ALU-SERVICE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, NOTIFICATION-TYPE, Unsigned32, Integer32 FROM SNMPv2-SMI RowStatus, TimeStamp, TruthValue, MacAddress, TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC InetAddress, InetAddressType FROM INET-ADDRESS-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF aluSARMIBModules, aluSARObjs, aluSARNotifyPrefix, aluSARConfs FROM ALU-SAR-GLOBAL-MIB sapEthernetInfoEntry, sapEthLoopbackEntry, sapEthCfmEntry, sapIpipeInfoEntry, sapTlsInfoEntry, sapAtmInfoEntry, sapPortId, sapEncapValue, sapCemStatsEntry, sapBaseInfoEntry, sapCemInfoEntry FROM TIMETRA-SAP-MIB svcTlsInfoEntry, svcId, TSapIngQueueId, TSapEgrQueueId, ServObjDesc, svcEpipeEntry FROM TIMETRA-SERV-MIB sdpBindBaseStatsEntry, sdpBindCpipeEntry FROM TIMETRA-SDP-MIB TNamedItemOrEmpty, TmnxCustId, TNamedItem, TmnxEnabledDisabled, TSapIngressPolicyID, TSapEgressPolicyID, TBWRateType, TmnxActionType FROM TIMETRA-TC-MIB AluSapSchedulerCir FROM ALU-QOS-MIB AtmVpIdentifier, AtmVcIdentifier FROM ATM-TC-MIB ; aluServiceMIBModule MODULE-IDENTITY LAST-UPDATED "0801180000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia 7x50 Support Web: http://www.nokia.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision extended ATM functionality for the Nokia 7705 SAR series devices. Copyright 2003-2015 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "0801180000Z" DESCRIPTION "Rev 1.0 07 Oct 2008 00:00 Initial version of the ALU-SERVICE-MIB." REVISION "1001180000Z" DESCRIPTION "Rev 2.0 26 May 2010 00:00 Version 2.0 of the ALU-SERVICE-MIB." ::= { aluSARMIBModules 5 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Nokia 7705 SAR series Service extensions -- aluServiceObjs OBJECT IDENTIFIER ::= { aluSARObjs 6 } aluServiceMIBConformance OBJECT IDENTIFIER ::= { aluSARConfs 6 } -- -------------------------------------------------------------------- -- -- ALU-ATM-MIB Textual Conventions -- -- -- Nokia 7705 SAR series Extended IPIPE SAP Table -- aeSapIpipeInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AeSapIpipeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains IPIPE specific SAP information for 7705 series routers." ::= { aluServiceObjs 1 } aeSapIpipeInfoEntry OBJECT-TYPE SYNTAX AeSapIpipeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IPIPE specific information about a SAP." AUGMENTS { sapIpipeInfoEntry } ::= { aeSapIpipeInfoTable 1 } AeSapIpipeInfoEntry ::= SEQUENCE { aeSapIpipeIpcpAssignCeAddress TruthValue, aeSapIpipeIpcpPriDnsAddrType InetAddressType, aeSapIpipeIpcpPriDnsAddr InetAddress, aeSapIpipeIpcpSecDnsAddrType InetAddressType, aeSapIpipeIpcpSecDnsAddr InetAddress } aeSapIpipeIpcpAssignCeAddress OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapIpipeIpcpAssignCeAddress specifies whether or not the configured CE IP address for this IPIPE will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. This value may only be set when the sap encapsulation is ipcpEncap(6)." DEFVAL { false } ::= { aeSapIpipeInfoEntry 1 } aeSapIpipeIpcpPriDnsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapIpipeIpcpPriDnsAddrType specifies the type of aeSapIpipeIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. This object can be set to non-default only when the sap encapsulation is ipcpEncap(6)." DEFVAL { unknown } ::= { aeSapIpipeInfoEntry 2 } aeSapIpipeIpcpPriDnsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapIpipeIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of aeSapIpipeIpcpPriDnsAddrType. This object can be set to non-default only when the sap encapsulation is ipcpEncap(6)." DEFVAL { ''H } ::= { aeSapIpipeInfoEntry 3 } aeSapIpipeIpcpSecDnsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapIpipeIpcpSecDnsAddrType specifies the type of aeSapIpipeIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. This object can be set to non-default only when the sap encapsulation is ipcpEncap(6)." DEFVAL { unknown } ::= { aeSapIpipeInfoEntry 4 } aeSapIpipeIpcpSecDnsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapIpipeIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of aeSapIpipeIpcpSecDnsAddrType. This object can be set to non-default only when the sap encapsulation is ipcpEncap(6)." DEFVAL { ''H } ::= { aeSapIpipeInfoEntry 5 } -- -- Nokia 7705 SAR series Extended TLS SAP Table -- aeSapTlsInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AeSapTlsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains TLS specific SAP information for 7705 series routers." ::= { aluServiceObjs 2 } aeSapTlsInfoEntry OBJECT-TYPE SYNTAX AeSapTlsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about a SAP." AUGMENTS { sapTlsInfoEntry } ::= { aeSapTlsInfoTable 1 } AeSapTlsInfoEntry ::= SEQUENCE { aeSapTlsPPPoEIncludeCircuitId TruthValue, aeSapTlsPPPoECircuitId DisplayString, aeSapTlsForceCVlanForwarding TruthValue } aeSapTlsPPPoEIncludeCircuitId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapTlsPPPoEIncludeCircuitId specifies whether or not the agent-circuit-id as per RFC 4679 will be inserted into PPPoE PADI and PADR messages. This value may only be set when the sap encapsulation is 'atmEncap'. The default of 'atmEncap' SAPs will be derived from 'aeSvcTlsPPPoEIncludeCircuitId'." DEFVAL { false } ::= { aeSapTlsInfoEntry 1 } aeSapTlsPPPoECircuitId OBJECT-TYPE SYNTAX DisplayString (SIZE (1..65)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aeSapTlsPPPoECircuitId indicates the the agent-circuit-id as per RFC 4679 to be inserted into PPPoE PADI and PADR messages. This value is only valid when aeSapTlsPPPoEIncludeCircuitId is 'true'." DEFVAL { ''H } ::= { aeSapTlsInfoEntry 2 } aeSapTlsForceCVlanForwarding OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSapTlsForceCVlanForwarding specifies whether or not the c-tag will be perserve when forwarding to uplink dot1q sap or vlan spoke sdp. This value may only be set when the sap encapsulation is 'dot1q' or 'qinq'." DEFVAL { false } ::= { aeSapTlsInfoEntry 3 } -- -- Nokia 7705 SAR series Extended VPLS ATM SAP Table -- aeSapTlsAtmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AeSapTlsAtmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains TLS specific SAP information for 7705 series routers." ::= { aluServiceObjs 3 } aeSapTlsAtmInfoEntry OBJECT-TYPE SYNTAX AeSapTlsAtmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about a SAP." AUGMENTS { sapAtmInfoEntry } ::= { aeSapTlsAtmInfoTable 1 } AeSapTlsAtmInfoEntry ::= SEQUENCE { aeSapTlsAtmSubscriberVlanTag Unsigned32 } aeSapTlsAtmSubscriberVlanTag OBJECT-TYPE SYNTAX Unsigned32 ('0000'H..'0fff'H) MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the subscriber vlan tag value on a ATM sap for this TLS service. The default value (0xfff) means invalid vlan tag." DEFVAL { '0fff'H } ::= { aeSapTlsAtmInfoEntry 1 } -- -- Nokia 7705 SAR series Extended TLS Info Table -- aeSvcTlsInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AeSvcTlsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains TLS specific SVC information for 7705 series routers." ::= { aluServiceObjs 4 } aeSvcTlsInfoEntry OBJECT-TYPE SYNTAX AeSvcTlsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLS specific information about a Service." AUGMENTS { svcTlsInfoEntry } ::= { aeSvcTlsInfoTable 1 } AeSvcTlsInfoEntry ::= SEQUENCE { aeSvcTlsPPPoEIncludeCircuitId TruthValue, aeSvcTlsL4Hashing TmnxEnabledDisabled } aeSvcTlsPPPoEIncludeCircuitId OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSvcTlsPPPoEIncludeCircuitId specifies whether or not the agent-circuit-id as per RFC 4679 will be inserted by default into PPPoE PADI and PADR messages of SAPs with an encapsulation of 'atmEncap'." DEFVAL { false } ::= { aeSvcTlsInfoEntry 1 } aeSvcTlsL4Hashing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aeSvcTlsL4Hashing specifies whether or not L4 hashing for TLS Ethernet services" DEFVAL { disabled } ::= { aeSvcTlsInfoEntry 2 } -- -- Nokia 7705 SAR series Extended SAP ATM Table -- aeSapApipeAtmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AeSapApipeAtmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains Apipe Atm specific SAP information for 7705 series routers." ::= { aluServiceObjs 6 } aeSapApipeAtmInfoEntry OBJECT-TYPE SYNTAX AeSapApipeAtmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Atm specific information about a SAP." AUGMENTS { sapAtmInfoEntry } ::= { aeSapApipeAtmInfoTable 1 } AeSapApipeAtmInfoEntry ::= SEQUENCE { aeSapApipeAtmVcidTranslatedVpi AtmVpIdentifier, aeSapApipeAtmVcidTranslatedVci AtmVcIdentifier } aeSapApipeAtmVcidTranslatedVpi OBJECT-TYPE SYNTAX AtmVpIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Unique translated Vpi value in NGT1 PW service" DEFVAL { 0 } ::= { aeSapApipeAtmInfoEntry 1 } aeSapApipeAtmVcidTranslatedVci OBJECT-TYPE SYNTAX AtmVcIdentifier MAX-ACCESS read-create STATUS current DESCRIPTION "Unique translated Vci value in NGT1 PW service" DEFVAL { 0 } ::= { aeSapApipeAtmInfoEntry 2 } -------------------------------------- -- SAP Aggregation Group Table -------------------------------------- aeSvcSapAGInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SvcSapAGInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP aggregation group information. Only one group can be created per service. This group is used to associate all N>1's SAP's group." ::= { aluServiceObjs 7 } aeSvcSapAGInfoEntry OBJECT-TYPE SYNTAX SvcSapAGInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SAP aggregation group information about a N>1 service." INDEX { svcId, aeSvcSapAGName } ::= { aeSvcSapAGInfoTable 1 } SvcSapAGInfoEntry ::= SEQUENCE { aeSvcSapAGName TNamedItem, aeSvcSapAGRowStatus RowStatus, aeSvcSapAGDescription ServObjDesc, aeSvcSapAGIngressQosPolicyId TSapIngressPolicyID, aeSvcSapAGEgressQosPolicyId TSapEgressPolicyID, aeSvcSapAGCollectAcctStats TruthValue, aeSvcSapAGAccountingPolicyId Unsigned32 } aeSvcSapAGName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object aeSvcSapAGName specifies the name of the SAP aggregation group. The name must be unique within a Apipe service, however the same name can appear in different Apipe services, in which case they denote different SAP aggregation groups." ::= { aeSvcSapAGInfoEntry 1 } aeSvcSapAGRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aeSvcSapAGRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, there should be no N>1 SAP's." ::= { aeSvcSapAGInfoEntry 2 } aeSvcSapAGDescription OBJECT-TYPE SYNTAX ServObjDesc MAX-ACCESS read-create STATUS current DESCRIPTION "Generic information about this SAP aggregation group." DEFVAL { "" } ::= { aeSvcSapAGInfoEntry 3 } aeSvcSapAGIngressQosPolicyId OBJECT-TYPE SYNTAX TSapIngressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aeSvcSapAGIngressQosPolicyId specifies the row index in the aeSvcSapAGInfoTable corresponding to this ingress QoS policy, or one if no policy is specified. The value 0 is needed for mirror SAPs that cannot have a qos policy assigned." DEFVAL { 1 } ::= { aeSvcSapAGInfoEntry 4 } aeSvcSapAGEgressQosPolicyId OBJECT-TYPE SYNTAX TSapEgressPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aeSvcSapAGEgressQosPolicyId specifies the row index in the aeSvcSapAGInfoTable corresponding to this ingress QoS policy, or one if no policy is specified." DEFVAL { 1 } ::= { aeSvcSapAGInfoEntry 5 } aeSvcSapAGCollectAcctStats OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of this object is 'true' the agent collects accounting statistics on this N>1 SAP." DEFVAL { false } ::= { aeSvcSapAGInfoEntry 6 } aeSvcSapAGAccountingPolicyId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the policy to use to collect accounting statistics on this N>1 SAP. The value zero indicates that the agent should use the default accounting policy, if one exists." DEFVAL { 0 } ::= { aeSvcSapAGInfoEntry 7 } -- -- Base SAP Aggregation Group Statistics Table -- aluSapAGBaseStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapAGBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic statistics of a SAP Aggregation Group." ::= { aluServiceObjs 8 } aluSapAGBaseStatsEntry OBJECT-TYPE SYNTAX AluSapAGBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Basic statistics about a specific SAP Aggregation Group." INDEX { svcId, aeSvcSapAGName } ::= { aluSapAGBaseStatsTable 1 } AluSapAGBaseStatsEntry ::= SEQUENCE { aluSapAGBaseStatsIngressDroppedPackets Counter64, aluSapAGBaseStatsIngressDroppedOctets Counter64, aluSapAGBaseStatsIngressOfferedHiPrioPackets Counter64, aluSapAGBaseStatsIngressOfferedHiPrioOctets Counter64, aluSapAGBaseStatsIngressOfferedLoPrioPackets Counter64, aluSapAGBaseStatsIngressOfferedLoPrioOctets Counter64, aluSapAGBaseStatsIngressDroppedHiPrioPackets Counter64, aluSapAGBaseStatsIngressDroppedHiPrioOctets Counter64, aluSapAGBaseStatsIngressDroppedLoPrioPackets Counter64, aluSapAGBaseStatsIngressDroppedLoPrioOctets Counter64, aluSapAGBaseStatsIngressForwardedInProfPackets Counter64, aluSapAGBaseStatsIngressForwardedInProfOctets Counter64, aluSapAGBaseStatsIngressForwardedOutProfPackets Counter64, aluSapAGBaseStatsIngressForwardedOutProfOctets Counter64, aluSapAGBaseStatsEgressDroppedInProfPackets Counter64, aluSapAGBaseStatsEgressDroppedInProfOctets Counter64, aluSapAGBaseStatsEgressDroppedOutProfPackets Counter64, aluSapAGBaseStatsEgressDroppedOutProfOctets Counter64, aluSapAGBaseStatsEgressForwardedInProfPackets Counter64, aluSapAGBaseStatsEgressForwardedInProfOctets Counter64, aluSapAGBaseStatsEgressForwardedOutProfPackets Counter64, aluSapAGBaseStatsEgressForwardedOutProfOctets Counter64, aluSapAGBaseStatsUnknownVpiVciCellsDropped Counter64, aluSapAGBaseStatsCustId TmnxCustId, aluSapAGBaseStatsIngressOfferedUncoloredPackets Counter64, aluSapAGBaseStatsIngressOfferedUncoloredOctets Counter64, aluSapAGBaseStatsAuthenticationPktsDiscarded Counter32, aluSapAGBaseStatsAuthenticationPktsSuccess Counter32, aluSapAGBaseStatsLastClearedTime TimeStamp } aluSapAGBaseStatsIngressDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped in ingress due to: SAP state, bad checksum, etc." ::= { aluSapAGBaseStatsEntry 1 } aluSapAGBaseStatsIngressDroppedOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets dropped in ingress due to: SAP state, bad checksum, etc." ::= { aluSapAGBaseStatsEntry 2 } aluSapAGBaseStatsIngressOfferedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets offered, as determined by the SAP Aggregation Group's ingress QoS policy." ::= { aluSapAGBaseStatsEntry 3 } aluSapAGBaseStatsIngressOfferedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets offered, as determined by the SAP Aggregation Group's ingress QoS policy." ::= { aluSapAGBaseStatsEntry 4 } aluSapAGBaseStatsIngressOfferedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets offered, as determined by the SAP Aggregation Group's ingress QoS policy." ::= { aluSapAGBaseStatsEntry 5 } aluSapAGBaseStatsIngressOfferedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets offered, as determined by the SAP Aggregation Group's ingress QoS policy." ::= { aluSapAGBaseStatsEntry 6 } aluSapAGBaseStatsIngressDroppedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 7 } aluSapAGBaseStatsIngressDroppedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 8 } aluSapAGBaseStatsIngressDroppedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 9 } aluSapAGBaseStatsIngressDroppedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP Aggregation Group's ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 10 } aluSapAGBaseStatsIngressForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded." ::= { aluSapAGBaseStatsEntry 11 } aluSapAGBaseStatsIngressForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded." ::= { aluSapAGBaseStatsEntry 12 } aluSapAGBaseStatsIngressForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded." ::= { aluSapAGBaseStatsEntry 13 } aluSapAGBaseStatsIngressForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded." ::= { aluSapAGBaseStatsEntry 14 } aluSapAGBaseStatsEgressDroppedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 15 } aluSapAGBaseStatsEgressDroppedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 16 } aluSapAGBaseStatsEgressDroppedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 17 } aluSapAGBaseStatsEgressDroppedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGBaseStatsEntry 18 } aluSapAGBaseStatsEgressForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded." ::= { aluSapAGBaseStatsEntry 19 } aluSapAGBaseStatsEgressForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded." ::= { aluSapAGBaseStatsEntry 20 } aluSapAGBaseStatsEgressForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded." ::= { aluSapAGBaseStatsEntry 21 } aluSapAGBaseStatsEgressForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded." ::= { aluSapAGBaseStatsEntry 22 } aluSapAGBaseStatsUnknownVpiVciCellsDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of cells received with vpi/vci that is not defined under vcid-translation. The cells with unknown vpi/vci are dropped." ::= { aluSapAGBaseStatsEntry 23 } aluSapAGBaseStatsCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { aluSapAGBaseStatsEntry 24 } aluSapAGBaseStatsIngressOfferedUncoloredPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored packets offered, as determined by the SAP ingress QoS policy." ::= { aluSapAGBaseStatsEntry 25 } aluSapAGBaseStatsIngressOfferedUncoloredOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored octets offered, as determined by the SAP ingress QoS policy." ::= { aluSapAGBaseStatsEntry 26 } aluSapAGBaseStatsAuthenticationPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets discarded as result of authentication." ::= { aluSapAGBaseStatsEntry 27 } aluSapAGBaseStatsAuthenticationPktsSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DHCP packets successfully authenticated." ::= { aluSapAGBaseStatsEntry 28 } aluSapAGBaseStatsLastClearedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluSapAGBaseStatsLastClearedTime Indicates the sysUpTime when the counters in this table were last cleared." ::= { aluSapAGBaseStatsEntry 29} ----------------------------------------------------------- -- Ingress QoS Queue SAP Aggregation Group Statistics Table ------------------------------------------------------------ aluSapAGIngQosQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapAGIngQosQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains ingress QoS queue SAP Aggregation Group statistics." ::= { aluServiceObjs 9 } aluSapAGIngQosQStatsEntry OBJECT-TYPE SYNTAX AluSapAGIngQosQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress statistics about a specific SAP Aggregation Group?s QoS queue." INDEX { svcId, aeSvcSapAGName, aluSapAGIngQosQueueId } ::= { aluSapAGIngQosQStatsTable 1 } AluSapAGIngQosQStatsEntry ::= SEQUENCE { aluSapAGIngQosQueueId TSapIngQueueId, aluSapAGIngQosQStatsOfferedHiPrioPackets Counter64, aluSapAGIngQosQStatsDroppedHiPrioPackets Counter64, aluSapAGIngQosQStatsOfferedLoPrioPackets Counter64, aluSapAGIngQosQStatsDroppedLoPrioPackets Counter64, aluSapAGIngQosQStatsOfferedHiPrioOctets Counter64, aluSapAGIngQosQStatsDroppedHiPrioOctets Counter64, aluSapAGIngQosQStatsOfferedLoPrioOctets Counter64, aluSapAGIngQosQStatsDroppedLoPrioOctets Counter64, aluSapAGIngQosQStatsForwardedInProfPackets Counter64, aluSapAGIngQosQStatsForwardedOutProfPackets Counter64, aluSapAGIngQosQStatsForwardedInProfOctets Counter64, aluSapAGIngQosQStatsForwardedOutProfOctets Counter64, aluSapAGIngQosCustId TmnxCustId, aluSapAGIngQosQStatsUncoloredPacketsOffered Counter64, aluSapAGIngQosQStatsUncoloredOctetsOffered Counter64 } aluSapAGIngQosQueueId OBJECT-TYPE SYNTAX TSapIngQueueId MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the ingress QoS queue of this SAP Aggregation Group." ::= { aluSapAGIngQosQStatsEntry 1 } aluSapAGIngQosQStatsOfferedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, offered as determined by the SAP Aggregation Group ingress QoS policy." ::= { aluSapAGIngQosQStatsEntry 2 } aluSapAGIngQosQStatsDroppedHiPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority packets, as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGIngQosQStatsEntry 3 } aluSapAGIngQosQStatsOfferedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, offered as determined by the SAP Aggregation Group ingress QoS policy." ::= { aluSapAGIngQosQStatsEntry 4 } aluSapAGIngQosQStatsDroppedLoPrioPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority packets, as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGIngQosQStatsEntry 5 } aluSapAGIngQosQStatsOfferedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of high priority octets, offered as determined by the SAP Aggregation Group ingress QoS policy." ::= { aluSapAGIngQosQStatsEntry 6 } aluSapAGIngQosQStatsDroppedHiPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGIngQosQStatsEntry 7 } aluSapAGIngQosQStatsOfferedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, offered as determined by the SAP Aggregation Group ingress QoS policy." ::= { aluSapAGIngQosQStatsEntry 8 } aluSapAGIngQosQStatsDroppedLoPrioOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of low priority octets, as determined by the SAP Aggregation Group ingress QoS policy, dropped due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGIngQosQStatsEntry 9 } aluSapAGIngQosQStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded." ::= { aluSapAGIngQosQStatsEntry 10} aluSapAGIngQosQStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile packets (rate above CIR) forwarded." ::= { aluSapAGIngQosQStatsEntry 11 } aluSapAGIngQosQStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded." ::= { aluSapAGIngQosQStatsEntry 12 } aluSapAGIngQosQStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate above CIR) forwarded." ::= { aluSapAGIngQosQStatsEntry 13 } aluSapAGIngQosCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { aluSapAGIngQosQStatsEntry 14 } aluSapAGIngQosQStatsUncoloredPacketsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored packets offered to the ingress." ::= { aluSapAGIngQosQStatsEntry 15 } aluSapAGIngQosQStatsUncoloredOctetsOffered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncolored octets offered to the ingress." ::= { aluSapAGIngQosQStatsEntry 16 } ---------------------------------------------------------- -- Egress QoS Queue SAP Aggregation Group Statistics Table ---------------------------------------------------------- aluSapAGEgrQosQStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapAGEgrQosQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains egress QoS queue SAP Aggregation Group statistics." ::= { aluServiceObjs 10 } aluSapAGEgrQosQStatsEntry OBJECT-TYPE SYNTAX AluSapAGEgrQosQStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Egress statistics about a specific SAP Aggregation Group's QoS queue." INDEX { svcId, aeSvcSapAGName, aluSapAGEgrQosQueueId } ::= { aluSapAGEgrQosQStatsTable 1 } AluSapAGEgrQosQStatsEntry ::= SEQUENCE { aluSapAGEgrQosQueueId TSapEgrQueueId, aluSapAGEgrQosQStatsForwardedInProfPackets Counter64, aluSapAGEgrQosQStatsDroppedInProfPackets Counter64, aluSapAGEgrQosQStatsForwardedOutProfPackets Counter64, aluSapAGEgrQosQStatsDroppedOutProfPackets Counter64, aluSapAGEgrQosQStatsForwardedInProfOctets Counter64, aluSapAGEgrQosQStatsDroppedInProfOctets Counter64, aluSapAGEgrQosQStatsForwardedOutProfOctets Counter64, aluSapAGEgrQosQStatsDroppedOutProfOctets Counter64, aluSapAGEgrQosCustId TmnxCustId } aluSapAGEgrQosQueueId OBJECT-TYPE SYNTAX TSapEgrQueueId MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the egress QoS queue of this SAP Aggregation Group." ::= { aluSapAGEgrQosQStatsEntry 1 } aluSapAGEgrQosQStatsForwardedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded." ::= { aluSapAGEgrQosQStatsEntry 2 } aluSapAGEgrQosQStatsDroppedInProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGEgrQosQStatsEntry 3 } aluSapAGEgrQosQStatsForwardedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets (rate below CIR) forwarded." ::= { aluSapAGEgrQosQStatsEntry 4 } aluSapAGEgrQosQStatsDroppedOutProfPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile packets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGEgrQosQStatsEntry 5 } aluSapAGEgrQosQStatsForwardedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets (rate below CIR) forwarded." ::= { aluSapAGEgrQosQStatsEntry 6 } aluSapAGEgrQosQStatsDroppedInProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of in-profile octets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGEgrQosQStatsEntry 7 } aluSapAGEgrQosQStatsForwardedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets (rate below CIR) forwarded." ::= { aluSapAGEgrQosQStatsEntry 8 } aluSapAGEgrQosQStatsDroppedOutProfOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of out-of-profile octets discarded due to: MBS exceeded, buffer pool limit exceeded, etc." ::= { aluSapAGEgrQosQStatsEntry 9 } aluSapAGEgrQosCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "The Customer ID for the associated service." ::= { aluSapAGEgrQosQStatsEntry 10 } ---------------------------------------------------------- -- Base SAP ETH-CFM Table ---------------------------------------------------------- aluSapEthCfmTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapEthCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAP Ethernet CFM Group." ::= { aluServiceObjs 11 } aluSapEthCfmEntry OBJECT-TYPE SYNTAX AluSapEthCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet DFM Information specific to a SSAP" AUGMENTS { sapEthernetInfoEntry } ::= { aluSapEthCfmTable 1 } AluSapEthCfmEntry ::= SEQUENCE { aluSapEthCfmHoldMepUp TruthValue } aluSapEthCfmHoldMepUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MEPs on this SAP on failure of port link. aluSapEthCfmHoldMepUp can only be enabled on one SAP per EPIPE service." DEFVAL { false } ::= { aluSapEthCfmEntry 1 } -- -- Nokia 7705 SAR series Extended EPIPE SAP Table -- aluSapEpipeInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapEpipeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains EPIPE specific SAP information for 7705 series routers." ::= { aluServiceObjs 12 } aluSapEpipeInfoEntry OBJECT-TYPE SYNTAX AluSapEpipeInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "EPIPE specific information about a SAP." INDEX { svcId, sapPortId, sapEncapValue } ::= { aluSapEpipeInfoTable 1 } AluSapEpipeInfoEntry ::= SEQUENCE { aluSapEpipeMwCompression TruthValue, aluSapEpipeMwDestMacAddress MacAddress, aluSapEpipeMwSrcMacAddress MacAddress, aluSapEpipeMwCompressRTP TruthValue } aluSapEpipeMwCompression OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluSapEpipeMwCompression specifies whether or not a SAP on a Microwave Link has radio compression enabled." DEFVAL { false } ::= { aluSapEpipeInfoEntry 1 } aluSapEpipeMwDestMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluSapEpipeMwDestMacAddress specifies the destination MAC address to be used during compression on a microwave link. This object can only be set when compression is enabled." DEFVAL { '000000000000'h } ::= { aluSapEpipeInfoEntry 2 } aluSapEpipeMwSrcMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluSapEpipeMwSrcMacAddress specifies the source MAC address to be used during compression on a microwave link. This object can only be set when compression is enabled." DEFVAL { '000000000000'h } ::= { aluSapEpipeInfoEntry 3 } aluSapEpipeMwCompressRTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluSapEpipeMwCompression specifies whether or not RTP is enabled on a Microwave Link SAP when radio compression is enabled enabled." DEFVAL { false } ::= { aluSapEpipeInfoEntry 4 } -- -- Nokia 7705 SAR series Extended sapBaseInfoTable -- AluSapSchedulerMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Scheduler Mode to use for a SAP. four-priority - Expedited/Best-Effort plus in/out scheduling. sixteen-priority - Straight Priority CIR/EIR scheduling." SYNTAX INTEGER { four-priority (1), sixteen-priority (2) } aluSapBaseInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains SAP Base Information for 7705 series routers." ::= { aluServiceObjs 13 } aluSapBaseInfoEntry OBJECT-TYPE SYNTAX AluSapBaseInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a SAP." AUGMENTS { sapBaseInfoEntry } ::= { aluSapBaseInfoTable 1 } AluSapBaseInfoEntry ::= SEQUENCE { aluSapIngressSchedulerMode AluSapSchedulerMode, aluSapEgressSchedulerMode AluSapSchedulerMode, aluSapIngressAggCir AluSapSchedulerCir, aluSapEgressAggCir AluSapSchedulerCir, aluSapIngressAggRateLimit Integer32, aluSapEgressAggRateLimit Integer32, aluSapIngressShaperGroup TNamedItemOrEmpty, aluSapEgressShaperGroup TNamedItemOrEmpty, aluSapIngressAggCirPercent Unsigned32 , aluSapEgressAggCirPercent Unsigned32 , aluSapIngressAggRatePercent Unsigned32, aluSapEgressAggRatePercent Unsigned32, aluSapIngressAggRateType TBWRateType, aluSapEgressAggRateType TBWRateType } aluSapIngressSchedulerMode OBJECT-TYPE SYNTAX AluSapSchedulerMode MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSapIngressSchedulerMode indicates the mode that the ingress scheduler is provisioned for this SAP to operate in. All MDAs are initialized with a valid aluSapIngressSchedulerMode, however it can be modified on SAPs on some MDA types, but not on all MDA types. aluSapIngressSchedulerMode intitialized with 'four-priority-hqos' cannot be modified. When set aluSapIngressSchedulerMode to four-priority, aluSapEgressAggCir and sapIngressAggRateLimit of the same SAP are reverted to their default values." DEFVAL { four-priority } ::= { aluSapBaseInfoEntry 1 } aluSapEgressSchedulerMode OBJECT-TYPE SYNTAX AluSapSchedulerMode MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSapEgressSchedulerMode indicates the mode that the egress scheduler is provisioned for this SAP to operate in. All MDAs are initialized with a valid aluSapEgressSchedulerMode, however it can be modified on SAPs on some MDA types, but not on all MDA types. aluSapEgressSchedulerMode intitialized with 'four-priority-hqos' cannot be modified. When set aluSapEgressSchedulerMode to four-priority, aluSapEgressAggCir and sapEgressAggRateLimit of the same SAP are reverted to their default values." DEFVAL { four-priority } ::= { aluSapBaseInfoEntry 2 } aluSapIngressAggCir OBJECT-TYPE SYNTAX AluSapSchedulerCir UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapIngressAggCir specifies the CIR of all ingress queues for this SAP. aluSapIngressAggCir cannot be modified from its default value on a SAP with aluSapIngressSchedulerMode being four-priority or four-priority-hqos." DEFVAL { 0 } ::= { aluSapBaseInfoEntry 3 } aluSapEgressAggCir OBJECT-TYPE SYNTAX AluSapSchedulerCir UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapEgressAggCir specifies the CIR of all egress queues for this SAP. aluSapEgressAggCir cannot be modified from its default value on a SAP with aluSapEgressSchedulerMode being four-priority or four-priority-hqos." DEFVAL { 0 } ::= { aluSapBaseInfoEntry 4 } aluSapIngressAggRateLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 1..10000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapIngressAggRateLimit specifies the maximum total rate of all ingress queues for this SAP. The value '-1' means that there is no limit. aluSapIngressAggRateLimit cannot be modified from its default value on a SAP with aluSapIngressSchedulerMode being four-priority." DEFVAL { -1 } ::= { aluSapBaseInfoEntry 5 } aluSapEgressAggRateLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 1..10000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapEgressAggRateLimit specifies the maximum total rate of all egress queues for this SAP. The value '-1' means that there is no limit. aluSapEgressAggRateLimit cannot be modified from its default value on a SAP with aluSapEgressSchedulerMode being four-priority." DEFVAL { -1 } ::= { aluSapBaseInfoEntry 6 } aluSapIngressShaperGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "aluSapIngressShaperGroup is one of the shaper groups defined within the shaper policy associated with the access ingress MDA object aluExtTmnxMDAAccessIngShaperPolicy. If aluExtTmnxMDAAccessIngShaperPolicy of the MDA is a an empty string or aluSapIngressSchedulerMode of the SAP is four-priority, a luSapIngressShaperGroup is set to empty string and it cannot be modified." DEFVAL { ''H } -- the empty string ::= { aluSapBaseInfoEntry 7 } aluSapEgressShaperGroup OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "aluSapEgressShaperGroup is one of the shaper groups defined within the shaper policy associated with the access egress port object aluExtPortEtherAccEgrShaper. If aluExtPortEtherAccEgrShaper is a an empty string or aluSapEgressSchedulerMode of the SAP is four-priority, aluSapEgressShaperGroup is set to empty string and it cannot be modified." DEFVAL { ''H } -- the empty string ::= { aluSapBaseInfoEntry 8 } aluSapIngressAggCirPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if aluSapIngressAggCirPercent is set to non-default value when the object aluSapIngressAggRateType is set to 'kbps'." DEFVAL { 0 } ::= { aluSapBaseInfoEntry 9 } aluSapEgressAggCirPercent OBJECT-TYPE SYNTAX Unsigned32 (0..10000) UNITS "hundredths of a percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if aluSapEgressAggCirPercent is set to non-default value when the object aluSapEgressAggRateType is set to 'kbps'." DEFVAL { 0 } ::= { aluSapBaseInfoEntry 10 } aluSapIngressAggRatePercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if aluSapIngressAggRatePercent is set to non-default value when the object aluSapIngressAggRateType is set to 'kbps'." DEFVAL { 10000 } ::= { aluSapBaseInfoEntry 11 } aluSapEgressAggRatePercent OBJECT-TYPE SYNTAX Unsigned32 (1..10000) UNITS "hundredths of a percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if aluSapEgressAggRatePercent is set to non-default value when the object aluSapEgressAggRateType is set to 'kbps'." DEFVAL { 10000 } ::= { aluSapBaseInfoEntry 12 } aluSapIngressAggRateType OBJECT-TYPE SYNTAX TBWRateType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSapIngressAggRateType specifies the type of sap ingress aggregate-rate. When the value of aluSapIngressAggRateType is set to 'kbps', the ingress aggregate rates are specified in kbps using values of aluSapIngressAggRateLimit and aluSapIngressAggCir, while ojects aluSapIngressAggCirPercent and aluSapIngressAggRatePercent will be set to their default values. When the value of aluSapIngressAggRateType is set to either 'percentPortLimit' or 'percentLocalLimit', the ingress aggregate rates are specified in percentage using values of aluSapIngressAggRatePercent and aluSapIngressAggCirPercent, while objects aluSapIngressAggCir and aluSapIngressAggRate will be set to their default values." DEFVAL { kbps } ::= { aluSapBaseInfoEntry 13 } aluSapEgressAggRateType OBJECT-TYPE SYNTAX TBWRateType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSapEgressAggRateType specifies the type of sap egress aggregate-rate. When the value of aluSapEgressAggRateType is set to 'kbps', the egress aggregate rates are specified in kbps, using values of aluSapEgressAggRateLimit and aluSapEgressAggCir, while objects aluSapEgressAggCirPercent and aluSapEgressAggRatePercent will be set to their default values. When the value of aluSapEgressAggRateType is set to either 'percentPortLimit' or 'percentLocalLimit', the egress aggregate rates are specified in percentage using values of aluSapEgressAggRatePercent and aluSapEgressAggCirPercent, while objects aluSapEgressAggCir and aluSapEgressAggRate will be set to their default values." DEFVAL { kbps } ::= { aluSapBaseInfoEntry 14 } -- -- Nokia 7705 SAR series Extended sapEthLoopbackTable -- aluSapEthLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapEthLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains testhead SAP Loopback Information for 7705 series routers." ::= { aluServiceObjs 14 } aluSapEthLoopbackEntry OBJECT-TYPE SYNTAX AluSapEthLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a testhead Loopback SAP." AUGMENTS { sapEthLoopbackEntry } ::= { aluSapEthLoopbackTable 1 } AluSapEthLoopbackEntry ::= SEQUENCE { aluSapEthLoopback INTEGER, aluSapEthLoopbackDuration Unsigned32, aluSapEthLoopbackPersistent INTEGER, aluSapEthLoopbackTimeLeft Unsigned32, aluSapEthLoopbackMode INTEGER, aluSapEthLoopbackMacSwap TmnxEnabledDisabled } aluSapEthLoopback OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "aluSapEthLoopback is used to specify if the sap is set into a loopback mode for testhead purpose. if true, either aluSapEthLoopbackDuration or aluSapEthLoopbackPersistent has to be set at the same time." DEFVAL { false } ::= { aluSapEthLoopbackEntry 1 } aluSapEthLoopbackDuration OBJECT-TYPE SYNTAX Unsigned32 (0|30..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "aluSapEthLoopbackDuration is used to specify the time duration, in seconds, to set the sap into a testhead loopback mode. Setting aluSapEthLoopbackDuration to a non-zero value must be accompanied by setting aluSapEthLoopback to 'true' for the same sap. When this timer expires, it will be reset to the default value 0 by the system. Set aluSapEthLoopbackDuration to 0 to keep the loopback mode until modified by the operator." DEFVAL { 0 } ::= { aluSapEthLoopbackEntry 2 } aluSapEthLoopbackPersistent OBJECT-TYPE SYNTAX INTEGER { false (0), true (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "aluSapEthLoopbackPersistent is used to specify if the sap loopback configuration should be saved. if true, save the config. When aluSapEthLoopbackPersistent is set to 'true', aluSapEthLoopbackDuration CAN NOT be set to a non-zero value." DEFVAL { false } ::= { aluSapEthLoopbackEntry 3 } aluSapEthLoopbackTimeLeft OBJECT-TYPE SYNTAX Unsigned32 (0..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "aluSapEthLoopbackTimeLeft is used to specify the number of seconds left since the loopback has started. 0 if aluSapEthLoopbackTimeLeft as assigned 0, or when aluSapEthLoopback is 'false'." ::= { aluSapEthLoopbackEntry 4 } aluSapEthLoopbackMode OBJECT-TYPE SYNTAX INTEGER { line (1), internal (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapEthLoopbackMode specifies how traffic will be reflected. If the value is set to 'line(1)', traffic arriving at the SAP ingress will be reflected back out the same SAP. If the value is set to 'internal(2)', traffic arriving at the SAP egress will be reflected back into the service in the direction of the original source." ::= { aluSapEthLoopbackEntry 5 } aluSapEthLoopbackMacSwap OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapEthLoopbackMacSwap specifies the enabling or disabling of source address and destination address swapping for the reflected packets when the arriving packet is unicast. With aluSapEthLoopbackMacSwap enabled, any broadcast or multicast packets arriving on a looped point will be dropped." DEFVAL { disabled } ::= { aluSapEthLoopbackEntry 6 } aluSapCemInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapCemInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extend table that contains sar7705 specific CEM SAP information." ::= { aluServiceObjs 15 } aluSapCemInfoEntry OBJECT-TYPE SYNTAX AluSapCemInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional SAR Information about a specific CEM SAP." AUGMENTS { sapCemInfoEntry } ::= { aluSapCemInfoTable 1 } AluSapCemInfoEntry ::= SEQUENCE { aluSapCemAsymDelayEnable TmnxEnabledDisabled, aluSapCemAsymDelaySamples INTEGER, aluSapCemAsymDelayRepeatPeriod INTEGER, aluSapCemSerialRate Unsigned32, aluSapCemOnDemandADC TmnxActionType } aluSapCemAsymDelayEnable OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapCemAsymDelayEnable specifies the enabling or disabling of the asymetric delay control. " DEFVAL { disabled } ::= { aluSapCemInfoEntry 1 } aluSapCemAsymDelaySamples OBJECT-TYPE SYNTAX INTEGER { one (1), two (2), four (4), eight (8), sixteen (16), thirtytwo (32) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapCemAsymDelaySamples specifies the number of packets being sampled during the sampling period when asymetric delay control is enabled. one, two, four or eight corresponds to 1024, 2048, 2096 or 8192 samples " DEFVAL { sixteen } ::= { aluSapCemInfoEntry 2 } aluSapCemAsymDelayRepeatPeriod OBJECT-TYPE SYNTAX INTEGER (0 | 1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluSapCemAsymDelayRepeatPeriod specifies the sampling/adjusting period in minutes when the asymetric delay control is enabled. value zero disables the periodic sampling" DEFVAL { 60 } ::= { aluSapCemInfoEntry 3 } aluSapCemSerialRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluSapCemSerialRate indicates the bit-rate of the 'unstructuredSerial' CEM SAP." ::= { aluSapCemInfoEntry 4 } aluSapCemOnDemandADC OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSapCemOnDemandADC, when set to 'doAction(1)', triggers on demand ADC." DEFVAL { notApplicable } ::= { aluSapCemInfoEntry 5 } aluSapCemStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSapCemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extend table that contains sar7705 specific CEM SAP stats." ::= { aluServiceObjs 16 } aluSapCemStatsEntry OBJECT-TYPE SYNTAX AluSapCemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional SAR Stats for a specific CEM SAP." AUGMENTS { sapCemStatsEntry } ::= { aluSapCemStatsTable 1 } AluSapCemStatsEntry ::= SEQUENCE { aluSapCemStatsEgressSamplingDoneCnt Counter32, aluSapCemStatsEgressAdjustDoneCnt Counter32 } aluSapCemStatsEgressSamplingDoneCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluSapCemStatsEgressSamplingDoneCnt indicates the number of times sampling is done for asym delay control." ::= { aluSapCemStatsEntry 1 } aluSapCemStatsEgressAdjustDoneCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluSapCemStatsEgressAdjustDoneCnt indicates the number of times adjustment is done for asym delay control." ::= { aluSapCemStatsEntry 2 } -- -- Nokia 7705 SAR series Extended Base SDP Binding Statistics Table -- aluSdpBindStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSdpBindStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extended table that contains 7705 SAR specific SDP Binding stats." ::= { aluServiceObjs 17 } aluSdpBindStatsEntry OBJECT-TYPE SYNTAX AluSdpBindStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional 7705 SAR stats for a specific SDP Binding." AUGMENTS { sdpBindBaseStatsEntry } ::= { aluSdpBindStatsTable 1 } AluSdpBindStatsEntry ::= SEQUENCE { aluSdpBindBaseStatsEgressDroppedPackets Counter64 } aluSdpBindBaseStatsEgressDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluSdpBindBaseStatsEgressDroppedPackets indicates the number of packets dropped egressing the sdp binding." ::= { aluSdpBindStatsEntry 1 } -- -- Nokia 7705 SAR serises Extended Base Epipe svc Table -- aluSvcEpipeTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSvcEpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The extended svcEpipeTable contains objects related to 'epipe' services. Entries are created and destroyed when 'epipe' services are created and destroyed by the system." ::= { aluServiceObjs 18} aluSvcEpipeEntry OBJECT-TYPE SYNTAX AluSvcEpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extension of svcEpipeEntry, each row entry contains objects that allows the modification of the 'epipe' specific objects." AUGMENTS { svcEpipeEntry } ::= { aluSvcEpipeTable 1 } AluSvcEpipeEntry ::= SEQUENCE { aluSvcEpipeTeidHashing TmnxEnabledDisabled, aluSvcEpipeL4Hashing TmnxEnabledDisabled } aluSvcEpipeTeidHashing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSvcEpipeTeidHashing specifies service-level teid hashing for Ethernet services." DEFVAL { disabled } ::= { aluSvcEpipeEntry 1 } aluSvcEpipeL4Hashing OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluSvcEpipeL4Hashing specifies service-level L4 hashing for Ethernet services." DEFVAL { disabled } ::= { aluSvcEpipeEntry 2 } -- -- Nokia 7705 SAR series Extended CPIPE SDP Bind Table -- aeSdpBindCpipeTable OBJECT-TYPE SYNTAX SEQUENCE OF AeSdpBindCpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The extended table sdpBindCpipeTable contains 7705 SAR specific objects related to a cpipe SDP Bind. A row will exist in this table for each cpipe sdpBind configured on this system. Rows are created and deleted automatically by the system." ::= { aluServiceObjs 19 } aeSdpBindCpipeEntry OBJECT-TYPE SYNTAX AeSdpBindCpipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional 7705 SAR objects related to a cpipe SDP Bind." AUGMENTS { sdpBindCpipeEntry } ::= { aeSdpBindCpipeTable 1 } AeSdpBindCpipeEntry ::= SEQUENCE { aeSdpBindCpipeLocalAsymDelay TmnxEnabledDisabled, aeSdpBindCpipePeerAsymDelay TmnxEnabledDisabled, aeSdpBindCpipeLocalJitterBuffer Unsigned32, aeSdpBindCpipePeerJitterBuffer Unsigned32, aeSdpBindCpipeLocalSerialRate Unsigned32, aeSdpBindCpipePeerSerialRate Unsigned32 } aeSdpBindCpipeLocalAsymDelay OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aeSdpBindCpipeLocalAsymDelay indicates whether Asymmetic Delay Control (ADC) is enabled locally. This value is transmitted to the remote peer." ::= { aeSdpBindCpipeEntry 1 } aeSdpBindCpipePeerAsymDelay OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aeSdpBindCpipePeerAsymDelay indicates whether Asymmetic Delay Control (ADC) is enabled remotely. This value is received from the remote peer. If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be 'disabled'." ::= { aeSdpBindCpipeEntry 2 } aeSdpBindCpipeLocalJitterBuffer OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the local jitter buffer size in milliseconds (ms)." ::= { aeSdpBindCpipeEntry 3 } aeSdpBindCpipePeerJitterBuffer OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aeSdpBindCpipeLocalJitterBuffer indicates the remote jitter buffer size in milliseconds (ms). If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0)." ::= { aeSdpBindCpipeEntry 4 } aeSdpBindCpipeLocalSerialRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aeSdpBindCpipeLocalSerialRate indicates the local Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s." ::= { aeSdpBindCpipeEntry 5 } aeSdpBindCpipePeerSerialRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/s" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aeSdpBindCpipePeerSerialRate indicates the remote Serial bit-rate of the 'satopSerial' cpipe SDP Bind in bits/s. If there is no remote peer, or if the label mapping has not been received, or if this value has not been received from the remote peer then this object will be zero (0)." ::= { aeSdpBindCpipeEntry 6 } -- -- Nokia 7705 SAR series Extended Base SAP Statistics Table -- aluExtSapBaseStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtSapBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains 7705 SAR specific SAP stats." ::= { aluServiceObjs 20 } aluExtSapBaseStatsEntry OBJECT-TYPE SYNTAX AluExtSapBaseStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additinal 7705 SAR stats for a specific SAP." AUGMENTS { sapBaseInfoEntry } ::= { aluExtSapBaseStatsTable 1 } AluExtSapBaseStatsEntry ::= SEQUENCE { aluExtSapBaseStatsEgressDroppedPackets Counter64 } aluExtSapBaseStatsEgressDroppedPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluExtSapBaseStatsEgressDroppedPackets indicates the number of packets dropped egressing the SAP. When sapType is ies or vprn, aluExtSapBaseStatsEgressDroppedPackets is always 0 as this stat count is not avaible on these services." ::= { aluExtSapBaseStatsEntry 1 } ---------------------------------------------------------- -- ALU Extension of SAP ETH-CFM Table ---------------------------------------------------------- aluExtSapEthCfmTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtSapEthCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An extension table that contains 7705 SAR informationn pertaining to Ethernet Connectivity Fault Management (CFM) for Service Access Points (SAPs)." ::= { aluServiceObjs 21 } aluExtSapEthCfmEntry OBJECT-TYPE SYNTAX AluExtSapEthCfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional 7705 SAR objects related to the Ethernet CFM information for a given Ethernet encapsulated SAP." AUGMENTS { sapEthCfmEntry } ::= { aluExtSapEthCfmTable 1 } AluExtSapEthCfmEntry ::= SEQUENCE { aluExtSapEthCfmHoldMepUp TruthValue } aluExtSapEthCfmHoldMepUp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MEPs on this SAP on failure of port link. aluExtSapEthCfmHoldMepUp can only be enabled on one SAP per service." DEFVAL { false } ::= { aluExtSapEthCfmEntry 1 } -- -- Conformance Information -- aluServiceMIBCompliances OBJECT IDENTIFIER ::= { aluServiceMIBConformance 1 } aluServiceMIBGroups OBJECT IDENTIFIER ::= { aluServiceMIBConformance 2 } -- compliance statements aluServiceMIBCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for revision 1.0 of ALU-SERVICE-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtSapIpipeIpcpGroup } ::= { aluServiceMIBCompliances 1 } aluServiceV3v0MIBCompliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for revision 3.0 of ALU-SERVICE-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtSapIpipeIpcpGroup, aluExtSapTlsPPPoEVsaGroup, aluExtSapTlsVlanManipulationGroup } ::= { aluServiceMIBCompliances 2 } -- aluServiceV4v0MIBCompliance MODULE-COMPLIANCE -- ::= { aluServiceMIBCompliances 3 } -- aluServiceV5v0MIBCompliance MODULE-COMPLIANCE -- ::= { aluServiceMIBCompliances 4 } -- aluServiceV6v0MIBCompliance MODULE-COMPLIANCE -- ::= { aluServiceMIBCompliances 5 } -- aluServiceV7v0MIBCompliance MODULE-COMPLIANCE -- ::= { aluServiceMIBCompliances 6 } -- aluServiceV8v0MIBCompliance MODULE-COMPLIANCE -- ::= { aluServiceMIBCompliances 7 } aluServiceV9v0MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 9.0 of ALU-SERVICE-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtSapIpipeIpcpGroup, aluExtSapTlsPPPoEVsaGroup, aluExtSapTlsVlanManipulationGroup, aluExtSapAtmTranslatedVcIdGroup, aluExtSapAGBaseInfoGroup, aluSapAGBaseStatsGroup, aluSapAGIngQosQStatsGroup, aluSapAGEgrQosQStatsGroup, aluSapEthCfmGroup, aluSapEpipeMwGroup, aluSapQosGroup, aluSapEthLoopbackGroup, aluSapCemGroup, aluSdpBindingGroup, aluSapQosGroupV7v0, aluSvcEpipeGroup, aluSapQosGroupV9v0, aluExtSdpBindCpipeGroup, aluExtSdpBindCpipeSerialGroup, aluSapCemSerialGroup, aluExtSapBaseStatsGroup } ::= { aluServiceMIBCompliances 8 } -- units of conformance aluExtSapIpipeIpcpGroup OBJECT-GROUP OBJECTS { aeSapIpipeIpcpAssignCeAddress, aeSapIpipeIpcpPriDnsAddrType, aeSapIpipeIpcpPriDnsAddr, aeSapIpipeIpcpSecDnsAddrType, aeSapIpipeIpcpSecDnsAddr } STATUS current DESCRIPTION "The group of objects to manage the IPCP capabilities of IPIPE sap on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 1 } aluExtSapTlsPPPoEVsaGroup OBJECT-GROUP OBJECTS { aeSapTlsPPPoEIncludeCircuitId, aeSapTlsPPPoECircuitId, aeSvcTlsPPPoEIncludeCircuitId } STATUS current DESCRIPTION "The group of objects to manage the PPP VSE capabilities of TLS sap on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 2 } aluExtSapTlsVlanManipulationGroup OBJECT-GROUP OBJECTS { aeSapTlsAtmSubscriberVlanTag, aeSapTlsForceCVlanForwarding } STATUS current DESCRIPTION "The group of objects to manage the vlan tag manipulation behavior of TLS saps on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 3 } aluExtSapAtmTranslatedVcIdGroup OBJECT-GROUP OBJECTS { aeSapApipeAtmVcidTranslatedVpi, aeSapApipeAtmVcidTranslatedVci } STATUS current DESCRIPTION "The group of objects includes tranlated vcid for Apipe saps in aggregation group on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 4 } aluExtSapAGBaseInfoGroup OBJECT-GROUP OBJECTS { aeSvcSapAGRowStatus, aeSvcSapAGDescription, aeSvcSapAGIngressQosPolicyId, aeSvcSapAGEgressQosPolicyId, aeSvcSapAGCollectAcctStats, aeSvcSapAGAccountingPolicyId } STATUS current DESCRIPTION "The group of objects to manage the SAP Aggregation Group Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 5 } aluSapAGBaseStatsGroup OBJECT-GROUP OBJECTS { aluSapAGBaseStatsIngressDroppedPackets, aluSapAGBaseStatsIngressDroppedOctets, aluSapAGBaseStatsIngressOfferedHiPrioPackets, aluSapAGBaseStatsIngressOfferedHiPrioOctets, aluSapAGBaseStatsIngressOfferedLoPrioPackets, aluSapAGBaseStatsIngressOfferedLoPrioOctets, aluSapAGBaseStatsIngressDroppedHiPrioPackets, aluSapAGBaseStatsIngressDroppedHiPrioOctets, aluSapAGBaseStatsIngressDroppedLoPrioPackets, aluSapAGBaseStatsIngressDroppedLoPrioOctets, aluSapAGBaseStatsIngressForwardedInProfPackets, aluSapAGBaseStatsIngressForwardedInProfOctets, aluSapAGBaseStatsIngressForwardedOutProfPackets, aluSapAGBaseStatsIngressForwardedOutProfOctets, aluSapAGBaseStatsEgressDroppedInProfPackets, aluSapAGBaseStatsEgressDroppedInProfOctets, aluSapAGBaseStatsEgressDroppedOutProfPackets, aluSapAGBaseStatsEgressDroppedOutProfOctets, aluSapAGBaseStatsEgressForwardedInProfPackets, aluSapAGBaseStatsEgressForwardedInProfOctets, aluSapAGBaseStatsEgressForwardedOutProfPackets, aluSapAGBaseStatsEgressForwardedOutProfOctets, aluSapAGBaseStatsUnknownVpiVciCellsDropped, aluSapAGBaseStatsCustId, aluSapAGBaseStatsIngressOfferedUncoloredPackets, aluSapAGBaseStatsIngressOfferedUncoloredOctets, aluSapAGBaseStatsAuthenticationPktsDiscarded, aluSapAGBaseStatsAuthenticationPktsSuccess, aluSapAGBaseStatsLastClearedTime } STATUS current DESCRIPTION "The group of objects for statistics of SAP Aggregation Group on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 6 } aluSapAGIngQosQStatsGroup OBJECT-GROUP OBJECTS { aluSapAGIngQosQueueId, aluSapAGIngQosQStatsOfferedHiPrioPackets, aluSapAGIngQosQStatsDroppedHiPrioPackets, aluSapAGIngQosQStatsOfferedLoPrioPackets, aluSapAGIngQosQStatsDroppedLoPrioPackets, aluSapAGIngQosQStatsOfferedHiPrioOctets, aluSapAGIngQosQStatsDroppedHiPrioOctets, aluSapAGIngQosQStatsOfferedLoPrioOctets, aluSapAGIngQosQStatsDroppedLoPrioOctets, aluSapAGIngQosQStatsForwardedInProfPackets, aluSapAGIngQosQStatsForwardedOutProfPackets, aluSapAGIngQosQStatsForwardedInProfOctets, aluSapAGIngQosQStatsForwardedOutProfOctets, aluSapAGIngQosCustId, aluSapAGIngQosQStatsUncoloredPacketsOffered, aluSapAGIngQosQStatsUncoloredOctetsOffered } STATUS current DESCRIPTION "The group of objects for statistics of ingress QoS Queue of Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 7 } aluSapAGEgrQosQStatsGroup OBJECT-GROUP OBJECTS { aluSapAGEgrQosQueueId, aluSapAGEgrQosQStatsForwardedInProfPackets, aluSapAGEgrQosQStatsDroppedInProfPackets, aluSapAGEgrQosQStatsForwardedOutProfPackets, aluSapAGEgrQosQStatsDroppedOutProfPackets, aluSapAGEgrQosQStatsForwardedInProfOctets, aluSapAGEgrQosQStatsDroppedInProfOctets, aluSapAGEgrQosQStatsForwardedOutProfOctets, aluSapAGEgrQosQStatsDroppedOutProfOctets, aluSapAGEgrQosCustId } STATUS current DESCRIPTION "The group of objects for statistics of egress QoS Queue of Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 8 } aluSapEthCfmGroup OBJECT-GROUP OBJECTS { aluSapEthCfmHoldMepUp } STATUS current DESCRIPTION "The group of objects supporting Ethernet Connectivity Fault Management (CFM) for the SAP feature on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 9 } aluSapEpipeMwGroup OBJECT-GROUP OBJECTS { aluSapEpipeMwCompression, aluSapEpipeMwDestMacAddress, aluSapEpipeMwSrcMacAddress, aluSapEpipeMwCompressRTP } STATUS current DESCRIPTION "The group of objects supporting EPIPE Microwave compression on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 10 } aluSapQosGroup OBJECT-GROUP OBJECTS { aluSapIngressSchedulerMode, aluSapIngressAggCir, aluSapEgressSchedulerMode, aluSapEgressAggCir, aluSapIngressAggRateLimit, aluSapEgressAggRateLimit } STATUS current DESCRIPTION "The group of objects supporting qos ingress/egress for SAPs on the Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 11 } aluSapEthLoopbackGroup OBJECT-GROUP OBJECTS { aluSapEthLoopback, aluSapEthLoopbackDuration, aluSapEthLoopbackPersistent, aluSapEthLoopbackTimeLeft, aluSapEthLoopbackMode, aluSapEthLoopbackMacSwap } STATUS current DESCRIPTION "The group of objects supporting testhead sap loopback for SAPs on the Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 12 } aluSapCemGroup OBJECT-GROUP OBJECTS { aluSapCemAsymDelayEnable, aluSapCemAsymDelaySamples, aluSapCemAsymDelayRepeatPeriod, aluSapCemStatsEgressSamplingDoneCnt, aluSapCemStatsEgressAdjustDoneCnt } STATUS current DESCRIPTION "The group of objects supporting asymetric delay for CEM SAPs on the Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 13 } aluSdpBindingGroup OBJECT-GROUP OBJECTS { aluSdpBindBaseStatsEgressDroppedPackets } STATUS current DESCRIPTION "The group of objects supporting SDP Binding on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 14 } aluSapQosGroupV7v0 OBJECT-GROUP OBJECTS { aluSapIngressShaperGroup, aluSapEgressShaperGroup } STATUS current DESCRIPTION "The group of objects supporting qos ingress/egress for SAPs on the Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 15 } aluSvcEpipeGroup OBJECT-GROUP OBJECTS { aluSvcEpipeTeidHashing, aluSvcEpipeL4Hashing, aeSvcTlsL4Hashing } STATUS current DESCRIPTION "The group of objects supporting Svc Epipe on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 16 } aluSapQosGroupV9v0 OBJECT-GROUP OBJECTS { aluSapIngressAggCirPercent, aluSapEgressAggCirPercent, aluSapIngressAggRatePercent, aluSapEgressAggRatePercent, aluSapIngressAggRateType, aluSapEgressAggRateType } STATUS current DESCRIPTION "The group of objects supporting qos ingress/egress for SAPs in release 9.0 on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 17 } aluExtSdpBindCpipeGroup OBJECT-GROUP OBJECTS { aeSdpBindCpipeLocalAsymDelay, aeSdpBindCpipePeerAsymDelay, aeSdpBindCpipeLocalJitterBuffer, aeSdpBindCpipePeerJitterBuffer } STATUS current DESCRIPTION "The group of objects supporting cpipe SDP Bindings on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 18 } aluExtSdpBindCpipeSerialGroup OBJECT-GROUP OBJECTS { aeSdpBindCpipeLocalSerialRate, aeSdpBindCpipePeerSerialRate } STATUS current DESCRIPTION "The group of objects supporting 'satopSerial' cpipe SDP Bindings on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 19 } aluSapCemSerialGroup OBJECT-GROUP OBJECTS { aluSapCemSerialRate } STATUS current DESCRIPTION "The group of objects supporting 'unstructuredSerial' CEM SAPs on the Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 20 } aluExtSapBaseStatsGroup OBJECT-GROUP OBJECTS { aluExtSapBaseStatsEgressDroppedPackets } STATUS current DESCRIPTION "The group of objects supporting SDP Binding on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 21 } aluExtSapEthCfmGroup OBJECT-GROUP OBJECTS { aluExtSapEthCfmHoldMepUp } STATUS current DESCRIPTION "The group of objects supporting Ethernet Connectivity Fault Management (CFM) features for SAPs on Nokia 7705 SAR series systems." ::= { aluServiceMIBGroups 22 } END