TIMETRA-L2TP-MIB DEFINITIONS ::= BEGIN IMPORTS CounterBasedGauge64 FROM HCNUM-TC InterfaceIndexOrZero FROM IF-MIB InetAddress, InetAddressPrefixLength, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF Counter32, Counter64, Gauge32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, TimeTicks, Unsigned32 FROM SNMPv2-SMI DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue FROM SNMPv2-TC tmnxCardSlotNum, tmnxChassisIndex, tmnxMDASlotNum FROM TIMETRA-CHASSIS-MIB timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs FROM TIMETRA-GLOBAL-MIB iesIfIndex, svcId FROM TIMETRA-SERV-MIB TBurstSizeBytesOverride, TCIRRateOverride, TDirectionIngEgr, TItemDescription, TLNamedItemOrEmpty, TNamedItem, TNamedItemOrEmpty, TPIRRateOverride, TQosOverrideType, TmnxAccessLoopEncapDataLink, TmnxAccessLoopEncaps1, TmnxAccessLoopEncaps2, TmnxActionType, TmnxAdminState, TmnxAncpStringOrZero, TmnxAppProfileStringOrEmpty, TmnxAsciiSpecification, TmnxBinarySpecification, TmnxDefSubIdSource, TmnxEncapVal, TmnxEsaNum, TmnxEsaVappNum, TmnxL2tpTunnelGroupName, TmnxL2tpTunnelGroupNameOrEmpty, TmnxManagedRouteStatus, TmnxMlpppEpClass, TmnxOperState, TmnxPortID, TmnxPppCpState, TmnxPppNcpProtocol, TmnxPppoeSessionInfoOrigin, TmnxPppoeSessionType, TmnxPppoeUserNameOrEmpty, TmnxServId, TmnxSlaProfileStringOrEmpty, TmnxSubIdentStringOrEmpty, TmnxSubMgtIntDestIdOrEmpty, TmnxSubNasPortPrefixType, TmnxSubNasPortSuffixType, TmnxSubNasPortTypeType, TmnxSubProfileStringOrEmpty, TmnxSubRadServAlgorithm, TmnxVRtrID, TmnxVRtrIDOrZero, TmnxVcId FROM TIMETRA-TC-MIB vRtrID FROM TIMETRA-VRTR-MIB ; timetraL2tpMIBModule MODULE-IDENTITY LAST-UPDATED "201803150000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This document is the SNMP MIB module to manage and provision the Layer Two Tunneling Protocol (L2TP) for the Nokia SROS device. Copyright 2009-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201803150000Z" DESCRIPTION "Rev 16.0 15 March 2018 00:00 16.0 release of the TIMETRA-L2TP-MIB." REVISION "201703150000Z" DESCRIPTION "Rev 15.0 15 March 2017 00:00 15.0 release of the TIMETRA-L2TP-MIB." REVISION "201601010000Z" DESCRIPTION "Rev 14.0 1 Jan 2016 00:00 14.0 release of the TIMETRA-L2TP-MIB." REVISION "201501010000Z" DESCRIPTION "Rev 13.0 1 Jan 2015 00:00 13.0 release of the TIMETRA-L2TP-MIB." REVISION "201401010000Z" DESCRIPTION "Rev 12.0 1 Jan 2014 00:00 12.0 release of the TIMETRA-L2TP-MIB." REVISION "201102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-L2TP-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-L2TP-MIB." ::= { timetraSRMIBModules 60 } TmnxAlwaysNeverOrDefault ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxAlwaysNeverOrDefault data type is an enumerated integer that describes a 'boolean-like' value that can be set to a default value. The value 'default' specifies that the actual value must be derived from another object of the same type with a wider scope." SYNTAX INTEGER { default (1), never (2), always (3) } TmnxAlwaysOrNever ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxAlwaysOrNever data type is an enumerated integer that describes a 'boolean value that can be used together with the 'TmnxAlwaysNeverOrDefault' data type. Use 'TmnxAlwaysOrNever' at the highest level and 'TmnxAlwaysNeverOrDefault' at lower levels of inheritance." SYNTAX INTEGER { never (2), always (3) } TmnxL2tpActionTypeDrain ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpActionTypeDrain data type is an enumerated integer that describes the values used to specify the type of drain action." SYNTAX INTEGER { drain (0), stopDrain (1), notApplicable (2) } TmnxL2tpAuthSecret ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpAuthSecret data type contains a shared secret used during the tunnel authentication phase of tunnel establishment." SYNTAX DisplayString (SIZE (0..64)) TmnxL2tpAvpHidingMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpAvpHidingMode data type is an enumerated integer that describes when the H bit is set in a L2TP Attribute Value Pair (AVP). The value 'never' specifies that the H bit is never set. The value 'sensitive' specifies that the H bit is only set for AVPs containing sensitive information. The value 'always' specifies that the H bit is set for all AVPs where it is allowed. The value 'default' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX INTEGER { default (1), never (2), sensitive (3), always (4) } TmnxL2tpCdnResult ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpCdnResult data type is an enumerated integer that indicates the result of a CDN (Call-Disconnect-Notify) message. The values (0..11) are supported in both L2TP and Layer Two Tunneling Protocol - Version 3 (L2TPv3), the values (13..16) are supported in L2TPv3 only." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes. RFC 3931 Layer Two Tunneling Protocol - Version 3 (L2TPv3), section 10.3 Result Code AVP Values." SYNTAX INTEGER { noError (0), lossCarrier (1), generalError (2), admin (3), noFacTemporary (4), noFacPermanent (5), invalidDest (6), noCarrier (7), busy (8), noDialTone (9), notEstab (10), noFraming (11), lossTieBreaker (13), pwTypeNotSupported (14), seqWithoutValidL2 (15), finitStateMachine (16) } TmnxL2tpConfPwType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpConfPwType data type contains the configurable Pseudo Wire types for a Layer Two Tunneling Protocol connection." SYNTAX BITS { ethernet (0), ethernetVlan (1) } TmnxL2tpConnectionId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpConnectionId data type contains an identification number for a Layer Two Tunneling Protocol Connection." SYNTAX Unsigned32 (0..4294967295) TmnxL2tpCookieLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The length of the cookie added to the data messages of the L2TP session. The value '0' means no cookie is added. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | 0 | 4 | 8) TmnxL2tpDigestType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The digest type to be used in the Message Digest AVP of the outgoing control messages of the L2TP tunnel. The value 'none' means no Message Digest AVP is added to outgoing control messages of the L2TP tunnel. The value 'default' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX INTEGER { default (0), none (1), md5 (2), sha1 (3) } TmnxL2tpDoChallenge ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpDoChallenge data type is an enumerated integer that describes when challenge-response authentication is to be used. The value 'never' specifies that challenge-response authentication is never used. The value 'always' specifies that challenge-response authentication is always used. The value 'default' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX INTEGER { default (1), never (2), always (3) } TmnxL2tpFailoverRecoveryMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpFailoverRecoveryMethod data type is an enumerated integer that describes how a pair of redundant LAC peers recover tunnel and session state (sequence numbers, for example) immediately after a failover; note that, while failover is enabled, the tunnels and sessions proper are always kept synchronized between the redundant pair, regardless of the recovery method for the sequence numbers when a failover really occurs. The value 'recoveryTunnel' specifies that the stateful information is recovered as described in RFC 4951 'Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP)'; this method uses a recovery tunnel to the L2TP peer to pass the stateful information. The value 'mcs' specifies that the stateful information is recovered from the failover peer directly, using Multi-Chassis Redundancy Synchronization (MCS). The value 'default' specifies that the actual value must be derived from another object of the same type with a wider scope." SYNTAX INTEGER { default (0), mcs (1), recoveryTunnel (2) } TmnxL2tpFailoverRecoveryTime ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The period of time, expressed in seconds, an endpoint asks its peer to wait before assuming the recovery process has failed. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | 0..900) TmnxL2tpErrorMessage ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpErrorMessage data type describes a L2TP error condition in human readable form." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." SYNTAX DisplayString (SIZE (0..255)) TmnxL2tpGeneralError ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpGeneralError data type is an enumerated integer that indicates types of errors that are not specific to any particular L2TP request, but rather to protocol or message format errors." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." SYNTAX INTEGER { noError (0), noControl (1), wrongLength (2), fieldOutOfRange (3), insufficientRes (4), sessionIdInvalid (5), vendorSpecific (6), tryAnother (7), unknownMandatory (8), tryAnotherDirected (9) } TmnxL2tpHostNameOrEmpty ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpHostNameOrEmpty data type contains a valid string to identify the host name of a Layer Two Tunneling Protocol Tunnel remote system (client) or server. An empty string indicates that no host name is defined." SYNTAX DisplayString (SIZE (0..64)) TmnxL2tpIsaGrpId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpIsaGrpId data type contains an identification number for a Layer Two Tunneling Protocol Integrated Service Adaptor group." SYNTAX Unsigned32 (1..4) TmnxL2tpIsaGrpIdOrZero ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpIsaGrpIdOrZero data type contains an identification number for a Layer Two Tunneling Protocol Integrated Service Adaptor (ISA) group. The value zero means that no L2TP ISA Group is defined." SYNTAX Unsigned32 (0..4) TmnxL2tpIsaMdaLoadBalanceMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpIsaMdaLoadBalanceMethod data type is an enumerated integer that describes how new sessions are assigned to a L2TP ISA MDA. The value 'perSession' specifies that the lowest granularity for load-balancing is a session; each session can be assigned to a different ISA MDA. The value 'perTunnel' specifies that the lowest granularity for load-balancing is a tunnel; all sessions associated with the same tunnel are assigned to the same ISA MDA; this may be useful or required in certain cases, for example: - MLPPP with multiple links per bundle; - HPol intermediate destination arbiters where the intermediate destination is a L2TP tunnel. The meaning of the value 'default' depends on the object." SYNTAX INTEGER { default (0), perSession (1), perTunnel (2) } TmnxL2tpIsaMdaOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpIsaMdaOperState data type is an enumerated integer that describes the values used to identify the operational state of the L2TP ISA MDA." SYNTAX INTEGER { unknown (1), inService (2), outOfService (3), draining (4), drained (5) } TmnxL2tpLcpKaHoldUpMplier ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpLcpKaHoldUpMplier data type contains a number that specifies how many LCP keepalive messages can be missed before the related session is brought down. The value '0' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX Unsigned32 (0 | 1..5) TmnxL2tpLcpKaInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpLcpKaInterval data type contains a number that specifies the time interval in seconds at which LCP echo requests are transmitted. The value '0' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX Unsigned32 (0 | 10..300) TmnxL2tpMlpppEndpointClass ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpMlpppEndpointClass data type is an enumerated integer that specifies the class of an MLPPP endpoint specification. This is used to identify a value to be transmitted in the MLPPP Endpoint Discriminator Option The value 'ipv4Address' specifies that a configured IPv4 address be used. The value 'macAddress' specifies that a configured IEEE 802.1 MAC address be used. The meaning of 'default' depends on the object." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." SYNTAX INTEGER { default (0), ipv4Address (2), macAddress (3) } TmnxL2tpMlpppMaxFragDelay ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpMlpppMaxFragDelay data type contains a number that specifies the maximum delay of a fragment, expressed in milliseconds. The meaning of the value '0' depends on the object." SYNTAX Unsigned32 (0 | 5..1000) TmnxL2tpMlpppReassemblyTimeout ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpMlpppReassemblyTimeout data type contains a number that specifies the maximum time, expressed in milliseconds, that the system will keep incomplete packets while reassembling fragments. The value '0' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX Unsigned32 (0 | 100 | 1000) TmnxL2tpNonceLength ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpNonceLength data type contains the length of the nonce in the Control Message Authentication Nonce AVP added to outgoing control messages. The value '0' means no Control Message Authentication Nonce AVP will be added to outgoing control messages. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | 0 | 16..64) TmnxL2tpPeerAddrChangePolicy ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpPeerAddrChangePolicy data type is an enumerated integer that specifies what to do in case the system receives a L2TP response from another address than the one the request was sent to. The value 'accept' specifies that this system accepts any source IP address change of received L2TP control messages related to a locally originated tunnel in the state 'waitReply' and rejects any peer address change for other tunnels; in case the new peer IP address is accepted, it is learned and used as destination address in subsequent L2TP messages. The value 'ignore' specifies that this system ignores any source IP address change of received L2TP control messages, does not learn any new peer IP address and does not change the destination address in subsequent L2TP messages. The value 'reject' specifies that this system rejects any source IP address change of received L2TP control messages and drops those messages." SYNTAX INTEGER { accept (1), ignore (2), reject (3) } TmnxL2tpPppAuthentication ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpPppAuthentication data type is an enumerated integer that specifies what PPP authentication protocol(s) must be negotiated during the LCP phase. The value 'prefChap' specifies that an attempt is made to negotiate CHAP first, possibly followed by an attempt to negotiate PAP. The value 'prefPap' specifies that an attempt is made to negotiate PAP first, possibly followed by an attempt to negotiate CHAP. The value 'default (0)' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX INTEGER { default (0), pap (1), chap (2), prefChap (3), prefPap (4) } TmnxL2tpPppMtu ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpPppMtu data type contains a number that specifies the largest IP packet that can be sent out without being fragmented. The value '0' specifies that the actual value must be derived from another object of the same type but a wider scope." SYNTAX Unsigned32 (0 | 512..9212) TmnxL2tpPresentInPacketType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpPresentInPacketType data type defines in what type of data packets an attribute might be present, or not." SYNTAX INTEGER { undefined (0), all (1), never (2), nonIp (3) } TmnxL2tpProtocolVersion ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpProtocolVersion data type defines the protocol version for Layer Two Tunneling Protocol tunnels." SYNTAX INTEGER { undefined (0), v2 (1), v3 (2), v3draft (3) } TmnxL2tpReceiveWindowSize ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpReceiveWindowSize data type contains a number that specifies the Receive Window Size (RWS). The value '0' specifies that the actual value must be derived from another object of the same type but a wider scope." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 5.8 Reliable Delivery of Control Messages." SYNTAX Unsigned32 (0 | 4..1024) TmnxL2tpReconnectTimeout ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The time interval, expressed in seconds, at which another attempt is made to setup an ethernet tunnel, after a previous setup failure. The value '-1' means 'infinite' timeout. The value '-2' means that the actual value must be derived from another object of the same type, but with a wider scope." SYNTAX Integer32 (-2 | -1 | 10..3600) TmnxL2tpRoles ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpRoles data type is a set of roles." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 1.1 Specification of Requirements." SYNTAX BITS { roleLAC (0), roleLNS (1) } TmnxL2tpSeOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTuOperState data type is an enumerated integer that describes the values used to identify the operational state of the L2TP session." SYNTAX INTEGER { unknown (0), idle (1), waitTunnel (2), waitReply (3), waitAcceptance (4), waitConnected (5), established (6), closed (7), closedByPeer (8) } TmnxL2tpSessionAssignMethod ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpSessionAssignMethod data type is an enumerated integer that describes how new sessions are assigned to one of the set of suitable tunnels that are available or could be made available. The value 'existingFirst' specifies that the first suitable tunnel is used or set up for the first session and reused for all subsequent sessions. The value 'weighted' specifies that the sessions are shared between the available tunnels; if necessary, new tunnels are set up until the maximum number is reached; the distribution aims at an equal ratio of the actual number of sessions to the maximum number of sessions. The value 'weightedRandom' is identical to 'weighted' except that one tunnel is picked randomly from the ones that have the same lowest ratio of the actual number of sessions to the maximum number of sessions. The value 'default' specifies that the actual value must be derived from another object of the same type with a wider scope." SYNTAX INTEGER { default (0), existingFirst (1), weighted (2), weightedRandom (3) } TmnxL2tpSessionId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpSessionId data type contains an identification number for a Layer Two Tunneling Protocol Session. This data type is only meaningful in the context of L2TP version 2; in this case, the range of valid values is (1..65535). In the context of L2TP version 3, the value is equal to the least significant 16-bit of the connection ID." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 3.1 L2TP Header Format." SYNTAX Unsigned32 (0..65535) TmnxL2tpStatPwType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpStatPwType data type contains the Pseudo Wire type within the status info for a Layer Two Tunneling Protocol connection." REFERENCE "RFC 4446, section 3.2 MPLS Pseudo Wire type." SYNTAX INTEGER { ethernetVlan (4), ethernet (5), ppp (7) } TmnxL2tpStopCcnResult ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpStopCcnResult data type is an enumerated integer that indicates the result of a 'StopCCN' (Stop-Control-Connection-Notification) message." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." SYNTAX INTEGER { noError (0), generalReq (1), generalErr (2), alreadyExists (3), reqNotAuth (4), version (5), reqShutDown (6), fsmError (7) } TmnxL2tpTgOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTgOperState data type is an enumerated integer that describes the values used to identify the operational state of the L2TP tunnel group." SYNTAX INTEGER { active (1), drain (2) } TmnxL2tpTransportType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTransportType data type is an enumerated integer that describes the transport type (aka type of Packet-Switched Network) used to carry the L2TP messages." SYNTAX INTEGER { unknown (0), udpIp (1), ip (2) } TmnxL2tpTunnelDestructTO ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The period of time, expressed in seconds, that the data of a disconnected tunnel persists before being removed. If the system needs the resources taken by the disconnected tunnel data, it may remove the data earlier. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | 60..86400) TmnxL2tpTunnelHelloInterval ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The time interval, expressed in seconds, between two consecutive tunnel Hello messages. The value '-1' means that the keepalive function is disabled. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 6.5 Hello." SYNTAX Integer32 (-2 | -1 | 10..3600) TmnxL2tpTunnelId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTunnelId data type contains an identification number for a Layer Two Tunneling Protocol Tunnel. This data type is only meaningful in the context of L2TP version 2; in this case, the range of valid values is (1..65535). In the context of L2TP version 3, the value is equal to the most significant 16-bit of the connection ID." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 3.1 L2TP Header Format." SYNTAX Unsigned32 (0..65535) TmnxL2tpTunnelIdleTO ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The period of time, expressed in seconds, that an established tunnel with no active sessions persists before being disconnected. A value of '-1' leaves a tunnel up indefinitely. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | -1 | 0..3600) TmnxL2tpTunnelMaxRetx ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The number of retries allowed for a tunnel before its control connection goes down. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | 2..7) TmnxL2tpTunnelName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTunnelName data type contains a valid string to identify a Layer Two Tunneling Protocol Tunnel." SYNTAX DisplayString (SIZE (1..63)) TmnxL2tpTunnelNameOrEmpty ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTunnelNameOrEmpty data type contains a valid string to identify a Layer Two Tunneling Protocol Tunnel. An empty string indicates that no Tunnel is defined." SYNTAX DisplayString (SIZE (0..63)) TmnxL2tpTunnelPreference ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTunnelPreference data type contains a number that indicates the relative preference assigned to a tunnel. The value '0' corresponds to the highest preference." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support, section 3.8. Tunnel-Preference" SYNTAX Unsigned32 (0..16777215) TmnxL2tpSessionLimit ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The number of sessions allowed. The actual maximum number of sessions may vary, depending the system configuration. The value '-1' means 'unlimited' number of sessions. The value '-2' means that the actual value must be derived from another object of the same type but with a wider scope." SYNTAX Integer32 (-2 | -1 | 1..250000) TmnxL2tpTuOperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTuOperState data type is an enumerated integer that describes the values used to identify the operational state of the L2TP tunnel." SYNTAX INTEGER { unknown (1), idle (2), waitReply (3), waitConn (4), establishedIdle (5), established (6), draining (7), drained (8), closed (9), closedByPeer (10) } TmnxL2tpTuProtStatsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL2tpTuProtStatsType data type is an enumerated integer that describes the values used to identify the protocol statistics of the L2TP tunnel." SYNTAX INTEGER { event (1), droppedMsgType (2), acceptedMsgType (3), originalTransmittedMsgType (4), retransmittedMsgType (5), incomingCDNresultCode (6), incomingStopCCNresultCode (7), incomingErrorCode (8), outgoingCDNresultCode (9), outgoingStopCCNresultCode (10), outgoingErrorCode (11) } tmnxL2tp OBJECT IDENTIFIER ::= { tmnxSRObjs 60 } tmnxL2tpObjs OBJECT IDENTIFIER ::= { tmnxL2tp 1 } tmnxL2tpVrtrObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 1 } tmnxL2tpVrtrCfgObjs OBJECT IDENTIFIER ::= { tmnxL2tpVrtrObjs 1 } tmnxL2tpTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains L2TP configuration information about virtual routers. Rows in this table can be created or deleted via SNMP operations. Rows in this table are automatically deleted when the corresponding row in the vRtrConfTable is deleted. The conceptual row that corresponds to the Base router instance, however, is automatically created by the system, and cannot be created or deleted via SNMP operations." ::= { tmnxL2tpVrtrCfgObjs 2 } tmnxL2tpEntry OBJECT-TYPE SYNTAX TmnxL2tpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2TP specific information about a virtual router. Each entry represents a L2TP protocol instance." INDEX { vRtrID } ::= { tmnxL2tpTable 1 } TmnxL2tpEntry ::= SEQUENCE { tmnxL2tpLastMgmtChange TimeStamp, tmnxL2tpAdminState TmnxAdminState, tmnxL2tpSessionLimit TmnxL2tpSessionLimit, tmnxL2tpReceiveWindowSize TmnxL2tpReceiveWindowSize, tmnxL2tpRowStatus RowStatus, tmnxL2tpPeerAddrChangePlcy TmnxL2tpPeerAddrChangePolicy, tmnxL2tpAvpExclude BITS, tmnxL2tpAvpCallingNumberSpec TmnxAsciiSpecification, tmnxL2tpAccountingPolicy TNamedItemOrEmpty, tmnxL2tpHelloInterval TmnxL2tpTunnelHelloInterval, tmnxL2tpIdleTO TmnxL2tpTunnelIdleTO, tmnxL2tpDestructTO TmnxL2tpTunnelDestructTO, tmnxL2tpMaxRetxEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpMaxRetxNotEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTunnelSessionLimit TmnxL2tpSessionLimit, tmnxL2tpGroupSessionLimit TmnxL2tpSessionLimit, tmnxL2tpAvpHiding TmnxL2tpAvpHidingMode, tmnxL2tpDoChallenge TmnxL2tpDoChallenge, tmnxL2tpSecret TmnxL2tpAuthSecret, tmnxL2tpSessionAssignMethod TmnxL2tpSessionAssignMethod, tmnxL2tpLocalName TmnxL2tpHostNameOrEmpty, tmnxL2tpAddrType InetAddressType, tmnxL2tpAddr InetAddress, tmnxL2tpAvpIgnore BITS, tmnxL2tpRtmDebounceTime Unsigned32 } tmnxL2tpLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpEntry 1 } tmnxL2tpAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpAdminState specifies the administrative state of this L2TP protocol instance." DEFVAL { outOfService } ::= { tmnxL2tpEntry 2 } tmnxL2tpSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpSessionLimit specifies the maximum number of sessions in this L2TP protocol instance. The value '-2' is not allowed because this is the widest scope for TmnxL2tpSessionLimit." DEFVAL { -1 } ::= { tmnxL2tpEntry 3 } tmnxL2tpReceiveWindowSize OBJECT-TYPE SYNTAX TmnxL2tpReceiveWindowSize MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpReceiveWindowSize specifies the Receive Window Size in this L2TP protocol instance. The value '0' is not allowed." DEFVAL { 64 } ::= { tmnxL2tpEntry 4 } tmnxL2tpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpRowStatus specifies the row status of this row." ::= { tmnxL2tpEntry 5 } tmnxL2tpPeerAddrChangePlcy OBJECT-TYPE SYNTAX TmnxL2tpPeerAddrChangePolicy MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerAddrChangePlcy specifies what to do in case the system receives a L2TP response from another address than the one the request was sent to, for a tunnel in this L2TP protocol instance." DEFVAL { reject } ::= { tmnxL2tpEntry 6 } tmnxL2tpAvpExclude OBJECT-TYPE SYNTAX BITS { callingNumber (0), initialRxLcpConfReq (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpAvpExclude specifies what AVPs (Attribute Value Pairs) to exclude from L2TP control outgoing messages related to a session in this L2TP protocol instance." DEFVAL { {} } ::= { tmnxL2tpEntry 7 } tmnxL2tpAvpCallingNumberSpec OBJECT-TYPE SYNTAX TmnxAsciiSpecification MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpAvpCallingNumberSpec specifies what string to put in the Calling Number AVP, for L2TP control messages related to a session in this L2TP protocol instance. This value is not applicable if the 'callingNumber' bit is set in the object tmnxL2tpAvpExclude. ::= 'S' | 'c' | 's' | 'r' 'S' - system name, the value of TIMETRA-CHASSIS-MIB::tmnxChassisName 'c' - Agent Circuit Id 's' - SAP ID, formatted as a character string 'r' - Agent Remote Id An empty string is not allowed. Example: '%S %s' means 'the system name, followed by a blank space, followed by the SAP ID formatted as a string'." DEFVAL { "%S %s" } ::= { tmnxL2tpEntry 8 } tmnxL2tpAccountingPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpAccountingPolicy specifies the RADIUS accounting policy to use in this L2TP protocol instance. It refers to a conceptual row in the tmnxL2tpApTable. The value of tmnxL2tpAccountingPolicy can be overruled by a non-empty value of tmnxL2tpTgCfgAccountingPolicy or tmnxL2tpTuCfgAccountingPolicy." DEFVAL { "" } ::= { tmnxL2tpEntry 10 } tmnxL2tpHelloInterval OBJECT-TYPE SYNTAX TmnxL2tpTunnelHelloInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpHelloInterval specifies the time interval between two consecutive tunnel Hello messages. A value of '-1' specifies that the keepalive function is disabled. The value '-2' is not allowed because this is the widest scope for TmnxL2tpTunnelHelloInterval." DEFVAL { 300 } ::= { tmnxL2tpEntry 11 } tmnxL2tpIdleTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelIdleTO UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIdleTO specifies the period of time that an established tunnel with no active sessions will persist before being disconnected. A value of -1 leaves the tunnel up indefinitely. The value '-2' is not allowed because this is the widest scope for TmnxL2tpTunnelIdleTO." DEFVAL { -1 } ::= { tmnxL2tpEntry 12 } tmnxL2tpDestructTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelDestructTO UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpDestructTO specifies the period of time that the data of a disconnected tunnel will persist before being removed. The value '-2' is not allowed because this is the widest scope for TmnxL2tpTunnelDestructTO." DEFVAL { 60 } ::= { tmnxL2tpEntry 13 } tmnxL2tpMaxRetxEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpMaxRetxEstab specifies the number of retries allowed for established tunnels before their control connection goes down. The value '-2' is not allowed because this is the widest scope for TmnxL2tpTunnelMaxRetx." DEFVAL { 5 } ::= { tmnxL2tpEntry 14 } tmnxL2tpMaxRetxNotEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpMaxRetxNotEstab specifies the number of retries allowed for unestablished tunnels before their control connection goes down. The value '-2' is not allowed because this is the widest scope." DEFVAL { 5 } ::= { tmnxL2tpEntry 15 } tmnxL2tpTunnelSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTunnelSessionLimit specifies the maximum number of sessions in all Layer Two Tunneling Protocol Tunnels of this virtual router. The number of sessions allowed for a tunnel is currently limited to 65535. The reason is that currently only L2TP version 2 is supported, and version 2 uses a 16 bit number to identify a session. A value equal or higher than 65535 is changed to '-1', which means 'unlimited'. The value '-2' is not allowed because this is the widest scope for TmnxL2tpSessionLimit." DEFVAL { -1 } ::= { tmnxL2tpEntry 16 } tmnxL2tpGroupSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpGroupSessionLimit specifies the maximum number of sessions in all Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The value '-2' is not allowed because this is the widest scope for TmnxL2tpSessionLimit." DEFVAL { -1 } ::= { tmnxL2tpEntry 17 } tmnxL2tpAvpHiding OBJECT-TYPE SYNTAX TmnxL2tpAvpHidingMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpAvpHiding specifies the method to be used for the authentication of the tunnels in this virtual router. The value 'default' is not allowed because this is the widest scope for TmnxL2tpAvpHidingMode." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.3 Hiding of AVP Attribute Values." DEFVAL { never } ::= { tmnxL2tpEntry 18 } tmnxL2tpDoChallenge OBJECT-TYPE SYNTAX TmnxL2tpDoChallenge MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpDoChallenge specifies when challenge-response is to be used for the authentication of the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The value 'default' is not allowed because this is the widest scope for TmnxL2tpDoChallenge." DEFVAL { never } ::= { tmnxL2tpEntry 19 } tmnxL2tpSecret OBJECT-TYPE SYNTAX TmnxL2tpAuthSecret MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpSecret specifies the password to be used to calculate the challenge response of the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The password is also used for AVP hiding in case of protocol version V2. For any given tunnel in this group, the value of tmnxL2tpSecret can be overruled with the value of tmnxL2tpTgCfgSecret. This object will always return an empty string on a read." DEFVAL { ''H } ::= { tmnxL2tpEntry 20 } tmnxL2tpSessionAssignMethod OBJECT-TYPE SYNTAX TmnxL2tpSessionAssignMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpSessionAssignMethod specifies the method to be used for the authentication of the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router. The value 'default' is not allowed because this is the widest scope for TmnxL2tpSessionAssignMethod." DEFVAL { existingFirst } ::= { tmnxL2tpEntry 21 } tmnxL2tpLocalName OBJECT-TYPE SYNTAX TmnxL2tpHostNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLocalName specifies the host name used by this system for the tunnels in the Layer Two Tunneling Protocol Tunnel Groups of this virtual router during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Client-Auth-ID. It can be used to distinguish tunnels. An empty string specifies that the system name (SNMPv2-MIB::sysName) is used." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.9." DEFVAL { ''H } ::= { tmnxL2tpEntry 22 } tmnxL2tpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpAddrType specifies the address type of tmnxL2tpAddr." DEFVAL { unknown } ::= { tmnxL2tpEntry 23 } tmnxL2tpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpAddr specifies the local IP address of the tunnels in the L2TP Tunnel Groups of this virtual router." DEFVAL { ''H } ::= { tmnxL2tpEntry 24 } tmnxL2tpAvpIgnore OBJECT-TYPE SYNTAX BITS { sequencing-required (0) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpAvpIgnore specifies what AVPs (Attribute Value Pairs) to ignore from L2TP control incoming messages related to a session in this L2TP protocol instance." DEFVAL { {} } ::= { tmnxL2tpEntry 25 } tmnxL2tpRtmDebounceTime OBJECT-TYPE SYNTAX Unsigned32 (0..5000 | 4294967295) UNITS "ms" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpRtmDebounceTime specifies the debounce time the system applies before reacting to relevant events signalled by the system's Routing Table Manager (RTM). The time is expressed in ms, but rounded to multiples of 100 ms. The value all ones (4294967295) means infinite. An example of a relevant RTM event is 'no route to destination' for the remote IP address of a L2TP tunnel; the system may react to to this event by tearing down the tunnel." DEFVAL { 4294967295 } ::= { tmnxL2tpEntry 27 } tmnxL2tpXtTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpXtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains L2TP configuration information about virtual routers. A conceptual row in this table is created automatically by the system when a row in the tmnxL2tpTable is created. Rows in this table are automatically deleted when the corresponding row in the vRtrConfTable or the tmnxL2tpTable is deleted. The conceptual row that corresponds to the Base router instance, however, is automatically created by the system, and cannot be created or deleted via SNMP operations." ::= { tmnxL2tpVrtrCfgObjs 3 } tmnxL2tpXtEntry OBJECT-TYPE SYNTAX TmnxL2tpXtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2TP specific information about a virtual router. Each entry represents a L2TP protocol instance." AUGMENTS { tmnxL2tpEntry } ::= { tmnxL2tpXtTable 1 } TmnxL2tpXtEntry ::= SEQUENCE { tmnxL2tpXtNextAttempt INTEGER, tmnxL2tpXtLastMgmtChange TimeStamp, tmnxL2tpXtTuSelBlacklistReason BITS, tmnxL2tpXtTuSelBlacklistMaxTime Integer32, tmnxL2tpXtTuSelBlacklistLength Integer32, tmnxL2tpXtTuSelBlacklistToAction INTEGER, tmnxL2tpXtReplaceResultCodes BITS, tmnxL2tpXtAvpCiscoNasPortEth TmnxBinarySpecification, tmnxL2tpXtAvpCiscoNasPortAtm TmnxBinarySpecification, tmnxL2tpXtDfBitLac TmnxAlwaysOrNever, tmnxL2tpXtFoRecoveryMethod TmnxL2tpFailoverRecoveryMethod, tmnxL2tpXtFoRecoveryTime TmnxL2tpFailoverRecoveryTime, tmnxL2tpXtFoRecoveryMaxSeLifeT Unsigned32 } tmnxL2tpXtNextAttempt OBJECT-TYPE SYNTAX INTEGER { samePreferenceLevel (0), nextPreferenceLevel (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtNextAttempt specifies the next tunnel to be used in case the session setup fails. A value of 'samePreferenceLevel(0)' specifies to try first any alternative tunnel from the same preference level before falling back to a lower preference level. A value of 'nextPreferenceLevel(1)' specifies to try a tunnel with a lower preference level (higher preference value)." DEFVAL { nextPreferenceLevel } ::= { tmnxL2tpXtEntry 1 } tmnxL2tpXtLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpXtEntry 2 } tmnxL2tpXtTuSelBlacklistReason OBJECT-TYPE SYNTAX BITS { addrChangeTimeout (0), cdnErrCode (1), cdnInvDest (2), cdnPermNoFacilities (3), cdnTmpNoFacilities (4), stopCcnErrCode (5), stopCcnOther (6), txCdnNotEstablishedInTime (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtTuSelBlacklistReason specifies the CDN or StopCCN result codes or tunnel or session setup failure condition that determine which tunnels are added to the tunnel-selection-blacklist. The system will never try to put a session in a tunnel from the tunnel-selection-blacklist when alternative tunnels are available. If no value is selected for tmnxL2tpXtTuSelBlacklistReason the tunnel-selection-blacklist is disabled." DEFVAL { {} } ::= { tmnxL2tpXtEntry 3 } tmnxL2tpXtTuSelBlacklistMaxTime OBJECT-TYPE SYNTAX Integer32 (1..60) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtTuSelBlacklistMaxTime specifies the maximum time a tunnel or peer may remain in the tunnel-selection-blacklist." DEFVAL { 5 } ::= { tmnxL2tpXtEntry 4 } tmnxL2tpXtTuSelBlacklistLength OBJECT-TYPE SYNTAX Integer32 (-1 | 1..65535) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtTuSelBlacklistLength specifies how many items (tunnels or peers) can be in the tunnel-selection-blacklist. If a tunnel or peer needs to be added to the tunnel-selection-blacklist and the tunnel-selection-blacklist is full, the system will remove the item (tunnel or peer) from the blacklist that was in this blacklist for the longest time. A value of '-1' specifies there is no limit." DEFVAL { -1 } ::= { tmnxL2tpXtEntry 5 } tmnxL2tpXtTuSelBlacklistToAction OBJECT-TYPE SYNTAX INTEGER { removeFromBlacklist (0), tryOneSession (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtTuSelBlacklistToAction specifies the action to be taken when a tunnel has been in the tunnel-selection-blacklist for the time specified in tmnxL2tpXtTuSelBlacklistMaxTime. A value of 'removeFromBlacklist(0)' specifies the tunnel will be removed from the tunnel-selection-blacklist. A value of 'tryOneSession(1)' specifies the tunnel will remain in the tunnel-selection-blacklist while the system will allow a single session to be added to the tunnel. Only on success will the tunnel be removed from the tunnel-selection-blacklist." DEFVAL { removeFromBlacklist } ::= { tmnxL2tpXtEntry 6 } tmnxL2tpXtReplaceResultCodes OBJECT-TYPE SYNTAX BITS { cdnInvDest (0), cdnPermNoFacilities (1), cdnTmpNoFacilities (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtReplaceResultCodes specifies the return codes that must be replaced by another appropriate result code. This field is typically used to solve interoperability issues. The return codes 'cdnInvDest' (6), 'cdnPermNoFacilities' (5) and 'cdnTmpNoFacilities' (4) are all replaced by result code 'cdnErrCode' (2) and general error code 'insufficient resources' (4)." DEFVAL { {} } ::= { tmnxL2tpXtEntry 7 } tmnxL2tpXtAvpCiscoNasPortEth OBJECT-TYPE SYNTAX TmnxBinarySpecification MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtAvpCiscoNasPortEth specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoE session in this L2TP protocol instance. ::= 'i' | 'm' | 'o' | 'p' | 's' 'i' - inner VLAN ID 'm' - ISA MDA number / ESA number 'o' - outer VLAN ID 'p' - port number 's' - ISA slot number / ESA VAPP number Maximum 32 bits can be specified. If less than 32 bits are specified, the least significant bits are used and the omitted higher bits are set to zero. Note that 'm' and 's' will contain ISA or ESA numbers, depending on the personality of the L2TP group. Example: *12o*12i*2s01 means 'the 12 least significant bits of the outer VLAN ID, followed by the 12 least significant bits of the inner VLAN ID, followed by the two least significant bits of the ISA slot number or the ESA VAPP number, followed by a zero and a one-bit', stored in network order in the least significant bits: 0000ooooooooooooiiiiiiiiiiiiss01. An empty string specifies that the Extended NAS-Port AVP must not be transmitted." DEFVAL { "" } ::= { tmnxL2tpXtEntry 8 } tmnxL2tpXtAvpCiscoNasPortAtm OBJECT-TYPE SYNTAX TmnxBinarySpecification MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtAvpCiscoNasPortAtm specifies what string to put in the Cisco-NAS-Port AVP, for L2TP control messages related to a PPPoA (PPP over ATM) session in this L2TP protocol instance. ::= 'c' | 'i' | 'm' | 'p' | 's' | 'v' 'c' - ATM VCI (Virtual Channel Identifier) 'i' - inner VLAN ID 'm' - ISA MDA number / ESA number 'p' - port number 's' - ISA slot number / ESA VAPP number 'v' - ATM VPI (Virtual Path Identifier) Maximum 32 bits can be specified. If less than 32 bits are specified, the least significant bits are used and the omitted higher bits are set to zero. Note that 'm' and 's' will contain ISA or ESA numbers, depending on the personality of the L2TP group. Example: *12v*12c*2s01 means 'the 12 least significant bits of the ATM VPI, followed by the 12 least significant bits of the inner ATM VCI, followed by the two least significant bits of the ISA slot number or the ESA VAPP number, followed by a zero and a one-bit', stored in network order in the least significant bits: 0000vvvvvvvvvvvvccccccccccccss01. An empty string specifies that the Extended NAS-Port AVP must not be transmitted." DEFVAL { "" } ::= { tmnxL2tpXtEntry 9 } tmnxL2tpXtDfBitLac OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtDfBitLac specifies if this system sets the DF (Don't Fragment) bit in the IP header of the data traffic sent from the LAC to the LNS. If the value of this object is 'always', the DF bit is set in upstream traffic. If the value of this object is 'never', the DF bit is cleared in upstream traffic. The value of this object is only relevant for tunnels where this system performs the LAC role." DEFVAL { always } ::= { tmnxL2tpXtEntry 10 } tmnxL2tpXtFoRecoveryMethod OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP tunnels and sessions associated with this virtual router between this system (performing the LAC role) and its failover peer. The value 'default' is not allowed because this is the widest scope for TmnxL2tpFailoverRecoveryMethod." DEFVAL { mcs } ::= { tmnxL2tpXtEntry 11 } tmnxL2tpXtFoRecoveryTime OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryTime UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. The value '-2' is not allowed because this is the widest scope for TmnxL2tpFailoverRecoveryTime." DEFVAL { 0 } ::= { tmnxL2tpXtEntry 12 } tmnxL2tpXtFoRecoveryMaxSeLifeT OBJECT-TYPE SYNTAX Unsigned32 (2..4294967295) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpXtFoRecoveryMaxSeLifeT specifies the subset of sessions that this system attempts to synchronize in the Session State Synchronization phase as described in RFC 4951 'Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP)'. This system will only synchronize the sessions with a lifetime shorter than or equal to the value of tmnxL2tpXtFoRecoveryMaxSeLifeT. The lifetime taken into account is the lifetime at the moment the system is triggered to start recovery. The value of is only relevant while the value of tmnxL2tpXtFoRecoveryMethod is equal to 'recoveryTunnel'." DEFVAL { 2 } ::= { tmnxL2tpXtEntry 13 } tmnxL2tpV3Table OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpV3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains L2TPv3 configuration information about virtual routers. A conceptual row in this table is created automatically by the system when a row in the tmnxL2tpTable is created. Rows in this table are automatically deleted when the corresponding row in the vRtrConfTable or the tmnxL2tpTable is deleted. The conceptual row that corresponds to the Base router instance, however, is automatically created by the system, and cannot be created or deleted via SNMP operations." ::= { tmnxL2tpVrtrCfgObjs 4 } tmnxL2tpV3Entry OBJECT-TYPE SYNTAX TmnxL2tpV3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2TPv3 specific information about a virtual router. Each entry represents a L2TPv3 protocol instance." AUGMENTS { tmnxL2tpEntry } ::= { tmnxL2tpV3Table 1 } TmnxL2tpV3Entry ::= SEQUENCE { tmnxL2tpV3LastCh TimeStamp, tmnxL2tpV3CookieLen TmnxL2tpCookieLength, tmnxL2tpV3DigestType TmnxL2tpDigestType, tmnxL2tpV3NonceLen TmnxL2tpNonceLength, tmnxL2tpV3TransportType BITS, tmnxL2tpV3ReconnectTimeout TmnxL2tpReconnectTimeout, tmnxL2tpV3Secret TmnxL2tpAuthSecret, tmnxL2tpV3PubTcpMssAdjust Integer32, tmnxL2tpV3PrivTcpMssAdjust Integer32 } tmnxL2tpV3LastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3LastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpV3Entry 1 } tmnxL2tpV3CookieLen OBJECT-TYPE SYNTAX TmnxL2tpCookieLength (0 | 4 | 8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3CookieLen specifies the length of the cookie added to the outgoing data messages of the L2TP session. The value '-2' is not allowed." DEFVAL { 0 } ::= { tmnxL2tpV3Entry 2 } tmnxL2tpV3DigestType OBJECT-TYPE SYNTAX TmnxL2tpDigestType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3DigestType specifies the digest type to be used in the Message Digest AVP of the outgoing control messages of the L2TP tunnel. The value 'default' is not allowed because this is the widest scope for TmnxL2tpDigestType." DEFVAL { none } ::= { tmnxL2tpV3Entry 3 } tmnxL2tpV3NonceLen OBJECT-TYPE SYNTAX TmnxL2tpNonceLength (0 | 16..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3NonceLen specifies the length of the nonce in the Control Message Authentication Nonce AVP added to outgoing control messages. The value '-2' is not allowed." DEFVAL { 0 } ::= { tmnxL2tpV3Entry 4 } tmnxL2tpV3TransportType OBJECT-TYPE SYNTAX BITS { ip (0) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TransportType specifies the list of allowed transport types for L2TPV3." DEFVAL { {} } ::= { tmnxL2tpV3Entry 5 } tmnxL2tpV3ReconnectTimeout OBJECT-TYPE SYNTAX TmnxL2tpReconnectTimeout (-1 | 10..3600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3ReconnectTimeout specifies the time the ethernet tunnel client of L2TP waits before a retry of the session after session setup failed or the session was closed. The value '-2' is not allowed at this highest level." DEFVAL { -1 } ::= { tmnxL2tpV3Entry 6 } tmnxL2tpV3Secret OBJECT-TYPE SYNTAX TmnxL2tpAuthSecret MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpV3Secret specifies the password to be used for AVP hiding and digest calculation for the tunnels in the Layer Two Tunneling Protocol V3 and V3draft Tunnel Groups of this virtual router. For any given tunnel in this group, the value of tmnxL2tpV3Secret can be overruled with the value of tmnxL2tpTgCfgSecret. This object will always return an empty string on a read." DEFVAL { ''H } ::= { tmnxL2tpV3Entry 7 } tmnxL2tpV3PubTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3PubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this virtual router which is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet packet. A value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. When the system receives a TCP SYN packet from the public network and the packet contains an MSS option, the system replaces the MSS option value with tmnxL2tpV3PubTcpMssAdjust when the value of tmnxL2tpV3PubTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the public network and the packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxL2tpV3PubTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -1 } ::= { tmnxL2tpV3Entry 8 } tmnxL2tpV3PrivTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3PrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this virtual router which is sent from the private network to the public network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet packet. A value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. When the system receives a TCP SYN packet from the private network and the packet contains an MSS option, the system replaces the MSS option value with tmnxL2tpV3PrivTcpMssAdjust when the value of tmnxL2tpV3PrivTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the private network and the packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxL2tpV3PrivTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -1 } ::= { tmnxL2tpV3Entry 9 } tmnxL2tpVrtrStatObjs OBJECT IDENTIFIER ::= { tmnxL2tpVrtrObjs 2 } tmnxL2tpStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains L2TP configuration information about virtual routers. The system automatically creates an entry in this table for each virtual router where L2TP is supported. Only the Base router supports L2TP." ::= { tmnxL2tpVrtrStatObjs 1 } tmnxL2tpStatEntry OBJECT-TYPE SYNTAX TmnxL2tpStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2TP specific information about a virtual router. Each entry represents a L2TP protocol instance." INDEX { vRtrID } ::= { tmnxL2tpStatTable 1 } TmnxL2tpStatEntry ::= SEQUENCE { tmnxL2tpStatCleared TimeStamp, tmnxL2tpStatTotalTunnels Counter32, tmnxL2tpStatFailedTunnels Counter32, tmnxL2tpStatFailedTuAuth Counter32, tmnxL2tpStatActiveTunnels Gauge32, tmnxL2tpStatTotalSessions Counter32, tmnxL2tpStatFailedSessions Counter32, tmnxL2tpStatActiveSessions Gauge32, tmnxL2tpStatCurrentTunnels Gauge32, tmnxL2tpStatCurrentSessions Gauge32, tmnxL2tpStatCurrSelBlacklstLen Gauge32, tmnxL2tpStatUnavailTunnelIds Gauge32 } tmnxL2tpStatCleared OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpStatCleared indicates the value of sysUpTime when the system statistics were cleared. The value zero indicates that the system statistics have not been cleared since the last re-initialization of the local network management subsystem." ::= { tmnxL2tpStatEntry 1 } tmnxL2tpStatTotalTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatTotalTunnels indicates the total number of tunnel set up attempts since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpStatEntry 2 } tmnxL2tpStatFailedTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatFailedTunnels indicates the number of tunnels that failed to reach the established state since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpStatEntry 3 } tmnxL2tpStatFailedTuAuth OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatFailedTuAuth indicates the number of tunnels that failed authentication since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpStatEntry 4 } tmnxL2tpStatActiveTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatActiveTunnels indicates the number of tunnels currently established." ::= { tmnxL2tpStatEntry 5 } tmnxL2tpStatTotalSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatTotalSessions indicates the number of session creation attempts since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpStatEntry 6 } tmnxL2tpStatFailedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatFailedSessions indicates the number of sessions that failed to reach the established state since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpStatEntry 7 } tmnxL2tpStatActiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatActiveSessions indicates the number of sessions currently established." ::= { tmnxL2tpStatEntry 8 } tmnxL2tpStatCurrentTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatCurrentTunnels indicates the actual number of tunnels." ::= { tmnxL2tpStatEntry 9 } tmnxL2tpStatCurrentSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatCurrentSessions indicates the actual number of sessions." ::= { tmnxL2tpStatEntry 10 } tmnxL2tpStatCurrSelBlacklstLen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatCurrSelBlacklstLen indicates the actual number of tunnels and peers in the tunnel-selection-blacklist." ::= { tmnxL2tpStatEntry 11 } tmnxL2tpStatUnavailTunnelIds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpStatUnavailTunnelIds indicates the number of tunnel identifiers that is unavailable for the L2TP protocol because they are used by some other application." ::= { tmnxL2tpStatEntry 12 } tmnxL2tpTgObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 2 } tmnxL2tpTgCfgObjs OBJECT IDENTIFIER ::= { tmnxL2tpTgObjs 1 } tmnxL2tpTgCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTgCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains objects to configure L2TP Tunnel Groups." ::= { tmnxL2tpTgCfgObjs 2 } tmnxL2tpTgCfgEntry OBJECT-TYPE SYNTAX TmnxL2tpTgCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Tunnel Group. Entries in this table can be created or deleted via SNMP operations." INDEX { vRtrID, tmnxL2tpTgCfgName } ::= { tmnxL2tpTgCfgTable 1 } TmnxL2tpTgCfgEntry ::= SEQUENCE { tmnxL2tpTgCfgName TmnxL2tpTunnelGroupName, tmnxL2tpTgCfgRowStatus RowStatus, tmnxL2tpTgCfgLastMgmtChange TimeStamp, tmnxL2tpTgCfgDescription TItemDescription, tmnxL2tpTgCfgAdminState TmnxAdminState, tmnxL2tpTgCfgSecret TmnxL2tpAuthSecret, tmnxL2tpTgCfgHelloInterval TmnxL2tpTunnelHelloInterval, tmnxL2tpTgCfgIdleTO TmnxL2tpTunnelIdleTO, tmnxL2tpTgCfgDestructTO TmnxL2tpTunnelDestructTO, tmnxL2tpTgCfgMaxRetxEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTgCfgMaxRetxNotEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTgCfgSessionLimit TmnxL2tpSessionLimit, tmnxL2tpTgCfgAvpHiding TmnxL2tpAvpHidingMode, tmnxL2tpTgCfgSessionAssignMethod TmnxL2tpSessionAssignMethod, tmnxL2tpTgCfgLocalName TmnxL2tpHostNameOrEmpty, tmnxL2tpTgCfgDoChallenge TmnxL2tpDoChallenge, tmnxL2tpTgCfgReceiveWindowSize TmnxL2tpReceiveWindowSize, tmnxL2tpTgCfgIsaGrpId TmnxL2tpIsaGrpIdOrZero, tmnxL2tpTgCfgAddrType InetAddressType, tmnxL2tpTgCfgAddr InetAddress, tmnxL2tpTgCfgLoadBalanceMethod TmnxL2tpIsaMdaLoadBalanceMethod, tmnxL2tpTgCfgAccountingPolicy TNamedItemOrEmpty, tmnxL2tpTgCfgProtocol TmnxL2tpProtocolVersion } tmnxL2tpTgCfgName OBJECT-TYPE SYNTAX TmnxL2tpTunnelGroupName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgName specifies the string to identify this Layer Two Tunneling Protocol Tunnel Group." ::= { tmnxL2tpTgCfgEntry 1 } tmnxL2tpTgCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgRowStatus specifies the row status of this row." ::= { tmnxL2tpTgCfgEntry 2 } tmnxL2tpTgCfgLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpTgCfgEntry 3 } tmnxL2tpTgCfgDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgDescription specifies the description of this Layer Two Tunneling Protocol Tunnel Group." DEFVAL { "" } ::= { tmnxL2tpTgCfgEntry 4 } tmnxL2tpTgCfgAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgAdminState specifies the administrative state of this Layer Two Tunneling Protocol Tunnel Group." DEFVAL { outOfService } ::= { tmnxL2tpTgCfgEntry 5 } tmnxL2tpTgCfgSecret OBJECT-TYPE SYNTAX TmnxL2tpAuthSecret MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgSecret specifies the password to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. For any given tunnel in this group, the value of tmnxL2tpTgCfgSecret can be overruled with the value of tmnxL2tpTuCfgSecret. This value overrules the value of the object tmnxL2tpSecret of the virtual router this tunnel group belongs to. This object will always return an empty string on a read." DEFVAL { ''H } ::= { tmnxL2tpTgCfgEntry 6 } tmnxL2tpTgCfgHelloInterval OBJECT-TYPE SYNTAX TmnxL2tpTunnelHelloInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgHelloInterval specifies the time interval between two consecutive tunnel Hello messages. A value of '-1' specifies that the keepalive function is disabled. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpHelloInterval." DEFVAL { -2 } ::= { tmnxL2tpTgCfgEntry 7 } tmnxL2tpTgCfgIdleTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelIdleTO UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgIdleTO specifies the period of time that an established tunnel with no active sessions will persist before being disconnected. A value of -1 leaves the tunnel up indefinitely. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpIdleTO." DEFVAL { -2 } ::= { tmnxL2tpTgCfgEntry 8 } tmnxL2tpTgCfgDestructTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelDestructTO UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgDestructTO specifies the period of time that the data of a disconnected tunnel will persist before being removed. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpDestructTO." DEFVAL { -2 } ::= { tmnxL2tpTgCfgEntry 9 } tmnxL2tpTgCfgMaxRetxEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgMaxRetxEstab specifies the number of retries allowed for established tunnels before their control connection goes down. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpMaxRetxEstab." DEFVAL { -2 } ::= { tmnxL2tpTgCfgEntry 10 } tmnxL2tpTgCfgMaxRetxNotEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgMaxRetxNotEstab specifies the number of retries allowed for unestablished tunnels before their control connection goes down. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpMaxRetxNotEstab." DEFVAL { -2 } ::= { tmnxL2tpTgCfgEntry 11 } tmnxL2tpTgCfgSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgSessionLimit specifies the maximum number of sessions in this Layer Two Tunneling Protocol Tunnel Group. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpGroupSessionLimit." DEFVAL { -2 } ::= { tmnxL2tpTgCfgEntry 12 } tmnxL2tpTgCfgAvpHiding OBJECT-TYPE SYNTAX TmnxL2tpAvpHidingMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgAvpHiding specifies the method to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpAvpHiding." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.3 Hiding of AVP Attribute Values." DEFVAL { default } ::= { tmnxL2tpTgCfgEntry 13 } tmnxL2tpTgCfgSessionAssignMethod OBJECT-TYPE SYNTAX TmnxL2tpSessionAssignMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgSessionAssignMethod specifies the method to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpSessionAssignMethod." DEFVAL { default } ::= { tmnxL2tpTgCfgEntry 14 } tmnxL2tpTgCfgLocalName OBJECT-TYPE SYNTAX TmnxL2tpHostNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgLocalName specifies the host name used by this system for the tunnels in this Layer Two Tunneling Protocol Tunnel Group during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Client-Auth-ID. It can be used to distinguish tunnels. An empty string specifies that the value of the object tmnxL2tpLocalName is used." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.9." DEFVAL { ''H } ::= { tmnxL2tpTgCfgEntry 15 } tmnxL2tpTgCfgDoChallenge OBJECT-TYPE SYNTAX TmnxL2tpDoChallenge MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgDoChallenge specifies when challenge-response is to be used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpDoChallenge." DEFVAL { default } ::= { tmnxL2tpTgCfgEntry 16 } tmnxL2tpTgCfgReceiveWindowSize OBJECT-TYPE SYNTAX TmnxL2tpReceiveWindowSize MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgReceiveWindowSize specifies the Receive Window Size of the tunnels in this L2TP Tunnel Group. The value zero specifies that the value must be set to the actual value of the object tmnxL2tpReceiveWindowSize." DEFVAL { 0 } ::= { tmnxL2tpTgCfgEntry 17 } tmnxL2tpTgCfgIsaGrpId OBJECT-TYPE SYNTAX TmnxL2tpIsaGrpIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgIsaGrpId specifies the L2TP Integrated Service Adaptor group for the tunnels in this L2TP Tunnel Group." DEFVAL { 0 } ::= { tmnxL2tpTgCfgEntry 19 } tmnxL2tpTgCfgAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgAddrType specifies the address type of tmnxL2tpTgCfgAddr. The value 'unknown' specifies that the value must be set to the actual value of the object tmnxL2tpAddrType." DEFVAL { unknown } ::= { tmnxL2tpTgCfgEntry 20 } tmnxL2tpTgCfgAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgCfgAddr specifies the local IP address of the tunnels in this L2TP Tunnel Group. The value ''H specifies that the value must be set to the actual value of the object tmnxL2tpAddr." DEFVAL { ''H } ::= { tmnxL2tpTgCfgEntry 21 } tmnxL2tpTgCfgLoadBalanceMethod OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaLoadBalanceMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgLoadBalanceMethod specifies the method to be used for load-balancing sessions across ISA MDA in this Layer Two Tunneling Protocol Tunnel Group. The value 'default' is not allowed." DEFVAL { perSession } ::= { tmnxL2tpTgCfgEntry 25 } tmnxL2tpTgCfgAccountingPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgAccountingPolicy specifies the RADIUS accounting policy to be used in this Layer Two Tunneling Protocol Tunnel Group. It refers to a conceptual row in the tmnxL2tpApTable. The value of tmnxL2tpTgCfgAccountingPolicy can be overruled by a non-empty value of tmnxL2tpTuCfgAccountingPolicy. An empty string specifies that the value of tmnxL2tpAccountingPolicy must be used." DEFVAL { ''H } ::= { tmnxL2tpTgCfgEntry 26 } tmnxL2tpTgCfgProtocol OBJECT-TYPE SYNTAX TmnxL2tpProtocolVersion MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgProtocol specifies the L2TP protocol version supported in this Layer Two Tunneling Protocol Tunnel Group. The object value can only be changed at LT2P Tunnel Group creation time. Depending this object value, only L2TP V2 or L2TP V3 Tunnel Group objects are applicable. The value 'undefined' is not allowed for this object." DEFVAL { v2 } ::= { tmnxL2tpTgCfgEntry 27 } tmnxL2tpLnsTgPppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsTgPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains objects to configure PPP (Point to Point Protocol) on L2TP LNS Tunnel Groups. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTgCfgObjs 3 } tmnxL2tpLnsTgPppEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsTgPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents PPP information about a Layer Two Tunneling Protocol LNS Tunnel Group." AUGMENTS { tmnxL2tpTgCfgEntry } ::= { tmnxL2tpLnsTgPppTable 1 } TmnxL2tpLnsTgPppEntry ::= SEQUENCE { tmnxL2tpLnsTgPppLastMgmtChange TimeStamp, tmnxL2tpLnsTgPppAuthPlcy TNamedItemOrEmpty, tmnxL2tpLnsTgPppAuthProtocol TmnxL2tpPppAuthentication, tmnxL2tpLnsTgPppUserDb TNamedItemOrEmpty, tmnxL2tpLnsTgPppDefaultService TmnxServId, tmnxL2tpLnsTgPppDefaultGroupIf TNamedItemOrEmpty, tmnxL2tpLnsTgPppProxyLcp TmnxAlwaysOrNever, tmnxL2tpLnsTgPppProxyAuth TmnxAlwaysOrNever, tmnxL2tpLnsTgPppMtu TmnxL2tpPppMtu, tmnxL2tpLnsTgPppLcpKaInterval TmnxL2tpLcpKaInterval, tmnxL2tpLnsTgPppLcpKaHoldUp TmnxL2tpLcpKaHoldUpMplier, tmnxL2tpLnsTgPppIpcpSubnetNeg TmnxAlwaysOrNever, tmnxL2tpLnsTgPppLcpIgnoreMagic TmnxAlwaysOrNever, tmnxL2tpLnsTgPppMinChapChall Unsigned32, tmnxL2tpLnsTgPppMaxChapChall Unsigned32, tmnxL2tpLnsTgPppLcpForceAckAccm TmnxAlwaysOrNever, tmnxL2tpLnsTgPppDefaultSvcName TLNamedItemOrEmpty, tmnxL2tpLnsTgPppRejDisabledNcp TmnxAlwaysOrNever } tmnxL2tpLnsTgPppLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpLnsTgPppEntry 1 } tmnxL2tpLnsTgPppAuthPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTgPppAuthPlcy specifies the authentication policy used by this system for the tunnels in this L2TP LNS Tunnel Group during the authentication phase of tunnel establishment. An empty string specifies that no authentication policy is used." DEFVAL { ''H } ::= { tmnxL2tpLnsTgPppEntry 2 } tmnxL2tpLnsTgPppAuthProtocol OBJECT-TYPE SYNTAX TmnxL2tpPppAuthentication MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTgPppAuthProtocol specifies for the tunnels in this L2TP LNS Tunnel Group what PPP authentication protocol(s) will be negotiated during the LCP phase. The value 'default' is not allowed." DEFVAL { prefChap } ::= { tmnxL2tpLnsTgPppEntry 3 } tmnxL2tpLnsTgPppUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTgPppUserDb specifies the local user database to use for PADI or PPP PAP/CHAP based authentication during the authentication phase of tunnel establishment. An empty string specifies that no local user database is used." DEFVAL { ''H } ::= { tmnxL2tpLnsTgPppEntry 4 } tmnxL2tpLnsTgPppDefaultService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppDefaultService specifies the service ID of the service where the PPP sessions are established when the authentication server does not specify the service ID." DEFVAL { 0 } ::= { tmnxL2tpLnsTgPppEntry 5 } tmnxL2tpLnsTgPppDefaultGroupIf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppDefaultGroupIf specifies the group interface where the PPP sessions are established when the authentication server does not specify the group interface." DEFVAL { "" } ::= { tmnxL2tpLnsTgPppEntry 6 } tmnxL2tpLnsTgPppProxyLcp OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppProxyLcp specifies if this system reuses the result of the Link Control Protocol (LCP) negotiation done by the proxy (LAC). If the value of this object is 'always', the Proxy LCP AVPs received from the LAC are used to initiate the LCP on this system. If the value of this object is 'never', this system restarts the LCP negotiation with the remote system." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.5 Proxy LCP and Authentication AVPs." DEFVAL { never } ::= { tmnxL2tpLnsTgPppEntry 7 } tmnxL2tpLnsTgPppProxyAuth OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppProxyAuth specifies if this system reuses the authentication done by the proxy (LAC). If the value of this object is 'always', the Authentication AVPs received from the LAC are accepted. If the value of this object is 'never', this system restarts the authentication of the remote system." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.5 Proxy LCP and Authentication AVPs." DEFVAL { never } ::= { tmnxL2tpLnsTgPppEntry 8 } tmnxL2tpLnsTgPppMtu OBJECT-TYPE SYNTAX TmnxL2tpPppMtu MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppMtu specifies the MTU (Maximum Transmission Unit) for the tunnels in this L2TP LNS Tunnel Group. The value zero is not allowed." DEFVAL { 1500 } ::= { tmnxL2tpLnsTgPppEntry 9 } tmnxL2tpLnsTgPppLcpKaInterval OBJECT-TYPE SYNTAX TmnxL2tpLcpKaInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppLcpKaInterval specifies for the tunnels in this L2TP LNS Tunnel Group the time interval in seconds at which LCP echo requests are transmitted. The value '0' is not allowed." DEFVAL { 30 } ::= { tmnxL2tpLnsTgPppEntry 10 } tmnxL2tpLnsTgPppLcpKaHoldUp OBJECT-TYPE SYNTAX TmnxL2tpLcpKaHoldUpMplier MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppLcpKaHoldUp specifies for the tunnels in this L2TP LNS Tunnel Group how many LCP keepalive messages can be missed before the related session is brought down. The value '0' is not allowed." DEFVAL { 3 } ::= { tmnxL2tpLnsTgPppEntry 11 } tmnxL2tpLnsTgPppIpcpSubnetNeg OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppIpcpSubnetNeg specifies for the tunnels in this L2TP LNS Tunnel Group if IPCP subnet negotiation is enabled." DEFVAL { never } ::= { tmnxL2tpLnsTgPppEntry 13 } tmnxL2tpLnsTgPppLcpIgnoreMagic OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppLcpIgnoreMagic specifies for the tunnels in this L2TP LNS Tunnel Group if checking the Magic-Number field in LCP Echo-Request and Echo-Reply messages is skipped. If the value of tmnxL2tpLnsTgPppLcpIgnoreMagic is equal to 'never', checking is performed. If the value of tmnxL2tpLnsTgPppLcpIgnoreMagic is equal to 'always', checking is not performed." REFERENCE "RFC 1661 PPP section 6.4. Magic-Number." DEFVAL { never } ::= { tmnxL2tpLnsTgPppEntry 20 } tmnxL2tpLnsTgPppMinChapChall OBJECT-TYPE SYNTAX Unsigned32 (8..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppMinChapChall specifies the minimum length of the CHAP challenge generated by the system. Set the value of this object together with the value of tmnxL2tpLnsTgPppMaxChapChall. The value of tmnxL2tpLnsTgPppMaxChapChall must be equal to zero while the value of this object is equal to zero." DEFVAL { 32 } ::= { tmnxL2tpLnsTgPppEntry 21 } tmnxL2tpLnsTgPppMaxChapChall OBJECT-TYPE SYNTAX Unsigned32 (8..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppMaxChapChall specifies the maximum length of the CHAP challenge generated by the system. Set the value of this object together with the value of tmnxL2tpLnsTgPppMinChapChall. The value of tmnxL2tpLnsTgPppMinChapChall must be equal to zero while the value of this object is equal to zero." DEFVAL { 64 } ::= { tmnxL2tpLnsTgPppEntry 22 } tmnxL2tpLnsTgPppLcpForceAckAccm OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppLcpForceAckAccm specifies for the tunnels in this L2TP LNS Tunnel Group if this system acknowledges the LCP Asynchronous Control Character Map (ACCM) configuration option during the LCP negotiation phase; in this case, though the system acknowledges the ACCM option, it actually ignores it." DEFVAL { never } ::= { tmnxL2tpLnsTgPppEntry 23 } tmnxL2tpLnsTgPppDefaultSvcName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppDefaultSvcName specifies the name of the service where the PPP sessions are established when the authentication server does not specify the service ID." DEFVAL { "" } ::= { tmnxL2tpLnsTgPppEntry 24 } tmnxL2tpLnsTgPppRejDisabledNcp OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTgPppRejDisabledNcp specifies for the tunnels in this L2TP LNS Tunnel Group whether disabled NCP's (Network Control Protocol) are rejected or silently ignored. When the value of this object is set to 'always(3)' then disabled NCP's are rejected explicitly." DEFVAL { never } ::= { tmnxL2tpLnsTgPppEntry 25 } tmnxL2tpTgMlpppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTgMlpppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains objects to configure MLPPP (Multi Link Point to Point Protocol) on L2TP Tunnel Groups. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTgCfgObjs 4 } tmnxL2tpTgMlpppEntry OBJECT-TYPE SYNTAX TmnxL2tpTgMlpppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents MLPPP information about a Layer Two Tunneling Protocol LNS Tunnel Group." AUGMENTS { tmnxL2tpTgCfgEntry } ::= { tmnxL2tpTgMlpppTable 1 } TmnxL2tpTgMlpppEntry ::= SEQUENCE { tmnxL2tpTgMlpppLastMgmtChange TimeStamp, tmnxL2tpTgMlpppAdminState TmnxAdminState, tmnxL2tpTgMlpppMaxLinks Unsigned32, tmnxL2tpTgMlpppInterleave TmnxAlwaysOrNever, tmnxL2tpTgMlpppMaxFragDelay TmnxL2tpMlpppMaxFragDelay, tmnxL2tpTgMlpppReassemblyTo TmnxL2tpMlpppReassemblyTimeout, tmnxL2tpTgMlpppShortSeqNumberRx TmnxAlwaysOrNever, tmnxL2tpTgMlpppEpClass TmnxL2tpMlpppEndpointClass, tmnxL2tpTgMlpppEpIpv4Address OCTET STRING, tmnxL2tpTgMlpppEpMacAddress MacAddress } tmnxL2tpTgMlpppLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpTgMlpppEntry 1 } tmnxL2tpTgMlpppAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppAdminState specifies the administrative state of MLPPP for this Layer Two Tunneling Protocol Tunnel Group." DEFVAL { outOfService } ::= { tmnxL2tpTgMlpppEntry 2 } tmnxL2tpTgMlpppMaxLinks OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgMlpppMaxLinks specifies the maximum number of MLPPP links. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { 1 } ::= { tmnxL2tpTgMlpppEntry 3 } tmnxL2tpTgMlpppInterleave OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppInterleave specifies if this system applies Link Fragmentation and Interleaving to the traffic sent from the LNS to the LAC. If the value of this object is 'always', downstream traffic is fragmented and interleaved, meaning that (non-fragmented) realtime traffic is interleaved with fragments of non-realtime traffic. If the value of this object is 'never', downstream traffic is only fragmented but not reordered according to priority. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { never } ::= { tmnxL2tpTgMlpppEntry 4 } tmnxL2tpTgMlpppMaxFragDelay OBJECT-TYPE SYNTAX TmnxL2tpMlpppMaxFragDelay UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppMaxFragDelay specifies the maximum delay for fragments for the tunnels in this L2TP LNS Tunnel Group. The value zero means 'no fragmentation'. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { 0 } ::= { tmnxL2tpTgMlpppEntry 5 } tmnxL2tpTgMlpppReassemblyTo OBJECT-TYPE SYNTAX TmnxL2tpMlpppReassemblyTimeout (100 | 1000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppReassemblyTo specifies the reassembly timeout for fragments for the tunnels in this L2TP LNS Tunnel Group. The value zero is not allowed. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { 1000 } ::= { tmnxL2tpTgMlpppEntry 6 } tmnxL2tpTgMlpppShortSeqNumberRx OBJECT-TYPE SYNTAX TmnxAlwaysOrNever MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppShortSeqNumberRx specifies if this system requests to receive short sequence numbers from the peer. If the value of this object is 'always', this system includes the Short Sequence Number Header Format Option in its LCP configuration options. If the value of this object is 'never', this system does not includes the Short Sequence Number Header Format Option in its LCP configuration options. The value of this object is only relevant for tunnels where this system performs the LNS role." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP) section 5.1.2." DEFVAL { never } ::= { tmnxL2tpTgMlpppEntry 7 } tmnxL2tpTgMlpppEpClass OBJECT-TYPE SYNTAX TmnxL2tpMlpppEndpointClass MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppEpClass specifies the type of endpoint. If the value of 'tmnxL2tpTgMlpppEpClass' is equal to 'ipv4Address', the address for the MLPPP Endpoint Discriminator Option is taken from tmnxL2tpTgMlpppEpIpv4Address. If the value of 'tmnxL2tpTgMlpppEpClass' is equal to 'macAddress', the address for the MLPPP Endpoint Discriminator Option is taken from tmnxL2tpTgMlpppEpMacAddress. If the value of 'tmnxL2tpTgMlpppEpClass' is equal to 'default', the MLPPP Endpoint Discriminator Option must not be transmitted. A value other than 'default' is only relevant for tunnels where this system performs the LNS role." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." DEFVAL { default } ::= { tmnxL2tpTgMlpppEntry 8 } tmnxL2tpTgMlpppEpIpv4Address OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppEpIpv4Address specifies the class 2 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTgMlpppEpClass is equal to 'ipv4Address', a value of all zeroes specifies that the system IP address be used; otherwise, it means that no address is specified." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." DEFVAL { '00000000'H } ::= { tmnxL2tpTgMlpppEntry 9 } tmnxL2tpTgMlpppEpMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgMlpppEpMacAddress specifies the class 3 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTgMlpppEpClass is equal to 'macAddress', a value of all zeroes specifies that the system MAC address be used; otherwise, it means that no address is specified." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." DEFVAL { '000000000000'H } ::= { tmnxL2tpTgMlpppEntry 10 } tmnxL2tpTgXtTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTgXtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Extended Tunnel configuration table contains more objects to configure L2TP Tunnel Groups. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTgCfgObjs 5 } tmnxL2tpTgXtEntry OBJECT-TYPE SYNTAX TmnxL2tpTgXtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents information about a Layer Two Tunneling Protocol Tunnel Group." AUGMENTS { tmnxL2tpTgCfgEntry } ::= { tmnxL2tpTgXtTable 1 } TmnxL2tpTgXtEntry ::= SEQUENCE { tmnxL2tpTgXtLastMgmtChange TimeStamp, tmnxL2tpTgXtDfBitLac TmnxAlwaysNeverOrDefault, tmnxL2tpTgXtFoRecoveryMethod TmnxL2tpFailoverRecoveryMethod, tmnxL2tpTgXtFoRecoveryTime TmnxL2tpFailoverRecoveryTime } tmnxL2tpTgXtLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpTgXtEntry 1 } tmnxL2tpTgXtDfBitLac OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTgXtDfBitLac specifies if this system applies Link Fragmentation and Interleaving to the traffic sent from the LNS to the LAC. If the value of this object is 'always', downstream traffic is fragmented and interleaved, meaning that (non-fragmented) realtime traffic is interleaved with fragments of non-realtime traffic. If the value of this object is 'never', downstream traffic is only fragmented but not reordered according to priority. The value 'default' specifies that the actual value must be used of the object tmnxL2tpXtDfBitLac. The value of this object is only relevant for tunnels where this system performs the LAC role." DEFVAL { default } ::= { tmnxL2tpTgXtEntry 4 } tmnxL2tpTgXtFoRecoveryMethod OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP tunnels and sessions associated with this tunnel group between this system (performing the LAC role) and its failover peer. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpXtFoRecoveryMethod." DEFVAL { default } ::= { tmnxL2tpTgXtEntry 5 } tmnxL2tpTgXtFoRecoveryTime OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryTime MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTgXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpXtFoRecoveryTime." DEFVAL { -2 } ::= { tmnxL2tpTgXtEntry 6 } tmnxL2tpV3TgTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpV3TgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP V3 Tunnel configuration table contains objects to configure L2TP V3 Tunnel Groups. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTgCfgObjs 6 } tmnxL2tpV3TgEntry OBJECT-TYPE SYNTAX TmnxL2tpV3TgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents information about a Layer Two Tunneling Protocol V3 Tunnel Group. Conceptual rows that correspond to V2 Tunnel Groups are immutable and can have attribute values that differ from the default values." AUGMENTS { tmnxL2tpTgCfgEntry } ::= { tmnxL2tpV3TgTable 1 } TmnxL2tpV3TgEntry ::= SEQUENCE { tmnxL2tpV3TgLastCh TimeStamp, tmnxL2tpV3TgCookieLen TmnxL2tpCookieLength, tmnxL2tpV3TgDigestType TmnxL2tpDigestType, tmnxL2tpV3TgNonceLen TmnxL2tpNonceLength, tmnxL2tpV3TgPwCapList TmnxL2tpConfPwType, tmnxL2tpV3TgReconnectTimeout TmnxL2tpReconnectTimeout, tmnxL2tpV3TgRemRtrId OCTET STRING, tmnxL2tpV3TgTrackPassChng TruthValue, tmnxL2tpV3TgSecret TmnxL2tpAuthSecret, tmnxL2tpV3TgPubTcpMssAdjust Integer32, tmnxL2tpV3TgPrivTcpMssAdjust Integer32 } tmnxL2tpV3TgLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TgLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpV3TgEntry 1 } tmnxL2tpV3TgCookieLen OBJECT-TYPE SYNTAX TmnxL2tpCookieLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgCookieLen specifies the length of the cookie added to the outgoing data messages of the L2TP session." DEFVAL { -2 } ::= { tmnxL2tpV3TgEntry 2 } tmnxL2tpV3TgDigestType OBJECT-TYPE SYNTAX TmnxL2tpDigestType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgDigestType specifies the digest type to be used in the Message Digest AVP of the outgoing control messages of the L2TP tunnel." DEFVAL { default } ::= { tmnxL2tpV3TgEntry 3 } tmnxL2tpV3TgNonceLen OBJECT-TYPE SYNTAX TmnxL2tpNonceLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgNonceLen specifies the length of the nonce in the Control Message Authentication Nonce AVP added to outgoing control messages." DEFVAL { -2 } ::= { tmnxL2tpV3TgEntry 4 } tmnxL2tpV3TgPwCapList OBJECT-TYPE SYNTAX TmnxL2tpConfPwType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgPwCapList specifies the Pseudo Wire capture list type(s) to be accepted in the incoming control messages of the L2TP tunnel." DEFVAL { {} } ::= { tmnxL2tpV3TgEntry 5 } tmnxL2tpV3TgReconnectTimeout OBJECT-TYPE SYNTAX TmnxL2tpReconnectTimeout UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgReconnectTimeout specifies the time the ethernet tunnel client of L2TP waits before a retry of the session after session setup failed or the session was closed." DEFVAL { -2 } ::= { tmnxL2tpV3TgEntry 6 } tmnxL2tpV3TgRemRtrId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgRemRtrId specifies the router-id that is expected in the incoming control messages of the L2TP tunnel. An address 0.0.0.0 means that the router-id in the incoming control messages is not checked." DEFVAL { '00000000'H } ::= { tmnxL2tpV3TgEntry 7 } tmnxL2tpV3TgTrackPassChng OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgTrackPassChng specifies the tracking of a password change for the L2TP tunnel." DEFVAL { false } ::= { tmnxL2tpV3TgEntry 8 } tmnxL2tpV3TgSecret OBJECT-TYPE SYNTAX TmnxL2tpAuthSecret MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpV3TgSecret specifies the password to be used for AVP hiding and digest calculation for the tunnels in the Layer Two Tunneling Protocol V3 and V3draft Tunnel Group. This value overrules the value of the object tmnxL2tpV3Secret of the virtual router this tunnel group belongs to. This object will always return an empty string on a read." DEFVAL { ''H } ::= { tmnxL2tpV3TgEntry 9 } tmnxL2tpV3TgPubTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-2 | -1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgPubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet packet. A value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. A value of '-2' specifies that the TCP MSS must be derived from the MSS (i.e., tmnxL2tpV3PubTcpMssAdjust) of the associated virtual router. When the system receives a TCP SYN packet from the public network and the packet contains an MSS option, the system replaces the MSS option value with tmnxL2tpV3TgPubTcpMssAdjust when the value of tmnxL2tpV3TgPubTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the public network and the packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxL2tpV3TgPubTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -2 } ::= { tmnxL2tpV3TgEntry 10 } tmnxL2tpV3TgPrivTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-2 | -1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpV3TgPrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the private network to the public network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet packet. A value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. A value of '-2' specifies that the TCP MSS must be derived from the MSS (i.e., tmnxL2tpV3PrivTcpMssAdjust) of the associated virtual router. When the system receives a TCP SYN packet from the private network and the packet contains an MSS option, the system replaces the MSS option value with tmnxL2tpV3TgPrivTcpMssAdjust when the value of tmnxL2tpV3TgPrivTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the private network and the packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxL2tpV3TgPrivTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -2 } ::= { tmnxL2tpV3TgEntry 11 } tmnxL2tpTgStatObjs OBJECT IDENTIFIER ::= { tmnxL2tpTgObjs 2 } tmnxL2tpTgStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTgStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTgStatTable contains status and statistics information about Layer Two Tunneling Protocol Tunnel Groups. The tmnxL2tpTgStatTable has an entry for each L2TP Tunnel Group." ::= { tmnxL2tpTgStatObjs 1 } tmnxL2tpTgStatEntry OBJECT-TYPE SYNTAX TmnxL2tpTgStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains status and statistics about a L2TP tunnel group. Rows are created or removed automatically by the system." INDEX { vRtrID, tmnxL2tpTgStatName } ::= { tmnxL2tpTgStatTable 1 } TmnxL2tpTgStatEntry ::= SEQUENCE { tmnxL2tpTgStatName TmnxL2tpTunnelGroupName, tmnxL2tpTgStatState TmnxL2tpTgOperState, tmnxL2tpTgStatCleared TimeStamp, tmnxL2tpTgStatTotalTunnels Counter32, tmnxL2tpTgStatFailedTunnels Counter32, tmnxL2tpTgStatFailedTuAuth Counter32, tmnxL2tpTgStatActiveTunnels Gauge32, tmnxL2tpTgStatTunnels Gauge32, tmnxL2tpTgStatTotalSessions Counter32, tmnxL2tpTgStatFailedSessions Counter32, tmnxL2tpTgStatActiveSessions Gauge32, tmnxL2tpTgStatSessions Gauge32, tmnxL2tpTgStatControlRxOctets CounterBasedGauge64, tmnxL2tpTgStatControlRxOctetsLw Gauge32, tmnxL2tpTgStatControlRxOctetsHw Gauge32, tmnxL2tpTgStatControlRxPkts Gauge32, tmnxL2tpTgStatControlTxOctets CounterBasedGauge64, tmnxL2tpTgStatControlTxOctetsLw Gauge32, tmnxL2tpTgStatControlTxOctetsHw Gauge32, tmnxL2tpTgStatControlTxPkts Gauge32, tmnxL2tpTgStatErrorTxPkts Gauge32, tmnxL2tpTgStatErrorRxPkts Gauge32, tmnxL2tpTgStatSessionLimit Gauge32, tmnxL2tpTgStatSeAssignMethod TmnxL2tpSessionAssignMethod, tmnxL2tpTgStatOperSessionLimit TmnxL2tpSessionLimit } tmnxL2tpTgStatName OBJECT-TYPE SYNTAX TmnxL2tpTunnelGroupName MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpTgStatName indicates the string to identify this Layer Two Tunneling Protocol Tunnel Group." ::= { tmnxL2tpTgStatEntry 1 } tmnxL2tpTgStatState OBJECT-TYPE SYNTAX TmnxL2tpTgOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatState indicates the operational state of this Layer Two Tunneling Protocol Tunnel Group." ::= { tmnxL2tpTgStatEntry 2 } tmnxL2tpTgStatCleared OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTgStatCleared indicates the value of sysUpTime when the tunnel group statistics were cleared. The value zero indicates that the statistics have not been cleared since the last re-initialization of the local network management subsystem." ::= { tmnxL2tpTgStatEntry 3 } tmnxL2tpTgStatTotalTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatTotalTunnels indicates the total number of tunnel set up attempts in this tunnel group since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpTgStatEntry 4 } tmnxL2tpTgStatFailedTunnels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatFailedTunnels indicates the number of tunnels in this tunnel group since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpTgStatEntry 5 } tmnxL2tpTgStatFailedTuAuth OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatFailedTuAuth indicates the number of tunnels in this tunnel group that failed authentication since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpTgStatEntry 6 } tmnxL2tpTgStatActiveTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatActiveTunnels indicates the number of tunnels currently established in this tunnel group." ::= { tmnxL2tpTgStatEntry 7 } tmnxL2tpTgStatTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatTunnels indicates the actual number of tunnels in this tunnel group." ::= { tmnxL2tpTgStatEntry 8 } tmnxL2tpTgStatTotalSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatTotalSessions indicates the number of session creation attempts in this tunnel group since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpTgStatEntry 9 } tmnxL2tpTgStatFailedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatFailedSessions indicates the number of sessions in this tunnel group that failed to reach the established state since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared." ::= { tmnxL2tpTgStatEntry 10 } tmnxL2tpTgStatActiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatActiveSessions indicates the number of sessions currently established in this tunnel group." ::= { tmnxL2tpTgStatEntry 11 } tmnxL2tpTgStatSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatSessions indicates the actual number of sessions in this tunnel group." ::= { tmnxL2tpTgStatEntry 12 } tmnxL2tpTgStatControlRxOctets OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlRxOctets indicates the number of control channel octets received by the current tunnels in this tunnel group." ::= { tmnxL2tpTgStatEntry 13 } tmnxL2tpTgStatControlRxOctetsLw OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlRxOctetsLw indicates the lower 32-bits word of the value of tmnxL2tpTgStatControlRxOctets." ::= { tmnxL2tpTgStatEntry 14 } tmnxL2tpTgStatControlRxOctetsHw OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlRxOctetsHw indicates the higher 32-bits word of the value of tmnxL2tpTgStatControlRxOctets." ::= { tmnxL2tpTgStatEntry 15 } tmnxL2tpTgStatControlRxPkts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlRxPkts indicates the accumulated number of control packets received by the current tunnels in this tunnel group." ::= { tmnxL2tpTgStatEntry 16 } tmnxL2tpTgStatControlTxOctets OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlTxOctets indicates the accumulated number of control channel octets that were transmitted to the current tunnel endpoints in this tunnel group." ::= { tmnxL2tpTgStatEntry 17 } tmnxL2tpTgStatControlTxOctetsLw OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlTxOctetsLw indicates the lower 32-bits word of the value of tmnxL2tpTgStatControlTxOctets." ::= { tmnxL2tpTgStatEntry 18 } tmnxL2tpTgStatControlTxOctetsHw OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlTxOctetsHw indicates the higher 32-bits word of the value of tmnxL2tpTgStatControlTxOctets." ::= { tmnxL2tpTgStatEntry 19 } tmnxL2tpTgStatControlTxPkts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatControlTxPkts indicates the accumulated number of control packets that were transmitted to the current tunnel endpoints in this tunnel group." ::= { tmnxL2tpTgStatEntry 20 } tmnxL2tpTgStatErrorTxPkts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatErrorTxPkts indicates the accumulated number of packet transmission errors on the current tunnels in this tunnel group." ::= { tmnxL2tpTgStatEntry 21 } tmnxL2tpTgStatErrorRxPkts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatErrorRxPkts indicates the accumulated number of errored packets that were received on the current tunnels in this tunnel group." ::= { tmnxL2tpTgStatEntry 22 } tmnxL2tpTgStatSessionLimit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatSessionLimit indicates the configured session limit of this tunnel group." ::= { tmnxL2tpTgStatEntry 23 } tmnxL2tpTgStatSeAssignMethod OBJECT-TYPE SYNTAX TmnxL2tpSessionAssignMethod MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTgStatSeAssignMethod indicates the latest actual method used for the authentication of the tunnels in this Layer Two Tunneling Protocol Tunnel Group. Note that the next tunnel that will be set up in this L2TP tunnel group may or may not use the same method, since the configuration of the RADIUS server may have changed in the meantime." ::= { tmnxL2tpTgStatEntry 24 } tmnxL2tpTgStatOperSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTgStatOperSessionLimit indicates the operational session limit of this tunnel group." ::= { tmnxL2tpTgStatEntry 25 } tmnxL2tpTgTuTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTgTuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTgTuTable contains the set of active tunnels for each L2TP Tunnel Group." ::= { tmnxL2tpTgStatObjs 2 } tmnxL2tpTgTuEntry OBJECT-TYPE SYNTAX TmnxL2tpTgTuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains a tunnel identifier of a L2TP tunnel group. Rows are created or removed automatically by the system." INDEX { vRtrID, tmnxL2tpTgStatName, tmnxL2tpTgTuId } ::= { tmnxL2tpTgTuTable 1 } TmnxL2tpTgTuEntry ::= SEQUENCE { tmnxL2tpTgTuId TmnxL2tpConnectionId } tmnxL2tpTgTuId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTgTuId indicates the local identifier of a Layer Two Tunneling Protocol Tunnel. In L2TP version 2, it is the 16-bit tunnel ID. In L2TP version 3, it is equal to the most significant 16-bit of the control connection ID." ::= { tmnxL2tpTgTuEntry 1 } tmnxL2tpTgOpObjs OBJECT IDENTIFIER ::= { tmnxL2tpTgObjs 3 } tmnxL2tpTgDrainTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTgDrainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTgDrainTable has an entry for each active Layer Two Tunneling Protocol Tunnel Group." ::= { tmnxL2tpTgOpObjs 1 } tmnxL2tpTgDrainEntry OBJECT-TYPE SYNTAX TmnxL2tpTgDrainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row presents an operations interface to drain a Layer Two Tunneling Protocol Tunnel Group. After a successful drain operation, the value of the object tmnxL2tpTgStatState of this tunnel group is equal to 'drain', and the value of the object tmnxL2tpTuStatusState is equal to 'draining' for all the tunnels of this L2TP tunnel group; none of these tunnels accept or establish new connections, while existing connections are timing out. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpTgStatEntry } ::= { tmnxL2tpTgDrainTable 1 } TmnxL2tpTgDrainEntry ::= SEQUENCE { tmnxL2tpTgDrain TmnxL2tpActionTypeDrain } tmnxL2tpTgDrain OBJECT-TYPE SYNTAX TmnxL2tpActionTypeDrain MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'drain (0)' triggers an attempt to drain this L2TP tunnel group. Setting it to 'stopDrain (1)' stops the draining. Reading this object returns the value 'notApplicable'." DEFVAL { notApplicable } ::= { tmnxL2tpTgDrainEntry 1 } tmnxL2tpTunnelObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 3 } tmnxL2tpTuCfgObjs OBJECT IDENTIFIER ::= { tmnxL2tpTunnelObjs 1 } tmnxL2tpTuCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains objects to configure L2TP Tunnels." ::= { tmnxL2tpTuCfgObjs 2 } tmnxL2tpTuCfgEntry OBJECT-TYPE SYNTAX TmnxL2tpTuCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Tunnel. Entries in this table can be created or deleted via SNMP operations." INDEX { vRtrID, tmnxL2tpTgCfgName, tmnxL2tpTuCfgName } ::= { tmnxL2tpTuCfgTable 1 } TmnxL2tpTuCfgEntry ::= SEQUENCE { tmnxL2tpTuCfgName TNamedItem, tmnxL2tpTuCfgRowStatus RowStatus, tmnxL2tpTuCfgLastMgmtChange TimeStamp, tmnxL2tpTuCfgDescription TItemDescription, tmnxL2tpTuCfgAdminState TmnxAdminState, tmnxL2tpTuCfgPreference TmnxL2tpTunnelPreference, tmnxL2tpTuCfgPeerAddrType InetAddressType, tmnxL2tpTuCfgPeerAddr InetAddress, tmnxL2tpTuCfgAddrType InetAddressType, tmnxL2tpTuCfgAddr InetAddress, tmnxL2tpTuCfgLocalName TmnxL2tpHostNameOrEmpty, tmnxL2tpTuCfgRemoteName TmnxL2tpHostNameOrEmpty, tmnxL2tpTuCfgSecret TmnxL2tpAuthSecret, tmnxL2tpTuCfgHelloInterval TmnxL2tpTunnelHelloInterval, tmnxL2tpTuCfgIdleTO TmnxL2tpTunnelIdleTO, tmnxL2tpTuCfgDestructTO TmnxL2tpTunnelDestructTO, tmnxL2tpTuCfgMaxRetxEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTuCfgMaxRetxNotEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTuCfgSessionLimit TmnxL2tpSessionLimit, tmnxL2tpTuCfgAvpHiding TmnxL2tpAvpHidingMode, tmnxL2tpTuCfgAutoEstab TruthValue, tmnxL2tpTuCfgDoChallenge TmnxL2tpDoChallenge, tmnxL2tpTuCfgReceiveWindowSize TmnxL2tpReceiveWindowSize, tmnxL2tpTuCfgIsaGrpId TmnxL2tpIsaGrpIdOrZero, tmnxL2tpTuCfgLoadBalanceMethod TmnxL2tpIsaMdaLoadBalanceMethod, tmnxL2tpTuCfgAccountingPolicy TNamedItemOrEmpty } tmnxL2tpTuCfgName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgName specifies the name of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuCfgEntry 1 } tmnxL2tpTuCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgRowStatus specifies the row status of this row." ::= { tmnxL2tpTuCfgEntry 2 } tmnxL2tpTuCfgLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpTuCfgEntry 3 } tmnxL2tpTuCfgDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgDescription specifies the description of this Layer Two Tunneling Protocol Tunnel." DEFVAL { "" } ::= { tmnxL2tpTuCfgEntry 4 } tmnxL2tpTuCfgAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgAdminState specifies the administrative state of this Layer Two Tunneling Protocol Tunnel." DEFVAL { outOfService } ::= { tmnxL2tpTuCfgEntry 5 } tmnxL2tpTuCfgPreference OBJECT-TYPE SYNTAX TmnxL2tpTunnelPreference MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgPreference specifies the preference of this Layer Two Tunneling Protocol Tunnel. The value '0' corresponds to the highest preference." DEFVAL { 50 } ::= { tmnxL2tpTuCfgEntry 6 } tmnxL2tpTuCfgPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgPeerAddrType specifies the address type of tmnxL2tpTuCfgPeerAddr." DEFVAL { unknown } ::= { tmnxL2tpTuCfgEntry 7 } tmnxL2tpTuCfgPeerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgPeerAddr specifies the IP address of the peer." DEFVAL { ''H } ::= { tmnxL2tpTuCfgEntry 8 } tmnxL2tpTuCfgAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgAddrType specifies the address type of tmnxL2tpTuCfgAddr. The value 'unknown' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgAddrType." DEFVAL { unknown } ::= { tmnxL2tpTuCfgEntry 9 } tmnxL2tpTuCfgAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgAddr specifies the local IP address of this Layer Two Tunneling Protocol Tunnel. The value ''H specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgAddr." DEFVAL { ''H } ::= { tmnxL2tpTuCfgEntry 10 } tmnxL2tpTuCfgLocalName OBJECT-TYPE SYNTAX TmnxL2tpHostNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgLocalName specifies the host name used by this system during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Client-Auth-ID. It can be used to distinguish tunnels. An empty string specifies that the value of the object tmnxL2tpTgCfgLocalName is used." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.9." DEFVAL { ''H } ::= { tmnxL2tpTuCfgEntry 11 } tmnxL2tpTuCfgRemoteName OBJECT-TYPE SYNTAX TmnxL2tpHostNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgRemoteName specifies a string to be compared to the host name used by the tunnel peer during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Server-Auth-ID. It can be used to distinguish tunnels." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.10." DEFVAL { ''H } ::= { tmnxL2tpTuCfgEntry 12 } tmnxL2tpTuCfgSecret OBJECT-TYPE SYNTAX TmnxL2tpAuthSecret MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgSecret specifies the password to be used for the authentication of this Layer Two Tunneling Protocol Tunnel. This value overrules the value of the object tmnxL2tpTgCfgSecret of the tunnel group this tunnel belongs to. This object will always return an empty string on a read." DEFVAL { ''H } ::= { tmnxL2tpTuCfgEntry 13 } tmnxL2tpTuCfgHelloInterval OBJECT-TYPE SYNTAX TmnxL2tpTunnelHelloInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgHelloInterval specifies the time interval between two consecutive tunnel Hello messages. A value of '-1' specifies that the keepalive function is disabled. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgHelloInterval." DEFVAL { -2 } ::= { tmnxL2tpTuCfgEntry 14 } tmnxL2tpTuCfgIdleTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelIdleTO UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgIdleTO specifies the period of time that an established tunnel with no active sessions will persist before being disconnected. A value of -1 leaves the tunnel up indefinitely. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgIdleTO." DEFVAL { -2 } ::= { tmnxL2tpTuCfgEntry 15 } tmnxL2tpTuCfgDestructTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelDestructTO UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgDestructTO specifies the period of time that data of a disconnected tunnel will persist before being removed. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgDestructTO." DEFVAL { -2 } ::= { tmnxL2tpTuCfgEntry 16 } tmnxL2tpTuCfgMaxRetxEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgMaxRetxEstab specifies the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is established, before its control connection goes down." DEFVAL { -2 } ::= { tmnxL2tpTuCfgEntry 17 } tmnxL2tpTuCfgMaxRetxNotEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgMaxRetxNotEstab specifies the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is unestablished, before its control connection goes down." DEFVAL { -2 } ::= { tmnxL2tpTuCfgEntry 18 } tmnxL2tpTuCfgSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgSessionLimit specifies the maximum number of sessions allowed in this Layer Two Tunneling Protocol Tunnel. The number of sessions allowed for a tunnel is currently limited to 65535. The reason is that currently only L2TP version 2 is supported, and version 2 uses a 16 bit number to identify a session. A value equal or higher than 65535 is changed to '-1', which means 'unlimited'. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpTunnelSessionLimit." DEFVAL { -2 } ::= { tmnxL2tpTuCfgEntry 19 } tmnxL2tpTuCfgAvpHiding OBJECT-TYPE SYNTAX TmnxL2tpAvpHidingMode MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgAvpHiding specifies when the H bit in the header of each Attribute Value Pair (AVP) is set for the L2TP control messages related to this Layer Two Tunneling Protocol Tunnel. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgAvpHiding of the tunnel group this tunnel belongs to." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.3 Hiding of AVP Attribute Values." DEFVAL { default } ::= { tmnxL2tpTuCfgEntry 20 } tmnxL2tpTuCfgAutoEstab OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgAutoEstab specifies if this Layer Two Tunneling Protocol Tunnel is to be set up automatically by the system." DEFVAL { false } ::= { tmnxL2tpTuCfgEntry 21 } tmnxL2tpTuCfgDoChallenge OBJECT-TYPE SYNTAX TmnxL2tpDoChallenge MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgDoChallenge specifies when challenge-response is to be used for the authentication of this Layer Two Tunneling Protocol Tunnel. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgDoChallenge of the tunnel group this tunnel belongs to." DEFVAL { default } ::= { tmnxL2tpTuCfgEntry 22 } tmnxL2tpTuCfgReceiveWindowSize OBJECT-TYPE SYNTAX TmnxL2tpReceiveWindowSize MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgReceiveWindowSize specifies the Receive Window Size for this Layer Two Tunneling Protocol Tunnel. The value zero specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgReceiveWindowSize." DEFVAL { 0 } ::= { tmnxL2tpTuCfgEntry 23 } tmnxL2tpTuCfgIsaGrpId OBJECT-TYPE SYNTAX TmnxL2tpIsaGrpIdOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuCfgIsaGrpId specifies the L2TP Integrated Service Adaptor group of this Layer Two Tunneling Protocol Tunnel. The value zero specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgIsaGrpId of the tunnel group this tunnel belongs to." DEFVAL { 0 } ::= { tmnxL2tpTuCfgEntry 24 } tmnxL2tpTuCfgLoadBalanceMethod OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaLoadBalanceMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgLoadBalanceMethod specifies the method to be used for load-balancing sessions across ISA MDA in this Layer Two Tunneling Protocol Tunnel. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpTgCfgLoadBalanceMethod of the tunnel group this tunnel belongs to." DEFVAL { default } ::= { tmnxL2tpTuCfgEntry 30 } tmnxL2tpTuCfgAccountingPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgAccountingPolicy specifies the RADIUS accounting policy to be used in this Layer Two Tunneling Protocol Tunnel. It refers to a conceptual row in the tmnxL2tpApTable. An empty string specifies that the value of tmnxL2tpTgCfgAccountingPolicy must be used" DEFVAL { "" } ::= { tmnxL2tpTuCfgEntry 31 } tmnxL2tpLnsTuPppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsTuPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains objects to configure PPP (Point to Point Protocol) on L2TP LNS Tunnels. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTuCfgObjs 3 } tmnxL2tpLnsTuPppEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsTuPppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents PPP information about a Layer Two Tunneling Protocol LNS Tunnel configuration." AUGMENTS { tmnxL2tpTuCfgEntry } ::= { tmnxL2tpLnsTuPppTable 1 } TmnxL2tpLnsTuPppEntry ::= SEQUENCE { tmnxL2tpLnsTuPppLastMgmtChange TimeStamp, tmnxL2tpLnsTuPppAuthPlcy TNamedItemOrEmpty, tmnxL2tpLnsTuPppAuthProtocol TmnxL2tpPppAuthentication, tmnxL2tpLnsTuPppUserDb TNamedItemOrEmpty, tmnxL2tpLnsTuPppDefaultService TmnxServId, tmnxL2tpLnsTuPppDefaultGroupIf TNamedItemOrEmpty, tmnxL2tpLnsTuPppProxyLcp TmnxAlwaysNeverOrDefault, tmnxL2tpLnsTuPppProxyAuth TmnxAlwaysNeverOrDefault, tmnxL2tpLnsTuPppMtu TmnxL2tpPppMtu, tmnxL2tpLnsTuPppLcpKaInterval TmnxL2tpLcpKaInterval, tmnxL2tpLnsTuPppLcpKaHoldUp TmnxL2tpLcpKaHoldUpMplier, tmnxL2tpLnsTuPppIpcpSubnetNeg TmnxAlwaysNeverOrDefault, tmnxL2tpLnsTuPppLcpIgnoreMagic TmnxAlwaysNeverOrDefault, tmnxL2tpLnsTuPppMinChapChall Unsigned32, tmnxL2tpLnsTuPppMaxChapChall Unsigned32, tmnxL2tpLnsTuPppLcpForceAckAccm TmnxAlwaysNeverOrDefault, tmnxL2tpLnsTuPppDefaultSvcName TLNamedItemOrEmpty, tmnxL2tpLnsTuPppRejDisabledNcp TmnxAlwaysNeverOrDefault } tmnxL2tpLnsTuPppLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpLnsTuPppEntry 1 } tmnxL2tpLnsTuPppAuthPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTuPppAuthPlcy specifies the authentication policy used by this system during the authentication phase of session establishment. An empty string specifies that the actual value must be used of the object tmnxL2tpLnsTgPppAuthPlcy of the tunnel group this tunnel configuration belongs to." DEFVAL { ''H } ::= { tmnxL2tpLnsTuPppEntry 2 } tmnxL2tpLnsTuPppAuthProtocol OBJECT-TYPE SYNTAX TmnxL2tpPppAuthentication MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppAuthProtocol specifies what PPP authentication protocol(s) will be negotiated during the LCP phase for the sessions of this tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppAuthProtocol." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 3 } tmnxL2tpLnsTuPppUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTuPppUserDb specifies the local user database to use for PADI or PPP PAP/CHAP based authentication during the authentication phase of session establishment. An empty string specifies that the actual value must be used of the object tmnxL2tpLnsTgPppUserDb of the tunnel group this tunnel configuration belongs to." DEFVAL { ''H } ::= { tmnxL2tpLnsTuPppEntry 4 } tmnxL2tpLnsTuPppDefaultService OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppDefaultService specifies the service ID of the service where the PPP sessions are established when the authentication server does not specify the service ID. The value zero specifies that that the actual value must be used of the object tmnxL2tpLnsTgPppDefaultService. If the value of tmnxL2tpLnsTuPppDefaultService is equal to zero, the value of tmnxL2tpLnsTuPppDefaultGroupIf must also be equal to zero." DEFVAL { 0 } ::= { tmnxL2tpLnsTuPppEntry 5 } tmnxL2tpLnsTuPppDefaultGroupIf OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppDefaultGroupIf specifies the group interface where the PPP sessions are established when the authentication server does not specify the group interface. The empty string specifies that the actual value must be used of the object tmnxL2tpLnsTgPppDefaultGroupIf. If the value of tmnxL2tpLnsTuPppDefaultGroupIf is equal to zero, the value of tmnxL2tpLnsTuPppDefaultService must also be equal to zero and the value of tmnxL2tpLnsTuPppDefaultSvcName must be empty." DEFVAL { "" } ::= { tmnxL2tpLnsTuPppEntry 6 } tmnxL2tpLnsTuPppProxyLcp OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppProxyLcp specifies if this system reuses the result of the Link Control Protocol (LCP) negotiation done by the proxy (LAC). If the value of this object is 'always', the Proxy LCP AVPs received from the LAC are used to initiate the LCP on this system. If the value of this object is 'never', this system restarts the LCP negotiation with the remote system. The value 'default' specifies that the actual value must be used of the object tmnxL2tpLnsTgPppProxyLcp." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.5 Proxy LCP and Authentication AVPs." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 7 } tmnxL2tpLnsTuPppProxyAuth OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppProxyAuth specifies if this system reuses the authentication done by the proxy (LAC). If the value of this object is 'always', the Authentication AVPs received from the LAC are accepted. If the value of this object is 'never', this system restarts the authentication of the remote system. The value 'default' specifies that the actual value must be used of the object tmnxL2tpLnsTgPppProxyAuth." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.5 Proxy LCP and Authentication AVPs." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 8 } tmnxL2tpLnsTuPppMtu OBJECT-TYPE SYNTAX TmnxL2tpPppMtu MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppMtu specifies the MTU (Maximum Transmission Unit) for this tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppMtu." DEFVAL { 0 } ::= { tmnxL2tpLnsTuPppEntry 9 } tmnxL2tpLnsTuPppLcpKaInterval OBJECT-TYPE SYNTAX TmnxL2tpLcpKaInterval UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppLcpKaInterval specifies the time interval in seconds at which LCP echo requests are transmitted for this tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppLcpKaInterval. If the value of tmnxL2tpLnsTuPppLcpKaInterval is equal to zero, the value of tmnxL2tpLnsTuPppLcpKaHoldUp must also be equal to zero." DEFVAL { 0 } ::= { tmnxL2tpLnsTuPppEntry 10 } tmnxL2tpLnsTuPppLcpKaHoldUp OBJECT-TYPE SYNTAX TmnxL2tpLcpKaHoldUpMplier MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppLcpKaHoldUp specifies how many LCP keepalive messages can be missed before the related session is brought down. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppLcpKaHoldUp. If the value of tmnxL2tpLnsTuPppLcpKaHoldUp is equal to zero, the value of tmnxL2tpLnsTuPppLcpKaInterval must also be equal to zero." DEFVAL { 0 } ::= { tmnxL2tpLnsTuPppEntry 11 } tmnxL2tpLnsTuPppIpcpSubnetNeg OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppIpcpSubnetNeg specifies if IPCP subnet negotiation is enabled." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 13 } tmnxL2tpLnsTuPppLcpIgnoreMagic OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppLcpIgnoreMagic specifies if checking the Magic-Number field in LCP Echo-Request and Echo-Reply messages is skipped. If the value of tmnxL2tpLnsTuPppLcpIgnoreMagic is equal to 'never', checking is performed. If the value of tmnxL2tpLnsTuPppLcpIgnoreMagic is equal to 'always', checking is not performed. The value 'default' specifies that the actual value must be used of the object tmnxL2tpLnsTgPppLcpIgnoreMagic." REFERENCE "RFC 1661 PPP section 6.4. Magic-Number." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 14 } tmnxL2tpLnsTuPppMinChapChall OBJECT-TYPE SYNTAX Unsigned32 (0 | 8..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppMinChapChall specifies the minimum length of the CHAP challenge generated by the system. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppMinChapChall. Set the value of this object together with the value of tmnxL2tpLnsTuPppMaxChapChall." DEFVAL { 0 } ::= { tmnxL2tpLnsTuPppEntry 15 } tmnxL2tpLnsTuPppMaxChapChall OBJECT-TYPE SYNTAX Unsigned32 (0 | 8..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppMaxChapChall specifies the maximum length of the CHAP challenge generated by the system. The value zero specifies that the actual value must be used of the object tmnxL2tpLnsTgPppMaxChapChall. Set the value of this object together with the value of tmnxL2tpLnsTuPppMinChapChall." DEFVAL { 0 } ::= { tmnxL2tpLnsTuPppEntry 16 } tmnxL2tpLnsTuPppLcpForceAckAccm OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppLcpForceAckAccm specifies if this system acknowledges the LCP Asynchronous Control Character Map (ACCM) configuration option during the LCP negotiation phase; in this case, though the system acknowledges the ACCM option, it actually ignores it. The value 'default' specifies that the actual value must be used of the object tmnxL2tpLnsTgPppLcpForceAckAccm." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 17 } tmnxL2tpLnsTuPppDefaultSvcName OBJECT-TYPE SYNTAX TLNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppDefaultSvcName specifies the name of the service where the PPP sessions are established when the authentication server does not specify the service ID. An empty string specifies that that the actual value must be used of the object tmnxL2tpLnsTgPppDefaultService. If the value of tmnxL2tpLnsTuPppDefaultSvcName is equal to empty, the value of tmnxL2tpLnsTuPppDefaultGroupIf must also be equal to zero." DEFVAL { "" } ::= { tmnxL2tpLnsTuPppEntry 18 } tmnxL2tpLnsTuPppRejDisabledNcp OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsTuPppRejDisabledNcp specifies whether disabled NCP's (Network Control protocol) are rejected or silently ignored. When the value of this object is set to 'always(3)' then disabled NCP's are rejected explicitly. The value 'default' specifies that the actual value must be used of the object tmnxL2tpLnsTgPppRejDisabledNcp." DEFVAL { default } ::= { tmnxL2tpLnsTuPppEntry 19 } tmnxL2tpTuMlpppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuMlpppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains objects to configure MLPPP on L2TP Tunnels. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTuCfgObjs 4 } tmnxL2tpTuMlpppEntry OBJECT-TYPE SYNTAX TmnxL2tpTuMlpppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents MLPPP information about a Layer Two Tunneling Protocol LNS Tunnel configuration." AUGMENTS { tmnxL2tpTuCfgEntry } ::= { tmnxL2tpTuMlpppTable 1 } TmnxL2tpTuMlpppEntry ::= SEQUENCE { tmnxL2tpTuMlpppLastMgmtChange TimeStamp, tmnxL2tpTuMlpppAdminState TmnxAdminState, tmnxL2tpTuMlpppMaxLinks Unsigned32, tmnxL2tpTuMlpppInterleave TmnxAlwaysNeverOrDefault, tmnxL2tpTuMlpppMaxFragDelay TmnxL2tpMlpppMaxFragDelay, tmnxL2tpTuMlpppReassemblyTo TmnxL2tpMlpppReassemblyTimeout, tmnxL2tpTuMlpppShortSeqNumberRx TmnxAlwaysNeverOrDefault, tmnxL2tpTuMlpppEpClass TmnxL2tpMlpppEndpointClass, tmnxL2tpTuMlpppEpIpv4Address OCTET STRING, tmnxL2tpTuMlpppEpMacAddress MacAddress } tmnxL2tpTuMlpppLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpTuMlpppEntry 1 } tmnxL2tpTuMlpppAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppAdminState specifies the administrative state of MLPPP for this Layer Two Tunneling Protocol Tunnel. The value 'noop' specifies that the actual value must be used of the object tmnxL2tpTgMlpppAdminState of the tunnel group this tunnel configuration belongs to." DEFVAL { noop } ::= { tmnxL2tpTuMlpppEntry 2 } tmnxL2tpTuMlpppMaxLinks OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuMlpppMaxLinks specifies the maximum number of MLPPP links. The value of this object is only relevant for tunnels where this system performs the LNS role. The value zero specifies that the actual value must be used of the object tmnxL2tpTgMlpppMaxLinks of the tunnel group this tunnel configuration belongs to." DEFVAL { 0 } ::= { tmnxL2tpTuMlpppEntry 3 } tmnxL2tpTuMlpppInterleave OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppInterleave specifies if this system applies Link Fragmentation and Interleaving to the traffic sent from the LNS to the LAC. If the value of this object is 'always', downstream traffic is fragmented and interleaved, meaning that (non-fragmented) realtime traffic is interleaved with fragments of non-realtime traffic. If the value of this object is 'never', downstream traffic is only fragmented but not reordered according to priority. The value 'default' specifies that the actual value must be used of the object tmnxL2tpTgMlpppInterleave. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { default } ::= { tmnxL2tpTuMlpppEntry 4 } tmnxL2tpTuMlpppMaxFragDelay OBJECT-TYPE SYNTAX TmnxL2tpMlpppMaxFragDelay UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppMaxFragDelay specifies the maximum delay of fragments for this L2TP Tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpTgMlpppMaxFragDelay of the tunnel group this tunnel configuration belongs to. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { 0 } ::= { tmnxL2tpTuMlpppEntry 5 } tmnxL2tpTuMlpppReassemblyTo OBJECT-TYPE SYNTAX TmnxL2tpMlpppReassemblyTimeout UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppReassemblyTo specifies the reassembly timeout for fragments for this L2TP Tunnel. The value zero specifies that the actual value must be used of the object tmnxL2tpTgMlpppReassemblyTo of the tunnel group this tunnel configuration belongs to. The value of this object is only relevant for tunnels where this system performs the LNS role." DEFVAL { 0 } ::= { tmnxL2tpTuMlpppEntry 6 } tmnxL2tpTuMlpppShortSeqNumberRx OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppShortSeqNumberRx specifies if this system requests to receive short sequence numbers from the peer. If the value of this object is 'always', this system includes the Short Sequence Number Header Format Option in its LCP configuration options. If the value of this object is 'never', this system does not includes the Short Sequence Number Header Format Option in its LCP configuration options. The value of this object is only relevant for tunnels where this system performs the LNS role." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP) section 5.1.2." DEFVAL { default } ::= { tmnxL2tpTuMlpppEntry 7 } tmnxL2tpTuMlpppEpClass OBJECT-TYPE SYNTAX TmnxL2tpMlpppEndpointClass MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppEpClass specifies the type of endpoint. If the value of 'tmnxL2tpTuMlpppEpClass' is equal to 'ipv4Address', the address for the MLPPP Endpoint Discriminator Option is taken from tmnxL2tpTuMlpppEpIpv4Address. If the value of 'tmnxL2tpTuMlpppEpClass' is equal to 'macAddress', the address for the MLPPP Endpoint Discriminator Option is taken from tmnxL2tpTuMlpppEpMacAddress. The value 'default' specifies that the actual value must be used of the object tmnxL2tpTgMlpppEpClass of the tunnel group this tunnel configuration belongs to. A value other than 'default' is only relevant for tunnels where this system performs the LNS role." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." DEFVAL { default } ::= { tmnxL2tpTuMlpppEntry 8 } tmnxL2tpTuMlpppEpIpv4Address OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppEpIpv4Address specifies the class 2 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTuMlpppEpClass is equal to 'ipv4Address', a value of all zeroes specifies that the system IP address be used; otherwise, it means that no address is specified." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." DEFVAL { '00000000'H } ::= { tmnxL2tpTuMlpppEntry 9 } tmnxL2tpTuMlpppEpMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuMlpppEpMacAddress specifies the class 3 address to use in the MLPPP Endpoint Discriminator Option. While the value of tmnxL2tpTuMlpppEpClass is equal to 'macAddress', a value of all zeroes specifies that the system MAC address be used; otherwise, it means that no address is specified." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." DEFVAL { '000000000000'H } ::= { tmnxL2tpTuMlpppEntry 10 } tmnxL2tpTuXtTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuXtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The L2TP Tunnel configuration table contains more objects to configure L2TP Tunnels. Entries in this table are automatically created and deleted by the system." ::= { tmnxL2tpTuCfgObjs 5 } tmnxL2tpTuXtEntry OBJECT-TYPE SYNTAX TmnxL2tpTuXtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents MLPPP information about a Layer Two Tunneling Protocol Tunnel configuration." AUGMENTS { tmnxL2tpTuCfgEntry } ::= { tmnxL2tpTuXtTable 1 } TmnxL2tpTuXtEntry ::= SEQUENCE { tmnxL2tpTuXtLastMgmtChange TimeStamp, tmnxL2tpTuXtDfBitLac TmnxAlwaysNeverOrDefault, tmnxL2tpTuXtFoRecoveryMethod TmnxL2tpFailoverRecoveryMethod, tmnxL2tpTuXtFoRecoveryTime TmnxL2tpFailoverRecoveryTime } tmnxL2tpTuXtLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuXtLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpTuXtEntry 1 } tmnxL2tpTuXtDfBitLac OBJECT-TYPE SYNTAX TmnxAlwaysNeverOrDefault MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuXtDfBitLac specifies if this system sets the DF (Don't Fragment) bit in the IP header of the data traffic sent from the LAC to the LNS using this tunnel. If the value of this object is 'always', the DF bit is set in upstream traffic. If the value of this object is 'never', the DF bit is cleared in upstream traffic. The value 'default' specifies that the actual value must be used of the object tmnxL2tpTgXtDfBitLac. The value of this object is only relevant for tunnels where this system performs the LAC role." DEFVAL { default } ::= { tmnxL2tpTuXtEntry 2 } tmnxL2tpTuXtFoRecoveryMethod OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryMethod MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuXtFoRecoveryMethod specifies the method to be used for the recovery of stateful information about L2TP this tunnel and its sessions between this system (performing the LAC role) and its failover peer. The value 'default' specifies that the value must be set to the actual value of the object tmnxL2tpTgXtFoRecoveryMethod." DEFVAL { default } ::= { tmnxL2tpTuXtEntry 3 } tmnxL2tpTuXtFoRecoveryTime OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryTime MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpTuXtFoRecoveryTime specifies the period of time period of time that an endpoint asks its peer to wait before assuming the recovery process has failed. A value of '-2' specifies that the value must be set to the actual value of the object tmnxL2tpTgXtFoRecoveryTime." DEFVAL { -2 } ::= { tmnxL2tpTuXtEntry 4 } tmnxL2tpTuL2tpV3Table OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuL2tpV3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuL2tpV3Table contains objects used to configure instances of the L2TPv3 tunnel entries. Entries in this table are automatically created and destroyed via SNMP SET operations to tmnxL2tpTuCfgRowStatus." ::= { tmnxL2tpTuCfgObjs 6 } tmnxL2tpTuL2tpV3Entry OBJECT-TYPE SYNTAX TmnxL2tpTuL2tpV3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each tmnxL2tpTuL2tpV3Entry contains the configuration of one L2TPv3 tunnel entry. Conceptual rows that correspond to V2 Tunnels are immutable." AUGMENTS { tmnxL2tpTuCfgEntry } ::= { tmnxL2tpTuL2tpV3Table 1 } TmnxL2tpTuL2tpV3Entry ::= SEQUENCE { tmnxL2tpTuL2tpV3LastChange TimeStamp, tmnxL2tpTuL2tpV3PubTcpMssAdjust Integer32, tmnxL2tpTuL2tpV3PrivTcpMssAdjust Integer32 } tmnxL2tpTuL2tpV3LastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuL2tpV3LastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxL2tpTuL2tpV3Entry 1 } tmnxL2tpTuL2tpV3PubTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-2 | -1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuL2tpV3PubTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the public network to the private network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet packet. A value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. A value of '-2' specifies that the TCP MSS must be derived from the MSS (i.e., tmnxL2tpV3TgPubTcpMssAdjust) of the associated L2TPv3 tunnel group. When the system receives a TCP SYN packet from the public network and the packet contains an MSS option, the system replaces the MSS option value with tmnxL2tpTuL2tpV3PubTcpMssAdjust when the value of tmnxL2tpTuL2tpV3PubTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the public network and the packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxL2tpTuL2tpV3PubTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -2 } ::= { tmnxL2tpTuL2tpV3Entry 2 } tmnxL2tpTuL2tpV3PrivTcpMssAdjust OBJECT-TYPE SYNTAX Integer32 (-2 | -1 | 512..9000) UNITS "octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpTuL2tpV3PrivTcpMssAdjust specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TP tunnel of this group which is sent from the private network to the public network. The system may use this value to adjust or insert the MSS option in the TCP SYN packet packet. A value of '-1' specifies that the TCP MSS adjustment functionality on the private side is disabled. A value of '-2' specifies that the TCP MSS must be derived from the MSS (i.e., tmnxL2tpV3TgPrivTcpMssAdjust) of the associated L2TPv3 tunnel group. When the system receives a TCP SYN packet from the private network and the packet contains an MSS option, the system replaces the MSS option value with tmnxL2tpTuL2tpV3PrivTcpMssAdjust when the value of tmnxL2tpTuL2tpV3PrivTcpMssAdjust is smaller than the MSS option value. When the system receives a TCP SYN packet from the private network and the packet does not contain an MSS option, the system inserts one whose MSS is equal to tmnxL2tpTuL2tpV3PrivTcpMssAdjust." REFERENCE "RFC 6691, 'TCP Options and Maximum Segment Size (MSS)', IETF, July 2012" DEFVAL { -2 } ::= { tmnxL2tpTuL2tpV3Entry 3 } tmnxL2tpTuStatObjs OBJECT IDENTIFIER ::= { tmnxL2tpTunnelObjs 2 } tmnxL2tpTuStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuStatusTable has an entry for each Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatObjs 2 } tmnxL2tpTuStatusEntry OBJECT-TYPE SYNTAX TmnxL2tpTuStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Tunnel. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpTuStatusId } ::= { tmnxL2tpTuStatusTable 1 } TmnxL2tpTuStatusEntry ::= SEQUENCE { tmnxL2tpTuStatusId TmnxL2tpConnectionId, tmnxL2tpTuStatusState TmnxL2tpTuOperState, tmnxL2tpTuStatusTunnelId TmnxL2tpTunnelId, tmnxL2tpTuStatusPreference TmnxL2tpTunnelPreference, tmnxL2tpTuStatusPeerAddrType InetAddressType, tmnxL2tpTuStatusPeerAddr InetAddress, tmnxL2tpTuStatusAddrType InetAddressType, tmnxL2tpTuStatusAddr InetAddress, tmnxL2tpTuStatusLocalName TmnxL2tpHostNameOrEmpty, tmnxL2tpTuStatusRemoteName TmnxL2tpHostNameOrEmpty, tmnxL2tpTuStatusAssignmentId TmnxL2tpTunnelNameOrEmpty, tmnxL2tpTuStatusHelloInterval TmnxL2tpTunnelHelloInterval, tmnxL2tpTuStatusIdleTO TmnxL2tpTunnelIdleTO, tmnxL2tpTuStatusDestructTO TmnxL2tpTunnelDestructTO, tmnxL2tpTuStatusMaxRetxEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTuStatusMaxRetxNotEstab TmnxL2tpTunnelMaxRetx, tmnxL2tpTuStatusSessionLimit TmnxL2tpSessionLimit, tmnxL2tpTuStatusAvpHiding TmnxL2tpAvpHidingMode, tmnxL2tpTuStatusGroupName TmnxL2tpTunnelGroupNameOrEmpty, tmnxL2tpTuStatusRemoteTunnelId TmnxL2tpTunnelId, tmnxL2tpTuStatusRemoteConnId TmnxL2tpConnectionId, tmnxL2tpTuStatusTransportType TmnxL2tpTransportType, tmnxL2tpTuStatusUdpPort InetPortNumber, tmnxL2tpTuStatusRemoteUdpPort InetPortNumber, tmnxL2tpTuStatusStartTime TimeStamp, tmnxL2tpTuStatusEstabTime TimeStamp, tmnxL2tpTuStatusIdleTime TimeStamp, tmnxL2tpTuStatusClosedTime TimeStamp, tmnxL2tpTuStatusStopCcnResult TmnxL2tpStopCcnResult, tmnxL2tpTuStatusGeneralError TmnxL2tpGeneralError, tmnxL2tpTuStatusErrorMessage TmnxL2tpErrorMessage, tmnxL2tpTuStatusDoChallenge TmnxL2tpDoChallenge, tmnxL2tpTuStatusRws Unsigned32, tmnxL2tpTuStatusTxDestAddrType InetAddressType, tmnxL2tpTuStatusTxDestAddr InetAddress, tmnxL2tpTuStatusRxSrcAddrType InetAddressType, tmnxL2tpTuStatusRxSrcAddr InetAddress, tmnxL2tpTuStatusAccountingPolicy TNamedItemOrEmpty, tmnxL2tpTuStatusSelBlacklstState INTEGER, tmnxL2tpTuStatusSelBlacklstTime TimeStamp, tmnxL2tpTuStatSelBlacklstTimeRem Unsigned32, tmnxL2tpTuStatusTxDestUdpPort InetPortNumber, tmnxL2tpTuStatusRxSrcUdpPort InetPortNumber, tmnxL2tpTuStatusDfBitLac TruthValue, tmnxL2tpTuStatusProtocolVersion TmnxL2tpProtocolVersion, tmnxL2tpTuStatusOperSessionLimit TmnxL2tpSessionLimit } tmnxL2tpTuStatusId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusId indicates the local identifier of this Layer Two Tunneling Protocol Tunnel. In L2TP version 2, it contains the 16-bit tunnel ID in the high-order bits. In L2TP version 3, it is equal to the most significant 16-bit of the control connection ID." ::= { tmnxL2tpTuStatusEntry 1 } tmnxL2tpTuStatusState OBJECT-TYPE SYNTAX TmnxL2tpTuOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusState indicates the operational state of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 2 } tmnxL2tpTuStatusTunnelId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusTunnelId indicates the local identifier of this Layer Two Tunneling Protocol Tunnel, when L2TP version 2 is used. In L2TP version 3, it is equal to the most significant 16-bit of the control connection ID." ::= { tmnxL2tpTuStatusEntry 3 } tmnxL2tpTuStatusPreference OBJECT-TYPE SYNTAX TmnxL2tpTunnelPreference MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusPreference indicates the preference of this Layer Two Tunneling Protocol Tunnel. The value '0' corresponds to the highest preference." ::= { tmnxL2tpTuStatusEntry 4 } tmnxL2tpTuStatusPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusPeerAddrType indicates the address type of tmnxL2tpTuStatusPeerAddr." ::= { tmnxL2tpTuStatusEntry 5 } tmnxL2tpTuStatusPeerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusPeerAddr indicates the IP address of the peer." ::= { tmnxL2tpTuStatusEntry 6 } tmnxL2tpTuStatusAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusAddrType indicates the address type of tmnxL2tpTuStatusAddr." ::= { tmnxL2tpTuStatusEntry 7 } tmnxL2tpTuStatusAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusAddr indicates the local IP address of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 8 } tmnxL2tpTuStatusLocalName OBJECT-TYPE SYNTAX TmnxL2tpHostNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusLocalName indicates the host name used by this system during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Client-Auth-ID. It can be used to distinguish tunnels." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.9." ::= { tmnxL2tpTuStatusEntry 9 } tmnxL2tpTuStatusRemoteName OBJECT-TYPE SYNTAX TmnxL2tpHostNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusRemoteName indicates a string that is compared to the host name used by the tunnel peer during the authentication phase of tunnel establishment. This object is related to the RADIUS attribute Tunnel-Server-Auth-ID. It can be used to distinguish tunnels." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.10." ::= { tmnxL2tpTuStatusEntry 10 } tmnxL2tpTuStatusAssignmentId OBJECT-TYPE SYNTAX TmnxL2tpTunnelNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusAssignmentId indicates a string that distinguishes this Layer Two Tunneling Protocol Tunnel. This object is related to the RADIUS attribute Tunnel-Assignment-ID. If this tunnel corresponds to an entry in the tmnxL2tpTuCfgTable, the value of this object is equal to the value of the object tmnxL2tpTuCfgName." REFERENCE "RFC 2868 RADIUS Attributes for Tunnel Protocol Support section 3.7." ::= { tmnxL2tpTuStatusEntry 11 } tmnxL2tpTuStatusHelloInterval OBJECT-TYPE SYNTAX TmnxL2tpTunnelHelloInterval UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusHelloInterval indicates the time interval between two consecutive tunnel Hello messages. A value of '-1' indicates that the keepalive function is disabled." ::= { tmnxL2tpTuStatusEntry 13 } tmnxL2tpTuStatusIdleTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelIdleTO UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusIdleTO indicates the period of time that this Layer Two Tunneling Protocol Tunnel will persist while it has no active sessions before being disconnected. A value of -1 indicates that the tunnel will not be disconnected when it has no more active sessions." ::= { tmnxL2tpTuStatusEntry 14 } tmnxL2tpTuStatusDestructTO OBJECT-TYPE SYNTAX TmnxL2tpTunnelDestructTO UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusDestructTO indicates the period of time that data of this Layer Two Tunneling Protocol Tunnel will persist after it is disconnected." ::= { tmnxL2tpTuStatusEntry 15 } tmnxL2tpTuStatusMaxRetxEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusMaxRetxEstab indicates the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is established, before its control connection goes down." ::= { tmnxL2tpTuStatusEntry 16 } tmnxL2tpTuStatusMaxRetxNotEstab OBJECT-TYPE SYNTAX TmnxL2tpTunnelMaxRetx MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusMaxRetxNotEstab indicates the number of retries allowed for this Layer Two Tunneling Protocol Tunnel while it is unestablished, before its control connection goes down." ::= { tmnxL2tpTuStatusEntry 17 } tmnxL2tpTuStatusSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusSessionLimit indicates the configured number of sessions allowed in this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 18 } tmnxL2tpTuStatusAvpHiding OBJECT-TYPE SYNTAX TmnxL2tpAvpHidingMode MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusAvpHiding indicates when the H bit in the header of each Attribute Value Pair (AVP) is set for the L2TP control messages related to this Layer Two Tunneling Protocol Tunnel." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.3 Hiding of AVP Attribute Values." ::= { tmnxL2tpTuStatusEntry 19 } tmnxL2tpTuStatusGroupName OBJECT-TYPE SYNTAX TmnxL2tpTunnelGroupNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusGroupName indicates the name of the tunnel group where this Layer Two Tunneling Protocol Tunnel belongs to." ::= { tmnxL2tpTuStatusEntry 20 } tmnxL2tpTuStatusRemoteTunnelId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusRemoteTunnelId indicates the identifier of this Layer Two Tunneling Protocol Tunnel used by the tunnel peer, when L2TP version 2 is used. In L2TP version 3, it is equal to zero." ::= { tmnxL2tpTuStatusEntry 21 } tmnxL2tpTuStatusRemoteConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusRemoteConnId indicates the identifier of this Layer Two Tunneling Protocol Tunnel used by the tunnel peer." ::= { tmnxL2tpTuStatusEntry 22 } tmnxL2tpTuStatusTransportType OBJECT-TYPE SYNTAX TmnxL2tpTransportType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusTransportType indicates the transport type used for the messages of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 23 } tmnxL2tpTuStatusUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusUdpPort indicates the local UDP port of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 24 } tmnxL2tpTuStatusRemoteUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusRemoteUdpPort indicates the UDP port of this Layer Two Tunneling Protocol Tunnel used by the tunnel peer." ::= { tmnxL2tpTuStatusEntry 25 } tmnxL2tpTuStatusStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusStartTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered either the state 'waitReply' or 'waitConn'." ::= { tmnxL2tpTuStatusEntry 26 } tmnxL2tpTuStatusEstabTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusEstabTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered the state 'established'. The value zero means that this tunnel has not been established yet." ::= { tmnxL2tpTuStatusEntry 27 } tmnxL2tpTuStatusIdleTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusIdleTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered the state 'idle'. The value zero means that this tunnel has not become idle yet." ::= { tmnxL2tpTuStatusEntry 28 } tmnxL2tpTuStatusClosedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusClosedTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Tunnel entered one of the closed states. The value zero means that this tunnel has not been closed yet." ::= { tmnxL2tpTuStatusEntry 29 } tmnxL2tpTuStatusStopCcnResult OBJECT-TYPE SYNTAX TmnxL2tpStopCcnResult MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusStopCcnResult indicates the result of a StopCCN (Stop-Control-Connection-Notification) message related to this Layer Two Tunneling Protocol Tunnel." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." ::= { tmnxL2tpTuStatusEntry 30 } tmnxL2tpTuStatusGeneralError OBJECT-TYPE SYNTAX TmnxL2tpGeneralError MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusGeneralError indicates an general error related to this Layer Two Tunneling Protocol Tunnel." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." ::= { tmnxL2tpTuStatusEntry 31 } tmnxL2tpTuStatusErrorMessage OBJECT-TYPE SYNTAX TmnxL2tpErrorMessage MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusErrorMessage indicates describes an error related to this Layer Two Tunneling Protocol Tunnel." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." ::= { tmnxL2tpTuStatusEntry 32 } tmnxL2tpTuStatusDoChallenge OBJECT-TYPE SYNTAX TmnxL2tpDoChallenge MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusDoChallenge indicates when challenge-response is used for the authentication of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 33 } tmnxL2tpTuStatusRws OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusRws indicates the actual Receive Window Size of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 34 } tmnxL2tpTuStatusTxDestAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusTxDestAddrType indicates the address type of tmnxL2tpTuStatusTxDestAddr." ::= { tmnxL2tpTuStatusEntry 35 } tmnxL2tpTuStatusTxDestAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusTxDestAddr indicates the destination IP address used while transmitting L2TP control messages for this Layer Two Tunneling Protocol Tunnel. The destination address can be different from the value of the object tmnxL2tpTuStatusPeerAddr in case the value of the object tmnxL2tpPeerAddrChangePlcy is equal to 'accept'." ::= { tmnxL2tpTuStatusEntry 36 } tmnxL2tpTuStatusRxSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusRxSrcAddrType indicates the address type of tmnxL2tpTuStatusRxSrcAddr." ::= { tmnxL2tpTuStatusEntry 37 } tmnxL2tpTuStatusRxSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusRxSrcAddr indicates the source IP address found in L2TP control messages received for this Layer Two Tunneling Protocol Tunnel. The source address can be different from the value of the object tmnxL2tpTuStatusAddr in case the value of the object tmnxL2tpPeerAddrChangePlcy is equal to 'accept' or 'ignore'." ::= { tmnxL2tpTuStatusEntry 38 } tmnxL2tpTuStatusAccountingPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusAccountingPolicy indicates the RADIUS accounting policy of this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 40 } tmnxL2tpTuStatusSelBlacklstState OBJECT-TYPE SYNTAX INTEGER { notBlacklisted (0), blacklisted (1), selectable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusSelBlacklstState indicates if this tunnel is deemed reachable or not. A value of 'notBlacklisted(0)' indicates the tunnel is not in the tunnel-selection-blacklist and is thus deemed reachable. A value of 'blacklisted(1)' indicates the tunnel is currently in the tunnel-selection-blacklist and is thus deemed unreachable. The tunnel will remain there until the timeout specified in tmnxL2tpXtTuSelBlacklistMaxTime has expired. A value of 'selectable(2)' indicates the tunnel has been in the tunnel-selection-blacklist for the time specified in tmnxL2tpXtTuSelBlacklistMaxTime and can now be selected for a single session, after which the reachability of the tunnel will be reevaluated." ::= { tmnxL2tpTuStatusEntry 41 } tmnxL2tpTuStatusSelBlacklstTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusSelBlacklstTime indicates when the tunnel was put in the tunnel-selection-blacklist. If the tunnel is currently not in the tunnel-selection-blacklist, tmnxL2tpTuStatusSelBlacklstTime will be set to zero." ::= { tmnxL2tpTuStatusEntry 42 } tmnxL2tpTuStatSelBlacklstTimeRem OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatSelBlacklstTimeRem indicates the remaining time the tunnel will remain in the tunnel-selection-blacklist. If the tunnel is currently not in the tunnel-selection-blacklist, tmnxL2tpTuStatSelBlacklstTimeRem will be set to zero." ::= { tmnxL2tpTuStatusEntry 43 } tmnxL2tpTuStatusTxDestUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusTxDestUdpPort indicates the destination UDP port used while transmitting L2TP control messages for this Layer Two Tunneling Protocol Tunnel. The destination UDP port can be different from the value of the object tmnxL2tpTuStatusRemoteUdpPort in case the peer used a different source UDP port in its Start-Control-Connection-Reply than the destination UDP port in the Start-Control-Connection-Request." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 8.1 L2TP over UDP/IP." ::= { tmnxL2tpTuStatusEntry 44 } tmnxL2tpTuStatusRxSrcUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusRxSrcUdpPort indicates the source UDP port found in L2TP control messages received for this Layer Two Tunneling Protocol Tunnel. The source UDP port can be different from the value of the object tmnxL2tpTuStatusRemoteUdpPort in case the peer used a different source UDP port - in its Start-Control-Connection-Reply, or - in any control message, while the value of the object tmnxL2tpPeerAddrChangePlcy is equal to 'ignore'." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 8.1 L2TP over UDP/IP." ::= { tmnxL2tpTuStatusEntry 45 } tmnxL2tpTuStatusDfBitLac OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusDfBitLac indicates if this system, while performing the LAC role, sets the DF (Don't Fragment) bit in the IP header of the data traffic transmitted with this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 46 } tmnxL2tpTuStatusProtocolVersion OBJECT-TYPE SYNTAX TmnxL2tpProtocolVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusProtocolVersion indicates the L2TP protocol version for this Layer Two Tunneling Protocol tunnel." DEFVAL { undefined } ::= { tmnxL2tpTuStatusEntry 47 } tmnxL2tpTuStatusOperSessionLimit OBJECT-TYPE SYNTAX TmnxL2tpSessionLimit MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatusOperSessionLimit indicates the operational number of sessions allowed in this Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatusEntry 48 } tmnxL2tpTuStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuStatsTable has an entry for each Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatObjs 3 } tmnxL2tpTuStatsEntry OBJECT-TYPE SYNTAX TmnxL2tpTuStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents statistics information of a Layer Two Tunneling Protocol Tunnel. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpTuStatusEntry } ::= { tmnxL2tpTuStatsTable 1 } TmnxL2tpTuStatsEntry ::= SEQUENCE { tmnxL2tpTuStatsLastCleared TimeStamp, tmnxL2tpTuStatsTotalSessions Counter32, tmnxL2tpTuStatsFailedSessions Counter32, tmnxL2tpTuStatsActiveSessions Gauge32, tmnxL2tpTuStatsSessions Gauge32, tmnxL2tpTuStatsControlRxOctets Counter64, tmnxL2tpTuStatsControlRxOctetsLw Counter32, tmnxL2tpTuStatsControlRxOctetsHw Counter32, tmnxL2tpTuStatsControlRxPkts Counter32, tmnxL2tpTuStatsControlTxOctets Counter64, tmnxL2tpTuStatsControlTxOctetsLw Counter32, tmnxL2tpTuStatsControlTxOctetsHw Counter32, tmnxL2tpTuStatsControlTxPkts Counter32, tmnxL2tpTuStatsErrorTxPkts Counter32, tmnxL2tpTuStatsErrorRxPkts Counter32, tmnxL2tpTuStatsFsmMsgAccepted Counter32, tmnxL2tpTuStatsFsmMsgDuplicateRx Counter32, tmnxL2tpTuStatsFsmMsgOutOfWndwRx Counter32, tmnxL2tpTuStatsQLengthUnsentMax Gauge32, tmnxL2tpTuStatsQLengthUnsentCur Gauge32, tmnxL2tpTuStatsQLengthAckMax Gauge32, tmnxL2tpTuStatsQLengthAckCur Gauge32, tmnxL2tpTuStatsWindowSizeCur Gauge32 } tmnxL2tpTuStatsLastCleared OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatsLastCleared indicates the value of sysUpTime when the contents of this conceptual row were cleared for the last time. The value zero means that the contents of this conceptual row have not yet been cleared." ::= { tmnxL2tpTuStatsEntry 1 } tmnxL2tpTuStatsTotalSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsTotalSessions indicates the number of session creation attempts in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 2 } tmnxL2tpTuStatsFailedSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsFailedSessions indicates the number of sessions in this tunnel that failed to reach the established state since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 3 } tmnxL2tpTuStatsActiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsActiveSessions indicates the number of sessions currently established in this tunnel." ::= { tmnxL2tpTuStatsEntry 4 } tmnxL2tpTuStatsSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsSessions indicates the actual number of sessions in this tunnel." ::= { tmnxL2tpTuStatsEntry 5 } tmnxL2tpTuStatsControlRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlRxOctets indicates the number of control channel octets received in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 6 } tmnxL2tpTuStatsControlRxOctetsLw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlRxOctetsLw indicates the lower 32-bits word of the value of tmnxL2tpTuStatsControlRxOctets." ::= { tmnxL2tpTuStatsEntry 7 } tmnxL2tpTuStatsControlRxOctetsHw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlRxOctetsHw indicates the higher 32-bits word of the value of tmnxL2tpTuStatsControlRxOctets." ::= { tmnxL2tpTuStatsEntry 8 } tmnxL2tpTuStatsControlRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlRxPkts indicates the number of control packets received by this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 9 } tmnxL2tpTuStatsControlTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlTxOctets indicates the number of control channel octets that were transmitted to the current tunnel endpoints in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 10 } tmnxL2tpTuStatsControlTxOctetsLw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlTxOctetsLw indicates the lower 32-bits word of the value of tmnxL2tpTuStatsControlTxOctets." ::= { tmnxL2tpTuStatsEntry 11 } tmnxL2tpTuStatsControlTxOctetsHw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlTxOctetsHw indicates the higher 32-bits word of the value of tmnxL2tpTuStatsControlTxOctets." ::= { tmnxL2tpTuStatsEntry 12 } tmnxL2tpTuStatsControlTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsControlTxPkts indicates the number of control packets that were transmitted to the current tunnel endpoints in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 13 } tmnxL2tpTuStatsErrorTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsErrorTxPkts indicates the number of packet transmission errors on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 14 } tmnxL2tpTuStatsErrorRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsErrorRxPkts indicates the number of errored packets that were received on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 15 } tmnxL2tpTuStatsFsmMsgAccepted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsFsmMsgAccepted indicates the number of Finite State Machine (FSM) messages that were accepted on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 16 } tmnxL2tpTuStatsFsmMsgDuplicateRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsFsmMsgDuplicateRx indicates the number of Finite State Machine (FSM) duplicate messages that were received on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 17 } tmnxL2tpTuStatsFsmMsgOutOfWndwRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsFsmMsgOutOfWndwRx indicates the number of Finite State Machine (FSM) messages that were received out of the receive window on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 18 } tmnxL2tpTuStatsQLengthUnsentMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsQLengthUnsentMax indicates the the maximum length of the unsent message queue on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 19 } tmnxL2tpTuStatsQLengthUnsentCur OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsQLengthUnsentCur indicates the the current length of the unsent message queue on this tunnel." ::= { tmnxL2tpTuStatsEntry 20 } tmnxL2tpTuStatsQLengthAckMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsQLengthAckMax indicates the the maximum length of the acknowledged message queue on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpTuStatsEntry 21 } tmnxL2tpTuStatsQLengthAckCur OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsQLengthAckCur indicates the the current length of the acknowledged message queue on this tunnel." ::= { tmnxL2tpTuStatsEntry 22 } tmnxL2tpTuStatsWindowSizeCur OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuStatsWindowSizeCur indicates the the current size of the receive window on this tunnel." ::= { tmnxL2tpTuStatsEntry 23 } tmnxL2tpTuProtStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuProtStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuProtStatsTable shows protocol statistics information of Layer Two Tunneling Protocol Tunnels." ::= { tmnxL2tpTuStatObjs 4 } tmnxL2tpTuProtStatsEntry OBJECT-TYPE SYNTAX TmnxL2tpTuProtStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents protocol statistics of a specific type. Entries in this table are created and destroyed by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table." INDEX { vRtrID, tmnxL2tpTuStatusId, tmnxL2tpTuProtStatsType, tmnxL2tpTuProtStatsInstance } ::= { tmnxL2tpTuProtStatsTable 1 } TmnxL2tpTuProtStatsEntry ::= SEQUENCE { tmnxL2tpTuProtStatsType TmnxL2tpTuProtStatsType, tmnxL2tpTuProtStatsInstance Unsigned32, tmnxL2tpTuProtStatsName DisplayString, tmnxL2tpTuProtStatsVal Counter32 } tmnxL2tpTuProtStatsType OBJECT-TYPE SYNTAX TmnxL2tpTuProtStatsType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpTuProtStatsType indicates the type of L2TP protocol statistics contained in this conceptual row." ::= { tmnxL2tpTuProtStatsEntry 1 } tmnxL2tpTuProtStatsInstance OBJECT-TYPE SYNTAX Unsigned32 (0..69 | 4294967294 | 4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpTuProtStatsInstance indicates the instance identifier of the statistics contained in this conceptual row. For example: if the value of the object tmnxL2tpTuProtStatsType is equal to 'outgoingMsgType', the value of tmnxL2tpTuProtStatsInstance is a message identifier, e.g. instance '2' refers to '(SCCRP) Start-Control-Connection-Reply', and the value of tmnxL2tpTuProtStatsVal indicates the number of SCCRP messages transmitted for this tunnel. The value of this object is 4294967294 for Zero-Length Body (ZLB) messages. The value of this object is 4294967295 for incoming protocol messages with unknown values for message ID, return code or result code." ::= { tmnxL2tpTuProtStatsEntry 2 } tmnxL2tpTuProtStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuProtStatsName indicates the human-readable identifier of the statistics contained in this conceptual row. In the same example, the value of tmnxL2tpTuProtStatsName is '(SCCRP) Start-Control-Connection-Reply'." ::= { tmnxL2tpTuProtStatsEntry 3 } tmnxL2tpTuProtStatsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuProtStatsVal indicates the value of the statistics contained in this conceptual row." ::= { tmnxL2tpTuProtStatsEntry 4 } tmnxL2tpTuFoTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuFoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuFoTable has an entry for each Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatObjs 5 } tmnxL2tpTuFoEntry OBJECT-TYPE SYNTAX TmnxL2tpTuFoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents Multi-Chassis failover information of a Layer Two Tunneling Protocol Tunnel. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpTuStatusEntry } ::= { tmnxL2tpTuFoTable 1 } TmnxL2tpTuFoEntry ::= SEQUENCE { tmnxL2tpTuFoState INTEGER, tmnxL2tpTuFoConnId TmnxL2tpConnectionId, tmnxL2tpTuFoRecoveryState INTEGER, tmnxL2tpTuFoRecoveredConnId TmnxL2tpConnectionId, tmnxL2tpTuFoRecoveryMethod TmnxL2tpFailoverRecoveryMethod, tmnxL2tpTuFoTrkSrrp Unsigned32, tmnxL2tpTuFoControlMsgBehavior INTEGER, tmnxL2tpTuFoRecoveryTimeReq Unsigned32, tmnxL2tpTuFoRecoveryTimePeer Unsigned32 } tmnxL2tpTuFoState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), notRecoverable (1), recoverable (2), recovering (3), recoveryFailed (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuFoState indicates the Multi-Chassis failover state of a L2TP tunnel." REFERENCE "RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) 'failover', section 3.2. Failover Recovery Procedure." ::= { tmnxL2tpTuFoEntry 1 } tmnxL2tpTuFoConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuFoConnId indicates the identifier of the recovery tunnel associated with this L2TP tunnel. The value zero indicates that there is none." REFERENCE "RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) 'failover', section 1.1. Terminology." ::= { tmnxL2tpTuFoEntry 2 } tmnxL2tpTuFoRecoveryState OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), recoveryTunnel (1), recoveryRejected (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuFoRecoveryState indicates the failover state of a recovery tunnel. The value 'notApplicable' indicates that this is not a recovery tunnel." REFERENCE "RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) 'failover', section 3.2. Failover Recovery Procedure." ::= { tmnxL2tpTuFoEntry 3 } tmnxL2tpTuFoRecoveredConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuFoRecoveredConnId indicates the identifier of the recovered/old tunnel. The value zero indicates that there is none." REFERENCE "RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) 'failover', section 1.1. Terminology." ::= { tmnxL2tpTuFoEntry 4 } tmnxL2tpTuFoRecoveryMethod OBJECT-TYPE SYNTAX TmnxL2tpFailoverRecoveryMethod MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuFoRecoveryMethod indicates the the method used for the recovery of stateful information of this tunnel and its sessions between this system (performing the LAC role) and its failover peer. The value 'default' indicates that it is not applicable." ::= { tmnxL2tpTuFoEntry 5 } tmnxL2tpTuFoTrkSrrp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuFoTrkSrrp indicates the Simple Router Redundancy Protocol (SRRP) instance used for Multi-Chassis redundancy failover that is associated with this Layer Two Tunneling Protocol Tunnel. The value zero indicates that there is none." ::= { tmnxL2tpTuFoEntry 6 } tmnxL2tpTuFoControlMsgBehavior OBJECT-TYPE SYNTAX INTEGER { handle (1), forwardToMcsPeer (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuFoControlMsgBehavior indicates the behavior of this system with respect to the L2TP control traffic associated with this tunnel. It is possible that this system handles L2TP control traffic while forwarding L2TP data traffic, or the other way around." ::= { tmnxL2tpTuFoEntry 7 } tmnxL2tpTuFoRecoveryTimeReq OBJECT-TYPE SYNTAX Unsigned32 (0..36000000 | 4294967295) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuFoRecoveryTimeReq indicates the value of the Recovery Time AVP requested to the peer system during the Failover Capability Negotiation. The value all ones indicates that the value is not applicable." REFERENCE "RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) 'failover', section 5.1. Failover Capability AVP." ::= { tmnxL2tpTuFoEntry 8 } tmnxL2tpTuFoRecoveryTimePeer OBJECT-TYPE SYNTAX Unsigned32 (0..36000000 | 4294967295) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTuFoRecoveryTimePeer indicates the value of the Recovery Time AVP learned during the Failover Capability Negotiation. However, the learned value is capped at one hour. The value all ones indicates that the value is not applicable." REFERENCE "RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) 'failover', section 5.1. Failover Capability AVP." ::= { tmnxL2tpTuFoEntry 9 } tmnxL2tpV3TuStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpV3TuStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpV3TuStatusTable has an entry for each Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuStatObjs 6 } tmnxL2tpV3TuStatusEntry OBJECT-TYPE SYNTAX TmnxL2tpV3TuStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol V3 Tunnel. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpV3TuStatId } ::= { tmnxL2tpV3TuStatusTable 1 } TmnxL2tpV3TuStatusEntry ::= SEQUENCE { tmnxL2tpV3TuStatId TmnxL2tpConnectionId, tmnxL2tpV3TuStatCookieLen TmnxL2tpCookieLength, tmnxL2tpV3TuStatDigestType TmnxL2tpDigestType, tmnxL2tpV3TuStatLocNonce OCTET STRING, tmnxL2tpV3TuStatRemNonce OCTET STRING, tmnxL2tpV3TuStatRemRtrId OCTET STRING, tmnxL2tpV3TuStatPwCapList TmnxL2tpConfPwType, tmnxL2tpV3TuStatPubTcpMss Integer32, tmnxL2tpV3TuStatPrivTcpMss Integer32 } tmnxL2tpV3TuStatId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpV3TuStatId indicates the local identifier of this Layer Two Tunneling Protocol V3 Tunnel." ::= { tmnxL2tpV3TuStatusEntry 1 } tmnxL2tpV3TuStatCookieLen OBJECT-TYPE SYNTAX TmnxL2tpCookieLength (0 | 4 | 8) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatCookieLen indicates the length of the cookie used at the outgoing data messages of the L2TP tunnel." ::= { tmnxL2tpV3TuStatusEntry 2 } tmnxL2tpV3TuStatDigestType OBJECT-TYPE SYNTAX TmnxL2tpDigestType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatDigestType indicates the digest type used in the Message Digest AVP of the outgoing control messages of the L2TP tunnel. The value 'default' is not allowed here." ::= { tmnxL2tpV3TuStatusEntry 3 } tmnxL2tpV3TuStatLocNonce OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatLocNonce indicates the Nonce AVP in the Control Message Authentication added to outgoing control messages at the local side of the tunnel." ::= { tmnxL2tpV3TuStatusEntry 4 } tmnxL2tpV3TuStatRemNonce OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatRemNonce indicates the Nonce AVP in the Control Message Authentication added to outgoing control messages at the remote side of the tunnel." ::= { tmnxL2tpV3TuStatusEntry 5 } tmnxL2tpV3TuStatRemRtrId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (4)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatRemRtrId indicates the router-id that is used in the incoming control messages of the L2TP tunnel. An address 0.0.0.0 means that the router-id in the incoming control messages is not checked." ::= { tmnxL2tpV3TuStatusEntry 6 } tmnxL2tpV3TuStatPwCapList OBJECT-TYPE SYNTAX TmnxL2tpConfPwType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatPwCapList indicates the Pseudo Wire capture list type(s) to be accepted in the incoming control messages of the L2TP tunnel." ::= { tmnxL2tpV3TuStatusEntry 7 } tmnxL2tpV3TuStatPubTcpMss OBJECT-TYPE SYNTAX Integer32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatPubTcpMss indicates the Maximum Segment Size (MSS) for the TCP traffic in a L2TPv3 tunnel which is sent from the public network to the private network." ::= { tmnxL2tpV3TuStatusEntry 8 } tmnxL2tpV3TuStatPrivTcpMss OBJECT-TYPE SYNTAX Integer32 UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3TuStatPrivTcpMss specifies the Maximum Segment Size (MSS) for the TCP traffic in a L2TPv3 tunnel which is sent from the private network to the public network." ::= { tmnxL2tpV3TuStatusEntry 9 } tmnxL2tpVasTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpVasTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpVasTunnelTable has an entry for each Layer Two Tunneling Protocol VAS Tunnel." ::= { tmnxL2tpTuStatObjs 7 } tmnxL2tpVasTunnelEntry OBJECT-TYPE SYNTAX TmnxL2tpVasTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol VAS Tunnel. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpVasConnectionId } ::= { tmnxL2tpVasTunnelTable 1 } TmnxL2tpVasTunnelEntry ::= SEQUENCE { tmnxL2tpVasConnectionId TmnxL2tpConnectionId, tmnxL2tpVasTunnelTransportType TmnxL2tpTransportType, tmnxL2tpVasTunnelLocalAddrType InetAddressType, tmnxL2tpVasTunnelLocalAddr InetAddress, tmnxL2tpVasTunnelLocalUdpPort InetPortNumber, tmnxL2tpVasTunnelRemoteAddrType InetAddressType, tmnxL2tpVasTunnelRemoteAddr InetAddress, tmnxL2tpVasTunnelRemoteUdpPort InetPortNumber, tmnxL2tpVasTunnelBaseVRtrId TmnxVRtrID, tmnxL2tpVasLocalTunnelId TmnxL2tpTunnelId, tmnxL2tpVasRemoteConnId TmnxL2tpConnectionId, tmnxL2tpVasRemoteTunnelId TmnxL2tpTunnelId } tmnxL2tpVasConnectionId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpVasConnectionId indicates the local identifier of this Layer Two Tunneling Protocol VAS Tunnel." ::= { tmnxL2tpVasTunnelEntry 1 } tmnxL2tpVasTunnelTransportType OBJECT-TYPE SYNTAX TmnxL2tpTransportType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTunnelTransportType indicates the transport type used for the messages of the VAS Tunnel." ::= { tmnxL2tpVasTunnelEntry 2 } tmnxL2tpVasTunnelLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVasTunnelLocalAddrType specifies the address type of tmnxL2tpVasTunnelLocalAddr." ::= { tmnxL2tpVasTunnelEntry 3 } tmnxL2tpVasTunnelLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVasTunnelLocalAddr specifies the local IP address of the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 4 } tmnxL2tpVasTunnelLocalUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTunnelLocalUdpPort indicates the local UDP port used by the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 5 } tmnxL2tpVasTunnelRemoteAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVasTunnelRemoteAddrType specifies the address type of tmnxL2tpVasTunnelRemoteAddr." ::= { tmnxL2tpVasTunnelEntry 6 } tmnxL2tpVasTunnelRemoteAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVasTunnelRemoteAddr specifies the remote IP address of the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 7 } tmnxL2tpVasTunnelRemoteUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTunnelRemoteUdpPort indicates the remote UDP port of the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 8 } tmnxL2tpVasTunnelBaseVRtrId OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVasTunnelBaseVRtrId indicates the virtual router instance used as the base of the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 9 } tmnxL2tpVasLocalTunnelId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasLocalTunnelId indicates the local identifier of the Layer Two Tunneling Protocol Tunnel associated to the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 10 } tmnxL2tpVasRemoteConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasRemoteConnId indicates the remote identifier of this Layer Two Tunneling Protocol Tunnel associated to the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 11 } tmnxL2tpVasRemoteTunnelId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasRemoteTunnelId indicates the remote identifier of the Layer Two Tunneling Protocol Tunnel associated to the VAS tunnel." ::= { tmnxL2tpVasTunnelEntry 12 } tmnxL2tpVasTuSessTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpVasTuSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpVasTuSessTable has an entry for each session on a Layer Two Tunneling Protocol VAS Tunnel." ::= { tmnxL2tpTuStatObjs 8 } tmnxL2tpVasTuSessEntry OBJECT-TYPE SYNTAX TmnxL2tpVasTuSessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol VAS Tunnel Session. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpVasTuCtrlConnectionId, tmnxL2tpVasTuSessConnectionId } ::= { tmnxL2tpVasTuSessTable 1 } TmnxL2tpVasTuSessEntry ::= SEQUENCE { tmnxL2tpVasTuCtrlConnectionId TmnxL2tpConnectionId, tmnxL2tpVasTuSessConnectionId TmnxL2tpConnectionId, tmnxL2tpVasTuSessLocalSessionId TmnxL2tpTunnelId, tmnxL2tpVasToSessRemoteConnId TmnxL2tpConnectionId, tmnxL2tpVasTuSessRemoteSessionId TmnxL2tpTunnelId } tmnxL2tpVasTuCtrlConnectionId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTuCtrlConnectionId indicates the local identifier of the Layer Two Tunneling Protocol VAS Tunnel associated to the Session." ::= { tmnxL2tpVasTuSessEntry 1 } tmnxL2tpVasTuSessConnectionId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTuSessConnectionId indicates the local identifier of the Layer Two Tunneling Protocol VAS Tunnel Session." ::= { tmnxL2tpVasTuSessEntry 2 } tmnxL2tpVasTuSessLocalSessionId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTuSessLocalSessionId indicates the local Session ID of the Layer Two Tunneling Protocol VAS Tunnel Session." ::= { tmnxL2tpVasTuSessEntry 3 } tmnxL2tpVasToSessRemoteConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasToSessRemoteConnId indicates the remote identifier of the Layer Two Tunneling Protocol VAS Tunnel Session." ::= { tmnxL2tpVasTuSessEntry 4 } tmnxL2tpVasTuSessRemoteSessionId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVasTuSessRemoteSessionId indicates the remote Session ID of the Layer Two Tunneling Protocol VAS Tunnel Session." ::= { tmnxL2tpVasTuSessEntry 5 } tmnxL2tpTuOpObjs OBJECT IDENTIFIER ::= { tmnxL2tpTunnelObjs 3 } tmnxL2tpTuStartTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuStartEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuStartTable has an entry for each Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuOpObjs 1 } tmnxL2tpTuStartEntry OBJECT-TYPE SYNTAX TmnxL2tpTuStartEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row presents an operations interface to start a Layer Two Tunneling Protocol Tunnel control connection. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpTuCfgEntry } ::= { tmnxL2tpTuStartTable 1 } TmnxL2tpTuStartEntry ::= SEQUENCE { tmnxL2tpTuStart TmnxActionType } tmnxL2tpTuStart OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'doAction (1)' triggers an attempt to start the control connection for this L2TP tunnel. Reading this object returns the value 'notApplicable'." DEFVAL { notApplicable } ::= { tmnxL2tpTuStartEntry 1 } tmnxL2tpTuStopTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuStopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuStopTable has an entry for each active Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuOpObjs 2 } tmnxL2tpTuStopEntry OBJECT-TYPE SYNTAX TmnxL2tpTuStopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row presents an operations interface to stop a Layer Two Tunneling Protocol Tunnel control connection. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpTuStatusEntry } ::= { tmnxL2tpTuStopTable 1 } TmnxL2tpTuStopEntry ::= SEQUENCE { tmnxL2tpTuStop TmnxActionType } tmnxL2tpTuStop OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'doAction (1)' triggers an attempt to stop the control connection for this L2TP tunnel. Reading this object returns the value 'notApplicable'." DEFVAL { notApplicable } ::= { tmnxL2tpTuStopEntry 1 } tmnxL2tpTuDrainTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpTuDrainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpTuDrainTable has an entry for each active Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpTuOpObjs 3 } tmnxL2tpTuDrainEntry OBJECT-TYPE SYNTAX TmnxL2tpTuDrainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row presents an operations interface to drain a Layer Two Tunneling Protocol Tunnel. After a successful drain operation, the value of the object tmnxL2tpTuStatusState of this tunnel is equal to 'draining'; this tunnel does not accept or establish new connections, while existing connections are timing out. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpTuStatusEntry } ::= { tmnxL2tpTuDrainTable 1 } TmnxL2tpTuDrainEntry ::= SEQUENCE { tmnxL2tpTuDrain TmnxL2tpActionTypeDrain } tmnxL2tpTuDrain OBJECT-TYPE SYNTAX TmnxL2tpActionTypeDrain MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'drain (0)' triggers an attempt to drain this L2TP tunnel. Setting it to 'stopDrain (1)' stops the draining. Reading this object returns the value 'notApplicable'." DEFVAL { notApplicable } ::= { tmnxL2tpTuDrainEntry 1 } tmnxL2tpPeerObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 4 } tmnxL2tpPeerStatObjs OBJECT IDENTIFIER ::= { tmnxL2tpPeerObjs 1 } tmnxL2tpPeerStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpPeerStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpPeerStatTable contains status and statistics information about L2TP peers." ::= { tmnxL2tpPeerStatObjs 1 } tmnxL2tpPeerStatEntry OBJECT-TYPE SYNTAX TmnxL2tpPeerStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents status and statistics information about a particular L2TP peer. Rows are created or removed automatically by the system." INDEX { vRtrID, tmnxL2tpTuStatusTransportType, tmnxL2tpTuStatusPeerAddrType, tmnxL2tpTuStatusPeerAddr, tmnxL2tpTuStatusRemoteUdpPort } ::= { tmnxL2tpPeerStatTable 1 } TmnxL2tpPeerStatEntry ::= SEQUENCE { tmnxL2tpPeerStatRole INTEGER, tmnxL2tpPeerStatActiveTunnels Gauge32, tmnxL2tpPeerStatTunnels Gauge32, tmnxL2tpPeerStatActiveSessions Gauge32, tmnxL2tpPeerStatSessions Gauge32, tmnxL2tpPeerStatDraining TruthValue, tmnxL2tpPeerStatUnreachable INTEGER, tmnxL2tpPeerStatUnreachableTime TimeStamp, tmnxL2tpPeerStatControlRxOct Counter64, tmnxL2tpPeerStatControlRxOctLw Counter32, tmnxL2tpPeerStatControlRxOctHw Counter32, tmnxL2tpPeerStatControlRxPkts Counter32, tmnxL2tpPeerStatControlTxOct Counter64, tmnxL2tpPeerStatControlTxOctLw Counter32, tmnxL2tpPeerStatControlTxOctHw Counter32, tmnxL2tpPeerStatControlTxPkts Counter32, tmnxL2tpPeerStatErrorTxPkts Counter32, tmnxL2tpPeerStatErrorRxPkts Counter32, tmnxL2tpPeerStatMsgAccepted Counter32, tmnxL2tpPeerStatMsgDuplicateRx Counter32, tmnxL2tpPeerStatMsgOutOfWndwRx Counter32, tmnxL2tpPeerStatRolesCapability TmnxL2tpRoles, tmnxL2tpPeerStatRoles TmnxL2tpRoles, tmnxL2tpPeerStatUnreachTimeRem Unsigned32, tmnxL2tpPeerStatLastCleared TimeStamp } tmnxL2tpPeerStatRole OBJECT-TYPE SYNTAX INTEGER { roleLAC (1), roleLNS (2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpPeerStatRole indicates the role of this system in relation to the peer." ::= { tmnxL2tpPeerStatEntry 1 } tmnxL2tpPeerStatActiveTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatActiveTunnels indicates the number of tunnels associated with this peer that are currently established." ::= { tmnxL2tpPeerStatEntry 2 } tmnxL2tpPeerStatTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatTunnels indicates the actual number of tunnels associated with this peer." ::= { tmnxL2tpPeerStatEntry 3 } tmnxL2tpPeerStatActiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatActiveSessions indicates the number of sessions associated with this peer that are currently established." ::= { tmnxL2tpPeerStatEntry 4 } tmnxL2tpPeerStatSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatSessions indicates the actual number of sessions associated with this peer." ::= { tmnxL2tpPeerStatEntry 5 } tmnxL2tpPeerStatDraining OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatDraining indicates if this peer is being drained." ::= { tmnxL2tpPeerStatEntry 6 } tmnxL2tpPeerStatUnreachable OBJECT-TYPE SYNTAX INTEGER { unreachable (1), reachable (2), selectable (3), blacklisted (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatUnreachable indicates if this tunnel is deemed reachable or not. A value of 'blacklisted(4)' indicates the peer has been deemed unreachable and has been put in the tunnel-selection-blacklist. A value of 'selectable(2)' indicates the peer has been deemed unreachable for the time specified in tmnxL2tpXtTuSelBlacklistMaxTime and can now be selected for a single session, after which the reachability of the peer will be reevaluated." ::= { tmnxL2tpPeerStatEntry 7 } tmnxL2tpPeerStatUnreachableTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerStatUnreachableTime indicates the value of sysUpTime when the this peer was deemed unreachable for the last time. The value zero means that this peer has not been deemed unreachable yet." ::= { tmnxL2tpPeerStatEntry 8 } tmnxL2tpPeerStatControlRxOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlRxOct indicates the number of control channel octets received in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 9 } tmnxL2tpPeerStatControlRxOctLw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlRxOctLw indicates the lower 32-bits word of the value of tmnxL2tpPeerStatControlRxOct." ::= { tmnxL2tpPeerStatEntry 10 } tmnxL2tpPeerStatControlRxOctHw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlRxOctHw indicates the higher 32-bits word of the value of tmnxL2tpPeerStatControlRxOct." ::= { tmnxL2tpPeerStatEntry 11 } tmnxL2tpPeerStatControlRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlRxPkts indicates the number of control packets received by this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 12 } tmnxL2tpPeerStatControlTxOct OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlTxOct indicates the number of control channel octets that were transmitted to the current tunnel endpoints in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 13 } tmnxL2tpPeerStatControlTxOctLw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlTxOctLw indicates the lower 32-bits word of the value of tmnxL2tpPeerStatControlTxOct." ::= { tmnxL2tpPeerStatEntry 14 } tmnxL2tpPeerStatControlTxOctHw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlTxOctHw indicates the higher 32-bits word of the value of tmnxL2tpPeerStatControlTxOct." ::= { tmnxL2tpPeerStatEntry 15 } tmnxL2tpPeerStatControlTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatControlTxPkts indicates the number of control packets that were transmitted to the current tunnel endpoints in this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 16 } tmnxL2tpPeerStatErrorTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatErrorTxPkts indicates the number of packet transmission errors on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 17 } tmnxL2tpPeerStatErrorRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatErrorRxPkts indicates the number of errored packets that were received on this tunnel since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 18 } tmnxL2tpPeerStatMsgAccepted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatMsgAccepted indicates the number of Finite State Machine (FSM) messages that were accepted from this peer since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 19 } tmnxL2tpPeerStatMsgDuplicateRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatMsgDuplicateRx indicates the number of Finite State Machine (FSM) duplicate messages that were received from this peer since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 20 } tmnxL2tpPeerStatMsgOutOfWndwRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatMsgOutOfWndwRx indicates the number of Finite State Machine (FSM) messages that were received out of the receive window from this peer since the last re-initialization of the local network management subsystem, or the last time the tunnel statistics were cleared." ::= { tmnxL2tpPeerStatEntry 21 } tmnxL2tpPeerStatRolesCapability OBJECT-TYPE SYNTAX TmnxL2tpRoles MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatRolesCapability indicates the roles that this system could perform in relation to the peer." ::= { tmnxL2tpPeerStatEntry 22 } tmnxL2tpPeerStatRoles OBJECT-TYPE SYNTAX TmnxL2tpRoles MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatRoles indicates the actual roles of this system in relation to the peer." ::= { tmnxL2tpPeerStatEntry 23 } tmnxL2tpPeerStatUnreachTimeRem OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpPeerStatUnreachTimeRem indicates the remaining time the peer will remain in the tunnel-selection-blacklist. If the peer is currently not in the tunnel-selection-blacklist, tmnxL2tpPeerStatUnreachTimeRem will be set to zero." ::= { tmnxL2tpPeerStatEntry 24 } tmnxL2tpPeerStatLastCleared OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerStatLastCleared indicates the value of sysUpTime when the contents of this conceptual row were cleared for the last time. The value zero means that the contents of this conceptual row have not yet been cleared." ::= { tmnxL2tpPeerStatEntry 99 } tmnxL2tpPeerTuTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpPeerTuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpPeerTuTable contains the set of active tunnels for each L2TP peer." ::= { tmnxL2tpPeerStatObjs 2 } tmnxL2tpPeerTuEntry OBJECT-TYPE SYNTAX TmnxL2tpPeerTuEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains a tunnel identifier of a L2TP peer. Rows are created or removed automatically by the system." INDEX { vRtrID, tmnxL2tpTuStatusTransportType, tmnxL2tpTuStatusPeerAddrType, tmnxL2tpTuStatusPeerAddr, tmnxL2tpTuStatusRemoteUdpPort, tmnxL2tpPeerTuId } ::= { tmnxL2tpPeerTuTable 1 } TmnxL2tpPeerTuEntry ::= SEQUENCE { tmnxL2tpPeerTuId TmnxL2tpConnectionId } tmnxL2tpPeerTuId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerTuId indicates the local identifier of a Layer Two Tunneling Protocol Tunnel." ::= { tmnxL2tpPeerTuEntry 1 } tmnxL2tpPeerProtStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpPeerProtStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpPeerProtStatsTable contains protocol statistics information about L2TP peers." ::= { tmnxL2tpPeerStatObjs 3 } tmnxL2tpPeerProtStatsEntry OBJECT-TYPE SYNTAX TmnxL2tpPeerProtStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents protocol statistics of a specific type for a specific L2TP peer. Entries in this table are created and destroyed by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table." INDEX { vRtrID, tmnxL2tpPeerProtStatsTransport, tmnxL2tpPeerProtStatsAddrType, tmnxL2tpPeerProtStatsAddr, tmnxL2tpPeerProtStatsRemUdpPort, tmnxL2tpPeerProtStatsType, tmnxL2tpPeerProtStatsInstance } ::= { tmnxL2tpPeerProtStatsTable 1 } TmnxL2tpPeerProtStatsEntry ::= SEQUENCE { tmnxL2tpPeerProtStatsTransport TmnxL2tpTransportType, tmnxL2tpPeerProtStatsAddrType InetAddressType, tmnxL2tpPeerProtStatsAddr InetAddress, tmnxL2tpPeerProtStatsRemUdpPort InetPortNumber, tmnxL2tpPeerProtStatsType TmnxL2tpTuProtStatsType, tmnxL2tpPeerProtStatsInstance Unsigned32, tmnxL2tpPeerProtStatsName DisplayString, tmnxL2tpPeerProtStatsVal Counter32 } tmnxL2tpPeerProtStatsTransport OBJECT-TYPE SYNTAX TmnxL2tpTransportType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerProtStatsTransport indicates the transport type used for the messages to this L2TP peer." ::= { tmnxL2tpPeerProtStatsEntry 1 } tmnxL2tpPeerProtStatsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxL2tpPeerProtStatsAddrType indicates the address type of tmnxL2tpPeerProtStatsAddr." ::= { tmnxL2tpPeerProtStatsEntry 2 } tmnxL2tpPeerProtStatsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxL2tpPeerProtStatsAddr indicates the IP address of the peer." ::= { tmnxL2tpPeerProtStatsEntry 3 } tmnxL2tpPeerProtStatsRemUdpPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerProtStatsRemUdpPort indicates the UDP port used by the tunnel peer." ::= { tmnxL2tpPeerProtStatsEntry 4 } tmnxL2tpPeerProtStatsType OBJECT-TYPE SYNTAX TmnxL2tpTuProtStatsType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerProtStatsType indicates the type of L2TP protocol statistics contained in this conceptual row." ::= { tmnxL2tpPeerProtStatsEntry 5 } tmnxL2tpPeerProtStatsInstance OBJECT-TYPE SYNTAX Unsigned32 (0..69 | 4294967294 | 4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerProtStatsInstance indicates the instance identifier of the statistics contained in this conceptual row. For example: if the value of the object tmnxL2tpPeerProtStatsType is equal to 'outgoingMsgType', the value of tmnxL2tpPeerProtStatsInstance is a message identifier, e.g. instance '2' refers to '(SCCRP) Start-Control-Connection-Reply', and the value of tmnxL2tpPeerProtStatsVal indicates the number of SCCRP messages transmitted for this tunnel. The value of this object is 4294967294 for Zero-Length Body (ZLB) messages. The value of this object is 4294967295 for incoming protocol messages with unknown values for message ID, return code or result code." ::= { tmnxL2tpPeerProtStatsEntry 6 } tmnxL2tpPeerProtStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerProtStatsName indicates the human-readable identifier of the statistics contained in this conceptual row. In the same example, the value of tmnxL2tpPeerProtStatsName is '(SCCRP) Start-Control-Connection-Reply'." ::= { tmnxL2tpPeerProtStatsEntry 7 } tmnxL2tpPeerProtStatsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpPeerProtStatsVal indicates the value of the statistics contained in this conceptual row." ::= { tmnxL2tpPeerProtStatsEntry 8 } tmnxL2tpPeerOpObjs OBJECT IDENTIFIER ::= { tmnxL2tpPeerObjs 2 } tmnxL2tpPeerDrainTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpPeerDrainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpPeerDrainTable has an entry for each L2TP peer." ::= { tmnxL2tpPeerOpObjs 1 } tmnxL2tpPeerDrainEntry OBJECT-TYPE SYNTAX TmnxL2tpPeerDrainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry presents an operations interface to drain all tunnels between this system and a particular L2TP peer. Rows are created or removed automatically by the system." INDEX { vRtrID, tmnxL2tpTuStatusTransportType, tmnxL2tpTuStatusPeerAddrType, tmnxL2tpTuStatusPeerAddr, tmnxL2tpTuStatusRemoteUdpPort } ::= { tmnxL2tpPeerDrainTable 1 } TmnxL2tpPeerDrainEntry ::= SEQUENCE { tmnxL2tpPeerDrain TmnxL2tpActionTypeDrain } tmnxL2tpPeerDrain OBJECT-TYPE SYNTAX TmnxL2tpActionTypeDrain MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'drain (0)' triggers an attempt to drain all tunnels between this system and a particular L2TP peer. Setting it to 'stopDrain (1)' stops the draining. Reading this object returns the value 'notApplicable'." DEFVAL { notApplicable } ::= { tmnxL2tpPeerDrainEntry 1 } tmnxL2tpSessionObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 5 } tmnxL2tpSeStatObjs OBJECT IDENTIFIER ::= { tmnxL2tpSessionObjs 1 } tmnxL2tpSeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpSeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpSeStatusTable has an entry for each Layer Two Tunneling Protocol Session." ::= { tmnxL2tpSeStatObjs 1 } tmnxL2tpSeStatusEntry OBJECT-TYPE SYNTAX TmnxL2tpSeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Session. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpSeStatusId } ::= { tmnxL2tpSeStatusTable 1 } TmnxL2tpSeStatusEntry ::= SEQUENCE { tmnxL2tpSeStatusId TmnxL2tpConnectionId, tmnxL2tpSeStatusState TmnxL2tpSeOperState, tmnxL2tpSeStatusTunnelId TmnxL2tpTunnelId, tmnxL2tpSeStatusTunnelConnId TmnxL2tpConnectionId, tmnxL2tpSeStatusSessionId TmnxL2tpSessionId, tmnxL2tpSeStatusRemoteTunnelId TmnxL2tpTunnelId, tmnxL2tpSeStatusRemoteSessionId TmnxL2tpSessionId, tmnxL2tpSeStatusRemoteConnId TmnxL2tpConnectionId, tmnxL2tpSeStatusStartTime TimeStamp, tmnxL2tpSeStatusEstabTime TimeStamp, tmnxL2tpSeStatusClosedTime TimeStamp, tmnxL2tpSeStatusCdnResult TmnxL2tpCdnResult, tmnxL2tpSeStatusGeneralError TmnxL2tpGeneralError, tmnxL2tpSeStatusErrorMessage TmnxL2tpErrorMessage, tmnxL2tpSeStatusMlpppBundleIndex Unsigned32, tmnxL2tpSeStatusPwType TmnxL2tpStatPwType } tmnxL2tpSeStatusId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusId indicates the local identifier of this Layer Two Tunneling Protocol Session. In L2TP version 2, it contains the 16-bit session ID in the lower order bits and the 16-bit tunnel ID in the higher order bits. In L2TP version 3, it is equal to the most significant 16-bit of the connection ID." ::= { tmnxL2tpSeStatusEntry 1 } tmnxL2tpSeStatusState OBJECT-TYPE SYNTAX TmnxL2tpSeOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpSeStatusState indicates the operational state of this Layer Two Tunneling Protocol Session." ::= { tmnxL2tpSeStatusEntry 2 } tmnxL2tpSeStatusTunnelId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusTunnelId indicates the identifier of the L2TP tunnel associated with this Layer Two Tunneling Protocol Session, when L2TP version 2 is used. In L2TP version 3, it is equal to the most significant 16-bit of the control connection ID." ::= { tmnxL2tpSeStatusEntry 3 } tmnxL2tpSeStatusTunnelConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusTunnelConnId indicates the identifier of the L2TP tunnel associated with this Layer Two Tunneling Protocol Session." ::= { tmnxL2tpSeStatusEntry 4 } tmnxL2tpSeStatusSessionId OBJECT-TYPE SYNTAX TmnxL2tpSessionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusSessionId indicates the identifier of this Layer Two Tunneling Protocol Session, when L2TP version 2 is used. In L2TP version 3, it is equal to the least significant 16-bit of the connection ID." ::= { tmnxL2tpSeStatusEntry 5 } tmnxL2tpSeStatusRemoteTunnelId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusRemoteTunnelId indicates the identifier used by the tunnel peer of the L2TP tunnel associated with this Layer Two Tunneling Protocol Session , when L2TP version 2 is used. In L2TP version 3, it is equal to zero." ::= { tmnxL2tpSeStatusEntry 6 } tmnxL2tpSeStatusRemoteSessionId OBJECT-TYPE SYNTAX TmnxL2tpSessionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusRemoteSessionId indicates the identifier of this Layer Two Tunneling Protocol Session used by the tunnel peer, when L2TP version 2 is used. In L2TP version 3, it is equal to zero." ::= { tmnxL2tpSeStatusEntry 7 } tmnxL2tpSeStatusRemoteConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusRemoteConnId indicates the identifier of this Layer Two Tunneling Protocol Session used by the tunnel peer." ::= { tmnxL2tpSeStatusEntry 8 } tmnxL2tpSeStatusStartTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusStartTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Session entered either the state 'idle', 'waitTunnel', 'waitReply' or 'waitAcceptance'." ::= { tmnxL2tpSeStatusEntry 9 } tmnxL2tpSeStatusEstabTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusEstabTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Session entered the state 'established'. The value zero means that this session has not been established yet." ::= { tmnxL2tpSeStatusEntry 10 } tmnxL2tpSeStatusClosedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusClosedTime indicates the value of sysUpTime when this Layer Two Tunneling Protocol Session entered one of the closed states. The value zero means that this session has not been closed yet." ::= { tmnxL2tpSeStatusEntry 11 } tmnxL2tpSeStatusCdnResult OBJECT-TYPE SYNTAX TmnxL2tpCdnResult MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpSeStatusCdnResult indicates the result of a CDN (Call-Disconnect-Notify) message related to this Layer Two Tunneling Protocol Session." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." ::= { tmnxL2tpSeStatusEntry 12 } tmnxL2tpSeStatusGeneralError OBJECT-TYPE SYNTAX TmnxL2tpGeneralError MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpSeStatusGeneralError indicates an general error related to this Layer Two Tunneling Protocol Session." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." ::= { tmnxL2tpSeStatusEntry 13 } tmnxL2tpSeStatusErrorMessage OBJECT-TYPE SYNTAX TmnxL2tpErrorMessage MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusErrorMessage describes an error related to this Layer Two Tunneling Protocol Session." REFERENCE "RFC 2661 Layer Two Tunneling Protocol 'L2TP', section 4.4.2 Result and Error Codes." ::= { tmnxL2tpSeStatusEntry 14 } tmnxL2tpSeStatusMlpppBundleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusMlpppBundleIndex indicates the identifier of the MLPPP Bundle related to this Layer Two Tunneling Protocol Session. If an MLPPP bundle is associated with this session, the value of tmnxL2tpSeStatusMlpppBundleIndex is equal to the value of tmnxL2tpLacMlpppBundleIndex of the corresponding row in the tmnxL2tpLacMlpppBundleTable, in the same virtual router instance. If no MLPPP bundle is associated with this session, the value of this object is equal to zero." ::= { tmnxL2tpSeStatusEntry 20 } tmnxL2tpSeStatusPwType OBJECT-TYPE SYNTAX TmnxL2tpStatPwType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusPwType indicates the Pseudo Wire type of the Layer Two Tunneling Protocol session." ::= { tmnxL2tpSeStatusEntry 21 } tmnxL2tpLnsSePppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsSePppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpLnsSePppTable has an entry for each Layer Two Tunneling Protocol Session for which this system acts as LNS." ::= { tmnxL2tpSeStatObjs 2 } tmnxL2tpLnsSePppEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsSePppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Session. Entries in this table are created and destroyed by the system. In release 9.0 and higher, this information is in the SUBSCRIBER-MGMT-MIB::tmnxSubPppTable. The corresponding row in that table can be directly retrieved using the value of the object tmnxL2tpLnsSePppSubPppIndex." INDEX { vRtrID, tmnxL2tpSeStatusId } ::= { tmnxL2tpLnsSePppTable 1 } TmnxL2tpLnsSePppEntry ::= SEQUENCE { tmnxL2tpLnsSePppUpTime TimeTicks, tmnxL2tpLnsSePppLcpState TmnxPppCpState, tmnxL2tpLnsSePppIpcpState TmnxPppCpState, tmnxL2tpLnsSePppPppMtu Unsigned32, tmnxL2tpLnsSePppPppAuthProtocol INTEGER, tmnxL2tpLnsSePppPppUserName TmnxPppoeUserNameOrEmpty, tmnxL2tpLnsSePppSubIdent TmnxSubIdentStringOrEmpty, tmnxL2tpLnsSePppOriginSubIdent TmnxPppoeSessionInfoOrigin, tmnxL2tpLnsSePppSubProfString TmnxSubProfileStringOrEmpty, tmnxL2tpLnsSePppSlaProfString TmnxSlaProfileStringOrEmpty, tmnxL2tpLnsSePppAncpString TmnxAncpStringOrZero, tmnxL2tpLnsSePppInterDestId TmnxSubMgtIntDestIdOrEmpty, tmnxL2tpLnsSePppAppProfString TmnxAppProfileStringOrEmpty, tmnxL2tpLnsSePppOriginStrings TmnxPppoeSessionInfoOrigin, tmnxL2tpLnsSePppSessionTimeout Unsigned32, tmnxL2tpLnsSePppIpAddrType InetAddressType, tmnxL2tpLnsSePppIpAddr InetAddress, tmnxL2tpLnsSePppPrimaryDnsType InetAddressType, tmnxL2tpLnsSePppPrimaryDns InetAddress, tmnxL2tpLnsSePppSecondaryDnsType InetAddressType, tmnxL2tpLnsSePppSecondaryDns InetAddress, tmnxL2tpLnsSePppPrimaryNbnsType InetAddressType, tmnxL2tpLnsSePppPrimaryNbns InetAddress, tmnxL2tpLnsSePppSecondNbnsType InetAddressType, tmnxL2tpLnsSePppSecondNbns InetAddress, tmnxL2tpLnsSePppOriginIpcpInfo TmnxPppoeSessionInfoOrigin, tmnxL2tpLnsSePppCircuitId OCTET STRING, tmnxL2tpLnsSePppRemoteId OCTET STRING, tmnxL2tpLnsSePppAddressPool DisplayString, tmnxL2tpLnsSePppType TmnxPppoeSessionType, tmnxL2tpLnsSePppSvcId TmnxServId, tmnxL2tpLnsSePppGrpIf InterfaceIndexOrZero, tmnxL2tpLnsSePppL2tpVrtrId TmnxVRtrIDOrZero, tmnxL2tpLnsSePppL2tpConnectionId Unsigned32, tmnxL2tpLnsSePppCategoryMapName TNamedItemOrEmpty, tmnxL2tpLnsSePppRadiusClassAttr OCTET STRING, tmnxL2tpLnsSePppRadiusUserName DisplayString, tmnxL2tpLnsSePppIpv6cpState TmnxPppCpState, tmnxL2tpLnsSePppInterfaceId OCTET STRING, tmnxL2tpLnsSePppOriginIpv6cpInfo TmnxPppoeSessionInfoOrigin, tmnxL2tpLnsSePppIpv6DnsType InetAddressType, tmnxL2tpLnsSePppIpv6Dns1 InetAddress, tmnxL2tpLnsSePppIpv6Dns2 InetAddress, tmnxL2tpLnsSePppIpv6DelPfxType InetAddressType, tmnxL2tpLnsSePppIpv6DelPfxLen InetAddressPrefixLength, tmnxL2tpLnsSePppIpv6DelPfx InetAddress, tmnxL2tpLnsSePppIpv6PrefixType InetAddressType, tmnxL2tpLnsSePppIpv6PrefixLen InetAddressPrefixLength, tmnxL2tpLnsSePppIpv6Prefix InetAddress, tmnxL2tpLnsSePppSubPppIndex Unsigned32 } tmnxL2tpLnsSePppUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppUpTime indicates how long (in hundredths of a second) that the session already exists in this table." ::= { tmnxL2tpLnsSePppEntry 3 } tmnxL2tpLnsSePppLcpState OBJECT-TYPE SYNTAX TmnxPppCpState MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppLcpState indicates the current state of the PPP Link Control Protocol of the session." ::= { tmnxL2tpLnsSePppEntry 4 } tmnxL2tpLnsSePppIpcpState OBJECT-TYPE SYNTAX TmnxPppCpState MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpcpState indicates the current state of the PPP IP Control Protocol of the session." ::= { tmnxL2tpLnsSePppEntry 5 } tmnxL2tpLnsSePppPppMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPppMtu indicates the PPP MTU of the session." ::= { tmnxL2tpLnsSePppEntry 6 } tmnxL2tpLnsSePppPppAuthProtocol OBJECT-TYPE SYNTAX INTEGER { none (1), pap (2), chap (3) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPppAuthProtocol indicates the PPP protocol used to authenticate the session. The value 'none' indicates that no PPP authentication was done. The value 'pap' indicates that authentication was done via the Password Authentication Protocol. The value 'chap' indicates that authentication was done via the Challenge-Handshake Authentication Protocol." ::= { tmnxL2tpLnsSePppEntry 7 } tmnxL2tpLnsSePppPppUserName OBJECT-TYPE SYNTAX TmnxPppoeUserNameOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPppUserName indicates the user name learned during the PPP authentication phase." ::= { tmnxL2tpLnsSePppEntry 8 } tmnxL2tpLnsSePppSubIdent OBJECT-TYPE SYNTAX TmnxSubIdentStringOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSubIdent indicates the subscriber applicable for this session. The value of tmnxL2tpLnsSePppOriginSubIdent indicates from what source this subscriber identification was received." ::= { tmnxL2tpLnsSePppEntry 9 } tmnxL2tpLnsSePppOriginSubIdent OBJECT-TYPE SYNTAX TmnxPppoeSessionInfoOrigin MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppOriginSubIdent indicates which source provided the subscriber." ::= { tmnxL2tpLnsSePppEntry 10 } tmnxL2tpLnsSePppSubProfString OBJECT-TYPE SYNTAX TmnxSubProfileStringOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSubProfString indicates the subscriber profile string applicable for this session. The value of tmnxL2tpLnsSePppOriginStrings indicates from what source this string was received." ::= { tmnxL2tpLnsSePppEntry 11 } tmnxL2tpLnsSePppSlaProfString OBJECT-TYPE SYNTAX TmnxSlaProfileStringOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSlaProfString indicates the SLA profile string applicable for this session. The value of tmnxL2tpLnsSePppOriginStrings indicates from what source this string was received." ::= { tmnxL2tpLnsSePppEntry 12 } tmnxL2tpLnsSePppAncpString OBJECT-TYPE SYNTAX TmnxAncpStringOrZero MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppAncpString indicates the ANCP string applicable for this session. The value of tmnxL2tpLnsSePppOriginStrings indicates from what source this string was received." ::= { tmnxL2tpLnsSePppEntry 13 } tmnxL2tpLnsSePppInterDestId OBJECT-TYPE SYNTAX TmnxSubMgtIntDestIdOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppInterDestId indicates the intermediate destination identifier applicable for this session. The value of tmnxL2tpLnsSePppOriginStrings indicates from what source this string was received." ::= { tmnxL2tpLnsSePppEntry 14 } tmnxL2tpLnsSePppAppProfString OBJECT-TYPE SYNTAX TmnxAppProfileStringOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppAppProfString indicates the application profile string applicable for this session. The value of tmnxL2tpLnsSePppOriginStrings indicates from what source this string was received." ::= { tmnxL2tpLnsSePppEntry 15 } tmnxL2tpLnsSePppOriginStrings OBJECT-TYPE SYNTAX TmnxPppoeSessionInfoOrigin MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppOriginStrings indicates which source provided the subscriber identification strings (subscriber profile string, SLA profile string, ANCP string, intermediate destination identifier and application profile string)." ::= { tmnxL2tpLnsSePppEntry 16 } tmnxL2tpLnsSePppSessionTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSessionTimeout indicates the session timeout received from the Radius server (if applicable)." ::= { tmnxL2tpLnsSePppEntry 17 } tmnxL2tpLnsSePppIpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpAddrType indicates the address type of tmnxL2tpLnsSePppIpAddr." ::= { tmnxL2tpLnsSePppEntry 18 } tmnxL2tpLnsSePppIpAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpAddr indicates the IP address of the session. The value of tmnxL2tpLnsSePppOriginIpcpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 19 } tmnxL2tpLnsSePppPrimaryDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPrimaryDnsType indicates the address type of tmnxL2tpLnsSePppPrimaryDns." ::= { tmnxL2tpLnsSePppEntry 20 } tmnxL2tpLnsSePppPrimaryDns OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPrimaryDns indicates the primary DNS server. The value of this object is ''H when not applicable. The value of tmnxL2tpLnsSePppOriginIpcpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 21 } tmnxL2tpLnsSePppSecondaryDnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSecondaryDnsType indicates the address type of tmnxL2tpLnsSePppSecondaryDns." ::= { tmnxL2tpLnsSePppEntry 22 } tmnxL2tpLnsSePppSecondaryDns OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSecondaryDns indicates the secondary DNS server. The value of this object is ''H when not applicable. The value of tmnxL2tpLnsSePppOriginIpcpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 23 } tmnxL2tpLnsSePppPrimaryNbnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPrimaryNbnsType indicates the address type of tmnxL2tpLnsSePppPrimaryNbns." ::= { tmnxL2tpLnsSePppEntry 24 } tmnxL2tpLnsSePppPrimaryNbns OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppPrimaryNbns indicates the primary NBNS server. The value of this object is ''H when not applicable. The value of tmnxL2tpLnsSePppOriginIpcpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 25 } tmnxL2tpLnsSePppSecondNbnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSecondNbnsType indicates the address type of tmnxL2tpLnsSePppSecondNbns." ::= { tmnxL2tpLnsSePppEntry 26 } tmnxL2tpLnsSePppSecondNbns OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSecondNbns indicates the secondary NBNS server. The value of this object is ''H when not applicable. The value of tmnxL2tpLnsSePppOriginIpcpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 27 } tmnxL2tpLnsSePppOriginIpcpInfo OBJECT-TYPE SYNTAX TmnxPppoeSessionInfoOrigin MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppOriginIpcpInfo indicates which source provided the IPCP information (IP, DNS and NBNS addresses)." ::= { tmnxL2tpLnsSePppEntry 28 } tmnxL2tpLnsSePppCircuitId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppCircuitId indicates the value of the circuit-id sub-option." ::= { tmnxL2tpLnsSePppEntry 29 } tmnxL2tpLnsSePppRemoteId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppRemoteId indicates the value of the remote-id sub-option." ::= { tmnxL2tpLnsSePppEntry 30 } tmnxL2tpLnsSePppAddressPool OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppAddressPool indicates the IP address pool which is used to search for an IP address for this session." ::= { tmnxL2tpLnsSePppEntry 31 } tmnxL2tpLnsSePppType OBJECT-TYPE SYNTAX TmnxPppoeSessionType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppType indicates the type of this session." ::= { tmnxL2tpLnsSePppEntry 32 } tmnxL2tpLnsSePppSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppSvcId indicates the service ID of the IES/VPRN service to which this session belongs." ::= { tmnxL2tpLnsSePppEntry 33 } tmnxL2tpLnsSePppGrpIf OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppGrpIf indicates the interface index of the group-interface to which this session belongs." ::= { tmnxL2tpLnsSePppEntry 34 } tmnxL2tpLnsSePppL2tpVrtrId OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppL2tpVrtrId indicates the virtual router ID of the L2TP session associated with this session. If there is no L2TP session associated with this session, the value of this object is equal to zero." ::= { tmnxL2tpLnsSePppEntry 35 } tmnxL2tpLnsSePppL2tpConnectionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppL2tpConnectionId indicates the connection ID of the L2TP session associated with this session. The values of tmnxL2tpLnsSePppL2tpVrtrId and tmnxL2tpLnsSePppL2tpConnectionId are the index in the table TIMETRA-L2TP-MIB::tmnxL2tpSeStatusTable of the L2TP session associated with this session. If there is no L2TP session associated with this session, the value of this object is equal to zero." ::= { tmnxL2tpLnsSePppEntry 36 } tmnxL2tpLnsSePppCategoryMapName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppCategoryMapName indicates the category map name applicable for this session. The value of tmnxL2tpLnsSePppOriginStrings indicates from what source this string was received." ::= { tmnxL2tpLnsSePppEntry 37 } tmnxL2tpLnsSePppRadiusClassAttr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppRadiusClassAttr indicates the Class attribute returned by the RADIUS server in an Access-Accept message. If no RADIUS authentication is performed for this session, or RADIUS did not return this attribute, the value of this object is empty." ::= { tmnxL2tpLnsSePppEntry 38 } tmnxL2tpLnsSePppRadiusUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppRadiusUserName indicates the User-Name attribute returned by the RADIUS server in an Access-Accept message. If RADIUS did not return this attribute, the value of this object is equal to the User-Name attribute sent in the original Access-Request message. If no RADIUS authentication is performed for this session, the value of this object is empty." ::= { tmnxL2tpLnsSePppEntry 39 } tmnxL2tpLnsSePppIpv6cpState OBJECT-TYPE SYNTAX TmnxPppCpState MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6cpState indicates the current state of the PPP IPv6 Control Protocol of the PPPoE session." ::= { tmnxL2tpLnsSePppEntry 40 } tmnxL2tpLnsSePppInterfaceId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppInterfaceId indicates the value of the remote-id sub-option inserted by the PPPoE intermediate agent." ::= { tmnxL2tpLnsSePppEntry 41 } tmnxL2tpLnsSePppOriginIpv6cpInfo OBJECT-TYPE SYNTAX TmnxPppoeSessionInfoOrigin MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppOriginIpv6cpInfo indicates which source provided the IPCP information (IP, DNS and NBNS addresses)." ::= { tmnxL2tpLnsSePppEntry 42 } tmnxL2tpLnsSePppIpv6DnsType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6DnsType indicates the address type of tmnxL2tpLnsSePppIpv6Dns1/2." ::= { tmnxL2tpLnsSePppEntry 43 } tmnxL2tpLnsSePppIpv6Dns1 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|16)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6Dns1 indicates the primary DNS server. The value of this object is ''H when not applicable. The value of tmnxL2tpLnsSePppOriginIpv6cpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 44 } tmnxL2tpLnsSePppIpv6Dns2 OBJECT-TYPE SYNTAX InetAddress (SIZE (0|16)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6Dns2 indicates the secondary DNS server. The value of this object is ''H when not applicable. The value of tmnxL2tpLnsSePppOriginIpv6cpInfo indicates from what source this IP address was received." ::= { tmnxL2tpLnsSePppEntry 45 } tmnxL2tpLnsSePppIpv6DelPfxType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6DelPfxType indicates the address type of tmnxL2tpLnsSePppIpv6DelPfx." ::= { tmnxL2tpLnsSePppEntry 46 } tmnxL2tpLnsSePppIpv6DelPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..128) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6DelPfxLen indicates the length of tmnxL2tpLnsSePppIpv6DelPfx." ::= { tmnxL2tpLnsSePppEntry 47 } tmnxL2tpLnsSePppIpv6DelPfx OBJECT-TYPE SYNTAX InetAddress (SIZE (0|16)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6DelPfx indicates the IPv6 prefix used for DHCPv6 prefix delegation." ::= { tmnxL2tpLnsSePppEntry 48 } tmnxL2tpLnsSePppIpv6PrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6PrefixType indicates the address type of tmnxL2tpLnsSePppIpv6Prefix." ::= { tmnxL2tpLnsSePppEntry 49 } tmnxL2tpLnsSePppIpv6PrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength (0..128) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6PrefixLen indicates the length of tmnxL2tpLnsSePppIpv6Prefix." ::= { tmnxL2tpLnsSePppEntry 50 } tmnxL2tpLnsSePppIpv6Prefix OBJECT-TYPE SYNTAX InetAddress (SIZE (0|16)) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppIpv6Prefix indicates the IPv6 prefix used for stateless address autoconfiguration." ::= { tmnxL2tpLnsSePppEntry 51 } tmnxL2tpLnsSePppSubPppIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLnsSePppSubPppIndex indicates the local identifier of the subscriber PPP session. It is the index of the corresponding conceptual row in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppTable." ::= { tmnxL2tpLnsSePppEntry 52 } tmnxL2tpLnsSePppStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsSePppStatEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The tmnxL2tpLnsSePppStatTable has an entry for each Layer Two Tunneling Protocol Session for which this system acts as LNS. This table is replaced with TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppStatTable." ::= { tmnxL2tpSeStatObjs 3 } tmnxL2tpLnsSePppStatEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsSePppStatEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Session. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpSeStatusId } ::= { tmnxL2tpLnsSePppStatTable 1 } TmnxL2tpLnsSePppStatEntry ::= SEQUENCE { tmnxL2tpLnsSePppStatRxUnkwnProto Counter32, tmnxL2tpLnsSePppStatRxLcpConfRq Counter32, tmnxL2tpLnsSePppStatRxLcpConfAk Counter32, tmnxL2tpLnsSePppStatRxLcpConfNk Counter32, tmnxL2tpLnsSePppStatRxLcpConfRj Counter32, tmnxL2tpLnsSePppStatRxLcpTermRq Counter32, tmnxL2tpLnsSePppStatRxLcpTermAk Counter32, tmnxL2tpLnsSePppStatRxLcpCodeRj Counter32, tmnxL2tpLnsSePppStatRxLcpEchoRq Counter32, tmnxL2tpLnsSePppStatRxLcpEchoRep Counter32, tmnxL2tpLnsSePppStatRxLcpProtRj Counter32, tmnxL2tpLnsSePppStatRxLcpDiscRq Counter32, tmnxL2tpLnsSePppStatTxLcpConfRq Counter32, tmnxL2tpLnsSePppStatTxLcpConfAk Counter32, tmnxL2tpLnsSePppStatTxLcpConfNk Counter32, tmnxL2tpLnsSePppStatTxLcpConfRj Counter32, tmnxL2tpLnsSePppStatTxLcpTermRq Counter32, tmnxL2tpLnsSePppStatTxLcpTermAk Counter32, tmnxL2tpLnsSePppStatTxLcpCodeRj Counter32, tmnxL2tpLnsSePppStatTxLcpEchoRq Counter32, tmnxL2tpLnsSePppStatTxLcpEchoRep Counter32, tmnxL2tpLnsSePppStatTxLcpProtRj Counter32, tmnxL2tpLnsSePppStatTxLcpDiscRq Counter32, tmnxL2tpLnsSePppStatRxPapAuthRq Counter32, tmnxL2tpLnsSePppStatTxPapAuthAk Counter32, tmnxL2tpLnsSePppStatTxPapAuthNk Counter32, tmnxL2tpLnsSePppStatRxChapResp Counter32, tmnxL2tpLnsSePppStatTxChapChall Counter32, tmnxL2tpLnsSePppStatTxChapSucc Counter32, tmnxL2tpLnsSePppStatTxChapFail Counter32, tmnxL2tpLnsSePppStatRxIpcpConfRq Counter32, tmnxL2tpLnsSePppStatRxIpcpConfAk Counter32, tmnxL2tpLnsSePppStatRxIpcpConfNk Counter32, tmnxL2tpLnsSePppStatRxIpcpConfRj Counter32, tmnxL2tpLnsSePppStatRxIpcpTermRq Counter32, tmnxL2tpLnsSePppStatRxIpcpTermAk Counter32, tmnxL2tpLnsSePppStatRxIpcpCodeRj Counter32, tmnxL2tpLnsSePppStatTxIpcpConfRq Counter32, tmnxL2tpLnsSePppStatTxIpcpConfAk Counter32, tmnxL2tpLnsSePppStatTxIpcpConfNk Counter32, tmnxL2tpLnsSePppStatTxIpcpConfRj Counter32, tmnxL2tpLnsSePppStatTxIpcpTermRq Counter32, tmnxL2tpLnsSePppStatTxIpcpTermAk Counter32, tmnxL2tpLnsSePppStatTxIpcpCodeRj Counter32, tmnxL2tpLnsSePppStatRxIpv6cpCfRq Counter32, tmnxL2tpLnsSePppStatRxIpv6cpCfAk Counter32, tmnxL2tpLnsSePppStatRxIpv6cpCfNk Counter32, tmnxL2tpLnsSePppStatRxIpv6cpCfRj Counter32, tmnxL2tpLnsSePppStatRxIpv6cpTmRq Counter32, tmnxL2tpLnsSePppStatRxIpv6cpTmAk Counter32, tmnxL2tpLnsSePppStatRxIpv6cpCdRj Counter32, tmnxL2tpLnsSePppStatTxIpv6cpCfRq Counter32, tmnxL2tpLnsSePppStatTxIpv6cpCfAk Counter32, tmnxL2tpLnsSePppStatTxIpv6cpCfNk Counter32, tmnxL2tpLnsSePppStatTxIpv6cpCfRj Counter32, tmnxL2tpLnsSePppStatTxIpv6cpTmRq Counter32, tmnxL2tpLnsSePppStatTxIpv6cpTmAk Counter32, tmnxL2tpLnsSePppStatTxIpv6cpCdRj Counter32 } tmnxL2tpLnsSePppStatRxUnkwnProto OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxUnkwnProto indicates the number of packets with unknown PPP protocol received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 2 } tmnxL2tpLnsSePppStatRxLcpConfRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpConfRq indicates the number of LCP configure requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 3 } tmnxL2tpLnsSePppStatRxLcpConfAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpConfAk indicates the number of LCP configure acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 4 } tmnxL2tpLnsSePppStatRxLcpConfNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpConfNk indicates the number of negative LCP configure acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 5 } tmnxL2tpLnsSePppStatRxLcpConfRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpConfRj indicates the number of LCP configure rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 6 } tmnxL2tpLnsSePppStatRxLcpTermRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpTermRq indicates the number of LCP terminate requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 7 } tmnxL2tpLnsSePppStatRxLcpTermAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpTermAk indicates the number of LCP terminate acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 8 } tmnxL2tpLnsSePppStatRxLcpCodeRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpCodeRj indicates the number of LCP code rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 9 } tmnxL2tpLnsSePppStatRxLcpEchoRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpEchoRq indicates the number of LCP echo requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 10 } tmnxL2tpLnsSePppStatRxLcpEchoRep OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpEchoRep indicates the number of LCP echo replies received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 11 } tmnxL2tpLnsSePppStatRxLcpProtRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpProtRj indicates the number of LCP protocol rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 12 } tmnxL2tpLnsSePppStatRxLcpDiscRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxLcpDiscRq indicates the number of LCP discard requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 13 } tmnxL2tpLnsSePppStatTxLcpConfRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpConfRq indicates the number of LCP configure requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 14 } tmnxL2tpLnsSePppStatTxLcpConfAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpConfAk indicates the number of LCP configure acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 15 } tmnxL2tpLnsSePppStatTxLcpConfNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpConfNk indicates the number of negative LCP configure acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 16 } tmnxL2tpLnsSePppStatTxLcpConfRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpConfRj indicates the number of LCP configure rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 17 } tmnxL2tpLnsSePppStatTxLcpTermRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpTermRq indicates the number of LCP terminate requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 18 } tmnxL2tpLnsSePppStatTxLcpTermAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpTermAk indicates the number of LCP terminate acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 19 } tmnxL2tpLnsSePppStatTxLcpCodeRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpCodeRj indicates the number of LCP code rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 20 } tmnxL2tpLnsSePppStatTxLcpEchoRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpEchoRq indicates the number of LCP echo requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 21 } tmnxL2tpLnsSePppStatTxLcpEchoRep OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpEchoRep indicates the number of LCP echo replies transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 22 } tmnxL2tpLnsSePppStatTxLcpProtRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpProtRj indicates the number of LCP protocol rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 23 } tmnxL2tpLnsSePppStatTxLcpDiscRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxLcpDiscRq indicates the number of LCP discard requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 24 } tmnxL2tpLnsSePppStatRxPapAuthRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxPapAuthRq indicates the number of PAP authentication requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 25 } tmnxL2tpLnsSePppStatTxPapAuthAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxPapAuthAk indicates the number of PAP authentication acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 26 } tmnxL2tpLnsSePppStatTxPapAuthNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxPapAuthNk indicates the number of negative PAP authentication acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 27 } tmnxL2tpLnsSePppStatRxChapResp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxChapResp indicates the number of CHAP authentication responses received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 28 } tmnxL2tpLnsSePppStatTxChapChall OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxChapChall indicates the number of CHAP authentication challenges transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 29 } tmnxL2tpLnsSePppStatTxChapSucc OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxChapSucc indicates the number of CHAP authentication acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 30 } tmnxL2tpLnsSePppStatTxChapFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxChapFail indicates the number of negative CHAP authentication acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 31 } tmnxL2tpLnsSePppStatRxIpcpConfRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpConfRq indicates the number of IPCP configure requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 32 } tmnxL2tpLnsSePppStatRxIpcpConfAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpConfAk indicates the number of IPCP configure acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 33 } tmnxL2tpLnsSePppStatRxIpcpConfNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpConfNk indicates the number of negative IPCP configure acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 34 } tmnxL2tpLnsSePppStatRxIpcpConfRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpConfRj indicates the number of IPCP configure rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 35 } tmnxL2tpLnsSePppStatRxIpcpTermRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpTermRq indicates the number of IPCP terminate requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 36 } tmnxL2tpLnsSePppStatRxIpcpTermAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpTermAk indicates the number of IPCP terminate acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 37 } tmnxL2tpLnsSePppStatRxIpcpCodeRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpcpCodeRj indicates the number of IPCP code rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 38 } tmnxL2tpLnsSePppStatTxIpcpConfRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpConfRq indicates the number of IPCP configure requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 39 } tmnxL2tpLnsSePppStatTxIpcpConfAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpConfAk indicates the number of IPCP configure acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 40 } tmnxL2tpLnsSePppStatTxIpcpConfNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpConfNk indicates the number of negative IPCP configure acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 41 } tmnxL2tpLnsSePppStatTxIpcpConfRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpConfRj indicates the number of IPCP configure rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 42 } tmnxL2tpLnsSePppStatTxIpcpTermRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpTermRq indicates the number of IPCP terminate requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 43 } tmnxL2tpLnsSePppStatTxIpcpTermAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpTermAk indicates the number of IPCP terminate acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 44 } tmnxL2tpLnsSePppStatTxIpcpCodeRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpcpCodeRj indicates the number of IPCP code rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 45 } tmnxL2tpLnsSePppStatRxIpv6cpCfRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpCfRq indicates the number of IPv6 Control Protocol (IPv6CP) configure requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 46 } tmnxL2tpLnsSePppStatRxIpv6cpCfAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpCfAk indicates the number of IPv6CP configure acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 47 } tmnxL2tpLnsSePppStatRxIpv6cpCfNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpCfNk indicates the number of negative IPv6CP configure acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 48 } tmnxL2tpLnsSePppStatRxIpv6cpCfRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpCfRj indicates the number of IPv6CP configure rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 49 } tmnxL2tpLnsSePppStatRxIpv6cpTmRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpTmRq indicates the number of IPv6CP terminate requests received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 50 } tmnxL2tpLnsSePppStatRxIpv6cpTmAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpTmAk indicates the number of IPv6CP terminate acknowledgements received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 51 } tmnxL2tpLnsSePppStatRxIpv6cpCdRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatRxIpv6cpCdRj indicates the number of IPv6CP code rejects received for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 52 } tmnxL2tpLnsSePppStatTxIpv6cpCfRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpCfRq indicates the number of IPv6CP configure requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 53 } tmnxL2tpLnsSePppStatTxIpv6cpCfAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpCfAk indicates the number of IPv6CP configure acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 54 } tmnxL2tpLnsSePppStatTxIpv6cpCfNk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpCfNk indicates the number of negative IPv6CP configure acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 55 } tmnxL2tpLnsSePppStatTxIpv6cpCfRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpCfRj indicates the number of IPv6CP configure rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 56 } tmnxL2tpLnsSePppStatTxIpv6cpTmRq OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpTmRq indicates the number of IPv6CP terminate requests transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 57 } tmnxL2tpLnsSePppStatTxIpv6cpTmAk OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpTmAk indicates the number of IPv6CP terminate acknowledgements transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 58 } tmnxL2tpLnsSePppStatTxIpv6cpCdRj OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSePppStatTxIpv6cpCdRj indicates the number of IPv6CP code rejects transmitted for this PPP session." ::= { tmnxL2tpLnsSePppStatEntry 59 } tmnxL2tpLnsSeMRtTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsSeMRtEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The tmnxL2tpLnsSeMRtTable contains managed routes for Layer Two Tunneling Protocol Sessions for which this system acts as LNS. This table is replaced with TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppMRtTable" ::= { tmnxL2tpSeStatObjs 4 } tmnxL2tpLnsSeMRtEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsSeMRtEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each conceptual row represents a managed route of a L2TP session for which this system acts as LNS." INDEX { vRtrID, tmnxL2tpSeStatusId, tmnxL2tpLnsSeMRtAddrType, tmnxL2tpLnsSeMRtAddr, tmnxL2tpLnsSeMRtPrefixLen } ::= { tmnxL2tpLnsSeMRtTable 1 } TmnxL2tpLnsSeMRtEntry ::= SEQUENCE { tmnxL2tpLnsSeMRtAddrType InetAddressType, tmnxL2tpLnsSeMRtAddr InetAddress, tmnxL2tpLnsSeMRtPrefixLen InetAddressPrefixLength, tmnxL2tpLnsSeMRtStatus TmnxManagedRouteStatus } tmnxL2tpLnsSeMRtAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeMRtAddrType indicates the address type of tmnxL2tpLnsSeMRtAddr." ::= { tmnxL2tpLnsSeMRtEntry 1 } tmnxL2tpLnsSeMRtAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeMRtAddr indicates the IP address of the managed route." ::= { tmnxL2tpLnsSeMRtEntry 2 } tmnxL2tpLnsSeMRtPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeMRtPrefixLen indicates the prefix length of the subnet associated with tmnxL2tpLnsSeMRtAddr." ::= { tmnxL2tpLnsSeMRtEntry 3 } tmnxL2tpLnsSeMRtStatus OBJECT-TYPE SYNTAX TmnxManagedRouteStatus MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeMRtStatus indicates the state of this managed route." ::= { tmnxL2tpLnsSeMRtEntry 4 } tmnxL2tpLnsSeOvrTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsSeOvrEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The tmnxL2tpLnsSeOvrTable contains QoS (Quality of Service) overrides for Layer Two Tunneling Protocol Sessions for which this system acts as LNS. This table is replaced with TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppOvrTable." ::= { tmnxL2tpSeStatObjs 6 } tmnxL2tpLnsSeOvrEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsSeOvrEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each conceptual row represents QoS overrides information of a L2TP session for which this system acts as LNS." INDEX { vRtrID, tmnxL2tpSeStatusId, tmnxL2tpLnsSeOvrDirection, tmnxL2tpLnsSeOvrType, tmnxL2tpLnsSeOvrTypeId, tmnxL2tpLnsSeOvrTypeName } ::= { tmnxL2tpLnsSeOvrTable 1 } TmnxL2tpLnsSeOvrEntry ::= SEQUENCE { tmnxL2tpLnsSeOvrDirection TDirectionIngEgr, tmnxL2tpLnsSeOvrType TQosOverrideType, tmnxL2tpLnsSeOvrTypeId Integer32, tmnxL2tpLnsSeOvrTypeName TNamedItemOrEmpty, tmnxL2tpLnsSeOvrPIR TPIRRateOverride, tmnxL2tpLnsSeOvrCIR TCIRRateOverride, tmnxL2tpLnsSeOvrCBS TBurstSizeBytesOverride, tmnxL2tpLnsSeOvrMBS TBurstSizeBytesOverride } tmnxL2tpLnsSeOvrDirection OBJECT-TYPE SYNTAX TDirectionIngEgr MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrDirection indicates if this row specifies ingress or egress qos override parameters." ::= { tmnxL2tpLnsSeOvrEntry 1 } tmnxL2tpLnsSeOvrType OBJECT-TYPE SYNTAX TQosOverrideType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrType indicates what field has been overridden by this row." ::= { tmnxL2tpLnsSeOvrEntry 2 } tmnxL2tpLnsSeOvrTypeId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrTypeId indicates the ID of the queue/policer that has been overridden by this row. If the value of tmnxL2tpLnsSeOvrType is not 'queue (1)' or 'policer (2)', this field must be set to zero (0)." ::= { tmnxL2tpLnsSeOvrEntry 3 } tmnxL2tpLnsSeOvrTypeName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrTypeName indicates the name of the scheduler/arbiter that has been overridden by this row. If the value of tmnxL2tpLnsSeOvrType is not 'arbiter (4)' or 'scheduler (5)', this field must be set to zero (0)." ::= { tmnxL2tpLnsSeOvrEntry 4 } tmnxL2tpLnsSeOvrPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrPIR indicates the PIR rate in kbps allowed for the object overridden by this row." ::= { tmnxL2tpLnsSeOvrEntry 5 } tmnxL2tpLnsSeOvrCIR OBJECT-TYPE SYNTAX TCIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrCIR indicates the CIR rate in kbps allowed for the object overridden by this row." ::= { tmnxL2tpLnsSeOvrEntry 6 } tmnxL2tpLnsSeOvrCBS OBJECT-TYPE SYNTAX TBurstSizeBytesOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrCBS indicates the amount of reserved buffer space (in bytes) for the object overridden by this row." ::= { tmnxL2tpLnsSeOvrEntry 7 } tmnxL2tpLnsSeOvrMBS OBJECT-TYPE SYNTAX TBurstSizeBytesOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeOvrMBS indicates the maximum amount of reserved buffer space (in bytes) for the object overridden by this row." ::= { tmnxL2tpLnsSeOvrEntry 8 } tmnxL2tpLnsSeAleTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsSeAleEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The tmnxL2tpLnsSeAleTable contains Access Loop Encapsulation information for Layer Two Tunneling Protocol Sessions for which this system acts as LNS. This table is replaced with TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppAleTable." ::= { tmnxL2tpSeStatObjs 7 } tmnxL2tpLnsSeAleEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsSeAleEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each conceptual row represents access loop encapsulation information of a L2TP session for which this system acts as LNS." INDEX { vRtrID, tmnxL2tpSeStatusId } ::= { tmnxL2tpLnsSeAleTable 1 } TmnxL2tpLnsSeAleEntry ::= SEQUENCE { tmnxL2tpLnsSeAleDatalink TmnxAccessLoopEncapDataLink, tmnxL2tpLnsSeAleEncaps1 TmnxAccessLoopEncaps1, tmnxL2tpLnsSeAleEncaps2 TmnxAccessLoopEncaps2 } tmnxL2tpLnsSeAleDatalink OBJECT-TYPE SYNTAX TmnxAccessLoopEncapDataLink MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeAleDatalink indicates the data link used by the subscriber host on the DSL access loop." ::= { tmnxL2tpLnsSeAleEntry 1 } tmnxL2tpLnsSeAleEncaps1 OBJECT-TYPE SYNTAX TmnxAccessLoopEncaps1 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeAleEncaps1 indicates the encapsulation used by the subscriber host on the DSL access loop." ::= { tmnxL2tpLnsSeAleEntry 2 } tmnxL2tpLnsSeAleEncaps2 OBJECT-TYPE SYNTAX TmnxAccessLoopEncaps2 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxL2tpLnsSeAleEncaps2 indicates the encapsulation used by the subscriber host on the DSL access loop." ::= { tmnxL2tpLnsSeAleEntry 3 } tmnxL2tpV3SeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpV3SeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpV3SeStatusTable has an entry for each Layer Two Tunneling Protocol session, where the protocol version 3 is supported. This table is related to the tmnxL2tpSeStatusTable table." ::= { tmnxL2tpSeStatObjs 8 } tmnxL2tpV3SeStatusEntry OBJECT-TYPE SYNTAX TmnxL2tpV3SeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol V3 session. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpSeStatusId } ::= { tmnxL2tpV3SeStatusTable 1 } TmnxL2tpV3SeStatusEntry ::= SEQUENCE { tmnxL2tpV3SeStatCookieInRx OCTET STRING, tmnxL2tpV3SeStatCookieInTx OCTET STRING, tmnxL2tpV3SeStatEndPoint OCTET STRING, tmnxL2tpV3SeStatEndPointDesc TItemDescription, tmnxL2tpV3SeStatPWType TmnxL2tpStatPwType, tmnxL2tpV3SeStatSeqNumInRx TmnxL2tpPresentInPacketType, tmnxL2tpV3SeStatSeqNumInTx TmnxL2tpPresentInPacketType, tmnxL2tpV3SeStatSubLayerInRx TruthValue, tmnxL2tpV3SeStatSubLayerInTx TruthValue } tmnxL2tpV3SeStatCookieInRx OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatCookieInRx indicates the cookie used in the received data packets." ::= { tmnxL2tpV3SeStatusEntry 1 } tmnxL2tpV3SeStatCookieInTx OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatCookieInTx indicates the cookie used in the transmitted data packets." ::= { tmnxL2tpV3SeStatusEntry 2 } tmnxL2tpV3SeStatEndPoint OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..250)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatEndPoint indicates the End Point identification for this session." ::= { tmnxL2tpV3SeStatusEntry 3 } tmnxL2tpV3SeStatEndPointDesc OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatEndPointDesc indicates the End Point description for this session." ::= { tmnxL2tpV3SeStatusEntry 4 } tmnxL2tpV3SeStatPWType OBJECT-TYPE SYNTAX TmnxL2tpStatPwType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatPWType indicates the Pseudo Wire type for this session." ::= { tmnxL2tpV3SeStatusEntry 5 } tmnxL2tpV3SeStatSeqNumInRx OBJECT-TYPE SYNTAX TmnxL2tpPresentInPacketType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatSeqNumInRx indicates under which condition the sequence number is present in received data packets." ::= { tmnxL2tpV3SeStatusEntry 6 } tmnxL2tpV3SeStatSeqNumInTx OBJECT-TYPE SYNTAX TmnxL2tpPresentInPacketType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatSeqNumInTx indicates under which condition the sequence number is present in transmitted data packets." ::= { tmnxL2tpV3SeStatusEntry 7 } tmnxL2tpV3SeStatSubLayerInRx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatSubLayerInRx indicates whether the Layer Two sub-layer is present in the received data packets or not." ::= { tmnxL2tpV3SeStatusEntry 8 } tmnxL2tpV3SeStatSubLayerInTx OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatSubLayerInTx indicates whether the Layer Two sub-layer is present in the transmitted data packets or not." ::= { tmnxL2tpV3SeStatusEntry 9 } tmnxL2tpV3EthTunStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpV3EthTunStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpV3EthTunStatTable has an entry for each Layer Two Tunneling Protocol ethernet tunnel over L2TP protocol version 3." ::= { tmnxL2tpSeStatObjs 9 } tmnxL2tpV3EthTunStatEntry OBJECT-TYPE SYNTAX TmnxL2tpV3EthTunStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol V3 ethernet tunnel specific session. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpV3EthTunStatTgName, tmnxL2tpV3EthTunStatVCId } ::= { tmnxL2tpV3EthTunStatTable 1 } TmnxL2tpV3EthTunStatEntry ::= SEQUENCE { tmnxL2tpV3EthTunStatTgName TmnxL2tpTunnelGroupName, tmnxL2tpV3EthTunStatVCId TmnxVcId, tmnxL2tpV3EthTunStatLocConnId TmnxL2tpConnectionId, tmnxL2tpV3EthTunStatDownReason TItemDescription, tmnxL2tpV3EthTunStatReconIvl Unsigned32, tmnxL2tpV3EthTunStatReconTimeRem Unsigned32, tmnxL2tpV3EthTunStatSapEncapVal TmnxEncapVal, tmnxL2tpV3EthTunStatSapPortId TmnxPortID, tmnxL2tpV3EthTunStatSapServId TmnxServId, tmnxL2tpV3EthTunStatCtrlConnId TmnxL2tpConnectionId, tmnxL2tpV3EthTunStatMatchesCfg TruthValue } tmnxL2tpV3EthTunStatTgName OBJECT-TYPE SYNTAX TmnxL2tpTunnelGroupName MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatTgName indicates the Tunnel Group name of a Layer Two Tunneling Protocol ethernet tunnel." ::= { tmnxL2tpV3EthTunStatEntry 1 } tmnxL2tpV3EthTunStatVCId OBJECT-TYPE SYNTAX TmnxVcId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatVCId indicates the Virtual Circuit Id of a Layer Two Tunneling Protocol ethernet tunnel." ::= { tmnxL2tpV3EthTunStatEntry 2 } tmnxL2tpV3EthTunStatLocConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatLocConnId indicates the Local Connection Id of a Layer Two Tunneling Protocol ethernet tunnel." ::= { tmnxL2tpV3EthTunStatEntry 3 } tmnxL2tpV3EthTunStatDownReason OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatDownReason indicates the reason for the ethernet tunnel not being established for a Layer Two Tunneling Protocol ethernet tunnel. The reason will be empty in case the tmnxL2tpV3EthTunStatLocConnId is not zero, which means the ethernet tunnel has been established." ::= { tmnxL2tpV3EthTunStatEntry 4 } tmnxL2tpV3EthTunStatReconIvl OBJECT-TYPE SYNTAX Unsigned32 (0..3600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatReconIvl indicates the Layer Two Tunneling Protocol reconnect interval for an ethernet tunnel. If the reconnect interval is zero, it means no interval has been set." ::= { tmnxL2tpV3EthTunStatEntry 5 } tmnxL2tpV3EthTunStatReconTimeRem OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatReconTimeRem indicates the Layer Two Tunneling Protocol remaining time before a reconnection attempt is made for an ethernet tunnel (see tmnxL2tpV3EthTunStatReconIvl)." ::= { tmnxL2tpV3EthTunStatEntry 6 } tmnxL2tpV3EthTunStatSapEncapVal OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatSapEncapVal indicates the private SAP Encapsulation Value of a Layer Two Tunneling Protocol ethernet tunnel." ::= { tmnxL2tpV3EthTunStatEntry 7 } tmnxL2tpV3EthTunStatSapPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatSapPortId indicates the private SAP Port Id of a Layer Two Tunneling Protocol ethernet tunnel." ::= { tmnxL2tpV3EthTunStatEntry 8 } tmnxL2tpV3EthTunStatSapServId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatSapServId indicates the private SAP Service Id of a Layer Two Tunneling Protocol ethernet tunnel." ::= { tmnxL2tpV3EthTunStatEntry 9 } tmnxL2tpV3EthTunStatCtrlConnId OBJECT-TYPE SYNTAX TmnxL2tpConnectionId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatCtrlConnId indicates the control connection Id of a Layer Two Tunneling Protocol ethernet tunnel for which the operational tunnel settings matches the tunnel group configuration." ::= { tmnxL2tpV3EthTunStatEntry 10 } tmnxL2tpV3EthTunStatMatchesCfg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatMatchesCfg indicates the Layer Two Tunneling Protocol ethernet tunnel operational settings matches the tunnel group configuration." ::= { tmnxL2tpV3EthTunStatEntry 11 } tmnxL2tpV3SeEthTuStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpV3SeEthTuStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpV3SeEthTuStatsTable has an entry for each Layer Two Tunneling Protocol session, where the protocol version 3 is supported and ethernet tunnels can be associated. This table is related to the tmnxL2tpV3SeStatusTable." ::= { tmnxL2tpSeStatObjs 10 } tmnxL2tpV3SeEthTuStatsEntry OBJECT-TYPE SYNTAX TmnxL2tpV3SeEthTuStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents ethernet tunnel statistics for a Layer Two Tunneling Protocol V3 session. Entries in this table are created and destroyed by the system. A conceptual row in this table exists for every row in the tmnxL2tpV3SeStatusTable where the value of the object tmnxL2tpSeStatusPwType is equal to 'ethernet' or 'ethernetVlan'." INDEX { vRtrID, tmnxL2tpSeStatusId } ::= { tmnxL2tpV3SeEthTuStatsTable 1 } TmnxL2tpV3SeEthTuStatsEntry ::= SEQUENCE { tmnxL2tpV3SeEthTuStatsRxPkts Counter64, tmnxL2tpV3SeEthTuStatsRxOctets Counter64, tmnxL2tpV3SeEthTuStatsRxErrors Counter64, tmnxL2tpV3SeEthTuStatsRxCookErr Counter64, tmnxL2tpV3SeEthTuStatsRxSeIdErr Counter64, tmnxL2tpV3SeEthTuStatsTxPkts Counter64, tmnxL2tpV3SeEthTuStatsTxOctets Counter64, tmnxL2tpV3SeEthTuStatsTxErrors Counter64 } tmnxL2tpV3SeEthTuStatsRxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsRxPkts indicates the number of packets received." ::= { tmnxL2tpV3SeEthTuStatsEntry 1 } tmnxL2tpV3SeEthTuStatsRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsRxOctets indicates the number of octets received." ::= { tmnxL2tpV3SeEthTuStatsEntry 2 } tmnxL2tpV3SeEthTuStatsRxErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsRxErrors indicates the number of packets dropped while receiving." ::= { tmnxL2tpV3SeEthTuStatsEntry 3 } tmnxL2tpV3SeEthTuStatsRxCookErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsRxCookErr indicates the number of packets dropped because the received Cookie value did not match the Cookie value negotiated during session establishment." ::= { tmnxL2tpV3SeEthTuStatsEntry 4 } tmnxL2tpV3SeEthTuStatsRxSeIdErr OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsRxSeIdErr indicates the number of packets dropped because the received Session ID value did not match the Session ID value negotiated during session establishment." ::= { tmnxL2tpV3SeEthTuStatsEntry 5 } tmnxL2tpV3SeEthTuStatsTxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsTxPkts indicates the number of packets transmitted." ::= { tmnxL2tpV3SeEthTuStatsEntry 6 } tmnxL2tpV3SeEthTuStatsTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsTxOctets indicates the number of octets transmitted." ::= { tmnxL2tpV3SeEthTuStatsEntry 7 } tmnxL2tpV3SeEthTuStatsTxErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpV3SeEthTuStatsTxErrors indicates the number of packets dropped while transmitting." ::= { tmnxL2tpV3SeEthTuStatsEntry 8 } tmnxL2tpSeOpObjs OBJECT IDENTIFIER ::= { tmnxL2tpSessionObjs 2 } tmnxL2tpSeStopTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpSeStopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpSeStopTable has an entry for each active Layer Two Tunneling Protocol Session." ::= { tmnxL2tpSeOpObjs 1 } tmnxL2tpSeStopEntry OBJECT-TYPE SYNTAX TmnxL2tpSeStopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row presents an operations interface to stop a Layer Two Tunneling Protocol session. Entries in this table are created and destroyed by the system." AUGMENTS { tmnxL2tpSeStatusEntry } ::= { tmnxL2tpSeStopTable 1 } TmnxL2tpSeStopEntry ::= SEQUENCE { tmnxL2tpSeStop TmnxActionType } tmnxL2tpSeStop OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'doAction (1)' triggers an attempt to stop the control connection for this L2TP session. Reading this object returns the value 'notApplicable'." DEFVAL { notApplicable } ::= { tmnxL2tpSeStopEntry 1 } tmnxL2tpLnsIsaObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 6 } tmnxL2tpLnsIsaGrpObjs OBJECT IDENTIFIER ::= { tmnxL2tpLnsIsaObjs 1 } tmnxL2tpIsaGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpIsaGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpIsaGrpTable contains objects to configure L2TP Integrated Service Adaptor (ISA) Groups. The ISA Groups are used for the L2TP Network Server (LNS) function. A L2TP ISA group is used to represent multiple hardware adaptors as a single entity, allowing for load balancing between multiple L2TP ISAs." ::= { tmnxL2tpLnsIsaGrpObjs 1 } tmnxL2tpIsaGrpEntry OBJECT-TYPE SYNTAX TmnxL2tpIsaGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a Layer Two Tunneling Protocol Integrated Service Adaptor Group. Entries in this table can be created or deleted via SNMP operations." INDEX { tmnxL2tpIsaGrpId } ::= { tmnxL2tpIsaGrpTable 1 } TmnxL2tpIsaGrpEntry ::= SEQUENCE { tmnxL2tpIsaGrpId TmnxL2tpIsaGrpId, tmnxL2tpIsaGrpRowStatus RowStatus, tmnxL2tpIsaGrpLastMgmtChange TimeStamp, tmnxL2tpIsaGrpDescription TItemDescription, tmnxL2tpIsaGrpAdminState TmnxAdminState, tmnxL2tpIsaGrpOperState TmnxOperState, tmnxL2tpIsaGrpPortPlcy TNamedItemOrEmpty } tmnxL2tpIsaGrpId OBJECT-TYPE SYNTAX TmnxL2tpIsaGrpId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaGrpId specifies the identifier of the L2TP Integrated Service Adaptor group." ::= { tmnxL2tpIsaGrpEntry 1 } tmnxL2tpIsaGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIsaGrpRowStatus specifies the row status of this row." ::= { tmnxL2tpIsaGrpEntry 2 } tmnxL2tpIsaGrpLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpIsaGrpLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpIsaGrpEntry 3 } tmnxL2tpIsaGrpDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIsaGrpDescription specifies the description of this L2TP ISA group." DEFVAL { "" } ::= { tmnxL2tpIsaGrpEntry 4 } tmnxL2tpIsaGrpAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIsaGrpAdminState specifies the administrative state of this L2TP ISA group." DEFVAL { outOfService } ::= { tmnxL2tpIsaGrpEntry 5 } tmnxL2tpIsaGrpOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpIsaGrpOperState indicates the operational status of this L2TP ISA group." ::= { tmnxL2tpIsaGrpEntry 6 } tmnxL2tpIsaGrpPortPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIsaGrpPortPlcy specifies the port policy of this L2TP ISA group. This object refers to a row in the TIMETRA-PORT-MIB::tmnxPortPlcyTable. If a port policy is associated with a L2TP ISA group, ports created for this group can take applicable configuration from that port policy." DEFVAL { "" } ::= { tmnxL2tpIsaGrpEntry 8 } tmnxL2tpLnsIsaMdaObjs OBJECT IDENTIFIER ::= { tmnxL2tpLnsIsaObjs 2 } tmnxL2tpIsaMdaTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpIsaMdaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpIsaMdaTable contains objects to configure the L2TP ISA Group Media Dependent Adapters (MDA)." ::= { tmnxL2tpLnsIsaMdaObjs 1 } tmnxL2tpIsaMdaEntry OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a L2TP ISA Media Dependent Adapter (MDA) of a L2TP ISA Group. Entries in this table can be created or deleted via SNMP operations." INDEX { tmnxL2tpIsaGrpId, tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum } ::= { tmnxL2tpIsaMdaTable 1 } TmnxL2tpIsaMdaEntry ::= SEQUENCE { tmnxL2tpIsaMdaRowStatus RowStatus, tmnxL2tpIsaMdaLastMgmtChange TimeStamp, tmnxL2tpIsaMdaDrain TruthValue, tmnxL2tpIsaMdaStop TmnxActionType } tmnxL2tpIsaMdaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIsaMdaRowStatus specifies the row status of this row." ::= { tmnxL2tpIsaMdaEntry 1 } tmnxL2tpIsaMdaLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpIsaMdaLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpIsaMdaEntry 2 } tmnxL2tpIsaMdaDrain OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpIsaMdaDrain specifies if this MDA is drained from LNS tunnels." ::= { tmnxL2tpIsaMdaEntry 3 } tmnxL2tpIsaMdaStop OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of tmnxL2tpIsaMdaStop to 'doAction' triggers an attempt to stop all PPP sessions on this L2TP ISA MDA. Reading the value of tmnxL2tpIsaMdaStop results in 'not-applicable'." ::= { tmnxL2tpIsaMdaEntry 4 } tmnxL2tpLnsIsaMdaStatObjs OBJECT IDENTIFIER ::= { tmnxL2tpLnsIsaObjs 3 } tmnxL2tpIsaMdaStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpIsaMdaStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpIsaMdaStatTable contains status and statistics information about the Media Dependent Adapters (MDA) of a L2TP ISA Group." ::= { tmnxL2tpLnsIsaMdaStatObjs 1 } tmnxL2tpIsaMdaStatEntry OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row contains status and statistics information about a Media Dependent Adapter (MDA) of a L2TP ISA Group. Entries in this table are created and removed automatically by the system." AUGMENTS { tmnxL2tpIsaMdaEntry } ::= { tmnxL2tpIsaMdaStatTable 1 } TmnxL2tpIsaMdaStatEntry ::= SEQUENCE { tmnxL2tpIsaMdaStatOperState TmnxL2tpIsaMdaOperState, tmnxL2tpIsaMdaStatSessions Gauge32 } tmnxL2tpIsaMdaStatOperState OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpIsaMdaStatOperState indicates the operational state of this L2TP ISA MDA." ::= { tmnxL2tpIsaMdaStatEntry 1 } tmnxL2tpIsaMdaStatSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpIsaMdaStatSessions indicates the actual number of PPP sessions on this L2TP ISA MDA." ::= { tmnxL2tpIsaMdaStatEntry 2 } tmnxL2tpIsaMdaVRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpIsaMdaVRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpIsaMdaVRtrTable contains status information about the L2TP ISA Group Media Dependent Adapters (MDA) with respect to the associated Virtual Routers." ::= { tmnxL2tpLnsIsaMdaStatObjs 2 } tmnxL2tpIsaMdaVRtrEntry OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaVRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents the association of a L2TP ISA Media Dependent Adapter (MDA) and a Virtual Router. Entries in this table are created and removed automatically by the system." INDEX { tmnxL2tpIsaGrpId, tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum, vRtrID } ::= { tmnxL2tpIsaMdaVRtrTable 1 } TmnxL2tpIsaMdaVRtrEntry ::= SEQUENCE { tmnxL2tpIsaMdaVRtrOperState TmnxOperState } tmnxL2tpIsaMdaVRtrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpIsaMdaVRtrOperState indicates the operational state of this L2TP ISA MDA with respect to this Virtual Router." ::= { tmnxL2tpIsaMdaVRtrEntry 1 } tmnxL2tpLnsIsaMdaStatisticsObjs OBJECT IDENTIFIER ::= { tmnxL2tpLnsIsaObjs 4 } tmnxL2tpIsaMdaStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpIsaMdaStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpIsaMdaStatisticsTable contains statistics information about the Media Dependent Adapters (MDA) of a L2TP ISA Group." ::= { tmnxL2tpLnsIsaMdaStatisticsObjs 1 } tmnxL2tpIsaMdaStatisticsEntry OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row contains statistics information about a Media Dependent Adapter (MDA) of a L2TP ISA Group. Entries in this table are created and removed automatically by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table." INDEX { tmnxL2tpIsaGrpId, tmnxChassisIndex, tmnxCardSlotNum, tmnxMDASlotNum, tmnxL2tpIsaMdaStatsInstance } ::= { tmnxL2tpIsaMdaStatisticsTable 1 } TmnxL2tpIsaMdaStatisticsEntry ::= SEQUENCE { tmnxL2tpIsaMdaStatsInstance Unsigned32, tmnxL2tpIsaMdaStatsName DisplayString, tmnxL2tpIsaMdaStatsVal Counter32, tmnxL2tpIsaMdaStatsValHw Counter32, tmnxL2tpIsaMdaStatsValue Counter64 } tmnxL2tpIsaMdaStatsInstance OBJECT-TYPE SYNTAX Unsigned32 (0..70) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatsInstance indicates the instance identifier of the statistics contained in this conceptual row." ::= { tmnxL2tpIsaMdaStatisticsEntry 1 } tmnxL2tpIsaMdaStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatsName indicates the human-readable identifier of the statistics contained in this conceptual row." ::= { tmnxL2tpIsaMdaStatisticsEntry 2 } tmnxL2tpIsaMdaStatsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatsVal indicates the lower 32-bits word of the statistics value contained in this conceptual row." ::= { tmnxL2tpIsaMdaStatisticsEntry 3 } tmnxL2tpIsaMdaStatsValHw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatsValHw indicates the higher 32-bits word of the statistics value contained in this conceptual row." ::= { tmnxL2tpIsaMdaStatisticsEntry 4 } tmnxL2tpIsaMdaStatsValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatsValue indicates the value of the statistics contained in this conceptual row." ::= { tmnxL2tpIsaMdaStatisticsEntry 5 } tmnxL2tpEsaObjs OBJECT IDENTIFIER ::= { tmnxL2tpLnsIsaObjs 5 } tmnxL2tpVappTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpVappEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpVappTable contains objects to configure the L2TP ISA Group Virtual Application." ::= { tmnxL2tpEsaObjs 1 } tmnxL2tpVappEntry OBJECT-TYPE SYNTAX TmnxL2tpVappEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents a L2TP ISA Group Member of a L2TP ISA Group. Entries in this table can be created or deleted via SNMP operations." INDEX { tmnxL2tpIsaGrpId, tmnxL2tpEsaNum, tmnxL2tpEsaVappNum } ::= { tmnxL2tpVappTable 1 } TmnxL2tpVappEntry ::= SEQUENCE { tmnxL2tpEsaNum TmnxEsaNum, tmnxL2tpEsaVappNum TmnxEsaVappNum, tmnxL2tpVappRowStatus RowStatus, tmnxL2tpVappLastMgmtChange TimeStamp, tmnxL2tpVappDrain TruthValue, tmnxL2tpVappStop TmnxActionType } tmnxL2tpEsaNum OBJECT-TYPE SYNTAX TmnxEsaNum (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxL2tpEsaNum indicates the number of the Extended Service Appliance where the member is located." ::= { tmnxL2tpVappEntry 1 } tmnxL2tpEsaVappNum OBJECT-TYPE SYNTAX TmnxEsaVappNum (1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxL2tpEsaVappNum indicates the number of the Virtual Machine within an Extended Service Appliance where the member is located." ::= { tmnxL2tpVappEntry 2 } tmnxL2tpVappRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpVappRowStatus specifies the row status of this row." ::= { tmnxL2tpVappEntry 3 } tmnxL2tpVappLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVappLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpVappEntry 4 } tmnxL2tpVappDrain OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpVappDrain specifies if this Virtual L2TP Application is drained from LNS tunnels." ::= { tmnxL2tpVappEntry 5 } tmnxL2tpVappStop OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "Setting the value of tmnxL2tpVappStop to 'doAction' triggers an attempt to stop all PPP sessions on this L2TP Virtual Application. Reading the value of tmnxL2tpVappStop results in 'not-applicable'." ::= { tmnxL2tpVappEntry 6 } tmnxL2tpVappStatTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpVappStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpVappStatTable contains status and statistics information about the Virtual Machine within an Extended Service Appliance." ::= { tmnxL2tpEsaObjs 2 } tmnxL2tpVappStatEntry OBJECT-TYPE SYNTAX TmnxL2tpVappStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row contains status and basic statistics information about a Virtual Application of a L2TP ISA Group. Entries in this table are created and removed automatically by the system." AUGMENTS { tmnxL2tpVappEntry } ::= { tmnxL2tpVappStatTable 1 } TmnxL2tpVappStatEntry ::= SEQUENCE { tmnxL2tpVappStatOperState TmnxL2tpIsaMdaOperState, tmnxL2tpVappStatSessions Gauge32 } tmnxL2tpVappStatOperState OBJECT-TYPE SYNTAX TmnxL2tpIsaMdaOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVappStatOperState indicates the operational state of this L2TP Virtual Application." ::= { tmnxL2tpVappStatEntry 1 } tmnxL2tpVappStatSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVappStatSessions indicates the actual number of PPP sessions on this L2TP Virtual Application." ::= { tmnxL2tpVappStatEntry 2 } tmnxL2tpVappVRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpVappVRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpVappVRtrTable contains status information about the L2TP Virtual Application with respect to the associated Virtual Routers." ::= { tmnxL2tpEsaObjs 3 } tmnxL2tpVappVRtrEntry OBJECT-TYPE SYNTAX TmnxL2tpVappVRtrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents the association of a L2TP Virtual Application and a Virtual Router. Entries in this table are created and removed automatically by the system." INDEX { tmnxL2tpIsaGrpId, tmnxL2tpEsaNum, tmnxL2tpEsaVappNum, vRtrID } ::= { tmnxL2tpVappVRtrTable 1 } TmnxL2tpVappVRtrEntry ::= SEQUENCE { tmnxL2tpVappVRtrOperState TmnxOperState } tmnxL2tpVappVRtrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpVappVRtrOperState indicates the operational state of this L2TP Virtual Application with respect to this Virtual Router." ::= { tmnxL2tpVappVRtrEntry 1 } tmnxL2tpVappStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpVappStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpVappStatisticsTable contains statistics information about the Virtual Application of a L2TP ISA Group." ::= { tmnxL2tpEsaObjs 4 } tmnxL2tpVappStatisticsEntry OBJECT-TYPE SYNTAX TmnxL2tpVappStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row contains statistics information about a Virtual Application of a L2TP ISA Group. Entries in this table are created and removed automatically by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table." INDEX { tmnxL2tpIsaGrpId, tmnxL2tpEsaNum, tmnxL2tpEsaVappNum, tmnxL2tpVappStatsInstance } ::= { tmnxL2tpVappStatisticsTable 1 } TmnxL2tpVappStatisticsEntry ::= SEQUENCE { tmnxL2tpVappStatsInstance Unsigned32, tmnxL2tpVappStatsName DisplayString, tmnxL2tpVappStatsVal Counter32, tmnxL2tpVappStatsValHw Counter32, tmnxL2tpVappStatsValue Counter64 } tmnxL2tpVappStatsInstance OBJECT-TYPE SYNTAX Unsigned32 (0..70) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpVappStatsInstance indicates the instance identifier of the statistics contained in this conceptual row." ::= { tmnxL2tpVappStatisticsEntry 1 } tmnxL2tpVappStatsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVappStatsName indicates the human-readable identifier of the statistics contained in this conceptual row." ::= { tmnxL2tpVappStatisticsEntry 2 } tmnxL2tpVappStatsVal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVappStatsVal indicates the lower 32-bits word of the statistics value contained in this conceptual row." ::= { tmnxL2tpVappStatisticsEntry 3 } tmnxL2tpVappStatsValHw OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVappStatsValHw indicates the higher 32-bits word of the statistics value contained in this conceptual row." ::= { tmnxL2tpVappStatisticsEntry 4 } tmnxL2tpVappStatsValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVappStatsValue indicates the value of the statistics contained in this conceptual row." ::= { tmnxL2tpVappStatisticsEntry 5 } tmnxL2tpLnsSvcObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 7 } tmnxL2tpLnsIfObjs OBJECT IDENTIFIER ::= { tmnxL2tpLnsSvcObjs 1 } tmnxL2tpLnsIfTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLnsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is supported for backwards compatibility; the recommended way to configure L2TP LNS Group-Interfaces is by means of the TIMETRA-SERV-MIB::svcIfSapCfgTable. The tmnxL2tpLnsIfTable contains objects to configure L2TP LNS Group-Interfaces. Entries in this table are created and destroyed by the system. The system automatically creates an entry in this table for each entry in the TIMETRA-SERV-MIB::iesIfTable where the value of iesIfType is equal to 'group' and the value of iesIfGroupInterfaceType is equal to 'lns'. Deletion of such a row in the iesIfTable results in the same fate for the corresponding row in this table." ::= { tmnxL2tpLnsIfObjs 1 } tmnxL2tpLnsIfEntry OBJECT-TYPE SYNTAX TmnxL2tpLnsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "L2TP LNS specific information about a specific group interface. Unlike regular subscriber traffic, that enters the system through Service Access Points (SAP) on a group-interface, traffic for PPP subscriber sessions terminated by the LNS function, enters the system through a plain layer 3 interface; this traffic is relayed for processing to a L2TP ISA; it re-enters through an internal LNS group interface; this entry allows to configure subscriber management parameters for PPP subscriber sessions." INDEX { svcId, iesIfIndex } ::= { tmnxL2tpLnsIfTable 1 } TmnxL2tpLnsIfEntry ::= SEQUENCE { tmnxL2tpLnsIfLastMgmtChange TimeStamp, tmnxL2tpLnsIfDescription TItemDescription, tmnxL2tpLnsIfDefSubProfile TNamedItemOrEmpty, tmnxL2tpLnsIfDefSlaProfile TNamedItemOrEmpty, tmnxL2tpLnsIfDefAppProfile TNamedItemOrEmpty, tmnxL2tpLnsIfSubIdentPolicy TNamedItemOrEmpty, tmnxL2tpLnsIfDefSubIdent TmnxDefSubIdSource, tmnxL2tpLnsIfDefSubIdentString TmnxSubIdentStringOrEmpty, tmnxL2tpLnsIfDefFilterProfile TNamedItemOrEmpty } tmnxL2tpLnsIfLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { tmnxL2tpLnsIfEntry 1 } tmnxL2tpLnsIfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfDescription specifies the description of this L2TP LNS interface." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 2 } tmnxL2tpLnsIfDefSubProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfDefSubProfile specifies the default subscriber profile of the subscribers of this LNS interface." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 3 } tmnxL2tpLnsIfDefSlaProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfDefSlaProfile specifies the default SLA profile of the subscribers of this LNS interface." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 4 } tmnxL2tpLnsIfDefAppProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfDefAppProfile specifies the default application profile of the subscribers of this LNS interface." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 5 } tmnxL2tpLnsIfSubIdentPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfSubIdentPolicy specifies the subscriber identification policy of the subscribers of this LNS interface." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 6 } tmnxL2tpLnsIfDefSubIdent OBJECT-TYPE SYNTAX TmnxDefSubIdSource MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfDefSubIdent specifies the default subscriber identification of the subscribers of this LNS interface. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this object is set to 'useAutoId', the auto-generated subscriber identification string, as defined in tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber identification string. In this case, tmnxL2tpLnsIfDefSubIdentString must contain the empty string, so any non-empty string in tmnxL2tpLnsIfDefSubIdentString will be set to an empty string. If the value of this object is set to 'useString', the value of tmnxL2tpLnsIfDefSubIdentString will be used as the default subscriber identification string; in this case, an empty tmnxL2tpLnsIfDefSubIdentString means that there is no default subscriber identification configured." DEFVAL { useString } ::= { tmnxL2tpLnsIfEntry 7 } tmnxL2tpLnsIfDefSubIdentString OBJECT-TYPE SYNTAX TmnxSubIdentStringOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpLnsIfDefSubIdentString specifies the default subscriber identification string applicable on the subscribers of this LNS interface." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 8 } tmnxL2tpLnsIfDefFilterProfile OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsIfDefFilterProfile specifies the default filter profile for this LNS interface. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable." DEFVAL { "" } ::= { tmnxL2tpLnsIfEntry 9 } tmnxL2tpMlpppObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 8 } tmnxL2tpLacMlpppBundleTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLacMlpppBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpLacMlpppBundleTable allows monitoring of MLPPP (Multi Link PPP) bundles of PPP sessions where this system acts as a LAC." ::= { tmnxL2tpMlpppObjs 1 } tmnxL2tpLacMlpppBundleEntry OBJECT-TYPE SYNTAX TmnxL2tpLacMlpppBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents an MLPPP Bundle associated with PPP sessions for which this system acts as a LAC. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpLacMlpppBundleIndex } ::= { tmnxL2tpLacMlpppBundleTable 1 } TmnxL2tpLacMlpppBundleEntry ::= SEQUENCE { tmnxL2tpLacMlpppBundleIndex Unsigned32, tmnxL2tpLacMlpppBundleSvcId TmnxServId, tmnxL2tpLacMlpppBundleFwdTuId TmnxL2tpTunnelId, tmnxL2tpLacMlpppBundleUserName TmnxPppoeUserNameOrEmpty, tmnxL2tpLacMlpppBundleLocEpClass TmnxMlpppEpClass, tmnxL2tpLacMlpppBundleLocEpAddr OCTET STRING, tmnxL2tpLacMlpppBundleRemEpClass TmnxMlpppEpClass, tmnxL2tpLacMlpppBundleRemEpAddr OCTET STRING } tmnxL2tpLacMlpppBundleIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object tmnxL2tpLacMlpppBundleIndex indicates the local identifier of this MLPPP Bundle." ::= { tmnxL2tpLacMlpppBundleEntry 1 } tmnxL2tpLacMlpppBundleSvcId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleSvcId indicates the service ID of the IES/VPRN service to which this MLPPP bundle belongs." ::= { tmnxL2tpLacMlpppBundleEntry 2 } tmnxL2tpLacMlpppBundleFwdTuId OBJECT-TYPE SYNTAX TmnxL2tpTunnelId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleFwdTuId indicates the LTS (L2TP Tunnel Stitching) tunnel ID if this bundle is associated with PPP sessions that are stitched to another L2TP tunnel. Otherwise, the value of tmnxL2tpLacMlpppBundleFwdTuId is equal to zero." ::= { tmnxL2tpLacMlpppBundleEntry 3 } tmnxL2tpLacMlpppBundleUserName OBJECT-TYPE SYNTAX TmnxPppoeUserNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleUserName indicates the user name of the subscriber associated with this MLPPP bundle, or another string used to identify that subscriber." ::= { tmnxL2tpLacMlpppBundleEntry 4 } tmnxL2tpLacMlpppBundleLocEpClass OBJECT-TYPE SYNTAX TmnxMlpppEpClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleLocEpClass indicates the address class of the local endpoint. If the value of tmnxL2tpLacMlpppBundleLocEpClass is equal to 'null', the address class of the MLPPP Endpoint Discriminator option was not present in a received Configure-Request." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." ::= { tmnxL2tpLacMlpppBundleEntry 5 } tmnxL2tpLacMlpppBundleLocEpAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleLocEpAddr indicates the address of the local MLPPP Endpoint. Its interpretation depends on the value of tmnxL2tpLacMlpppBundleLocEpClass." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." ::= { tmnxL2tpLacMlpppBundleEntry 6 } tmnxL2tpLacMlpppBundleRemEpClass OBJECT-TYPE SYNTAX TmnxMlpppEpClass MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleRemEpClass indicates the address class of the local endpoint. If the value of tmnxL2tpLacMlpppBundleRemEpClass is equal to 'null', the address class of the MLPPP Endpoint Discriminator option was not present in a received Configure-Request." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." ::= { tmnxL2tpLacMlpppBundleEntry 7 } tmnxL2tpLacMlpppBundleRemEpAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppBundleRemEpAddr indicates the address of the local MLPPP Endpoint. Its interpretation depends on the value of tmnxL2tpLacMlpppBundleRemEpClass." REFERENCE "RFC 1990 The PPP Multilink Protocol (MP), section 5.1.3 Endpoint Discriminator Option." ::= { tmnxL2tpLacMlpppBundleEntry 8 } tmnxL2tpLacMlpppLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpLacMlpppLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpLacMlpppLinkTable contains the subscriber MLPPP (Multi Link PPP) links where this system acts as a LAC, ordered per bundle." REFERENCE "RFC 1990 The PPP Multilink Protocol" ::= { tmnxL2tpMlpppObjs 2 } tmnxL2tpLacMlpppLinkEntry OBJECT-TYPE SYNTAX TmnxL2tpLacMlpppLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row represents an MLPPP Link associated with a PPP session for which this system acts as a LAC. Entries in this table are created and destroyed by the system." INDEX { vRtrID, tmnxL2tpLacMlpppBundleIndex, tmnxL2tpSeStatusId } ::= { tmnxL2tpLacMlpppLinkTable 1 } TmnxL2tpLacMlpppLinkEntry ::= SEQUENCE { tmnxL2tpLacMlpppLinkState TmnxL2tpSeOperState } tmnxL2tpLacMlpppLinkState OBJECT-TYPE SYNTAX TmnxL2tpSeOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpLacMlpppLinkState indicates the operational state of the session associated with this MLPPP link." ::= { tmnxL2tpLacMlpppLinkEntry 1 } tmnxL2tpSysCfgObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 9 } tmnxL2tpSysCfgNonMcTuStart OBJECT-TYPE SYNTAX Unsigned32 (0..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxL2tpSysCfgNonMcTuStart specifies the start of the range of L2TP tunnel identifiers that can be allocated by L2TP on this system, and will not be synchronized with Multi Chassis Redundancy Synchronization (MCS). The values of tmnxL2tpSysCfgNonMcTuStart and tmnxL2tpSysCfgNonMcTuEnd must be either both zero or both non-zero. While both values are equal to zero, the system cannot set up L2TP tunnels without the correct configuration for MCS." DEFVAL { 1 } ::= { tmnxL2tpSysCfgObjs 1 } tmnxL2tpSysCfgNonMcTuEnd OBJECT-TYPE SYNTAX Unsigned32 (0..16383) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxL2tpSysCfgNonMcTuEnd specifies the end of the range of L2TP tunnel identifiers that can be allocated by L2TP on this system, and will not be synchronized with Multi Chassis Redundancy Synchronization (MCS). The values of tmnxL2tpSysCfgNonMcTuStart and tmnxL2tpSysCfgNonMcTuEnd must be either both zero or both non-zero. While both values are equal to zero, the system cannot set up L2TP tunnels without the correct configuration for MCS." DEFVAL { 16383 } ::= { tmnxL2tpSysCfgObjs 2 } tmnxL2tpSysCfgMaxTunnels OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpSysCfgMaxTunnels indicates the maximum number of supported tunnels on this system. This value may depend on the platform, but is typically equal to 16383." ::= { tmnxL2tpSysCfgObjs 3 } tmnxL2tpSysCfgMaxSessions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpSysCfgMaxSessions indicates the maximum number of supported L2TP sessions on this system. This value may depend on the platform, but is typically equal to 250000, the maximum value of the textual convention TmnxL2tpSessionLimit." ::= { tmnxL2tpSysCfgObjs 4 } tmnxL2tpSysCfgMaxTunnelSessions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpSysCfgMaxTunnelSessions indicates the maximum number of sessions per tunnel supported on this system. This value may depend on the platform, but is typically equal to 32767." ::= { tmnxL2tpSysCfgObjs 5 } tmnxL2tpTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpTableLastCh indicates the sysUpTime at the time of the most recent management-initiated change to the tmnxL2tpTable." ::= { tmnxL2tpObjs 10 } tmnxL2tpTgCfgTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTgCfgTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpTgCfgTable." ::= { tmnxL2tpObjs 11 } tmnxL2tpTuCfgTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuCfgTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpTuCfgTable." ::= { tmnxL2tpObjs 12 } tmnxL2tpTuStatusTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuStatusTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpTuStatusTable." ::= { tmnxL2tpObjs 13 } tmnxL2tpSeStatusTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpSeStatusTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpSeStatusTable." ::= { tmnxL2tpObjs 14 } tmnxL2tpIsaGrpTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaGrpTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpIsaGrpTable." ::= { tmnxL2tpObjs 15 } tmnxL2tpIsaMdaTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpIsaMdaTable." ::= { tmnxL2tpObjs 16 } tmnxL2tpIsaMdaStatTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpIsaGrpTable." ::= { tmnxL2tpObjs 17 } tmnxL2tpLnsTgPppTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTgPppTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpLnsTgPppTable." ::= { tmnxL2tpObjs 18 } tmnxL2tpLnsTuPppTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsTuPppTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpLnsTuPppTable." ::= { tmnxL2tpObjs 19 } tmnxL2tpLnsSePppTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpLnsSePppTableLastCh indicates the value of sysUpTime at the time of the last update of an entry in the tmnxL2tpLnsSePppTable." ::= { tmnxL2tpObjs 20 } tmnxL2tpLnsSeAleTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object tmnxL2tpLnsSeAleTableLastCh indicates the value of sysUpTime at the time of the last update of an entry in the tmnxL2tpLnsSeAleTable." ::= { tmnxL2tpObjs 21 } tmnxL2tpXtTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpXtTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpXtTable." ::= { tmnxL2tpObjs 22 } tmnxL2tpIsaMdaStatsTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpIsaMdaStatsTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpIsaMdaStatisticsTable." ::= { tmnxL2tpObjs 23 } tmnxL2tpTgXtTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTgXtTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpTgXtTable." ::= { tmnxL2tpObjs 24 } tmnxL2tpTuXtTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuXtTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpTuXtTable." ::= { tmnxL2tpObjs 25 } tmnxL2tpV3TableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3TableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpV3Table." ::= { tmnxL2tpObjs 26 } tmnxL2tpV3TuStatusTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3TuStatusTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpV3TuStatusTable." ::= { tmnxL2tpObjs 27 } tmnxL2tpV3TgTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3TgTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpV3TgTable." ::= { tmnxL2tpObjs 28 } tmnxL2tpV3EthTunStatTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3EthTunStatTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpV3EthTunStatTable." ::= { tmnxL2tpObjs 29 } tmnxL2tpV3SeStatusTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpV3SeStatusTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpV3SeStatusTable." ::= { tmnxL2tpObjs 30 } tmnxL2tpTuL2tpV3TableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpTuL2tpV3TableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpTuL2tpV3Table." ::= { tmnxL2tpObjs 31 } tmnxL2tpVappTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpVappTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpVappTable." ::= { tmnxL2tpObjs 32 } tmnxL2tpAccountingObjs OBJECT IDENTIFIER ::= { tmnxL2tpObjs 100 } tmnxL2tpApTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpApTable allows configuration of RADIUS based accounting policies for L2TP (Layer Two Tunneling Protocol) tunnel accounting." ::= { tmnxL2tpAccountingObjs 1 } tmnxL2tpApEntry OBJECT-TYPE SYNTAX TmnxL2tpApEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the configuration for a L2TP RADIUS Accounting Policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxL2tpApRowStatus." INDEX { tmnxL2tpApName } ::= { tmnxL2tpApTable 1 } TmnxL2tpApEntry ::= SEQUENCE { tmnxL2tpApName TNamedItem, tmnxL2tpApRowStatus RowStatus, tmnxL2tpApLastMgmtChange TimeStamp, tmnxL2tpApDescription TItemDescription, tmnxL2tpApType BITS, tmnxL2tpApServerVRtrID TmnxVRtrIDOrZero, tmnxL2tpApServerAlgorithm TmnxSubRadServAlgorithm, tmnxL2tpApServerRetry Unsigned32, tmnxL2tpApServerSrcAddrType InetAddressType, tmnxL2tpApServerSrcAddr InetAddress, tmnxL2tpApServerTimeout Unsigned32, tmnxL2tpApIncludeAttributes BITS, tmnxL2tpApRequestScriptPlcy TNamedItemOrEmpty, tmnxL2tpApNasPortIdPfixType TmnxSubNasPortPrefixType, tmnxL2tpApNasPortIdPfixString DisplayString, tmnxL2tpApNasPortIdSfixType TmnxSubNasPortSuffixType, tmnxL2tpApNasPortTypeType TmnxSubNasPortTypeType, tmnxL2tpApNasPortTypeValue Unsigned32, tmnxL2tpApNasPortBitspec TmnxBinarySpecification, tmnxL2tpApRadServPlcy TNamedItemOrEmpty, tmnxL2tpApAcctTunnConn TmnxAsciiSpecification } tmnxL2tpApName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxL2tpApName specifies the name of an L2TP RADIUS Accounting Policy." ::= { tmnxL2tpApEntry 1 } tmnxL2tpApRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApRowStatus controls the creation and deletion of rows in the table. An attempt to delete a row that is referred to will fail with an inconsistentValue error." ::= { tmnxL2tpApEntry 2 } tmnxL2tpApLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy." ::= { tmnxL2tpApEntry 3 } tmnxL2tpApDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApDescription specifies the user provided description of this policy." DEFVAL { "" } ::= { tmnxL2tpApEntry 4 } tmnxL2tpApType OBJECT-TYPE SYNTAX BITS { session (0), tunnel (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApType specifies the type of accounting for the L2TP tunnels associated with this policy." DEFVAL { {session, tunnel} } ::= { tmnxL2tpApEntry 5 } tmnxL2tpApServerVRtrID OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServerVRtrID specifies the virtual router instance applicable for the set of configured RADIUS servers (tmnxL2tpApRadServTable). The value of this object cannot be changed once a RADIUS server is configured for this policy. When the value is '0', both base and management router instances are available." DEFVAL { 0 } ::= { tmnxL2tpApEntry 6 } tmnxL2tpApServerAlgorithm OBJECT-TYPE SYNTAX TmnxSubRadServAlgorithm { direct (1), roundRobin (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServerAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxL2tpApRadServTable)." DEFVAL { direct } ::= { tmnxL2tpApEntry 7 } tmnxL2tpApServerRetry OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServerRetry specifies the number of RADIUS requests towards the same RADIUS server." DEFVAL { 3 } ::= { tmnxL2tpApEntry 8 } tmnxL2tpApServerSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServerSrcAddrType specifies the type of address stored in tmnxL2tpApServerSrcAddr." DEFVAL { unknown } ::= { tmnxL2tpApEntry 9 } tmnxL2tpApServerSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServerSrcAddr specifies the source address of a RADIUS packet for L2TP accounting; it must be a valid unicast address (otherwise a wrongValue error is returned). If this object is configured with the address of a router interface (ref TIMETRA-VRTR-MIB::vRiaIpAddress) the RADIUS client uses it while making a request to the server. If the address is not configured or is not the address of one of the interfaces, the source address is based on the address of the RADIUS server; if the server address is in-band, the client uses the system IP address; if it is out-of-band, the source address is the address of the management interface (the addresses can be found in TIMETRA-VRTR-MIB::vRiaIpAddress)." DEFVAL { ''H } ::= { tmnxL2tpApEntry 10 } tmnxL2tpApServerTimeout OBJECT-TYPE SYNTAX Unsigned32 (1..90) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServerTimeout specifies the timeout between retries towards the same RADIUS server." DEFVAL { 5 } ::= { tmnxL2tpApEntry 11 } tmnxL2tpApIncludeAttributes OBJECT-TYPE SYNTAX BITS { nasIdentifier (0), nasPort (1), nasPortId (2), nasPortType (3), callingStationId (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApIncludeAttributes specifies what RADIUS attributes the system should include into RADIUS accounting messages." DEFVAL { {} } ::= { tmnxL2tpApEntry 12 } tmnxL2tpApRequestScriptPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApRequestScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the outgoing Accounting-Request messages." DEFVAL { "" } ::= { tmnxL2tpApEntry 13 } tmnxL2tpApNasPortIdPfixType OBJECT-TYPE SYNTAX TmnxSubNasPortPrefixType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApNasPortIdPfixType specifies what type of prefix will be added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxL2tpApIncludeAttributes." DEFVAL { none } ::= { tmnxL2tpApEntry 14 } tmnxL2tpApNasPortIdPfixString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApNasPortIdPfixString specifies the user configurable string to be added as prefix to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxL2tpApIncludeAttributes and tmnxL2tpApNasPortIdPfixType is set to 'userString'." DEFVAL { "" } ::= { tmnxL2tpApEntry 15 } tmnxL2tpApNasPortIdSfixType OBJECT-TYPE SYNTAX TmnxSubNasPortSuffixType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApNasPortIdSfixType specifies what type of suffix will be added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxL2tpApIncludeAttributes." DEFVAL { none } ::= { tmnxL2tpApEntry 16 } tmnxL2tpApNasPortTypeType OBJECT-TYPE SYNTAX TmnxSubNasPortTypeType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApNasPortTypeType specifies what kind of value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxL2tpApIncludeAttributes." DEFVAL { standard } ::= { tmnxL2tpApEntry 17 } tmnxL2tpApNasPortTypeValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApNasPortTypeValue specifies what value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxL2tpApIncludeAttributes and the value of the object tmnxL2tpApNasPortTypeType is equal to 'config'." DEFVAL { 0 } ::= { tmnxL2tpApEntry 18 } tmnxL2tpApNasPortBitspec OBJECT-TYPE SYNTAX TmnxBinarySpecification MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApNasPortBitspec specifies what number will be put in the RADIUS NAS-Port attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPort' bit is set in tmnxL2tpApIncludeAttributes. ::= 'o' | 'i' | 's' | 'm' | 'p' | 'v' | 'c' 'c' - ATM VCI (Virtual Channel Identifier) 'i' - inner VLAN ID 'm' - ISA MDA number / ESA number 'o' - outer VLAN ID 'p' - port number 's' - ISA slot number / ESA VAPP number 'v' - ATM VPI (Virtual Path Identifier) Maximum 32 bits can be specified. If less than 32 bits are specified, the least significant bits are used and the omitted higher bits are set to zero. Note that 'm' and 's' will contain ISA or ESA numbers, depending on the personality of the L2TP group. Example: *12o*12i*2s01 means 'the 12 least significant bits of the outer VLAN ID, followed by the 12 least significant bits of the inner VLAN ID, followed by the two least significant bits of the ISA slot number or ESA VAPP number, followed by a zero and a one-bit', stored in network order in the least significant bits: 0000ooooooooooooiiiiiiiiiiiiss01." DEFVAL { "" } ::= { tmnxL2tpApEntry 19 } tmnxL2tpApRadServPlcy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApRadServPlcy specifies the RADIUS server policy defined in TIMETRA-RADIUS-MIB::tmnxRadSrvPlcyTable." DEFVAL { "" } ::= { tmnxL2tpApEntry 20 } tmnxL2tpApAcctTunnConn OBJECT-TYPE SYNTAX TmnxAsciiSpecification (SIZE (1..253)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object tmnxL2tpApAcctTunnConn specifies what string is to be sent in the accounting message. ::= 'n' | 's' | 'S' | 't' | 'T' | 'c' | 'C' 'n' - Call Serial Number 's' - Local Session Id 'S' - Remote Session Id 't' - Local Tunnel Id 'T' - Remote Tunnel Id 'c' - Local Connection Id 'C' - Remote Connection Id An empty string is not allowed. Example: '%n %s' means 'Call Serial Number, followed by a blank space, followed by the Local Session Id'." DEFVAL { "%n" } ::= { tmnxL2tpApEntry 21 } tmnxL2tpApServTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpApServEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpApServTable allows the configuration of objects related to a particular RADIUS server associated with a particular L2TP RADIUS Accounting Policy." ::= { tmnxL2tpAccountingObjs 2 } tmnxL2tpApServEntry OBJECT-TYPE SYNTAX TmnxL2tpApServEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents the configuration for a particular RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to tmnxL2tpApServRowStatus." INDEX { tmnxL2tpApName, tmnxL2tpApServIndex } ::= { tmnxL2tpApServTable 1 } TmnxL2tpApServEntry ::= SEQUENCE { tmnxL2tpApServIndex Unsigned32, tmnxL2tpApServRowStatus RowStatus, tmnxL2tpApServLastMgmtChange TimeStamp, tmnxL2tpApServAddrType InetAddressType, tmnxL2tpApServAddr InetAddress, tmnxL2tpApServSecret DisplayString, tmnxL2tpApServAcctPort Unsigned32, tmnxL2tpApServOperState TmnxOperState } tmnxL2tpApServIndex OBJECT-TYPE SYNTAX Unsigned32 (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxL2tpApServIndex specifies the index of this RADIUS server in the set of servers associated with this L2TP accounting policy." ::= { tmnxL2tpApServEntry 1 } tmnxL2tpApServRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServRowStatus controls the creation and deletion of rows in the table." ::= { tmnxL2tpApServEntry 2 } tmnxL2tpApServLastMgmtChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value tmnxL2tpApServLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this conceptual row." ::= { tmnxL2tpApServEntry 3 } tmnxL2tpApServAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServAddrType specifies the type of address stored in tmnxL2tpApServAddr." ::= { tmnxL2tpApServEntry 5 } tmnxL2tpApServAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServAddr specifies the IP address of the RADIUS server. A valid unicast IP address must be specified at row creation time." ::= { tmnxL2tpApServEntry 6 } tmnxL2tpApServSecret OBJECT-TYPE SYNTAX DisplayString (SIZE (0|1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServSecret specifies the secret key associated with the RADIUS server. The value of this object cannot be set to the empty string. A valid value must be specified at row creation time. An SNMP get request on this object always returns an empty string." ::= { tmnxL2tpApServEntry 7 } tmnxL2tpApServAcctPort OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxL2tpApServAcctPort specifies the UDP port number on which to contact the RADIUS server for accounting." DEFVAL { 1813 } ::= { tmnxL2tpApServEntry 8 } tmnxL2tpApServOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServOperState indicates the operational state of the RADIUS server." ::= { tmnxL2tpApServEntry 9 } tmnxL2tpApServStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxL2tpApServStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxL2tpApServStatsTable presents statistics of l2tp-accounting-policies' RADIUS servers." ::= { tmnxL2tpAccountingObjs 3 } tmnxL2tpApServStatsEntry OBJECT-TYPE SYNTAX TmnxL2tpApServStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents statistics about a specific server of a specify L2TP accounting policy. Rows in this table are created automatically by the system." AUGMENTS { tmnxL2tpApServEntry } ::= { tmnxL2tpApServStatsTable 1 } TmnxL2tpApServStatsEntry ::= SEQUENCE { tmnxL2tpApServStatsTxRequests Counter32, tmnxL2tpApServStatsRxResponses Counter32, tmnxL2tpApServStatsReqTimeout Counter32, tmnxL2tpApServStatsReqSendFail Counter32, tmnxL2tpApServStatsReqPending Counter32, tmnxL2tpApServStatsRespInvAuth Counter32, tmnxL2tpApServStatsSendRetries Counter32 } tmnxL2tpApServStatsTxRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsTxRequests indicates the number of RADIUS request packets transmitted for this server." ::= { tmnxL2tpApServStatsEntry 1 } tmnxL2tpApServStatsRxResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsRxResponses indicates the number of RADIUS response packets received from this server." ::= { tmnxL2tpApServStatsEntry 2 } tmnxL2tpApServStatsReqTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsReqTimeout indicates the number of RADIUS requests that have timed out for this server." ::= { tmnxL2tpApServStatsEntry 3 } tmnxL2tpApServStatsReqSendFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsReqSendFail indicates the number of RADIUS request packets that could not be transmitted for this server." ::= { tmnxL2tpApServStatsEntry 4 } tmnxL2tpApServStatsReqPending OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsReqPending indicates the number of RADIUS requests that are currently pending for this server." ::= { tmnxL2tpApServStatsEntry 5 } tmnxL2tpApServStatsRespInvAuth OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsRespInvAuth indicates the number of RADIUS response packets with an invalid Authenticator received from this server." ::= { tmnxL2tpApServStatsEntry 6 } tmnxL2tpApServStatsSendRetries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxL2tpApServStatsSendRetries indicates the number of retries to a different server for a single accounting request for this connection with this RADIUS server." ::= { tmnxL2tpApServStatsEntry 7 } tmnxL2tpApTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpApTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpApTable." ::= { tmnxL2tpAccountingObjs 100 } tmnxL2tpApServTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object tmnxL2tpApServTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the tmnxL2tpApServTable." ::= { tmnxL2tpAccountingObjs 101 } tmnxL2tpNotificationObjs OBJECT IDENTIFIER ::= { tmnxL2tp 2 } tmnxL2tpNotifyDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object tmnxL2tpNotifyDescription is a printable character string." ::= { tmnxL2tpNotificationObjs 1 } tmnxL2tpPppNcpFailureProtocol OBJECT-TYPE SYNTAX TmnxPppNcpProtocol MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxL2tpPppNcpFailureProtocol indicates the failing NCP protocol." ::= { tmnxL2tpNotificationObjs 20 } tmnxL2tpConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 60 } tmnxL2tpCompliances OBJECT IDENTIFIER ::= { tmnxL2tpConformance 1 } tmnxL2tpCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgGroup, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup } ::= { tmnxL2tpCompliances 1 } tmnxL2tpStatCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpStatGroup, tmnxL2tpTgStatGroup, tmnxL2tpTuStatGroup, tmnxL2tpPeerStatGroup, tmnxL2tpSeStatGroup } ::= { tmnxL2tpCompliances 2 } tmnxL2tpOpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for L2TP operations on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpTgOpGroup, tmnxL2tpTuOpGroup, tmnxL2tpPeerOpGroup, tmnxL2tpSeOpGroup } ::= { tmnxL2tpCompliances 3 } tmnxL2tpLnsCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP LNS on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpLnsIsaGroup, tmnxL2tpLnsIsaStatGroup, tmnxL2tpLnsTgGroup, tmnxL2tpLnsTuGroup, tmnxL2tpLnsSeGroup, tmnxL2tpLnsIfGroup } ::= { tmnxL2tpCompliances 4 } tmnxL2tpNotifyCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for L2TP notifications on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpNotifyGroup } ::= { tmnxL2tpCompliances 5 } tmnxL2tpV8v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup } ::= { tmnxL2tpCompliances 6 } tmnxL2tpStatV8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpStatV8v0Group, tmnxL2tpTgStatGroup, tmnxL2tpTuStatGroup, tmnxL2tpPeerStatV8v0Group, tmnxL2tpSeStatGroup } ::= { tmnxL2tpCompliances 7 } tmnxL2tpLnsV9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP LNS on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpLnsIsaGroup, tmnxL2tpLnsIsaStatGroup, tmnxL2tpLnsTgGroup, tmnxL2tpLnsTgV9v0Group, tmnxL2tpLnsTuGroup, tmnxL2tpLnsTuV9v0Group, tmnxL2tpLnsSeV9v0Group, tmnxL2tpLnsIfV9v0Group, tmnxL2tpFilterProfileV9v0Group } ::= { tmnxL2tpCompliances 10 } tmnxL2tpNotifyV9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for L2TP notifications on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpNotifyGroup, tmnxL2tpNotifyV9v0Group } ::= { tmnxL2tpCompliances 11 } tmnxL2tpMlpppCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of MLPPP (Multi Link Point to Point Protocol) for L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpMlpppGroup } ::= { tmnxL2tpCompliances 12 } tmnxL2tpV10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup } ::= { tmnxL2tpCompliances 13 } tmnxL2tpNotifyV10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for L2TP notifications on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpNotifyGroup, tmnxL2tpNotifyV9v0Group, tmnxL2tpNotifyV10v0Group } ::= { tmnxL2tpCompliances 14 } tmnxL2tpLnsV10v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP LNS on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpLnsIsaGroup, tmnxL2tpLnsIsaV10v0Group, tmnxL2tpLnsIsaStatGroup, tmnxL2tpLnsTgGroup, tmnxL2tpLnsTgV9v0Group, tmnxL2tpLnsTuGroup, tmnxL2tpLnsTuV9v0Group, tmnxL2tpLnsSeV9v0Group, tmnxL2tpLnsIfV9v0Group, tmnxL2tpFilterProfileV9v0Group } ::= { tmnxL2tpCompliances 15 } tmnxL2tpV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup, tmnxL2tpV11v0Group } ::= { tmnxL2tpCompliances 16 } tmnxL2tpLnsV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP LNS on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpLnsIsaGroup, tmnxL2tpLnsIsaV10v0Group, tmnxL2tpLnsIsaStatGroup, tmnxL2tpLnsTgGroup, tmnxL2tpLnsTgV9v0Group, tmnxL2tpLnsTgV11v0Group, tmnxL2tpLnsTuGroup, tmnxL2tpLnsTuV9v0Group, tmnxL2tpLnsTuV11v0Group, tmnxL2tpLnsSeV9v0Group, tmnxL2tpLnsIfV9v0Group, tmnxL2tpFilterProfileV9v0Group } ::= { tmnxL2tpCompliances 17 } tmnxL2tpStatV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpStatV11v0Group, tmnxL2tpTgStatGroup, tmnxL2tpTuStatGroup, tmnxL2tpTuStatV11v0Group, tmnxL2tpPeerStatV8v0Group, tmnxL2tpSeStatGroup } ::= { tmnxL2tpCompliances 18 } tmnxL2tpNotifyV11v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for L2TP notifications on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpNotifyGroup, tmnxL2tpNotifyV9v0Group, tmnxL2tpNotifyV10v0Group, tmnxL2tpNotifyV11v0Group } ::= { tmnxL2tpCompliances 19 } tmnxL2tpV12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup, tmnxL2tpAccountingV12v0Group, tmnxL2tpV11v0Group, tmnxL2tpDontFragmentBitLacGroup } ::= { tmnxL2tpCompliances 20 } tmnxL2tpLnsV12v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of L2TP LNS on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpLnsIsaGroup, tmnxL2tpLnsIsaV10v0Group, tmnxL2tpLnsIsaStatGroup, tmnxL2tpLnsIsaStatV12v0Group, tmnxL2tpLnsTgGroup, tmnxL2tpLnsTgV9v0Group, tmnxL2tpLnsTgV11v0Group, tmnxL2tpLnsTuGroup, tmnxL2tpLnsTuV9v0Group, tmnxL2tpLnsTuV11v0Group, tmnxL2tpLnsSeV9v0Group, tmnxL2tpLnsIfV9v0Group, tmnxL2tpFilterProfileV9v0Group } ::= { tmnxL2tpCompliances 21 } tmnxL2tpStatV12v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpStatV11v0Group, tmnxL2tpTgStatGroup, tmnxL2tpTuStatGroup, tmnxL2tpTuStatV11v0Group, tmnxL2tpPeerStatV8v0Group, tmnxL2tpSeStatGroup } ::= { tmnxL2tpCompliances 22 } tmnxL2tpNotifyV12v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for L2TP notifications on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpNotifyGroup, tmnxL2tpNotifyV9v0Group, tmnxL2tpNotifyV10v0Group, tmnxL2tpNotifyV11v0Group } ::= { tmnxL2tpCompliances 23 } tmnxL2tpV13v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup, tmnxL2tpAccountingV12v0Group, tmnxL2tpAccountingV13v0Group, tmnxL2tpV11v0Group, tmnxL2tpDontFragmentBitLacGroup, tmnxL2tpMultiChassisGroup } ::= { tmnxL2tpCompliances 24 } tmnxL2tpV14v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpCfgV14v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTgV14v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup, tmnxL2tpAccountingV12v0Group, tmnxL2tpAccountingV13v0Group, tmnxL2tpV11v0Group, tmnxL2tpV3V14v0Group, tmnxL2tpV3TgV14v0Group, tmnxL2tpDontFragmentBitLacGroup, tmnxL2tpMultiChassisGroup } ::= { tmnxL2tpCompliances 25 } tmnxL2tpStatV14v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpStatV11v0Group, tmnxL2tpTgStatGroup, tmnxL2tpTgStatV14v0Group, tmnxL2tpTuStatGroup, tmnxL2tpTuStatV11v0Group, tmnxL2tpTuStatV14v0Group, tmnxL2tpPeerStatV8v0Group, tmnxL2tpSeStatGroup, tmnxL2tpSeStatV14v0Group, tmnxL2tpV3SeStatV14v0Group } ::= { tmnxL2tpCompliances 26 } tmnxL2tpV15v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpV3TcpMssAdjV15v0Grp, tmnxL2tpVasTunnelV15v0Group } ::= { tmnxL2tpCompliances 27 } tmnxL2tpV16v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpCfgV14v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTgV14v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup, tmnxL2tpAccountingV12v0Group, tmnxL2tpAccountingV13v0Group, tmnxL2tpV11v0Group, tmnxL2tpV3V14v0Group, tmnxL2tpV3TgV14v0Group, tmnxL2tpDontFragmentBitLacGroup, tmnxL2tpMultiChassisGroup, tmnxL2tpV3TcpMssAdjV15v0Grp, tmnxL2tpVasTunnelV15v0Group, tmnxL2tpV16v0Group } ::= { tmnxL2tpCompliances 28 } tmnxL2tpV19v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for monitoring of L2TP on Nokia SROS series systems." MODULE MANDATORY-GROUPS { tmnxL2tpCfgV8v0Group, tmnxL2tpCfgV14v0Group, tmnxL2tpTgCfgGroup, tmnxL2tpTuCfgGroup, tmnxL2tpTgV10v0Group, tmnxL2tpTgV14v0Group, tmnxL2tpTuV10v0Group, tmnxL2tpAccountingGroup, tmnxL2tpAccountingV12v0Group, tmnxL2tpAccountingV13v0Group, tmnxL2tpV11v0Group, tmnxL2tpV3V14v0Group, tmnxL2tpV3TgV14v0Group, tmnxL2tpDontFragmentBitLacGroup, tmnxL2tpMultiChassisGroup, tmnxL2tpV3TcpMssAdjV15v0Grp, tmnxL2tpVasTunnelV15v0Group, tmnxL2tpV16v0Group, tmnxL2tpEsaV19v0Group } ::= { tmnxL2tpCompliances 29 } tmnxL2tpGroups OBJECT IDENTIFIER ::= { tmnxL2tpConformance 2 } tmnxL2tpCfgGroup OBJECT-GROUP OBJECTS { tmnxL2tpTableLastCh, tmnxL2tpLastMgmtChange, tmnxL2tpAdminState, tmnxL2tpSessionLimit, tmnxL2tpReceiveWindowSize } STATUS obsolete DESCRIPTION "The group of objects providing management of L2TP instances on Nokia SROS series systems." ::= { tmnxL2tpGroups 1 } tmnxL2tpTgCfgGroup OBJECT-GROUP OBJECTS { tmnxL2tpTgCfgTableLastCh, tmnxL2tpTgCfgRowStatus, tmnxL2tpTgCfgLastMgmtChange, tmnxL2tpTgCfgDescription, tmnxL2tpTgCfgAdminState, tmnxL2tpTgCfgSecret, tmnxL2tpTgCfgHelloInterval, tmnxL2tpTgCfgIdleTO, tmnxL2tpTgCfgDestructTO, tmnxL2tpTgCfgMaxRetxEstab, tmnxL2tpTgCfgMaxRetxNotEstab, tmnxL2tpTgCfgSessionLimit, tmnxL2tpTgCfgAvpHiding, tmnxL2tpTgCfgSessionAssignMethod, tmnxL2tpTgCfgLocalName, tmnxL2tpTgCfgDoChallenge, tmnxL2tpTgCfgReceiveWindowSize } STATUS current DESCRIPTION "The group of objects providing management of L2TP tunnel groups on Nokia SROS series systems." ::= { tmnxL2tpGroups 2 } tmnxL2tpTuCfgGroup OBJECT-GROUP OBJECTS { tmnxL2tpTuCfgTableLastCh, tmnxL2tpTuCfgRowStatus, tmnxL2tpTuCfgLastMgmtChange, tmnxL2tpTuCfgDescription, tmnxL2tpTuCfgAdminState, tmnxL2tpTuCfgPreference, tmnxL2tpTuCfgPeerAddrType, tmnxL2tpTuCfgPeerAddr, tmnxL2tpTuCfgAddrType, tmnxL2tpTuCfgAddr, tmnxL2tpTuCfgLocalName, tmnxL2tpTuCfgRemoteName, tmnxL2tpTuCfgSecret, tmnxL2tpTuCfgHelloInterval, tmnxL2tpTuCfgIdleTO, tmnxL2tpTuCfgDestructTO, tmnxL2tpTuCfgMaxRetxEstab, tmnxL2tpTuCfgMaxRetxNotEstab, tmnxL2tpTuCfgSessionLimit, tmnxL2tpTuCfgAvpHiding, tmnxL2tpTuCfgAutoEstab, tmnxL2tpTuCfgDoChallenge, tmnxL2tpTuCfgReceiveWindowSize } STATUS current DESCRIPTION "The group of objects providing management of L2TP tunnels on Nokia SROS series systems." ::= { tmnxL2tpGroups 3 } tmnxL2tpStatGroup OBJECT-GROUP OBJECTS { tmnxL2tpStatCleared, tmnxL2tpStatTotalTunnels, tmnxL2tpStatFailedTunnels, tmnxL2tpStatFailedTuAuth, tmnxL2tpStatActiveTunnels, tmnxL2tpStatTotalSessions, tmnxL2tpStatFailedSessions, tmnxL2tpStatActiveSessions } STATUS obsolete DESCRIPTION "The group of objects providing monitoring of L2TP on Nokia SROS series systems." ::= { tmnxL2tpGroups 4 } tmnxL2tpTgStatGroup OBJECT-GROUP OBJECTS { tmnxL2tpTgStatState, tmnxL2tpTgStatCleared, tmnxL2tpTgStatTotalTunnels, tmnxL2tpTgStatFailedTunnels, tmnxL2tpTgStatFailedTuAuth, tmnxL2tpTgStatActiveTunnels, tmnxL2tpTgStatTunnels, tmnxL2tpTgStatTotalSessions, tmnxL2tpTgStatFailedSessions, tmnxL2tpTgStatActiveSessions, tmnxL2tpTgStatSessions, tmnxL2tpTgStatControlRxOctets, tmnxL2tpTgStatControlRxOctetsLw, tmnxL2tpTgStatControlRxOctetsHw, tmnxL2tpTgStatControlRxPkts, tmnxL2tpTgStatControlTxOctets, tmnxL2tpTgStatControlTxOctetsLw, tmnxL2tpTgStatControlTxOctetsHw, tmnxL2tpTgStatControlTxPkts, tmnxL2tpTgStatErrorTxPkts, tmnxL2tpTgStatErrorRxPkts, tmnxL2tpTgStatSessionLimit, tmnxL2tpTgStatSeAssignMethod, tmnxL2tpTgTuId } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP tunnel groups on Nokia SROS series systems." ::= { tmnxL2tpGroups 5 } tmnxL2tpPeerStatGroup OBJECT-GROUP OBJECTS { tmnxL2tpPeerStatRole, tmnxL2tpPeerStatActiveTunnels, tmnxL2tpPeerStatTunnels, tmnxL2tpPeerStatActiveSessions, tmnxL2tpPeerStatSessions, tmnxL2tpPeerStatDraining, tmnxL2tpPeerStatUnreachable, tmnxL2tpPeerStatUnreachableTime, tmnxL2tpPeerStatControlRxOct, tmnxL2tpPeerStatControlRxOctLw, tmnxL2tpPeerStatControlRxOctHw, tmnxL2tpPeerStatControlRxPkts, tmnxL2tpPeerStatControlTxOct, tmnxL2tpPeerStatControlTxOctLw, tmnxL2tpPeerStatControlTxOctHw, tmnxL2tpPeerStatControlTxPkts, tmnxL2tpPeerStatErrorTxPkts, tmnxL2tpPeerStatErrorRxPkts, tmnxL2tpPeerStatMsgAccepted, tmnxL2tpPeerStatMsgDuplicateRx, tmnxL2tpPeerStatMsgOutOfWndwRx, tmnxL2tpPeerStatLastCleared, tmnxL2tpPeerTuId, tmnxL2tpPeerProtStatsName, tmnxL2tpPeerProtStatsVal } STATUS obsolete DESCRIPTION "The group of objects providing monitoring of L2TP peers on Nokia SROS series systems." ::= { tmnxL2tpGroups 7 } tmnxL2tpSeStatGroup OBJECT-GROUP OBJECTS { tmnxL2tpSeStatusTableLastCh, tmnxL2tpSeStatusState, tmnxL2tpSeStatusTunnelId, tmnxL2tpSeStatusTunnelConnId, tmnxL2tpSeStatusSessionId, tmnxL2tpSeStatusRemoteTunnelId, tmnxL2tpSeStatusRemoteSessionId, tmnxL2tpSeStatusRemoteConnId, tmnxL2tpSeStatusStartTime, tmnxL2tpSeStatusEstabTime, tmnxL2tpTuStatusRemoteName, tmnxL2tpSeStatusClosedTime, tmnxL2tpSeStatusCdnResult, tmnxL2tpSeStatusGeneralError, tmnxL2tpSeStatusErrorMessage } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP sessions on Nokia SROS series systems." ::= { tmnxL2tpGroups 8 } tmnxL2tpPeerOpGroup OBJECT-GROUP OBJECTS { tmnxL2tpPeerDrain } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP peers on Nokia SROS series systems." ::= { tmnxL2tpGroups 9 } tmnxL2tpTgOpGroup OBJECT-GROUP OBJECTS { tmnxL2tpTgDrain } STATUS current DESCRIPTION "The group of objects providing operations on L2TP tunnel groups on Nokia SROS series systems." ::= { tmnxL2tpGroups 10 } tmnxL2tpTuOpGroup OBJECT-GROUP OBJECTS { tmnxL2tpTuStart, tmnxL2tpTuStop, tmnxL2tpTuDrain } STATUS current DESCRIPTION "The group of objects providing operations on L2TP tunnels on Nokia SROS series systems." ::= { tmnxL2tpGroups 11 } tmnxL2tpLnsIsaGroup OBJECT-GROUP OBJECTS { tmnxL2tpIsaGrpTableLastCh, tmnxL2tpIsaGrpRowStatus, tmnxL2tpIsaGrpLastMgmtChange, tmnxL2tpIsaGrpDescription, tmnxL2tpIsaGrpAdminState, tmnxL2tpIsaGrpOperState, tmnxL2tpIsaMdaTableLastCh, tmnxL2tpIsaMdaRowStatus, tmnxL2tpIsaMdaLastMgmtChange, tmnxL2tpIsaMdaDrain, tmnxL2tpIsaMdaStop } STATUS current DESCRIPTION "The group of objects providing configuration of L2TP Integrated Service Adaptors (ISA) on Nokia SROS series systems." ::= { tmnxL2tpGroups 12 } tmnxL2tpLnsIsaStatGroup OBJECT-GROUP OBJECTS { tmnxL2tpIsaMdaStatTableLastCh, tmnxL2tpIsaMdaStatOperState, tmnxL2tpIsaMdaStatSessions, tmnxL2tpIsaMdaVRtrOperState } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP Integrated Service Adaptors (ISA) on Nokia SROS series systems." ::= { tmnxL2tpGroups 13 } tmnxL2tpLnsTgGroup OBJECT-GROUP OBJECTS { tmnxL2tpTuCfgDoChallenge, tmnxL2tpTgCfgIsaGrpId, tmnxL2tpTgCfgAddrType, tmnxL2tpTgCfgAddr, tmnxL2tpLnsTgPppTableLastCh, tmnxL2tpLnsTgPppLastMgmtChange, tmnxL2tpLnsTgPppAuthPlcy, tmnxL2tpLnsTgPppAuthProtocol, tmnxL2tpLnsTgPppUserDb, tmnxL2tpLnsTgPppDefaultService, tmnxL2tpLnsTgPppDefaultGroupIf, tmnxL2tpLnsTgPppProxyLcp, tmnxL2tpLnsTgPppProxyAuth, tmnxL2tpLnsTgPppMtu, tmnxL2tpLnsTgPppLcpKaInterval, tmnxL2tpLnsTgPppLcpKaHoldUp } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnel groups on Nokia SROS series systems." ::= { tmnxL2tpGroups 14 } tmnxL2tpLnsTuGroup OBJECT-GROUP OBJECTS { tmnxL2tpTuCfgIsaGrpId, tmnxL2tpLnsTuPppTableLastCh, tmnxL2tpLnsTuPppLastMgmtChange, tmnxL2tpLnsTuPppAuthPlcy, tmnxL2tpLnsTuPppAuthProtocol, tmnxL2tpLnsTuPppUserDb, tmnxL2tpLnsTuPppDefaultService, tmnxL2tpLnsTuPppDefaultGroupIf, tmnxL2tpLnsTuPppProxyLcp, tmnxL2tpLnsTuPppProxyAuth, tmnxL2tpLnsTuPppMtu, tmnxL2tpLnsTuPppLcpKaInterval, tmnxL2tpLnsTuPppLcpKaHoldUp } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnels on Nokia SROS series systems." ::= { tmnxL2tpGroups 15 } tmnxL2tpLnsSeGroup OBJECT-GROUP OBJECTS { tmnxL2tpLnsSePppTableLastCh, tmnxL2tpLnsSePppUpTime, tmnxL2tpLnsSePppLcpState, tmnxL2tpLnsSePppIpcpState, tmnxL2tpLnsSePppPppMtu, tmnxL2tpLnsSePppPppAuthProtocol, tmnxL2tpLnsSePppPppUserName, tmnxL2tpLnsSePppSubIdent, tmnxL2tpLnsSePppOriginSubIdent, tmnxL2tpLnsSePppSubProfString, tmnxL2tpLnsSePppSlaProfString, tmnxL2tpLnsSePppAncpString, tmnxL2tpLnsSePppInterDestId, tmnxL2tpLnsSePppAppProfString, tmnxL2tpLnsSePppOriginStrings, tmnxL2tpLnsSePppSessionTimeout, tmnxL2tpLnsSePppIpAddrType, tmnxL2tpLnsSePppIpAddr, tmnxL2tpLnsSePppPrimaryDnsType, tmnxL2tpLnsSePppPrimaryDns, tmnxL2tpLnsSePppSecondaryDnsType, tmnxL2tpLnsSePppSecondaryDns, tmnxL2tpLnsSePppPrimaryNbnsType, tmnxL2tpLnsSePppPrimaryNbns, tmnxL2tpLnsSePppSecondNbnsType, tmnxL2tpLnsSePppSecondNbns, tmnxL2tpLnsSePppOriginIpcpInfo, tmnxL2tpLnsSePppCircuitId, tmnxL2tpLnsSePppRemoteId, tmnxL2tpLnsSePppAddressPool, tmnxL2tpLnsSePppType, tmnxL2tpLnsSePppSvcId, tmnxL2tpLnsSePppGrpIf, tmnxL2tpLnsSePppL2tpVrtrId, tmnxL2tpLnsSePppL2tpConnectionId, tmnxL2tpLnsSePppCategoryMapName, tmnxL2tpLnsSePppRadiusClassAttr, tmnxL2tpLnsSePppRadiusUserName, tmnxL2tpLnsSePppIpv6cpState, tmnxL2tpLnsSePppInterfaceId, tmnxL2tpLnsSePppOriginIpv6cpInfo, tmnxL2tpLnsSePppIpv6DnsType, tmnxL2tpLnsSePppIpv6Dns1, tmnxL2tpLnsSePppIpv6Dns2, tmnxL2tpLnsSePppIpv6DelPfxType, tmnxL2tpLnsSePppIpv6DelPfxLen, tmnxL2tpLnsSePppIpv6DelPfx, tmnxL2tpLnsSePppIpv6PrefixType, tmnxL2tpLnsSePppIpv6PrefixLen, tmnxL2tpLnsSePppIpv6Prefix, tmnxL2tpLnsSePppStatRxUnkwnProto, tmnxL2tpLnsSePppStatRxLcpConfRq, tmnxL2tpLnsSePppStatRxLcpConfAk, tmnxL2tpLnsSePppStatRxLcpConfNk, tmnxL2tpLnsSePppStatRxLcpConfRj, tmnxL2tpLnsSePppStatRxLcpTermRq, tmnxL2tpLnsSePppStatRxLcpTermAk, tmnxL2tpLnsSePppStatRxLcpCodeRj, tmnxL2tpLnsSePppStatRxLcpEchoRq, tmnxL2tpLnsSePppStatRxLcpEchoRep, tmnxL2tpLnsSePppStatRxLcpProtRj, tmnxL2tpLnsSePppStatRxLcpDiscRq, tmnxL2tpLnsSePppStatTxLcpConfRq, tmnxL2tpLnsSePppStatTxLcpConfAk, tmnxL2tpLnsSePppStatTxLcpConfNk, tmnxL2tpLnsSePppStatTxLcpConfRj, tmnxL2tpLnsSePppStatTxLcpTermRq, tmnxL2tpLnsSePppStatTxLcpTermAk, tmnxL2tpLnsSePppStatTxLcpCodeRj, tmnxL2tpLnsSePppStatTxLcpEchoRq, tmnxL2tpLnsSePppStatTxLcpEchoRep, tmnxL2tpLnsSePppStatTxLcpProtRj, tmnxL2tpLnsSePppStatTxLcpDiscRq, tmnxL2tpLnsSePppStatRxPapAuthRq, tmnxL2tpLnsSePppStatTxPapAuthAk, tmnxL2tpLnsSePppStatTxPapAuthNk, tmnxL2tpLnsSePppStatRxChapResp, tmnxL2tpLnsSePppStatTxChapChall, tmnxL2tpLnsSePppStatTxChapSucc, tmnxL2tpLnsSePppStatTxChapFail, tmnxL2tpLnsSePppStatRxIpcpConfRq, tmnxL2tpLnsSePppStatRxIpcpConfAk, tmnxL2tpLnsSePppStatRxIpcpConfNk, tmnxL2tpLnsSePppStatRxIpcpConfRj, tmnxL2tpLnsSePppStatRxIpcpTermRq, tmnxL2tpLnsSePppStatRxIpcpTermAk, tmnxL2tpLnsSePppStatRxIpcpCodeRj, tmnxL2tpLnsSePppStatTxIpcpConfRq, tmnxL2tpLnsSePppStatTxIpcpConfAk, tmnxL2tpLnsSePppStatTxIpcpConfNk, tmnxL2tpLnsSePppStatTxIpcpConfRj, tmnxL2tpLnsSePppStatTxIpcpTermRq, tmnxL2tpLnsSePppStatTxIpcpTermAk, tmnxL2tpLnsSePppStatTxIpcpCodeRj, tmnxL2tpLnsSeMRtStatus, tmnxL2tpLnsSeOvrPIR, tmnxL2tpLnsSeOvrCIR, tmnxL2tpLnsSeOvrCBS, tmnxL2tpLnsSeOvrMBS, tmnxL2tpLnsSeAleTableLastCh, tmnxL2tpLnsSeAleDatalink, tmnxL2tpLnsSeAleEncaps1, tmnxL2tpLnsSeAleEncaps2, tmnxL2tpLnsSePppStatRxIpv6cpCfRq, tmnxL2tpLnsSePppStatRxIpv6cpCfAk, tmnxL2tpLnsSePppStatRxIpv6cpCfNk, tmnxL2tpLnsSePppStatRxIpv6cpCfRj, tmnxL2tpLnsSePppStatRxIpv6cpTmRq, tmnxL2tpLnsSePppStatRxIpv6cpTmAk, tmnxL2tpLnsSePppStatRxIpv6cpCdRj, tmnxL2tpLnsSePppStatTxIpv6cpCfRq, tmnxL2tpLnsSePppStatTxIpv6cpCfAk, tmnxL2tpLnsSePppStatTxIpv6cpCfNk, tmnxL2tpLnsSePppStatTxIpv6cpCfRj, tmnxL2tpLnsSePppStatTxIpv6cpTmRq, tmnxL2tpLnsSePppStatTxIpv6cpTmAk, tmnxL2tpLnsSePppStatTxIpv6cpCdRj } STATUS obsolete DESCRIPTION "The group of objects providing monitoring of L2TP LNS PPP sessions on Nokia SROS series systems." ::= { tmnxL2tpGroups 16 } tmnxL2tpCfgV8v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTableLastCh, tmnxL2tpLastMgmtChange, tmnxL2tpAdminState, tmnxL2tpSessionLimit, tmnxL2tpReceiveWindowSize, tmnxL2tpRowStatus, tmnxL2tpPeerAddrChangePlcy, tmnxL2tpAvpExclude, tmnxL2tpAvpCallingNumberSpec } STATUS current DESCRIPTION "The group of objects providing management of L2TP instances on Nokia SROS series systems release 8.0." ::= { tmnxL2tpGroups 17 } tmnxL2tpTuStatGroup OBJECT-GROUP OBJECTS { tmnxL2tpTuStatusTableLastCh, tmnxL2tpTuStatusState, tmnxL2tpTuStatusTunnelId, tmnxL2tpTuStatusPreference, tmnxL2tpTuStatusPeerAddrType, tmnxL2tpTuStatusPeerAddr, tmnxL2tpTuStatusAddrType, tmnxL2tpTuStatusAddr, tmnxL2tpTuStatusLocalName, tmnxL2tpTuStatusRemoteName, tmnxL2tpTuStatusAssignmentId, tmnxL2tpTuStatusHelloInterval, tmnxL2tpTuStatusIdleTO, tmnxL2tpTuStatusDestructTO, tmnxL2tpTuStatusMaxRetxEstab, tmnxL2tpTuStatusMaxRetxNotEstab, tmnxL2tpTuStatusSessionLimit, tmnxL2tpTuStatusAvpHiding, tmnxL2tpTuStatusGroupName, tmnxL2tpTuStatusRemoteTunnelId, tmnxL2tpTuStatusRemoteConnId, tmnxL2tpTuStatusTransportType, tmnxL2tpTuStatusUdpPort, tmnxL2tpTuStatusRemoteUdpPort, tmnxL2tpTuStatusStartTime, tmnxL2tpTuStatusEstabTime, tmnxL2tpTuStatusIdleTime, tmnxL2tpTuStatusClosedTime, tmnxL2tpTuStatusStopCcnResult, tmnxL2tpTuStatusGeneralError, tmnxL2tpTuStatusErrorMessage, tmnxL2tpTuStatusDoChallenge, tmnxL2tpTuStatusRws, tmnxL2tpTuStatusTxDestAddrType, tmnxL2tpTuStatusTxDestAddr, tmnxL2tpTuStatusRxSrcAddrType, tmnxL2tpTuStatusRxSrcAddr, tmnxL2tpTuStatsLastCleared, tmnxL2tpTuStatsTotalSessions, tmnxL2tpTuStatsFailedSessions, tmnxL2tpTuStatsActiveSessions, tmnxL2tpTuStatsSessions, tmnxL2tpTuStatsControlRxOctets, tmnxL2tpTuStatsControlRxOctetsLw, tmnxL2tpTuStatsControlRxOctetsHw, tmnxL2tpTuStatsControlRxPkts, tmnxL2tpTuStatsControlTxOctets, tmnxL2tpTuStatsControlTxOctetsLw, tmnxL2tpTuStatsControlTxOctetsHw, tmnxL2tpTuStatsControlTxPkts, tmnxL2tpTuStatsErrorTxPkts, tmnxL2tpTuStatsErrorRxPkts, tmnxL2tpTuStatsFsmMsgAccepted, tmnxL2tpTuStatsFsmMsgDuplicateRx, tmnxL2tpTuStatsFsmMsgOutOfWndwRx, tmnxL2tpTuStatsQLengthUnsentMax, tmnxL2tpTuStatsQLengthUnsentCur, tmnxL2tpTuStatsQLengthAckMax, tmnxL2tpTuStatsQLengthAckCur, tmnxL2tpTuStatsWindowSizeCur, tmnxL2tpTuProtStatsName, tmnxL2tpTuProtStatsVal } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP tunnels on Nokia SROS series systems." ::= { tmnxL2tpGroups 18 } tmnxL2tpPeerStatV8v0Group OBJECT-GROUP OBJECTS { tmnxL2tpPeerStatActiveTunnels, tmnxL2tpPeerStatTunnels, tmnxL2tpPeerStatActiveSessions, tmnxL2tpPeerStatSessions, tmnxL2tpPeerStatDraining, tmnxL2tpPeerStatUnreachable, tmnxL2tpPeerStatUnreachableTime, tmnxL2tpPeerStatControlRxOct, tmnxL2tpPeerStatControlRxOctLw, tmnxL2tpPeerStatControlRxOctHw, tmnxL2tpPeerStatControlRxPkts, tmnxL2tpPeerStatControlTxOct, tmnxL2tpPeerStatControlTxOctLw, tmnxL2tpPeerStatControlTxOctHw, tmnxL2tpPeerStatControlTxPkts, tmnxL2tpPeerStatErrorTxPkts, tmnxL2tpPeerStatErrorRxPkts, tmnxL2tpPeerStatMsgAccepted, tmnxL2tpPeerStatMsgDuplicateRx, tmnxL2tpPeerStatMsgOutOfWndwRx, tmnxL2tpPeerStatRolesCapability, tmnxL2tpPeerStatRoles, tmnxL2tpPeerStatLastCleared, tmnxL2tpPeerTuId, tmnxL2tpPeerProtStatsName, tmnxL2tpPeerProtStatsVal, tmnxL2tpPeerStatUnreachTimeRem } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP peers on Nokia SROS series systems." ::= { tmnxL2tpGroups 19 } tmnxL2tpLnsIfGroup OBJECT-GROUP OBJECTS { tmnxL2tpLnsIfLastMgmtChange, tmnxL2tpLnsIfDescription, tmnxL2tpLnsIfDefSubProfile, tmnxL2tpLnsIfDefSlaProfile, tmnxL2tpLnsIfDefAppProfile, tmnxL2tpLnsIfSubIdentPolicy, tmnxL2tpLnsIfDefSubIdent, tmnxL2tpLnsIfDefSubIdentString } STATUS obsolete DESCRIPTION "The group of objects providing configuration of L2TP LNS group interfaces on Nokia SROS series systems." ::= { tmnxL2tpGroups 20 } tmnxL2tpStatV8v0Group OBJECT-GROUP OBJECTS { tmnxL2tpStatCleared, tmnxL2tpStatTotalTunnels, tmnxL2tpStatFailedTunnels, tmnxL2tpStatFailedTuAuth, tmnxL2tpStatActiveTunnels, tmnxL2tpStatTotalSessions, tmnxL2tpStatFailedSessions, tmnxL2tpStatActiveSessions, tmnxL2tpStatCurrentTunnels, tmnxL2tpStatCurrentSessions } STATUS obsolete DESCRIPTION "The group of objects providing monitoring of L2TP on Nokia SROS series systems release 8.0." ::= { tmnxL2tpGroups 21 } tmnxL2tpSeOpGroup OBJECT-GROUP OBJECTS { tmnxL2tpSeStop } STATUS current DESCRIPTION "The group of objects providing operations on L2TP sessions on Nokia SROS series systems." ::= { tmnxL2tpGroups 22 } tmnxL2tpStatV11v0Group OBJECT-GROUP OBJECTS { tmnxL2tpStatCleared, tmnxL2tpStatTotalTunnels, tmnxL2tpStatFailedTunnels, tmnxL2tpStatFailedTuAuth, tmnxL2tpStatActiveTunnels, tmnxL2tpStatTotalSessions, tmnxL2tpStatFailedSessions, tmnxL2tpStatActiveSessions, tmnxL2tpStatCurrentTunnels, tmnxL2tpStatCurrentSessions, tmnxL2tpStatCurrSelBlacklstLen, tmnxL2tpStatUnavailTunnelIds } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP on Nokia SROS series systems release 11.0." ::= { tmnxL2tpGroups 23 } tmnxL2tpLnsTgV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsTgPppIpcpSubnetNeg } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnel groups on Nokia SROS series systems that were added in release 9.0." ::= { tmnxL2tpGroups 30 } tmnxL2tpLnsTuV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsTuPppIpcpSubnetNeg } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnels on Nokia SROS series systems that were added in release 9.0." ::= { tmnxL2tpGroups 31 } tmnxL2tpLnsIfV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsIfLastMgmtChange, tmnxL2tpLnsIfDescription, tmnxL2tpLnsIfDefSubProfile, tmnxL2tpLnsIfDefSlaProfile, tmnxL2tpLnsIfDefAppProfile, tmnxL2tpLnsIfSubIdentPolicy, tmnxL2tpLnsIfDefSubIdent, tmnxL2tpLnsIfDefSubIdentString } STATUS current DESCRIPTION "The group of objects providing configuration of L2TP LNS group interfaces on Nokia SROS series systems." ::= { tmnxL2tpGroups 32 } tmnxL2tpMlpppGroup OBJECT-GROUP OBJECTS { tmnxL2tpTgCfgLoadBalanceMethod, tmnxL2tpTuCfgLoadBalanceMethod, tmnxL2tpTgMlpppLastMgmtChange, tmnxL2tpTgMlpppAdminState, tmnxL2tpTgMlpppMaxLinks, tmnxL2tpTgMlpppInterleave, tmnxL2tpTgMlpppMaxFragDelay, tmnxL2tpTgMlpppReassemblyTo, tmnxL2tpTgMlpppShortSeqNumberRx, tmnxL2tpTgMlpppEpClass, tmnxL2tpTgMlpppEpIpv4Address, tmnxL2tpTgMlpppEpMacAddress, tmnxL2tpTuMlpppLastMgmtChange, tmnxL2tpTuMlpppAdminState, tmnxL2tpTuMlpppMaxLinks, tmnxL2tpTuMlpppInterleave, tmnxL2tpTuMlpppMaxFragDelay, tmnxL2tpTuMlpppReassemblyTo, tmnxL2tpTuMlpppShortSeqNumberRx, tmnxL2tpTuMlpppEpClass, tmnxL2tpTuMlpppEpIpv4Address, tmnxL2tpTuMlpppEpMacAddress, tmnxL2tpLacMlpppBundleSvcId, tmnxL2tpLacMlpppBundleFwdTuId, tmnxL2tpLacMlpppBundleUserName, tmnxL2tpLacMlpppBundleLocEpClass, tmnxL2tpLacMlpppBundleLocEpAddr, tmnxL2tpLacMlpppBundleRemEpClass, tmnxL2tpLacMlpppBundleRemEpAddr, tmnxL2tpLacMlpppLinkState, tmnxL2tpSeStatusMlpppBundleIndex } STATUS current DESCRIPTION "The group of objects providing management of MLPPP for L2TP tunnels on Nokia SROS series systems." ::= { tmnxL2tpGroups 40 } tmnxL2tpLnsSeV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsSePppTableLastCh, tmnxL2tpLnsSePppSubPppIndex } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP LNS PPP sessions in release 9.0 of Nokia SROS series systems." ::= { tmnxL2tpGroups 41 } tmnxL2tpFilterProfileV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsIfDefFilterProfile } STATUS current DESCRIPTION "The group of objects providing configuration of Filter Profiles on Nokia SROS series systems." ::= { tmnxL2tpGroups 42 } tmnxL2tpTgV10v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTgCfgLoadBalanceMethod } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnel groups on Nokia SROS series systems that were added in release 10.0." ::= { tmnxL2tpGroups 43 } tmnxL2tpTuV10v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTuCfgLoadBalanceMethod } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnels on Nokia SROS series systems that were added in release 10.0." ::= { tmnxL2tpGroups 44 } tmnxL2tpAccountingGroup OBJECT-GROUP OBJECTS { tmnxL2tpApRowStatus, tmnxL2tpApLastMgmtChange, tmnxL2tpApDescription, tmnxL2tpApType, tmnxL2tpApServerVRtrID, tmnxL2tpApServerAlgorithm, tmnxL2tpApServerRetry, tmnxL2tpApServerSrcAddrType, tmnxL2tpApServerSrcAddr, tmnxL2tpApServerTimeout, tmnxL2tpApServRowStatus, tmnxL2tpApServLastMgmtChange, tmnxL2tpApServAddrType, tmnxL2tpApServAddr, tmnxL2tpApServSecret, tmnxL2tpApServAcctPort, tmnxL2tpApServOperState, tmnxL2tpApServStatsTxRequests, tmnxL2tpApServStatsRxResponses, tmnxL2tpApServStatsReqTimeout, tmnxL2tpApServStatsReqSendFail, tmnxL2tpApServStatsReqPending, tmnxL2tpApServStatsRespInvAuth, tmnxL2tpApServStatsSendRetries, tmnxL2tpApServTableLastCh, tmnxL2tpApTableLastCh, tmnxL2tpAccountingPolicy, tmnxL2tpTgCfgAccountingPolicy, tmnxL2tpTuCfgAccountingPolicy, tmnxL2tpApIncludeAttributes, tmnxL2tpApRequestScriptPlcy, tmnxL2tpApNasPortIdPfixType, tmnxL2tpApNasPortIdPfixString, tmnxL2tpApNasPortIdSfixType, tmnxL2tpApNasPortTypeType, tmnxL2tpApNasPortTypeValue, tmnxL2tpApNasPortBitspec, tmnxL2tpTuStatusAccountingPolicy, tmnxL2tpTuStatusSelBlacklstState, tmnxL2tpTuStatusSelBlacklstTime, tmnxL2tpTuStatSelBlacklstTimeRem } STATUS current DESCRIPTION "The group of objects providing management of RADIUS accounting for L2TP tunnels on Nokia SROS series systems." ::= { tmnxL2tpGroups 45 } tmnxL2tpLnsIsaV10v0Group OBJECT-GROUP OBJECTS { tmnxL2tpIsaGrpPortPlcy } STATUS current DESCRIPTION "The group of objects providing configuration of L2TP Integrated Service Adaptors (ISA) added in release 10.0 of Nokia SROS series systems." ::= { tmnxL2tpGroups 46 } tmnxL2tpV11v0Group OBJECT-GROUP OBJECTS { tmnxL2tpHelloInterval, tmnxL2tpIdleTO, tmnxL2tpDestructTO, tmnxL2tpMaxRetxEstab, tmnxL2tpMaxRetxNotEstab, tmnxL2tpTunnelSessionLimit, tmnxL2tpGroupSessionLimit, tmnxL2tpAvpHiding, tmnxL2tpDoChallenge, tmnxL2tpSecret, tmnxL2tpSessionAssignMethod, tmnxL2tpLocalName, tmnxL2tpAddrType, tmnxL2tpAddr, tmnxL2tpXtTableLastCh, tmnxL2tpXtLastMgmtChange, tmnxL2tpXtNextAttempt, tmnxL2tpXtTuSelBlacklistReason, tmnxL2tpXtTuSelBlacklistMaxTime, tmnxL2tpXtTuSelBlacklistLength, tmnxL2tpXtTuSelBlacklistToAction, tmnxL2tpXtReplaceResultCodes, tmnxL2tpXtAvpCiscoNasPortEth, tmnxL2tpXtAvpCiscoNasPortAtm } STATUS current DESCRIPTION "The group of objects providing configuration of L2TP added in release 11.0 of Nokia SROS series systems." ::= { tmnxL2tpGroups 47 } tmnxL2tpLnsTgV11v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsTgPppLcpIgnoreMagic, tmnxL2tpLnsTgPppMinChapChall, tmnxL2tpLnsTgPppMaxChapChall } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnel groups on Nokia SROS series systems that were added in release 11.0." ::= { tmnxL2tpGroups 48 } tmnxL2tpLnsTuV11v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsTuPppLcpIgnoreMagic, tmnxL2tpLnsTuPppMinChapChall, tmnxL2tpLnsTuPppMaxChapChall } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnels on Nokia SROS series systems that were added in release 11.0." ::= { tmnxL2tpGroups 49 } tmnxL2tpTuStatV11v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTuStatusTxDestUdpPort, tmnxL2tpTuStatusRxSrcUdpPort } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP tunnels on Nokia SROS series systems, added in release 12.0." ::= { tmnxL2tpGroups 50 } tmnxL2tpAccountingV12v0Group OBJECT-GROUP OBJECTS { tmnxL2tpApRadServPlcy } STATUS current DESCRIPTION "The group of objects providing management of RADIUS accounting for L2TP tunnels on Nokia SROS series systems that were added in release 12.0." ::= { tmnxL2tpGroups 55 } tmnxL2tpLnsIsaStatV12v0Group OBJECT-GROUP OBJECTS { tmnxL2tpIsaMdaStatsTableLastCh, tmnxL2tpIsaMdaStatsName, tmnxL2tpIsaMdaStatsVal, tmnxL2tpIsaMdaStatsValHw, tmnxL2tpIsaMdaStatsValue } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP Integrated Service Adaptors (ISA) on Nokia SROS series systems that were added in release 12.0." ::= { tmnxL2tpGroups 56 } tmnxL2tpDontFragmentBitLacGroup OBJECT-GROUP OBJECTS { tmnxL2tpXtDfBitLac, tmnxL2tpTgXtTableLastCh, tmnxL2tpTgXtLastMgmtChange, tmnxL2tpTgXtDfBitLac, tmnxL2tpTuXtTableLastCh, tmnxL2tpTuXtLastMgmtChange, tmnxL2tpTuXtDfBitLac, tmnxL2tpTuStatusDfBitLac } STATUS current DESCRIPTION "The group of objects providing configuration of the DF bit in data traffic transmitted by a system performing the LAC role." ::= { tmnxL2tpGroups 57 } tmnxL2tpMultiChassisGroup OBJECT-GROUP OBJECTS { tmnxL2tpXtFoRecoveryMethod, tmnxL2tpXtFoRecoveryTime, tmnxL2tpXtFoRecoveryMaxSeLifeT, tmnxL2tpTgXtFoRecoveryMethod, tmnxL2tpTgXtFoRecoveryTime, tmnxL2tpTuXtFoRecoveryMethod, tmnxL2tpTuXtFoRecoveryTime, tmnxL2tpTuFoState, tmnxL2tpTuFoConnId, tmnxL2tpTuFoRecoveryState, tmnxL2tpTuFoRecoveredConnId, tmnxL2tpTuFoRecoveryMethod, tmnxL2tpTuFoTrkSrrp, tmnxL2tpTuFoControlMsgBehavior, tmnxL2tpTuFoRecoveryTimeReq, tmnxL2tpTuFoRecoveryTimePeer, tmnxL2tpSysCfgNonMcTuStart, tmnxL2tpSysCfgNonMcTuEnd, tmnxL2tpSysCfgMaxTunnels, tmnxL2tpSysCfgMaxSessions, tmnxL2tpSysCfgMaxTunnelSessions } STATUS current DESCRIPTION "The group of objects providing configuration of LAC redundancy, that is the recovery of stateful information about L2TP tunnels and sessions between this system (performing the LAC role) and its failover peer." ::= { tmnxL2tpGroups 58 } tmnxL2tpAccountingV13v0Group OBJECT-GROUP OBJECTS { tmnxL2tpApAcctTunnConn } STATUS current DESCRIPTION "The group of objects providing management of RADIUS accounting for L2TP tunnels on Nokia SROS series systems that were added in release 13.0." ::= { tmnxL2tpGroups 59 } tmnxL2tpV3V14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpV3TableLastCh, tmnxL2tpV3LastCh, tmnxL2tpV3CookieLen, tmnxL2tpV3DigestType, tmnxL2tpV3NonceLen, tmnxL2tpV3TransportType, tmnxL2tpV3ReconnectTimeout, tmnxL2tpV3Secret } STATUS current DESCRIPTION "The group of objects providing configuration of L2TP V3 tunnels on Nokia SROS series systems that were added in release 14.0." ::= { tmnxL2tpGroups 60 } tmnxL2tpTgV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTgCfgProtocol, tmnxL2tpLnsTgPppLcpForceAckAccm, tmnxL2tpLnsTuPppLcpForceAckAccm } STATUS current DESCRIPTION "The group of objects providing management of L2TP LNS tunnel groups on Nokia SROS series systems that were added in release 14.0." ::= { tmnxL2tpGroups 61 } tmnxL2tpV3TgV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpV3TgTableLastCh, tmnxL2tpV3TgLastCh, tmnxL2tpV3TgCookieLen, tmnxL2tpV3TgDigestType, tmnxL2tpV3TgNonceLen, tmnxL2tpV3TgPwCapList, tmnxL2tpV3TgReconnectTimeout, tmnxL2tpV3TgRemRtrId, tmnxL2tpV3TgTrackPassChng, tmnxL2tpV3TgSecret } STATUS current DESCRIPTION "The group of objects providing management of L2TP V3 LNS tunnel groups on Nokia SROS series systems that were added in release 14.0." ::= { tmnxL2tpGroups 62 } tmnxL2tpSeStatV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpSeStatusPwType } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP sessions on Nokia SROS series systems that were added in release 14.0." ::= { tmnxL2tpGroups 63 } tmnxL2tpV3SeStatV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpV3SeStatusTableLastCh, tmnxL2tpV3SeStatCookieInRx, tmnxL2tpV3SeStatCookieInTx, tmnxL2tpV3SeStatEndPoint, tmnxL2tpV3SeStatEndPointDesc, tmnxL2tpV3SeStatPWType, tmnxL2tpV3SeStatSeqNumInRx, tmnxL2tpV3SeStatSeqNumInTx, tmnxL2tpV3SeStatSubLayerInRx, tmnxL2tpV3SeStatSubLayerInTx, tmnxL2tpV3EthTunStatTableLastCh, tmnxL2tpV3EthTunStatTgName, tmnxL2tpV3EthTunStatVCId, tmnxL2tpV3EthTunStatLocConnId, tmnxL2tpV3EthTunStatDownReason, tmnxL2tpV3EthTunStatReconIvl, tmnxL2tpV3EthTunStatReconTimeRem, tmnxL2tpV3EthTunStatSapEncapVal, tmnxL2tpV3EthTunStatSapPortId, tmnxL2tpV3EthTunStatSapServId, tmnxL2tpV3EthTunStatCtrlConnId, tmnxL2tpV3EthTunStatMatchesCfg, tmnxL2tpV3SeEthTuStatsRxPkts, tmnxL2tpV3SeEthTuStatsRxOctets, tmnxL2tpV3SeEthTuStatsRxErrors, tmnxL2tpV3SeEthTuStatsRxCookErr, tmnxL2tpV3SeEthTuStatsRxSeIdErr, tmnxL2tpV3SeEthTuStatsTxPkts, tmnxL2tpV3SeEthTuStatsTxOctets, tmnxL2tpV3SeEthTuStatsTxErrors } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP V3 sessions on Nokia SROS series systems that were added in release 14.0." ::= { tmnxL2tpGroups 64 } tmnxL2tpCfgV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpAvpIgnore, tmnxL2tpRtmDebounceTime } STATUS current DESCRIPTION "The group of objects providing management of L2TP instances on Nokia SROS series systems release 14.0." ::= { tmnxL2tpGroups 65 } tmnxL2tpTuStatV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTuStatusProtocolVersion, tmnxL2tpTuStatusOperSessionLimit, tmnxL2tpV3TuStatusTableLastCh, tmnxL2tpV3TuStatCookieLen, tmnxL2tpV3TuStatDigestType, tmnxL2tpV3TuStatLocNonce, tmnxL2tpV3TuStatRemNonce, tmnxL2tpV3TuStatRemRtrId, tmnxL2tpV3TuStatPwCapList } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP tunnels on Nokia SROS series systems, added in release 14.0." ::= { tmnxL2tpGroups 66 } tmnxL2tpTgStatV14v0Group OBJECT-GROUP OBJECTS { tmnxL2tpTgStatOperSessionLimit } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP tunnel groups on Nokia SROS series systems, added in release 14.0." ::= { tmnxL2tpGroups 67 } tmnxL2tpV3TcpMssAdjV15v0Grp OBJECT-GROUP OBJECTS { tmnxL2tpV3PubTcpMssAdjust, tmnxL2tpV3PrivTcpMssAdjust, tmnxL2tpV3TgPubTcpMssAdjust, tmnxL2tpV3TgPrivTcpMssAdjust, tmnxL2tpTuL2tpV3LastChange, tmnxL2tpTuL2tpV3PubTcpMssAdjust, tmnxL2tpTuL2tpV3PrivTcpMssAdjust, tmnxL2tpTuL2tpV3TableLastCh, tmnxL2tpV3TuStatPubTcpMss, tmnxL2tpV3TuStatPrivTcpMss } STATUS current DESCRIPTION "The group of objects supporting configuration of the L2TPv3 TCP MSS adjustment capability on Nokia SROS series systems for release 15.0." ::= { tmnxL2tpGroups 68 } tmnxL2tpVasTunnelV15v0Group OBJECT-GROUP OBJECTS { tmnxL2tpVasTunnelTransportType, tmnxL2tpVasTunnelLocalAddrType, tmnxL2tpVasTunnelLocalAddr, tmnxL2tpVasTunnelLocalUdpPort, tmnxL2tpVasTunnelRemoteAddrType, tmnxL2tpVasTunnelRemoteAddr, tmnxL2tpVasTunnelRemoteUdpPort, tmnxL2tpVasTunnelBaseVRtrId, tmnxL2tpVasLocalTunnelId, tmnxL2tpVasRemoteConnId, tmnxL2tpVasRemoteTunnelId, tmnxL2tpVasTuSessLocalSessionId, tmnxL2tpVasToSessRemoteConnId, tmnxL2tpVasTuSessRemoteSessionId } STATUS current DESCRIPTION "The group of objects providing monitoring of L2TP VAS tunnels on Nokia SROS series systems, added in release 15.0." ::= { tmnxL2tpGroups 69 } tmnxL2tpV16v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsTgPppDefaultSvcName, tmnxL2tpLnsTuPppDefaultSvcName, tmnxL2tpLnsTgPppRejDisabledNcp, tmnxL2tpLnsTuPppRejDisabledNcp } STATUS current DESCRIPTION "The group of objects providing management of L2TP on Nokia SROS series systems that were added in release 16.0." ::= { tmnxL2tpGroups 70 } tmnxL2tpObsoletedObjsV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpLnsSePppUpTime, tmnxL2tpLnsSePppLcpState, tmnxL2tpLnsSePppIpcpState, tmnxL2tpLnsSePppPppMtu, tmnxL2tpLnsSePppPppAuthProtocol, tmnxL2tpLnsSePppPppUserName, tmnxL2tpLnsSePppSubIdent, tmnxL2tpLnsSePppOriginSubIdent, tmnxL2tpLnsSePppSubProfString, tmnxL2tpLnsSePppSlaProfString, tmnxL2tpLnsSePppAncpString, tmnxL2tpLnsSePppInterDestId, tmnxL2tpLnsSePppAppProfString, tmnxL2tpLnsSePppOriginStrings, tmnxL2tpLnsSePppSessionTimeout, tmnxL2tpLnsSePppIpAddrType, tmnxL2tpLnsSePppIpAddr, tmnxL2tpLnsSePppPrimaryDnsType, tmnxL2tpLnsSePppPrimaryDns, tmnxL2tpLnsSePppSecondaryDnsType, tmnxL2tpLnsSePppSecondaryDns, tmnxL2tpLnsSePppPrimaryNbnsType, tmnxL2tpLnsSePppPrimaryNbns, tmnxL2tpLnsSePppSecondNbnsType, tmnxL2tpLnsSePppSecondNbns, tmnxL2tpLnsSePppOriginIpcpInfo, tmnxL2tpLnsSePppCircuitId, tmnxL2tpLnsSePppRemoteId, tmnxL2tpLnsSePppAddressPool, tmnxL2tpLnsSePppType, tmnxL2tpLnsSePppSvcId, tmnxL2tpLnsSePppGrpIf, tmnxL2tpLnsSePppL2tpVrtrId, tmnxL2tpLnsSePppL2tpConnectionId, tmnxL2tpLnsSePppCategoryMapName, tmnxL2tpLnsSePppRadiusClassAttr, tmnxL2tpLnsSePppRadiusUserName, tmnxL2tpLnsSePppIpv6cpState, tmnxL2tpLnsSePppInterfaceId, tmnxL2tpLnsSePppOriginIpv6cpInfo, tmnxL2tpLnsSePppIpv6DnsType, tmnxL2tpLnsSePppIpv6Dns1, tmnxL2tpLnsSePppIpv6Dns2, tmnxL2tpLnsSePppIpv6DelPfxType, tmnxL2tpLnsSePppIpv6DelPfxLen, tmnxL2tpLnsSePppIpv6DelPfx, tmnxL2tpLnsSePppIpv6PrefixType, tmnxL2tpLnsSePppIpv6PrefixLen, tmnxL2tpLnsSePppIpv6Prefix, tmnxL2tpLnsSePppStatRxUnkwnProto, tmnxL2tpLnsSePppStatRxLcpConfRq, tmnxL2tpLnsSePppStatRxLcpConfAk, tmnxL2tpLnsSePppStatRxLcpConfNk, tmnxL2tpLnsSePppStatRxLcpConfRj, tmnxL2tpLnsSePppStatRxLcpTermRq, tmnxL2tpLnsSePppStatRxLcpTermAk, tmnxL2tpLnsSePppStatRxLcpCodeRj, tmnxL2tpLnsSePppStatRxLcpEchoRq, tmnxL2tpLnsSePppStatRxLcpEchoRep, tmnxL2tpLnsSePppStatRxLcpProtRj, tmnxL2tpLnsSePppStatRxLcpDiscRq, tmnxL2tpLnsSePppStatTxLcpConfRq, tmnxL2tpLnsSePppStatTxLcpConfAk, tmnxL2tpLnsSePppStatTxLcpConfNk, tmnxL2tpLnsSePppStatTxLcpConfRj, tmnxL2tpLnsSePppStatTxLcpTermRq, tmnxL2tpLnsSePppStatTxLcpTermAk, tmnxL2tpLnsSePppStatTxLcpCodeRj, tmnxL2tpLnsSePppStatTxLcpEchoRq, tmnxL2tpLnsSePppStatTxLcpEchoRep, tmnxL2tpLnsSePppStatTxLcpProtRj, tmnxL2tpLnsSePppStatTxLcpDiscRq, tmnxL2tpLnsSePppStatRxPapAuthRq, tmnxL2tpLnsSePppStatTxPapAuthAk, tmnxL2tpLnsSePppStatTxPapAuthNk, tmnxL2tpLnsSePppStatRxChapResp, tmnxL2tpLnsSePppStatTxChapChall, tmnxL2tpLnsSePppStatTxChapSucc, tmnxL2tpLnsSePppStatTxChapFail, tmnxL2tpLnsSePppStatRxIpcpConfRq, tmnxL2tpLnsSePppStatRxIpcpConfAk, tmnxL2tpLnsSePppStatRxIpcpConfNk, tmnxL2tpLnsSePppStatRxIpcpConfRj, tmnxL2tpLnsSePppStatRxIpcpTermRq, tmnxL2tpLnsSePppStatRxIpcpTermAk, tmnxL2tpLnsSePppStatRxIpcpCodeRj, tmnxL2tpLnsSePppStatTxIpcpConfRq, tmnxL2tpLnsSePppStatTxIpcpConfAk, tmnxL2tpLnsSePppStatTxIpcpConfNk, tmnxL2tpLnsSePppStatTxIpcpConfRj, tmnxL2tpLnsSePppStatTxIpcpTermRq, tmnxL2tpLnsSePppStatTxIpcpTermAk, tmnxL2tpLnsSePppStatTxIpcpCodeRj, tmnxL2tpLnsSePppStatRxIpv6cpCdRj, tmnxL2tpLnsSePppStatRxIpv6cpCfAk, tmnxL2tpLnsSePppStatRxIpv6cpCfNk, tmnxL2tpLnsSePppStatRxIpv6cpCfRj, tmnxL2tpLnsSePppStatRxIpv6cpCfRq, tmnxL2tpLnsSePppStatRxIpv6cpTmAk, tmnxL2tpLnsSePppStatRxIpv6cpTmRq, tmnxL2tpLnsSePppStatTxIpv6cpCdRj, tmnxL2tpLnsSePppStatTxIpv6cpCfAk, tmnxL2tpLnsSePppStatTxIpv6cpCfNk, tmnxL2tpLnsSePppStatTxIpv6cpCfRj, tmnxL2tpLnsSePppStatTxIpv6cpCfRq, tmnxL2tpLnsSePppStatTxIpv6cpTmAk, tmnxL2tpLnsSePppStatTxIpv6cpTmRq, tmnxL2tpLnsSeMRtStatus, tmnxL2tpLnsSeOvrPIR, tmnxL2tpLnsSeOvrCIR, tmnxL2tpLnsSeOvrCBS, tmnxL2tpLnsSeOvrMBS, tmnxL2tpLnsSeAleTableLastCh, tmnxL2tpLnsSeAleDatalink, tmnxL2tpLnsSeAleEncaps1, tmnxL2tpLnsSeAleEncaps2 } STATUS current DESCRIPTION "The group of objects that were obsoleted in release 9.0 of Nokia SROS series systems." ::= { tmnxL2tpGroups 97 } tmnxL2tpObsoletedObjsV8v0Group OBJECT-GROUP OBJECTS { tmnxL2tpPeerStatRole } STATUS current DESCRIPTION "The group of objects that were obsoleted in release 8.0 of Nokia SROS series systems." ::= { tmnxL2tpGroups 98 } tmnxL2tpNotifyObjsGroup OBJECT-GROUP OBJECTS { tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The group of notification objects supporting L2TP notifications on Nokia SROS series systems." ::= { tmnxL2tpGroups 99 } tmnxL2tpNotifyGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxL2tpPeerUnreachable, tmnxL2tpIsaMdaVRtrStateChange, tmnxL2tpLnsSePppSessionFailure, tmnxL2tpVappVRtrStateChange } STATUS current DESCRIPTION "The group of notifications supporting L2TP on Nokia SROS series systems." ::= { tmnxL2tpGroups 100 } tmnxL2tpNotifyV9v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxL2tpLnsPppNcpFailure } STATUS current DESCRIPTION "The group of notifications supporting L2TP on Nokia SROS series systems added in release 9.0." ::= { tmnxL2tpGroups 101 } tmnxL2tpNotifyObjsV9v0Group OBJECT-GROUP OBJECTS { tmnxL2tpPppNcpFailureProtocol } STATUS current DESCRIPTION "The group of notification objects supporting L2TP notifications on Nokia SROS series systems added in release 9.0." ::= { tmnxL2tpGroups 102 } tmnxL2tpNotifyV10v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxL2tpApFailure } STATUS current DESCRIPTION "The group of notifications supporting L2TP on Nokia SROS series systems added in release 10.0." ::= { tmnxL2tpGroups 103 } tmnxL2tpNotifyV11v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxL2tpTunnelBlacklisted, tmnxL2tpTunnelSelBlacklistFull } STATUS current DESCRIPTION "The group of notifications supporting L2TP on Nokia SROS series systems added in release 11.0." ::= { tmnxL2tpGroups 104 } tmnxL2tpEsaV19v0Group OBJECT-GROUP OBJECTS { tmnxL2tpVappTableLastCh, tmnxL2tpVappRowStatus, tmnxL2tpVappLastMgmtChange, tmnxL2tpVappDrain, tmnxL2tpVappStop, tmnxL2tpVappVRtrOperState, tmnxL2tpVappStatOperState, tmnxL2tpVappStatSessions, tmnxL2tpVappStatsName, tmnxL2tpVappStatsVal, tmnxL2tpVappStatsValHw, tmnxL2tpVappStatsValue } STATUS current DESCRIPTION "The group of objects providing configuration of L2TP Integrated Service Adaptors (ISA) on Nokia SROS series systems release 19.0 or higher." ::= { tmnxL2tpGroups 157 } tmnxL2tpNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 60 } tmnxL2tpNotifications OBJECT IDENTIFIER ::= { tmnxL2tpNotifyPrefix 0 } tmnxL2tpPeerUnreachable NOTIFICATION-TYPE OBJECTS { tmnxL2tpPeerStatUnreachable, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpPeerUnreachable notification is sent when a L2TP peer becomes unreachable and when it becomes reachable again." ::= { tmnxL2tpNotifications 1 } tmnxL2tpIsaMdaVRtrStateChange NOTIFICATION-TYPE OBJECTS { tmnxL2tpIsaMdaVRtrOperState, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpIsaMdaVRtrStateChange notification is sent when the operational state of a L2TP ISA MDA with respect to a Virtual Router changes." ::= { tmnxL2tpNotifications 2 } tmnxL2tpLnsSePppSessionFailure NOTIFICATION-TYPE OBJECTS { tmnxL2tpLnsSePppPppUserName, tmnxL2tpLnsSePppSvcId, tmnxL2tpLnsSePppGrpIf, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpLnsSePppSessionFailure notification is sent when the system could not create a new session in the tmnxL2tpLnsSePppTable." ::= { tmnxL2tpNotifications 3 } tmnxL2tpVappVRtrStateChange NOTIFICATION-TYPE OBJECTS { tmnxL2tpVappVRtrOperState, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpVappVRtrStateChange notification is sent when the operational state of a L2TP Virtual Machine within an Extended Service Appliance with respect to a Virtual Router changes." ::= { tmnxL2tpNotifications 4 } tmnxL2tpLnsPppNcpFailure NOTIFICATION-TYPE OBJECTS { tmnxL2tpLnsSePppPppUserName, tmnxL2tpLnsSePppSvcId, tmnxL2tpLnsSePppGrpIf, tmnxL2tpPppNcpFailureProtocol, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpLnsPppNcpFailure notification indicates that there is a NCP phase setup problem." ::= { tmnxL2tpNotifications 10 } tmnxL2tpApFailure NOTIFICATION-TYPE OBJECTS { tmnxL2tpApDescription, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpApFailure notification is generated when a RADIUS accounting request was not sent out successfully to any of the RADIUS servers in the indicated accounting policy." ::= { tmnxL2tpNotifications 11 } tmnxL2tpTunnelBlacklisted NOTIFICATION-TYPE OBJECTS { tmnxL2tpTuStatusSelBlacklstState, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpTunnelBlacklisted notification is sent when a L2TP tunnel is added to or removed from the tunnel-selection-blacklist." ::= { tmnxL2tpNotifications 12 } tmnxL2tpTunnelSelBlacklistFull NOTIFICATION-TYPE OBJECTS { tmnxL2tpStatCurrSelBlacklstLen, tmnxL2tpXtTuSelBlacklistLength, tmnxL2tpNotifyDescription } STATUS current DESCRIPTION "The tmnxL2tpTunnelSelBlacklistFull notification is sent when the number of tunnels and peers in the tunnel-selection-blacklist reaches the limit configured in tmnxL2tpXtTuSelBlacklistLength, or when the limit is no longer reached." ::= { tmnxL2tpNotifications 13 } END