TIMETRA-OTU-MIB DEFINITIONS ::= BEGIN IMPORTS ifIndex FROM IF-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF Counter32, Counter64, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue FROM SNMPv2-TC timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs FROM TIMETRA-GLOBAL-MIB TmnxActionType FROM TIMETRA-TC-MIB ; tmnxOtuMIBModule MODULE-IDENTITY LAST-UPDATED "201501010000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia 7x50 Support Web: http://www.nokia.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the Optical Transport Unit (OTU) components of the Nokia SROS device. Copyright 2008-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201501010000Z" DESCRIPTION "Rev 13.0 1 Jan 2015 00:00 13.0 release of the TIMETRA-OTU-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-OTU-MIB." REVISION "200810230000Z" DESCRIPTION "Rev 1.0 01 Jul 2008 00:00 1.0 release of the TIMETRA-OTU-MIB." ::= { timetraSRMIBModules 62 } TmnxOtuFecMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuFecMode specifies what type of Forward Error Correction (FEC) has been enabled on the port. The valid types are as follows: - disabled - OTU encap enabled with no FEC. - g709fec - OTU encap enabled with G.709 FEC. - enhanced - OTU encap enabled with enhanced FEC." SYNTAX INTEGER { disabled (0), g709fec (1), enhanced (2) } TmnxOtu2LanDataRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtu2LanDataRate specifies the allowable data rates for a given OTU2 10GE-LAN enabled interface. The valid data rates are as follows: - notApplicable - not an OTU 10GE enabled interface. - dr11049 - 11.049 Gbps synchronous OTU encapsulated 10GE-LAN signal. (i.e. No fixed stuffing bytes in the OTU2 frame). - dr11096 - 11.0957 Gbps synchronous OTU encapsulated 10GE-LAN signal. (i.e. Fixed stuffing bytes in the OTU2 frame)." SYNTAX INTEGER { notApplicable (0), dr11049 (1), dr11096 (2) } TmnxOtuSFSDMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuSFSDMethod specifies the method to determine the Signal Failure (SF) and Signal Degradation (SD) of the interface. The valid methods are as follows: - fec - FEC correctable bit errors are used to declare the presence of the Signal Fail and Signal Degrade condition. - bip8 - the SM-BIP8 errors are used to declare the presence of the Signal Fail and Signal Degrade condition." SYNTAX INTEGER { fec (1), bip8 (2) } TmnxOtuTtiMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuTtiMode specifies the type of data transmitted in the Trail Trace Identifier (TTI) Section of the OTU frame. The valid modes are as follows: - auto - Specifies that the TTI Section is auto-generated by the system. - string - Specifies that the TTI Section is a sequence of printable-ascii. - bytes - Specifies that the TTI Section is a sequence of bytes." SYNTAX INTEGER { auto (0), string (1), bytes (2) } TmnxOtuTtiString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuTtiString specifies the data transmitted in the Trail Trace Identifier (TTI) Section of the OTU frame. The TTI Section may consist of octet values from the range 0..255 (0x00..0xFF)." SYNTAX OCTET STRING (SIZE (0..255)) TmnxOtuAlarms ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuAlarms specifies the alarms which are enabled or outstanding against an OTU enabled interface. The valid alarms are as follows: - loc - Loss of Clock. - los - Loss of Signal. - lof - Loss of OTU Framing. - lom - Loss of Multi-frame. - otuAis - OTU Alarm Indication Signal. - otuBerSf - OTU Bit Error Rate Signal Fail. - otuBerSd - OTU Bit Error Rate Signal Degradation. - otuBdi - OTU Backward Defect Indication. - otuTim - OTU Trace ID Mismatch. - otuIae - OTU Incoming Alignment Error. - otuBiae - OTU Backward Incoming Alignment Error. - fecSf - FEC Signal Failure. - fecSd - FEC Signal Degradation. - fecFail - FEC Rx/Tx mode mismatch (enhanced/g709fec) or High uncorrectable bit rate (>10E-2). - fecUncorr - One or more uncorrectable FEC errors. - oduAis - Optical Data Unit (ODU) Alarm Indication Signal. - oduOci - ODU Open Connection Indication. - oduLck - ODU Locked. - oduBdi - PM Backward Defect Indication. - oduTim - PM Trace ID Mismatch. - opuPlm - OPU PSI Payload Type Mismatch." SYNTAX BITS { loc (0), los (1), lof (2), lom (3), otuAis (4), otuBerSf (5), otuBerSd (6), otuBdi (7), otuTim (8), otuIae (9), otuBiae (10), fecSf (11), fecSd (12), fecFail (13), fecUncorr (14), oduAis (15), oduOci (16), oduLck (17), oduBdi (18), oduTim (19), reserved20 (20), opuPlm (21) } TmnxOtuPsiPayloadType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuPsiPayloadType specifies the payload type identifier as defined in table 15-8 of section 15.9.2.1.1 of ITU-T Rec. G.709 and the codes are as follows: - auto - Automatic based on operating mode. - exp - Experimental mapping. - asyncCbr - Asynchronous CBR mapping. - syncCbr - Bit synchronous CBR mapping. - atm - ATM mapping. - gfp - GFP mapping. - vcat - Virtual Concatenated signal. - gmp - Generic Mapping Procedure. - bitStrOctet - Bit stream with octet timing mapping. - bitStrNoOctet - Bit stream without octet timing mapping. - oduMux - ODU multiplex structure. - rsvd80 - Reserved Proprietary 0x80 - rsvd81 - Reserved Proprietary 0x81 - rsvd82 - Reserved Proprietary 0x82 - rsvd83 - Reserved Proprietary 0x83 - rsvd84 - Reserved Proprietary 0x84 - rsvd85 - Reserved Proprietary 0x85 - rsvd86 - Reserved Proprietary 0x86 - rsvd87 - Reserved Proprietary 0x87 - rsvd88 - Reserved Proprietary 0x88 - rsvd89 - Reserved Proprietary 0x89 - rsvd8A - Reserved Proprietary 0x8A - rsvd8B - Reserved Proprietary 0x8B - rsvd8C - Reserved Proprietary 0x8C - rsvd8D - Reserved Proprietary 0x8D - rsvd8E - Reserved Proprietary 0x8E - rsvd8F - Reserved Proprietary 0x8F - nullTest - NULL test signal mapping. - prbsTest - PRBS test signal mapping." SYNTAX INTEGER { auto (0), exp (1), asyncCbr (2), syncCbr (3), atm (4), gfp (5), vcat (6), gmp (7), bitStrOctet (16), bitStrNoOctet (17), oduMux (32), rsvd80 (128), rsvd81 (129), rsvd82 (130), rsvd83 (131), rsvd84 (132), rsvd85 (133), rsvd86 (134), rsvd87 (135), rsvd88 (136), rsvd89 (137), rsvd8A (138), rsvd8B (139), rsvd8C (140), rsvd8D (141), rsvd8E (142), rsvd8F (143), nullTest (253), prbsTest (254) } TmnxOtuTimReaction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxOtuTimReaction specifies the type of reaction that should be taken in the event of Trace Identifier (TTI) Mismatch or Payload Type Mismatch. The valid modes are as follows: - none - Specifies that the Received Payload data should be passed through when a Trace Identifier Mismatch is detected. - squelch-rx - Specifies that the Received Payload data should be blocked with a maintenance signal when a Trace Identifier Mismatch is detected." SYNTAX INTEGER { none (0), squelchRx (1) } TmnxOtuIfOtu4SignalType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "TmnxOtuIfOtu4SignalType is an enumerated integer that specifies the signal type that can be provisioned on the OTU encapsulated physical interface. Values: 'notApplicable' - The provisioned port is not a DWDM line port. 'otu4' - The DWDM line port can transport one 100GbE client signal. 'otu4x2' - The DWDM line port can transport up to two 100GbE client signals." SYNTAX INTEGER { notApplicable (1), otu4 (2), otu4x2 (3) } tmnxOtuObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 62 } tmnxOtuConfigurationTimeStamps OBJECT IDENTIFIER ::= { tmnxOtuObjs 0 } tmnxOtuIfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The tmnxOtuIfTableLastChanged indicates the time, since system startup, when a row in the tmnxOtuIfTable last changed." ::= { tmnxOtuConfigurationTimeStamps 1 } tmnxOtuConfigurations OBJECT IDENTIFIER ::= { tmnxOtuObjs 1 } tmnxOtuIfTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxOtuIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfTable consists of the interfaces using OTU encapsulation." ::= { tmnxOtuConfigurations 1 } tmnxOtuIfEntry OBJECT-TYPE SYNTAX TmnxOtuIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfEntry contains information pertaining to an individual OTU encapsulated physical interface. Rows in this table are created and destroyed using the tmnxOtuIfRowStatus object." INDEX { ifIndex } ::= { tmnxOtuIfTable 1 } TmnxOtuIfEntry ::= SEQUENCE { tmnxOtuIfRowStatus RowStatus, tmnxOtuIfTimeStamp TimeStamp, tmnxOtuIfFecMode TmnxOtuFecMode, tmnxOtuIfSfSdMethod TmnxOtuSFSDMethod, tmnxOtuIfBerSfThreshold Unsigned32, tmnxOtuIfBerSdThreshold Unsigned32, tmnxOtuIfOtuOperDataRate Unsigned32, tmnxOtuIfOtu2LanDataRate TmnxOtu2LanDataRate, tmnxOtuIfCfgAlarms TmnxOtuAlarms, tmnxOtuIfAlarmState TmnxOtuAlarms, tmnxOtuIfHoldTimeUp Unsigned32, tmnxOtuIfHoldTimeDown Unsigned32, tmnxOtuIfSmTtiTxMode TmnxOtuTtiMode, tmnxOtuIfSmTtiTx TmnxOtuTtiString, tmnxOtuIfSmTtiRx TmnxOtuTtiString, tmnxOtuIfSmTtiExpMode TmnxOtuTtiMode, tmnxOtuIfSmTtiExpCopyRx TmnxActionType, tmnxOtuIfSmTtiExp TmnxOtuTtiString, tmnxOtuIfPmTtiTxMode TmnxOtuTtiMode, tmnxOtuIfPmTtiTx TmnxOtuTtiString, tmnxOtuIfPmTtiRx TmnxOtuTtiString, tmnxOtuIfPmTtiExpMode TmnxOtuTtiMode, tmnxOtuIfPmTtiExpCopyRx TmnxActionType, tmnxOtuIfPmTtiExp TmnxOtuTtiString, tmnxOtuIfPsiTtiTxMode TmnxOtuTtiMode, tmnxOtuIfPsiTtiTx TmnxOtuTtiString, tmnxOtuIfPsiTtiRx TmnxOtuTtiString, tmnxOtuIfPsiTtiExpMode TmnxOtuTtiMode, tmnxOtuIfPsiTtiExpCopyRx TmnxActionType, tmnxOtuIfPsiTtiExp TmnxOtuTtiString, tmnxOtuIfPsiPayloadTypeTx TmnxOtuPsiPayloadType, tmnxOtuIfPsiPayloadTypeRx TmnxOtuPsiPayloadType, tmnxOtuIfPsiPayloadTypeExp TmnxOtuPsiPayloadType, tmnxOtuIfGfpMappingEnable TruthValue, tmnxOtuIfAsyncMappingEnable TruthValue, tmnxOtuIfSmTimReaction TmnxOtuTimReaction, tmnxOtuIfPmTimReaction TmnxOtuTimReaction, tmnxOtuIfPsiTimReaction TmnxOtuTimReaction, tmnxOtuIfPsiPlmReaction TmnxOtuTimReaction } tmnxOtuIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The tmnxOtuIfRowStatus controls the creation and deletion of row entries in the tmnxOtuIfTable. Creating a row in the tmnxOtuIfTable using 'createAndGo (4)' enables OTU encapsulation for the interface. Deleting the row using 'destroy (6)' will disable the OTU encapsulation. If a physical port does not support the OTU encapsulation, an attempt to set the tmnxOtuIfRowStatus to a value of 'createAndGo (4)' will fail with an inconsistent value result." ::= { tmnxOtuIfEntry 1 } tmnxOtuIfTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The tmnxOtuIfTimeStamp indicates the time, since system startup, of the last change to this row." ::= { tmnxOtuIfEntry 2 } tmnxOtuIfFecMode OBJECT-TYPE SYNTAX TmnxOtuFecMode MAX-ACCESS read-create STATUS current DESCRIPTION "The tmnxOtuIfFecMode specifies the OTU encapsulation used by this interface." DEFVAL { enhanced } ::= { tmnxOtuIfEntry 3 } tmnxOtuIfSfSdMethod OBJECT-TYPE SYNTAX TmnxOtuSFSDMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The tmnxOtuIfSfSdMethod specifies the method on which to detect Signal Failure and Signal Degradation. tmnxOtuIfBerSfThreshold and tmnxOtuIfBerSdThreshold are only applicable when tmnxOtuIfSfSdMethod is bip8. When tmnxOtuIfSfSdMethod is fec, the associated tmnxOtuIfFineGrBerEntry is applicable." DEFVAL { fec } ::= { tmnxOtuIfEntry 4 } tmnxOtuIfBerSfThreshold OBJECT-TYPE SYNTAX Unsigned32 (3..6) UNITS "error bits in 1/10e-n bits received" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfBerSfThreshold specifies the bit error rate (BER) threshold used to determine when to raise and clear otuBerSf/fecSf alarms. Bit error computed must reach/exceed the threshold value over a predefined period of time for the alarms to be raised. This object is only applicable when tmnxOtuIfSfSdMethod is bip8. Each BIP8 coding violation counts as one bit error." DEFVAL { 5 } ::= { tmnxOtuIfEntry 5 } tmnxOtuIfBerSdThreshold OBJECT-TYPE SYNTAX Unsigned32 (5..9) UNITS "error bits in 1/10^n bits received" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfBerSdThreshold specifies the bit error rate (BER) threshold used to determine when to raise and clear otuBerSd/fecSd alarms. Bit error computed must reach/exceed the threshold value over a predefined period of time for the alarms to be raised. The object is only applicable when tmnxOtuIfSfSdMethod is bip8. Each BIP8 coding violation counts as one bit error." DEFVAL { 7 } ::= { tmnxOtuIfEntry 6 } tmnxOtuIfOtuOperDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "megabps" MAX-ACCESS read-only STATUS current DESCRIPTION "The tmnxOtuIfOtuOperDataRate indicates the rate at which the OTU data is transmitted on the line." ::= { tmnxOtuIfEntry 7 } tmnxOtuIfOtu2LanDataRate OBJECT-TYPE SYNTAX TmnxOtu2LanDataRate UNITS "gigabps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfOtu2LanDataRate specifies the rate at which data is transmitted on the line. An interface that does not support OTU2 encapsulation will default, and be restricted to, the value of 'notApplicable (0)'." DEFVAL { dr11049 } ::= { tmnxOtuIfEntry 8 } tmnxOtuIfCfgAlarms OBJECT-TYPE SYNTAX TmnxOtuAlarms MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfCfgAlarms specifies the alarms that are to be monitored by the OTU interface. If an alarm bit is set, then the corresponding alarm will raise/clear an alarm when its state changes. An unset bit specifies that the alarm corresponding with the bit will not alarm on its state transitions." DEFVAL { {loc, los, lof, lom, otuBdi, otuBerSf, fecSf} } ::= { tmnxOtuIfEntry 9 } tmnxOtuIfAlarmState OBJECT-TYPE SYNTAX TmnxOtuAlarms MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfAlarmState indicates which monitored alarms are raised against the OTU interface." ::= { tmnxOtuIfEntry 10 } tmnxOtuIfHoldTimeUp OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "deciseconds" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfHoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately." DEFVAL { 5 } ::= { tmnxOtuIfEntry 11 } tmnxOtuIfHoldTimeDown OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "deciseconds" MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfHoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately." DEFVAL { 0 } ::= { tmnxOtuIfEntry 12 } tmnxOtuIfSmTtiTxMode OBJECT-TYPE SYNTAX TmnxOtuTtiMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfSmTtiTxMode specifies the type of Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead. Specifying a tmnxOtuIfSmTtiTxMode value of 'auto (0)' along with tmnxOtuIfSmTtiTx set with a single octet of '0xFF' will revert the SM-TTI to the default: '////C'" ::= { tmnxOtuIfEntry 13 } tmnxOtuIfSmTtiTx OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfSmTtiTx specifies the Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead. This identifier can be a string or a non-printable sequence of bytes. Specifying a one octet string with the value '0xFF' along with a tmnxOtuIfSmTtiTxMode set to the value of 'auto (0)' will reset the TTI to the system generated value." ::= { tmnxOtuIfEntry 14 } tmnxOtuIfSmTtiRx OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfSmTtiRx indicates the Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the received OTU overhead." ::= { tmnxOtuIfEntry 15 } tmnxOtuIfSmTtiExpMode OBJECT-TYPE SYNTAX TmnxOtuTtiMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfSmTtiExpMode specifies the type of expected Trail Trace Identifier (TTI) for the Section Monitoring (SM) in the OTU overhead. Specifying a tmnxOtuIfSmTtiExpMode value of 'auto (0)' along with tmnxOtuIfSmTtiExp set with a single octet of '0xFF' will revert the SM-TTI to the default which is 'all zeros' in tmnxOtuIfSmTtiExp." ::= { tmnxOtuIfEntry 16 } tmnxOtuIfSmTtiExpCopyRx OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxOtuIfSmTtiExpCopyRx is used to copy the contents of tmnxOtuIfSmTtiRx into tmnxOtuIfSmTtiExp." ::= { tmnxOtuIfEntry 17 } tmnxOtuIfSmTtiExp OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfSmTtiExp specifies the Trail Trace Identifier (TTI) for the Section Monitoring (SM) that is expected to be received in the OTU overhead. A mismatch of the received and the expected SM TTI will cause an 'otuTim' alarm to be raised" ::= { tmnxOtuIfEntry 18 } tmnxOtuIfPmTtiTxMode OBJECT-TYPE SYNTAX TmnxOtuTtiMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPmTtiTxMode specifies the type of Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the OTU overhead. Specifying a tmnxOtuIfPmTtiTxMode value of 'auto (0)' along with tmnxOtuIfPmTtiTx set with a single octet of '0xFF' will revert the PM-TTI to the default: '////C'" ::= { tmnxOtuIfEntry 19 } tmnxOtuIfPmTtiTx OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPmTtiTx specifies the Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the OTU overhead. This identifier can be a string or a non-printable sequence of bytes. Specifying a one octet string with the value '0xFF' along with a tmnxOtuIfPmTtiTxMode set to the value of 'auto (0)' will reset the TTI to the system generated value." ::= { tmnxOtuIfEntry 20 } tmnxOtuIfPmTtiRx OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfPmTtiRx indicates the Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the received OTU overhead." ::= { tmnxOtuIfEntry 21 } tmnxOtuIfPmTtiExpMode OBJECT-TYPE SYNTAX TmnxOtuTtiMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPmTtiExpMode specifies the type of expected Trail Trace Identifier (TTI) for the Path Monitoring (PM) in the OTU overhead. Specifying a tmnxOtuIfPmTtiExpMode value of 'auto (0)' along with tmnxOtuIfPmTtiExp set with a single octet of '0xFF' will revert the PM-TTI to the default which is 'all zeros' in tmnxOtuIfPmTtiExp." ::= { tmnxOtuIfEntry 22 } tmnxOtuIfPmTtiExpCopyRx OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxOtuIfPmTtiExpCopyRx is used to copy the contents of tmnxOtuIfPmTtiRx into tmnxOtuIfPmTtiExp." ::= { tmnxOtuIfEntry 23 } tmnxOtuIfPmTtiExp OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPmTtiExp indicates the Trail Trace Identifier (TTI) for the Path Monitoring (PM) that is expected to be received in the OTU overhead. A mismatch of the received and the expected PM TTI will cause an 'oduTim' alarm to be raised" ::= { tmnxOtuIfEntry 24 } tmnxOtuIfPsiTtiTxMode OBJECT-TYPE SYNTAX TmnxOtuTtiMode MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfPsiTtiTxMode specifies the type of Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU overhead. Specifying a tmnxOtuIfPsiTtiTxMode value of 'auto (0)' along with tmnxOtuIfPsiTtiTx set with a single octet of '0xFF' will revert the PSI-TTI to the default: '////C' This object was made obsolete in SROS release 19.0." ::= { tmnxOtuIfEntry 25 } tmnxOtuIfPsiTtiTx OBJECT-TYPE SYNTAX TmnxOtuTtiString MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfPsiTtiTx specifies the Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the OTU overhead. This identifier can be a string or a non-printable sequence of bytes. Specifying a one octet string with the value '0xFF' along with a tmnxOtuIfPsiTtiTxMode set to the value of 'auto (0)' will reset the PSI Trace to the system generated value. This object was made obsolete in SROS release 19.0." ::= { tmnxOtuIfEntry 26 } tmnxOtuIfPsiTtiRx OBJECT-TYPE SYNTAX TmnxOtuTtiString MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxOtuIfPsiTtiRx indicates the Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) in the received OTU overhead. This object was made obsolete in SROS release 19.0." ::= { tmnxOtuIfEntry 27 } tmnxOtuIfPsiTtiExpMode OBJECT-TYPE SYNTAX TmnxOtuTtiMode MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfPsiTtiExpMode specifies the type of expected Trail Trace Identifier (TTI) Payload Structure Identifier (PSI) in the OTU overhead. Specifying a tmnxOtuIfPsiTtiExpMode value of 'auto (0)' along with tmnxOtuIfPsiTtiExp set with a single octet of '0xFF' will revert the PSI-TTI to the default which is 'all zeros' in tmnxOtuIfPsiTtiExp. This object was made obsolete in SROS release 19.0." ::= { tmnxOtuIfEntry 28 } tmnxOtuIfPsiTtiExpCopyRx OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS obsolete DESCRIPTION "tmnxOtuIfPsiTtiExpCopyRx is used to copy the contents of tmnxOtuIfPsiTtiRx into tmnxOtuIfPsiTtiExp. This object was made obsolete in SROS release 19.0." ::= { tmnxOtuIfEntry 29 } tmnxOtuIfPsiTtiExp OBJECT-TYPE SYNTAX TmnxOtuTtiString (SIZE (0..255)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfPsiTtiExp indicates the Trail Trace Identifier (TTI) for the Payload Structure Identifier (PSI) that is expected to be received in the OTU overhead. A mismatch of the received and the expected PSI Trace will cause an 'opuTim' alarm to be raised. This object was made obsolete in SROS release 19.0." ::= { tmnxOtuIfEntry 30 } tmnxOtuIfPsiPayloadTypeTx OBJECT-TYPE SYNTAX TmnxOtuPsiPayloadType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPsiPayloadTypeTx specifies the Payload Type in the transmitted OPU PSI overhead. Specifying a value 'auto (0)' will provision the standard defined payload type for the current OTU mode of operation." ::= { tmnxOtuIfEntry 31 } tmnxOtuIfPsiPayloadTypeRx OBJECT-TYPE SYNTAX TmnxOtuPsiPayloadType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfPsiPayloadTypeRx indicates the Payload Type in the received OPU PSI overhead." ::= { tmnxOtuIfEntry 32 } tmnxOtuIfPsiPayloadTypeExp OBJECT-TYPE SYNTAX TmnxOtuPsiPayloadType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPsiPayloadTypeExp indicates the Payload Type that is expected to be received in the OPU PSI overhead. Specifying a value 'auto (0)' will provision the standard defined payload type for the current OTU mode of operation. A mismatch of the received and the expected Payload type will cause an 'opuPlm' alarm to be raised" ::= { tmnxOtuIfEntry 33 } tmnxOtuIfGfpMappingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxOtuIfGfpMappingEnable specifies whether or not the GFP mapping mode of transporting 10GbE is enabled." DEFVAL { false } ::= { tmnxOtuIfEntry 34 } tmnxOtuIfAsyncMappingEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfAsyncMappingEnable specifies whether or not the Asynchronous mapping mode of transporting the OTU client is enabled. When this value is set to false, the OTU client is client is mapped Synchronously." DEFVAL { false } ::= { tmnxOtuIfEntry 35 } tmnxOtuIfSmTimReaction OBJECT-TYPE SYNTAX TmnxOtuTimReaction MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfSmTimReaction specifies the reaction that should be taken in the event of a Section Monitor Trace Identifier Mismatch. Specifying a value 'none (0)' indicates that no reaction should occur and therefore the ingress data will be passed through in the event of a Section Monitor Trace Identifier mismatch. Specifying a value 'squelch-rx (1)' indicates that the incoming data will be squelched and therefore the ingress data will be blocked with a maintenance signal in the event of a Section Monitor Trace Identifier mismatch." DEFVAL { none } ::= { tmnxOtuIfEntry 36 } tmnxOtuIfPmTimReaction OBJECT-TYPE SYNTAX TmnxOtuTimReaction MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPmTimReaction specifies the reaction that should be taken in the event of a Path Monitor Trace Identifier Mismatch. Specifying a value 'none (0)' indicates that no reaction should occur and therefore the ingress data will be passed through in the event of a Path Monitor Trace Identifier mismatch. Specifying a value 'squelch-rx (1)' indicates that the incoming data will be squelched and therefore the ingress data will be blocked with a maintenance signal in the event of a Path Monitor Trace Identifier mismatch." DEFVAL { none } ::= { tmnxOtuIfEntry 37 } tmnxOtuIfPsiTimReaction OBJECT-TYPE SYNTAX TmnxOtuTimReaction MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of tmnxOtuIfPsiTimReaction specifies the reaction that should be taken in the event of a Payload Structure Identifier Trace Mismatch. Specifying a value 'none (0)' indicates that no reaction should occur and therefore the ingress data will be passed through in the event of a Payload Structure Identifier Trace mismatch. Specifying a value 'squelch-rx (1)' indicates that the incoming data will be squelched and therefore the ingress data will be blocked with a maintenance signal in the event of a Payload Structure Identifier Trace mismatch. This object was made obsolete in SROS release 19.0." DEFVAL { none } ::= { tmnxOtuIfEntry 38 } tmnxOtuIfPsiPlmReaction OBJECT-TYPE SYNTAX TmnxOtuTimReaction MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxOtuIfPsiPlmReaction specifies the reaction that should be taken in the event of a Payload Type mismatch. Specifying a value 'none (0)' indicates that no reaction should occur and therefore the ingress data will be passed through in the event of a Payload Type mismatch. Specifying a value 'squelch-rx (1)' indicates that the incoming data will be squelched and therefore the ingress data will be blocked with a maintenance signal in the event of a Payload Type mismatch." DEFVAL { none } ::= { tmnxOtuIfEntry 39 } tmnxOtuIfFineGrBerTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxOtuIfFineGrBerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfFineGrBerTable has a row for each interface with OTU encapsulation and contains configuration parameters related to fine granularity pre-FEC BER SD and SF thresholds." ::= { tmnxOtuConfigurations 2 } tmnxOtuIfFineGrBerEntry OBJECT-TYPE SYNTAX TmnxOtuIfFineGrBerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfFineGrBerEntry contains fine granularity pre-FEC BER SD and SF threshold information for an individual OTU encapsulated physical interface. For the coefficient MIB attributes, 10 represents 1.0 and 99 represents 9.9. The combination of the SF/SD threshold coefficient and exponent form a number: coefficient x 10^-exponent; therefore, by example, a tmnxOtuIfFineGrBerSfThresh value of 4 and a tmnxOtuIfFineGrBerSfThrCoef value of 32 forms 3.2 x 10^-4 or 3.2E-04 in scientific notation. For a set request, the combination of the coefficient and exponent for an SD raise threshold must be a lower value than for the SF raise threshold; otherwise, the set request will fail with error code inconsistentValue. For a set request, the combination of the coefficient and exponent for a clear threshold must be a lower value than for the raise threshold; otherwise, the set request will fail with error code inconsistentValue. The row exists only if the associated tmnxOtuIfEntry is active." AUGMENTS { tmnxOtuIfEntry } ::= { tmnxOtuIfFineGrBerTable 1 } TmnxOtuIfFineGrBerEntry ::= SEQUENCE { tmnxOtuIfFineGrBerSupported TruthValue, tmnxOtuIfFineGrBerSfThresh Unsigned32, tmnxOtuIfFineGrBerSdThresh Unsigned32, tmnxOtuIfFineGrBerSfThrCoef Unsigned32, tmnxOtuIfFineGrBerSdThrCoef Unsigned32, tmnxOtuIfFineGrBerSfThreshClr Unsigned32, tmnxOtuIfFineGrBerSdThreshClr Unsigned32, tmnxOtuIfFineGrBerSfThrClrCoef Unsigned32, tmnxOtuIfFineGrBerSdThrClrCoef Unsigned32 } tmnxOtuIfFineGrBerSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSupported indicates whether or not fine granularity BER thresholds are supported on this OTU encapsulated physical interface." ::= { tmnxOtuIfFineGrBerEntry 1 } tmnxOtuIfFineGrBerSfThresh OBJECT-TYPE SYNTAX Unsigned32 (3..8) UNITS "error bits in 1/10e-n bits received" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSfThresh specifies the BER threshold used to determine when to raise fecSf alarms (notification tmnxOtuIfAlarmNotification). Bit error rate computed must reach/exceed the threshold value over a predefined period of time (window size) for the alarms to be raised: BER | Window Threshold | Length (ms) -------------------------- 3 | 8 4 | 8 5 | 8 6 | 13 7 | 100 8 | 333 9 | 1660" DEFVAL { 5 } ::= { tmnxOtuIfFineGrBerEntry 2 } tmnxOtuIfFineGrBerSdThresh OBJECT-TYPE SYNTAX Unsigned32 (3..9) UNITS "error bits in 1/10e-n bits received" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSdThresh specifies the BER threshold used to determine when to raise fecSd alarms (notification tmnxOtuIfAlarmNotification). Bit error rate computed must reach/exceed the threshold value over a predefined period of time (window size) for the alarms to be raised: BER | Window Threshold | Length (ms) -------------------------- 3 | 8 4 | 8 5 | 8 6 | 13 7 | 100 8 | 333 9 | 1660" DEFVAL { 7 } ::= { tmnxOtuIfFineGrBerEntry 3 } tmnxOtuIfFineGrBerSfThrCoef OBJECT-TYPE SYNTAX Unsigned32 (10..99) UNITS "tenths" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSfThrCoef specifies the factor used to fine tune the SF BER threshold (tmnxOtuIfFineGrBerSfThresh) for SF alarm raising." DEFVAL { 10 } ::= { tmnxOtuIfFineGrBerEntry 4 } tmnxOtuIfFineGrBerSdThrCoef OBJECT-TYPE SYNTAX Unsigned32 (10..99) UNITS "tenths" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSdThrCoef specifies the factor used to fine tune the SD BER threshold (tmnxOtuIfFineGrBerSdThresh) for SD alarm raising." DEFVAL { 10 } ::= { tmnxOtuIfFineGrBerEntry 5 } tmnxOtuIfFineGrBerSfThreshClr OBJECT-TYPE SYNTAX Unsigned32 (3..9) UNITS "error bits in 1/10e-n bits received" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSfThreshClr specifies the BER threshold used to determine when to clear fecSf alarms (notification tmnxOtuIfAlarmNotification)." DEFVAL { 6 } ::= { tmnxOtuIfFineGrBerEntry 6 } tmnxOtuIfFineGrBerSdThreshClr OBJECT-TYPE SYNTAX Unsigned32 (3..10) UNITS "error bits in 1/10e-n bits received" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSdThreshClr specifies the BER threshold used to determine when to clear fecSd alarms (notification tmnxOtuIfAlarmNotification)." DEFVAL { 8 } ::= { tmnxOtuIfFineGrBerEntry 7 } tmnxOtuIfFineGrBerSfThrClrCoef OBJECT-TYPE SYNTAX Unsigned32 (10..99) UNITS "tenths" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSfThrClrCoef specifies the factor used to fine tune the SF BER threshold (tmnxOtuIfFineGrBerSfThreshClr) for SF alarm clearing." DEFVAL { 10 } ::= { tmnxOtuIfFineGrBerEntry 8 } tmnxOtuIfFineGrBerSdThrClrCoef OBJECT-TYPE SYNTAX Unsigned32 (10..99) UNITS "tenths" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxOtuIfFineGrBerSdThrClrCoef specifies the factor used to fine tune the SD BER threshold (tmnxOtuIfFineGrBerSdThreshClr) for SD alarm clearing." DEFVAL { 10 } ::= { tmnxOtuIfFineGrBerEntry 9 } tmnxOtuStatistics OBJECT IDENTIFIER ::= { tmnxOtuObjs 2 } tmnxOtuIfRawStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxOtuIfRawStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfRawStatsTable consists of the raw statistics associated with the OTU interfaces contained in the tmnxOtuIfTable." ::= { tmnxOtuStatistics 1 } tmnxOtuIfRawStatsEntry OBJECT-TYPE SYNTAX TmnxOtuIfRawStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfRawStatsEntry stores the statistics for an individual OTU interface. tmnxOtuIfRawStatsEntry rows are created and destroyed by the system when rows are added or removed in the tmnxOtuIfTable." INDEX { ifIndex } ::= { tmnxOtuIfRawStatsTable 1 } TmnxOtuIfRawStatsEntry ::= SEQUENCE { tmnxOtuIfRawStatsFECCorrZeros Counter32, tmnxOtuIfRawStatsOFFECCorrZeros Counter32, tmnxOtuIfRawStatsHCFECCorrZeros Counter64, tmnxOtuIfRawStatsFECCorrOnes Counter32, tmnxOtuIfRawStatsOFFECCorrOnes Counter32, tmnxOtuIfRawStatsHCFECCorrOnes Counter64, tmnxOtuIfRawStatsFECUncorrSR Counter32, tmnxOtuIfRawStatsOFFECUncorrSR Counter32, tmnxOtuIfRawStatsHCFECUncorrSR Counter64, tmnxOtuIfRawStatsFECSES Counter32, tmnxOtuIfRawStatsSMBIP8 Counter32, tmnxOtuIfRawStatsOFSMBIP8 Counter32, tmnxOtuIfRawStatsHCSMBIP8 Counter64, tmnxOtuIfRawStatsSMBEI Counter32, tmnxOtuIfRawStatsOFSMBEI Counter32, tmnxOtuIfRawStatsHCSMBEI Counter64, tmnxOtuIfRawStatsSMSES Counter32, tmnxOtuIfRawStatsPMBIP8 Counter32, tmnxOtuIfRawStatsOFPMBIP8 Counter32, tmnxOtuIfRawStatsHCPMBIP8 Counter64, tmnxOtuIfRawStatsPMBEI Counter32, tmnxOtuIfRawStatsOFPMBEI Counter32, tmnxOtuIfRawStatsHCPMBEI Counter64, tmnxOtuIfRawStatsPMSES Counter32, tmnxOtuIfRawStatsFECES Counter32, tmnxOtuIfRawStatsFECUAS Counter32, tmnxOtuIfRawStatsSMES Counter32, tmnxOtuIfRawStatsSMUAS Counter32, tmnxOtuIfRawStatsPMES Counter32, tmnxOtuIfRawStatsPMUAS Counter32, tmnxOtuIfRawStatsNPJ Counter32, tmnxOtuIfRawStatsPPJ Counter32, tmnxOtuIfRawStatsElapsedSec Counter32 } tmnxOtuIfRawStatsFECCorrZeros OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsFECCorrZeros indicates the number of Forward Error Correction (FEC) corrected zeros." ::= { tmnxOtuIfRawStatsEntry 1 } tmnxOtuIfRawStatsOFFECCorrZeros OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFFECCorrZeros indicates the number of times the tmnxOtuIfRawStatsFECCorrZeros overflowed." ::= { tmnxOtuIfRawStatsEntry 2 } tmnxOtuIfRawStatsHCFECCorrZeros OBJECT-TYPE SYNTAX Counter64 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCFECCorrZeros indicates the High Capacity number of Forward Error Correction (FEC) corrected zeros." ::= { tmnxOtuIfRawStatsEntry 3 } tmnxOtuIfRawStatsFECCorrOnes OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsFECCorrOnes indicates the number of Forward Error Correction (FEC) corrected ones." ::= { tmnxOtuIfRawStatsEntry 4 } tmnxOtuIfRawStatsOFFECCorrOnes OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFFECCorrOnes indicates the number of times the tmnxOtuIfRawStatsFECCorrOnes overflowed." ::= { tmnxOtuIfRawStatsEntry 5 } tmnxOtuIfRawStatsHCFECCorrOnes OBJECT-TYPE SYNTAX Counter64 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCFECCorrOnes indicates the High Capacity number of Forward Error Correction (FEC) corrected ones." ::= { tmnxOtuIfRawStatsEntry 6 } tmnxOtuIfRawStatsFECUncorrSR OBJECT-TYPE SYNTAX Counter32 UNITS "Sub-Rows" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsFECUncorrSR indicates the number of Forward Error Correction (FEC) Uncorrectable Sub-Rows." ::= { tmnxOtuIfRawStatsEntry 7 } tmnxOtuIfRawStatsOFFECUncorrSR OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFFECUncorrSR indicates the number of times the tmnxOtuIfRawStatsFECUncorrSR overflowed." ::= { tmnxOtuIfRawStatsEntry 8 } tmnxOtuIfRawStatsHCFECUncorrSR OBJECT-TYPE SYNTAX Counter64 UNITS "Sub-Rows" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCFECUncorrSR indicates the High Capacity number of Forward Error Correction (FEC) Uncorrectable Sub-Rows." ::= { tmnxOtuIfRawStatsEntry 9 } tmnxOtuIfRawStatsFECSES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsFECSES indicates the number of Forward Error Correction (FEC) Severely Errors Seconds (SES)." ::= { tmnxOtuIfRawStatsEntry 10 } tmnxOtuIfRawStatsSMBIP8 OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsSMBIP8 indicates the number of Section Monitoring (SM) BIP8 errors." ::= { tmnxOtuIfRawStatsEntry 11 } tmnxOtuIfRawStatsOFSMBIP8 OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFSMBIP8 indicates the number of times the tmnxOtuIfRawStatsSMBIP8 overflowed." ::= { tmnxOtuIfRawStatsEntry 12 } tmnxOtuIfRawStatsHCSMBIP8 OBJECT-TYPE SYNTAX Counter64 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCSMBIP8 indicates the High Capacity number of Section Monitoring (SM) BIP8 errors." ::= { tmnxOtuIfRawStatsEntry 13 } tmnxOtuIfRawStatsSMBEI OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsSMBEI indicates the number of Section Monitoring (SM) Backward Error Indication (BEI) errors." ::= { tmnxOtuIfRawStatsEntry 14 } tmnxOtuIfRawStatsOFSMBEI OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFSMBEI indicates the number of times the tmnxOtuIfRawStatsSMBEI overflowed." ::= { tmnxOtuIfRawStatsEntry 15 } tmnxOtuIfRawStatsHCSMBEI OBJECT-TYPE SYNTAX Counter64 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCSMBEI indicates the High Capacity number of Section Monitoring (SM) Backward Error Indication (BEI) errors." ::= { tmnxOtuIfRawStatsEntry 16 } tmnxOtuIfRawStatsSMSES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsSMSES indicates the number of Section Monitoring (SM) Severely Errored Seconds (SES)." ::= { tmnxOtuIfRawStatsEntry 17 } tmnxOtuIfRawStatsPMBIP8 OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsPMBIP8 indicates the number of Path Monitoring (PM) BIP8 errors." ::= { tmnxOtuIfRawStatsEntry 18 } tmnxOtuIfRawStatsOFPMBIP8 OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFPMBIP8 indicates the number of times the tmnxOtuIfRawStatsPMBIP8 overflowed." ::= { tmnxOtuIfRawStatsEntry 19 } tmnxOtuIfRawStatsHCPMBIP8 OBJECT-TYPE SYNTAX Counter64 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCPMBIP8 indicates the High Capacity number of Path Monitoring (PM) BIP8 errors." ::= { tmnxOtuIfRawStatsEntry 20 } tmnxOtuIfRawStatsPMBEI OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsPMBEI indicates the number of Path Monitoring (PM) Backward Error Indication (BEI) errors." ::= { tmnxOtuIfRawStatsEntry 21 } tmnxOtuIfRawStatsOFPMBEI OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsOFPMBEI indicates the number of times tmnxOtuIfRawStatsPMBEI overflowed." ::= { tmnxOtuIfRawStatsEntry 22 } tmnxOtuIfRawStatsHCPMBEI OBJECT-TYPE SYNTAX Counter64 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsHCPMBEI indicates the High Capacity number of Path Monitoring (PM) Backward Error Indication (BEI) errors." ::= { tmnxOtuIfRawStatsEntry 23 } tmnxOtuIfRawStatsPMSES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsPMSES indicates the number of Path Monitoring (PM) Severely Errored Seconds (SES)." ::= { tmnxOtuIfRawStatsEntry 24 } tmnxOtuIfRawStatsFECES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsFECES indicates the number of Forward Error Correction (FEC) Errors Seconds (ES)." ::= { tmnxOtuIfRawStatsEntry 25 } tmnxOtuIfRawStatsFECUAS OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsFECUAS indicates the number of Forward Error Correction (FEC) Unavailable Seconds (UAS)." ::= { tmnxOtuIfRawStatsEntry 26 } tmnxOtuIfRawStatsSMES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsSMES indicates the number of Section Monitoring (SM) Errored Seconds (ES)." ::= { tmnxOtuIfRawStatsEntry 27 } tmnxOtuIfRawStatsSMUAS OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsSMUAS indicates the number of Section Monitoring (SM) Unavailable Seconds (UAS)." ::= { tmnxOtuIfRawStatsEntry 28 } tmnxOtuIfRawStatsPMES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsPMES indicates the number of Path Monitoring (PM) Errored Seconds (ES)." ::= { tmnxOtuIfRawStatsEntry 29 } tmnxOtuIfRawStatsPMUAS OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsPMUAS indicates the number of Path Monitoring (PM) Unavailable Seconds (UAS)." ::= { tmnxOtuIfRawStatsEntry 30 } tmnxOtuIfRawStatsNPJ OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsNPJ indicates the number of Negative Pointer justifications that occurred during the asynchronous demapping of the received payload inside the OTU frame." ::= { tmnxOtuIfRawStatsEntry 31 } tmnxOtuIfRawStatsPPJ OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsPPJ indicates the number of Positive Pointer justifications that occurred during the asynchronous demapping of the received payload inside the OTU frame." ::= { tmnxOtuIfRawStatsEntry 32 } tmnxOtuIfRawStatsElapsedSec OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfRawStatsElapsedSec indicates the number of Elapsed seconds since the last OTU raw statistics clearing." ::= { tmnxOtuIfRawStatsEntry 33 } tmnxOtuIfIntervalStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxOtuIfIntervalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfIntervalStatsTable consists of the statistic elements associated with the OTU interfaces contained in the tmnxOtuIfTable." ::= { tmnxOtuStatistics 2 } tmnxOtuIfIntervalStatsEntry OBJECT-TYPE SYNTAX TmnxOtuIfIntervalStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfIntervalStatsEntry stores the statistics for an individual OTU interface per row. tmnxOtuIfIntervalStatsEntry objects are created and destroyed by the system when rows are added or removed in the tmnxOtuIfTable." INDEX { ifIndex, tmnxOtuIfIntvlStatsIndex } ::= { tmnxOtuIfIntervalStatsTable 1 } TmnxOtuIfIntervalStatsEntry ::= SEQUENCE { tmnxOtuIfIntvlStatsIndex Unsigned32, tmnxOtuIfIntvlStatsIsValid TruthValue, tmnxOtuIfIntvlStatsFECCorrZeros Counter32, tmnxOtuIfIntvlStatsFECCorrOnes Counter32, tmnxOtuIfIntvlStatsFECUncorrSR Counter32, tmnxOtuIfIntvlStatsFECSES Counter32, tmnxOtuIfIntvlStatsSMBIP8 Counter32, tmnxOtuIfIntvlStatsSMBEI Counter32, tmnxOtuIfIntvlStatsSMSES Counter32, tmnxOtuIfIntvlStatsPMBIP8 Counter32, tmnxOtuIfIntvlStatsPMBEI Counter32, tmnxOtuIfIntvlStatsPMSES Counter32, tmnxOtuIfIntvlStatsFECES Counter32, tmnxOtuIfIntvlStatsFECUAS Counter32, tmnxOtuIfIntvlStatsSMES Counter32, tmnxOtuIfIntvlStatsSMUAS Counter32, tmnxOtuIfIntvlStatsPMES Counter32, tmnxOtuIfIntvlStatsPMUAS Counter32, tmnxOtuIfIntvlStatsNPJ Counter32, tmnxOtuIfIntvlStatsPPJ Counter32, tmnxOtuIfIntvlStatsElapsedSec Counter32 } tmnxOtuIfIntvlStatsIndex OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..96) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxOtuIfIntvlStatsIndex specifies the 15 minute statistic snapshot for the OTU interface. The interval index value of 0 specifies the current raw 15 minute statistic window. The value of one indicates the most recently completed 15 minute interval statistics snapshot. The interval identified by N is the interval immediately preceding the one identified by N-1." ::= { tmnxOtuIfIntervalStatsEntry 1 } tmnxOtuIfIntvlStatsIsValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsIsValid indicates whether or not the current statistics interval is valid. The raw interval (tmnxOtuIfIntvlStatsIndex set to 0) is always false." ::= { tmnxOtuIfIntervalStatsEntry 2 } tmnxOtuIfIntvlStatsFECCorrZeros OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsFECCorrZeros indicates the number of Forward Error Correction (FEC) corrected zeros." ::= { tmnxOtuIfIntervalStatsEntry 3 } tmnxOtuIfIntvlStatsFECCorrOnes OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsFECCorrOnes indicates the number of Forward Error Correction (FEC) corrected ones." ::= { tmnxOtuIfIntervalStatsEntry 4 } tmnxOtuIfIntvlStatsFECUncorrSR OBJECT-TYPE SYNTAX Counter32 UNITS "Sub-Rows" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsFECUncorrSR indicates the number of Forward Error Correction (FEC) Uncorrectable Sub-Rows." ::= { tmnxOtuIfIntervalStatsEntry 5 } tmnxOtuIfIntvlStatsFECSES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsFECSES indicates the number of Forward Error Correction (FEC) Severely Errors Seconds (SES)." ::= { tmnxOtuIfIntervalStatsEntry 6 } tmnxOtuIfIntvlStatsSMBIP8 OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsSMBIP8 indicates the number of Section Monitoring (SM) BIP8 errors." ::= { tmnxOtuIfIntervalStatsEntry 7 } tmnxOtuIfIntvlStatsSMBEI OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsSMBEI indicates the number of Section Monitoring (SM) Backward Error Indication (BEI) errors." ::= { tmnxOtuIfIntervalStatsEntry 8 } tmnxOtuIfIntvlStatsSMSES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsSMSES indicates the number of Section Monitoring (SM) Severely Errored Seconds (SES)." ::= { tmnxOtuIfIntervalStatsEntry 9 } tmnxOtuIfIntvlStatsPMBIP8 OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsPMBIP8 indicates the number of Path Monitoring (PM) BIP8 errors." ::= { tmnxOtuIfIntervalStatsEntry 10 } tmnxOtuIfIntvlStatsPMBEI OBJECT-TYPE SYNTAX Counter32 UNITS "bits" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsPMBEI indicates the number of Path Monitoring (PM) Backward Error Indication (BEI) errors." ::= { tmnxOtuIfIntervalStatsEntry 11 } tmnxOtuIfIntvlStatsPMSES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsPMSES indicates the number of Path Monitoring (PM) Severely Errored Seconds (SES)." ::= { tmnxOtuIfIntervalStatsEntry 12 } tmnxOtuIfIntvlStatsFECES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsFECES indicates the number of Forward Error Correction (FEC) Errors Seconds (ES)." ::= { tmnxOtuIfIntervalStatsEntry 13 } tmnxOtuIfIntvlStatsFECUAS OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsFECUAS indicates the number of Forward Error Correction (FEC) Unavailable Seconds (UAS)." ::= { tmnxOtuIfIntervalStatsEntry 14 } tmnxOtuIfIntvlStatsSMES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsSMES indicates the number of Section Monitoring (SM) Errored Seconds (ES)." ::= { tmnxOtuIfIntervalStatsEntry 15 } tmnxOtuIfIntvlStatsSMUAS OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsSMUAS indicates the number of Section Monitoring (SM) Unavailable Seconds (UAS)." ::= { tmnxOtuIfIntervalStatsEntry 16 } tmnxOtuIfIntvlStatsPMES OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsPMES indicates the number of Path Monitoring (PM) Errored Seconds (ES)." ::= { tmnxOtuIfIntervalStatsEntry 17 } tmnxOtuIfIntvlStatsPMUAS OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsPMUAS indicates the number of Path Monitoring (PM) Unavailable Seconds (UAS)." ::= { tmnxOtuIfIntervalStatsEntry 18 } tmnxOtuIfIntvlStatsNPJ OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsNPJ indicates the number of Negative Pointer justifications that occurred during the asynchronous demapping of the received payload inside the OTU frame." ::= { tmnxOtuIfIntervalStatsEntry 19 } tmnxOtuIfIntvlStatsPPJ OBJECT-TYPE SYNTAX Counter32 UNITS "count" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsPPJ indicates the number of Positive Pointer justifications that occurred during the asynchronous demapping of the received payload inside the OTU frame." ::= { tmnxOtuIfIntervalStatsEntry 20 } tmnxOtuIfIntvlStatsElapsedSec OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxOtuIfIntvlStatsElapsedSec indicates the number of Elapsed seconds in the current statistics interval." ::= { tmnxOtuIfIntervalStatsEntry 21 } tmnxOtuConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 62 } tmnxOtuCompliances OBJECT IDENTIFIER ::= { tmnxOtuConformance 1 } tmnxOtuCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for revision 1.0 of TIMETRA-OTU-MIB." MODULE MANDATORY-GROUPS { tmnxOtuIfBaseConfigGroup, tmnxOtuIfBaseConfigGroupV8v0, tmnxOtuIfSMGroup, tmnxOtuIfSMGroupV8v0, tmnxOtuIfPMGroupV8v0, tmnxOtuIfPSIGroupV8v0, tmnxOtuStatsGroup, tmnxOtuStatsGroupV8v0, tmnxOtuNotificationGroup } ::= { tmnxOtuCompliances 1 } tmnxOtuComplianceV8v0 MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for revision 8.0 of TIMETRA-OTU-MIB." MODULE MANDATORY-GROUPS { tmnxOtuIfBaseConfigGroupV8v0, tmnxOtuIfSMGroup, tmnxOtuIfSMGroupV8v0, tmnxOtuIfPMGroupV8v0, tmnxOtuIfPSIGroupV8v0, tmnxOtuStatsGroup, tmnxOtuStatsGroupV8v0, tmnxOtuNotificationGroup, tmnxOtuObsoleteV8v0Group } ::= { tmnxOtuCompliances 2 } tmnxOtuComplianceV11v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of OTU interface features in the TIMETRA-OTU-MIB for release 11.0." MODULE MANDATORY-GROUPS { tmnxOtuIfBaseConfigGroupV8v0, tmnxOtuIfSMGroup, tmnxOtuIfSMGroupV8v0, tmnxOtuIfPMGroupV8v0, tmnxOtuIfPSIGroupV8v0, tmnxOtuStatsGroup, tmnxOtuStatsGroupV8v0, tmnxOtuNotificationGroup, tmnxOtuObsoleteV8v0Group, tmnxOtuIfFineGrBerGroupV11v0 } ::= { tmnxOtuCompliances 3 } tmnxOtuGroups OBJECT IDENTIFIER ::= { tmnxOtuConformance 2 } tmnxOtuIfBaseConfigGroup OBJECT-GROUP OBJECTS { tmnxOtuIfTableLastChanged, tmnxOtuIfRowStatus, tmnxOtuIfTimeStamp, tmnxOtuIfFecMode, tmnxOtuIfSfSdMethod, tmnxOtuIfBerSfThreshold, tmnxOtuIfBerSdThreshold, tmnxOtuIfOtu2LanDataRate, tmnxOtuIfCfgAlarms, tmnxOtuIfAlarmState, tmnxOtuIfHoldTimeUp, tmnxOtuIfHoldTimeDown, tmnxOtuIfOtuOperDataRate } STATUS obsolete DESCRIPTION "The group of objects for management of OTU interfaces for the 7x50." ::= { tmnxOtuGroups 1 } tmnxOtuIfSMGroup OBJECT-GROUP OBJECTS { tmnxOtuIfSmTtiTxMode, tmnxOtuIfSmTtiTx, tmnxOtuIfSmTtiRx } STATUS current DESCRIPTION "The group of objects for management of Section Monitoring of OTU interfaces for the 7x50." ::= { tmnxOtuGroups 2 } tmnxOtuStatsGroup OBJECT-GROUP OBJECTS { tmnxOtuIfRawStatsFECCorrZeros, tmnxOtuIfRawStatsOFFECCorrZeros, tmnxOtuIfRawStatsHCFECCorrZeros, tmnxOtuIfRawStatsFECCorrOnes, tmnxOtuIfRawStatsOFFECCorrOnes, tmnxOtuIfRawStatsHCFECCorrOnes, tmnxOtuIfRawStatsFECUncorrSR, tmnxOtuIfRawStatsOFFECUncorrSR, tmnxOtuIfRawStatsHCFECUncorrSR, tmnxOtuIfRawStatsFECSES, tmnxOtuIfRawStatsSMBIP8, tmnxOtuIfRawStatsOFSMBIP8, tmnxOtuIfRawStatsHCSMBIP8, tmnxOtuIfRawStatsSMBEI, tmnxOtuIfRawStatsOFSMBEI, tmnxOtuIfRawStatsHCSMBEI, tmnxOtuIfRawStatsSMSES, tmnxOtuIfRawStatsPMBIP8, tmnxOtuIfRawStatsOFPMBIP8, tmnxOtuIfRawStatsHCPMBIP8, tmnxOtuIfRawStatsPMBEI, tmnxOtuIfRawStatsOFPMBEI, tmnxOtuIfRawStatsHCPMBEI, tmnxOtuIfRawStatsPMSES, tmnxOtuIfIntvlStatsIsValid, tmnxOtuIfIntvlStatsFECCorrZeros, tmnxOtuIfIntvlStatsFECCorrOnes, tmnxOtuIfIntvlStatsFECUncorrSR, tmnxOtuIfIntvlStatsFECSES, tmnxOtuIfIntvlStatsSMBIP8, tmnxOtuIfIntvlStatsSMBEI, tmnxOtuIfIntvlStatsSMSES, tmnxOtuIfIntvlStatsPMBIP8, tmnxOtuIfIntvlStatsPMBEI, tmnxOtuIfIntvlStatsPMSES } STATUS current DESCRIPTION "The group of objects for monitoring statistics of OTU interfaces for the 7x50." ::= { tmnxOtuGroups 3 } tmnxOtuNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxOtuIfAlarmNotification } STATUS current DESCRIPTION "The group of notifications supporting management of OTU interfaces for the 7x50." ::= { tmnxOtuGroups 4 } tmnxOtuGroupsV7v0 OBJECT IDENTIFIER ::= { tmnxOtuGroups 5 } tmnxOtuGroupsV8v0 OBJECT IDENTIFIER ::= { tmnxOtuGroups 6 } tmnxOtuIfBaseConfigGroupV8v0 OBJECT-GROUP OBJECTS { tmnxOtuIfTableLastChanged, tmnxOtuIfRowStatus, tmnxOtuIfTimeStamp, tmnxOtuIfFecMode, tmnxOtuIfSfSdMethod, tmnxOtuIfBerSfThreshold, tmnxOtuIfBerSdThreshold, tmnxOtuIfOtu2LanDataRate, tmnxOtuIfCfgAlarms, tmnxOtuIfAlarmState, tmnxOtuIfOtuOperDataRate, tmnxOtuIfAsyncMappingEnable } STATUS current DESCRIPTION "The group of additional objects for management of OTU interfaces for the 7x50 in Release 8.0." ::= { tmnxOtuGroupsV8v0 1 } tmnxOtuIfSMGroupV8v0 OBJECT-GROUP OBJECTS { tmnxOtuIfSmTtiTxMode, tmnxOtuIfSmTtiTx, tmnxOtuIfSmTtiRx, tmnxOtuIfSmTtiExpMode, tmnxOtuIfSmTtiExpCopyRx, tmnxOtuIfSmTtiExp, tmnxOtuIfSmTimReaction } STATUS current DESCRIPTION "The group of additional objects for management of Section Monitoring of OTU interfaces for the 7x50 in Release 8.0." ::= { tmnxOtuGroupsV8v0 2 } tmnxOtuStatsGroupV8v0 OBJECT-GROUP OBJECTS { tmnxOtuIfRawStatsFECES, tmnxOtuIfRawStatsFECUAS, tmnxOtuIfRawStatsSMES, tmnxOtuIfRawStatsSMUAS, tmnxOtuIfRawStatsPMES, tmnxOtuIfRawStatsPMUAS, tmnxOtuIfRawStatsNPJ, tmnxOtuIfRawStatsPPJ, tmnxOtuIfRawStatsElapsedSec, tmnxOtuIfIntvlStatsFECES, tmnxOtuIfIntvlStatsFECUAS, tmnxOtuIfIntvlStatsSMES, tmnxOtuIfIntvlStatsSMUAS, tmnxOtuIfIntvlStatsPMES, tmnxOtuIfIntvlStatsPMUAS, tmnxOtuIfIntvlStatsPPJ, tmnxOtuIfIntvlStatsNPJ, tmnxOtuIfIntvlStatsElapsedSec } STATUS current DESCRIPTION "The group of additional objects for monitoring statistics of OTU interfaces for the 7x50 in Release 8.0." ::= { tmnxOtuGroupsV8v0 3 } tmnxOtuIfPMGroupV8v0 OBJECT-GROUP OBJECTS { tmnxOtuIfPmTtiTxMode, tmnxOtuIfPmTtiTx, tmnxOtuIfPmTtiRx, tmnxOtuIfPmTtiExpMode, tmnxOtuIfPmTtiExpCopyRx, tmnxOtuIfPmTtiExp, tmnxOtuIfPmTimReaction } STATUS current DESCRIPTION "The group of objects for management of Path Monitoring of OTU interfaces for the 7x50 in Release 8.0." ::= { tmnxOtuGroupsV8v0 4 } tmnxOtuIfPSIGroupV8v0 OBJECT-GROUP OBJECTS { tmnxOtuIfPsiTtiTxMode, tmnxOtuIfPsiTtiTx, tmnxOtuIfPsiTtiRx, tmnxOtuIfPsiTtiExpMode, tmnxOtuIfPsiTtiExpCopyRx, tmnxOtuIfPsiTtiExp, tmnxOtuIfPsiPayloadTypeTx, tmnxOtuIfPsiPayloadTypeRx, tmnxOtuIfPsiPayloadTypeExp, tmnxOtuIfPsiTimReaction, tmnxOtuIfPsiPlmReaction } STATUS current DESCRIPTION "The group of objects for management of Payload Structure Identifier of OTU interfaces for the 7x50 in Release 8.0." ::= { tmnxOtuGroupsV8v0 5 } tmnxOtuObsoleteV8v0Group OBJECT-GROUP OBJECTS { tmnxOtuIfHoldTimeUp, tmnxOtuIfHoldTimeDown } STATUS current DESCRIPTION "The group of objects that were made obsolete for the 7x50 in Release 8.0." ::= { tmnxOtuGroupsV8v0 6 } tmnxOtuGroupsV11v0 OBJECT IDENTIFIER ::= { tmnxOtuGroups 7 } tmnxOtuIfFineGrBerGroupV11v0 OBJECT-GROUP OBJECTS { tmnxOtuIfFineGrBerSupported, tmnxOtuIfFineGrBerSfThresh, tmnxOtuIfFineGrBerSdThresh, tmnxOtuIfFineGrBerSfThrCoef, tmnxOtuIfFineGrBerSdThrCoef, tmnxOtuIfFineGrBerSfThreshClr, tmnxOtuIfFineGrBerSdThreshClr, tmnxOtuIfFineGrBerSfThrClrCoef, tmnxOtuIfFineGrBerSdThrClrCoef } STATUS current DESCRIPTION "The group of objects introduced in Release 11.0 for OTU interface fine granularity pre-FEC BER SD and SF threshold information on Nokia SROS systems." ::= { tmnxOtuGroupsV11v0 1 } tmnxOtuGroupsV13v0 OBJECT IDENTIFIER ::= { tmnxOtuGroups 8 } tmnxOtuGroupsV19v0 OBJECT IDENTIFIER ::= { tmnxOtuGroups 9 } tmnxOtuObsoleteGroupV19v0 OBJECT-GROUP OBJECTS { tmnxOtuIfPsiTtiTxMode, tmnxOtuIfPsiTtiTx, tmnxOtuIfPsiTtiRx, tmnxOtuIfPsiTtiExpMode, tmnxOtuIfPsiTtiExpCopyRx, tmnxOtuIfPsiTtiExp, tmnxOtuIfPsiTimReaction } STATUS current DESCRIPTION "The group of objects supporting OTU capabilities that were obsoleted in Release 19.0 on Nokia SROS systems." ::= { tmnxOtuGroupsV19v0 1 } tmnxOtuNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 62 } tmnxOtuNotifications OBJECT IDENTIFIER ::= { tmnxOtuNotifyPrefix 0 } tmnxOtuIfAlarmNotification NOTIFICATION-TYPE OBJECTS { tmnxOtuIfAlarmState } STATUS current DESCRIPTION "The tmnxOtuIfAlarmNotification notification indicates that an OTU interface has experienced either a raising or clearing of an alarm in the Forward Error Correction (FEC), Section Monitoring (SM), Path Monitoring (PM) or Payload Monitoring (PSI) fields of the OTU frame." ::= { tmnxOtuNotifications 1 } END