ALU-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter64, Unsigned32, Integer32, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TimeStamp, TruthValue, RowStatus, DateAndTime, DisplayString FROM SNMPv2-TC TNamedItemOrEmpty, TmnxActionType, TItemLongDescription, TQueueId, TmnxPortID, TmnxEnabledDisabled FROM TIMETRA-TC-MIB tmnxDS1PortEntry, tmnxPortPortID, tmnxPortEtherEntry, tmnxDS0ChanGroupEntry, tmnxPortNotifyPortId, tmnxDS1Entry, TmnxDs0ChannelList, TmnxDSXIdleFillType, TmnxDSXIdleCycleFlags, TmnxDSXClockSource, tmnxPortCemStatsEntry, tmnxFrIntfEntry, tmnxPortEntry FROM TIMETRA-PORT-MIB tmnxChassisIndex FROM TIMETRA-CHASSIS-MIB aluSARMIBModules FROM ALU-SAR-GLOBAL-MIB aluHwObjs, aluHwConformance, aluHwNotification FROM ALU-CHASSIS-MIB frCircuitEntry FROM FRAME-RELAY-DTE-MIB pethPsePortEntry, pethPsePortPowerClassifications, pethPsePortDetectionStatus FROM POWER-ETHERNET-MIB dot1xPaePortNumber FROM IEEE8021-PAE-MIB ; aluPortMIBModule MODULE-IDENTITY LAST-UPDATED "0809100000Z" ORGANIZATION "Nokia" CONTACT-INFO "Nokia 7x50 Support Web: http://www.nokia.com/comps/pages/carrier_support.jhtml" DESCRIPTION "This document is the SNMP MIB module to manage and provision the hardware components of the Nokia 7x50 device. Copyright 2003-2015 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "0801090000Z" DESCRIPTION "Rev 1.0 09 Jan 2008 00:00 1.0 release of the ALU-PORT-MIB." REVISION "0809100000Z" -- 10 Sept 2008 00:00 DESCRIPTION "Rev 1.1.2 for 2.0 release of the ALU-PORT-MIB. 1) synchonous ethernet support 2) tdm port ACR statistics" ::= { aluSARMIBModules 2 } aluPortObjs OBJECT IDENTIFIER ::= { aluHwObjs 4 } aluPortNotifyPrefix OBJECT IDENTIFIER ::= { aluHwNotification 2} aluPortNotification OBJECT IDENTIFIER ::= { aluPortNotifyPrefix 0 } aluPortNotificationObjects OBJECT IDENTIFIER ::= { aluHwObjs 7 } aluPortStatsObjs OBJECT IDENTIFIER ::= { aluHwObjs 12 } aluPortConformance OBJECT IDENTIFIER ::= { aluHwConformance 4 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- ALU-PORT-MIB textual conventions -- -- -- AluRS232ReportStatus -- AluRS232ReportStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The AluRS232ReportStatus is a bitmask that describes alarms that can be raised/cleared on a Serial Port: hcmOof - local HCM out-of-frame errors hcmRai - remote HCM alarm indication ctrlLeadMon - control lead monitoring is forcing link down monClockDev - monitoring of clock deviation is forcing link down monDataInac - monitoring of data inactivity is forcing link down " SYNTAX BITS { notUsed (0), hcmOof (1), hcmRai (2), ctrlLeadMon (3), monClockDev (4), monDataInac (5) } -- -- AluRS232ControlLead -- AluRS232ControlLead ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The programmed setting of a Serial control lead." SYNTAX INTEGER { high (1), low (2), end-to-end (3) } -- -- AluVoicePortTlp -- AluVoicePortTlp ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "AluVoicePortTlp is a signed integer that indicates the Transmission Level Points level in tenths of decibels. " SYNTAX Integer32 (-160..70) -- -- AluVoiceSignalingLead -- AluVoiceSignalingLead ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The programmed setting of a Voice signaling lead." SYNTAX INTEGER { notApplicable (0), high (1), low (2), end-to-end (3) } -- -- AluDslTpsTcType -- AluDslTpsTcType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TPS-TC type of an Alu DSL Port or Alu DSL Line." SYNTAX INTEGER { none (0), atm (4), efm (2) } -- -- AluDslAdminState -- AluDslAdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The desired administrative status of this DSL Line." SYNTAX INTEGER { outOfService (0), inService (1) } -- -- AluDataReportStatus -- AluDataReportStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The AluDataReportStatus is a bitmask that indicates the type of alarms that can be raised/cleared on a Data Port: ais - alarm indication signal errors. los - loss of signal errors. rai - remote alarm indication events. " SYNTAX BITS { notUsed (0), ais (1), los (2), rai (3) } -- -- AluRS232ControlLeadMon -- AluRS232ControlLeadMon ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The programmed monitor setting of a Serial control lead. on - detected transitions will trigger aluRS232ControlLeadsSignalChange off - disabled; no monitoring performed high - same as 'on' and, control lead transitions to high will be treated as a port fault condition low - same as 'on' and, control lead transitions to low will be treated as a port fault condition " SYNTAX INTEGER { on (1), off (2), high (3), low (4) } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- ALU-PORT-MIB at a glance -- -- timetra (enterprises 6527) -- timetraBasedProducts (6) -- aluServiceAggrRouters (1) -- aluSARObjects (2) -- aluSARMIB (1) -- aluSARConfs (1) -- aluSARObjs (2) -- aluHwObjs (aluSARObjs 2) -- aluSARNotifyPrefix (3) -- -- aluPortObjs (aluHwObjs 4) -- aluExtTmnxDS1PortTable (1) -- aluExtTmnxPortEtherTable (2) -- aluExtTmnxDS1Table (3) -- aluRS232PortTable (4) -- aluRS232Table (5) -- aluRS232ChanGroupTable (6) -- aluVoicePortTable (7) -- aluVoiceTable (8) -- aluVoiceChanGroupTable (9) -- aluGponPortTable (10) -- aluDslPortTable (11) -- aluXdslLineTable (12) -- aluShdslLineTable (13) -- aluDataPortTable (14) -- aluDataTable (15) -- aluDataChanGroupTable (16) -- aluScadaBridgeTable (20) -- aluSerialMddbTable(21) -- aluScadaBranchTable (22) -- aluPortCfmLbVlanTable (23) -- aluGnssPortTable (24) -- -- aluPortNotificationObjects (aluHwObjs 7) -- aluPortEtherSfpESyncCompatibility (1) -- aluPortNotifyRS232AlarmReason (2) -- aluPortNotifyDataAlarmReason (3) -- -- aluPortStatsObjs (aluHwObjs 12) -- aluPortDiscardStatsTable (1) -- aluPortAcrClkStatsTable (2) -- aluPortAcrClkStatsShortIntervalTable (3) -- aluPortNetIngressControlStatsTable (4) -- aluPortNetEgressControlStatsTable (5) -- aluGponPortCurrentTable (6) -- aluGponPortPreviousTable (7) -- aluXdslLineStatsTable (8) -- aluShdslLineStatsTable (9) -- aluPortCtlStatsTable (10) -- aluFrIfStatsTable(11) -- aluExtFrCircuitTable(12) -- aluEthPtpTimestampStatsTable (13) -- aluPortNetRingAddDropStatsTable (14) -- -- -- ALU Extensions of Tmnx DS1 Port table -- aluExtTmnxDS1PortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtTmnxDS1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluExtTmnxDS1PortTable has an entry for a DS1 physical port." ::= { aluPortObjs 1 } aluExtTmnxDS1PortEntry OBJECT-TYPE SYNTAX AluExtTmnxDS1PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents extended functionality of a physical DS1 port on Nokia 7705 SAR devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxDS1PortTable are created or deleted." AUGMENTS { tmnxDS1PortEntry } ::= { aluExtTmnxDS1PortTable 1 } AluExtTmnxDS1PortEntry ::= SEQUENCE { aluExtDS1PortLineImpedance INTEGER, aluExtDS1PortLineEncoding INTEGER } aluExtDS1PortLineImpedance OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), impedance75Ohms (1), impedance100Ohms (2), impedance120Ohms (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtDS1PortLineImpedance indicates the current line impedance set on the physical T1/E1 port. T1 Ports may only be configured to have an impedance of 100 Ohms. E1 Ports may be configured to have an impledance of either 75 or 120 Ohms where the default impedance is 120 Ohms." DEFVAL { impedance100Ohms } ::= { aluExtTmnxDS1PortEntry 1 } aluExtDS1PortLineEncoding OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), b8zs (1), ami (2), hdb3 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtDS1PortLineEncoding indicates the Zero Code Suppression set on the physical T1/E1 port." DEFVAL { b8zs } ::= { aluExtTmnxDS1PortEntry 2 } aluExtTmnxPortEtherTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtTmnxPortEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluExtTmnxPortEtherTable has an entry for each Ethernet port." ::= { aluPortObjs 2 } aluExtTmnxPortEtherEntry OBJECT-TYPE SYNTAX AluExtTmnxPortEtherEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents extended functionality of a Ethernet port on Nokia 7705 SAR devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxPortEtherTable are created or deleted." AUGMENTS { tmnxPortEtherEntry } ::= { aluExtTmnxPortEtherTable 1 } AluExtTmnxPortEtherEntry ::= SEQUENCE { aluExtPortEtherSfpSyncEStatus INTEGER, aluExtPortEtherLoopback INTEGER, aluExtPortEtherLoopbackTimer Unsigned32, aluExtPortEtherLoopbackTimeLeft Unsigned32, aluExtPortEtherNwSchedulerMode INTEGER, aluExtPortEtherLoopbackCfmLbMode INTEGER, aluExtPortEtherCfmLbmRx Counter64, aluExtPortEtherCfmLbmDropped Counter64, aluExtPortEtherCfmLbrTx Counter64, aluExtPortEtherLoopbackSwapMacAddr TruthValue, aluExtPortEtherAdminPhyTxClock INTEGER, aluExtPortEtherOperPhyTxClock INTEGER, aluEthPtpTimestampCapable TruthValue, aluEthPtpTimestampEnable TruthValue, aluEthPtpAsymmetry Integer32, aluExtPortEtherLoopbackPersist TruthValue, aluPortEtherIngressRateCbs Unsigned32, aluPortEtherIngressRateSrcPause TruthValue, aluPortEtherXorMode INTEGER, aluPortEtherEgrUnshapedSapCir Integer32, aluExtPortEtherVlanFilter INTEGER, aluExtPortEtherCfmLbVlanList OCTET STRING, aluExtPortEtherAccEgrShaper TNamedItemOrEmpty, aluExtPortEtherNetEgrShaper TNamedItemOrEmpty, aluPortEtherEgrUnshapedNwIfCir Integer32, aluExtPortEtherEgrRateIncludeFCS TruthValue, aluPortEtherOperXorMode INTEGER, aluExtPortEtherBnAllowed TruthValue, aluExtPortEtherBnHoldTime Unsigned32 } -- -- Port ESync Status -- aluExtPortEtherSfpSyncEStatus OBJECT-TYPE SYNTAX INTEGER { not-applicable (0), capable (1), incapable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluExtPortEtherSfpSyncEStatus indicates whether or not the SFP installed in the port is capabable of supporting synchronous Ethernet (syncE) communications. not-applicable - The port does not support an SFP or the SFP is not installed. capable - The SFP installed in the port is capable of supporting synchronous Ethernet operations. incapable - The SFP installed in the port is incapable of supporting synchronous Ethernet operations. On MDAs that only support TIMETRA-CHASSIS::tmnxMDASynchronousEthernet with a value of 'not-applicable(0)', aluExtPortEtherSfpSyncEStatus will be 'not-applicable (0)'." DEFVAL { not-applicable } ::= { aluExtTmnxPortEtherEntry 1 } -- -- aluExtPortEtherLoopback -- aluExtPortEtherLoopback OBJECT-TYPE SYNTAX INTEGER { none (0), line (1), internal (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherLoopback is used to put an ethernet port into a loopback mode. Setting aluExtPortEtherLoopback must be accompanied by setting aluExtPortEtherLoopbackTimer for the same port. A 'line' loopback loops frames received on this port back to the remote system. An 'internal' loopback loops frames from the local system back at the framer. Use 'none' to turn off either one of the above loopback mode. The Nokia 7705 SAR devices restrict the following interactions: - A 'line' loopback is only allowed on ports with aluExtPortEtherLoopbackCfmLbMode set to 'disabled'. - An 'internal' loopback is only allowed on ports with tmnxPortMode set to 'access (1)'. - aluExtPortEtherLoopback can only be 'none' if dot3OamAdminState of the port is 'enable (2)'. - aluExtPortEtherLoopback can only be 'none' if aluExtPortEtherLoopbackCfmLbMode of the port is not 'disabled (0)'. " DEFVAL { none } ::= { aluExtTmnxPortEtherEntry 2} aluExtPortEtherLoopbackTimer OBJECT-TYPE SYNTAX Unsigned32 (0|30..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherLoopbackTimer is used to specify the time duration, in seconds, to set the ethernet port into a loopback mode. Setting aluExtPortEtherLoopbackTimer to a non-zero value must be accompanied by setting aluExtPortEtherLoopback to either 'line' or 'internal' for the same port. When this timer expires, it will be reset to the default value 0 by the system. Set aluExtPortEtherLoopbackTimer to 0 to keep the loopback mode until modified by the operator. While setting aluExtPortEtherLoopback to 'line' on a network port, aluExtPortEtherLoopbackTimer CAN NOT be set to 0. While setting aluExtPortEtherLoopback on an access port, aluExtPortEtherLoopbackTimer CAN be set to 0. While setting aluExtPortEtherLoopback to 'none', aluExtPortEtherLoopbackTimer MUST be set to 0. While setting aluExtPortEtherLoopbackPersist to 'true', aluExtPortEtherLoopbackTimer CAN NOT be set to a non-zero value." DEFVAL { 0 } ::= { aluExtTmnxPortEtherEntry 3} aluExtPortEtherLoopbackTimeLeft OBJECT-TYPE SYNTAX Unsigned32 (0..86400) MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherLoopbackTimeLeft is used to specify the number of seconds left since the loopback has started. 0 if aluExtPortEtherLoopbackTimer was assigned 0, or when aluExtPortEtherLoopback is 'none'." ::= { aluExtTmnxPortEtherEntry 4} -- -- Port Egress Scheduler Mode -- aluExtPortEtherNwSchedulerMode OBJECT-TYPE SYNTAX INTEGER { profile (0), four-priority (1), sixteen-priority (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtPortEtherNwSchedulerMode indicates the mode that the egress scheduler is provisioned to operate in. profile - Basic in/out scheduling four-priority - Expedited/Best-Effort plus in/out scheduling sixteen-priority - Straight Priority CIR/EIR scheduling The value of aluExtPortEtherNwSchedulerMode is only configurable on network ethernet ports. The port must be shutdown to modify this value. MDAs that can support sixteen-priority do not support profile or four-priority mode. Thus, when ports are created for these MDAs, aluExtPortEtherNwSchedulerMode of these ports is initialized with 'sixteen-priority'." DEFVAL { profile } ::= { aluExtTmnxPortEtherEntry 5 } aluExtPortEtherLoopbackCfmLbMode OBJECT-TYPE SYNTAX INTEGER { disabled (0), priority-low (1), priority-high (2), priority-dot1p (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherLoopbackCfmLbMode is to enable/disable an ethernet port to reply to an ethernet CFM Loopback Message (LBM) frame at the port level. If enabled then it indicates the desired egress QoS priority treatment for the CFM Loopback Reply (LBR) frame. - disabled (0) : disables the handling of LBM. - priority-low (1) : enables the handling of LBM by sending LBR using low priority QoS treatment. - priority-high (2) : enables the handling of LBM by sending LBR using high priority QoS treatment. - priority-dot1p (3) : enables the handling of LBM classification based on the Dot1p priority. LBR will be forwarded to the corresponding egress queues based on the policy configuration. When enabled, all imcoming layer 2 LBM's frames (i.e. not encapsulated within any tunnel/services), with MAC destination address matched with the port address, will be processed. An LBR will be generated, in reverse direction, back toward the sender. The LBR's contain the same content as the received LBM's, with the exception of the swapping for source and destination MAC addresses, and the CFM op code being set to indicate frame type being LBR. The Nokia 7705 SAR devices has the following restrictions: - Only one port per MDA can have the cfm-loopback enabled at a time. - aluExtPortEtherLoopbackCfmLbMode can only be 'disabled' if aluExtPortEtherLoopback is not set to 'none'. - aluExtPortEtherLoopbackCfmLbMode can not be changed from one priority to another, i.e. once it is enabled to a priority, it can only be modified to 'disabled'. - priority-dot1p is allowed only on physical ring ports. CFM LB frames destined to these physical ring ports with aluExtPortEtherLoopbackCfmLbMode being priority-dot1p will be processed and replied only if ithey have no Vlan tags, or with Vlan tags of Vlan IDs specified by aluExtPortEtherCfmLbVlanList." DEFVAL { disabled } ::= { aluExtTmnxPortEtherEntry 6} aluExtPortEtherCfmLbmRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherCfmLbmRx indicates the received number of Ethernet CFM Loopback messages (ETH-LBM) with destination MAC address matches tmnxPortMacAddress of this port, while aluExtPortEtherLoopbackCfmLbMode is enabled. aluExtPortEtherCfmLbmRx should be the sum of aluExtPortEtherCfmLbmDropped and aluExtPortEtherCfmLbrTx of the port." ::= { aluExtTmnxPortEtherEntry 7 } aluExtPortEtherCfmLbmDropped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherCfmLbmDropped indicates the number of received, but discarded Ethernet CFM Loopback messages (ETH-LBM) at this port while its aluExtPortEtherLoopbackCfmLbMode is enabled." ::= { aluExtTmnxPortEtherEntry 8 } aluExtPortEtherCfmLbrTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherCfmLbrTx indicates the number of Ethernet CFM Loopback Replies (ETH-LBR) that were sent back to the sender, in reponding to the received ETH-LBM at this port while aluExtPortEtherLoopbackCfmLbMode is enabled." ::= { aluExtTmnxPortEtherEntry 9 } aluExtPortEtherLoopbackSwapMacAddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates if Source and Destination MAC addresses in the packets are to be interchanged before being loopbacked to the sender. Setting aluExtPortEtherLoopbackSwapMacAddr must be accompanied by setting aluExtPortEtherLoopback for the same port." DEFVAL { false } ::= { aluExtTmnxPortEtherEntry 10 } aluExtPortEtherAdminPhyTxClock OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), slave (1), master (2), auto-pref-slave (3), auto-pref-master (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtPortEtherAdminPhyTxClock indicates the mode used to establish timing control of a 1000BASE-T port. The aluExtPortEtherAdminPhyTxClock is used to control the setting of register 9, bits 10-12 that are described in Table 40-3 of IEEE 802.3-2008. Register 9.12, the MASTER-SLAVE Manual Config Enable bit, is cleared when 'auto-pref-slave (3)' or 'auto-pref-master (4)' is configured. Otherwise the register 9.12 bit is set. Register 9.10 will be cleared when 'auto-pref-slave (3)' is configured and 'auto-pref-master (4)' will cause register 9.10 to be cleared. When aluExtPortEtherAdminPhyTxClock is 'slave (1)', register 9.11, the MASTER-SLAVE Manual Config Value bit, is cleared. When aluExtPortEtherAdminPhyTxClock is 'master (2)' MASTER-SLAVE Manual Config Value bit is set. For ports that cannot support 1000BASE-T, aluExtPortEtherAdminPhyTxClock will be defaulted to 'notApplicable (0)' and cannot be changed. For ports that support 1000BASE-T, setting aluExtPortEtherAdminPhyTxClock to 'notApplicable (0)' will result in aluExtPortEtherAdminPhyTxClock being set to the DEFVAL value of 'auto-pref-slave (3)'. Setting aluExtPortEtherAdminPhyTxClock on 1000BaseT microwave aware ports (ie. ports associated with ALU-MICROWAVE-PORT::aluMwRadioPortID) is allowed but it does not establish timing control of the 1000BASE-T port. The operational aspects of microwave ports with respect to timing control is described under aluExtPortEtherOperPhyTxClock" REFERENCE "IEEE Std 802.3-2008 Section 40.5" DEFVAL { auto-pref-slave } ::= { aluExtTmnxPortEtherEntry 11 } aluExtPortEtherOperPhyTxClock OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), slave (1), master (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluExtPortEtherOperPhyTxClock indicates the operational value of the MASTER-SLAVE Configuration Resolution bit of register 10 from Table 40-3 of IEEE 802.3-2008. When the bit is cleared the aluExtPortEtherOperPhyTxClock is 'slave (1)' and when the bit is set the aluExtPortEtherOperPhyTxClock is 'master (2)'. If a port is not 1000BASE-T, down or failed, aluExtPortEtherOperPhyTxClock is 'notApplicable (0)'. On 1000BaseT microwave aware ports (ie. ports associated with ALU-MICROWAVE-PORT::aluMwRadioPortID) are always 'master(2)'." REFERENCE "IEEE Std 802.3-2008 Section 40.5" ::= { aluExtTmnxPortEtherEntry 12 } aluEthPtpTimestampCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The aluEthPtpTimestampCapable indicates whether the hardware is capable of supporting 1588 PTP time stamp functions." ::= { aluExtTmnxPortEtherEntry 13 } aluEthPtpTimestampEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "the aluEthPtpTimestampEnable attribute indicate whether the port is enabled to support 1588 PTP edge time stamp functions." ::= { aluExtTmnxPortEtherEntry 14 } aluEthPtpAsymmetry OBJECT-TYPE SYNTAX Integer32 (-8388608..8388607) UNITS "nanoseconds" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "aluEthPtpAsymmetry is a path asymmetry correction value that is used to specify the difference in transmission time between master-to-slave and slave-to-master. The value can be derived from the following formula. (ingress propagation time - egress propagation time)/2. This object was made obsolete for revision 9.0 on Nokia 7705 SROS series systems; it was replaced by tmnxPortEtherPTPAsymmetry. " DEFVAL { 0 } ::= { aluExtTmnxPortEtherEntry 15} aluExtPortEtherLoopbackPersist OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this variable to 'true' indicates the configuration of aluExtPortEtherLoopback, aluExtPortEtherLoopbackPersist, aluExtPortEtherLoopbackSwapMacAddr can be saved to persist over system reboots. Setting aluExtPortEtherLoopbackPersist to 'true' can only be applied to an ethernet port in access mode, and it must be accompanied by setting aluExtPortEtherLoopback. While setting aluExtPortEtherLoopbackPersist to true, aluExtPortEtherLoopbackTimer cannot be set to a non-zero value." DEFVAL { false } ::= { aluExtTmnxPortEtherEntry 16 } aluPortEtherIngressRateCbs OBJECT-TYPE SYNTAX Unsigned32 (1..130816) UNITS "bytes" MAX-ACCESS read-write STATUS current DESCRIPTION "aluPortEtherIngressRateCbs specifies the committed burst size that hard policer can accept while complying to the ingress rate tmnxPortEtherIngressRate of the port. aluPortEtherIngressRateCbs is not applicable when tmnxPortEtherIngressRate is -1. Setting tmnxPortEtherIngressRate to -1 causes aluPortEtherIngressRateCbs of the port to revert back to its default value. aluPortEtherIngressRateCbs must be configured in multiples of 256 bytes." DEFVAL { 130816 } ::= { aluExtTmnxPortEtherEntry 17} aluPortEtherIngressRateSrcPause OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "aluPortEtherIngressRateSrcPause indicates whether to send a pause frame for every dropped packet by the hard policer when tmnxPortEtherIngressRate is > 0. aluPortEtherIngressRateSrcPause is not applicable when tmnxPortEtherIngressRate is -1. Setting tmnxPortEtherIngressRate to -1 causes aluPortEtherIngressRateSrcPause of the port to revert back to its default value." DEFVAL { false } ::= { aluExtTmnxPortEtherEntry 18} aluPortEtherXorMode OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), rj45 (1), sfp (2), rjp5 (3), auto (4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The aluPortEtherXorMode variable specifies the type of physical connector for MDA ports which support configurable connector type. aluPortEther must be 'notApplicable' if the MDA port does not support xor mode configuration." DEFVAL { rj45 } ::= { aluExtTmnxPortEtherEntry 19} aluPortEtherEgrUnshapedSapCir OBJECT-TYPE SYNTAX Integer32 (-1 | 0..10000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluPortEtherEgrUnshapedSapCir specifies the egress CIR of all unshaped SAPs, i.e. all SAPs using this port that have aluSapEgressSchedulerMode in 4-priority-mode." DEFVAL { 0 } ::= { aluExtTmnxPortEtherEntry 20 } aluExtPortEtherVlanFilter OBJECT-TYPE SYNTAX INTEGER (-1 | 1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherVlanFilter specifies the VLAN filter provisioned for bridge ethernet ports. The value -1 indicates that no VLAN filter is configured." DEFVAL { -1 } ::= { aluExtTmnxPortEtherEntry 21} aluExtPortEtherCfmLbVlanList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The aluExtPortEtherCfmLbVlanList is an OCTET STRING in which a list of Vlan Ids to be enabled for cfm Loopback when aluExtPortEtherLoopbackCfmLbMode is priority-dot1p. Any incoming CFM LB frame destined for this tmnxPortPortID will be processed if it has no vlan tags or if it has a vlan tag matched with those specified in this string aluExtPortEtherCfmLbVlanList. Either string 'none' or empty string can be use to disable cfm loopback on all vlans on the port. If aluExtPortEtherLoopbackCfmLbMode is priority-dot1p while aluExtPortEtherCfmLbVlanList is 'none' or an empty string, Any incoming CFM LB frame destined for this tmnxPortPortID will get processed and replied only if it has no Vlan tags. Acceptable characters in the string are: - numbers within the range [1..4094] , - comma (,), - hyphen (-) to indicate a range of consecutive numbers. - string 'none' Those characters can be combined using syntax below: - aluExtPortEtherCfmLbVlanList can have multiple numbers or some ranges with a comma ',' separating them with no spaces. - It's acceptable to have a same number specified more than once in the string, and this number is only counted as one vlan id toward the maximum limit of max vlan ids per port. Examples of valid strings: 1 1,2,10,4094 100-109,11,6,4-8,11 Examples of invalid strings: 1, : should not end the string with any character other than a valid number/digit. 1.5 : only a comma is accepted, a period is invalid 1, 5 : a space is not acceptable 200-220 : there are 21 vlan id's in this range, exceeded the maximum of 16 vlan ids per port." DEFVAL { ''H } -- the empty string ::= { aluExtTmnxPortEtherEntry 22 } aluExtPortEtherAccEgrShaper OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherNetEgrShaper contains the access egress shaper policy if the tmnxPortMode is hybrid. Otherwise this object has no significance." DEFVAL { ''H } -- the empty string ::= { aluExtTmnxPortEtherEntry 23 } aluExtPortEtherNetEgrShaper OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherNetEgrShaper contains the network egress shaper policy if the tmnxPortMode is hybrid. Otherwise this object has no significance." DEFVAL { ''H } -- the empty string ::= { aluExtTmnxPortEtherEntry 24 } aluPortEtherEgrUnshapedNwIfCir OBJECT-TYPE SYNTAX Integer32 (-1 | 0..10000000) UNITS "kbps" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluPortEtherEgrUnshapedNwIfCir specifies the egress CIR of all unshaped network interfaces on this port, i.e. those network interfaces on this port without a network queue policy, their aluVrtrIfNetworkEgrQueuePol is empty." DEFVAL { 0 } ::= { aluExtTmnxPortEtherEntry 25 } aluExtPortEtherEgrRateIncludeFCS OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates if the value of tmnxPortEtherEgressRate of the port includes 4 bytes of ethernet frame check sequence (FCS)." DEFVAL { false } ::= { aluExtTmnxPortEtherEntry 26 } aluPortEtherOperXorMode OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), rj45 (1), sfp (2), rjp5 (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The aluPortEtherOperXorMode specifies the type of physical connector used when MDA ports are configured as auto xor mode. aluPortEtherOperXorMode must be 'notApplicable' if the MDA port does not support xor mode configuration." ::= { aluExtTmnxPortEtherEntry 27} aluExtPortEtherBnAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The aluExtPortEtherBnAllowed allows the handling of the received ETH-BN to be processed, and possibly to enforce the bandwidth indicated in the ETH-BN by changing the egress-rate of the port. When modify aluExtPortEtherBnAllowed to 'true', aluExtPortEtherBnHoldTime is set to its default value automatically if it is not explicitly provided." DEFVAL { false } ::= { aluExtTmnxPortEtherEntry 28 } aluExtPortEtherBnHoldTime OBJECT-TYPE SYNTAX Unsigned32 (1..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtPortEtherBnHoldTime is the time interval to hold aluExtPortEtherBnEgressRateInUse when changed. This guards against excessive rate changes. aluExtPortEtherBnHoldTime is applicable only when aluExtPortEtherBnAllowed is 'true'." DEFVAL { 5 } ::= { aluExtTmnxPortEtherEntry 29 } -- -- ALU Extensions of Tmnx DS1 table -- aluExtTmnxDS1Table OBJECT-TYPE SYNTAX SEQUENCE OF AluExtTmnxDS1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluExtTmnxDS1Table has an entry for a DS1 physical port or channel." ::= { aluPortObjs 3 } aluExtTmnxDS1Entry OBJECT-TYPE SYNTAX AluExtTmnxDS1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents extended functionality of a DS1 physical port or channel on Nokia 7705 SAR devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxDS1Table are created or deleted." AUGMENTS { tmnxDS1Entry } ::= { aluExtTmnxDS1Table 1 } AluExtTmnxDS1Entry ::= SEQUENCE { aluExtDS1HoldTimeUp Unsigned32, aluExtDS1HoldTimeDown Unsigned32, aluExtDS1SignalBitsState OCTET STRING, aluExtDS1E1Ssm TruthValue, aluExtDS1E1SsmTxDus TruthValue, aluExtE1SsmSaBit Unsigned32, aluExtDs1E1TxSsmValue Unsigned32, aluExtDs1E1RxSsmValue Unsigned32 } aluExtDS1HoldTimeUp OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtDS1HoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately. Channelized SONET ports have a range of 5..100 where the default value is 5." DEFVAL { 0 } ::= { aluExtTmnxDS1Entry 1 } aluExtDS1HoldTimeDown OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "deci-seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtDS1HoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately." DEFVAL { 0 } ::= { aluExtTmnxDS1Entry 2 } aluExtDS1SignalBitsState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtDS1SignalBitsState is an array of bytes used to indicate the current state of the ABCD signalling bits for all timeslots of a DS1/E1. The first half of the array or the 32 most significant bytes describe the RX ABCD bits. The other half describes the TX ABCD bits. In each half of the array, every byte represents a particular timeslot. The most significant byte represents timeslot 1. The least significant byte represents timeslot 32. The byte arrangement is as follows: array index: | 0 1 ... 30 31 | 32 33 ... 62 63 | timeslot: | 1 2 ... 31 32 | 1 2 ... 31 32 | | <---- RX -----> | <---- TX -----> | Each byte carries ABCD bits in the least significant nibble. The byte's most significant bit indicates the validity of the ABCD bits. The bit arrangement is as follows: bit pos: | 7 6 5 4 3 2 1 0 | | V x x x A B C D | 'V' - validity (0 = invalid, 1 = valid) 'x' - don't care ABCD bits are marked invalid for a variety of situations (eg. tmnxDS1SignalMode not configured for CAS, timeslot(s) not configured as part of a channel-group, DS1/E1 status not up, etc.). For CAS DS1 SF, only the AB signalling bits are supported. The remaining 2 least significant bits in the nibble are undefined. " ::= { aluExtTmnxDS1Entry 3 } aluExtDS1E1Ssm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "aluExtDS1E1Ssm specifies whether or not Synchronous Status Messages (SSM) are enabled on the DS1/E1 port." DEFVAL { false } ::= { aluExtTmnxDS1Entry 4 } aluExtDS1E1SsmTxDus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtDS1E1SsmTxDus specifies whether or not the value 0xF (dus/dnu) is forced in the Synchronous Status Message." DEFVAL { false } ::= { aluExtTmnxDS1Entry 5 } aluExtE1SsmSaBit OBJECT-TYPE SYNTAX Unsigned32 (0|4..8) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluExtE1SsmSaBit specifies the national use bit to carry SSM Messages. This applies only to E1 interfaces. aluExtE1SsmSaBit is not supported on DS1 interfaces and cannot be written. aluExtE1SsmSaBit on DS1 interfaces shall default to '0'." DEFVAL { 8 } ::= { aluExtTmnxDS1Entry 6 } aluExtDs1E1TxSsmValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluExtDs1E1TxSsmValue indicates the Synchronous Status Message (SSM) value that is transmitted on the line. On ports that do not support SSM or for ports that do not have SSM enabled the aluExtDs1E1TxSsmValue will be '254'." REFERENCE "Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3, September 2000, 5.4.2. ITU-T Recommendation G.781, June 1999. ITU-T Recommendation G.8264, October 2008." ::= { aluExtTmnxDS1Entry 7 } aluExtDs1E1RxSsmValue OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluExtDs1E1RxSsmValue indicates the last Synchronous Status Message (SSM) value that was received by the port. On ports that do not support SSM or for ports that do not have SSM enabled the aluExtDs1E1RxSsmValue will be '254'. If ports are administratively enabled and the port is operationally out of service due to LOS, OOF or AIS the aluExtDs1E1RxSsmValue will be '255'. " REFERENCE "Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3, September 2000, 5.4.2. ITU-T Recommendation G.781, June 1999. ITU-T Recommendation G.8264, October 2008." ::= { aluExtTmnxDS1Entry 8 } -- -- ALU RS232 Port table -- aluRS232PortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluRS232PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluRS232PortTable has an entry for a physical Serial Data port." ::= { aluPortObjs 4 } aluRS232PortEntry OBJECT-TYPE SYNTAX AluRS232PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical Serial Data port on an IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a Serial Data Interface (SDI) MDA type. The aluRS232PortEntry contains attributes that are unique to the 'rs232/v35/x21/rs530' aluRS232PortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each aluRS232PortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluRS232PortTable 1 } AluRS232PortEntry ::= SEQUENCE { aluRS232PortLastChangeTime TimeStamp, aluRS232PortType INTEGER } aluRS232PortLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "aluRS232PortLastChangeTime contains the sysUpTime value of the most recently modified writable variable in the aluRS232PortEntry row for this port." ::= { aluRS232PortEntry 1 } aluRS232PortType OBJECT-TYPE SYNTAX INTEGER { rs232 (1), v35 (2), x21 (3), rs530 (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232PortType configures the interface-type of the physical port to one of the defined values, above. Regarding sdiv1 and sdiv2 (tmnxMDAAssignedType 11 and 56): Due to hardware limitations, each port in a port trio must be of the same aluRS232PortType. For example, if port 1 is configured as rs232, ports 2 and 3 must be configured as rs232. Regarding sdiv3 (tmnxMDAAssignedType 71): Due to hardware limitations, each port in a port duo must be of the same aluRS232PortType. For example, if port 1 is configured as rs232, then port 2 must be configured as rs232, too. v35, x21 and rs530 are not supported on the SAR-H and SAR-Hc systems. rs530 is not supported on sdiv1 and sdiv2." DEFVAL { rs232 } ::= { aluRS232PortEntry 2 } -- -- ALU RS232 table -- aluRS232Table OBJECT-TYPE SYNTAX SEQUENCE OF AluRS232Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "aluRS232Table has an entry for each Serial channel on each IOM card in each chassis in the system." ::= { aluPortObjs 5 } aluRS232Entry OBJECT-TYPE SYNTAX AluRS232Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Serial channel on an IOM card in a chassis in the system. Channel entries for serial ports can be created and deleted via SNMP SET operations. For each aluRS232Entry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluRS232Table 1 } AluRS232Entry ::= SEQUENCE { aluRS232RowStatus RowStatus, aluRS232LastChangeTime TimeStamp, aluRS232Type INTEGER, aluRS232DeviceMode INTEGER, aluRS232DeviceGender INTEGER, aluRS232Duplex INTEGER, aluRS232Speed INTEGER, aluRS232ClockSource INTEGER, aluRS232Loopback INTEGER, aluRS232CharacterLength INTEGER, aluRS232Parity INTEGER, aluRS232StopBits INTEGER, aluRS232ReportAlarm AluRS232ReportStatus, aluRS232ReportAlarmStatus AluRS232ReportStatus, aluRS232ControlLeadDtrDsr AluRS232ControlLead, aluRS232ControlLeadRtsDcdC AluRS232ControlLead, aluRS232ControlLeadAlbCts AluRS232ControlLead, aluRS232ControlLeadRdlRi AluRS232ControlLead, aluRS232ControlLeadDsrDtr AluRS232ControlLead, aluRS232ControlLeadDcdRtsI AluRS232ControlLead, aluRS232ControlLeadCtsAlb AluRS232ControlLead, aluRS232ControlLeadRiRdl AluRS232ControlLead, aluRS232ControlLeadsState OCTET STRING, aluRS232MultiDrop INTEGER, aluRS232SBitSignaling INTEGER, aluRS232DataPosition INTEGER, aluRS232HoldTimeUp Unsigned32, aluRS232HoldTimeDown Unsigned32, aluRS232ControlLeadsSignal OCTET STRING, aluRS232ControlLeadMonDtrDsr AluRS232ControlLeadMon, aluRS232ControlLeadMonRtsDcdC AluRS232ControlLeadMon, aluRS232ControlLeadMonAlbCts AluRS232ControlLeadMon, aluRS232ControlLeadMonRdlRi AluRS232ControlLeadMon, aluRS232ClockSyncState INTEGER, aluRS232ClockMasterPortId TmnxPortID, aluRS232InvertClock TmnxEnabledDisabled, aluRS232MonClockDeviationRaise Unsigned32, aluRS232MonClockDeviationClear Unsigned32, aluRS232MonDataInactivityRaise Unsigned32, aluRS232MonDataInactivityClear Unsigned32 } aluRS232RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232RowStatus controls the creation and deletion of row entries in the aluRS232Table. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme." ::= { aluRS232Entry 1 } aluRS232LastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "aluRS232LastChangeTime contains the sysUpTime value of the most recently modified writable variable in the aluRS232Entry row for this Serial channel." ::= { aluRS232Entry 2 } aluRS232Type OBJECT-TYPE SYNTAX INTEGER { rs232 (1), v35 (2), x21 (3), rs530 (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluRS232Type configures the interface for RS-232, V.35, X.21 or RS-530." ::= { aluRS232Entry 3 } aluRS232DeviceMode OBJECT-TYPE SYNTAX INTEGER { synchronous (1), asynchronous (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232DeviceMode configures the interface for synchronous or asynchronous operation. Changing to asynchronous results in defaulting of aluRS232CharacterLength, aluRS232Parity and aluRS232StopBits. Changing to synchronous results in defaulting of aluRS232ClockSource, aluRS232InvertClock, aluRS232MonClockDeviationRaise and aluRS232MonClockDeviationClear. Valid values depend on aluRS232Speed. synchronous is not supported on the SAR-H and SAR-Hc systems. synchronous is not valid while the sub-channel is aluRS232SocketEntry. synchronous is not allowed on rs530 while aluRS232MultiDrop is not disabled. " DEFVAL { synchronous } ::= { aluRS232Entry 4 } aluRS232DeviceGender OBJECT-TYPE SYNTAX INTEGER { dte (1), dce (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232DeviceGender configures the gender offered by the local interface. dte is not valid while the sub-channel is aluRS232SocketEntry. dte is not supported on the SAR-H and SAR-Hc systems. Regarding sdiv3 (tmnxMDAAssignedType 71): Due to hardware limitations, each Serial channel in a port duo must be of the same aluRS232DeviceGender. For example, if the channel on port 1 is configured as dte, then the channel on port 2 must be configured as dte, too. " DEFVAL { dce } ::= { aluRS232Entry 5 } aluRS232Duplex OBJECT-TYPE SYNTAX INTEGER { fullDuplex (1), halfDuplex (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232Duplex configures the duplex method of the interface to half or full duplex. full is not allowed while aluRS232MultiDrop is slave. half is not valid while the sub-channel is aluRS232SocketEntry. " DEFVAL { fullDuplex } ::= { aluRS232Entry 6 } aluRS232Speed OBJECT-TYPE SYNTAX INTEGER { speed1200 (1), speed2400 (2), speed9600 (3), speed19200 (4), speed38400 (5), speed56000 (6), speed64k (7), speed128k (8), speed256k (9), speed384k (10), speed512k (11), speed640k (12), speed768k (13), speed896k (14), speed1024k (15), speed1152k (16), speed1280k (17), speed1408k (18), speed1536k (19), speed1664k (20), speed1792k (21), speed1920k (22), speed4800 (23), speed600 (24), speed57600 (25), speed115200 (26), speed16000 (27), speed2048k (28), speed3072k (29), speed4096k (30), speed5120k (31), speed6144k (32), speed7168k (33), speed8192k (34), speed9216k (35), speed10240k (36), speed11264k (37), speed12288k (38), speed13312k (39), speed14336k (40), speed15360k (41), speed16384k (42) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232Speed specifies the link speed of the Serial interface. A value of 'speed1200' sets the link to 1200bps. A value of 'speed64k' sets the link to 64kbps. Valid values depend on tmnxMDAAssignedType : sdiv1 : 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k, 1280k, 1408k, 1536k, 1664k, 1792k, 1920k sdiv2 : 600, 1200, 2400, 4800, 9600, 19200, 38400, 56000, 57600, 115200 64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k, 1280k, 1408k, 1536k, 1664k, 1792k, 1920k sdiv3 : On the SAR-H and SAR-Hc systems, valid values are the same as sdiv2. Valid values also depend on aluRS232Type : rs232 : 600, 1200, 2400, 4800, 9600, 16000, 19200, 38400, 56000, 57600, 115200 64k (sdiv3 only) v35 : 64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k, 1280k, 1408k, 1536k, 1664k, 1792k, 1920k, 2048k x21 : 1200, 2400, 4800, 9600, 19200, 38400, 56000, 64k, 128k, 256k, 384k, 512k, 640k, 768k, 896k, 1024k, 1152k, 1280k, 1408k, 1536k, 1664k, 1792k, 1920k, 2048k rs530 : Valid values also depend on aluRS232DeviceMode : synchronous : asynchronous : 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Valid values also depend on the sub-channel: (none) : aluRS232ChanGroupEntry : aluRS232SocketEntry : High Capacity Multiplexing (HCM) is supported on aluRS232ChanGroupEntry only, running at subrate speed: hcm : 600, 1200, 2400, 4800, 9600, 16000, 19200, 38400, 56000 Valid values also depend on aluRS232ControlLeadXxx : high : low : end-to-end : Valid values also depend on aluRS232MultiDrop : disabled : slave : master : Default values depend on aluRS232Type : rs232 : 9600 v35 : 64k x21 : 64k rs530 : 64k " DEFVAL { speed9600 } ::= { aluRS232Entry 7 } aluRS232ClockSource OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), slave (1), external (2), dcrSerial (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ClockSource specifies the clock for transmitted data on a serial port. slave(1) - clock is derived from the system external(2) - clock is provided by the attached device dcrSerial(3) - clock is recovered from the differential timestamp in the RTP header but undirectional only, from attached source DCE device to attached slave DTE device aluRS232ClockSource is 'notApplicable' while aluRS232DeviceMode is asynchronous. The value 'notApplicable' is set by the system. 'external' and 'dcrSerial' are not supported on the SAR-H and SAR-Hc systems. 'external' and 'dcrSerial' are not supported on sdiv1 and sdiv2. 'external' and 'dcrSerial' are supported on rs232 and rs530 only. 'dcrSerial' is not allowed while aluRS232MultiDrop is not disabled. " DEFVAL { slave } ::= { aluRS232Entry 8 } aluRS232Loopback OBJECT-TYPE SYNTAX INTEGER { none (1), bidirB (2), bidirE (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232Loopback is used to put the port into a loopback mode. The value of tmnxPortAdminStatus should be set to outOfService in order for the loopback to be enabled. Both loopbacks are bidirectional. They reside in the same device but relative to each other, 'bidirB' is closer to the system-side. 'bidirB' is not supported while sub-channel is aluRS232SocketEntry. 'bidirB' is not supported on sdiv3. " DEFVAL { none } ::= { aluRS232Entry 9 } aluRS232CharacterLength OBJECT-TYPE SYNTAX INTEGER (6..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The aluRS232CharacterLength specifies the character length. Parameter is only valid while the port is configured for asynchronous operation. The value of aluRS232CharacterLength plus the value of aluRS232StopBits plus the number of bits needed to encode aluRS232Parity must be less than or equal to 10. Note that aluRS232Parity 'none' needs ZERO bits. " DEFVAL { 8 } ::= { aluRS232Entry 10 } aluRS232Parity OBJECT-TYPE SYNTAX INTEGER { none (1), odd (2), even (3), mark (4), space (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The aluRS232Parity specifies the parity type. Parameter is only valid while the port is configured for asynchronous operation. The value of aluRS232CharacterLength plus the value of aluRS232StopBits plus the number of bits needed to encode aluRS232Parity must be less than or equal to 10. Note that aluRS232Parity 'none' needs ZERO bits. " DEFVAL { none } ::= { aluRS232Entry 11 } aluRS232StopBits OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-create STATUS current DESCRIPTION "The aluRS232StopBits specifies the stop bits. Parameter is only valid while the port is configured for asynchronous operation. The value of aluRS232CharacterLength plus the value of aluRS232StopBits plus the number of bits needed to encode aluRS232Parity must be less than or equal to 10. Note that aluRS232Parity 'none' needs ZERO bits. " DEFVAL { 1 } ::= { aluRS232Entry 12 } aluRS232ReportAlarm OBJECT-TYPE SYNTAX AluRS232ReportStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232ReportAlarm determines when and if to generate aluEqPortRS232Alarm and aluEqPortRS232AlarmClear notifications for this port: hcmOof - Reports local HCM out-of-frame errors. hcmRai - Reports remote HCM alarm indication. ctrlLeadMon - control lead monitoring is forcing link down monClockDev - monitoring of clock deviation is forcing link down monDataInac - monitoring of data inactivity is forcing link down hcmOof and hcmRai are valid for subrate (HCM) speeds only. ctrlLeadMon, monClockDev and monDataInac are supported on sdiv3 only. monClockDev is not applicable while aluRS232DeviceMode is asynchronous. " DEFVAL { {hcmOof, hcmRai, ctrlLeadMon, monClockDev, monDataInac} } ::= { aluRS232Entry 13 } aluRS232ReportAlarmStatus OBJECT-TYPE SYNTAX AluRS232ReportStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluRS232ReportAlarmStatus indicates the alarms on this port." ::= { aluRS232Entry 14 } aluRS232ControlLeadDtrDsr OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadDtrDsr is used to configure the DTR/DSR input lead to an ASSUMED value. For RS-232, V.35 and RS-530: if local gender is DCE, lead indicates Data Terminal Ready if local gender is DTE, lead indicates Data Set Ready For X.21: lead is undefined Valid values are 'high' and 'low'." DEFVAL { high } ::= { aluRS232Entry 15 } aluRS232ControlLeadRtsDcdC OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadRtsDcdC is used to configure the RTS/DCD/C input lead to an ASSUMED value. For RS-232, V.35 and RS-530: if local gender is DCE, lead indicates Request To Send if local gender is DTE, lead indicates Data Carrier Detect For X.21: if local gender is DCE, lead indicates Control if local gender is DTE, lead indicates Indication Valid values are 'high', 'low' and 'end-to-end'. 'end-to-end' is valid only for subrate (HCM) speeds and for interface configurations compatible with 'satopSerial'." DEFVAL { high } ::= { aluRS232Entry 16 } aluRS232ControlLeadAlbCts OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadAlbCts is used to configure the ALB/CTS input lead to an ASSUMED value. For RS-232 and V.35: if local gender is DCE, lead indicates Analog loopback if local gender is DTE, lead indicates Clear To Send For X.21: lead is undefined For RS-530, AlbCts represents RlCts: if local gender is DCE, lead indicates Remote Loopback if local gender is DTE, lead indicates Clear To Send Valid values are 'high', 'low' and 'end-to-end'. This object is not supported on the SAR-H and SAR-Hc systems. 'end-to-end' is valid only for subrate (HCM) speeds and for interface configurations compatible with 'satopSerial'." DEFVAL { high } ::= { aluRS232Entry 17 } aluRS232ControlLeadRdlRi OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadRdlRi is used to configure the RDL/RI input lead to an ASSUMED value. For RS-232: if local gender is DCE, lead indicates Remote Digital Loopback if local gender is DTE, lead indicates Ring Indicator For V.35 and X.21: lead is undefined For RS-530, RdlRi represents LlTm: if local gender is DCE, lead indicates Local Loopback if local gender is DTE, lead indicates Test Mode Valid values are 'high' and 'low'. This object is not supported on the SAR-H and SAR-Hc systems." DEFVAL { high } ::= { aluRS232Entry 18 } aluRS232ControlLeadDsrDtr OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadDsrDtr is used to configure the DSR/DTR output lead to a FORCED value. For RS-232, V.35 and RS-530: if local gender is DCE, lead indicates Data Set Ready if local gender is DTE, lead indicates Data Terminal Ready For X.21: lead is undefined Valid values are 'high' and 'low'. This object is not supported on the SAR-H and SAR-Hc systems." DEFVAL { high } ::= { aluRS232Entry 19 } aluRS232ControlLeadDcdRtsI OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadDcdRtsI is used to configure the DCD/RTS/I output lead to a FORCED value. For RS-232, V.35 and RS-530: if local gender is DCE, lead indicates Data Carrier Detect if local gender is DTE, lead indicates Request To Send For X.21: if local gender is DCE, lead indicates Indication if local gender is DTE, lead indicates Control Valid values are 'high', 'low' and 'end-to-end'. 'end-to-end' is valid only for subrate (HCM) speeds and for interface configurations compatible with 'satopSerial'." DEFVAL { high } ::= { aluRS232Entry 20 } aluRS232ControlLeadCtsAlb OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadCtsAlb is used to configure the CTS/ALB output lead to a FORCED value. For RS-232 and V.35: if local gender is DCE, lead indicates Clear To Send if local gender is DTE, lead indicates Analog loopback For X.21: lead is undefined For RS-530, CtsAlb represents CtsRl: if local gender is DCE, lead indicates Clear To Send if local gender is DTE, lead indicates Remote Loopback Valid values are 'high', 'low' and 'end-to-end'. 'end-to-end' is valid only for subrate (HCM) speeds and for interface configurations compatible with 'satopSerial'." DEFVAL { high } ::= { aluRS232Entry 21 } aluRS232ControlLeadRiRdl OBJECT-TYPE SYNTAX AluRS232ControlLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadRiRdl is used to configure the RI/RDL output lead to a FORCED value. For RS-232: if local gender is DCE, lead indicates Ring Indicator if local gender is DTE, lead indicates Remote Digital Loopback For V.35 and X.21: lead is undefined For RS-530, RiRdl represents TmLl: if local gender is DCE, lead indicates Test Mode if local gender is DTE, lead indicates Local Loopback Valid values are 'high' and 'low'." DEFVAL { high } ::= { aluRS232Entry 22 } aluRS232ControlLeadsState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "aluRS232ControlLeadsState is an array of byte values used to indicate the current states of the input and output control leads. These state values are historically known as scan and drive values, respectively. These state values are the ones that get transported over the network (provided there is a means, such as HCM). As such, they are sometimes referred to as NETWORK-side values. For line-side values, see aluRS232ControlLeadsSignal. Each byte in the array represents the state of an individual control lead. The byte order is as follows: -- DtrDsr (LSB or byte0) -- RtsDcdC -- AlbCts -- RdlRi -- DsrDtr -- DcdRtsI -- CtsAlb -- RiRdl (MSB or byte7) A byte value of 1 represents on (or high as per AluRS232ControlLead). A byte value of 2 represents off (or low as per AluRS232ControlLead). All other byte values are undefined. A particular byte is undefined if its config counterpart is undefined. For example, given an X.21 interface, aluRS232ControlLeadDsrDtr is undefined thus, aluRS232ControlLeadsState byte 'DtrDsr' is also undefined. Some bytes can represent something else depending on the interface type. For example, given an RS-530, RdlRi represents LlTm. See the respective object for details (eg. aluRS232ControlLeadRdlRi). " ::= { aluRS232Entry 23 } aluRS232MultiDrop OBJECT-TYPE SYNTAX INTEGER { disabled (1), slave (2), master (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232MultiDrop is used to configure the Multi-drop Data Bridge (MDDB) mode of the interface. 'slave' and 'master' mode is valid for subrate (HCM) speeds only. Changing to 'slave' results in forcing aluRS232Duplex to 'half' and aluRS232SBitSignaling to 'off'. Changing to 'disabled' results in defaulting aluRS232Duplex and aluRS232SBitSignaling (as aluRS232DataPosition permits). Changing to 'master' results in forcing aluRS232Duplex to 'full', aluRS232SBitSignaling to 'on' and aluRS232DataPosition to 'f0b5'. aluRS232MultiDrop is not valid while the sub-channel is aluRS232SocketEntry. " DEFVAL { disabled } ::= { aluRS232Entry 24 } aluRS232SBitSignaling OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232SBitSignaling is used to configure the S-Bit signaling mode of the interface. This object is valid for subrate (HCM) speeds only. 'on' is not supported while aluRS232MultiDrop is 'slave'. 'on' is not allowed while aluRS232DataPosition is 'f0b6'. " DEFVAL { on } ::= { aluRS232Entry 25 } aluRS232DataPosition OBJECT-TYPE SYNTAX INTEGER { f0b5 (1), f0b6 (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232DataPosition is used to configure the HCM data position. This object is valid for subrate (HCM) speeds only. 'f0b6' is not allowed while aluRS232SBitSignaling is 'on'. " DEFVAL { f0b5 } ::= { aluRS232Entry 26 } aluRS232HoldTimeUp OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "deci-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232HoldTimeUp is used to configure the hold-timer for link up event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that an up transition is reported immediately." DEFVAL { 0 } ::= { aluRS232Entry 27 } aluRS232HoldTimeDown OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "deci-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232HoldTimeDown is used to configure the hold-timer for link down event dampening. This guards against reporting excessive interface transitions. This is implemented by not advertising subsequent transitions of the interface to upper layer protocols until the configured timer has expired. A value of zero (0) indicates that a down transition is reported immediately." DEFVAL { 0 } ::= { aluRS232Entry 28 } aluRS232ControlLeadsSignal OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) MAX-ACCESS read-only STATUS current DESCRIPTION "aluRS232ControlLeadsSignal is an array of byte values used to indicate the current signal levels of the input and output control leads (connected to the attached CPE). These values are the ones that get signalled over the (physical) line. As such, they are sometimes referred to as LINE-side values. For network-side values, see aluRS232ControlLeadsState. Each byte in the array represents the signal level of an individual control lead. The byte order is as follows: -- DtrDsr (LSB or byte0) -- RtsDcdC -- AlbCts -- RdlRi -- DsrDtr -- DcdRtsI -- CtsAlb -- RiRdl (MSB or byte7) A byte value of 1 represents on (or high as per AluRS232ControlLead). A byte value of 2 represents off (or low as per AluRS232ControlLead). All other byte values are undefined. A particular byte is undefined if its config counterpart is undefined. For example, given an X.21 interface, aluRS232ControlLeadDsrDtr is undefined thus, aluRS232ControlLeadsSignal byte 'DtrDsr' is also undefined. Some bytes can represent something else depending on the interface type. For example, given an RS-530, RdlRi represents LlTm. See the respective object for details (eg. aluRS232ControlLeadRdlRi). " ::= { aluRS232Entry 29 } aluRS232ControlLeadMonDtrDsr OBJECT-TYPE SYNTAX AluRS232ControlLeadMon MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadMonDtrDsr is used to configure monitoring of the input control lead signal, DtrDsr. While monitored, detected transitions will trigger aluRS232ControlLeadsSignalChange. 'high' and 'low' are supported on sdiv3 only." DEFVAL { off } ::= { aluRS232Entry 30 } aluRS232ControlLeadMonRtsDcdC OBJECT-TYPE SYNTAX AluRS232ControlLeadMon MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadMonRtsDcdC is used to configure monitoring of the input control lead signal, RtsDcdC. While monitored, detected transitions will trigger aluRS232ControlLeadsSignalChange. 'high' and 'low' are supported on sdiv3 only." DEFVAL { off } ::= { aluRS232Entry 31 } aluRS232ControlLeadMonAlbCts OBJECT-TYPE SYNTAX AluRS232ControlLeadMon MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadMonAlbCts is used to configure monitoring of the input control lead signal, AlbCts. While monitored, detected transitions will trigger aluRS232ControlLeadsSignalChange. For RS-530, AlbCts represents RlCts. This object is not supported on the SAR-H and SAR-Hc systems. 'high' and 'low' are supported on sdiv3 only." DEFVAL { off } ::= { aluRS232Entry 32 } aluRS232ControlLeadMonRdlRi OBJECT-TYPE SYNTAX AluRS232ControlLeadMon MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ControlLeadMonRdlRi is used to configure monitoring of the input control lead signal, RdlRi. While monitored, detected transitions will trigger aluRS232ControlLeadsSignalChange. For RS-530, RdlRi represents LlTm. This object is not supported on the SAR-H and SAR-Hc systems. 'high' and 'low' are supported on sdiv3 only." DEFVAL { off } ::= { aluRS232Entry 33 } aluRS232ClockSyncState OBJECT-TYPE SYNTAX INTEGER { unknown (0), normal (1), holdOver (2), freeRun (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluRS232ClockSyncState indicates the current clock synchronization state if aluRS232ClockSource is 'dcrSerial'. unknown(0) - Unsupported or unknown state normal(1) - Normal (locked) state holdOver(2) - Synchronization with reference has been lost freeRun(3) - Synchronized with internal reference" ::= { aluRS232Entry 34 } aluRS232ClockMasterPortId OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluRS232ClockMasterPortId indicates the current clock synchronization master port id if aluRS232ClockSource is 'dcrSerial'." ::= { aluRS232Entry 35 } aluRS232InvertClock OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232InvertClock specifies whether to invert the clock edge that the interface samples for received data (if local gender is DCE) or transmitted data (if local gender is DTE). Inverting the clock may correct issues such as those related to phase shift. For example, data changes state near the interface's sampling clock edge. Contributors to phase shift variance include, but are not limited to: cable length and interface rate. 'enabled' not supported on SAR-H and SAR-Hc systems. 'enabled' not supported on sdiv1 and sdiv2. 'enabled' not allowed while aluRS232DeviceMode is asynchronous. " DEFVAL { disabled } ::= { aluRS232Entry 36 } aluRS232MonClockDeviationRaise OBJECT-TYPE SYNTAX Unsigned32 (0|10..100) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232MonClockDeviationRaise specifies the amount of time to debounce clock deviation before asserting the port fault condition, 'monClockDeviation'. Clock deviation is detected when the external clock exceeds a +/- 6% deviation from the internal interface rate clock. The special value 0 means clock deviation monitoring is disabled (ie. detection off and any concurrent assertion will be cleared immediately). While this object is 0, aluRS232MonClockDeviationClear must also be 0. Non-zero values must be specified in increments of 10. Non-zero values not supported on SAR-H and SAR-Hc systems. Non-zero values not supported on sdiv1 and sdiv2. Non-zero values not allowed while aluRS232DeviceMode is asynchronous. " DEFVAL { 0 } ::= { aluRS232Entry 37 } aluRS232MonClockDeviationClear OBJECT-TYPE SYNTAX Unsigned32 (0|10..100) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232MonClockDeviationClear specifies the amount of time to debounce no clock deviation before de-asserting the port fault condition, 'monClockDeviation'. No clock deviation is detected when the external clock does not exceed a +/- 6% deviation from the internal interface rate clock. The special value 0 means clock deviation monitoring is disabled (ie. detection off and any concurrent assertion will be cleared immediately). While this object is 0, aluRS232MonClockDeviationRaise must also be 0. Non-zero values must be specified in increments of 10. Non-zero values not supported on SAR-H and SAR-Hc systems. Non-zero values not supported on sdiv1 and sdiv2. Non-zero values not allowed while aluRS232DeviceMode is asynchronous. " DEFVAL { 0 } ::= { aluRS232Entry 38 } aluRS232MonDataInactivityRaise OBJECT-TYPE SYNTAX Unsigned32 (0|10..100) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232MonDataInactivityRaise specifies the amount of time to debounce data inactivity before asserting the port fault condition, 'monDataInactivity'. The special value 0 means data inactivity monitoring is disabled (ie. detection off and any concurrent assertion will be cleared immediately). While this object is 0, aluRS232MonDataInactivityClear must also be 0. Non-zero values must be specified in increments of 10. Non-zero values not supported on SAR-H and SAR-Hc systems. Non-zero values not supported on sdiv1 and sdiv2. " DEFVAL { 0 } ::= { aluRS232Entry 39 } aluRS232MonDataInactivityClear OBJECT-TYPE SYNTAX Unsigned32 (0|10..100) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232MonDataInactivityClear specifies the amount of time to debounce data activity before de-asserting the port fault condition, 'monDataInactivity'. The special value 0 means data inactivity monitoring is disabled (ie. detection off and any concurrent assertion will be cleared immediately). While this object is 0, aluRS232MonDataInactivityRaise must also be 0. Non-zero values must be specified in increments of 10. Non-zero values not supported on SAR-H and SAR-Hc systems. Non-zero values not supported on sdiv1 and sdiv2. " DEFVAL { 0 } ::= { aluRS232Entry 40 } -- -- RS232 Channel Group Table -- aluRS232ChanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AluRS232ChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluRS232ChanGroupTable has an entry for 64kbps (DS0) channels grouped together and belonging to a particular Serial channel." ::= { aluPortObjs 6 } aluRS232ChanGroupEntry OBJECT-TYPE SYNTAX AluRS232ChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents one or more Serial channels on an interface. Entries can be created and deleted via SNMP SET operations using the aluRS232ChanGroupRowStatus object. For each aluRS232ChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluRS232ChanGroupTable 1 } AluRS232ChanGroupEntry ::= SEQUENCE { aluRS232ChanGroupRowStatus RowStatus, aluRS232ChanGroupTimeSlots TmnxDs0ChannelList, aluRS232ChanGroupMTU Unsigned32, aluRS232ChanGroupOperMTU Unsigned32, aluRS232ChanGroupCRC INTEGER, aluRS232ChanGroupIdleCycleFlags TmnxDSXIdleCycleFlags, aluRS232ChanGroupPayloadFillType TmnxDSXIdleFillType, aluRS232ChanGroupPayloadPattern Unsigned32 } aluRS232ChanGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ChanGroupRowStatus controls the creation and deletion of row entries in the aluRS232ChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme." ::= { aluRS232ChanGroupEntry 1 } aluRS232ChanGroupTimeSlots OBJECT-TYPE SYNTAX TmnxDs0ChannelList MAX-ACCESS read-only STATUS current DESCRIPTION "aluRS232ChanGroupTimeSlots is a bitmap which is used to represent the timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization." ::= { aluRS232ChanGroupEntry 2 } aluRS232ChanGroupMTU OBJECT-TYPE SYNTAX Unsigned32 (0|578..9208) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. Setting aluRS232ChanGroupMTU to a value of zero (0), causes the agent to recalculate the default MTU size which can vary based on the current setting of tmnxPortMode and tmnxPortEncapType variables. Some typical 7705 default values are: 1572 with mode access and encap-type ipcp" ::= { aluRS232ChanGroupEntry 3 } aluRS232ChanGroupOperMTU OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent." ::= { aluRS232ChanGroupEntry 4 } aluRS232ChanGroupCRC OBJECT-TYPE SYNTAX INTEGER { crc16 (1), crc32 (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232ChanGroupCRC variable indicates the precision of the cyclic redundancy check. A value of 'crc16' is a 16-bit CRC calculation. A value of 'crc32' is a 32-bit CRC calculation. 32-bit CRC increases the error detection ability, but it also adds some performance overhead." DEFVAL { crc32 } ::= { aluRS232ChanGroupEntry 5 } aluRS232ChanGroupIdleCycleFlags OBJECT-TYPE SYNTAX TmnxDSXIdleCycleFlags MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232ChanGroupIdleCycleFlags configures the value that the channel group transmits during idle cycle." DEFVAL { flags } ::= { aluRS232ChanGroupEntry 6 } aluRS232ChanGroupPayloadFillType OBJECT-TYPE SYNTAX TmnxDSXIdleFillType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232ChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. If the type is set to 'userDefinedPattern' then the value of aluRS232ChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' " DEFVAL { notApplicable } ::= { aluRS232ChanGroupEntry 7 } aluRS232ChanGroupPayloadPattern OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluRS232ChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and aluRS232ChanGroupPayloadFillType is set to 'userDefinedPattern'. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0)." DEFVAL { 0 } ::= { aluRS232ChanGroupEntry 8 } -- -- Port Discards Stats Table -- aluPortDiscardStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortDiscardsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series port packet discard statistics table for providing, via SNMP, the capability of retrieving the detailed packet discard statistics." ::= { aluPortStatsObjs 1 } aluPortDiscardsStatsEntry OBJECT-TYPE SYNTAX AluPortDiscardsStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluPortDiscardStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPortDiscardStatsTable 1 } AluPortDiscardsStatsEntry ::= SEQUENCE { aluPortInL2AddrProtoDiscards Counter64, aluPortInMPLSLabelDiscards Counter64, aluPortInIPAddrProtoDiscards Counter64, aluPortInVlanIdDiscards Counter64, aluPortInHdlcCrcDiscards Counter64, aluPortOutPortMtuDiscards Counter64, aluPortInCsmQHiPriDiscards Counter64, aluPortInCsmQLowPriDiscards Counter64, aluPortInCsmQFtpPriDiscards Counter64, aluPortOutCsmQDiscards Counter64, aluPortInOtherDiscards Counter64, aluPortOutOtherDiscards Counter64, aluPortInCsmQMediumPriDiscards Counter64, aluPortInHardPolicerDiscards Counter64, aluPortInL2MacDADiscards Counter64, aluPortInL2ETypeDiscards Counter64 } aluPortInL2AddrProtoDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInL2AddrProtoDiscards indicates the number of packets discarded that contained an unsupported type/protocol or unknown address at layer 2." ::= { aluPortDiscardsStatsEntry 1 } aluPortInMPLSLabelDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInMPLSLabelDiscards indicates the number of packets discarded that contained unknown mpls outer tunnels, unknown inner label or more than two unsupported labels." ::= { aluPortDiscardsStatsEntry 2 } aluPortInIPAddrProtoDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInIPAddrProtoDiscards indicates the number of packets discarded that contained an invalid IP address or unsupported IP protocol." ::= { aluPortDiscardsStatsEntry 3 } aluPortInVlanIdDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInVlanIdDiscards indicates the number of packets discarded that contained an unknown VLAN Id." ::= { aluPortDiscardsStatsEntry 4 } aluPortInHdlcCrcDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInHdlcCrcDiscards indicates the number of packets discarded due to the HDLC frame containing a CRC error. This statistic is only applicable to interfaces that have an encapsulation type of PPP-AUTO." ::= { aluPortDiscardsStatsEntry 5 } aluPortOutPortMtuDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortOutPortMtuDiscards indicates the number of packets discarded at egress due to the packet exceeding the configured port mtu." ::= { aluPortDiscardsStatsEntry 6 } aluPortInCsmQHiPriDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInCsmQHiPriDiscards indicates the number of packets discarded in the Ingress CSM High Priority Queue." ::= { aluPortDiscardsStatsEntry 7 } aluPortInCsmQLowPriDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInCsmQLowPriDiscards indicates the number of packets discarded in the Ingress CSM Low Priority Queue." ::= { aluPortDiscardsStatsEntry 8 } aluPortInCsmQFtpPriDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "aluPortInCsmQFtpPriDiscards indicates the number of packets discarded in the Ingress CSM Ftp Priority Queue." ::= { aluPortDiscardsStatsEntry 9 } aluPortOutCsmQDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortOutCsmQDiscards indicates the number of packets discarded in the Egress CSM Queue." ::= { aluPortDiscardsStatsEntry 10 } aluPortInOtherDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInOtherDiscards indicates the number of packets discarded at ingress for other reasons during processing." ::= { aluPortDiscardsStatsEntry 11 } aluPortOutOtherDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortOutOtherDiscards indicates the number of packets discarded at egress for other reasons during processing." ::= { aluPortDiscardsStatsEntry 12 } aluPortInCsmQMediumPriDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInCsmQMediumPriDiscards indicates the number of packets discarded in the Ingress CSM Medium Priority Queue." ::= { aluPortDiscardsStatsEntry 13 } aluPortInHardPolicerDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInHardPolicerDiscards indicates the number of packets discarded by the ingress hard policer." ::= { aluPortDiscardsStatsEntry 14 } aluPortInL2MacDADiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInL2MacDADiscards indicates the number of packets discarded that contained an unknown Mac DA." ::= { aluPortDiscardsStatsEntry 15 } aluPortInL2ETypeDiscards OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortInL2MacDADiscards indicates the number of packets discarded that contained an unknown Ethertype." ::= { aluPortDiscardsStatsEntry 16 } -- -- Port ACR Clock Stats Table -- aluPortAcrClkStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortAcrClkStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series port adaptive clock recovery (ACR) statistics table for providing, via SNMP, the capability of retrieving statistical information relating to clock that is derived from the ACR CPIPE PW." ::= { aluPortStatsObjs 2 } aluPortAcrClkStatsEntry OBJECT-TYPE SYNTAX AluPortAcrClkStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluPortAcrClkStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPortAcrClkStatsTable 1 } AluPortAcrClkStatsEntry ::= SEQUENCE { aluLastUpdateTime TimeStamp, aluTotalMinutesIn24Hour Unsigned32, aluCurrent24HourFreqOffsetMeanPpb Integer32, aluCurrent24HourFreqOffsetStdDevPpb Unsigned32, aluMaxShortIntervalMinutes Unsigned32, aluTotalShortIntervalMinutes Unsigned32, aluCurrent1MinValidData TruthValue, aluCurrent1MinPhaseErrorMeanPpb Integer32, aluCurrent1MinPhaseErrorStdDevNs Unsigned32, aluCurrent1MinPhaseErrorMeanNs Integer32, aluCurrent1MinFreqOffsetMeanPpb Integer32, aluCurrent1MinFreqOffsetStdDevPpb Unsigned32 } aluLastUpdateTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last time the ACR statistics were updated" ::= { aluPortAcrClkStatsEntry 1 } aluTotalMinutesIn24Hour OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of minutes in alu24HourFreqOffsetMeanPpb and alu24HourFreqOffsetStdDevPpb" ::= { aluPortAcrClkStatsEntry 2 } aluCurrent24HourFreqOffsetMeanPpb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluCurrent24HourFreqOffsetMeanPpb indicates the mean frequency offset from the local oscillator clock in parts per billion for up to the last 24 hour." ::= { aluPortAcrClkStatsEntry 3 } aluCurrent24HourFreqOffsetStdDevPpb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluCurrent24HourFreqOffsetStdDevPpb indicates the standard deviation of the frequency offset from the local oscillator clock in parts per billion for up to the last 24 hour." ::= { aluPortAcrClkStatsEntry 4 } aluMaxShortIntervalMinutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluMaxShortIntervalMinutes the maximum number of aluIntervalNumber." ::= { aluPortAcrClkStatsEntry 5 } aluTotalShortIntervalMinutes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluTotalShortIntervalMinutes is the number of aluIntervalNumber that have valid statistics" ::= { aluPortAcrClkStatsEntry 6 } aluCurrent1MinValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for the first interval is valid." ::= { aluPortAcrClkStatsEntry 7 } aluCurrent1MinPhaseErrorMeanPpb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean phase error from the local oscillator clock in parts per billion during the first interval." ::= { aluPortAcrClkStatsEntry 8 } aluCurrent1MinPhaseErrorStdDevNs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The standard deviation of the phase error from the local oscillator clock in nano seconds during the first interval." ::= { aluPortAcrClkStatsEntry 9 } aluCurrent1MinPhaseErrorMeanNs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean of the phase error from the local oscillator clock in nano seconds during the first interval." ::= { aluPortAcrClkStatsEntry 10 } aluCurrent1MinFreqOffsetMeanPpb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean frequency offset from the local oscillator clock in parts per billion during the first interval." ::= { aluPortAcrClkStatsEntry 11 } aluCurrent1MinFreqOffsetStdDevPpb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The standard deviation of the frequency offset from the local oscillator clock in nano seconds during the first interval." ::= { aluPortAcrClkStatsEntry 12 } -- -- Port ACR Clock Stats Short Interval Table -- aluPortAcrClkStatsShortIntervalTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortAcrClkStatsShortIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port ACR Clock Interval Table contains various statistics collected by each adaptively timed port over the previous 15 minutes. The past 15 minutes are broken into 15 1 minute intervals. Each row in this table represents one such interval (identified by aluAcrClkIntervalNumber)." ::= { aluPortStatsObjs 3 } aluPortAcrClkStatsShortIntervalEntry OBJECT-TYPE SYNTAX AluPortAcrClkStatsShortIntervalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Port ACR Clock Interval table." INDEX { tmnxChassisIndex, tmnxPortPortID, aluIntervalNumber} ::= { aluPortAcrClkStatsShortIntervalTable 1 } AluPortAcrClkStatsShortIntervalEntry ::= SEQUENCE { aluIntervalNumber INTEGER, aluIntervalValidData TruthValue, aluIntervalUpdateTime TimeStamp, aluIntervalPhaseErrorMeanPpb Integer32, aluIntervalPhaseErrorStdDevNs Unsigned32, aluIntervalPhaseErrorMeanNs Integer32, aluIntervalFreqOffsetMeanPpb Integer32, aluIntervalFreqOffsetStdDevPpb Unsigned32 } aluIntervalNumber OBJECT-TYPE SYNTAX INTEGER (1..15) MAX-ACCESS read-only STATUS current DESCRIPTION "A number between 1 and 15, where 1 is the most recently completed 1 minute interval and 15 is the 1 minutes interval completed 14 minutes prior to interval 1." ::= { aluPortAcrClkStatsShortIntervalEntry 1 } aluIntervalValidData OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates if the data for this interval is valid." ::= { aluPortAcrClkStatsShortIntervalEntry 2 } aluIntervalUpdateTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The update time of the ACR interval statistics" ::= { aluPortAcrClkStatsShortIntervalEntry 3 } aluIntervalPhaseErrorMeanPpb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean phase error from the local oscillator clock in parts per billion during the interval." ::= { aluPortAcrClkStatsShortIntervalEntry 4 } aluIntervalPhaseErrorStdDevNs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The standard deviation of the phase error from the local oscillator clock in nano seconds during the interval." ::= { aluPortAcrClkStatsShortIntervalEntry 5 } aluIntervalPhaseErrorMeanNs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean of the phase error from the local oscillator clock in nano seconds during the interval." ::= { aluPortAcrClkStatsShortIntervalEntry 6 } aluIntervalFreqOffsetMeanPpb OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean frequency offset from the local oscillator clock in parts per billion during the interval." ::= { aluPortAcrClkStatsShortIntervalEntry 7 } aluIntervalFreqOffsetStdDevPpb OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The standard deviation of the frequency offset from the local oscillator clock in nano seconds during the interval." ::= { aluPortAcrClkStatsShortIntervalEntry 8 } -- -- Network Port Ingress Control Stats Table -- aluPortNetIngressControlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortNetIngressControlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series port ingress control statistics table for providing, via SNMP, the capability of retrieving the ingress control traffic statistics for ports in network or hybrid modes. This table is not applicable to ports in access mode." ::= { aluPortStatsObjs 4 } aluPortNetIngressControlStatsEntry OBJECT-TYPE SYNTAX AluPortNetIngressControlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluPortNetIngressControlStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPortNetIngressControlStatsTable 1 } AluPortNetIngressControlStatsEntry ::= SEQUENCE { aluPortNetIngressControlFwdPkts Counter64, aluPortNetIngressControlFwdOcts Counter64, aluPortNetIngressControlDroPkts Counter64, aluPortNetIngressControlDroOcts Counter64 } aluPortNetIngressControlFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetIngressControlFwdPkts indicates the number of ingress control packets forwarded on this port." ::= { aluPortNetIngressControlStatsEntry 1 } aluPortNetIngressControlFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetIngressControlFwdOcts indicates the number of ingress control octets forwarded on this port." ::= { aluPortNetIngressControlStatsEntry 2 } aluPortNetIngressControlDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetIngressControlDroPkts indicates the number of ingress control packets dropped on this port." ::= { aluPortNetIngressControlStatsEntry 3 } aluPortNetIngressControlDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetIngressControlDroOcts indicates the number of ingress control octets dropped on this port." ::= { aluPortNetIngressControlStatsEntry 4 } -- -- Network Port Egress Control Stats Table -- aluPortNetEgressControlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortNetEgressControlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series port egress control statistics table for providing, via SNMP, the capability of retrieving the egress control traffic statistics for ports in network or hybrid modes." ::= { aluPortStatsObjs 5 } aluPortNetEgressControlStatsEntry OBJECT-TYPE SYNTAX AluPortNetEgressControlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluPortNetEgressControlStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPortNetEgressControlStatsTable 1 } AluPortNetEgressControlStatsEntry ::= SEQUENCE { aluPortNetEgressControlFwdPkts Counter64, aluPortNetEgressControlFwdOcts Counter64, aluPortNetEgressControlDroPkts Counter64, aluPortNetEgressControlDroOcts Counter64 } aluPortNetEgressControlFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetEgressControlFwdPkts indicates the number of egress control packets forwarded on this port." ::= { aluPortNetEgressControlStatsEntry 1 } aluPortNetEgressControlFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetEgressControlFwdOcts indicates the number of egress control octets forwarded on this port." ::= { aluPortNetEgressControlStatsEntry 2 } aluPortNetEgressControlDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetEgressControlDroPkts indicates the number of egress control packets dropped on this port." ::= { aluPortNetEgressControlStatsEntry 3 } aluPortNetEgressControlDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetEgressControlDroOcts indicates the number of egress control octets dropped on this port." ::= { aluPortNetEgressControlStatsEntry 4 } -- -- ALU GPON Port Current Interval Stats Table -- aluGponPortCurrentTable OBJECT-TYPE SYNTAX SEQUENCE OF AluGponPortCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluGponPortCurrentTable contains various statistics being collected from the ONT for the current 15 minute interval." ::= { aluPortStatsObjs 6 } aluGponPortCurrentEntry OBJECT-TYPE SYNTAX AluGponPortCurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluGponPortCurrentTable. Entries are created and deleted by the system depending on port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluGponPortCurrentTable 1 } AluGponPortCurrentEntry ::= SEQUENCE { aluGponPortCurrentLastUpdTime TimeStamp, aluGponPortCurrentPMEnabled TruthValue, aluGponPortCurrentTxFrames Counter32, aluGponPortCurrentRxFrames Counter32, aluGponPortCurrentTxBytes Counter32, aluGponPortCurrentRxBytes Counter32, aluGponPortCurrentDropFrsUp Counter32, aluGponPortCurrentDropFrsDn Counter32, aluGponPortCurrentTxFrsMcast Counter32, aluGponPortCurrentRxFrsMcast Counter32, aluGponPortCurrentFCSEs Counter32, aluGponPortCurrentECs Counter32, aluGponPortCurrentLCs Counter32, aluGponPortCurrentFTLs Counter32, aluGponPortCurrentRBOs Counter32, aluGponPortCurrentTBOs Counter32, aluGponPortCurrentSCFs Counter32, aluGponPortCurrentMCFs Counter32, aluGponPortCurrentSQEs Counter32, aluGponPortCurrentDTs Counter32, aluGponPortCurrentIMTEs Counter32, aluGponPortCurrentCSEs Counter32, aluGponPortCurrentAEs Counter32, aluGponPortCurrentIMREs Counter32, aluGponPortCurrentLostFragsDn Counter32, aluGponPortCurrentLostFragsUp Counter32, aluGponPortCurrentRxFrags Counter32, aluGponPortCurrentRxBlocks Counter32, aluGponPortCurrentTxBlocks Counter32, aluGponPortCurrentTxFrags Counter32, aluGponPortCurrentBadHeaders Counter32 } aluGponPortCurrentLastUpdTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last time at which this data was collected." ::= { aluGponPortCurrentEntry 1 } aluGponPortCurrentPMEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not PM Collection has been enabled on the ONT." ::= { aluGponPortCurrentEntry 2 } aluGponPortCurrentTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted Ethernet Frames. " ::= { aluGponPortCurrentEntry 3 } aluGponPortCurrentRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received Ethernet Frames. " ::= { aluGponPortCurrentEntry 4 } aluGponPortCurrentTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted Ethernet Bytes. " ::= { aluGponPortCurrentEntry 5 } aluGponPortCurrentRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received Ethernet Bytes. " ::= { aluGponPortCurrentEntry 6 } aluGponPortCurrentDropFrsUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Dropped Frames Upstream. " ::= { aluGponPortCurrentEntry 7 } aluGponPortCurrentDropFrsDn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Dropped Frames Downstream. " ::= { aluGponPortCurrentEntry 8 } aluGponPortCurrentTxFrsMcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted Multicast Ethernet Frames. " ::= { aluGponPortCurrentEntry 9 } aluGponPortCurrentRxFrsMcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received Multicast Ethernet Frames. " ::= { aluGponPortCurrentEntry 10 } aluGponPortCurrentFCSEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Frame Check Sequence(FCS)Errors." ::= { aluGponPortCurrentEntry 11 } aluGponPortCurrentECs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Excessive Collisions." ::= { aluGponPortCurrentEntry 12 } aluGponPortCurrentLCs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Late Collisions." ::= { aluGponPortCurrentEntry 13 } aluGponPortCurrentFTLs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Frames that are Too Long." ::= { aluGponPortCurrentEntry 14 } aluGponPortCurrentRBOs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Receive Buffer Overflows." ::= { aluGponPortCurrentEntry 15 } aluGponPortCurrentTBOs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmit Buffer Overflows." ::= { aluGponPortCurrentEntry 16 } aluGponPortCurrentSCFs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted Single Collision Frames." ::= { aluGponPortCurrentEntry 17 } aluGponPortCurrentMCFs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted Multiple Collision Frames." ::= { aluGponPortCurrentEntry 18 } aluGponPortCurrentSQEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of SQE Test Error messages generated." ::= { aluGponPortCurrentEntry 19 } aluGponPortCurrentDTs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames delayed due to Deferred Transmission." ::= { aluGponPortCurrentEntry 20 } aluGponPortCurrentIMTEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of unsuccessfully transmitted frames due to Internal MAC Transmit Error." ::= { aluGponPortCurrentEntry 21 } aluGponPortCurrentCSEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Carrier Sense Errors." ::= { aluGponPortCurrentEntry 22 } aluGponPortCurrentAEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames having Alignment Errors." ::= { aluGponPortCurrentEntry 23 } aluGponPortCurrentIMREs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of unsuccessfully received frames due to Internal MAC Receive Error." ::= { aluGponPortCurrentEntry 24 } aluGponPortCurrentLostFragsDn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Lost GEM Fragments (downstream). " ::= { aluGponPortCurrentEntry 25 } aluGponPortCurrentLostFragsUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Lost GEM Fragments (upstream). " ::= { aluGponPortCurrentEntry 26 } aluGponPortCurrentRxFrags OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received GEM Fragments. " ::= { aluGponPortCurrentEntry 27 } aluGponPortCurrentRxBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received GEM Blocks. " ::= { aluGponPortCurrentEntry 28 } aluGponPortCurrentTxBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted GEM Blocks. " ::= { aluGponPortCurrentEntry 29 } aluGponPortCurrentTxFrags OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted GEM Fragments. " ::= { aluGponPortCurrentEntry 30 } aluGponPortCurrentBadHeaders OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received GEM Headers that are bad. " ::= { aluGponPortCurrentEntry 31 } -- -- ALU GPON Port Previous Interval Stats Table -- aluGponPortPreviousTable OBJECT-TYPE SYNTAX SEQUENCE OF AluGponPortPreviousEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluGponPortPreviousTable contains various statistics that were collected during the previous 15 minute interval." ::= { aluPortStatsObjs 7 } aluGponPortPreviousEntry OBJECT-TYPE SYNTAX AluGponPortPreviousEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluGponPortPreviousTable. Entries are created and deleted by the system depending on port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluGponPortPreviousTable 1 } AluGponPortPreviousEntry ::= SEQUENCE { aluGponPortPreviousLastUpdTime TimeStamp, aluGponPortPreviousPMEnabled TruthValue, aluGponPortPreviousTxFrames Counter32, aluGponPortPreviousRxFrames Counter32, aluGponPortPreviousTxBytes Counter32, aluGponPortPreviousRxBytes Counter32, aluGponPortPreviousDropFrsUp Counter32, aluGponPortPreviousDropFrsDn Counter32, aluGponPortPreviousTxFrsMcast Counter32, aluGponPortPreviousRxFrsMcast Counter32, aluGponPortPreviousFCSEs Counter32, aluGponPortPreviousECs Counter32, aluGponPortPreviousLCs Counter32, aluGponPortPreviousFTLs Counter32, aluGponPortPreviousRBOs Counter32, aluGponPortPreviousTBOs Counter32, aluGponPortPreviousSCFs Counter32, aluGponPortPreviousMCFs Counter32, aluGponPortPreviousSQEs Counter32, aluGponPortPreviousDTs Counter32, aluGponPortPreviousIMTEs Counter32, aluGponPortPreviousCSEs Counter32, aluGponPortPreviousAEs Counter32, aluGponPortPreviousIMREs Counter32, aluGponPortPreviousLostFragsDn Counter32, aluGponPortPreviousLostFragsUp Counter32, aluGponPortPreviousRxFrags Counter32, aluGponPortPreviousRxBlocks Counter32, aluGponPortPreviousTxBlocks Counter32, aluGponPortPreviousTxFrags Counter32, aluGponPortPreviousBadHeaders Counter32 } aluGponPortPreviousLastUpdTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The last time at which this data was collected." ::= { aluGponPortPreviousEntry 1 } aluGponPortPreviousPMEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether or not PM Collection has been enabled on the ONT." ::= { aluGponPortPreviousEntry 2 } aluGponPortPreviousTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted Ethernet Frames. " ::= { aluGponPortPreviousEntry 3 } aluGponPortPreviousRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received Ethernet Frames. " ::= { aluGponPortPreviousEntry 4 } aluGponPortPreviousTxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted Ethernet Bytes. " ::= { aluGponPortPreviousEntry 5 } aluGponPortPreviousRxBytes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received Ethernet Bytes. " ::= { aluGponPortPreviousEntry 6 } aluGponPortPreviousDropFrsUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Dropped Frames Upstream. " ::= { aluGponPortPreviousEntry 7 } aluGponPortPreviousDropFrsDn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Dropped Frames Downstream. " ::= { aluGponPortPreviousEntry 8 } aluGponPortPreviousTxFrsMcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted Multicast Ethernet Frames. " ::= { aluGponPortPreviousEntry 9 } aluGponPortPreviousRxFrsMcast OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received Multicast Ethernet Frames. " ::= { aluGponPortPreviousEntry 10 } aluGponPortPreviousFCSEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Frame Check Sequence(FCS)Errors." ::= { aluGponPortPreviousEntry 11 } aluGponPortPreviousECs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Excessive Collisions." ::= { aluGponPortPreviousEntry 12 } aluGponPortPreviousLCs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Late Collisions." ::= { aluGponPortPreviousEntry 13 } aluGponPortPreviousFTLs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Frames that are Too Long." ::= { aluGponPortPreviousEntry 14 } aluGponPortPreviousRBOs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Receive Buffer Overflows." ::= { aluGponPortPreviousEntry 15 } aluGponPortPreviousTBOs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmit Buffer Overflows." ::= { aluGponPortPreviousEntry 16 } aluGponPortPreviousSCFs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted Single Collision Frames." ::= { aluGponPortPreviousEntry 17 } aluGponPortPreviousMCFs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of successfully transmitted Multiple Collision Frames." ::= { aluGponPortPreviousEntry 18 } aluGponPortPreviousSQEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of SQE Test Error messages generated." ::= { aluGponPortPreviousEntry 19 } aluGponPortPreviousDTs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames delayed due to Deferred Transmission." ::= { aluGponPortPreviousEntry 20 } aluGponPortPreviousIMTEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of unsuccessfully transmitted frames due to Internal MAC Transmit Error." ::= { aluGponPortPreviousEntry 21 } aluGponPortPreviousCSEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Carrier Sense Errors." ::= { aluGponPortPreviousEntry 22 } aluGponPortPreviousAEs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames having Alignment Errors." ::= { aluGponPortPreviousEntry 23 } aluGponPortPreviousIMREs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of unsuccessfully received frames due to Internal MAC Receive Error." ::= { aluGponPortPreviousEntry 24 } aluGponPortPreviousLostFragsDn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Lost GEM Fragments (downstream). " ::= { aluGponPortPreviousEntry 25 } aluGponPortPreviousLostFragsUp OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Lost GEM Fragments (upstream). " ::= { aluGponPortPreviousEntry 26 } aluGponPortPreviousRxFrags OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received GEM Fragments. " ::= { aluGponPortPreviousEntry 27 } aluGponPortPreviousRxBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received GEM Blocks. " ::= { aluGponPortPreviousEntry 28 } aluGponPortPreviousTxBlocks OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted GEM Blocks. " ::= { aluGponPortPreviousEntry 29 } aluGponPortPreviousTxFrags OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Transmitted GEM Fragments. " ::= { aluGponPortPreviousEntry 30 } aluGponPortPreviousBadHeaders OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Received GEM Headers that are bad. " ::= { aluGponPortPreviousEntry 31 } -- -- ALU XDSL Line Stats Table -- aluXdslLineStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluXdslLineStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluXdslLineStatsTable contains various statistics being collected from the BCM6519 for each physical XDSL line on the 'XDSL' tmnxPortType port." ::= { aluPortStatsObjs 8 } aluXdslLineStatsEntry OBJECT-TYPE SYNTAX AluXdslLineStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluXdslLineStatsTable. Entries are created and deleted by the system depending on port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID, aluXdslLineID } ::= { aluXdslLineStatsTable 1 } AluXdslLineStatsEntry ::= SEQUENCE { aluXdslLineStatsNearEndFECS Counter64, aluXdslLineStatsNearEndLOSS Counter64, aluXdslLineStatsNearEndES Counter64, aluXdslLineStatsNearEndSES Counter64, aluXdslLineStatsNearEndUAS Counter64, aluXdslLineStatsNearEndAS Counter64, aluXdslLineStatsNearEndLOFS Counter64, aluXdslLineStatsNearEndLPRS Counter64, aluXdslLineStatsNearEndLEFTRS Counter64, aluXdslLineStatsFarEndFECS Counter64, aluXdslLineStatsFarEndLOSS Counter64, aluXdslLineStatsFarEndES Counter64, aluXdslLineStatsFarEndSES Counter64, aluXdslLineStatsFarEndUAS Counter64, aluXdslLineStatsFarEndAS Counter64, aluXdslLineStatsFarEndLOFS Counter64, aluXdslLineStatsFarEndLPRS Counter64, aluXdslLineStatsFarEndLEFTRS Counter64, aluXdslLineStatsUpTime Unsigned32 } aluXdslLineStatsNearEndFECS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Forward Error Correction Seconds - Near-End: Count of 1-second intervals with one or more FEC corrections on either one of the active latencies at the near-end." ::= { aluXdslLineStatsEntry 1 } aluXdslLineStatsNearEndLOSS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Loss of Signal Seconds - Near-End: Count of 1-second intervals with one or more LOS defects present at the near-end." ::= { aluXdslLineStatsEntry 2 } aluXdslLineStatsNearEndES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Errored Seconds - Near-End: Count of 1-second intervals with one or more FEBE anomalies, or 1 or more LOS defects, or one or more RDI defects." ::= { aluXdslLineStatsEntry 3 } aluXdslLineStatsNearEndSES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Severely Errored Seconds - Near-End: Count of 1-second intervals with 18 or more FEBE anomalies, or 1 or more LOS defects, or one or more RDI defects." ::= { aluXdslLineStatsEntry 4 } aluXdslLineStatsNearEndUAS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Unavailable Seconds - Near-End: Count of 1-second intervals for which the ADSL line is not available (the line becomes unavailable at the onset of 10 continuous SES)." ::= { aluXdslLineStatsEntry 5 } aluXdslLineStatsNearEndAS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Available Seconds - Near-End: Count of 1 second intervals for which the ADSL line is available." ::= { aluXdslLineStatsEntry 6 } aluXdslLineStatsNearEndLOFS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Loss of Framing Seconds - Near-End: Count of 1-second intervals containing one or more SEF defects at the near-end." ::= { aluXdslLineStatsEntry 7 } aluXdslLineStatsNearEndLPRS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Loss of power Seconds - Near-End: Count of 1-second intervals containing one or more LPR defects at the near-end." ::= { aluXdslLineStatsEntry 8 } aluXdslLineStatsNearEndLEFTRS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Low Error-Free Troughtput Rate Seconds - Near-End." ::= { aluXdslLineStatsEntry 9 } aluXdslLineStatsFarEndFECS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Forward Error Correction Seconds - Far-End: Count of 1-second intervals with one or more FEC corrections on either one of the active latencies at the far-end." ::= { aluXdslLineStatsEntry 10 } aluXdslLineStatsFarEndLOSS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Loss of Signal Seconds - Far-End: Count of 1-second intervals with one or more LOS defects present at the far-end." ::= { aluXdslLineStatsEntry 11 } aluXdslLineStatsFarEndES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Errored Seconds - Far-End: Count of 1-second intervals with one or more FEBE anomalies, or 1 or more LOS defects, or one or more RDI defects." ::= { aluXdslLineStatsEntry 12 } aluXdslLineStatsFarEndSES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Severely Errored Seconds - Far-End: Count of 1-second intervals with 18 or more FEBE anomalies, or 1 or more LOS defects, or one or more RDI defects." ::= { aluXdslLineStatsEntry 13 } aluXdslLineStatsFarEndUAS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Unavailable Seconds - Far-End: Count of 1-second intervals for which the ADSL line is not available (the line becomes unavailable at the onset of 10 continuous SES)." ::= { aluXdslLineStatsEntry 14 } aluXdslLineStatsFarEndAS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Available Seconds - Far-End: Count of 1 second intervals for which the ADSL line is available." ::= { aluXdslLineStatsEntry 15 } aluXdslLineStatsFarEndLOFS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Loss of Framing Seconds - Far-End: Count of 1-second intervals containing one or more SEF defects at the far-end." ::= { aluXdslLineStatsEntry 16 } aluXdslLineStatsFarEndLPRS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Loss of power Seconds - Far-End: Count of 1-second intervals containing one or more LPR defects at the far-end." ::= { aluXdslLineStatsEntry 17 } aluXdslLineStatsFarEndLEFTRS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of Low Error-Free Troughtput Rate Seconds - Far-End." ::= { aluXdslLineStatsEntry 18 } aluXdslLineStatsUpTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of seconds already in showtime." ::= { aluXdslLineStatsEntry 19 } -- -- ALU SHDSL Line Stats Table -- aluShdslLineStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluShdslLineStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluShdslLineStatsTable contains the SHDSL Performance statistics being collected from the Socrate-4e for each physical SHDSL line on the 'SHDSL' tmnxPortType port." ::= { aluPortStatsObjs 9 } aluShdslLineStatsEntry OBJECT-TYPE SYNTAX AluShdslLineStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluShdslLineStatsTable. Entries are created and deleted by the system depending on port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID, aluShdslLineID} ::= { aluShdslLineStatsTable 1 } AluShdslLineStatsEntry ::= SEQUENCE { aluShdslLineStatsLinkLoss Counter64, aluShdslLineStatsCVError Counter64, aluShdslLineStatsES Counter64, aluShdslLineStatsSES Counter64, aluShdslLineStatsLOSWS Counter64, aluShdslLineStatsUAS Counter64, aluShdslLineStatsInvalidDataFlag INTEGER } aluShdslLineStatsLinkLoss OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Link Loss Counter (Network Side). This counter is only valid for the local STU-R and is not polled by the STU-C," ::= { aluShdslLineStatsEntry 2 } aluShdslLineStatsCVError OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Code Violation Error Counter (Network Side). It is updated every second when the link is active." ::= { aluShdslLineStatsEntry 4 } aluShdslLineStatsES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Erroneous Seconds Counter (Network Side). It is updated every second when the link is active." ::= { aluShdslLineStatsEntry 5 } aluShdslLineStatsSES OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Severely Erroneous Seconds Counter (Network Side). It is updated every second when the link is active." ::= { aluShdslLineStatsEntry 6 } aluShdslLineStatsLOSWS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "LOSWS Counter (Network Side). It is updated every second when the link is active." ::= { aluShdslLineStatsEntry 7 } aluShdslLineStatsUAS OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Unavailable Seconds Counter (Network Side). It is updated every second when the link is active." ::= { aluShdslLineStatsEntry 8 } aluShdslLineStatsInvalidDataFlag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the validity of the PM data. It is set to 0 when the counters are reliable, otherwise it indicates that the far-end counters are not reliable." ::= { aluShdslLineStatsEntry 10 } -- -- Port Control Stats Table -- aluPortCtlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortCtlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series port control statistics table for providing, via SNMP, the capability of retrieving the detailed control packet statistics for ports in access modes. This table is not applicable to ports in network or hybrid mode." ::= { aluPortStatsObjs 10 } aluPortCtlStatsEntry OBJECT-TYPE SYNTAX AluPortCtlStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluPortCtlStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPortCtlStatsTable 1 } AluPortCtlStatsEntry ::= SEQUENCE { aluPortAccessCtlInFwdPkts Counter64, aluPortAccessCtlInFwdOcts Counter64, aluPortAccessCtlInDroPkts Counter64, aluPortAccessCtlInDroOcts Counter64, aluPortAccessCtlEgrFwdPkts Counter64, aluPortAccessCtlEgrFwdOcts Counter64, aluPortAccessCtlEgrDroPkts Counter64, aluPortAccessCtlEgrDroOcts Counter64 } aluPortAccessCtlInFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlInFwdPkts indicates the number of CTL packets that get forwarded on access port ingress ." ::= { aluPortCtlStatsEntry 1 } aluPortAccessCtlInFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlInFwdOcts indicates the number of CTL octets that get forwarded on access port ingress ." ::= { aluPortCtlStatsEntry 2 } aluPortAccessCtlInDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlInDroPkts indicates the number of CTL packets that get dropped on access port ingress ." ::= { aluPortCtlStatsEntry 3 } aluPortAccessCtlInDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlInDroOcts indicates the number of CTL octets that get dropped on access port ingress ." ::= { aluPortCtlStatsEntry 4 } aluPortAccessCtlEgrFwdPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlEgrFwdPkts indicates the number of CTL packets that get forwarded on access port egress ." ::= { aluPortCtlStatsEntry 5 } aluPortAccessCtlEgrFwdOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlEgrFwdOcts indicates the number of CTL octets that get forwarded on access port egress ." ::= { aluPortCtlStatsEntry 6 } aluPortAccessCtlEgrDroPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlEgrDroPkts indicates the number of CTL packets that get dropped on access port egress ." ::= { aluPortCtlStatsEntry 7 } aluPortAccessCtlEgrDroOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortAccessCtlEgrDroOcts indicates the number of CTL octets that get dropped on access port egress ." ::= { aluPortCtlStatsEntry 8 } -- -- ALU Voice Port table -- aluVoicePortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluVoicePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluVoicePortTable has an entry for a physical Voice port." ::= { aluPortObjs 7 } aluVoicePortEntry OBJECT-TYPE SYNTAX AluVoicePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical Voice port on an IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a Voice MDA type. The aluVoicePortEntry contains attributes that are unique to the Voice TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each aluVoicePortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluVoicePortTable 1 } AluVoicePortEntry ::= SEQUENCE { aluVoicePortLastChangeTime TimeStamp, aluVoicePortType INTEGER, aluVoicePortAudioWires INTEGER, aluVoicePortTlpRx AluVoicePortTlp, aluVoicePortTlpTx AluVoicePortTlp, aluVoicePortLineBalance INTEGER, aluVoicePortRingGeneration INTEGER, aluVoicePortSignalingType INTEGER } aluVoicePortLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "aluVoicePortLastChangeTime contains the sysUpTime value of the most recently modified writable variable in the aluVoicePortEntry row for this port." ::= { aluVoicePortEntry 1 } aluVoicePortType OBJECT-TYPE SYNTAX INTEGER { em (1), fxo (2), fxs (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoicePortType configures the interface-type of the physical port." DEFVAL { em } ::= { aluVoicePortEntry 2 } aluVoicePortAudioWires OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), twoWires (1), fourWires (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoicePortAudioWires is used to configure the number of audio wires for a given E&M interface. This object is valid for em ports only. twoWires is not allowed when any channel in the port trio is transmissionOnly. For example, if the channel under port 1 is transmissionOnly, then ports 1, 2 and port 3 cannot be set to twoWires. To change aluVoicePortAudioWires, the port must be shutdown. Changes result in defaulting of aluVoicePortTlpRx and aluVoicePortTlpTx. " DEFVAL { fourWires } ::= { aluVoicePortEntry 3 } aluVoicePortTlpRx OBJECT-TYPE SYNTAX AluVoicePortTlp UNITS "tenths of decibels" MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoicePortTlpRx is used to configure the receive Transmission Level Point level for a given voice interface. The receive TLP refers to the digital-to-analog level. The valid aluVoicePortTlpRx range for em 'fourWires' mode is -160 to +70. The valid aluVoicePortTlpRx range for em 'twoWires' mode is -100 to +60. For fxo and fxs ports: - valid range is -70 to 0 in 1db increments - default value is -30 To change aluVoicePortTlpRx, the port must be shutdown. " DEFVAL { 0 } ::= { aluVoicePortEntry 4 } aluVoicePortTlpTx OBJECT-TYPE SYNTAX AluVoicePortTlp UNITS "tenths of decibels" MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoicePortTlpTx is used to configure the transmit Transmission Level Point level for a given voice interface. The transmit TLP refers to the analog-to-digital level. The valid aluVoicePortTlpTx range for em 'fourWires' mode is -160 to +70. The valid aluVoicePortTlpTx range for em 'twoWires' mode is -100 to +60. For fxo and fxs ports: - valid range is -40 to +30 in 1db increments - default value is 0 To change aluVoicePortTlpTx, the port must be shutdown. " DEFVAL { 0 } ::= { aluVoicePortEntry 5 } aluVoicePortLineBalance OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), short (1), -- less than 200 Ohms long (2), -- greater than 200 Ohms nominal (3), -- 600 Ohms eightHundred (4) -- 800 Ohms//(100 Ohms+50nF) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluVoicePortLineBalance specifies the line balance on a given voice interface. This object is valid for fxo and fxs ports only. Valid values for fxo and fxs ports: nominal (default) eightHundred To change aluVoicePortLineBalance, the port must be shutdown. " ::= { aluVoicePortEntry 6 } aluVoicePortRingGeneration OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), none (1), freq16 (2), freq20 (3), freq25 (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluVoicePortRingGeneration specifies the frequency (in Hz) of the generated ring signal. This object is valid for fxs ports only. " DEFVAL { freq16 } ::= { aluVoicePortEntry 7 } aluVoicePortSignalingType OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), privateLineAutomaticRingdown3600 (1), -- 3600PLAR privateLineAutomaticRingdown1511 (2), -- 1511PLAR loopStart3600 (3), -- 3600LS profileOne1511 (4), -- 1511Profile1 remoteExtension3600 (5), -- 3600RE fifteenElevenSigSel137 (6) -- 1511SN137 } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluVoicePortSignalingType specifies how the signaling leads operate to establish a call. This object is valid for fxo and fxs ports only. privateLineAutomaticRingdown3600 - Does not involve exchange. When subscriber 1 goes off-hook, cadenced ringing occurs at subscriber 2. Subscriber 2 answers call by going off-hook. privateLineAutomaticRingdown1511 - same description as for 3600PLAR but ABCD bits differ loopStart3600 - Subscriber applies loop current to seize the line. Central office signals idle throughout the entire call and does not provide answer supervision. profileOne1511 - same as 3600LS but ABCD bits differ remoteExtension3600 - Subscriber seizes the line by closing loop. Exchange signals idle throughout the entire call and does not provide answer supervision. Subscriber can apply a recall signal by connecting the B lead to earth. fifteenElevenSigSel137 - aka Exchange_transp Valid values for fxo ports: loopStart3600 (muLaw only; default) profileOne1511 ( aLaw only) remoteExtension3600 ( aLaw only; default) fifteenElevenSigSel137 ( aLaw only) Valid values for fxs ports: privateLineAutomaticRingdown3600 privateLineAutomaticRingdown1511 ( aLaw only) loopStart3600 (muLaw only; default) profileOne1511 ( aLaw only) remoteExtension3600 ( aLaw only; default) fifteenElevenSigSel137 ( aLaw only) To change aluVoicePortSignalingType, the port must be shutdown. " ::= { aluVoicePortEntry 8 } -- -- ALU Voice table -- aluVoiceTable OBJECT-TYPE SYNTAX SEQUENCE OF AluVoiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "aluVoiceTable has an entry for each Voice channel on an IOM card in each chassis in the system. " ::= { aluPortObjs 8 } aluVoiceEntry OBJECT-TYPE SYNTAX AluVoiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Voice channel on an IOM card in a chassis in the system. Channel entries for voice ports can be created and deleted via SNMP SET operations. For each aluVoiceEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. " INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluVoiceTable 1 } AluVoiceEntry ::= SEQUENCE { aluVoiceRowStatus RowStatus, aluVoiceLastChangeTime TimeStamp, aluVoiceType INTEGER, aluVoiceSignalingMode INTEGER, aluVoiceLoopback INTEGER, aluVoiceFaultSignaling INTEGER, aluVoiceSignalBitsState OCTET STRING, aluVoiceClockSource TmnxDSXClockSource, aluVoiceSignalingLeadE AluVoiceSignalingLead, aluVoiceSignalingLeadM AluVoiceSignalingLead, aluVoiceSignalingLeadsState OCTET STRING, aluVoiceSignalMode INTEGER, aluVoiceCallState INTEGER, aluVoiceIncomingCallCount Counter32, aluVoiceIncomingCallCountAns Counter32, aluVoiceIncomingCallTime Counter32, aluVoiceIncomingCallTimeAns Counter32, aluVoiceOutgoingCallCount Counter32, aluVoiceOutgoingCallCountAns Counter32, aluVoiceOutgoingCallTime Counter32, aluVoiceOutgoingCallTimeAns Counter32, aluVoiceOutOfServiceTime Counter32, aluVoiceIdleTime Counter32, aluVoiceTotalCallCount Counter32, aluVoiceTotalCallTime Counter32, aluVoiceIdleCode Unsigned32, aluVoiceSeizedCode Unsigned32 } aluVoiceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceRowStatus controls the creation and deletion of row entries in the aluVoiceTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme. " ::= { aluVoiceEntry 1 } aluVoiceLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "aluVoiceLastChangeTime contains the sysUpTime value of the most recently modified writable variable in the aluVoiceEntry row for this Voice channel. " ::= { aluVoiceEntry 2 } aluVoiceType OBJECT-TYPE SYNTAX INTEGER { em (1), fxo (2), fxs (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluVoiceType indicates the channel type." ::= { aluVoiceEntry 3 } aluVoiceSignalingMode OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), em (1), transmissionOnly (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceSignalingMode configures the channel's signaling mode for E&M or transmission only. This object is valid for em channels only. transmissionOnly is not allowed when any port in the port trio is twoWires. For example, if port 1 is twoWires, then the channels under ports 1, 2 and 3 cannot be set to transmissionOnly. aluVoiceSignalingMode is not allowed to differ from other channels in the port trio. For example, if the channel under port 1 is transmissionOnly, then the channels under port 2 and port 3 must also be transmissionOnly. aluVoiceSignalingMode cannot be changed if a channel-group already exists for the port. Changing to em results in defaulting of aluVoiceFaultSignaling, aluVoiceSignalingLeadE, aluVoiceSignalingLeadM, aluVoiceIdleCode and aluVoiceSeizedCode. " DEFVAL { em } ::= { aluVoiceEntry 4 } aluVoiceLoopback OBJECT-TYPE SYNTAX INTEGER { none (1), internalAnalog (2), internalDigital (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceLoopback is used to put the port into a loopback mode. Only internal loopbacks are supported. 'internalAnalog' (aka Loopback B) is located on the analag side of the CODEC. 'internalDigital' (aka Loopback A) is located on the digital side of the CODEC. 'internalAnalog' is closer to the line-side than 'internalDigital'. The value 'internalAnalog' is valid for em channels only. " DEFVAL { none } ::= { aluVoiceEntry 5 } aluVoiceFaultSignaling OBJECT-TYPE SYNTAX INTEGER { idle (1), seized (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceFaultSignaling is used to configure fault signaling as idle or seized. The idle code is defined by aluVoiceIdleCode. The seized code is defined by aluVoiceSeizedCode. This object is invalid for em channels whose aluVoiceSignalingMode is 'transmissionOnly'. " DEFVAL { idle } ::= { aluVoiceEntry 6 } aluVoiceSignalBitsState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "aluVoiceSignalBitsState is an array of two bytes used to indicate the current state of the ABCD signalling bits for the voice channel. The first byte of the array describes the RX ABCD bits. The second byte of the array describes the TX ABCD bits. The byte arrangement is as follows: array index: | 0 1 | | RX TX | Each byte carries ABCD bits in the least significant nibble. The byte's most significant bit indicates the validity of the ABCD bits. The bit arrangement is as follows: bit pos: | 7 6 5 4 3 2 1 0 | | V x x x A B C D | 'V' - validity (0 = invalid, 1 = valid) 'x' - don't care ABCD bits are marked invalid for a variety of situations (eg. channel-group not configured, channel status not up, etc.). " ::= { aluVoiceEntry 7 } aluVoiceClockSource OBJECT-TYPE SYNTAX TmnxDSXClockSource MAX-ACCESS read-only STATUS current DESCRIPTION "aluVoiceClockSource indicates the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential'). Only 'nodeTimed' is supported. " ::= { aluVoiceEntry 8 } aluVoiceSignalingLeadE OBJECT-TYPE SYNTAX AluVoiceSignalingLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceSignalingLeadE is an output (or drive) lead. This object is valid for em channels only. This object is invalid for em channels whose aluVoiceSignalingMode is 'transmissionOnly'. " DEFVAL { end-to-end } ::= { aluVoiceEntry 9 } aluVoiceSignalingLeadM OBJECT-TYPE SYNTAX AluVoiceSignalingLead MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceSignalingLeadM is an input (or scan) lead. This object is valid for em channels only. This object is invalid for em channels whose aluVoiceSignalingMode is 'transmissionOnly'. " DEFVAL { end-to-end } ::= { aluVoiceEntry 10 } aluVoiceSignalingLeadsState OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "aluVoiceSignalingLeadsState is an array of two bytes used to indicate the current state of the output (or drive) and input (or scan) signaling leads (AluVoiceSignalingLead). This object is valid for em channels only. This object is invalid for em channels whose aluVoiceSignalingMode is 'transmissionOnly'. The byte arrangement is as follows: byte array index: | 0 1 | signaling lead: | M E | Each byte represents the state of the respective signaling lead. Valid byte values are: 1 = ON (or high as per AluVoiceSignalingLead) 2 = OFF (or low as per AluVoiceSignalingLead) All other byte values are undefined. " ::= { aluVoiceEntry 11 } aluVoiceSignalMode OBJECT-TYPE SYNTAX INTEGER { none (1), cas (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluVoiceSignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. aluVoiceSignalMode is just like tmnxDS1SignalMode except that it's read-only. " ::= { aluVoiceEntry 12 } aluVoiceCallState OBJECT-TYPE SYNTAX INTEGER { unknown (0), outOfService (1), idle (2), incoming (3), outgoing (4), nonForwarding (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the voice circuit." ::= { aluVoiceEntry 13 } aluVoiceIncomingCallCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming calls (received by the circuit). This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 14 } aluVoiceIncomingCallCountAns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming calls (received by the circuit) that were answered. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 15 } aluVoiceIncomingCallTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total duration (in seconds) of all incoming calls. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 16 } aluVoiceIncomingCallTimeAns OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total duration (in seconds) of all incoming calls that were answered. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 17 } aluVoiceOutgoingCallCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outgoing calls (originated by the circuit). This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 18 } aluVoiceOutgoingCallCountAns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outgoing calls (originated by the circuit) that were answered. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 19 } aluVoiceOutgoingCallTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total duration (in seconds) of all outgoing calls. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 20 } aluVoiceOutgoingCallTimeAns OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The total duration (in seconds) of all outgoing calls that were answered. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 21 } aluVoiceOutOfServiceTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds for which the circuit was unavailable for connection. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 22 } aluVoiceIdleTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds for which the circuit was idle. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 23 } aluVoiceTotalCallCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of aluVoiceIncomingCallCount and aluVoiceOutgoingCallCount. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 24 } aluVoiceTotalCallTime OBJECT-TYPE SYNTAX Counter32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of aluVoiceIncomingCallTime and aluVoiceOutgoingCallTime. This count is accumulated since the last time the statistics were cleared. " ::= { aluVoiceEntry 25 } aluVoiceIdleCode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the code transmitted on the signaling path when the channel is configured to transmit idle fault signaling. It's also used for driving/scanning the E&M signaling leads. This object is valid for em channels only. For fxo and fxs, the value is assigned internally by the system. The object is a bitmap arranged as follows: bit pos: | 7 6 5 4 3 2 1 0 | | x x x x A B C D | 'x' - don't care The default value depends on aluExtTmnxMDAVoiceCompandingLaw: For muLaw - 0 (or 0x0 or 0b0000) For aLaw - 13 (or 0xD or 0b1101) This object is invalid for em channels whose aluVoiceSignalingMode is 'transmissionOnly'. " ::= { aluVoiceEntry 26 } aluVoiceSeizedCode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-create STATUS current DESCRIPTION "This object contains the code transmitted on the signaling path when the channel is configured to transmit seized fault signaling. It's also used for driving/scanning the E&M signaling leads. This object is valid for em channels only. For fxo and fxs, the value is assigned internally by the system. The object is a bitmap arranged as follows: bit pos: | 7 6 5 4 3 2 1 0 | | x x x x A B C D | 'x' - don't care The default value depends on aluExtTmnxMDAVoiceCompandingLaw: For muLaw - 15 (or 0xF or 0b1111) For aLaw - 5 (or 0x5 or 0b0101) This object is invalid for em channels whose aluVoiceSignalingMode is 'transmissionOnly'. " ::= { aluVoiceEntry 27 } -- -- Voice Channel Group Table -- aluVoiceChanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AluVoiceChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluVoiceChanGroupTable has an entry for a single 64kbps (DS0) channel belonging to a particular Voice channel. " ::= { aluPortObjs 9 } aluVoiceChanGroupEntry OBJECT-TYPE SYNTAX AluVoiceChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents one or more Voice channels on an interface. Entries can be created and deleted via SNMP SET operations using the aluVoiceChanGroupRowStatus object. For each aluVoiceChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. " INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluVoiceChanGroupTable 1 } AluVoiceChanGroupEntry ::= SEQUENCE { aluVoiceChanGroupRowStatus RowStatus, aluVoiceChanGroupMTU Unsigned32, aluVoiceChanGroupOperMTU Unsigned32 } aluVoiceChanGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluVoiceChanGroupRowStatus controls the creation and deletion of row entries in the aluVoiceChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme." ::= { aluVoiceChanGroupEntry 1 } aluVoiceChanGroupMTU OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. aluVoiceChanGroupMTU cannot be modified as only encap-type cem is supported. The predetermined default value will always be reflected. " ::= { aluVoiceChanGroupEntry 2 } aluVoiceChanGroupOperMTU OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent." ::= { aluVoiceChanGroupEntry 3 } -- -- ALU GPON Port Table -- aluGponPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluGponPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluGponPortTable has an entry for every GPON port in the system." ::= { aluPortObjs 10 } aluGponPortEntry OBJECT-TYPE SYNTAX AluGponPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical GPON port on an IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a GPON MDA type. The aluGponPortEntry contains attributes that are unique to the 'GPON' tmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each aluGponPortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluGponPortTable 1 } AluGponPortEntry ::= SEQUENCE { aluGponPortG984SerialNumber OCTET STRING, aluGponPortSubsLocId OCTET STRING, aluGponPortActiveSwVersion OCTET STRING, aluGponPortPonStatus INTEGER, aluGponPortOntEnetStatus INTEGER, aluGponPortOntEnetSpeed INTEGER } aluGponPortG984SerialNumber OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the ONT's G.984 Serial Number of the ONT. From a display standpoint, it should be interpreted as follows: 1st 4 bytes are ASCII Vendor ID, and 2nd 4 bytes are a 32 bit number (which gets displayed as 8 ASCII characters). " ::= { aluGponPortEntry 1 } aluGponPortSubsLocId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..10)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Subscriber Location ID (SLID) that is sent to the OLT via the G.984.3 password PLOAM message. Contains the binary representation of the 10-byte SLID that will be sent on the next reboot." ::= { aluGponPortEntry 2 } aluGponPortActiveSwVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..14)) MAX-ACCESS read-only STATUS current DESCRIPTION "The active software version running on the GPON port's ONT." ::= { aluGponPortEntry 3 } aluGponPortPonStatus OBJECT-TYPE SYNTAX INTEGER { shutdown (0), active (1), hardwareFailure (2), softwareFailure (3), lossOfLink (4), softwareDownload (5), omciNotEstablished (6), boot (7), ranging (8), busy (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The aluGponPortPonStatus indicates the current status of the PON." ::= { aluGponPortEntry 4 } aluGponPortOntEnetStatus OBJECT-TYPE SYNTAX INTEGER { noLink (0), active (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operational status of the ONT's Ethernet interface." ::= { aluGponPortEntry 5 } aluGponPortOntEnetSpeed OBJECT-TYPE SYNTAX INTEGER { undefined (0), halfDuplex10Mbps (1), fullDuplex10Mbps (2), halfDuplex100Mbps (3), fullDuplex100Mbps (4), halfDuplex1Gbps (5), fullDuplex1Gbps (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operational speed of the ONT's Ethernet interface." ::= { aluGponPortEntry 6 } -- -- ALU DSL Port Table -- aluDslPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluDslPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluDslPortTable has an entry for every DSL port in the system." ::= { aluPortObjs 11 } aluDslPortEntry OBJECT-TYPE SYNTAX AluDslPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a backplane ethernet DSL port on an IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a p8-xdsl or p6-dsl MDA type. The aluDslPortEntry contains attributes that are unique to the 'XDSL' or 'SHDSL' tmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each aluDslPortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluDslPortTable 1 } AluDslPortEntry ::= SEQUENCE { aluDslPortBondingType AluDslTpsTcType, aluDslPortBondingState INTEGER, aluDslPortBondingBitRateUS Unsigned32, aluDslPortBondingBitRateDS Unsigned32, aluDslPortAtmVpi INTEGER, aluDslPortAtmVci INTEGER, aluDslPortAtmF5OamLoopback INTEGER, aluDslPortAtmF5OamLoopbackStatus INTEGER, aluDslPortAtmF5OamLoopbackTime Unsigned32, aluDslPortNtrDslLineID INTEGER, aluDslPortNtrLockedStatus INTEGER, aluDslPortNtrStdDev Unsigned32, aluDslPortNtrMaxError INTEGER, aluDslPortNtrMinError INTEGER, aluDslPortAdsl2Plus INTEGER, aluDslPortNtrSampleClockPeriod INTEGER, aluDslPortNtrErrorHistory OCTET STRING } aluDslPortBondingType OBJECT-TYPE SYNTAX AluDslTpsTcType MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortBondingType indicates the bonding type of the DSL port." ::= { aluDslPortEntry 1 } aluDslPortBondingState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortBondingState indicates the bonding opretional state of the DSL port. The 'up' state indicates that the bonding group can be used for passing traffic." ::= { aluDslPortEntry 2 } aluDslPortBondingBitRateUS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortBondingBitRateUS indicates the upstream bonding bit rate, unit is 1Kpbs." ::= { aluDslPortEntry 3 } aluDslPortBondingBitRateDS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortBondingBitRateDS indicates the downstream bonding bit rate, unit is 1Kpbs." ::= { aluDslPortEntry 4 } aluDslPortAtmVpi OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The aluDslPortAtmVpi indicates the Vpi for the bonding group. It is only used when the aluDslPortBondingType is 'atm'." DEFVAL { 8 } ::= { aluDslPortEntry 5 } aluDslPortAtmVci OBJECT-TYPE SYNTAX INTEGER (32..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "aluDslPortAtmVci indicates the Vci for the bonding group. The minimum value is 32, values 0 to 31 are reserved for other uses by the ITU and ATM Forum. It is only used when the aluDslPortBondingType is 'atm'." DEFVAL { 35 } ::= { aluDslPortEntry 6 } aluDslPortAtmF5OamLoopback OBJECT-TYPE SYNTAX INTEGER { none (0), active (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "aluDslPortAtmF5OamLoopback is used to generate an CPE initiated F5 OAM loopback cell on an ATM bonding type DSL port . The aluDslPortAtmF5OamLoopback always starts in the none(0) state until an explicit management action causes a transition to the active(1) state. When active(1), an F5 ATM OAM cell is initiated and sent to PEER. The state goes back to none when a loopback cell is received from PEER or a default 10-seconds times out. When active(1), setting aluDslPortAtmF5OamLoopback to none is not allowed. It is applicable only when the aluDslPortBondingType is 'atm'." DEFVAL { none } ::= { aluDslPortEntry 7 } aluDslPortAtmF5OamLoopbackStatus OBJECT-TYPE SYNTAX INTEGER { none (0), fail (1), pass (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluDslPortAtmF5OamLoopbackStatus is used to indicate the F5 loopback test result. It is applicable only when the value of tmnxPortType is 'XDSL' and the aluDslPortBondingType is 'atm'." DEFVAL { none } ::= { aluDslPortEntry 8 } aluDslPortAtmF5OamLoopbackTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluDslPortAtmF5OamLoopbackTime is used to indicate the round-trip time , in ms, for the ATM F5 Loopback testing. It is applicable only when the value of tmnxPortType is 'XDSL' and the aluDslPortBondingType is 'atm'." DEFVAL { 0 } ::= { aluDslPortEntry 9 } aluDslPortNtrDslLineID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrDslLineID indicates the DSL physical line controlling the NTR. The value of '0' indicates that the NTR is not available on the port" DEFVAL { 0 } ::= { aluDslPortEntry 10 } aluDslPortNtrLockedStatus OBJECT-TYPE SYNTAX INTEGER { acquringLock (0), preLock (1), lock (2), notSelected (3), freeRunning (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrLockedStatus indicates that NTR status." DEFVAL { freeRunning } ::= { aluDslPortEntry 11 } aluDslPortNtrStdDev OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrStdDev indicates the standard deviation, or one sigma, over a 10 second period of the phase error between the encoded phase information (as present in the NTR field of the overhead frame) and the CPE regenerated NTR clock. This therefore indicates the standard deviation of the phase error between the CO NTR clock and the CPE regenerated NTR clock. It is expressed in nanoseconds. It is applicable only when the value of tmnxPortType is 'XDSL'." DEFVAL { 0 } ::= { aluDslPortEntry 12 } aluDslPortNtrMaxError OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrMaxError indicates the maximum phase error, after lock has been declared, between the encoded phase information (as present in the NTR field of the overhead frame) and the CPE regenerated NTR clock. This therefore indicates the maximum phase error between the CO NTR clock and the CPE regenerated NTR clock. It is expressed in nanoseconds. It is applicable only when the value of tmnxPortType is 'XDSL'." DEFVAL { 0 } ::= { aluDslPortEntry 13 } aluDslPortNtrMinError OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrMinError indicates the minimum phase error, after lock has been declared, between the encoded phase information (as present in the NTR field of the overhead frame) and the CPE regenerated NTR clock. This therefore indicates the minimum phase error between the CO NTR clock and the CPE regenerated NTR clock. It is expressed in nanoseconds. It is applicable only when the value of tmnxPortType is 'XDSL'." DEFVAL { 0 } ::= { aluDslPortEntry 14 } aluDslPortAdsl2Plus OBJECT-TYPE SYNTAX INTEGER { g992Dot5a (0), g992Dot5b (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The aluDslPortAdsl2Plus indicates the support of G992.5 Annex A operations which are specific to POTS (g992Dot5a), or support of G992.5 ISDN operations over ADSL2+ (g992Dot5b). It is applicable only when the value of tmnxPortType is 'XDSL'." DEFVAL { g992Dot5a } ::= { aluDslPortEntry 15 } aluDslPortNtrSampleClockPeriod OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrSampleClockPeriod indicates the sample clock period for NTR in nanoseconds. This number multiplied by the aluDslPortNtrErrorHistory value results in the phase error in nanoseconds between the encoded phase information (as present in the NTR field of the overhead frame) and the CPE regenerated NTR clock. It is applicable only when the value of tmnxPortType is 'XDSL'." DEFVAL { 0 } ::= { aluDslPortEntry 16 } aluDslPortNtrErrorHistory OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDslPortNtrErrorHistory is an array of bytes used to indicate phase error history. Each byte represents the phase error between the encoded phase information (as present in the NTR field of the overhead frame) and the CPE regenerated NTR clock. Therefore each byte indicates the phase error between the CO NTR clock and the CPE regenerated NTR clock. These values are expressed in clock ticks based on the aluDslPortNtrSampleClockPeriod. The time interval between bytes in this array is 1/16 of a second It is applicable only when the value of tmnxPortType is 'XDSL'." ::= { aluDslPortEntry 17 } -- -- ALU XDSL Line Table -- aluXdslLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AluXdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluXdslLineTable has an entry for every physical XDSL line in the system." ::= { aluPortObjs 12 } aluXdslLineEntry OBJECT-TYPE SYNTAX AluXdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical XDSL line on an DSL module in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a p8-xdsl or p6-dsl MDA type. The aluXdslLineEntry contains attributes that are unique to the XDSL physical lines. " INDEX { tmnxChassisIndex, tmnxPortPortID, aluXdslLineID } ::= { aluXdslLineTable 1 } AluXdslLineEntry ::= SEQUENCE { aluXdslLineID Unsigned32, aluXdslLineOperState INTEGER, aluXdslLineState INTEGER, aluXdslLineProtocol INTEGER, aluXdslLineVdslProfile INTEGER, aluXdslLineTpsTcType AluDslTpsTcType, aluXdslLineInBondingGroup TruthValue, aluXdslLineBitRateUS Unsigned32, aluXdslLineSnrMarginUS INTEGER, aluXdslLineOutputPowerUS INTEGER, aluXdslLineRefPsdUS INTEGER, aluXdslLineLoopDelayUS INTEGER, aluXdslLineFailureUS Unsigned32, aluXdslLineB0DelayUS Unsigned32, aluXdslLineB0InpUS Unsigned32, aluXdslLineBitRateDS Unsigned32, aluXdslLineSnrMarginDS INTEGER, aluXdslLineOutputPowerDS INTEGER, aluXdslLineRefPsdDS INTEGER, aluXdslLineLoopDelayDS INTEGER, aluXdslLineFailureDS Unsigned32, aluXdslLineB0DelayDS Unsigned32, aluXdslLineB0InpDS Unsigned32, aluXdslLineAdminState AluDslAdminState } aluXdslLineID OBJECT-TYPE SYNTAX Unsigned32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "When aluXdslLineID is used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a specified physical XDSL line in the managed system. " ::= { aluXdslLineEntry 1 } aluXdslLineOperState OBJECT-TYPE SYNTAX INTEGER { down (0), up (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the operational state of the XDSL line. The 'up' state indicates that the DSL line can be used for passing traffic. For 'ptm' TPS-TC XDSL line, the aluXdslLineOperState is up when the line state goes to 'runShow' and the line is in a bonding group. For 'atm' TPS-TC XDSL line, the aluXdslLineOperState is up when the line state goes to 'runShow' and the line is also available for bonding through G.998.1 protocol." ::= { aluXdslLineEntry 2 } aluXdslLineState OBJECT-TYPE SYNTAX INTEGER { idlNcon (0), idlConf (1), runActi (2), runInit (3), runShow (4), tstMode (5), runLdInit (6), idlLdDone (7), runShowL2 (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the state of the XDSL line retrieved from BCM6519." ::= { aluXdslLineEntry 3 } aluXdslLineProtocol OBJECT-TYPE SYNTAX INTEGER { none (-1), proc9921a (0), proc9921b (1), proc9921c (2), proc9922a (3), proc9922c (4), proc9921h (5), proc9921i (6), proc9932 (7), proc9912a (8), proc9912b (9), proc9923a (16), proc9923b (17), proc9923i (18), proc9923m (19), proc9923j (20), proc9924i (21), proc9923l1 (22), proc9923l2 (23), proc9925a (24), proc9925b (25), proc9925i (26), proc9925m (27), proc9925j (28), sadsl (29), ansi (30), etsi (31), proc9932v (32), proc9935 (33) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the protocol of the XDSL line retrieved from BCM6519." DEFVAL { none } ::= { aluXdslLineEntry 4 } aluXdslLineVdslProfile OBJECT-TYPE SYNTAX INTEGER { none (0), profile8a (1), profile8b (2), profile8c (3), profile8d (4), profile12a (5), profile12b (6), profile17a (7), profile30a (8), unknown (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the VDSL profile of the XDSL line retrieved from BCM6519." DEFVAL { none } ::= { aluXdslLineEntry 5 } aluXdslLineTpsTcType OBJECT-TYPE SYNTAX AluDslTpsTcType MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the TPS-TC of the XDSL line retrieved from BCM6519." ::= { aluXdslLineEntry 6 } aluXdslLineInBondingGroup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates if the line belongs to bonding group on the DSL Port" ::= { aluXdslLineEntry 7 } aluXdslLineBitRateUS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the upstream line bit rate, unit is 1Kpbs. It is retrieved from BCM6519." ::= { aluXdslLineEntry 8 } aluXdslLineSnrMarginUS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the upstream SNR margin (expressed in tenth of dB's). It is retrieved from BCM6519." ::= { aluXdslLineEntry 9 } aluXdslLineOutputPowerUS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the upstream transmit power (expressed in tenth of dBm's). It is retrieved from BCM6519." ::= { aluXdslLineEntry 10 } aluXdslLineRefPsdUS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the upstream ref psd = nomial PSD - power cutback (expressed in tenths of dB's). It applies to ADSL ptotocols only. It is retrieved from BCM6519." ::= { aluXdslLineEntry 11 } aluXdslLineLoopDelayUS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current loop group delay, only measured in VDSL. US: delay as measured on RMSG1 = actual loop delay DS: delay as measured on R-P-TRAINING1 = residual after application of timing advance expressed in samples at 35.328MHz. It is retrieved from BCM6519." ::= { aluXdslLineEntry 12 } aluXdslLineFailureUS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is bit mask giving the set of current active failure on the upstream line. The value is retrieved from BCM6519. A failure is declared when the corresponding defect is active for more than 2.5 (+ or - 0.5) sec. A failure is cleared when the corresponding defect is off for at least 10.5 (+ or - 0.5) sec. The bit index and corresponding failures are: Bit[1]: Set when unavailable time is counted Bit[2]: Set when the modem is not in the RUNNING_SHOWTIME state Bit[6]: Loss of ATM cell or PTM packet delineation, bearer B0 Bit[7]: Loss of ATM cell or PTM packet delineation, bearer B1 Bit[12]: Loss of signal Bit[13]: Loss of frame Bit[14]: No ATM cell or PTM packet delineation, bearer B0 Bit[15]: No ATM cell or PTM packet delineation, bearer B1 Bit[18]: Loss of power Bit[24]: CONFIG_ERROR Bit[25]: HIGH_BIT_RATE Bit[26]: COMM_PROBLEM Bit[27]: NO_PEER_DETECTED Bit[28]: Set when the loss of margin failure is set (when the SNR margin drops below the minimum SNR margin for more than 20 consective seconds). Bit[29]: Set when the line leaves Showtime because the L3 state is requested by the CO or CPE. " ::= { aluXdslLineEntry 13 } aluXdslLineB0DelayUS OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current delay incurred on the upstream B0 latency path, expressed in milliseconds. The value is retrieved from BCM6519." ::= { aluXdslLineEntry 14 } aluXdslLineB0InpUS OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current INP protection achived on the upstream B0 latency path, Unit is 1/2 symbol. The value is retrieved from BCM6519." ::= { aluXdslLineEntry 15 } aluXdslLineBitRateDS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the downstream line bit rate, unit is 1Kpbs. It is retrieved from BCM6519." ::= { aluXdslLineEntry 16 } aluXdslLineSnrMarginDS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the downstream SNR margin (expressed in tenth of dB's). It is retrieved from BCM6519." ::= { aluXdslLineEntry 17 } aluXdslLineOutputPowerDS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the downstream transmit power (expressed in tenth of dBm's). It is retrieved from BCM6519." ::= { aluXdslLineEntry 18 } aluXdslLineRefPsdDS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the downstream ref psd = nomial PSD - power cutback (expressed in tenths of dB's). It applies to ADSL ptotocols only. It is retrieved from BCM6519." ::= { aluXdslLineEntry 19 } aluXdslLineLoopDelayDS OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current loop group delay, only measured in VDSL. US: delay as measured on RMSG1 = actual loop delay DS: delay as measured on R-P-TRAINING1 = residual after application of timing advance expressed in samples at 35.328MHz. It is retrieved from BCM6519." ::= { aluXdslLineEntry 20 } aluXdslLineFailureDS OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is bit mask giving the set of current active failure on the downstream line. The value is retrieved from BCM6519. A failure is declared when the corresponding defect is active for more than 2.5 (+ or - 0.5) sec. A failure is cleared when the corresponding defect is off for at least 10.5 (+ or - 0.5) sec. The bit index and corresponding failures are: Bit[1]: Set when unavailable time is counted Bit[2]: Set when the modem is not in the RUNNING_SHOWTIME state Bit[6]: Loss of ATM cell or PTM packet delineation, bearer B0 Bit[7]: Loss of ATM cell or PTM packet delineation, bearer B1 Bit[12]: Loss of signal Bit[13]: Loss of frame Bit[14]: No ATM cell or PTM packet delineation, bearer B0 Bit[15]: No ATM cell or PTM packet delineation, bearer B1 Bit[18]: Loss of power Bit[24]: CONFIG_ERROR Bit[25]: HIGH_BIT_RATE Bit[26]: COMM_PROBLEM Bit[27]: NO_PEER_DETECTED Bit[28]: Set when the loss of margin failure is set (when the SNR margin drops below the the minimum SNR margin for more than 20 consective seconds). Bit[29]: Set when the line leaves Showtime because the L3 state is requested by the CO or CPE. " ::= { aluXdslLineEntry 21 } aluXdslLineB0DelayDS OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current delay incurred on the downstream B0 latency path, expressed in milliseconds. The value is retrieved from BCM6519." ::= { aluXdslLineEntry 22 } aluXdslLineB0InpDS OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current INP protection achived on the downstream B0 latency path, Unit is 1/2 symbol. The value is retrieved from BCM6519." ::= { aluXdslLineEntry 23 } aluXdslLineAdminState OBJECT-TYPE SYNTAX AluDslAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the desired administrative status of this DSL Line" DEFVAL { inService } ::= { aluXdslLineEntry 24 } -- -- ALU SHDSL Line Status Table -- aluShdslLineTable OBJECT-TYPE SYNTAX SEQUENCE OF AluShdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluShdslLineTable has an entry for every SHDSL line in the system." ::= { aluPortObjs 13 } aluShdslLineEntry OBJECT-TYPE SYNTAX AluShdslLineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical SHDSL line on an DSL module in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a p6-dsl MDA type. The aluShdslLineEntry contains attributes that are unique to the SHDSL physical lines. " INDEX { tmnxChassisIndex, tmnxPortPortID, aluShdslLineID } ::= { aluShdslLineTable 1 } AluShdslLineEntry ::= SEQUENCE { aluShdslLineID Unsigned32, aluShdslLineDataRate Unsigned32, aluShdslLineState INTEGER, aluShdslLineNegotiatedConst INTEGER, aluShdslLineUsedCaplist INTEGER, aluShdslLineRegion INTEGER, aluShdslLineCaplistMode INTEGER, aluShdslLineTpsTcType AluDslTpsTcType, aluShdslLineInBondingGroup TruthValue, aluShdslLineAdminState AluDslAdminState, aluShdslLineLineAttenuation Unsigned32, aluShdslLineRxSNRMargin INTEGER, aluShdslLinePowerBackOffValue Unsigned32 } aluShdslLineID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "When aluShdslLineID is used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a SHDSL line in the managed system." ::= { aluShdslLineEntry 1 } aluShdslLineDataRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current data rate of the PMD in units of 1kbs Note: This parameter is only valid if link is in UP_DATA_MODE." ::= { aluShdslLineEntry 2 } aluShdslLineState OBJECT-TYPE SYNTAX INTEGER { downNotReady (0), downReady (1), stopDownReady (2), initializing (3), upDateMode (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current state" ::= { aluShdslLineEntry 3 } aluShdslLineNegotiatedConst OBJECT-TYPE SYNTAX INTEGER { pmd16TcPAM (0), pmd32TcPAM (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Negotiated Constellation. Note: This parameter is only valid if link is in UP_DATA_MODE." ::= { aluShdslLineEntry 4 } aluShdslLineUsedCaplist OBJECT-TYPE SYNTAX INTEGER { newStyleCapList (0), oldStyleCapList (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Negotiated Constellation. Note: This parameter is only valid if link is in UP_DATA_MODE." ::= { aluShdslLineEntry 5 } aluShdslLineRegion OBJECT-TYPE SYNTAX INTEGER { annexAF (0), annexBG (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Region Information Note: This parameter is only valid if link is in UP_DATA_MODE." ::= { aluShdslLineEntry 6 } aluShdslLineCaplistMode OBJECT-TYPE SYNTAX INTEGER { newStyleCapList (0), oldStyleCapList (1), autoCapList (2), autoTcDetect (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Capability List Mode." ::= { aluShdslLineEntry 7 } aluShdslLineTpsTcType OBJECT-TYPE SYNTAX AluDslTpsTcType MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates the TPS-TC of the physical SHDSL line." ::= { aluShdslLineEntry 8 } aluShdslLineInBondingGroup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates if the line belongs to bonding group on the DSL Port" ::= { aluShdslLineEntry 9 } aluShdslLineAdminState OBJECT-TYPE SYNTAX AluDslAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the desired administrative status of this DSL Line" DEFVAL { inService } ::= { aluShdslLineEntry 10 } aluShdslLineLineAttenuation OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Line Attenuation in dB (Network Side). The local STU-R value is updated every second when the link is active." ::= { aluShdslLineEntry 11 } aluShdslLineRxSNRMargin OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "RX SNR Margin (Network Side). The local STU-R value is updated every second when the link is active." ::= { aluShdslLineEntry 12 } aluShdslLinePowerBackOffValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Power Back-Off Value (Network Side). The local STU-R value in dB is updated every second when the link is active." ::= { aluShdslLineEntry 13 } -- -- Nokia 7705 Frame-relay Interface Stats Table -- -- Augmententation of tmnxFrIntfTable in TIMETRA-PORT-MIB -- aluFrIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluFrIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table is used to gather the additional statistics for Nokia 7705 SAR series devices on a particular frame relay Interface." ::= { aluPortStatsObjs 11 } aluFrIfStatsEntry OBJECT-TYPE SYNTAX AluFrIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics collected on a single frame relay Interface." AUGMENTS { tmnxFrIntfEntry } ::= { aluFrIfStatsTable 1 } AluFrIfStatsEntry ::= SEQUENCE { aluFrIfRxFrames Counter64, aluFrIfRxOctets Counter64, aluFrIfRxDEFrames Counter64, aluFrIfRxDEOctets Counter64, aluFrIfRxFECNFrames Counter64, aluFrIfRxBECNFrames Counter64, aluFrIfTxFrames Counter64, aluFrIfTxOctets Counter64, aluFrIfTxDEFrames Counter64, aluFrIfTxDEOctets Counter64, aluFrIfTxFECNFrames Counter64, aluFrIfTxBECNFrames Counter64, aluFrIfRxDiscardsInvalidDlci Counter64, aluFrIfRxLastInvalidDlci Counter64, aluFrIfRxDiscardsCrcErrors Counter64, aluFrIfRxDiscardsAlignmentErrors Counter64, aluFrIfRxDiscardsLengthViolations Counter64, aluFrIfRxDiscardsIllegalHeader Counter64, aluFrIfRxDiscardsOtherErrors Counter64, aluFrIfTxDiscardsUnderruns Counter64, aluFrIfTxDiscardsOtherErrors Counter64 } aluFrIfRxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received on this interface" ::= { aluFrIfStatsEntry 1 } aluFrIfRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets received on this interface" ::= { aluFrIfStatsEntry 2 } aluFrIfRxDEFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DE=1 frames received on this interface" ::= { aluFrIfStatsEntry 3 } aluFrIfRxDEOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DE=1 octets received on this interface" ::= { aluFrIfStatsEntry 4 } aluFrIfRxFECNFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FECN frames received on this interface" ::= { aluFrIfStatsEntry 5 } aluFrIfRxBECNFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BECN frames received on this interface" ::= { aluFrIfStatsEntry 6 } aluFrIfTxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames sent on this interface" ::= { aluFrIfStatsEntry 7 } aluFrIfTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets sent on this interface" ::= { aluFrIfStatsEntry 8 } aluFrIfTxDEFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DE=1 frames sent on this interface" ::= { aluFrIfStatsEntry 9 } aluFrIfTxDEOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DE=1 octets sent on this interface" ::= { aluFrIfStatsEntry 10 } aluFrIfTxFECNFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FECN frames sent on this interface" ::= { aluFrIfStatsEntry 11 } aluFrIfTxBECNFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of BECN frames sent on this interface" ::= { aluFrIfStatsEntry 12 } aluFrIfRxDiscardsInvalidDlci OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received frames with invalid or unsupported DLCI." ::= { aluFrIfStatsEntry 13 } aluFrIfRxLastInvalidDlci OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The DLCI of the last received frames with an invalid DLCI." ::= { aluFrIfStatsEntry 14 } aluFrIfRxDiscardsCrcErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The received crc errors." ::= { aluFrIfStatsEntry 15 } aluFrIfRxDiscardsAlignmentErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The received alignment errors." ::= { aluFrIfStatsEntry 16 } aluFrIfRxDiscardsLengthViolations OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The received length errors." ::= { aluFrIfStatsEntry 17 } aluFrIfRxDiscardsIllegalHeader OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The received frames with illegal header " ::= { aluFrIfStatsEntry 18 } aluFrIfRxDiscardsOtherErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The other received errors" ::= { aluFrIfStatsEntry 19 } aluFrIfTxDiscardsUnderruns OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit Underruns." ::= { aluFrIfStatsEntry 20 } aluFrIfTxDiscardsOtherErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The other transmit errors" ::= { aluFrIfStatsEntry 21 } -- -- Nokia 7705 Frame-relay Circuit Table -- -- Augmententation of frCircuitTable in FRAME-RELAY-DTE-MIB -- -- aluExtFrCircuitTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtFrCircuitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing stats information about specific Data Link Connections (DLC) or virtual circuits." ::= { aluPortStatsObjs 12 } aluExtFrCircuitEntry OBJECT-TYPE SYNTAX AluExtFrCircuitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The stats information regarding a single Data Link Connection." AUGMENTS { frCircuitEntry } ::= { aluExtFrCircuitTable 1 } AluExtFrCircuitEntry ::= SEQUENCE { aluExtFrCircuitReceivedCrcDiscards Counter32, aluExtFrCircuitReceivedAborts Counter32, aluExtFrCircuitReceivedOtherDiscards Counter32, aluExtFrCircuitSentAborts Counter32, aluExtFrCircuitSentFECNs Counter32, aluExtFrCircuitSentBECNs Counter32, aluExtFrCircuitReceivedDEOctets Counter32, aluExtFrCircuitSentDEOctets Counter32 } aluExtFrCircuitReceivedCrcDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound frames dropped because of Crc errors." ::= { aluExtFrCircuitEntry 1 } aluExtFrCircuitReceivedAborts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound frames dropped due to insufficient buffer resource." ::= { aluExtFrCircuitEntry 2 } aluExtFrCircuitReceivedOtherDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound frames dropped because of other errors." ::= { aluExtFrCircuitEntry 3 } aluExtFrCircuitSentAborts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound frames dropped because of format errors, or because the VC is inactive." ::= { aluExtFrCircuitEntry 4 } aluExtFrCircuitSentFECNs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames sent to the network indicating forward congestion since the virtual circuit was created. This occurs when transmission queue is congested or when frames sent with FECN flage set." ::= { aluExtFrCircuitEntry 5 } aluExtFrCircuitSentBECNs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames sent to the network indicating backward congestion since the virtual circuit was created. This occurs when frames sent with FECN flags set." ::= { aluExtFrCircuitEntry 6 } aluExtFrCircuitReceivedDEOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data." ::= { aluExtFrCircuitEntry 7 } aluExtFrCircuitSentDEOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets sent to the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the local DTE sets the DE flag, indicating that during Network congestion situations those frames should be discarded in preference of other frames sent without the DE bit set." ::= { aluExtFrCircuitEntry 8 } -- -- Port PTP Transparent Clock Packet Statistics Table -- aluEthPtpTimestampStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluEthPtpTimestampStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series port IEEE1588 PTP Transparent Clock packet statistics table for providing, via SNMP, the capability of retrieving statistical information relating to packets that are timestamped." ::= { aluPortStatsObjs 13 } aluEthPtpTimestampStatsEntry OBJECT-TYPE SYNTAX AluEthPtpTimestampStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluEthPtpTimestampStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluEthPtpTimestampStatsTable 1 } AluEthPtpTimestampStatsEntry ::= SEQUENCE { aluEthPtpInSyncPktTimestamped Counter64, aluEthPtpOutSyncPktTimestamped Counter64, aluEthPtpInDelReqPktTimestamped Counter64, aluEthPtpOutDelReqPktTimestamped Counter64, aluEthPtpInFcsErrorCount Counter64, aluEthPtpOutFcsErrorCount Counter64, aluEthPtpOutFollowUpPktTimestamped Counter64 } aluEthPtpInSyncPktTimestamped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the number of ingress Sync packets that have been timestamped." ::= { aluEthPtpTimestampStatsEntry 1 } aluEthPtpOutSyncPktTimestamped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the number of egress Sync packets that have been timestamped." ::= { aluEthPtpTimestampStatsEntry 2 } aluEthPtpInDelReqPktTimestamped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the number of ingress Delay Request packets that have been timestamped." ::= { aluEthPtpTimestampStatsEntry 3 } aluEthPtpOutDelReqPktTimestamped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the number of egress Delay Request packets that have been timestamped." ::= { aluEthPtpTimestampStatsEntry 4 } aluEthPtpInFcsErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicate the number of ingress packets that contained FCS Error." ::= { aluEthPtpTimestampStatsEntry 5 } aluEthPtpOutFcsErrorCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Indicate the number of egress packets that contained FCS Error." ::= { aluEthPtpTimestampStatsEntry 6 } aluEthPtpOutFollowUpPktTimestamped OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the number of egress Follow-Up packets that have been transmitted." ::= { aluEthPtpTimestampStatsEntry 7 } -- -- Add-drop Network Ring Port Stats Table -- aluPortNetRingAddDropStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortNetRingAddDropStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia 7705 series network add-drop ring port statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the ring add-drop port queues." ::= { aluPortStatsObjs 14 } aluPortNetRingAddDropStatsEntry OBJECT-TYPE SYNTAX AluPortNetRingAddDropStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluPortNetRingAddDropStatsTable. Entries are created and deleted by the system depending on the add-drop port queue policy being used at the specific port." INDEX { tmnxChassisIndex, tmnxPortPortID, aluPortNetRingAddDropQueueIndex } ::= { aluPortNetRingAddDropStatsTable 1 } AluPortNetRingAddDropStatsEntry ::= SEQUENCE { aluPortNetRingAddDropQueueIndex TQueueId, aluPortNetRingAddDropFwdInProfPkts Counter64, aluPortNetRingAddDropFwdOutProfPkts Counter64, aluPortNetRingAddDropFwdInProfOcts Counter64, aluPortNetRingAddDropFwdOutProfOcts Counter64, aluPortNetRingAddDropDroInProfPkts Counter64, aluPortNetRingAddDropDroOutProfPkts Counter64, aluPortNetRingAddDropDroInProfOcts Counter64, aluPortNetRingAddDropDroOutProfOcts Counter64 } aluPortNetRingAddDropQueueIndex OBJECT-TYPE SYNTAX TQueueId (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "aluPortNetRingAddDropQueueIndex serves as the tertiary index. When used in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely identifies a network ring add-drop queue for the specified port in the managed system." ::= { aluPortNetRingAddDropStatsEntry 1 } aluPortNetRingAddDropFwdInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropFwdInProfPkts indicates the number of conforming network add-drop packets forwarded on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 2 } aluPortNetRingAddDropFwdOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropFwdOutProfPkts indicates the number of exceeding network add-drop packets forwarded on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 3 } aluPortNetRingAddDropFwdInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropFwdInProfOcts indicates the number of conforming network add-drop octets forwarded on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 4 } aluPortNetRingAddDropFwdOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropFwdOutProfOcts indicates the number of exceeding network add-drop octets forwarded on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 5 } aluPortNetRingAddDropDroInProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropDroInProfPkts indicates the number of conforming network add-drop packets dropped on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 6 } aluPortNetRingAddDropDroOutProfPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropDroOutProfPkts indicates the number of exceeding network add-drop packets dropped on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 7 } aluPortNetRingAddDropDroInProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropDroInProfOcts indicates the number of conforming network add-drop octets dropped on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 8 } aluPortNetRingAddDropDroOutProfOcts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPortNetRingAddDropDroOutProfOcts indicates the number of exceeding network add-drop octets dropped on this port using this queue." ::= { aluPortNetRingAddDropStatsEntry 9 } aluPortNgeL2KeygroupStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortNgeL2KeygroupStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia 7705 series Network Group Encryption port-level statistics." ::= { aluPortStatsObjs 15 } aluPortNgeL2KeygroupStatsEntry OBJECT-TYPE SYNTAX AluPortNgeL2KeygroupStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the aluPortNgeL2KeygroupStatsTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPortNgeL2KeygroupStatsTable 1 } AluPortNgeL2KeygroupStatsEntry ::= SEQUENCE { aluPortNgeL2KeygroupTxFrames Counter64, aluPortNgeL2KeygroupTxBytes Counter64, aluPortNgeL2KeygroupRxFrames Counter64, aluPortNgeL2KeygroupRxBytes Counter64, aluPortNgeL2KGRxDropOtherFrames Counter64, aluPortNgeL2KGRxDropOtherBytes Counter64, aluPortNgeL2KeygroupTxDropFrames Counter64, aluPortNgeL2KeygroupTxDropBytes Counter64, aluPortNgeL2KGRxDrpInvldSpiFrms Counter64, aluPortNgeL2KGRxDrpInvldSpiBytes Counter64 } aluPortNgeL2KeygroupTxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of egress Ethernet frames that have been encrypted." ::= { aluPortNgeL2KeygroupStatsEntry 1 } aluPortNgeL2KeygroupTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of egress Ethernet bytes that have been encrypted." ::= { aluPortNgeL2KeygroupStatsEntry 2 } aluPortNgeL2KeygroupRxFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ingress Ethernet frames that have been decrypted." ::= { aluPortNgeL2KeygroupStatsEntry 3 } aluPortNgeL2KeygroupRxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ingress Ethernet bytes that have been decrypted." ::= { aluPortNgeL2KeygroupStatsEntry 4 } aluPortNgeL2KGRxDropOtherFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ingress Ethernet frames that have been dropped." ::= { aluPortNgeL2KeygroupStatsEntry 5 } aluPortNgeL2KGRxDropOtherBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ingress Ethernet bytes that have been dropped." ::= { aluPortNgeL2KeygroupStatsEntry 6 } aluPortNgeL2KeygroupTxDropFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of egress Ethernet frames that have been dropped." ::= { aluPortNgeL2KeygroupStatsEntry 7 } aluPortNgeL2KeygroupTxDropBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of egress Ethernet bytes that have been dropped." ::= { aluPortNgeL2KeygroupStatsEntry 8 } aluPortNgeL2KGRxDrpInvldSpiFrms OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ingress Ethernet frames that have been dropped due to invalid SPI." ::= { aluPortNgeL2KeygroupStatsEntry 9 } aluPortNgeL2KGRxDrpInvldSpiBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of ingress Ethernet bytes that have been dropped due to invalid SPI." ::= { aluPortNgeL2KeygroupStatsEntry 10 } aluRS232SocketStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluRS232SocketStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluRS232SocketStatsTable contains an entry for each Serial socket channel that exists in the system. Each row contains traffic and event counters." ::= { aluPortStatsObjs 16 } aluRS232SocketStatsEntry OBJECT-TYPE SYNTAX AluRS232SocketStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in the aluRS232SocketStatsTable. Entries are created and deleted by the system depending on the port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluRS232SocketStatsTable 1 } AluRS232SocketStatsEntry ::= SEQUENCE { aluRS232SocketRxChars Counter64, aluRS232SocketTxChars Counter64, aluRS232SocketEopIdleTimeoutCnt Counter64, aluRS232SocketEopLengthCnt Counter64, aluRS232SocketEopSpecialCharCnt Counter64, aluRS232SocketIngrForwardedPkts Counter64, aluRS232SocketEgrForwardedPkts Counter64, aluRS232SocketIngrDroppedPkts Counter64, aluRS232SocketEgrDroppedPkts Counter64, aluRS232SocketSquelchCnt Counter32 } aluRS232SocketRxChars OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketRxChars indicates the number of characters received from the Serial data stream." ::= { aluRS232SocketStatsEntry 1 } aluRS232SocketTxChars OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketTxChars indicates the number of characters transmitted to the Serial data stream." ::= { aluRS232SocketStatsEntry 2 } aluRS232SocketEopIdleTimeoutCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketEopIdleTimeoutCnt indicates the number of times an end of packet event occurred due to idle timeout." ::= { aluRS232SocketStatsEntry 3 } aluRS232SocketEopLengthCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketEopLengthCnt indicates the number of times an end of packet event occurred due to length." ::= { aluRS232SocketStatsEntry 4 } aluRS232SocketEopSpecialCharCnt OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketEopSpecialCharCnt indicates the number of times an end of packet event occurred due to special character." ::= { aluRS232SocketStatsEntry 5 } aluRS232SocketIngrForwardedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketIngrForwardedPkts indicates the number of packets (constructed from the incoming Serial data stream) that were successfully forwarded." ::= { aluRS232SocketStatsEntry 6 } aluRS232SocketEgrForwardedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketIngrForwardedPkts indicates the number of packets (destined for the outgoing Serial data stream) that were successfully forwarded." ::= { aluRS232SocketStatsEntry 7 } aluRS232SocketIngrDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketIngrDroppedPkts indicates the number of packets (constructed from the incoming Serial data stream) that were dropped due to errors." ::= { aluRS232SocketStatsEntry 8 } aluRS232SocketEgrDroppedPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketEgrDroppedPkts indicates the number of packets (destined for the outgoing Serial data stream) that were dropped due to errors." ::= { aluRS232SocketStatsEntry 9 } aluRS232SocketSquelchCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketSquelchCnt indicates the number of times squelch has been activated." ::= { aluRS232SocketStatsEntry 10 } -- -- ALU Data Port table -- aluDataPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluDataPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluDataPortTable has an entry for a physical Data port." ::= { aluPortObjs 14 } aluDataPortEntry OBJECT-TYPE SYNTAX AluDataPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical Data port on an IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a Data MDA type. The aluDataPortEntry contains attributes that are unique to the Data TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each aluDataPortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluDataPortTable 1 } AluDataPortEntry ::= SEQUENCE { aluDataPortLastChangeTime TimeStamp, aluDataPortType INTEGER } aluDataPortLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluDataPortLastChangeTime indicates the sysUpTime of the most recently modified writable variable in the aluDataPortEntry row for this port. " ::= { aluDataPortEntry 1 } aluDataPortType OBJECT-TYPE SYNTAX INTEGER { codir (1), tpif (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluDataPortType specifies the interface-type of the physical port. " DEFVAL { codir } ::= { aluDataPortEntry 2 } -- -- ALU Data table -- aluDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AluDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "aluDataTable has an entry for each Data channel on an IOM card in each chassis in the system. " ::= { aluPortObjs 15 } aluDataEntry OBJECT-TYPE SYNTAX AluDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Data channel on an IOM card in a chassis in the system. Channel entries for Data ports can be created and deleted via SNMP SET operations. For each aluDataEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. " INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluDataTable 1 } AluDataEntry ::= SEQUENCE { aluDataRowStatus RowStatus, aluDataLastChangeTime TimeStamp, aluDataType INTEGER, aluDataClockSource TmnxDSXClockSource, aluDataTiming8k TmnxEnabledDisabled, aluDataReportAlarm AluDataReportStatus, aluDataReportAlarmStatus AluDataReportStatus, aluDataLoopback INTEGER } aluDataRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluDataRowStatus controls the creation and deletion of row entries in the aluDataTable. For row creation, the manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme. " ::= { aluDataEntry 1 } aluDataLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluDataLastChangeTime indicates the sysUpTime of the most recently modified writable variable in the aluDataEntry row for this Data channel. " ::= { aluDataEntry 2 } aluDataType OBJECT-TYPE SYNTAX INTEGER { codir (1), tpif (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluDataType indicates the channel type." ::= { aluDataEntry 3 } aluDataClockSource OBJECT-TYPE SYNTAX TmnxDSXClockSource MAX-ACCESS read-only STATUS current DESCRIPTION "aluDataClockSource indicates the clock for transmitted data from either the internal clock ('nodeTimed'), or from a clock recovered from the line's receive data stream ('loopTimed'), or recovered adaptively from the rate at which the data that is received and not from the physical layer ('adaptive'), or recovered from the differential timestamp in the RTP header ('differential'). Only 'nodeTimed' is supported. " ::= { aluDataEntry 4 } aluDataTiming8k OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluDataTiming8k specifies whether to generate the 8k timing signal while the channel's service is NOT operational. This object is valid for codir channels only. " DEFVAL { disabled } ::= { aluDataEntry 5 } aluDataReportAlarm OBJECT-TYPE SYNTAX AluDataReportStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluDataReportAlarm determines when and if to generate aluEqPortDataAlarm and aluEqPortDataAlarmClear notifications for this channel. Valid bits for codir ports: ais (default) los (default) Valid bits for tpif ports: los (default) rai (default) " ::= { aluDataEntry 6 } aluDataReportAlarmStatus OBJECT-TYPE SYNTAX AluDataReportStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluDataReportAlarmStatus indicates the current alarms on this channel." ::= { aluDataEntry 7 } aluDataLoopback OBJECT-TYPE SYNTAX INTEGER { none (1), internal (2), line (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluDataLoopback specifies the loopback mode of the Data interface. An 'internal' loopback loops frames from the local system back at the framer. A 'line' loopback loops frames received on this port back to the remote system. " DEFVAL { none } ::= { aluDataEntry 8 } -- -- Data Channel Group Table -- aluDataChanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AluDataChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluDataChanGroupTable has an entry for 64kbps (DS0) channels grouped together and belonging to a particular Data channel." ::= { aluPortObjs 16 } aluDataChanGroupEntry OBJECT-TYPE SYNTAX AluDataChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents one or more Data channels on an interface. Entries can be created and deleted via SNMP SET operations using the aluDataChanGroupRowStatus object. For each aluDataChanGroupEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable. " INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluDataChanGroupTable 1 } AluDataChanGroupEntry ::= SEQUENCE { aluDataChanGroupRowStatus RowStatus, aluDataChanGroupLastChangeTime TimeStamp, aluDataChanGroupMTU Unsigned32, aluDataChanGroupOperMTU Unsigned32, aluDataChanGroupPayloadFillType TmnxDSXIdleFillType, aluDataChanGroupPayloadPattern Unsigned32, aluDataChanGroupTimeSlots TmnxDs0ChannelList } aluDataChanGroupRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluDataChanGroupRowStatus controls the creation and deletion of row entries in the aluDataChanGroupTable. The tmnxPortPortID for a channel group includes a group ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme." ::= { aluDataChanGroupEntry 1 } aluDataChanGroupLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The aluDataChanGroupLastChangeTime variable contains the sysUpTime value of the most recently modified writable variable in the aluDataChanGroupEntry row for this channel group." ::= { aluDataChanGroupEntry 2 } aluDataChanGroupMTU OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the largest packet which can be sent/received on the channel group, specified in octets. For groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent. aluDataChanGroupMTU cannot be modified as only encap-type cem is supported. The predetermined default value will always be reflected. " ::= { aluDataChanGroupEntry 3 } aluDataChanGroupOperMTU OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated size of the largest packet which can be sent on the channel group, specified in octets. For channel groups that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent." ::= { aluDataChanGroupEntry 4 } aluDataChanGroupPayloadFillType OBJECT-TYPE SYNTAX TmnxDSXIdleFillType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluDataChanGroupPayloadFillType specifies the type of idle payload fill to be sent when the CEM channel group experiences an underrun. This object is valid for codir channels only. If the type is set to 'userDefinedPattern' then the value of aluDataChanGroupPayloadPattern is used to define the payload pattern. The default value depends on the encap type of the channel group: For CEM encap - 'allOnes' For all other encaps - 'notApplicable' " DEFVAL { notApplicable } ::= { aluDataChanGroupEntry 5 } aluDataChanGroupPayloadPattern OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluDataChanGroupPayloadPattern specifies the idle payload fill pattern when the CEM channel group experiences an underrun and aluDataChanGroupPayloadFillType is set to 'userDefinedPattern'. This object is valid for codir channels only. The default value depends on the encap type of the channel group: For CEM encap channel group - 255 (Valid range 0..255) For non-CEM encap channel group - 0 (Valid range 0..0)." DEFVAL { 0 } ::= { aluDataChanGroupEntry 6 } aluDataChanGroupTimeSlots OBJECT-TYPE SYNTAX TmnxDs0ChannelList MAX-ACCESS read-create STATUS current DESCRIPTION "aluDataChanGroupTimeSlots is a bitmap which is used to add/remove DS0 timeslots from a channel group. The description for TmnxDs0ChannelList contains details of the bitmap organization. This object specifies the number of CONSECUTIVE timeslot(s) to be associated with the channel group. The value must start from the first timeslot. The value represents line bandwidth (N x 64kbps). For codir, the value cannot be changed from the first timeslot. For tpif, the value can range from 1 to 12 timeslots. The default value is the first timeslot, 0x00000001." ::= { aluDataChanGroupEntry 7 } -- -- ALU Extensions of tmnxDS0ChanGroupTable -- aluExtTmnxDS0ChanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtTmnxDS0ChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluExtTmnxDS0ChanGroupTable has an entry for DS0 channels grouped together and belonging to a particular DS0/E1 channel" ::= { aluPortObjs 17 } aluExtTmnxDS0ChanGroupEntry OBJECT-TYPE SYNTAX AluExtTmnxDS0ChanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the extended functionality of a DS0 channel group. Entries cannot be created and deleted via SNMP SET operations. It will be automatically created or deleted when an tmnxDS0ChanGroupEntry is created/deleted." AUGMENTS { tmnxDS0ChanGroupEntry } ::= { aluExtTmnxDS0ChanGroupTable 1 } AluExtTmnxDS0ChanGroupEntry ::= SEQUENCE { aluExtDS0ChanGroupSignalMode INTEGER, aluExtDS0ChanGroupLoopback INTEGER } aluExtDS0ChanGroupSignalMode OBJECT-TYPE SYNTAX INTEGER { none (1), cas (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluExtDS0ChanGroupSignalMode indicates the type of signalling associated with the channel: none - Indicates no signalling on this channel. cas - Indicates Channel Associated Signalling (CAS) on this channel. The default signalling is 'none'. " DEFVAL { none } ::= { aluExtTmnxDS0ChanGroupEntry 1 } aluExtDS0ChanGroupLoopback OBJECT-TYPE SYNTAX INTEGER { none (0), line (1), internal (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluExtDS0ChanGroupLoopback specifies the type of loopback applied to the DS0 channel group. The value of tmnxPortAdminStatus should be set to 'outOfService' prior to applying loopback. none - no loopback applied line - loops ingress traffic back to the remote system internal - loops egress traffic back to the local system " DEFVAL { none } ::= { aluExtTmnxDS0ChanGroupEntry 2 } -- -- ALU Extensions of pethPsePortTable -- aluExtPethPsePortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtPethPsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluExtPethPsePortTable has an entry for a table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device." ::= { aluPortObjs 18 } aluExtPethPsePortEntry OBJECT-TYPE SYNTAX AluExtPethPsePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the extended functionality of a power Ethernet port" AUGMENTS { pethPsePortEntry } ::= { aluExtPethPsePortTable 1 } AluExtPethPsePortEntry ::= SEQUENCE { aluExtPethPsePortFaultReason INTEGER, aluExtPethPsePortPowerLevel INTEGER, aluExtPethPsePortPowerConsumption Unsigned32, aluExtPethPsePortMaximumPower Unsigned32 } aluExtPethPsePortFaultReason OBJECT-TYPE SYNTAX INTEGER { none (1), dcp (2), hicap (3), rlow (4), detok (5), rhigh (6), open (7), dcn (8), tstart (9), icv (10), tcut (11), dis (12), sup (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reason for a detection status failure: none (1) dcp (2) - Positive DC supply connected at the port hicap (3) - High Capacitance at the port rlow (4) - Low Resistance at the port detok (5) - detection ok rhigh (6) - High resistance at the port open (7) - open circuit dcn (8) - Low impedence to Vee at the port tstart (9) - Startup failure at the port icv (10) - Current limit disconnect timeout at the port tcut (11) - Overcurrent and current limit violation at the port dis (12) - DC load disconnect sup (13) - Supply fault at the PSE device" DEFVAL { none } ::= { aluExtPethPsePortEntry 1 } aluExtPethPsePortPowerLevel OBJECT-TYPE SYNTAX INTEGER { none (1), standard (2), plus (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "none (1) The interface does not provide the power ethernet function. standard (2) The interface provides the standard power ethernet power level. plus (3) The interface provides the higher power 'Poe Plus' PSE function" DEFVAL { plus } ::= { aluExtPethPsePortEntry 2 } aluExtPethPsePortPowerConsumption OBJECT-TYPE SYNTAX Unsigned32 UNITS "Milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "The power consumption of the port expressed in milliwatts." ::= { aluExtPethPsePortEntry 3 } aluExtPethPsePortMaximumPower OBJECT-TYPE SYNTAX Unsigned32 UNITS "Milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum power available to the port expressed in milliwatts." ::= { aluExtPethPsePortEntry 4 } -- -- ALU Extensions of Tmnx Port table -- aluExtPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtTmnxPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluExtPortTable has an entry for port in the chassis." ::= { aluPortObjs 19 } aluExtTmnxPortEntry OBJECT-TYPE SYNTAX AluExtTmnxPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents extended functionality of a port on Nokia 7705 SAR devices. Entries cannot be created or deleted via SNMP SET operations. Entries in this table will be created or deleted automatically when entries in the tmnxPortTable are created or deleted." AUGMENTS { tmnxPortEntry } ::= { aluExtPortTable 1 } AluExtTmnxPortEntry ::= SEQUENCE { aluExtPortSsmTxQualityLevel INTEGER } aluExtPortSsmTxQualityLevel OBJECT-TYPE SYNTAX INTEGER { unknown (0), prs (1), stu (2), st2 (3), tnc (4), st3e (5), st3 (6), smc (7), st4 (8), dus (9), prc (10), ssua (11), ssub (12), sec (13), dnu (14), inv (15), pno (16), eec1 (17), eec2 (18), failed (19) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortSsmTxQualityLevel indicates the SSM quality level of transmitted SSM messages. On ports not supporting SSM, or not transmitting SSM messages, the quality level will be 'unknown (0)'. The values 'prs (1)' through 'dus (9)' and 'pno (16)' correspond to quality levels defined in GR-253-CORE. The values 'prc (10)' through 'inv (15)' correspond to quality levels defined in G.781. The values 'eec1 (17)' and 'eec2 (18)' correspond to quality levels defines in G.8264." REFERENCE "Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3, September 2000, 5.4.2. ITU-T Recommendation G.781, June 1999. ITU-T Recommendation G.8264, October 2008." DEFVAL { unknown } ::= { aluExtTmnxPortEntry 1 } -- -- ALU Scada Bridge table -- aluScadaBridgeTable OBJECT-TYPE SYNTAX SEQUENCE OF AluScadaBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluScadaBridgeTable has an entry for a Scada Bridge." ::= { aluPortObjs 20 } aluScadaBridgeEntry OBJECT-TYPE SYNTAX AluScadaBridgeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Scada bridge in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to the SCADA MDA type. The aluScadaBridgeEntry contains attributes that are unique to the Scada bridge. The port ID contains the slot, mda and bridge id(1-10) encoded into it." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluScadaBridgeTable 1 } AluScadaBridgeEntry ::= SEQUENCE { aluScadaBridgeType INTEGER, aluScadaBridgeAdminStatus INTEGER, aluScadaBridgeOperStatus INTEGER, aluScadaBridgeDescription TItemLongDescription, aluScadaBridgeName TNamedItemOrEmpty } aluScadaBridgeType OBJECT-TYPE SYNTAX INTEGER { mddb (1), pcm (2), vcb (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluScadaBridgeType indicates the type of the scada bridge. Due to FPGA limitations, all scada bridges on a SCADA card must be the same type. The type is determined by the mda mode, aluExtTmnxMDACapabilityMode." ::= { aluScadaBridgeEntry 1 } aluScadaBridgeAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (0), inService (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "aluScadaBridgeAdminStatus indicates the admin status of the scada bridge" ::= { aluScadaBridgeEntry 2 } aluScadaBridgeOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (0), inService (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluScadaBridgeOperStatus indicates the operational status of the scada bridge" ::= { aluScadaBridgeEntry 3 } aluScadaBridgeDescription OBJECT-TYPE SYNTAX TItemLongDescription MAX-ACCESS read-write STATUS current DESCRIPTION "A textual string containing user supplied information about the scada bridge." DEFVAL { ''H } ::= { aluScadaBridgeEntry 4 } aluScadaBridgeName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `1/1/1'." ::= { aluScadaBridgeEntry 5 } -- -- ALU Serial MDDB table -- aluSerialMddbTable OBJECT-TYPE SYNTAX SEQUENCE OF AluSerialMddbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "aluSerialMddbTable has an entry for each Serial MDDB port on each IOM card in each chassis in the system." ::= { aluPortObjs 21 } aluSerialMddbEntry OBJECT-TYPE SYNTAX AluSerialMddbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Serial MDDB in the system. Entries for serial mddbs can not be created and deleted via SNMP SET operations. The Entries are automatically created when the tmnxMDAAssignedType object is set to the SCADA MDA type and mode mode supports serail MDDB. For each aluSerialMddbEntry, there will be a corresponding entry in the aluScadaBridgeTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluSerialMddbTable 1 } AluSerialMddbEntry ::= SEQUENCE { aluSerialMddbReportAlarms AluRS232ReportStatus, aluSerialMddbForceActive INTEGER, aluSerialMddbSquelchStatus Unsigned32, aluSerialMddbSquelchEnable INTEGER, aluSerialMddbSquelchTimeout INTEGER, aluSerialMddbSquelchReset INTEGER, aluSerialMddbSpeed INTEGER, aluSerialMddbSquelchResetMode INTEGER, aluSerialMddbSquelchResetTimeout INTEGER, aluSerialMddbRedMode INTEGER } aluSerialMddbReportAlarms OBJECT-TYPE SYNTAX AluRS232ReportStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of aluSerialMddbReportAlarms determines if the the following alarms for branches belong to the Mddb should be monitored. hcmOof - Reports local HCM out-of-frame errors. hcmRai - Reports remote HCM alarm indication. ctrlLeadMon - (not supported) monClockDev - (not supported) monDataInac - (not supported) If enabled, the alarms will be show in aluScadaBranchAlarmStatus" DEFVAL { {hcmOof, hcmRai} } ::= { aluSerialMddbEntry 1 } aluSerialMddbForceActive OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-create STATUS current DESCRIPTION "aluSerialMddbForceActive forces the specified master branch to be active. default is the master branch 1. Not configurable in when aluSerialMddbRedMode is auto" DEFVAL { 1 } ::= { aluSerialMddbEntry 2 } aluSerialMddbSquelchStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluSerialMddbSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and each bit represent a branch. Bit with value one indicates that the associated branch is squelched." ::= { aluSerialMddbEntry 3 } aluSerialMddbSquelchEnable OBJECT-TYPE SYNTAX INTEGER { false (1), true (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "During nomal SCADA system operation, it is common for a single slave to lock-up and continue to send data after the allocated response time. To solve the problem, the bridge has a squelching function which will over-ride the incoming data on the locked up slave with all ones. aluSerialMddbSquelchEnable enables and disables squelching function for the specified MDDB. " DEFVAL { false } ::= { aluSerialMddbEntry 4 } aluSerialMddbSquelchTimeout OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-create STATUS current DESCRIPTION "The bridge will start squelching after a user-selectable time period. aluSerialMddbSquelchTimeout specifies such a period in seconds. It can only be set to value larger than zero. Value zero is an undefined value." DEFVAL { 1 } ::= { aluSerialMddbEntry 5 } aluSerialMddbSquelchReset OBJECT-TYPE SYNTAX INTEGER { noAction (1), action (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluSerialMddbSquelchReset is a one shot action used to reset the squelching." DEFVAL { noAction } ::= { aluSerialMddbEntry 6 } aluSerialMddbSpeed OBJECT-TYPE SYNTAX INTEGER { speed1200 (1), speed2400 (2), speed9600 (3), speed19200 (4), speed38400 (5), speed56000 (6), speed4800 (23), speed600 (24) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluSerialMddbSpeed specifies the speed of the Mddb. A value of 'speed1200' sets the bridge to 1200bps. These speed definitions are consistent with those used for RS232 port. The speed of the bridge should match to the speed configured on the RS232 port of the branches." DEFVAL { speed2400 } ::= { aluSerialMddbEntry 7 } aluSerialMddbSquelchResetMode OBJECT-TYPE SYNTAX INTEGER { manual (1), auto (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluSerialMddbResetMode specifies the method of re-enabling squelched branch. In manual mode, squelched branches can be only re-enabled when user sets aluSerialMddbSquelchReset. In auto mode, squelched branches will be re-enabled after a user defined timeout period." DEFVAL { manual } ::= { aluSerialMddbEntry 8 } aluSerialMddbSquelchResetTimeout OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-create STATUS current DESCRIPTION "aluSerialMddbResetTimeout specifies how long the squelched branches have to be remain squelched, after the squelch condition is cleared and before it can be re-enabled. It is only meaningful when aluSerialMddbResetMode is auto." DEFVAL { 1 } ::= { aluSerialMddbEntry 9 } aluSerialMddbRedMode OBJECT-TYPE SYNTAX INTEGER { manual (1), auto (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluSerialMddbRedMode specifies the redundant mode of the bridge. In auto mode, both master branches are active; one could be for voice and another one for data. In manual mode, only one master branch can be active; User can use aluSerialMddbForceActive to set a particular master as active." DEFVAL { manual } ::= { aluSerialMddbEntry 10 } -- -- Scada Bridge Member Table -- aluScadaBranchTable OBJECT-TYPE SYNTAX SEQUENCE OF AluScadaBranchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluScadaBranchTable has an entry for each branch belonging to a particular scada bridge." ::= { aluPortObjs 22 } aluScadaBranchEntry OBJECT-TYPE SYNTAX AluScadaBranchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents one branch on the bridge. Entries can be created and deleted via SNMP SET operations using the aluScadaBranchRowStatus object." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluScadaBranchTable 1 } AluScadaBranchEntry ::= SEQUENCE { aluScadaBranchRowStatus RowStatus, aluScadaBranchAdminStatus INTEGER, aluScadaBranchOperStatus INTEGER, aluScadaBranchMultiDrop INTEGER, aluScadaBranchAlarmStatus AluRS232ReportStatus, aluScadaBranchDescription TItemLongDescription, aluScadaBranchEncapType INTEGER, aluScadaBranchMode INTEGER, aluScadaBranchSquelch INTEGER, aluScadaBranchGainInput Integer32, aluScadaBranchGainOutput Integer32, aluScadaBranchGainSidetoneEnable TmnxEnabledDisabled, aluScadaBranchName TNamedItemOrEmpty } aluScadaBranchRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluScadaBranchRowStatus controls the creation and deletion of row entries in the aluScadaBranchTable. The tmnxPortPortID The port ID contains the slot, mda, bridge id and branch id encoded into it." ::= { aluScadaBranchEntry 1 } aluScadaBranchAdminStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (0), inService (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluScadaBranchAdminStatus indicates the admin status of the scada branch." ::= { aluScadaBranchEntry 2 } aluScadaBranchOperStatus OBJECT-TYPE SYNTAX INTEGER { outOfService (0), inService (1) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluScadaBranchOperStatus indicates the operational status of the scada branch" ::= { aluScadaBranchEntry 3 } aluScadaBranchMultiDrop OBJECT-TYPE SYNTAX INTEGER { slave (1), master (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "aluScadaBranchMultiDrop is used to specify the Multi-drop Data Bridge (Mddb) mode of the branch. Branch 1-2 are fixed to Master, and 3-32 are fixed to Slaves. This object is not applicable while aluExtTmnxMDACapabilityMode is 'modeC' (ie. VCB)." ::= { aluScadaBranchEntry 4 } aluScadaBranchAlarmStatus OBJECT-TYPE SYNTAX AluRS232ReportStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluScadaBranchAlarmStatus indicates the alarms on this scada branch. This object is not applicable while aluExtTmnxMDACapabilityMode is 'modeC' (ie. VCB)." ::= { aluScadaBranchEntry 5 } aluScadaBranchDescription OBJECT-TYPE SYNTAX TItemLongDescription MAX-ACCESS read-create STATUS current DESCRIPTION "A textual string containing user supplied information about the scada bridge branch." DEFVAL { ''H } ::= { aluScadaBranchEntry 6 } aluScadaBranchEncapType OBJECT-TYPE SYNTAX INTEGER { unknown (0), nullEncap (1), qEncap (2), mplsEncap (3), bcpNullEncap (4), bcpDot1qEncap (5), ipcpEncap (6), frEncap (7), pppAutoEncap (8), atmEncap (9), qinqEncap (10), wanMirrorEncap (11), ciscoHDLCEncap (12), cemEncap (13) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of encapsulation protocol configured on this branch. It scada bridge branch." DEFVAL { cemEncap } ::= { aluScadaBranchEntry 7 } aluScadaBranchMode OBJECT-TYPE SYNTAX INTEGER { undefined (0), access (1), network (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The aluScadaBranchMode indicates if the branch is configured as a service access or a network access." DEFVAL { access } ::= { aluScadaBranchEntry 8 } aluScadaBranchSquelch OBJECT-TYPE SYNTAX INTEGER { undefined (0), disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The aluScadaBranchSquelch indicates if the branch is enabled for squelch. If enabled, the bridge-level squelch needs to be enabled as well to take effect; default value is enabled for slaves and disabled for masters to allow a seemless upgrade for mddb branches. This object is invalid while aluExtTmnxMDACapabilityMode is 'modeC' (ie. VCB)." DEFVAL { disabled } ::= { aluScadaBranchEntry 9 } aluScadaBranchGainInput OBJECT-TYPE SYNTAX Integer32 (-160..90) UNITS "tenths of decibels" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluScadaBranchGainInput specifies the input gain for a given branch. This object is valid only while aluExtTmnxMDACapabilityMode is 'modeC' (ie. VCB). Although the units are in tenths of decibels, only increments of 1db are currently supported (eg. -160, -150, ..., 80, 90)." DEFVAL { 0 } ::= { aluScadaBranchEntry 10 } aluScadaBranchGainOutput OBJECT-TYPE SYNTAX Integer32 (-160..90) UNITS "tenths of decibels" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluScadaBranchGainOutput specifies the output gain for a given branch. This object is valid only while aluExtTmnxMDACapabilityMode is 'modeC' (ie. VCB). Although the units are in tenths of decibels, only increments of 1db are currently supported (eg. -160, -150, ..., 80, 90)." DEFVAL { 0 } ::= { aluScadaBranchEntry 11 } aluScadaBranchGainSidetoneEnable OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluScadaBranchGainSidetoneEnable specifies whether sidetone gain is to be applied for a given branch. This object is valid only while aluExtTmnxMDAVcbApplication is 'vcb'. " DEFVAL { disabled } ::= { aluScadaBranchEntry 12 } aluScadaBranchName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `1/1/1.1'." ::= { aluScadaBranchEntry 13 } -- -- Ethernet Loopback Vlan Table -- aluPortCfmLbVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortCfmLbVlanEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The aluPortCfmLbVlanTable has an entry for a vlan Id of the port that must have aluExtPortEtherLoopbackCfmLbMode set to priority-dot1p." ::= { aluPortObjs 23 } aluPortCfmLbVlanEntry OBJECT-TYPE SYNTAX AluPortCfmLbVlanEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry represents an acceptable vlan ID in the tag of incoming CFM LB frames destined to the ethernet port with tmnxPortPortID. Entries can be created and deleted via SNMP SET operations using the aluPortCfmLbVlanRowStatus object. " INDEX { tmnxChassisIndex, tmnxPortPortID, aluPortCfmLbVlanId } ::= { aluPortCfmLbVlanTable 1 } AluPortCfmLbVlanEntry ::= SEQUENCE { aluPortCfmLbVlanId Unsigned32, aluPortCfmLbVlanRowStatus RowStatus } aluPortCfmLbVlanId OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-create STATUS obsolete DESCRIPTION " aluPortCfmLbVlanId indicates the vlan ID of the ethernet port." ::= { aluPortCfmLbVlanEntry 1 } aluPortCfmLbVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of aluPortCfmLbVlanRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. 'createAndGo' can only be applied to ports with aluExtPortEtherLoopbackCfmLbMode set to priority-dot1p. When createAndGo is successful, the value of aluPortCfmLbVlanRowStatus becomes 'active'. Any incoming CFM LB frame destined for this tmnxPortPortID will get processed if it has no vlan tags or it has a vlan tag matched with aluPortCfmLbVlanId of an active row entry." ::= { aluPortCfmLbVlanEntry 2 } -- -- ALU GNSS Port table -- aluGnssPortTable OBJECT-TYPE SYNTAX SEQUENCE OF AluGnssPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluGnssPortTable has an entry for a physical GNSS port." ::= { aluPortObjs 24 } aluGnssPortEntry OBJECT-TYPE SYNTAX AluGnssPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a physical GNSS port on an IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Entries in this table will be created automatically when the tmnxMDAAssignedType object is set to a GNSS-capable MDA type. The aluGnssPortEntry contains attributes that are unique to the GNSS TmnxPortType. The tmnxPortPortID contains the slot, mda and port numbers encoded into it. For each aluGnssPortEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluGnssPortTable 1 } AluGnssPortEntry ::= SEQUENCE { aluGnssPortLastChangeTime TimeStamp, aluGnssPortType BITS, aluGnssPortAntennaCableDelay INTEGER, aluGnssPortElevationMaskAngle Integer32, aluGnssPortVisibleSatelliteCount Unsigned32, aluGnssPortUsedSatelliteCount Unsigned32, aluGnssPortAntennaStatus INTEGER, aluGnssPortSyncStatus INTEGER, aluGnssPortPositionLatitude INTEGER, aluGnssPortPositionLongitude INTEGER, aluGnssPortPositionAltitude INTEGER, aluGnssPortDateAndTime DateAndTime, aluGnssPortReceiverStatus DisplayString, aluGnssPortCurUtcOffset Integer32, aluGnssPortCurUtcOffsetValid TruthValue, aluGnssPortReceiverFwVersion DisplayString } aluGnssPortLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluGnssPortLastChangeTime indicates the sysUpTime at the time of the last modification of this entry." ::= { aluGnssPortEntry 1 } aluGnssPortType OBJECT-TYPE SYNTAX BITS { gps (0), glonass (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluGnssPortType specifies which constellation types the installed GNSS receiver module shall process." DEFVAL { {gps} } ::= { aluGnssPortEntry 2 } aluGnssPortAntennaCableDelay OBJECT-TYPE SYNTAX INTEGER (0..32767) UNITS "1 ns" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluGnssPortAntennaCableDelay specifies the antenna cable delay that has to be taken into account given the characteristics (eg. length) of the installed antenna cable." DEFVAL { 0 } ::= { aluGnssPortEntry 3 } aluGnssPortElevationMaskAngle OBJECT-TYPE SYNTAX Integer32 (0..89) UNITS "1 degree" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluGnssPortElevationMaskAngle specifies the the elevation mask angle. It provides a method of filtering satellites to be used by the system. Elevation angle is the angle above the horizon. When satellites are close to horizon, there is more atmosphere, troposphere, and ionosphere for the signals to go through (ie. more noise). Elevation angle mask determines the minimum elevation angle below which the GNSS receiver module will not use a satellite in its computations. Typical values are 10 and 15 degrees." DEFVAL { 10 } ::= { aluGnssPortEntry 4 } aluGnssPortVisibleSatelliteCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortVisibleSatelliteCount indicates the number of satellites currently 'seen' by the GNSS receiver module." ::= { aluGnssPortEntry 5 } aluGnssPortUsedSatelliteCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortUsedSatelliteCount indicates the number of satellites currently 'used' in computations by the GNSS receiver module." ::= { aluGnssPortEntry 6 } aluGnssPortAntennaStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), unsupported (2), ok (3), overCurrent (4), underCurrent (5), noBiasVoltage (6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortAntennaStatus indicates the status of the antenna." ::= { aluGnssPortEntry 7 } aluGnssPortSyncStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), locked (2), notLocked (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortSyncStatus indicates the status of the GNSS receiver module with respect to generating a sync-worthy clock signal." ::= { aluGnssPortEntry 8 } aluGnssPortPositionLatitude OBJECT-TYPE SYNTAX INTEGER (-9000000..9000000|134217727) UNITS "0.00001 decimal degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortPositionLatitude indicates the latitude of the antenna. Encoding: < 0: west of prime meridian = 0: at prime meridian > 0: east of prime meridian The unit corresponds to a resolution of approximately 1.11 metres. The default value is 134217727. It's considered invalid. It's used to signify that a surveyed (valid) position has yet to be determined." ::= { aluGnssPortEntry 9 } aluGnssPortPositionLongitude OBJECT-TYPE SYNTAX INTEGER (-18000000..18000000|134217727) UNITS "0.00001 decimal degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortPositionLongitude indicates the longitude of the antenna. Encoding: < 0: south of equator = 0: at equator > 0: north of equator The unit corresponds to a resolution of approximately 1.11 metres. The default value is 134217727. It's considered invalid. It's used to signify that a surveyed (valid) position has yet to be determined." ::= { aluGnssPortEntry 10 } aluGnssPortPositionAltitude OBJECT-TYPE SYNTAX INTEGER (-1000..10000|134217727) UNITS "1 metre" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortPositionAltitude indicates the altitude of the antenna. Encoding: < 0: below sea level = 0: at sea level > 0: above sea level The default value is 134217727. It's considered invalid. It's used to signify that a surveyed (valid) position has yet to be determined." ::= { aluGnssPortEntry 11 } aluGnssPortDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortDateAndTime indicates the current date and time as provided by the receiver module." ::= { aluGnssPortEntry 12 } aluGnssPortReceiverStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortReceiverStatus indicates the status of the GNSS receiver module." ::= { aluGnssPortEntry 13 } aluGnssPortCurUtcOffset OBJECT-TYPE SYNTAX Integer32 (-65536..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortCurUtcOffset indicates the current offset between GPS time and UTC in seconds, as provided by the GNSS receiver module. The value can be valid or invalid. See aluGnssPortCurUtcOffsetValid." ::= { aluGnssPortEntry 14 } aluGnssPortCurUtcOffsetValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortCurUtcOffsetValid indicates 'true (1)' if the aluGnssPortCurUtcOffset is known to be correct." ::= { aluGnssPortEntry 15 } aluGnssPortReceiverFwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluGnssPortReceiverFwVersion indicates the firmware version of the GNSS receiver module. The format of the value may differ between receiver modules. For example, one may return 2.28, another may return 2.02.0." ::= { aluGnssPortEntry 16 } aluPortScalarObjs OBJECT IDENTIFIER ::= { aluPortObjs 32 } aluLsrIpLoadBalBtmOfStk OBJECT-TYPE SYNTAX INTEGER { profile-1 (1), profile-2 (2), profile-3 (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluLsrIpLoadBalBtmOfStk specifies whether the is used in the LAG and ECMP LSR hashing algorithm. This is the global system setting that all ports will inherit." DEFVAL { profile-1 } ::= { aluPortScalarObjs 1 } aluLsrIpLoadBalIngressPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluLsrIpLoadBalIngressPort specifies whether ingress port is used in the LAG and ECMP hashing algorithm. This is the global system setting that all ports will inherit. When set to 'true', the ingress port is used in the hashing algorithm." DEFVAL { false } ::= { aluPortScalarObjs 2 } -- -- ALU PCM table -- aluPcmTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPcmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "aluPcmTable has an entry for each PCM bridge on each IOM card in each chassis in the system." ::= { aluPortObjs 25 } aluPcmEntry OBJECT-TYPE SYNTAX AluPcmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a PCM bridge in the system. Entries for serial pcms can not be created and deleted via SNMP SET operations. The Entries are automatically created when the tmnxMDAAssignedType object is set to the SCADA MDA type and mode mode supports PCM. For each aluPcmEntry, there will be a corresponding entry in the aluScadaBridgeTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluPcmTable 1 } AluPcmEntry ::= SEQUENCE { aluPcmForceActive INTEGER, aluPcmSquelchStatus Unsigned32, aluPcmSquelchEnable INTEGER, aluPcmSquelchTimeout INTEGER, aluPcmSquelchReset INTEGER, aluPcmSquelchResetMode INTEGER, aluPcmSquelchResetTimeout INTEGER, aluPcmRedMode INTEGER } aluPcmForceActive OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS read-create STATUS current DESCRIPTION "aluPcmForceActive forces the specified master branch to be active. default is the master branch 1." DEFVAL { 1 } ::= { aluPcmEntry 1 } aluPcmSquelchStatus OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "aluPcmSquelchStatus shows squelch status of the scada bridge. It is a 32-bit integer and each bit represent a branch. Bit with value one indicates that the associated branch is squelched." ::= { aluPcmEntry 2 } aluPcmSquelchEnable OBJECT-TYPE SYNTAX INTEGER { false (1), true (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "During nomal SCADA system operation, it is common for a single slave to lock-up and continue to send data after the allocated response time. To solve the problem, the bridge has a squelching function which will over-ride the incoming data on the locked up slave with all ones. aluPcmSquelchEnable enables and disables squelching function for the specified PCM. " DEFVAL { false } ::= { aluPcmEntry 3 } aluPcmSquelchTimeout OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-create STATUS current DESCRIPTION "The bridge will start squelching after a user-selectable time period." DEFVAL { 1 } ::= { aluPcmEntry 4 } aluPcmSquelchReset OBJECT-TYPE SYNTAX INTEGER { noAction (1), action (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluPcmSquelchReset is a one shot action used to reset the squelching." DEFVAL { noAction } ::= { aluPcmEntry 5 } aluPcmSquelchResetMode OBJECT-TYPE SYNTAX INTEGER { manual (1), auto (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluPcmResetMode specifies the method of re-enabling squelched branch. In manual mode, squelched branches will be re-enabled only when user sets aluPcmSquelchReset. In auto mode, squelched branches will be re-enabled after a user defined timeout period." DEFVAL { manual } ::= { aluPcmEntry 6 } aluPcmSquelchResetTimeout OBJECT-TYPE SYNTAX INTEGER (1..120) MAX-ACCESS read-create STATUS current DESCRIPTION "aluPcmResetTimeout specifies how long the squelched branches have to be remain squelched, after the squelch condition is cleared and before it can be re-enabled. It is only meaningful when aluPcmResetMode is auto." DEFVAL { 1 } ::= { aluPcmEntry 7 } aluPcmRedMode OBJECT-TYPE SYNTAX INTEGER { manual (1), auto (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "aluPcmRedMode specifies the redundant mode of the bridge. In auto mode, both master branches are active; one could be for voice and another one for data. In manual mode, only one master branch can be active; User can use aluPcmForceActive to set a particular master as active." DEFVAL { manual } ::= { aluPcmEntry 8 } -- -- ALU PCM table -- aluPortCemStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluPortCemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains SAR specific CEM Port statistics." ::= { aluPortObjs 26 } aluPortCemStatsEntry OBJECT-TYPE SYNTAX AluPortCemStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry contains 7705 SAR specific cem stats." AUGMENTS { tmnxPortCemStatsEntry } ::= { aluPortCemStatsTable 1 } AluPortCemStatsEntry ::= SEQUENCE { aluPortCemStatsEgressSamplingDoneCnt Counter32, aluPortCemStatsEgressAdjustDoneCnt Counter32 } aluPortCemStatsEgressSamplingDoneCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluPortCemStatsEgressSamplingDoneCnt indicates the number of times the sampling is done for asymetric delay control." ::= { aluPortCemStatsEntry 1 } aluPortCemStatsEgressAdjustDoneCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluPortCemStatsEgressAdjustDoneCnt indicates the number of times the adjustment is done for asymetric delay control." ::= { aluPortCemStatsEntry 2 } -- -- RS232 Socket Table -- aluRS232SocketTable OBJECT-TYPE SYNTAX SEQUENCE OF AluRS232SocketEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluRS232SocketTable has an entry for a Socket entity belonging to a particular Serial channel." ::= { aluPortObjs 27 } aluRS232SocketEntry OBJECT-TYPE SYNTAX AluRS232SocketEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Socket on a particular interface. Entries can be created and deleted via SNMP SET operations using the aluRS232SocketRowStatus object. For each aluRS232SocketEntry, there will be a corresponding entry in the tmnxPortTable and the ifTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluRS232SocketTable 1 } AluRS232SocketEntry ::= SEQUENCE { aluRS232SocketRowStatus RowStatus, aluRS232SocketLastChangeTime TimeStamp, aluRS232SocketEopLength Unsigned32, aluRS232SocketEopIdleTimeout Unsigned32, aluRS232SocketEopSpecialChar Unsigned32, aluRS232SocketSquelchDelay Unsigned32, aluRS232SocketUnsquelchDelay Unsigned32, aluRS232SocketInterSessionDelay Unsigned32, aluRS232SocketSquelchStatus INTEGER, aluRS232SocketSquelchReset TmnxActionType } aluRS232SocketRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "aluRS232SocketRowStatus controls the creation and deletion of row entries in the aluRS232SocketTable. The tmnxPortPortID for a Socket includes a socket ID in the lower bits. The manager has to first calculate the tmnxPortPortID based on the TiMOS encoding scheme." ::= { aluRS232SocketEntry 1 } aluRS232SocketLastChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluRS232SocketLastChangeTime indicates the time, since system startup, that the configuration of this Socket was created or modified." ::= { aluRS232SocketEntry 2 } aluRS232SocketEopLength OBJECT-TYPE SYNTAX Unsigned32 (1..1500) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketEopLength specifies the maximum number of bytes (characters) that may be received from the Serial data stream. If and when reached, EOP (end of packet) is assumed and handled accordingly." DEFVAL { 1500 } ::= { aluRS232SocketEntry 3 } aluRS232SocketEopIdleTimeout OBJECT-TYPE SYNTAX Unsigned32 (10..5000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketEopIdleTimeout specifies the maximum period of idle time that may elapse since the last received character from the Serial data stream. If and when reached, EOP (end of packet) is assumed and handled accordingly." DEFVAL { 50 } ::= { aluRS232SocketEntry 4 } aluRS232SocketEopSpecialChar OBJECT-TYPE SYNTAX Unsigned32 (0..255|4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketEopSpecialChar specifies the numerical value for the character, considered special, that may be received from the Serial data stream. If and when received, EOP (end of packet) is recognized and handled accordingly. The value 0xFFFFFFFF means disabled (ie. no character is special)." DEFVAL { 4294967295 } ::= { aluRS232SocketEntry 5 } aluRS232SocketSquelchDelay OBJECT-TYPE SYNTAX Unsigned32 (1..120|4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketSquelchDelay specifies the period of time that a continuous data stream is allowed to be received before squelch is applied. When squelch is applied, the system suppresses the channel from receiving any more data. The value 0xFFFFFFFF means disabled (ie. squelch will not get applied and any concurrent squelch will get cleared immediately)." DEFVAL { 4294967295 } ::= { aluRS232SocketEntry 6 } aluRS232SocketUnsquelchDelay OBJECT-TYPE SYNTAX Unsigned32 (1..120|4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketUnsquelchDelay specifies the period of time that squelch will persist before it gets cleared automatically. The value 0xFFFFFFFF means disabled (ie. squelch will not get cleared automatically)." DEFVAL { 4294967295 } ::= { aluRS232SocketEntry 7 } aluRS232SocketInterSessionDelay OBJECT-TYPE SYNTAX Unsigned32 (0..5000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketInterSessionDelay specifies the nominal period of time to idle between transmitting the last bit of the current session and transmitting the first bit of the next session." DEFVAL { 10 } ::= { aluRS232SocketEntry 8 } aluRS232SocketSquelchStatus OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluRS232SocketSquelchStatus indicates the squelch status." ::= { aluRS232SocketEntry 9 } aluRS232SocketSquelchReset OBJECT-TYPE SYNTAX TmnxActionType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object aluRS232SocketSquelchReset specifies that a manual reset of squelch is to be triggered. Setting this object to the value of 'doAction' triggers the one-shot reset operation. Any concurrent squelch will get cleared immediately and aluRS232SocketSquelchDelay will restart accordingly. Reading this object will return the value of 'notApplicable'." DEFVAL { notApplicable } ::= { aluRS232SocketEntry 10 } -- -------------------------------------------------- -- dot1X Mac-Based Authentication Config table -- -------------------------------------------------- aluDot1xAuthConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AluDot1xAuthConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains dot1x PAE port information in the system." ::= { aluPortObjs 28 } aluDot1xAuthConfigEntry OBJECT-TYPE SYNTAX AluDot1xAuthConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row-entry that contains port specific dot1x PAE information." INDEX { dot1xPaePortNumber } ::= { aluDot1xAuthConfigTable 1 } AluDot1xAuthConfigEntry ::= SEQUENCE { aluDot1xAuthMacAuthEnabled TruthValue, aluDot1xAuthMacAuthWait Unsigned32 } aluDot1xAuthMacAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The value of aluDot1xAuthMacAuthEnabled specifies whether a dot1x enabled ethernet port can aithenticate itself using MAC based authentication methods. MAC based authentication will only occur if no EAP frames are recieved on the port indicating the connected supplicant does not support DOT1x authentication." DEFVAL { false } ::= { aluDot1xAuthConfigEntry 1 } aluDot1xAuthMacAuthWait OBJECT-TYPE SYNTAX Unsigned32 (0..3600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluDot1xAuthMacAuthWait specifies the period of time that no EAP packets must be recieved in order start MAC Based Authentication on the port. aluDot1xAuthMacAuthEnabled must be set to 'true' before this value is used." DEFVAL { 0 } ::= { aluDot1xAuthConfigEntry 2 } -- -------------------------------------------------- -- dot1X Mac-Based Authentication Stats table -- -------------------------------------------------- aluDot1xAuthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AluDot1xAuthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains dot1x PAE port information in the system." ::= { aluPortObjs 29 } aluDot1xAuthStatsEntry OBJECT-TYPE SYNTAX AluDot1xAuthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row-entry that contains port specific dot1x PAE information." INDEX { dot1xPaePortNumber } ::= { aluDot1xAuthStatsTable 1 } AluDot1xAuthStatsEntry ::= SEQUENCE { aluDot1xAuthLastAuthMethod INTEGER, aluDot1xAuthMacAuthFramesRx Unsigned32 } aluDot1xAuthLastAuthMethod OBJECT-TYPE SYNTAX INTEGER { none (0), eap (1), mac (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluDot1xAuthLastAuthMethod indicates the last authentication method of the port. (0) - Never authenticated (1) - EAP - DOT1x EAPOL Frames (2) - Source MAC Based Authentication" ::= { aluDot1xAuthStatsEntry 1 } aluDot1xAuthMacAuthFramesRx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object aluDot1xAuthMacAuthFramesRx specifies the the number of ethernet frames recieved to perform MAC Authentication on." ::= { aluDot1xAuthStatsEntry 2 } -- -- ALU SCADA VCB table -- aluScadaVcbTable OBJECT-TYPE SYNTAX SEQUENCE OF AluScadaVcbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aluScadaVcbTable has an entry for each SCADA bridge, aluScadaBridgeEntry." ::= { aluPortObjs 30 } aluScadaVcbEntry OBJECT-TYPE SYNTAX AluScadaVcbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a Voice Conference Bridge (VCB) in the system. Entries cannot be created and deleted via SNMP SET operations. They are created automatically for SCADA MDAs, such as the ISC, when the MDA mode, aluExtTmnxMDACapabilityMode, is set to 'modeC' (ie. VCB). For each aluScadaVcbEntry, there will be a corresponding entry in the aluScadaBridgeTable." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluScadaVcbTable 1 } AluScadaVcbEntry ::= SEQUENCE { aluScadaVcbIdleCode Unsigned32, aluScadaVcbSeizedCode Unsigned32, aluScadaVcbSignalMode INTEGER } aluScadaVcbIdleCode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluScadaVcbIdleCode specifies the signaling code transmitted on all branches of the bridge indicating idle. It is also used to interpret received signaling codes from the branches. This object is valid only while aluExtTmnxMDAVcbApplication is 'vcbBranchInitiate'. The object is a bitmap arranged as follows: bit pos: | 7 6 5 4 3 2 1 0 | | x x x x A B C D | 'x' - don't care The default value depends on aluExtTmnxMDAVoiceCompandingLaw: For muLaw - 0 (or 0x0 or 0b0000) For aLaw - 13 (or 0xD or 0b1101) " ::= { aluScadaVcbEntry 1 } aluScadaVcbSeizedCode OBJECT-TYPE SYNTAX Unsigned32 (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of the object aluScadaVcbSeizedCode specifies the signaling code transmitted on all branches of the bridge indicating seized. It is also used to interpret received signaling codes from the branches. This object is valid only while aluExtTmnxMDAVcbApplication is 'vcbBranchInitiate'. The object is a bitmap arranged as follows: bit pos: | 7 6 5 4 3 2 1 0 | | x x x x A B C D | 'x' - don't care The default value depends on aluExtTmnxMDAVoiceCompandingLaw: For muLaw - 15 (or 0xF or 0b1111) For aLaw - 5 (or 0x5 or 0b0101) " ::= { aluScadaVcbEntry 2 } aluScadaVcbSignalMode OBJECT-TYPE SYNTAX INTEGER { none (1), cas (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of aluScadaVcbSignalMode indicates the type of signalling associated with the bridge (aka channel): none - Indicates no signalling on this channel cas - Indicates Channel Associated Signalling (CAS) on this channel aluScadaVcbSignalMode is like tmnxDS1SignalMode but it's read-only." ::= { aluScadaVcbEntry 3 } -- -- ALU Extensions Ethernet BN Change table -- aluExtPortEtherBnChangeTable OBJECT-TYPE SYNTAX SEQUENCE OF AluExtPortEtherBnChangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the Nokia SAR series ethernet port Bandwidch Notification change table for providing, via SNMP, the capability of retrieving the changes resulted from the processing of incoming Eth-BN." ::= { aluPortObjs 31} aluExtPortEtherBnChangeEntry OBJECT-TYPE SYNTAX AluExtPortEtherBnChangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines an entry in aluExtPortEtherBnChangeTable. Entries are created and deleted by the system depending port configuration." INDEX { tmnxChassisIndex, tmnxPortPortID } ::= { aluExtPortEtherBnChangeTable 1 } AluExtPortEtherBnChangeEntry ::= SEQUENCE { aluExtPortEtherBnEgressRateInUse Integer32, aluExtPortEtherBnLastRateChangeTime TimeStamp, aluExtPortEtherBnLastMgsRxTime TimeStamp, aluExtPortEtherBnNumRateChanges Counter64, aluExtPortEtherBnNumMsgRx Counter64, aluExtPortEtherBnNumInvalidMsgRx Counter64, aluExtPortEtherBnNumBWOutOfRange Counter64 } aluExtPortEtherBnEgressRateInUse OBJECT-TYPE SYNTAX Integer32 UNITS "kilo-bits per second" MAX-ACCESS read-only STATUS current DESCRIPTION "When aluExtPortEtherBnAllowed is 'true', the value of aluExtPortEtherBnEgressRateInUse indicates the egress rate currently being enforced. aluExtPortEtherBnEgressRateInUse is set to the default value of '-1' to indicate tmnxPortEtherEgressRate is currently enforced. When the difference between the sysUpTime of a received Y.1731 ETH-BNM and the value of aluExtPortEtherBnLastRateChangeTime is greater than the configured aluExtPortEtherBnHoldTime, then aluExtPortEtherBnEgressRateInUse is modified to use the current rate in the Y.1731 ETH-BNM frame." DEFVAL { -1 } ::= { aluExtPortEtherBnChangeEntry 1 } aluExtPortEtherBnLastRateChangeTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherBnLastRateChangeTime contains the sysUpTime value as time stamp of the most recently modified aluExtPortEtherBnEgressRateInUse of this port." ::= { aluExtPortEtherBnChangeEntry 2 } aluExtPortEtherBnLastMgsRxTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherBnLastMgsRxTime contains the sysUpTime value as time stamp of the most recently received valid Y.1731 ETH-BNM frame at this port. This frame may or may not cause the change of aluExtPortEtherBnLastRateChangeTime. " ::= { aluExtPortEtherBnChangeEntry 3 } aluExtPortEtherBnNumRateChanges OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherBnNumRateChanges is the number of times the Y.1731 ETH-BNM has changed the egress rate aluExtPortEtherBnEgressRateInUse at this port while aluExtPortEtherBnAllowed was set to 'true'. aluExtPortEtherBnNumRateChanges is reset to 0 when aluExtPortEtherBnAllowed modified to 'false', or when clear port stats, or when the port is deleted." ::= { aluExtPortEtherBnChangeEntry 4 } aluExtPortEtherBnNumMsgRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherBnNumMsgRx has the number of valid Y.1731 ETH-BNM received at this port since aluExtPortEtherBnAllowed was set to 'true'. aluExtPortEtherBnNumMsgRx is reset to 0 when aluExtPortEtherBnAllowed modified to 'false', or when clear port stats, or when the port is deleted." ::= { aluExtPortEtherBnChangeEntry 5 } aluExtPortEtherBnNumInvalidMsgRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherBnNumInvalidMsgRx has the number of invvalid Y.1731 ETH-BNM received and dropped at this port since aluExtPortEtherBnAllowed was set to 'true'. aluExtPortEtherBnNumInvalidMsgRx is reset to 0 when aluExtPortEtherBnAllowed modified to 'false', or when clear port stats, or when the port is deleted." ::= { aluExtPortEtherBnChangeEntry 6 } aluExtPortEtherBnNumBWOutOfRange OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "aluExtPortEtherBnNumBWOutOfRange has the number of Y.1731 ETH-BNM received with bandwidth requested being bigger than the maximum bandwidth supported by the port, as well as those frames with bandwidth requested being smaller than the minimum bandwidth supported at this port . aluExtPortEtherBnNumBWOutOfRange is reset to 0 when aluExtPortEtherBnAllowed modified to 'false', or when clear port stats, or when the port is deleted." ::= { aluExtPortEtherBnChangeEntry 7 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Notification Definition section -- -- -- Port Notification Objects -- aluPortEtherSfpESyncCompatibility NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluExtPortEtherSfpSyncEStatus } STATUS current DESCRIPTION "Generated when a SFP is installed in a MDA that supports synchronous ethernet operation." ::= { aluPortNotificationObjects 1 } aluPortNotifyRS232AlarmReason OBJECT-TYPE SYNTAX INTEGER { notUsed (0), hcmOof (1), hcmRai (2), ctrlLeadMon (3), monClockDev (4), monDataInac (5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used by alu RS232 Port Notifications, the value of aluPortNotifyRS232AlarmReason indicates the reason a RS232 interface alarm has been raised." ::= { aluPortNotificationObjects 2 } aluPortNotifyDataAlarmReason OBJECT-TYPE SYNTAX INTEGER { notUsed (0), ais (1), los (2), rai (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used by alu Data Port Notifications, the value of aluPortNotifyDataAlarmReason indicates the reason a Data interface alarm has been raised." ::= { aluPortNotificationObjects 3 } aluPortNotifyRS232ControlLeadsSignalChange OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object aluPortNotifyRS232ControlLeadsSignalChange is a printable character string." ::= { aluPortNotificationObjects 4 } -- -- ALU-PORT-MIB Notifications -- -- -- Equipment Alarms -- aluEqPortRS232Alarm NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluPortNotifyRS232AlarmReason } STATUS current DESCRIPTION "Generated when a RS232 interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in aluRS232ReportAlarm." ::= { aluPortNotification 1 } aluEqPortRS232AlarmClear NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluPortNotifyRS232AlarmReason } STATUS current DESCRIPTION "Generated when a RS232 interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in aluRS232ReportAlarm." ::= { aluPortNotification 2 } aluRS232LoopbackStarted NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluRS232Loopback } STATUS current DESCRIPTION "The aluRS232LoopbackStarted notification is generated when a loopback is provisioned on a RS-232/V.35/X.21/RS-530 port." ::= { aluPortNotification 3 } aluRS232LoopbackStopped NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluRS232Loopback } STATUS current DESCRIPTION "The aluRS232LoopbackStopped notification is generated when a loopback is removed on a RS-232/V.35/X.21/RS-530 port. The value of aluRS232Loopback specifies the type of loopback that was configured and has now been removed." ::= { aluPortNotification 4 } aluVoiceLoopbackStarted NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluVoiceLoopback } STATUS current DESCRIPTION "The aluVoiceLoopbackStarted notification is generated when a loopback is provisioned on a voice port." ::= { aluPortNotification 5 } aluVoiceLoopbackStopped NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluVoiceLoopback } STATUS current DESCRIPTION "The aluVoiceLoopbackStopped notification is generated when a loopback is removed on a voice port. The value of aluVoiceLoopback specifies the type of loopback that was configured and has now been removed." ::= { aluPortNotification 6 } aluGponPortInbandAlarm NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluGponPortG984SerialNumber } STATUS current DESCRIPTION "Generated when an alarm condition is detected on the inband signaling mechanism between the ONT and SAR" ::= { aluPortNotification 7 } aluGponPortInbandAlarmClear NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluGponPortG984SerialNumber } STATUS current DESCRIPTION "Generated when an alarm condition is cleared on the inband signaling mechanism between the ONT and SAR" ::= { aluPortNotification 8 } aluEqPortDataAlarm NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluPortNotifyDataAlarmReason } STATUS current DESCRIPTION "Generated when a Data interface alarm condition is detected. It is generated only when the type of alarm being raised is enabled in aluDataReportAlarm." ::= { aluPortNotification 9 } aluEqPortDataAlarmClear NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluPortNotifyDataAlarmReason } STATUS current DESCRIPTION "Generated when a Data interface alarm condition is cleared. It is generated only when the type of alarm being cleared is enabled in aluDataReportAlarm." ::= { aluPortNotification 10 } aluDataLoopbackStarted NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluDataLoopback } STATUS current DESCRIPTION "The aluDataLoopbackStarted notification is generated when a loopback is provisioned on a Data port." ::= { aluPortNotification 11 } aluDataLoopbackStopped NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluDataLoopback } STATUS current DESCRIPTION "The aluDataLoopbackStopped notification is generated when a loopback is removed on a Data port. The value of aluDataLoopback specifies the type of loopback that was configured and has now been removed." ::= { aluPortNotification 12 } aluExtPethPsePortStatusChange NOTIFICATION-TYPE OBJECTS { pethPsePortDetectionStatus, pethPsePortPowerClassifications, aluExtPethPsePortFaultReason } STATUS current DESCRIPTION "Generated when there is a change in Power Classification, Detection Status, Fault Reason, or Oper Status on a power ethernet port." ::= { aluPortNotification 13 } aluSerialMddbSquelchStatusChanged NOTIFICATION-TYPE OBJECTS { aluSerialMddbSquelchStatus } STATUS current DESCRIPTION "The aluSerialMddbSquelchStatusChanged notification is generated when the Squelch Status of a scada bridge is changed. The value of aluSerialMddbSquelchStatus indicates the new squelch status detected." ::= { aluPortNotification 14 } aluSerialMddbSquelchResetIssued NOTIFICATION-TYPE OBJECTS { aluSerialMddbSquelchStatus } STATUS current DESCRIPTION "The aluSerialMddbSquelchResetIssued notification is generated when user reset the squelch of the scada bridge. The value of aluSerialMddbSquelchStatus indicates the existing squelch status." ::= { aluPortNotification 15 } aluGnssPortStatusChange NOTIFICATION-TYPE OBJECTS { aluGnssPortSyncStatus, aluGnssPortAntennaStatus, aluGnssPortReceiverStatus } STATUS current DESCRIPTION "The aluGnssPortStatusChange notification is generated when there is a change in the status of the GNSS receiver. This notification is a point-in-time status change event. [CAUSE] This notification may be triggered for a variety of reasons including (but not limited to): 1) The antenna is experiencing fault issues 2) The number of visible satellites is too low [EFFECT] The GNSS receiver is not able to provide a sync-worthy clock signal. [RECOVERY] If the customer is expecting the GNSS receiver to be locked, the customer will need to determine the root cause (for example, insufficient visible satellites) and resolve the issue (for example, ensure aluGnssPortElevationMaskAngle is set accordingly)." ::= { aluPortNotification 16 } aluPcmSquelchStatusChanged NOTIFICATION-TYPE OBJECTS { aluPcmSquelchStatus } STATUS current DESCRIPTION "The aluPcmSquelchStatusChanged notification is generated when the Squelch Status of a scada bridge is changed. The value of aluPcmSquelchStatus indicates the new squelch status detected." ::= { aluPortNotification 17 } aluPcmSquelchResetIssued NOTIFICATION-TYPE OBJECTS { aluPcmSquelchStatus } STATUS current DESCRIPTION "The aluPcmSquelchResetIssued notification is generated when user reset the squelch of the scada bridge. The value of aluPcmSquelchStatus indicates the existing squelch status." ::= { aluPortNotification 18 } aluRS232ControlLeadsSignalChange NOTIFICATION-TYPE OBJECTS { aluPortNotifyRS232ControlLeadsSignalChange } STATUS current DESCRIPTION "The aluRS232ControlLeadsSignalChange notification is generated when there is a change in the status of a Serial control lead signal. This notification is a point-in-time status change event. [CAUSE] This notification may be triggered for a variety of reasons. One example is that the far-end equipment has been disconnected. [EFFECT] Alert user of transitions. [RECOVERY] Determine root cause and resolve accordingly." ::= { aluPortNotification 19 } aluRS232SquelchStatusChange NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluRS232SocketSquelchStatus } STATUS current DESCRIPTION "The aluRS232SquelchStatusChange notification is generated when there is a change in the status of squelch on the respective channel. This notification is a point-in-time status change event. [CAUSE] This notification may be triggered for the following reasons: 1) A continuous stream of data is being received for a specified period of time, aluRS232SocketSquelchDelay. 2) The continuous stream of data is no longer being received for a specified period of time, aluRS232SocketUnsquelchDelay. [EFFECT] Incoming data will be suppressed or unsuppressed accordingly. [RECOVERY] Determine root cause of far-end sending continuous data and resolve accordingly." ::= { aluPortNotification 20 } aluRS232SquelchResetIssued NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluRS232SocketSquelchStatus } STATUS current DESCRIPTION "The aluRS232SquelchResetIssued notification is generated when the user triggers a manual reset of squelch via aluRS232SocketSquelchReset. The value of aluRS232SocketSquelchStatus indicates the existing squelch status." ::= { aluPortNotification 21 } aluRS232ClockSyncStateChange NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluRS232ClockSyncState } STATUS current DESCRIPTION "The aluRS232ClockSyncStateChange notification is generated when the aluRS232ClockSyncState changes for an RS232 interface." ::= { aluPortNotification 22 } aluExtDS0ChanGrpLoopbackStarted NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluExtDS0ChanGroupLoopback } STATUS current DESCRIPTION "The aluExtDS0ChanGrpLoopbackStarted notification is generated when a loopback is provisioned on a DS0 channel group." ::= { aluPortNotification 23 } aluExtDS0ChanGrpLoopbackStopped NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, aluExtDS0ChanGroupLoopback } STATUS current DESCRIPTION "The aluExtDS0ChanGrpLoopbackStopped notification is generated when a loopback is removed on a DS0 channel group. The value of aluExtDS0ChanGroupLoopback specifies the type of loopback that was configured and has now been removed." ::= { aluPortNotification 24 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- The compliance specifications. -- aluPortCompliances OBJECT IDENTIFIER ::= { aluPortConformance 1 } aluPortGroups OBJECT IDENTIFIER ::= { aluPortConformance 2 } aluPortComp7705 OBJECT IDENTIFIER ::= { aluPortCompliances 1 } -- aluPortComp7705V1v0 OBJECT IDENTIFIER ::= { aluPortComp7705 1} -- aluPortComp7705V1v1 OBJECT IDENTIFIER ::= { aluPortComp7705 2} -- aluPortComp7705V2v0 OBJECT IDENTIFIER ::= { aluPortComp7705 3} -- aluPortComp7705V2v1 OBJECT IDENTIFIER ::= { aluPortComp7705 4} -- aluPortComp7705V3v0 OBJECT IDENTIFIER ::= { aluPortComp7705 5} -- aluPortComp7705V4v0 OBJECT IDENTIFIER ::= { aluPortComp7705 6} -- aluPortComp7705V5v0 OBJECT IDENTIFIER ::= { aluPortComp7705 7} -- aluPortComp7705V6v0 OBJECT IDENTIFIER ::= { aluPortComp7705 8} -- aluPortComp7705V6v1 OBJECT IDENTIFIER ::= { aluPortComp7705 9} -- aluPortComp7705V7v0 OBJECT IDENTIFIER ::= { aluPortComp7705 10} -- aluPortComp7705V8v0 OBJECT IDENTIFIER ::= { aluPortComp7705 11} -- aluPortComp7705V9v0 OBJECT IDENTIFIER ::= { aluPortComp7705 12} aluPortComp7705V1v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 1.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtDS1PortLineImpedanceGroup, aluPortDiscardStatsGroup } ::= { aluPortComp7705 1 } aluPortComp7705V1v1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 1.1 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtPortEtherSfpSyncEGroup, aluPortAcrClkStatsGroup } ::= { aluPortComp7705 2 } aluPortComp7705V2v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 2.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtDS1HoldTimeGroup } ::= { aluPortComp7705 3 } aluPortComp7705V2v1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 2.1 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluRS232GroupV2v1, aluPortNotificationGroupV2v1, aluExtPortCemGroupV2v1, aluPortNotifyObjsGroupV2v1, aluExtPortEtherLoopbackGroupV2v1 } ::= { aluPortComp7705 4 } aluPortComp7705V3v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 3.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluVoiceGroup, aluVoiceNotifGroup, aluRS232MultiDropGroup, aluPortDiscardStatsGroupV3v0, aluPortNetControlStatsGroupV3v0, aluRS232SBitSignalingGroup, aluRS232DataPositionGroup } ::= { aluPortComp7705 5 } aluPortComp7705V4v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 4.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluExtPortEtherLoopbackGroupV4v0, aluPortEtherSfpSyncECompatibilityGroup } ::= { aluPortComp7705 6 } aluPortComp7705V5v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 5.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluGponGroupV5v0, aluDslGroupV5v0, aluGponStatsGroupV5v0, aluDslStatsGroupV5v0, aluDslGponNotificationGroupV5v0, aluVoiceTeleprotectionGroup, aluDataGroup, aluDataNotifGroup, aluExtDS0ChanGroupSignalModeGroup, aluPortCtlStatsGroup, aluExtPortEtherLoopbackGroupV5v0, aluDataPortNotifyObjsGroup } ::= { aluPortComp7705 7 } aluPortComp7705V6v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 6.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluPortEthernetGroupV6v0, aluPortDiscardStatsGroupV6v0, aluPortEtherXorGroupV6v0, aluPwrEthPortGroupV6v0, aluRS232HoldTimeGroup, aluExtPethPsePortNotificationGroupV6v0 } ::= { aluPortComp7705 8 } aluPortComp7705V6v1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 6.1 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluGnssPortGroup, aluPortDiscardStatsGroupV6v1, aluScadaBridgeNotificationGroupV6v1, aluGnssPortNotifGroup } ::= { aluPortComp7705 9 } aluPortComp7705V7v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 7.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluRS232ControlLeadsNotifGroup, aluGnssPortReceiverFwVersGroup } ::= { aluPortComp7705 10 } aluPortComp7705V8v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 8.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluRS232SocketGroup, aluRS232SocketNotifGroup, aluRS232SocketStatsGroup, aluDot1xAuthGroup, aluScadaVcbGroup, aluScadaBranchGainGroup } ::= { aluPortComp7705 11 } aluPortComp7705V9v0 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for revision 9.0 of ALU-PORT-MIB." MODULE -- this module MANDATORY-GROUPS { aluRS232ClockSyncGroup, aluRS232ClockSyncNotifGroup, aluRS232InvertClockGroup, aluRS232MonClockDataGroup, aluScadaNameGroup, aluExtDS0ChanGroupLoopbackGroup, aluExtDS0ChanGrpLpbckNotifGroup, aluPortPtpTimestampStatsV9v0Group } ::= { aluPortComp7705 12 } -- units of conformance aluExtDS1PortLineImpedanceGroup OBJECT-GROUP OBJECTS { aluExtDS1PortLineImpedance } STATUS current DESCRIPTION "The group of objects supporting management of the line impedance of DS1/E1 physical ports on Nokia SAR series systems." ::= { aluPortGroups 1 } aluPortDiscardStatsGroup OBJECT-GROUP OBJECTS { aluPortInL2AddrProtoDiscards, aluPortInMPLSLabelDiscards, aluPortInIPAddrProtoDiscards, aluPortInVlanIdDiscards, aluPortInHdlcCrcDiscards, aluPortOutPortMtuDiscards, aluPortInCsmQHiPriDiscards, aluPortInCsmQLowPriDiscards, aluPortInCsmQFtpPriDiscards, aluPortOutCsmQDiscards, aluPortInOtherDiscards, aluPortOutOtherDiscards } STATUS obsolete DESCRIPTION "The group of objects supporting retrieval of the detailed packet discard statistics on Nokia SAR series systems" ::= { aluPortGroups 2 } aluExtPortEtherSfpSyncEGroup OBJECT-GROUP OBJECTS { aluExtPortEtherSfpSyncEStatus } STATUS current DESCRIPTION "The group of objects supporting the management of the capabilities of synchronous operations with respect to the installed SFP's." ::= { aluPortGroups 3 } aluPortEtherSfpSyncECompatibilityGroup NOTIFICATION-GROUP NOTIFICATIONS { aluPortEtherSfpESyncCompatibility } STATUS current DESCRIPTION "The group of notifications supporting the management of Synchronous Ethernet with respect to installed SFP's on the Nokia 7705 SAR." ::= { aluPortGroups 4 } aluPortAcrClkStatsGroup OBJECT-GROUP OBJECTS { aluLastUpdateTime, aluTotalMinutesIn24Hour, aluCurrent24HourFreqOffsetMeanPpb, aluCurrent24HourFreqOffsetStdDevPpb, aluMaxShortIntervalMinutes, aluTotalShortIntervalMinutes, aluCurrent1MinValidData, aluCurrent1MinPhaseErrorMeanPpb, aluCurrent1MinPhaseErrorStdDevNs, aluCurrent1MinPhaseErrorMeanNs, aluCurrent1MinFreqOffsetMeanPpb, aluCurrent1MinFreqOffsetStdDevPpb, aluIntervalNumber, aluIntervalValidData, aluIntervalUpdateTime, aluIntervalPhaseErrorMeanPpb, aluIntervalPhaseErrorStdDevNs, aluIntervalPhaseErrorMeanNs, aluIntervalFreqOffsetMeanPpb, aluIntervalFreqOffsetStdDevPpb } STATUS current DESCRIPTION "The group of objects supporting retrieval of the ACR clock statistic on Nokia SAR series systems" ::= { aluPortGroups 5 } aluExtDS1HoldTimeGroup OBJECT-GROUP OBJECTS { aluExtDS1HoldTimeUp, aluExtDS1HoldTimeDown } STATUS current DESCRIPTION "The group of objects supporting management of hold-time capabilities on Nokia SAR series systems." ::= { aluPortGroups 6 } aluRS232GroupV2v1 OBJECT-GROUP OBJECTS { aluRS232PortLastChangeTime, aluRS232PortType, aluRS232RowStatus, aluRS232LastChangeTime, aluRS232Type, aluRS232DeviceMode, aluRS232DeviceGender, aluRS232Duplex, aluRS232Speed, aluRS232ClockSource, aluRS232Loopback, aluRS232CharacterLength, aluRS232Parity, aluRS232StopBits, aluRS232ReportAlarm, aluRS232ReportAlarmStatus, aluRS232ControlLeadDtrDsr, aluRS232ControlLeadRtsDcdC, aluRS232ControlLeadAlbCts, aluRS232ControlLeadRdlRi, aluRS232ControlLeadDsrDtr, aluRS232ControlLeadDcdRtsI, aluRS232ControlLeadCtsAlb, aluRS232ControlLeadRiRdl, aluRS232ChanGroupRowStatus, aluRS232ChanGroupTimeSlots, aluRS232ChanGroupMTU, aluRS232ChanGroupOperMTU, aluRS232ChanGroupCRC, aluRS232ChanGroupIdleCycleFlags, aluRS232ChanGroupPayloadFillType, aluRS232ChanGroupPayloadPattern, aluRS232ControlLeadsState } STATUS current DESCRIPTION "The group of objects supporting management of Serial type ports for version 2.1 on Nokia SAR series systems" ::= { aluPortGroups 7 } aluPortNotificationGroupV2v1 NOTIFICATION-GROUP NOTIFICATIONS { aluEqPortRS232Alarm, aluEqPortRS232AlarmClear, aluRS232LoopbackStarted, aluRS232LoopbackStopped } STATUS current DESCRIPTION "The group of notifications supporting the management of physical ports for revision 2.1 on Nokia SAR series systems." ::= { aluPortGroups 8 } aluExtPortCemGroupV2v1 OBJECT-GROUP OBJECTS { aluExtDS1SignalBitsState } STATUS current DESCRIPTION "The group of objects supporting management of CEM encapsulation TDM type ports for revision 2.1 on Nokia SAR series systems." ::= { aluPortGroups 9 } aluVoiceGroup OBJECT-GROUP OBJECTS { aluVoicePortLastChangeTime, aluVoicePortType, aluVoicePortAudioWires, aluVoicePortTlpRx, aluVoicePortTlpTx, aluVoiceRowStatus, aluVoiceLastChangeTime, aluVoiceType, aluVoiceSignalingMode, aluVoiceLoopback, aluVoiceFaultSignaling, aluVoiceSignalBitsState, aluVoiceClockSource, aluVoiceChanGroupRowStatus, aluVoiceChanGroupMTU, aluVoiceChanGroupOperMTU, aluVoiceSignalingLeadE, aluVoiceSignalingLeadM, aluVoiceSignalingLeadsState, aluVoiceSignalMode, aluVoiceCallState, aluVoiceIncomingCallCount, aluVoiceIncomingCallCountAns, aluVoiceIncomingCallTime, aluVoiceIncomingCallTimeAns, aluVoiceOutgoingCallCount, aluVoiceOutgoingCallCountAns, aluVoiceOutgoingCallTime, aluVoiceOutgoingCallTimeAns, aluVoiceOutOfServiceTime, aluVoiceIdleTime, aluVoiceTotalCallCount, aluVoiceTotalCallTime, aluVoiceIdleCode, aluVoiceSeizedCode } STATUS current DESCRIPTION "The group of objects supporting management of Voice type ports on Nokia SAR series systems." ::= { aluPortGroups 10 } aluVoiceNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluVoiceLoopbackStarted, aluVoiceLoopbackStopped } STATUS current DESCRIPTION "The group of notifications supporting management of Voice type ports on Nokia SAR series systems." ::= { aluPortGroups 11 } aluPortNotifyObjsGroupV2v1 OBJECT-GROUP OBJECTS { aluPortNotifyRS232AlarmReason } STATUS current DESCRIPTION "The group of objects supporting physical port notifications for revision 2.1 on Nokia SAR series systems." ::= { aluPortGroups 12 } aluExtPortEtherLoopbackGroupV2v1 OBJECT-GROUP OBJECTS { aluExtPortEtherLoopback, aluExtPortEtherLoopbackTimer, aluExtPortEtherLoopbackTimeLeft } STATUS obsolete DESCRIPTION "The group of objects supporting management of loopbacks for ethernet ports for revision 2.1 on Nokia SAR series systems." ::= { aluPortGroups 13 } aluExtPortEtherNwSchedulingGroup OBJECT-GROUP OBJECTS { aluExtPortEtherNwSchedulerMode } STATUS current DESCRIPTION "The group of objects supporting management of egress scheduling of ports on Nokia SAR series systems." ::= { aluPortGroups 14 } aluRS232MultiDropGroup OBJECT-GROUP OBJECTS { aluRS232MultiDrop } STATUS current DESCRIPTION "The group of objects supporting management of multi-drop data bridge mode on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 15 } aluPortDiscardStatsGroupV3v0 OBJECT-GROUP OBJECTS { aluPortInL2AddrProtoDiscards, aluPortInMPLSLabelDiscards, aluPortInIPAddrProtoDiscards, aluPortInVlanIdDiscards, aluPortInHdlcCrcDiscards, aluPortOutPortMtuDiscards, aluPortInCsmQHiPriDiscards, aluPortInCsmQMediumPriDiscards, aluPortInCsmQLowPriDiscards, aluPortOutCsmQDiscards, aluPortInOtherDiscards, aluPortOutOtherDiscards } STATUS obsolete DESCRIPTION "The group of objects supporting retrieval of the detailed packet discard statistics on Nokia SAR series systems" ::= { aluPortGroups 16 } aluPortObsoletedGroupV3v0 OBJECT-GROUP OBJECTS { aluPortInCsmQFtpPriDiscards } STATUS current DESCRIPTION "The group of objects obsoleted in the 7705 SAR series 3.0 release" ::= { aluPortGroups 17 } aluPortNetControlStatsGroupV3v0 OBJECT-GROUP OBJECTS { aluPortNetIngressControlFwdPkts, aluPortNetIngressControlFwdOcts, aluPortNetIngressControlDroPkts, aluPortNetIngressControlDroOcts, aluPortNetEgressControlFwdPkts, aluPortNetEgressControlFwdOcts, aluPortNetEgressControlDroPkts, aluPortNetEgressControlDroOcts } STATUS current DESCRIPTION "The group of objects supporting retrieval of ingress and egress control traffic statistics in the Nokia SAR series 3.0 release" ::= { aluPortGroups 18 } aluRS232SBitSignalingGroup OBJECT-GROUP OBJECTS { aluRS232SBitSignaling } STATUS current DESCRIPTION "The group of objects supporting management of S-bit signaling mode on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 19 } aluRS232DataPositionGroup OBJECT-GROUP OBJECTS { aluRS232DataPosition } STATUS current DESCRIPTION "The group of objects supporting management of S-bit signaling mode on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 20 } aluExtPortEtherLoopbackGroupV4v0 OBJECT-GROUP OBJECTS { aluExtPortEtherLoopback, aluExtPortEtherLoopbackTimer, aluExtPortEtherLoopbackTimeLeft, aluExtPortEtherLoopbackCfmLbMode, aluExtPortEtherCfmLbmRx, aluExtPortEtherCfmLbmDropped, aluExtPortEtherCfmLbrTx, aluExtPortEtherLoopbackSwapMacAddr } STATUS obsolete DESCRIPTION "The group of objects supporting management of loopbacks for ethernet ports for revision 4.0 on Nokia SAR series systems." ::= { aluPortGroups 21 } aluGponGroupV5v0 OBJECT-GROUP OBJECTS { aluGponPortG984SerialNumber, aluGponPortSubsLocId, aluGponPortActiveSwVersion, aluGponPortPonStatus, aluGponPortOntEnetStatus, aluGponPortOntEnetSpeed } STATUS current DESCRIPTION "The group of objects supporting management of GPON ports for revision 5.0 on Nokia SAR series systems." ::= { aluPortGroups 22 } aluDslGroupV5v0 OBJECT-GROUP OBJECTS { aluDslPortBondingType, aluDslPortBondingState, aluDslPortBondingBitRateUS, aluDslPortBondingBitRateDS, aluDslPortAtmVpi, aluDslPortAtmVci, aluDslPortAtmF5OamLoopback, aluDslPortAtmF5OamLoopbackStatus, aluDslPortAtmF5OamLoopbackTime, aluDslPortNtrDslLineID, aluDslPortNtrLockedStatus, aluDslPortNtrStdDev, aluDslPortNtrMaxError, aluDslPortNtrMinError, aluDslPortAdsl2Plus, aluDslPortNtrSampleClockPeriod, aluDslPortNtrErrorHistory, aluXdslLineOperState, aluXdslLineState, aluXdslLineProtocol, aluXdslLineVdslProfile, aluXdslLineTpsTcType, aluXdslLineInBondingGroup, aluXdslLineBitRateUS, aluXdslLineSnrMarginUS, aluXdslLineOutputPowerUS, aluXdslLineRefPsdUS, aluXdslLineLoopDelayUS, aluXdslLineFailureUS, aluXdslLineB0DelayUS, aluXdslLineB0InpUS, aluXdslLineBitRateDS, aluXdslLineSnrMarginDS, aluXdslLineOutputPowerDS, aluXdslLineRefPsdDS, aluXdslLineLoopDelayDS, aluXdslLineFailureDS, aluXdslLineB0DelayDS, aluXdslLineB0InpDS, aluXdslLineAdminState, aluShdslLineDataRate, aluShdslLineState, aluShdslLineNegotiatedConst, aluShdslLineUsedCaplist, aluShdslLineRegion, aluShdslLineCaplistMode, aluShdslLineTpsTcType, aluShdslLineInBondingGroup, aluShdslLineAdminState, aluShdslLineLineAttenuation, aluShdslLineRxSNRMargin, aluShdslLinePowerBackOffValue } STATUS current DESCRIPTION "The group of objects supporting management of DSL ports for revision 5.0 on Nokia SAR series systems." ::= { aluPortGroups 23 } aluGponStatsGroupV5v0 OBJECT-GROUP OBJECTS { aluGponPortCurrentLastUpdTime, aluGponPortCurrentPMEnabled, aluGponPortCurrentTxFrames, aluGponPortCurrentRxFrames, aluGponPortCurrentTxBytes, aluGponPortCurrentRxBytes, aluGponPortCurrentDropFrsUp, aluGponPortCurrentDropFrsDn, aluGponPortCurrentTxFrsMcast, aluGponPortCurrentRxFrsMcast, aluGponPortCurrentFCSEs, aluGponPortCurrentECs, aluGponPortCurrentLCs, aluGponPortCurrentFTLs, aluGponPortCurrentRBOs, aluGponPortCurrentTBOs, aluGponPortCurrentSCFs, aluGponPortCurrentMCFs, aluGponPortCurrentSQEs, aluGponPortCurrentDTs, aluGponPortCurrentIMTEs, aluGponPortCurrentCSEs, aluGponPortCurrentAEs, aluGponPortCurrentIMREs, aluGponPortCurrentLostFragsDn, aluGponPortCurrentLostFragsUp, aluGponPortCurrentRxFrags, aluGponPortCurrentRxBlocks, aluGponPortCurrentTxBlocks, aluGponPortCurrentTxFrags, aluGponPortCurrentBadHeaders, aluGponPortPreviousLastUpdTime, aluGponPortPreviousPMEnabled, aluGponPortPreviousTxFrames, aluGponPortPreviousRxFrames, aluGponPortPreviousTxBytes, aluGponPortPreviousRxBytes, aluGponPortPreviousDropFrsUp, aluGponPortPreviousDropFrsDn, aluGponPortPreviousTxFrsMcast, aluGponPortPreviousRxFrsMcast, aluGponPortPreviousFCSEs, aluGponPortPreviousECs, aluGponPortPreviousLCs, aluGponPortPreviousFTLs, aluGponPortPreviousRBOs, aluGponPortPreviousTBOs, aluGponPortPreviousSCFs, aluGponPortPreviousMCFs, aluGponPortPreviousSQEs, aluGponPortPreviousDTs, aluGponPortPreviousIMTEs, aluGponPortPreviousCSEs, aluGponPortPreviousAEs, aluGponPortPreviousIMREs, aluGponPortPreviousLostFragsDn, aluGponPortPreviousLostFragsUp, aluGponPortPreviousRxFrags, aluGponPortPreviousRxBlocks, aluGponPortPreviousTxBlocks, aluGponPortPreviousTxFrags, aluGponPortPreviousBadHeaders } STATUS current DESCRIPTION "The group of objects supporting retrieval of the GPON statistics for revision 5.0 on Nokia SAR series systems." ::= { aluPortGroups 24 } aluDslStatsGroupV5v0 OBJECT-GROUP OBJECTS { aluXdslLineStatsNearEndFECS, aluXdslLineStatsNearEndLOSS, aluXdslLineStatsNearEndES, aluXdslLineStatsNearEndSES, aluXdslLineStatsNearEndUAS, aluXdslLineStatsNearEndAS, aluXdslLineStatsNearEndLOFS, aluXdslLineStatsNearEndLPRS, aluXdslLineStatsNearEndLEFTRS, aluXdslLineStatsFarEndFECS, aluXdslLineStatsFarEndLOSS, aluXdslLineStatsFarEndES, aluXdslLineStatsFarEndSES, aluXdslLineStatsFarEndUAS, aluXdslLineStatsFarEndAS, aluXdslLineStatsFarEndLOFS, aluXdslLineStatsFarEndLPRS, aluXdslLineStatsFarEndLEFTRS, aluXdslLineStatsFarEndLEFTRS, aluXdslLineStatsUpTime, aluShdslLineStatsLinkLoss, aluShdslLineStatsCVError, aluShdslLineStatsES, aluShdslLineStatsSES, aluShdslLineStatsLOSWS, aluShdslLineStatsUAS, aluShdslLineStatsInvalidDataFlag } STATUS current DESCRIPTION "The group of objects supporting retrieval of the DSL Line statistics for revision 5.0 on Nokia SAR series systems." ::= { aluPortGroups 25 } aluDslGponNotificationGroupV5v0 NOTIFICATION-GROUP NOTIFICATIONS { aluGponPortInbandAlarm, aluGponPortInbandAlarmClear } STATUS current DESCRIPTION "The group of notifications supporting the management of GPON ports for revision 5.0 on Nokia SAR series systems." ::= { aluPortGroups 26 } aluVoiceTeleprotectionGroup OBJECT-GROUP OBJECTS { aluVoicePortLineBalance, aluVoicePortRingGeneration, aluVoicePortSignalingType } STATUS current DESCRIPTION "The group of additional voice objects supporting the new Voice and Teleprotection MDA introduced in Release 5.0 of the Nokia SAR series systems." ::= { aluPortGroups 27 } aluDataGroup OBJECT-GROUP OBJECTS { aluDataPortLastChangeTime, aluDataPortType, aluDataRowStatus, aluDataLastChangeTime, aluDataType, aluDataClockSource, aluDataTiming8k, aluDataReportAlarm, aluDataReportAlarmStatus, aluDataLoopback, aluDataChanGroupRowStatus, aluDataChanGroupLastChangeTime, aluDataChanGroupMTU, aluDataChanGroupOperMTU, aluDataChanGroupPayloadFillType, aluDataChanGroupPayloadPattern, aluDataChanGroupTimeSlots } STATUS current DESCRIPTION "The group of objects supporting management of TDM Data type ports introduced in Release 5.0 of the Nokia SAR series systems." ::= { aluPortGroups 28 } aluDataNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluEqPortDataAlarm, aluEqPortDataAlarmClear, aluDataLoopbackStarted, aluDataLoopbackStopped } STATUS current DESCRIPTION "The group of notifications supporting management of TDM Data type ports introduced in Release 5.0 of the Nokia SAR series systems." ::= { aluPortGroups 29 } aluPortCtlStatsGroup OBJECT-GROUP OBJECTS { aluPortAccessCtlInFwdPkts, aluPortAccessCtlInFwdOcts, aluPortAccessCtlInDroPkts, aluPortAccessCtlInDroOcts, aluPortAccessCtlEgrFwdPkts, aluPortAccessCtlEgrFwdOcts, aluPortAccessCtlEgrDroPkts, aluPortAccessCtlEgrDroOcts } STATUS current DESCRIPTION "The group of objects supporting management of access port Control packet statistics introduced in Release 5.0 of the Nokia SAR series systems." ::= { aluPortGroups 30 } aluFrStatsGroupV5v0 OBJECT-GROUP OBJECTS { aluFrIfRxFrames, aluFrIfRxOctets, aluFrIfRxDEFrames, aluFrIfRxDEOctets, aluFrIfRxFECNFrames, aluFrIfRxBECNFrames, aluFrIfTxFrames, aluFrIfTxOctets, aluFrIfTxDEFrames, aluFrIfTxDEOctets, aluFrIfTxFECNFrames, aluFrIfTxBECNFrames, aluFrIfRxDiscardsInvalidDlci, aluFrIfRxLastInvalidDlci, aluFrIfRxDiscardsCrcErrors, aluFrIfRxDiscardsAlignmentErrors, aluFrIfRxDiscardsLengthViolations, aluFrIfRxDiscardsIllegalHeader, aluFrIfRxDiscardsOtherErrors, aluFrIfTxDiscardsUnderruns, aluFrIfTxDiscardsOtherErrors, aluExtFrCircuitReceivedCrcDiscards, aluExtFrCircuitReceivedAborts, aluExtFrCircuitReceivedOtherDiscards, aluExtFrCircuitSentAborts, aluExtFrCircuitSentFECNs, aluExtFrCircuitSentBECNs, aluExtFrCircuitReceivedDEOctets, aluExtFrCircuitSentDEOctets } STATUS current DESCRIPTION "The group of objects supporting retrieval of the frame relay statistics for revision 5.0 on Nokia SAR series systems." ::= { aluPortGroups 31 } aluExtPortEtherSyncGroup OBJECT-GROUP OBJECTS { aluExtPortEtherAdminPhyTxClock, aluExtPortEtherOperPhyTxClock } STATUS current DESCRIPTION "The group of objects supporting the management of the synchronous Ethernet on copper interfaces." ::= { aluPortGroups 32 } aluEthPtpTimestampStatsGroup OBJECT-GROUP OBJECTS { aluEthPtpInSyncPktTimestamped, aluEthPtpOutSyncPktTimestamped, aluEthPtpInDelReqPktTimestamped, aluEthPtpOutDelReqPktTimestamped, aluEthPtpInFcsErrorCount, aluEthPtpOutFcsErrorCount } STATUS obsolete DESCRIPTION "The group of objects supporting retrieval of the IEEE1588 PTP transparent clock statistic on Nokia SAR series systems" ::= { aluPortGroups 33 } aluEthPtpTimestampGroup OBJECT-GROUP OBJECTS { aluEthPtpTimestampCapable, aluEthPtpTimestampEnable, aluEthPtpAsymmetry } STATUS current DESCRIPTION "The group of objects supporting management of IEEE1588 PTP Transparent Clock function for ethernet ports on Nokia SAR series systems." ::= { aluPortGroups 34 } aluExtDS0ChanGroupSignalModeGroup OBJECT-GROUP OBJECTS { aluExtDS0ChanGroupSignalMode } STATUS current DESCRIPTION "The group of objects supporting signal mode for ds0 chan groups Nokia SAR series systems." ::= { aluPortGroups 35 } aluExtPortEtherLoopbackGroupV5v0 OBJECT-GROUP OBJECTS { aluExtPortEtherLoopback, aluExtPortEtherLoopbackTimer, aluExtPortEtherLoopbackTimeLeft, aluExtPortEtherLoopbackCfmLbMode, aluExtPortEtherCfmLbmRx, aluExtPortEtherCfmLbmDropped, aluExtPortEtherCfmLbrTx, aluExtPortEtherLoopbackSwapMacAddr, aluExtPortEtherLoopbackPersist } STATUS obsolete DESCRIPTION "The group of objects supporting management of loopbacks for ethernet ports for revision 5.0 on 7705 Nokia systems." ::= { aluPortGroups 36 } aluPortEthernetGroupV6v0 OBJECT-GROUP OBJECTS { aluPortEtherIngressRateCbs, aluPortEtherIngressRateSrcPause, aluPortEtherEgrUnshapedSapCir, aluPortCfmLbVlanRowStatus, aluExtPortEtherCfmLbVlanList } STATUS obsolete DESCRIPTION "The group of objects supporting management of ethernet ports on Nokia SAR series systems." ::= { aluPortGroups 37 } aluPortDiscardStatsGroupV6v0 OBJECT-GROUP OBJECTS { aluPortInL2AddrProtoDiscards, aluPortInMPLSLabelDiscards, aluPortInIPAddrProtoDiscards, aluPortInVlanIdDiscards, aluPortInHdlcCrcDiscards, aluPortOutPortMtuDiscards, aluPortInCsmQHiPriDiscards, aluPortInCsmQMediumPriDiscards, aluPortInCsmQLowPriDiscards, aluPortOutCsmQDiscards, aluPortInOtherDiscards, aluPortOutOtherDiscards, aluPortInHardPolicerDiscards } STATUS current DESCRIPTION "The group of objects supporting retrieval of the detailed packet discard statistics on Nokia SAR series systems" ::= { aluPortGroups 38 } aluPortEtherXorGroupV6v0 OBJECT-GROUP OBJECTS { aluPortEtherXorMode, aluPortEtherOperXorMode } STATUS current DESCRIPTION "The group of objects supporting management of XOR mode for ethernet ports for revision 6.0 on 7705 Nokia systems." ::= { aluPortGroups 39 } aluExtDS1E1SsmGroup OBJECT-GROUP OBJECTS { aluExtDS1E1Ssm, aluExtDS1E1SsmTxDus, aluExtE1SsmSaBit, aluExtDs1E1TxSsmValue, aluExtDs1E1RxSsmValue, aluExtPortSsmTxQualityLevel } STATUS current DESCRIPTION "The group of objects supporting management of port that support Synchronous Status Messages (SSM) on 7705 Nokia systems." ::= { aluPortGroups 40 } aluPwrEthPortGroupV6v0 OBJECT-GROUP OBJECTS { aluExtPethPsePortFaultReason, aluExtPethPsePortPowerLevel, aluExtPethPsePortPowerConsumption, aluExtPethPsePortMaximumPower } STATUS current DESCRIPTION "The group of objects supporting management of power ethernet ports for revision 6.0 on 7705 Nokia systems." ::= { aluPortGroups 41 } aluRS232HoldTimeGroup OBJECT-GROUP OBJECTS { aluRS232HoldTimeUp, aluRS232HoldTimeDown } STATUS current DESCRIPTION "The group of objects supporting management of hold-time capabilities on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 42 } aluEthPtpTimestampStatsGroupV6v0 OBJECT-GROUP OBJECTS { aluEthPtpInSyncPktTimestamped, aluEthPtpOutSyncPktTimestamped, aluEthPtpInDelReqPktTimestamped, aluEthPtpOutDelReqPktTimestamped } STATUS current DESCRIPTION "The group of objects supporting retrieval of the IEEE1588 PTP transparent clock statistic on Nokia SAR series systems" ::= { aluPortGroups 43 } aluVlanFilterPortGroup OBJECT-GROUP OBJECTS { aluExtPortEtherVlanFilter } STATUS current DESCRIPTION "The group of objects supporting management of VLAN filter capabilities on Bridged Ethernet ports on Nokia SAR series systems." ::= { aluPortGroups 44 } aluScadaBridgeGroupV6v1 OBJECT-GROUP OBJECTS { aluScadaBridgeType, aluScadaBridgeAdminStatus, aluScadaBridgeOperStatus, aluScadaBridgeDescription, aluSerialMddbReportAlarms, aluSerialMddbForceActive, aluSerialMddbSquelchStatus, aluSerialMddbSquelchEnable, aluSerialMddbSquelchTimeout, aluSerialMddbSquelchReset, aluSerialMddbSpeed, aluScadaBranchRowStatus, aluScadaBranchAdminStatus, aluScadaBranchOperStatus, aluScadaBranchMultiDrop, aluScadaBranchAlarmStatus, aluScadaBranchDescription, aluScadaBranchEncapType, aluScadaBranchMode } STATUS obsolete DESCRIPTION "The group of objects supporting management of scada bridges for version 6.1 on Nokia SAR series systems" ::= { aluPortGroups 45 } aluExtPethPsePortNotificationGroupV6v0 NOTIFICATION-GROUP NOTIFICATIONS { aluExtPethPsePortStatusChange } STATUS current DESCRIPTION "The group of notifications supporting the management of power ethernet Pse ports for revision 6.0 on Nokia SAR series systems." ::= { aluPortGroups 46 } aluPortNetRingGroupV6v0 OBJECT-GROUP OBJECTS { aluPortNetRingAddDropFwdInProfPkts, aluPortNetRingAddDropFwdOutProfPkts, aluPortNetRingAddDropFwdInProfOcts, aluPortNetRingAddDropFwdOutProfOcts, aluPortNetRingAddDropDroInProfPkts, aluPortNetRingAddDropDroOutProfPkts, aluPortNetRingAddDropDroInProfOcts, aluPortNetRingAddDropDroOutProfOcts } STATUS current DESCRIPTION "The group of objects supporting port statistics specific to ring Network Ports for revision 6.0 on 7705 Nokia systems." ::= { aluPortGroups 47 } aluPortEtherQosGroupV6v0 OBJECT-GROUP OBJECTS { aluPortEtherIngressRateCbs, aluPortEtherIngressRateSrcPause, aluPortEtherEgrUnshapedSapCir } STATUS current DESCRIPTION "The group of objects supporting management of ethernet ports on Nokia SAR series systems." ::= { aluPortGroups 48 } aluPortEtherLoopbackGroupV6v0 OBJECT-GROUP OBJECTS { aluExtPortEtherLoopback, aluExtPortEtherLoopbackTimer, aluExtPortEtherLoopbackTimeLeft, aluExtPortEtherLoopbackCfmLbMode, aluExtPortEtherCfmLbmRx, aluExtPortEtherCfmLbmDropped, aluExtPortEtherCfmLbrTx, aluExtPortEtherLoopbackSwapMacAddr, aluExtPortEtherLoopbackPersist, aluExtPortEtherCfmLbVlanList } STATUS current DESCRIPTION "The group of objects supporting management of loopbacks for ethernet ports for revision 6.0 on 7705 Nokia systems." ::= { aluPortGroups 49 } aluScadaBridgeNotificationGroupV6v1 NOTIFICATION-GROUP NOTIFICATIONS { aluSerialMddbSquelchStatusChanged, aluSerialMddbSquelchResetIssued } STATUS obsolete DESCRIPTION "The group of notifications supporting the management of scada bridges for revision 6.1 on Nokia SAR series systems." ::= { aluPortGroups 50 } aluPortEtherQosGroupV6v1 OBJECT-GROUP OBJECTS { aluExtPortEtherAccEgrShaper, aluExtPortEtherNetEgrShaper, aluPortEtherEgrUnshapedNwIfCir } STATUS current DESCRIPTION "The group of objects supporting QOS management of ethernet ports on Nokia SAR series systems." ::= { aluPortGroups 51 } aluGnssPortGroup OBJECT-GROUP OBJECTS { aluGnssPortLastChangeTime, aluGnssPortType, aluGnssPortAntennaCableDelay, aluGnssPortElevationMaskAngle, aluGnssPortVisibleSatelliteCount, aluGnssPortUsedSatelliteCount, aluGnssPortAntennaStatus, aluGnssPortSyncStatus, aluGnssPortPositionLatitude, aluGnssPortPositionLongitude, aluGnssPortPositionAltitude, aluGnssPortDateAndTime, aluGnssPortReceiverStatus, aluGnssPortCurUtcOffset, aluGnssPortCurUtcOffsetValid } STATUS current DESCRIPTION "The group of objects supporting management of GNSS type ports on Nokia SAR series systems." ::= { aluPortGroups 52 } aluPortDiscardStatsGroupV6v1 OBJECT-GROUP OBJECTS { aluPortInL2MacDADiscards, aluPortInL2ETypeDiscards } STATUS current DESCRIPTION "The group of objects supporting retrieval of the detailed packet discard statistics for revision 6.1 on Nokia SAR series systems" ::= { aluPortGroups 53 } aluPortObsoleteGroupV6v0 OBJECT-GROUP OBJECTS { aluEthPtpInFcsErrorCount, aluEthPtpOutFcsErrorCount, aluPortCfmLbVlanId, aluPortCfmLbVlanRowStatus } STATUS current DESCRIPTION "The group of objects obsoleted in the 7705 SAR series 6.0 release" ::= { aluPortGroups 54 } aluDataPortNotifyObjsGroup OBJECT-GROUP OBJECTS { aluPortNotifyDataAlarmReason } STATUS current DESCRIPTION "The group of objects supporting TDM Data type port notifications introduced for release 5.0 on Nokia SAR series systems." ::= { aluPortGroups 55 } aluGnssPortNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluGnssPortStatusChange } STATUS current DESCRIPTION "The group of notifications supporting the management of GNSS ports for revision 6.1 on Nokia SAR series systems." ::= { aluPortGroups 56 } aluScadaBridgeGroupV7v1 OBJECT-GROUP OBJECTS { aluScadaBridgeType, aluScadaBridgeAdminStatus, aluScadaBridgeOperStatus, aluScadaBridgeDescription, aluSerialMddbReportAlarms, aluSerialMddbForceActive, aluSerialMddbSquelchStatus, aluSerialMddbSquelchEnable, aluSerialMddbSquelchTimeout, aluSerialMddbSquelchReset, aluSerialMddbSpeed, aluSerialMddbSquelchResetMode, aluSerialMddbSquelchResetTimeout, aluSerialMddbRedMode, aluPcmForceActive, aluPcmSquelchStatus, aluPcmSquelchEnable, aluPcmSquelchTimeout, aluPcmSquelchReset, aluPcmSquelchResetMode, aluPcmSquelchResetTimeout, aluPcmRedMode, aluScadaBranchRowStatus, aluScadaBranchAdminStatus, aluScadaBranchOperStatus, aluScadaBranchMultiDrop, aluScadaBranchAlarmStatus, aluScadaBranchDescription, aluScadaBranchEncapType, aluScadaBranchMode } STATUS current DESCRIPTION "The group of objects supporting management of scada bridges for version 6.1 on Nokia SAR series systems" ::= { aluPortGroups 57 } aluScadaBridgeNotificationGroupV7v1 NOTIFICATION-GROUP NOTIFICATIONS { aluSerialMddbSquelchStatusChanged, aluSerialMddbSquelchResetIssued, aluPcmSquelchStatusChanged, aluPcmSquelchResetIssued } STATUS current DESCRIPTION "The group of notifications supporting the management of scada bridges for revision 7.0 on Nokia SAR series systems." ::= { aluPortGroups 58 } aluExtDS1PortLineEncodingGroup OBJECT-GROUP OBJECTS { aluExtDS1PortLineEncoding } STATUS current DESCRIPTION "The group of objects supporting management of the line encoding of DS1/E1 physical ports on Nokia SAR series systems." ::= { aluPortGroups 59 } aluPortCemStatsGroup OBJECT-GROUP OBJECTS { aluPortCemStatsEgressSamplingDoneCnt, aluPortCemStatsEgressAdjustDoneCnt } STATUS current DESCRIPTION "The group of objects which provides 7705 specific cem stats." ::= { aluPortGroups 60 } aluRS232ControlLeadsSignalGroup OBJECT-GROUP OBJECTS { aluRS232ControlLeadsSignal } STATUS current DESCRIPTION "The group of objects supporting management of control lead signals on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 61 } aluPortEtherQosGroupV7v1 OBJECT-GROUP OBJECTS { aluExtPortEtherEgrRateIncludeFCS } STATUS current DESCRIPTION "The group of objects supporting QOS management of ethernet ports for revision 7.0 on Nokia SAR series systems." ::= { aluPortGroups 62 } aluRS232ControlLeadsNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluRS232ControlLeadsSignalChange } STATUS current DESCRIPTION "The group of notifications supporting the management of Serial control leads on Nokia SAR series systems." ::= { aluPortGroups 63 } aluRS232ControlLeadsNotifObjsGroup OBJECT-GROUP OBJECTS { aluPortNotifyRS232ControlLeadsSignalChange } STATUS current DESCRIPTION "The group of objects supporting Serial control leads notifications introduced for release 7.0 on Nokia SAR series systems." ::= { aluPortGroups 64 } aluRS232ControlLeadsMonGroup OBJECT-GROUP OBJECTS { aluRS232ControlLeadMonDtrDsr, aluRS232ControlLeadMonRtsDcdC, aluRS232ControlLeadMonAlbCts, aluRS232ControlLeadMonRdlRi } STATUS current DESCRIPTION "The group of objects supporting management of monitoring control leads on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 65 } aluRS232SocketGroup OBJECT-GROUP OBJECTS { aluRS232SocketRowStatus, aluRS232SocketLastChangeTime, aluRS232SocketEopLength, aluRS232SocketEopIdleTimeout, aluRS232SocketEopSpecialChar, aluRS232SocketSquelchDelay, aluRS232SocketUnsquelchDelay, aluRS232SocketInterSessionDelay, aluRS232SocketSquelchStatus, aluRS232SocketSquelchReset } STATUS current DESCRIPTION "The group of objects supporting management of Serial socket channels on Nokia SAR series systems." ::= { aluPortGroups 66 } aluRS232SocketNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluRS232SquelchStatusChange, aluRS232SquelchResetIssued } STATUS current DESCRIPTION "The group of notifications supporting the management of Serial socket channels on Nokia SAR series systems." ::= { aluPortGroups 67 } aluDot1xAuthGroup OBJECT-GROUP OBJECTS { aluDot1xAuthMacAuthEnabled, aluDot1xAuthMacAuthWait, aluDot1xAuthLastAuthMethod, aluDot1xAuthMacAuthFramesRx } STATUS current DESCRIPTION "The group of objects supporting management of Mac-Based Authentication on Nokia SAR series systems." ::= { aluPortGroups 68 } aluRS232SocketStatsGroup OBJECT-GROUP OBJECTS { aluRS232SocketRxChars, aluRS232SocketTxChars, aluRS232SocketEopIdleTimeoutCnt, aluRS232SocketEopLengthCnt, aluRS232SocketEopSpecialCharCnt, aluRS232SocketIngrForwardedPkts, aluRS232SocketEgrForwardedPkts, aluRS232SocketIngrDroppedPkts, aluRS232SocketEgrDroppedPkts, aluRS232SocketSquelchCnt } STATUS current DESCRIPTION "The group of objects supporting retrieval of the detailed RS232Socket statistics on Nokia SAR series systems." ::= { aluPortGroups 69 } aluGnssPortReceiverFwVersGroup OBJECT-GROUP OBJECTS { aluGnssPortReceiverFwVersion } STATUS current DESCRIPTION "The group of objects supporting retrieval of the version of firmware running on a particular GNSS receiver module on Nokia SAR series systems." ::= { aluPortGroups 70 } aluScadaVcbGroup OBJECT-GROUP OBJECTS { aluScadaVcbIdleCode, aluScadaVcbSeizedCode, aluScadaVcbSignalMode } STATUS current DESCRIPTION "The group of objects supporting management of SCADA VCBs on Nokia SAR series systems." ::= { aluPortGroups 71 } aluScadaBranchGainGroup OBJECT-GROUP OBJECTS { aluScadaBranchGainInput, aluScadaBranchGainOutput, aluScadaBranchGainSidetoneEnable } STATUS current DESCRIPTION "The group of objects supporting management of signal gain on SCADA branches on Nokia SAR series systems." ::= { aluPortGroups 72 } aluPortEtherQosGroupV8v1 OBJECT-GROUP OBJECTS { aluExtPortEtherBnAllowed, aluExtPortEtherBnHoldTime, aluExtPortEtherBnEgressRateInUse, aluExtPortEtherBnLastRateChangeTime, aluExtPortEtherBnLastMgsRxTime, aluExtPortEtherBnNumRateChanges, aluExtPortEtherBnNumMsgRx, aluExtPortEtherBnNumInvalidMsgRx, aluExtPortEtherBnNumBWOutOfRange } STATUS current DESCRIPTION "The group of objects supporting QOS management of ethernet ports for revision 8.0 on Nokia SAR series systems." ::= { aluPortGroups 73 } aluPortLsrIpLoadBalGroupV8v0 OBJECT-GROUP OBJECTS { aluLsrIpLoadBalBtmOfStk, aluLsrIpLoadBalIngressPort } STATUS current DESCRIPTION "The group of objects supporting management of lsr load balancing on Alcatel-Lucent SAR series systems" ::= { aluPortGroups 74 } aluRS232ClockSyncGroup OBJECT-GROUP OBJECTS { aluRS232ClockSyncState, aluRS232ClockMasterPortId } STATUS current DESCRIPTION "The group of objects supporting clock synchronization objects on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 75 } aluRS232ClockSyncNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluRS232ClockSyncStateChange } STATUS current DESCRIPTION "The group of notifications supporting clock synchronization objects on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 76 } aluRS232InvertClockGroup OBJECT-GROUP OBJECTS { aluRS232InvertClock } STATUS current DESCRIPTION "The group of objects supporting clock inversion objects on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 77 } aluPortEtherObsoleteV9v0Group OBJECT-GROUP OBJECTS { aluEthPtpAsymmetry } STATUS obsolete DESCRIPTION "The objects which were obsoleted for revision 9.0 on Nokia 7705 SROS series systems." ::= { aluPortGroups 78 } aluRS232MonClockDataGroup OBJECT-GROUP OBJECTS { aluRS232MonClockDeviationRaise, aluRS232MonClockDeviationClear, aluRS232MonDataInactivityRaise, aluRS232MonDataInactivityClear } STATUS current DESCRIPTION "The group of objects supporting monitor of clock and data faults on Serial type ports on Nokia SAR series systems." ::= { aluPortGroups 79 } aluScadaNameGroup OBJECT-GROUP OBJECTS { aluScadaBridgeName, aluScadaBranchName } STATUS current DESCRIPTION "The group of objects supporting names of Scada entities on Nokia SAR series systems." ::= { aluPortGroups 80 } aluExtDS0ChanGroupLoopbackGroup OBJECT-GROUP OBJECTS { aluExtDS0ChanGroupLoopback } STATUS current DESCRIPTION "The group of objects supporting loopbacks on DS0 channel groups on Nokia SAR series systems." ::= { aluPortGroups 81 } aluExtDS0ChanGrpLpbckNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { aluExtDS0ChanGrpLoopbackStarted, aluExtDS0ChanGrpLoopbackStopped } STATUS current DESCRIPTION "The group of notifications supporting management of DS0 channel group loopbacks on Nokia SAR series systems." ::= { aluPortGroups 82 } aluPortNgeGroup OBJECT-GROUP OBJECTS { aluPortNgeL2KeygroupTxFrames, aluPortNgeL2KeygroupTxBytes, aluPortNgeL2KeygroupRxFrames, aluPortNgeL2KeygroupRxBytes, aluPortNgeL2KGRxDropOtherFrames, aluPortNgeL2KGRxDropOtherBytes, aluPortNgeL2KeygroupTxDropFrames, aluPortNgeL2KeygroupTxDropBytes, aluPortNgeL2KGRxDrpInvldSpiFrms, aluPortNgeL2KGRxDrpInvldSpiBytes } STATUS current DESCRIPTION "The group of objects supporting group encryption stats on a port." ::= { aluPortGroups 83 } aluPortPtpTimestampStatsV9v0Group OBJECT-GROUP OBJECTS { aluEthPtpOutFollowUpPktTimestamped } STATUS current DESCRIPTION "The group was introduced in release 9 of Nokia SAR series systems to support management of the PTP IPv6 two-step functionality." ::= { aluPortGroups 84 } END