TIMETRA-ELMI-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Counter32, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, TimeStamp
                                                         FROM SNMPv2-TC
    tmnxChassisIndex
                                                         FROM TIMETRA-CHASSIS-MIB
    timetraSRMIBModules, tmnxSRConfs,
    tmnxSRNotifyPrefix, tmnxSRObjs
                                                         FROM TIMETRA-GLOBAL-MIB
    tmnxPortEtherEntry, tmnxPortPortID
                                                         FROM TIMETRA-PORT-MIB
    TmnxEncapVal
                                                         FROM TIMETRA-TC-MIB
    ;

tmnxElmiMIBModule                MODULE-IDENTITY
    LAST-UPDATED "200810230000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia SROS Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision the
         Ethernet Link Management Interface (E-LMI) components of the Nokia
         7x50 device.

         Copyright 2009-2018 Nokia.  All rights reserved.
         Reproduction of this document is authorized on the condition that
         the foregoing copyright notice is included.

         This SNMP MIB module (Specification) embodies Nokia's
         proprietary intellectual property.  Nokia retains
         all title and ownership in the Specification, including any
         revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied 'as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "200810230000Z"
    DESCRIPTION
        "Rev 1.0                23 Oct 2008 00:00
         1.0 release of the TIMETRA-ELMI-MIB."

    ::= { timetraSRMIBModules 68 }

TmnxElmiIdentifierString         ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxElmiIdentifierString is a readable description that specifies
         the Ethernet Link Management Interface Identifier. The value must be
         unique in the system, and match the identifier on the connected
         system."
    SYNTAX      OCTET STRING (SIZE (0..100))

tmnxElmiObjs                     OBJECT IDENTIFIER ::= { tmnxSRObjs 68 }

tmnxElmiConfigurationTimeStamps  OBJECT IDENTIFIER ::= { tmnxElmiObjs 0 }

tmnxElmiIfConfigTableLastChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The tmnxElmiIfConfigTableLastChanged indicates the time, since system
         startup, when a row in the tmnxElmiIfConfigTable last changed."
    ::= { tmnxElmiConfigurationTimeStamps 1 }

tmnxElmiEvcCfgTableLastChanged   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The tmnxElmiEvcCfgTableLastChanged indicates the time, since system
         startup, when a row in the tmnxElmiEvcConfigTable last changed."
    ::= { tmnxElmiConfigurationTimeStamps 2 }

tmnxElmiConfigurations           OBJECT IDENTIFIER ::= { tmnxElmiObjs 1 }

tmnxElmiIfConfigTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxElmiIfConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxElmiIfConfigTable has an entry for each port in the system
         that is configured for Ethernet LMI. It contains the service
         attributes and associated parameters of Ethernet services observable
         for the User Network Interface (UNI) to User Network Interface."
    ::= { tmnxElmiConfigurations 1 }

tmnxElmiIfConfigEntry            OBJECT-TYPE
    SYNTAX      TmnxElmiIfConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Parameters for a particular User Network Interface. Entries cannot
         be created and deleted via SNMP SET operations.

         Rows in this table are created and destroyed by the system, and can
         not be created or deleted by SNMP SET operations. Each row references
         an existing tmnxPortEtherEntry row entry."
    AUGMENTS    { tmnxPortEtherEntry }
    ::= { tmnxElmiIfConfigTable 1 }

TmnxElmiIfConfigEntry            ::= SEQUENCE
{
    tmnxElmiIfCfgMode                INTEGER,
    tmnxElmiIfCfgStatus              INTEGER,
    tmnxElmiIfCfgN393                Unsigned32,
    tmnxElmiIfCfgT391                Unsigned32,
    tmnxElmiIfCfgT392                Unsigned32,
    tmnxElmiIfCfgUniType             INTEGER,
    tmnxElmiIfCfgUniIdentifier       TmnxElmiIdentifierString
}

tmnxElmiIfCfgMode                OBJECT-TYPE
    SYNTAX      INTEGER {
        none (0),
        uniN (1),
        uniC (2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgMode specifies the mode of the interface. It
         can be set as User Network Interface Customer (UNI-C), User Network
         Interface Network (UNI-N), or 'none (0)' to disable E-LMI."
    DEFVAL      { none }
    ::= { tmnxElmiIfConfigEntry 1 }

tmnxElmiIfCfgStatus              OBJECT-TYPE
    SYNTAX      INTEGER {
        up   (1),
        down (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgStatus indicates the operational status of
         the Ethernet LMI interface
         The valid options are:
                 up    (1)  -- The E-LMI interface is operational.
                 down  (2)  -- The E-LMI error threshold exceeded."
    DEFVAL      { up }
    ::= { tmnxElmiIfConfigEntry 2 }

tmnxElmiIfCfgN393                OBJECT-TYPE
    SYNTAX      Unsigned32 (2..10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgN393 specifies the ELMI monitored count of
         the consecutive errors for both UNI-N and UNI-C. It is used to
         determine if E-LMI is operational or not."
    DEFVAL      { 4 }
    ::= { tmnxElmiIfConfigEntry 3 }

tmnxElmiIfCfgT391                OBJECT-TYPE
    SYNTAX      Unsigned32 (5..30)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgT391 specifies the polling timer for the
         E-LMI UNI-C."
    DEFVAL      { 10 }
    ::= { tmnxElmiIfConfigEntry 4 }

tmnxElmiIfCfgT392                OBJECT-TYPE
    SYNTAX      Unsigned32 (5..30)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgT392 specifies the polling verification
         timer for the E-LMI UNI-N."
    DEFVAL      { 15 }
    ::= { tmnxElmiIfConfigEntry 5 }

tmnxElmiIfCfgUniType             OBJECT-TYPE
    SYNTAX      INTEGER {
        notUsed                (0),
        allToOneBundling       (1),
        svcMultiplexNoBundling (2),
        bundling               (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgUniType indicates the information retrieved
         from the CE-VLAN ID/EVC Map Type contained in the UNI Status
         Information Element.

         The valid options are:
                notUsed                (0) -- unused value.
                allToOneBundling       (1) -- All VLANs are associated with a
                                              single EVC.
                svcMultiplexNoBundling (2) -- One VLAN is associated with a
                                              single EVC.
                bundling               (3) -- multiple VLANs can be associated
                                              with a single EVC."
    ::= { tmnxElmiIfConfigEntry 6 }

tmnxElmiIfCfgUniIdentifier       OBJECT-TYPE
    SYNTAX      TmnxElmiIdentifierString (SIZE (0..64))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiIfCfgUniIdentifier specifies the UNI identifier
         of the E-LMI entity."
    ::= { tmnxElmiIfConfigEntry 7 }

tmnxElmiEvcConfigTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxElmiEvcConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxElmiEvcConfigTable has an entry for each SAP in the system
         that is configured for ELMI. It contains the service attributes for
         the Ethernet Virtual Connection (EVC). An EVC is an association of two
         or more UNIs."
    ::= { tmnxElmiConfigurations 2 }

tmnxElmiEvcConfigEntry           OBJECT-TYPE
    SYNTAX      TmnxElmiEvcConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Parameters for a particular Ethernet Virtual Connection (EVC)
         Interface. Entries cannot be created and deleted via SNMP SET
         operations.

         Rows in this table are created and destroyed by the system, and can
         not be created or deleted by SNMP SET operations.

         Rows are created for q-tag encapsulated Ethernet SAPs."
    INDEX       {
        tmnxChassisIndex,
        tmnxPortPortID,
        tmnxElmiEvcCfgVlanId
    }
    ::= { tmnxElmiEvcConfigTable 1 }

TmnxElmiEvcConfigEntry           ::= SEQUENCE
{
    tmnxElmiEvcCfgVlanId             TmnxEncapVal,
    tmnxElmiEvcCfgIdentifier         TmnxElmiIdentifierString,
    tmnxElmiEvcCfgType               INTEGER,
    tmnxElmiEvcCfgStatus             INTEGER,
    tmnxElmiEvcCfgStatusTimeStamp    TimeStamp
}

tmnxElmiEvcCfgVlanId             OBJECT-TYPE
    SYNTAX      TmnxEncapVal
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiEvcCfgVlanId specifies the third index for the
         tmnxElmiEvcConfigEntry, as well as the VLAN Identifier of the EVC."
    ::= { tmnxElmiEvcConfigEntry 1 }

tmnxElmiEvcCfgIdentifier         OBJECT-TYPE
    SYNTAX      TmnxElmiIdentifierString
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiEvcCfgIdentifier specifies the unique value used
         in ELMI validation."
    ::= { tmnxElmiEvcConfigEntry 2 }

tmnxElmiEvcCfgType               OBJECT-TYPE
    SYNTAX      INTEGER {
        p2p   (0),
        mp2mp (1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiEvcCfgType indicates the type of EVC configured.
         The valid options are:
                p2p   (0) -- Point-to-point connection
                mp2mp (1) -- Multipoint-to-multipoint connection."
    ::= { tmnxElmiEvcConfigEntry 3 }

tmnxElmiEvcCfgStatus             OBJECT-TYPE
    SYNTAX      INTEGER {
        notActive             (0),
        newAndNotActive       (1),
        active                (2),
        newAndActive          (3),
        partiallyActive       (4),
        newAndPartiallyActive (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiEvcCfgStatus indicates the status reported in the
         EVC Status Information Element.

         An EVC is fully operational when the EVC is capable of transferring
         traffic among all of the UNIs in the EVC.

         The valid options are:
                notActive             (0) -- The EVC is not fully operational.
                newAndNotActive       (1) -- The EVC is newly created and not
                                             fully operational.
                active                (2) -- The EVC is fully operational.
                newAndActive          (3) -- The EVC is newly created and fully
                                             operational.
                partiallyActive       (4) -- The EVC is multipoint-to-
                                             multipoint and some of the EVC
                                             endpoints are operational.

                newAndPartiallyActive (5) -- The EVC is newly created and
                                             'partiallyActive'."
    REFERENCE
        "MEF 16 Section 5.5.3.7"
    ::= { tmnxElmiEvcConfigEntry 4 }

tmnxElmiEvcCfgStatusTimeStamp    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiEvcCfgStatusTimeStamp indicates the time, since
         system startup, when the tmnxElmiEvcCfgStatus changed state."
    ::= { tmnxElmiEvcConfigEntry 5 }

tmnxElmiStatistics               OBJECT IDENTIFIER ::= { tmnxElmiObjs 2 }

tmnxElmiStatTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxElmiStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxElmiStatTable has an entry for each entry in the
         tmnxElmiIfConfigEntry."
    ::= { tmnxElmiStatistics 1 }

tmnxElmiStatEntry                OBJECT-TYPE
    SYNTAX      TmnxElmiStatEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Statistics Entry for an E-LMI Configuration Entry. Entries cannot
         be created and deleted via SNMP SET operations.

         Rows in this table are created and destroyed by the system, and can
         not be created or deleted by SNMP SET operations. Each row references
         an existing tmnxElmiIfConfigEntry row entry."
    AUGMENTS    { tmnxElmiIfConfigEntry }
    ::= { tmnxElmiStatTable 1 }

TmnxElmiStatEntry                ::= SEQUENCE
{
    tmnxElmiStatRxStatusEnqMsgTime   TimeStamp,
    tmnxElmiStatRxStatusEnqMsgs      Counter32,
    tmnxElmiStatStatusEnqMsgTimeouts Counter32,
    tmnxElmiStatTxStatusMsgTime      TimeStamp,
    tmnxElmiStatTxStatusMsgs         Counter32,
    tmnxElmiStatRxStatusCheckTime    TimeStamp,
    tmnxElmiStatTxStatusCheckTime    TimeStamp,
    tmnxElmiStatDiscardedMsgs        Counter32,
    tmnxElmiStatInvRxSeqNumMsgs      Counter32,
    tmnxElmiStatTxAsyncStatusMsgs    Counter32
}

tmnxElmiStatRxStatusEnqMsgTime   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatRxStatusEnqMsgTime indicates the time, since
         system startup, of the last received ELMI Status Enquiry message."
    ::= { tmnxElmiStatEntry 1 }

tmnxElmiStatRxStatusEnqMsgs      OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "messages"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatRxStatusEnqMsgs indicates the number of ELMI
         Status Enquiry messages received on this Ethernet interface."
    ::= { tmnxElmiStatEntry 2 }

tmnxElmiStatStatusEnqMsgTimeouts OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "messages"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatStatusEnqMsgTimeouts indicates the number of
         times the ELMI agent did not receive a Status Enquiry message within
         the allotted time."
    ::= { tmnxElmiStatEntry 3 }

tmnxElmiStatTxStatusMsgTime      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatTxStatusMsgTime indicates the time, since
         system startup, of the last transmitted ELMI Status message."
    ::= { tmnxElmiStatEntry 4 }

tmnxElmiStatTxStatusMsgs         OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "messages"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatTxStatusMsgs indicates the number of ELMI
         Status messages transmitted on this Ethernet interface."
    ::= { tmnxElmiStatEntry 5 }

tmnxElmiStatRxStatusCheckTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatRxStatusCheckTime indicates the time, since
         system startup, of the last received ELMI Status Check message."
    ::= { tmnxElmiStatEntry 6 }

tmnxElmiStatTxStatusCheckTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatTxStatusCheckTime indicates the time, since
         system startup, of the last transmitted ELMI Status Check message."
    ::= { tmnxElmiStatEntry 7 }

tmnxElmiStatDiscardedMsgs        OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "messages"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatDiscardedMsgs indicates the number of times
         the ELMI agent discarded a received message because it wasn't
         expecting it, the type of message was incorrect, or the contents of
         the message were invalid."
    ::= { tmnxElmiStatEntry 8 }

tmnxElmiStatInvRxSeqNumMsgs      OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "messages"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatInvRxSeqNumMsgs indicates the number of times
         the ELMI agent received a message with an invalid receive sequence
         number: i.e. a sequence number that does not match the last
         transmitted sequence number of the agent."
    ::= { tmnxElmiStatEntry 9 }

tmnxElmiStatTxAsyncStatusMsgs    OBJECT-TYPE
    SYNTAX      Counter32
    UNITS       "messages"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxElmiStatTxAsyncStatusMsgs indicates the number of
         single EVC Asynchronous Status messages transmitted."
    ::= { tmnxElmiStatEntry 10 }

tmnxElmiConformance              OBJECT IDENTIFIER ::= { tmnxSRConfs 68 }

tmnxElmiCompliances              OBJECT IDENTIFIER ::= { tmnxElmiConformance 1 }

tmnxElmiCompliance               MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for revision 1.0 of TIMETRA-ELMI-MIB."
    MODULE
        MANDATORY-GROUPS {
            tmnxElmiTimeStampGroup,
            tmnxElmiIfConfigGroup,
            tmnxElmiEvcConfigGroup,
            tmnxElmiStatsGroup,
            tmnxElmiEventGroup
        }
    ::= { tmnxElmiCompliances 1 }

tmnxElmiGroups                   OBJECT IDENTIFIER ::= { tmnxElmiConformance 2 }

tmnxElmiTimeStampGroup           OBJECT-GROUP
    OBJECTS     {
        tmnxElmiIfConfigTableLastChanged,
        tmnxElmiEvcCfgTableLastChanged
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiTimeStampGroup consists of the objects used for monitoring
         overall configuration change of E-LMI configuration for the 7x50."
    ::= { tmnxElmiGroups 1 }

tmnxElmiIfConfigGroup            OBJECT-GROUP
    OBJECTS     {
        tmnxElmiIfCfgMode,
        tmnxElmiIfCfgStatus,
        tmnxElmiIfCfgN393,
        tmnxElmiIfCfgT391,
        tmnxElmiIfCfgT392,
        tmnxElmiIfCfgUniType,
        tmnxElmiIfCfgUniIdentifier
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiIfConfigGroup consists of the objects used for management
         of E-LMI configuration for the 7x50."
    ::= { tmnxElmiGroups 2 }

tmnxElmiEvcConfigGroup           OBJECT-GROUP
    OBJECTS     {
        tmnxElmiEvcCfgIdentifier,
        tmnxElmiEvcCfgType,
        tmnxElmiEvcCfgStatus,
        tmnxElmiEvcCfgStatusTimeStamp
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiEvcConfigGroup consists of the objects used for management
         of E-LMI EVC configuration for the 7x50."
    ::= { tmnxElmiGroups 3 }

tmnxElmiStatsGroup               OBJECT-GROUP
    OBJECTS     {
        tmnxElmiStatRxStatusEnqMsgTime,
        tmnxElmiStatRxStatusEnqMsgs,
        tmnxElmiStatStatusEnqMsgTimeouts,
        tmnxElmiStatTxStatusMsgTime,
        tmnxElmiStatTxStatusMsgs,
        tmnxElmiStatRxStatusCheckTime,
        tmnxElmiStatTxStatusCheckTime,
        tmnxElmiStatDiscardedMsgs,
        tmnxElmiStatInvRxSeqNumMsgs,
        tmnxElmiStatTxAsyncStatusMsgs
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiStatsGroup consists of the objects used for collecting
         statistics for E-LMI for the 7x50."
    ::= { tmnxElmiGroups 4 }

tmnxElmiEventGroup               NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxElmiIfStatusChangeEvent,
        tmnxElmiEVCStatusChangeEvent
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiEventGroup consists of the notifications used for
         generating events for E-LMI for the 7x50."
    ::= { tmnxElmiGroups 5 }

tmnxElmiNotifyPrefix             OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 68 }

tmnxElmiNotifications            OBJECT IDENTIFIER ::= { tmnxElmiNotifyPrefix 0 }

tmnxElmiIfStatusChangeEvent      NOTIFICATION-TYPE
    OBJECTS     {
        tmnxElmiIfCfgStatus
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiIfStatusChangeEvent notification indicates that the
         Ethernet LMI Interface has changed state."
    ::= { tmnxElmiNotifications 1 }

tmnxElmiEVCStatusChangeEvent     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxElmiEvcCfgStatus
    }
    STATUS      current
    DESCRIPTION
        "The tmnxElmiEVCStatusChangeEvent notification indicates that the
         indicated Ethernet Virtual Connection (EVC) has changed its active
         state (i.e. from not active to active).

         The notification is suppressed when the tmnxElmiIfCfgMode is set to
         'none (0)'."
    ::= { tmnxElmiNotifications 2 }

END