, tRPOperPSDefActionRemoveComm17, tRPOperPSDefActionRemoveComm18, tRPOperPSDefActionRemoveComm19, tRPOperPSDefActionRemoveComm20, tRPOperPSDefActionRemoveComm21, tRPOperPSDefActionRemoveComm22, tRPOperPSDefActionRemoveComm23, tRPOperPSDefActionRemoveComm24, tRPOperPSDefActionRemoveComm25, tRPOperPSDefActionRemoveComm26, tRPOperPSDefActionRemoveComm27, tRPOperPSDefActionRemoveComm28, tRPOperPSDefActionReplaceComm1, tRPOperPSDefActionReplaceComm2, tRPOperPSDefActionReplaceComm3, tRPOperPSDefActionReplaceComm4, tRPOperPSDefActionReplaceComm5, tRPOperPSDefActionReplaceComm6, tRPOperPSDefActionReplaceComm7, tRPOperPSDefActionReplaceComm8, tRPOperPSDefActionReplaceComm9, tRPOperPSDefActionReplaceComm10, tRPOperPSDefActionReplaceComm11, tRPOperPSDefActionReplaceComm12, tRPOperPSDefActionReplaceComm13, tRPOperPSDefActionReplaceComm14, tRPOperPSDefActionReplaceComm15, tRPOperPSDefActionReplaceComm16, tRPOperPSDefActionReplaceComm17, tRPOperPSDefActionReplaceComm18, tRPOperPSDefActionReplaceComm19, tRPOperPSDefActionReplaceComm20, tRPOperPSDefActionReplaceComm21, tRPOperPSDefActionReplaceComm22, tRPOperPSDefActionReplaceComm23, tRPOperPSDefActionReplaceComm24, tRPOperPSDefActionReplaceComm25, tRPOperPSDefActionReplaceComm26, tRPOperPSDefActionReplaceComm27, tRPOperPSDefActionReplaceComm28, tRPAdminPSDefActionAddComm1, tRPAdminPSDefActionAddComm2, tRPAdminPSDefActionAddComm3, tRPAdminPSDefActionAddComm4, tRPAdminPSDefActionAddComm5, tRPAdminPSDefActionAddComm6, tRPAdminPSDefActionAddComm7, tRPAdminPSDefActionAddComm8, tRPAdminPSDefActionAddComm9, tRPAdminPSDefActionAddComm10, tRPAdminPSDefActionAddComm11, tRPAdminPSDefActionAddComm12, tRPAdminPSDefActionAddComm13, tRPAdminPSDefActionAddComm14, tRPAdminPSDefActionAddComm15, tRPAdminPSDefActionAddComm16, tRPAdminPSDefActionAddComm17, tRPAdminPSDefActionAddComm18, tRPAdminPSDefActionAddComm19, tRPAdminPSDefActionAddComm20, tRPAdminPSDefActionAddComm21, tRPAdminPSDefActionAddComm22, tRPAdminPSDefActionAddComm23, tRPAdminPSDefActionAddComm24, tRPAdminPSDefActionAddComm25, tRPAdminPSDefActionAddComm26, tRPAdminPSDefActionAddComm27, tRPAdminPSDefActionAddComm28, tRPAdminPSDefActionRemoveComm1, tRPAdminPSDefActionRemoveComm2, tRPAdminPSDefActionRemoveComm3, tRPAdminPSDefActionRemoveComm4, tRPAdminPSDefActionRemoveComm5, tRPAdminPSDefActionRemoveComm6, tRPAdminPSDefActionRemoveComm7, tRPAdminPSDefActionRemoveComm8, tRPAdminPSDefActionRemoveComm9, tRPAdminPSDefActionRemoveComm10, tRPAdminPSDefActionRemoveComm11, tRPAdminPSDefActionRemoveComm12, tRPAdminPSDefActionRemoveComm13, tRPAdminPSDefActionRemoveComm14, tRPAdminPSDefActionRemoveComm15, tRPAdminPSDefActionRemoveComm16, tRPAdminPSDefActionRemoveComm17, tRPAdminPSDefActionRemoveComm18, tRPAdminPSDefActionRemoveComm19, tRPAdminPSDefActionRemoveComm20, tRPAdminPSDefActionRemoveComm21, tRPAdminPSDefActionRemoveComm22, tRPAdminPSDefActionRemoveComm23, tRPAdminPSDefActionRemoveComm24, tRPAdminPSDefActionRemoveComm25, tRPAdminPSDefActionRemoveComm26, tRPAdminPSDefActionRemoveComm27, tRPAdminPSDefActionRemoveComm28, tRPAdminPSDefActionReplaceComm1, tRPAdminPSDefActionReplaceComm2, tRPAdminPSDefActionReplaceComm3, tRPAdminPSDefActionReplaceComm4, tRPAdminPSDefActionReplaceComm5, tRPAdminPSDefActionReplaceComm6, tRPAdminPSDefActionReplaceComm7, tRPAdminPSDefActionReplaceComm8, tRPAdminPSDefActionReplaceComm9, tRPAdminPSDefActionReplaceComm10, tRPAdminPSDefActionReplaceComm11, tRPAdminPSDefActionReplaceComm12, tRPAdminPSDefActionReplaceComm13, tRPAdminPSDefActionReplaceComm14, tRPAdminPSDefActionReplaceComm15, tRPAdminPSDefActionReplaceComm16, tRPAdminPSDefActionReplaceComm17, tRPAdminPSDefActionReplaceComm18, tRPAdminPSDefActionReplaceComm19, tRPAdminPSDefActionReplaceComm20, tRPAdminPSDefActionReplaceComm21, tRPAdminPSDefActionReplaceComm22, tRPAdminPSDefActionReplaceComm23, tRPAdminPSDefActionReplaceComm24, tRPAdminPSDefActionReplaceComm25, tRPAdminPSDefActionReplaceComm26, tRPAdminPSDefActionReplaceComm27, tRPAdminPSDefActionReplaceComm28, tRPOperPSAccActionAddComm1, tRPOperPSAccActionAddComm2, tRPOperPSAccActionAddComm3, tRPOperPSAccActionAddComm4, tRPOperPSAccActionAddComm5, tRPOperPSAccActionAddComm6, tRPOperPSAccActionAddComm7, tRPOperPSAccActionAddComm8, tRPOperPSAccActionAddComm9, tRPOperPSAccActionAddComm10, tRPOperPSAccActionAddComm11, tRPOperPSAccActionAddComm12, tRPOperPSAccActionAddComm13, tRPOperPSAccActionAddComm14, tRPOperPSAccActionAddComm15, tRPOperPSAccActionAddComm16, tRPOperPSAccActionAddComm17, tRPOperPSAccActionAddComm18, tRPOperPSAccActionAddComm19, tRPOperPSAccActionAddComm20, tRPOperPSAccActionAddComm21, tRPOperPSAccActionAddComm22, tRPOperPSAccActionAddComm23, tRPOperPSAccActionAddComm24, tRPOperPSAccActionAddComm25, tRPOperPSAccActionAddComm26, tRPOperPSAccActionAddComm27, tRPOperPSAccActionAddComm28, tRPOperPSAccActionRemoveComm1, tRPOperPSAccActionRemoveComm2, tRPOperPSAccActionRemoveComm3, tRPOperPSAccActionRemoveComm4, tRPOperPSAccActionRemoveComm5, tRPOperPSAccActionRemoveComm6, tRPOperPSAccActionRemoveComm7, tRPOperPSAccActionRemoveComm8, tRPOperPSAccActionRemoveComm9, tRPOperPSAccActionRemoveComm10, tRPOperPSAccActionRemoveComm11, tRPOperPSAccActionRemoveComm12, tRPOperPSAccActionRemoveComm13, tRPOperPSAccActionRemoveComm14, tRPOperPSAccActionRemoveComm15, tRPOperPSAccActionRemoveComm16, tRPOperPSAccActionRemoveComm17, tRPOperPSAccActionRemoveComm18, tRPOperPSAccActionRemoveComm19, tRPOperPSAccActionRemoveComm20, tRPOperPSAccActionRemoveComm21, tRPOperPSAccActionRemoveComm22, tRPOperPSAccActionRemoveComm23, tRPOperPSAccActionRemoveComm24, tRPOperPSAccActionRemoveComm25, tRPOperPSAccActionRemoveComm26, tRPOperPSAccActionRemoveComm27, tRPOperPSAccActionRemoveComm28, tRPOperPSAccActionReplaceComm1, tRPOperPSAccActionReplaceComm2, tRPOperPSAccActionReplaceComm3, tRPOperPSAccActionReplaceComm4, tRPOperPSAccActionReplaceComm5, tRPOperPSAccActionReplaceComm6, tRPOperPSAccActionReplaceComm7, tRPOperPSAccActionReplaceComm8, tRPOperPSAccActionReplaceComm9, tRPOperPSAccActionReplaceComm10, tRPOperPSAccActionReplaceComm11, tRPOperPSAccActionReplaceComm12, tRPOperPSAccActionReplaceComm13, tRPOperPSAccActionReplaceComm14, tRPOperPSAccActionReplaceComm15, tRPOperPSAccActionReplaceComm16, tRPOperPSAccActionReplaceComm17, tRPOperPSAccActionReplaceComm18, tRPOperPSAccActionReplaceComm19, tRPOperPSAccActionReplaceComm20, tRPOperPSAccActionReplaceComm21, tRPOperPSAccActionReplaceComm22, tRPOperPSAccActionReplaceComm23, tRPOperPSAccActionReplaceComm24, tRPOperPSAccActionReplaceComm25, tRPOperPSAccActionReplaceComm26, tRPOperPSAccActionReplaceComm27, tRPOperPSAccActionReplaceComm28, tRPAdminPSAccActionAddComm1, tRPAdminPSAccActionAddComm2, tRPAdminPSAccActionAddComm3, tRPAdminPSAccActionAddComm4, tRPAdminPSAccActionAddComm5, tRPAdminPSAccActionAddComm6, tRPAdminPSAccActionAddComm7, tRPAdminPSAccActionAddComm8, tRPAdminPSAccActionAddComm9, tRPAdminPSAccActionAddComm10, tRPAdminPSAccActionAddComm11, tRPAdminPSAccActionAddComm12, tRPAdminPSAccActionAddComm13, tRPAdminPSAccActionAddComm14, tRPAdminPSAccActionAddComm15, tRPAdminPSAccActionAddComm16, tRPAdminPSAccActionAddComm17, tRPAdminPSAccActionAddComm18, tRPAdminPSAccActionAddComm19, tRPAdminPSAccActionAddComm20, tRPAdminPSAccActionAddComm21, tRPAdminPSAccActionAddComm22, tRPAdminPSAccActionAddComm23, tRPAdminPSAccActionAddComm24, tRPAdminPSAccActionAddComm25, tRPAdminPSAccActionAddComm26, tRPAdminPSAccActionAddComm27, tRPAdminPSAccActionAddComm28, tRPAdminPSAccActionRemoveComm1, tRPAdminPSAccActionRemoveComm2, tRPAdminPSAccActionRemoveComm3, tRPAdminPSAccActionRemoveComm4, tRPAdminPSAccActionRemoveComm5, tRPAdminPSAccActionRemoveComm6, tRPAdminPSAccActionRemoveComm7, tRPAdminPSAccActionRemoveComm8, tRPAdminPSAccActionRemoveComm9, tRPAdminPSAccActionRemoveComm10, tRPAdminPSAccActionRemoveComm11, tRPAdminPSAccActionRemoveComm12, tRPAdminPSAccActionRemoveComm13, tRPAdminPSAccActionRemoveComm14, tRPAdminPSAccActionRemoveComm15, tRPAdminPSAccActionRemoveComm16, tRPAdminPSAccActionRemoveComm17, tRPAdminPSAccActionRemoveComm18, tRPAdminPSAccActionRemoveComm19, tRPAdminPSAccActionRemoveComm20, tRPAdminPSAccActionRemoveComm21, tRPAdminPSAccActionRemoveComm22, tRPAdminPSAccActionRemoveComm23, tRPAdminPSAccActionRemoveComm24, tRPAdminPSAccActionRemoveComm25, tRPAdminPSAccActionRemoveComm26, tRPAdminPSAccActionRemoveComm27, tRPAdminPSAccActionRemoveComm28, tRPAdminPSAccActionReplaceComm1, tRPAdminPSAccActionReplaceComm2, tRPAdminPSAccActionReplaceComm3, tRPAdminPSAccActionReplaceComm4, tRPAdminPSAccActionReplaceComm5, tRPAdminPSAccActionReplaceComm6, tRPAdminPSAccActionReplaceComm7, tRPAdminPSAccActionReplaceComm8, tRPAdminPSAccActionReplaceComm9, tRPAdminPSAccActionReplaceComm10, tRPAdminPSAccActionReplaceComm11, tRPAdminPSAccActionReplaceComm12, tRPAdminPSAccActionReplaceComm13, tRPAdminPSAccActionReplaceComm14, tRPAdminPSAccActionReplaceComm15, tRPAdminPSAccActionReplaceComm16, tRPAdminPSAccActionReplaceComm17, tRPAdminPSAccActionReplaceComm18, tRPAdminPSAccActionReplaceComm19, tRPAdminPSAccActionReplaceComm20, tRPAdminPSAccActionReplaceComm21, tRPAdminPSAccActionReplaceComm22, tRPAdminPSAccActionReplaceComm23, tRPAdminPSAccActionReplaceComm24, tRPAdminPSAccActionReplaceComm25, tRPAdminPSAccActionReplaceComm26, tRPAdminPSAccActionReplaceComm27, tRPAdminPSAccActionReplaceComm28 } STATUS current DESCRIPTION "The group of objects supporting management of policy statements and action parameters on Nokia SROS series systems." ::= { tmnxRoutePolicyGroups 35 } tmnxRPPolicyEntryObjsV11v0Group OBJECT-GROUP OBJECTS { tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaProtocol, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaProtocol, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaProtocol, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaProtocol, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId, tRPOperPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaState, tRPOperPSFromCriteriaState } STATUS obsolete DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters and 'from' filter parameters on Nokia SROS SR series systems 11.0 release." ::= { tmnxRoutePolicyGroups 36 } tmnxRPPolicyObsoleteV11v0Group OBJECT-GROUP OBJECTS { tRPOperPSDefaultActionCommunity1, tRPOperPSDefaultActionCommunityName1, tRPOperPSDefaultActionCommunity2, tRPOperPSDefaultActionCommunityName2, tRPAdminPSDefaultActionCommunity1, tRPAdminPSDefaultActionCommunityName1, tRPAdminPSDefaultActionCommunity2, tRPAdminPSDefaultActionCommunityName2, tRPOperPSAcceptActionCommunity1, tRPOperPSAcceptActionCommunityName1, tRPOperPSAcceptActionCommunity2, tRPOperPSAcceptActionCommunityName2, tRPAdminPSAcceptActionCommunity1, tRPAdminPSAcceptActionCommunityName1, tRPAdminPSAcceptActionCommunity2, tRPAdminPSAcceptActionCommunityName2 } STATUS current DESCRIPTION "The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted in Nokia SROS series systems 11.0 release." ::= { tmnxRoutePolicyGroups 37 } tmnxRPPolicyObjectsV12v0Group OBJECT-GROUP OBJECTS { tRPAdminPSAcptActnSrcClassIndex, tRPAdminPSAcptActnDstClassIndex, tRPAdminPSDefActnSrcClassIndex, tRPAdminPSDefActnDstClassIndex, tRPOperPSAcptActnSrcClassIndex, tRPOperPSAcptActnDstClassIndex, tRPOperPSDefActnSrcClassIndex, tRPOperPSDefActnDstClassIndex, tRPAdminCommunityExprExactMatch, tRPOperCommunityExprExactMatch, tRPAdminPSFromCritExtMvpnType, tRPOperPSFromCritExtMvpnType, tRPAdminPSFromCritSrcAddrPfxList, tRPOperPSFromCritSrcAddrPfxList } STATUS current DESCRIPTION "The group of objects supporting management of policy statements on Nokia SROS series systems 12.0 release." ::= { tmnxRoutePolicyGroups 38 } tmnxRPPolicyVarObjectsGroup OBJECT-GROUP OBJECTS { tRPAdminPSPolicyVarRowStatus, tRPAdminPSPolicyVarValue, tRPOperPSPolicyVarRowStatus, tRPOperPSPolicyVarValue } STATUS current DESCRIPTION "The group of objects supporting management of variables in policy statements on Nokia SROS series systems 12.0 release." ::= { tmnxRoutePolicyGroups 39 } tmnxRPOperPSAcceptActionFCGroup OBJECT-GROUP OBJECTS { tRPOperPSAcceptActionFC, tRPOperPSAcceptActionFCPriority } STATUS current DESCRIPTION "The group of objects supporting management of acceptance action statistics policy statements on Nokia SROS series systems 12.0 release." ::= { tmnxRoutePolicyGroups 40 } tRPAdminPSAcceptOrigValidGroup OBJECT-GROUP OBJECTS { tRPAdminPSAcptActnOrigValidState, tRPOperPSAcptActnOrigValidState, tRPAdminPSDefActnOrigValidState, tRPOperPSDefActnOrigValidState, tRPAdminPSFromCritOrigValidState, tRPOperPSFromCritOrigValidState } STATUS current DESCRIPTION "The group of objects supporting management of origin validation state for policy statements on Nokia SROS series system 12.0 release." ::= { tmnxRoutePolicyGroups 41 } tmnxRPCreationOriginGroup OBJECT-GROUP OBJECTS { tRPOperCommunityCreationOrigin, tRPOperPolicyStatementCrOrigin, tRPOperPSParamsCreationOrigin, tRPOperPSFromCritCreationOrigin, tRPOperPSAccActionAddCommCrOrig, tRPAdminCommunityCreationOrigin, tRPAdminPolicyStatementCrOrigin, tRPAdminPSParamsCreationOrigin, tRPAdminPSFromCritCreationOrigin, tRPAdminPSAccActionAddCommCrOrig } STATUS current DESCRIPTION "The group of objects supporting management of policy statements creation origin objects on Nokia SROS series systems 12.0 release." ::= { tmnxRoutePolicyGroups 42 } tmnxRPStickyEcmpGroup OBJECT-GROUP OBJECTS { tRPOperPSAcptActStickyEcmp, tRPOperPSDefActStickyEcmp, tRPAdminPSAcptActStickyEcmp, tRPAdminPSDefActStickyEcmp } STATUS current DESCRIPTION "The group of objects supporting management of policy statements sticky ECMP hash objects on Nokia SROS series systems 12.0 release." ::= { tmnxRoutePolicyGroups 43 } tmnxRPFlowSpecGroup OBJECT-GROUP OBJECTS { tRPOperPSFromCritFlowSrcPfxList, tRPOperPSFromCritFlowDstPfxList, tRPAdminPSFromCritFlowSrcPfxList, tRPAdminPSFromCritFlowDstPfxList } STATUS current DESCRIPTION "The group of objects supporting management of policy statements flow-spec objects on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 44 } tmnxRPAddPathsGroup OBJECT-GROUP OBJECTS { tRPAdminPSAcptActAddPathSndLimit, tRPOperPSAcptActAddPathSendLimit, tRPAdminPSDefActAddPathSendLimit, tRPOperPSDefActAddPathSendLimit } STATUS current DESCRIPTION "The group of objects supporting management of policy statements ADD-PATHS objects on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 45 } tmnxRPBackupPathGroup OBJECT-GROUP OBJECTS { tRPAdminPSAcptActInstBackupPath, tRPOperPSAcptActInstBackupPath, tRPAdminPSDefActInstBackupPath, tRPOperPSDefActInstBackupPath } STATUS current DESCRIPTION "The group of objects supporting management of policy statements backup path objects on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 46 } tmnxRPPrefixListV13v0Group OBJECT-GROUP OBJECTS { tRPAdminPfxListNameRowStatus, tRPOperPfxListNameRowStatus } STATUS current DESCRIPTION "The group of objects supporting management of Prefix List objects on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 47 } tmnxRPAdvertiseLabelGroup OBJECT-GROUP OBJECTS { tRPAdminPSAcptActAdvertiseLabel, tRPOperPSAcptActAdvertiseLabel, tRPAdminPSDefActAdvertiseLabel, tRPOperPSDefActAdvertiseLabel } STATUS current DESCRIPTION "The group of objects supporting management of policy statements advertise label objects on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 48 } tmnxRPBgpLeakingGroup OBJECT-GROUP OBJECTS { tRPAdminPSAcptActBgpLeaking, tRPOperPSAcptActBgpLeaking, tRPAdminPSDefActBgpLeaking, tRPOperPSDefActBgpLeaking } STATUS current DESCRIPTION "The group of objects supporting management of policy statements BGP leaking objects on Nokia SROS series systems 12.0 release." ::= { tmnxRoutePolicyGroups 50 } tmnxRPPolicyVarExtGroup OBJECT-GROUP OBJECTS { tRPAdminPSPolicyVarNumber, tRPAdminPSPolicyVarType, tRPAdminPSPolicyVarAddressType, tRPAdminPSPolicyVarAddress, tRPOperPSPolicyVarNumber, tRPOperPSPolicyVarType, tRPOperPSPolicyVarAddressType, tRPOperPSPolicyVarAddress, tRPAdminPSAcptActAigpMetricSrc, tRPAdminPSAcptActAigpMetricParam, tRPOperPSAcptActAigpMetricSource, tRPOperPSAcptActAigpMetricParam, tRPAdminPSDefActAigpMetricSource, tRPAdminPSDefActAigpMetricParam, tRPOperPSDefActAigpMetricSource, tRPOperPSDefActAigpMetricParam, tRPAdminPSAcptActASPathPendSrc, tRPAdminPSAcptActASPathPendParam, tRPOperPSAcptActASPathPendSource, tRPOperPSAcptActASPathPendParam, tRPAdminPSDefActASPathPendSource, tRPAdminPSDefActASPathPendParam, tRPOperPSDefActASPathPendSource, tRPOperPSDefActASPathPendParam, tRPOperPSAcptActLocalPrefSource, tRPOperPSAcptActLocalPrefParam, tRPAdminPSAcptActLocalPrefSource, tRPAdminPSAcptActLocalPrefParam, tRPOperPSDefActLocalPrefSource, tRPOperPSDefActLocalPrefParam, tRPAdminPSDefActLocalPrefSource, tRPAdminPSDefActLocalPrefParam, tRPOperPSAcptActMetricParam, tRPAdminPSAcptActMetricParam, tRPOperPSDefActMetricParam, tRPAdminPSDefActMetricParam, tRPOperPSAcptActNextHopSource, tRPOperPSAcptActNextHopParam, tRPAdminPSAcptActNextHopSource, tRPAdminPSAcptActNextHopParam, tRPOperPSDefActNextHopSource, tRPOperPSDefActNextHopParam, tRPAdminPSDefActNextHopSource, tRPAdminPSDefActNextHopParam, tRPOperPSAcptActOriginSource, tRPOperPSAcptActOriginParam, tRPAdminPSAcptActOriginSource, tRPAdminPSAcptActOriginParam, tRPOperPSDefActOriginSource, tRPOperPSDefActOriginParam, tRPAdminPSDefActOriginSource, tRPAdminPSDefActOriginParam, tRPOperPSAcptActOrigValStateSrc, tRPOperPSAcptActOrigValStatePar, tRPAdminPSAcptActOrigValStateSrc, tRPAdminPSAcptActOrigValStatePar, tRPOperPSDefActOrigValStateSrc, tRPOperPSDefActOrigValStatePar, tRPAdminPSDefActOrigValStateSrc, tRPAdminPSDefActOrigValStatePar, tRPOperPSAcptActPreferenceSource, tRPOperPSAcptActPreferenceParam, tRPAdminPSAcptActPreferenceSrc, tRPAdminPSAcptActPreferenceParam, tRPOperPSDefActPreferenceSource, tRPOperPSDefActPreferenceParam, tRPAdminPSDefActPreferenceSource, tRPAdminPSDefActPreferenceParam, tRPOperPSAcptActTagSource, tRPOperPSAcptActTagParam, tRPAdminPSAcptActTagSource, tRPAdminPSAcptActTagParam, tRPOperPSDefActTagSource, tRPOperPSDefActTagParam, tRPAdminPSDefActTagSource, tRPAdminPSDefActTagParam, tRPOperPSAcptActOspfTypeSource, tRPOperPSAcptActOspfTypeParam, tRPAdminPSAcptActOspfTypeSource, tRPAdminPSAcptActOspfTypeParam, tRPOperPSDefActOspfTypeSource, tRPOperPSDefActOspfTypeParam, tRPAdminPSDefActOspfTypeSource, tRPAdminPSDefActOspfTypeParam } STATUS current DESCRIPTION "The group of objects supporting management of variables extension in policy statements on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 51 } tmnxRPPSCondRouteGroup OBJECT-GROUP OBJECTS { tRPOperPSCondExprRowStatus, tRPOperPSCondExprRtExistString1, tRPAdminPSCondExprRowStatus, tRPAdminPSCondExprRtExistString1 } STATUS current DESCRIPTION "The group of objects supporting management of BGP conditional route advertisement in policy statements on Nokia SROS series systems 13.0 release." ::= { tmnxRoutePolicyGroups 52 } tmnxRPASPathGroupV14v0Group OBJECT-GROUP OBJECTS { tRPOperASPathGroupRowStatus, tRPOperASPathGroupASPathRegEx, tRPAdminASPathGroupRowStatus, tRPAdminASPathGroupASPathRegEx, tRPOperPSFromCritASPathGroup, tRPAdminPSFromCritASPathGroup } STATUS current DESCRIPTION "The group of objects supporting management of AS-Path Groups on Nokia SROS series systems since release 14.0." ::= { tmnxRoutePolicyGroups 53 } tmnxRPPolicyObsoleteV14v0Group OBJECT-GROUP OBJECTS { tRPOperASPathGroupASPathName, tRPAdminASPathGroupASPathName, tRPOperPSToCriteriaProtocol, tRPOperPSFromCriteriaProtocol, tRPAdminPSToCriteriaProtocol, tRPAdminPSFromCriteriaProtocol } STATUS current DESCRIPTION "The group of objects in TIMETRA-ROUTE-POLICY-MIB which are obsoleted in Nokia SROS series systems 14.0 release." ::= { tmnxRoutePolicyGroups 54 } tmnxRPPSCriteriaObjsV14v0Group OBJECT-GROUP OBJECTS { tRPOperPSToCriteriaRowStatus, tRPOperPSToCriteriaNeighborIpAddr, tRPOperPSToCriteriaNeighborPrefixList, tRPOperPSToCriteriaIsisLevel, tRPOperPSToCriteriaPrefixList1, tRPOperPSToCriteriaPrefixList2, tRPOperPSToCriteriaPrefixList3, tRPOperPSToCriteriaPrefixList4, tRPOperPSToCriteriaPrefixList5, tRPOperPSToCritNbrInetAddrType, tRPOperPSToCritNbrInetAddr, tRPOperPSToCriteriaInstanceId, tRPOperPSToCritProtocolBits, tRPOperPSFromCriteriaRowStatus, tRPOperPSFromCriteriaNeighborIpAddr, tRPOperPSFromCriteriaNeighborPrefixList, tRPOperPSFromCriteriaPrefixList1, tRPOperPSFromCriteriaPrefixList2, tRPOperPSFromCriteriaPrefixList3, tRPOperPSFromCriteriaPrefixList4, tRPOperPSFromCriteriaPrefixList5, tRPOperPSFromCriteriaASPath, tRPOperPSFromCriteriaCommunity, tRPOperPSFromCriteriaOrigin, tRPOperPSFromCriteriaOspfRouteType, tRPOperPSFromCriteriaArea, tRPOperPSFromCriteriaAreaConfigured, tRPOperPSFromCriteriaIsisLevel, tRPOperPSFromCriteriaIsisExternal, tRPOperPSFromCriteriaIgmpHostPrefixList, tRPOperPSFromCriteriaGrpAddrPrefixList, tRPOperPSFromCriteriaSrcAddr, tRPOperPSFromCriteriaInterface, tRPOperPSFromCriteriaTag, tRPOperPSFromCritNbrInetAddrType, tRPOperPSFromCritNbrInetAddr, tRPOperPSFromCritSrcInetAddrType, tRPOperPSFromCritSrcInetAddr, tRPOperPSFromCriteriaFamily, tRPOperPSFromCriteriaInstanceId, tRPOperPSFromCritProtocolBits, tRPAdminPSToCriteriaRowStatus, tRPAdminPSToCriteriaNeighborIpAddr, tRPAdminPSToCriteriaNeighborPrefixList, tRPAdminPSToCriteriaIsisLevel, tRPAdminPSToCriteriaPrefixList1, tRPAdminPSToCriteriaPrefixList2, tRPAdminPSToCriteriaPrefixList3, tRPAdminPSToCriteriaPrefixList4, tRPAdminPSToCriteriaPrefixList5, tRPAdminPSToCritNbrInetAddrType, tRPAdminPSToCritNbrInetAddr, tRPAdminPSToCriteriaInstanceId, tRPAdminPSToCritProtocolBits, tRPAdminPSFromCriteriaRowStatus, tRPAdminPSFromCriteriaNeighborIpAddr, tRPAdminPSFromCriteriaNeighborPrefixList, tRPAdminPSFromCriteriaPrefixList1, tRPAdminPSFromCriteriaPrefixList2, tRPAdminPSFromCriteriaPrefixList3, tRPAdminPSFromCriteriaPrefixList4, tRPAdminPSFromCriteriaPrefixList5, tRPAdminPSFromCriteriaASPath, tRPAdminPSFromCriteriaCommunity, tRPAdminPSFromCriteriaOrigin, tRPAdminPSFromCriteriaOspfRouteType, tRPAdminPSFromCriteriaArea, tRPAdminPSFromCriteriaAreaConfigured, tRPAdminPSFromCriteriaIsisLevel, tRPAdminPSFromCriteriaIsisExternal, tRPAdminPSFromCriteriaIgmpHostPrefixList, tRPAdminPSFromCriteriaGrpAddrPrefixList, tRPAdminPSFromCriteriaSrcAddr, tRPAdminPSFromCriteriaInterface, tRPAdminPSFromCriteriaTag, tRPAdminPSFromCritNbrInetAddrType, tRPAdminPSFromCritNbrInetAddr, tRPAdminPSFromCritSrcInetAddrType, tRPAdminPSFromCritSrcInetAddr, tRPAdminPSFromCriteriaFamily, tRPAdminPSFromCriteriaInstanceId, tRPOperPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaMatchTag, tRPAdminPSFromCriteriaState, tRPOperPSFromCriteriaState, tRPAdminPSFromCritProtocolBits, tRPOperPSFromCritPathType, tRPAdminPSFromCritPathType } STATUS current DESCRIPTION "The group of objects supporting management of route policy statement entries, 'to' filter parameters and 'from' filter parameters on Nokia SROS SR series systems 14.0 release." ::= { tmnxRoutePolicyGroups 56 } tmnxRPCreationOriginV14v0Group OBJECT-GROUP OBJECTS { tRPAdminDampingCreationOrigin, tRPOperDampingCreationOrigin, tRPOperASPathCreationOrigin, tRPAdminASPathCreationOrigin, tRPOperInetPrefixListCrOrigin, tRPAdminInetPrefixListCrOrigin, tRPOperASPathGroupCrOrigin, tRPAdminASPathGroupCrOrigin, tRPOperPfxListNameCrOrigin, tRPAdminPfxListNameCrOrigin } STATUS current DESCRIPTION "The group of objects supporting management of creation origin objects on Nokia SROS series systems 14.0 release." ::= { tmnxRoutePolicyGroups 57 } tmnxRPPolicyExtV15v0Group OBJECT-GROUP OBJECTS { tRPOperPSFromCritASPathLength, tRPOperPSFromCritASPathLenInd, tRPOperPSFromCritASPLenUnique, tRPOperPSFromCritCommunityCount, tRPOperPSFromCritCommCountInd, tRPOperPSFromCritCommCountType, tRPOperPSFromCritMetric, tRPOperPSFromCritMetricInd, tRPOperPSFromCritLocalPref, tRPOperPSFromCritLocalPrefInd, tRPOperPSFromCritClusterAddrTp1, tRPOperPSFromCritClusterAddr1, tRPOperPSFromCritClusterPfxLen1, tRPOperPSFromCritClusterAddrTp2, tRPOperPSFromCritClusterAddr2, tRPOperPSFromCritClusterPfxLen2, tRPOperPSFromCritClusterAddrTp3, tRPOperPSFromCritClusterAddr3, tRPOperPSFromCritClusterPfxLen3, tRPOperPSFromCritClusterAddrTp4, tRPOperPSFromCritClusterAddr4, tRPOperPSFromCritClusterPfxLen4, tRPOperPSFromCritClusterAddrTp5, tRPOperPSFromCritClusterAddr5, tRPOperPSFromCritClusterPfxLen5, tRPOperPSFromCritClusterIdNone, tRPOperPSFromCritNextHopAddrTyp, tRPOperPSFromCritNextHopAddr, tRPOperPSFromCritNextHopPfxList, tRPAdminPSFromCritASPathLength, tRPAdminPSFromCritASPathLenInd, tRPAdminPSFromCritASPLenUnique, tRPAdminPSFromCritCommunityCount, tRPAdminPSFromCritCommCountInd, tRPAdminPSFromCritCommCountType, tRPAdminPSFromCritMetric, tRPAdminPSFromCritMetricInd, tRPAdminPSFromCritLocalPref, tRPAdminPSFromCritLocalPrefInd, tRPAdminPSFromCritClusterAddrTp1, tRPAdminPSFromCritClusterAddr1, tRPAdminPSFromCritClusterPfxLen1, tRPAdminPSFromCritClusterAddrTp2, tRPAdminPSFromCritClusterAddr2, tRPAdminPSFromCritClusterPfxLen2, tRPAdminPSFromCritClusterAddrTp3, tRPAdminPSFromCritClusterAddr3, tRPAdminPSFromCritClusterPfxLen3, tRPAdminPSFromCritClusterAddrTp4, tRPAdminPSFromCritClusterAddr4, tRPAdminPSFromCritClusterPfxLen4, tRPAdminPSFromCritClusterAddrTp5, tRPAdminPSFromCritClusterAddr5, tRPAdminPSFromCritClusterPfxLen5, tRPAdminPSFromCritClusterIdNone, tRPAdminPSFromCritNextHopAddrTyp, tRPAdminPSFromCritNextHopAddr, tRPAdminPSFromCritNextHopPfxList, tRPOperPSAcptActASPPendCountSrc, tRPOperPSAcptActASPPendCountPar, tRPOperPSAcptActASPPndMstRecent, tRPAdminPSAcptActASPPendCountSrc, tRPAdminPSAcptActASPPendCountPar, tRPAdminPSAcptActASPPndMstRecent, tRPOperPSDefActASPPendCountSrc, tRPOperPSDefActASPPendCountPar, tRPOperPSDefActASPPndMstRecent, tRPAdminPSDefActASPPendCountSrc, tRPAdminPSDefActASPPendCountPar, tRPAdminPSDefActASPPndMstRecent, tRPOperPSAcptActCreateUdpTunnel, tRPAdminPSAcptActCreateUdpTunnel, tRPOperPSDefActCreateUdpTunnel, tRPAdminPSDefActCreateUdpTunnel, tRPAdminASPGroupNameRowStatus, tRPAdminASPGroupNameCrOrigin, tRPOperASPGroupNameRowStatus, tRPOperASPGroupNameCrOrigin, tRPAdminCommNameRowStatus, tRPAdminCommNameCrOrigin, tRPOperCommNameRowStatus, tRPOperCommNameCrOrigin } STATUS current DESCRIPTION "The group of objects supporting management of policy extension objects on Nokia SROS series systems 15.0 release." ::= { tmnxRoutePolicyGroups 58 } tmnxRPPolicyExtV16v0Group OBJECT-GROUP OBJECTS { tRPOperGlobalVarRowStatus, tRPOperGlobalVarType, tRPOperGlobalVarString, tRPOperGlobalVarNumber, tRPOperGlobalVarAddressType, tRPOperGlobalVarAddress, tRPAdminGlobalVarRowStatus, tRPAdminGlobalVarType, tRPAdminGlobalVarString, tRPAdminGlobalVarNumber, tRPAdminGlobalVarAddressType, tRPAdminGlobalVarAddress, tRPOperPSAcptActResolveStatic, tRPOperPSDefActResolveStatic, tRPAdminPSAcptActResolveStatic, tRPAdminPSDefActResolveStatic, tRPOperPSAcptActAdminTagPolicy, tRPOperPSDefActAdminTagPolicy, tRPAdminPSAcptActAdminTagPolicy, tRPAdminPSDefActAdminTagPolicy, tRPOperPSFromCritExtEvpnType, tRPAdminPSFromCritExtEvpnType } STATUS current DESCRIPTION "The group of objects supporting management of policy extension objects on Nokia SROS series systems 16.0 release." ::= { tmnxRoutePolicyGroups 59 } tmnxRPPfxListExtV16v0Group OBJECT-GROUP OBJECTS { tRPOperPSToCritPrefixList1, tRPOperPSToCritPrefixList2, tRPOperPSToCritPrefixList3, tRPOperPSToCritPrefixList4, tRPOperPSToCritPrefixList5, tRPOperPSToCritPrefixList6, tRPOperPSToCritPrefixList7, tRPOperPSToCritPrefixList8, tRPOperPSToCritPrefixList9, tRPOperPSToCritPrefixList10, tRPOperPSToCritPrefixList11, tRPOperPSToCritPrefixList12, tRPOperPSToCritPrefixList13, tRPOperPSToCritPrefixList14, tRPOperPSToCritPrefixList15, tRPOperPSToCritPrefixList16, tRPOperPSToCritPrefixList17, tRPOperPSToCritPrefixList18, tRPOperPSToCritPrefixList19, tRPOperPSToCritPrefixList20, tRPOperPSToCritPrefixList21, tRPOperPSToCritPrefixList22, tRPOperPSToCritPrefixList23, tRPOperPSToCritPrefixList24, tRPOperPSToCritPrefixList25, tRPOperPSToCritPrefixList26, tRPOperPSToCritPrefixList27, tRPOperPSToCritPrefixList28, tRPOperPSFromCritPrefixList1, tRPOperPSFromCritPrefixList2, tRPOperPSFromCritPrefixList3, tRPOperPSFromCritPrefixList4, tRPOperPSFromCritPrefixList5, tRPOperPSFromCritPrefixList6, tRPOperPSFromCritPrefixList7, tRPOperPSFromCritPrefixList8, tRPOperPSFromCritPrefixList9, tRPOperPSFromCritPrefixList10, tRPOperPSFromCritPrefixList11, tRPOperPSFromCritPrefixList12, tRPOperPSFromCritPrefixList13, tRPOperPSFromCritPrefixList14, tRPOperPSFromCritPrefixList15, tRPOperPSFromCritPrefixList16, tRPOperPSFromCritPrefixList17, tRPOperPSFromCritPrefixList18, tRPOperPSFromCritPrefixList19, tRPOperPSFromCritPrefixList20, tRPOperPSFromCritPrefixList21, tRPOperPSFromCritPrefixList22, tRPOperPSFromCritPrefixList23, tRPOperPSFromCritPrefixList24, tRPOperPSFromCritPrefixList25, tRPOperPSFromCritPrefixList26, tRPOperPSFromCritPrefixList27, tRPOperPSFromCritPrefixList28, tRPAdminPSToCritPrefixList1, tRPAdminPSToCritPrefixList2, tRPAdminPSToCritPrefixList3, tRPAdminPSToCritPrefixList4, tRPAdminPSToCritPrefixList5, tRPAdminPSToCritPrefixList6, tRPAdminPSToCritPrefixList7, tRPAdminPSToCritPrefixList8, tRPAdminPSToCritPrefixList9, tRPAdminPSToCritPrefixList10, tRPAdminPSToCritPrefixList11, tRPAdminPSToCritPrefixList12, tRPAdminPSToCritPrefixList13, tRPAdminPSToCritPrefixList14, tRPAdminPSToCritPrefixList15, tRPAdminPSToCritPrefixList16, tRPAdminPSToCritPrefixList17, tRPAdminPSToCritPrefixList18, tRPAdminPSToCritPrefixList19, tRPAdminPSToCritPrefixList20, tRPAdminPSToCritPrefixList21, tRPAdminPSToCritPrefixList22, tRPAdminPSToCritPrefixList23, tRPAdminPSToCritPrefixList24, tRPAdminPSToCritPrefixList25, tRPAdminPSToCritPrefixList26, tRPAdminPSToCritPrefixList27, tRPAdminPSToCritPrefixList28, tRPAdminPSFromCritPrefixList1, tRPAdminPSFromCritPrefixList2, tRPAdminPSFromCritPrefixList3, tRPAdminPSFromCritPrefixList4, tRPAdminPSFromCritPrefixList5, tRPAdminPSFromCritPrefixList6, tRPAdminPSFromCritPrefixList7, tRPAdminPSFromCritPrefixList8, tRPAdminPSFromCritPrefixList9, tRPAdminPSFromCritPrefixList10, tRPAdminPSFromCritPrefixList11, tRPAdminPSFromCritPrefixList12, tRPAdminPSFromCritPrefixList13, tRPAdminPSFromCritPrefixList14, tRPAdminPSFromCritPrefixList15, tRPAdminPSFromCritPrefixList16, tRPAdminPSFromCritPrefixList17, tRPAdminPSFromCritPrefixList18, tRPAdminPSFromCritPrefixList19, tRPAdminPSFromCritPrefixList20, tRPAdminPSFromCritPrefixList21, tRPAdminPSFromCritPrefixList22, tRPAdminPSFromCritPrefixList23, tRPAdminPSFromCritPrefixList24, tRPAdminPSFromCritPrefixList25, tRPAdminPSFromCritPrefixList26, tRPAdminPSFromCritPrefixList27, tRPAdminPSFromCritPrefixList28 } STATUS current DESCRIPTION "The group of objects supporting management of policy prefix-list match criteria extension objects on Nokia SROS series systems 16.0 release." ::= { tmnxRoutePolicyGroups 60 } tmnxRPPolicyExtV19v0Group OBJECT-GROUP OBJECTS { tRPOperPSPolicyVarDecimal, tRPAdminPSPolicyVarDecimal, tRPOperGlobalVarDecimal, tRPAdminGlobalVarDecimal, tRPOperPSDefActBgpMedSource, tRPOperPSDefActBgpMedValue, tRPOperPSDefActBgpMedExpr, tRPOperPSAcptActBgpMedSource, tRPOperPSAcptActBgpMedValue, tRPOperPSAcptActBgpMedExpr, tRPAdminPSDefActBgpMedSource, tRPAdminPSDefActBgpMedValue, tRPAdminPSDefActBgpMedExpr, tRPAdminPSAcptActBgpMedSource, tRPAdminPSAcptActBgpMedValue, tRPAdminPSAcptActBgpMedExpr, tRPOperPSDefActDisableRtInstall, tRPOperPSAcptActDisableRtInstall, tRPAdminPSDefActDisableRtInstall, tRPAdminPSAcptActDisableRtInst, tRPOperPSDefActSrLabelIndex, tRPOperPSDefActSrLblIndPrefIgp, tRPOperPSAcptActSrLabelIndex, tRPOperPSAcptActSrLblIndPrefIgp, tRPAdminPSDefActSrLabelIndex, tRPAdminPSDefActSrLblIndPrefIgp, tRPAdminPSAcptActSrLabelIndex, tRPAdminPSAcptActSrLblIndPrefIgp } STATUS current DESCRIPTION "The group of objects supporting management of policy extension objects on Nokia SROS series systems 19.0 release." ::= { tmnxRoutePolicyGroups 61 } tmnxRPPolicyV20v0Group OBJECT-GROUP OBJECTS { tRPOperPSDefActNextHopPeerAddr, tRPOperPSAcptActNextHopPeerAddr, tRPAdminPSDefActNextHopPeerAddr, tRPAdminPSAcptActNextHopPeerAddr, tRPOperPSDefActBgpHighPriority, tRPOperPSAcptActBgpHighPriority, tRPAdminPSDefActBgpHighPriority, tRPAdminPSAcptActBgpHighPriority, tRPOperPSFromCrAggrContributor, tRPAdminPSFromCrAggrContributor, tRPOperPSDefActFlexAlgo, tRPOperPSAcptActFlexAlgo, tRPAdminPSDefActFlexAlgo, tRPAdminPSAcptActFlexAlgo, tRPOperPSDefActBgpTunnelMetric, tRPOperPSDefActBgpTMetPrefAigp, tRPOperPSAcptActBgpTunnelMetric, tRPOperPSAcptActBgpTMetPrefAigp, tRPAdminPSDefActBgpTunnelMetric, tRPAdminPSDefActBgpTMetPrefAigp, tRPAdminPSAcptActBgpTunnelMetric, tRPAdminPSAcptActBgpTMetPrefAigp, tRPOperPfxListToCrOrigin, tRPOperPfxListToRowStatus, tRPAdminPfxListToCrOrigin, tRPAdminPfxListToRowStatus, tRPOperPfxListAddrMaskRowStatus, tRPOperPfxListAddrMaskCrOrigin, tRPAdminPfxListAddrMaskRowStatus, tRPAdminPfxListAddrMaskCrOrigin, tRPOperPSDefActEgressStats, tRPOperPSDefActIngressStats, tRPOperPSAcptActEgressStats, tRPOperPSAcptActIngressStats, tRPAdminPSDefActEgressStats, tRPAdminPSDefActIngressStats, tRPAdminPSAcptActEgressStats, tRPAdminPSAcptActIngressStats, tRPOperPSDefActSrMaintPolicy, tRPOperPSAcptActSrMaintPolicy, tRPAdminPSDefActSrMaintPolicy, tRPAdminPSAcptActSrMaintPolicy, tRPOperPSFromCrEndpointAddrTyp, tRPOperPSFromCrEndpointAddr, tRPOperPSFromCritColor, tRPOperPSFromCritDistinguisher, tRPAdminPSFromCrEndpointAddrTyp, tRPAdminPSFromCrEndpointAddr, tRPAdminPSFromCritColor, tRPAdminPSFromCritDistinguisher } STATUS current DESCRIPTION "The group of objects supporting management of route policy objects on Nokia SROS series systems 20.0 release." ::= { tmnxRoutePolicyGroups 62 } tmnxRoutePolicyDCCompliances OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 3 } tmnxRoutePolicyDCGroups OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 4 } tmnxRoutePolicyMobGwCompliances OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 5 } tmnxRoutePolicyMobGatewayGroups OBJECT IDENTIFIER ::= { tmnxRoutePolicyConformance 6 } tRoutePolicyNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 17 } tRoutePolicyNotifications OBJECT IDENTIFIER ::= { tRoutePolicyNotifyPrefix 0 } END