TIMETRA-GSMP-MIB DEFINITIONS ::= BEGIN IMPORTS InetAddress, InetAddressType FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, TimeStamp, TruthValue FROM SNMPv2-TC timetraSRMIBModules, tmnxSRConfs, tmnxSRNotifyPrefix, tmnxSRObjs FROM TIMETRA-GLOBAL-MIB sapEncapValue, sapPortId FROM TIMETRA-SAP-MIB custId, custMultSvcSiteName, svcId FROM TIMETRA-SERV-MIB tmnxSubInfoSubIdent, tmnxSubProfileEntry FROM TIMETRA-SUBSCRIBER-MGMT-MIB TDSCPNameOrEmpty, TEgrRateModType, TItemDescription, TNamedItem, TNamedItemOrEmpty, TPIRAggRateLimitOverride, TPIRRateOverride, TPrecValueOrNone, TRemarkType, TmnxAdminState, TmnxAncpString, TmnxCustId, TmnxEncapVal, TmnxPortID, TmnxServId FROM TIMETRA-TC-MIB ; tmnxGsmpMIBModule MODULE-IDENTITY LAST-UPDATED "201501010000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia SROS Support Web: http://www.nokia.com" DESCRIPTION "This document contains the SNMP MIB module for handling GSMP (General Switch Management Protocol) for the Nokia SROS device. Copyright 2006-2018 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "201501010000Z" DESCRIPTION "Rev 13.0 01 Jan 2015 00:00 13.0 release of the TIMETRA-GSMP-MIB." REVISION "201206010000Z" DESCRIPTION "Rev 11.0 01 Jun 2012 00:00 11.0 release of the TIMETRA-GSMP-MIB." REVISION "200902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-GSMP-MIB." REVISION "200607100000Z" DESCRIPTION "Rev 1.0 10 Jul 2006 00:00 1.0 release of the TIMETRA-GSMP-MIB." ::= { timetraSRMIBModules 39 } tmnxGsmpObjects OBJECT IDENTIFIER ::= { tmnxSRObjs 39 } tmnxGsmpNotifyObjects OBJECT IDENTIFIER ::= { tmnxGsmpObjects 1 } tmnxNotifAncpString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxNotifAncpString indicates the ASCII representation of the DSLAM circuit-id name for which this notification is generated." ::= { tmnxGsmpNotifyObjects 1 } tmnxNotifAncpPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxNotifAncpPolicyName specifies the name of the ANCP policy defined in this row." ::= { tmnxGsmpNotifyObjects 2 } tmnxNotifAncpPlcyActualRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxNotifAncpPlcyActualRate specifies the current rate" ::= { tmnxGsmpNotifyObjects 3 } tmnxAncpRejectReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of tmnxAncpRejectReason indicates the reason why the ANCP session, or ANCP-string is being rejected by the system." ::= { tmnxGsmpNotifyObjects 4 } tmnxGsmpConfigTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxGsmpConfigTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxGsmpConfigTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 2 } tmnxGsmpConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxGsmpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxGsmpConfigTable contains a row for each service defined in the system on which GSMP can be enabled." ::= { tmnxGsmpObjects 3 } tmnxGsmpConfigEntry OBJECT-TYPE SYNTAX TmnxGsmpConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains objects that allow GSMP to be configured in the scope of a service. Rows cannot be created or deleted by the user. A row will be created by the system for each service in the system on which GSMP can be enabled." INDEX { svcId } ::= { tmnxGsmpConfigTable 1 } TmnxGsmpConfigEntry ::= SEQUENCE { tmnxGsmpCfgLastChange TimeStamp, tmnxGsmpCfgAdminState TmnxAdminState } tmnxGsmpCfgLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxGsmpCfgLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpConfigEntry 1 } tmnxGsmpCfgAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxGsmpCfgAdminState specifies the administrative state of the GSMP protocol in this service." DEFVAL { outOfService } ::= { tmnxGsmpConfigEntry 2 } tmnxGsmpGroupConfigTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxGsmpGroupConfigTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxGsmpGroupConfigTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 4 } tmnxGsmpGroupConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxGsmpGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxGsmpGroupConfigTable contains a row for each GSMP group defined in a service on which GSMP can be enabled." ::= { tmnxGsmpObjects 5 } tmnxGsmpGroupConfigEntry OBJECT-TYPE SYNTAX TmnxGsmpGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains objects that allow configuration of GSMP groups in the scope of a service. A GSMP group defines a set of GSMP neighbors which have the same properties. Rows can be created, modified, and deleted by the operator. A row can only be deleted if the tmnxGsmpGrpCfgAdminState of that row is set to disabled(2)." INDEX { svcId, tmnxGsmpGroupName } ::= { tmnxGsmpGroupConfigTable 1 } TmnxGsmpGroupConfigEntry ::= SEQUENCE { tmnxGsmpGroupName TNamedItem, tmnxGsmpGrpCfgLastChange TimeStamp, tmnxGsmpGrpCfgRowStatus RowStatus, tmnxGsmpGrpCfgAdminState TmnxAdminState, tmnxGsmpGrpCfgKeepalive Unsigned32, tmnxGsmpGrpCfgHoldMultiplier Unsigned32, tmnxGsmpGrpCfgDescription TItemDescription, tmnxGsmpGrpCfgAncpOamCap TmnxAdminState, tmnxGsmpGrpCfgAncpDynTopoDiscCap TmnxAdminState, tmnxGsmpGrpCfgPersistencyDb TmnxAdminState, tmnxGsmpGrpCfgIdleFilter TmnxAdminState } tmnxGsmpGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxGsmpGroupName specifies, together with the object svcId, the key for this row. A GSMP group name is unique only within the scope of the service in which it is defined." ::= { tmnxGsmpGroupConfigEntry 1 } tmnxGsmpGrpCfgLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpGroupConfigEntry 2 } tmnxGsmpGrpCfgRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgRowStatus specifies the row status of this row." ::= { tmnxGsmpGroupConfigEntry 3 } tmnxGsmpGrpCfgAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgAdminState specifies the administrative state of the GSMP group. The value noop(3) is never allowed." DEFVAL { outOfService } ::= { tmnxGsmpGroupConfigEntry 4 } tmnxGsmpGrpCfgKeepalive OBJECT-TYPE SYNTAX Unsigned32 (1..25) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgKeepalive specifies the GSMP keepalive timer value." DEFVAL { 10 } ::= { tmnxGsmpGroupConfigEntry 5 } tmnxGsmpGrpCfgHoldMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgHoldMultiplier specifies the GSMP hold multiplier value. The actual hold time becomes: tmnxGsmpGrpCfgHoldMultiplier * tmnxGsmpGrpCfgKeepalive." DEFVAL { 3 } ::= { tmnxGsmpGroupConfigEntry 6 } tmnxGsmpGrpCfgDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgDescription specifies a user provided description string for this GSMP group. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { "" } ::= { tmnxGsmpGroupConfigEntry 7 } tmnxGsmpGrpCfgAncpOamCap OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgAncpOamCap specifies whether or not the GSMP Access Node Control Protocol (ANCP) OAM capability should be negotiated at startup of the GSMP connection. The value noop(3) is never allowed." DEFVAL { outOfService } ::= { tmnxGsmpGroupConfigEntry 8 } tmnxGsmpGrpCfgAncpDynTopoDiscCap OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgAncpDynTopoDiscCap specifies whether or not the GSMP ANCP dynamic topology discovery capability should be negotiated at startup of the GSMP connection. The value noop(3) is never allowed." DEFVAL { inService } ::= { tmnxGsmpGroupConfigEntry 9 } tmnxGsmpGrpCfgPersistencyDb OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgPersistencyDb specifies whether or not the DSL line information is kept when the GSMP connection terminates. The value noop(3) is never allowed." DEFVAL { outOfService } ::= { tmnxGsmpGroupConfigEntry 10 } tmnxGsmpGrpCfgIdleFilter OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpCfgIdleFilter specifies whether or not the DSL line information is ignored when the DSL-Line-State TLV is present in this information and the TLV has as value IDLE. The value noop(3) is never allowed." DEFVAL { outOfService } ::= { tmnxGsmpGroupConfigEntry 11 } tmnxGsmpGroupNbrTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxGsmpGroupNbrTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxGsmpGroupNeighborTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 6 } tmnxGsmpGroupNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxGsmpGroupNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxGsmpGroupConfigTable contains a row for each neighbor defined in the GSMP group defined in a service on which GSMP can be enabled." ::= { tmnxGsmpObjects 7 } tmnxGsmpGroupNeighborEntry OBJECT-TYPE SYNTAX TmnxGsmpGroupNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains objects that allow configuration of a GSMP group neighbor in the scope of a service. Rows can be created, modified, and deleted by the operator. A row can only be deleted if the tmnxGsmpGrpNbrAdminState of that row is set to disabled(2)." INDEX { svcId, tmnxGsmpGroupName, tmnxGsmpGrpNbrAddressType, tmnxGsmpGrpNbrAddress } ::= { tmnxGsmpGroupNeighborTable 1 } TmnxGsmpGroupNeighborEntry ::= SEQUENCE { tmnxGsmpGrpNbrAddressType InetAddressType, tmnxGsmpGrpNbrAddress InetAddress, tmnxGsmpGrpNbrLastChange TimeStamp, tmnxGsmpGrpNbrRowStatus RowStatus, tmnxGsmpGrpNbrAdminState TmnxAdminState, tmnxGsmpGrpNbrLocalAddrType InetAddressType, tmnxGsmpGrpNbrLocalAddr InetAddress, tmnxGsmpGrpNbrDescription TItemDescription, tmnxGsmpGrpNbrPrioMarkType TRemarkType, tmnxGsmpGrpNbrPrioMarkPrec TPrecValueOrNone, tmnxGsmpGrpNbrPrioMarkDscp TDSCPNameOrEmpty } tmnxGsmpGrpNbrAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrAddressType specifies, together with the object tmnxGsmpGrpNbrAddress, the IP address of the neighbor." ::= { tmnxGsmpGroupNeighborEntry 1 } tmnxGsmpGrpNbrAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrAddress specifies, together with the object tmnxGsmpGrpNbrAddressType, the IP address of the neighbor." ::= { tmnxGsmpGroupNeighborEntry 2 } tmnxGsmpGrpNbrLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpGroupNeighborEntry 3 } tmnxGsmpGrpNbrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrRowStatus specifies the row status of this row." ::= { tmnxGsmpGroupNeighborEntry 4 } tmnxGsmpGrpNbrAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrAdminState specifies the administrative state of this neighbor." DEFVAL { outOfService } ::= { tmnxGsmpGroupNeighborEntry 5 } tmnxGsmpGrpNbrLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrLocalAddrType specifies, together with the object tmnxGsmpGrpNbrLocalAddr, the source IP address used in the connection towards the neighbor." DEFVAL { unknown } ::= { tmnxGsmpGroupNeighborEntry 6 } tmnxGsmpGrpNbrLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrLocalAddr specifies, together with the object tmnxGsmpGrpNbrLocalAddrType, the source IP address used in the connection towards the neighbor." DEFVAL { ''H } ::= { tmnxGsmpGroupNeighborEntry 7 } tmnxGsmpGrpNbrDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrDescription specifies a user provided description string for this neighbor. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { "" } ::= { tmnxGsmpGroupNeighborEntry 8 } tmnxGsmpGrpNbrPrioMarkType OBJECT-TYPE SYNTAX TRemarkType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrPrioMarkType specifies the priority remarking type to be used. If 'dscp' is specified the dscp code-point to be used is specified by the object tmnxGsmpGrpNbrPrioMarkDscp. If 'prec' is specified, the precedence value to be used is specified by the object tmnxGsmpGrpNbrPrioMarkPrec. " DEFVAL { none } ::= { tmnxGsmpGroupNeighborEntry 9 } tmnxGsmpGrpNbrPrioMarkPrec OBJECT-TYPE SYNTAX TPrecValueOrNone MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrPrioMarkPrec specifies the precedence priority marking that is to be applied if tmnxGsmpGrpNbrPrioMarkType is set to 'prec'. If the value of tmnxGsmpGrpNbrPrioMarkType is changed from 'prec' to something else, the value of tmnxGsmpGrpNbrPrioMarkPrec is set to its default value." DEFVAL { -1 } ::= { tmnxGsmpGroupNeighborEntry 10 } tmnxGsmpGrpNbrPrioMarkDscp OBJECT-TYPE SYNTAX TDSCPNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxGsmpGrpNbrPrioMarkDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tmnxGsmpGrpNbrPrioMarkType, is specified to be 'dscp'. If the value of tmnxGsmpGrpNbrPrioMarkType is changed from 'dscp' to something else, the value of tmnxGsmpGrpNbrPrioMarkDscp is set to its default value." DEFVAL { "" } ::= { tmnxGsmpGroupNeighborEntry 11 } tmnxAncpStaticMapSapTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStaticMapSapTblLastChg indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpStaticMapSapTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 8 } tmnxAncpStaticMapSapTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpStaticMapSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpStaticMapSapTable contains a row for each static ANCP entry, where the pair (ANCP-string - SAPid) is mapped onto an ANCP policy." ::= { tmnxGsmpObjects 9 } tmnxAncpStaticMapSapEntry OBJECT-TYPE SYNTAX TmnxAncpStaticMapSapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains a static mapping from the pair (ANCP-string - SAPid) onto an ANCP policy. Rows can be created, modified, and deleted by the operator." INDEX { sapPortId, sapEncapValue, tmnxAncpStaticMapSapString } ::= { tmnxAncpStaticMapSapTable 1 } TmnxAncpStaticMapSapEntry ::= SEQUENCE { tmnxAncpStaticMapSapString TmnxAncpString, tmnxAncpStaticMapSapLastChange TimeStamp, tmnxAncpStaticMapSapRowStatus RowStatus, tmnxAncpStaticMapSapAncpPolName TNamedItem } tmnxAncpStaticMapSapString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpStaticMapSapString specifies, together with the SAP-id the key of this row. The value corresponds to the ASCII representation of the DSLAM circuit-id name." ::= { tmnxAncpStaticMapSapEntry 1 } tmnxAncpStaticMapSapLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStaticMapSapLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxAncpStaticMapSapEntry 2 } tmnxAncpStaticMapSapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpStaticMapSapRowStatus specifies the row status of this row." ::= { tmnxAncpStaticMapSapEntry 3 } tmnxAncpStaticMapSapAncpPolName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpStaticMapSapAncpPolName specifies the ANCP policy as defined in the tmnxAncpPolicyTable associated with this (ANCP-string - SAPid) pair." ::= { tmnxAncpStaticMapSapEntry 4 } tmnxAncpStaticMapMssTblLastChg OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStaticMapMssTblLastChg indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpStaticMapMssTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 10 } tmnxAncpStaticMapMssTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpStaticMapMssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpStaticMapMssTable contains a row for each static ANCP entry, where the pair (ANCP-string - cust-id-MSS) is mapped onto an ANCP policy. (MSS = Multi Service Site)." ::= { tmnxGsmpObjects 11 } tmnxAncpStaticMapMssEntry OBJECT-TYPE SYNTAX TmnxAncpStaticMapMssEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains a static mapping from the triplet (ANCP-string - cust-id - MSS) onto an ANCP policy. Rows can be created, modified, and deleted by the operator." INDEX { custId, custMultSvcSiteName, tmnxAncpStaticMapMssString } ::= { tmnxAncpStaticMapMssTable 1 } TmnxAncpStaticMapMssEntry ::= SEQUENCE { tmnxAncpStaticMapMssString TmnxAncpString, tmnxAncpStaticMapMssLastChange TimeStamp, tmnxAncpStaticMapMssRowStatus RowStatus, tmnxAncpStaticMapMssAncpPolName TNamedItem } tmnxAncpStaticMapMssString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpStaticMapMssString specifies, together with the custId and the custMultSvcSiteName, the key of this row. The value corresponds to the ASCII representation of the DSLAM circuit-id name." ::= { tmnxAncpStaticMapMssEntry 1 } tmnxAncpStaticMapMssLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStaticMapMssLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxAncpStaticMapMssEntry 2 } tmnxAncpStaticMapMssRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpStaticMapMssRowStatus specifies the row status of this row." ::= { tmnxAncpStaticMapMssEntry 3 } tmnxAncpStaticMapMssAncpPolName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpStaticMapMssAncpPolName specifies the ANCP policy as defined in the tmnxAncpPolicyTable for this row." ::= { tmnxAncpStaticMapMssEntry 4 } tmnxAncpSubProfileTblLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubProfileTblLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpSubProfileTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 12 } tmnxAncpSubProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSubProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSubProfileTable augments the table TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable. More specifically this table allows the assignment of an ANCP-policy to a subscriber profile." ::= { tmnxGsmpObjects 13 } tmnxAncpSubProfileEntry OBJECT-TYPE SYNTAX TmnxAncpSubProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row allows to assign an ANCP-policy to an existing subscriber profile" AUGMENTS { tmnxSubProfileEntry } ::= { tmnxAncpSubProfileTable 1 } TmnxAncpSubProfileEntry ::= SEQUENCE { tmnxAncpSubProfileAncpPolicy TNamedItemOrEmpty } tmnxAncpSubProfileAncpPolicy OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpSubProfileAncpPolicy specifies the ANCP policy as defined in the tmnxAncpPolicyTable for this sub profile." DEFVAL { "" } ::= { tmnxAncpSubProfileEntry 1 } tmnxAncpPolicyTableLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpPolicyTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tmnxAncpPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxGsmpObjects 14 } tmnxAncpPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpPolicyTable allows configuration of ANCP policies." ::= { tmnxGsmpObjects 15 } tmnxAncpPolicyEntry OBJECT-TYPE SYNTAX TmnxAncpPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains a definition of an ANCP policy. Rows can be created, modified, and deleted by the operator." INDEX { tmnxAncpPolicyName } ::= { tmnxAncpPolicyTable 1 } TmnxAncpPolicyEntry ::= SEQUENCE { tmnxAncpPolicyName TNamedItem, tmnxAncpPlcyLastChange TimeStamp, tmnxAncpPlcyRowStatus RowStatus, tmnxAncpPlcyIngRateAdjustment Unsigned32, tmnxAncpPlcyIngRateReduction Unsigned32, tmnxAncpPlcyIngRateMonitor Unsigned32, tmnxAncpPlcyIngRateMonitorNtf TruthValue, tmnxAncpPlcyIngRateModType INTEGER, tmnxAncpPlcyIngRateModSched TNamedItemOrEmpty, tmnxAncpPlcyEgrRateAdjustment Unsigned32, tmnxAncpPlcyEgrRateReduction Unsigned32, tmnxAncpPlcyEgrRateMonitor Unsigned32, tmnxAncpPlcyEgrRateMonitorNtf TruthValue, tmnxAncpPlcyEgrRateModType TEgrRateModType, tmnxAncpPlcyEgrRateModSched TNamedItemOrEmpty, tmnxAncpPlcyDisableShcv TruthValue, tmnxAncpPlcyDisableShcvHldTime Unsigned32, tmnxAncpPlcyDisableShcvNtf TruthValue } tmnxAncpPolicyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpPolicyName specifies the name of the ANCP policy defined in this row." ::= { tmnxAncpPolicyEntry 1 } tmnxAncpPlcyLastChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpPlcyLastChange indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxAncpPolicyEntry 2 } tmnxAncpPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyRowStatus specifies the row status of this row." ::= { tmnxAncpPolicyEntry 3 } tmnxAncpPlcyIngRateAdjustment OBJECT-TYPE SYNTAX Unsigned32 (1..200) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyIngRateAdjustment specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyIngRateAdjustment/100 - tmnxAncpPlcyIngRateReduction." DEFVAL { 100 } ::= { tmnxAncpPolicyEntry 4 } tmnxAncpPlcyIngRateReduction OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyIngRateReduction specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyIngRateAdjustment/100 - tmnxAncpPlcyIngRateReduction." DEFVAL { 0 } ::= { tmnxAncpPolicyEntry 5 } tmnxAncpPlcyIngRateMonitor OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyIngRateMonitor specifies the rate below which the system will generate an event. If tmnxAncpPlcyIngRateMonitorNtf is true, an SNMP Notification is generated. If set to 0, no rate monitoring is active." DEFVAL { 0 } ::= { tmnxAncpPolicyEntry 6 } tmnxAncpPlcyIngRateMonitorNtf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyIngRateMonitorNtf specifies whether or not an SNMP Notification is generated if a monitor event is raised." DEFVAL { false } ::= { tmnxAncpPolicyEntry 7 } tmnxAncpPlcyIngRateModType OBJECT-TYPE SYNTAX INTEGER { none (1), namedScheduler (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyIngRateModType specifies the ingress-rate modification that is to be applied. If set to 'namedScheduler', then the scheduler as defined in tmnxAncpPlcyIngRateModSched is used." DEFVAL { none } ::= { tmnxAncpPolicyEntry 8 } tmnxAncpPlcyIngRateModSched OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyIngRateModSched specifies the scheduler to be applied for ingress rate modification. The value is only considered if tmnxAncpPlcyIngRateModSched is set to 'namedScheduler'." DEFVAL { "" } ::= { tmnxAncpPolicyEntry 9 } tmnxAncpPlcyEgrRateAdjustment OBJECT-TYPE SYNTAX Unsigned32 (1..200) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyEgrRateAdjustment specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyEgrRateAdjustment/100 - tmnxAncpPlcyEgrRateReduction." DEFVAL { 100 } ::= { tmnxAncpPolicyEntry 10 } tmnxAncpPlcyEgrRateReduction OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyEgrRateReduction specifies the rate adjustment for the scheduler. This object should be used when the rate returned by the the DSLAM is calculated with a different encapsulation than the 7xxx. The node will adjust the rate by the indicated percent as: DSLAM_RATE * tmnxAncpPlcyEgrRateAdjustment/100 - tmnxAncpPlcyEgrRateReduction." DEFVAL { 0 } ::= { tmnxAncpPolicyEntry 11 } tmnxAncpPlcyEgrRateMonitor OBJECT-TYPE SYNTAX Unsigned32 UNITS "kilobps" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyEgrRateMonitor specifies the rate below which the system will generate an event. If tmnxAncpPlcyEgrRateMonitorNtf is true, an SNMP notification is generated. If set to 0, no rate monitoring is active." DEFVAL { 0 } ::= { tmnxAncpPolicyEntry 12 } tmnxAncpPlcyEgrRateMonitorNtf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyEgrRateMonitorNtf specifies whether or not an SNMP Notification is generated if the monitor event is raised." DEFVAL { false } ::= { tmnxAncpPolicyEntry 13 } tmnxAncpPlcyEgrRateModType OBJECT-TYPE SYNTAX TEgrRateModType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyEgrRateModType specifies the egress-rate modification that is to be applied. If set to 'other-namedScheduler', then the scheduler as defined in tmnxAncpPlcyEgrRateModSched is used." DEFVAL { none } ::= { tmnxAncpPolicyEntry 14 } tmnxAncpPlcyEgrRateModSched OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyEgrRateModSched specifies the scheduler to be applied for egress rate modification. The value is only considered if tmnxAncpPlcyEgrRateModType is set to 'namedScheduler'." DEFVAL { "" } ::= { tmnxAncpPolicyEntry 15 } tmnxAncpPlcyDisableShcv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyDisableShcv specifies whether or not the node will suspend SHCV (Subscriber Host Connectivity Verification) for the hosts defined with this ANCP policy when a port-down message is received, until the access node sends a port-up message. If tmnxAncpPlcyDisableShcvHldTime is non zero, the node will suspend SHCV for the period of time defined. If tmnxAncpPlcyDisableShcvHldTime is zero, SHCV is suspended until a port-up message is received." DEFVAL { false } ::= { tmnxAncpPolicyEntry 16 } tmnxAncpPlcyDisableShcvHldTime OBJECT-TYPE SYNTAX Unsigned32 (0..7200) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyDisableShcvHldTime specifies how long SHCV is suspended until the access node sends a port-up message. If tmnxAncpPlcyDisableShcvHldTime is non zero, the node will suspend SHCV for the period of time defined. If tmnxAncpPlcyDisableShcvHldTime is zero, SHCV is suspended until a port-up message is received." DEFVAL { 0 } ::= { tmnxAncpPolicyEntry 17 } tmnxAncpPlcyDisableShcvNtf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of tmnxAncpPlcyDisableShcvNtf specifies whether or not the system should generate a notification before suspending SHCV on the node." DEFVAL { false } ::= { tmnxAncpPolicyEntry 18 } tmnxAncpStringInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpStringInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpStringInfoTable contains runtime information about all ANCP-strings known to the system." ::= { tmnxGsmpObjects 16 } tmnxAncpStringInfoEntry OBJECT-TYPE SYNTAX TmnxAncpStringInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about an ANCP-string known to the system. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { tmnxAncpStrInfAncpString } ::= { tmnxAncpStringInfoTable 1 } TmnxAncpStringInfoEntry ::= SEQUENCE { tmnxAncpStrInfAncpString DisplayString, tmnxAncpStrInfAssociation INTEGER, tmnxAncpStrInfSapPortId TmnxPortID, tmnxAncpStrInfSapEncapValue TmnxEncapVal, tmnxAncpStrInfMultSvcSiteName TNamedItemOrEmpty, tmnxAncpStrInfMultSvcSiteCust TmnxCustId, tmnxAncpStrInfSubscrIdent DisplayString, tmnxAncpStrInfLineState INTEGER, tmnxAncpStrInfAncpPolicyName TNamedItemOrEmpty, tmnxAncpStrInfIngrRate TPIRRateOverride, tmnxAncpStrInfAdjustedIngrRate TPIRRateOverride, tmnxAncpStrInfEgrRate TPIRRateOverride, tmnxAncpStrInfAdjustedEgrRate TPIRRateOverride, tmnxAncpStrInfServId TmnxServId, tmnxAncpStrInfNeighborAddrType InetAddressType, tmnxAncpStrInfNeighborAddr InetAddress, tmnxAncpStrInfTcpPort Unsigned32, tmnxAncpStrInfGroupName TNamedItemOrEmpty, tmnxAncpStrInfPersistKey Unsigned32 } tmnxAncpStrInfAncpString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpStrInfAncpString indicates the ANCP-string for which this row entry contains information." ::= { tmnxAncpStringInfoEntry 1 } tmnxAncpStrInfAssociation OBJECT-TYPE SYNTAX INTEGER { none (1), sap (2), multiServSite (3), subscriberId (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfAssociation indicates to what object the ANCP-string is associated. If set to sap(2), the associated sap can be found in tmnxAncpStrInfSapPortId and tmnxAncpStrInfSapEncapValue. If set to multiServSite (3), the associated multi-service site can be found in (tmnxAncpStrInfMultSvcSiteName tmnxAncpStrInfMultSvcSiteCust). If set to subscriberId (4), the associated subscriber-Id can be found in the object tmnxAncpStrInfSubscrIdent. If set to none (1), no association is currently known for the ANCP string." ::= { tmnxAncpStringInfoEntry 2 } tmnxAncpStrInfSapPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfSapPortId indicates, together with the object tmnxAncpStrInfSapEncapValue the SAP-id to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to sap(2)." ::= { tmnxAncpStringInfoEntry 3 } tmnxAncpStrInfSapEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfSapEncapValue indicates, together with the object tmnxAncpStrInfSapPortId the SAP id to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to sap(2)." ::= { tmnxAncpStringInfoEntry 4 } tmnxAncpStrInfMultSvcSiteName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfMultSvcSiteName indicates, together with the object tmnxAncpStrInfMultSvcSiteCust the MSS site to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to multiServSite(3)." ::= { tmnxAncpStringInfoEntry 5 } tmnxAncpStrInfMultSvcSiteCust OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfMultSvcSiteCust indicates, together with the object tmnxAncpStrInfMultSvcSiteName the MSS site to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to multiServSite(3)." ::= { tmnxAncpStringInfoEntry 6 } tmnxAncpStrInfSubscrIdent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfSubscrIdent indicates, the subscriber ID to which the ANCP-string defined in tmnxAncpStrInfAncpString is associated. The value of this object is only meaningful when the value of the object tmnxAncpStrInfAssociation is set to subscriberId(4)." ::= { tmnxAncpStringInfoEntry 7 } tmnxAncpStrInfLineState OBJECT-TYPE SYNTAX INTEGER { unknown (1), down (2), up (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfLineState indicates the state of the DSL line identified the ANCP-string." ::= { tmnxAncpStringInfoEntry 8 } tmnxAncpStrInfAncpPolicyName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfAncpPolicyName indicates the ANCP-policy name associated with this ANCP-string if any." ::= { tmnxAncpStringInfoEntry 9 } tmnxAncpStrInfIngrRate OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfIngrRate indicates the ingress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3)." ::= { tmnxAncpStringInfoEntry 10 } tmnxAncpStrInfAdjustedIngrRate OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfAdjustedIngrRate indicates the adjusted ingress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3)." ::= { tmnxAncpStringInfoEntry 11 } tmnxAncpStrInfEgrRate OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfEgrRate indicates the egress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3)." ::= { tmnxAncpStringInfoEntry 12 } tmnxAncpStrInfAdjustedEgrRate OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfAdjustedEgrRate indicates the adjusted egress line rate for the DSL line as reported by the access device. The value is meaningful only if the linkstate (tmnxAncpStrInfLineState) is in state up(3)." ::= { tmnxAncpStringInfoEntry 13 } tmnxAncpStrInfServId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfServId indicates (if different from 0) the service in which the ANCP session is running. The 3 objects tmnxAncpStrInfServId,tmnxAncpStrInfNeighborAddr, and tmnxAncpStrInfTcpPort uniquely identify the ANCP session." ::= { tmnxAncpStringInfoEntry 14 } tmnxAncpStrInfNeighborAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfNeighborAddrType indicates the type of address contained in tmnxAncpStrInfNeighborAddr if any." ::= { tmnxAncpStringInfoEntry 15 } tmnxAncpStrInfNeighborAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfNeighborAddr indicates (if different from 0) the ANCP neighbor IP address. The 3 objects tmnxAncpStrInfServId,tmnxAncpStrInfNeighborAddr, and tmnxAncpStrInfTcpPort uniquely identify the ANCP session." ::= { tmnxAncpStringInfoEntry 16 } tmnxAncpStrInfTcpPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfTcpPort indicates (if different from 0) the ANCP neighbor sessions TCP port number. The 3 objects tmnxAncpStrInfServId, tmnxAncpStrInfNeighborAddr, and tmnxAncpStrInfTcpPort uniquely identify the ANCP session." ::= { tmnxAncpStringInfoEntry 17 } tmnxAncpStrInfGroupName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfGroupName indicates the GSMP group in which the neighbor is defined. This value is configurable using the object: tmnxGsmpGroupName." ::= { tmnxAncpStringInfoEntry 18 } tmnxAncpStrInfPersistKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStrInfPersistKey indicates a key value that can be used to track the ANCP-string in the persistence file." ::= { tmnxAncpStringInfoEntry 19 } tmnxAncpSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSessionTable contains runtime information about all ANCP sessions known to the system." ::= { tmnxGsmpObjects 17 } tmnxAncpSessionEntry OBJECT-TYPE SYNTAX TmnxAncpSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains information about an ANCP session known to the system. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { tmnxAncpSesServiceId, tmnxAncpSesNbrAddressType, tmnxAncpSesNbrAddress, tmnxAncpSesNbrTcpPort } ::= { tmnxAncpSessionTable 1 } TmnxAncpSessionEntry ::= SEQUENCE { tmnxAncpSesServiceId TmnxServId, tmnxAncpSesNbrAddressType InetAddressType, tmnxAncpSesNbrAddress InetAddress, tmnxAncpSesNbrTcpPort Unsigned32, tmnxAncpSesNbrPeerInstance Unsigned32, tmnxAncpSesNbrPeerPort Unsigned32, tmnxAncpSesNbrPeerName OCTET STRING, tmnxAncpSesSenderInstance Unsigned32, tmnxAncpSesSenderPort Unsigned32, tmnxAncpSesSenderName OCTET STRING, tmnxAncpSesNbrTimeouts Unsigned32, tmnxAncpSesNbrMaxNbrOfTimeouts Unsigned32, tmnxAncpSesNbrTimer Unsigned32, tmnxAncpSesSenderTimer Unsigned32, tmnxAncpSesNegotiatedCaps BITS, tmnxAncpSesConfiguredCaps BITS, tmnxAncpSesGroupName TNamedItem, tmnxAncpSesState INTEGER, tmnxAncpSesLocalAddrType InetAddressType, tmnxAncpSesLocalAddr InetAddress, tmnxAncpSesVersion INTEGER, tmnxAncpSesPartitionID Integer32 } tmnxAncpSesServiceId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpSesServiceId indicates the service-id of the service in which this ANCP session is running." ::= { tmnxAncpSessionEntry 1 } tmnxAncpSesNbrAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpSesNbrAddressType indicates the address type of the address contained in tmnxAncpSesNbrAddress." ::= { tmnxAncpSessionEntry 2 } tmnxAncpSesNbrAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpSesNbrAddress indicates the IP address of the neighbor in this ANCP session." ::= { tmnxAncpSessionEntry 3 } tmnxAncpSesNbrTcpPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpSesNbrTcpPort indicates the neighbor TCP port number use for this ANCP session." ::= { tmnxAncpSessionEntry 4 } tmnxAncpSesNbrPeerInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNbrPeerInstance indicates the sender-instance value received from the ANCP session neighbor." ::= { tmnxAncpSessionEntry 5 } tmnxAncpSesNbrPeerPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNbrPeerPort indicates the sender-port value received from the ANCP session neighbor." ::= { tmnxAncpSessionEntry 6 } tmnxAncpSesNbrPeerName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNbrPeerName indicates the sender-name value received from the ANCP session neighbor." ::= { tmnxAncpSessionEntry 7 } tmnxAncpSesSenderInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesSenderInstance indicates the sender-instance value sent to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionEntry 8 } tmnxAncpSesSenderPort OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesSenderPort indicates the sender-port value sent to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionEntry 9 } tmnxAncpSesSenderName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesSenderName indicates the sender-name value sent to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionEntry 10 } tmnxAncpSesNbrTimeouts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNbrTimeouts indicates how many times the system has timed out while waiting for an ACK from the neighbor. Each time an answer is received from the neighbor the value is reset to 0." ::= { tmnxAncpSessionEntry 11 } tmnxAncpSesNbrMaxNbrOfTimeouts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNbrMaxNbrOfTimeouts indicates the max number of timeouts the system will allow before the ANCP session is closed. The current number of timeouts is stored in tmnxAncpSesNbrTimeouts. The tmnxAncpSesNbrMaxNbrOfTimeouts is configurable by modifying the object tmnxGsmpGrpCfgHoldMultiplier." ::= { tmnxAncpSessionEntry 12 } tmnxAncpSesNbrTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNbrTimer indicates the timeout value used by the system when waiting for an ACK from the ANCP neighbor. The value of tmnxAncpSesNbrTimer is received from the ANCP neighbor." ::= { tmnxAncpSessionEntry 13 } tmnxAncpSesSenderTimer OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesSenderTimer indicates the timeout value that will be announced towards the ANCP neighbor. The ANCP neighbor will use this timeout value while waiting for a ACK from this system. The tmnxAncpSesNbrTimer is configurable by modifying the object tmnxGsmpGrpCfgKeepalive." ::= { tmnxAncpSessionEntry 14 } tmnxAncpSesNegotiatedCaps OBJECT-TYPE SYNTAX BITS { oamCap (0), dynTopoDiscCap (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesNegotiatedCaps indicates which capabilities are successfully negotiated in the ANCP session." ::= { tmnxAncpSessionEntry 15 } tmnxAncpSesConfiguredCaps OBJECT-TYPE SYNTAX BITS { oamCap (0), dynTopoDiscCap (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesConfiguredCaps indicates which capabilities were requested when the session was first established." ::= { tmnxAncpSessionEntry 16 } tmnxAncpSesGroupName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesGroupName indicates the GSMP group in which the neighbor is defined. This value is configurable using the object: tmnxGsmpGroupName." ::= { tmnxAncpSessionEntry 17 } tmnxAncpSesState OBJECT-TYPE SYNTAX INTEGER { synSent (1), synReceived (2), established (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesState indicates the state this gsmp session is in." ::= { tmnxAncpSessionEntry 18 } tmnxAncpSesLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesLocalAddrType indicates the address type of the address contained in tmnxAncpSesLocalAddr." ::= { tmnxAncpSessionEntry 19 } tmnxAncpSesLocalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesLocalAddr indicates the INET address that was used by the neighbor to identify the endpoint of the ANCP session he wants to establish." ::= { tmnxAncpSessionEntry 20 } tmnxAncpSesVersion OBJECT-TYPE SYNTAX INTEGER { gsmp (1), ancp (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesVersion indicates the ANCP version negotiated for this session." ::= { tmnxAncpSessionEntry 21 } tmnxAncpSesPartitionID OBJECT-TYPE SYNTAX Integer32 (0 | 1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesPartitionID indicates the partition ID negotiated for this session." ::= { tmnxAncpSessionEntry 22 } tmnxAncpSessionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSessionStatsTable contains statistic information for every ANCP session known to the system." ::= { tmnxGsmpObjects 18 } tmnxAncpSessionStatsEntry OBJECT-TYPE SYNTAX TmnxAncpSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about an ANCP session known to the system. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { tmnxAncpSesServiceId, tmnxAncpSesNbrAddressType, tmnxAncpSesNbrAddress, tmnxAncpSesNbrTcpPort } ::= { tmnxAncpSessionStatsTable 1 } TmnxAncpSessionStatsEntry ::= SEQUENCE { tmnxAncpSesStatLastChanged TimeStamp, tmnxAncpSesStatRxDrop Counter32, tmnxAncpSesStatTxDrop Counter32, tmnxAncpSesStatRxSyn Counter32, tmnxAncpSesStatTxSyn Counter32, tmnxAncpSesStatRxSynAck Counter32, tmnxAncpSesStatTxSynAck Counter32, tmnxAncpSesStatRxAck Counter32, tmnxAncpSesStatTxAck Counter32, tmnxAncpSesStatRxRstAck Counter32, tmnxAncpSesStatTxRstAck Counter32, tmnxAncpSesStatRxPortUp Counter32, tmnxAncpSesStatTxPortUp Counter32, tmnxAncpSesStatRxPortDown Counter32, tmnxAncpSesStatTxPortDown Counter32, tmnxAncpSesStatRxLoopback Counter32, tmnxAncpSesStatTxLoopback Counter32 } tmnxAncpSesStatLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatLastChanged indicates the sysUpTime of the last time the counters in this row where reset (to zero). If no counter resets have occurred since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxAncpSessionStatsEntry 1 } tmnxAncpSesStatRxDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxDrop indicates the number of GSMP protocol messages that have been received and then dropped by the system without further processing them." ::= { tmnxAncpSessionStatsEntry 2 } tmnxAncpSesStatTxDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxDrop indicates the number of GSMP protocol messages that were created by the system in order for them to be sent to the ANCP neighbor, but were never transmitted." ::= { tmnxAncpSessionStatsEntry 3 } tmnxAncpSesStatRxSyn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxSyn indicates the number of GSMP SYN messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 4 } tmnxAncpSesStatTxSyn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxSyn indicates the number of GSMP SYN messages that were transmitted to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionStatsEntry 5 } tmnxAncpSesStatRxSynAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxSynAck indicates the number of GSMP SYN ACK messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 6 } tmnxAncpSesStatTxSynAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxSynAck indicates the number of GSMP SYN ACK messages that were transmitted to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionStatsEntry 7 } tmnxAncpSesStatRxAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxAck indicates the number of GSMP ACK messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 8 } tmnxAncpSesStatTxAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxAck indicates the number of GSMP ACK messages that were transmitted to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionStatsEntry 9 } tmnxAncpSesStatRxRstAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxRstAck indicates the number of GSMP RST ACK messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 10 } tmnxAncpSesStatTxRstAck OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxRstAck indicates the number of GSMP RST ACK messages that were transmitted to the ANCP neighbor in this session." ::= { tmnxAncpSessionStatsEntry 11 } tmnxAncpSesStatRxPortUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxPortUp indicates the number of GSMP 'PortUp' messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 12 } tmnxAncpSesStatTxPortUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxPortUp indicates the number of GSMP 'PortUp' messages that were transmitted to the ANCP neighbor in this session." ::= { tmnxAncpSessionStatsEntry 13 } tmnxAncpSesStatRxPortDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxPortDown indicates the number of GSMP 'PortDown' messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 14 } tmnxAncpSesStatTxPortDown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxPortDown indicates the number of GSMP 'PortDown' messages that were transmitted to the ANCP neighbor in this session." ::= { tmnxAncpSessionStatsEntry 15 } tmnxAncpSesStatRxLoopback OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatRxLoopback indicates the number of GSMP Loopback messages received in this ANCP session." ::= { tmnxAncpSessionStatsEntry 16 } tmnxAncpSesStatTxLoopback OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSesStatTxLoopback indicates the number of GSMP Loopback messages that were transmitted to the ANCP neighbor in this ANCP session." ::= { tmnxAncpSessionStatsEntry 17 } tmnxAncpSapMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSapMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSapMonitorTable contains ANCP information for every SAP that maps on an known ANCP string." ::= { tmnxGsmpObjects 19 } tmnxAncpSapMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpSapMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every SAP that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { svcId, sapPortId, sapEncapValue } ::= { tmnxAncpSapMonitorTable 1 } TmnxAncpSapMonitorEntry ::= SEQUENCE { tmnxAncpSapMntrEgrAggRateLimit TPIRAggRateLimitOverride, tmnxAncpSapMntrAncpString TmnxAncpString, tmnxAncpSapMntrEgrAggRateLmt Unsigned32 } tmnxAncpSapMntrEgrAggRateLimit OBJECT-TYPE SYNTAX TPIRAggRateLimitOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpSapMntrEgrAggRateLimit indicates the Qos Scheduler aggregate rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. This object is obsoleted in 13.0 release and replaced by tmnxAncpSapMntrEgrAggRateLmt." ::= { tmnxAncpSapMonitorEntry 1 } tmnxAncpSapMntrAncpString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the aggregate rate limit as described in tmnxAncpSapMntrEgrAggRateLmt." ::= { tmnxAncpSapMonitorEntry 2 } tmnxAncpSapMntrEgrAggRateLmt OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapMntrEgrAggRateLmt indicates the Qos Scheduler aggregate rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. The value of 4294967295 (0xFFFFFFFF) specifies max rate and value of 4294967294 (0xFFFFFFFE) specifies no override." ::= { tmnxAncpSapMonitorEntry 4 } tmnxAncpSapIngSchedMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSapIngSchedMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSapIngSchedMonitorTable contains ANCP ingress information for every SAP that maps on an known ANCP string." ::= { tmnxGsmpObjects 20 } tmnxAncpSapIngSchedMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpSapIngSchedMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every SAP that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { svcId, sapPortId, sapEncapValue, tmnxAncpSapIngMntrQosShedName } ::= { tmnxAncpSapIngSchedMonitorTable 1 } TmnxAncpSapIngSchedMonitorEntry ::= SEQUENCE { tmnxAncpSapIngMntrQosShedName TNamedItem, tmnxAncpSapIngMntrQosShedPIR TPIRRateOverride, tmnxAncpSapIngMntrAncpString TmnxAncpString, tmnxAncpSapIngMntrQosShedPIRHi Unsigned32, tmnxAncpSapIngMntrQosShedPIRLo Unsigned32 } tmnxAncpSapIngMntrQosShedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpSapIngMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this SAP." ::= { tmnxAncpSapIngSchedMonitorEntry 1 } tmnxAncpSapIngMntrQosShedPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpSapIngMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. This object is obsoleted in 11.0 Release. It is replaced by tmnxAncpSapIngMntrQosShedPIRHi and tmnxAncpSapIngMntrQosShedPIRLo." ::= { tmnxAncpSapIngSchedMonitorEntry 2 } tmnxAncpSapIngMntrAncpString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapIngMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpSapIngMntrQosShedPIR." ::= { tmnxAncpSapIngSchedMonitorEntry 3 } tmnxAncpSapIngMntrQosShedPIRHi OBJECT-TYPE SYNTAX Unsigned32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapIngMntrQosShedPIRHi indicates upper 32 bits of the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSapIngMntrQosShedPIRHi along with the value of tmnxAncpSapIngMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSapIngMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSapIngMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSapIngSchedMonitorEntry 4 } tmnxAncpSapIngMntrQosShedPIRLo OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967294 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapIngMntrQosShedPIRLo indicates lower 32 bits of the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSapIngMntrQosShedPIRHi along with the value of tmnxAncpSapIngMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSapIngMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSapIngMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSapIngSchedMonitorEntry 5 } tmnxAncpSapEgrSchedMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSapEgrSchedMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSapEgrSchedMonitorTable contains ANCP ingress information for every SAP that maps on an known ANCP string." ::= { tmnxGsmpObjects 21 } tmnxAncpSapEgrSchedMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpSapEgrSchedMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every SAP that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { svcId, sapPortId, sapEncapValue, tmnxAncpSapEgrMntrQosShedName } ::= { tmnxAncpSapEgrSchedMonitorTable 1 } TmnxAncpSapEgrSchedMonitorEntry ::= SEQUENCE { tmnxAncpSapEgrMntrQosShedName TNamedItem, tmnxAncpSapEgrMntrQosShedPIR TPIRRateOverride, tmnxAncpSapEgrMntrAncpString TmnxAncpString, tmnxAncpSapEgrMntrQosShedPIRHi Unsigned32, tmnxAncpSapEgrMntrQosShedPIRLo Unsigned32 } tmnxAncpSapEgrMntrQosShedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpSapEgrMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this SAP." ::= { tmnxAncpSapEgrSchedMonitorEntry 1 } tmnxAncpSapEgrMntrQosShedPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpSapEgrMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. This object is obsoleted in 11.0 Release. It is replaced by tmnxAncpSapEgrMntrQosShedPIRHi and tmnxAncpSapEgrMntrQosShedPIRLo." ::= { tmnxAncpSapEgrSchedMonitorEntry 2 } tmnxAncpSapEgrMntrAncpString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapEgrMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpSapEgrMntrQosShedPIR." ::= { tmnxAncpSapEgrSchedMonitorEntry 3 } tmnxAncpSapEgrMntrQosShedPIRHi OBJECT-TYPE SYNTAX Unsigned32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapEgrMntrQosShedPIRHi indicates upper 32 bits of the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSapEgrMntrQosShedPIRHi along with the value of tmnxAncpSapEgrMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSapEgrMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSapEgrMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSapEgrSchedMonitorEntry 4 } tmnxAncpSapEgrMntrQosShedPIRLo OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967294 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSapEgrMntrQosShedPIRLo indicates lower 32 bits of the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSapIngMntrQosShedPIRHi along with the value of tmnxAncpSapIngMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSapIngMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSapIngMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSapEgrSchedMonitorEntry 5 } tmnxAncpMssMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpMssMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpMssMonitorTable contains ANCP information for every MSS that maps on an known ANCP string." ::= { tmnxGsmpObjects 22 } tmnxAncpMssMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpMssMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every MSS that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { custId, custMultSvcSiteName } ::= { tmnxAncpMssMonitorTable 1 } TmnxAncpMssMonitorEntry ::= SEQUENCE { tmnxAncpMssMntrEgrAggRateLimit TPIRAggRateLimitOverride, tmnxAncpMssMntrAncpString TmnxAncpString, tmnxAncpMssMntrEgrAggRateLmt Unsigned32 } tmnxAncpMssMntrEgrAggRateLimit OBJECT-TYPE SYNTAX TPIRAggRateLimitOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpMssMntrEgrAggRateLimit indicates the Qos Scheduler rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. This object is obsoleted in 13.0 release and replaced by tmnxAncpMssMntrEgrAggRateLmt." ::= { tmnxAncpMssMonitorEntry 1 } tmnxAncpMssMntrAncpString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the Scheduler rate limit as described in tmnxAncpMssMntrEgrAggRateLmt." ::= { tmnxAncpMssMonitorEntry 2 } tmnxAncpMssMntrEgrAggRateLmt OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssMntrEgrAggRateLmt indicates the Qos Scheduler aggregate rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy. The value of 4294967295 (0xFFFFFFFF) specifies max rate and value of 4294967294 (0xFFFFFFFE) specifies no override." ::= { tmnxAncpMssMonitorEntry 4 } tmnxAncpMssIngMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpMssIngMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpMssIngMonitorTable contains ingress ANCP information for every MSS that maps on an known ANCP string." ::= { tmnxGsmpObjects 23 } tmnxAncpMssIngMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpMssIngMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every MSS that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { custId, custMultSvcSiteName, tmnxAncpMssIngMntrQosShedName } ::= { tmnxAncpMssIngMonitorTable 1 } TmnxAncpMssIngMonitorEntry ::= SEQUENCE { tmnxAncpMssIngMntrQosShedName TNamedItem, tmnxAncpMssIngMntrQosShedPIR TPIRRateOverride, tmnxAncpMssIngMntrAncpString TmnxAncpString, tmnxAncpMssIngMntrQosShedPIRHi Unsigned32, tmnxAncpMssIngMntrQosShedPIRLo Unsigned32 } tmnxAncpMssIngMntrQosShedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpMssIngMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this MSS." ::= { tmnxAncpMssIngMonitorEntry 1 } tmnxAncpMssIngMntrQosShedPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpMssIngMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. This object is obsoleted in 11.0 Release. It is replaced by tmnxAncpMssIngMntrQosShedPIRHi and tmnxAncpMssIngMntrQosShedPIRLo." ::= { tmnxAncpMssIngMonitorEntry 2 } tmnxAncpMssIngMntrAncpString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssIngMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpMssIngMntrQosShedPIR." ::= { tmnxAncpMssIngMonitorEntry 3 } tmnxAncpMssIngMntrQosShedPIRHi OBJECT-TYPE SYNTAX Unsigned32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssIngMntrQosShedPIRHi indicates upper 32 bits of the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpMssIngMntrQosShedPIRHi along with the value of tmnxAncpMssIngMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpMssIngMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpMssIngMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpMssIngMonitorEntry 4 } tmnxAncpMssIngMntrQosShedPIRLo OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967294 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssIngMntrQosShedPIRLo indicates lower 32 bits of the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpMssIngMntrQosShedPIRHi along with the value of tmnxAncpMssIngMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpMssIngMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpMssIngMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpMssIngMonitorEntry 5 } tmnxAncpMssEgrMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpMssEgrMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpMssEgrMonitorTable contains ingress ANCP information for every MSS that maps on an known ANCP string." ::= { tmnxGsmpObjects 24 } tmnxAncpMssEgrMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpMssEgrMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every MSS that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { custId, custMultSvcSiteName, tmnxAncpMssEgrMntrQosShedName } ::= { tmnxAncpMssEgrMonitorTable 1 } TmnxAncpMssEgrMonitorEntry ::= SEQUENCE { tmnxAncpMssEgrMntrQosShedName TNamedItem, tmnxAncpMssEgrMntrQosShedPIR TPIRRateOverride, tmnxAncpMssEgrMntrAncpString TmnxAncpString, tmnxAncpMssEgrMntrQosShedPIRHi Unsigned32, tmnxAncpMssEgrMntrQosShedPIRLo Unsigned32 } tmnxAncpMssEgrMntrQosShedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpMssEgrMntrQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this MSS." ::= { tmnxAncpMssEgrMonitorEntry 1 } tmnxAncpMssEgrMntrQosShedPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpMssEgrMntrQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. This object is obsoleted in 11.0 Release. It is replaced by tmnxAncpMssEgrMntrQosShedPIRHi and tmnxAncpMssEgrMntrQosShedPIRLo." ::= { tmnxAncpMssEgrMonitorEntry 2 } tmnxAncpMssEgrMntrAncpString OBJECT-TYPE SYNTAX TmnxAncpString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssEgrMntrAncpString indicates the ANCP-string received in the GSMP 'PortUp' message which contains the PIR value as described in tmnxAncpMssEgrMntrQosShedPIR." ::= { tmnxAncpMssEgrMonitorEntry 3 } tmnxAncpMssEgrMntrQosShedPIRHi OBJECT-TYPE SYNTAX Unsigned32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssEgrMntrQosShedPIRHi indicates upper 32 bits of the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpMssEgrMntrQosShedPIRHi along with the value of tmnxAncpMssEgrMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpMssEgrMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpMssEgrMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpMssEgrMonitorEntry 4 } tmnxAncpMssEgrMntrQosShedPIRLo OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967294 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpMssEgrMntrQosShedPIRLo indicates lower 32 bits of the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpMssEgrMntrQosShedPIRHi along with the value of tmnxAncpMssEgrMntrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpMssEgrMntrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpMssEgrMntrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpMssEgrMonitorEntry 5 } tmnxAncpSubMonitorTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpSubMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpSubMonitorTable contains ANCP information for every subscriber that maps on an known ANCP string." ::= { tmnxGsmpObjects 25 } tmnxAncpSubMonitorEntry OBJECT-TYPE SYNTAX TmnxAncpSubMonitorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains statistics information about ANCP for every subscriber that maps on an known ANCP string. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { IMPLIED tmnxSubInfoSubIdent } ::= { tmnxAncpSubMonitorTable 1 } TmnxAncpSubMonitorEntry ::= SEQUENCE { tmnxAncpSubMntrIngQosShedName TNamedItem, tmnxAncpSubMntrIngQosShedPIR TPIRRateOverride, tmnxAncpSubMntrEgrQosShedName TNamedItem, tmnxAncpSubMntrEgrQosShedPIR TPIRRateOverride, tmnxAncpSubMntrEgrAggRateLimit TPIRAggRateLimitOverride, tmnxAncpSubMntrIngQosShedPIRHi Unsigned32, tmnxAncpSubMntrIngQosShedPIRLo Unsigned32, tmnxAncpSubMntrEgrQosShedPIRHi Unsigned32, tmnxAncpSubMntrEgrQosShedPIRLo Unsigned32 } tmnxAncpSubMntrIngQosShedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrIngQosShedName indicates the ingress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this subscriber." ::= { tmnxAncpSubMonitorEntry 1 } tmnxAncpSubMntrIngQosShedPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpSubMntrIngQosShedPIR indicates the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. This object is obsoleted in 11.0 Release. It is replaced by tmnxAncpSubMntrIngQosShedPIRHi and tmnxAncpSubMntrIngQosShedPIRLo." ::= { tmnxAncpSubMonitorEntry 2 } tmnxAncpSubMntrEgrQosShedName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrEgrQosShedName indicates the egress Qos Scheduler name (defined in the table TIMETRA-QOS-MIB::tVirtualSchedulerTable applied to this subscriber." ::= { tmnxAncpSubMonitorEntry 3 } tmnxAncpSubMntrEgrQosShedPIR OBJECT-TYPE SYNTAX TPIRRateOverride MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of tmnxAncpSubMntrEgrQosShedPIR indicates the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. This object is obsoleted in 11.0 Release. It is replaced by tmnxAncpSubMntrEgrQosShedPIRHi and tmnxAncpSubMntrEgrQosShedPIRLo." ::= { tmnxAncpSubMonitorEntry 4 } tmnxAncpSubMntrEgrAggRateLimit OBJECT-TYPE SYNTAX TPIRAggRateLimitOverride MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrEgrAggRateLimit indicates the Qos Scheduler rate limit. This value is received via ANCP, potentially modified by the system using the ANCP policy." ::= { tmnxAncpSubMonitorEntry 5 } tmnxAncpSubMntrIngQosShedPIRHi OBJECT-TYPE SYNTAX Unsigned32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrIngQosShedPIRHi indicates upper 32 bits of the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSubMntrIngQosShedPIRHi along with the value of tmnxAncpSubMntrIngQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSubMntrIngQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSubMntrIngQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSubMonitorEntry 6 } tmnxAncpSubMntrIngQosShedPIRLo OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967294 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrIngQosShedPIRLo indicates lower 32 bits of the ingress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSubMntrIngQosShedPIRHi along with the value of tmnxAncpSubMntrIngQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSubMntrIngQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSubMntrIngQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSubMonitorEntry 7 } tmnxAncpSubMntrEgrQosShedPIRHi OBJECT-TYPE SYNTAX Unsigned32 (0 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrEgrQosShedPIRHi indicates upper 32 bits of the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSubMntrEgrQosShedPIRHi along with the value of tmnxAncpSubMntrEgrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSubMntrEgrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSubMntrEgrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSubMonitorEntry 8 } tmnxAncpSubMntrEgrQosShedPIRLo OBJECT-TYPE SYNTAX Unsigned32 (1..3200000000 | 4294967294 | 4294967295) UNITS "kilobps" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpSubMntrEgrQosShedPIRLo indicates lower 32 bits of the egress Qos Scheduler PIR (Peak Info rate). This value is received via ANCP, and potentially modified by the system using the ANCP policy. When the value of tmnxAncpSubMntrEgrQosShedPIRHi along with the value of tmnxAncpSubMntrEgrQosShedPIRLo is equal to 4294967295 (0xFFFFFFFF), rate for this scheduler indicates maximum rate. The value of tmnxAncpSubMntrEgrQosShedPIRHi equal to 4294967295 (0xFFFFFFFF) and the value of tmnxAncpSubMntrEgrQosShedPIRLo equal to 4294967294 (0xFFFFFFFE) indicates no overrides." ::= { tmnxAncpSubMonitorEntry 9 } tmnxAncpStringDslLineInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxAncpStringDslLineInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table tmnxAncpStringDslLineInfoTable contains DSL line information about all ANCP-strings known to the system." ::= { tmnxGsmpObjects 26 } tmnxAncpStringDslLineInfoEntry OBJECT-TYPE SYNTAX TmnxAncpStringDslLineInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains DSL line information about an ANCP-string known to the system. Rows are created/deleted automatically by the system. The table contains read-only information only." INDEX { tmnxAncpStringLineInfoAncpString, tmnxAncpStringLineInfoType } ::= { tmnxAncpStringDslLineInfoTable 1 } TmnxAncpStringDslLineInfoEntry ::= SEQUENCE { tmnxAncpStringLineInfoAncpString DisplayString, tmnxAncpStringLineInfoType INTEGER, tmnxAncpStringLineInfoValue Unsigned32 } tmnxAncpStringLineInfoAncpString OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpStringLineInfoAncpString indicates the ANCP-string for which this row entry contains information." ::= { tmnxAncpStringDslLineInfoEntry 1 } tmnxAncpStringLineInfoType OBJECT-TYPE SYNTAX INTEGER { actualNetDataRateUpstream (129), actualNetDataRateDownstream (130), minimumNetDataRateUpstream (131), minimumNetDataRateDownstream (132), attainableNetDataRateUpstream (133), attainableNetDataRateDownstream (134), maximumNetDataRateUpstream (135), maximumNetDataRateDownstream (136), minimumNetLowPowerDataRateUpstream (137), minimumNetLowPowerDataRateDownstream (138), maximumInterleavingDelayUpstream (139), actualInterleavingDelayUpstream (140), maximumInterleavingDelayDownstream (141), actualInterleavingDelayDownstream (142), dslLineState (143), accessLoopEncapsulation (144), dslType (145) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxAncpStringLineInfoType indicates the type of the DSL line information attribute for which this row entry contains information." ::= { tmnxAncpStringDslLineInfoEntry 2 } tmnxAncpStringLineInfoValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxAncpStringLineInfoValue contains the value of the DSL line information attribute for which this row entry contains information." ::= { tmnxAncpStringDslLineInfoEntry 3 } tmnxGsmpCompliance OBJECT IDENTIFIER ::= { tmnxSRConfs 39 } tmnxGsmpCompliances OBJECT IDENTIFIER ::= { tmnxGsmpCompliance 1 } tmnxGsmpV5v0MIBCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for GSMP objects in TIMETRA-GSMP-MIB." MODULE MANDATORY-GROUPS { tmnxGsmpV5v0Group, tmnxGsmpV5v0GNotificationGroup } ::= { tmnxGsmpCompliances 1 } tmnxGsmpV11v0MIBCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for GSMP objects in TIMETRA-GSMP-MIB on Nokia 7x50 SR series systems release 11.0." MODULE MANDATORY-GROUPS { tmnxGsmpV11v0Group, tmnxGsmpV5v0GNotificationGroup, tmnxGsmpSchedulerRateV11v0Group } ::= { tmnxGsmpCompliances 2 } tmnxGsmpV13v0MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for GSMP objects in TIMETRA-GSMP-MIB on Nokia 7x50 SR series systems release 13.0." MODULE MANDATORY-GROUPS { tmnxGsmpV5v0GNotificationGroup, tmnxGsmpSchedulerRateV11v0Group, tmnxGsmpQosV13v0Group, tmnxGsmpV13v0Group } ::= { tmnxGsmpCompliances 4 } tmnxGsmpGroups OBJECT IDENTIFIER ::= { tmnxGsmpCompliance 2 } tmnxGsmpV5v0Group OBJECT-GROUP OBJECTS { tmnxGsmpConfigTableLastChange, tmnxGsmpGroupConfigTableLastChange, tmnxGsmpGroupNbrTableLastChange, tmnxAncpStaticMapSapTblLastChg, tmnxAncpStaticMapMssTblLastChg, tmnxAncpSubProfileTblLastChange, tmnxAncpPolicyTableLastChange, tmnxGsmpCfgLastChange, tmnxGsmpCfgAdminState, tmnxGsmpGrpCfgLastChange, tmnxGsmpGrpCfgRowStatus, tmnxGsmpGrpCfgAdminState, tmnxGsmpGrpCfgKeepalive, tmnxGsmpGrpCfgHoldMultiplier, tmnxGsmpGrpCfgDescription, tmnxGsmpGrpCfgAncpOamCap, tmnxGsmpGrpCfgAncpDynTopoDiscCap, tmnxGsmpGrpNbrLastChange, tmnxGsmpGrpNbrRowStatus, tmnxGsmpGrpNbrAdminState, tmnxGsmpGrpNbrLocalAddrType, tmnxGsmpGrpNbrLocalAddr, tmnxGsmpGrpNbrDescription, tmnxGsmpGrpNbrPrioMarkType, tmnxGsmpGrpNbrPrioMarkPrec, tmnxGsmpGrpNbrPrioMarkDscp, tmnxAncpStaticMapSapLastChange, tmnxAncpStaticMapSapRowStatus, tmnxAncpStaticMapSapAncpPolName, tmnxAncpStaticMapMssLastChange, tmnxAncpStaticMapMssRowStatus, tmnxAncpStaticMapMssAncpPolName, tmnxAncpSubProfileAncpPolicy, tmnxAncpPlcyLastChange, tmnxAncpPlcyRowStatus, tmnxAncpPlcyIngRateAdjustment, tmnxAncpPlcyIngRateReduction, tmnxAncpPlcyIngRateMonitor, tmnxAncpPlcyIngRateMonitorNtf, tmnxAncpPlcyIngRateModType, tmnxAncpPlcyIngRateModSched, tmnxAncpPlcyEgrRateAdjustment, tmnxAncpPlcyEgrRateReduction, tmnxAncpPlcyEgrRateMonitor, tmnxAncpPlcyEgrRateMonitorNtf, tmnxAncpPlcyEgrRateModType, tmnxAncpPlcyEgrRateModSched, tmnxAncpPlcyDisableShcv, tmnxAncpPlcyDisableShcvHldTime, tmnxAncpPlcyDisableShcvNtf, tmnxAncpStrInfAssociation, tmnxAncpStrInfSapPortId, tmnxAncpStrInfSapEncapValue, tmnxAncpStrInfMultSvcSiteName, tmnxAncpStrInfMultSvcSiteCust, tmnxAncpStrInfSubscrIdent, tmnxAncpStrInfLineState, tmnxAncpStrInfAncpPolicyName, tmnxAncpStrInfIngrRate, tmnxAncpStrInfAdjustedIngrRate, tmnxAncpStrInfEgrRate, tmnxAncpStrInfAdjustedEgrRate, tmnxAncpStrInfServId, tmnxAncpStrInfNeighborAddrType, tmnxAncpStrInfNeighborAddr, tmnxAncpStrInfTcpPort, tmnxAncpStrInfGroupName, tmnxAncpSesNbrPeerInstance, tmnxAncpSesNbrPeerPort, tmnxAncpSesNbrPeerName, tmnxAncpSesSenderInstance, tmnxAncpSesSenderPort, tmnxAncpSesSenderName, tmnxAncpSesNbrTimeouts, tmnxAncpSesNbrMaxNbrOfTimeouts, tmnxAncpSesNbrTimer, tmnxAncpSesSenderTimer, tmnxAncpSesNegotiatedCaps, tmnxAncpSesConfiguredCaps, tmnxAncpSesGroupName, tmnxAncpSesState, tmnxAncpSesLocalAddrType, tmnxAncpSesLocalAddr, tmnxAncpSesStatLastChanged, tmnxAncpSesStatRxDrop, tmnxAncpSesStatTxDrop, tmnxAncpSesStatRxSyn, tmnxAncpSesStatTxSyn, tmnxAncpSesStatRxSynAck, tmnxAncpSesStatTxSynAck, tmnxAncpSesStatRxAck, tmnxAncpSesStatTxAck, tmnxAncpSesStatRxRstAck, tmnxAncpSesStatTxRstAck, tmnxAncpSesStatRxPortUp, tmnxAncpSesStatTxPortUp, tmnxAncpSesStatRxPortDown, tmnxAncpSesStatTxPortDown, tmnxAncpSesStatRxLoopback, tmnxAncpSesStatTxLoopback, tmnxAncpSapMntrEgrAggRateLimit, tmnxAncpSapMntrAncpString, tmnxAncpSapIngMntrQosShedPIR, tmnxAncpSapIngMntrAncpString, tmnxAncpSapEgrMntrQosShedPIR, tmnxAncpSapEgrMntrAncpString, tmnxAncpMssMntrEgrAggRateLimit, tmnxAncpMssMntrAncpString, tmnxAncpMssIngMntrQosShedPIR, tmnxAncpMssIngMntrAncpString, tmnxAncpMssEgrMntrQosShedPIR, tmnxAncpMssEgrMntrAncpString, tmnxAncpSubMntrIngQosShedName, tmnxAncpSubMntrIngQosShedPIR, tmnxAncpSubMntrEgrQosShedName, tmnxAncpSubMntrEgrQosShedPIR, tmnxAncpSubMntrEgrAggRateLimit } STATUS obsolete DESCRIPTION "The group of objects supporting management of the GSMP feature on Nokia 7x50 SR series systems." ::= { tmnxGsmpGroups 1 } tmnxGsmpV5v0GNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxAncpIngRateMonitorEvent, tmnxAncpEgrRateMonitorEvent, tmnxAncpShcvDisabledEvent, tmnxAncpSesRejected, tmnxAncpStringRejected } STATUS current DESCRIPTION "The group of notifications supporting management of the GSMP feature on Nokia 7x50 SR series systems." ::= { tmnxGsmpGroups 2 } tmnxGsmpNotificationObjV5v0Group OBJECT-GROUP OBJECTS { tmnxNotifAncpString, tmnxNotifAncpPolicyName, tmnxNotifAncpPlcyActualRate, tmnxAncpRejectReason } STATUS current DESCRIPTION "The group of objects supporting management of GSMP notification objects on Nokia 7x50 SR series systems." ::= { tmnxGsmpGroups 3 } tmnxGsmpV11v0Group OBJECT-GROUP OBJECTS { tmnxGsmpConfigTableLastChange, tmnxGsmpGroupConfigTableLastChange, tmnxGsmpGroupNbrTableLastChange, tmnxAncpStaticMapSapTblLastChg, tmnxAncpStaticMapMssTblLastChg, tmnxAncpSubProfileTblLastChange, tmnxAncpPolicyTableLastChange, tmnxGsmpCfgLastChange, tmnxGsmpCfgAdminState, tmnxGsmpGrpCfgLastChange, tmnxGsmpGrpCfgRowStatus, tmnxGsmpGrpCfgAdminState, tmnxGsmpGrpCfgKeepalive, tmnxGsmpGrpCfgHoldMultiplier, tmnxGsmpGrpCfgDescription, tmnxGsmpGrpCfgAncpOamCap, tmnxGsmpGrpCfgAncpDynTopoDiscCap, tmnxGsmpGrpNbrLastChange, tmnxGsmpGrpNbrRowStatus, tmnxGsmpGrpNbrAdminState, tmnxGsmpGrpNbrLocalAddrType, tmnxGsmpGrpNbrLocalAddr, tmnxGsmpGrpNbrDescription, tmnxGsmpGrpNbrPrioMarkType, tmnxGsmpGrpNbrPrioMarkPrec, tmnxGsmpGrpNbrPrioMarkDscp, tmnxAncpStaticMapSapLastChange, tmnxAncpStaticMapSapRowStatus, tmnxAncpStaticMapSapAncpPolName, tmnxAncpStaticMapMssLastChange, tmnxAncpStaticMapMssRowStatus, tmnxAncpStaticMapMssAncpPolName, tmnxAncpSubProfileAncpPolicy, tmnxAncpPlcyLastChange, tmnxAncpPlcyRowStatus, tmnxAncpPlcyIngRateAdjustment, tmnxAncpPlcyIngRateReduction, tmnxAncpPlcyIngRateMonitor, tmnxAncpPlcyIngRateMonitorNtf, tmnxAncpPlcyIngRateModType, tmnxAncpPlcyIngRateModSched, tmnxAncpPlcyEgrRateAdjustment, tmnxAncpPlcyEgrRateReduction, tmnxAncpPlcyEgrRateMonitor, tmnxAncpPlcyEgrRateMonitorNtf, tmnxAncpPlcyEgrRateModType, tmnxAncpPlcyEgrRateModSched, tmnxAncpPlcyDisableShcv, tmnxAncpPlcyDisableShcvHldTime, tmnxAncpPlcyDisableShcvNtf, tmnxAncpStrInfAssociation, tmnxAncpStrInfSapPortId, tmnxAncpStrInfSapEncapValue, tmnxAncpStrInfMultSvcSiteName, tmnxAncpStrInfMultSvcSiteCust, tmnxAncpStrInfSubscrIdent, tmnxAncpStrInfLineState, tmnxAncpStrInfAncpPolicyName, tmnxAncpStrInfIngrRate, tmnxAncpStrInfAdjustedIngrRate, tmnxAncpStrInfEgrRate, tmnxAncpStrInfAdjustedEgrRate, tmnxAncpStrInfServId, tmnxAncpStrInfNeighborAddrType, tmnxAncpStrInfNeighborAddr, tmnxAncpStrInfTcpPort, tmnxAncpStrInfGroupName, tmnxAncpSesNbrPeerInstance, tmnxAncpSesNbrPeerPort, tmnxAncpSesNbrPeerName, tmnxAncpSesSenderInstance, tmnxAncpSesSenderPort, tmnxAncpSesSenderName, tmnxAncpSesNbrTimeouts, tmnxAncpSesNbrMaxNbrOfTimeouts, tmnxAncpSesNbrTimer, tmnxAncpSesSenderTimer, tmnxAncpSesNegotiatedCaps, tmnxAncpSesConfiguredCaps, tmnxAncpSesGroupName, tmnxAncpSesState, tmnxAncpSesLocalAddrType, tmnxAncpSesLocalAddr, tmnxAncpSesStatLastChanged, tmnxAncpSesStatRxDrop, tmnxAncpSesStatTxDrop, tmnxAncpSesStatRxSyn, tmnxAncpSesStatTxSyn, tmnxAncpSesStatRxSynAck, tmnxAncpSesStatTxSynAck, tmnxAncpSesStatRxAck, tmnxAncpSesStatTxAck, tmnxAncpSesStatRxRstAck, tmnxAncpSesStatTxRstAck, tmnxAncpSesStatRxPortUp, tmnxAncpSesStatTxPortUp, tmnxAncpSesStatRxPortDown, tmnxAncpSesStatTxPortDown, tmnxAncpSesStatRxLoopback, tmnxAncpSesStatTxLoopback, tmnxAncpSapMntrEgrAggRateLimit, tmnxAncpSapMntrAncpString, tmnxAncpSapIngMntrAncpString, tmnxAncpSapEgrMntrAncpString, tmnxAncpMssMntrEgrAggRateLimit, tmnxAncpMssMntrAncpString, tmnxAncpMssIngMntrAncpString, tmnxAncpMssEgrMntrAncpString, tmnxAncpSubMntrIngQosShedName, tmnxAncpSubMntrEgrQosShedName, tmnxAncpSubMntrEgrAggRateLimit, tmnxAncpSesVersion, tmnxAncpSesPartitionID, tmnxGsmpGrpCfgPersistencyDb, tmnxGsmpGrpCfgIdleFilter, tmnxAncpStringLineInfoValue, tmnxAncpStrInfPersistKey } STATUS obsolete DESCRIPTION "The group of objects supporting management of the GSMP feature on Nokia 7x50 SR series systems release 11.0." ::= { tmnxGsmpGroups 4 } tmnxGsmpSchedulerRateV11v0Group OBJECT-GROUP OBJECTS { tmnxAncpSapIngMntrQosShedPIRHi, tmnxAncpSapIngMntrQosShedPIRLo, tmnxAncpSapEgrMntrQosShedPIRHi, tmnxAncpSapEgrMntrQosShedPIRLo, tmnxAncpMssIngMntrQosShedPIRHi, tmnxAncpMssIngMntrQosShedPIRLo, tmnxAncpMssEgrMntrQosShedPIRHi, tmnxAncpMssEgrMntrQosShedPIRLo, tmnxAncpSubMntrIngQosShedPIRHi, tmnxAncpSubMntrIngQosShedPIRLo, tmnxAncpSubMntrEgrQosShedPIRHi, tmnxAncpSubMntrEgrQosShedPIRLo } STATUS current DESCRIPTION "The group of objects supporting management of Scheduler policies on GSMP feature for Nokia SROS series systems release 11.0." ::= { tmnxGsmpGroups 5 } tmnxGsmpObsoletedV11v0Group OBJECT-GROUP OBJECTS { tmnxAncpMssIngMntrQosShedPIR, tmnxAncpMssEgrMntrQosShedPIR, tmnxAncpSapIngMntrQosShedPIR, tmnxAncpSapEgrMntrQosShedPIR, tmnxAncpSubMntrIngQosShedPIR, tmnxAncpSubMntrEgrQosShedPIR } STATUS current DESCRIPTION "The group of objects obsoleted supporting management of GSMP feature on Nokia SROS series systems release 11.0." ::= { tmnxGsmpGroups 6 } tmnxGsmpQosV13v0Group OBJECT-GROUP OBJECTS { tmnxAncpSapMntrEgrAggRateLmt, tmnxAncpMssMntrEgrAggRateLmt } STATUS current DESCRIPTION "The group of objects supporting management of GSMP feature for Nokia SROS series systems release 13.0." ::= { tmnxGsmpGroups 7 } tmnxGsmpV13v0Group OBJECT-GROUP OBJECTS { tmnxGsmpConfigTableLastChange, tmnxGsmpGroupConfigTableLastChange, tmnxGsmpGroupNbrTableLastChange, tmnxAncpStaticMapSapTblLastChg, tmnxAncpStaticMapMssTblLastChg, tmnxAncpSubProfileTblLastChange, tmnxAncpPolicyTableLastChange, tmnxGsmpCfgLastChange, tmnxGsmpCfgAdminState, tmnxGsmpGrpCfgLastChange, tmnxGsmpGrpCfgRowStatus, tmnxGsmpGrpCfgAdminState, tmnxGsmpGrpCfgKeepalive, tmnxGsmpGrpCfgHoldMultiplier, tmnxGsmpGrpCfgDescription, tmnxGsmpGrpCfgAncpOamCap, tmnxGsmpGrpCfgAncpDynTopoDiscCap, tmnxGsmpGrpNbrLastChange, tmnxGsmpGrpNbrRowStatus, tmnxGsmpGrpNbrAdminState, tmnxGsmpGrpNbrLocalAddrType, tmnxGsmpGrpNbrLocalAddr, tmnxGsmpGrpNbrDescription, tmnxGsmpGrpNbrPrioMarkType, tmnxGsmpGrpNbrPrioMarkPrec, tmnxGsmpGrpNbrPrioMarkDscp, tmnxAncpStaticMapSapLastChange, tmnxAncpStaticMapSapRowStatus, tmnxAncpStaticMapSapAncpPolName, tmnxAncpStaticMapMssLastChange, tmnxAncpStaticMapMssRowStatus, tmnxAncpStaticMapMssAncpPolName, tmnxAncpSubProfileAncpPolicy, tmnxAncpPlcyLastChange, tmnxAncpPlcyRowStatus, tmnxAncpPlcyIngRateAdjustment, tmnxAncpPlcyIngRateReduction, tmnxAncpPlcyIngRateMonitor, tmnxAncpPlcyIngRateMonitorNtf, tmnxAncpPlcyIngRateModType, tmnxAncpPlcyIngRateModSched, tmnxAncpPlcyEgrRateAdjustment, tmnxAncpPlcyEgrRateReduction, tmnxAncpPlcyEgrRateMonitor, tmnxAncpPlcyEgrRateMonitorNtf, tmnxAncpPlcyEgrRateModType, tmnxAncpPlcyEgrRateModSched, tmnxAncpPlcyDisableShcv, tmnxAncpPlcyDisableShcvHldTime, tmnxAncpPlcyDisableShcvNtf, tmnxAncpStrInfAssociation, tmnxAncpStrInfSapPortId, tmnxAncpStrInfSapEncapValue, tmnxAncpStrInfMultSvcSiteName, tmnxAncpStrInfMultSvcSiteCust, tmnxAncpStrInfSubscrIdent, tmnxAncpStrInfLineState, tmnxAncpStrInfAncpPolicyName, tmnxAncpStrInfIngrRate, tmnxAncpStrInfAdjustedIngrRate, tmnxAncpStrInfEgrRate, tmnxAncpStrInfAdjustedEgrRate, tmnxAncpStrInfServId, tmnxAncpStrInfNeighborAddrType, tmnxAncpStrInfNeighborAddr, tmnxAncpStrInfTcpPort, tmnxAncpStrInfGroupName, tmnxAncpSesNbrPeerInstance, tmnxAncpSesNbrPeerPort, tmnxAncpSesNbrPeerName, tmnxAncpSesSenderInstance, tmnxAncpSesSenderPort, tmnxAncpSesSenderName, tmnxAncpSesNbrTimeouts, tmnxAncpSesNbrMaxNbrOfTimeouts, tmnxAncpSesNbrTimer, tmnxAncpSesSenderTimer, tmnxAncpSesNegotiatedCaps, tmnxAncpSesConfiguredCaps, tmnxAncpSesGroupName, tmnxAncpSesState, tmnxAncpSesLocalAddrType, tmnxAncpSesLocalAddr, tmnxAncpSesStatLastChanged, tmnxAncpSesStatRxDrop, tmnxAncpSesStatTxDrop, tmnxAncpSesStatRxSyn, tmnxAncpSesStatTxSyn, tmnxAncpSesStatRxSynAck, tmnxAncpSesStatTxSynAck, tmnxAncpSesStatRxAck, tmnxAncpSesStatTxAck, tmnxAncpSesStatRxRstAck, tmnxAncpSesStatTxRstAck, tmnxAncpSesStatRxPortUp, tmnxAncpSesStatTxPortUp, tmnxAncpSesStatRxPortDown, tmnxAncpSesStatTxPortDown, tmnxAncpSesStatRxLoopback, tmnxAncpSesStatTxLoopback, tmnxAncpSapMntrAncpString, tmnxAncpSapIngMntrAncpString, tmnxAncpSapEgrMntrAncpString, tmnxAncpMssMntrAncpString, tmnxAncpMssIngMntrAncpString, tmnxAncpMssEgrMntrAncpString, tmnxAncpSubMntrIngQosShedName, tmnxAncpSubMntrEgrQosShedName, tmnxAncpSubMntrEgrAggRateLimit, tmnxAncpSesVersion, tmnxAncpSesPartitionID, tmnxGsmpGrpCfgPersistencyDb, tmnxGsmpGrpCfgIdleFilter, tmnxAncpStringLineInfoValue, tmnxAncpStrInfPersistKey } STATUS current DESCRIPTION "The group of objects supporting management of the GSMP feature on Nokia 7x50 SR series systems release 13.0." ::= { tmnxGsmpGroups 8 } tmnxGsmpObsoletedV13v0Group OBJECT-GROUP OBJECTS { tmnxAncpSapMntrEgrAggRateLimit, tmnxAncpMssMntrEgrAggRateLimit } STATUS current DESCRIPTION "The group of objects supporting management of the GSMP feature on Nokia 7x50 SR series systems release 13.0." ::= { tmnxGsmpGroups 9 } tmnxGsmpNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 39 } tmnxGsmpNotifications OBJECT IDENTIFIER ::= { tmnxGsmpNotifyPrefix 0 } tmnxAncpIngRateMonitorEvent NOTIFICATION-TYPE OBJECTS { tmnxNotifAncpString, tmnxNotifAncpPolicyName, tmnxNotifAncpPlcyActualRate } STATUS current DESCRIPTION "This Notification is sent when the ingress rate monitor function for the port identified by tmnxNotifAncpString detects that the scheduler rate has dropped below tmnxAncpPlcyIngRateMonitor." ::= { tmnxGsmpNotifications 1 } tmnxAncpEgrRateMonitorEvent NOTIFICATION-TYPE OBJECTS { tmnxNotifAncpString, tmnxNotifAncpPolicyName, tmnxNotifAncpPlcyActualRate } STATUS current DESCRIPTION "This Notification is sent when the egress rate monitor function for the port identified by tmnxNotifAncpString detects that the scheduler rate has dropped below tmnxAncpPlcyEgrRateMonitor." ::= { tmnxGsmpNotifications 2 } tmnxAncpShcvDisabledEvent NOTIFICATION-TYPE OBJECTS { tmnxNotifAncpString, tmnxNotifAncpPolicyName } STATUS current DESCRIPTION "This Notification is sent when the shcv (subscriber host connectivity verification) is disabled for all hosts of the subscriber associated with the tmnxNotifAncpString when a port-down event was received for the tmnxNotifAncpString." ::= { tmnxGsmpNotifications 3 } tmnxAncpSesRejected NOTIFICATION-TYPE OBJECTS { tmnxAncpRejectReason } STATUS current DESCRIPTION "The tmnxAncpSesRejected notification is sent when an incoming ANCP session is rejected by the system. Details on why this happened are specified in tmnxAncpRejectReason." ::= { tmnxGsmpNotifications 4 } tmnxAncpStringRejected NOTIFICATION-TYPE OBJECTS { tmnxAncpRejectReason } STATUS current DESCRIPTION "The tmnxAncpStringRejected notification is sent when an incoming ANCP string received on an established ANCP session is rejected by the system. Details on why this happened are specified in tmnxAncpRejectReason." ::= { tmnxGsmpNotifications 5 } END