-- TIMETRA Multicast Source Discovery Protocol Management Information Base TIMETRA-MSDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, Gauge32, Counter32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF RowStatus, TruthValue, TimeInterval, TimeStamp FROM SNMPv2-TC timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM TIMETRA-GLOBAL-MIB TPolicyStatementNameOrEmpty,TmnxAdminState, TNamedItem, TNamedItemOrEmpty FROM TIMETRA-TC-MIB InetAddressType, InetAddress, InetAddressPrefixLength FROM INET-ADDRESS-MIB; timetraMsdpMIBModule MODULE-IDENTITY LAST-UPDATED "201108010000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com" DESCRIPTION "This is the SNMP MIB module to manage and provision MSDP protocol on Alcatel SROS equipment. The Multicast Source Discovery Protocol (MSDP) is used to connect multicast routing domains. It typically runs on the same router as the Protocol Independent Multicast (PIM) sparse-mode rendezvous point (RP). Each MSDP router establishes adjacencies with internal and external MSDP peers similar to the Border Gateway Protocol (BGP). These peer routers inform each other about active sources within the domain. When they detect active sources, the routers can send PIM sparse-mode explicit join messages to the active source. Copyright 2006-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "201108010000Z" DESCRIPTION "Rev 10.0 1 Aug 2011 00:00 10.0 release of the TIMETRA-MSDP-MIB." REVISION "0902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-MSDP-MIB." REVISION "200608010000Z" DESCRIPTION "Rev 0.1 1 Aug 2006 00:00 Initial version of the TIMETRA-MSDP-MIB." ::= { timetraSRMIBModules 43 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Alcatel 7xx0 SR series multicast source distribution protocol objects -- tmnxMsdpObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 43 } tmnxMsdpGlobals OBJECT IDENTIFIER ::= { tmnxMsdpObjects 1 } tmnxMsdpConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 43 } tmnxMsdpCompliances OBJECT IDENTIFIER ::= { tmnxMsdpConformance 1 } tmnxMsdpGroups OBJECT IDENTIFIER ::= { tmnxMsdpConformance 2 } tmnxMsdpNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 43 } tmnxMsdpNotifications OBJECT IDENTIFIER ::= { tmnxMsdpNotifyPrefix 0 } -- ------------------------------------------------ -- mib objects -- ------------------------------------------------ tmnxMsdpMaxActiveSources OBJECT-TYPE SYNTAX Integer32 (-1|0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted." DEFVAL { -1 } ::= { tmnxMsdpGlobals 1 } tmnxMsdpMsgRcvRate OBJECT-TYPE SYNTAX Unsigned32 (0|10..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpGlobals 2 } tmnxMsdpMsgRcvRateTime OBJECT-TYPE SYNTAX Unsigned32 (0|1..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpGlobals 3 } tmnxMsdpMsgRcvRateThd OBJECT-TYPE SYNTAX Gauge32 (0|1..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpGlobals 4 } tmnxMsdpDataEncapsulation OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpDataEncapsulation is used to configure a rendezvous point (RP) using MSDP to encapsulate multicast data received in MSDP register messages inside forwarded MSDP source-active messages. By default data encapsulation is enabled." DEFVAL { true } ::= { tmnxMsdpGlobals 5 } tmnxMsdpAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpAdminState specifies the desired administrative state for MSDP. When MSDP is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer or peer group is also disabled. By default, state of MSDP is 'inService'." DEFVAL { inService } ::= { tmnxMsdpGlobals 6 } tmnxMsdpExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 7 } tmnxMsdpExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 8 } tmnxMsdpExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 9 } tmnxMsdpExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 10 } tmnxMsdpExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 11 } tmnxMsdpImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 12 } tmnxMsdpImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 13 } tmnxMsdpImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 14 } tmnxMsdpImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 15 } tmnxMsdpImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 16 } tmnxMsdpLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpLocalAddressType indicates the type of tmnxMsdpLocalAddress." DEFVAL { unknown } ::= { tmnxMsdpGlobals 17 } tmnxMsdpLocalAddress OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpGlobals 18 } tmnxMsdpStatusPeerCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpStatusPeerCount indicates the number of configured peers." ::= { tmnxMsdpGlobals 19 } tmnxMsdpStatusPeersEstablished OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpStatusPeersEstablished indicates the number of peers in established state" ::= { tmnxMsdpGlobals 20 } tmnxMsdpStatusSACount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpStatusSACount indicates the number of source active configured in cache. " ::= { tmnxMsdpGlobals 21 } tmnxMsdpStatusLastTimeUp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpStatusLastTimeUp indicates the last time the protocol was enabled." ::= { tmnxMsdpGlobals 22 } tmnxMsdpStatusActSrcLimExceeded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpStatusActSrcLimExceeded indicates the number of times the global active source limit has been exceeded" ::= { tmnxMsdpGlobals 23 } tmnxMsdpRpfLookupSequence OBJECT-TYPE SYNTAX INTEGER { mucastRouteTable (0), ucastRouteTable (1), both (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxMsdpRpfLookupSequence is used to configure the sequence of route tables that MSDP uses for finding a Reverse Path Forwarding(RPF) interface for a particular multicast route. 'mucastRouteTable' is the unicast route table to be used only by multicast protocols(MSDP) which will contain routes submitted by multi-protocol BGP, ISIS and OSPF. 'ucastRouteTable' is the regular unicast route table which will contain routes submitted by all the unicast routing protocols. By default, only the 'ucastRouteTable' is looked up by MSDP for calculating RPF interface towards the source/rendezvous point. However the operator can specify the following: a) Use unicast route table only b) Use multicast unicast route table only or c) Use both the route tables. In case of (c), MSDP will always lookup first in the 'mucastRouteTable' and if there is a route, it will use it. If MSDP does not find a route in the first lookup, it will try to find it in the 'ucastRouteTable'." DEFVAL { ucastRouteTable } ::= { tmnxMsdpGlobals 24 } tmnxMsdpSACacheLifetime OBJECT-TYPE SYNTAX Unsigned32 (90..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxMsdpSACacheLifetime specifies lifetime given to SA cache entries in seconds when created or refreshed. This object does not measure time per se; instead, it is the delta from the time at which an SA message is received at which it should be expired if not refreshed. (i.e., it is the value of tmnxMsdpSrcActiveExpiryTime immediately after receiving an SA message applying to that row.)" DEFVAL { 90 } ::= { tmnxMsdpGlobals 25 } tmnxMsdpSARejectExportPolicy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSARejectExportPolicy indicates number of SA messages that were not sent due to export policy." ::= { tmnxMsdpGlobals 26 } tmnxMsdpSARejectImportPolicy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSARejectImportPolicy indicates number of SA messages that were rejected due to import policy." ::= { tmnxMsdpGlobals 27 } -- -- The MSDP Peer table -- tmnxMsdpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxMsdpPeerTable table provides information on the properties of a MSDP peer." ::= { tmnxMsdpObjects 2 } tmnxMsdpPeerEntry OBJECT-TYPE SYNTAX TmnxMsdpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tmnxMsdpPeerEntry represents a row entry in tmnxMsdpPeerTable for a MSDP peer. Entries can be created and deleted via SNMP SET operations through tmnxMsdpPeerRowStatus. " INDEX { tmnxMsdpPeerAddressType, tmnxMsdpPeerAddress } ::= { tmnxMsdpPeerTable 1 } TmnxMsdpPeerEntry ::= SEQUENCE { tmnxMsdpPeerAddressType InetAddressType, tmnxMsdpPeerAddress InetAddress, tmnxMsdpPeerRowStatus RowStatus, tmnxMsdpPeerMaxActiveSources Integer32, tmnxMsdpPeerMsgRcvRate Unsigned32, tmnxMsdpPeerMsgRcvRateTime Unsigned32, tmnxMsdpPeerMsgRcvRateThd Gauge32, tmnxMsdpPeerAuthKey OCTET STRING, tmnxMsdpPeerAuthKeyEncrypted TruthValue, tmnxMsdpPeerDefaultPeer TruthValue, tmnxMsdpPeerAdminState TmnxAdminState, tmnxMsdpPeerExportPolicy1 TPolicyStatementNameOrEmpty, tmnxMsdpPeerExportPolicy2 TPolicyStatementNameOrEmpty, tmnxMsdpPeerExportPolicy3 TPolicyStatementNameOrEmpty, tmnxMsdpPeerExportPolicy4 TPolicyStatementNameOrEmpty, tmnxMsdpPeerExportPolicy5 TPolicyStatementNameOrEmpty, tmnxMsdpPeerImportPolicy1 TPolicyStatementNameOrEmpty, tmnxMsdpPeerImportPolicy2 TPolicyStatementNameOrEmpty, tmnxMsdpPeerImportPolicy3 TPolicyStatementNameOrEmpty, tmnxMsdpPeerImportPolicy4 TPolicyStatementNameOrEmpty, tmnxMsdpPeerImportPolicy5 TPolicyStatementNameOrEmpty, tmnxMsdpPeerLocalAddressType InetAddressType, tmnxMsdpPeerLocalAddress InetAddress, tmnxMsdpPeerState INTEGER, tmnxMsdpPeerLastUpOrDown TimeStamp, tmnxMsdpPeerConRetry Counter32, tmnxMsdpPeerStateTimer Unsigned32, tmnxMsdpPeerTimeout Unsigned32, tmnxMsdpPeerSAAccepted Gauge32, tmnxMsdpPeerSARecvd Gauge32, tmnxMsdpPeerLastASLimit TimeStamp } tmnxMsdpPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpPeerAddressType indicates the type of tmnxMsdpPeerAddress." ::= { tmnxMsdpPeerEntry 1 } tmnxMsdpPeerAddress OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpPeerAddress indicates the address of the MSDP peer." ::= { tmnxMsdpPeerEntry 2 } tmnxMsdpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxMsdpPeerRowStatus is the object used for creating and deleting row entries in this table." ::= { tmnxMsdpPeerEntry 3 } tmnxMsdpPeerMaxActiveSources OBJECT-TYPE SYNTAX Integer32 (-1|0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted." DEFVAL { -1 } ::= { tmnxMsdpPeerEntry 4 } tmnxMsdpPeerMsgRcvRate OBJECT-TYPE SYNTAX Unsigned32 (0|10..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpPeerMsgRcvRateTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerEntry 5 } tmnxMsdpPeerMsgRcvRateTime OBJECT-TYPE SYNTAX Unsigned32 (0|1..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerMsgRcvRateTime specifies the time in seconds that together with tmnxMsdpPeerMsgRcvRate defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerEntry 6 } tmnxMsdpPeerMsgRcvRateThd OBJECT-TYPE SYNTAX Gauge32 (0|1..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpPeerMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerEntry 7 } tmnxMsdpPeerAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerAuthKey specifies the authentication key to be used for a specific MSDP peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default, all MSDP messages are accepted and the MD5 signature option authentication key is disabled" DEFVAL { ''H } ::= { tmnxMsdpPeerEntry 8 } tmnxMsdpPeerAuthKeyEncrypted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of tmnxMsdpPeerAuthKeyEncrypted is 'true', the password specified by tmnxMsdpPeerAuthKey is in the encrypted form. When the value of tmnxMsdpPeerAuthKeyEncrypted is 'false', the password specified by tmnxMsdpPeerAuthKey is in plain text. tmnxMsdpPeerAuthKey and tmnxMsdpPeerAuthKeyEncrypted, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error." DEFVAL { true } ::= { tmnxMsdpPeerEntry 9 } tmnxMsdpPeerDefaultPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerDefaultPeer is used to configure a peer as the default Msdp peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check." DEFVAL { false } ::= { tmnxMsdpPeerEntry 10 } tmnxMsdpPeerAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerAdminState specifies the desired administrative state for a MSDP peer. When a MSDP peer is 'outOfService' the operational state of MSDP as well as the operational state of other entities under it, like peer group is also disabled. By default, the state of a MSDP peer is 'inService'." DEFVAL { inService } ::= { tmnxMsdpPeerEntry 11 } tmnxMsdpPeerExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 12 } tmnxMsdpPeerExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 13 } tmnxMsdpPeerExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 14 } tmnxMsdpPeerExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 15 } tmnxMsdpPeerExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 16 } tmnxMsdpPeerImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 17 } tmnxMsdpPeerImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 18 } tmnxMsdpPeerImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 19 } tmnxMsdpPeerImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 20 } tmnxMsdpPeerImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 21 } tmnxMsdpPeerLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerLocalAddressType is used to configure the type of tmnxMsdpPeerLocalAddress." DEFVAL { unknown } ::= { tmnxMsdpPeerEntry 22 } tmnxMsdpPeerLocalAddress OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerEntry 23 } tmnxMsdpPeerState OBJECT-TYPE SYNTAX INTEGER { listen (0), established (1), inactive (2), disabled (3), connecting (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerState indicates the status of the connection." ::= { tmnxMsdpPeerEntry 24 } tmnxMsdpPeerLastUpOrDown OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerLastUpOrDown indicates the time at which the most recent peer-state change occurred." ::= { tmnxMsdpPeerEntry 25 } tmnxMsdpPeerConRetry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerConRetry indicates number of peer connection retry attempts." ::= { tmnxMsdpPeerEntry 26 } tmnxMsdpPeerStateTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer." ::= { tmnxMsdpPeerEntry 27 } tmnxMsdpPeerTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable." ::= { tmnxMsdpPeerEntry 28 } tmnxMsdpPeerSAAccepted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer." ::= { tmnxMsdpPeerEntry 29 } tmnxMsdpPeerSARecvd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerSARecvd indicates the number of entries in the source-active cache received by the peer." ::= { tmnxMsdpPeerEntry 30 } tmnxMsdpPeerLastASLimit OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerLastASLimit indicates the time that the last active source limit was triggered." ::= { tmnxMsdpPeerEntry 31 } tmnxMsdpPeerGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpPeerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxMsdpPeerGroupTable provides a listing of all MSDP Peer Groups." ::= { tmnxMsdpObjects 3 } tmnxMsdpPeerGroupEntry OBJECT-TYPE SYNTAX TmnxMsdpPeerGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tmnxMsdpPeerGroupEntry represents a MSDP Peer Group. Entries can be created and deleted via SNMP SET operations." INDEX { tmnxMsdpPeerGroupName } ::= { tmnxMsdpPeerGroupTable 1 } TmnxMsdpPeerGroupEntry ::= SEQUENCE { tmnxMsdpPeerGroupName TNamedItem, tmnxMsdpPeerGroupRowStatus RowStatus, tmnxMsdpPeerGroupMsgRcvRate Unsigned32, tmnxMsdpPeerGroupMsgRcvRateTime Unsigned32, tmnxMsdpPeerGroupMsgRcvRateThd Gauge32, tmnxMsdpPeerGroupAdminState TmnxAdminState, tmnxMsdpPeerGroupExportPolicy1 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupExportPolicy2 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupExportPolicy3 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupExportPolicy4 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupExportPolicy5 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupImportPolicy1 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupImportPolicy2 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupImportPolicy3 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupImportPolicy4 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupImportPolicy5 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGroupLocalAddrType InetAddressType, tmnxMsdpPeerGroupLocalAddress InetAddress, tmnxMsdpPeerGroupMode INTEGER, tmnxMsdpPeerGroupMaxActSources Integer32, tmnxMsdpPeerGroupActMsgsExMax Counter32, tmnxMsdpPeerGrpSARejExpPolicy Counter32, tmnxMsdpPeerGrpSARejImpPolicy Counter32 } tmnxMsdpPeerGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupName indicates the peer group name." ::= { tmnxMsdpPeerGroupEntry 1 } tmnxMsdpPeerGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxMsdpPeerGroupRowStatus is the object used for creating and deleting row entries in this table." ::= { tmnxMsdpPeerGroupEntry 2 } tmnxMsdpPeerGroupMsgRcvRate OBJECT-TYPE SYNTAX Unsigned32 (0|10..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupMsgRcvRate specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpMsgRcvRateTime seconds By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerGroupEntry 3 } tmnxMsdpPeerGroupMsgRcvRateTime OBJECT-TYPE SYNTAX Unsigned32 (0|1..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupMsgRcvRateTime specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of source active messages that can be stored on the system. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGroupMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerGroupEntry 4 } tmnxMsdpPeerGroupMsgRcvRateThd OBJECT-TYPE SYNTAX Gauge32 (0|1..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupMsgRcvRateThd specifies the number of MSDP messages that can be processed before tmnxMsdpPeerGroupMsgRcvRate is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGroupMsgRcvRateThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGroupMsgRcvRateTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerGroupEntry 5 } tmnxMsdpPeerGroupAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupAdminState specifies the desired administrative state for a MSDP peer group. When tmnxMsdpPeerGroupAdminState is 'outOfService' the operational state of the MSDP peer group as well as the operational state of other entities under it, like other peers is also disabled. By default, the state of a MSDP peer group is 'inService'." DEFVAL { inService } ::= { tmnxMsdpPeerGroupEntry 6 } tmnxMsdpPeerGroupExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupExportPolicy1 specifies the export policy number 1 at peer group level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 7 } tmnxMsdpPeerGroupExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupExportPolicy2 specifies the export policy number 2 at peer group protocol level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 8 } tmnxMsdpPeerGroupExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupExportPolicy3 specifies the export policy number 3 at peer group protocol level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 9 } tmnxMsdpPeerGroupExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupExportPolicy4 specifies the export policy number 4 at peer group protocol level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 10} tmnxMsdpPeerGroupExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupExportPolicy5 specifies the export policy number 5 at peer group protocol level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 11 } tmnxMsdpPeerGroupImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupImportPolicy1 specifies the import policy number 1 at peer group level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 12 } tmnxMsdpPeerGroupImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupImportPolicy2 specifies the import policy number 2 at peer group level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 13 } tmnxMsdpPeerGroupImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupImportPolicy3 specifies the import policy number 3 at peer group level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 14 } tmnxMsdpPeerGroupImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupImportPolicy4 specifies the import policy number 4 at peer group level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 15 } tmnxMsdpPeerGroupImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupImportPolicy5 specifies the import policy number 5 at peer group level." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 16 } tmnxMsdpPeerGroupLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupLocalAddrType is used to configure the type of tmnxMsdpPeerGroupLocalAddress." DEFVAL { unknown } ::= { tmnxMsdpPeerGroupEntry 17 } tmnxMsdpPeerGroupLocalAddress OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGroupEntry 18 } tmnxMsdpPeerGroupMode OBJECT-TYPE SYNTAX INTEGER{ standard (1), mesh-group (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupMode is used to configure groups of peers in a full mesh topology. MSDP peers can be grouped in a full-mesh topology that prevents excessive flooding of source-active messages to neighboring peers. When operating in meshed mode, source-active messages received from a mesh group member are always accepted but are not flooded to other members of the same mesh group. As a result, these source-active messages are only flooded to non-mesh group peers or members of other mesh groups. By default 'standard' (non-meshed) mode is used." DEFVAL { standard } ::= { tmnxMsdpPeerGroupEntry 19} tmnxMsdpPeerGroupMaxActSources OBJECT-TYPE SYNTAX Integer32 (-1|0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupMaxActSources specifies the maximum number of source active messages that will be accepted by this MSDP peer group. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted." DEFVAL { -1 } ::= { tmnxMsdpPeerGroupEntry 20 } tmnxMsdpPeerGroupActMsgsExMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGroupActMsgsExMax indicates the number of source active messages received from this group that exceeded the established maximum number." ::= { tmnxMsdpPeerGroupEntry 21 } tmnxMsdpPeerGrpSARejExpPolicy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpSARejExpPolicy indicates the number of source active messages received from this group that were were not sent due to export policy." ::= { tmnxMsdpPeerGroupEntry 22 } tmnxMsdpPeerGrpSARejImpPolicy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpSARejImpPolicy indicates the number of source active messages received from this group that were rejected due to import policy." ::= { tmnxMsdpPeerGroupEntry 23 } tmnxMsdpPeerGrpPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpPeerGrpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxMsdpPeerGrpPeerTable table provides a listing of all peers under MSDP Peer Groups." ::= { tmnxMsdpObjects 4 } tmnxMsdpPeerGrpPeerEntry OBJECT-TYPE SYNTAX TmnxMsdpPeerGrpPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing a peer in an MSDP Peer Group. Entries can be created and deleted via SNMP SET operations." INDEX { tmnxMsdpPeerGroupName, tmnxMsdpPeerGrpPeerAddressType, tmnxMsdpPeerGrpPeerAddress } ::= { tmnxMsdpPeerGrpPeerTable 1 } TmnxMsdpPeerGrpPeerEntry ::= SEQUENCE { tmnxMsdpPeerGrpPeerAddressType InetAddressType, tmnxMsdpPeerGrpPeerAddress InetAddress, tmnxMsdpPeerGrpPeerRowStatus RowStatus, tmnxMsdpPeerGrpPeerMaxActSrcs Integer32, tmnxMsdpPeerGrpPeerMsgRcvRt Unsigned32, tmnxMsdpPeerGrpPeerMsgRcvRtTime Unsigned32, tmnxMsdpPeerGrpPeerMsgRcvRtThd Gauge32, tmnxMsdpPeerGrpPeerAuthKey OCTET STRING, tmnxMsdpPeerGrpPeerAKeyEncrypt TruthValue, tmnxMsdpPeerGrpPeerDefaultPeer TruthValue, tmnxMsdpPeerGrpPeerAdminState TmnxAdminState, tmnxMsdpPeerGrpPeerExportPolicy1 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerExportPolicy2 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerExportPolicy3 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerExportPolicy4 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerExportPolicy5 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerImportPolicy1 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerImportPolicy2 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerImportPolicy3 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerImportPolicy4 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerImportPolicy5 TPolicyStatementNameOrEmpty, tmnxMsdpPeerGrpPeerLocAddrType InetAddressType, tmnxMsdpPeerGrpPeerLocalAddress InetAddress, tmnxMsdpPeerGrpPeerState INTEGER, tmnxMsdpPeerGrpPeerLastUpOrDown TimeStamp, tmnxMsdpPeerGrpPeerConRetry Counter32, tmnxMsdpPeerGrpPeerStateTimer Unsigned32, tmnxMsdpPeerGrpPeerTimeout Unsigned32, tmnxMsdpPeerGrpPeerSAAccepted Gauge32, tmnxMsdpPeerGrpPeerSARecvd Gauge32, tmnxMsdpPeerGrpPeerLastASLimit TimeStamp } tmnxMsdpPeerGrpPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerAddressType indicates the type of address of the MSDP peer." ::= { tmnxMsdpPeerGrpPeerEntry 1 } tmnxMsdpPeerGrpPeerAddress OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerAddress indicates the address of the MSDP peer." ::= { tmnxMsdpPeerGrpPeerEntry 2 } tmnxMsdpPeerGrpPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxMsdpPeerGrpPeerRowStatus is the object used for creating and deleting row entries in this table." ::= { tmnxMsdpPeerGrpPeerEntry 3 } tmnxMsdpPeerGrpPeerMaxActSrcs OBJECT-TYPE SYNTAX Integer32 (-1|0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerMaxActSrcs specifies the maximum number of source active messages that will be accepted by MSDP peer group peer. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted." DEFVAL { -1 } ::= { tmnxMsdpPeerGrpPeerEntry 4 } tmnxMsdpPeerGrpPeerMsgRcvRt OBJECT-TYPE SYNTAX Unsigned32 (0|10..10000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerMsgRcvRt specifies the number of MSDP messages (including source active messages) that are read from the TCP session per tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerGrpPeerEntry 5 } tmnxMsdpPeerGrpPeerMsgRcvRtTime OBJECT-TYPE SYNTAX Unsigned32 (0|1..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerMsgRcvRtTime specifies the time in seconds that together with tmnxMsdpPeerGrpPeerMsgRcvRt defines the number of MSDP messages (including source active messages) that are read from the TCP session within the configured number of seconds. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerGrpPeerEntry 6 } tmnxMsdpPeerGrpPeerMsgRcvRtThd OBJECT-TYPE SYNTAX Gauge32 (0|1..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerMsgRcvRtThd specifies the number of MSDP messages that can be processed before tmnxMsdpPeerGrpPeerMsgRcvRt is set. This is useful during system startup and initialization. By default, no MSDP messages are read from the TCP session and this is specified by the value 0. Once the number of MSDP packets defined in tmnxMsdpPeerGrpPeerMsgRcvRtThd have been processed the rate of all other MSDP packets is rate limited by no longer accepting messages from the TCP session until tmnxMsdpPeerGrpPeerMsgRcvRtTime seconds have elapsed." DEFVAL { 0 } ::= { tmnxMsdpPeerGrpPeerEntry 7 } tmnxMsdpPeerGrpPeerAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerAuthKey specifies the authentication key to be used for a specific MSDP peer group peering session. Authentication is done using the MD-5 message based digest protocol. Authentication cannot be configured globally and can be applied per peer only. The authentication key can be any combination of letters or numbers. Note that the string may contain embedded nulls. By default all MSDP messages are accepted and the MD5 signature option authentication key is disabled" DEFVAL { ''H } ::= { tmnxMsdpPeerGrpPeerEntry 8 } tmnxMsdpPeerGrpPeerAKeyEncrypt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of tmnxMsdpPeerGrpPeerAKeyEncrypt is 'true', the password specified by tmnxMsdpPeerGrpPeerAuthKey is in the encrypted form. When the value of tmnxMsdpPeerGrpPeerAKeyEncrypt is 'false', the password specified by tmnxMsdpPeerGrpPeerAuthKey is in plain text. tmnxMsdpPeerGrpPeerAuthKey and tmnxMsdpPeerGrpPeerAKeyEncrypt, which indicates whether or not the password string is encrypted, must be set together in the same SNMP request PDU or else the set request will fail with an inconsistentValue error." DEFVAL { true } ::= { tmnxMsdpPeerGrpPeerEntry 9 } tmnxMsdpPeerGrpPeerDefaultPeer OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerDefaultPeer is used to configure a peer as the default MSDP peer due to which all source-active messages from the peer will be accepted without the usual peer-reverse-path-forwarding (RPF) check." DEFVAL { false } ::= { tmnxMsdpPeerGrpPeerEntry 10 } tmnxMsdpPeerGrpPeerAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerAdminState specifies the desired administrative state for a peer under a MSDP peer group. When tmnxMsdpPeerGrpPeerAdminState is 'outOfService' the operational state of the MSDP peer is disabled. By default, tmnxMsdpPeerGrpPeerAdminState is 'inService'." DEFVAL { inService } ::= { tmnxMsdpPeerGrpPeerEntry 11 } tmnxMsdpPeerGrpPeerExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerExportPolicy1 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerGrpPeerExportPolicy1 specifies policy number 1 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 12 } tmnxMsdpPeerGrpPeerExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerExportPolicy2 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy2 specifies policy number 2 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 13 } tmnxMsdpPeerGrpPeerExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerExportPolicy3 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy3 specifies policy number 3 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 14 } tmnxMsdpPeerGrpPeerExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerExportPolicy4 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy4 specifies policy number 4 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 15 } tmnxMsdpPeerGrpPeerExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerExportPolicy5 specifies the export policy to export Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerExportPolicy1 specifies policy number 5 at the protocol level. By default no export policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 16 } tmnxMsdpPeerGrpPeerImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerImportPolicy1 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. A maximum of five policy names can be specified. tmnxMsdpPeerGrpPeerImportPolicy1 specifies policy number 1 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 17 } tmnxMsdpPeerGrpPeerImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerImportPolicy2 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy2 specifies policy number 2 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 18 } tmnxMsdpPeerGrpPeerImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerImportPolicy3 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy3 specifies policy number 3 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 19 } tmnxMsdpPeerGrpPeerImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerImportPolicy4 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy4 specifies policy number 4 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 20 } tmnxMsdpPeerGrpPeerImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerImportPolicy5 specifies the import policy to import Source Active (SA) state from the SA list into MSDP. tmnxMsdpPeerGrpPeerImportPolicy5 specifies policy number 5 at the protocol level. By default no import policies are applied and all SA entries are announced." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 21 } tmnxMsdpPeerGrpPeerLocAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerLocAddrType indicates the type of tmnxMsdpPeerGrpPeerLocalAddress." DEFVAL { unknown } ::= { tmnxMsdpPeerGrpPeerEntry 22 } tmnxMsdpPeerGrpPeerLocalAddress OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerLocalAddress is used to configure the local end of a MSDP session. In order for MSDP to function at least one peer must be configured. When configuring a peer, the local end of the MSDP session must be configured. This address is used to validate incoming connections to the peer and to establish connections to the remote peer. By default no local address is configured." DEFVAL { ''H } -- the empty string ::= { tmnxMsdpPeerGrpPeerEntry 23 } tmnxMsdpPeerGrpPeerState OBJECT-TYPE SYNTAX INTEGER { listen (0), established (1), inactive (2), disabled (3), connecting (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerState indicates the status of the connection." ::= { tmnxMsdpPeerGrpPeerEntry 24 } tmnxMsdpPeerGrpPeerLastUpOrDown OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerLastUpOrDown indicates the time at which the most recent peer-state change occurred." ::= { tmnxMsdpPeerGrpPeerEntry 25 } tmnxMsdpPeerGrpPeerConRetry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerConRetry indicates number of peer connection retry attempts." ::= { tmnxMsdpPeerGrpPeerEntry 26 } tmnxMsdpPeerGrpPeerStateTimer OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerStateTimer indicates the number of seconds to wait before another message is sent to a peer." ::= { tmnxMsdpPeerGrpPeerEntry 27 } tmnxMsdpPeerGrpPeerTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerTimeout indicates the number of seconds to wait for a response from the peer before declaring the peer unavailable." ::= { tmnxMsdpPeerGrpPeerEntry 28 } tmnxMsdpPeerGrpPeerSAAccepted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerSAAccepted indicates the number of entries in the source-active cache accepted from the peer." ::= { tmnxMsdpPeerGrpPeerEntry 29 } tmnxMsdpPeerGrpPeerSARecvd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerSARecvd indicates the number of entries in the source-active cache received by the peer." ::= { tmnxMsdpPeerGrpPeerEntry 30 } tmnxMsdpPeerGrpPeerLastASLimit OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerGrpPeerLastASLimit indicates the time that the last active source limit was triggered." ::= { tmnxMsdpPeerGrpPeerEntry 31 } tmnxMsdpSourceTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxMsdpSourceTable provides a listing of all MSDP Source configuration." ::= { tmnxMsdpObjects 5 } tmnxMsdpSourceEntry OBJECT-TYPE SYNTAX TmnxMsdpSourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An tmnxMsdpSourceEntry represents a MSDP Source configuration. Entries can be created and deleted via SNMP SET operations." INDEX { tmnxMsdpSourcePrefixType, tmnxMsdpSourcePrefix, tmnxMsdpSourceMask } ::= { tmnxMsdpSourceTable 1 } TmnxMsdpSourceEntry ::= SEQUENCE { tmnxMsdpSourcePrefixType InetAddressType, tmnxMsdpSourcePrefix InetAddress, tmnxMsdpSourceMask InetAddressPrefixLength, tmnxMsdpSourceRowStatus RowStatus, tmnxMsdpSourceMaxActiveSources Integer32, tmnxMsdpSourceDiscMethod INTEGER, tmnxMsdpSourceSrcActMsgsExMax Counter32, tmnxMsdpSourceLastExEventTime TimeStamp } tmnxMsdpSourcePrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSourcePrefixType indicates the type of tmnxMsdpSourcePrefix." ::= { tmnxMsdpSourceEntry 1 } tmnxMsdpSourcePrefix OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSourcePrefix indicates the IP address of the sources from which the source active messages would be accepted." ::= { tmnxMsdpSourceEntry 2 } tmnxMsdpSourceMask OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSourceMask indicates the mask to be used along with tmnxMsdpSourcePrefix to obtain the range of addresses from which the router can accept source active messages. " ::= { tmnxMsdpSourceEntry 3 } tmnxMsdpSourceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "tmnxMsdpSourceRowStatus is the object used for creating and deleting row entries in this table." ::= { tmnxMsdpSourceEntry 4 } tmnxMsdpSourceMaxActiveSources OBJECT-TYPE SYNTAX Integer32 (-1|0..1000000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxMsdpSourceMaxActiveSources specifies the maximum number of source active messages that will be accepted by MSDP. This effectively controls the number of active sources that can be stored on the system. By default, no limit is placed on the number of source active messages and this is specified by the value '-1'. A value of 0 means that no source active messages will be accepted." DEFVAL { -1 } ::= { tmnxMsdpSourceEntry 5 } tmnxMsdpSourceDiscMethod OBJECT-TYPE SYNTAX INTEGER { dynamic (0), configured (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSourceDiscMethod indicates the discovery method for this multicast source. If the source entry was created by an user, the value of this field is 'configured'. If the source was created dynamically, the value is 'dynamic'" ::= { tmnxMsdpSourceEntry 6 } tmnxMsdpSourceSrcActMsgsExMax OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSourceSrcActMsgsExMax indicates the number of source active messages received from this source that exceeded the established maximum number." ::= { tmnxMsdpSourceEntry 7 } tmnxMsdpSourceLastExEventTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSourceLastExEventTime indicates the time the last exceed event was triggered." ::= { tmnxMsdpSourceEntry 8 } tmnxMsdpSrcActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpSrcActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxMsdpSrcActiveTable table stores the MSDP Source Active(SA) advertisements currently in the MSDP speaker's cache." ::= { tmnxMsdpObjects 6 } tmnxMsdpSrcActiveEntry OBJECT-TYPE SYNTAX TmnxMsdpSrcActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing an MSDP SA advertisement. The INDEX to this table includes msdpSACacheOriginRP for diagnosing incorrect MSDP advertisements; normally a Source and Group pair would be unique. This is a read-only table." INDEX { tmnxMsdpSrcActiveGroupAddrType, tmnxMsdpSrcActiveGroupAddr, tmnxMsdpSrcActiveSourceAddrType, tmnxMsdpSrcActiveSourceAddr, tmnxMsdpSrcActiveOriginRPType, tmnxMsdpSrcActiveOriginRP } ::= { tmnxMsdpSrcActiveTable 1 } TmnxMsdpSrcActiveEntry ::= SEQUENCE { tmnxMsdpSrcActiveGroupAddrType InetAddressType, tmnxMsdpSrcActiveGroupAddr InetAddress, tmnxMsdpSrcActiveSourceAddrType InetAddressType, tmnxMsdpSrcActiveSourceAddr InetAddress, tmnxMsdpSrcActiveOriginRPType InetAddressType, tmnxMsdpSrcActiveOriginRP InetAddress, tmnxMsdpSrcActivePrLearnFrType InetAddressType, tmnxMsdpSrcActivePeerLearntFrom InetAddress, tmnxMsdpSrcActiveRPFPeerType InetAddressType, tmnxMsdpSrcActiveRPFPeer InetAddress, tmnxMsdpSrcActiveUpTime TimeInterval, tmnxMsdpSrcActiveExpiryTime TimeInterval } tmnxMsdpSrcActiveGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveGroupAddrType indicates the address type of tmnxMsdpSrcActiveGroupAddr." ::= { tmnxMsdpSrcActiveEntry 1 } tmnxMsdpSrcActiveGroupAddr OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveGroupAddr indicates the group address of the Source Active entry." ::= { tmnxMsdpSrcActiveEntry 2 } tmnxMsdpSrcActiveSourceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveSourceAddrType indicates the address type of tmnxMsdpSrcActiveSourceAddr." ::= { tmnxMsdpSrcActiveEntry 3 } tmnxMsdpSrcActiveSourceAddr OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveSourceAddr indicates the source address of the Source Active entry." ::= { tmnxMsdpSrcActiveEntry 4 } tmnxMsdpSrcActiveOriginRPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveOriginRPType indicates the address type of tmnxMsdpSrcActiveOriginRP." ::= { tmnxMsdpSrcActiveEntry 5 } tmnxMsdpSrcActiveOriginRP OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveOriginRP indicates the origin RP address of the Source Active entry." ::= { tmnxMsdpSrcActiveEntry 6 } tmnxMsdpSrcActivePrLearnFrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActivePrLearnFrType indicates the address type of tmnxMsdpSrcActivePeerLearntFrom." ::= { tmnxMsdpSrcActiveEntry 7 } tmnxMsdpSrcActivePeerLearntFrom OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActivePeerLearntFrom indicates the peer from which this Source Active entry was last accepted." ::= { tmnxMsdpSrcActiveEntry 8 } tmnxMsdpSrcActiveRPFPeerType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveRPFPeerType indicates the address type of tmnxMsdpSrcActiveRPFPeer." ::= { tmnxMsdpSrcActiveEntry 9 } tmnxMsdpSrcActiveRPFPeer OBJECT-TYPE SYNTAX InetAddress(SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveRPFPeer indicates the peer from which an SA message corresponding to this cache entry would be accepted (i.e. the RPF peer for tmnxMsdpSrcActiveOriginRP). This may be different than tmnxMsdpSrcActivePeerLearntFrom if this entry was created by an MSDP SA-Response." ::= { tmnxMsdpSrcActiveEntry 10 } tmnxMsdpSrcActiveUpTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveUpTime indicates the time since this entry was first placed in the Source Active (SA) cache. It is the difference between the time that the entry was first placed in the SA cache and the current time." ::= { tmnxMsdpSrcActiveEntry 11 } tmnxMsdpSrcActiveExpiryTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActiveExpiryTime indicates the time remaining before this entry will expire from the Source Active (SA) cache. It is difference between the current time and the time that the entry will expire." ::= { tmnxMsdpSrcActiveEntry 12 } tmnxMsdpPeerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpPeerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxMsdpPeerStatsTable is the statistics information related to a MSDP peer." ::= { tmnxMsdpObjects 7 } tmnxMsdpPeerStatsEntry OBJECT-TYPE SYNTAX TmnxMsdpPeerStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "tmnxMsdpPeerStatsEntry is an entry (conceptual row) in the tmnxMsdpPeerStatsTable. Each entry represents a MSDP peer related statistics information." AUGMENTS { tmnxMsdpPeerEntry } ::= { tmnxMsdpPeerStatsTable 1 } TmnxMsdpPeerStatsEntry ::= SEQUENCE { tmnxMsdpPeerStatsActSrcLimExcd Counter32, tmnxMsdpPeerStatsLastStChange TimeInterval, tmnxMsdpPeerStatsLastMsgPeer TimeInterval, tmnxMsdpPeerStatsRPFFailures Counter32, tmnxMsdpPeerStatsRemoteCloses Counter32, tmnxMsdpPeerStatsPeerTimeouts Counter32, tmnxMsdpPeerStatsSAMsgsSent Counter32, tmnxMsdpPeerStatsSAMsgsRecvd Counter32, tmnxMsdpPeerStatsSAReqMsgsSent Counter32, tmnxMsdpPeerStatsSAReqMsgsRecvd Counter32, tmnxMsdpPeerStatsSAResMsgsSent Counter32, tmnxMsdpPeerStatsSAResMsgsRecvd Counter32, tmnxMsdpPeerStatsKAMsgsSent Counter32, tmnxMsdpPeerStatsKAMsgsRecvd Counter32, tmnxMsdpPeerStatsUnknMsgsRecvd Counter32, tmnxMsdpPeerStatsErrorMsgsRecvd Counter32, tmnxMsdpPeerStatsSALearnt Gauge32, tmnxMsdpPeerStatsSARejExpPolicy Counter32, tmnxMsdpPeerStatsSARejImpPolicy Counter32, tmnxMsdpPeerStatsResvMsgsRecvd Counter32 } tmnxMsdpPeerStatsActSrcLimExcd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsActSrcLimExcd indicates the number of times the global active source limit has been exceeded by this peer instance." ::= { tmnxMsdpPeerStatsEntry 1 } tmnxMsdpPeerStatsLastStChange OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsLastStChange indicates how long ago the peer state changed." ::= { tmnxMsdpPeerStatsEntry 2 } tmnxMsdpPeerStatsLastMsgPeer OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsLastMsgPeer indicates how long ago the last message was received from this peer instance." ::= { tmnxMsdpPeerStatsEntry 3 } tmnxMsdpPeerStatsRPFFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsRPFFailures indicates number of reverse path forwarding (RPF) failures." ::= { tmnxMsdpPeerStatsEntry 4 } tmnxMsdpPeerStatsRemoteCloses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsRemoteCloses indicates the number of times the remote peer closed." ::= { tmnxMsdpPeerStatsEntry 5 } tmnxMsdpPeerStatsPeerTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsPeerTimeouts indicates the number of peer timeouts." ::= { tmnxMsdpPeerStatsEntry 6 } tmnxMsdpPeerStatsSAMsgsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSAMsgsSent indicates the number of source-active messages sent." ::= { tmnxMsdpPeerStatsEntry 7 } tmnxMsdpPeerStatsSAMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSAMsgsRecvd indicates the number of source-active messages received." ::= { tmnxMsdpPeerStatsEntry 8 } tmnxMsdpPeerStatsSAReqMsgsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSAReqMsgsSent indicates the number of source-active request messages sent." ::= { tmnxMsdpPeerStatsEntry 9 } tmnxMsdpPeerStatsSAReqMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSAReqMsgsRecvd indicates the number of source-active request messages received." ::= { tmnxMsdpPeerStatsEntry 10 } tmnxMsdpPeerStatsSAResMsgsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSAResMsgsSent indicates the number of source-active response messages sent." ::= { tmnxMsdpPeerStatsEntry 11 } tmnxMsdpPeerStatsSAResMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSAResMsgsRecvd indicates the number of source-active response messages received." ::= { tmnxMsdpPeerStatsEntry 12 } tmnxMsdpPeerStatsKAMsgsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsKAMsgsSent indicates the number of keep-alive messages sent." ::= { tmnxMsdpPeerStatsEntry 13 } tmnxMsdpPeerStatsKAMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsKAMsgsRecvd indicates the number of keep-alive messages received." ::= { tmnxMsdpPeerStatsEntry 14 } tmnxMsdpPeerStatsUnknMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsUnknMsgsRecvd indicates the number of unknown messages received." ::= { tmnxMsdpPeerStatsEntry 15 } tmnxMsdpPeerStatsErrorMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsErrorMsgsRecvd indicates number of error messages received." ::= { tmnxMsdpPeerStatsEntry 16 } tmnxMsdpPeerStatsSALearnt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSALearnt indicates the number of unique source active entries in the cache learned from the peer." ::= { tmnxMsdpPeerStatsEntry 17 } tmnxMsdpPeerStatsSARejExpPolicy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSARejExpPolicy indicates the number of source active messages from the peer that were not sent due to export policy." ::= { tmnxMsdpPeerStatsEntry 18 } tmnxMsdpPeerStatsSARejImpPolicy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsSARejImpPolicy indicates the number of source active messages from the peer that were rejected due to import policy." ::= { tmnxMsdpPeerStatsEntry 19 } tmnxMsdpPeerStatsResvMsgsRecvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpPeerStatsResvMsgsRecvd indicates the number of MSDP messages received with type 'Reserved'." ::= { tmnxMsdpPeerStatsEntry 20 } tmnxMsdpSrcActRejTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxMsdpSrcActRejEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxMsdpSrcActRejTable table stores the MSDP Source Active(SA) advertisements rejected from the MSDP speaker's cache." ::= { tmnxMsdpObjects 8 } tmnxMsdpSrcActRejEntry OBJECT-TYPE SYNTAX TmnxMsdpSrcActRejEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry representing an MSDP SA advertisement that is rejected. This is a read-only table." INDEX { tmnxMsdpSrcActRejPeerGroupName, tmnxMsdpSrcActRejGroupAddrType, tmnxMsdpSrcActRejGroupAddr, tmnxMsdpSrcActRejSourceAddrType, tmnxMsdpSrcActRejSourceAddr, tmnxMsdpSrcActRejOriginRPType, tmnxMsdpSrcActRejOriginRP, tmnxMsdpSrcActRejPeerAddrType, tmnxMsdpSrcActRejPeerAddr } ::= { tmnxMsdpSrcActRejTable 1 } TmnxMsdpSrcActRejEntry ::= SEQUENCE { tmnxMsdpSrcActRejPeerGroupName TNamedItemOrEmpty, tmnxMsdpSrcActRejGroupAddrType InetAddressType, tmnxMsdpSrcActRejGroupAddr InetAddress, tmnxMsdpSrcActRejSourceAddrType InetAddressType, tmnxMsdpSrcActRejSourceAddr InetAddress, tmnxMsdpSrcActRejOriginRPType InetAddressType, tmnxMsdpSrcActRejOriginRP InetAddress, tmnxMsdpSrcActRejPeerAddrType InetAddressType, tmnxMsdpSrcActRejPeerAddr InetAddress, tmnxMsdpSrcActRejFailureReason INTEGER } tmnxMsdpSrcActRejPeerGroupName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejPeerGroupName indicates the peer group name of the Source Active entry that is rejected." ::= { tmnxMsdpSrcActRejEntry 1 } tmnxMsdpSrcActRejGroupAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejGroupAddrType indicates the address type of tmnxMsdpSrcActRejGroupAddr." ::= { tmnxMsdpSrcActRejEntry 2 } tmnxMsdpSrcActRejGroupAddr OBJECT-TYPE SYNTAX InetAddress(SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejGroupAddr indicates the group address of the Source Active entry that is rejected." ::= { tmnxMsdpSrcActRejEntry 3 } tmnxMsdpSrcActRejSourceAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejSourceAddrType indicates the address type of tmnxMsdpSrcActRejSourceAddr." ::= { tmnxMsdpSrcActRejEntry 4 } tmnxMsdpSrcActRejSourceAddr OBJECT-TYPE SYNTAX InetAddress(SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejSourceAddr indicates the source address of the Source Active entry that is rejected." ::= { tmnxMsdpSrcActRejEntry 5 } tmnxMsdpSrcActRejOriginRPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejOriginRPType indicates the address type of tmnxMsdpSrcActRejOriginRP." ::= { tmnxMsdpSrcActRejEntry 6 } tmnxMsdpSrcActRejOriginRP OBJECT-TYPE SYNTAX InetAddress(SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejOriginRP indicates the origin rendezvous point (RP) address of the Source Active entry that is rejected." ::= { tmnxMsdpSrcActRejEntry 7 } tmnxMsdpSrcActRejPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejPeerAddrType indicates the address type of tmnxMsdpSrcActRejPeerAddr." ::= { tmnxMsdpSrcActRejEntry 8 } tmnxMsdpSrcActRejPeerAddr OBJECT-TYPE SYNTAX InetAddress(SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejPeerAddr indicates the peer from which this rejected Source Active entry was last received." ::= { tmnxMsdpSrcActRejEntry 9 } tmnxMsdpSrcActRejFailureReason OBJECT-TYPE SYNTAX INTEGER { importPolicyFailure (1), exportPolicyFailure (2), rpfFailure (3), actSrcLimitExceeded (4), srcActSrcLimitExceeded (5), peerActSrcLimitExceeded (6), groupActSrcLimitExceeded (7), groupPeerActSrcLimitExceeded (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxMsdpSrcActRejFailureReason indicates the reason why this Source Active entry is rejected." ::= { tmnxMsdpSrcActRejEntry 10 } -- -- Notification Definition section -- tmnxMsdpActSrcLimExcd NOTIFICATION-TYPE OBJECTS { tmnxMsdpMaxActiveSources, tmnxMsdpStatusActSrcLimExceeded } STATUS current DESCRIPTION "The tmnxMsdpActSrcLimExcd event is generated whenever the global active source limit has been exceeded." ::= { tmnxMsdpNotifications 1 } tmnxMsdpPeerActSrcLimExcd NOTIFICATION-TYPE OBJECTS { tmnxMsdpPeerStatsActSrcLimExcd } STATUS current DESCRIPTION "The tmnxMsdpPeerActSrcLimExcd event is generated whenever the active source limit has been exceeded for the peer." ::= { tmnxMsdpNotifications 2 } tmnxMsdpRPFFailure NOTIFICATION-TYPE OBJECTS { tmnxMsdpSrcActiveRPFPeerType, tmnxMsdpSrcActiveRPFPeer } STATUS current DESCRIPTION "The tmnxMsdpRPFFailure event is generated whenever a RPF(Reverse Path Forwarding) failure occurs for a source configured by user." ::= { tmnxMsdpNotifications 3 } tmnxMsdpSourceSrcActMsgsExcd NOTIFICATION-TYPE OBJECTS { tmnxMsdpSourceMaxActiveSources, tmnxMsdpSourceSrcActMsgsExMax } STATUS current DESCRIPTION "The tmnxMsdpSourceSrcActMsgsExcd event is generated when the source active messages received from this source has exceeded the established maximum number." ::= { tmnxMsdpNotifications 4 } tmnxMsdpGroupSrcActMsgsExcd NOTIFICATION-TYPE OBJECTS { tmnxMsdpPeerGroupMaxActSources, tmnxMsdpPeerGroupActMsgsExMax } STATUS current DESCRIPTION "The tmnxMsdpGroupSrcActMsgsExcd event is generated when the source active messages received from this group has exceeded the established maximum number." ::= { tmnxMsdpNotifications 5 } -- compliance statements tmnxMsdpCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of MSDP features on Alcatel 7x50 SR series systems." MODULE MANDATORY-GROUPS { tmnxMsdpGlobalGroup, tmnxMsdpPeerGroup, tmnxMsdpPeerGroupGroup, tmnxMsdpSourceGroup, tmnxMsdpSrcActiveGroup, tmnxMsdpNotificationGroup } ::= { tmnxMsdpCompliances 1 } tmnxMsdpV10v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of MSDP features on Alcatel 7x50 SR series systems." MODULE MANDATORY-GROUPS { tmnxMsdpGlobalGroup, tmnxMsdpPeerGroup, tmnxMsdpPeerGroupGroup, tmnxMsdpSourceGroup, tmnxMsdpSrcActiveGroup, tmnxMsdpSrcActiveRejGroup, tmnxMsdpNotificationGroup } ::= { tmnxMsdpCompliances 2 } -- units of conformance tmnxMsdpGlobalGroup OBJECT-GROUP OBJECTS { tmnxMsdpMaxActiveSources, tmnxMsdpMsgRcvRate, tmnxMsdpMsgRcvRateTime, tmnxMsdpMsgRcvRateThd, tmnxMsdpDataEncapsulation, tmnxMsdpAdminState, tmnxMsdpExportPolicy1, tmnxMsdpExportPolicy2, tmnxMsdpExportPolicy3, tmnxMsdpExportPolicy4, tmnxMsdpExportPolicy5, tmnxMsdpImportPolicy1, tmnxMsdpImportPolicy2, tmnxMsdpImportPolicy3, tmnxMsdpImportPolicy4, tmnxMsdpImportPolicy5, tmnxMsdpLocalAddress, tmnxMsdpLocalAddressType, tmnxMsdpStatusPeerCount, tmnxMsdpStatusPeersEstablished, tmnxMsdpStatusSACount, tmnxMsdpStatusLastTimeUp, tmnxMsdpStatusActSrcLimExceeded, tmnxMsdpRpfLookupSequence, tmnxMsdpSACacheLifetime, tmnxMsdpSARejectExportPolicy, tmnxMsdpSARejectImportPolicy } STATUS current DESCRIPTION "A collection of global objects supporting management of MSDP protocol on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 1 } tmnxMsdpPeerGroup OBJECT-GROUP OBJECTS { tmnxMsdpPeerRowStatus, tmnxMsdpPeerMaxActiveSources, tmnxMsdpPeerMsgRcvRate, tmnxMsdpPeerMsgRcvRateTime, tmnxMsdpPeerMsgRcvRateThd, tmnxMsdpPeerAuthKey, tmnxMsdpPeerAuthKeyEncrypted, tmnxMsdpPeerDefaultPeer, tmnxMsdpPeerAdminState, tmnxMsdpPeerExportPolicy1, tmnxMsdpPeerExportPolicy2 , tmnxMsdpPeerExportPolicy3 , tmnxMsdpPeerExportPolicy4 , tmnxMsdpPeerExportPolicy5, tmnxMsdpPeerImportPolicy1, tmnxMsdpPeerImportPolicy2 , tmnxMsdpPeerImportPolicy3, tmnxMsdpPeerImportPolicy4, tmnxMsdpPeerImportPolicy5, tmnxMsdpPeerLocalAddressType, tmnxMsdpPeerLocalAddress, tmnxMsdpPeerGrpPeerRowStatus, tmnxMsdpPeerGrpPeerMaxActSrcs, tmnxMsdpPeerGrpPeerMsgRcvRt, tmnxMsdpPeerGrpPeerMsgRcvRtTime, tmnxMsdpPeerGrpPeerMsgRcvRtThd , tmnxMsdpPeerGrpPeerAuthKey, tmnxMsdpPeerGrpPeerAKeyEncrypt, tmnxMsdpPeerGrpPeerDefaultPeer, tmnxMsdpPeerGrpPeerAdminState, tmnxMsdpPeerGrpPeerExportPolicy1, tmnxMsdpPeerGrpPeerExportPolicy2, tmnxMsdpPeerGrpPeerExportPolicy3, tmnxMsdpPeerGrpPeerExportPolicy4, tmnxMsdpPeerGrpPeerExportPolicy5, tmnxMsdpPeerGrpPeerImportPolicy1, tmnxMsdpPeerGrpPeerImportPolicy2, tmnxMsdpPeerGrpPeerImportPolicy3, tmnxMsdpPeerGrpPeerImportPolicy4, tmnxMsdpPeerGrpPeerImportPolicy5, tmnxMsdpPeerGrpPeerLocAddrType, tmnxMsdpPeerGrpPeerLocalAddress, tmnxMsdpPeerStatsActSrcLimExcd, tmnxMsdpPeerStatsLastStChange, tmnxMsdpPeerStatsLastMsgPeer, tmnxMsdpPeerStatsRPFFailures, tmnxMsdpPeerStatsRemoteCloses, tmnxMsdpPeerStatsPeerTimeouts, tmnxMsdpPeerStatsSAMsgsSent, tmnxMsdpPeerStatsSAMsgsRecvd, tmnxMsdpPeerStatsSAReqMsgsSent, tmnxMsdpPeerStatsSAReqMsgsRecvd, tmnxMsdpPeerStatsSAResMsgsSent, tmnxMsdpPeerStatsSAResMsgsRecvd, tmnxMsdpPeerStatsKAMsgsSent, tmnxMsdpPeerStatsKAMsgsRecvd, tmnxMsdpPeerStatsUnknMsgsRecvd, tmnxMsdpPeerStatsErrorMsgsRecvd, tmnxMsdpPeerStatsSALearnt, tmnxMsdpPeerStatsSARejExpPolicy, tmnxMsdpPeerStatsSARejImpPolicy, tmnxMsdpPeerStatsResvMsgsRecvd, tmnxMsdpPeerState, tmnxMsdpPeerLastUpOrDown, tmnxMsdpPeerConRetry, tmnxMsdpPeerStateTimer, tmnxMsdpPeerTimeout, tmnxMsdpPeerSAAccepted, tmnxMsdpPeerSARecvd, tmnxMsdpPeerLastASLimit, tmnxMsdpPeerGrpPeerState, tmnxMsdpPeerGrpPeerLastUpOrDown, tmnxMsdpPeerGrpPeerConRetry, tmnxMsdpPeerGrpPeerStateTimer, tmnxMsdpPeerGrpPeerTimeout, tmnxMsdpPeerGrpPeerSAAccepted, tmnxMsdpPeerGrpPeerSARecvd, tmnxMsdpPeerGrpPeerLastASLimit } STATUS current DESCRIPTION "A collection of objects supporting management of MSDP peers on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 2 } tmnxMsdpPeerGroupGroup OBJECT-GROUP OBJECTS { tmnxMsdpPeerGroupRowStatus, tmnxMsdpPeerGroupMsgRcvRate, tmnxMsdpPeerGroupMsgRcvRateTime, tmnxMsdpPeerGroupMsgRcvRateThd, tmnxMsdpPeerGroupAdminState, tmnxMsdpPeerGroupExportPolicy1, tmnxMsdpPeerGroupExportPolicy2, tmnxMsdpPeerGroupExportPolicy3, tmnxMsdpPeerGroupExportPolicy4, tmnxMsdpPeerGroupExportPolicy5, tmnxMsdpPeerGroupImportPolicy1, tmnxMsdpPeerGroupImportPolicy2, tmnxMsdpPeerGroupImportPolicy3, tmnxMsdpPeerGroupImportPolicy4, tmnxMsdpPeerGroupImportPolicy5, tmnxMsdpPeerGroupLocalAddrType, tmnxMsdpPeerGroupLocalAddress, tmnxMsdpPeerGroupMode, tmnxMsdpPeerGroupMaxActSources, tmnxMsdpPeerGroupActMsgsExMax, tmnxMsdpPeerGrpSARejExpPolicy, tmnxMsdpPeerGrpSARejImpPolicy } STATUS current DESCRIPTION "A collection of objects supporting management of MSDP peer groups on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 3 } tmnxMsdpSourceGroup OBJECT-GROUP OBJECTS { tmnxMsdpSourceRowStatus, tmnxMsdpSourceMaxActiveSources, tmnxMsdpSourceDiscMethod, tmnxMsdpSourceSrcActMsgsExMax, tmnxMsdpSourceLastExEventTime } STATUS current DESCRIPTION "A collection of objects supporting management of MSDP sources on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 4 } tmnxMsdpSrcActiveGroup OBJECT-GROUP OBJECTS { tmnxMsdpSrcActivePrLearnFrType, tmnxMsdpSrcActivePeerLearntFrom, tmnxMsdpSrcActiveRPFPeerType, tmnxMsdpSrcActiveRPFPeer, tmnxMsdpSrcActiveUpTime, tmnxMsdpSrcActiveExpiryTime } STATUS current DESCRIPTION "A collection of objects supporting management of MSDP source active information on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 5 } tmnxMsdpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxMsdpActSrcLimExcd, tmnxMsdpPeerActSrcLimExcd, tmnxMsdpRPFFailure, tmnxMsdpSourceSrcActMsgsExcd, tmnxMsdpGroupSrcActMsgsExcd } STATUS current DESCRIPTION "The group of notifications supporting management of the MSDP operations on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 6 } tmnxMsdpSrcActiveRejGroup OBJECT-GROUP OBJECTS { tmnxMsdpSrcActRejFailureReason } STATUS current DESCRIPTION "A collection of objects supporting management of MSDP rejected source active information on Alcatel 7x50 SR series systems." ::= { tmnxMsdpGroups 7 } END