TIMETRA-MPLS-TP-MIB DEFINITIONS ::= BEGIN IMPORTS InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI RowStatus, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue FROM SNMPv2-TC timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs FROM TIMETRA-GLOBAL-MIB vRtrMplsLspIndex FROM TIMETRA-MPLS-MIB TNamedItem, TNamedItemOrEmpty, TmnxAdminState, TmnxEnabledDisabled, TmnxMplsTpGlobalID, TmnxMplsTpNodeID, TmnxMplsTpTunnelType, TmnxOperState, TmnxTunnelID FROM TIMETRA-TC-MIB vRtrID, vRtrIfIndex FROM TIMETRA-VRTR-MIB ; timetraMplsTpMIBModule MODULE-IDENTITY LAST-UPDATED "201601010000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the MPLS Transport Profile (TP) components of the Nokia SROS. Copyright (c) 2012-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201601010000Z" DESCRIPTION "Rev 14.0 1 Jan 2016 00:00 14.0 release of the TIMETRA-MPLS-TP-MIB." REVISION "201401010000Z" DESCRIPTION "Rev 12.0 1 Jan 2014 00:00 12.0 release of the TIMETRA-MPLS-TP-MIB." REVISION "201206010000Z" DESCRIPTION "Rev 1.0 1 Jun 2012 00:00 Initial release of the TIMETRA-MPLS-TP-MIB." ::= { timetraSRMIBModules 83 } VRtrMplsTpLspPathMepPduType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The VRtrMplsTpLspPathMepPduType specifies the 4 byte APS-specific information within each MPLS-TP APS PDU. The information is encoded as shown below. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |Ver|Request|PT |R| Reserved1 | FPath | Path | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+" SYNTAX OCTET STRING (SIZE (4)) vRtrMplsTpObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 83 } vRtrMplsTpConfigTimeStamps OBJECT IDENTIFIER ::= { vRtrMplsTpObjs 1 } vRtrMplsTpSystemTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpSystemTableLastChanged indicates the time, since system startup, when the vRtrMplsTpSystemTable last changed state." ::= { vRtrMplsTpConfigTimeStamps 1 } vRtrMplsTpOamTemplTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpOamTemplTblLastChanged indicates the last time, since system startup, when the vRtrMplsTpOamTemplateCfgTable last changed state." ::= { vRtrMplsTpConfigTimeStamps 2 } vRtrMplsTpPtcTemplTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTemplTblLastChanged indicates the last time, since system startup, when the vRtrMplsTpPtcTemplateCfgTable changed state." ::= { vRtrMplsTpConfigTimeStamps 3 } vRtrMplsTpLspPathTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathTblLastChanged indicates the last time, since system startup, that the vRtrMplsTpLspPathTable changed state." ::= { vRtrMplsTpConfigTimeStamps 5 } vRtrMplsTpLspPathMepTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepTblLastChg indicates the last time, since system startup, that the vRtrMplsTpLspPathMepTable changed state." ::= { vRtrMplsTpConfigTimeStamps 6 } vRtrMplsTpLsrTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLsrTblLastChanged indicates the last time, since system startup, when the vRtrMplsTpLsrCfgTable changed state." ::= { vRtrMplsTpConfigTimeStamps 7 } vRtrMplsTpLsrPathIdTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdTblLastChg indicates the last time, since system startup, when the vRtrMplsTpLsrPathIdTable changed state." ::= { vRtrMplsTpConfigTimeStamps 8 } vRtrMplsTpLsrMipCfgTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLsrMipCfgTblLastChg indicates the last time, since system startup, when the vRtrMplsTpLsrMipCfgTable changed state." ::= { vRtrMplsTpConfigTimeStamps 9 } vRtrMplsTpIfTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpIfTblLastChanged indicates the last time, since system startup, when the vRtrMplsTpIfCfgTable changed state." ::= { vRtrMplsTpConfigTimeStamps 10 } vRtrMplsTpConfigurations OBJECT IDENTIFIER ::= { vRtrMplsTpObjs 2 } vRtrMplsTpSystemIdentifiers OBJECT IDENTIFIER ::= { vRtrMplsTpConfigurations 1 } vRtrMplsTpSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpSystemTable consists of the globally unique configuration objects for MPLS-TP. These objects are typically required to be set prior to configuring MPLS-TP LSP objects." ::= { vRtrMplsTpSystemIdentifiers 1 } vRtrMplsTpSystemEntry OBJECT-TYPE SYNTAX VRtrMplsTpSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpSystemEntry contains the globally unique configuration objects for MPLS-TP." INDEX { vRtrID } ::= { vRtrMplsTpSystemTable 1 } VRtrMplsTpSystemEntry ::= SEQUENCE { vRtrMplsTpRowStatus RowStatus, vRtrMplsTpGlobalId TmnxMplsTpGlobalID, vRtrMplsTpNodeId TmnxMplsTpNodeID, vRtrMplsTpTunnelIdMin Unsigned32, vRtrMplsTpTunnelIdMax Unsigned32, vRtrMplsTpAdminState TmnxAdminState, vRtrMplsTpInheritance BITS } vRtrMplsTpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpRowStatus specifies the row status of the MPLS-TP system entry. A row must exist in this table for a specified virtual router ID for MPLS-TP LSP configuration to be allowed." ::= { vRtrMplsTpSystemEntry 1 } vRtrMplsTpGlobalId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpGlobalId specifies the AS number of the node." DEFVAL { 0 } ::= { vRtrMplsTpSystemEntry 2 } vRtrMplsTpNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpNodeId specifies the unique node identifier for the given global ID. If not specified, the MPLS Router ID of the node is used." DEFVAL { 0 } ::= { vRtrMplsTpSystemEntry 3 } vRtrMplsTpTunnelIdMin OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..61440) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelIdMin specifies the start range of tunnel ids reserved for MPLS-TP LSPs. This variable must be set along with vRtrMplsTpTunnelIdMax to indicate the range of tunnel ids reserved for MPLS-TP LSPs. A value of 0 indicates that tunnel ids are not reserved for MPLS-TP LSPs." DEFVAL { 0 } ::= { vRtrMplsTpSystemEntry 4 } vRtrMplsTpTunnelIdMax OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..61440) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelIdMax specifies the end range of tunnel ids reserved for MPLS-TP LSPs. This variable must be set along with vRtrMplsTpTunnelIdMin to indicate the range of tunnel ids reserved for MPLS-TP LSPs. A value of 0 indicates that tunnel ids are not reserved for MPLS-TP LSPs." DEFVAL { 0 } ::= { vRtrMplsTpSystemEntry 5 } vRtrMplsTpAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpAdminState specifies the desired administrative state of MPLS-TP on this router." DEFVAL { outOfService } ::= { vRtrMplsTpSystemEntry 6 } vRtrMplsTpInheritance OBJECT-TYPE SYNTAX BITS { vRtrMplsTpNodeId (0) } MAX-ACCESS read-create STATUS current DESCRIPTION "For each writable object in this row that can be configured to inherit its value from the corresponding object in the vRtrIpAddrTable, there is bit within vRtrMplsTpInheritance that controls whether to inherit the operational value of the object or use the administratively set value. Non mask bits will always have value of zero. This object is a bit-mask, with the following objects: vRtrMplsTpNodeId 0x1 When the bit for an object is set to one, then the object's administrative and operational value are inherited from the corresponding object in vRtrIpAddrTable. When the bit for an object is set to zero, then the object's administrative and operational value are whatever the DEFVAL or most recently SET value is." DEFVAL { {} } ::= { vRtrMplsTpSystemEntry 7 } vRtrMplsTpTemplateObjects OBJECT IDENTIFIER ::= { vRtrMplsTpConfigurations 2 } vRtrMplsTpOamTemplateCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpOamTemplateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpOamTemplateCfgTable maintains the MPLS-TP Templates used by MPLS-TP OAM. The template is specific to the OAM protocol and can be used to configure MPLS-TP-OAM parameters such as BFD Tx/Rx timer intervals, multiplier and any other relevant session/fault management parameters. The OAM template is referenced in the MPLS-TP path configuration, so different values are possible for the working and protect paths of a tunnel." ::= { vRtrMplsTpTemplateObjects 1 } vRtrMplsTpOamTemplateCfgEntry OBJECT-TYPE SYNTAX VRtrMplsTpOamTemplateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpOamTemplateCfgEntry contains the configuration items maintained by the vRtrMplsTpOamTemplateCfgTable." INDEX { vRtrID, IMPLIED vRtrMplsTpOamTmplName } ::= { vRtrMplsTpOamTemplateCfgTable 1 } VRtrMplsTpOamTemplateCfgEntry ::= SEQUENCE { vRtrMplsTpOamTmplName TNamedItem, vRtrMplsTpOamTmplRowStatus RowStatus, vRtrMplsTpOamTmplLastChangedTime TimeStamp, vRtrMplsTpOamTmplBfdTemplateName TNamedItemOrEmpty, vRtrMplsTpOamTmplHoldTimeDown Unsigned32, vRtrMplsTpOamTmplHoldTimeUp Unsigned32 } vRtrMplsTpOamTmplName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value vRtrMplsTpOamTmplName specifies the unique name of the MPLS-TP OAM Template." ::= { vRtrMplsTpOamTemplateCfgEntry 1 } vRtrMplsTpOamTmplRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpOamTmplRowStatus specifies the row status of the MPLS-TP OAM Template entry. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed using the value 'destroy (6)'." ::= { vRtrMplsTpOamTemplateCfgEntry 2 } vRtrMplsTpOamTmplLastChangedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value vRtrMplsTpOamTmplLastChangedTime indicates the time, since system startup, that an columnar object in this row changed state." ::= { vRtrMplsTpOamTemplateCfgEntry 3 } vRtrMplsTpOamTmplBfdTemplateName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpOamTmplBfdTemplateName specifies the TIMETRA-BFD-MIB::tmnxBfdAdminTemplateName used by the OAM template." ::= { vRtrMplsTpOamTemplateCfgEntry 4 } vRtrMplsTpOamTmplHoldTimeDown OBJECT-TYPE SYNTAX Unsigned32 (0..5000) UNITS "centiseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpOamTmplHoldTimeDown specifies the time, in centiseconds, used for the hold-timer for the BFD Continuity Check (CC) session down event dampening. This guards against reporting excessive operational state transitions. This is implemented by not advertising subsequent transitions of the BFD CC state until the configured timer has expired. A value of zero (0) specifies that a down transition is reported immediately." DEFVAL { 0 } ::= { vRtrMplsTpOamTemplateCfgEntry 5 } vRtrMplsTpOamTmplHoldTimeUp OBJECT-TYPE SYNTAX Unsigned32 (0..500) UNITS "deciseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpOamTmplHoldTimeUp specifies the time, in deciseconds, used for the hold-timer for the BFD Continuity Check (CC) session up event dampening. This guards against reporting excessive operational state transitions. This is implemented by not advertising subsequent transitions of the BFD CC state until the configured timer has expired. A value of zero (0) specifies that an up transition is reported immediately." DEFVAL { 20 } ::= { vRtrMplsTpOamTemplateCfgEntry 6 } vRtrMplsTpPtcTemplateCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpPtcTemplateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpPtcTemplateCfgTable maintains the MPLS-TP Templates used for MPLS LSP Protection. Entries in this table maintain the common configuration elements used by the protected LSPs." REFERENCE "RFC6378" ::= { vRtrMplsTpTemplateObjects 2 } vRtrMplsTpPtcTemplateCfgEntry OBJECT-TYPE SYNTAX VRtrMplsTpPtcTemplateCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpPtcTemplateCfgEntry contains the configuration items maintained by the vRtrMplsTpPtcTemplateCfgTable." INDEX { vRtrID, IMPLIED vRtrMplsTpPtcTmplName } ::= { vRtrMplsTpPtcTemplateCfgTable 1 } VRtrMplsTpPtcTemplateCfgEntry ::= SEQUENCE { vRtrMplsTpPtcTmplName TNamedItem, vRtrMplsTpPtcTmplRowStatus RowStatus, vRtrMplsTpPtcTmplLastChangedTime TimeStamp, vRtrMplsTpPtcTmplProtectionMode INTEGER, vRtrMplsTpPtcTmplProtectionDir INTEGER, vRtrMplsTpPtcTmplRevertive INTEGER, vRtrMplsTpPtcTmplWaitToRestore Unsigned32, vRtrMplsTpPtcTmplRapidPscTimer Unsigned32, vRtrMplsTpPtcTmplSlowPscTimer Unsigned32 } vRtrMplsTpPtcTmplName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplName specifies the unique name of the MPLS-TP Protection Template." ::= { vRtrMplsTpPtcTemplateCfgEntry 1 } vRtrMplsTpPtcTmplRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplRowStatus specifies the row status of the MPLS-TP Protection Template. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the value 'destroy (6)'." ::= { vRtrMplsTpPtcTemplateCfgEntry 2 } vRtrMplsTpPtcTmplLastChangedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplLastChangedTime indicates the time, since system startup, that a columnar object in the MPLS-TP Protection Template entry last changed state." ::= { vRtrMplsTpPtcTemplateCfgEntry 3 } vRtrMplsTpPtcTmplProtectionMode OBJECT-TYPE SYNTAX INTEGER { one2one (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplProtectionMode specifies the mode used for determining which members are actively receiving and transmitting data. In the 'one2one (1)' (1:1) architecture, a protection transport path is dedicated to the working transport path of a single service, and the traffic is only transmitted on either the working or the protection path, by using a selector at the source of the protection domain. A selector at the sink of the protection domain then selects the path that carries the normal traffic. When the value is set to 'one2one (1)', only two members are allowed, and only one of them can be active at one point in time." REFERENCE "RFC 6378" DEFVAL { one2one } ::= { vRtrMplsTpPtcTemplateCfgEntry 4 } vRtrMplsTpPtcTmplProtectionDir OBJECT-TYPE SYNTAX INTEGER { bidirectional (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplProtectionDir specifies the directional mode of the Protection Template. bidirectional - provides protection in both directions." REFERENCE "RFC 6378" DEFVAL { bidirectional } ::= { vRtrMplsTpPtcTemplateCfgEntry 5 } vRtrMplsTpPtcTmplRevertive OBJECT-TYPE SYNTAX INTEGER { nonRevertive (1), revertive (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplRevertive specifies whether or not an instance of this Template will operate in a 'revertive (2)' or 'nonRevertive (1)' mode." REFERENCE "RFC 6378" DEFVAL { revertive } ::= { vRtrMplsTpPtcTemplateCfgEntry 6 } vRtrMplsTpPtcTmplWaitToRestore OBJECT-TYPE SYNTAX Unsigned32 (0..720) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplWaitToRestore specifies the Wait-To-Restore (WTR) timer, in seconds, after a cleared failure the working path must wait before reverting. The WTR timer is used to prevent frequent operation of the protection switching due to intermittent signal failure defects." REFERENCE "RFC 6378 Section 4.3.3.5" DEFVAL { 300 } ::= { vRtrMplsTpPtcTemplateCfgEntry 7 } vRtrMplsTpPtcTmplRapidPscTimer OBJECT-TYPE SYNTAX Unsigned32 (10 | 100 | 1000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplRapidPscTimer specifies the time, in milliseconds, for the Rapid Protection Switch Coordination (PSC) timer. When the protection domain state is changed, three PSC messages are transmitted as quickly as possible, to allow for rapid protection switching." REFERENCE "RFC 6378 Section 4.1" DEFVAL { 10 } ::= { vRtrMplsTpPtcTemplateCfgEntry 8 } vRtrMplsTpPtcTmplSlowPscTimer OBJECT-TYPE SYNTAX Unsigned32 (5..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpPtcTmplSlowPscTimer specifies the time, in seconds, for the Slow Protection Switch Coordination (PSC) timer used to continually transmit the PSC message." DEFVAL { 5 } ::= { vRtrMplsTpPtcTemplateCfgEntry 9 } vRtrMplsTpLspObjects OBJECT IDENTIFIER ::= { vRtrMplsTpConfigurations 3 } vRtrMplsTpLspPathTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLspPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathTable maintains the MPLS-TP configuration objects associated with an MPLS LSP path." ::= { vRtrMplsTpLspObjects 2 } vRtrMplsTpLspPathEntry OBJECT-TYPE SYNTAX VRtrMplsTpLspPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathEntry contains the configuration objects for the MPLS-TP path table." INDEX { vRtrID, vRtrMplsLspIndex, vRtrMplsTpLspPathIndex } ::= { vRtrMplsTpLspPathTable 1 } VRtrMplsTpLspPathEntry ::= SEQUENCE { vRtrMplsTpLspPathIndex INTEGER, vRtrMplsTpLspPathRowStatus RowStatus, vRtrMplsTpLspPathLastChangedTime TimeStamp, vRtrMplsTpLspPathAdminState TmnxAdminState, vRtrMplsTpLspPathOperState TmnxOperState, vRtrMplsTpLspPathReasonDownFlags BITS, vRtrMplsTpLspPathLspNumber Unsigned32, vRtrMplsTpLspPathInLabel Unsigned32, vRtrMplsTpLspPathOutLabel Unsigned32, vRtrMplsTpLspPathOutLink InterfaceIndexOrZero, vRtrMplsTpLspPathNextHopAddrType InetAddressType, vRtrMplsTpLspPathNextHopAddress InetAddress, vRtrMplsTpLspPathState INTEGER, vRtrMplsTpLspPathTimeUp TimeInterval, vRtrMplsTpLspPathTimeDown TimeInterval, vRtrMplsTpLspPathActiveTimeUp TimeInterval } vRtrMplsTpLspPathIndex OBJECT-TYPE SYNTAX INTEGER { working (1), protecting (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathIndex specifies the path index for the MPLS-TP LSP path. working (1) - A working path is the primary path for the LSP. protecting (2) - A protection path is the secondary path for the LSP." ::= { vRtrMplsTpLspPathEntry 1 } vRtrMplsTpLspPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathRowStatus specifies the row status of the MPLS-TP LSP Path." ::= { vRtrMplsTpLspPathEntry 2 } vRtrMplsTpLspPathLastChangedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathLastChangedTime indicates the last time, since system startup, that a writable object in this table was modified." ::= { vRtrMplsTpLspPathEntry 3 } vRtrMplsTpLspPathAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathAdminState specifies the administrative state of the MPLS-TP LSP Path." DEFVAL { outOfService } ::= { vRtrMplsTpLspPathEntry 4 } vRtrMplsTpLspPathOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathOperState indicates the operational state of the MPLS-TP LSP Path." ::= { vRtrMplsTpLspPathEntry 5 } vRtrMplsTpLspPathReasonDownFlags OBJECT-TYPE SYNTAX BITS { unknown (0), ccFault (1), cvFault (2), ifDn (3), portDn (4), parentAdminDn (5), mepAdminDn (6), unsupportedPort (7), ifNhAddrInconsistent (8), ptcTmplMsng (9), ccDnHold (10), ccUpHold (11), bfdNoRsrc (12), rxLDI (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathReasonDownFlags indicates the reason why the MPLS-TP LSP Path is operationally down when the administrative state is 'inService (2)'. The recognized BIT values are: unknown (0) - Unspecified (or unknown) ccFault (1) - BFD Continuity Check (CC) failed cvFault (2) - BFD Connectivity Verification (CV) failed ifDn (3) - The path out-link interface is operationally down portDn (4) - The port associated with the out-link interface is operationally down parentAdminDn (5) - The associated mpls-tp Lsp or mpls-tp instance or mpls instance is admin down mepAdminDn (6) - The path MEP is admin down unsupportedPort (7) - MPLS-TP functionality is not supported over the out-link port. ifNhAddrInconsistent (8) - The configured next-hop address is not bound to the configured out-link interface. ptcTmplMsng (9) - The protect-tp-path is missing a protection-template name. ccDnHold (10) - ccFault effect on path-state is on hold due to 'hold-time-down' config in the oam-template ccUpHold (11) - ccFault clear effect on path-state is on hold due to 'hold-time-up' config in the oam-template bfdNoRsrc (12) - bfd-enable failed since maximum number of supported bfd-sessions was reached rxLDI (13) - received LDI (Link Down Indication) from an LSR with vRtrMplsTpLspPathMepAisLsrGlbId, and vRtrMplsTpLspPathMepAisLsrNodeId for vRtrMplsTpLspPathMepAisLsrIfNum " ::= { vRtrMplsTpLspPathEntry 6 } vRtrMplsTpLspPathLspNumber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathLspNumber specifies the MPLS-TP LSP Path number. The default value of this object is dependent on the value of vRtrMplsTpLspPathIndex. If this object refers to a 'working (1)' path, then the default value is one (1). If this object refers to a 'protecting (2)' path, then the default value is two (2)." REFERENCE "RFC 6370 Section 5.2" ::= { vRtrMplsTpLspPathEntry 7 } vRtrMplsTpLspPathInLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathInLabel specifies the LSP ingress Label used by the MPLS-TP LSP Path. Once this object is set, to remove the in-label, one must destroy and recreate the vRtrMplsTpLspPathEntry." DEFVAL { 0 } ::= { vRtrMplsTpLspPathEntry 8 } vRtrMplsTpLspPathOutLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathOutLabel specifies the LSP egress Label used by the MPLS-TP LSP Path. Once this object is set, to remove the out-label, one must destroy and recreate the vRtrMplsTpLspPathEntry." DEFVAL { 0 } ::= { vRtrMplsTpLspPathEntry 9 } vRtrMplsTpLspPathOutLink OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathOutLink specifies the LSP out-link interface used by the MPLS-TP LSP Path. Once this object is set, to remove the out-link, one must destroy and recreate the vRtrMplsTpLspPathEntry." DEFVAL { 0 } ::= { vRtrMplsTpLspPathEntry 10 } vRtrMplsTpLspPathNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathNextHopAddrType, along with vRtrMplsTpLspPathNextHopAddress, specifies the IP address used as the next hop for the MPLS-TP LSP Path. Once this object is set, to remove the next hop, one must destroy and recreate the vRtrMplsTpLspPathEntry. This object is only applicable if the vRtrMplsTpLspPathOutLink references a numbered interface." DEFVAL { unknown } ::= { vRtrMplsTpLspPathEntry 11 } vRtrMplsTpLspPathNextHopAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathNextHopAddress, along with vRtrMplsTpLspPathNextHopAddrType, specifies the IP address used as the next hop for the MPLS-TP LSP Path. Once this object is set, to remove the next hop, one must destroy and recreate the vRtrMplsTpLspPathEntry. This object is only applicable if the vRtrMplsTpLspPathOutLink references a numbered interface." DEFVAL { "" } ::= { vRtrMplsTpLspPathEntry 12 } vRtrMplsTpLspPathState OBJECT-TYPE SYNTAX INTEGER { unknown (1), active (2), inactive (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathState indicates the current working state of the MPLS-TP LSP Path." DEFVAL { unknown } ::= { vRtrMplsTpLspPathEntry 13 } vRtrMplsTpLspPathTimeUp OBJECT-TYPE SYNTAX TimeInterval UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathTimeUp indicates the time that this MPLS-TP LSP path has been operational." ::= { vRtrMplsTpLspPathEntry 14 } vRtrMplsTpLspPathTimeDown OBJECT-TYPE SYNTAX TimeInterval UNITS "centiseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathTimeDown indicates the time that this MPLS-TP LSP Path has not been operational." ::= { vRtrMplsTpLspPathEntry 15 } vRtrMplsTpLspPathActiveTimeUp OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathActiveTimeUp indicates the time that this MPLS-TP LSP Path has been active." ::= { vRtrMplsTpLspPathEntry 16 } vRtrMplsTpLspPathMepTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLspPathMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathMepTable maintains the Maintenance End Points (MEPs) for the MPLS-TP LSP path." ::= { vRtrMplsTpLspObjects 3 } vRtrMplsTpLspPathMepEntry OBJECT-TYPE SYNTAX VRtrMplsTpLspPathMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a MPLS-TP LSP Path." INDEX { vRtrID, vRtrMplsLspIndex, vRtrMplsTpLspPathIndex } ::= { vRtrMplsTpLspPathMepTable 1 } VRtrMplsTpLspPathMepEntry ::= SEQUENCE { vRtrMplsTpLspPathMepLastChgTime TimeStamp, vRtrMplsTpLspPathMepRowStatus RowStatus, vRtrMplsTpLspPathMepAdminState TmnxAdminState, vRtrMplsTpLspPathMepProtectTmpl TNamedItemOrEmpty, vRtrMplsTpLspPathMepOamTmpl TNamedItemOrEmpty, vRtrMplsTpLspPathMepBfdEnabled INTEGER, vRtrMplsTpLspPathMepBfdOperState TmnxOperState, vRtrMplsTpLspPathMepDSInIfNum Unsigned32, vRtrMplsTpLspPathMepDSOutIfNum Unsigned32, vRtrMplsTpLspPathMepSupBfdNotif TruthValue } vRtrMplsTpLspPathMepLastChgTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepLastChgTime indicates the time, since system startup, when a columnar object for the specified row last changed state." ::= { vRtrMplsTpLspPathMepEntry 1 } vRtrMplsTpLspPathMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepRowStatus specifies the row status of the vRtrMplsTpLspPathMepEntry." ::= { vRtrMplsTpLspPathMepEntry 2 } vRtrMplsTpLspPathMepAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepAdminState specifies the administrative state of the MPLS-TP LSP path." DEFVAL { outOfService } ::= { vRtrMplsTpLspPathMepEntry 3 } vRtrMplsTpLspPathMepProtectTmpl OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepProtectTmpl specifies the associated vRtrMplsTpPtcTemplateCfgEntry to this MPLS-TP LSP Path MEP. This object is only meaningful to the row indexed with the vRtrMplsTpLspPathIndex value of 'protecting'. Attempts to configure this object, otherwise, will result in an 'inconsistentValue' error." DEFVAL { "" } ::= { vRtrMplsTpLspPathMepEntry 4 } vRtrMplsTpLspPathMepOamTmpl OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepOamTmpl specifies the associated vRtrMplsTpOamTemplateCfgEntry to this MPLS-TP LSP Path MEP." DEFVAL { "" } ::= { vRtrMplsTpLspPathMepEntry 5 } vRtrMplsTpLspPathMepBfdEnabled OBJECT-TYPE SYNTAX INTEGER { disabled (0), cc (1), ccCv (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepBfdEnabled specifies whether BFD is enabled or not. If set to 'disabled (0)', BFD is not enabled. If set to 'cc (1)', BFD is enabled with Continuity Check (CC) functionality. If set to 'ccCv (2)', BFD is enabled with both CC and Connectivity Verification (CV) functionality. In this mode, BFD will detect mis-connectivity as described in RFC 6428 Section 3.7.2. Once enabled, a modification to this object will effect the BFD session." REFERENCE "RFC 6428" DEFVAL { disabled } ::= { vRtrMplsTpLspPathMepEntry 6 } vRtrMplsTpLspPathMepBfdOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepBfdOperState indicates the operational state of the BFD session. The operational state of 'unknown (1)' indicates that the BFD session is not enabled." ::= { vRtrMplsTpLspPathMepEntry 7 } vRtrMplsTpLspPathMepDSInIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepDSInIfNum specifies the ingress interface number in order to provide an identifier for the LSP-Trace DSMAP/DDMAP when an IP identifier is not available. The value of zero (0) disables this object." DEFVAL { 0 } ::= { vRtrMplsTpLspPathMepEntry 8 } vRtrMplsTpLspPathMepDSOutIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepDSOutIfNum specifies the egress interface number in order to provide an identifier for the LSP-Trace DSMAP/DDMAP when an IP identifier is not available. The value of zero (0) disables this object. This value may only be changed away from the default value if a non-zero value is specified for the object vRtrMplsTpLspPathMepDSInIfNum, otherwise an error of inconsistentValue is returned." DEFVAL { 0 } ::= { vRtrMplsTpLspPathMepEntry 9 } vRtrMplsTpLspPathMepSupBfdNotif OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepSupBfdNotif specifies whether or not the associated up and down BFD session notifications (tmnxVRtrNgBfdSessUp and tmnxVRtrNgBfdSessDown) are suppressed." DEFVAL { false } ::= { vRtrMplsTpLspPathMepEntry 10 } vRtrMplsTpLspPtPathMepStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLspPtPathMepStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPtPathMepStatTable maintains the Maintenance End Points (MEPs) statistics for MPLS-TP LSP protection paths." ::= { vRtrMplsTpLspObjects 4 } vRtrMplsTpLspPtPathMepStatEntry OBJECT-TYPE SYNTAX VRtrMplsTpLspPtPathMepStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathMepEntry represents a Maintenance Endpoint for a MPLS-TP LSP protection Path. Rows are created and destroyed by the system based on the configuration of the MEP protection-type." INDEX { vRtrID, vRtrMplsLspIndex, vRtrMplsTpLspPathIndex } ::= { vRtrMplsTpLspPtPathMepStatTable 1 } VRtrMplsTpLspPtPathMepStatEntry ::= SEQUENCE { vRtrMplsTpLspPtPathMepRxPdu VRtrMplsTpLspPathMepPduType, vRtrMplsTpLspPtPathMepTxPdu VRtrMplsTpLspPathMepPduType, vRtrMplsTpLspPtPathMepDefects BITS, vRtrMplsTpLspPtPathMepWTRTimer Counter32 } vRtrMplsTpLspPtPathMepRxPdu OBJECT-TYPE SYNTAX VRtrMplsTpLspPathMepPduType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPtPathMepRxPdu indicates the last received PSC PDU APS format. The value of this object compared to that of vRtrMplsTpLspPtPathMepTxPdu will indicate a configuration mismatch between the local and far-end node." ::= { vRtrMplsTpLspPtPathMepStatEntry 1 } vRtrMplsTpLspPtPathMepTxPdu OBJECT-TYPE SYNTAX VRtrMplsTpLspPathMepPduType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPtPathMepTxPdu indicates the last transmitted PSC PDU APS format. The value of this object compared to that of vRtrMplsTpLspPtPathMepRxPdu will indicate a configuration mismatch between the local and far-end node." ::= { vRtrMplsTpLspPtPathMepStatEntry 2 } vRtrMplsTpLspPtPathMepDefects OBJECT-TYPE SYNTAX BITS { protectionTypeMismatch (0), revertModeMismatch (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPtPathMepDefects indicates the defect state of the protection path MEP. The defects monitored by this object are as follows: - protectionTypeMismatch (0) - A protection-type mismatch is detected. - revertModeMismatch (1) - A revertive mode mismatch is detected." ::= { vRtrMplsTpLspPtPathMepStatEntry 3 } vRtrMplsTpLspPtPathMepWTRTimer OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPtPathMepWTRTimer indicates the remaining Wait-To-Restore time, in seconds, before the protection path can switch back to the working path. A value of zero (0) indicates that there is no WTR timer in effect." ::= { vRtrMplsTpLspPtPathMepStatEntry 4 } vRtrMplsTpLspPathMepStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLspPathMepStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathMepStatTable maintains the status and statistic objects for Maintenance End Points (MEPs) of the MPLS-TP LSP path." ::= { vRtrMplsTpLspObjects 5 } vRtrMplsTpLspPathMepStatEntry OBJECT-TYPE SYNTAX VRtrMplsTpLspPathMepStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLspPathMepStatEntry represents status and statistics information for a Maintenance Endpoint of a MPLS-TP LSP path." AUGMENTS { vRtrMplsTpLspPathMepEntry } ::= { vRtrMplsTpLspPathMepStatTable 1 } VRtrMplsTpLspPathMepStatEntry ::= SEQUENCE { vRtrMplsTpLspPathMepAisLsrGlbId TmnxMplsTpGlobalID, vRtrMplsTpLspPathMepAisLsrNodeId TmnxMplsTpNodeID, vRtrMplsTpLspPathMepAisLsrIfNum Unsigned32 } vRtrMplsTpLspPathMepAisLsrGlbId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepAisLsrGlbId indicates the LSR global identifier determined via AIS on the MPLS-TP LSP path." ::= { vRtrMplsTpLspPathMepStatEntry 1 } vRtrMplsTpLspPathMepAisLsrNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepAisLsrNodeId indicates the LSR node identifier determined via AIS on the MPLS-TP LSP path." ::= { vRtrMplsTpLspPathMepStatEntry 2 } vRtrMplsTpLspPathMepAisLsrIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLspPathMepAisLsrIfNum indicates the LSR interface number determined via AIS on the MPLS-TP LSP path." ::= { vRtrMplsTpLspPathMepStatEntry 3 } vRtrMplsTpCmdObjects OBJECT IDENTIFIER ::= { vRtrMplsTpConfigurations 4 } vRtrMplsTpTunnelCommandTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpTunnelCommandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpTunnelCommandTable maintains the one-shot action commands that effect the state of the MPLS-TP operation." REFERENCE "RFC 6378" ::= { vRtrMplsTpCmdObjects 1 } vRtrMplsTpTunnelCommandEntry OBJECT-TYPE SYNTAX VRtrMplsTpTunnelCommandEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpTunnelCommandEntry contains the command available to execute on an existing MPLS-TP Tunnel. Rows in this table are created and destroyed by the system." INDEX { vRtrID, vRtrMplsLspIndex } ::= { vRtrMplsTpTunnelCommandTable 1 } VRtrMplsTpTunnelCommandEntry ::= SEQUENCE { vRtrMplsTpTunnelCommandSwitch INTEGER } vRtrMplsTpTunnelCommandSwitch OBJECT-TYPE SYNTAX INTEGER { noCmd (0), clear (1), forceSwitch (2), manualSwitch (3), lockout (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value vRtrMplsTpTunnelCommandSwitch specifies the switch command to initiate on a MPLS-TP LSP Tunnel. When read, this object returns the last command written or 'noCmd (0)' if no command has been written to this MPLS-TP LSP Tunnel since initialization. The return of the last command written does not imply that this command is currently in effect. This request may be preempted by a higher priority local or remote request. The value 'noCmd (0)' may not be used in a write command. The value 'clear (1)' clears all the switch commands listed below for the specified LSP. The value of 'forceSwitch (2)' switches the active path to the protection path. The value of 'manualSwitch (3)' switches the active path to the protection path. The value of 'lockout (4)' prevents the working path from switching to the protection path." DEFVAL { noCmd } ::= { vRtrMplsTpTunnelCommandEntry 1 } vRtrMplsTpLsrObjects OBJECT IDENTIFIER ::= { vRtrMplsTpConfigurations 5 } vRtrMplsTpLsrCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLsrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLsrCfgTable maintains the MPLS-TP LSR configuration information." ::= { vRtrMplsTpLsrObjects 1 } vRtrMplsTpLsrCfgEntry OBJECT-TYPE SYNTAX VRtrMplsTpLsrCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLsrCfgEntry contains the configuration items maintained by the vRtrMplsTpLsrCfgTable." INDEX { vRtrID, IMPLIED vRtrMplsTpLsrPathName } ::= { vRtrMplsTpLsrCfgTable 1 } VRtrMplsTpLsrCfgEntry ::= SEQUENCE { vRtrMplsTpLsrPathName TNamedItem, vRtrMplsTpLsrRowStatus RowStatus, vRtrMplsTpLsrLastChangedTime TimeStamp, vRtrMplsTpLsrAdminState TmnxAdminState, vRtrMplsTpLsrOperState TmnxOperState, vRtrMplsTpLsrFPInLabel Unsigned32, vRtrMplsTpLsrFPOutLabel Unsigned32, vRtrMplsTpLsrFPOutLink InterfaceIndexOrZero, vRtrMplsTpLsrFPNextHopAddrType InetAddressType, vRtrMplsTpLsrFPNextHopAddress InetAddress, vRtrMplsTpLsrRPInLabel Unsigned32, vRtrMplsTpLsrRPOutLabel Unsigned32, vRtrMplsTpLsrRPOutLink InterfaceIndexOrZero, vRtrMplsTpLsrRPNextHopAddrType InetAddressType, vRtrMplsTpLsrRPNextHopAddress InetAddress, vRtrMplsTpLsrFPEnabled TruthValue, vRtrMplsTpLsrRPEnabled TruthValue } vRtrMplsTpLsrPathName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathName specifies the unique name of the MPLS-TP LSR Path." ::= { vRtrMplsTpLsrCfgEntry 1 } vRtrMplsTpLsrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRowStatus specifies the row status of the MPLS-TP LSR configuration entry. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the value 'destroy (6)'." ::= { vRtrMplsTpLsrCfgEntry 2 } vRtrMplsTpLsrLastChangedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLsrLastChangedTime indicates the time, since system startup, that a columnar object in the MPLS-TP LSR entry last changed state." ::= { vRtrMplsTpLsrCfgEntry 3 } vRtrMplsTpLsrAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrAdminState specifies the administrative state of the MPLS-TP LSR." DEFVAL { outOfService } ::= { vRtrMplsTpLsrCfgEntry 4 } vRtrMplsTpLsrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLsrOperState indicates the operational state of the MPLS-TP LSR." ::= { vRtrMplsTpLsrCfgEntry 5 } vRtrMplsTpLsrFPInLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrFPInLabel specifies the forward path (FP) ingress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. Once this object is set, the value may not be unset. To remove the ingress label one must set vRtrMplsTpLsrFPEnabled to 'false'." DEFVAL { 0 } ::= { vRtrMplsTpLsrCfgEntry 6 } vRtrMplsTpLsrFPOutLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrFPOutLabel specifies the forward path (FP) egress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. Once this object is set, the value may not be unset. To remove the egress label one must set vRtrMplsTpLsrFPEnabled to 'false'." DEFVAL { 0 } ::= { vRtrMplsTpLsrCfgEntry 7 } vRtrMplsTpLsrFPOutLink OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrFPOutLink specifies the forward path (FP) out-link interface used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. Once this object is set, the value may not be unset. To remove the out-link, one must set vRtrMplsTpLsrFPEnabled to 'false'." DEFVAL { 0 } ::= { vRtrMplsTpLsrCfgEntry 8 } vRtrMplsTpLsrFPNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrFPNextHopAddrType, along with vRtrMplsTpLsrFPNextHopAddress, specifies the forward path (FP) IP address used as the next hop for the MPLS-TP LSP Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. Once this object is set, the value may not be unset. To remove the next hop, one must set vRtrMplsTpLsrFPEnabled to 'false'. This object is only applicable if the vRtrMplsTpLsrFPOutLink references a numbered interface." DEFVAL { unknown } ::= { vRtrMplsTpLsrCfgEntry 9 } vRtrMplsTpLsrFPNextHopAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrFPNextHopAddress, along with vRtrMplsTpLsrFPNextHopAddrType, specifies the forward path (FP) IP address used as the next hop for the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrFPEnabled is set to 'true'. Once this object is set, the value may not be unset. To remove the next hop, one must set vRtrMplsTpLsrFPEnabled to 'false'. This object is only applicable if the vRtrMplsTpLsrFPOutLink references a numbered interface." DEFVAL { "" } ::= { vRtrMplsTpLsrCfgEntry 10 } vRtrMplsTpLsrRPInLabel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRPInLabel specifies the reverse path (RP) LSP ingress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. Once this object is set, the value may not be unset. To remove the ingress label, one must set vRtrMplsTpLsrRPEnabled to 'false'." DEFVAL { 0 } ::= { vRtrMplsTpLsrCfgEntry 11 } vRtrMplsTpLsrRPOutLabel OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..1048575) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRPOutLabel specifies the reverse path (RP) LSP egress label used by the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. Once this object is set, this value may not be unset. To remove the egress label, one must set vRtrMplsTpLsrFPEnabled to 'false'." DEFVAL { 0 } ::= { vRtrMplsTpLsrCfgEntry 12 } vRtrMplsTpLsrRPOutLink OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRPOutLink specifies the reverse path (RP) LSP out-link interface used by the MPLS-TP LSP Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. Once this object is set, this value may not be unset. To remove the out-link, one must set vRtrMplsTpLsrRPEnabled to 'false'." DEFVAL { 0 } ::= { vRtrMplsTpLsrCfgEntry 13 } vRtrMplsTpLsrRPNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRPNextHopAddrType, along with vRtrMplsTpLsrRPNextHopAddress, specifies the reverse path (RP) IP address used as the next hop for the MPLS-TP LSP Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. Once this object is set, this value may not be unset. To remove the next hop, one must set vRtrMplsTpLsrRPEnabled to 'false'. This object is only applicable if the vRtrMplsTpLsrRPOutLink references a numbered interface." DEFVAL { unknown } ::= { vRtrMplsTpLsrCfgEntry 14 } vRtrMplsTpLsrRPNextHopAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRPNextHopAddress, along with vRtrMplsTpLsrRPNextHopAddrType, specifies the reverse path (RP) IP address used as the next hop for the MPLS-TP LSR Path. This object can be set only after vRtrMplsTpLsrRPEnabled is set to 'true'. Once this object is set, this value may not be unset. To remove the next hop, one must set vRtrMplsTpLsrRPEnabled to 'false'. This object is only applicable if the vRtrMplsTpLsrRPOutLink references a numbered interface." DEFVAL { "" } ::= { vRtrMplsTpLsrCfgEntry 15 } vRtrMplsTpLsrFPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrFPEnabled specifies whether the forward path is configured for the LSR path." DEFVAL { false } ::= { vRtrMplsTpLsrCfgEntry 16 } vRtrMplsTpLsrRPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrRPEnabled specifies whether the reverse path is configured for the LSR path." DEFVAL { false } ::= { vRtrMplsTpLsrCfgEntry 17 } vRtrMplsTpLsrPathIdTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLsrPathIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLsrPathIdTable maintains the MPLS-TP LSR Path configuration information." ::= { vRtrMplsTpLsrObjects 3 } vRtrMplsTpLsrPathIdEntry OBJECT-TYPE SYNTAX VRtrMplsTpLsrPathIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLsrPathIdEntry contains the configuration items maintained by the vRtrMplsTpLsrPathIdTable." INDEX { vRtrID, vRtrMplsTpLsrPathIdSrcGlobalId, vRtrMplsTpLsrPathIdSrcNodeId, vRtrMplsTpLsrPathIdSrcTunNum, vRtrMplsTpLsrPathIdDestGlobalId, vRtrMplsTpLsrPathIdDestNodeId, vRtrMplsTpLsrPathIdDestTunNum, vRtrMplsTpLsrPathIdLspNumber } ::= { vRtrMplsTpLsrPathIdTable 1 } VRtrMplsTpLsrPathIdEntry ::= SEQUENCE { vRtrMplsTpLsrPathIdSrcGlobalId TmnxMplsTpGlobalID, vRtrMplsTpLsrPathIdSrcNodeId TmnxMplsTpNodeID, vRtrMplsTpLsrPathIdSrcTunNum Unsigned32, vRtrMplsTpLsrPathIdDestGlobalId TmnxMplsTpGlobalID, vRtrMplsTpLsrPathIdDestNodeId TmnxMplsTpNodeID, vRtrMplsTpLsrPathIdDestTunNum Unsigned32, vRtrMplsTpLsrPathIdLspNumber Unsigned32, vRtrMplsTpLsrPathIdRowStatus RowStatus, vRtrMplsTpLsrPathIdPathName TNamedItem } vRtrMplsTpLsrPathIdSrcGlobalId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdSrcGlobalId specifies the unique node identifier for the given source global ID." ::= { vRtrMplsTpLsrPathIdEntry 1 } vRtrMplsTpLsrPathIdSrcNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdSrcNodeId specifies the unique node identifier for the given source node ID." ::= { vRtrMplsTpLsrPathIdEntry 2 } vRtrMplsTpLsrPathIdSrcTunNum OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..61440) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdSrcTunNum specifies the source tunnel number of an MPLS-TP Static LSP." ::= { vRtrMplsTpLsrPathIdEntry 3 } vRtrMplsTpLsrPathIdDestGlobalId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdDestGlobalId specifies the unique node identifier for the given remote global ID." ::= { vRtrMplsTpLsrPathIdEntry 4 } vRtrMplsTpLsrPathIdDestNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdDestNodeId specifies the unique node identifier for the given remote node ID." ::= { vRtrMplsTpLsrPathIdEntry 5 } vRtrMplsTpLsrPathIdDestTunNum OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..61440) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdDestTunNum specifies the destination tunnel number of an MPLS-TP Static LSP." ::= { vRtrMplsTpLsrPathIdEntry 6 } vRtrMplsTpLsrPathIdLspNumber OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdLspNumber specifies the MPLS-TP LSP Path number." REFERENCE "RFC 6370 Section 5.2" ::= { vRtrMplsTpLsrPathIdEntry 7 } vRtrMplsTpLsrPathIdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdRowStatus specifies the row status of the MPLS-TP LSR Path. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the value 'destroy (6)'." ::= { vRtrMplsTpLsrPathIdEntry 8 } vRtrMplsTpLsrPathIdPathName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrPathIdPathName specifies the unique name of the MPLS-TP LSR Path. This object MUST be specified on row creation, and must reference an existing vRtrMplsTpLsrPathName." ::= { vRtrMplsTpLsrPathIdEntry 9 } vRtrMplsTpLsrMipCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpLsrMipCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLsrMipCfgTable maintains the MPLS-TP LSR Path MIP configuration information." ::= { vRtrMplsTpLsrObjects 4 } vRtrMplsTpLsrMipCfgEntry OBJECT-TYPE SYNTAX VRtrMplsTpLsrMipCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpLsrMipCfgEntry contains the configuration items maintained by the vRtrMplsTpLsrMipCfgTable." INDEX { vRtrID, vRtrMplsTpLsrPathName, vRtrMplsTpLsrMipDirection } ::= { vRtrMplsTpLsrMipCfgTable 1 } VRtrMplsTpLsrMipCfgEntry ::= SEQUENCE { vRtrMplsTpLsrMipDirection INTEGER, vRtrMplsTpLsrMipRowStatus RowStatus, vRtrMplsTpLsrMipLastChanged TimeStamp, vRtrMplsTpLsrMipDSInIfNum Unsigned32, vRtrMplsTpLsrMipDSOutIfNum Unsigned32 } vRtrMplsTpLsrMipDirection OBJECT-TYPE SYNTAX INTEGER { forward (1), reverse (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpLsrMipDirection specifies the direction of the LSR path." ::= { vRtrMplsTpLsrMipCfgEntry 1 } vRtrMplsTpLsrMipRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrMipRowStatus specifies the row status of the MPLS-TP LSR MIP. Rows are created by setting this object to the value 'createAndGo (4)' and are destroyed by using the value 'destroy (6)'." ::= { vRtrMplsTpLsrMipCfgEntry 2 } vRtrMplsTpLsrMipLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpLsrMipLastChanged indicates the last time, since system startup, that a columnar object in this row has changed state." ::= { vRtrMplsTpLsrMipCfgEntry 3 } vRtrMplsTpLsrMipDSInIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrMipDSInIfNum specifies the ingress interface number in order to provide an identifier for the LSP-Trace DSMAP/DDMAP when an IP identifier is not available. The value of zero (0) disables this object." DEFVAL { 0 } ::= { vRtrMplsTpLsrMipCfgEntry 4 } vRtrMplsTpLsrMipDSOutIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpLsrMipDSOutIfNum specifies the egress interface number in order to provide an identifier for the LSP-Trace DSMAP/DDMAP when an IP identifier is not available. The value of zero (0) disables this object. This value may only be changed away from the default value if a non-zero value is specified for the object vRtrMplsTpLsrMipDSInIfNum, otherwise an error of inconsistentValue is returned." DEFVAL { 0 } ::= { vRtrMplsTpLsrMipCfgEntry 5 } vRtrMplsTpInterfaceObjects OBJECT IDENTIFIER ::= { vRtrMplsTpConfigurations 6 } vRtrMplsTpIfCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpIfCfgTable maintains the MPLS-TP Interface configuration information." ::= { vRtrMplsTpInterfaceObjects 1 } vRtrMplsTpIfCfgEntry OBJECT-TYPE SYNTAX VRtrMplsTpIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMplsTpIfCfgEntry contains the configuration items maintained by the vRtrMplsTpIfCfgTable. A row may be created or destroyed on entries found in the vRtrMplsIfTable. MPLS-TP must be enabled for the creation of rows in this table." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrMplsTpIfCfgTable 1 } VRtrMplsTpIfCfgEntry ::= SEQUENCE { vRtrMplsTpIfRowStatus RowStatus, vRtrMplsTpIfLastChanged TimeStamp, vRtrMplsTpIfNum Unsigned32, vRtrMplsTpIfNumValidation TmnxEnabledDisabled, vRtrMplsTpIfAisEnable TruthValue } vRtrMplsTpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpIfRowStatus specifies the row status of this row. MPLS-TP Interface configuration is added or removed from MPLS Interfaces through the setting of this object." ::= { vRtrMplsTpIfCfgEntry 1 } vRtrMplsTpIfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpIfLastChanged indicates the last time, since system startup, that an object in this row changed state." ::= { vRtrMplsTpIfCfgEntry 2 } vRtrMplsTpIfNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpIfNum specifies the system unique value associated to the MPLS interface. The value zero (0) indicates that the if-num has not been specified for this entry." REFERENCE "RFC 6370 section 4 Node and Interface Identifiers" DEFVAL { 0 } ::= { vRtrMplsTpIfCfgEntry 3 } vRtrMplsTpIfNumValidation OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpIfNumValidation specifies whether or not the node will perform the validation of vRtrMplsTpIfNum. If the value of vRtrMplsTpIfNumValidation is 'enabled (1)', the node performs the validation of the ingress and egress if-nums received in the LSP echo request messages that ingress on this MPLS interface. It validates that the message arrives on the interface as identified by the ingress if-num, and is forwarded on the interface as identified by the egress if-num. If the value of vRtrMplsTpIfNumValidation is 'disabled (2)', no validation is performed for the ingress and egress if-nums received in the LSP echo request messages that ingress on this MPLS interface." DEFVAL { enabled } ::= { vRtrMplsTpIfCfgEntry 4 } vRtrMplsTpIfAisEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMplsTpIfAisEnable specifies whether or not the Alarm Indication Signal (AIS) is enabled on this MPLS-TP interface." DEFVAL { false } ::= { vRtrMplsTpIfCfgEntry 5 } vRtrMplsTpStatus OBJECT IDENTIFIER ::= { vRtrMplsTpObjs 3 } vRtrMplsTpStatusObjects OBJECT IDENTIFIER ::= { vRtrMplsTpStatus 1 } vRtrMplsTpTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMplsTpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsTpTunnelTable maintains a list of MPLS-TP tunnels for the specific router instance." ::= { vRtrMplsTpStatusObjects 1 } vRtrMplsTpTunnelEntry OBJECT-TYPE SYNTAX VRtrMplsTpTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsTpTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination is an MPLS-TP Static LSP." INDEX { vRtrID, vRtrMplsTpTunnelNodeId, vRtrMplsTpTunnelGlobalId, vRtrMplsTpTunnelPreference, vRtrMplsTpTunnelType, vRtrMplsTpTunnelID, vRtrMplsTpTunnelNextHopAddrType, vRtrMplsTpTunnelNextHopAddress } ::= { vRtrMplsTpTunnelTable 1 } VRtrMplsTpTunnelEntry ::= SEQUENCE { vRtrMplsTpTunnelNodeId TmnxMplsTpNodeID, vRtrMplsTpTunnelGlobalId TmnxMplsTpGlobalID, vRtrMplsTpTunnelPreference Unsigned32, vRtrMplsTpTunnelType TmnxMplsTpTunnelType, vRtrMplsTpTunnelID TmnxTunnelID, vRtrMplsTpTunnelNextHopAddrType InetAddressType, vRtrMplsTpTunnelNextHopAddress InetAddress, vRtrMplsTpTunnelMetric Unsigned32, vRtrMplsTpTunnelAge Integer32 } vRtrMplsTpTunnelNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsTpTunnelNodeId indicates the destination node id of this tunnel." ::= { vRtrMplsTpTunnelEntry 1 } vRtrMplsTpTunnelGlobalId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrMplsTpTunnelGlobalId indicates the global id of the system." ::= { vRtrMplsTpTunnelEntry 2 } vRtrMplsTpTunnelPreference OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources. This is an absolute number used internally by the system to specify preferences for the tunnel. The lowest number signifies the most preferred entry in the table." ::= { vRtrMplsTpTunnelEntry 3 } vRtrMplsTpTunnelType OBJECT-TYPE SYNTAX TmnxMplsTpTunnelType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelType indicates the type of this tunnel entity." ::= { vRtrMplsTpTunnelEntry 4 } vRtrMplsTpTunnelID OBJECT-TYPE SYNTAX TmnxTunnelID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelID provides an additional index to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'mplsTpStatic'. In such cases the vRtrMplsTpTunnelID will hold the specific MPLS-TP Static LSP Id." ::= { vRtrMplsTpTunnelEntry 5 } vRtrMplsTpTunnelNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelNextHopAddrType specifies the address type of vRtrMplsTpTunnelNextHopAddress." ::= { vRtrMplsTpTunnelEntry 6 } vRtrMplsTpTunnelNextHopAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelNextHopAddress specifies the ip address of the next hop for the MPLS-TP tunnel and it depends on the value of vRtrMplsTpTunnelNextHopAddrType." ::= { vRtrMplsTpTunnelEntry 7 } vRtrMplsTpTunnelMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelMetric indicates the metric of the tunnel. This is used in addition to the preference for this tunnel." ::= { vRtrMplsTpTunnelEntry 8 } vRtrMplsTpTunnelAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMplsTpTunnelAge indicates the number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of 'too old' can be implied except through knowledge of owner of the tunnel." ::= { vRtrMplsTpTunnelEntry 9 } vRtrMplsTpStatistics OBJECT IDENTIFIER ::= { vRtrMplsTpObjs 5 } vRtrMplsTpActions OBJECT IDENTIFIER ::= { vRtrMplsTpObjs 6 } vRtrMplsTpNotifyObjects OBJECT IDENTIFIER ::= { vRtrMplsTpObjs 10 } vRtrMplsTpLspOldPathIndex OBJECT-TYPE SYNTAX INTEGER { working (1), protecting (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrMplsTpLspOldPathIndex indicates the path index of of the old MPLS-TP path." ::= { vRtrMplsTpNotifyObjects 1 } vRtrMplsTpConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 83 } vRtrMplsTpCompliances OBJECT IDENTIFIER ::= { vRtrMplsTpConformance 1 } vRtrMplsTpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the management of the MPLS-TP feature for release 11.0 on SROS series systems." MODULE MANDATORY-GROUPS { vRtrMplsTpTimeStampGroup, vRtrMplsTpSystemGroup, vRtrMplsTpOamTemplateGroup, vRtrMplsTpProtectionTemplGroup, vRtrMplsTpLspPathGroup, vRtrMplsTpLspPathMepGroup, vRtrMplsTpTunnelCommandGroup, vRtrMplsTpTunnelTableGroup, vRtrMplsTpLsrCfgGroup, vRtrMplsTpLsrPathIdGroup, vRtrMplsTpNotificationGroup, vRtrMplsTpNotifyObjsGroup } ::= { vRtrMplsTpCompliances 1 } vRtrMplsTpV12v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement of additional groups added in release 12.0 for the management of the MPLS-TP feature on SROS series systems." MODULE MANDATORY-GROUPS { vRtrMplsTpInterfaceGroup, vRtrMplsTpLsrMipGroup, vRtrMplsTpLspPathMepV12v0Group } ::= { vRtrMplsTpCompliances 2 } vRtrMplsTpV14v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement of additional groups added in release 14.0 for the management of the MPLS-TP feature on SROS series systems." MODULE MANDATORY-GROUPS { vRtrMplsTpInterfaceV14v0Group, vRtrMplsTpLspPathMepV14v0Group } ::= { vRtrMplsTpCompliances 3 } vRtrMplsTpGroups OBJECT IDENTIFIER ::= { vRtrMplsTpConformance 2 } vRtrMplsTpV11v0Groups OBJECT IDENTIFIER ::= { vRtrMplsTpGroups 1 } vRtrMplsTpTimeStampGroup OBJECT-GROUP OBJECTS { vRtrMplsTpSystemTableLastChanged, vRtrMplsTpOamTemplTblLastChanged, vRtrMplsTpPtcTemplTblLastChanged, vRtrMplsTpLspPathTblLastChanged, vRtrMplsTpLspPathMepTblLastChg, vRtrMplsTpLsrPathIdTblLastChg, vRtrMplsTpLsrTblLastChanged } STATUS current DESCRIPTION "The group of objects maintaining table statistics for MPLS-TP on the SROS series system." ::= { vRtrMplsTpV11v0Groups 1 } vRtrMplsTpSystemGroup OBJECT-GROUP OBJECTS { vRtrMplsTpRowStatus, vRtrMplsTpGlobalId, vRtrMplsTpNodeId, vRtrMplsTpTunnelIdMin, vRtrMplsTpTunnelIdMax, vRtrMplsTpAdminState, vRtrMplsTpInheritance } STATUS current DESCRIPTION "The group of objects maintaining system configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 2 } vRtrMplsTpOamTemplateGroup OBJECT-GROUP OBJECTS { vRtrMplsTpOamTmplRowStatus, vRtrMplsTpOamTmplLastChangedTime, vRtrMplsTpOamTmplBfdTemplateName, vRtrMplsTpOamTmplHoldTimeDown, vRtrMplsTpOamTmplHoldTimeUp } STATUS current DESCRIPTION "The group of objects maintaining the OAM template configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 3 } vRtrMplsTpProtectionTemplGroup OBJECT-GROUP OBJECTS { vRtrMplsTpPtcTmplRowStatus, vRtrMplsTpPtcTmplLastChangedTime, vRtrMplsTpPtcTmplProtectionMode, vRtrMplsTpPtcTmplProtectionDir, vRtrMplsTpPtcTmplRevertive, vRtrMplsTpPtcTmplWaitToRestore, vRtrMplsTpPtcTmplRapidPscTimer, vRtrMplsTpPtcTmplSlowPscTimer } STATUS current DESCRIPTION "The group of objects maintaining the Protection template configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 4 } vRtrMplsTpLspPathGroup OBJECT-GROUP OBJECTS { vRtrMplsTpLspPathRowStatus, vRtrMplsTpLspPathLastChangedTime, vRtrMplsTpLspPathAdminState, vRtrMplsTpLspPathOperState, vRtrMplsTpLspPathReasonDownFlags, vRtrMplsTpLspPathLspNumber, vRtrMplsTpLspPathInLabel, vRtrMplsTpLspPathOutLabel, vRtrMplsTpLspPathOutLink, vRtrMplsTpLspPathNextHopAddrType, vRtrMplsTpLspPathNextHopAddress, vRtrMplsTpLspPathState, vRtrMplsTpLspPathTimeUp, vRtrMplsTpLspPathTimeDown, vRtrMplsTpLspPathActiveTimeUp } STATUS current DESCRIPTION "The group of objects maintaining the LSP Path configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 5 } vRtrMplsTpLspPathMepGroup OBJECT-GROUP OBJECTS { vRtrMplsTpLspPathMepLastChgTime, vRtrMplsTpLspPathMepRowStatus, vRtrMplsTpLspPathMepAdminState, vRtrMplsTpLspPathMepProtectTmpl, vRtrMplsTpLspPathMepOamTmpl, vRtrMplsTpLspPathMepBfdEnabled, vRtrMplsTpLspPathMepBfdOperState, vRtrMplsTpLspPtPathMepRxPdu, vRtrMplsTpLspPtPathMepTxPdu, vRtrMplsTpLspPtPathMepDefects, vRtrMplsTpLspPtPathMepWTRTimer } STATUS current DESCRIPTION "The group of objects maintaining the LSP Path MEP configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 6 } vRtrMplsTpTunnelCommandGroup OBJECT-GROUP OBJECTS { vRtrMplsTpTunnelCommandSwitch } STATUS current DESCRIPTION "The group of objects supporting manual protection operations for MPLS-TP Tunnels on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 7 } vRtrMplsTpTunnelTableGroup OBJECT-GROUP OBJECTS { vRtrMplsTpTunnelMetric, vRtrMplsTpTunnelAge } STATUS current DESCRIPTION "The group of objects supporting manual protection operations for MPLS-TP Tunnels on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 8 } vRtrMplsTpLsrCfgGroup OBJECT-GROUP OBJECTS { vRtrMplsTpLsrRowStatus, vRtrMplsTpLsrLastChangedTime, vRtrMplsTpLsrAdminState, vRtrMplsTpLsrOperState, vRtrMplsTpLsrFPInLabel, vRtrMplsTpLsrFPOutLabel, vRtrMplsTpLsrFPOutLink, vRtrMplsTpLsrFPNextHopAddrType, vRtrMplsTpLsrFPNextHopAddress, vRtrMplsTpLsrRPInLabel, vRtrMplsTpLsrRPOutLabel, vRtrMplsTpLsrRPOutLink, vRtrMplsTpLsrRPNextHopAddrType, vRtrMplsTpLsrRPNextHopAddress, vRtrMplsTpLsrFPEnabled, vRtrMplsTpLsrRPEnabled } STATUS current DESCRIPTION "The group of objects maintaining the LSR configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 9 } vRtrMplsTpLsrPathIdGroup OBJECT-GROUP OBJECTS { vRtrMplsTpLsrPathIdRowStatus, vRtrMplsTpLsrPathIdPathName } STATUS current DESCRIPTION "The group of objects maintaining the LSR Path configuration for MPLS-TP on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 10 } vRtrMplsTpNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { vRtrMplsTpLspRevertMismatchAlarm, vRtrMplsTpLspRevertMismatchClear, vRtrMplsTpLspPtTypeMismatchAlarm, vRtrMplsTpLspPtTypeMismatchClear, vRtrMplsTpLspActivePathUp, vRtrMplsTpLspActivePathChange } STATUS current DESCRIPTION "The group of notifications reporting MPLS-TP state changes on the SROS series systems." ::= { vRtrMplsTpV11v0Groups 11 } vRtrMplsTpNotifyObjsGroup OBJECT-GROUP OBJECTS { vRtrMplsTpLspOldPathIndex } STATUS current DESCRIPTION "The group of notification objects supporting MPLS TP notifications on Nokia SROS series systems 11.0 release." ::= { vRtrMplsTpV11v0Groups 12 } vRtrMplsTpV12v0Groups OBJECT IDENTIFIER ::= { vRtrMplsTpGroups 2 } vRtrMplsTpInterfaceGroup OBJECT-GROUP OBJECTS { vRtrMplsTpIfTblLastChanged, vRtrMplsTpIfRowStatus, vRtrMplsTpIfLastChanged, vRtrMplsTpIfNum, vRtrMplsTpIfNumValidation } STATUS current DESCRIPTION "The group of additional objects introduced in release 12.0 for the management of MPLS-TP interfaces on Nokia SROS series systems." ::= { vRtrMplsTpV12v0Groups 1 } vRtrMplsTpLsrMipGroup OBJECT-GROUP OBJECTS { vRtrMplsTpLsrMipCfgTblLastChg, vRtrMplsTpLsrMipRowStatus, vRtrMplsTpLsrMipLastChanged, vRtrMplsTpLsrMipDSInIfNum, vRtrMplsTpLsrMipDSOutIfNum } STATUS current DESCRIPTION "The group of additional objects introduced in release 12.0 for the management of MPLS-TP LSR MIP (Maintenance Intermediate Points) on Nokia SROS series systems." ::= { vRtrMplsTpV12v0Groups 2 } vRtrMplsTpLspPathMepV12v0Group OBJECT-GROUP OBJECTS { vRtrMplsTpLspPathMepDSInIfNum, vRtrMplsTpLspPathMepDSOutIfNum } STATUS current DESCRIPTION "The group of additional objects introduced in release 12.0 for the management of MPLS-TP LSP Path MEP (Maintenance EndPoints) on Nokia SROS series systems." ::= { vRtrMplsTpV12v0Groups 3 } vRtrMplsTpV14v0Groups OBJECT IDENTIFIER ::= { vRtrMplsTpGroups 3 } vRtrMplsTpInterfaceV14v0Group OBJECT-GROUP OBJECTS { vRtrMplsTpIfAisEnable } STATUS current DESCRIPTION "The group of additional objects introduced in release 14.0 for the management of MPLS-TP interfaces on Nokia SROS series systems." ::= { vRtrMplsTpV14v0Groups 1 } vRtrMplsTpLspPathMepV14v0Group OBJECT-GROUP OBJECTS { vRtrMplsTpLspPathMepSupBfdNotif, vRtrMplsTpLspPathMepAisLsrGlbId, vRtrMplsTpLspPathMepAisLsrNodeId, vRtrMplsTpLspPathMepAisLsrIfNum } STATUS current DESCRIPTION "The group of additional objects introduced in release 14.0 for the management of MPLS-TP LSP Path MEP (Maintenance EndPoints) on Nokia SROS series systems." ::= { vRtrMplsTpV14v0Groups 2 } vRtrMplsTpNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 83 } vRtrMplsTpNotifications OBJECT IDENTIFIER ::= { vRtrMplsTpNotifyPrefix 0 } vRtrMplsTpLspRevertMismatchAlarm NOTIFICATION-TYPE OBJECTS { vRtrMplsTpLspPtPathMepRxPdu, vRtrMplsTpLspPtPathMepTxPdu } STATUS current DESCRIPTION "The vRtrMplsTpLspRevertMismatchAlarm is generated when an MPLS-TP LSP revertive mode mismatch is detected on the protection MEP, at the APS layer, by comparing the R bit of the transmitted and received APS protocol." REFERENCE "RFC 6378 Section 4.2" ::= { vRtrMplsTpNotifications 1 } vRtrMplsTpLspRevertMismatchClear NOTIFICATION-TYPE OBJECTS { vRtrMplsTpLspPtPathMepRxPdu, vRtrMplsTpLspPtPathMepTxPdu } STATUS current DESCRIPTION "The vRtrMplsTpLspRevertMismatchClear is generated when an MPLS-TP LSP revertive mode mismatch is cleared." REFERENCE "RFC 6378 Section 4.2" ::= { vRtrMplsTpNotifications 2 } vRtrMplsTpLspPtTypeMismatchAlarm NOTIFICATION-TYPE OBJECTS { vRtrMplsTpLspPtPathMepRxPdu, vRtrMplsTpLspPtPathMepTxPdu } STATUS current DESCRIPTION "The vRtrMplsTpLspPtTypeMismatchAlarm is generated when an MPLS-TP LSP protection type mismatch is detected on the protection MEP, at the APS layer, by comparing the PT bits of the transmitted and received APS protocol." REFERENCE "RFC 6378 Section 4.2" ::= { vRtrMplsTpNotifications 3 } vRtrMplsTpLspPtTypeMismatchClear NOTIFICATION-TYPE OBJECTS { vRtrMplsTpLspPtPathMepRxPdu, vRtrMplsTpLspPtPathMepTxPdu } STATUS current DESCRIPTION "The vRtrMplsTpLspPtTypeMismatchClear is generated when an MPLS-TP LSP protection type mismatch is cleared." REFERENCE "RFC 6378 Section 4.2" ::= { vRtrMplsTpNotifications 4 } vRtrMplsTpLspActivePathUp NOTIFICATION-TYPE OBJECTS { vRtrMplsTpLspPathState } STATUS current DESCRIPTION "[CAUSE] The vRtrMplsTpLspActivePathUp notification is generated when a MPLS-TP LSP Path comes up. [EFFECT] The TP-Path is the active path in the tunnel that is used to transport user traffic. [RECOVERY] There is no recovery required for this notification." ::= { vRtrMplsTpNotifications 5 } vRtrMplsTpLspActivePathChange NOTIFICATION-TYPE OBJECTS { vRtrMplsTpLspPathState, vRtrMplsTpLspOldPathIndex } STATUS current DESCRIPTION "[CAUSE] The vRtrMplsTpLspActivePathChange notification is generated when a MPLS-TP LSP Path changes its path from working to protecting or vice versa. The old path is specified by vRtrMplsTpLspOldPathIndex. [EFFECT] The TP Path after the switch will be used to transport user traffic. [RECOVERY] There is no recovery required for this notification." ::= { vRtrMplsTpNotifications 6 } END